This RAM is perfect for my application. I was running an AMD A10-7800 (3.5 - 3.9 GHz) with embedded Radeon R7 GPU and an 8GB module of single channel, 1600MHz, CL11, 1.35V value-RAM, and I wanted to add an 8GB module to get to 16GB. However, I have read that AMD APUs with embedded GPUs, work better with dual channel RAM (double bandwidth, 128 vs 64 bit), but that requires matched modules. Also, mismatched memory typically runs at it's worst value (lowest speed, highest CL, single channel, never mix different voltages). I found my motherboard would handle 1866MHz but there were no memory adjustments available in the BIOS. When I saw this RAM on sale for under $70 it looked too good to be true - higher speed, lower CL, dual channel, PnP, low profile heat spreaders. So I gave it a try. Results: I am really impressed with this memory. The PnP feature of this RAM was perfect (no BIOS adjustments required). After easy installation, CPU-Z showed the RAM clocked at 1866MHZ, CL10, 128 bit, 1.5V, dual channel mode. My overall benchmark score improved 25% & my graphics score improved 40%. My 3D modelling rotations are now completely fluid. I can now move between multiple open tabs on the internet very quickly (with background graphics running). All videos are smooth with no noticeable jitter. My Windows 10 system boots up and shuts down faster. My system is running very stable with this RAM (ie no system hang-ups, no unexplained re-boots, no BSOD). The heat spreaders on these modules are attractive, sturdy, low profile, and are not hot-to-the-touch while running. I have been using this RAM heavily for only 2 days so I cannot speak to long-term reliability, but the Kingston's life-time warranty allays any reliability concerns (keep receipt of purchase). However, just to be sure, I will keep my old 8GB module in an ESD bag just in case I ever need to send the new modules back for a warranty replacement.
Note: This RAM will automatically set itself to the highest speed allowed by the motherboard and CPU (up to 1866MHz). So if it only runs at 1600 or 1333 MHz in a given system, that is a CPU/motherboard limit, not a limit of this RAM. I have read that this memory will be stable when over-clocked up to 2400MHz, but that may require a slight voltage increase which I am unable to do in my BIOS.
Summary: I would highly recommend the Kingston HyperX Fury 16GB memory upgrade kit to anyone who has a DDR3 system with embedded GPU (graphics share system memory). AMD APU users should find the most benefit but those with Intel CPUs with embedded GPUs should also fare well.
| RAM | 8 GB DDR3 |
|---|---|
| Memory Speed | 1600 MHz |
