Cisco Catalyst 2960 Series Datasheet
Switches with lan base software
Hide thumbs
Also See for Catalyst 2960 Series:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Advertisement
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Cisco Catalyst 2960 Series Switches with LAN Base
Software
®
®
Cisco
Catalyst
2960 Series Switches with LAN Base software are a family of fixed-
configuration, standalone intelligent Ethernet devices with Power Over Ethernet (PoE) or
non-PoE configurations that provide desktop Fast Ethernet and Gigabit Ethernet
connectivity, enabling enhanced LAN services for entry-level enterprise, midmarket, and
branch office networks (See Figure 1). The Cisco Catalyst 2960 LAN Base Series offers
integrated security, including Network Admission Control (NAC), advanced quality of
service (QoS), and resiliency to deliver intelligent services for the network edge.
The Cisco Catalyst 2960 LAN Base Series offers:
PoE configurations up to 48 ports
●
Intelligent features at the network edge, such as sophisticated access control lists (ACLs)
●
and enhanced security
Networked Sustainability: Cisco EnergyWise to measure, report and reduce energy usage
●
across the entire organization
Dual-purpose uplinks for Gigabit Ethernet uplink flexibility, allowing use of either a copper
●
or a fiber uplink; each dual-purpose uplink port has one 10/100/1000 Ethernet port and one
Small Form-Factor Pluggable (SFP)-based Gigabit Ethernet port, with one port active at a
time
Network control and bandwidth optimization using advanced QoS, granular rate limiting,
●
ACLs, and multicast services
Network security through a wide range of authentication methods, data encryption
●
technologies, and NAC based on users, ports, and MAC addresses
Easy network configuration, upgrades, and troubleshooting using Cisco Network Assistant
●
software
Autoconfiguration for specialized applications using Auto Smartports
●
Limited lifetime hardware warranty
●
Software updates at no additional charge
●
Figure 1.
Cisco Catalyst 2960 Series Switches
Data Sheet
Page 1 of 21
Advertisement
Table of Contents
Related Manuals for Cisco Catalyst 2960 Series
Summary of Contents for Cisco Catalyst 2960 Series
- Page 1 Fast Ethernet and Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, midmarket, and branch office networks (See Figure 1). The Cisco Catalyst 2960 LAN Base Series offers integrated security, including Network Admission Control (NAC), advanced quality of service (QoS), and resiliency to deliver intelligent services for the network edge.
- Page 2 Cisco Catalyst 2960G-24TC-L Cisco Catalyst 2960G-48-TC-L The Cisco Catalyst 2960 LAN Base software image is a rich suite of intelligent services, including advanced QoS, rate limiting, ACLs, and IPv6 management. The SFP-based Gigabit Ethernet ports accommodate a range of SFP transceivers, including the Cisco 1000BASE-SX, 1000BASE-LX, 1000BASE-BX, 1000BASE-ZX, 100BASE-FX, 100BASE-LX, 100BASE-BX, and coarse wavelength-division multiplexing (CWDM) SFP transceivers.
-
Page 3: Power Over Ethernet
Cisco IP phones and wireless access points. Cisco Catalyst 2960 PoE models comply with Cisco pre-standard PoE and IEEE 802.3af. PoE removes the need for wall power to each PoE-enabled device and eliminates the cost for additional electrical cable and circuits that would otherwise be necessary in IP phone and WLAN deployments. -
Page 4: Enhanced Security
Enhanced Security The wide range of security features that the Cisco Catalyst 2960 LAN Base Series offers helps you protect important information, keep unauthorized people off the network, guard privacy, and maintain uninterrupted operation. -
Page 5: Advanced Qos
IP address, source or destination MAC address, or the Layer 4 TCP or UDP port. At the ingress, the Cisco Catalyst 2960 LAN Base Series also polices to determine whether a packet is in or out of profile, marks to change the ©... - Page 6 Web browsing, can be handled on a lower-priority basis. The Cisco Catalyst 2960 Series LAN Base can perform rate limiting through its support of the Cisco committed information rate (CIR) function. Through CIR, bandwidth can be guaranteed in increments as small as 1 Mbps.
- Page 7 CiscoWorks LMS supports over 400 different device types, providing: Table 2 gives the features and benefits of the Cisco Catalyst 2960 LAN Base Series. Table 3 gives the hardware specifications, and Table 4 gives the power specifications. Table 5 lists the management and standards support, and Table 6 provides the safety and compliance information.
- Page 8 Cisco Express Setup © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. ● Cisco IOS Software CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches.
- Page 9 Software Features for Bandwidth Optimization © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. ● CiscoWorks network-management software provides management capabilities on a per-port and per-switch basis, providing a common management interface for Cisco routers, switches, and hubs.
- Page 10 IP address, source and destination MAC address, or Layer 4 TCP or UDP port number. ● Cisco control-plane and data-plane QoS ACLs on all ports help ensure proper marking on a per-packet basis.
- Page 11 SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions. ● Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the Cisco Secure intrusion detection system (IDS) to take action when an intruder is detected.
- Page 12 ● Cisco RPS Connector ● The connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch. ● The connector offers a 2300W redundant power system that supports up to six external network devices and provides power to two failed devices at a time.
- Page 13 ● Cisco Catalyst 2960-24LT-L: 1.73 x 17.5 x 13 in. (4.4 x 44.5 x 33.2 cm) ● Cisco Catalyst 2960-24PC-L : 1.73 x 17.5 x 13 in. (4.4 x 44.5 x 33.2 cm) ● Cisco Catalyst 2960-48PST-L : 1.73 x 17.5 x 13 in. (4.4 x 44.5 x 33.2 cm) ●...
- Page 14 Current Power Rating DC Input Voltages (RPS Input) © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. ● Cisco Catalyst 2960PD-8TT-L: 737,065 hrs ● Cisco Catalyst 2960-8TC-L: 615,549 hrs ● Cisco Catalyst 2960-24TT-L: 407,707 hrs ●...
- Page 15 Measured Output 100% Throughput (with maximum possible PoE loads) Measured Power Consumption Measured Output © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Power Specifications for Cisco Catalyst 2960 LAN Base Switches WS-C2960- WS-C2960- WS-C2960-...
-
Page 16: Poe Power Consumption
Celsius, atmospheric pressure in the range of 860 to 1060 mbar and relative Humidity between 30 to 75%. Typically this power draw is realized when a switch is running 100% traffic load of 64 byte sized packets on all its ports and uplinks and also drawing 100% PoE load . - Page 17 PoE loads) under normal conditions. Normal conditions signify a temperature of 25 Degrees Celsius, atmospheric pressure in the range of 860 to 1060 mbar and relative Humidity between 30 to 75%. The numbers below indicate a 5% traffic load and 50% PoE load on the switch and its uplinks.
-
Page 18: Service And Support
Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date system software. The services and support programs described in Table 7 are available as part of the Cisco Desktop Switching Service and Support solution and are available directly from Cisco and through resellers. - Page 19 CBLGRD-C2960G-8TC= RCKMNT-19-CMPCT= RCKMNT-1RU= RCKMNT-REC-1RU= © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Ordering Information for Cisco Catalyst 2960 LAN Base Switches Description ● 8 Ethernet 10/100 ports and 1 10/100/1000 PoE input port ● Power adaptor (PWR-A=) and power cord sold separately ●...
- Page 20 CAB-SM-LCSC-5M For more information about Cisco products, contact: © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. 1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength 1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength...
- Page 21 Data Sheet Printed in USA C78-341562-06 09/09 © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 21 of 21...