REXP-1210U-RP Specification
-
REXP-1210U-RP (EOL)
JBOD Connection Interface SAS Drive Bay 12 x 3.5-inch The system is shipped without HDD.
For the HDD compatibility list, please visit https://www.qnap.com/compatibility/Drive Compatibility 3.5-inch bays:
3.5-inch SATA 6Gb/s, 3Gb/s hard disk drives
2.5-inch SATA 6Gb/s, 3Gb/s solid state drivesYou can only use one disk type (HDD or SSD) in a RAID group. Combining different types of disk in one RAID group is not supported.Hot-swappable Form Factor 2U Rackmount Host Interface Three SAS 6Gbps 4x wide port LED Indicators Front panel: Status, fault, system over heat, fan error
Rear panel: SAS link, SAS error, enclosure IDButtons Power Button Dimensions (HxWxD) 88 × 439 × 520 mm Weight (Net) 14.8 kg Weight (Gross) 21.99 kg Operating Temperature 0 - 40 °C (32°F - 104°F) Storage Temperature 20 - 70°C (-4°F - 158°F) Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) Power Supply Unit Redundant/ Hot Swap ATX Power Supply, 400W, 90-
264Vac~, 47-63HzPower Consumption: Operating Mode, Typical 162.47 W Tested with drives fully populated.System Warning Buzzer QTS / QuTS hero Supports JBOD cascading Standard Warranty 3 Management Managed via QNAP QTS OS
1. Supports disk S.M.A.R.T. information
2. RAID expansion enclosure identifier
3. Locate RAID expansion enclosures
4. Locate hard disks on RAID expansion enclosure
5. Smart fan control by detecting system and hard drive temperature
6. In-band SAS firmware updateNote: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications and refer to the hardware user manual to install compatible QNAP memory modules.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
QNAP reserves the right to replace partial parts or accessories if the original is no longer available from its manufacturer/supplier. Any replacement would be fully tested and verified to meet strict compatibility and stability guidelines and will deliver identical performance to the original.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.
The functions listed below are managed via the QNAP QTS operating system.
1. Support for hard disk’s S.M.A.R.T. capacity
2. RAID expansion enclosure LED identifier
3. Location indication of RAID expansion enclosure
4. Location indication of hard disks on RAID expansion enclosure
5. Smart fan control
6. In-band firmware update
QNAP Flexible Volume
The disks, RAID Groups, storage pools, and volumes in the RAID expansion enclosures are configured via the QTS operating system.
1. Support for multiple RAID groups in a storage pool to ensure data safety
2. Online storage pool expansion
3. Online volume expansion
4. Block-based iSCSI LUN
5. Support for thin-provisioned volume with space reclamation
6. Support for thin-provisioned iSCSI LUN with space reclamation
Intelligent Storage & Snapshots Manager
The QTS Storage & Snapshots Manager neatly presents tools and options for managing system storage and snapshots with an intuitive graphical interface. From reviewing the system storage allocation in the Dashboard, to managing volumes, Storage Pools, disks, iSCSI storage, and snapshots, the Storage & Snapshots Manager provides a centralized place to ease the work of storage management.
QTS does not support DRM content and some IPv6 services.
Some data encryption features may be unavailable because of country-specific legislative restrictions.
Some features may vary by model.
Designs and specifications are subject to change without notice.
REXP-1210U-RP
0.5m SAS cable (SFF-8644)
Power cord x 2
Flat head screw (for 2.5" HDD)
Flat head screw (for 3.5" HDD)
Quick Installation Guide
Optional Accessories
Choose specification