Goulds D31625, Weatherproof Duplex Control Panel, 208/230/460/575 Volts, 1.6-2.5 Amp Range, 3 Phase, Indoor/Outdoor NEMA 4X Fiberglass Enclosure

FEATURES

Goulds Centripro SES Duplex Control Panel (3 Phase)

This is a weatherproof, duplex control panel for providing fully automatic operation for two pumps. An Electrical Alternator is used on a duplex pump application where automatic electrical cycling of the pump is desired for added protection in residential or commercial applications. With one pump operating to handle normal flow, a second pump becomes operational in the event the water level continues to rise. 

Features

• Rugged NEMA 4X, fiberglass enclosure with gasketed, hinged door, stainless steel hardware, 30 watt, flashing red light, and 95db alarm horn withstands even the most severe weather conditions and prevents corrosion
• Three phase. Field adjustable for 208/230 /460/575V, 60 Hz
• 115V control circuit transformer
• 2 adjustable motor overload protectors. Heaters not required
• Solid state electronic pump alternator circuit displays float status for ease of installation and trouble shooting
• Alternator selector switch for maintenance on one or both pumps
• Accepts single or dual power feed
• 2 hand-off-automatic (H-O-A) pump switches
• On-off control circuit switch
• 2 oversized magnetic contactors
• Numbered terminal strip-screw type
• Lag pump start delay delays starting lag pump for 5 seconds if both pumps attempt to start simultaneously as after a power outage
• Hinged door with lockable stainless steel latch for safe operation indoors or out
• High-level alarm circuit includes through-door mounted silence switch for manual silence of alarm horn
• Through-door mounted alarm test switch insures proper operation of the alarm circuit without the need to open the panel
• Two through-door mounted pump run lights
• Top-mounted high intensity flashing red light provides 360° visibility
• This duplex control is factory wired for operation with three float bulbs. An easy field modification for four float bulb operation using separate “lag-on” and “alarm bulbs” is provided
• Panel can be wired for a single power feed for pumps and control circuit or the control circuit can be wired to a separate power supply to insure alarm integrity in case of a tripped main breaker
• Auxiliary alarm contacts provided for remote alarm connection
• Color coded wiring, screw type terminals and plug in sockets, ensure ease of field servicing
• Entire unit is UL and CUL listed

Application

• Sump
• Effluent
• Sewage
• Water transfer

Note: Requires three float switches or optional fourth lag float (sold separately.) The type selected determines the quantity needed. The basin depth and panel location determine the required cord length. Please contact customer service for additional information.