Sony Ipela Quick Reference Manual
Hide thumbs
Also See for Ipela:
- Application manual (24 pages) ,
- Application manual (32 pages) ,
- Easy setup manual (10 pages)
Advertisement
Quick Links
PCS-MCS1 HD MCU System
Quick Reference Guide
System Configuration Example
The unit allows you to hold conferences with up to 16 connected points.
Computer
#1
#2
#3
Operating the Unit
Operate the unit from a computer that is connected to the same network as the unit.
Open a web browser on the computer,
enter the unit's IP address in the address
bar, and press the Enter key.
Enter the user name and password in the
dialog box that appears, and click [OK].
The web control screen appears.
Use the following user name and password when logging in for
the first time.
User name: sonypcs
Password: sonypcs
The Initial Setup Wizard will appear when you log in. Configure
the necessary settings, and change the password. (The user
name cannot be changed.) After you log in again and agree
to the end-user license agreement, the unit will be ready for
operation.
#4
#5
#6
#7
PCSA-MPE1
Optional software (not supplied) is required to connect to more than four points.
#8
#9
#10
#11
Enter the IP address.
The factory default address is
"192.168.0.100."
Enter the user name and password.
The user name is "sonypcs" or "pcsuser," and the
password is configured by the administrator.
4-587-126-11 (1)
PCS-MCS1
Videoconferencing terminal
#12
#13
#14
#15
PCSA-MPE2
© 2015 Sony Corporation
#16
Advertisement
Related Manuals for Sony Ipela
Summary of Contents for Sony Ipela
- Page 1 After you log in again and agree to the end-user license agreement, the unit will be ready for operation. Enter the user name and password. The user name is “sonypcs” or “pcsuser,” and the password is configured by the administrator. © 2015 Sony Corporation...
- Page 2 Verifying the Unit’s IP Address You can save the unit’s configuration file to a USB storage device to verify the IP address in the following cases. ˎ ˎ You forgot the IP address you assigned to the unit. ˎ ˎ You want to verify the IP address to operate the unit in DHCP mode.