Table of Contents
Advertisement
1
Preparing for installation
Table1-1
describes the HPE FlexFabric 5944 switches, power supplies, and fan modules available
for the switches.
Table1-1 HPE FlexFabric 5944 switch models and power supplies
Product code
HPE FlexFabric 5944 switch series
JL836A
Power supplies
JL593A
JL592A
JL688A
Fan module
JL838A
JL837A
For regulatory identification purposes, the HPE 5944 switches are assigned Regulatory Model
Number (RMN), which are listed in the following table.
Product code
JL836A
Safety recommendations
To avoid any equipment damage or bodily injury caused by incorrect use, read the following safety
recommendations before installation. Note that the recommendations do not cover every possible
hazardous condition.
•
Before cleaning the switch, remove all power cords from the switch. Do not clean the switch
with wet cloth or liquid.
•
Do not place the switch near water or in a damp environment. Prevent water or moisture from
entering the switch chassis.
•
Do not place the switch on an unstable case or desk. The switch might be severely damaged in
case of a fall.
•
Ensure good ventilation of the equipment room and keep the air inlet and outlet vents of the
switch free of obstruction.
•
Connect the yellow-green protection grounding cable before power-on.
•
Make sure the operating voltage is in the required range.
HPE description
HPE FlexFabric 5944 48XGT 6QS28 Switch
HPE FlexFabric 5710 450W Back-to-Front
AC Power Supply
HPE FlexFabric 5710 450W Front-to-Back
AC Power Supply
HPE FlexFabric 5710 450W 48V
Front-to-Back DC Power Supply
HPE FlexFabric 5944 Power to Port Airflow
(Back to Front) Fan Module
HPE FlexFabric 5944 Port to Power Airflow
(Front to Back) Fan Module
RMN
BJNGA-AD0092
1-1
Alias
HPE 5944 48XGT 6QS28
PSR450-12A
PSR450-12A1
PSR450-12D
5944 power-to-port fan module
5944 port-to-power fan module
Description
HPE FlexFabric 5944 48XGT 6QS28 Switch
Advertisement
Table of Contents
