(Smooth arm movement) + High gloss aluminum material + Reliable price and excellent cost performance monitor arm.

With a gas spring for a smooth movement of 10.2 inches (26 cm) and a 15 degree angle adjustment (85 degrees upward/downward), you can adjust the monitor screen to the optimal position when the screen is facing facing the front of the screen. It is also effective as a countermeasure to relieve eye fatigue, neck pain, and stiff shoulders due to long periods of PC work.
In addition, the arms and base are made of aluminum for a distinct appearance that uses heavy steel or plastic parts.
In addition, we offer a reliable 3-year warranty at a reasonable price.


■FAQ

[Does the monitor arm move up and down not work properly, or if the position of the arm is lowered, it will return to the top of the range of motion. ]

Be sure to install it with your mo.
By balancing the power of the arm to lift the monitor and the weight of the monitor, you can stop the monitor in a free range of motion. When the monitor is not installed, the arm lifting force = upward force will always surpass and the monitor arm will stop moving to the top of the range of motion.

In addition, at its initial state, it is set up to 6.6 lbs (3 - 4 kg). Monitor arm will not work properly if you have a monitor weighing less than 2.0kg or more than 9.1kg. You need to use the monitor with the weight of 2.0-9.0kg.

[Does not stop in any position]

1. Move upwards when you release your hand from the monitor.
Depending on the weight of the monitor, the lifting power of the arm is winned. Turn the adjustment point in the middle of the arm to the negative direction and reduce the force of the arm to balance the monitor weight. Rotate the adjustment point about 1-2 times and move the monitor to release your hand and confirm the movement. Repeat this adjustment until it works properly. The adjustment point will not come out even if you turn it in any direction of the positive or negative direction. If you turn it to a point where you can't turn it any more, it will not be able to turn any more.
2. Release your hand from the monitor and it moves downward.
Please reverse the above.

[Monitor tilt (upward/downward) cannot be changed, hard]

The screen tilt adjustment is controlled by friction instead of gas spring, turning the adjustment point just behind the screen clockwise or counterclockwise around half the clockwise and move the monitor to release your hand and see the movement. Repeat this adjustment until it works properly. This adjustment point can be unscrewed by continuously turning counterclockwise (less friction). Please adjust the bolt to ensure it does not fall off.

[How long can you take the monitor at the highest or lowest level]

When the moo niter is at its highest level, the desk top is 15.4 inches (39 cm) from the center of the VESA plate and the same distance is 5.1 inches (13 cm) when lower. The distance from the desk top to the bottom of the monitor depends on the size of the monitor.

Lost screws:

Screw sizes are listed in the included instruction manual. They are interchangeable with identical screws sold at hardware stores.

(lost resin parts, the USB port has malfunctioned)

Only the initial defects are covered for support.