Get to Know Mesh Extenders 141ACM, 142ACM, 143ACM,

CBW141ACM CBW142ACM and CBW143ACM

Objective

The objective of this article is to get you more familiar with the Cisco Business Wireless (CBW) 141ACM Mesh Extender. CBW mesh extenders are used with a Primary Access Point (AP) in a CBW mesh network. If you are unfamiliar with the terms used, check out Cisco Business: Glossary of New Terms.

If you would like to learn the basics of CBW mesh networking, check out:

• Cisco Business: Welcome to Wireless Mesh Networking

Applicable Devices | Software Version

• 141ACM (Data Sheet) | 10.0.1.0 (Download latest)

Introduction

The latest CBW APs are 802.11 a/b/g/n/ac (Wave 2) based, with internal antennas. They support the latest 802.11ac Wave 2 standard for higher performance, greater access, and higher-density networks.

A CBW mesh network must include a functioning CBW Primary AP (140AC, 145AC, or 240AC) and at least one CBW Mesh Extender. This article is specific to the 141ACM mesh extender to be used in a mesh network.

Other mesh extenders are available for a CBW network include the 142ACM and the 143ACM (link article) Click on this link to learn more about the 142ACM and 143ACM mesh extenders. You have the ability to use any combination of CBW Access points as long as a Primary AP is configured and functional.

Prerequisites Before Adding a Mesh Extender

• An active internet connection
• The Cisco Business App, a QR code reader, or access to https://ciscobusiness.cisco
• A router (to act as your DHCP server)
• A CBW Primary Access Point (140AC/145AC/240AC) with mesh enabled

General CBW Mesh Extender Details

These specifications apply to all CBW mesh extenders:

Multiuser (MU) Multiple-Input Multiple-Output (MU-MIMO) - allows simultaneous data transmission to multiple 802.11ac Wave 2–capable clients to improve the client experience.

Managing the Network – You can configure and manage the network using a mobile application or through a standard web browser.

Authentication and Security - Wi-Fi Protected Access 2 and 3 (WPA2), 802.1X, RADIUS authentication, authorization, and accounting (AAA), 802.11r and 802.11i

Maximum number of associated wireless clients - 200 per Wi-Fi radio, for a total of 400 clients per access point

802.11ac - 2x2 MU-MIMO with two spatial streams, up to 867 Mbps, 20-, 40-, and 80-MHz channels, and Dynamic Frequency Selection

Data Rates Supported

• 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
• 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 5 and 4 Mbps
• 802.11n data rates on 2.4 GHz: 6.5 to 144 Mbps (MCS0-MCS15)
• 802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)

Available Transmit Power Settings

• 2.4 GHz up to 20 dBm
• 5 GHz up to 20 dBm

Integrated Antennas

• 2.4 GHz, gain 2 dBi
• 5 GHz, gain 3 dBi

Indicators - Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Environmental Conditions

• Operating

◦ Temperature: 32° to 104°F (0° to 50°C)

◦ Humidity: 10% to 90% (noncondensing)

◦ Maximum altitude: 9843 ft (3000 m) at 40°C

• Nonoperating (storage and transportation)

◦ Temperature: -22° to 158°F (-30° to 70°C)

◦ Humidity: 10% to 90% (noncondensing)

◦ Maximum altitude: 15,000 ft (4500 m) at 25°C

System

• 512 MB DRAM, 128 MB flash
• 710-MHz quad-core processor

Environmental Considerations - To ensure the best RF coverage for your access point, place your access point in an area as close to the wireless clients as possible and practical to do so.

Areas to avoid or places that may result in reduced range or performance are as follows.

• In a basement of a multi-story home or office. The signals must penetrate many walls.
• Near large obstructions that can block the radio signals. Avoid areas like metal cabinets or refrigerators.
• On the floor under a metal desk or other dense or conductive objects.

What’s in the 141ACM Box

• Cisco Business 141AC Mesh Extender
• Power Adapter
• Power cable
• Quick Start Guide
• Technical Support Contact List
• Pointer Card China RoHS
• Compliance Information (for EU SKU only)

Product Features

1. Status LED
2. 48V DC Port
3. Power ON/OFF Push Button
4. PSE-LAN1 Port
5. LAN2/LAN3/LAN4 Ports
6. USB Port (for future use)
7. Mode Button
8. QR Code
9. Kensington Lock Slot (on the side)

Unique Features of the 141ACM

The 141ACM mesh extender can be placed on any flat surface, such as a desktop, along with a cord to plug the extender into an outlet. It does not come with any mounting brackets.

This mesh extender comes with four local Gigabit Ethernet ports. This allows for a variety of connections.

One of the four ports on the 141ACM provides Power over Ethernet (PoE) and can power some Cisco MPP phones. This is the only mesh extender that includes a PoE port.

Conclusion

You now have a better understanding of the specifications for the 141ACM Mesh Extender. Want to learn more? Check out the following articles:

Objective

The objective of this article is to get you more familiar with the Cisco Business Wireless (CBW) 141ACM Mesh Extender. CBW mesh extenders are used with a Primary Access Point (AP) in a CBW mesh network.

If you would like to learn the basics of CBW mesh networking, check out:

• Cisco Business: Welcome to Wireless Mesh Networking

Applicable Devices | Software Version

• 142ACM (Data Sheet) | 10.0.1.0 (Download latest)
• 143ACM (Data Sheet) | 10.0.1.0 (Download latest)

Introduction

The latest CBW APs are 802.11 a/b/g/n/ac (Wave 2) based, with internal antennas. They support the latest 802.11ac Wave 2 standard for higher performance, greater access, and higher-density networks.

A CBW mesh network must include a functioning Primary AP (140AC, 145AC, or 240AC) and at least one CBW Mesh Extender. This article is specific to the 142ACM and 143ACM mesh extenders in a CBW mesh network.

One other mesh extender available for a CBW network is the 141ACM (link article) Use the content toggle at the top of the article to learn more about the 141ACM mesh extender. You have the ability to use any combination of CBW APs as long as a Primary AP is configured and functional.

Prerequisites Before Adding a Mesh Extender

• An active internet connection (cable or DSL)

• Download the Cisco Business App or access to https://ciscobusiness.cisco

• A Cisco small business PoE switch or PoE injector (802.3af PoE injector)

• A PoE-powered, mounted access point

• A Cisco small business router (to act as your DHCP server)

• A CBW Primary Access Point that is configured and functional

General CBW Mesh Extender Details

These specifications apply to all CBW mesh extenders:

Multiuser (MU) Multiple-Input Multiple-Output (MU-MIMO) - allows simultaneous data transmission to multiple 802.11ac Wave 2–capable clients to improve the client experience.

Managing the Network – You can configure and manage the network using a mobile application or through a standard web browser.

Authentication and Security - Wi-Fi Protected Access 2 and 3 (WPA2), 802.1X, RADIUS authentication, authorization, and accounting (AAA), 802.11r and 802.11i

Maximum number of associated wireless clients - 200 per Wi-Fi radio, for a total of 400 clients per access point

802.11ac - 2x2 MU-MIMO with two spatial streams, up to 867 Mbps, 20-, 40-, and 80-MHz channels, and Dynamic Frequency Selection

Data Rates Supported

• 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps

• 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 5 and 4 Mbps

• 802.11n data rates on 2.4 GHz: 6.5 to 144 Mbps (MCS0-MCS15)

• 802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)

Available Transmit Power Settings

• 2.4 GHz up to 20 dBm

• 5 GHz up to 20 dBm

Integrated Antennas

• 2.4 GHz, gain 2 dBi

• 5 GHz, gain 3 dBi

Indicators - Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Environmental Conditions

• Operating

◦ Temperature: 32° to 104°F (0° to 50°C)

◦ Humidity: 10% to 90% (noncondensing)

◦ Maximum altitude: 9843 ft (3000 m) at 40°C

• Nonoperating (storage and transportation)

◦ Temperature: -22° to 158°F (-30° to 70°C)

◦ Humidity: 10% to 90% (noncondensing)

◦ Maximum altitude: 15,000 ft (4500 m) at 25°C

System

• 512 MB DRAM, 128 MB flash

• 710-MHz quad-core processor

Environmental Considerations - To ensure the best RF coverage for your access point, place your access point in an area as close to the wireless clients as possible and practical to do so.

Areas to avoid or places that may result in reduced range or performance are as follows.

• In a basement of a multi-story home or office, as the signals must penetrate many walls.

• Near large obstructions that can block the radio signals. Avoid areas like metal cabinets or refrigerators.

• On the floor under a metal desk or other dense or conductive objects.

What’s in the 142ACM Box:

• Cisco Business Wireless Mesh 142AC Mesh Extender

• Quick Start Guide

• Technical Support Contact List

• Pointer Card China RoHS

• Compliance Information (for EU SKU only)

142ACM Product Features

1. Status LED
2. QR Code
3. Mode Button (on side)
4. Kensington Lock (on side)
5. AC Plug (Will vary by country)

Unique Features of the 142ACM

The 142ACM is the only mesh extender that is plugged into an AC outlet. It does not have an extra Ethernet port.

What’s in the 143ACM Box

• Cisco Business Wireless Mesh 143AC Mesh Extender

• Quick Start Guide

• Power Adapter

• Mounting Kit

• Technical Support Contact List

• Pointer Card China RoHS

• Compliance Information (for EU SKU only)

143ACM Product Features

1. Status LED
2. PoE-In Port
3. Type B USB Port (power supply)
4. QR Code
5. Mode button (on side)
6. Kensington Security lock Slot

Unique Features of the 143ACM

The 143ACM is the only mesh extender with a wall mount. It also contains one extra Ethernet port. That port does not deliver Power over Ethernet (PoE).

Intro to Mesh Mesh FAQ Cisco Business Wireless Model Decoder Reboot Tips Reset to Factory Default Day Zero:Configure Via App / Web Mobile App vs Web UI Best Practices for a Cisco Business Wireless Mesh Network Allow Lists Update Software Get Familiar with the CBW App Troubleshooting Time Settings Troubleshoot Red LED Bridge Group Names