Alright here's the deal. You're going to buy this and it will probably be fine. I got one and it had a bad POE hat. They immediately shipped me a replacement POE kit so now I have spare parts. I ordered a second rack and it came with differently colored power lights. I didn't like that and asked for new ones so they immediately shipped those. Customer support is outstanding.
I saw some reviews saying this was difficult to assemble. Honestly, it's pretty easy. It's a little tricky to get the power button gasket to seat flush. I honestly didn't look at the instructions and it went smoothly.
If I ever can find more raspberry pis then I'll buy another one of these.
Add to your order
-
Coverage for accidental damage including drops, spills, and broken parts, as well as breakdowns (plans vary) -
24/7 support when you need it. -
Quick, easy, and frustration-free claims.
Cover this product:
3-Year Protection $28.99
4-Year Protection $38.99
Cover all of your eligible devices:
Asurion Complete Protect: One plan covers all eligible past and future purchases (Renews Monthly Until Cancelled) $16.99/month
Select a plan
Add to your order
- Coverage for accidental damage including drops, spills, and broken parts, as well as breakdowns (plans vary)
- 24/7 support when you need it.
- Quick, easy, and frustration-free claims.
Cover this product:
Select a plan
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Frequently bought together
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
0:18
Click to play video
Customer Review: Well made product with excellent support
Mav898989
Videos for this product
0:46
Click to play video
UCTRONICS Ultimate Rack with PoE Functionality
UCTRONICS
Product Description
UCTRONICS Pirack (U6145) is based on our latest Pi 4B rack-mount (U6143), we turned the adapter board that reroutes all those ports into a full-functioning Power Over Ethernet HAT, and it’s compatible with any PoE switches you got.
- Guide for display configuration on Home Assistant OS: bit.ly/Home-Assistant-for-Display
- You can also program the 0.91-inch OLED to show something else, please add the following boot-up script to read the stats (CPU/Memory load, IP address, temperature, etc. ).
- OLED Demo: github.com/UCTRONICS/U6143_ssd1306?Amazon
Open the rc.local file
sudo nano /etc/rc.local
Add command to the rc.local file(Note: The "pi" in the "cd /home/pi/U6143_ssd1306/C" is your username, if you have changed your username of raspberry pi, please change the pi in the command to your username)
cd /home/pi/U6143_ssd1306/C
sudo make clean
sudo make
sudo ./display &
Reboot your system.
Raspberry Pi Cluster Ideas
- Learn and experiment on Kubernetes, Docker Swarm, Serverless, Microservices, and Orchestration on bare metal.
- Build a testing environment for your cloud-native apps.
- Build a home server for web applications and databases.
- Build your own NAS or media center.
- Create a home automation system.
- Learn distributed computing and deployment from the ground up.
- Build private servers for numerous games.
Accessories SPECS
- Nuts: M2.5,
- Plastic standoffs: M2.5*18+6
- Chrome screws: M2.5*5
- Black screws: M2.5*8
|
|
|
|
|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 1U Front removable Rackmount for Jetson Nano | 3U Front removable RPi Rackmount | 2U Rackmount for Raspberry Pi 4B | Complete RPi Enclosure with PoE Function | Rpi Rackmount with Captive Screws | Pi Rack Pro for Raspberry Pi 4B | |
|
|
|
|
||||
| Customer Reviews |
2
|
1
|
— |
24
|
71
|
29
|
| Price | — | — | — | $249.99 | $59.99 | $269.99 |
| Size | 19"×1.75" | 19"×5.25" | 19"×3.5" | 19"×5.25" | 19"×1.75" | 19"×5.72"×1.75" |
| Compatible with | Nvidia Jetson Nano A02 B01/ 2GB Developer Kit | Raspberry Pi 3B/3B+, 4B | Raspberry Pi 3B/3B+, 4B | Raspberry Pi 4B, 3B+ | Raspberry Pi 3B/3B+, 4B | Raspberry Pi 4B; 2.5" SSD |
| Support up to | 4 | 12 | 8 | 5 | 5 | 4 |
| Main features | Front Removable Mounting Plate | More space for ventilation | Support up to 8 Units | With PoE hat, Power button and OLED display | Compatible with 5 SSDs and 5 Pis | 4 SATA shields & LCD display |
| SKU | U6258 | RM0011 | RM0009 | U624601 | U6264 | RM0004 |
From the brand
-
Only a few home labs today use 3D printing and acrylic to build Raspberry Pi clusters, which doesn't really meet the needs of your applications. Here at UCTRONICS, you will find a variety of flexible rack solutions for different projects.
Not only for Raspberry Pi, but also for Jetson Nano, Mac Mini, Intel NUC, etc. We will show you these different systems, and show you what we do with a lot of the project.
-
-
-
-
-
-
Compare with similar items
This Item  UCTRONICS Ultimate Rack with PoE Functionality for Raspberry Pi 4, 19" 1U Rackmount with PoE HAT, All IO on One Side, OLED Display, Power Switch, and Cooling Fan |  |  |  |  | |
| Price | $189.99 | $39.00 | $54.99 | $59.99 | -7% $269.99 List: $289.99 |
| Delivery | Get it as soon as Thursday, May 9 | Get it as soon as Tuesday, May 7 | Get it as soon as Monday, May 6 | Get it as soon as Monday, May 6 | Get it as soon as Tuesday, May 7 |
| Customer Ratings | |||||
| Easy to assemble | |||||
| Value for money | |||||
| Noise level | |||||
| Quality of material | |||||
| Sturdiness | |||||
| Sold By | UCTRONICS | UCTRONICS | UCTRONICS | UCTRONICS | UCTRONICS |
| size | 1U Ultimate Rackmount with PoE | 1U Rackmount | Support Up to 4 Pis and SSDs | 1U for 5 Rpis and 2.5" SSDs | — |
| hardware interface | ethernet | usb | — | usb | usb |
| compatible devices | Server | Server | Server | Server | Server |
| mounting type | Rack Mount | Rack Mount | Rack Mount | — | Rack Mount |
Reviews with images
Works as avertised - just be patient.
It took a lot of patience to get this mounted on my rack. Unfortunately, I had two Rasps handy. Otherwise, I would have installed all 4 and mounted in the rack and called it a project. In a couple of days, I have to pull it off my rack and mount the other two Rasps when they arrive. Have to deal with worldwide shortage of supplies.Now, onto the UCTRONICS. As I mentioned in the subject, it works as advertised. Please keep this in consideration when mounting the kit:1) hook the HDMI converter to the Rasp first.2) hook the SD card converter SD-Card Side and let the other side loose till the very end.3) when placing the hat, don't miss any of the pins.4) it worked best for me when i hooked the metal stadoffs in place without nuts.5) as you mount the set to the mount, first screw in the two screws for the hdmi converted. Don't tighten two hard.6) put the two screws at the bottom of the mount, move the rasps slightly to make sure the screws go through the Rasps and through the metal stadoffs. Don't tighten two hard.7) out the nuts on the top side of the standoffs and again don't tighten too hard.8) put the SD card in front if you plan to use the SD card converter cable.9) tightn everything now making sure the front plate looks alright and aligned with all.10) hook the SD Card converter cable., OLED cable, and Power cable to the hat.11) mount the unit to the rack.Please note for you to get best results, use approved Cat5e, Cat6 cables, and make sure your POE switch is not out of wattage/power.also note:1) you have to enable I2C in raspi-config to get the display to work.2) you have to build the app to power the OLED and include this app in auto start RC2.Local
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on April 4, 2023
Reviewed in the United States on March 30, 2022
Now, onto the UCTRONICS. As I mentioned in the subject, it works as advertised. Please keep this in consideration when mounting the kit:
1) hook the HDMI converter to the Rasp first.
2) hook the SD card converter SD-Card Side and let the other side loose till the very end.
3) when placing the hat, don't miss any of the pins.
4) it worked best for me when i hooked the metal stadoffs in place without nuts.
5) as you mount the set to the mount, first screw in the two screws for the hdmi converted. Don't tighten two hard.
6) put the two screws at the bottom of the mount, move the rasps slightly to make sure the screws go through the Rasps and through the metal stadoffs. Don't tighten two hard.
7) out the nuts on the top side of the standoffs and again don't tighten too hard.
8) put the SD card in front if you plan to use the SD card converter cable.
9) tightn everything now making sure the front plate looks alright and aligned with all.
10) hook the SD Card converter cable., OLED cable, and Power cable to the hat.
11) mount the unit to the rack.
Please note for you to get best results, use approved Cat5e, Cat6 cables, and make sure your POE switch is not out of wattage/power.
also note:
1) you have to enable I2C in raspi-config to get the display to work.
2) you have to build the app to power the OLED and include this app in auto start RC2.Local
Works as avertised - just be patient.
Reviewed in the United States on March 30, 2022
It took a lot of patience to get this mounted on my rack. Unfortunately, I had two Rasps handy. Otherwise, I would have installed all 4 and mounted in the rack and called it a project. In a couple of days, I have to pull it off my rack and mount the other two Rasps when they arrive. Have to deal with worldwide shortage of supplies.Reviewed in the United States on March 30, 2022
Now, onto the UCTRONICS. As I mentioned in the subject, it works as advertised. Please keep this in consideration when mounting the kit:
1) hook the HDMI converter to the Rasp first.
2) hook the SD card converter SD-Card Side and let the other side loose till the very end.
3) when placing the hat, don't miss any of the pins.
4) it worked best for me when i hooked the metal stadoffs in place without nuts.
5) as you mount the set to the mount, first screw in the two screws for the hdmi converted. Don't tighten two hard.
6) put the two screws at the bottom of the mount, move the rasps slightly to make sure the screws go through the Rasps and through the metal stadoffs. Don't tighten two hard.
7) out the nuts on the top side of the standoffs and again don't tighten too hard.
8) put the SD card in front if you plan to use the SD card converter cable.
9) tightn everything now making sure the front plate looks alright and aligned with all.
10) hook the SD Card converter cable., OLED cable, and Power cable to the hat.
11) mount the unit to the rack.
Please note for you to get best results, use approved Cat5e, Cat6 cables, and make sure your POE switch is not out of wattage/power.
also note:
1) you have to enable I2C in raspi-config to get the display to work.
2) you have to build the app to power the OLED and include this app in auto start RC2.Local
Images in this review
Top reviews from other countries
Abdul Noorzai Bin Abdul Samat
Neat and good
Reviewed in Singapore on January 20, 2022
Abdul Noorzai Bin Abdul Samat
Reviewed in Singapore on January 20, 2022
Images in this review
