Page 1
UsER InsTRUCTIons VERTICAL CUTTER MIXER VCM-41 / VCM-42 Made in sweden. Exclusively distributed and serviced in Australa by Roband Australia Pty Ltd. All standard Hällde products are designed to run at 220-240V per phase, 50Hz. All specifications are nominal only. All information contained in this instruction is subject to change without notice due to constant research and development.
Check that all of the parts have been delivered, have a plug, open the isolating switch. Remove For a good and even result with firm foods such that the machine operates as intended, and HALLDE • User Instructions...
Page 3
• Do not use abrasive detergents or cleaning TECHNICAL SPECIFICATION products. HALLDE VCM - 42 • Avoid the use of cleaning sponges with CAPACITY AND VOLUME: Gross volume 4 scouring pads (e.g. Scotch-Brite™). litres. Net volume liquid 1.6 litres.
Page 4
Vertical Cutter Mixer VCM-41 and Vertical Cutter Blender VCB-61 HALLDE • User Instructions...
Page 5
Vertical Cutter Mixer VCM-41 and Vertical Cutter Blender VCB-61 HALLDE • User Instructions...
Page 6
Vertical Cutter Mixer VCM-42 and Vertical Cutter Blender VCB-62 HALLDE • User Instructions...
SUPPLIER P.O. Box 1165, SE-164 26 KISTA, Sweden ADDRESS DECLARE UNDER OUR SOLE RESPONSIBILITY THAT THE FOLLOWING PRODUCTS: VCM-41, FP-41, VCM-42, FP-42, VCB-32, VCB/HCB-32, VCB-61, MODEL NAME VCB/HCB-61, HCM-61, VCB-62, VCB/HCB-62, HCM-62, SB-4, HB/FP-4. SERIAL NUMBER CONFORM TO THE FOLLOWING DIRECTIVES AND STANDARDS...