0 Alternative products available

RRV4-65B-R6H4-V3

12-port sector antenna, 4x 694–960 and 8x 1695-2690 MHz, 65°HPBW, 6x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

All Internal RET actuators are connected in “Cascaded SRET” configuration
Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector

Specifications

General Specifications

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, mid band	8
RF Connector Quantity, low band	4
RF Connector Quantity, total	12

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	High band (4) \| Low band (2)
Power Consumption, active state, maximum	8 W
Power Consumption, idle state, maximum	1 W
Protocol	3GPP/AISG 2.0 (Single RET)

Click on image to enlarge.

Click on image to enlarge.

	R1,R2	R1,R2	R1,R2	Y1-Y4	Y1-Y4	Y1-Y4	Y1-Y4
Frequency Band, MHz	694–790	790–890	880–960	1695–1920	1920–2180	2300–2500	2500–2690
RF Port	1-4	1-4	1-4	5-12	5-12	5-12	5-12
Gain at Mid Tilt, dBi	14.9	15.3	15.4	17.1	18.1	18.6	18.7
Beamwidth, Horizontal, degrees	70	65	65	70	63	57	56
Beamwidth, Vertical, degrees	10.7	9.4	8.8	6.3	5.7	5	4.8
Beam Tilt, degrees	2–14	2–14	2–14	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	16	15	15	17	18	22	21
Front-to-Back Ratio at 180°, dB	31	31	32	34	32	32	32
Isolation, Cross Polarization, dB	27	27	27	27	27	27	27
Isolation, Inter-band, dB	26	26	26	26	26	26	26
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	300	300	300	250	250	250	250

Frequency Band, MHz	694–790	790–890	880–960	1695–1920	1920–2180	2300–2500	2500–2690
Gain by all Beam Tilts, average, dBi	14.8	15.1	15.2	17.1	18.0	18.5	18.5
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.4	±0.7	±0.8	±0.7	±0.4	±0.5
Beamwidth, Horizontal Tolerance, degrees	±7	±4	±5	±6	±8	±4	±4
Beamwidth, Vertical Tolerance, degrees	±0.8	±0.6	±0.7	±0.4	±0.4	±0.2	±0.2
USLS, beampeak to 20° above beampeak, dB	15	14	14	17	16	16	15
Front-to-Back Total Power at 180° ± 30°, dB	21	21	20	27	26	27	28
CPR at Boresight, dB	20	22	21	20	22	21	21
CPR at Sector, dB	12	8	7	10	8	7	4

Effective Projective Area (EPA), frontal	0.65 m² \| 6.997 ft²
Effective Projective Area (EPA), lateral	0.2 m² \| 2.153 ft²
Wind Loading @ Velocity, frontal	688.0 N @ 150 km/h (154.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	210.0 N @ 150 km/h (47.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	826.0 N @ 150 km/h (185.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	474.0 N @ 150 km/h (106.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system

Antenna Type	Sector
Band	Multiband
Color	Light Gray (RAL 7035)
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, mid band	8
RF Connector Quantity, low band	4
RF Connector Quantity, total	12

RET Hardware	CommRET v2
RET Interface	8-pin DIN Female \| 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	High band (4) \| Low band (2)
Power Consumption, active state, maximum	8 W
Power Consumption, idle state, maximum	1 W
Protocol	3GPP/AISG 2.0 (Single RET)

	R1,R2	R1,R2	R1,R2	Y1-Y4	Y1-Y4	Y1-Y4	Y1-Y4
Frequency Band, MHz	694–790	790–890	880–960	1695–1920	1920–2180	2300–2500	2500–2690
RF Port	1-4	1-4	1-4	5-12	5-12	5-12	5-12
Gain at Mid Tilt, dBi	14.9	15.3	15.4	17.1	18.1	18.6	18.7
Beamwidth, Horizontal, degrees	70	65	65	70	63	57	56
Beamwidth, Vertical, degrees	10.7	9.4	8.8	6.3	5.7	5	4.8
Beam Tilt, degrees	2–14	2–14	2–14	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	16	15	15	17	18	22	21
Front-to-Back Ratio at 180°, dB	31	31	32	34	32	32	32
Isolation, Cross Polarization, dB	27	27	27	27	27	27	27
Isolation, Inter-band, dB	26	26	26	26	26	26	26
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	300	300	300	250	250	250	250

Frequency Band, MHz	694–790	790–890	880–960	1695–1920	1920–2180	2300–2500	2500–2690
Gain by all Beam Tilts, average, dBi	14.8	15.1	15.2	17.1	18.0	18.5	18.5
Gain by all Beam Tilts Tolerance, dB	±0.7	±0.4	±0.7	±0.8	±0.7	±0.4	±0.5
Beamwidth, Horizontal Tolerance, degrees	±7	±4	±5	±6	±8	±4	±4
Beamwidth, Vertical Tolerance, degrees	±0.8	±0.6	±0.7	±0.4	±0.4	±0.2	±0.2
USLS, beampeak to 20° above beampeak, dB	15	14	14	17	16	16	15
Front-to-Back Total Power at 180° ± 30°, dB	21	21	20	27	26	27	28
CPR at Boresight, dB	20	22	21	20	22	21	21
CPR at Sector, dB	12	8	7	10	8	7	4

Effective Projective Area (EPA), frontal	0.65 m² \| 6.997 ft²
Effective Projective Area (EPA), lateral	0.2 m² \| 2.153 ft²
Wind Loading @ Velocity, frontal	688.0 N @ 150 km/h (154.7 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	210.0 N @ 150 km/h (47.2 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	826.0 N @ 150 km/h (185.7 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	474.0 N @ 150 km/h (106.6 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)