Advertisement
Quick Links
Advertisement
Related Manuals for TP-Link TL-ANT2410MO
Summary of Contents for TP-Link TL-ANT2410MO
- Page 1 Installation Guide 2x2 MIMO Omni Antenna TL-ANT2410MO...
-
Page 3: Table Of Contents
Contents Introduction Specifications Safety Notice Package Contents Installation Requirements Hardware Overview Hardware Installation... -
Page 4: Introduction
Introduction The TL-ANT2410MO, 2.4GHz 10dBi 2x2 MIMO Omni Antenna, can be used together with the outdoor wireless Base Station WBS210 to achieve a stable omnidirectional signal transmission. Specifications Electrical Specifications TL-ANT2410MO Frequency Range 2.35 to 2.55GHz Gain 10dBi VSWR 1.85 Max HPOL Beamwidth 360°... -
Page 5: Safety Notice
For your own safety, please seek a qualified service technician for assistance. Package Contents Bolts with Nut and Lock RF Cables Washer Assemblies (Qty.2) (M8×110, Qty.4) Installation Guide 2x2 MIMO Omni Antenna TL-ANT2410MO Antenna Pole-mount Clamps Installation Guide (Qty. 2) -
Page 6: Installation Requirements
Installation Requirements Outdoor Wireless Base Station (sold separately) Wrenches Hardware Overview Polarization Identifications RF Connectors Bottom View Pole-mount Bracket Base Station Mount Bracket Base Station/Shroud Lock Release Lever Front View... -
Page 7: Hardware Installation
Hardware Installation 1. Attach the RF Cables to the Base Station. 2. Attach the Base Station to the Base Station Mount Bracket as follows: a. Align the mounting tabs on the back of the Base Station with the four mounting slots on the Base Station Mount Bracket. b. - Page 8 3. Connect the other ends of the RF Cables to the RF Connectors on the antenna as shown below. Note: For better antenna performace, it is recommended to connect Chain0 to H end and connect Chain1 to V end.
- Page 9 4. Insert the four Bolts into the Pole-mount Bracket of the antenna.
- Page 10 5. Attach the Pole-mount Bracket and Pole-mount Clamps to the top of the pole using four M8x110 Bolts with Nut and Lock Washer Assemblies. a. Slide a Pole-mount Clamp over each pair of Bolts. b. Secure each Pole-mount Clamp with Nuts and Washers. c.
- Page 12 For technical support and other information, please visit http://www.tp-link.com/support, or simply scan the QR code. © 2017 TP-Link 7106507066 REV1.0.0...