Air-Eagle XLT single or multi-channel industrial remote control receivers by BWI Eagle use dry contact relay outputs to control equipment. They can receive signals up to two miles. Our receivers have SPDT dry contact relay outputs capable of switching AC or DC voltages up to five amps. Choose receivers with one, four, eight or 16 independent relays.
The default relay operation is maintained momentary, meaning the relay will remain energized while the button is pressed. Units can also be switched to a preconfigured toggle latching relay mode. All receivers can be custom-programmed for other relay operations.
- Up to a two-mile operating range
- One, four, eight or sixteen independent relays
- Operates on 900 MHz band
- Eight independent network frequencies
- AC and DC-powered models
- Custom programming is available for a variety of relay operations
- Proudly manufactured in the USA
- Works with Air-Eagle XLT Handheld, Contact Input or Voltage Input Transmitters
-
Configuration Sheets
Frequency
900 MHz spread spectrum
Relays
One, four, eight or 16 independent relays
Relay Contacts
SPDT 5 amp @ 120VAC or 30VDC
Relay Operation Mode
Models come standard with two relay operation modes – maintained momentary and toggle latching
Custom Programming
Receivers can be custom-programmed for any combination of relay operations, including but not limited to:
- Maintained momentary
- Toggle latching
- Latching
- Dual activation
- On or Off delay timers
RF Networks
Eight independent network frequencies
Operating Range
- Standard operating range up to 2,500 feet
- Extended operating range up to two miles with high-gain antennas and repeaters
Operating Temperature
-40° F to +185° F (-40° C to +85° C)
Housing & Protection
Varies by model
- IP66-rated, (NEMA 4) polycarbonate enclosure
- Hinged fiberglass with window (NEMA 4, 12, 13) enclosure
Power
AC and DC-powered models
Frequently Asked Questions
