14,000W 2-Channel Amplifier with NomadLink Network Monitoring and Dedicated Control for Touring Applications
Built to Handle Extreme Low-Frequency Loads Effortlessly...
Over the past decade, the tight and transparent sound of Lab.gruppen touring amplifiers has earned the praise of renowned FOH engineers and leading sound rental companies worldwide. FP 14000, the new flagship model of the FP+ Series, advances this tradition by further augmenting effective power output to effortlessly handle extreme low-frequency loads.The Regulated Switch Mode Power Supply (R.SMPS) has been updated to provide more sustained high power during extended bursts of low frequency content, while at the same time ensuring stable rail voltages even with wide fluctuations of external mains voltage. The forceful, high-current (83 A peak) output stage relies on Lab.gruppen's patented Class TD topology, a breakthrough in amplifier technology that approaches the efficiency of Class D while retaining the sonic purity of proven Class B designs. A highly refined and efficient circuit layout further optimizes the interaction of R.SMPS and Class TD to produce the unprecedented power density of the FP 14000.
To keep its cool under extreme demands, the FP 14000 relies on Lab.gruppen's proprietary Intercooler. This innovation uses thousands of copper fins to multiply the exposed heatsink surface's rapid heat dissipation. Also, all output devices are mounted transverse to the airflow for uniform cooling. As a result, the FP 14000 delivers Lab.gruppen's' trademark “all the power, all the time” with no degradation of sonic performance.
To maximize headroom in any application, the FP 14000 offers adjustable input gain along with Lab.gruppen's exclusive Voltage Peak Limiter (VPL). Adjustable on a per-channel basis, VPL optimizes the output for any load, from a single massive subwoofer to a series of HF compression drivers.
The comprehensive warning and protection features on the FP 14000 safeguard output circuits and connected loads while also extending amplifier life and minimizing the chance of service interuptions Whether it's a matter of faulty wiring, improper use, or extreme ambient temperatures, the FP 14000 gives clear indication of any problems. Automatic protection measures engage only at critical thresholds. Operating conditions are re-checked every six seconds and, if a fault is detected, normal operation is resumed when measurements return to nominal.
The FP 14000 is shipped with a NomadLink network interface as standard. In conjunction with DeviceControl software, NomadLink allows comprehensive monitoring of amplifier status (including fault or warning indications) and also enables remote control of power on/off, channel mute, and channel solo functions. NomadLink is compatible with popular third-party control platforms; a separate NLB 60E NomadLink Bridge & Network Controller is required.
General
| Number of amplifier channels |
2
|
| Peak total output all channels driven |
14000 W
|
| Peak output voltage per channel |
195 V
|
| Max output current per channel |
90 A peak
|
Max output power (all channels driven)
| 2 ohms |
7000 W
|
| 4 ohms |
4400 W
|
| 8 ohms |
2350 W
|
| 16 ohms |
1200 W
|
Max output power bridged
| 2 ohms |
Not recommended 1
|
| 4 ohms |
14000 W
|
| 8 ohms |
8800 W
|
| 16 ohms |
4700 W
|
Performance
| THD 20 Hz - 20 kHz at 1 W |
<0.1%
|
| THD at 1 kHz and 1 dB below clipping |
<0.05%
|
| Signal to Noise Ratio |
>112 dBA
|
| Channel separation (Crosstalk) at 1 kHz |
>70 dB
|
| Input impedance |
20 kOhm
|
| Output impedance @ 100 Hz |
19 mOhm
|
Gain, Sensitivity and Limiters
| VPL, selectable per ch |
195, 170, 140, 116, 100, 80, 66, 54 V
|
| VPL, when bridged 2 |
390, 340, 280, 232, 200, 160, 132, 108 V
|
| Voltage Peak Limiter mode (per ch.) |
Hard / Soft
|
| Amplifier gain selectable (all channels) – rear-panel switches 2 |
23, 26, 29, 32, 35, 38, 41, 44 dB
|
| Default gain |
38 dB
|
| Level adjustment (per channel) |
Front-panel potentiometer, 31 position detented from -inf to
|
Connectors and Buttons
| Input connectors (per ch.) |
3-pin XLR, electronically balanced
|
| Output connectors (per ch.) |
Binding post
|
| Output bridge mode |
A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source
|
| NomadLink network |
On board, 2 x RJ45 connectors IN and OUT
|
| Intelligent fans (on/off) |
Yes, depending on presence of output signal
|
| Power on/off and Remote enable on/off |
Individual switches on front-panel
|
| Cooling |
Dual fan, front to rear airflow, no filter required, temperature controlled speed
|
Front-panel user interface
| Common |
NomadLink Network; Power Average Limiter (PAL)4; Power on
|
| Per channel |
Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
|
Power
| Operating voltage, 230 V / 115 V nominal 3 |
130-265 V / 65 -135 V
|
| Minimum power-up voltage, 230 V / 115 V |
171 V / 85 V
|
| Power Average Limiter (PAL) 4 |
Yes
|
| Soft-start / Inrush Current Draw |
Yes / max. 5 A
|
| Mains connector |
230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
|
Dimensions
| Dimensions |
W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)
|
Weight
Finish
| Finish |
Black painted steel chassis with black painted steel / aluminum front
|
Approvals
| Approvals |
CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC
|
