Introduction The TL-ANT2410MO, 2.4GHz 10dBi 2x2 MIMO Omni Antenna, can be used together with the outdoor wireless Base Station WBS210 to achieve a stable omnidirectional signal transmission. Specifications Electrical Specifications TL-ANT2410MO Frequency Range 2.35 to 2.55GHz Gain 10dBi VSWR 1.85 Max HPOL Beamwidth 360°...
For your own safety, please seek a qualified service technician for assistance. Package Contents Bolts with Nut and Lock RF Cables Washer Assemblies (Qty.2) (M8×110, Qty.4) Installation Guide 2x2 MIMO Omni Antenna TL-ANT2410MO Antenna Pole-mount Clamps Installation Guide (Qty. 2)
Installation Requirements Outdoor Wireless Base Station (sold separately) Wrenches Hardware Overview Polarization Identifications RF Connectors Bottom View Pole-mount Bracket Base Station Mount Bracket Base Station/Shroud Lock Release Lever Front View...
Hardware Installation 1. Attach the RF Cables to the Base Station. 2. Attach the Base Station to the Base Station Mount Bracket as follows: a. Align the mounting tabs on the back of the Base Station with the four mounting slots on the Base Station Mount Bracket. b.
Page 8
3. Connect the other ends of the RF Cables to the RF Connectors on the antenna as shown below. Note: For better antenna performace, it is recommended to connect Chain0 to H end and connect Chain1 to V end.
Page 9
4. Insert the four Bolts into the Pole-mount Bracket of the antenna.
Page 10
5. Attach the Pole-mount Bracket and Pole-mount Clamps to the top of the pole using four M8x110 Bolts with Nut and Lock Washer Assemblies. a. Slide a Pole-mount Clamp over each pair of Bolts. b. Secure each Pole-mount Clamp with Nuts and Washers. c.