Table of Contents
Advertisement
Available languages
Available languages
ASSEMBLY
To prevent accidental tip hazard, base
supplied must be securely fixed to the
dispenser as shown.
Do NOT operate dispenser without base
properly installed.
Keep plastic bags away from children.
1.
Remove dispenser from packaging.
2.
Lay dispenser on its back.
3.
Snap two halves of base together. (See
illustration A)
4.
Attach base to bottom of dispenser using (4)
screws. (See illustration B)
Note: Do NOT tighten each screw until all
screws have been started.
5.
Position cooler upright. Unpack drip tray and
insert into dispenser until tray snaps firmly into
place. (See illustration C)
6.
Properly dispose all of packaging.
Model # 900144: Page 5
A
B
C
Hide quick links:
Advertisement
Chapters
Table of Contents
