Installing A Gpu Card - Dell PowerEdge T630 Owner's Manual
Hide thumbs
Also See for PowerEdge T630:
- Owner's manual (176 pages) ,
- Getting started (2 pages) ,
- Owner's manual (221 pages)
Table of Contents
Advertisement
Figure 32. Removing and installing a GPU card
1.
GPU card
3.
GPU card power connector
5.
x16 connector
Next steps
1.
Install the filler brackets by performing the following steps:
a.
Align the slot on the filler bracket with the tab on the expansion card slot.
b.
Press the expansion card latch till the filler bracket locks into place.
NOTE: Filler brackets must be installed in empty expansion-card slots to maintain FCC
certification of the system. The brackets also keep dust and dirt out of the system and aid
in proper cooling and airflow inside the system.
2.
Close the two expansion card latches by pushing the latch until the latch snaps into place.
3.
Replace the expansion card holder.
4.
Install the cooling shroud.
5.
Follow the procedure listed in
Installing a GPU card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
After working inside your
2.
SLI data connector
4.
GPU card power connector
6.
expansion card latch (2)
system.
93
Advertisement
Table of Contents
Troubleshooting
