Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.ECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.LCD displayAlpha-Numeric Display which displays system parameters and alarms.Serial connectivityProvides management of the UPS via a serial port.USB connectivityProvides management of the UPS via a USB port (not available on all models).FeaturesManagement SoftwareAllows you to easily monitor your utility power and manage your UPS.ECO ModeOperating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.Input power factor correctionMinimizes installation costs by enabling the use of smaller generators and cabling.High efficiencyHigh efficiency rates that remain stable even at lower operating power levels.SmartSlotCustomize UPS capabilities with management cards.Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Double conversion on-line topologyGuarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.Wide input voltage rangeDesigned for harsh electrical environments to save battery life.ServiceabilityDisconnected battery notificationWarns when a battery is not available to provide backup power.Audible alarmsProvides notification of changing utility power and UPS power conditions.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Predicitive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.ManageabilitySerial connectivityProvides management of the UPS via a serial port.SmartSlotCustomize UPS capabilities with management cards.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Network manageableProvides remote power management of the UPS over the network.LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.AvailabilityIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
| Features | |
| UPS topology: | Double-conversion (Online) |
| Output power capacity: | 1 kVA |
| Output power: | 800 W |
| Waveform: | Sine |
| Input operation voltage (min): | 160 V |
| Input operation voltage (max): | 280 V |
| Input frequency: | 40/70 Hz |
| Output operation voltage (min): | 220 V |
| Output operation voltage (max): | 240 V |
| Output frequency: | 50/60 Hz |
| Output voltage regulation: | 1% |
| Surge energy rating: | 600 J |
| Number of input phases: | 1 |
| Number of output phases: | 1 |
| Efficiency: | 88% |
| Input power factor: | 0.95 |
| Output power factor: | 0.8 |
| Crest factor: | 3:1 |
| ECO mode: |  |
| Emergency Power Off (EPO): |  |
| Output voltage Total Harmonic Distortion (THD): | 3% |
| Noise level: | 50 dB |
| Audible alarm(s): | |
| Audible alarm modes: | Alarm when on battery, Fault, Low battery alarm, Overload alarm |
| Auto-restart: | |
| Maintenance-free: | |
| Socket circuit breaker: | |
| Ports & interfaces | |
| AC outlet types: | C13 coupler |
| Power plug: | C14 coupler |
| AC outlets quantity: | 3 AC outlet(s) |
| USB port: | |
| USB port type: | USB Type-B |
| Serial interface: | |
| Serial ports quantity: | 1 |
| SmartSlot: | |
| Battery | |
| Battery technology: | Sealed Lead Acid (VRLA) |
| Battery recharge time: | 4 h |
| Automatic battery test: | |
| Design | |
| Form factor: | Rackmount |
| Product colour: | Black |
| Rack capacity: | 2U |
| Display type: | LCD |
| LED indicators: | |
| Certification: | CE, IEC 62040-1-1, IEC 62040-1-2 REACH |
| Operational conditions | |
| Operating temperature (T-T): | 0 - 40 °C |
| Storage temperature (T-T): | -20 - 50 °C |
| Operating relative humidity (H-H): | 0 - 95% |
| Storage relative humidity (H-H): | 0 - 95% |
| Operating altitude: | 0 - 3000 m |
| Non-operating altitude: | 0 - 14763.6 m |
| Technical details | |
| Sustainability certificates: | RoHS |
| Weight & dimensions | |
| Width: | 437 mm |
| Depth: | 312 mm |
| Height: | 86 mm |
| Weight: | 11 kg |
| Package width: | 455 mm |
| Package depth: | 551 mm |
| Package height: | 218 mm |
| Package weight: | 13.1 kg |
| Packaging data | |
| Cables included: | USB cable |
| Manual: | |
| Software CD: | |
| Logistics data | |
| Harmonized System (HS) code: | 85078000 |
| Other features | |
| Nominal output voltage: | 230 V |
| Nominal input voltage: | 230 V |
