Support
Details
Ethernet media converter TP-LINK MC112CS allows to change electrical signals (Ethernet data stream) coming via typical STP/UTP cable into modulated light signal transmitted via one single-mode fiber.
Distinguishing features:
- 1 x Ethernet port 10/100 Mbps (RJ-45)
- maximum transmission distance - 20 km
- transmission via one single-mode fiber (WDM)
- LED indicators showing operating status
- easy installation (plug and play)
- power supply included
TP-LINK MC112CS is reliable media converter enabling the transmission of Fast Ethernet data stream in one single-mode optical fiber over distances up to 20 km. The media converter has one SC connector used to transmit and receive optical signals. It is possible due to the use of wavelength-division multiplexing technology (WDM) - different wavelengths of laser light carry different signals, over one strand of fiber. It significantly lowers installation costs
The device transmits optical signal in the II transmission window (1310 nm) and receives optical signal in the III window (1550 nm). Sensitivity of the receiver and output power of the transmitter are adapted to transmit optical information up to 20 km.
TP-LINK devices have MDI/MDIX auto detection feature and automatically find and set the fastest connection speed and mode. "Store and forward" mechanism allows to verify the received data using checksum function.
TP-LINK media converters are fully compatible with IEEE 802.3 and IEEE 802.3u standards. Their installation is very simple thanks to "Plug and Play" feature. The LED indicators show current operating status.
Specifications:
Name | Ethernet media converter TP-LINK MC112CS | |
Code | L11722 | |
Standards | IEE 802.3, IEEE 802.3u, IEE 802.3x | |
Transmission properties | Half/Full Duplex transfer (TX port) | |
WDM technology | ||
Full/Half Duplex Flow Control | ||
Interfaces | 1x10BASE-T | UTP 3,4,5 (max. 100m) EIA/TIA-568 STP 100 Ω (max. 100 m) |
1x100BASE-T | UTP 5, 5e (max. 100 m) EIA/TIA-568 STP 100 Ω (max. 100 m) | |
1x100BASE-FX | single-mode (SC) | |
WDM | TX | 1310nm |
RX | 1550nm | |
LED indicators | PWR, FDX/Col, LINK, SPD | |
Certificates | FCC, CE | |
Transmission windows [nm] | 1310, 1550 | |
Range [km] | 20 | |
Power | 230 VAC / 9VDC | |
Dimensions [mm] | 94.5x73x27 | |
Operating temperature [º] | 0-40 |
NOTICE!! It is not allowed to look directly at the fiber port when the device is plugged. The radiation invisible for the human eye can damage the retina!
Why to choose fiber optics:
- possibility of sending signal over long distances (low attenuation of optical fibers - e.g. for the wavelength of 1550 nm the attenuation is about 0.2 dB per kilometer, which means that the signal can be sent at a distance of 200 km - without regeneration)
- high-volume information transfer via single fiber
- resistance to electromagnetic interference
- resistance to weather conditions (humidity, electrostatic discharges and others)
- no tapping possibility
- low weight and small dimensions
TP-LINK media converters are widely used for the transmission of Ethernet signals over long distances and in areas exposed to harsh weather conditions. Optical fibers provide full electrical insulation and resistance to electromagnetic interference. TP-LINK Ethernet media converters are primarily used to connect building LANs (e.g. of scattered buildings of one corporation). Below there is a sample application of that converters.
Example application of TP-LINK media converters
Specifications
Product type | Media converter | ||
Brand | TP-Link | ||
Name | MC112CS | ||
Interfejs optyczny | |||
Transmission type | WDM – 1 fiber | ||
Fiber optic type | Single-mode | ||
Optical interface speed | MBps | 100 | |
wavelength | Tx | nm | 1310 |
Rx | nm | 1550 | |
Interfejs Ethernet | |||
Ethernet port | number | pcs. | 1 |
speed | MBps | 10/100 | |
connector type | RJ45 | ||
Others | |||
LEDs | PWR, SPD, LFP, FDX, Link Act | ||
Power supply | voltage | DCV | 9 |
Current capacity | A | 0,6 | |
Operating temperature | °C | 0...40 | |
Dimensions | mm | 94 × 73 × 27 |