Other combinations - Hellermann Tyton

1.7 

44 

Cable ties and fixings 

User guide for fixing ties 

W max. 

Application Arrowhead 

H max. 

H max. 

Arrowhead 

Fir Tree Mount 

H max. 

H max. 

Fir Tree 

Mount 

Rivet Wall 

Plug 

� � � 

� � � 

Screw 

Mount EdgeClip 

This fixing tie is based on an arrowhead offering high extraction forces. The arrowhead is 

securely in place when a click can be heard and felt by the user. 

Arrowhead with disc 

The disc minimises the ingress of dust, dirt and water. Furthermore a safe fixation inside the 

drill hole is assured that withstands pressure from various directions. 

Arrowhead with supporting legs 

Arrowhead fixings with supporting legs offer good and stable fixation in drilled holes. The 

supporting legs generate additional pressure to assure a firm and secure fixing while taking 

up any variation in panel thickness. These ties are also suitable in high vibration applications. 

Arrowhead without supporting legs 

The arrowhead design assures good fixation while utilising lowest possible space. 

Weld Stud 

Mount 

Fir Tree Mounts can be pushed into pre-punched holes easily in panels or threaded, blind 

holes based on the low insertion forces. The design is ideally suited for a wide range of 

sheet thicknesses. The disc on top of the fir tree covers the hole and minimises the ingress 

of dust, dirt and water. 

Date of issue: Juni 2012 

� 

�

Heavy Duty Application 


User guide for fixing ties 

Weld Stud Mount 

Various of the HellermannTyton weld stud mounts can easily be attached by hand 

(″soft push″) the design offers very low insertion forces that require no tools. 

The mounts can be removed by twisting to the left. 

SB9 and SB14 are based on ″hard push″ technology and require a hammer to be applied. 

Weld Stud Fixings with lateral adjustment 

The special oval shape of these mounts provides a 5-6 mm lateral adjustment to cater for 

any misalignment of the stud or incorrect positioning of ties on the cables. The bundle can 

therefore be moved when mounted. 

EdgeClip 

The EdgeClips are specifically designed to bundle and guide cable and wires on edges. Cost 

intensive drill holes for fixing are no longer required. EdgeClips are easily mounted by hand, 

the integrated metal clamp, securely keeping the clips on the edge. 

EdgeClip twistable 

Ideally suited for fixations where bundles need to be flexibly guided. Theses EdgeClips are 

available with facilities for 90° or 360° rotation. 

EdgeClip without metal clamp 

These EdgeClips are easily attached. The holding tap snaps into the drill hole securely. 

Cable & Hose Attachment 

Excellent solution for subsequent attachment of pipes and wires to installed tubes. 

These sturdy fixing ties can withstand vibrations. They are easy to apply and give a secure 

alignment to the bundle. There will be High tighteining torque through metal bushing. 

Two Piece Fixing Ties with Clip 

Coupler 

The Coupler is an article to connect two cable ties maximum for parallel bundling of tubes, 

harnesses or cables. Its design enables the cable ties to rotate up to 90° and allows flexible 

installations. 


1.7 

45

1.7 

46 


Fixing ties 

1-Piece Fixing Ties with 

Arrowhead, with Disc 

With a diverse range of fixing possibilities 

(from 4.4mm to 8.0mm hole diameters and 

0.5mm to 8.0mm panel thickness) this 

range of fixing ties is ideal for use in many 

different industries, including automotive, 

aerospace and panel building. 

Features and Benefits 

• Easy to install without the need for a tool 

• Arrowhead simply locks into place 

• Disc adjusts tie for pressures from various 

directions and minimises access of dust, 

dirt and water 

• Cable tie head always situated in a 

defined position 

• KSFT-types with specially rounded 

arrowhead minimise the assembly height 

Special design without a gap between head and 

bundle; T50MD7. 

Article-No. Type 

The flexible 'disc' adjusts to take up variations in panel thickness - ensuring 

a firm fixing at all times. 

T50SOSKSFT65E T50SOSKSFT62x122PT07-13 

Length 

(L) 

Width 

(W) 

1-Piece Fixing Ties with Arrowhead, with Disc for round holes 

Bundle 

Ø 

max. 

Min. 

Tensile 

strength 

for ties (N) 

Disc 

Ø 

Hole 

Ø 

Material specification 

please see page 21. 

T50SOSSFT6.5E 

Panel 

Thickness 

min. 

Panel 

Thickness 

max. Material Colour 

126-00075 T50SOSKSFT5.4E 156.0 4.6 35.0 225 16.0 5.2 - 5.6 0.7 1.3 PA66HS Black (BK) 

126-02300 T50SST5 170.0 4.6 31.0 225 16.2 6.1 - 6.5 0.7 1.5 PA66 Natural (NA) 

150-15395 T50SST5 170.0 4.6 31.0 225 16.2 6.1 - 6.5 0.7 1.5 PA66HS Black (BK) 

126-00017 T50SST5 170.0 4.6 31.0 225 16.2 6.1 - 6.5 0.7 1.5 PA66HS Black (BK) 

111-85850 T50MD7 225.0 5.0 59.0 225 16.0 6.8 - 7.2 1.2 2.0 PA66HS Black (BK) 

126-03102 T50SOSSFT6.5E 160.0 4.6 35.0 225 16.0 6.3 - 6.7 1.9 2.5 PA66HS Black (BK) 

126-00081 T50SOSKSFT65E 156.0 4.6 35.0 180 16.0 6.3 - 6.7 0.7 1.3 PA66HS Black (BK) 

126-00086 T50SOSSFT6.5S2-E 157.0 4.6 35.0 225 16.0 6.3 - 6.7 1.7 2.3 PA66HS Black (BK) 

111-85350 T50SD6 160.0 5.0 31.0 180 18.0 6.3 - 7.5 0.6 1.8 PA66HS Black (BK) 

1-Piece Fixing Ties with Arrowhead, with Disc, releasable 

111-85480 RT50SD6 160.0 5.0 31.0 180 18.0 6.3 - 7.5 0.6 1.8 PA66HS Black (BK) 

1-Piece Fixing Ties with Arrowhead, with Disc for oval holes 

126-00015 T50SDOP 160.0 5.0 30.0 225 22.0 6.2 x 12.2 0.7 2.0 PA66HS Black (BK) 

126-00119 T50SOSAH7X12U 166.5 5.1 50.0 225 15.2 x 20.2 7.0 x 12.0 0.6 3.6 PA66HS Black (BK) 

126-00120 T50ROSAH7x12U 216.5 5.1 50.0 225 15.2 x 20.2 7.0 x 12.0 0.6 3.6 PA66HS Black (BK) 

126-00141 T50SOSKSFT62x122PT0.7-1.3 153.5 4.6 35.0 225 16.0 x 21.0 6.2 - 12.2 0.7 1.3 PA66HS Black (BK) 

126-00143 T50SOSKSFT62x122PT0.7-1.3 90° 158.0 4.6 35.0 225 16.0 x 21.0 6.2 - 12.2 0.7 1.3 PA66HS Black (BK) 

126-00142 T50SOSKSFT62x122PT1.7-2.3 159.0 4.6 35.0 225 16.0 x 21.0 6.2 x 12.2 1.7 2.3 PA66HS Black (BK) 

126-00144 T50SOSKSFT62x122PT1.7-2.3 90° 159.0 4.6 35.0 225 16.0 x 21.0 6.2 x 12.2 1.5 2.3 PA66HS Black (BK) 

All dimensions in mm. Subject to technical changes. 

Date of issue: Juni 2012


Arrowhead, with Disc, sealed 

The parts are mainly used in the automotive 

industry, e.g. for door harnesses. 


• Easy to assemble without the need for a 

tool 


• Disc adjusts the tie for pressures from 

various directions 

• Cable tie head always situated in defined 

position 

• Cellular rubber seal minimises access of 

dust, dirt and water 

• T50SOSSFT6,5E-MD with lasered seal and 

T60SOSSFT6,5E-MD made from PA6.6 HS 

are tested acc. IEC60529 and fulfill IP67 




Fixing Ties, sealed, round holes 

Length 

(L) 

The additional seal protects against the ingress of moisture. 

One piece fixing tie with arrowhead and disc, standard design. 

T50SOSSFT6.5E-MDL T60SOSSFT65x130E-MD 

Width 

(W) 

Bundle 

Ø max. 

Min. 

Tensile 

strength 

for ties (N) 

Disc 

Ø 

Hole 

Ø 

Panel 

Thickness 

min. 


Fixing ties 

Panel 

Thickness 


126-03100 T50SOSSFT6.5E-MDL 160.0 4.6 35.0 225 16.0 6.3 - 6.7 0.6 1.8 PA66HS Green (GN) 

156-00264 T50SOSSFT6.5E-MDL 160.0 4.6 35.0 225 16.0 6.3 - 6.7 0.6 1.8 PA66HS Black (BK) 

156-00271 T50SOSSFT6.5-E-MDL 160.0 4.6 35.0 225 16.0 6.3 - 6.7 0.6 1.8 PA66HS Natural (NA) 

156-00379 T50XROSSFT6.5EMDL 200.0 4.6 45.0 200 16.0 6.25 - 6.75 1.2 2.1 PA66HS Black (BK) 

126-00065 T50S0SSFT65MSMD 163.0 4.6 35.0 180 16.0 6.25 - 6.75 0.7 1.6 PA66HS Natural (NA) 

Fixing Ties, sealed, oval holes 

126-00079 T60SOSSFT70x120-E-MD 157.5 5.5 30.0 300 16.0 x 22.0 7.0 x 12.0 0.7 2.0 PA66HS Black (BK) 



1.7 

47

1.7 

48 


Fixing ties 

1-Piece Fixing Ties with Arrowhead, 

with Disc in the strap 

These fixing ties are ideal for use in many 

different industries, including automotive, 




tool 


• Disc adjusts tie for pressures from various 




position 

• Bundle runs directly across fixing point 

• Simple assembly due to tab at the end of 

the head 



The 'tab' on the head of the tie makes it easy to locate and lift the head for assembly. 

T80RSFT 

T80RSFT with flexible disc 

Min. 

Panel Panel 

Tensile 

ThickThick- Length Width Bundle strength Disc Hole nessness Application 

Article-No. Type (L) (W) Ø max. for ties (N) Ø Ø min. max. Material Colour Tool 

150-15493 T80RSFT 190 4.6 45.0 355 24.4 5.7 - 6.3 1.0 3.5 PA66 Black (BK) 1–3, 5 

150-15498 T80RSFT 190 4.6 45.0 355 24.4 5.7 - 6.3 1.0 3.5 PA46 Grey (GY) 1–3, 5 




Arrowhead, with Wings 

For the bundling and fixing of cable harnesses, 

pipes and hoses in the automotive, 

aerospace, white goods industries and 

panel building. 



tool 


position 


• Supporting legs provide a secure and firm 

fixing in areas where space is limited 

• Variations for round and oval holes are 

available 

• “Ladder style” types are very flexible 



1-Piece Fixing Ties with Arrowhead, with Wings, releasable 


Length 

(L) 

Width 

(W) 


Fixing ties 

A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters. 

Bundle 

Ø max. 

Min. Tensile 

strength for 

ties (N) 

Hole 

Ø 

Panel 

Thickness 

min. 

Panel 

Thickness 


115-07010 RT50RSF 215 4.6 50.0 225 7.8 - 8.2 0.80 2.50 PA66 Black (BK) 

115-06960 RT50SFK 225 5.0 50.0 225 6.4 - 7.0 0.8 3.0 PA66 Black (BK) 

150-26100 FBS100 115 10.0 27.0 – 6.3 - 6.7 0.7 3.9 PA66 Black (BK) 

150-26180 FBS185 200 10.0 53.0 – 6.3 - 6.7 0.7 3.9 PA66 Black (BK) 



1.7 

49

1.7 

50 


Fixing ties 

1-Piece Fixing Ties with Arrowhead, with Wings 




Length 

(L) 

Width 

(W) 

Bundle 

Ø max. 

Min. Tensile 

strength for 

ties (N) 

Hole 

Ø 

1-Piece Fixing Ties with Arrowhead, with Wings, for Oval Holes 

Panel 

Thickness 

min. 

Panel 

Thickness 


111-85519 T18RSF 100 2.5 16.0 80 4.6 - 4.8 1.0 3.0 PA66 Natural (NA) 

111-85560 T18RSF 100 2.5 16.0 80 4.6 - 4.8 1.0 3.0 PA66W Black (BK) 

111-85739 T50SSFM 160 4.6 35.0 225 6.0 - 6.6 0.7 3.0 PA66 Natural (NA) 

126-01104 T50SSFM 160 4.6 25.0 225 6.0 - 6.6 0.7 3.0 PA66HS Natural (NA) 

126-00032 T50SSFM 160 4.6 35.0 225 6.0 - 6.6 0.7 3.0 PA66HS Black (BK) 

111-85729 T50RSFM 200 4.6 45.0 225 6.0 - 6.6 1.0 3.0 PA66 Natural (NA) 

111-85339 T50SSL5 135 4.6 27.0 225 6.1 - 6.5 0.8 2.7 PA66 Natural (NA) 

126-02204 T50SSL5 135 4.6 27.0 225 6.1 - 6.5 0.8 2.7 PA66HS Black (BK) 

111-85395 T50SSL5 135 4.6 27.0 225 6.1 - 6.5 0.8 2.7 PA46 Grey (GY) 

126-00005 T50SL5 165 4.6 34.0 225 6.1 - 6.3 0.8 2.7 PA66HIRHS Black (BK) 

111-85369 T50SL5 165 4.6 34.0 225 6.1 - 6.3 0.8 2.7 PA66 Natural (NA) 

126-00001 T50SL5 165 4.6 34.0 225 6.1 - 6.3 0.8 2.7 PA66HS Black (BK) 

111-85460 T50SL6 165 4.6 34.0 225 6.3 - 7.5 0.5 2.5 PA66 Black (BK) 

111-85479 T50SL7 165 4.6 34.0 225 6.9 - 7.1 0.8 2.5 PA66 Natural (NA) 

155-41102 T50SAH 160 4.6 25.0 225 6.3 0.7 3.0 PA66HS Natural (NA) 



Length 

(L) 

Width 

(W) 

Bundle 

Ø max. 

Min. Tensile 

strength for 

ties (N) 

Hole 

Ø 

Panel 

Thickness 

min. 

Panel 

Thickness 


150-48396 T80RFT6X12 228 4.6 45.0 225 6.3 x 12.3 0.6 3.0 PA66 Black (BK) 

150-48397 T80RFT6X12 228 4.6 45.0 225 6.3 x 12.3 0.6 3.0 PA46 Grey (GY) 



1-Piece Fixing Ties with Arrowhead, 

with Wings in the strap 

• T80RSF6.5F 

• T80RSF6.5FW with rib for convoluted 

tubes 

This range of fixing ties is ideal for use in 

many different industries, including automotive, 


The T80RSF6.5FW feature a detent that fits 

securely into the profile of the tubing which 

assists from preventing lateral movement 

and slipping of the tubing. 



tool 


• Supporting legs provide a secure and firm 

fixing in areas where space is limited 

• Bundle runs central across fixing point 


position 

• For parallel routing of two bundles 



Designed to secure battery cables the T80RSF6.5F offers a simple and secure fixing. 

T80RSFT6.5FW 

T80RSF6.5F 


Fixing ties 

Min. Tensile 

Panel Panel 

Length Width Bundle strength for Hole Thickness Thickness 


(L) (W) Ø max. ties (N) Ø min. max. Material Colour 

126-02600 T80RSF6.5F 209 4.6 45.0 300 6.3 - 6.5 0.6 3.0 PA66HS Black (BK) 

150-39395 T80RSF6.5F 209 4.6 45.0 300 6.3 - 6.5 0.6 3.0 PA46 Grey (GY) 

150-39385 T80RSF6.5FW 209 4.6 45.0 300 6.3 - 6.5 0.6 3.0 PA66HS Black (BK) 



1.7 

51

1.7 

52 


Fixing ties 


Arrowhead 

The arrowhead designs allows these fixing 

ties to be used in areas with limited space. 



tool 

• Fixing tie with arrowhead without legs 



position 



The arrowhead designs allows these ties to be used in areas with limited space. 

T30RSF(U) 

T50RSF(E) 

Min. Tensile 

Panel Panel 

Length Width Bundle strength for ties Hole Thickness Thickness 

Article-No. Type (L) (W) Ø max. (N) 

Ø min. max. Material Colour 

111-85603 T30RSF(U) 161 3.6 31.0 135 4.8 - 5.6 0.9 2.4 PA66 Natural (NA) 

111-85610 T30RSF(U) 161 3.6 31.0 135 4.8 - 5.6 0.9 2.4 PA66HS Black (BK) 

111-85799 T50RSF(E) 210 4.6 50.0 225 6.2 - 6.4 2.9 3.0 PA66 Natural (NA) 

126-01001 T50RSF(E) 210 4.6 50.0 225 6.2 - 6.4 2.9 3.0 PA66 Black (BK) 


Please note! Not all products listed on this page may have this approval. 

For product specific approvals please refer to the Appendix. 



Arrowhead, with Disc 

Primarily designed for fixing cable harnesses 

in the automotive industry, their simplicity 

and ease of use has resulted in these parts 

being used in other industries, for example: 

aviation, switch-gear manufacturers, white 

goods manufacturers. 


• Pre-assembled 2-piece fixing tie with 

arrowhead foot part 

• Cable tie head can be moved after 

bundling 

• Easy to assemble without the need for 

a tool 


• Disc adjusts tie for pressure from various 





2-Pieces Fixing Ties with Arrowhead, with Disc, sealed 

2-Pieces Fixing Ties with Arrowhead, for Oval Holes 


Fixing ties 

Being a two piece assembly allows the tie head to be located in the most convenient position. 

Min. 

Panel Panel 

Tensile 

ThickThick- Length Width Bundle strength Disc Hole nessness Material Material 


(L) (W) Ø max. for ties (N) Ø Ø min. max. Cable Tie Foot Part 

150-37799 T50ROSSFT6.5 16-3MD 200 4.6 45.0 225 16.0 6.3 - 6.7 2.5 3.5 PA66HS PA66HIRHS 

150-93100 T50ROSSFT6.5ZD 16-2 200 4.6 45.0 225 16.0 6.3 - 6.7 0.7 2.0 PA66HS PA66HIRHS 

155-42002 T50ROSSFT6.5-16-2-BK 200 4.6 45.0 225 16.0 6.3 - 6.7 0.7 1.2 PA66HS PA66HIRHS 


Min. 

Panel Panel 

Tensile 

ThickThick- Length Width Bundle strength Hole nessness Material Material 


(L) (W) Ø max. for ties (N) Ø min. max. Cable Tie Foot Part 

156-00446 T50RFT62x122HR 200 4.6 45.0 225 6.3 x 12.2 0.6 3.0 PA46 PA46 

150-37591 T50RFT6OVAL 200 4.6 45.0 225 6.3 x 12.2 0.6 3.0 PA66HS PA66HIR 



1.7 

53

1.7 

54 


Fixing ties 

T50SSFT6.5 

SFT6.5 16-3 

Being a two piece assembly allows the tie head to 

be located in the most convenient position. 

T50RSFT6.5D18 

SFT6.5 16-2 

2-Piece Fixing Ties with Arrowhead, with Disc 

2-Pieces Fixing Ties with Arrowhead, for parallel routing 

! 

Other dimensions are 

available on request. 

Min. 

Panel Panel 

Tensile 

ThickThick- Length Width Bundle strength Disc Hole nessness Material Material 


(L) (W) Ø max. for ties (N) Ø Ø min. max. Cable Tie Foot Part 

150-13593 T50SSFT6.5 150 4.6 31.0 225 22.4 6.3 - 6.7 0.7 2.0 PA66HS PA66HS 

150-13591 T50RSFT6.5 200 4.6 45.0 225 22.4 6.3 - 6.7 0.7 2.0 PA66HS PA66HS 

117-05160 T50RDHSFT6.5 210 4.7 45.0 225 22.4 6.3 - 6.7 0.7 2.0 PA66HS PA66HS 

150-13596 T80ISFT6.5 300 4.6 81.0 355 22.4 6.3 - 6.7 0.7 2.0 PA66HS PA66HS 

150-37691 T50RSFT6.5D18 200 4.6 45.0 225 18.0 6.5 - 6.8 0.4 1.6 PA66HS PA66HIRHS 

150-37791 T50ROS-SFT6.5 16-3 200 4.6 45.0 225 16.0 6.3 - 6.7 2.5 3.5 PA66HS PA66HIRHS 

150-37792 T50RSFT6.5 16-3 200 4.6 45.0 225 16.0 6.3 - 6.7 2.5 3.5 PA66HS PA66HIRHS 

150-93130 T50SOSSFT65162OD 150 4.6 35.0 225 16.0 6.3 - 6.7 1.5 2.2 PA66HS PA66HIRHS 




Min. 

Panel Panel 

Tensile 

ThickThick- Length Width Bundle strength Hole nessness Material Material 


(L) (W) Ø max. for ties (N) Ø min. max. Cable Tie Foot Part 

156-00133 T50SOSDSFT6.5 150 4.6 35.0 225 6.3 - 6.7 0.7 1.5 PA66HS PA66HIRHS 



2-Pieces Fixing Ties with 

Arrowhead, with Disc for high 

temperature applications 

• T50ROSP1SFT6.5 for panel thickness 

0.7 - 1.3 mm 

• T50ROSP2SFT6.5 for panel thickness 

1.7 - 2.3 mm 

The Fixing-Ties with P1SFT6,5 and 

P2SFT6,5 are ideal when the requirements 

for temperature or chemical resistance are 

very high. They are used for cable harnesses 

in the automotive industry. 



arrowhead foot part 


bundling 


a tool 





Features material PEEK: 

• -55 °C to 240 °C operating temperature 

• Excellent resistance against chemicals and 

gamma radiation 



Peek FixingTies can be used for small diameters from 1.0 mm. 

Please note! Not all products listed on this page may have this approval. 

For product specific approvals please refer to the Appendix. 


Fixing ties 

Length Width Bundle Min. Tensile strength Hole 

Panel 

Panel 

Article-No. Type (L) (W) Ø max. for ties (N) 

Ø Thickness min. Thickness max. 

156-00455 T50ROSP1SFT65 200 4.6 45.0 225 6.3 - 6.7 0.7 1.3 

156-00456 T50ROSP2SFT65 200 4.6 45.0 225 6.3 - 6.7 1.7 2.3 


Material 

Cable Tie 

Material Foot 

Part 

Colour 

Cable Tie 

Colour 

Foot Part 

PA46 PEEK Grey (GY) Beige (BGE) 

PA46 PEEK Grey (GY) Beige (BGE) 



1.7 

55

1.7 

56 


Fixing ties 

1-Piece Fixing Ties with Fir Tree, 

with Disc 


in the automotive industry their simplicity, 

and ease of use, has seen these parts used 

in everything from aircraft, to switch-gear, 

to washing machines. 



position 


tool 




• Fir tree foot part can be used for a variety 

of panel thicknesses 

• Suitable for use within threaded holes 

• DOP versions for oval holes feature antitwist 

protection 

One piece fixing tie with fir tree mount, standard design. 

T50SOSFT6LGE 

Special design without a gap between head and bundle; FT220DP7. 

T50SOSFT6E2 T50SOSFT6D10E T50SOSFT6LGE 

T50SOSFT8E 



Min. Tensile 

strength 

Panel Panel 

Length Width Bundle for ties Disc Hole Thickness Thickness 

Article-No. Type (L) (W) Ø max. (N) Ø Ø min. max. Material Colour 

150-55610 T18RDP5 110.0 2.5 20.0 80 13.0 4.9 - 5.1 3.0 4.0 PA66 Black (BK) 

157-00033 T50SOSFT6E1 160.0 4.7 35.0 150 16.0 6.3 - 7.0 0.7 3.0 PA66HS Black (BK) 

157-00085 T50SOSFT6-E2 160.0 4.6 35.0 180 16.0 6.3 - 7.0 0.6 4.2 PA66HS Black (BK) 

157-00045 T50SOSFT6D10E 163.0 4.6 32.0 225 10.0 5.8 - 6.2 0.8 5.5 PA66 Black (BK) 

157-00028 T50SOSFT6D10E 163.0 4.6 32.0 225 10.0 5.8 - 6.2 0.8 5.5 PA46 Grey (GY) 

157-00042 T50SOSFT6LGE 165.0 4.6 35.0 180 16.0 6.3 - 7.0 0.7 7.0 PA66HS Black (BK) 

150-01700 FT220DP7 230.0 4.7 40.0 225 16.0 6.8 - 7.2 0.8 5.0 PA66 Black (BK) 

157-00072 T50SOSFT8E 163.0 4.6 35.0 225 16.0 8.0 - 8.5 0.6 6.0 PA66HS Black (BK) 

157-00115 T50SOSFT8E 163.0 4.6 35.0 225 16.0 8.0 - 8.5 0.6 6.0 PA46 Grey (GY) 



1-Piece Fixing Ties with Fir Tree, with Disc, releasable 

One piece fixing tie with fir tree mount, standard design. 

1-Piece Fixing Ties with Fir Tree, with Disc, for Oval Holes 

T50SOS2DOP 

L 

W 


Fixing ties 

Min. Tensile 

Panel Panel 

Length Width Bundle strength for ties Disc Hole Thickness Thickness 

Article-No. Type (L) (W) Ø max. (N) 

Ø Ø min. max. Material Colour 

150-55500 REL30SDP6 170.0 5.0 31.0 135 22.0 6.3 - 7.0 3.0 7.0 PA66 Black (BK) 




Min. 

Tensile 

Panel Panel 

strength 

ThickThick- Length Width Bundle for ties Disc Hole nessness Article-No. Type 

(L) (W) Ø max. (N) Ø Ø min. max. Material Colour 

157-00014 T50SOS2DOP 165.0 4.6 35.0 225 16.0x21.0 6.2 x 12.2 0.6 6.0 PA66HIRHS Black (BK) 

157-00069 T50SOS2DOP 165.0 4.6 35.0 225 16.0x21.0 6.2 x 12.2 0.6 6.0 PA46 Grey (GY) 

157-00016 T50SOS3DOP65130E 165.0 4.6 35.0 180 16.0x21.0 6.5 x 13.0 0.7 5.0 PA66HIRHS Black (BK) 

157-00053 T50SOSFT7X12U 165.0 5.1 35.0 225 15.2x20.2 7.0 x 12.0 0.6 4.0 PA66HS Black (BK) 

157-00054 T50ROSFT7X12U 216.0 5.1 50.0 225 15.2x20.2 7.0 x 12.0 0.6 4.0 PA66HS Black (BK) 



1.7 

57

1.7 

58 


Fixing ties 

2-Pieces Fixing Ties with 

Fir Tree, with Disc 


in the automotive industry their simplicity 

and ease of use, has resulted in these parts 

being used in many industries, for example: 

aviation, switch gear and white goods. 


• Pre-assembled 2-piece fixing tie with fir 

tree foot part 


bundling 


a tool 




• Fir tree foot part can be used for a variety 

of panel thicknesses 

• Suitable for use within threaded holes 

• DOP versions for oval holes feature 

anti-twist protection 



These Fir-Tree fixings can also be used in threaded, blind holes. 

One piece fixing tie with fir tree mount 

!Other combinations 

between cable tie and foot 

part available on request. 

T30RFT5 T50SOSFT5SD 

T18RFT6 T30RFT6SD 

Min. 

Tensile 

Panel Panel 

strength 

ThickThick- Length Width Bundle for ties Disc Hole nessness Material Material 

Article-No. Type (L) (W) Ø max. (N) Ø Ø min. max. Colour Cable Tie Foot Part 

150-55850 T30RFT5 150 3.6 34.0 135 16.0 4.5 - 5.0 0.7 3.0 Black (BK) PA66HS PA66HIRHS 

150-55948 T30RFT5 150 3.6 34.0 135 16.0 4.5 - 5.0 0.7 3.0 

Natural (NA), 

Grey (GY) 

PA46 PA46 


156-06200 T50SOSFT5 150 4.6 31.0 225 16.0 4.5 - 5.0 0.7 3.0 Black (BK) PA66HS PA66HIRHS 

156-00432 T50SOSFT5SD 150 4.6 35.0 225 16.0 4.5 - 5.0 0.7 3.0 Black (BK) PA66HS PA66HIRHS 

150-09110 T18RFT6 100 2.5 20.0 80 16.0 6.4 - 7.1 0.75 3.0 Black (BK) PA66 PA66 


150-77941 T50RFT6 200 4.6 45.0 225 16.0 6.4 - 7.1 0.75 3.0 Black (BK) PA66HS PA66 

150-77938 T50RFT6 200 4.6 45.0 225 16.0 6.4 - 7.1 0.75 3.0 Grey (GY) PA46 PA46 

150-77934 T80LFT6 390 4.6 108.0 355 16.0 6.4 - 7.1 0.75 3.0 Black (BK) PA66HS PA66HIRHS 

156-00076 T50ROSFT6 200 4.6 45.0 225 16.0 6.4 - 7.1 0.75 3.0 Black (BK) PA66HS PA66HIRHS 

150-77936 T50RDHFT6 210 4.7 19.0 225 16.0 6.4 - 7.1 0.75 3.0 Black (BK) PA66HS PA66HIRHS 

150-52690 T30RFT6SD 148.0 3.6 35.0 135 16.0 6.4 - 7.1 0.75 3.0 Black (BK) PA66HS PA66HIRHS 

156-05902 T50ROSFT6SD 200 4.6 45.0 225 16.0 6.4 - 7.1 0.75 3.0 Black (BK) PA66HS PA66HIR 

156-00085 T50ROSFT6SD 200 4.6 45.0 225 16.0 6.4 - 7.1 0.75 3.0 Grey (GY) PA46 PA46 



2-Pieces Fixing Ties with Fir Tree, with Disc 

T30RFT6LG 


T50SFT6LG1SD T50RFT6LGSDHEX T50IFT7 

Fixing ties 

T50RFT8 T50RFT8GSD T120IFT9 T50RFT10 

Min. 

Tensile 

Panel Panel 

strength 

ThickThick- Length Width Bundle Disc for ties Hole nessness Material Material 


(L) (W) Ø max. Ø (N) Ø min. max. Colour Cable Tie Foot Part 

150-31090 T30RFT6LG 150 3.6 35.0 16.0 135 6.4 - 7.1 0.75 6.0 Black (BK) PA66HS PA66HIRHS 

150-31091 T50RFT6LG 200 4.6 44.0 16.0 225 6.4 - 7.1 0.75 6.0 Black (BK) PA66HS PA66HIRHS 

150-31096 T80IFT6LG 300 4.6 81.0 16.0 355 6.4 - 7.1 0.75 6.0 Black (BK) PA66HS PA66HIRHS 

156-00154 T50SFT6LG1SD 160 4.6 30.0 16.0 225 6.5 - 7.0 0.6 6.0 Black (BK) PA66HS PA66HIRHS 

156-00399 T50RFT6LGSD-HEX 200 4.6 45.0 16.0 225 6.25 - 6.75 0.7 5.0 Black (BK) PA66HS PA66HIRHS 

111-85871 T50RFT7 200 4.6 44.0 16.0 225 6.5 - 7.0 0.8 7.0 Black (BK) PA66HS PA66HS 

150-00700 T50IFT7 300 4.6 81.0 16.0 225 6.5 - 7.0 0.8 7.0 Black (BK) PA66HS PA66HS 


156-00104 T40RFT8GSD 180 4.0 40.0 16.0 180 8.0 - 8.5 1.5 4.0 Black (BK) PA66HS PA66HIRHS 

133-00034 T50RFT8GSD 200 4.6 45.0 16.0 225 8.0 - 8.5 1.5 4.0 Black (BK) PA66HS PA66HIRHS 

156-00235 T50RFT8GSD 200 4.6 45.0 16.0 225 8.0 - 8.5 1.5 4.0 Grey (GY) PA46 PA46 

156-00200 T120IFT9 300 7.6 75.0 20.0 535 9.0 - 10.6 5.0 11.0 Black (BK) PA66HIR(S) PA66HIR(S) 


156-00120 T50ROSFT10 200 4.6 45.0 18.0 225 9.7 - 10.0 0.8 5.0 Black (BK) PA66HS PA66HIRHS 


2-Pieces Fixing Ties with Fir Tree, with Disc, for Oval Holes 

T50ROS1DOP 



Min. 

Tensile 

Panel Panel 

strength 

ThickThick- Material Material 

Length Width Bundle Disc for ties Hole nessness Cable Foot 


(L) (W) Ø max. Ø (N) Ø min. max. Colour Tie Part 

156-05908 T50ROSFT62x122 200 4.6 45.0 12.0 x 21.0 225 6.2 x 12.2 0.6 6.0 Black (BK) PA66HS PA66HIRHS 



1.7 

59

1.7 

60 


Fixing ties 

1-Piece Fixing Ties for Weld 

Studs 

• T50SOSSBH5E with plate to fix 

isolation material 


position 


tool 

• Can retain insulation materials while fixing 

a cable bundle 

T50SOSSBH5E 



• T50SOSSBS5OTE for cable routing 

above the stud 


position 


tool 

• Bundle runs directly above weld stud with 

defined stand-off from the panel 

T50SSBS50TE 

The new head design offers additional fixing of soft materials. 

Length Width Bundle Min. Tensile strength for ties Stud 

Article-No. Type (L) (W) Ø max. 

(N) 

Ø Material Colour 

155-05701 T50SOSSBH5E 165 4.6 35.0 225 5.0 PA66HS Black (BK) 


The T50SSBS50TE allows very precise routing of cable bundles. 



(N) 


155-30602 T50SSBS50TE* 160 4.6 35.0 200 5.0 PA66HS Black (BK) 

157-00083 T50SSBS6OT-E* 160.0 4.6 35.0 200 6.0 PA66HS Black (BK) 


* Since the bundled cables lie directly above or on the weld stud, care must be taken to ensure that the length of the weld stud does not exceed the height 

of the sheath. To avoid damage, we recommend a maximum weld stud length of 16.5 mm. 



Studs 


position 


• Bundles are routed very close to stud 

T50SOSSBS5E 

T50SOSSBD-M8 

T50SOSSBD-M10 



T50SOSSBU-M8 

T50SOSSBU-M10 

This outside serrated cable tie with weld stud mounting keeps the cables 

close to the fixing stud. 

T50SOSSBD-M8 

T50SOSSBD-M is made for bundles that runbelow the stud. 


Fixing ties 

Length Width Bundle Min. Tensile strength for ties Stud Mounting 


(N) 

Ø Screw Type Material Colour 

155-12300 T50SOSSBS5E 160.0 4.6 35.0 225 5.0 – PA66HS Black (BK) 

157-00039 T50SOSSBD-M8 175.0 5.7 30.0 150 – M8 PA66HSW Black (BK) 

157-00066 T50SOSSBU-M8 175.0 5.7 30.0 150 – M8 PA66HSW Grey (GY) 

157-00040 T50SOSSBD-M10 175.0 5.7 30.0 150 – M10 PA66HSW Black (BK) 

157-00067 T50SOSSBU-M10 175.0 5.7 30.0 150 – M10 PA66HSW Grey (GY) 



1.7 

61

1.7 

62 


Fixing ties 

1-Piece Fixing Ties for Weld, 

moveable 

• WSP-Serie 


position 


• Provides a 5 – 6 mm lateral adjustment 

possibility 

• Very low profile, stackable design 

• For bundles which need to be routed in 

different directions 

T50SOSWSP5E-2 T50SOSWSP5E, parallel installation using two fixing ties. 



• T50SOSSB5-High-E-C-CC for 

5 and 6 mm studs 

• T50SOSSB6HE for 6 mm studs 


position 


• Provides a 5 – 6 mm lateral adjustment 

possibility 

T50SOSSB5-High-E-C-CC 

T50SOSSB5-High-E-C-CC 

T50SOSSB6HE 

T60ROSSBH6HEC 



(L) (W) Ø max. 

(N) 


157-00037 T50SOSSB5-High-E-C-CC 167.0 5.0 35.0 225 5.0, 6.0 PA66HS Black (BK) 

155-46302 T50SOSSB6HE 160.0 4.6 35.0 170 6.0 PA66HS Black (BK) 

157-00101 T60ROSSBH6HEC 227.4 5.5 55.0 300 6.0 PA66HS Black (BK) 

133-00391 T50SOSWSP5E-2 163.0 4.6 35.0 200 5.0 PA66HS Black (BK) 




Studs 

• LFC-Series for routing close to the stud 


• 1-piece fixing tie for 5 mm studs 


position 


• Bundle runs very close next to stud 

• Closed stud retainer protects the bundle 

against damage 

• Contact surface allows secure bundling 

with tensioning tool 


Studs, for Heavy Duty 

Applications 

• WS-Series for 6.35 mm threaded studs 

• WSI380 for 9.525 mm threaded studs 

Wide strap stud-mounted cable ties are 

primarily designed for use in the automotive 

or truck industry. 


• Very flexible strap and minimum pinching 

of soft hoses and convoluted tubing 

• Low profile head for compact bundling 

• Clamping rails to increase grip on round 

bundles 

• Flexible hinge 

LFC165-2 for bundle diamters up to 35.0 mm 

The wide strap stud mount cable tie minimizes pinching on soft bundles. 

Wide Strap Heavy Duty Stud Mount Cable Ties 


Fixing ties 

LFC165-2 can be put on by 

hand. 

Length Width Bundle Stud Min. Tensile strength for ties 


(L) (W) Ø max. Ø 

(N) Material Colour 

157-00047 LFC165-2 165 4.7 35.0 5.0 150 PA66HS Black (BK) 

155-34202 LFC165(PSA) 165 4.7 35.0 5.0 90 PA66HS Black (BK) 

131-60070 LFC155 163 4.7 26.0 5.0 160 PA66 Black (BK) 


Length Width Bundle Stud Min. Tensile strength for ties 

Article-No. Type (L) (W) Ø max. Ø 


157-00400 WSS250 246.4 12.7 57.1 6.35 534 PA66HIRHS Black (BK) 

157-00401 WSI250 322.6 12.7 82.5 6.35 534 PA66HIRHS Black (BK) 

157-00402 WSR250 398.8 12.7 104.8 6.35 534 PA66HIRHS Black (BK) 

157-00404 WSI380 322.6 12.7 82.5 9.525 534 PA66HIRHS Black (BK) 





1.7 

63

1.7 

64 


Fixing ties 

1-Piece Fixing Ties for Weld Studs 

(Softpush) in the strap 


• For 5mm studs or 5mm ISO threaded 

studs 

• “Soft-push” versions for easy assembly, 

without tool 

• “Hard-push” versions for special firm fit 

need to be hammered onto the stud 

• Releasable types: RT50RS5 and SB 




Length 

(L) 

Width 

(W) 

With the RT50RS5 and the SB14/172 you can mount pipes or cables to a 

weldstud. 

Simple fixing to a weld stud or 5mm ISO bolt. 

Height 

(H2) 

1-Piece Fixing Ties for Weld Studs (Softpush) in the strap 

Bundle 

Ø max. 

Min. Tensile strength for ties 


111-07110 T50RS5 190 4.6 14.5 40.0 225 PA66 Black (BK) 

1-Piece Fixing Ties for Weld Studs (Softpush) in the strap, releasable 

115-07110 RT50RS5 190 4.6 14.5 40.0 225 PA66 Black (BK) 

150-10901 SBS9/230 230 5.0 10.0 60.0 245 PA66 Black (BK) 

1-Piece Fixing Ties for Weld Studs (Hardpush) in the strap, releasable 

150-10900 SB9/230 230 5.0 10.0 60.0 245 PA66 Black (BK) 

150-10690 SB14/172 172 5.0 15.5 40.0 245 PA66 Black (BK) 

150-11400 SB14/230 230 5.0 15.5 60.0 245 PA66 Black (BK) 




Studs, releasable, with flexible 

strap 


• Releasable 

• FBB-types for 5mm studs or 5mm ISO 

threaded studs 

• SBR8S for M8 threaded studs 

• “Soft-push” versions for easy assembly, 

without tool 

• “Hard-push” versions for special firm fit 

need to be hammered onto the stud 

• The versions FBB_M have a little recess 

for eventually welding burrs on the 

substructure 




Length 

(L) 

1-Piece Fixing Ties for Weld Studs (Softpush), releasable, with flexible strap 


Fixing ties 

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction. 

150-28140 FBB140 145 10.0 38.0 – PA66 Black (BK) 

150-29100 FBB100M 110 10.0 23.0 – PA66 Black (BK) 



1-Piece Fixing Ties for Weld Studs (Hardpush) , releasable 

131-60060 SBR5 220 6.0 40.0 300 PA66HS Black (BK) 

131-60058 SBR8S 215 6.0 40.0 300 PA46 Grey (GY) 


Width 

(W) 

Bundle 

Ø max. 




1.7 

65

1.7 

66 


Fixing ties 


Studs, for Heavy Duty 

Applications, for parallel routing 

Primarily designed for use in the automotive 

industry, these parts can be used in a wide 

variety of applications where weld studs 

ISO bolts are used and cables need to be 

bundled and secured. 


• For parallel routing of cables, wires and 

hoses 

• Minimum pinching of soft hoses and 

convoluted tubing 


• DCT9 and DCT11 are releasable 

• SDCTR312 for defined standoff to 

substructure 



Standoff Mounting Dual Clamp Ties. 

Dual Clamp Ties 

Standoff Mounting Dual Clamp Ties 



(N) 


115-00034 DCT9 330.0 12.7 33.0 670 6.35 PA66HIR Black (BK) 

115-00033 DCT11 489.0 12.7 58.0 670 6.35 PA66HIR Black (BK) 

117-00012 SDCTR312 511.0 12.7 58.0 445 8.0 PA66HIRHSW Black (BK) 




Studs 

Series SBH5 and SBH5SD are used mainly 

in the automotive industry. The SD variant 

is for the smallest bundle diameters, from 

1.0 mm. Series SB5 and SBS5 are suitable 

for bundling and fastening cable looms 

and pipes in switch cabinet construction 

and automotive and construction machine 

industry. 


• Pre-assembled 2-piece fixing tie with stud 

retainer 


bundling 


• SB5-types for 5mm studs or 5mm ISO 

threaded studs 

• Types with discs can retain insulation 

materials while fixing a cable bundle 

• Oval shape can be adjusted in a lateral 

position 

• GBS8C for 8 mm retainer enables parallel 

routing 

2-Piece Fixing Ties for Weld Studs, moveable 


Length 

(L) 

Cable ties illustrating the variety of application methods for weld stud fixing. 

Width 

(W) 



Bundle 

Ø max. 

SB5 


(N) 

Material 

Cable Tie 

SB5CSD 


Fixing ties 

Material 

Foot Part 

Application 

Tool 

150-10140 T30RSB5 150 3.5 31.0 135 PA66HS POM 1–3, 5 

150-10144 T50SSB5 150 4.6 31.0 225 PA6HS PA66HS 1–5 

150-10141 T50RSB5 200 4.6 45.0 225 PA66HS POM 1–5 

156-00084 T50RSB5 200 4.6 45.0 225 PA46 PA46 1–5 

156-00080 T50SOSSB5 150 4.6 31.0 225 PA66HS POM 1–5 

150-10149 T50ROSSB5 200 4.6 45.0 225 PA66HS POM 1–5 

156-00083 T50RSB5CSD 200 4.6 45.0 225 PA66HS PA66HS 1–5 

156-05906 T50ROSSB5CSD 200 4.6 45.0 225 PA66HS PA66HS 1–5 



1.7 

67

1.7 

68 


Fixing ties 

2-Piece Fixing Ties for Weld Studs 




Length 

(L) 

Width 

(W) 

Bundle Ø 

max. 

SBS5 

2-Piece Fixing Ties for Weld Studs, with disk 

T50ROSGBS8C-B 

SBH5 

SBH5SD 

Min. Tensile strength 

for ties (N) 

Material 

Cable Tie 

Material 

Foot Part 

SBH6SD SBH5SD-14 

Application 

Tool 

150-21290 T30RSBS5 150 3.5 31.0 135 PA66HS PA66HS 1–3, 5 

150-21293 T50SSBS5 150 4.6 31.0 225 PA66HS PA66HS 1–5 

150-21291 T50RSBS5 200 4.6 45.0 225 PA66HS PA66HS 1–5 

150-21297 T80ISBS5 300 4.6 81.0 355 PA66HS PA66HS 1–5 

156-00079 T50SOSSBS5 150 4.6 31.0 225 PA66HS PA66 1–5 

150-21299 T50ROSSBS5 200 4.6 45.0 225 PA66HS PA66HS 1–5 

L 

156-00251 T50ROSGBS8CA 200 4.6 45.0 225 PA66HS PA66HIRHS 1-5 

156-00252 T50ROSGBS8CB 200 4.6 45.0 225 PA66HS PA66HIRHS 1-5 

156-00116 T50ROSGBS8CC 200 4.6 45.0 225 PA66HS PA66HIRHS 1-5 



Length 

(L) 

Width 

(W) 

Bundle 

Ø max. 

Min. Tensile strength 

for ties (N) 

Disc 

Ø 

Material 

Cable Tie 

Material 

Foot Part 

Application 

Tool 

150-16941 T30RSBH5 150 3.5 31.0 135 30.0 PA66HS PA66HS 1–3, 5 

150-16943 T50RSBH5 200 4.6 45.0 225 30.0 PA66HS PA66HS 1–5 

150-16945 T80ISBH5 300 4.6 81.0 355 30.0 PA66HS PA66HS 1–5 

150-92904 T50RSBH5-SD 200 4.6 45.0 225 30.0 PA66HS PA66HS 1–5 

150-92905 T80ISBH5SD 300 4.6 78.0 355 30.0 PA66HS PA66HS 1–5 

156-05905 T50ROSSBH5SD 200 4.6 45.0 225 30.0 PA66HS PA66HS 1–5 

150-77591 T50R-SBH5SD-14 200 4.6 45.0 222 30.0 PA66HS PA66HS 1–5 

156-00819 T50RSBH6SD 200 4.6 45.0 225 30.0 PA66HS PA66HS 1–5 




Studs, for parallel routing 

Many applications require cables to be run 

parallel to each other but separated to 

avoid abrasion. The double mounting base, 

when used with two cable ties allow this 

to be achieved simply and quickly. 


• Pre-assembled 2-piece fixing tie with stud 

retainer 

• For parallel routing of cables, hoses or 

harnesses 


bundling 


• For 5 mm studs or 5 mm ISO threaded 

studs 

! 

Other dimensions 




Parallel fixation of two cables. 

T50SDSBS5, T50ROSDSBS5 


Fixing ties 

Length Width Bundle 

Min. Tensile 

strength for ties Stud Material Material 

Application 

Article-No. Type (L) (W) Ø max. (N) Ø Cable Tie Foot Part Colour Tool 

150-56193 T50SDSBS5 150 4.6 31.0 225 5.0 PA66HS PA66HIRHS Black (BK) 1–5 

150-56199 T50ROSDSBS5 200 4.6 45.0 225 5.0 PA66HS PA66HIRHS Black (BK) 1–5 



1.7 

69

1.7 

70 


Fixing ties 

1-Piece Fixing Ties for Edges 

EdgeClip-Family 

These cable ties and Edge Clip assemblies are 

ideal for use where holes are not acceptable 

or where due to temperature problems 

adhesives will fail. These assemblies are 

widely used for fixing and bundling cables, 

pipes and hoses within the automotive 

industry, harness making, panel buidling 

and electrical industry. 


• Easy assembly, just clip on per hand 

• For edges of 1 – 3 mm or 3 – 6 mm 

• Integrated metal clamp holds clip firmly 

in place 

• Clamp consists of double tempered steel 

spring 

• Ideal for applications where holes or 

adhesives are not suitable 

T50ROSEC10 fitted onto a plastic panel to hold a door harness. 

T50ROSEC23 - the cable bundle runs parallel with 

the edge. 

! 

The silver-grey clamp, the heart of our 

EdgeClips, consists of double-tempered 

spring steel in accordance with DIN EN 

10132-4 C75S. The spring steel gives the 

clamp both the necessary rigidity to provide 

high pull-off forces and also sufficient 

flexibility for various possible applications. 

The double coating is applied initially with 

a zinc plate system followed by inorganic 

surface sealing. Naturally, no chromium (VI) 

is used in this process. The clamp therefore 

complies with the current EU Directive 


1-Piece-Fixing Tie T50SOSEC12 can be pushed 

easily on edges. 

200/53/EC on end of life vehicles and the 

prohibition on heavy metals. The refined 

spring-steel clamp also fulfils the requirements 

for resistance to salt spray stipulated 

in DIN EN ISO 9227 NSS (min. 840 h 

without corrosion of base metal) and 

DIN EN ISO 6270-Z-CH (min. 720 h 

without corrosion of base material). This 

solution has therefore been approved by 

many OEMs for exposed installation 

locations, e.g. in engine compartments 

and the running-gear area.

1-Piece Fixing Ties for Edges 

• EdgeClip-Family 



position 

• Suitable for minimum bundle diameters of 

1 mm 

• Outside serrated tie prevents bundle from 

being damaged 

• For edges of 1 – 3 mm 


Length 

(L) 

Width 

(W) 

Bundle 

Ø max. 

Min. Tensile 

strength for ties 

(N) 

Material 

Cable Tie 

Material 

Foot Part 

148-00200 T50SOSEC12E 160.0 4.6 35.0 180 PA66HS PA66HS 1–5 

126-00000 T50SOSEC13E 160.0 4.6 35.0 180 PA66HS PA66HS 1–5 

126-00036 T50SOSEC34E 155.0 4.6 35.0 180 PA66HS PA66HS 1-5 

133-00059 T40XEC5SP-E 85.0 4.0 15.0 178 PA66HS PA66HS 1-5 






Fixing ties 

!EdgeClips are also available 

on request for panel 

thickness from 4 - 7mm. 

Application 

Tool Drawing 

1.7 

71

1.7 

72 


Fixing ties 

2-Piece Fixing Ties for Edges, 

1,0 - 3,0 mm 




EdgeClip 


bundling 

• EC9, EC10, EC21 and EC22 are for 

minimum bundle diameters of 1 mm 





Min. Tensile 

strength for ties Material Material Application 

Article-No. Type (L) (W) Ø max. (N) Cable Tie Foot Part Tool Drawing 

150-76090 T30REC4A 150 3.5 32.0 135 PA66HS PA66HIRHS 1–3, 5 

150-76091 T50REC4A 200 4.6 45.0 225 PA66HS PA66HIRHS 1–10 

150-76093 T50SOSEC4A 150 4.6 35.0 225 PA66HS PA66HIRHS 1–5 

150-76099 T50ROSEC4A 200 4.6 45.0 225 PA66HS PA66HIRHS 1–5 

156-00570 T50ROSEC4A-W 200 4.6 45.0 225 PA66UV PA66UV 1–5 

150-76080 T30REC4B 150 3.5 32.0 135 PA66HS PA66HIRHS 1–3, 5 

156-00109 T50SOSEC4B 150 4.6 35.0 225 PA66HS PA66HIRHS 1–5 

150-76079 T50ROSEC4B 200 4.6 45.0 225 PA66HS PA66HIRHS 1–5 

156-00003 T30REC5A 150 3.6 33.0 135 PA66HS PA66HIRHS 1–3, 5 

150-40593 T50SOSEC5A 150 4.6 35.0 225 PA66HS PA66HIRHS 1–5 

150-40591 T50ROSEC5A 200 4.6 45.0 225 PA66HS PA66HIRHS 1–5 

150-40582 T50REC5B 200 4.6 45.0 225 PA66HS PA66HIRHS 1–10 

150-40583 T50SOSEC5B 150 4.6 31.0 225 PA66HS PA66HIRHS 1–5 

150-40581 T50ROSEC5B 200 4.6 45.0 225 PA66HS PA66HIRHS 1–5 

155-37104 T18REC9SD 100 2.5 20.0 80 PA66HS PA66HIRHS 1–5 

156-00019 T50SOSEC9SD 150 4.6 31.0 225 PA66HS PA66HIRHS 1–5 

156-05903 T50ROSEC9 200 4.6 45.0 225 PA66HS PA66HIRHS 1–5 

155-38304 T18REC10SD 100 2.5 20.0 80 PA66HS PA66HIRHS 1–3, 5 

156-00015 T50SOSEC10 150 4.6 31.0 225 PA66HS PA66HIRHS 1–5 


156-00017 T50SOSEC21 150 4.6 35.0 225 PA66HS PA66HIRHS 1–5 


156-00576 T50ROSEC22 200 4.6 45.0 225 PA66UV PA66HIRHS 1–10 





3,0 - 6,0 mm 




EdgeClip 


bundling 

• For minimum bundle diameters of 1 mm 



Length 

(L) 

!Other combinations 

between cable tie and 

foot part available on 

request. 

Width 

(W) 

Bundle 

Ø max. 

Min. Tensile 


(N) 

Material 

Cable Tie 



Material 

Foot Part 

156-04600 T18ROSEC19 100.0 2.5 20.0 80 PA66HS PA66HIRHS 1–3, 5 

156-04601 T50SOSEC19 150.0 4.6 31.0 225 PA66HS PA66HIRHS 1–5 

156-04602 T50ROSEC19 200.0 4.6 45.0 225 PA66HS PA66HIRHS 1–5 

156-00016 T50SOSEC20 150.0 4.6 35.0 225 PA66HS PA66HIRHS 1–5 







Fixing ties 

Application 

Tool Drawing 

1.7 

73

1.7 

74 


Fixing ties 


twistable 



EdgeClip 

• Easy to assemble by hand 


bundling 

• For edges of 1 – 2.5 mm or 1 – 3 mm 

• Can be rotated to the desired position 

during mounting 



CBT50R - the bundle can run above an edge. 

EdgeClip CBTO50R, rotatable 90°. 

EdgeClip CBT30MR, rotatable 360° 

CBTOS50RSTUD5 

Min. Tensile 

Panel 

Length Width Bundle strength for ties Material Material Thickness Application 


(L) (W) Ø max. (N) Cable Tie Foot Part max. Tool 

156-00049 CBT30MR 160 3.5 32.0 135 PA66HS POM 2.5 1–3, 5 

156-01601 CBTO50R 200 4.6 47.0 225 PA66HS PA66HIRHS 3.0 1–3, 5 

156-00380 CBTOS50RSTUD5 200 4.6 50.0 225 PA66HS PA66HIRHS 3.0 1–3, 5 




for Holes 

Ideal for use on 2.5 mm edges, the tie's 

reduced installation height makes it ideal 

for use wherever space is at a premium. 



EdgeClip 

• Easy to assemble by hand 


bundling 

• For edges of 2.5 mm 

• Secure fixing of the EdgeClip into drill 

hole 

• Ideal for use wherever space is at its 

premium 




Length 

(L) 

Width 

(W) 

The holding tab increasese the tensile strength additionaly. 

Position of the drill hole for the holding tab 

Bundle 

Ø max. 

Min. Tensile 


(N) 

Material 

Cable Tie 

Material 

Foot Part 

150-45299 T50ROS-EC2,5 200.0 4.6 45.0 225 PA66HS PA66HIRHS 1–5 

150-45292 T50REC2.5B 200.0 4.6 45.0 225 PA66HS PA66HIRHS 1–10 




Fixing ties 

Application 

Tool Drawing 

1.7 

75

1.7 

76 


Fixing ties 

1-Piece Fixing Tie with Pipe Clip 


• Easily locks onto a cable, tube or hose 

(D = 4.5 – 5.2 mm) 

• Cable tie head always in defined position 

• Suitable for post-installation of bundles 

One Piece Fixing Ties with Wire 

Clip 


• Cable tie head always in defined position 

• Easy to close by simply pressing the cover 

• Firm sit as a variation of sizes for different 

wires is available 

• Suitable for post-installation of bundles 

Brake cable fixing 

Brake cable fixing 

Length Width Bundle Min. Tensile Attach to 


(L) (W) Ø max. Strength (N) Ø Material Colour 

148-00100 Bracket brake line 154.0 3.6 35.0 133 5.1 PA66HS Natural (NA) 

148-00101 Bracket brake line 154.0 3.6 35.0 133 5,1 PA46 Grey (GY) 


T50SOSWA - the easy way for parallel guidance of cables next to a wire. 

T50SOSWA-types 

T50SOSWB-types 

Length Width Bundle Min. Tensile strength Attach to 


for ties (N) 


148-00089 T50SOSWA1.8E 150.0 4.6 35.0 225 1.8 PA66HS Black (BK) 




148-00090 T50SOSWB1.8E 150.0 4.6 35.0 225 1.8 PA66HS Black (BK) 








L

2-Piece Fixing Ties with Pipe 

Clip, twistable 360° 


• Simply clip on a wire or hose 

• Fixing clip offers full 360° rotation 

• Routed cable can move in any direction in 

relation to the fixing point 

• Inside serrated cable tie 

• Idealy used in the Automotive Industry 

T50SVC65. 

T50SVC5, T50SVC4 

T50SVC5 rotates in any direction. 

T50SVCOC39-45 


Fixing ties 




Min. Tensile 

strength for ties Attach to 


(L) (W) Ø max. (N) 


156-00791 T50SVC3.5 155 4.7 35.0 225 3.45 - 3.55 PA66HS, PA66HIRHS Black (BK) 

156-00318 T50SVC4S 155 4.7 35.0 225 3.8 - 4.2 PA66HS, PP Black (BK), Natural (NA) 

156-00447 T50SVC4 155 4.7 35.0 225 3.8 - 4.2 PA66HS, PA66HIRHS Black (BK) 

155-31202 T50SVC5 155 4.7 35.0 225 4.5 - 5.2 PA66HS Black (BK) 

156-00155 T50SVC65 155 4.7 35.0 225 6.5 - 8.0 PA66HS, PA66HIRHS Black (BK) 

156-00134 T50SVCOC10-14 155 4.7 35.0 225 10.0 - 14.0 PA66HS, PA66HIRHS Black (BK) 



156-00272 T50SVCOC25-31 155 4.7 35.0 225 25.0 -31.0 PA66HS, PA66HIRHS Black (BK) 



156-00128 T50SMVCOC1014 210 4.7 50.0 225 10.0 - 14.0 PA66HS, PA66HIRHS Black (BK) 

156-00129 T50SMVCOC15-18SET 210 4.7 50.0 225 15.0 - 18.0 PA66HS, PA66HIRHS Black (BK) 

156-00130 T50SMVCOC19245 210 4.7 50.0 225 19.0 - 24.5 PA66HS, PA66HIRHS Black (BK) 

156-00577 T50SMVCOC19245 210 4.7 50.0 225 19.0 - 24.5 PA46 Grey (GY) 

156-00303 T50SMVCOC25-31 210 4.7 50.0 225 25.0 - 31.0 PA66HS, PA66HIRHS Black (BK) 

156-00304 T50SMVCOC31-39 210 4.7 50.0 225 31.0 - 39.0 PA66HS, PA66HIRHS Black (BK) 

156-00131 T50SMVCOC39-45SET 210 4.7 50.0 225 39.0 - 45.0 PA66HS, PA66HIRHS Black (BK) 



1.7 

77

1.7 

78 


Fixing ties 

2-Piece Fixing Ties with Pipe 

Clip 


• For post-installation of additional cables 

for preassembled cable looms 

• Variety of twist angles and even different 

loop directions provide flexibility for cable 

routing 

• For OC1 and 2A additional cable tie 

dimensions are available 

• CBTO-series for cable ties up to 5 mm 

! 

Other dimensions 


Article- 

No. Type 

Length 

(L) 

EdgeClip CBTO50R, verdrehbar um 90°. 

Width 

(W) 

Bundle 

Ø max. 



Attach to 

Ø Colour Material Drawing 

156-00012 T30ROC1A 150 3.6 31.0 4.0 - 10.0 Black (BK) PA66HS, PA66HIRHS 


156-00505 T30ROC1B 150 3.6 31.0 4.0 - 10.0 Black (BK) PA66HS, PA66HIRHS 



156-00014 T30ROC2A 150 3.6 31.0 6.5 - 7.5 Grey (GY) PA46 


2-Piece Fixing Ties with Pipe, twistable 90° 

156-00416 T50ROC10-14CBTO-SD-SET 200 4.6 45.0 10.0 - 14.0 Black (BK) PA66HS, PA66HIRHS 

156-00419 T50ROC15-18CBTO-SD-SET 200 4.6 45.0 15.0 - 18.0 Black (BK) PA66HS, PA66HIRHS 

156-00422 T50ROC19-24.5CBTO-SD-SET 200 4.6 45.0 19.0 - 24.5 Black (BK) PA66HS, PA66HIRHS 



2-Piece Fixing Ties for Heavy 

Duty Applications, for Screws 

Used in the Automotive and Truck Industry 

for harness fixing in the engine body, these 

parts offer solutions in many other industrial 

applications with difficult environment. 


• Pre-assembled 2-piece fixing tie 


bundling 

• Secure alignment to the bundle due to 

H-design 

• A suitable alternative for metal clamps 

• Withstands vibrations and displacement 

forces 

• High tightening torque through metal 

bushing 




HDM6-Series for M6-Screws 

Length 

(L) 

Length 

(L2) 

These HDM can be assembled on either screw or stud 

HDM with cable tie (L = length of the tie″flat″) 

Width 

(W) 

Width 

(W2) 

Height 

(H) 

Bundle 

Ø max. 


Fixing ties 

Mounting 

Screw Type Material Colour 

156-00406 T120RHDM6 380.0 38.0 7.6 20.0 15.5 100 M6 PA66HIRHS Black (BK) 

156-00407 T120RHDM6 380.0 38.0 7.6 20.0 15.5 100 M6 PA46 Grey (GY) 

HDM8-Series for M8-Screws 

156-00408 T120RHDM8 380.0 38.0 7.6 20.0 15.5 100 M8 PA66HIRHS Black (BK) 

156-00409 T120RHDM8 380.0 38.0 7.6 20.0 15.5 100 M8 PA46 Grey (GY) 



1.7 

79

1.7 

80 


Fixing ties 

2-Piece Fixing Ties for parallel 

separation 



coupler 


bundling 

• Easy addition of cables after assembly 

• For parallel routing of bundles that can 

be twisted 90° even after setting 



T120RCoupler with two ties 

T120RCoupler can be used for parallel routing of 

two cable ties. 

T120RCoupler Fixing Element - Coupler 

The second tie can be used for post-installations. 


Min. Tensile 

strength for ties Material Material 


(L) (W) Ø max. (N) 

Cable Tie Foot Part Colour 

156-00276 T50RCOUPLER 200 4.6 50.0 225 PA66HIR(S) PA66HIRHS Black (BK) 

156-00382 T50RCOUPLER 200 4.6 50.0 225 PA46 PA46 Grey (GY) 

156-00550 T120RSINGLECOUPLER 380 7.6 100.0 535 PA66HIR(S) PA66HIRHS Black (BK)

Other combinations - Hellermann Tyton

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?