*UPDATE 11-10-11* Apparently the design and sale of this mount has changed since my original review. It's now easier to install, and comes with an HDMI cable and level. Otherwise, most of my review still stands.
I was planning to make my own TV mount because all the affordable ones were so cheaply made. That was until I stumbled on this one for $25.
Wow, was I surprised when it arrived! Very nicely double-boxed and packaged extremely well. Then the construction is quality all the way, right down to the chrome-plated nuts, screws and bushings. This mount was manufactured and boxed as if it were a high-dollar item.
It only took about 15 minutes to have my 37" LG firmly hanging on the wall. Oh, and I did it all by myself.
I can't comment on the mount-to-TV screws because my LG already provided them. And I did use my own 5/16" flat washers on 2 of the lag screws since none were included, but that's just my preference.
I highly recommend this mount, I would have been happy to pay double for such quality.
Now, as usual, many of the reviews here are misleading:
*Dismiss all reviews that talk about adjacent studs, or difficulties getting screws to grab at an angle. This thing BOLTS TO A SINGLE WALL STUD VERY EASILY! Just like what's shown on the instruction sheet, you simply screw 3 of the lag screws down the center of the mount. That's all that's needed, the other holes are just a bonus for more complicated setups. DO NOT PUT 6 OR 7 LAGS INTO A STUD! You will probably shred or weaken it. Crash goes your TV while ripping a chunk of 2x4 through your drywall.
*Dismiss the reviews that mention short lag screws. They are 2", that's a depth of almost 1 1/2" into the stud after going through 1/2" drywall and the mount. If you drilled roughly 3/16" to 1/4" diameter pilot holes and didn't over-tighten your lags, it should be fine. I've mounted mine twice now, using the same (provided) lags.
*I have no idea where this review came from that complains about an adjustment knob getting in the way. My mount doesn't have any kind of knob on it whatsoever, perhaps they are commenting on a different model. There's a tilt adjustment, but it uses a wrench and doesn't protrude anywhere. The ONLY BAD PART I'VE FOUND is that cheap stamped sheet-metal wrench to tighten the tilt mechanism. No problem, I just used my own 13mm wrench instead.
*Yes, the mount can be somewhat stiff. Like another reviewer stated, just lubricate it. I used a few drops of 3-In-1 Oil in the joints.
*And bad reviews from people who didn't research or check to see if their TV or monitor is VESA compliant. That also includes the ones who didn't check to see if the mounting plate will block off their inputs. The plate is about 8 1/2" square, it shouldn't be that hard to see if you'll have a conflict. Besides, in the description it says, "Please make sure what mount your TV needs before you place order. If you are not sure, please send us a message. We will check for you." So they are giving a nice product bad reviews because they simply didn't read the description.
*Then all the complaints of trying to hold the TV to the mount while installing the screws. If you look at the pictures on Amazon you'll see the center screw hole is a "keyhole".
1. Hold the mount to the wall and mark the 3 hole locations on the wall. On the center keyhole you want to only mark the narrow slot at the top.
2. Drill (3) 3/16" holes.
3. Install center screw into the stud, but leave a small gap between the head and the drywall, you can even use the mount to test whether the slot in the "keyhole" passes behind the head.
4. Lay your TV face-down on a safe place like a mattress or a table with a comforter over it. Place the mount over the back of the TV and install screws.
5. Position the mount so the wall mounting plate is reasonably close to the TV and as close to center as possible, and simply hang it on the wall to the center lag screw through the keyhole. That should help with the weight while you screw the top lag in, then the bottom. Don't tighten anything completely until all 3 screws are in, then make sure it's level or plumb.
That's it. This is an inexpensive, very well built product that solves a simple problem. I'll be ordering more for my PC monitors and future customers ASAP.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Consider a similar item
Amazon's Choice
Frequently bought together
$19.99
Get it as soon as Saturday, May 11
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Carbon Neutral by Carbon Trust products reduce their carbon footprint year after year and any outstanding emissions are offset.
Climate Pledge FriendlyProducts with trusted sustainability certification(s). Learn morePRODUCT CERTIFICATION (1)
Carbon Neutral by Carbon Trust products reduce their carbon footprint year after year and any outstanding emissions are offset.
Compare with similar items
This Item  VideoSecu ML531BE2 TV Wall Mount kit with Free Magnetic Stud Finder and HDMI Cable for Most 26-55 TV and New LED UHD TV up to 60 inch 400x400 Full Motion with 20 inch Articulating Arm WT8 |  |  |  |  |  | |
| Price | $19.99 | $47.98 | $39.99 | -32% $16.99 Typical: $25.00 | $19.89 | -18% $26.99 List: $32.99 |
| Delivery | Get it as soon as Saturday, May 11 | Get it May 13 - 17 | Get it as soon as Saturday, May 11 | — | — | Get it as soon as Saturday, May 11 |
| Customer Ratings | ||||||
| Range of motion | ||||||
| Easy to install | ||||||
| Durability | ||||||
| Versatility | ||||||
| Quality of material | ||||||
| Sold By | Warehouseseller | Skakawack | Warehouseseller | Warehouseseller | Warehouseseller | Bestergo Direct |
| max compatible size | 65 inches | 32 inches | 70 inches | 80 inches | 32 inches | 60 inches |
| min compatible size | 26 inches | 10 inches | 37 inches | 23 inches | 19 inches | 26 inches |
| mounting type | Wall Mount | Wall Mount | Wall Mount | Wall Mount | Wall Mount | Single stud Wall Mount TV Bracket |
| movement type | Articulating, Tilt | Tilt, Articulating, Swivel | Tilt, Articulating, Swivel, Rotate | Tilt | Tilt, Articulating, Swivel | Articulating/Full motion/Swivel/Tilt/18.89 in Extension |
| maximum tilt angle | 15 degrees | 20 degrees | 12 degrees | 10 degrees | — | 8 degrees |
| material | Alloy Steel | Alloy Steel | Alloy Steel | Alloy Steel | Alloy Steel | Alloy Steel |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
2:34
Click to play video
Buying Guide: TV Mounts
Digital Trends
Videos for this product
1:27
Click to play video
Make Sure You Check This First. Could be a Problem
Daniel Anton
Videos for this product
0:56
Click to play video
Customer Review: Good but extension for larger tvs stick out
Jason C.
Reviews with images
Easy to Mount, sturdy, and comes with an assortment of hardware. Just remember you need a working stud finder (not included)!
This wall mount was especially easy to install. I used it to mount my 37" Toshiba Regza. At first I was a little bit nervous because I didn't realize how heavy my TV was until I picked it up to mount it, but the mount is extremely sturdy if it's properly fixed to the wall stud behind the wall. The only part that was a little bit time consuming was using a socket wrench (included) to fix the mount to the wall stud. It hurt my hands after a while- you can't just drill the mount with a power drill- but doing it as the instructions suggest equals a super sturdy wall mount.You should know before you buy this that you will need a stud finder that locates the wall studs behind the wall. I used the Zircon StudSensor Edge Finding Stud Finder which cost me $25 at the time but it appears it's $18 now. Be forewarned, you need to buy a 9 volt battery for the stud finder, which I didn't realize until I got it so it took me a little while before I was actually able to mount the TV. I say all this to say, buy the mount, the stud finder, and a 9 volt battery from the gate and you'll be able to mount this without an issue.The instructions were about 80% helpful. The company that makes these could hire a better technical writer and use better images, especially when it comes to adjusting the mount positioning after the TV is mounted. That being said, putting up the mount and figuring out how to adjust the positioning wasn't rocket science. All it takes is a little bit of common sense.The best thing about buying this mount is the fact that it comes with a wide assortment of screws and necessary hardware. You won't need to use all of the screws, but you can bet that if there's a type of screw you do need, it's already provided. The back of my TV was designed for a mount like this, but in the event your TV is made a little bit differently, with the mounting screws a little further apart, this mount comes with attachment pieces. The magnetic level that's included is an awesome bonus because even after I mounted the TV, making sure it was straight, I found a few other uses for the level. Also, it comes with an HDMI cord, which I didn't need but was kind of a cool addition. Bottom line, if you buy this mount (and have an effective stud finder + battery), the company that sells these things goes that extra mile to ensure that you're fully prepared to put it up.I'm giving this 5 stars because I was really pleased with the product. It didn't even deserve the deduction of a star for the 80% helpful instructions not being 100% helpful.The mount can be tilted up, down, left, and right; it can swivel; and it can be pushed back so that it ends up pretty close to the wall for that "straight-on" kind of position.I'm going to attach some pictures of the mount in use because I know when I'm reading reviews, it definitely helps to have a visual. The pic of the screws and hardware is missing the pieces that I used in the mount, for obvious reasons. I also included pics of the stud finder and battery that I used. Both were very helpful in installing the mount. As you can see, you don't need a "flat" tv for this mount, mine a little on the bulky side. And as mentioned in the instructions, you can even mount a TV with a curve. You can also mount this in drywall or concrete- there are instructions for both.Hope you found this review helpful.Buy this mount!
Top reviews from other countries
Miguel Sánchez del Pozo.
Fácil instalación pero considera que...
Reviewed in Mexico on April 14, 2020
