Rosemount DP Level Transmitters and 1199 Seal Systems

Product Data Sheet 

00813-0100-4016, Rev MB 

September 2012 Rosemount DP Level 

Rosemount DP Level Transmitters and 

1199 Seal Systems 

FOR ROSEMOUNT 3051S, 3051, AND 2051 

TRANSMITTERS 

APPLICATIONS 

• Level, Flow, Pressure, Interface, Density 

• Extreme hot and cold temperatures 

• Corrosive, clogging, or viscous processes 

• Hygienic requirements 

• Special process connections 

www.rosemount.com 

Contents 

Proven, Reliable, and Innovative DP Level Technologies . . . . . . . . . . . . . . . . . . . . . page 2 

Ordering Information 

Rosemount 3051S Electronic Remote Sensor System. . . . . . . . . . . . . . . . . . page 4 

Rosemount 3051S Scalable Level Transmitter . . . . . . . . . . . . . . . . . . . . . . . page 15 

Rosemount 3051L Level Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 32 

Rosemount 2051L Level Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 38 

Rosemount 1199 Direct Mount Seal Systems. . . . . . . . . . . . . . . . . . . . . . . . page 43 

Rosemount 1199 Remote Mount Seal Systems . . . . . . . . . . . . . . . . . . . . . . page 48 

Flanged Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 54 

Threaded Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 70 

Hygienic Seals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 74 

Specialty Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 84 

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 89 

Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 100 

Dimensional Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 114

Rosemount DP Level 

2 


00813-0100-4016, Rev MB 

September 2012 

Proven, Reliable, and Innovative DP Level Technologies 

To meet your application requirements, Rosemount DP level technologies deliver an unsurpassed product offering 

that is easy to specify, order, and install. The offering includes a wide variety of process connections, direct mount 

or capillary connections, and materials of construction to address almost any application. If you don’t see what you 

need listed here, ask us. We can create a custom engineered solution to meet your needs. 

Rosemount Level Transmitters 

Level transmitters combine world-class Rosemount pressure instrumentation with direct-mount seals, all in a single 

integrated model number. 

Balanced System Tuned-System Assembly 

Two equal lengths 

of capillary 

Direct mount 

plus capillary 

Rosemount 3051S Electronic Remote Sensor Systems 

Rosemount 3051SAL, 3051L, and 2051L Level Transmitters 

• Achieve best-in-class system reliability with All-Welded systems 

• Wireless configurations provide new data access 

• Connect to virtually any process with a comprehensive offering of 

process connections, fill fluids, direct mount or capillary 

connections, and materials 

• Quantify and optimize total system performance with QZ option 

Rosemount Tuned-System Assemblies Optimize Results 

• Reduce installed costs by 20% by eliminating excess capillary and 

transmitter mounting hardware 

• Improve performance by up to 30% 

• Increase response time by up to 80% 

• Reduce risk with up-front quantified performance reports 

The Rosemount 3051S ERS System is a new digital DP Level architecture that links two 3051S pressure sensors 

together electronically. Differential pressure, level, and volume is calculated and transmitted using a standard 

two-wire 4-20 mA HART signal. 

A Digital Upgrade to a Proven Technology 

• 90% improvement in time response 

• Elimination of temperature effects and measurement drift 

• MultiVariable capabilities including DP, PLO, PHI, Volume, and Level 

• Proven 3051S sensor technology 

Simplified Installations and Maintenance Routines 

• Elimination of wet legs or dry legs 

• Easy installations without need for heat tracing and insulation 

• Proactive maintenance and troubleshooting with sensor alerts and diagnostics 

• Simplified inventories with sensors and standard cable


00813-0100-4016, Rev MB 


Rosemount 1199 Seal Systems 


A seal system consists of a pressure transmitter, one or two seals, a fill fluid, and either a direct mount or capillary 

style connection. Seal systems provide a reliable process pressure measurement and prevent the process medium 

from contacting the transmitter diaphragm. Transmitter/diaphragm seal systems should be considered when: 

• The process temperature is outside of the operating ranges of the transmitter. 

• The process is corrosive and/ or requires specific exotic materials of construction. 

• The process contains suspended solids or is viscous and is prone to plugging of connections. 

• The application requires the use of flush-mount hygienic connections that facilitates CIP/SIP service. 

• There is a requirement for easier cleaning of the process from the connections to avoid contamination 

between batches. 

Application Flexibility 

• Flanged, threaded, and hygienic process connections 

• Meets industry standards such as EN 1092-1, ANSI/ASME 

B16.5, JIS B2238, ANSI/ASME B1.20.1, EN 10226-1, and 

3-A Standard 74-03 

• Variety of fill fluids including cold temperature 

(-102 °F / -75 °C), hot temperature (599 °F / 315 °C), and 

hygienic & food grade 

• Three different capillary diameters allow for optimization of 

accuracy and time response 

Reliable System Construction 

• Welded design with no threaded connections 

• 100% Helium leak tested 

• Advanced manufacturing techniques ensure air-free, 

leak-tight system that is stable over time 

• Reliable operation in full vacuum applications 

Robust Seal Design 

• Backup convolutions on the diaphragm protect 

seal integrity 

• Recessed diaphragms reduce potential for 

handling damage 

• Advanced welding techniques improve reliability 

SST Armored, PVC Coated, 

Support Tube with Closed End 

(Ordering Codes M, N, and P) 

Table 15 on page 49 

SST Armored, Support Tube 

(Ordering Codes H, J, and K) 


SST Armored, PVC Coated 

(Ordering Codes E, F, and G) 


SST Armored 

(Ordering Codes B, C, and D) 


3


4 

1 

Coplanar 

3051SAM 


00813-0100-4016, Rev MB 


Rosemount 3051S Electronic Remote Sensor System 

In-Line 

Coplanar In-Line 

3 

3051SAL 

Secondary 

Primary 

3051SAL1PG4AA1A1020DFF71DA00M5 

3051SAM1ST2A2E11A2A 

The 3051S ERS System is a flexible, 2-wire 4-20 mA HART 

architecture that calculates differential pressure (DP) electronically 

using two pressure sensors that are linked together with a 

non-proprietary electrical wire. 

Ideal applications for the 3051S ERS System include tall vessels and 

distillation columns that have traditionally required long lengths of 

capillary or impulse piping. When used in these types of applications, 

the 3051S ERS System can deliver: 

• More accurate and repeatable DP measurements 

• Faster time response 

• Simplified installations 

• Reduced maintenance 

How to Order 

1. Choose two 3051S ERS transmitter models. These may be any 

combination of 3051SAM and 3051SAL models. 

2. Decide which model will be the ERS Primary (4-20 mA loop 

termination and optional LCD) and which will be the ERS 

Secondary. This will be specified by the “Configuration Type” 

code in each model number. 

3. Specify two full model numbers per the desired configuration. 

Additional Information 

Specifications: page 89 

Certifications: page 104 

Dimensional Drawings: page 114 

Rosemount 3051SAM Scalable ERS Measurement Transmitter 

• Coplanar and In-Line sensor module platforms 

• Variety of process connections including threaded NPT, flanges, manifolds, and 1199 remote 

seals 

• Available with 10-year stability and limited 12-year warranty 

Table 1. 3051SAM Scalable ERS Measurement Transmitter Ordering Information 

★ The Standard offering represents the most common models and options. The starred options (★) should be selected for best delivery. 

__The Expanded offering is subject to additional delivery lead time. 

Model Transmitter Type 

3051SAM Scalable ERS Measurement Transmitter 

Performance Class 

2 

Standard Standard 

1 Ultra: 0.025% span accuracy, 200:1 rangedown, 10-year stability, 12-year limited warranty ★ 

2 Classic: 0.055% span accuracy, 100:1 rangedown, 5-year stability ★ 

Configuration Type 


P Electronic Remote Sensor - Primary ★ 

S Electronic Remote Sensor - Secondary ★


00813-0100-4016, Rev MB 



Pressure Module Type Pressure Sensor Type 


G Coplanar Gage ★ 

T In-Line Gage ★ 

E 

Expanded 

In-Line Absolute ★ 

A Coplanar Absolute 

Pressure Range (1) 




Coplanar Gage In-Line Gage In-Line Absolute Coplanar Absolute 


1A N/A -14.7 to 30 psig 

(-1,0 to 2,06 bar) 

2A -250 to 250 inH2O 

(-623 to 623 mbar) 

3A -393 to 1000 inH2O 

(-0,98 to 2,49 bar) 

4A -14.2 to 300 psig 

(-0,98 to 20,7 bar) 

5A -14.2 to 2000 psig 

(-0,98 to 137,9 bar) 

-14.7 to 150 psig 

(-1,0 to 10,34 bar) 

-14.7 to 800 psig 

(-1,0 to 55,2 bar) 

-14.7 to 4000 psig 

(-1,0 to 275,8 bar) 

-14.7 to 10000 psig 

(-1,0 to 689,5 bar) 

0 to 30 psia 

(0 to 2,06 bar) 

0 to 150 psia 

(0 to 10,34 bar) 

0 to 800 psia 

(0 to 55,2 bar) 

0 to 4000 psia 

(0 to 275,8 bar) 

0 to 10000 psia 

(0 to 689,5 bar) 

0 to 30 psia 

★ 

(0 to 2,06 bar) 

0 to 150 psia 

★ 

(0 to 10,34 bar) 

0 to 800 psia 

★ 

(0 to 55,2 bar) 


★ 

(0 to 275,8 bar) 

N/A ★ 

Isolating Diaphragm 


2 (2) 316L SST ★ 

3 (2) Expanded 

Alloy C-276 ★ 

4 (3) Alloy 400 

5 (3)(4) Tantalum 

6 (3) 

Gold-plated Alloy 400 (includes Graphite-Filled PTFE O-Ring) 

7 (3) 

Gold-plated 316L SST 

Process Connection 

Coplanar Module Type In-Line Module Type 


000 None N/A ★ 

A11 (5) 

Assemble to Rosemount 305 Manifold Assemble to Rosemount 306 Manifold ★ 

A12 (5) 

Assemble to Rosemount 304 or AMF Manifold with SST 

Traditional Flange 

N/A ★ 

B11 (5)(6) 

Assemble to One Rosemount 1199 Remote Diaphragm 

Seal with SST transmitter flange 

Assemble to One Rosemount 1199 Remote 

Diaphragm 

E11 Coplanar Flange (CS), ¼-18 NPT, 316 SST Drain Vents ½ -14 NPT Female ★ 

E12 Coplanar Flange (SST), ¼-18 NPT, 316 SST Drain Vents N/A ★ 

E13 (2) 

Coplanar Flange (Cast C-276), ¼-18 NPT, Alloy C-276 

Drain Vents 

N/A ★ 

E14 Coplanar Flange (Cast Alloy 400), ¼-18 NPT, Alloy 

400/K-500 Drain Vents 

N/A ★ 

E15 (2) 

Coplanar Flange (SST), ¼-18 NPT, Alloy C-276 Drain 

Vents 

N/A ★ 

E16 (2) Coplanar Flange (CS), ¼-18 NPT, Alloy C-276 Drain Vents N/A ★ 

E21 Coplanar Flange (CS), RC ¼, 316 SST Drain Vents N/A ★ 

E22 Coplanar Flange (SST), RC ¼, 316 SST Drain Vents N/A ★ 

E23 (2) Coplanar Flange (Cast C-276), RC ¼, Alloy C-276 Drain 

Vents 

N/A ★ 

E24 Coplanar Flange (Cast Alloy 400), RC ¼, alloy 400/K-500 

Drain Vents 

N/A ★ 

E25 (2) 

Coplanar Flange (SST), RC ¼, Alloy C-276 Drain Vents N/A ★ 

★ 

5


6 


00813-0100-4016, Rev MB 



E26 (2) Coplanar Flange (CS), RC ¼, Alloy C-276 Drain Vents N/A ★ 

F12 Traditional Flange (SST), 1 /4-18 NPT, 316 SST Drain Vents N/A ★ 

F13 (2) 

Traditional Flange (Cast C-276), 1 /4-18 NPT, Alloy C-276 

Drain Vents 

N/A ★ 

F14 Traditional Flange (Cast Alloy 400), 1 /4-18 NPT, Alloy 

400/K-500 Drain Vents 

N/A ★ 

F15 (2) Traditional Flange (SST), 1 /4-18 NPT, Alloy C-276 Drain 

Vents 

N/A ★ 

F22 Traditional Flange (SST), RC ¼, 316 SST Drain Vents N/A ★ 

F23 (2) Traditional Flange (Cast C-276), RC ¼, Alloy C-276 Drain 

Vents 

N/A ★ 

F24 Traditional Flange (Cast Alloy 400), RC ¼, Alloy 400/K500 

Drain Vents 

N/A ★ 

F25 (2) Table 1. 3051SAM Scalable ERS Measurement Transmitter Ordering Information 



Traditional Flange (SST), RC ¼, Alloy C-276 Drain Vents N/A ★ 

F52 DIN-Compliant Traditional Flange (SST), ¼-18 NPT, 316 

Drain Vents, 7-16-in. Bolting 

N/A ★ 

G11 Vertical Mount Level Flange (SST), 2-in ANSI Class 150, 

316 SST Drain Vents 

G ½ A DIN 16288 Male (Range 1-4 Only) ★ 



N/A ★ 



N/A ★ 



N/A ★ 

G31 Vertical Mount Level Flange (SST), DIN-DN 50 PN 40, 316 

SST Drain Vents 

N/A ★ 

G41 


Vertical Mount Level Flange (SST), DIN-DN 80 PN 40, 316 

SST Drain Vents 

N/A ★ 

F11 Traditional Flange (CS), ¼-18 NPT, 316 SST Drain / Vents Non-Threaded Instrument Flange (I-Flange) 

F32 Bottom Vent Traditional Flange (SST), ¼-18 NPT, 316 SST 

Drain Vents 

N/A 

F42 Bottom Vent Traditional Flange (SST), RC ¼, 316 SST 

Drain Vents 

N/A 

F62 DIN-Compliant Traditional Flange (316 SST), ¼-18 NPT, 

316 Drain Vents, M10 Bolting 

N/A 

F72 DIN-Compliant Traditional Flange (316 SST), ¼-18 NPT, 

316 Drain Vents, M12 Bolting 

N/A 

Transmitter Output 


A 4–20 mA with digital signal based on HART protocol ★ 

Housing Style Material Conduit Entry Size 

Standard 

Housings for ERS Primary - Configuration Type code P 


1A PlantWeb Housing Aluminum 1 /2–14 NPT ★ 

1B PlantWeb Housing Aluminum M20 x 1.5 (CM 20) ★ 

1J PlantWeb Housing SST 1 /2–14 NPT ★ 

1K PlantWeb Housing SST M20 x 1.5 (CM 20) ★ 

2E Junction Box with Remote Display Output Aluminum 

1 

/2–14 NPT ★ 

2F Junction Box with Remote Display Output Aluminum M20 x 1.5 (CM 20) ★ 

2M Junction Box with Remote Display Output SST 1 /2–14 NPT ★


00813-0100-4016, Rev MB 




Housings for ERS Secondary - Configuration Type code S 


2A Junction Box Aluminum 1 /2–14 NPT ★ 

2B Junction Box Aluminum M20 x 1.5 (CM 20) ★ 

2J 


Junction Box SST 

1 

/2–14 NPT ★ 


1C PlantWeb Housing Aluminum G1 /2 

1L PlantWeb Housing SST G1 /2 

2G Junction Box with Remote Display Output Aluminum G 1 /2 


2C Junction Box Aluminum G1 Table 1. 3051SAM Scalable ERS Measurement Transmitter Ordering Information 



/2 

Options (Include with selected model number) 

Electronic Remote Sensor Connection Cable 


R05 50 ft. (15.2 m) Spool of Electronic Remote Sensor Cable ★ 


R15 150 ft. (45.7m) Spool of Electronic Remote Sensor Cable ★ 

Mounting Bracket 


B1 (3) Traditional flange bracket, CS, 2-in. pipe ★ 

B2 (3) 

Traditional flange bracket, CS, panel ★ 

B3 (3) 

Traditional flange flat bracket, CS, 2-in. pipe ★ 

B4 Bracket, all SST, 2-in. Pipe and Panel ★ 

B7 (3) Traditional flange bracket, B1 with SST bolts ★ 



BA (3) 

Traditional flange bracket, B1, all SST ★ 

BC (3) 

Traditional flange bracket, B3, all SST ★ 

Special Configuration (Software) 


C1 (7) Customer Software Configuration (“Configuration Data Sheet” Must Be Completed) ★ 

C3 Gage Pressure Calibration on Rosemount 3051SAM_ _A4 only ★ 

C4 (7) 

NAMUR Alarm and Saturation Levels, High Alarm ★ 

C5 (7) 

NAMUR Alarm and Saturation Levels, Low Alarm ★ 

C6 (7) Custom Alarm and Saturation Levels, High Alarm (Requires C1 and Configuration Data Sheet) ★ 

C7 (7) Custom Alarm and Saturation Levels, Low Alarm (Requires C1 and Configuration Data Sheet) ★ 

C8 (7) Low alarm (standard Rosemount alarm and saturation levels) ★ 

Special Configuration (Hardware) 


D2 (8) 1 /2-14 NPT Flange Adapters ★ 

D4 External ground screw assembly ★ 

D5 (8) Expanded 

Delete transmitter drain/vent valves (install plugs) ★ 

D7 (8) 

Coplanar flange without drain/vent ports 

D9 (8) 

RC 1 /2 Flange Adapters 

Product Certifications 


E1 ATEX Flameproof ★ 

I1 ATEX Intrinsic Safety ★ 

N1 ATEX Type n ★ 

7


8 


00813-0100-4016, Rev MB 



K1 ATEX Flameproof and Intrinsically Safe, Type n, Dust ★ 

ND ATEX Dust ★ 

E4 TIIS Flameproof ★ 

E5 FM Explosion-proof, Dust Ignition-proof ★ 

I5 FM Intrinsically Safe, Division 2 ★ 

K5 FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 ★ 

E6 (9) CSA Explosion-proof, Dust Ignition-proof, Division 2 ★ 

I6 CSA Intrinsically Safe ★ 

K6 (9) 




CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 ★ 

E7 IECEx Flameproof ★ 

I7 IECEx Intrinsic Safety ★ 

N7 IECEx Type n ★ 

K7 IECEx Flameproof, Intrinsic Safety, Type n ★ 

E2 INMETRO Flameproof ★ 

I2 INMETRO Intrinsically Safe ★ 

K2 INMETRO Flameproof, Intrinsic Safety, Type n ★ 

E3 China Flameproof ★ 

I3 China Intrinsic Safety, Dust Ignition-proof ★ 

KA (9) ATEX and CSA Flameproof, Intrinsically Safe, Division 2 ★ 

KB (9) 

FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 ★ 

KC FM and ATEX Explosion-proof, Intrinsically Safe, Division 2 ★ 

KD (9) FM, CSA, and ATEX Explosion-proof, Intrinsically Safe ★ 

Special Certifications 

Calibration Certification 


Q4 Calibration certificate ★ 

QP Calibration Certificate and Tamper Evident Seal ★ 

Material Traceability Certification 


Q8 Material Traceability Certification per EN 10204 3.1 ★ 

Quality Certification for Safety 


QS Prior-use certificate of FMEDA Data ★ 

Surface Finish Certification 


Q16 Surface Finish Certification for Hygienic Remote Seals ★ 

Toolkit Performance Reports 


QZ (10) 

Remote Seal System Performance Calculation Report ★ 

Terminal Blocks 


T1 (7) Transient Terminal Block ★ 

Sensor Fill Fluid 


L1 (11) Inert Sensor Fill Fluid ★ 

O-Ring 


L2 Graphite-Filled PTFE O-Ring ★


00813-0100-4016, Rev MB 



Bolting Material 


L4 (8) Austenitic 316 SST Bolts ★ 

L5 (2)(8) 

ASTM A 193, Grade B7M Bolts ★ 

L6 (8) 

Alloy K-500 Bolts ★ 

L7 (2)(8) ASTM A 453, Class D, Grade 660 Bolts ★ 

L8 (8) ASTM A 193, Class 2, Grade B8M Bolts ★ 

Display Type (ERS Primary Only) 


M5 (7) 

PlantWeb LCD Display ★ 

M7 (7) 

Remote Mount LCD Display and Interface, PlantWeb Housing, No Cable, SST Bracket ★ 

M8 (7) Remote Mount LCD Display and Interface, PlantWeb Housing, 50 ft. (15.2 m) Cable, SST Bracket ★ 

M9 (7) Remote Mount LCD Display and Interface, PlantWeb Housing, 100 ft. (30.5 m) Cable, SST Bracket ★ 

Special Procedures 

Pressure Testing 


P1 Hydrostatic Testing with Certificate 

Special Cleaning 


P2 (8) Cleaning for Special Services 

P3 (8) 




Cleaning for Less than 1 PPM Chlorine/Fluorine 

Typical Model Number: 3051SAM 1 S T 2A 2 E11 A 2A 

(1) The pressure range should be specified based on the maximum static pressure, not differential pressure. 

(2) Materials of Construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments. 

Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining 

environments. 

(3) Not available with Pressure Sensor / Module codes T or E. 

(4) Tantalum diaphragm material is only available with Pressure Sensor / Module code G. 

(5) “Assemble to” items are specified separately and require a completed model number. 

(6) Consult an Emerson Process Management representative for performance specifications. 

(7) Not available with Configuration Type code S. 

(8) Not available with Process Connection code A11. 

(9) Not available with M20 or G ½ conduit entry size. 

(10) The QZ report quantifies the performance of the entire ERS system. One report is provided per ERS system. The QZ option is specified on the Primary 

Transmitter (Configuration Type code P). 

(11) Silicone fill fluid is standard. 

9


10 


00813-0100-4016, Rev MB 


Rosemount 3051SAL Scalable ERS Level Transmitter 

• Integrated transmitter and remote seal in a single model number 

• Variety of process connections including flanged, threaded, and hygienic remote seals 

• Available with 10-year stability and limited 12-year warranty 

A 3051SAL Scalable ERS Level Transmitter consists of 3 parts. First, specify the transmitter model codes found on 

page 10. Then, specify a remote seal found on page 22. Finish the model number by specifying all desired options 

on page 12. 

ERS Transmitter Model Codes_______page 10 Direct Mount Seal Model Codes_______page 22 ERS Options___________page 12 

Table 2. 3051SAL Scalable ERS Level Transmitter Ordering Information 

★ The Standard offering represents the most common models and options. These options should be selected for best delivery. 



3051SAL Scalable Level Transmitter 



1 Ultra: 0.065% span accuracy, 100:1 rangedown, 12-year limited warranty ★ 

2 Classic: 0.065% span accuracy, 100:1 rangedown ★ 



P Electronic Remote Sensor - Primary ★ 

S Electronic Remote Sensor - Secondary ★ 





E In-Line Absolute ★ 



Pressure Range (5) 

Coplanar Gage In-Line Gage In-Line Absolute Coplanar 

Absolute 


1A N/A -14.7 to 30 psig 

(-1,0 to 2,06 bar) 

2A -250 to 250 inH2O 

(-623 to 623 mbar) 

3A -393 to 1000 inH2O 

(-0,98 to 2,49 bar) 

4A -14.2 to 300 psig 

(-0,98 to 20,7 bar) 

5A -14.2 to 2000 psig 

(-0,98 to 137,9 bar) 

-14.7 to 150 psig 

(-1,0 to 10,34 bar) 

-14.7 to 800 psig 

(-1,0 to 55,2 bar) 

-14.7 to 4000 psig 

(-1,0 to 275,8 bar) 

-14.7 to 10000 psig 

(-1,0 to 689,5 bar) 

0 to 30 psia 

(0 to 2,06 bar) 

0 to 150 psia 

(0 to 10,34 bar) 

0 to 800 psia 

(0 to 55,2 bar) 


(0 to 275,8 bar) 

0 to 10000 psia 

(0 to 689 bar) 

0 to 30 psia 

★ 

(0 to 2,06 bar) 

0 to 150 psia ★ 

(0 to 10,34 bar) 

0 to 800 psia ★ 

(0 to 55,2 bar) 

0 to 4000 psia ★ 

(0 to 275,8 bar) 

N/A ★


00813-0100-4016, Rev MB 








A 4-20 mA with Digital Signal Based on HART Protocol ★ 

Housing Style Material Conduit Entry Size 




1A PlantWeb Housing Aluminum 

1 

/2–14 NPT ★ 

1B PlantWeb Housing Aluminum M20 x 1.5 (CM 20) ★ 

1J PlantWeb Housing SST 

1 

/2–14 NPT ★ 

1K PlantWeb Housing SST M20 x 1.5 (CM 20) ★ 

2E Junction Box with Remote Display 

Output 

Aluminum 

1 

/2–14 NPT ★ 

2F Junction Box with Remote Display 

Output 

Aluminum M20 x 1.5 (CM 20) ★ 

2M Junction Box with Remote Display 

Output 

SST 1 /2–14 NPT ★ 


2A Junction Box Aluminum 

1 

/2–14 NPT ★ 

2B Junction Box Aluminum M20 x 1.5 (CM 20) ★ 

2J 


Junction Box SST 

1 

/2–14 NPT ★ 


1C PlantWeb Housing Aluminum G1 /2 

1L PlantWeb Housing SST G 1 /2 

2G Junction Box with Remote Display 

Output 

Aluminum G1 /2 


2C Junction Box Aluminum G1 /2 

Seal System Type 


1 Direct-Mount Seal System ★ 

Direct-Mount Extension (Between Transmitter Flange and Seal) 


0 No Extension ★ 

2 2-in. (50 mm) Extension ★ 


5 Thermal Optimizer ★ 

Transmitter Reference Pressure Connection 


00 None (In-Line Style Sensor) ★ 

20 316L SST Isolator / SST Transmitter Flange ★ 

30 Alloy C-276 Isolator / SST Transmitter Flange ★ 

11


Seal Fill Fluid Specific 

Gravity 

at 77 °F 

(25 °C) 

No Extension 2-in. (50 mm) 

Extension 

Temperature Limits (1) 

4-in. (100 mm) 

Extension 

Continue specifying a completed model number by choosing a remote seal type below: 


00813-0100-4016, Rev MB 





Thermal 

Optimizer 


A Syltherm XLT 0.85 -102 to 293 °F -102 to 293 °F -102 to 293 °F -102 to 293 °F ★ 

(-75 to 145 °C) (-75 to 145 °C) (-75 to 145 °C) (-75 to 145 °C) 

C Silicone 704 1.07 32 to 401 °F (2) 

32 to 464 °F 

(0 to 205 °C) 

(2) 

32 to 500 °F 

(0 to 240 °C) 

(2) 

32 to 599 °F 

★ 

(0 to 260 °C) (0 to 315 °C) 

D Silicone 200 0.93 -49 to 401 °F -49 to 401 °F -49 to 401 °F -49 to 401 °F ★ 

(-45 to 205 °C) (-45 to 205 °C) (-45 to 205 °C) (-45 to 205 °C) 

H Inert (Halocarbon) 1.85 -49 to 320 °F -49 to 320 °F -49 to 320 °F -49 to 320 °F ★ 

(-45 to 160 °C) (-45 to 160 °C) (-45 to 160 °C) (-45 to 160 °C) 

G (3)(4) Glycerin and Water 1.13 5 to 203 °F 5 to 203 °F 5 to 203 °F 5 to 203 °F 

★ 

(-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) 

N (3) Neobee M-20 0.92 5 to 401 °F (2) 5 to 437 °F 5 to 437 °F 5 to 437 °F 

★ 

(-15 to 205 °C) (-15 to 225 °C) (-15 to 225 °C) (-15 to 225 °C) 

P (3)(4) 

Propylene Glycol and Water 1.02 5 to 203 °F 5 to 203 °F 5 to 203 °F 5 to 203 °F 

★ 

(-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) 

page 22 FF Flush Flanged Seal Process Connections: 

2 in. / DN 50 / 50A 

3 in. / DN 80 / 80A 

4 in. / DN 100 / 100A 

page 24 EF Extended Flanged Seal Process Connections: 

3 in. / DN 80 / 80A 

4 in. / DN 100 / 100A 

page 25 RF Remote Flanged Seal Process Connections: 

1 in. / DN 25 / 25A 

1.5 in. / DN 40 / 40A 

page 27 RT Remote Threaded Seal Process Connections: 

¼ - 18 NPT 

½ - 14 NPT 

¾ - 14 NPT 

1 – 11.5 NPT 

page 29 SC Hygienic Tri-Clamp Seal Process Connections: 

1.5 in. 

2 in. 

3 in. 

page 30 SS Hygienic Tank Spud Seal Process Connections: 

4 in. 

(1)(2) (3) (4) 


Electronic Remote Sensor Connection Cable 


12 

(5) Standard 



R15 150ft. (45.7m) Spool of Electronic Remote Sensor Cable ★


00813-0100-4016, Rev MB 



Software Configuration 


C1 (6) Custom Software Configuration (Requires Configuration Data Sheet) ★ 

Gage Pressure Calibration 


C3 

Alarm Limit 

Gage Pressure Calibration on Rosemount 3051SAL_ _A4 only ★ 


C4 (6) NAMUR Alarm and Saturation Levels, High Alarm ★ 

C5 (6) NAMUR Alarm and Saturation Levels, Low Alarm ★ 

C6 (6) Custom Alarm and Saturation Levels, High Alarm (Requires C1 and Configuration Data Sheet) ★ 

C7 (6) 

Custom Alarm and Saturation Levels, Low Alarm (Requires C1 and Configuration Data Sheet) ★ 

C8 (6) 

Low Alarm (Standard Rosemount Alarm and Saturation Levels) ★ 

Ground Screw 


D4 External Ground Screw Assembly ★ 

Conduit Plug 


DO 316 SST Conduit Plug ★ 






K1 ATEX Flameproof and Intrinsically Safe, Type n, Dust ★ 








K6 (7) CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 ★ 

E7 IECEx Flameproof ★ 



K7 IECEx Flameproof, Intrinsic Safety, Type n ★ 


I2 INMETRO Intrinsically Safe ★ 


KA (7) 

ATEX and CSA Flameproof, Intrinsically Safe, Division 2 ★ 

KB (7) 

FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 ★ 





L1 (8) 

Inert Sensor Fill Fluid ★ 

O-Ring 


L2 Graphite-filled PTFE o-ring ★ 

13


14 


00813-0100-4016, Rev MB 




L4 Austenitic 316 SST Bolts ★ 

L5 (9) ASTM A 193, Grade B7M Bolts ★ 

L6 Alloy K-500 Bolts ★ 

L7 (9) 

ASTM A 453, Class D, Grade 660 Bolts ★ 

L8 ASTM A 193, Class 2, Grade B8M Bolts ★ 

Display Type (ERS Primary Only) 


M5 (6) PlantWeb LCD Display ★ 

M7 (6) Remote Mount LCD Display and Interface, PlantWeb Housing, No Cable, SST Bracket ★ 

M8 (6) 

Remote Mount LCD Display and Interface, PlantWeb Housing, 50 ft. (15.2 m) Cable, SST Bracket ★ 

M9 (6) 

Remote Mount LCD Display and Interface, PlantWeb Housing, 100 ft. (30.5 m) Cable, SST Bracket ★ 

Special Procedures 



P1 Hydrostatic Testing with Certificate 



P2 Cleaning for Special Services 

P3 Cleaning for Less than 1 PPM Chlorine/Fluorine 

Special Certifications 



Q4 Calibration Certificate ★ 

QP Calibration certificate with tamper evident seal ★ 



Q8 Material traceability certification per EN 10204 3.1 ★ 



QS Prior-use certificate of FMEDA Data ★ 



QZ (10) 

Remote Seal System Performance Calculation Report ★ 

Transient Protection 



Typical Model Number: 3051SAL 1 P G 4A A 1A 1 0 20 D FF 7 1 DA 0 0 M5 

(1) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70°F (21°C). Temperature limits are reduced in vacuum service and may be limited 

by seal selection. 

(2) Maximum process temperature is limited by heat transfer to the transmitter electronics and must be further derated if ambient, temperature exceeds 70 °F 

(21 °C). 

(3) This is a food grade fill fluid. 

(4) Not suitable for vacuum applications. 

(5) The pressure range should be specified based on the maximum static pressure, not differential pressure. 

(6) Not available with Configuration Type code S. 


(8) Silicone fill fluid is standard. 

(9) Materials of construction comply with metallurgical requirements highlighted within NACE MR 0175 / ISO 15156 for sour oil field production environments. 


environments. 

(10) The QZ report quantifies the performance of the entire ERS system. One report is provided per ERS system. The QZ option is specified on the Primary 

Transmitter (Configuration Type code P).


00813-0100-4016, Rev MB 



Rosemount 3051S Scalable Level Transmitter 

3051SAL In-Line with 

“FF” Flanged Seal 

3051SAL Coplanar 

with “SS” Hygienic 

Tank Spud Seal 

Tuned-System 

Assembly Comprised 

of 3051SAL with 

1199 Flanged Seal 

Rosemount 3051S Scalable Level Transmitters combine the features and 

benefits of a high-performance 3051S pressure transmitter with the durability 

and reliability of a direct mount seal all in a single model number. 

Level transmitters can also be ordered with an additional 1199 Remote Mount 

Seal to form a Tuned-System Assembly that offers improved performance and 

reduced costs compared to traditional symmetrical (balanced) assemblies. 

Product features and capabilities include: 

• Variety of process connections including flanged, threaded, and hygienic 

seals 

• Quantified performance for the entire transmitter / seal assembly (QZ option) 

• HART, FOUNDATION fieldbus, and Wireless protocols 




Rosemount 3051SAL Scalable Level Transmitter 

A 3051SAL Scalable Level Transmitter consists of 3 parts. First, specify the transmitter model codes found on 

page 15. Then, specify a remote seal found on page 22. Finish the model number by specifying all desired options on 

page 18. 

Transmitter Model Codes_.................._ page 15 Direct Mount Seal Model Codes_........._page 22 Transmitter Options......... page 18 

Table 3. Rosemount 3051SAL Scalable Level Transmitter Ordering Information 




3051SAL Scalable Level Transmitter 



1 Ultra: 0.065% span accuracy, 100:1 rangedown, 12-year limited warranty ★ 

2 Classic: 0.065% span accuracy, 100:1 rangedown ★ 



C Liquid Level Transmitter ★ 



D Coplanar Differential ★ 



E In-Line Absolute ★ 

15


16 


00813-0100-4016, Rev MB 







Pressure Range 

Coplanar DP Coplanar Gage In-Line Gage In-Line Absolute Coplanar Absolute 


1A N/A N/A -14.7 to 30 psig 0 to 30 psia 0 to 30 psia 

★ 

(-1,0 to 2,06 bar) (0 to 2,06 bar) (0 to 2,06 bar) 

2A -250 to 250 inH2O -250 to 250 inH2O -14.7 to 150 psig 0 to 150 psia 0 to 150 psia 

★ 

(-623 to 623 mbar) (-623 to 623 mbar) (-1,0 to 10,3 bar) (0 to 10,34 bar) (0 to 10,34 bar) 

3A -1000 to 1000 inH2O -393 to 1000 inH2O -14.7 to 800 psig 0 to 800 psia 0 to 800 psia 

★ 

(-2,5 to 2,5 bar) (-0,98 to 2,5 bar) (-1,0 to 55,2 bar) (0 to 55,2 bar) (0 to 55,2 bar) 

4A -300 to 300 psi 

-14.2 to 300 psig -14.7 to 4000 psig 0 to 4000 psia 0 to 4000 psia 

★ 

(-20,7 to 20,7 bar) (-0,98 to 20,7 bar) (-1,0 to 275,8 bar) (0 to 275,8 bar) (0 to 275,8 bar) 

5A -2000 to 2000 psi -14.2 to 2000 psig -14.7 to 10000 psig 0 to 10000 psia N/A ★ 

(-137,9 to 137,9 bar) (-0,98 to 137,9 bar) (-1,0 to 689 bar) (0 to 689 bar) 

Transmitter Output (2) 


A 4-20 mA with digital signal based on HART protocol ★ 

F (11) FOUNDATION fieldbus protocol ★ 

X (12) 

Wireless (Requires wireless options and wireless PlantWeb housing) ★ 

Housing Style Material (18) 

Conduit Entry 


1A PlantWeb housing Aluminum 

1 

/2–14 NPT ★ 

1B PlantWeb housing Aluminum M20 x 1.5 ★ 

1J PlantWeb housing SST 1 /2–14 NPT ★ 

1K PlantWeb housing SST M20 x 1.5 ★ 

2A Junction Box housing Aluminum 1 /2–14 NPT ★ 

2B Junction Box housing Aluminum M20 x 1.5 ★ 

2E Junction Box with output for remote interface Aluminum 

1 

/2–14 NPT ★ 

2F Junction Box with output for remote interface Aluminum M20 x 1.5 ★ 

2J Junction Box housing SST 

1 

/2–14 NPT ★ 

5A (6) Wireless PlantWeb housing Aluminum 1 /2–14 NPT ★ 

5J (6) Wireless PlantWeb housing SST 1 /2–14 NPT ★ 

7J (13) 


Quick Connect (A size Mini, 4-pin male 

termination) 

SST ★ 

1C PlantWeb housing Aluminum G1 /2 

1L PlantWeb housing 316L SST G1 /2 

2C Junction Box housing Aluminum G 1 /2 

2G Junction Box with output for remote interface Aluminum G1 /2 

Direct-Mount Extension (Between Transmitter Flange and Seal) 


10 No Extension ★ 



15 (5) Thermal Optimizer ★


00813-0100-4016, Rev MB 


Transmitter Reference Pressure Connection 






00 None (Inline Module Type Only) ★ 

10 


(14) Tuned-System Assembly, One Capillary Remote Seal (Requires separate 1199 model number) ★ 

20 316 L SST Isolator with SST Transmitter Flange ★ 

30 Alloy C-276 Isolator with SST Transmitter Flange 

Temperature Limits 

★ 

Seal Fill Fluid 

Specific Gravity at 

77 °F (25 °C) 

(1) 

No Extension 

2-in. (50 mm) 

Extension 

4-in. (100 mm) 

Extension 

Thermal 

Optimizer 


A Syltherm XLT 0.85 -102 to 293 °F -102 to 293 °F 102 to 293 °F 102 to 293 °F ★ 

(-75 to 145 °C) (-75 to 145 °C) (-75 to 145 °C) (-75 to 145 °C) 

C Silicone 704 1.07 32 to 401 °F 

(0 to 205 °C) (2) 

32 to 464 °F 

(0 to 240 °C) (2) 

32 to 500 °F 

(0 to 260 °C) (2) 

32 to 599 °F ★ 

(0 to 315 °C) 

D Silicone 200 0.93 -49 to 401 °F -49 to 401 °F -49 to 401 °F -49 to 401 °F ★ 

(-45 to 205 °C) (-45 to 205 °C) (-45 to 205 °C) (-45 to 205 °C) 

H Inert (Halocarbon) 1.85 -49 to 320 °F -49 to 320 °F -49 to 320 °F -49 to 320 °F ★ 

(-45 to 160 °C) (-45 to 160 °C) (-45 to 160 °C) (-45 to 160 °C) 

G (3)(4) Glycerine and Water 1.13 5 to 203 °F 5 to 203 °F 5 to 203 °F 5 to 203 °F ★ 

(-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) 

N (3) 

Neobee M-20 0.92 5 to 401 °F 

(-15 to 205 °C) (2) 

5 to 437 °F 5 to 437 °F 5 to 437 °F ★ 

(-15 to 225 °C) (-15 to 225 °C) (-15 to 225 °C) 

P (3)(4) Propylene Glycol and 1.02 5 to 203 °F 5 to 203 °F 5 to 203 °F 5 to 203 °F ★ 

Water 

(-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) 

page 22 FF Flush Flanged Seal Process Connections: 

2 in. / DN 50 / 50A 

3 in. / DN 80 / 80A 

4 in. / DN 100 / 100A 

page 24 EF Extended Flanged Seal Process Connections: 

3 in. / DN 80 / 80A 

4 in. / DN 100 / 100A 

page 25 RF Remote Flanged Seal Process Connections: 

1 in. / DN 25 / 25A 

1.5 in. / DN 40 / 40A 

page 27 RT Remote Threaded Seal Process Connections: 

¼ - 18 NPT 

½ - 14 NPT 

¾ - 14 NPT 

1 – 11.5 NPT 

page 29 SC Hygienic Tri-Clamp Seal Process Connections: 

1.5 in. 

2 in. 

3 in. 

page 30 SS Hygienic Tank Spud Seal Process Connections: 

4 in. 

17


18 


00813-0100-4016, Rev MB 


Wireless Options (1)(2) (3) (4)(5) 

(Requires option code X and wireless PlantWeb housing) 

Update Rate 

Standard (6) 


WA User Configurable Update Rate ★ 

Operating Frequency and Protocol 



3 2.4 GHz DSSS, IEC 62591 (WirelessHART) ★ 

Omnidirectional Wireless Antenna 



WK External Antenna ★ 

WM 


Extended Range, External Antenna ★ 

WN 

SmartPower 

High-Gain, Remote Antenna 

 



1 (10) Adapter for Black Power Module (I.S. Power Module Sold Separately) ★ 

Other Options (Include with selected model number) 

PlantWeb Control Functionality 


A01 (11)(12) FOUNDATION fieldbus Advanced Control Function Block Suite ★ 

Hardware Adjustments 


D01 (11)(12) FOUNDATION fieldbus Diagnostics Suite ★ 

DA2 (13) 

Advanced HART Diagnostics Suite ★ 


Standard (14) Standard 

C1 (15) 

Custom software configuration (Requires Configuration Data Sheet) ★ 

Gage Pressure Calibration 


C3 

Alarm Limit 

Gage pressure calibration on Rosemount 3051SAL_ _A4 only ★ 


C4 (11)(15) 

NAMUR alarm and saturation levels, high alarm ★ 

C5 (11)(15) NAMUR alarm and saturation levels, low alarm ★ 

C6 (11)(15) Custom alarm and saturation signal levels, high alarm (Requires C1 and Configuration Data Sheet) ★ 

C7 (11)(15) 

Custom alarm and saturation signal levels, low alarm (Requires C1 and Configuration Data Sheet) ★ 

C8 (11)(15) Low alarm (standard Rosemount alarm and saturation levels) ★ 



D1 (11)(15)(16) Hardware adjustments (zero, span, alarm, security) ★ 

Flange Adapter 


D2 


1 /2-14 NPT flange adapter ★ 

D9 RC 1 Ground Screw 

/2 SST flange adapter ★ 


D4 External ground screw assembly ★ 

Drain/Vent Valve 


D5 

Conduit Plug 

Delete transmitter drain/vent valves (install plugs) ★ 


DO (17) 

316 SST Conduit Plug ★


00813-0100-4016, Rev MB 



Product Certifications (18) 




IA ATEX FISCO Intrinsic Safety (FOUNDATION fieldbus protocol only) ★ 


K1 ATEX Flameproof, Intrinsic Safety, Type n, Dust ★ 





IE FM FISCO Intrinsically Safe (FOUNDATION fieldbus protocol only) ★ 




IF CSA FISCO Intrinsically Safe (FOUNDATION fieldbus protocol only) ★ 

K6 (19) CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 ★ 

D3 (20) 

Measurement Canada Accuracy Approval ★ 

E7 IECEx Flameproof, Dust Ignition-proof ★ 


IG IECEx FISCO Intrinsic Safety (FOUNDATION fieldbus protocol only) ★ 


K7 IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n ★ 


I2 INMETRO Intrinsic Safety ★ 

K2 INMETRO Flameproof, Intrinsic Safety ★ 




KB (19) FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 ★ 





L1 (21) Inert sensor fill fluid ★ 

O-Ring 


L2 Graphite-filled PTFE o-ring ★ 



L4 Austenitic 316 SST bolts ★ 

L5 (22) ASTM A193, Grade B7M bolts ★ 

L6 Alloy K-500 bolts ★ 

L7 (22) ASTM A453, Class D, Grade 660 bolts ★ 

L8 ASTM A193, Class 2, Grade B8M bolts ★ 

Display Type (23) 


M5 PlantWeb LCD Display ★ 

M7 (11) 

Remote mount LCD display and interface, PlantWeb housing, no cable, SST bracket ★ 

M8 (11) Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15 m) cable, SST bracket ★ 

M9 (11) Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31 m) cable, SST bracket ★ 



P1 Hydrostatic testing with certificate 

19


20 


00813-0100-4016, Rev MB 




P2 Cleaning for special services 

P3 Cleaning for less than 1PPM Chlorine/Fluorine 



Q4 Calibration certificate ★ 

QP Calibration certificate and tamper evident seal ★ 



Q8 Material traceability certification per EN 10204 3.1 ★ 



QS (11)(15) Prior-use certificate of FMEDA Data ★ 

QT (24) 

Safety-certified to IEC 61508 with certificate of FMEDA data ★ 



QZ Remote Seal System Performance Calculation Report ★ 



T1 (25)(26) Transient terminal block ★ 

Conduit Electrical Connector 


GE (27) M12, 4-pin, Male Connector (eurofast ® ) ★ 

GM (27) 

A size Mini, 4-pin, Male Connector (minifast ® ) ★ 

Typical Model Number: 3051SAL 1 C G 2A A 1A 10 20 D FF G 1 DA 0 0 



(2) Maximum process temperature is limited by heat transfer to the transmitter and must be further derated if ambient, temperature exceeds 70 °F (21 °C). 

See “Fill Fluid Specifications” on page 94 for more information. 



(5) Only available with in-line style gage and absolute transmitters (Option codes T and E). 

(6) Only available with output code X. 

(7) Long-Life Power Module must be shipped separately, order Part #00753-9220-0001. 

(8) Only available with output code X. 

(9) Not available with output code A. 

(10) Requires PlantWeb housing and Output code A. Includes Hardware Adjustments as standard. 

(11) Requires PlantWeb housing. 

(12) Available approvals are FM Intrinsically Safe, Division 2 (option code I5), CSA Intrinsically Safe (option code I6), ATEX Intrinsic Safety (option code I1), 

and IECEx Intrinsic Safety (option code I7). 

(13) Available with output code A only. Available approvals are FM Intrinsically Safe, Division 2 (option code I5), ATEX Intrinsic Safety (option code I1), or IECEx 

Intrinsic Safety (option code I7). Contact an Emerson Process Management representative for additional information. 

(14) With option code 10, user must select Seal Location option code M in Table 7 of Rosemount DP Level PDS. 

(15) Not available with output code F. 

(16) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of carbon steel conduit plug. 

(17) Not available with housing style codes 2E, 2F, 2G, 2M, 5A, 5J, or 7J. 

(18) Valid when SuperModule Platform and housing have equivalent approvals. 


(20) Requires PlantWeb housing and Hardware Adjustments option code D1. Limited availability depending on transmitter type and range. Contact an Emerson 

Process Management representative for additional information. 

(21) Silicone fill fluid is standard.


00813-0100-4016, Rev MB 



(22) Materials of construction comply with metallurgical requirements highlighted within NACE MR0175 / ISO 15156 for sour oil field production environments. 


environments. 

(23) Not available with Housing code 01 or 7J. 

(24) Not available with output code F or X. Not available with housing code 01 or 7J. 

(25) Not available with Housing code 00, 01, 5A, or 7J. 

(26) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IE, IF, and IG. 

(27) Not available with Housing code 00, 01, 5A, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Division 2 (option code I5) or 

FM FISCO Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009 to maintain outdoor rating (NEMA 4X and IP66). 

21


22 

Direct Mount Seals for 3051SAL 


00813-0100-4016, Rev MB 


Flush Flanged (FF) Seal 

• Most common seal 

• Good for use in general applications 

• Easy installation on flanged connections ranging from 2-in. (DN 50) to 4-in. (DN 100) 

Table 4. Flush Flanged (FF) Seal Ordering Information 



Model Process Connection 

FF Flush Flanged Seal 

Process Connection Size 


G 2-in. / DN 50 / 50A ★ 

7 3-in. / 80A ★ 

J DN 80 ★ 

9 4-in. / DN 100 / 100A ★ 

Flange / Pressure Rating 


1 ANSI/ASME B16.5 Class 150 ★ 



G 


PN 40 per EN 1092-1 ★ 

A 10K per JIS B2238 

B 20K per JIS B2238 

D 40K per JIS B2238 

E PN 10/16 per EN 1092-1, Available with DN 100 only 

Materials of Construction 

Isolating Diaphragm Upper Housing Flange 


CA 316L SST 316L SST CS ★ 

DA 316L SST 316L SST 316 SST ★ 

CB (1) Alloy C-276 316L SST CS ★ 

DB (1) 

Alloy C-276 316L SST 316 SST ★ 

CC Tantalum 316L SST CS ★ 

DC Tantalum 316L SST 316 SST ★ 

Flushing Connection Ring (Lower Housing) (2) 


0 None ★ 

A 316 SST ★ 

B Alloy C-276 ★ 

Flushing Connection Quantity & Size 


0 None ★ 

1 One 1 /4-18 NPT Flushing Connection ★ 

3 Two 1 /4-18 NPT Flushing Connections ★ 

7 One 1 /2-14 NPT Flushing Connection ★ 

9 Two 1 /2-14 NPT Flushing Connections ★ 


Cold Temperature Remote Seal Applications 


SB Extra Fill Fluid for Cold Temperature Applications


00813-0100-4016, Rev MB 



Remote Seal Diaphragm Thickness 


SC (3) 0.006-in. (150 μm) Diaphragm Thickness 

Flushing Connection Ring Plugs 


SD Alloy C-276 Plug(s) for Flushing Connection(s) ★ 

SG SST Plug(s) for Flushing Connection(s) ★ 

SH SST Drain / Vent(s) for Flushing Connection(s) ★ 

Flushing Connection Ring Gaskets 


SJ PTFE Gasket 

SK Barium Sulfate-Filled PTFE Gasket 

SN Grafoil Gasket 

Additional Options 

Remote Seal Code Conformance 


ST (4) Wetted Material Compliance per NACE MR 0175 / ISO 15156, MR 0103 

Remote Seal Diaphragm Coating 


SU (3) 0.001-in. ±0.0002-in. (25 μm ±5 μm) Gold Plated Diaphragm 

SV (5) Table 4. Flush Flanged (FF) Seal Ordering Information 



PTFE Coated Diaphragm for Non-Stick Purposes 

Complete the 3051SAL model number by specifying options as needed: 

page 12 ERS Transmitter Options 

page 18 Scalable Level Transmitter Options 

(1) Not available with option code SC. 

(2) Supplied with Thermo Tork TN9000 gasket. 

(3) Not available with Tantalum diaphragms (Material of Construction codes CC and DC). 



environments. 

(5) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1) 

23


Extended Flanged (EF) Seal 

• Good for use in viscous applications with plugging issues 

• Seal diaphragm installed flush with inner tank wall to prevent process plugging 

• Easy installation on 3-in. (DN 80) and 4-in. (DN 100) flanged connections 

(2) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1) 

24 


00813-0100-4016, Rev MB 


Table 5. Extended Flanged (EF) Seal Ordering Information 




EF Extended Flanged Seal 



7 3-in. / DN 80 / 80A ★ 

9 4-in. / DN 100 / 100A ★ 






G PN 40 per EN 1092-1 ★ 





E PN 10/16 per EN 1092-1, Available with DN 100 only 


Isolating Diaphragm Extension / Gasket Surface Mounting Flange 




CB Alloy C-276 Alloy C-276 CS ★ 

DB Alloy C-276 Alloy C-276 316 SST ★ 

Seal Extension Length 


20 2-in. (50 mm) ★ 

40 4-in. (100 mm) ★ 

60 6-in. (150 mm) ★ 


Cold Temperature Remote Seal Applications 


SB Extra Fill Fluid for Cold Temperature Applications ★ 



SC 0.006-in. (150 μm) Diaphragm Thickness 



ST (1) 

Wetted Material Compliance per NACE MR 0175 / ISO 15156, MR 0103 ★ 



SU 0.001-in. ±0.0002-in. (25 μm ±5 μm) Gold Plated Diaphragm 

SV (2) PTFE Coated Diaphragm for Non-Stick Purposes 






environments.


00813-0100-4016, Rev MB 



Remote Flanged (RF) Seal 

• Designed to improve performance on smaller process connections 

• Easy installation on flanged connections ranging from 1-in. to 1.5-in. (DN 50 – DN 40) 

• Lower housing / flushing ring required 

Table 6. Remote Flanged (RF) Seal Ordering Information 




RF Remote Flanged Seal 



2 1-in. / 25A ★ 

4 1.5-in. / 40A ★ 

D DN 25 ★ 

F DN 40 ★ 






G PN 40 per EN 1092-1 ★ 






Isolating Diaphragm Upper Housing Flange 




CB Alloy C-276 316L SST CS ★ 

DB Alloy C-276 316L SST 316 SST ★ 



Flushing Connection Ring Material (Lower Housing) (1) 


A 316L SST ★ 


D Plated CS ★ 

Number of Flushing Connections 


1 One ¼-18 NPT Flushing Connection ★ 

3 Two ¼-18 NPT Flushing Connections ★ 

5 None ★ 








Remote Seal Flushing Connection Plug, Drain/Vent 



SG 316 SST Plug(s) for Flushing Connection(s) ★ 

SH 316 SST Drain / Vent(s) for Flushing Connection(s) ★ 

25


26 


00813-0100-4016, Rev MB 


Remote Seal Gasket Material 


SJ 


PTFE Gasket (for use with Flushing Connection Ring) ★ 

SK Barium Sulfate-Filled PTFE Gasket (for use with Flushing Connection Ring) 

SN Grafoil Gasket (for use with Flushing Connection Ring) 



ST (3) 




SU (2) 

0.001-in. ±0.0002-in. (25 μm ±5 μm) Gold Plated Diaphragm 

SV (4) Table 6. Remote Flanged (RF) Seal Ordering Information 







(1) Supplied with C4401 Aramid fiber gasket. 




environments. 

(4) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1)


00813-0100-4016, Rev MB 


Remote Threaded (RT) Seal 

• For use with threaded process connections ( 1 /4-18 to 1-11.5 NPT) 

• Rated for use in high-pressure applications (up to 2500 PSI) 

• Optional flushing connections available 


Table 7. RT Threaded Seal Ordering Information 



Process Connection Style 


RT Remote Threaded Seal ★ 



3 1 /2-14 NPT ★ 

4 3 /4-14 NPT ★ 

5 


1-11.5 NPT ★ 

1 

1 /4-18 NPT 

Pressure Rating 


0 2500 psi ★ 

Isolating Diaphragm Material Upper Housing Material Flange 








Flushing Connection Ring Material (Lower Housing) (1) (2) 


A 316L SST ★ 

B 



D Plated CS 

Number of Flushing Connections 


1 One 1 /4-in. Flushing Connection ★ 

3 Two 1 /4-in. Flushing Connections ★ 

5 No Flushing Connection ★ 








Remote Seal Flushing Plug, Drain/Vent 



SG 316 SST Plug(s) for Flushing Connection(s) ★ 

SH 316 SST Drain / Vent(s) for Flushing Connection(s) ★ 

27


28 


00813-0100-4016, Rev MB 


Remote Seal Gasket Material 


SJ PTFE Gasket (for use with Flushing Connection Ring) ★ 

SN Grafoil Gasket (for use with Flushing Connection Ring) ★ 

SR 


Ethylene Propylene Gasket (for use with Flushing Connection Ring) ★ 

SK Barium Sulfate-Filled PTFE Gasket (for use with Flushing Connection Ring) 

Remote Seal Bolt 


S3 


304 SST Bolts ★ 

S4 316 SST Bolts 



ST (4) 




SU (3) 0.001-in. ±0.0002-in. (25 μm ±5 μm) Gold Plated Diaphragm 

SV (5) 

Table 7. RT Threaded Seal Ordering Information 







(1) Supplied with C4401 aramid fiber gasket. 

(2) Flushing Connection Ring/ Lower Housing assembly bolts provided as standard are carbon steel. 




environments. 

(5) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1).


00813-0100-4016, Rev MB 



Hygienic Tri-Clamp (SC) Seal 

• Good for use in hygienic applications 

• Easy installation on Tri-Clover style Tri-Clamp ® connections (1.5-in. to 3-in.) 

• Conforms to 3-A standard 74-03 

Table 8. SC Hygienic Tri-Clover Style Tri-Clamp Seal Ordering Information 





SC (1) 

Tri-Clover Style Tri-Clamp Seal ★ 



3 (2) 

1½ in. ★ 

5 (2) 2 in. ★ 

7 3 in. ★ 

Maximum Working Pressure 


0 1000 PSI ★ 

Isolating Diaphragm Material Upper Housing Material 


LA00 


316L SST 316L SST ★ 

LB00 Alloy C-276 316L SST 


Remote Seal Diaphragm Polishing 


R6 Electropolishing 

Remote Seal Diaphragm Surface Finish 


RD 10 �in. (0.25 �m) Ra Diaphragm Surface Finish 

RG 15 �in. (0.375 �m) Ra Diaphragm Surface Finish 

RH 20 �in. (0.5 �m) Ra Diaphragm Surface Finish 



Q16 Surface Finish Certification for Hygienic Remote Seals ★ 




(1) Clamp and gasket furnished by user. The maximum working pressure is dependent upon the clamp pressure rating. 

(2) Consult factory for calibrated spans lower than 5 psi (345 mbar). 

29


30 

Hygienic Tank Spud (SS) Seal 

• Commonly used in hygienic level applications 

• Seal diaphragm installed flush with inner tank wall 

• Conforms to 3-A standard 74-03 


00813-0100-4016, Rev MB 


Table 9. SS Hygienic Tank Spud Seal Ordering Information 





SS (1) Hygienic Tank Spud Seal ★ 



A 4-in. Sch. 5 Tri-Clamp ★ 

Maximum Working Pressure (Clamp Rating) 


0 600 PSI (41 bar) ★ 

Upper Housing 


A 316L SST ★ 

Diaphragm and Wetted, Extension Material 

Diaphragm and Wetted Extension 


AL 316L SST (2) 

316L SST (2) 


★ 

BB Alloy C-276 316L SST 

Extension Length 







SC 0.006-in. (150 �m) Diaphragm Thickness 

Tank Spud Included with Shipment 


S1 Tank Spud Included with Shipment ★ 

Remote Seal Diaphragm Polishing 


R6 Electropolishing 

Remote Seal Diaphragm Surface Finish 


RH 

RG 

20 �in. (0.5 �m) Ra Diaphragm Surface Finish 

(3) 

15 �in. (0.375 �m) Ra Diaphragm Surface Finish 

Additional Options 



Q16 Surface Finishing Certification for Hygienic Remote Seals ★ 



page 18 Scalable Level Transmitter Options


00813-0100-4016, Rev MB 


(1) Clamp and Ethylene Propylene o-ring (conforms to 3-A standard 74 and USP class VI) supplied. 

(2) Diaphragm brazed and TIG-welded to extension. 

(3) Require Option code R6 (Electropolishing). 


31


Rosemount 3051L Level Transmitter 


00813-0100-4016, Rev MB 


Rosemount 3051L level transmitters combine the features and benefits of a 

3051 pressure transmitter with the durability and reliability of a direct mount 

seal all in a single model number. 

Level transmitters can also be ordered with an additional 1199 remote seal 

to form a Tuned-System Assembly that offers improved performance and 



• Variety of process connections 

• Quantified performance for the entire transmitter / seal assembly (QZ 

option) 

• 4-20 mA HART, FOUNDATION fieldbus, Profibus-PA, and 1-5 Vdc HART 

low power protocols 





Table 10. Rosemount 3051L Level Transmitter Ordering Information 

★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery. 



3051L Level Transmitter 



2 –250 to 250 inH2O (–0,6 to 0,6 bar) ★ 

3 –1000 to 1000 inH2O (–2,5 to 2,5 bar) ★ 

4 –300 to 300 psi (–20,7 to 20,7 bar) ★ 



A 4–20 mA with Digital Signal Based on HART Protocol ★ 

F FOUNDATION fieldbus Protocol ★ 

W 

32 

(1) Expanded 

Profibus – PA Protocol ★ 

M (2) 

Low-Power 1–5 Vdc with Digital Signal Based on HART Protocol (See Option Code C2 for 0.8–3.2 Vdc Output) 

Process Connection Size, Material, Extension Length (High Side) 


Code Process Connection Size Material Extension Length ★ 

G0 (3) 2-in./DN 50 / 50A 316L SST None, Flush Mount ★ 

H0 (3) 2-in./DN 50 / 50A Alloy C-276 None, Flush Mount ★ 

J0 2-in./DN 50 / 50A Tantalum None, Flush Mount ★ 

A0 (3) 3-in./DN 80 / 80A 316L SST None, Flush Mount ★ 

A2 (3) 3-in./DN 80 / 80A 316L SST 2-in./50 mm ★ 



B0 (3) 4-in./DN 100 / 100A 316L SST None, Flush Mount ★ 

B2 (3) 4-in./DN 100 / 100A 316L SST 2-in./50 mm ★ 

B4 (3) 4-in./DN 100 / 100A 316L SST 4-in./100 mm ★ 

B6 (3) 4-in./DN 100 / 100A 316L SST 6-in./150 mm ★


00813-0100-4016, Rev MB 



C0 (3) 3-in./DN 80 / 80A Alloy C-276 None, Flush Mount ★ 

C2 (3) 3-in./DN 80 / 80A Alloy C-276 2-in./50 mm ★ 



D0 (3) 4-in./DN 100 / 100A Alloy C-276 None, Flush Mount ★ 

D2 (3) 4-in./DN 100 / 100A Alloy C-276 2-in./50 mm ★ 



E0 3-in./DN 80 / 80A Tantalum None, Flush Mount ★ 

F0 4-in./DN 100 / 100A Tantalum None, Flush Mount ★ 

Mounting Flange Size, Rating, Material (High Side) 

Size Rating Material 


M 2-in. ANSI/ASME B16.5 Class 150 CS ★ 

A 3-in. ANSI/ASME B16.5 Class 150 CS ★ 

B 4-in. ANSI/ASME B16.5 Class 150 CS ★ 

N 2-in. ANSI/ASME B16.5 Class 300 CS ★ 

C 3-in. ANSI/ASME B16.5 Class 300 CS ★ 

D 4-in. ANSI/ASME B16.5 Class 300 CS ★ 

P 2-in. ANSI/ASME B16.5 Class 600 CS ★ 

E 3-in. ANSI/ASME B16.5 Class 600 CS ★ 

X (3) 2-in. ANSI/ASME B16.5 Class 150 316 SST ★ 

F (3) 3-in. ANSI/ASME B16.5 Class 150 316 SST ★ 

G (3) 4-in. ANSI/ASME B16.5 Class 150 316 SST ★ 

Y (3) 2-in. ANSI/ASME B16.5 Class 300 316 SST ★ 

H (3) 3-in. ANSI/ASME B16.5 Class 300 316 SST ★ 

J (3) 4-in. ANSI/ASME B16.5 Class 300 316 SST ★ 

Z (3) 2-in. ANSI/ASME B16.5 Class 600 316 SST ★ 

L (3) 3-in. ANSI/ASME B16.5 Class 600 316 SST ★ 

Q DN 50 PN 40 per EN 1092-1 CS ★ 

R DN 80 PN 40 per EN 1092-1 CS ★ 

S DN 100 PN 40 per EN 1092-1 CS ★ 

V DN 100 PN 10 / 16 per EN 1092-1 CS ★ 

K (3) DN 50 PN 40 per EN 1092-1 316 SST ★ 

T (3) DN 80 PN 40 per EN 1092-1 316 SST ★ 

U (3) DN 100 PN 40 per EN 1092-1 316 SST ★ 

W (3) DN 100 PN 10 / 16 per EN 1092-1 316 SST ★ 

7 (3) Expanded 

4 in. ANSI/ASME B16.5 Class 600 316 SST ★ 

1 — 10K per JIS B2238 CS 



4 (3) — 10K per JIS B2238 316 SST 

5 (3) — 20K per JIS B2238 316 SST 

6 (3) — 40K per JIS B2238 316 SST 

Seal Fill Fluid Specific Gravity at 77 °F (25 °C) Temperature Limits (4) 


A Syltherm XLT 0.85 -102 to 293 °F (-75 to 145 °C) ★ 

C (5) Table 10. Rosemount 3051L Level Transmitter Ordering Information 



Silicone 704 1.07 32 to 401 °F (0 to 205 °C) ★ 

D Silicone 200 0.93 -49 to 401 °F (-45 to 205 °C) ★ 

H Inert (Halocarbon) 1.85 -49 to 320 °F (-45 to 160 °C) ★ 

33


34 


00813-0100-4016, Rev MB 


G (6)(7) Glycerine and Water 1.13 5 to 203 °F (-15 to 95 °C) ★ 

N (5)(6) 

Neobee M-20 0.92 5 to 401 °F (-15 to 205 °C) ★ 

P (6)(7) Table 10. Rosemount 3051L Level Transmitter Ordering Information 



Propylene Glycol and 

Water 

1.02 5 to 203 °F (-15 to 95 °C) ★ 

Low Pressure Side 

Configuration Diaphragm Material Sensor Fill Fluid 


11 (3) Gage 316L SST Silicone ★ 

21 Differential 316L SST Silicone ★ 

22 Differential Alloy C-276 Silicone ★ 

2A Differential 316L SST Inert (Halocarbon) ★ 

2B Differential Alloy C-276 Inert (Halocarbon) ★ 

31 (3) Tuned-System Assembly 

with Remote Seal 

316L SST Silicone (Requires Option Code S1) ★ 

O-ring 


A Glass-filled PTFE ★ 

Housing Material Conduit Entry Size 


A Aluminum ½–14 NPT ★ 

B Aluminum M20 × 1.5 ★ 

J SST ½–14 NPT ★ 

K SST M20 × 1.5 ★ 


D Aluminum G½ 

M SST G½ 




A01 FOUNDATION fieldbus Advanced Control Function Block Suite ★ 

PlantWeb Diagnostic Functionality 


D01 FOUNDATION fieldbus Diagnostics Suite ★ 

Seal Assemblies 


S1 (8) Assembled to One Rosemount 1199 Seal (Requires 1199M) ★ 





K5 FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, and Division 2 ★ 

I1 (9) 

ATEX Intrinsic Safety and Dust ★ 

N1 (9) 

ATEX Type n Certification and Dust ★ 

E8 ATEX Flameproof and Dust Certification ★ 

E4 (9) TIIS Flameproof ★ 



C6 CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, and Division 2 ★ 

K6 (9) 

CSA and ATEX Explosion-proof, Intrinsically Safe, and Division 2 (combination of C6 and K8) ★ 

KB FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, and Division 2 (combination of K5 and C6) ★ 

K7 IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, and Type n (combination of I7, N7, and E7) ★


00813-0100-4016, Rev MB 



K8 (9) ATEX Flame-proof and Intrinsic Safety Approvals (combination of I1 and E8) ★ 

KD (9) Table 10. Rosemount 3051L Level Transmitter Ordering Information 



FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of K5, C6, I1, and E8) ★ 


E7 IECEx Flameproof, Dust Ignition-proof ★ 

N7 IECEx Type n Certification ★ 

IA ATEX FISCO Intrinsic Safety ★ 

IE FM FISCO Intrinsically Safe ★ 


I2 INMETRO Intrinsic Safety ★ 

K2 INMETRO Flameproof, Intrinsic Safety ★ 

Shipboard Approvals 


SBS American Bureau of Shipping (ABS) Type Approval ★ 

SBV Bureau Veritas (BV) Type Approval ★ 

SDN Det Norske Veritas (DNV) Type Approval ★ 

SLL Lloyds Register (LR) Type Approval ★ 



L4 Austenitic 316 SST Bolts ★ 

L5 ASTM A 193, Grade B7M bolts ★ 

L6 Alloy K-500 Bolts ★ 

L8 ASTM A 193 Class 2, Grade B8M Bolts ★ 

Display Type 


M4 (10) 

LCD Display with Local Operator Interface ★ 

M5 LCD Display for Aluminum Housing (Housing Codes A, B, C, and D only) ★ 

M6 LCD Display for SST Housing (Housing Codes J, K, L, and M only) ★ 



Q4 Calibration Certificate ★ 

QP Calibration Certificate and tamper evident seal ★ 

QG Calibration Certificate and GOST Verification Certificate ★ 






QS (11) 

Prior-use certificate of FMEDA data ★ 

Conduit Electrical Connector 


GE M12, 4-pin, Male Connector (eurofast ® ) ★ 

GM A size Mini, 4-pin, Male Connector (minifast ® ) ★ 

Configuration Buttons 


J1 (12)(13) 

J3 (12)(13) 


Local Zero Adjustment Only ★ 

No Local Zero or Span Adjustment ★ 


T1 (14) 

Transient Protection Terminal Block ★ 

35






36 


00813-0100-4016, Rev MB 



C1 (12) Custom Software Configuration (Completed CDS 00806-0100-4001 required with order) ★ 

Low Power Output 


C2 (12) 0.8–3.2 Vdc Output with Digital Signal Based on HART Protocol (Available with Output code M only) ★ 

Alarm Limit 


C4 (12)(15) 

NAMUR alarm and saturation levels, high alarm ★ 

CN (12)(15) NAMUR alarm and saturation levels, low alarm ★ 

CR Custom alarm and saturation signal levels, high alarm ★ 

CS Custom alarm and saturation signal levels, low alarm ★ 

CT Low alarm (standard Rosemount alarm and saturation levels) ★ 

Conduit Plug 


D0 316 SST Conduit Plug ★ 

Ground Screw 


V5 (16) External Ground Screw Assembly ★ 

Lower Housing Flushing Connection Options 

Ring Material Number Size (NPT) 


F1 316 SST 1 

1 

/4-18 NPT ★ 

F2 316 SST 2 1 /4-18 NPT ★ 

F3 Alloy C-276 1 1 /4-18 NPT ★ 

F4 Alloy C-276 2 

1 

/4-18 NPT ★ 

F7 316 SST 1 1 /2-14 NPT ★ 

F8 316 SST 2 1 /2-14 NPT ★ 


1 

/2-14 NPT ★ 

F0 Alloy C-276 2 1 /2-14 NPT ★ 

Flange Adapters 


DF (17) 1/2-14 NPT flange adapter ★ 

RC1/4 RC1/2 Process Connection 


D9 (17) JIS Process Connection - RC 1/2 Flange Adapter 

Toolkit Total System Performance Reports 



Typical Model Number: 3051L 2 A A0 A D 21 A A F1 

(1) Option Code M4 - LCD Display with Local Operator Interface required for local addressing and configuration. 

(2) Not available with hazardous certification Option Codes I1, N1, E4, K6, and K8. 



environments. 



(5) Maximum process temperature is limited by heat transfer to the transmitter and must be further derated if ambient, temperature exceeds 70 °F (21 °C).


00813-0100-4016, Rev MB 




(8) “Assemble-to” items are specified separately and require a completed model number. 

(9) Not available with low-power Option Code M 

(10) Available only with output code W - Profibus PA 

(11) Only available with HART 4-20 mA output (output code A). 

(12) Not available with fieldbus (output code F) or profibus protocols (output code W). 


(13) Local zero and span adjustments are standard unless Option Code J1 or J3 is specified. 


(15) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field. 

(16) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option. 

(17) Not available with Remote Mount Seal Assembly option S1. 

37


Tuned-System Assembly Comprised of 

2051L with 1199 Remote Mount Seal 

Rosemount 2051L Level Transmitter 


00813-0100-4016, Rev MB 


Rosemount 2051L level transmitters combine the features and benefits of a 

2051 pressure transmitter with the durability and reliability of a direct mount 

seal all in a single model number. 

Level transmitters can also be ordered with an additional 1199 remote seal 

to form a Tuned-System Assembly that offers improved performance and 





option) 

• 4-20 mA HART, FOUNDATION fieldbus, and 1-5 Vdc HART Low-Power 

outputs 









2051L Level Transmitter 



2 –250 to 250 inH 2O (–0,6 to 0,6 bar) ★ 

3 –1000 to 1000 inH 2O (–2,5 to 2,5 bar) ★ 

4 –300 to 300 psi (–20,7 to 20,7 bar) ★ 



A 4–20 mA with Digital Signal Based on HART Protocol ★ 

F FOUNDATION fieldbus Protocol ★ 

W (1) Profibus - PA Protocol ★ 


M Low-Power, 1–5 Vdc with Digital Signal Based on HART Protocol 

Process Connection Size, Diaphragm Material (High Side) 

Process Connection Size Diaphragm 


G 

38 

(2) 2 in./DN 50 316L SST ★ 

H (2) 

2 in./DN 50 Alloy C-276 ★ 

J 2 in./DN 50 Tantalum ★ 

A (2) 3 in./DN 80 316L SST ★ 

B (2) 

4 in./DN 100 316L SST ★ 

C (2) 3 in./DN 80 Alloy C-276 ★ 

D (2) 4 in./DN 100 Alloy C-276 ★ 

E 3 in./DN 80 Tantalum ★ 

F 4 in./DN 100 Tantalum ★ 

Extension Length (High Side) 


0 None, Flush Mount ★ 

2 2 in./50 mm ★ 

4 4 in./100 mm ★ 

6 6 in./150 mm ★


00813-0100-4016, Rev MB 






Mounting Flange Size, Rating, Material (High Side) 

Size Rating Material 


M 2-in. ANSI/ASME B16.5 Class 150 CS ★ 

A 3-in. ANSI/ASME B16.5 Class 150 CS ★ 

B 4-in. ANSI/ASME B16.5 Class 150 CS ★ 

N 2-in. ANSI/ASME B16.5 Class 300 CS ★ 

C 3-in. ANSI/ASME B16.5 Class 300 CS ★ 

D 4-in. ANSI/ASME B16.5 Class 300 CS ★ 

X (2) 

2-in. ANSI/ASME B16.5 Class 150 316 SST ★ 

F (2) 3-in. ANSI/ASME B16.5 Class 150 316 SST ★ 

G (2) 4-in. ANSI/ASME B16.5 Class 150 316 SST ★ 

Y (2) 

2-in. ANSI/ASME B16.5 Class 300 316 SST ★ 

H (2) 3-in. ANSI/ASME B16.5 Class 300 316 SST ★ 

J (2) 4-in. ANSI/ASME B16.5 Class 300 316 SST ★ 

Q DN50 PN 40 per EN 1092-1 CS ★ 

R DN80 PN 40 per EN 1092-1 CS ★ 

K (2) DN50 PN 40 per EN 1092-1 316 SST ★ 

T (2) DN80 PN 40 per EN 1092-1 316 SST ★ 

Seal Fill Fluid Specific Gravity at 77 °F (25 °C) Temperature Limits (3) 


A Syltherm XLT 0.85 -102 to 293 °F (-75 to 145 °C) ★ 

C (4) Silicone 704 1.07 32 to 401 °F (0 to 205 °C) ★ 

D Silicone 200 0.93 -49 to 401 °F (-45 to 205 °C) ★ 

H Inert (Halocarbon) 1.85 -49 to 320 °F (-45 to 160 °C) ★ 

G (5)(6) Glycerin and Water 1.13 5 to 203 °F (-15 to 95 °C) ★ 

N (4) Neobee M-20 0.92 5 to 401 °F (-15 to 205 °C) ★ 

P (5)(6) 

Propylene Glycol and Water 1.02 5 to 203 °F (-15 to 95 °C) ★ 

Sensor Module Configuration, Flange Adapter (Low Side) 

Configuration 


1 (2) Gage ★ 

2 Differential ★ 

3 (2) 

Tuned-System Assembly with Remote Seal ★ 

Sensor Module Diaphragm Material, Sensor Fill Fluid (Low Side) 

Diaphragm Material Sensor Fill Fluid 


1 (2) 316L SST Silicone ★ 

2 (2) Alloy C-276 (SST Valve 

Seat) 

Silicone ★ 

7 (2) Alloy C-276 (SST Valve 

Seat) 

Silicone ★ 

A (2) 316L SST Inert (Halocarbon) ★ 

B (2) 

Alloy C-276 (SST Valve 

Seat) 

Inert (Halocarbon) ★ 

G (2) 

O-ring 

Alloy C-276 (SST Valve 

Seat) 

Inert (Halocarbon) ★ 


A Glass-filled PTFE ★ 

39





Housing Material, Conduit Entry Size 

40 


00813-0100-4016, Rev MB 


Housing Material Conduit Entry Size 


A Aluminum ½–14 NPT ★ 

B Aluminum M20 × 1.5 ★ 

J SST ½–14 NPT ★ 

K 


SST M20 × 1.5 ★ 

D Aluminum G½ 

M SST G½ 




A01 FOUNDATION fieldbus Advanced Control Function Block Suite ★ 

Seal Assemblies 


S1 (7) Assemble to One Rosemount 1199 Seal (Requires 1199M) ★ 



E1 (8) ATEX Flameproof ★ 

E2 (8) 

INMETRO Flameproof ★ 

E3 (8) China Flameproof ★ 



E6 CSA Explosion-proof, Dust Ignition-proof, Division 2 ★ 

E7 (8) IECEx Flameproof ★ 

EW India (CCOE) Flameproof Approval ★ 

I1 (8) ATEX Intrinsic Safety ★ 

I2 (8) INMETRO Intrinsically Safe ★ 

I3 (8) 

China Intrinsic Safety ★ 



I7 (8) 

IECEx Intrinsic Safety ★ 

IA (9) ATEX FISCO Intrinsic Safety ★ 

IE (9) FM FISCO Intrinsically Safe ★ 

IF (9) 

CSA FISCO Intrinsically Safe ★ 

IG (9) IECEx FISCO Intrinsically Safe ★ 

IW India (CCOE) Intrinsic Safety Approval ★ 

K1 (8) 

ATEX Flameproof, Intrinsic Safety, Type n, Dust ★ 



K6 CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 ★ 

K7 (8) IECEx Flameproof, Intrinsic Safety, Type n ★ 


KB FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2 ★ 

KC (8) FM and ATEX Explosion-proof, Intrinsically Safe, Division 2 ★ 


N1 (8) 

ATEX Type n ★ 

N7 (8) IECEx Type n ★ 

ND (8) ATEX Dust ★


00813-0100-4016, Rev MB 



Shipboard Approvals 


SBS American Bureau of Shipping (ABS) Type Approval ★ 

SBV Bureau Veritas (BV) Type Approval ★ 

SDN Det Norske Veritas (DNV) Type Approval ★ 

SLL Lloyds Register (LR) Type Approval ★ 

Digital Display 


M4 (10) 

LCD Display With Local Operator Interface ★ 

M5 LCD display ★ 



D4 (11) Zero and Span Hardware Adjustments ★ 

Flange Adapters 


DF (12) 1 /2-14 NPT Flange Adapters ★ 

Conduit Plug 


DO (13) 316 SST Conduit Plug ★ 

RC1/4 RC1/2 Process Connection 


D9 (11) JIS Process Connection - RC 1/2 Flange Adapter 

Ground Screw 


V5 (14) External Ground Screw Assembly ★ 






C1 (16) Custom Software Configuration (Requires completed Configuration Data Sheet) ★ 

Alarm Limit 


C4 (16)(17) NAMUR alarm and saturation levels, high alarm ★ 

CN (16)(18) NAMUR alarm and saturation levels, low alarm ★ 



Q4 Calibration Certificate1 ★ 

Alarm Limit 





QS (16) 

Prior-use certificate of FMEDA data ★ 

Toolkit Total System Performance Reports 



Lower Housing Flushing Connection Ring Material Number Size (NPT) 


F1 316 SST 1 

1 

/4-18 NPT ★ 

F2 316 SST 2 1 /4-18 NPT ★ 

F3 (18) Alloy C-276 1 1 /4-18 NPT ★ 

F4 (18) 




Alloy C-276 2 

1 

/4-18 NPT ★ 

41


42 


00813-0100-4016, Rev MB 





F7 316 SST 1 1 /2-14 NPT ★ 

F8 316 SST 2 1 /2-14 NPT ★ 


1 

/2-14 NPT ★ 

F0 Alloy C-276 2 1 /2-14 NPT ★ 

Typical Model Number: 2051L 2 A A0 X D 21 A A B4 M5 F1 

(1) Option Code M4 - LCD Display with Local Operator Interface required for local addressing and configuration. 



environments. 

(3) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70°F (21°C). Temperature limits are reduced in vacuum service and may be limited by 

seal selection. 

(4) Maximum process temperature is limited by heat transfer to the transmitter electronics and must be further derated if ambient temperatures exceed 70°F (21°C). 



(7) “Assemble-to” items are specified separately and require a completed model number. 

(8) Not available with Low Power output code M. 

(9) Only valid with FOUNDATION fieldbus output code F. 

(10) Available only with output code W-PROFIBUS PA. 

(11) Not valid with FOUNDATION fieldbus output code F. 

(12) Not available with Remote Mount Seal Assembly option S1. 

(13) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug, 

(14) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option. 


(16) Only available with HART 4-20 mA output (output code A). 

(17) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field. 

(18) Not available with Option Codes A0, B0, and G0.


00813-0100-4016, Rev MB 



Rosemount 1199 Direct Mount Seal Systems 

Tuned-System Assembly Comprised of 

1199 Direct Mount Seal combined with 

1199 Remote Mount Seal 

Rosemount 1199 Direct Mount Seals reduce installation costs by eliminating 

mounting hardware. Their advanced design also minimizes oil volume 

improving performance. 


• Direct Mount gage or absolute seal system can be used for open or 

vented to atmosphere tank applications 

• Tuned-System Assembly order codes can be used to improve 

performance for DP measurements in closed or pressurized tank 

applications 


• Quantified performance for the entire transmitter / seal assembly 

(QZ option) 




Rosemount 1199 Direct Mount Seal 

The 1199 Direct Mount Seal also requires specification of a Rosemount pressure transmitter. See the appropriate 

Product Data Sheet for the desired transmitter and include the option indicated in the table below for the 

configuration desired. 

Table 12. When ordering Rosemount 1199 Direct and Remote Mount Seals, please make sure to add the correct seal system 

ordering code to the transmitter model 

Transmitter Model 2 Seals 1 Seal 

3051S_C B12 B11 

3051C - Welded-Repairable S2 S1 

3051C - All Welded (1) 

S9 S0 

2051C S2 S1 

3051S_T — B11 

3051T, 2051T, 2088 — S1 

(1) All welded system connection types require either a 316L SST or Alloy C-276 isolating diaphragm in the pressure transmitter model codes. 

A 1199 Direct Mount Seal consists of 2 parts. First, specify the direct mount connection model codes found on page 

44. Then, specify a remote seal found on page 45. 

Ordering Codes 

1199 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

Direct Mount Connection page 44 Seal Connection page 45 

43


Table 13. Rosemount 1199 Direct Mount Seal Systems Ordering Information 



44 

Model Product Description 

1199 Seal Systems 

Connection Type Seal System Seal Location 


00813-0100-4016, Rev MB 



3051S and 2051C Coplanar Transmitters (3051S_C and 2051C) 

W Welded-Repairable One or Two Seal System High Side of Transmitter ★ 

R (1) 

All Welded One Seal System High Side of Transmitter ★ 

T (1) 

All Welded Two Seal System High Side of Transmitter ★ 

All In-Line Transmitters (3051S_T, 3051T, 2051T, 2088) 

W All Welded One Seal System — ★ 

3051C Coplanar Transmitters (3051C) 

W Determined by Transmitter 

Code 


Gravity at 77 

°F (25 °C) 

One or Two Seal System High Side of Transmitter ★ 

No Extension 2-in. (50 mm) 

Extension 


4-in. (100 mm) 

Extension 

Thermal 

Optimizer 


Standard ★ 

A Syltherm XLT 0.85 -102 to 293 °F -102 to 293 °F 102 to 293 °F 102 to 293 °F 

★ 

(-75 to 145 °C) (-75 to 145 °C) (-75 to 145 °C) (-75 to 145 °C) 

C (3) Silicone 704 1.07 32 to 401 °F 

(0 to 205 °C) (4) 

32 to 464 °F 

(0 to 240 °C) (4) 

32 to 500 °F 

(0 to 260 °C) (4) 

32 to 599 °F 

★ 

(0 to 315 °C) 

D Silicone 200 0.93 -49 to 401 °F 

(-45 to 205 °C) (4) 

-49 to 401 °F -49 to 401 °F -49 to 401 °F 

★ 

(-45 to 205 °C) (-45 to 205 °C) (-45 to 205 °C) 

H Inert 

1.85 -49 to 320 °F -49 to 320 °F -49 to 320 °F -49 to 320 °F 

★ 

(Halocarbon) 

(-45 to 160 °C) (-45 to 160 °C) (-45 to 160 °C) (-45 to 160 °C) 

G (5)(6) Glycerine 1.13 5 to 203 °F 5 to 203 °F 5 to 203 °F 5 to 203 °F 

★ 

and Water 

(-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) 

N (5) Neobee M-20 0.92 5 to 401 °F (4) 5 to 437 °F 5 to 437 °F 5 to 437 °F 

★ 

(-15 to 205 °C) (-15 to 225 °C) (-15 to 225 °C) (-15 to 225 °C) 

P (5)(6) 

Propylene 1.02 5 to 203 °F 5 to 203 °F 5 to 203 °F 5 to 203 °F 

★ 

Glycol and 

Water 

(-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) (-15 to 95 °C) 

Seal Connection Type 


A Direct Mount ★ 

Direct Mount Connection Type 

Extension Length Seal System Connection Type 


All Coplanar Transmitters (3051S_C, 3051C and 2051C) 


94 Direct Mount, No Extension Tuned-System Assembly, two seals Welded-Repairable ★ 

93 Direct Mount, No Extension One Seal System Welded-Repairable ★ 

96 Direct Mount, No Extension Tuned-System Assembly, two seals All Welded ★ 

97 Direct Mount, No Extension One Seal System All Welded ★ 

B4 Direct Mount, 2 in. (50 mm) Extension Tuned-System Assembly, two seals Welded-Repairable ★ 

B3 Direct Mount, 2 in. (50 mm) Extension One Seal System Welded-Repairable ★ 

B6 Direct Mount, 2 in. (50 mm) Extension Tuned-System Assembly, two seals All Welded ★ 

B7 Direct Mount, 2 in. (50 mm) Extension One Seal System All Welded ★ 

D4 Direct Mount, 4 in. (100 mm) Extension Tuned-System Assembly, two seals Welded-Repairable ★ 

D3 Direct Mount, 4 in. (100 mm) Extension One Seal System Welded-Repairable ★ 

D6 Direct Mount, 4 in. (100 mm) Extension Tuned-System Assembly, two seals All Welded ★ 

D7 Direct Mount, 4 in. (100 mm) Extension One Seal System All Welded ★


00813-0100-4016, Rev MB 



Table 13. Rosemount 1199 Direct Mount Seal Systems Ordering Information 




95 Direct Mount, No Extension One Seal System All Welded ★ 

D5 Thermal Optimizer One Seal System All Welded ★ 


(2) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70°F (21 °C). 

(3) Not available with Seal Connection Type \ Capillary ID, Description codes B, E, H or M. 

(4) Maximum process temperature is limited by heat transfer to the transmitter and must be further derated if ambient temperature exceeds 70 °F. 






Flanged Seal Assemblies 

● = Transmitter Availability 

— = Unavailable 

Coplanar 

Extensions 

Inline 0 in. 2-in. 4-in. Process Connections 


page 54 FFW Flush Flanged Seal ● (1) ● ● 2-in. / DN 50 / 50A 

3-in. / DN 80 / 80A 

4-in. / DN 100 / 100A 

★ 


page 57 RFW Flanged Seal ● — ● ● 1 /2-in. / DN 15 

3 /4-in. 

1-in. / DN 25 / 25A 

1 1 /2-in. / DN 40 / 40A 

page 60 EFW Extended Flanged Seal ● (1) ● ● 1 1 /2-in. / DN 40 / 40A 

2-in. / DN 50 / 50A 

3-in. / Headbox 

/ DN 80 / 80A 


/ DN 100 / 100A 

page 65 FCW Flush Flanged Seal – Ring Type Joint 

(RTJ) Gasket Surface 

● (1) ● ● 2-in. 

3-in. 

page 67 RCW Ring Type Joint (RTJ) Flanged Seal ● — ● ● ½-in. 

¾-in. 

1-in. 

1 ½-in. 

page 69 FUW and FVW Flush Flanged Type Seals ● ● ● ● DN 50 

DN 80 

★ 

★ 

45




46 

Threaded Seal Assemblies 

Coplanar 

Extensions 


00813-0100-4016, Rev MB 




page 70 RTW Threaded Seal ● — ● ● ¼ –18 NPT 

3 

/8 –18 NPT 

½ –14 NPT 

¾ –14 NPT 

1 – 11.5 NPT 

1 ¼ –11.5 NPT 

1 ½ –11.5 NPT 

G 1 /2 A DIN 16288 

R1 /2 per ISO 7/1 

★ 


page 73 HTS Male Threaded Seal ● ● ● ● G1 

G1 ½ 

G2 

1-11.5 NPT 

1 ½ -11.5 NPT 

2-11.5 NPT 

Hygienic Seal Assemblies 

Coplanar 

Extensions 



page 74 SCW Hygienic Tri-Clover Style Tri-Clamp ● ● ● ● 1 ½-in. 

★ 

Seal 

2-in. 

2 ½-in. 

3-in. 

4-in. 


page 76 SSW Hygienic Tank Spud Seal ● ● ● ● 2-in. Extension 

6-in. Extension 

page 78 STW Hygienic Thin Wall Tank Spud Seal ● — ● ● 0.8 in Extension 

page 79 EES Hygienic Flanged Tank Spud 

Extended Seal 

● ● ● ● DN 50 

DN 80 

page 80 VCS Tri-clamp ® In-Line Seal ● — — — 1-in. 

1 ½-in. 

2-in. 

3-in. 

4-in. 

★


00813-0100-4016, Rev MB 



page 81 SVS Varivent ® Compatible Hygienic 

● ● ● ● Tuchenhagen Varivent 

Connection Seal 

® 



Compatible 

Specialty Seal Assemblies 


page 82 SHP Hygienic Cherry-Burrell “I” Line Seal ● — — — 2-in. 

3-in. 

page 83 SLS Dairy Process Connection - Female 

Thread Seal per DIN 11851 

● — — — DN 40 

DN 50 

Inline 

Coplanar 

Extensions 

0 in. 2-in. 4-in. 

Process Connections 

page 84 WSP Saddle Seal ● — ● ● 2-in. 

3-in. 

4-in. or Larger 

page 85 UCP Male Threaded Pipe Mount Seals and 

PMW Paper Mill Sleeve Seals 

● — — — 1 ½-in. with Threaded 

Knurled Nut 

1-in. with Cap Screw 

Retainer 

page 86 CTW Chemical Tee Seal ● — ● ● Retro-fit 

page 87 TFS Wafer Style In-Line Seal ● — — — 1-in. / DN 25 

1 ½-in. / DN 40 

2-in. / DN 50 

3-in. / DN 80 

4-in. / DN 100 

page 88 WFW Flow-Thru Flanged Seal ● — ● ● 1-in. 

2-in. 

3-in. 

(1) Available with ANSI Class 300 or EN 1092-1 PN 40 or JIS B2238 20K or lower flange ratings. 

47


48 


00813-0100-4016, Rev MB 


Rosemount 1199 Remote Mount Seal Systems 

Tuned-System Assembly Comprised 

of 1199 Direct Mount Seal combined 

with 1199 Remote Mount Seal 

Rosemount 1199 Remote Mount Seals are used commonly at the top of the 

vessel when a DP measurement is required. The capillary that is used is 

available in three different diameters to optimize time response and reduce 

temperature effects. 


• Remote Mount Seals can be used for high temperature applications 

• Remote Mount Seals are used on the low pressure side of the transmitter 

for Tuned-System Assemblies that can be used for DP measurements in 

closed or pressurized tank applications 



option) 





Rosemount 1199 Remote Mount Seal 

The 1199 Remote Mount Seal also requires specification of a Rosemount pressure transmitter. See the appropriate 

Product Data Sheet for the desired transmitter and include the option indicated in the table below for the 

configuration desired. 

Table 14. When ordering Rosemount 1199 Direct and Remote Mount Seals, please make sure to add the correct seal system 

ordering code to the transmitter model 

Transmitter Model 2 Seals 1 Seal 

3051S_C B12 B11 

3051C - Welded-Repairable S2 S1 

3051C - All Welded (1) 

S8 or S9 S7 

2051C S2 S1 

3051S_T — B11 

3051T, 2051T, 2088 — S1 


A 1199 Remote Mount Seal consists of 2 parts. First, specify the capillary model codes found on page 49. Then, 

specify a remote seal found on page 51. 

Ordering Codes 

1199 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 

Remote Mount Connection page 49 Seal Connection page 51


00813-0100-4016, Rev MB 


Capillary/Fill Fluid 


NOTE: 

Use Table 15 for Capillary Type Connections. Use Table 13 for Direct Mount Type Connections. 

Table 15. Rosemount 1199 Remote Mount Seal Systems Ordering Information 



Model Product Description 

1199 Seal System 

Connection Type Seal System Seal Location 


3051S and 2051 Coplanar Transmitters (3051S_C and 2051C) 

W Welded-Repairable One or Two Seal System High Side of Transmitter ★ 

M Welded-Repairable One or Two Seal System Low Side of Transmitter ★ 

D Welded-Repairable Two Seal System Balanced System - Same Seal on Low and High Side ★ 

R (1) 

All Welded One Seal System High Side of Transmitter ★ 

T (1) 

All Welded Two Seal System High Side of Transmitter ★ 

S (1) All Welded Two Seal System Low Side of Transmitter ★ 


W All Welded One Seal System — ★ 

3051 Coplanar Transmitters (3051C) 

W Determined by Transmitter Code One or Two Seal System High Side of Transmitter ★ 

M Determined by Transmitter Code One or Two Seal System Low Side of Transmitter ★ 

D Determined by Transmitter Code Two Seal System Balanced System - Same Seal on Low and High Side ★ 

Seal Fill Fluid Specific Gravity at 

77 °F (25 °C) 



A (3) 

Syltherm XLT 0.85 –102 to 293 °F (–75 to 145 °C) ★ 

C (4) 

Silicone 704 1.07 32 to 599 °F (0 to 315 °C) ★ 

D Silicone 200 0.93 –49 to 401 °F (–45 to 205 °C) ★ 

H Inert (Halocarbon) 1.85 –49 to 320 °F (–45 to 160 °C) ★ 

G (5)(6) Glycerin and Water 1.13 5 to 203 °F (–15 to 95 °C) ★ 

N (5) 

Neobee M-20 0.92 5 to 437 °F (–15 to 225 °C) ★ 

P (5)(6) 

Propylene Glycol and Water 1.02 5 to 203 °F (–15 to 95 °) ★ 

Seal Connection Type / Capillary ID, Description (See descriptions on page 3) 


B 0.03-in. (0.711 mm) ID ★ 

C 0.04-in. (1.092 mm) ID ★ 

D 0.075-in. (1.905 mm) ID ★ 

E 0.03-in. (0.711 mm) ID, PVC Coated ★ 

F 0.04-in. (1.092 mm) ID, PVC Coated ★ 

G 0.075-in. (1.905 mm) ID, PVC Coated ★ 

H 0.03-in. (0.711 mm) ID, 4-in. Support Tube ★ 

J 0.04-in. (1.092 mm) ID, 4-in. Support Tube ★ 

K 0.075-in. (1.905 mm) ID, 4-in. Support Tube ★ 

M (7) 

0.03-in. (0.711 mm) ID, PVC Coated, 4-in. Support Tube with Closed End ★ 

N (7) 


P (7) 


49


Table 15. Rosemount 1199 Remote Mount Seal Systems Ordering Information 



50 


00813-0100-4016, Rev MB 


Capillary Length / Direct Mount 


01 1 ft (0.3 m) ★ 

05 5 ft (1.5 m) ★ 

10 10 ft (3.0 m) ★ 

15 15 ft (4.5 m) ★ 

20 20 ft (6.1 m) ★ 

51 1.6 ft (0.5 m) ★ 

52 3.3 ft (1.0 m) ★ 

53 4.9 ft (1.5 m) ★ 

54 6.6 ft (2.0 m) ★ 

55 8.2 ft (2.5 m) ★ 

56 9.8 ft (3.0 m) ★ 

57 11.5 ft (3.5 m) ★ 

58 13.1 ft (4.0 m) ★ 

59 16.4 ft (5.0 m) ★ 

60 19.7 ft (6.0 m) ★ 


25 25 ft (7.6 m) 

30 30 ft (9.1 m) 

35 35 ft (10.7 m) 

40 40 ft (12.2 m) 

45 45 ft (13.7 m) 

50 50 ft (15.2 m) 

61 23 ft (7.0 m) 

62 26.2 ft (8.0 m) 

63 29.5 ft (9.0 m) 

64 32.8 ft (10.0 m) 

65 36.1 ft (11.0 m) 

66 39.4 ft (12.0 m) 

67 42.6 ft (13.0 m) 

68 45.9 ft (14.0 m) 

69 49.2 ft (15.0 m) 


(2) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70°F and must be further derated if ambient, temperature exceeds 70 °F (21 °C). 

(3) Temperature limits are reduced in vacuum service and may be limited by seal selection. 

(4) Not available with Seal Connection Type \ Capillary ID, Description codes B, E, H or M. 



(7) Compression fitting does not provide a hermetic seal.


00813-0100-4016, Rev MB 






Flanged Seal Assemblies Process Connections 


page 54 FFW Flush Flanged Seal 2-in. / DN 50 / 50A 

3-in. / DN 80 / 80A 

4-in. / DN 100 / 100A 

★ 


page 57 RFW Flanged Seal 

1 

/2-in. / DN 15 

3 /4-in. 

1-in. / DN 25 / 25A 

1 1 /2-in. / DN 40 / 40A 

page 60 EFW Extended Flanged Seal 1 1 /2-in. / DN 40 / 40A 

2-in. / DN 50 / 50A 


/ DN 80 / 80A 


/ DN 100 / 100A 

page 63 PFW Pancake Seal 2-in. / DN50 

3-in. / DN 80 

page 65 FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface 2-in. 

3-in. 

page 67 RCW Ring Type Joint (RTJ) Flanged Seal ½-in. 

¾-in. 

1-in. 

1 ½-in. 

page 69 FUW and FVW Flush Flanged Type Seals DN 50 

DN 80 

Threaded Seal Assemblies Process Connections 


page 70 RTW Threaded Seal ¼ –18 NPT 

3 

/8 –18 NPT 

½ –14 NPT 

¾ –14 NPT 

1 – 11.5 NPT 

1 ¼ –11.5 NPT 

1 ½ –11.5 NPT 

G1 /2 A DIN 16288 

R1 /2 per ISO 7/1 

★ 


page 73 HTS Male Threaded Seal G1 

G1 ½ 

G2 

1-11.5 NPT 

1 ½ -11.5 NPT 

2-11.5 NPT 

★ 

★ 

★ 

51




52 


00813-0100-4016, Rev MB 


Hygienic Seal Assemblies Process Connections 


page 74 SCW Hygienic Tri-Clover Style Tri-Clamp Seal 1 ½-in. 

2-in. 

2 ½-in. 

3-in. 

4-in. 

★ 


page 76 SSW Hygienic Tank Spud Seal 2-in. Extension 

6-in. Extension 

page 78 STW Hygienic Thin Wall Tank Spud Seal 0.8 in Extension 

page 79 EES Hygienic Flanged Tank Spud Extended Seal DN 50 

DN 80 

page 80 VCS Tri-clamp ® In-Line Seal 1-in. 

1 ½-in. 

2-in. 

3-in. 

4-in. 

page 81 SVS Varivent ® Compatible Hygienic Connection Seal Tuchenhagen Varivent 

Compatible 

page 82 SHP Hygienic Cherry-Burrell “I” Line Seal 2-in. 

3-in. 

page 83 SLS Dairy Process Connection - Female Thread Seal per DIN 11851 DN 40 

DN 50 

Specialty Seal Assemblies 


Process Connections 

page 84 WSP Saddle Seal 2-in. 

3-in. 

4-in. or Larger 

★


00813-0100-4016, Rev MB 



page 85 UCP Male Threaded Pipe Mount Seals and PMW Paper Mill Sleeve 

Seals 



page 86 CTW Chemical Tee Seal Retro-fit 

1 ½-in. with Threaded 

Knurled Nut 

1-in. with Cap Screw 

Retainer 

page 87 TFS Wafer Style In-Line Seal 1-in. / DN 25 

1 ½-in. / DN 40 

2-in. / DN 50 

3-in. / DN 80 

4-in. / DN 100 

page 88 WFW Flow-Thru Flanged Seal 1-in. 

2-in. 

3-in. 

53


54 

FFW FLUSH FLANGED SEAL 

Flanged Seals 

Table 16. FFW Flush Flanged Seal – Ordering Information 



Code Industry Standards 


00813-0100-4016, Rev MB 



A ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers) ★ 

D EN 1092-1 (European Standard) ★ 

T 


GOST 12815-80 (Russian Standard) ★ 

J JIS B2238 (Japanese Industrial Standard) 



FFW Flush Flanged Seal ★ 


ANSI/ASME B16.5 EN 1092-1 / GOST 12815-80 JIS B2238 


G 2-in. DN 50 50 A ★ 

7 3-in. — 80 A ★ 

J — DN 80 — ★ 

9 4-in. DN 100 100 A ★ 




1 Class 150 — 10K ★ 

2 Class 300 — 20K ★ 

4 Class 600 — 40K ★ 

G 


— PN 40 — ★ 

E — PN 10 / 16 (DN 100 only) — 

5 Class 900 — — 

6 Class 1500 — — 

7 Class 2500 — — 

H — PN 63 — 

J — PN 100 — 

K — PN 160 — 

Diaphragm and Wetted, Upper Housing, Flange Material 

Diaphragm and Wetted Upper Housing Flange 


CA (1)(2) 316L SST 316L SST CS ★ 

DA (2) 

316L SST 316L SST 316 SST ★ 

CB (1)(3) Alloy C-276, seam welded 316L SST CS ★ 

DB (3) Alloy C-276, seam welded 316L SST 316 SST ★ 

CC (1) 

Tantalum, seam welded 316L SST CS ★ 

DC Tantalum, seam welded 316L SST 316 SST ★ 

C3 (1)(2)(3)(4) Tantalum, brazed 316L SST CS ★ 

D3 (1)(2)(3)(4) Tantalum, brazed 316L SST 316 SST ★


00813-0100-4016, Rev MB 




MB (1)(2) Alloy C-276, solid faceplate Alloy C-276 / 316L SST CS 

KB (1)(2) 

Alloy C-276, solid faceplate Alloy C-276 / 316L SST 316 SST 

DJ Alloy B 316L SST 316 SST 

DF 304L SST 316L SST 316 SST 

DV Alloy 400 316L SST 316 SST 

RH (2) (5) Titanium Grade 4 Titanium GR.4 316 SST 

DH (6) Titanium Grade 4 316L SST 316 SST 

DE Alloy 600 316L SST 316 SST 

DP Nickel 201 316L SST 316 SST 

WW (2)(7) 316Ti SST (WNr 1.4571) 316Ti SST (WNr 1.4571) 316Ti SST (WNr 1.4571) 

DZ (6) 

Zirconium 702 316L SST 316 SST 

D4 Alloy C-22 316L SST 316 SST 

D5 Duplex 2507 SST 316L SST 316 SST 



0 None ★ 

A 316L SST ★ 

B 



2 Duplex 2205 SST 

H Titanium Grade 4 

6 Nickel 201 

V Alloy 400 

Flushing Connection Options, Quantity (Size) 


0 None ★ 

1 1 ( 1 /4-18 NPT) ★ 

3 2 ( 1 /4-18 NPT) ★ 

7 1 ( 1 /2-14 NPT) ★ 

9 2 ( 1 Table 16. FFW Flush Flanged Seal – Ordering Information 



/2-14 NPT) ★ 


Gasket Material 


J 


PTFE gasket (for use with flushing connection ring) ★ 

N Grafoil gasket (for use with flushing connection ring) 

K Barium Sulfate filled PTFE gasket (for use with flushing connection ring) 

Flushing Plug, Vent/Drain Valve 


D Alloy C-276 plug(s) for flushing connection(s) ★ 

G 316 SST plug(s) for flushing connection(s) ★ 

H 316 SST vent/drain for flushing connection(s) ★ 

Diaphragm Thickness 


C 0.006-in. (150 µm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications 

7 0.002-in. (50 µm) available with 316L SST and Alloy C-276 

Mounting Flange 


4 (9) 

Flat face, flush flanged 

55


56 


00813-0100-4016, Rev MB 


Code Conformance 


T (10) 

Table 16. FFW Flush Flanged Seal – Ordering Information 



Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103 ★ 

Gasket Surface Finish 


1 Gasket Surface Ra 125 Max. 



B Extra Fill For Cold Temp Application ★ 

Diaphragm Coating 


U (11) 

0.001-in. ±0.0002-in. (25 µm ±5 µm) gold plated Diaphragm 

V (11)(12) PTFE coated diaphragm for nonstick purposes only 

Capillary Change 


2 Radial capillary connection 

Alternate Design 


E One Piece Design ★ 

Typical Model Number: 1199 W DC 1 0 A FFW 7 1 DA 0 0 

(1) Only available with two piece design. 

(2) For use with spiral wound metallic gaskets. 

(3) Not available with option code C. 

(4) Only available in Process Connection Size code G, 7, and J. 

(5) Not available with welded capillary connections or direct mount. 

(6) Operating temperature limited to 302 °F (150 °C). 

(7) Only available with one-piece design, option code E. 

(8) Supplied standard with ThermoTork TN9000. 

(9) The mounting flange and upper housing are a single item for the one-piece design. Only available with diaphragm and wetted part material codes DA, DB, 

DJ, DF, DV, DH, DE, DP, WW, DZ, D4, DC, and D5. 



environments. 

(11) Only available on 316LSS, Alloy 400 and Alloy C-276. 

(12) Not available with transmitter option code Q8, for Material Traceability per EN 10204 3.1 of the transmitter / seal assembly.


00813-0100-4016, Rev MB 


RFW FLANGED SEAL 


Table 17. RFW Flanged Seal Ordering Information 



Code Industry Standard 




T 



J JIS B2238 (Japanese Industrial Standard) 



RFW Flanged Seal ★ 




2 1-in. — 25A ★ 

4 1 1 /2-in. — 40A ★ 

D — DN 25 — ★ 

F 


— DN 40 — ★ 

1 1 /2-in. — — 

A 3 /4-in. DN 10 10A 

B — DN 15 15A 

C — DN 20 20A 

Flange/Pressure Rating 



1 Class 150 — 10K ★ 

2 Class 300 — 20K ★ 

4 Class 600 — 40K ★ 

G 


— PN 40 — ★ 

5 Class 900 — — 

6 Class 1500 — — 

7 Class 2500 — — 

C — PN 6 — 

H — PN 63 — 

J — PN 100 — 

K — PN 160 — 

Diaphragm, Upper Housing, Flange Material 

Diaphragm Upper Housing Flange 








57


58 


00813-0100-4016, Rev MB 








DK Alloy 20 316L SST 316 SST 

RH (1) Titanium Grade 4 Titanium Grade 4 316 SST 

DH Titanium Grade 4 316L SST 316 SST 

D4 Alloy C-22 316L SST 316 SST 


DZ Zirconium 702 316L SST 316 SST 



A 316L SST ★ 


D 


Plated CS ★ 

2 Duplex 2205 

F 304L SST 


V Alloy 400 

C Tantalum lined 316L SST (no flushing connection allowed) 

Flushing Connection Options, Quantity Size 


5 None ★ 

1 1 ( 1 /4-18 NPT) ★ 

3 2 ( 1 Expanded 

/4-18 NPT) ★ 

7 1 ( 1 /2-14 NPT) 

9 2 ( 1 /2-14 NPT) 




J 


PTFE gasket ★ 

N Grafoil ® gasket 

K Barium Sulfate filled PTFE gasket 

R Ethylene Propylene gasket 









Bolt Material 


3 304 SST Bolts (Only available for Stud Bolt Design) 


T (3) Table 17. RFW Flanged Seal Ordering Information 



Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103 ★


00813-0100-4016, Rev MB 






Cold Temperature Application 





U (4) 

0.001-in. ±0.0002-in. (25 µm ±5 µm) Gold plated diaphragm 

V (4)(5) Table 17. RFW Flanged Seal Ordering Information 



PTFE coated diaphragm for nonstick purposes only 

Large Diaphragm Size 


9 4.1-in. (104 mm) Diaphragm Diameter 

Typical Model Number: 1199 W DC 1 0 A RFW 2 1 DA A 5 





environments. 


(5) Not available with transmitter option code Q8, for Material Traceability per EN 10204 3.1 of the transmitter / seal assembly. 

59


60 

EFW EXTENDED FLANGED SEAL 

Table 18. EFW Extended Flanged Seal Ordering Information 




00813-0100-4016, Rev MB 


Code Industry Standard ● = Available 

— = 

Unavailable 




T 



J JIS B2238 (Japanese Industrial Standards) 



EFW Extended Flanged Seal ★ 


ANSI/ASME B16.5 EN 1092-1 / GOST 12815-80 JIS B2238 Extension 

Diameters 


7 3-in. Schedule 80 DN 80 80A 2.58-in. (66 mm) ★ 

9 


4-in. Schedule 80 DN 100 100A 3.50-in. (89 mm) ★ 

4 1 1 /2-in. DN 40 40A 1.45-in. (37 mm) 

G 2-in. DN 50 50A 1.90-in. (48 mm) 

H 3-in. (Headbox) DN 80 (Headbox) — 2.875-in. (73 mm) 

K 4-in. (Headbox) DN 100 (Headbox) 3.780-in. (96 mm) 

R 3-in. Schedule 40 DN 80 80A 2.85-in. (73 mm) 

T 4-in.(Schedule 40) DN 100 100A 3.70-in. (94 mm) 




1 Class 150 — 10K ★ 

2 Class 300 — 20K ★ 

4 Class 600 — 40K ★ 

G 


— PN 40 — ★ 

E — PN 10/16 (DN 100 only) — 

5 Class 900 — — 

6 Class 1500 — — 

7 Class 2500 — — 

H — PN 63 — 

J — PN 100 — 

K — PN 160 — 

J — PN 100 — 

K — PN 160 —


00813-0100-4016, Rev MB 



Table 18. EFW Extended Flanged Seal Ordering Information 



Diaphragm, Extension and Gasket Surface, Upper Housing, Flange Material Available with Process 

Connection Code 

Code Diaphragm Extension/ 

Gasket Surface 

Upper 

Housing 

Mounting 

Flange 7 9 4 G H K 


DA 316L SST 316L SST 316L SST 316 SST ● ● ● ● ● ● ★ 

CA 316L SST 316L SST 316L SST CS ● ● ● ● ● ● ★ 

DB Alloy C-276 Alloy C-276 316L SST 316 SST ● ● ● ● ● ● ★ 

CB 


Alloy C-276 Alloy C-276 316L SST CS ● ● ● ● ● ● ★ 

DM Alloy C-276 316L SST 316L SST 316 SST ● ● ● ● ● ● 

DD Tantalum 316L SST 316L SST 316 SST ● ● — — — — 

DC (1) 

Tantalum Tantalum Lined 316L SST 316 SST ● ● — ● — — 

D5 Duplex 2507 SST Duplex 2205 SST 316L SST 316 SST ● ● ● ● ● ● 

D9 Duplex 2507 SST 316L SST 316L SST 316 SST ● ● ● ● ● ● 


ANSI/ASME B16.5 EN 1092-1 / JIS B2238 / GOST 12815-80 


2 2-in. 50 mm ★ 

4 4-in. 100 mm ★ 

6 


6-in. 150 mm ★ 

8 8-in. 200 mm 

1 1-in. 25 mm 

3 3-in. 75 mm 

5 5-in. 125 mm 

7 7-in. 175 mm 

9 9-in. 225 mm 

Fractional Extension Length 

ANSI/ASME B16.5 EN 1092-1 / JIS B2238 / GOST 12815-80 


0 0-in. 0 mm ★ 







T (2) 

Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103 ★ 






B Extra Fill For Cold Temperature Application ★ 

61




U (3) 


V (3)(4) Table 18. EFW Extended Flanged Seal Ordering Information 




Typical Model Number: 1199 W DC 1 0 A EFW 7 1 DA 2 0 

62 


00813-0100-4016, Rev MB 


(1) Requires Gasket Surface Finish Code 1 Gasket Surface Finish Ra 125 Max. Available in extension lengths 2, 4 & 6 in. For all other lengths consult factory. 



environments. 




00813-0100-4016, Rev MB 


PFW PANCAKE SEAL 


Table 19. PFW Pancake Seal Ordering Information 







T GOST 12815-80 (Russian Standard) ★ 



PFW Pancake Seal ★ 


ANSI EN 1092-1 / GOST 12815-80 


G 2-in. DN 50 ★ 

7 3-in. — ★ 

J — DN 80 ★ 


ANSI EN 1092-1 / GOST 12815-80 


0 No flange supplied, seal MWP based on customer supplied flange ★ 

1 Class 150 — ★ 

2 Class 300 — ★ 

4 Class 600 — ★ 

G 


— PN40 ★ 

5 Class 900 — 

6 Class 1500 — 

7 Class 2500 — 

H — PN 63 

J — PN 100 




LA (1) 

316L SST 316L SST None ★ 

CA (1) 316L SST 316L SST CS ★ 

DA (1) 316L SST 316L SST 316 SST ★ 

LB Alloy C-276, Seam Welded 316L SST None ★ 

CB Alloy C-276, Seam Welded 316L SST CS ★ 

DB Alloy C-276, Seam Welded 316L SST 316 SST ★ 

LC Tantalum, Seam Welded 316L SST None ★ 

CC Tantalum, Seam Welded 316L SST CS ★ 

DC Tantalum, Seam Welded 316L SST 316 SST ★ 



0 None ★ 

A 316L SST ★ 


63


64 


00813-0100-4016, Rev MB 




0 None ★ 

1 1 ( 1 /2-14 NPT) ★ 

2 2 ( 1 /2-14 NPT) ★ 

7 1 ( 1 /2-14 NPT) ★ 

9 2 ( 1 /2-14 NPT) ★ 




J 


PTFE gasket ★ 

N Grafoil ® Table 19. PFW Pancake Seal Ordering Information 



gasket 












T (3) Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103 ★ 









U (4) 0.001-in. ±0.0002-in. (25 µm ±5 µm) Gold plated diaphragm 

V (4)(5) 


Typical Model Number: 1199 W DC 1 0 A PFW 7 1 DA 0 0 

(1) For use with customer supplied spiral wound metallic gaskets. 

(2) Supplied standard with Thermo Torque TN9000 gasket. 



environments. 

(4) Only available on 316LSS, Alloy 400, and Alloy C-276. 



00813-0100-4016, Rev MB 



FCW FLUSH FLANGED SEAL – RING TYPE JOINT (RTJ) GASKET SURFACE 

Table 20. FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface Ordering Information 

This seal is part of the Expanded offering and is subject to additional delivery lead time. 

Code Industry Standards 


A ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers) 



FCW Flush Flanged Seal - Ring Type Joint Gasket Surface 



G 2-in. 

7 3-in. 



1 Class 150 

2 Class 300 

4 Class 600 

5 Class 900 

6 Class 1500 

7 Class 2500 




DA 316L SST 316L SST 316 SST 

KB Alloy C-276 316L SST 316 SST 

K5 Duplex 2507 SST/Duplex 2205 316L SST 316 SST 

Flushing Connection Ring Material (Lower Housing) 


0 None 

A 316L SST 

B Alloy C-276 


Flushing Connection Options 


0 None 

1 1 ( 1 /4-18 NPT) 

3 2 ( 1 /4-18 NPT) 

7 1 ( 1 /2-14 NPT) 

9 2 ( 1 /2-14 NPT) 




D Alloy C-276 plug(s) for flushing connection(s) 

G 316 SST plug(s) for flushing connection(s) 

H 316 SST vent/drain for flushing connection(s) 

65





7 0.002-in. (50 µm) available with 316L SST and Alloy C-276 



T (1) 

Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103 

Cold Temp Application 


B Extra Fill For Cold Temp Application 



U (2) 


V (2)(3) Table 20. FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface Ordering Information 





E One Piece Design 

Typical Model Number: 1199 W DC 1 0 A FCW 7 1 DA 0 0 

66 


00813-0100-4016, Rev MB 




environments. 

(2) Only available on 316LSS and Alloy C-276. 



00813-0100-4016, Rev MB 


RCW RING TYPE JOINT (RTJ) FLANGED SEAL 

Table 21. RCW Ring Type Joint Flanged Seal Ordering Information 








RCW Flanged Seal - Ring Type Joint Gasket Surface 



1 1 

/2-in. (Bolts and studs included for ANSI Class 300 to 1500, not available for ANSI Class 150) 

3 A 

/4-in. (Not available for Class 150) 

2 1-in. 

4 11 /2-in. 



1 Class 150 

2 Class 300 

4 Class 600 

5 Class 900 

6 Class 1500 

7 Class 2500 




DA 316L SST 316L SST 316 SST 

DB Alloy C-276 316L SST 316 SST 

DC Tantalum 316L SST 316 SST 



DJ Alloy B316L SST 316L SST 316 SST 



RH Titanium Grade 4 Titanium Grade 4 316 SST 

DH (1) Titanium Grade 4 316L SST 316 SST 

D4 Alloy 22 316L SST 316 SST 


DZ (1) Zirconium 702 316L SST 316 SST 




A 316L SST 

B Alloy C-276 

F 304L SST 



V Alloy 400 

67




5 None 

1 1 ( 1 /4-18 NPT) 

3 2 ( 1 /4-18 NPT) 

7 1 ( 1 /2-14 NPT) 

9 2 ( 1 Table 21. RCW Ring Type Joint Flanged Seal Ordering Information 


/2-14 NPT) 




J PTFE gasket 






D Alloy C-276 plug(s) for flushing connection(s) 

G 316 SST plug(s) for flushing connection(s) 

H 316 SST vent/drain for flushing connection(s) 




Bolt Material (Optional) 


3 304 SST Bolts (Only available for Stud Bolt Design) 



T (2) Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103 



B Extra Fill For Cold Temp Application 



U (3) 0.001-in. ±0.0002-in. (25 µm ±5 µm) Gold plated diaphragm 

V (3)(4) PTFE coated diaphragm for nonstick purposes only 

Large Diaphragm Size 


9 4.1-in. (104 mm) Diaphragm Diameter 

Typical Model Number: 1199 W DC 1 0 A RCW 2 1 DA A 5 

68 

(1) Operating temperature is limited to 302 °F (150 °C). 


00813-0100-4016, Rev MB 




environments. 




00813-0100-4016, Rev MB 


FUW AND FVW FLUSH FLANGED TYPE SEALS 

Table 22. FUW and FVW Flush Flanged Type Seals – EN Ordering Information 

This seal is part of the Expanded offering is subject to additional delivery lead time. 



D EN 1092-1 (European Standard) 

T GOST 12815-80 (Russian Standard) 



FUW Flush Flanged, EN 1092-1 Type D (Groove) 

FVW Flush Flanged, EN 1092-1 Type C (Tongue) 



G DN 50 

J DN 80 



G PN 40 


Diaphragm and Wetted 


Upper Housing Flange 

DA (1) 316L SST 316L SST 316 SST 

KB (2) 

Alloy C-276 316L SST 316 SST 

DC (1) Tantalum 316L SST 316 SST 



0 None 



0 None 




B Extra Fill For Cold Temperature Application 



E One Piece Design 

Typical Model Number: 1199 W DC 1 0 A FUW J G DA 0 0 

(1) Only available with one piece design, option code E. 

(2) Only available with two-piece design. 


69


70 

RTW THREADED SEAL 

Threaded Seals 

Table 23. RTW Threaded Seal Ordering Information 





00813-0100-4016, Rev MB 



A ANSI/ASME B1.20.1 (American National Standards Institute/American Society of Mechanical Engineers ★ 




RTW Threaded (standard thread is female, for male select Option code 9) ★ 


ANSI/ASME B1.20.1 EN 10226-1 


3 

1 

/2-14 NPT — ★ 

4 3 /4-14 NPT — ★ 

5 1-11.5 NPT — ★ 

7 (1) 

1 1 Expanded 

/2-11.5 NPT — ★ 

1 1 /4-18 NPT — 

C — Parallel thread: G 1 /2A DIN 16288 

2 3 /8-18 NPT — 

6 (1) 

1 1 /4-11.5 NPT — 

N — Tapered thread: R1 /2 per ISO 7/1 


ANSI/ASME B1.20.1 EN 10226-1 


0 2500 psi 172 bar ★ 


2 (2) 5000 psi 344 bar 

3 (2)(3) 10000 psi — 

8 1500 psi (4.1-in. (104 mm) diaphragm 103 bar (4.1-in. (104 mm) diaphragm 















RH (4) 

Titanium Grade 4 Titanium Grade 4 316 SST 

DH (5) Titanium Grade 4 316L SST 316 SST


00813-0100-4016, Rev MB 



D4 Alloy 22 316L SST 316 SST 



DZ (5) Zirconium 702 316L SST 316 SST 


RZ (4) 

Zirconium 702 Zirconium 702 316 SST 

Flushing Connection Ring Material (Lower Housing) (6)(7) 


A 316L SST ★ 

B 



D Plated Carbon Steel 



V Alloy 400 

F 304L SST 



5 None ★ 

1 1 ( 1 /4-18 NPT) ★ 

3 2 ( 1 Expanded 

/4-18 NPT) ★ 

7 1 ( 1 /2-14 NPT) 

9 2 ( 1 Table 23. RTW Threaded Seal Ordering Information 



/2-14 NPT) 




J PTFE gasket (for use with flushing connection ring) ★ 

N Grafoil ® gasket (for use with flushing connection ring) ★ 

R 


Ethylene Propylene gasket (for use with flushing connection ring) ★ 

K Barium Sulfate filled PTFE gasket (for use with flushing connection ring) 









Bolt Material 


3 


304 SST Bolts ★ 

4 316 SST Bolts 



T (8) Wetted Material Compliance per NACE MR 0175/ISO 15156, MR 0103 ★ 




71




U (9) 


V (9)(10) Table 23. RTW Threaded Seal Ordering Information 




Special Threads in Lower Housing 


9 Male Threads 

Typical Model Number: 1199 W DC 1 0 A RTW 3 0 DA A 5 

72 

(1) Flushing connection not available. 

(2) Consult an Emerson Process Management representative for pricing and availability on Pressure Rating codes 2 or 3. 

(3) The following process connection sizes are D rated: 3 /4-in (9000 psi/621 bar), 1-in. (8700 psi/600 bar), 1 1 /4-in (7000 psi/483 bar), and 

1 1 /2-in. (6000 psi/414 bar). 


(5) Operating temperature is limited to 302 °F (150 °C). 

(6) Supplied with C4401 aramid fiber gasket. 

(7) Flushing Connection Ring/ Lower Housing assembly bolts provided as standard are carbon steel for ANSI and 304 SST for EN. 


00813-0100-4016, Rev MB 




environments. 




00813-0100-4016, Rev MB 


HTS MALE THREADED SEAL 

Table 24. HTS Male Threaded Seal Ordering Information 




A ANSI/ASME B1.20.1 (American National Standards Institute/American Society of Mechanical Engineers) 




HTS Male Threaded Seal 

Process Connection Size, Pressure Rating 

ANSI/ASME B1.20.1 


EN 10226-1 

5A (1) 1-11,5 NPT, 8700 psi (600 bar) — 

7A (2) 1½-11,5 NPT, 6000 psi (414 bar) — 

9A (3) 

2-11,5 NPT, 4000 psi (276 bar) — 

EA (1) — G1, 455 bar (6600 psi) 

GA (2) — G11 /2, BSP, 400 bar (5801 psi) 

JA (3) 

— G2, BSP, 280 bar (4060 psi) 

Diaphragm and Wetted, Upper Housing Material 



Upper Housing 

LA00 316L SST (WNr 1.4435) 316L SST 

Typical Model Number: 1199 W DC 1 0 A HTS 7 A LA 0 0 

(1) Consult factory for calibrated spans lower than 300 psi (21 bar). 

(2) Consult factory for calibrated spans lower than 100 psi (7 bar). 

(3) Consult factory for calibrated spans lower than 50 psi (3,4 bar). 


73


74 

Hygienic Seals 

SCW HYGIENIC TRI-CLOVER STYLE TRI-CLAMP SEAL 

Table 25. SCW Hygienic Tri-Clover Style Tri-Clamp Seal Ordering Information 



Industry Standard 


00813-0100-4016, Rev MB 



S Hygienic Seal (Conforms to 3-A Standard 74-03) ★ 



SCW (1) Tri-Clover Style Tri-Clamp Seal ★ 



30 (2) 1½-in. ★ 

50 (3) 

2-in. ★ 

70 


3-in. ★ 

60 2½-in. 

90 4-in. 


Diaphragm and Wetted Upper Housing 


LA00 


316L SST (WNr 1.4435) 316L SST ★ 

LB00 Alloy C-276 316L SST 


Surface Finish 


D 10 �in. (0.25 �m) Ra surface finish 

G 15 �in. (0.375 �m) Ra surface finish 

H 20 �in. (0.50 �m) Ra surface finish 

Non-Hygienic Fill Fluid 


P Non-Hygienic fill fluid (does not conform to 3-A Standard 74) 

Clamp and Gasket Material 


2 High-Pressure Ladish Clamp & Nitrile butadiene (NBR) gasket 

3 Nitrile butadiene (NBR) gasket 

Polishing 


6 Electro polishing 

Typical Model Number: 1199 W NC 1 0 S SCW 7 0 LA 0 0 

(1) Clamp and gasket furnished by user. The maximum working pressure is dependent upon the clamp pressure rating. 


(3) Consult factory for calibrated spans lower than 5 psi (345 mbar).


00813-0100-4016, Rev MB 


Table 26. High Pressure Ladish Clamp Maximum Working Pressure 

Process connection size 70 °F (21 °C) 250 °F (121 °C) 

1 1 /2-in. 1,500 psi (103 bar) 1,200 psi (83 bar) 

2-in. 1,000 psi (69 bar) 800 psi (55 bar) 

2 1 /2-in. 1,000 psi (69 bar) 800 psi (55 bar) 




75


SSW HYGIENIC TANK SPUD SEAL 

Table 27. SSW Hygienic Tank Spud Seal Ordering Information 




(3) Requires Option code 6, Electro polishing. 

76 


00813-0100-4016, Rev MB 



S Hygienic Seal (Conforms to 3-A Standard 74-03) ★ 



SSW (1) Tank Spud Seal ★ 



A0 600 psi (41 bar) ★ 

Upper Housing 


A 316L SST ★ 


Diaphragm and Wetted Extension 


AL 316L SST (WNr 1.4435) (2) 

316L SST (2) ★ 


BB Alloy C-276 316L SST ★ 



2 2-in. ★ 

6 6-in. ★ 




G (3) 15 �in. (0.375 �m) diaphragm surface finish 

H 20 �in�(0.5 �m) diaphragm surface finish 



C 0.006-in. (150 �m) 

Tank Spud 


1 Tank Spud Included with Shipment ★ 



P Non-Hygienic fill fluid (Does not conform to 3-A Standard 74) 



3 Nitrile butadiene (NBR) O-ring instead of Standard Ethylene Propylene O-ring (Conforms to 3-A Standard 74) 

4 Fluorocarbon (FMK) ® O-ring, instead of Standard Ethylene Propylene O-ring (Conforms to 3-A Standard 74) 

Polishing 



Typical Model Number: 1199 W NC 1 0 S SSW A 0 AA L 2 

(1) Clamp and Ethylene Propylene o-ring (conforms to 3-A standard 74 and USP class VI) supplied. 

(2) Diaphragm brazed and TIG-welded to extension.


00813-0100-4016, Rev MB 


Sanitary Tank Spud Accessories 

5.98 

(152) 

3.70 

(94) 

0.50 

(13) 

0.19 (5) 

0.09 

(2) 

Table 28. Sanitary Tank Spud Optional Accessories 

Tank Spud and Clamp 

Rosemount 1151 with 1151 Direct Mount Sanitary 

Tank Spud with Tank Spud and Clamp 

Tank Spud Tank Spud Plug 

Dimensions are in inches (millimeters) 

Model Description Model Description 

1199-0061- Sanitary Tank Spud (1) 1199-0552- Sanitary Tank Spud Plug 

Code Size Code Size 

0001 2 in. 0001 2 in. 

0002 6 in. 0002 6 in. 


(1) Welding procedures and material certifications are shipped with the tank spud. Standard material is cast equivalent of 316L SST per ASTM- A351 grade 

CF3M. 

Table 29. Sanitary Tank Spud Spare Parts 

Part Number Description 

01199-0526-0002 Clamp 

C53185-0070-0341 Ethylene Propylene O-ring 

A 

20° ± 1° 

5.22 

(133) 

37-01 

74 

R 

5.22 

(133) 

3.93 

(100) 

3.63 

(92) 

A 

1.10 

(28) 

20° 

77


78 

STW HYGIENIC THIN WALL TANK SPUD SEAL 

Table 30. STW Hygienic Thin Wall Tank Spud Seal Ordering Information 


Code 



S Hygienic Seal (Conforms to 3-A Standard 74-03) 



STW (1) Thin Wall Tank Spud Seal 



B0 4-in. Tri-Clamp, 600 psi (41 bar) 




Extension 


BB00 Alloy C-276 Alloy C-276 




G (2) 15 �in. (0.375 �m) diaphragm surface finish 

H 20 �in�(0.5 �m) diaphragm surface finish 



P Non-Hygienic fill fluid (Does not conform to 3-A Standard 74) 

Polishing 



Typical Model Number: 1199 W NC 1 0 S STW B 0 LA 0 0 

(1) For tank walls up to 3 /16-in. thick. Clamp and Ethylene Propylene o-ring supplied. 



00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 


EES HYGIENIC FLANGED TANK SPUD EXTENDED SEAL 

Table 31. EES Hygienic Flanged Tank Spud Extended Seal Ordering Information 



Code 






EES Flanged Tank Spud Seal 



GG DN 50, PN 40 

JG DN 80, PN 40 




Extension 

LA 316L SST (WNr 1.4435) 316L SST 

LB Alloy C-276 316L SST 

Extension Length (1) 


10 25 mm (1-in.) 




G (2) 15 µ-in. (0.375 µm) Ra surface finish 

H 20 µ-in. (0.50 µm) Ra surface finish 



1 Fluorocarbon (FMK) O-ring, instead of Standard Ethylene Propylene O-ring (Conforms to 3-A Standard 74) 




Polishing 



Typical Model Number: 1199 W NC 1 0 S EES J G LA 1 0 

(1) Other extension lengths are available upon request. 


79


80 

VCS TRI-CLAMP ® IN-LINE SEAL 

Table 32. VCS Tri-Clamp In-Line Seal Ordering Information 


Code 






VCS (1) In-Line Tri-Clover Style Tri-Clamp Seal 



20 (2) 1-in. 

30 (3) 

1½-in. 

50 2-in. 

70 3-in. 

90 4-in. 




Upper Housing 





G (4) 15 �-in. (0.375 �m) Ra surface finish 

H 20 µ-in. (0.50 µm) Ra surface finish 



P 

Polishing 


Non-Hygienic fill fluid (does not conform to 3-A Standard 74) 


Typical Model Number: 1199 W NC 1 0 S VCS 7 0 LA 0 0 

(1) Gasket and clamp are furnished by the user. The maximum working pressure is dependent upon the clamp pressure rating. 





00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 



SVS VARIVENT ® COMPATIBLE HYGIENIC CONNECTION SEAL 

Table 33. SVS Varivent ® Compatible Hygienic Connection Seal Ordering Information 


Code 






SVS Tuchenhagen Varivent Compatible Seal 



V0 (1) Varivent ® Type N DN 40-162 




Upper Housing 









Polishing 



Typical Model Number: 1199 W NC 1 0 S SVS V 0 LA 0 0 


81


82 

SHP Hygienic Cherry-Burrell “I” LINE SEAL 

Table 34. SHP Hygienic Cherry-Burrell “I” Line Seal Ordering Information 


Code 






SHP (1) Cherry-Burrell “I” Line Style Seal 



50 (2) 2-in. 

70 3-in. 




Upper Housing 

AA00 316L SST (WNr 1.4435) 316L SST 





Typical Model Number: 1199 W NC 1 0 S SHP 7 0 AA 0 0 

(1) Clamp and gasket furnished by user. Maximum working pressure is the lesser of either clamp pressure rating or 500 psi. 



00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 



SLS DAIRY PROCESS CONNECTION - FEMALE THREAD SEAL PER DIN 11851 

Table 35. SLS Hygienic Dairy Process Connection Female Thread Seal Ordering Information 


Code 






SLS Dairy Process Connection - Female Thread 

Process Connection Size, Pressure Rating, Material 


F0 (1) 

DIN 11851 with coupling nut DN 40, PN 40, 304 SST 

G0 (2) 

DIN 11851 with coupling nut DN 50, PN 25, 304 SST 




Upper Housing 



Polishing 



Typical Model Number: 1199 W HC 1 0 S SLS J 0 LA 0 0 



83


WSP SADDLE SEAL 

Specialty Seals 

Table 36. WSP Saddle Seal Ordering Information 


Code 



N Non-Industry Standard 



WSP Saddle Seal 



G 2-in. Pipe size 

7 3-in. Pipe size 

9 4-in. or larger Pipe size 



1 1500 psig at 100 °F (103 bar at 38 °C); eight bolt holes 

0 1250 psig at 100 °F (86 bar at 38 °C); six bolt holes 

Diaphragm, Upper Housing Material 

Diaphragm 


Upper Housing 

LA 316L SST 316L SST 


LC Tantalum 316L SST 

Lower Housing Material (1)(2) 


00 None 

L5 316L SST 

B5 Alloy C-276 

D5 Plated Carbon Steel 




J PTFE gasket 







V (4) PTFE Coated Diaphragm for nonstick purposes (316L SST and Alloy C-276 diaphragms only) 

Typical Model Number: 1199 W DC 1 0 N WSP 7 1 LA L N 

(1) Standard pipe schedule 40/40S, for other pipe schedules consult the factory. 



00813-0100-4016, Rev MB 




environments. 

(4) Not available with transmitter option code Q8, for Material Traceability per EN10204 3.1 of the transmitter / seal assembly. Only available on 316LSS and 

Alloy C-276. 

84


00813-0100-4016, Rev MB 



UCP MALE THREADED PIPE MOUNT SEALS AND PMW PAPER MILL 

SLEEVE SEALS 

Table 37. UCP and PMW Threaded Pipe Mount Seal Ordering Information 







UCP Male Threaded Pipe Mount Seal 

PMW Paper Mill Sleeve 



30 (1) 11 /2-in., Threaded Knurled Nut, 600 psi at 100 °F (41 bar at 38 °C) (UCP only) 

50 (2) 1-in., Cap Screw Retainer, 300 psi at 100 °F (21 bar at 38 °C) (PMW only) 




Upper Housing 

AA 316L SST 316L SST 

BB Alloy C-276 Alloy C-276 

Lower Housing Material 


00 None 

A0 316L SST 

B0 Alloy C-276 




V (3) PTFE coated diaphragm for nonstick purposes only 

Typical Model Number: 1199 W DC 1 0 N UCP 3 0 AA A 0 

(1) Only available with UCP process connection size. Consult factory for calibrated spans lower than 50 psi (3,4 bar). 

(2) Only available with PMW process connection size. Consult factory for calibrated spans lower than 100 psi (6,9 bar). 

(3) Not available with transmitter option code Q8, for Material Traceability per EN10204 3.1 of the transmitter / seal assembly. 

85


86 

CTW CHEMICAL TEE SEAL 

Table 38. CTW Chemical Tee Seal Ordering Information 


Code 






CTW Chemical Tee Seal 

Maximum Working Pressure (Flange Rating) 


20 300 psi (21 bar) 




Upper Housing 

AA 316L SST 316L SST 

BB Alloy C-276 Alloy C-276 

Lower Housing 


00 None 







V (2) PTFE coated diaphragm for nonstick purposes only 

Typical Model Number: 1199 W NC 1 0 N CTW 2 0 AA 0 0 


00813-0100-4016, Rev MB 




environments. 

(2) Not available with transmitter option code Q8, for Material Traceability per EN10204 3.1 of the transmitter / seal assembly.


00813-0100-4016, Rev MB 


TFS WAFER STYLE IN-LINE SEAL 

Table 39. TFS Wafer Style In-Line Seal Ordering Information 


Code 







TFS Wafer Style In-Line Seal 


ANSI/ASME B16.5 


EN 1092-1 

G 2-in. DN 50 

7 3-in. — 

J — DN 80 

9 4-in. — 

2 (1) 

1-in. — 

4 (2) 1½-in. — 

D (1) — DN 25 

F (2) 

— DN 40 

K — DN 100 



0 Seal MWP based on customer supplied flange 




Upper Housing 



Housing Body Length 


00 3.54-in. (90 mm) 

Typical Model Number: 1199 W DC 1 0 A TFS 7 0 LA 0 0 




87


88 

WFW FLOW-THRU FLANGED SEAL 

Table 40. WFW Flow-Thru Flanged Seal Ordering Information 







WFW (1) Flow-Thru Flanged Seal 

Process Connection Size (2) 


G 2-in. 

7 3-in. 

2 1-in. 

Flange Rating (2) 


1 Class 150 (2) 

Diaphragm, Upper Housing Material 

Diaphragm Upper Housing (2) 



Lower Housing Material (1) 


L 316L SST 

Pipe Schedule (2) 


N 40/40S 




J PTFE O-ring 




Bolt Material 


3 304 SST bolts 







Typical Model Number: 1199 W DC 1 0 A WFW 7 1 LA L N 


(2) Consult factory for special process connection sizes, flange pressure ratings, diaphragm/lower housing materials, and pipe schedules. 


00813-0100-4016, Rev MB 




environments.


00813-0100-4016, Rev MB 


LIQUID LEVEL TRANSMITTER 

SPECIFICATIONS 

Performance Specifications 

Specifications 


For zero-based spans, reference conditions, silicone oil fill, glass-filled PTFE O-rings, SST materials, Coplanar flange (3051SMV, 3051S_C) or 

1 /2-in.- 14 NPT (3051S_T) process connections, digital trim values set to equal range points. 

Conformance to Specification (±3� (Sigma)) 

Technology leadership, advanced manufacturing techniques, and statistical process control ensure measurement specification conformance to 

±3��or better. 

Reference Accuracy (1) 

Stated reference accuracy equations include terminal based linearity, hysteresis, and repeatability, but does not include analog output 

reference accuracy of ±0.005% of span. 

For FOUNDATION fieldbus and wireless devices, use calibrated range in place of span. 

3051SAL_C ±0.065% of span; 

For spans less than 10:1, 

3051L 

2051L 

� 

0.015 + 0.005 

�URL ------------- � % of span 

�span� All Ranges ±0.075% of span 

For spans less than 10:1, accuracy = 

� 

0.025 + 0.005 

� URL 

-------------- � % of Span 

�Span� Ranges 2-4 ±0.075% of span 

For spans less than 10:1, accuracy = 

� 

0.025 + 0.005 

� URL 

-------------- � % of Span 

�Span� (1) Stated reference accuracy equations include terminal based linearity, hysteresis, and repeatability, but does not include analog only reference accuracy of 

±0.005% of span. 

DP Reference Accuracy of 3051S ERS System (1) 

Two Coplanar Gage Sensors (3051SAM_ _G) 

Ultra Classic 

Ranges 2-4 ±0.035% of DP span ±0.078% of DP span 

Range 5 ±0.071% of DP span ±0.092% of DP span 

Two Coplanar (3051SAM_ _A) 

Ultra Classic 


Two In-Line Gage Sensors (3051SAM_ _T) 

Two In-Line Absolute Sensors (3051SAM_ _E) 

Ultra Classic 


Two Liquid Level Sensors (3051SAL) 

Ultra Classic 


(1) DP Accuracy specifications for the 3051S ERS System assume that the configuration contains two sensors with identical ranges that are 

calibrated 0 – URL, and that the DP Span = 10% of each sensor’s URL. 

89


Warranty (1) 

Models (1) Ultra Classic 

3051SAM and 3051SAL 12-year limited warranty (2) 1-year limited warranty (3) 

90 

(1) Warranty details can be found in Emerson Process Management Terms and Conditions of Sale, Document 63445, Rev G (10/06). 


00813-0100-4016, Rev MB 


(2) Rosemount Ultra and Ultra for Flow transmitter have a limited warranty of twelve (12) years from date of shipment. All other provisions of Emerson Process 

Management standard limited warranty remains the same. 

(3) Goods are warranted for twelve (12) months from the date of initial installation or eighteen (18) months from the date of shipment by seller, whichever period 

expires first. 

Dynamic Performance 

Rosemount Level Transmitters - 3051SAL_C, 3051L, and 2051L models - have an 4 - 20 mA HART (1 - 5 Vdc HART Low Power) update rate 

of 22 updates per second. Electronic Remote Sensor Systems - 3051SAM, 3051SAL_P, and 3051SAL_S models - have an 4 - 20 mA HART (1 

- 5 Vdc HART Low Power) update rate of 11 updates per second. See page 94 for WirelessHART update rates. 

For total response time see Instrument Toolkit ® . 

Ambient Temperature Effect 

See Instrument Toolkit. 

Mounting Position Effects 

With liquid level remote mount seal in vertical plane, zero shift of up to ±1 inH2O (2,49 mbar); with remote mount seal in horizontal plane, zero 

shift of up to ±5 inH2O (12,45 mbar) plus extension length on extended units; all zero shifts can be zeroed; no span effect. 

Vibration Effect 

3051SAM 

3051SAL 

3051L 

2051L 

Power Supply Effect 

Less than ±0.1% of URL when tested per the requirements of IEC60770-1 field or pipeline with high vibration level (10-60 Hz 

0.21mm displacement peak amplitude / 60-2000 Hz 3g). 

For Housing Style codes 1J, 1K, 1L, 2J, and 2M: 

Less than ±0.1% of URL when tested per the requirements of IEC60770-1 field with general application or pipeline with low 

vibration level (10-60 Hz 0.15mm displacement peak amplitude / 60-500 Hz 2g). 

Measurement effect due to vibrations is negligible except at resonance frequencies. When at resonance frequencies, 

vibration effect is less than ±0.1% of URL per g when tested between 15 and 2000 Hz in any axis relative to pipe-mounted 

process conditions. 

Less than ±0.1% of URL when tested per the requirements of IEC60770-1 field or pipeline with high vibration level (10-60 Hz 

0.21mm displacement peak amplitude / 60-2000 Hz 3g). 

Less than ±0.005% of calibrated span per volt. 

Electromagnetic Compatibility (EMC) 

Meets all relevant requirements of EN 61326 and NAMUR NE-21. (1) 

(1) NAMUR NE-21 does not apply to wireless output code X. 

Transient Protection (Option T1) 

3051SAM 

3051SAL 

3051L 

2051L 

Meets IEEE C62.41.2-2002, Location Category B 

6 kV crest (0.5 �s - 100 kHz) 

3 kA crest (8 × 20 microseconds) 

6 kV crest (1.2 × 50 microseconds) 

Meets IEEE C62.41, Category B 

6 kV crest (0.5 �s - 100 kHz) 

3 kV crest (8 × 20 microseconds) 

6 kV crest (1.2 × 50 microseconds) 

Meets IEEE C62.41, Category Location B 

6 kV crest (0.5 �s - 100 kHz) 

3 kV crest (8 × 20 microseconds) 

6 kV crest (1.2 × 50 microseconds)


00813-0100-4016, Rev MB 


Functional Specifications 

Range and Sensor Limits 

Table 41. 3051SAM_ _G, 3051SAL_ _D, 3051SAL_ _G Range and Sensor Limits 

Minimum Span Range Limits 

Range 


Ultra Classic Upper (URL) 

Lower (LRL) 

3051SAL_G (1)(2) 3051SAL_D (1) 

2 1.3 inH2O (3,11 mbar) 2.5 inH2O (6,23 mbar) 250.0 inH2O (0,62 bar) -250.0 inH2O (-0,62 bar) -250.0 inH2O (-0,62 bar) 

3 5.0 inH2O (12,4 mbar) 10.0 inH2O (24,9 mbar) 1000.0 inH2O (2,49 bar) -393.0 inH2O (-979 mbar) -1000.0 inH2O (-2,49 bar) 

4 1.5 psi (103,4 mbar) 3.0 psi (206,8 mbar) 300.0 psi (20,7 bar) -14.2 psig (-979 mbar) -300.0 psi (-20,7 bar) 

5 10.0 psi (689,5 mbar) 20.0 psi (1,38 bar) 2000.0 psi (137,9 bar) -14.2 psig (-979 mbar) - 2000.0 psi (-137,9 bar) 

(1) When specifying a 3051SAL Ultra, use Classic minimum span. 

(2) Assumes atmospheric pressure of 14.7 psig (1 bar). 

Table 42. 3051SAM_ _A, 3051SAL_ _A Range and Sensor Limits (1) 

Minimum Span Range and Sensor Limits 

Ultra Classic 

Upper (URL) Lower (LRL) 

1 0.3 psia (20,7 mbar) 0.3 psia (20,7 mbar) 30 psia (2,07 bar) 0 psia (0 bar) 

2 0.75 psia (51,7 mbar) 1.5 psia (0,103 bar) 150 psia (10,34 bar) 0 psia (0 bar) 

3 4 psia (275,8 mbar) 8 psia (0,55 bar) 800 psia (55,16 bar) 0 psia (0 bar) 

4 20 psia (1,38 bar) 40 psia (2,76 bar) 4000 psia (275,8 bar) 0 psia (0 bar) 

Range 

(1) When specifying a 3051SAL Ultra, use Classic minimum span. 

Table 43. 3051SAM_ _T, 3051SAM_ _E, 3051SAL_ _T, 3051SAL_ _E Range and Sensor Limits 

Minimum Span Range and Sensor Limits 

Ultra Classic Upper (URL) Lower (LRL) (Abs.) Lower (1) (LRL) (Gage) 

1 0.3 psi (20,7 mbar) 0.3 psi (20,7 mbar) 30 psi (2,07 bar) 0 psia (0 bar) -14.7 psig (-1,01 bar) 

2 0.75 psi (51,7 bar) 1.5 psi (0,103 bar) 150 psi (10,34 bar) 0 psia (0 bar) -14.7 psig (-1,01 bar) 

3 4 psi (275,8 mbar) 8 psi (0,55 bar) 800 psi (55,16 bar) 0 psia (0 bar) -14.7 psig (-1,01 bar) 

4 20 psi (1,38 bar) 40 psi (2,76 bar) 4000 psi (175,8 bar) 0 psia (0 bar) -14.7 psig (-1,01 bar) 

5 1000 psi (68,9 bar) 2000 psi (137,9 bar) 10000 psi (689,5 bar) 0 psia (0 bar) -14.7 psig (-1,01 bar) 

Range 

(1) Assumes atmospheric pressure of 14.7 psig (1 bar). 

Table 44. 3051L Range and Sensor Limits 

Upper 


Lower (LRL) 

Minimum Span 

(URL) 

3051L Differential 3051L Gage 

2 2.5 inH2O (6,2 mbar) 250 inH2O (0,62 bar) –250 inH2O (–0,62 bar) –250 inH2O (–0,62 bar) 

3 10 inH2O (24,9 mbar) 1000 inH2O (2,49 bar) –1000 inH2O (–2,49 bar) 0.5 psia (34,5 mbar abs) 

4 3 psi (0,20 bar) 300 psi (20,6 bar) –300 psi (–20,6 bar) 0.5 psia (34,5 mbar abs) 

5 20 psi (1,38 bar) 2000 psi (137,9 bar) NA NA 

Range 

Table 45. 2051L Range and Sensor Limits 

Range 


Lower (LRL) 

Minimum Span 

Upper (URL) 

2051L Differential 2051L Gage (1) 

2 2.5 inH2O (6,2 mbar) 250 inH2O (0,62 bar) –250 inH2O (–0,62 bar) –250 inH2O (–0,62 bar) 

3 10 inH2O (24,9 mbar) 1000 inH2O (2,49 bar) –1000 inH2O (–2,49 bar) –393 inH2O (–979 mbar) 

4 3 psi (0,207 bar) 300 psi (20,6 bar) –300 psi (–20,7 bar) –14.2 psig (–979 mbar) 

(1) Assumes atmospheric pressure of 14.7 psig. 

91


Service 

Liquid, gas, and vapor applications 

Protocols 

4–20 mA (Output Code A) 

Output 

Two-wire 4–20 mA, user-selectable for linear or square root 

output. Digital process variable superimposed on 4–20 mA signal, 

available to any host that conforms to the HART protocol. 

Power Supply 

External power supply required. Standard transmitter (4–20 mA) 

operates on 10.5 to 42.4 Vdc with no load. The 3051S ERS 

System operates on 16 - 42.4 Vdc with no load. 

Load Limitations 

Maximum loop resistance is determined by the voltage level of the 

external power supplied as described by: 

FOUNDATION fieldbus (output code F) 

Power Supply 

External power supply required; transmitters operate on 9.0 to 

32.0 Vdc transmitter terminal voltage. 

Current Draw 

17.5 mA for all configurations (including LCD display option) 

Indication 

Optional two line LCD Display 

92 

Standard HART Transmitter 

Maximum Loop Resistance = 43.5 * (Power Supply Voltage – 10.5) 

Load (Ohms) 

1387 

1000 

500 

0 

Operating 

Region 

10.5 20 30 

Voltage (Vdc) 

42.4 

The Field Communicator requires a minimum 

loop resistance of 250� for communication. 

3051S ERS System 

If supply voltage ≤ 16.74 Vdc: 

Maximum Loop Resistance = 277 * (Power Supply Voltage – 16.0) 

If supply voltage > 16.74 Vdc: 

Maximum Loop Resistance = 43.5 * (Power Supply Voltage – 12.0) 

Load (Ohms) 

1322 

Operating 

206 

Region 

0 

16 16.74 

42.4 

Voltage (Vdc) 

The Field Communicator requires a minimum 

loop resistance of 250� for communication. 


00813-0100-4016, Rev MB 


FOUNDATION fieldbus Function Block Execution Times 

Block Execution Time (Milliseconds) 

3051SAL_C 3051L 2051L 

Resource - - - 

Transducer - - - 

LCD Block - - - 

Analog Input 1, 2 20 30 35 

PID 35 (1) 45 45 

Input Selector 20 30 30 

Arithmetic 20 35 35 

Signal Characterizer 20 40 40 

Integrator 20 35 35 

Output Splitter 20 N/A N/A 

Control Selector 20 N/A N/A 

(1) PID with Auto-tune. 

FOUNDATION fieldbus Parameters 

Schedule Entries 7 (max.) 

Links 20 (max.) 

Virtual Communications Relationships (VCR) 12 (max.) 

Standard Function Blocks 

Resource Block 

Contains hardware, electronics, and diagnostic information. 

Transducer Block 

Contains actual sensor measurement data including the sensor 

diagnostics and the ability to trim the pressure sensor or recall 

factory defaults. 

LCD Block 

Configures the local display. 

2 Analog Input Blocks 

Processes the measurements for input into other function 

blocks. The output value is in engineering units or custom and 

contains a status indicating measurement quality. 

PID Block 

Contains all logic to perform PID control in the field including 

cascade and feedforward. 

Backup Link Active Scheduler (LAS) 

The transmitter can function as a Link Active Scheduler if the 

current link master device fails or is removed from the segment.


00813-0100-4016, Rev MB 


Advanced Control Function Block Suite (Option Code A01) 

Input Selector Block 

Selects between inputs and generates an output using specific 

selection strategies such as minimum, maximum, midpoint, 

average, or first “good.” 

Arithmetic Block 

Provides pre-defined application-based equations including flow 

with partial density compensation, electronic remote seals, 

hydrostatic tank gauging, ratio control, and others. 

Signal Characterizer Block 

Characterizes or approximates any function that defines an 

input/output relationship by configuring up to twenty X, Y 

coordinates. The block interpolates an output value for a given 

input value using the curve defined by the configured 

coordinates. 

Integrator Block 

Compares the integrated or accumulated value from one or two 

variables to pre-trip and trip limits and generates discrete output 

signals when the limits are reached. This block is useful for 

calculating total flow, total mass, or volume over time. 

FOUNDATION fieldbus Diagnostics Suite (Option Code D01) 

The FOUNDATION fieldbus Diagnostics provide Abnormal 

Situation Prevention (ASP) indication. The integral statistical 

process monitoring (SPM) technology calculates the mean and 

standard deviation of the process variable 22 times per second. 

The 3051S_L and 3051L use these values and highly flexible 

configuration options for customization to detect many 

user-defined or application specific abnormal situations (e.g. 

detecting plugged impulse lines and fluid composition change). 

Profibus PA (Output Code W) 

Profile Version 

3.02 

Power Supply 

External power supply required; transmitters operate on 9.0 to 

32.0 Vdc transmitter terminal voltage. 

Current Draw 

17.5 mA for all configurations (including LCD display option) 

Output Update Rate 

Four times per second 

Standard Function Blocks 

Analog Input (AI Block) 

The AI function block processes the measurements and makes 

them available to the host device. The output value from the AI 

block is in engineering units and contains a status indicating the 

quality of the measurement. 

Physical Block 

The physical block defines the physical resources of the device 

including type of memory, hardware, electronics, and diagnostic 

information. 

Transducer Block 

Contains actual sensor measurement data including the sensor 

diagnostics and the ability to trim the pressure sensor or recall 

factory defaults. 

Indication 

Optional two line LCD display 


Local Operator Interface 

Optional external configuration buttons 

3051SAL_C Wireless Self-Organizing Networks 

Output 

IEC 62591 (WirelessHART), 2.4 GHz DSSS 

Radio Frequency Power Output from Antenna 

External Antenna (WK option): Maximum of 10 mW (10 dBm) 

EIRP 

Extended Range, External Antenna (WM option): Maximum of 

18 mW (12.5 dBm) EIRP 

High-Gain, Remote Antenna (WN option): Maximum of 40 mW 

(16 dBm) EIRP 

Local Display 

The optional seven-digit LCD can display primary variable in 

engineering units, percent of range, sensor module 

temperature, and electronics temperature. Display updates at 

update rate up to once per minute. The display updates based 

on the wireless update rate. 

Update Rate 

User selectable 1 sec. to 60 min. 

Power Module 

Field replaceable, keyed connection eliminates the risk of 

incorrect installation, Intrinsically Safe Lithium-thionyl chloride 

Power Module with polybutadine terephthalate (PBT) 

enclosure. Ten-year life at one minute update rate. (1) 

(1) Reference conditions are 70 °F (21 °C), and routing data for three 

additional network devices. 

NOTE: Continuous exposure to ambient temperature limits of 

-40 °F or 185 °F (-40 °C or 85 °C) may reduce specified life by less 

than 20 percent. 

Overpressure Limits 

Limit is 0 psia to the flange rating or sensor rating, whichever is 

lower. 

Table 46. 3051L and Level Flange Rating Limits 

Standard Type CS Rating SST Rating 

ANSI/ASME Class 150 285 psig 275 psig 



At 100 °F (38 °C), the rating decreases 

with increasing temperature, per ANSI/ASME B16.5. 

DIN PN 10–40 40 bar 40 bar 

DIN PN 10/16 16 bar 16 bar 

DIN PN 25/40 40 bar 40 bar 

At 122 °F (50 °C), the rating decreases with increasing 

temperature per EN 1092-1 Annex F. 

93


Temperature Limits 

Ambient 

-40 to 185 °F (-40 to 85 °C) 

With LCD display (1) : -40 to 175 °F (-40 to 80 °C) 

With option code P0: -20 to 185 °F (-29 to 85 °C) 

Storage 

94 

(1) LCD display may not be readable and LCD updates will be slower 

at temperatures below -4 °F (-20 °C). 

-50 to 185 °F (-46 to 85 °C) 

With LCD display: -40 to 185 °F (-40 to 85 °C) 

With Wireless Output: -40 to 185 °F (-40 to 85 °C) 

Table 48. Fill Fluid Specifications 

For more information on Fill Fluids please see technical note Rosemount 1199 Fill Fluid Specifications 00840-2100-4016. 


00813-0100-4016, Rev MB 


Table 47. ERS Process Temperature Limits (Gage / Absolute Sensor) 

Coplanar Gage / Absolute Sensor In-Line Gage Sensor / Absolute Sensor 

Configuration 

(3051SAM_ _G, 3051SAM_ _A) 

(3051SAM_ _T, 3051SAM_ _E) 

Silicone Fill Fluid (1) 

- -40 to 250 °F (-40 to 121 °C) (3) 

with Coplanar Flange (1) -40 to 250 °F (-40 to 121 °C) (3) - 

with Traditional Flange (2) 

-40 to 300 °F (-40 to 149 °C) (3) - 

with Level Flange (2) -40 to 300 °F (-40 to 149 °C) (3) 

- 

with 305 Integral Manifold (1) -40 to 300 °F (-40 to 149 °C) (3) - 

Inert Fill Fluid (1)(4) 

-40 to 185 °F (-40 to 85 °C) (5) 

-22 to 250 °F (-30 to 121 °C) (3) 

(1) Process temperatures above 185 °F (85 °C) require de-rating the ambient limits by a 1.5:1 ratio. For example, for process temperature of 195 °F (91 °C), 

new ambient temperature limit is equal to 170 °F (77 °C). This can be determined as follows: (195 °F - 185 °F) x 1.5 = 15 °F, 185 °F - 15 °F = 170 °F. 

(2) Process temperatures above 185 °F (85 °C) require de-rating the ambient limits by a 1:1 ratio. 

(3) 220 °F (104 °C) limit in vacuum service; 130 °F (54 °C) for pressures below 0.5 psia. 

(4) Not available with 3051SAM_ _A. 

(5) 160 °F (71 °C) limit in vacuum service. 


Gravity 

at 77 °F 

(25 °C) 

Coeff. Of 

Therm. Exp. 

(cc/cc/°C) 

Viscosity at 

77 °F (25 °C) 

(Centistokes) 


No Extension 2-in. (50mm) 

Extension 

A Syltherm XLT 0.85 0.001199 1.6 -102 to 293 °F 

(-75 to 145 °C) 

C Silicone 704 1.07 0.00095 44 32 to 401 °F 

(0 to 205 °C) (2) 

D Silicone 200 0.93 0.00108 9.5 -49 to 401 °F 

(-45 to 205 °C) 

H Inert 

(Halocarbon) 

G (3)(4) Glycerin and 

Water 

N (4) 

1.85 0.000864 6.5 -49 to 320 °F 

(-45 to 160 °C) 

1.13 0.00034 12.5 5 to 203 °F 

(-15 to 95 °C) 

Neobee M–20 0.92 0.001008 9.8 5 to 401 °F (2) 

(-15 to 205 °C) 

P (3)(4) Proylene 1.02 0.00034 2.8 5 to 203 °F 

Glycol and 

Water 

(-15 to 95 °C) 

(1) Temperature limits are reduced in vacuum service and may be limited by seal selection. 

-102 to 293 °F 

(-75 to 145 °C) 

32 to 464 °F 

(0 to 240 °C) (2) 

-49 to 401 °F 

(-45 to 205 °C) 

-49 to 320 °F 

(-45 to 160 °C) 

5 to 203 °F 

(-15 to 95 °C) 

5 to 437 °F 

(-15 to 225 °C) 

5 to 203 °F 

(-15 to 95 °C) 

4-in. (100mm) 

Extension 

102 to 293 °F 

(-75 to 145 °C) 

32 to 500 °F 

(0 to 260 °C) (2) 

-49 to 401 °F 

(-45 to 205 °C) 

-49 to 320 °F 

(-45 to 160 °C) 

5 to 203 °F 

(-15 to 95 °C) 

5 to 437 °F 

(-15 to 225 °C) 

5 to 203 °F 

(-15 to 95 °C) 

Thermal 

Optimizer 

102 to 293 °F 

(-75 to 145 °C) 

32 to 599 °F 

(0 to 315 °C) 

-49 to 401 °F 

(-45 to 205 °C) 

-49 to 320 °F 

(-45 to 160 °C) 

5 to 203 °F 

(-15 to 95 °C) 

5 to 437 °F 

(-15 to 225 °C) 

5 to 203 °F 

(-15 to 95 °C) 

Temperature 

Limits < 1 

bar-a 

Capillary Capillary 

102 to 293 °F 

(-75 to 145 °C) 

32 to 599 °F 

(0 to 315 °C) 

-49 to 401 °F 

(-45 to 205 °C) 

-49 to 320 °F 

(-45 to 160 °C) 

5 to 203 °F 

(-15 to 95 °C) 

5 to 437 °F 

(-15 to 225 °C) 

5 to 203 °F 

(-15 to 95 °C) 

(2) Maximum process temperature is limited by heat transfer to the transmitter electronics and must be further derated if ambient temperatures exceed 70°F (21°C). 



— 

32 to 392 °F 

(0 to 200 °C) 

-49 to 212 °F 

(-45 to 100 °C) 

-49 to 176 °F 

(-45 to 80 °C) 

— 

5 to 248 °F 

(-15 to 120 °C) 

—


00813-0100-4016, Rev MB 


Figure 1. Thermal Optimizer with Silicone 704 Fill Fluid Temperature Limits 

Humidity Limits 

0–100% relative humidity 


Turn-On Time 

3051SAL_C Performance within specifications less than 2.0 seconds after power is applied to the transmitter. 

3051L Performance within specifications less than 2.0 seconds (10.0 s for Profibus protocol) after power is applied to the transmitter 

2051L Performance within specifications less than 2.0 seconds after power is applied to the transmitter. 

ERS 

System: 

Performance within specifications less than 6.0 seconds after power is applied. 

Volumetric Displacement 

Less than 0.005 in3 (0.08 cm3 ) 

Damping (1) 

Software damping is in addition to sensor module response time. 

3051SAL_C Analog output response to a step change is user-selectable from 0 to 60 seconds for one time constant. 

3051L Analog output response to a step input change is user-selectable from 0 to 36 seconds for one time constant. 

2051L Analog output response to a step input change is user-selectable from 0 to 25.6 seconds for one time constant. 

ERS 

System: 

The PHI and PLO Pressure measurements and the DP calculation may be independently dampened from 0 – 60 seconds for 

one time constant. 

(1) Does not apply to wireless option code X. 

95


Physical Specifications 

Electrical Connections 

1 /2–14 NPT, PG 13.5, G 1 /2, and M20 × 1.5 conduit. HART interface 

connections fixed to terminal block. 

Non-Wetted Parts 

Capillary Armor is SST. 

96 

Electrical Housing 

Coplanar Sensor Module 

Housing 

Bolts 

Sensor Module Fill Fluid 

Process Fill Fluid 


00813-0100-4016, Rev MB 


3051SAL 3051L 2051L 

Low-copper aluminum alloy or 

CF-8M (Cast 316 SST) 

NEMA 4X, IP 66, IP 68 (66 ft (20 

m) for 168 hours) 

Note: IP 68 not available with 

Wireless Output. 

CF-3M (Cast version of 316L 

SST, material per ASTM-A743) 

Plated carbon steel per ASTM 

A449, Type 1 

Austenitic 316 SST per ASTM 

F593 

ASTM A453, Class D, Grade 660 

SST 

ASTM A193, Grade B7M alloy 

steel 

ASTM A193, Class 2, Grade 

B8M SST 

Alloy K-500 

Silicone or inert halocarbon (Inert 

is not available with 3051S_CA). 

In-Line series uses Fluorinert ® 

FC-43. 

Syltherm XLT, Silicone 704, 

Silicone 200, inert, glycerin and 

water, 

Neobee M-20, propylene glycol 

and water. 

Low-copper aluminum or CF-3M 

(Cast version of 316L SST, 

material per ASTM-A743). NEMA 

4X, IP 65, IP 66 



ASTM A449, Type 1 (zinc-cobalt 

plated carbon steel) 

ASTM F593G, Condition CW1 

(Austenitic 316 SST) 

ASTM A193, Grade B7M (zinc 

plated alloy steel) 

Alloy K-500 

Silicone 200 or Fluorocarbon oil 

(Halocarbon or Fluorinert ® FC-43 

for 3051T) 



water, Neobee M-20 or propylene 

glycol and water 

Paint for Aluminum Housing Polyurethane Polyurethane Polyurethane 

Low-copper aluminum or CF-8M 

(Cast version of 316 SST). 

Enclosure Type 4X, IP 65, IP 66, 

IP 68 



ASTM A449, Type 1 (zinc-cobalt 

plated carbon steel) 

ASTM F593G, Condition CW1 

(Austenitic 316 SST) 

ASTM A193, Grade B7M (zinc 

plated alloy steel) 

Silicone 200 or Fluorocarbon oil 

(Halocarbon or Fluorinert ® FC-43 

for 2051T) 



water, Neobee M-20 or propylene 

glycol and water 

Cover O-ring Nitrile butadiene (NBR) Nitrile butadiene (NBR) Nitrile butadiene (NBR) 

Wireless Antenna 

External Antenna (WK1 / WM1): 

PBT/ PC integrated 

omnidirectional antenna 

Remote Antenna (WN1): 

Fiberglass omnidirectional 

antenna 

N/A N/A 

Power Module 

Field replaceable, keyed 

connection eliminates the risk of 

incorrect installation, Intrinsically 

Safe Lithium-thionyl chloride 

Power Module with PBT 

enclosure 

N/A N/A


00813-0100-4016, Rev MB 


NOTE 

If a lower housing is supplied, then the following 

gaskets are the default gaskets for each seal. 

Wetted Materials 

Seal Gaskets 

FFW ThermoTork TN-9000 gasket 

FCW No gasket is supplied 

FUW No gasket is supplied 

FVW No gasket is supplied 

RCW C-4401 gasket 

RFW C-4401 gasket 

RTW C-4401 gasket 

PFW ThermoTork TN-9000 gasket 

PCW No gasket is supplied 

Transmitter flange is CF-3M (Cast version of 316L SST, material per ASTM-A743) 

Shipping Weights 

Table 49. 3051SAL Weights Without SuperModule Platform, Housing, or Transmitter Options 

Flange Flush 

lb. (kg) 

2-in. Ext. 

lb (kg) 

4-in. Ext. 

lb (kg) 


6-in. Ext. 

lb (kg) 

2-in., 150 9.5 (4,3) — — — 

3-in., 150 15.7 (7,1) 16.4 (7,4) 17.6 (8,0) 18.9 (8,6) 

4-in., 150 21.2 (9,6) 20.9 (9,5) 22.1 (10,0) 23.4 (10,6) 

2-in., 300 11.3 (5,1) — — — 

3-in., 300 19.6 (8,9) 20.3 (9,2) 21.5 (9,8) 22.8 (10,3) 

4-in., 300 30.4 (13.8) 30.3 (13,7) 31.5 (14,3) 32.8 (14,9) 

2-in., 600 12.8 (5,8) — — — 

3-in., 600 22.1 (10,0) 22.8 (10,3) 24.0 (10,9) 25.3 (11,5) 

DN 50 / PN 40 11.3 (5,1) — — — 

DN 80 / PN 40 16.0 (7,3) 16.7 (7,6) 17.9 (8,1) 19.2 (8,7) 

DN 100 / PN 10/16 11.2 (5,1) 11.9 (5,4) 13.1 (5,9) 14.4 (6,5) 

DN 100 / PN 40 12.6 (5,7) 13.3 (6,0) 14.5 (6,6) 15.8 (7,1) 

Table 50. 3051SAM and 3051SAL Transmitter Option Weights 

Option Code Option Add lb (kg) 

1J, 1K, 1L SST PlantWeb Housing 3.5 (1,6) 

2J SST Junction Box Housing 3.4 (1,5) 

7J SST Quick Connect 0.4 (0,2) 

2A, 2B, 2C Aluminum Junction Box Housing 1.1 (0,5) 

1A, 1B, 1C Aluminum PlantWeb Housing 1.1 (0,5) 

M5 LCD Display for Aluminum PlantWeb Housing (1) , 

LCD Display for SST PlantWeb Housing (1) 

0.8 (0,4) 

1.6 (0,7) 

Aluminum Standard Cover 0.4 (0,2) 

SST Standard Cover 1.3 (0,6) 

Aluminum Display Cover 0.7 (0,3) 

SST Display Cover 1.5 (0,7) 

Wireless Extended Cover 0.7 (0,3) 

LCD Display (2) 

0.1 (0,04) 

Junction Box Terminal Block 0.2 (0,1) 

PlantWeb Terminal Block 0.2 (0,1) 

Power Module 0.5 (0,2) 

(1) Includes LCD display and display cover. 

(2) Display only. 

97


Table 51. 3051L Weights without Options 

98 

Flange 

Flush 

lb. (kg) 

2-in. Ext. 

lb (kg) 

4-in. Ext. 

lb (kg) 

6-in. Ext. 

lb (kg) 

2-in., 150 12.5 (5,7) — — — 

3-in., 150 17.5 (7,9) 19.5 (8,8) 20.5 (9,3) 21.5 (9,7) 

4-in., 150 23.5 (10,7) 26.5 (12,0) 28.5 (12,9) 30.5 (13,8) 

2-in., 300 17.5 (7,9) — — — 

3-in., 300 22.5 (10,2) 24.5 (11,1) 25.5 (11,6) 26.5 (12,0) 

4-in., 300 32.5 (14,7) 35.5 (16,1) 37.5 (17,0) 39.5 (17,9) 

2-in., 600 15.3 (6,9) — — — 

3-in., 600 25.2 (11,4) 27.2 (12,3) 28.2 (12,8) 29.2 (13,2) 

DN 50/PN 40 13.8 (6,2) — — — 

DN 80/PN 40 19.5 (8,8) 21.5 (9,7) 22.5 (10,2) 23.5 (10,6) 

DN 100/ 

PN 10/16 

17.8 (8,1) 19.8 (9,0) 20.8 (9,5) 21.8 (9,9) 

DN 100/ 

PN 40 

23.2 (10,5) 25.2 (11,5) 26.2 (11,9) 27.2 (12,3) 

Table 52. 3051L Transmitter Options Weights 

Option Add 

Code 

lb (kg) 

J, K, L, M Stainless Steel Housing (T) 3.9 (1,8) 

J, K, L, M Stainless Steel Housing (C, L, H, P) 3.1 (1,4) 

M5 LCD display for Aluminum Housing 0.5 (0,2) 

M6 LCD display for SST Housing 1.25 (0,6) 

Table 53. 2051L Weights without Options 

Flange 

Flush 

lb. (kg) 

2-in. Ext. 

lb (kg) 

4-in. Ext. 

lb (kg) 

6-in. Ext. 

lb (kg) 

2-in., 150 12.5 (5,7) — — — 

3-in., 150 17.5 (7,9) 19.5 (8,8) 20.5 (9,3) 21.5 (9,7) 

4-in., 150 23.5 (10,7) 26.5 (12,0) 28.5 (12,9) 30.5 (13,8) 

2-in., 300 17.5 (7,9) — — — 

3-in., 300 22.5 (10,2) 24.5 (11,1) 25.5 (11,6) 26.5 (12,0) 

4-in., 300 32.5 (14,7) 35.5 (16,1) 37.5 (17,0) 39.5 (17,9) 

DN 50/PN 40 13.8 (6,2) — — — 

DN 80/PN 40 19.5 (8,8) 21.5 (9,7) 22.5 (10,2) 23.5 (10,6) 

DN 100/ 

PN 10/16 

17.8 (8,1) 19.8 (9,0) 20.8 (9,5) 21.8 (9,9) 

DN 100/ 

PN 40 

23.2 (10,5) 25.2 (11,5) 26.2 (11,9) 27.2 (12,3) 

Table 54. 2051L Transmitter Options Weights 

Option Add 

Code 

lb (kg) 

J, K, L, M Stainless Steel Housing 3.9 (1,8) 

M5 LCD display for Aluminum Housing 0.5 (0,2) 


00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 


SEAL SPECIFICATIONS 

Functional Specifications 

Hygienic Seal Approvals 

Hygienic Seals: Tri-Clamp, tank spud, thin wall tank spud, 

Tri-Clamp inline, and Cherry Burrell “I” line seal conform to 3-A 

Hygienic Standards for Sensor and Sensor Fittings and 

Connections used on Milk and Milk Product Equipment, Number 

74-03. 

Hygienic Fill Fluids: The hygienic fill fluids glycerin & water and 

Propylene Glycol & water meet United States Pharmacopeia 

(USP) and Food Chemical Codex (FCC) requirements and is 

Generally Recognized as Safe (GRAS) in accordance with the 

FDA Code of Federal Regulations Title 21. The hygienic fill fluid 

Neobee M-20 is approved under 21CFR 172.856 as a direct food 

additive and under 21 CFR 174.5 as an indirect food additive. 

Hygienic O-rings: The EPDM, Fluorocarbon (FMK), and Nitrile 

butadiene (NBR) O-rings for the SSW Tank Spud Seal meet 3-A 

Hygienic Standard Number 18 Class 1 requirements. The EPDM 

O-ring also meets USP class VI approval requirements. 

Surface Finish Certification (Q16 Option) 

When ordering the Q16 option in the pressure transmitter model 

number, the surface finish of the seal diaphragm is certified per 

BPE 2002 requirements. This surface finish certification is 

available for Tri-Clamp, Tri-Clamp Inline, Tank Spud, and Thin Wall 

Tank Spud seal types. 

NACE Standard (T Option) 

NACE (National Association of Corrosion Engineers) standard 

MR0175/ISO 15156 defines metallic material requirements for 

resistance to sulfide stress cracking when applied on petroleum 

production, drilling, gathering and flow line equipment, and field 

processing facilities to be used in H2S bearing hydrocarbon 

service. MR0103 provides material requirements exclusive to sour 

petroleum refining environments. Compliance guidelines are 

intended to include “wetted” materials as recommended by both 

NACE standards. The option code T in several of the general 

purpose seal types limits the wetted material offering. 

Metallurgical requirements for alloys used are virtually identical for 

the two standards, but application conditions enforced are different 

and can limit material acceptance. Contact an Emerson Process 

Management representative to aid in selecting the proper 

materials to meet the NACE standard. 

Material Traceability (Q8 Option) 

Material traceability is provided for the seal, upper housing, and if 

applicable, lower housing/flushing connection or diaphragm 

extension, upon selecting the option code Q8 in the pressure 

transmitter model number. Material traceability for the 

transmitter/seal system is provided per the DIN EN10204 3.1 

standard, and is only available for general purpose seal types. 


Performance Specifications 

Instrument Toolkit calculates the remote seal system performance 

and validates model number configuration. 

Remote Seal System Performance Calculation 

Report (QZ Option) 

When the QZ option code is specified within the pressure 

transmitter model structure, Emerson will generate a remote seal 

system calculation report for the given application. This report 

quantifies all aspects of remote seal system performance including 

seal temperature effects, head temperature effects, seal response 

time, and transmitter total probable error. 

Physical Specifications 

Material of Construction 

Remote seal materials of construction (diaphragm, upper housing, 

flange, lower housing/flushing connection, bolts, and 

gaskets/O-rings) are listed for each remote seal type. Fill fluids 

specifications are listed in Table 48. 

Tagging 

The 1199 remote seal model number is marked on the transmitter 

nameplate (neck or top label). The pressure transmitter will be 

tagged in accordance with customer requirements. The standard 

stainless steel tag is wired to the transmitter. Tag is 0.02-in. (0.051 

cm) thick with 0.125-in. (0.318 cm) high letters. A permanently 

attached tag is available upon request. 

Calibration 

Transmitters are factory calibrated to customer’s specified range. 

If calibration is not specified, then the transmitters are calibrated at 

maximum range. Calibration is performed at ambient temperature 

and pressure. 

Custom Configurations 

Rosemount 3051S, 3051, and 2051 (Option 

Code C1) 

If code C1 is ordered, the customer may specify the following 

data in addition to the standard configuration parameters. 

Refer to the respective configuration data sheet within the 

device PDS. 

Descriptor: 16 alphanumeric characters. 

Message: 32 alphanumeric characters. 

Date: Day, month, year. 

Damping: Sec. 

99


100 


00813-0100-4016, Rev MB 


Rosemount 3051S Liquid Level Certifications 

Approved Manufacturing Locations 

Rosemount Inc. — Chanhassen, Minnesota USA 

Emerson Process Management GmbH & Co. — Wessling, 

Germany 

Emerson Process Management Asia Pacific Private Limited — 

Singapore 

Beijing Rosemount Far East Instrument Co., LTD — Beijing, China 

Emerson Process Management LTDA — Sorocaba, Brazil 

Emerson Process Management (India) Pvt. Ltd. — Mumbai, India 

Emerson Process Management, Emerson FZE — Dubai, United 

Arab Emirates 

Ordinary Location Certification for FM 

As standard, the transmitter has been examined and tested to 

determine that the design meets basic electrical, mechanical, and 

fire protection requirements by FM, a nationally recognized testing 

laboratory (NRTL) as accredited by the Federal Occupational 

Safety and Health Administration (OSHA). 

European Directive Information 

The EC declaration of conformity for all applicable European 

directives for this product can be found at www.rosemount.com. A 

hard copy may be obtained by contacting an Emerson Process 

Management representative. 

ATEX Directive (94/9/EC) 

Emerson Process Management complies with the 

ATEX Directive. 

European Pressure Equipment Directive (PED) (97/23/EC) 

Models 3051S_CA4; 3051S_CD2, 3, 4, 5; (also with P9 option) 

Pressure Transmitters — QS Certificate of Assessment - 

EC No. 59552-2009-CE-HOU-DNV, Module H Conformity 

Assessment 

All other Model 3051S Pressure Transmitters 

— Sound Engineering Practice 

Transmitter Attachments: Diaphragm Seal - Process Flange - 

Manifold — Sound Engineering Practice 

Primary Elements, Flowmeter 

— See appropriate Primary Element QIG 

Electro Magnetic Compatibility (EMC) (2004/108/EC) 

EN 61326-1:2006 

EN 61326-2-3:2006 

HART & FOUNDATION Fieldbus 

Hazardous Locations Certifications 

North American Certifications 

FM Approvals 

E5 Explosion-proof for Class I, Division 1, Groups B, C, and D, 

T5 (Ta = 85 °C); Dust Ignition-proof for Class II and Class III, 

Division 1, Groups E, F, and G, T5 (Ta = 85 °C); hazardous 

locations; enclosure Type 4X, conduit seal not required 

when installed according to Rosemount drawing 

03151-1003. 

I5/IE Intrinsically Safe for use in Class I, Division 1, Groups A, B, 

C, and D, T4 (Ta = 70 °C for output options A or X; Ta = 60 

°C for output option F or W); Class II, Division 1, Groups E, 

F, and G; Class III, Division 1; Class I, Zone 0 AEx ia IIC T4 

(Ta = 70 °C for output options A or X; Ta = 60 °C for output 

option F or W) when connected in accordance with 

Rosemount drawing 03151-1006; Non-Incendive for Class I, 

Division 2, Groups A, B, C, and D; T4 (Ta = 70 °C for output 

options A or X; 

Ta = 60 °C for output option F or W) Enclosure Type 4X 

For entity parameters see control drawing 03151-1006. 

Canadian Standards Association (CSA) 

All CSA hazardous approved transmitters are certified per 

ANSI/ISA 12.27.01-2003. 

E6 Explosion-proof for Class I, Division 1, Groups B, C, and D; 

Dust Ignition-proof for Class II and Class III, Division 1, 

Groups E, F, and G; suitable for Class I, Division 2, Groups 

A, B, C, and D, when installed per Rosemount drawing 

03151-1013, CSA Enclosure Type 4X; conduit seal not 

required; Dual Seal. 

I6/IF Intrinsically Safe for Class I, Division 1, Groups A, B, C, and 

D when connected in accordance with Rosemount drawings 

03151-1016; Dual Seal. 

For entity parameters see control drawing 03151-1016.


00813-0100-4016, Rev MB 


European Certifications 

I1/IA ATEX Intrinsic Safety 

Certificate No.: BAS01ATEX1303X II 1G 

Ex ia IIC T4 (Ta = -60 °C to 70 °C) -HART/Remote 

Display/Quick Connect/HART Diagnostics 

Ex ia IIC T4 (Ta = -60 °C to 70 °C) -FOUNDATION fieldbus 

Ex ia IIC T4 (Ta = -60 °C to 40 °C) -FISCO 

1180 

Input Parameters 

Loop / Groups 

Power 

Ui = 30 V HART / FOUNDATION fieldbus/ Remote Display / 

Quick Connect / HART Diagnostics 

Ui = 17.5 V FISCO 

Ii = 300 mA HART / FOUNDATION fieldbus/ Remote Display / 


Ii = 380 mA FISCO 

Pi = 1.0 W HART / Remote Display / Quick Connect / 

HART Diagnostics 

Pi = 1.3 W FOUNDATION fieldbus 

Pi = 5.32 W FISCO 

Ci = 30 nF SuperModule Platform 

Ci = 11.4 nF HART / HART Diagnostics / Quick Connect 

Ci = 0 FOUNDATION fieldbus / Remote Display / FISCO 

Li = 0 HART / FOUNDATION fieldbus/ FISCO / Quick 

Connect / HART Diagnostics 

Li = 60 µH Remote Display 

RTD Assembly (3051SFx Option T or R) 

Ui = 5 Vdc 

Ii = 500 mA 

Pi = 0.63 W 

Special conditions for safe use (x) 

1. The apparatus, excluding the Types 3051 S-T and 3051 

S-C (In-line and Coplanar SuperModule Platforms 

respectively), is not capable of withstanding the 500 V test 

as defined in Clause 6.3.12 of EN 60079-11. This must be 

considered during installation. 

2. The terminal pins of the Types 3051 S-T and 3051 S-C 

must be protected to IP20 minimum. 

N1 ATEX Type n 

Certificate No.: BAS01ATEX3304X II 3 G 

Ex nL IIC T4 (Ta = -40 °C TO 70 °C) 

Ui = 45 Vdc max 

Ci = 11.4 nF (Transmitter Output Option A) 

Ci = 0 (Transmitter Output Option F) 

Li = 0 

For remote display, Ci = 0, Li = 60 μH 

IP66 


The apparatus is not capable of withstanding the 500 V 

insulation test required by Clause 6.8.1 of EN 60079-15. 

This must be taken into account when installing the apparatus. 

NOTE 

RTD Assembly is not included with the 3051SFx Type n Approval. 


ND ATEX Dust 

Certificate No.: BAS01ATEX1374X II 1 D 

Ex tD A20 IP66 T105°C (-20 °C � Tamb � 85 °C) 

Vmax = 42.4 volts max 

IP66 

1180 


1. Cable entries must be used which maintain the ingress 

protection of the enclosure to at least IP66. 

2. Unused cable entries must be filled with suitable blanking 

plugs which maintain the ingress protection of the 

enclosure to at least IP66. 

3. Cable entries and blanking plugs must be suitable for the 

ambient range of the apparatus and capable of 

withstanding a 7J impact test. 

4. The 3051S SuperModule must be securely screwed in 

place to maintain the ingress protection of the enclosure. 

(The 3051S SuperModule must be properly assembled to 

the 3051S housing to maintain ingress protection.) 

E1 ATEX Flameproof 

Certificate No.: KEMA00ATEX2143X II 1/2 G 

Ex d IIC T6 (-50 °C � Tamb � 65 °C) 


Vmax = 42.4 V 

1180 


1. The Ex d blanking elements, cable glands, and wiring 

shall be suitable for a temperature of 90 °C. 

2. The 3051S SuperModule contains a thin wall diaphragm. 

Installation, maintenance and use shall take into account 

the environmental conditions to which the diaphragm will 

be subjected. The manufacturer's instructions for 

maintenance shall be followed in detail to assure safety 

during its expected lifetime. 

3. In case of repair, contact the manufacturer for information 

on the dimensions of the flameproof joints. 

Japanese Certifications 

E4 TIIS Flameproof 

Ex d IIC T6 

Certificate Description 

TC15682 Coplanar with Junction Box Housing 

TC15683 Coplanar with PlantWeb Housing 

TC15684 Coplanar with PlantWeb Housing 

and LCD Display 

TC15685 In-Line SST with Junction Box Housing 

TC15686 In-Line Alloy C-276 with Junction Box Housing 

TC15687 In-Line SST with PlantWeb Housing 

TC15688 In-Line Alloy C-276 with PlantWeb Housing 

TC15689 In-Line SST with PlantWeb Housing 


TC15690 In-Line Alloy C-276 with PlantWeb Housing 


TC17102 Remote Display 

TC17099 3051SFA/C/P SST/Alloy C-276 with 

PlantWeb Housing and LCD Display 


Junction Box Housing 


PlantWeb Housing and Remote Display 

101


China Certifications 

E3 China Flameproof, Dust Ignition-proof 

NEPSI Certificate No. (manufactured in Chanhassen, MN): 

GYJ091035 

Certificate No. (manufactured in Beijing, China and 

Singapore): GYJ111400X 

Certificate No. (3051SFx RTC, BMMC, SMMC): GYJ071086 

Ex d IIC T5/T6 

DIP A20 Ta 105C IP66 

NOTE 

Refer to Appendix B of the 3051S Reference Manual (document 

number 00809-0100-4801) for Special Conditions for Safe Use. 

I3 China Intrinsic Safety, Dust Ignition-proof 

NEPSI Certificate No. (manufactured in Chanhassen, MN): 

GYJ081078 

Certificate No. (manufactured in Beijing, China and 

Singapore): GYJ111401X 

Certificate No. (3051SFx RTC, BMMC, SMMC): GYJ071293 

Ex ia IIC T4 

DIP A21 T A T4 IP66 

NOTE 




Loop / 

Power 

Groups 

Ui = 30 V HART / FOUNDATION fieldbus / Remote Display / 


Ii = 300 mA HART / FOUNDATION fieldbus / Remote Display / 


Pi = 1.0 W HART / Remote Display / Quick Connect / 

HART Diagnostics 



Ci = 11.4 nF HART / HART Diagnostics / Quick Connect 

Ci = 0 FOUNDATION fieldbus / Remote Display 

Li = 0 SuperModule Platform / FOUNDATION fieldbus 

Li = 2.4 µH HART / Quick Connect / HART Diagnostics 

Li = 58.2 µH Remote Display 


U i = 5 Vdc 

I i = 500 mA 

P i = 0.63 W 

102 

N3 China Type n - Energy Limited 

NEPSI Certificate No.: GYJ101112X 

Ex nL IIC T5 (-40 °C ≤ Ta ≤ 70 °C) 

IP66 

Loop / 

Power 


Ui = 30 V HART / FOUNDATION fieldbus 

Ii = 300 mA HART / FOUNDATION fieldbus 

Pi = 1.0 W HART 


Ci = 11.4 nF HART 

Ci = 0 nF FOUNDATION fieldbus 

Li = 0 µH HART (1) / FOUNDATION fieldbus 


00813-0100-4016, Rev MB 


(1) For remote meter option (M7, M8, M9), L i = 60 µH. 

NOTE 



Brazil Certifications 

I2 INMETRO Intrinsic Safety 

Certificate number: CEPEL-EX-0722/05X 

(manufacturing in Chanhassen, MN and Singapore) 


(manufacturing in Brazil) 

INMETRO Marking: BR-Ex ia IIC T4 IP66W 


The apparatus, excluding the Types 3051S-T and 3051S-C 

(In-line and Coplanar SuperModule Platforms respectively), 

is not capable of withstanding the 500 V test as defined in 

Clause 6.3.12 of IEC60079-11. This must be considered 

during installation. 

E2 INMETRO Flameproof 


(manufacturing in Chanhassen, MN and Singapore) 


(manufacturing in Brazil) 

INMETRO Marking: BR-Ex d IIC T5/T6 IP66W 


1. This device contains a thin wall diaphragm. Installation, 

maintenance, and use shall take into account the 

environmental conditions to which the diaphragm will be 

subjected. The manufacturer’s instructions for installation 

and maintenance shall be followed in detail to assure 

safety during its expected lifetime. 

2. For ambient temperature above 60 ºC, cable wiring must 

have minimum isolation temperature of 90 ºC, to be in 

accordance to equipment operation temperature. 

3. The accessory of cable entries or conduit must be 

certified as flameproof and needs to be suitable for use 

conditions. 

4. Where electrical entry is via conduit, the required sealing 

device must be assembled immediately close to 

enclosure.


00813-0100-4016, Rev MB 


IECEx Certifications 

E7 IECEx Flameproof and Dust (each listed separately) 

IECEx Flameproof 

Certificate No.: IECExKEM08.0010X 

Ex d IIC T5 or T6 Ga/Gb 

T6 (-50 °C � Tamb � 65 °C) 

T5 (-50 °C � Tamb � 80 °C) 

Vmax = 42.4 V 


1. The Ex d blanking elements, cable glands, and wiring 


2. The 3051S SuperModule contains a thin wall diaphragm. 

Installation, maintenance, and use shall take into account 







IECEx Dust 

Certificate No. IECExBAS09.0014X 

Ex tD A20 IP66 T105 °C (-20 °C ≤ Ta ≤ 85 °C) 

Vmax = 42.4 V 

A = 22 mA 

IP66 










4. The 3051S SuperModule must be securely screwed in 


(The 3051S SuperModule must be properly assembled to 

the 3051S housing to maintain ingress protection.) 

I7/IG IECEx Intrinsic Safety 

Certificate No.: IECExBAS04.0017X 



Ex ia IIC T4 (Ta = -60 °C to 70 °C) -FOUNDATION fieldbus 

Ex ia IIC T4 (Ta = -60 °C to 40 °C) -FISCO 

IP66 


Loop / Power Groups 


Ui = 30 V HART / FOUNDATION fieldbus/ Remote 

Display / Quick Connect / HART 

Diagnostics 

Ui = 17.5 V FISCO 

Ii = 300 mA HART / FOUNDATION fieldbus/ Remote 

Display / Quick Connect / HART 

Diagnostics 

Ii = 380 mA FISCO 

Pi = 1.0 W HART / Remote Display / Quick 

Connect / HART Diagnostics 


Pi = 5.32 W FISCO 


Ci = 11.4 nF HART / HART Diagnostics / Quick 

Connect 

Ci = 0 FOUNDATION fieldbus / Remote Display / 

FISCO 

Li = 0 HART / FOUNDATION fieldbus/ FISCO / 


Li = 60�H Remote Display 


Ui = 5 Vdc 

Ii = 500 mA 

Pi = 0.63 W 


1. The 3051S HART 4-20 mA, 3051S FOUNDATION fieldbus, 

and 3051S FISCO are not capable of withstanding the 500 

V test as defined in clause 6.3.12 of IEC 60079-11. This 

must be taken into account during installation. 

2. The terminal pins of the Types 3051S-T and 3051S-C must 

be protected to IP20 minimum. 

N7 IECEx Type n 


Ex nC IIC T4 (-40 °C ≤ Ta ≤ +70 °C) 

Ui = 45 Vdc Max 

IP66 



insulation test required by Clause 8 of IEC 60079-15:1987. 

Combinations of Certifications 

Stainless steel certification tag is provided when optional approval 

is specified. Once a device labeled with multiple approval types is 

installed, it should not be reinstalled using any other approval 

types. Permanently mark the approval label to distinguish it from 

unused approval types. 

K1 Combination of E1, I1, N1, and ND 

K2 Combination of E2 and I2 



K7 Combination of E7, I7, and N7 

KA Combination of E1, I1, E6, and I6 

KB Combination of E5, I5, I6, and E6 

KC Combination of E5, E1, I5, and I1 

KD Combination of E5, I5, E6, I6, E1, and I1 

103


104 

3051S ERS System Certifications 


Rosemount Inc. – Chanhassen, Minnesota, USA 

Emerson Process Management GmbH & Co. – Wessling, 

Germany 

Emerson Process Management Asia Pacific Private Limited – 

Singapore 

Beijing Rosemount Far East Instrument Co., LTD – Beijing, China 

Ordinary Location Certification for FM 

Approvals 


determine that the design meets basic electrical, mechanical, and 

fire protection requirements by FM, a nationally recognized testing 

laboratory (NRTL) as accredited by the Federal Occupational 

Safety and Health Administration (OSHA). 



directives for this product can be found at www.rosemount.com. A 

hard copy may be obtained by contacting an Emerson Process 

Management representative. 


Emerson Process Management complies with the 

ATEX Directive. 


Models 3051S_CA4; 3051S_CD2, 3, 4, 5; (also with P9 option) 

Pressure Transmitters — QS Certificate of Assessment - 

EC No. 59552-2009-CE-HOU-DNV, Module H Conformity 

Assessment 

All other Model 3051S Pressure Transmitters 


Transmitter Attachments: Diaphragm Seal - Process Flange - 

Manifold — Sound Engineering Practice 

Primary Elements, Flowmeter 

— See appropriate Primary Element QIG 


EN 61326-1:2006 

EN 61326-2-3:2006 



FM Approvals 


Dust Ignition-proof for Class II and Class III, Division 1, 

Groups E, F, and G; hazardous locations; enclosure Type 

4X, conduit seal not required. 

I5 Intrinsically Safe for use in Class I, Division 1, Groups A, B, 

C, and D; Class II, Division 1, Groups E, F, and G; Class III, 

Division 1; Class I, Zone 0 AEx ia IIC when connected in 

accordance with Rosemount drawing 03151-1306; 

Non-Incendive for Class I, Division 2, Groups A, B, C, and D 

Enclosure Type 4X 



00813-0100-4016, Rev MB 




ANSI/ISA 12.27.01-2003. 


Dust Ignition-Proof for Class II and Class III, Division 1, 

Groups E, F, and G; suitable for Class I, Division 2, Groups 

A, B, C, and D, CSA Enclosure Type 4X; conduit seal not 

required; Dual Seal. 

I6 Intrinsically Safe for Class I, Division 1, Groups A, B, C, and 

D when connected in accordance with Rosemount Drawings 

03151-1316; Dual Seal. 



I1 ATEX Intrinsic Safety 

Certificate No.: BAS01ATEX1303X II 1G 

Ex ia IIC T4 (Ta = -60 °C to 70 °C) 

1180 

Table 55. Input Parameters 

Loop / Power 

Ui = 30 V 

Ii = 300 mA 

Pi = 1 W 

Ci = 12 nF 

Li = 33 � 

H 

Special Conditions for Safe Use (X) 

The apparatus is not capable of withstanding the 500 V test 

as defined in Clause 6.3.12 of EN 60079-11. This must be 

considered during installation. 


Certificate No.: BAS01ATEX3304X II 3 G 

Ex nL IIC T4 (Ta = -40 °C TO 70 °C) 


IP66 



insulation test required by Clause 6.8.1 of EN 60079-15. 

This must be taken into account when installing the apparatus.


00813-0100-4016, Rev MB 


ND ATEX Dust 

Certificate No.: BAS01ATEX1374X II 1 D 

Ex tD A20 IP66 T105 °C (-20 °C � Tamb � 85 °C) 

Vmax = 42.4 V max 

IP66 

1180 

Special Conditions for safe use (X): 



2. Unused cable entries must be filled suitable blanking 






4. Each 3051S ERS transmitter must be securely screwed 

in place to maintain the ingress protection of the 

enclosure. (The 3051S Super Module must be properly 

assembled to the 3051S housing to maintain ingress 

protection.) 

E1 ATEX Flameproof 

Certificate No.: KEMA00ATEX2143X II 1/2 G 



Vmax = 42.4 V 

1180 

Special Conditions for safe use (X): 

1. The Ex d blanking elements, cable glands and wiring 


2. Transmitter Model 3051S contains a thin wall diaphragm. 









E4 TIIS Flameproof: Consult factory for availability 

INMETRO Certifications 

E2 INMETRO Flameproof: Consult factory for availability 

I2 INMETRO Intrinsic Safety: Consult factory for availability 

China Certifications 

E3 China Flameproof, Dust Ignition-proof 

NEPSI Certificate No. (manufactured in Beijing, China): 

GYJ101345X 

Ex d II CT5/T6 

T5 (-50 °C � T a � 80 °C) 

T6 (-50 °C � T a � 65 °C) 

NOTE 

Refer to Appendix B of the 3051S ERS Reference Manual 

(document number 00809-0100-4804) for Special Conditions for 

Safe Use. 


I3 China Intrinsic Safety, Dust Ignition-proof 

NEPSI Certificate No. (manufactured in Beijing, China): 

GYJ111265X 

Ex ia IIC T4 

Maximum 

input 

voltage: 

U i (V) 

Maximum 

input 

current: 

I i (mA) 

Maximum 

input 

power: 

P i (W) 

Maximum internal 

parameters: 

Ci (nF) Li ( � H) 

30 300 1 12 33 

NOTE 

Refer to Appendix B of the 3051S ERS Reference Manual 

(document number 00809-0100-4804) for Special Conditions for 

Safe Use. 


I7 IECEx Intrinsic Safety 




IP66 


Loop / Power 

Ui = 30 V 

Ii = 300 mA 

Pi = 1 W 

Ci = 12 nF 

Li = 33 � 

H 

Special conditions for safe use (X) 

The apparatus is not capable of withstanding the 500 V test 

as defined in clause 6.3.12 of IEC 60079-11. This must be 

taken into account during installation. 



Ex nC IIC T4 (-40 °C ≤ T a ≤ +70 °C) 

U i = 45 Vdc Max 

IP66 



insulation test required by Clause 8 of IEC 60079-15:1987. 

105


E7 IECEx Flameproof and Dust (each listed separately) 

IECEx Flameproof 

Certificate No.: IECExKEM08.0010X 



Vmax = 42.4 V 

Special conditions for safe use (X) 

1. The Ex d blanking elements, cable glands and wiring 


2. Transmitter Model 3051S contains a thin wall diaphragm. 








106 

IECEx Dust 

Certificate No. IECExBAS09.0014X 

Ex tD A20 IP66 T105°C (-20 °C ≤ T amb ≤ 85 °C) 

Vmax = 42.4 V 

A = 22 mA 

IP66 










4. Each 3051S ERS sensor must be securely screwed in 


(Each sensor module must be properly assembled to the 

housing to maintain ingress protection.) 







K1 Combination of E1, I1, N1, and ND 




K7 Combination of E7, I7, and N7 

KA Combination of E1, E6, I1, and I6 

KB Combination of E5, E6, I1, and I6 

KC Combination of E5, E1, I5, and I1 

KD Combination of E5, E6, E1, I5, I6, and I1 


00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 





Germany 

Emerson Process Management Asia Pacific 

Private Limited — Singapore 




directives for this product can be found on the Rosemount website 

at www.rosemount.com. A hard copy may be obtained by 

contacting an Emerson Process Management representative. 


All 3051 transmitters comply with the ATEX Directive. 


3051CA4; 3051CG2, 3, 4, 5; 3051CD2, 3, 4, 5 

(also with P9 option); 3051HD2, 3, 4, 5; 3051HG2, 3, 4, 5; 

3051PD2, 3; and 3051PG2, 3, 4, 5 Pressure Transmitters 

— QS Certificate of Assessment - 

EC No. 59552-2009-CE-HOU-DNV 

Module H Conformity Assessment 

All other 3051/3001 Pressure Transmitters 


Transmitter Attachments: Diaphragm Seal - Process 

Flange - Manifold 



All 3051 Pressure Transmitters meet all of the requirements of 

EN61326-1:2006 EN61326-2-3: 2006 and NAMUR NE-21 

Ordinary Location Certification for Factory Mutual 


determine that the design meets basic electrical, mechanical, 

and fire protection requirements by FM, a nationally recognized 

testing laboratory (NRTL) as accredited by the Federal 

Occupational Safety and Health Administration (OSHA). 

3051L Product Certifications 


3051L HART PROTOCOL 



FM Approvals 

E5 Explosion-Proof for Class I, Division 1, Groups B, C, and D. 

Dust-Ignition-Proof for Class II, Division 1, Groups E, F, and 

G. Dust-Ignition-Proof for Class III, Division 1. 

Factory Sealed, Enclosure Type 4X 



Division 1 when connected per Rosemount drawing 

03031-1019; Non-incendive for Class I, Division 2, Groups 

A, B, C, and D. 

Temperature Code:T4 (Ta = 40 °C), T3 (Ta = 85 °C), 


For input parameters see control drawing 03031-1019. 



ANSI/ISA 12.27.01-2003. 


Dust-Ignition-Proof for Class II and Class III, Division 1, 

Groups E, F, and G. Suitable for Class I, Division 2 Groups 

A, B, C, and D for indoor and outdoor hazardous locations. 

Enclosure type 4X, factory sealed 

C6 Explosion-Proof and intrinsically safe approval. Intrinsically 

safe for Class I, Division 1, Groups A, B, C, and D when 

connected in accordance with Rosemount drawings 

03031-1024. Temperature Code T3C. 

Explosion-Proof for Class I, Division 1, Groups B, C, and D. 



A, B, C, and D hazardous locations. Enclosure type 4X, 

factory sealed 



I1 ATEX Intrinsic Safety and Dust 

Certification No.: BAS 97ATEX1089X II 1 GD 

Ex ia IIC T4 (–60 � T a � +70 °C) 

Dust Rating: Ex tD A20 T80 °C (–20 � T a � 40 °C) IP66 

1180 


Ui = 30 V 

Ii = 200 mA 

Pi = 0.9 W 

Ci = 0.012 µF 

Table 58. RTD Assembly (3051CFx Option T or R) 

U i = 5 Vdc 

I i = 500 mA 

P i = 0.63 W 

107


Special Conditions for Safe Use (X): 

When the optional transient protection terminal block is 

installed, the apparatus is not capable of withstanding the 

500 V insulation test required by Clause 6.3.12 of 

EN60079-11. This must be taken into account when 

installing the apparatus. 

The enclosure may be made of aluminium alloy and given a 

protective polyurethane paint finish; however, care should 

be taken to protect it from impact or abrasion if located in 

Zone 0. 

N1 ATEX Type n and Dust 



Ex nA nL T5 (–40 °C � Tamb � 70 °C) 

Dust rating: Ex tD A22 T80 °C (–20 � Ta � 40 °C) IP66 

108 



installed, the apparatus is not capable of withstanding a 500 

V r.m.s. test to case. This must be taken into account on any 

installation in which it is used, for example, by assuring that 

the supply to the apparatus is galvanically isolated. 

E8 ATEX Flame-Proof and Dust 

Certification No.: KEMA 00ATEX2013X II 1 /2 GD 

Ex d IIC T6 (–50 � Ta � 65 °C) 

T5 (–50 � Ta � 80 °C) 

Dust rating: Ex tD A20/A21 T90 °C, IP66 

1180 

Vmax = 55 Vdc 


This device contains a thin wall diaphragm. Installation, 




and maintenance shall be followed in detail to assure safety 


In case of repair, contact Rosemount for dimensions of the 

flameproof joints. 


E4 TIIS Flame-Proof 

Ex d IIC T6 


C15850 3051C/D/1 4–20 mA HART 

— no display 

C15851 3051C/D/1 4–20 mA HART 

— with display 



Certification No.: IECEx BAS 09.0076X 

Ex ia IIC T4 (–60 °C � T a � 70 °C) 

IP66 

TABLE 59. Input Parameters 

Ui = 30 V 

Ii = 200 mA 

Pi = 0.9 W 

Ci = 0.012 µF 


00813-0100-4016, Rev MB 


TABLE 60. RTD Assembly (3051CFx Option T or R) 

Ui = 5 Vdc 

Ii = 500 mA 

Pi = 0.63 W 




500 V insulation test required by Clause 6.3.12 of IEC 

60079-11. This must be taken into account when installing 

the apparatus. 


protective polyurethane paint finish; however care should be 

taken to protect it from impact or abrasion located in Zone 0. 

E7 IECEx Explosion-Proof (Flame-Proof) 

Certification No.: IECEx KEM 09.0034X 

Ga/Gb Ex d IIC T6 or T5 

Ex tD A20/A21 IP66 T90 °C 

IP66 





subjected. The manufacturer's instructions for installation 



For information on the dimensions of the flameproof joints 

the manufacturer shall be contacted. 



Ex nA nL IIC T5 (–40 °C � Ta � 70 °C) 

IP66 



insulation test required by clause 6.8.1 of IEC 60079-15. 

This must be taken into account when installing the 

apparatus. 







K5 E5 and I5 combination 

KB K5 and C6 combination 

KD K5, C6, I1, and E8 combination 

K6 C6, I1, and E8 combination 


K7 E7, I7, and N7 combination


00813-0100-4016, Rev MB 


3051L FIELDBUS PROTOCOL 



FM Approvals 



G. Dust-Ignition-Proof for Class III, Division 1. Factory 

sealed. Enclosure Type 4X. 



Division 1 when connected per Rosemount drawing 

03031-1019; Non-incendive for Class I, Division 2, Groups 

A, B, C, and D. 

Temperature Code: T4 (Ta = 60 °C), Enclosure Type 4X 




ANSI/ISA 12.27.01-2003. 






C6 Explosion-Proof and intrinsically safe approval. Intrinsically 

safe for Class I, Division 1, Groups A, B, C, and D when 

connected in accordance with Rosemount drawings 

03031-1024. Temperature Code T3C. 

Explosion-Proof for Class I, Division 1, Groups B, C, and D. 







I1 ATEX Intrinsic Safety and Dust 


Ex ia IIC T4 (Tamb = –60 to +60 °C) 

Dust Rating: Ex tD A20 T70 °C (Tamb –20 to 40 °C) IP66 

1180 


U i = 30 V 

I i = 300 mA 

P i = 1.3 W 

C i = 0 µF 


Ui = 5 Vdc 

Ii = 500 mA 

Pi = 0.63 W 



The device is not capable of withstanding the 500 V 

insulation test required by Clause 6.3.12 of EN60079-11. 


apparatus. 




Zone 0. 

IA ATEX FISCO Intrinsic Safety 

Certification No.: BAS 98ATEX1355X II 1 G 

Ex ia IIC T4 (Tamb = –60 to +60 °C) 

IP66 

1180 


U i = 17.5 V 

I i = 380 mA 

P i = 5.32 W 

C i = � 5 µF 

L i = ��10 µH 



insulation test required by Clause 6.3.12 of EN60079-11. 


apparatus. 




Zone 0. 

N1 ATEX Type n and Dust 



Ex nL IIC T5 (Ta = –40 °C to 70 °C) 

Dust rating: Ex tD A22 T80 °C (Tamb = –20 to 40 °C) IP66 



insulation test required by Clause 6.8.1 of EN60079-15. This 

must be taken into account when installing the apparatus. 

E8 ATEX Flame-Proof and Dust 

Certification No.: KEMA 00ATEX2013X II 1 /2 GD 

Ex d IIC T6 (Tamb = –50 to 65 °C) 

T5 (Tamb = –50 to 80 °C) 

Dust rating: Ex tD A20/21 T90 °C, IP66 

1180 

Vmax = 55 Vdc 








In case of repair, contact Rosemount for dimensions of the 

flameproof joints. 

109




Ex d IIC T6 




Ex ia IIC T4 (–60 °C � Ta � 60 °C) 

IP66 

110 


C15852 3051C/D/1 FOUNDATION Fieldbus 

— no display 

C15853 3051C/D/1 FOUNDATION Fieldbus 

— with display 

TABLE 64. Input Parameters 

Ui = 30 V 

Ii = 300 mA 

Pi = 1.3 W 

Ci = 0 µF 

Li = 0 µH 

TABLE 65. RTD Assembly (3051CFx Option T or R) 

Ui = 5 Vdc 

Ii = 500 mA 

Pi = 0.63W 


1. If the apparatus is fitted with an optional 90 V transient 

suppressor, it is not capable of withstanding the 500 V 



apparatus. 

2. The enclosure may be made of aluminium alloy and given 

a protective polyurethane paint finish; however, care 

should be taken to protect it from impact or abrasion if 

located in Zone 0. 


00813-0100-4016, Rev MB 



Certification No.: IECEx KEM 09.0034X 

Ga/Gb Ex d IIC T6 or T5 

Ex tD A20/A21 IP66 T90 °C 

IP66 





subjected. The manufacturer's instructions for installation 



For information on the dimensions of the flameproof joints 

the manufacturer shall be contacted. 



Ex nA nL IIC T5 (–40 °C � Ta � 70 °C) 

IP66 





apparatus. 








KB K5 and C6 combination 

KD K5, C6, I1, and E8 combination 

K6 C6, I1, and E8 combination 


K7 E7, I7, and N7 combination


00813-0100-4016, Rev MB 





Germany 


Private Limited — Singapore 




directives for this product can be found on the Rosemount website 

at www.rosemount.com. A hard copy may be obtained by 

contacting an Emerson Process Management representative. 


All 2051 transmitters comply with the ATEX Directive. 


2051CG2, 3, 4, 5; 2051CD2, 3, 4, 5 (also with P9 option) 

— QS Certificate of Assessment - 

EC No. 59552-2009-CE-HOU-DNV 

Module H Conformity Assessment 

All other 2051 Pressure Transmitters 


Transmitter Attachments: Diaphragm Seal - Process 

Flange - Manifold 



All 2051 Pressure Transmitters meet all of the requirements of 

EN61326:2006 and NAMUR NE-21. 

Ordinary Location Certification for Factory Mutual 


determine that the design meets basic electrical, mechanical, 

and fire protection requirements by FM, a nationally recognized 

testing laboratory (NRTL) as accredited by the Federal 

Occupational Safety and Health Administration (OSHA). 

2051L HART PROTOCOL 



FM Approvals 



G. Dust-Ignition-Proof for Class III, Division 1. 

T5 (Ta = 85 °C), Factory Sealed, Enclosure Type 4X 

2051L Product Certifications 



C, and D; Class 1, Zone 0 AEx ia T4; Class II, Division 1, 

Groups E, F, and G; Class III, Division 1 when connected 

per Rosemount drawing 02051-1009; Non-incendive for 

Class I, Division 2, Groups A, B, C, and D. 

Temperature Code:T4 (Ta = 70 °C), 





ANSI/ISA 12.27.01-2003. 






I6 Intrinsically safe approval. Intrinsically safe for Class I, 

Division 1, Groups A, B, C, and D when connected in 

accordance with Rosemount drawing 02051-1008. 

Temperature Code T3C; Ex ia IIC T3C. 







I1 ATEX Intrinsic Safety 

Certification No. Baseefa08ATEX0129X II 1 G 

Ex ia IIC T4 (–60 � T a � +70 °C) 

IP66 IP68 

1180 


U i = 30 V 

I i = 200 mA 

P i = 1.0 W 

C i = 0.012 µF 

L i = 10 µH 


Ui = 5 Vdc 

Ii = 500 mA 

Pi = 0.63 W 





EN60079-11. This must be taken into account when 


111



Certification No. Baseefa08ATEX0130X II 3 G 

Ex nAnL IIC T4 (–40 � T a � +70 °C) 

U i = 42.4 Vdc max 

IP66 

112 





installation in which it is used, for example by assuring that 


E1 ATEX Flame-Proof 

Certification No. KEMA 08ATEX0090X II 1 /2 G 

Ex d IIC T6 (–50 � Ta � 65 °C) 

Ex d IIC T5 (–50 � Ta � 80 °C) 

IP66 

1180 

Vmax = 42.4 Vdc 








The Ex d blanking elements, cable glands, and wiring shall 

be suitable for a temperature of 90 °C. 

In case of repair, contact the manufacturer for information on 

the dimensions of the flameproof joints. 

ND ATEX Dust 

Certification No. Baseefa08ATEX0182X II 1 D 

Dust Rating: II 1 D Ex tD A20 T115 °C (-20 °C ��Ta � 85 °C) 

IP66 IP68 


A = 22 mA 

1180 


1. The user must ensure that the maximum rated voltage 

and current (42.4 V, 22 mA, DC) are not exceeded. All 

connections to other apparatus or associated apparatus 

shall have control over this voltage and current equivalent 

to a category “ib” circuit according to EN 60079-1. 











00813-0100-4016, Rev MB 



Certification No. IECExBAS08.0045X II 1 G 

Ex ia IIC T4 (–60 � T a � +70 °C) 

1180 


Ui = 30 V 

Ii = 200 mA 

Pi = 1.0 W 

Ci = 0.012 µF 

Li = 10 µH 


Ui = 5 Vdc 

Ii = 500 mA 

Pi = 0.63 W 





IEC60079-11. This must be taken into account when 



Certification No. IECEx KEM 08.0024X II 1 /2 G 

Ex d IIC T6 (–50 � Ta � 65 °C) 

Ex d IIC T5 (–50 � Ta � 80 °C) 

1180 









The Ex d blanking elements, cable glands, and wiring shall 

be suitable for a temperature of 90 °C. 

In case of repair, contact the manufacturer for information on 

the dimensions of the flameproof joints. 


Certification No. IECExBAS08.0046X II 3 G 

Ex nAnL IIC T4 (–40 � Ta � +70 °C) 

Ui = 42.4 Vdc max 





installation in which it is used, for example by assuring that 


TIIS Certifications 


Ex d IIC T6 

TC18872 Coplanar with Display 

TC18873 Coplanar no display


00813-0100-4016, Rev MB 


Inmetro Certifications 

E2 Flame-Proof 

Certificate No. CEPEL EX-1767/09X 

BR-Ex d IIC T6/T5 

I2 Intrinsic Safety 

Certificate No. CEPEL EX-1768/09X 

BR-Ex ia IIC T4 


U i = 30 V 

I i = 200 mA 

P i = 1.0 W 

C i = 0.012 µF 

L i = 10 µH 


Ui = 5 Vdc 

Ii = 500 mA 

Pi = 0.63 W 





IEC60079-11. This must be taken into account when 


GOST - Russia Certifications 

IM Intrinsic Safety 

Consult factory for availability 

EM Flame-Proof 

Consult factory for availability 

China (NEPSI) Certifications 

NOTE 



E3 Flame-Proof 

Certificate No.: GYJ081230 

Ex d IIC T5/T6 

I3 Intrinsic Safety 

Certificate No.: GYJ081231X 

Ex ia IIC T4 


U i = 30 V 

I i = 200 mA 

P i = 1.0 W 

C i = 0.012 µF 

L i = 10 µH 

CCoE Certifications 

IW Intrinsic Safety 

Ex ia IIC T4 

EW Flame-Proof 

Ex d IIC T5 or T6 








K1 E1, I1, N1, and ND combination 



K6 I6 and E6 combination 

K7 E7, I7, and N7 combination 

KA E1, I1, E6, and I6 combination 

KB E5, I5, E6, and I6 combination 

KC E1, I1, E5, and I5 combination 

KD E1, I1, E5, I5, E6, and I6 combination 

113


114 

Dimensional Drawings 

Figure 2. Rosemount 3051S ERS Measurement Transmitter (Measurement in inches (millimeters)) 

5.21 (132) 

4.55 (116) 

Rosemount 3051S ERS Measurement Transmitter - Coplanar Style 

Rosemount 3051S ERS Measurement Transmitter - In-Line Style 

4.20 (107) 

8.22 

(209) 


00813-0100-4016, Rev MB 


3.45 (88)


00813-0100-4016, Rev MB 



Figure 3. Rosemount 3051S Scalable Level Transmitter with FF Seal (Measurement in inches (millimeters)) 

Rosemount 3051S Scalable Level Transmitter with FF (1)(2) - Coplanar Style 

+ Direct Mount 


(1) FF (FFW) seal dimensions and pressure ratings can be found on page 125. 

(2) Lower housing (flushing ring) is available with FFW style flange. 

Rosemount 3051S Scalable Level Transmitter with FF (1)(2) - In-Line Style 

115


Figure 4. Rosemount 3051S Scalable Level Transmitter with EF Seal (Measurement in inches (millimeters)) 

116 

Rosemount 3051S Scalable Level Transmitter with EF (1) - Coplanar Style 



Rosemount 3051S Scalable Level Transmitter with EF (1) - In-Line Style 

(1) EF (EFW) seal dimensions and pressure ratings can be found on page 131. 


00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 



Figure 5. Rosemount 3051S Scalable Level Transmitter with RF Seal (Measurement in inches (millimeters)) 

Rosemount 3051S Scalable Level Transmitter with RF (1) - Coplanar Style 



Rosemount 3051S Scalable Level Transmitter with RF (1) - In-Line Style 

(1) RF (RFW) seal dimensions and pressure ratings can be found on page 127. 

117


Figure 6. Rosemount 3051S Scalable Level Transmitter with RT Seal (Measurement in inches (millimeters)) 

118 

(1) RT (RTW) seal dimensions can be found on page 138. 

Rosemount 3051S Scalable Level Transmitter with RT (1) - Coplanar Style 

Rosemount 3051S Scalable Level Transmitter with RT (1) - In-Line Style 

116 




00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 



Figure 7. Rosemount 3051S Scalable Level Transmitter with SS Seal (Measurement in inches (millimeters)) 

Rosemount 3051S Scalable Level Transmitter with SS (1) - Coplanar Style 



Rosemount 3051S Scalable Level Transmitter with SS (1) - In-Line Style 

(1) SS (SSW) seal dimensions and pressure ratings can be found on page 128. 

119


Figure 8. Rosemount 3051S Scalable Level Transmitter with SC Seal (Measurement in inches (millimeters)) 

120 

Rosemount 3051S Scalable Level Transmitter with SC (1) - Coplanar Style 



Rosemount 3051S Scalable Level Transmitter with SC (1) - In-Line Style 

(1) SC (SCW) seal dimensions and pressure ratings can be found on page 139. 


00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 



Figure 9. Wireless Antenna on a Wireless PlantWeb Housing (1)(2) with FF Seal (Measurement in inches (millimeters)) 

(1) Wireless 3051SAL_C transmitters require wireless transmitter output (option code X), the wireless PlantWeb housing (option codes 5A, 5B), an external 

antenna option (option codes WK, WM), as well as a SmartPower supply (option code 1). 

(2) Antenna rotation and dimensions are equal for both Inline and Coplanar styles of transmitters. 

121


Figure 10. Rosemount 3051L Level Transmitter with FF or EF Seal (Measurement in inches (millimeters)) (1) 

122 

“A” 

(1) FF (FFW) and EF (EFW) seal and flange diameter dimensions can be viewed on page 125 and page 131. 

Transmitter Direct Mount Extension 

Flange Rating Transmitter Flange Extension Extension Dimension (“A”) 

ANSI/ASME B16.5 Class 600 2-in. 7.65 in. (194,3 mm) 

All others 0-in. 5.65 in. (143,5 mm) 

Figure 11. Rosemount 2051L Level Transmitter with FF or EF Seal (Measurement in inches (millimeters)) (1) 

(1) FF (FFW) and EF (EFW) seal and flange diameter dimensions can be viewed on page 125 and page 131. 

, 


00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 


Figure 12. Tuned System Assembly (Measurement in inches (millimeters)) 

Tuned System Assembly (1)(2) shown with Rosemount 3051S Scalable Level Transmitter 

(116) 

(1) Tuned System Assemblies require specification of capillary length and addition 1199 Remote Seal. 

(2) Tuned System Assemblies are available on all Level Transmitters. 


Rosemount 1199 Remote Seal System Assembly shown with Rosemount 3051S Scalable Transmitter 

Capillary Connects 

to 1199 Remote Seals 

(116) 

123


Figure 13. Thermal Optimizer (D5) with FFW (Measurement in inches (millimeters)) 

124 

(116) 


00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 


Figure 14. FFW Flush Flanged Seal - Two-Piece Design (shown with flushing ring) 


Table 73. Dimensional Table for FFW Flush Flanged Raised Face Seals Two Piece (Upper Housing and Flange) Design (1) 

ANSI/ ASME 

EN1092-1 

JIS 

Pipe Size Class Flange 

Diameter 

“A” 

Flange 

Thickness 

“B” 

Bolt 

Circle 

“C” 

# of Bolts Bolt Hole 

Diameter 

“D” 


Diaphragm 

Diameter 

“F” 

Raised Face 

Outer 

Diameter 

“G” 

2-in. 150 lb. 6.00 (152) 0.69 (18) 4.75 (121) 4 0.75 (19) 2.30 (58) 3.62 (92) 

300 lb. 6.50 (165) 0.81 (21) 5.00 (127) 8 0.75 (19) 2.30 (58) 3.62 (92) 

600 lb. 6.50 (165) 1.00 (25) 5.00 (127) 8 0.75 (19) 2.30 (58) 3.62 (92) 

3-in. 150 lb. 7.50 (191) 0.88 (22) 6.00 (152) 4 0.75 (19) 3.50 (89) 5.00 (127) 

300 lb. 8.25 (210) 1.06 (27) 6.62 (168) 8 0.88 (22) 3.50 (89) 5.00 (127) 

600 lb. 8.25 (210) 1.25 (32) 6.62 (168) 8 0.88 (22) 3.50 (89) 5.00 (127) 

4-in. 150 lb. 9.00 (229) 0.88 (22) 7.50 (191) 8 0.75 (19) 3.50 (89) 6.20 (157) 

300 lb. 10.0 (254) 1.19 (30) 7.88 (200) 8 0.88 (22) 3.50 (89) 6.20 (157) 

600 lb. 10.75 (273) 1.50 (38) 8.50 (216) 8 1.00 (25) 3.50 (89) 6.20 (157) 

DN 50 PN 40 6.50 (165) 0.79 (20) 4.92 (125) 4 0.71 (18) 2.30 (58) 4.00 (102) 

PN 63 7.09 (180) 1.02 (26) 5.31 (135) 4 0.87 (22) 2.30 (58) 4.00 (102) 

PN 100 7.68 (195) 1.10 (28) 5.71 (145) 4 1.02 (26) 2.30 (58) 4.00 (102) 

DN 80 PN 40 7.87 (200) 0.94 (24) 6.30 (160) 8 0.71 (18) 3.50 (89) 5.43 (138) 

PN 63 8.46 (215) 1.10 (28) 6.69 (170) 8 0.88 (22) 3.50 (89) 5.43 (138) 

PN 100 9.06 (230) 1.26 (32) 7.09 (180) 8 1.02 (26) 3.50 (89) 5.43 (138) 

DN 100 PN 16 8.66 (220) 0.79 (20) 7.09 (180) 8 0.71 (18) 3.50 (89) 6.20 (157) 

PN 40 9.25 (235) 0.94 (24) 7.48 (190) 8 0.87 (22) 3.50 (89) 6.20 (157) 

PN 63 9.84 (250) 1.18 (30) 7.87 (200) 8 1.02 (26) 3.50 (89) 6.20 (157) 

50A 10K 6.10 (155) 0.63 (16) 4.72 (120) 4 0.75 (19) 2.30 (58) 3.62 (92) 

20K 6.10 (155) 0.71 (18) 4.72 (120) 8 0.75 (19) 2.30 (58) 3.62 (92) 

40K 6.50 (165) 1.02 (26) 5.12 (130) 8 0.75 (19) 2.30 (58) 4.00 (102) 

80A 10K 7.28 (185) 0.71 (18) 5.91 (150) 8 0.75 (19) 3.50 (89) 5.00 (127) 

20K 7.87 (200) 0.87 (22) 6.30 (160) 8 0.91 (23) 3.50 (89) 5.00 (127) 

40K 8.27 (210) 1.26 (32) 6.69 (170) 8 0.91 (23) 3.50 (89) 5.43 (138) 

100A 10K 8.27 (210) 0.71 (18) 6.89 (175) 8 0.75 (19) 3.50 (89) 6.20 (157) 

20K 8.86 (225) 0.95 (24) 7.28 (185) 8 0.91 (23) 3.50 (89) 6.20 (157) 

40K 9.84 (250) 1.42 (36) 8.07 (205) 8 0.98 (25) 3.50 (89) 6.20 (157) 

(1) Dimensions are in inches (millimeters). 

125


126 


00813-0100-4016, Rev MB 


Table 57. Dimensional Table for FFW Flush Flanged Raised Face Seals Two Piece (Upper Housing and Flange) Design (1) 

ANSI / ASME 

EN1092-1 

JIS 

Pipe Size INNER DIAMETER 

“K” 

BEVELED EDGE “L” THICKNESS WITH 

1 /4-NPT F.C. “M” 

THICKNESS WITH 

1 /2-NPT F.C. “M” 

MINIMUM GASKET 

I.D. “N” 

2-in. 2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 2.62 (67) 

2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 2.62 (67) 

2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 2.62 (67) 

3-in. 3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

4-in. 3.60 (91) — 0.97 (25) 1.30 (33) 4.50 (113) 

3.60 (91) — 0.97 (25) 1.30 (33) 4.50 (113) 

3.60 (91) — 0.97 (25) 1.30 (33) 4.50 (113) 

DN 50 2.40 (61) — 0.97 (25) 1.30 (33) 2.62 (67) 

2.40 (61) — 0.97 (25) 1.30 (33) 2.62 (67) 

2.40 (61) — 0.97 (25) 1.30 (33) 2.62 (67) 

DN 80 3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

DN 100 3.60 (91) — 0.97 (25) 1.30 (33) 4.50 (113) 

3.60 (91) — 0.97 (25) 1.30 (33) 4.50 (113) 

3.60 (91) — 0.97 (25) 1.30 (33) 4.50 (113) 

50A 2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 2.62 (67) 

2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 2.62 (67) 

2.40 (61) — 0.97 (25) 1.30 (33) 2.62 (67) 

80A 3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

100A 3.60 (91) — 0.97 (25) 1.30 (33) 4.50 (113) 

3.60 (91) — 0.97 (25) 1.30 (33) 4.50 (113) 

3.60 (91) — 0.97 (25) 1.30 (33) 4.50 (113) 

(1) Dimensions are in inches (millimeters).


00813-0100-4016, Rev MB 


Figure 15. FFW Flush Flanged Seal - One-Piece Design (shown with flushing ring) 


Table 58. Dimensional Table for FFW Flush Flanged Seals One Piece (Upper Housing and Flange) Design (Option code E) (1) 

ANSI / ASME 

EN1092-1 

JIS 


Diameter 

“A” 

Flange 

Thickness 

“B” 

Bolt 

Circle 

“C” 

# of 

Bolts 

Bolt Hole 

Diameter 

“D” 


Diaphragm 

Diameter 

“F” 

Raised 

Face 

Diameter 

“G” 

Raised 

Face 

Height 

“J” 

MINIMUM 

GASKET 

I.D. “N” 

2-in. 150 lb. 6.00 (152) 0.69 (18) 4.75 (121) 4 0.75 (19) 2.30 (58) 3.62 (92) 0.06 (1.5) 2.62 (67) 

300 lb. 6.50 (165) 0.81 (21) 5.00 (127) 8 0.75 (19) 2.30 (58) 3.62 (92) 0.06 (1.5) 2.62 (67) 

600 lb. 6.50 (165) 1.00 (25) 5.00 (127) 8 0.75 (19) 2.30 (58) 3.62 (92) 0.25 (6.4) 2.62 (67) 

3-in. 150 lb. 7.50 (191) 0.88 (22) 6.00 (152) 4 0.75 (19) 3.50 (89) 5.00 (127) 0.06 (1.5) 3.82 (97) 

300 lb. 8.25 (210) 1.06 (27) 6.62 (168) 8 0.88 (22) 3.50 (89) 5.00 (127) 0.06 (1.5) 3.82 (97) 

600 lb. 8.25 (210) 1.25 (32) 6.62 (168) 8 0.88 (22) 3.50 (89) 5.00 (127) 0.25 (6.4) 3.82 (97) 

4-in. 150 lb. 9.00 (229) 0.88 (22) 7.50 (191) 8 0.75 (19) 3.50 (89) 6.20 (157) 0.06 (1.5) 4.50 (114) 

300 lb. 10.00 (254) 1.19 (30) 7.88 (200) 8 0.88 (22) 3.50 (89) 6.20 (157) 0.06 (1.5) 4.50 (114) 

600 lb. 10.75 (273) 1.50 (38) 8.50 (216) 8 1.00 (25) 3.50 (89) 6.20 (157) 0.25 (6.4) 4.50 (114) 

DN 50 PN 40 6.50 (165) 0.67 (17) 4.92 (125) 4 0.71 (18) 2.30 (58) 4.00 (102) 0.12 (3.0) 2.62 (67) 

PN 63 7.08 (180) 0.91 (23) 5.31 (135) 4 0.87 (22) 2.30 (58) 4.00 (102) 0.12 (3.0) 2.62 (67) 

PN 100 7.68 (195) 0.99 (25) 5.71 (145) 4 1.02 (26) 2.30 (58) 4.00 (102) 0.12 (3.0) 2.62 (67) 

DN 80 PN 40 7.87 (200) 0.83 (21) 6.30 (160) 8 0.71 (18) 3.50 (89) 5.43 (138) 0.12 (3.0) 3.82 (97) 

PN 63 8.46 (215) 0.99 (25) 6.69 (170) 8 0.88 (22) 3.50 (89) 5.43 (138) 0.12 (3.0) 3.82 (97) 

PN 100 9.06 (230) 1.15 (29) 7.09 (180) 8 1.02 (26) 3.50 (89) 5.43 (138) 0.12 (3.0) 3.82 (97) 

DN 100 PN 16 8.66 (220) 0.67 (17) 7.09 (180) 8 0.71 (18) 3.50 (89) 6.20 (157) 0.12 (3.0) 4.50 (114) 

PN 40 9.25 (235) 0.83 (21) 7.48 (190) 8 0.87 (22) 3.50 (89) 6.20 (157) 0.12 (3.0) 4.50 (114) 

PN 63 9.84 (250) 1.07 (27) 7.87 (200) 8 1.02 (26) 3.50 (89) 6.20 (157) 0.12 (3.0) 4.50 (114) 

50A 10K 6.10 (155) 0.63 (16) 4.72 (120) 4 0.75 (19) 2.30 (58) 3.62 (92) 0.08 (2.0) 2.62 (67) 

20K 6.10 (155) 0.71 (18) 4.72 (120) 8 0.75 (19) 2.30 (58) 3.62 (92) 0.08 (2.0) 2.62 (67) 

40K 6.50 (165) 1.02 (26) 5.12 (130) 8 0.75 (19) 2.30 (58) 3.62 (92) 0.08 (2.0) 2.62 (67) 

80A 10K 7.28 (185) 0.71 (18) 5.91 (150) 8 0.75 (19) 3.50 (89) 5.00 (127) 0.08 (2.0) 3.82 (97) 

20K 7.87 (200) 0.87 (22) 6.30 (160) 8 0.91 (23) 3.50 (89) 5.00 (127) 0.08 (2.0) 3.82 (97) 

40K 8.27 (210) 1.26 (32) 6.69 (170) 8 0.91 (23) 3.50 (89) 5.00 (127) 0.08 (2.0) 3.82 (97) 

100A 10K 8.27 (210) 0.71 (18) 6.89 (175) 8 0.75 (19) 3.50 (89) 6.20 (157) 0.08 (2.0) 4.50 (114) 

20K 8.86 (225) 0.95 (24) 7.28 (185) 8 0.91 (23) 3.50 (89) 6.20 (157) 0.08 (2.0) 4.50 (114) 

40K 9.84 (250) 1.42 (36) 8.07 (205) 8 0.98 (25) 3.50 (89) 6.20 (157) 0.08 (2.0) 4.50 (114) 


127


Figure 16. FFW Flush Flanged Seal - Flushing Connection Ring (Lower Housing) 

Table 1. Dimensional Table for FFW Flushing Connection Ring (Lower Housing) (1) 

ANSI / ASME 

EN1092-1 

JIS 

128 

Pipe Size Raised Face 

Diameter “G” 

2-in. 

3-in. 

4-in. 

DN 50 

DN 80 

DN 100 


K 

L 

G 

Inner Diameter “K” Beveled Edge “L” Thickness with 

1 /4–NPT F.C. “M” 


00813-0100-4016, Rev MB 


Thickness with 

1 /2–NPT F.C. “M” 

3.62 (92) 2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 

3.62 (92) 2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 

3.62 (92) 2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 

5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 

5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 

5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 

6.20 (157) 3.60 (91) — 0.97 (25) 1.30 (33) 

6.20 (157) 3.60 (91) — 0.97 (25) 1.30 (33) 

6.20 (157) 3.60 (91) — 0.97 (25) 1.30 (33) 

4.00 (102) 2.40 (61) — 0.97 (25) 1.30 (33) 

4.00 (102) 2.40 (61) — 0.97 (25) 1.30 (33) 

4.00 (102) 2.40 (61) — 0.97 (25) 1.30 (33) 

5.43 (138) 3.60 (91) — 0.97 (25) 1.30 (33) 

5.43 (138) 3.60 (91) — 0.97 (25) 1.30 (33) 

5.43 (138) 3.60 (91) — 0.97 (25) 1.30 (33) 

6.20 (157) 3.60 (91) — 0.97 (25) 1.30 (33) 

6.20 (157) 3.60 (91) — 0.97 (25) 1.30 (33) 

6.20 (157) 3.60 (91) — 0.97 (25) 1.30 (33) 

50A 3.62 (92) 2.12 (54) — 0.97 (25) 1.30 (33) 

3.62 (92) 2.12 (54) — 0.97 (25) 1.30 (33) 

3.62 (92) 2.12 (54) — 0.97 (25) 1.30 (33) 

80A 5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 

5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 

5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 

100A 6.20 (157) 3.60 (91) — 0.97 (25) 1.30 (33) 

6.20 (157) 3.60 (91) — 0.97 (25) 1.30 (33) 

6.20 (157) 3.60 (91) — 0.97 (25) 1.30 (33) 


M


00813-0100-4016, Rev MB 


Figure 17. RFW Flanged Seal Standard Design 

Table 2. RFW Flanged Seal Standard Design Dimensions (1)(2) 

ANSI / ASME 

EN 1092-1 

JIS 


Diameter 

“A” 

Flange 

Thickness 

“B” 


(2) Lower housing is loose on standard design, consult factory for retained lower housing options. 


Overall Height “C” Bolt Circle 

Diameter 

“D” 

No or 1 /4-in. 

NPT flush 

connection 

1 /2-in. NPT 

flush 

connection 

Bolt Hole 

Diameter 

“E” 

Lower 

Housing 

Diameter “F” 

1 

/2-in. 2500 lb. 5.25 (133) 1.19 (30) 2.45 (62) 2.79 (71) 3.50 (89) 0.88 (22) 2.62 (67) 

3 

/4-in. 300/600 lb. 4.62 (117) 0.62 (16) 2.45 (62) 2.79 (71) 3.25 (83) 0.75 (19) 2.62 (67) 

1-in. 150 lb. 4.25 (108) 0.50 (13) 2.45 (62) 2.79 (71) 3.12 (79) 0.63 (16) 2.62 (67) 

300 lb. 4.88 (124) 0.62 (16) 2.45 (62) 2.79 (71) 3.50 (89) 0.75 (19) 2.62 (67) 

600 lb. 4.88 (124) 0.69 (18) 2.45 (62) 2.79 (71) 3.50 (89) 0.75 (19) 2.62 (67) 

1 1 /2-in. 150 lb. 5.00 (127) 0.62 (16) 2.45 (62) 2.79 (71) 3.88 (99) 0.63 (16) 2.88 (73) 

300 lb. 6.12 (155) 0.75 (19) 2.45 (62) 2.79 (71) 4.50 (114) 0.88 (22) 2.88 (73) 

600 lb. 6.12 (155) 0.88 (22) 2.45 (62) 2.79 (71) 4.50 (114) 0.88 (22) 2.88 (73) 

DN 25 PN 40 4.53 (115) 0.71 (18) 2.45 (62) 2.79 (71) 3.35 (85) 0.55 (14) 2.68 (68) 

DN 40 PN 40 5.91 (150) 0.71 (18) 2.45 (62) 2.79 (71) 4.33 (110) 0.71 (18) 3.47 (88) 

20A 40K 4.72 (120) 0.79 (20) 2.45 (62) 2.79 (71) 3.35 (85) 0.75 (19) 2.62 (67) 

25A 10K 4.92 (125) 0.55 (14) 2.45 (62) 2.79 (71) 3.54 (90) 0.75 (19) 2.62 (67) 

20K 4.92 (125) 0.63 (16) 2.45 (62) 2.79 (71) 3.54 (90) 0.75 (19) 2.62 (67) 

40K 5.12 (130) 0.87 (22) 2.45 (62) 2.79 (71) 3.74 (95) 0.75 (19) 2.76 (70) 

40A 10K 5.51 (140) 0.63 (16) 2.45 (62) 2.79 (71) 4.13 (105) 0.75 (19) 3.19 (81) 

20K 5.51 (140) 0.71 (18) 2.45 (62) 2.79 (71) 4.13 (105) 0.75 (19) 3.19 (81) 

40K 6.30 (160) 0.94 (24) 2.45 (62) 2.79 (71) 4.72 (120) 0.91 (23) 3.54 (90) 

129


Figure 18. RFW Flanged Seal Stud Bolt Design 

Table 3. RFW Flanged Seal Stud Bolt Design Dimensions (1) 

ANSI / ASME 

EN 1092-1 

JIS 

130 

Pipe Size Class Overall Height “A” Stud Circle 

Diameter “B” 

No or 1 /4-in. 

NPT flush 

connection 

1 /2-in. NPT 

flush 

connection 

(1) Upper and lower housing installed bolt torque with CS or SST bolts is 23 ft-lbs. (31 Nm). 

Stud (Size, 

Length) “C” 


00813-0100-4016, Rev MB 


Lower Housing 

Diameter “D” 

Raised Face 

Diameter “E” 

1 /2-in. 150 lb. 2.52 (64) 2.82 (72) 2.38 (61) 1 /2-13NC, 2.5-in. 3.74 (95) 1.38 (35) 

1 /2-in. 300/600 lb. 2.77 (70) 2.87 (73) 2.62 (67) 1 /2-13NC, 2.5-in. 3.75 (95) 1.38 (35) 

3 

/4-in. 150 lb. 2.52 (64) 2.82 (72) 2.75 (70) 

1 

/2-13NC, 2.5-in. 3.88 (99) 1.69 (43) 

DN 15 PN 40 2.52 (64) 2.82 (72) 2.56 (65) M12x1.75, 60mm 3.74 (95) 1.77 (45) 

DN 15 PN 100/160 2.52 (64) 2.82 (72) 2.95 (75) M12x1.75, 60mm 4.13 (105) 1.77 (45) 

DN 20 PN 40 2.52 (64) 2.82 (72) 2.95 (75) M12x1.75, 60mm 4.13 (105) 2.28 (58) 

10A 10K 2.52 (64) 2.82 (72) 2.56 (65) M12x1.75,60mm 3.74 (95) 1.81 (46) 

20K 2.52 (64) 2.82 (72) 2.56 (65) M12x1.75,60mm 3.74 (95) 1.81 (46) 

40K 2.52 (64) 2.82 (72) 2.95 (75) M16x2.00,70mm 4.33 (110) 2.05 (52) 

15A 10K 2.52 (64) 2.82 (72) 2.76 (70) M12x1.75,60mm 3.74 (95) 2.01 (51) 

20K 2.52 (64) 2.82 (72) 2.76 (70) M12x2.00,60mm 3.74 (95) 2.01 (51) 

40K 2.52 (64) 2.82 (72) 3.15 (80) M16x2.00,70mm 4.53 (115) 2.17 (55) 

20A 10K 2.52 (64) 2.82 (72) 2.95 (75) M12x1.75,60mm 3.94 (100) 2.21 (56) 

20K 2.52 (64) 2.82 (72) 2.95 (75) M12x1.75,60mm 3.94 (100) 2.21 (56)


00813-0100-4016, Rev MB 


Figure 19. EFW Extended Flanged Seal - Extended Flanged Assembly 

Table 4. EFW Extended Flanged Seal Dimensions (1) 

ANSI / ASME 

EN 1092-1 

JIS 

Pipe Size Class Flange Diameter “A” Flange Thickness 

“B” 


Bolt Circle “C” # of 

Bolts 


Bolt Hole 


Raised Face 


11 150 lb. 5.00 (127) 0.62 (16) 3.88 (99) 4 0.63 (16) 2.88 (73) 

/2-in. 300 lb. 6.12 (156) 0.75 (19) 4.50 (114) 4 0.88 (22) 2.88 (73) 

600 lb. 6.12 (156) 0.88 (22) 4.50 (114) 4 0.88 (22) 2.88 (73) 

150 lb. 6.00 (152) 0.69 (18) 4.75 (121) 4 0.75 (19) 3.62 (92) 

2-in. 300 lb. 6.50 (165) 0.82 (21) 5.00 (127) 8 0.75 (19) 3.62 (92) 

600 lb. 6.50 (165) 1.00 (25) 5.00 (127) 8 0.75 (19) 3.62 (92) 

150 lb. 7.50 (191) 0.88 (22) 6.00 (152) 4 0.75 (19) 5.00 (127) 

3-in. 300 lb. 8.25 (210) 1.06 (27) 6.62 (168) 8 0.88 (22) 5.00 (127) 

600 lb. 8.25 (210) 1.25 (32) 6.62 (168) 8 0.88 (22) 5.00 (127) 

150 lb. 9.00 (229) 0.88 (22) 7.50 (191) 8 0.75 (19) 6.20 (158) 

4-in. 300 lb. 10.00 (254) 1.19 (30) 7.88 (200) 8 0.88 (22) 6.20 (158) 

600 lb. 10.75 (273) 1.50 (38) 8.50 (216) 8 1.00 (25) 6.20 (158) 

PN 40 6.50 (165) 0.79 (20) 4.92 (125) 4 0.71 (18) 4.02 (102) 

DN 50 PN 63 7.08 (180) 1.02 (26) 5.31 (135) 4 0.87 (22) 4.02 (102) 

PN 100 7.68 (195) 1.10 (28) 5.71 (145) 4 1.02 (26) 4.02 (102) 

PN 40 7.87 (200) 0.94 (24) 6.30 (160) 8 0.71 (18) 5.43 (138) 

DN 80 PN 63 8.46 (215) 1.10 (28) 6.69 (170) 8 0.88 (22) 5.43 (138) 

PN 100 9.06 (230) 1.26 (32) 7.09 (180) 8 1.02 (26) 5.43 (138) 

PN 16 8.66 (220) 0.79 (20) 7.09 (180) 8 0.71 (18) 6.20 (158) 

DN 100 PN 40 9.25 (235) 0.94 (24) 7.48 (190) 8 0.87 (22) 6.20 (158) 

PN 63 9.84 (250) 1.18 (30) 7.87 (200) 8 1.02 (26) 6.20 (158) 

50A 10K 6.10 (155) 0.63 (16) 4.72 (120) 4 0.75 (19) 3.62 (92) 

20K 6.10 (155) 0.71 (18) 4.72 (120) 8 0.75 (19) 3.62 (92) 

40K 6.50 (165) 1.02 (26) 5.12 (130) 8 0.75 (19) 4.00 (102) 

80A 10K 7.28 (185) 0.71 (18) 5.91 (150) 8 0.75 (19) 5.00 (127) 

20K 7.87 (200) 0.87 (22) 6.30 (160) 8 0.91 (23) 5.00 (127) 

40K 8.27 (210) 1.26 (32) 6.69 (170) 8 0.91 (23) 5.43 (138) 

100A 10K 8.27 (210) 0.71 (18) 6.89 (175) 8 0.75 (19) 6.20 (158) 

20K 8.86 (225) 0.94 (24) 7.28 (185) 8 0.91 (23) 6.20 (158) 

40K 9.84 (250) 1.42 (36) 8.07 (205) 8 0.98 (25) 6.20 (158) 

131


132 

Process Connection Size (1) Diameter “E” 

ANSI B16.5 EN 1092-1 JIS B2238 

3-in. DN 80 80A 2.58 (66) 

4-in. DN 100 100A 3.50 (89) 

1 ½-in. DN 40 40A 1.45 (37) 

2-in. DN 50 50A 1.90 (48) 

3-in. Headbox DN 80 Headbox — 2.88 (73) 

4-in. Headbox DN100 Headbox — 3.78 (96) 



00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 


Figure 20. PFW Pancake Seal 

Table 5. PFW Pancake Seal Dimensions (1) 

ANSI / ASME 

EN1092-1 

Pipe 

Size Class 


Flange Diameter 

“A” 

Flange Thickness 

“B” 

# of 

Bolts 


Bolt Circle 

“C” 

Bolt Hole 



Diaphragm 


2-in. 150 lb. 6.00 (152) 0.69 (18) 4 4.75 (121) 0.75 (19) 2.30 (58) 

300 lb. 6.50 (165) 0.81 (21) 8 5.00 (127) 0.75 (19) 2.30 (58) 

600 lb. 6.50 (165) 1.00 (25) 8 5.00 (127) 0.75 (19) 2.30 (58) 

900/1500 lb. 8.50 (216) 1.50 (38) 8 6.50 (165) 1.00 (25) 2.30 (58) 

2500 lb. 9.25 (235) 2.00 (51) 8 6.75 (172) 1.13 (29) 2.30 (58) 

3-in. 150 lb. 7.50 (191) 0.88 (22) 4 6.00 (152) 0.75 (19) 3.50 (89) 

300 lb. 8.25 (210) 1.06 (27) 8 6.62 (168) 0.88 (22) 3.50 (89) 

600 lb. 8.25 (210) 1.25 (32) 8 6.62 (168) 0.88 (22) 3.50 (89) 

900 lb. 10.50 (267) 1.50 (38) 8 8.00 (203) 1.25 (32) 3.50 (89) 

1500 lb. 10.50 (267) 1.88 (48) 8 8.00 (203) 1.25 (32) 3.50 (89) 

2500 lb 12.00 (305) 2.62 (67) 8 9.00 (229) 1.38 (35) 3.50 (89) 

DN 50 PN 40 6.50 (165) 0.67 (17) 4 4.92 (125) 0.71 (18) 2.30 (58) 

PN 63 7.09 (180) 0.91 (23) 4 5.31 (135) 0.87 (22) 2.30 (58) 

PN 100 7.68 (195) 0.98 (25) 4 5.71 (145) 1.10 (28) 2.30 (58) 

DN 80 PN 40 7.87 (200) 0.83 (21) 8 6.30 (160) 0.71 (18) 3.50 (89) 

PN 63 8.46 (215) 0.98 (25) 8 6.69 (170) 0.87 (22) 3.50 (89) 

PN 100 9.06 (230) 0.98 (25) 8 7.09 (180) 1.10 (28) 3.50 (89) 

133


ANSI / ASME 

EN1092-1 

134 

Pipe Size 

Outer Diameter 

“G” 

Inner 

Diameter 

“K” 

Beveled 

Diameter “L” 

Thickness 

with 1 /4-NPT 

F.C. “M” 


00813-0100-4016, Rev MB 



1 /2-NPT F.C. “M” Minimum Gasket I.D. “N” 

2-in. 3.62 (92) 2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 2.62 (67) 

3.62 (92) 2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 2.62 (67) 

3.62 (92) 2.12 (54) 2.48 (63) 0.97 (25) 1.30 (33) 2.62 (67) 

3.62 (92) 2.12 (54) — 0.97 (25) 1.30 (33) 2.62 (67) 

3.62 (92) 2.12 (54) — 0.97 (25) 1.30 (33) 2.62 (67) 

3-in. 5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 2.82 (97) 

5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 2.82 (97) 

5.00 (127) 3.60 (91) — 0.97 (25) 1.30 (33) 2.82 (97) 

DN 50 4.00 (102) 2.40 (61) — 0.97 (25) 1.30 (33) 2.62 (67) 

4.00 (102) 2.40 (61) — 0.97 (25) 1.30 (33) 2.62 (67) 

4.00 (102) 2.40 (61) — 0.97 (25) 1.30 (33) 2.62 (67) 

DN 80 5.43 (138) 3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

5.43 (138) 3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97) 

5.43 (138) 3.60 (91) — 0.97 (25) 1.30 (33) 3.82 (97)


00813-0100-4016, Rev MB 



Figure 21. FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface Two-Piece Design (shown with flushing ring) 

Table 6. Dimensional Table for FCW 2-Piece Flange Type Flush Diaphragm Seal (1) 

ANSI / ASME 

ANSI / ASME 


Diameter “A” 

Flange 

Thickness “B” 

Bolt Circle 

Diameter “C” 

Bolt Hole 


Overall Height 

“H” 

Raised Face 

Height “J” 

2-in. 150 lb. 6.00 (152) 0.69 (18) 4.75 (121) 0.75 (19) 2.43 (62) 0.68 (17) 

300 lb. 6.50 (165) 0.82 (21) 5.00 (127) 0.75 (19) 2.43 (62) 0.68 (17) 

600 lb. 6.50 (165) 1.00 (25) 5.00 (127) 0.75 (19) 2.43 (62) 0.68 (17) 

1500 lb. 8.50 (216) 1.50 (38) 6.50 (165) 1.00 (25) 2.57 (65) 0.82 (21) 

2500 lb. 9.25 (235) 2.00 (51) 6.75 (171) 1.14 (29) 3.07 (78) 0.82 (21) 

3-in. 150 lb. 7.50 (191) 0.88 (22) 6.00 (152) 0.75 (19) 2.43 (62) 0.68 (17) 

300 lb. 8.25 (210) 1.06 (27) 6.62 (168) 0.88 (22) 2.43 (62) 0.68 (17) 

600 lb. 8.25 (210) 1.25 (32) 6.62 (168) 0.88 (22) 2.43 (62) 0.68 (17) 

900 lb. 9.50 (241) 1.50 (38) 7.50 (191) 1.00 (25) 2.57 (65) 0.82 (21) 

1500 lb. 10.50 (267) 1.88 (48) 8.00 (203) 1.25 (32) 3.07 (78) 0.82 (21) 

2500 lb. 12.00 (305) 2.62 (67) 9.00 (229) 1.38 (35) 4.07 (103) 0.82 (21) 


Pipe Size RTJ Diameter 

“E” 

Diaphragm 


Raised Face 

Diameter “G” 

Inner Diameter 

“K” 


1 /4-NPT F.C. “L” 


1 /2-NPT F.C. “L” 

2-in. 3.25 (83) 2.30 (58) 4.00 (102) 2.12 (54) 1.40 (36) 1.70 (43) 

3.25 (83) 2.30 (58) 4.25 (108) 2.12 (54) 1.40 (36) 1.70 (43) 

3.25 (83) 2.30 (58) 4.25 (108) 2.12 (54) 1.40 (36) 1.70 (43) 

3.75 (95) 2.30 (58) 4.88 (124) 2.12 (54) 1.40 (36) 1.70 (43) 

4.00 (102) 3.50 (89) 5.25 (133) 2.12 (54) 1.40 (36) 1.70 (43) 

3-in. 4.50 (114) 3.50 (89) 5.25 (133) 3.60 (91) 1.50 (38) 1.80 (46) 

4.88 (124) 3.50 (89) 5.75 (146) 3.60 (91) 1.50 (38) 1.80 (46) 

4.88 (124) 3.50 (89) 5.75 (146) 3.60 (91) 1.50 (38) 1.80 (46) 

4.88 (124) 3.50 (89) 6.12 (155) 3.60 (91) 1.50 (38) 1.80 (46) 

5.38 (137) 3.50 (89) 6.62 (168) 3.60 (91) 1.50 (38) 1.80 (46) 

5.00 (127) 3.50 (89) 6.62 (168) 3.60 (91) 1.50 (38) 1.80 (46) 

135


Figure 22. RCW Flanged Remote Seal Ring Type Joint (RTJ) and Flushing Connection Ring 

Table 7. RCW Flanged Remote Seal Dimensions (1) 

ANSI / ASME 

136 

Flange 

Diameter 

“A” 


Flange 

Thickness 

“B” 

Bolt Circle 

Diameter 

“C” 

Bolt Hole 

Diameter 

“D” 

Lower 

Housing 

Inner 

Diameter 

“E” 

RTJ 

Groove 

Diameter 

“F” 


00813-0100-4016, Rev MB 


Lower 

Housing 

Outer 

Diameter 

“G” 

Pipe 

Overall Height 

Size Class 

“H” 

No or 

1 

/4-in. NPT 

1 

/2-in. NPT 

flush 

flush 

connection 

connection 

1 

/2-in. 2500 lb. 5.25 (133) 1.19 (30) 3.50 (89) 0.88 (22) 0.62 (16) 1.69 (43) 2.64 (67) 2.88 (73) 3.18 (81) 

3 

/4-in. 300/600 lb. 4.62 (117) 0.62 (16) 3.25 (83) 0.75 (19) 0.82 (21) 1.69 (43) 2.64 (67) 2.88 (73) 3.18 (81) 

3 

/4-in. 900/1500 lb. 5.12 (130) 1.00 (25) 3.50 (89) 0.88 (22) 0.82 (21) 1.75 (45) 2.64 (67) 2.88 (73) 3.18 (81) 

3 

/4-in. 2500 lb. 5.50 (140) 1.25 (32) 3.75 (95) 0.88 (22) 0.82 (21) 2.00 (51) 2.90 (74) 2.88 (73) 3.18 (81) 

1-in. 150 lb. 4.25 (108) 0.50 (13) 3.12 (79) 0.63 (16) 1.05 (27) 1.88 (48) 2.64 (67) 2.88 (73) 3.18 (81) 

1-in. 300 lb. 4.88 (124) 0.62 (16) 3.50 (89) 0.75 (19) 1.05 (27) 2.00 (51) 2.77 (70) 2.88 (73) 3.18 (81) 

1-in. 600 lb. 4.88 (124) 0.69 (18) 3.50 (89) 0.75 (19) 1.05 (27) 2.00 (51) 2.77 (70) 2.88 (73) 3.18 (81) 

1-in. 900/1500 lb. 5.88 (149) 1.12 (29) 4.00 (102) 1.00 (25) 1.05 (27) 2.00 (51) 2.83 (72) 2.88 (73) 3.18 (81) 

1-in. 2500 lb. 6.25 (159) 1.38 (35) 4.25 (108) 1.00 (25) 1.05 (27) 2.38 (60) 3.27 (83) 2.88 (73) 3.18 (81) 

1 1 /2-in. 150 lb. 5.00 (127) 0.62 (16) 3.88 (98) 0.63 (16) 1.61 (41) 2.56 (65) 3.27 (83) 2.88 (73) 3.18 (81) 

1 1 /2-in. 300 lb. 6.12 (156) 0.75 (19) 4.50 (114) 0.88 (22) 1.61 (41) 2.69 (68) 3.58 (91) 2.88 (73) 3.18 (81) 

1 1 /2-in. 600 lb. 6.12 (156) 0.88 (22) 4.50 (114) 0.88 (22) 1.61 (41) 2.69 (68) 3.58 (91) 2.88 (73) 3.18 (81) 

1 1 /2-in. 900/1500 lb. 7.00 (178) 1.25 (32) 4.88 (124) 1.12 (28) 1.61 (41) 2.69 (68) 3.64 (93) 2.88 (73) 3.18 (81) 

1 1 /2-in. 2500 lb. 8.00 (203) 1.75 (45) 5.75 (146) 1.25 (32) 1.61 (41) 3.25 (83) 4.52 (115) 2.88 (73) 3.18 (81)


00813-0100-4016, Rev MB 


Figure 23. FUW Flush Flanged Type Seal - EN1092-1 Type D 

Table 8. FUW Flush Flanged Type Seal Dimensions (1) 

EN 1092-1 

Pipe 

Size 

Class Flange 

Diameter 

“A” 

Flange 

Thickness 

“B” 

Bolt 

Circle 

“C” 

Bolt Hole 

Diameter 

“D” 

Figure 24. FVW Flush Flanged Type Seal - EN1092-1 Type C 

# of 

Bolts 


Diaphragm 

Diameter 

“F” 


Raised 

Face 

Diameter 

“G” 

Groove 

O.D. 

“J” 

Groove 

I.D. 

“K” 

Groove 

Depth 

“L” 

DN 50 PN 40 6.50 (165) 0.79 (20) 4.92 (125) 0.71 (18) 4 2.30 (58) 4.00 (102) 3.46 (88) 2.83 (72) 0.16 (4.0) 

DN 80 PN 40 7.87 (200) 0.94 (24) 6.30 (160) 0.71 (18) 8 3.50 (89) 5.43 (138) 4.76 (121) 4.13 (105) 0.16 (4.0) 

(1) Measurement in inches (millimeters). 

Table 9. FVW Flush Flanged Type Seal Dimensions (1) 

EN 1092-1 

Pipe 

Size 

Class Flange 

Diameter 

“A” 

Flange 

Thickness 

“B” 

Bolt Circle 

“C” 

Bolt Hole 

Diameter 

“D” 

# of 

Bolts 


Diaphragm 


Groove 

O.D. 

“J” 

Tongue 

I.D. 

“K” 

Tongue 

Depth 

“L” 

DN 50 PN 40 6.50 (165) 0.79 (20) 4.92 (125) 0.71 (18) 4 2.30 (58) 3.43 (87) 2.87 (73) 0.18 (4.5) 

DN 80 PN 40 7.87 (200) 0.94 (24) 6.30 (160) 0.71 (18) 8 3.50 (89) 4.72 (120) 4.17 (106) 0.18 (4.5) 

(1) Measurement in inches (millimeters). 

137


Figure 25. RTW Threaded Seal 

Table 10. RTW Threaded Seal Dimensions (1) 

Figure 26. HTS Male Threaded Seal 

138 



00813-0100-4016, Rev MB 


Rating Overall Diameter 'A' Overall Height “B” 

No or 1 /4-in. NPT flush connection 1 /2-in. NPT flush connection 

2500 psi (173 bar) 3.74 (95) 2.47 (63) 2.82 (72) 

5000 psi (345 bar) 3.74 (95) 1.95 (50) 2.31 (59) 

10000 psi (690 bar) 4.00 (102) 1.95 (50) — 

Table 11. HTS Male Threaded Seal Dimensions (1) 

Process Type Connection Size Outer Diameter 

“A” 

Diaphragm Diameter “B” Length “C” Overall Height “D” 

ANSI NPT 1-in. NPT 2.03 (51.6) 1.09 (27.9) 1.24 (31.5) 2.50 (63.5) 

11 /2-in. NPT 2.36 (59.9) 1.70 (43.2) 1.24 (31.5) 2.50 (63.5) 

2-in. NPT 2.74 (69.6) 1.90 (48.3) 1.24 (31.5) 2.50 (63.5) 

EN 10226 BSP G1 BSP 2.03 (51.6) 1.09 (27.9) 0.87 (22.0) 2.15 (54.6) 

G11 /2 BSP 2.36 (59.9) 1.70 (43.2) 0.98 (24.9) 2.24 (56.9) 

G2 BSP 2.74 (69.6) 1.90 (48.3) 1.24 (31.5) 2.50 (63.5) 



00813-0100-4016, Rev MB 


Figure 27. SCW Tri-Clamp Seal 

Table 12. SCW Tri-Clamp Seal Dimensions (1) 


Pipe Size Outer Diameter “A” O-rIng Groove Diameter “B” Diaphragm Diameter “C” 

1 1 /2-in. 2.00 (51) 1.72 (44) 1.21 (31) 

2-in. 2.50 (64) 2.22 (56) 1.68 (43) 

2 1 /2-in. 3.05 (77) 2.78 (71) 2.07 (53) 

3-in. 3.58 (91) 3.28 (83) 2.58 (66) 

4-in. 4.68 (119) 4.35 (110) 3.66 (93) 



139


Figure 15. SSW Tank Spud Seal 

Table 71. SSW Tank Spud Seal Dimensions (1) 

140 


Pipe Size Extension Length “A” 

4-in. SCH 5 2-in. Long 2.10 (53) 

6-in. Long 6.10 (155) 


Figure 16. STW Hygienic Thin Wall Tank Spud Seal 


00813-0100-4016, Rev MB 

September 2012


00813-0100-4016, Rev MB 


Figure 17. EES Hygienic Flanged Tank Spud Extended Seal 

Table 72. EES Hygienic Flanged Tank Spud Extended Seal Dimensions (1) 

Pipe Size Flange 

Diameter “A” 

Figure 18. VCS Tri-clamp In-Line Seal 

Flange 

Thickness “B” 

# of Bolts Bolt Circle 




Diaphragm 


Extension 


Bolt Hole 


DN50 (1) 6.50 (165) 0.79 (20) 4 4.92 (125) 2.99 (76) 3.24 (82) 0.55 (14) 

DN80 7.87 (200) 0.94 (24) 8 6.30 (160) 4.04 (102) 4.24 (108) 0.55 (14) 


Table 73. VCS Tri-clamp In-Line Seal Dimensions (1) 

Pipe Size Inner Diameter “A” Groove Diameter “B” Flange Diameter “C” Outer Diameter “D” 

1-in. (1) 0.87 (22) 1.72 (44) 1.99 (51) 2.33 (59) 

1½-in. 1.37 (35) 1.72 (44) 1.99 (51) 2.73 (69) 

2-in. 1.87 (48) 2.22 (56) 2.52 (64) 3.19 (81) 

3-in. 2.87 (73) 3.28 (83) 3.58 (91) 4.14 (105) 

4-in. 3.82 (97) 4.35 (110) 4.69 (119) 5.06 (129) 


141


Figure 19. SVS Varivent Compatible Connection Seal 

Figure 20. SHP Cherry-Burrell “I” Line Seal 

Table 74. SHP Cherry-Burrell “I” Line Seal Dimensions (1) 

Size Outer Diameter “A” Extension Diameter “B” 

2-in. (1) 2.64 (67) 2.24 (57) 

3-in. 3.88 (98) 3.31 (84) 

Figure 21. SLS Hygienic Dairy Process Connection Female Thread Seal per DIN 11851 

142 



00813-0100-4016, Rev MB 


Table 75. SLS Hygienic Dairy Process Connection Female Thread Seal per DIN 11851 Dimensions 

Female Process Size / Hub Diameter “A” “B” Thread Diameter Hub Height “D” “E” 

Thread Rating 

“C” 

DIN 11851 DN 40 PN 40 1.89 (48) (1) 2.20 (56) Rd 65 X 1 /6-in. 1.18 (30) 0.39 (10) 

DN 50 PN 25 2.40 (61) 2.70 (69) Rd 78 X 1 /6-in. 1.22 (31) 0.43 (11) 



00813-0100-4016, Rev MB 


Figure 22. WSP Saddle Seal 

Table 76. WSP Saddle Seal Dimensions (1) 


Size Overall Height “A” Inner Diameter “B” Outer Diameter 

Bolt Circle Diameter “D” 

“C” 

6 Bolts 8 Bolts 

2-in. (1) 

2.72 (69) 1.50 (38) 2.50 (64) 2.99 (76) 2.91 (74) 

3-in. 2.46 (63) 2.01 (51) 3.02 (77) 2.99 (76) 2.91 (74) 

4-in. and larger 2.60 (66) 2.01 (51) 3.00 (76) 2.99 (76) 2.91 (74) 


143


Figure 23. UCP and PMW Threaded Pipe Mount Seals 

Table 77. UCP and PMW Threaded Pipe Mount Seals Dimensions (1) 

144 

UCP 

PMW 


Size Overall Diameter “A” Diameter “B” Diaphragm 



00813-0100-4016, Rev MB 


Sleeve Inner 


Sleeve 1-in. Pipe 1.50 (38) 1.32 (34) 0.84 (21) 1.04 (26) 1 

Threaded M44 X 1.25 2.37 (60) 1.38 (35) 1.32 (32) — — 

(1) Dimensions are in inches (millimeters) 

1.06 

# of Bolts


00813-0100-4016, Rev MB 


Figure 24. CTW Chemical Tee Seal 

Figure 25. TFS Wafer Style In-Line Seal 

Table 78. TFS Wafer Style In-Line Seal Dimensions (1) 


Pipe Size Flange Face Diameter “A” Outer Diameter “B” Inner Diameter “C” 

1-in. (1) 

2.00 (51) 2.64 (67) 1.090 (28) 

1 1 /2-in. 2.88 (73) 3.23 (82) 1.61 (41) 

2-in. 3.62 (92) 3.74 (95) 2.07 (52) 

21 /2-in. 4.12 (105) 4.21 (107) 2.48 (63) 

3-in. 5.00 (127) 5.00 (127) 3.07 (78) 

4-in. 6.19 (157) 6.19 (157) 4.00 (102) 

DN25 2.68 (68) 2.72 (69) 1.09 (28) 

DN40 3.46 (88) 3.46 (88) 1.61 (41) 

DN50 4.02 (102) 4.09 (104) 1.99 (51) 

DN80 5.43 (138) 5.47 (139) 3.24 (82) 

DN100 6.38 (162) 6.46 (164) 4.22 (107) 



145


Figure 26. WFW Flow-Thru Flanged Seal 

Table 79. WFW Flow-Thru Flanged Seal Dimensions (1) 

Class Nominal 

Pipe Size 

146 

Overall Length 

“A” 


Upper to 

Centerline Height 

“B” 

Bolt Circle 


Outside Diameter 

“D” 


00813-0100-4016, Rev MB 


Bolt Hole 


Flange 

Thickness “F” 

150 lb. 1-in. 7.00 (178) (1) 

2.40 (61.0) 3.12 (79) 4.25 (108) 0.62 (16) 0.50 (13) 

2-in. 9.00 (229) 3.31 (84) 4.75 (121) 6.00 (152) 0.75 (19) 0.69 (18) 

3-in. 11.00 (279) 3.61 (92) 6.00 (152) 7.50 (191) 0.75 (19) 0.88 (22) 



00813-0100-4016, Rev MB 



147


Standard Terms and Conditions of Sale can be found at www.rosemount.com\terms_of_sale 

The Emerson logo is a trade mark and service mark of Emerson Electric Co. 

Rosemount , Instrument Toolkit, and the Rosemount logotype are registerd trademarks of Rosemount Inc. 

Coplanar and Tuned-System Assemblies are trademarks of Rosemount Inc. 

Instrument Toolkit is a registered trademark of Emerson Process Management. 

Varivent is a registered trademark of Tuchenhagen GmbH. 

Flourocarbon (FMK) and Teflon are registered trademarks of E.I. duPont de Nemours & Co. 

Syltherm, and D.C. are regiastered trademarks of Dow Corning Corp. 

Tri-Clamp is a registered trademark of Tri-Clover, Inc. of the Alfa-Laval Group. 

Thermo-Tork is a registered trademark of Armstron World Industries, Inc. 

Neobee M-20 is a registered trademark of Stepan Chemical Co. 

Windows is a registered trademark of Microsoft Corp. 

Cherry-Burrell is a trademark of the United Dominion Industries. 

The 3-A symbol is a registered trademark of the 3-A Sanitary Standards Symbol Council. 

Many other special order transmitter/seal configurations, materials and fill fluids are available that are not covered in this document. Contact 

your Emerson Process Management representative or consult factory for additional information. 

Emerson Process Management 

Rosemount Measurement 

8200 Market Boulevard 

Chanhassen MN 55317 USA 

Tel (USA) 1 800 999 9307 

Tel (International) +1 952 906 8888 

Fax +1 952 906 8889 

00813-0100-4016 Rev MB, 9/12 

Rosemount Level Solutions 

Emerson provides a complete range of Rosemount products for level measurement applications. 

Pressure – Level or Interface Measurement 

Flexible mounting for liquid tank levels, including those with wide 

temperature and pressure requirements. Can be isolated by 

valves. Unaffected by: vapor space changes, surface conditions, 

foam, corrosive fluids, internal tank equipment. Optimize 

performance with direct mount, Tuned-System Assemblies: 

• Rosemount DP Level Transmitters and Remote Seals 

• Rosemount 3051SAL, 3051L, and 2051L Liquid Level 

Transmitters 

Vibrating Fork Switches – Point Level Detection 

The Rosemount 2100 Series is developed for reliable point level 

detection of liquids and consists of: 

• Rosemount 2110 Compact Vibrating Fork Liquid Level Switch 

• Rosemount 2120 Full-featured Vibrating Fork Liquid Level 

Switch 

Guided Wave Radar – Level and Interface Measurement 

Multivariable, loop-powered Guided Wave Radar transmitters 

with a wide range of probe styles to fit different liquids and solids 

applications. The product line consists of: 

• Rosemount 3300 Series – Versatile and easy-to-use 

transmitter with proven reliability 

• Rosemount 5300 Series – Accurate, superior performance 

transmitter with FOUNDATION fieldbus support 

Emerson Process Management 

Blegistrasse 23 

P.O. Box 1046 

CH 6341 Baar 

Switzerland 

Tel +41 (0) 41 768 6111 

Fax +41 (0) 41 768 6300 

Emerson FZE 

P.O. Box 17033 

Jebel Ali Free Zone 

Dubai UAE 

Tel +971 4 811 8100 

Fax +971 4 886 5465 


00813-0100-4016, Rev MB 


Non-contacting Radar – Level Measurement 

The Rosemount non-contacting radar family consists of: 

• Rosemount 5400 Series Transmitters – Loop-powered superior 

performance transmitter with a wide range of antennas, for 

liquid level measurement in most applications and process 

conditions 

• Rosemount 5600 Series Transmitters – Power of 4-wire give 

maximum sensitivity and performance for solids, challenging 

reactors, rapid level changes and excessive process 

conditions. 

Non-contacting Ultrasonic – Level Measurement 

The Rosemount 3100 Series ultrasonic level transmitters provide 

continuous non-contacting level measurement of liquids. The 

range consists of: 

• Rosemount 3101 for simple continuous level measurement 

• Rosemount 3102 for continuous measurement with two integral 

relays for local control functionality 

• Rosemount 3105 Intrinsically safe certified version for 

hazardous areas 


Pte Ltd 

1 Pandan Crescent 

Singapore 128461 

Tel +65 6777 8211 

Fax +65 6777 0947 

Service Support Hotline : +65 6770 8711 

Email : Enquiries@AP.EmersonProcess.com

Rosemount DP Level Transmitters and 1199 Seal Systems

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?