Advertisement
Quick Links
Owner's Manual
Models: SMARTINT2200VS & SMARTINT3000VS
Intelligent, Line-Interactive UPS Systems (Tower Configuration)
• 230V Input • 2200VA - 3000VA Capacities • Extended-Run Options*
Français
Póññêèé
Copyright © 2004 Tripp Lite. All rights reserved. SmartPro
* SMARTINT3000VS model
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
®
is a registered trademark of Tripp Lite.
2
3
4
5
10
10
11
22
33
Advertisement
Related Manuals for Tripp Lite SMARTINT3000VS
Summary of Contents for Tripp Lite SMARTINT3000VS
-
Page 1: Table Of Contents
Storage & Service Specifications Español Français Póññêèé Customer Support: (773) 869-1234 • www.tripplite.com Copyright © 2004 Tripp Lite. All rights reserved. SmartPro * SMARTINT3000VS model 1111 W. 35th Street Chicago, IL 60609 USA ® is a registered trademark of Tripp Lite. -
Page 2: Important Safety Instructions
Equipment Connection Warnings • Do not use Tripp Lite UPS Systems for life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device. -
Page 3: Quick Installation
UPS, plug your equipment into the UPS.* * Order additional jumper cords from Tripp Lite. Call (773) 869-1234; order part # P004-006. Your UPS is designed to support only com- puter equipment. You will overload the UPS if the total VA ratings for all the equipment you connect exceeds the UPS's Output Capacity (see Specifications). -
Page 4: Optional Installation
DB9 port of your computer to the DB9 port of your UPS. Install on your computer the Tripp Lite PowerAlert Software appropriate to your computer’s operating system. Your UPS may feature additional communications ports;... -
Page 5: Basic Operation
Optional Installation EPO Port Connection This optional feature is only for those applica- tions which require connection to a facility’s Emergency Power Off (EPO) circuit. When the UPS is connected to this circuit, it enables emer- gency shutdown of the UPS's inverter. Using the cable provided, connect the EPO port of your UPS (see ) to a user-supplied normally... - Page 6 UPS batteries need to be recharged or replaced. Allow the UPS to recharge continuously for 12 hours, and repeat the self-test. If the LED remains lit, contact Tripp Lite for service. If your UPS requires battery replacement, visit www.tripplite.com to locate the specific Tripp Lite replacement bat-...
- Page 7 Allow the UPS to recharge continuously for 12 hours, and repeat the self-test. If the LED continues to light, contact Tripp Lite for service. If your UPS requires battery replacement, visit www.tripplite.com to locate the specific Tripp Lite replacement...
- Page 8 IEC320-C13 (female) or USB connection to your UPS, you can remotely reboot connected equipment by turning the receptacles OFF and ON using Tripp Lite’s PowerAlert Software. Select models have their receptacles divided into one or more load banks (labeled “LOAD 1,” etc.) which may...
- Page 9 UPS. Refer to your accessory’s manual for installation instructions. Contact Tripp Lite Customer Support at (773) 869-1234 for more infor- mation, including a list of available SNMP, networking management and connectivity products.
-
Page 10: Storage & Service
AC Noise Attenuation (>40 dB at 1MHz); AC Protection Modes (H to N, H to G, N to G). “+” Battery runtime can be extended with addition of optional Tripp Lite External Battery Pack (sold separately). SMARTINT3000VS uses BP48V18 battery pack. External battery will increase both the battery runtime and the battery recharge time. -
Page 11: Español
1111 W. 35th Street, Chicago, IL 60609 USA 773.869.1234 (USA) • 773.869.1212 (International) www.tripplite.com 200404080 93-2245_EN...