P10212-X21 HPE 3.84TB SFF NVMe PCIE SCN Read Intensive SSD Refurbished

The HPE P10212-X21 3.84TB SFF NVMe PCIe SCN Read Intensive SSD is designed for high performance and energy efficiency. Here are some ways in which it can help optimize power consumption and energy efficiency:

• NVMe Interface: The NVMe interface provides low latency and high-speed data transfer, which results in improved power efficiency compared to traditional SATA or SAS interfaces.
• Power Management Features: The SSD includes power management features that help to conserve power when the system is idle or under light load. For example, the device supports NVMe power states that allow it to enter a low-power mode when not in use.
• Energy Efficient Design: The HPE P10212-X21 is designed to be energy efficient, with a compact form factor and low power consumption. This helps to reduce the overall energy consumption of the system, leading to lower operating costs and a smaller carbon footprint.
• Optimized Firmware: The SSD firmware is optimized for energy efficiency, helping to reduce power consumption and improve performance. The firmware can be updated periodically to ensure that the device continues to operate at peak efficiency.
• System-level Power Management: The SSD can be used in conjunction with other power management tools and technologies at the system level to further improve energy efficiency. For example, using the device in combination with energy-efficient server hardware and virtualization technologies can help to reduce power consumption and improve overall energy efficiency.

Latency and response time are two important performance metrics for solid state drives (SSDs), including the HPE P10212-X21 3.84TB SFF NVMe PCIE SCN Read Intensive SSD.

Latency refers to the time it takes for an SSD to respond to a request for data, such as reading or writing data. Latency is typically measured in microseconds.

Response time, on the other hand, refers to the time it takes for an SSD to complete a specific task, such as reading or writing a certain amount of data. Response time is typically measured in milliseconds.

The specific latency and response time of the HPE P10212-X21 SSD will depend on several factors, including the type of request, the amount of data being transferred, and the specific configuration of the system in which the SSD is installed.

However, generally speaking, NVMe-based SSDs like the HPE P10212-X21 have lower latency and faster response times compared to traditional SATA-based SSDs, due to the more efficient and high-speed NVMe interface. The NVMe interface allows for parallel data transfer and more efficient command processing, which can result in improved performance.

It's worth noting that actual performance will depend on the specific use case and system configuration, and should be tested in a specific environment to determine the exact latency and response time.

The HPE P10212-X21 3.84TB SFF NVMe PCIe SCN Read Intensive SSD is a high-performance storage device designed for use in enterprise environments. It supports the following interface and connectivity options:

• NVMe Interface: The device supports the NVMe (Non-Volatile Memory Express) interface, which provides low latency and high-speed data transfer compared to traditional SATA or SAS interfaces.
• PCIe Connection: The SSD connects to the host system using a PCIe (Peripheral Component Interconnect Express) interface, which provides high-speed data transfer and low latency.
• Small Form Factor (SFF) Design: The device has a small form factor (SFF) design, which allows for installation in small form factor servers and workstations.
• Hot-Swappable: The SSD is hot-swappable, which means it can be replaced without shutting down the system. This provides increased flexibility and helps to reduce downtime.
• Dual Port Support: The device supports dual port connectivity, which provides redundancy and increased reliability.

General Information

• Manufacturer : HPE
• MPN : P10212-X21
• Spare Part Number: P10647-001
• Type : Internal Solid State Drive (SSD)
• SSD Type : NVMe

Technical Information

• Capacity: 3.84B
• Form Factor: 2.5 inch SFF
• NAND Flash Memory Type: Triple-Level Cell (TLC)
• Connectivity: Single Port
• Interface: PCI Express x4 (NVMe)
• Plug Type: Hot Pluggable
• Carrier Type: Smart Carrier NVMe (SCN)
• Workload Type: Read Intensive
• Bundled with: HPE Smart Carrier NVMe (SCN)
• Features: Digitally Signed Firmware (DS)
• Platform Supported: HPE ProLiant Rack/Tower/BladeSystem Servers/Synergy
• Height: 15.00 mm (0.60 inch)

Performance

• Lifetime Writes: 4480
• Endurance DWPD (Drive Writes Per Day): 0.60
• MAX Seq. Reads Throughput (MiB/s): 3000
• MAX Seq. Writes Throughput (MiB/s): 1500
• Random Read Average Latency uSec (4KiB,Q1): 130
• Random Write Average Latency uSec (4KiB,Q1): 25
• Random Read IOPS (4KiB, Q=16): 115000
• Random Write IOPS (4KiB, Q=16): 41500
• MAX Random Read IOPS (4KiB): 560000@Q256
• MAX Random Write IOPS (4KiB): 41500@Q1

Power Consumption

• Idle Time: 5.06 Watt
• Random Read: 6.70 Watt
• Random Write: 6.70 Watt
• Sequential Read: 6.70 Watt
• Sequential Write: 9.51 Watt
• Random Read/Write: 9.71 Watt
• Maximum: 9.71 Watt

Dimension and Weight

• Height: 0.63 inch
• Width: 3.10 inch
• Depth: 5.45 inch
• Weight: 1.50 lbs

Compatibility

• HPE ProLiant BL Series: BL460c Gen10 (2.5inch)
• HPE ProLiant DL Series: DL325 Gen10 (2.5inch), DL325 Gen10 Base (2.5inch), DL325 Gen10 Entry (2.5inch), DL325 Gen10 Performance (2.5inch), DL325 Gen10 SMB Solution (2.5inch), DL325 Gen10 Solution (2.5inch), DL360 Gen10 (2.5inch), DL360 Gen10 All Flash Server for Datera (2.5inch), DL360 Gen10 Base (2.5inch), DL360 Gen10 Entry (2.5inch), DL360 Gen10 High Performance (2.5inch), DL360 Gen10 Low (2.5inch), DL360 Gen10 Network Choice (2.5inch), DL360 Gen10 Performance (2.5inch), DL360 Gen10 Remote Office Branch Office Server for Cohesity DataPlatform (2.5inch), DL360 Gen10 SMB (2.5inch), DL360 Gen10 SMB Network Choice (2.5inch), DL360 Gen10 Solution (2.5inch), DL380 Gen10 (2.5inch), DL380 Gen10 All Flash Server for Datera (2.5inch), DL380 Gen10 Base (2.5inch), DL380 Gen10 Entry (2.5inch), DL380 Gen10 Entry SMB (2.5inch), DL380 Gen10 for Cohesity DataPlatform (2.5inch), DL380 Gen10 High Performance (2.5inch), DL380 Gen10 Hybrid Server for Datera (2.5inch), DL380 Gen10 Network Choice (2.5inch), DL380 Gen10 Network Choice for CTERA (2.5inch), DL380 Gen10 Network Choice for SAP HANA Compute Block (2.5inch), DL380 Gen10 NVMe All Flash Server for Datera (2.5inch), DL380 Gen10 Performance (2.5inch), DL380 Gen10 SMB (2.5inch), DL380 Gen10 SMB Networking Choice (2.5inch), DL380 Gen10 Solution (2.5inch), DL388 Gen10 (2.5inch), DL560 Gen10 (2.5inch), DL560 Gen10 Base (2.5inch), DL560 Gen10 Entry (2.5inch), DL560 Gen10 Performance (2.5inch), DL580 Gen10 (2.5inch), DL580 Gen10 Base (2.5inch), DL580 Gen10 Entry (2.5inch), DL580 Gen10 Performance (2.5inch)
• HPE ProLiant ML Series: ML350 Gen10 (2.5inch), ML350 Gen10 Base (2.5inch), ML350 Gen10 Entry (2.5inch), ML350 Gen10 High Performance (2.5inch), ML350 Gen10 Performance (2.5inch), ML350 Gen10 SMB (2.5inch), ML350 Gen10 Solution (2.5inch), ML350 Gen10 Special Server (2.5inch), ML350 Gen10 Sub-Entry (2.5inch)