- Suitable for signal
- Uses connector standards used for PLC
- Can be used for a motor control device
- Suitable for EMI countermeasures
- Can be used for SCSI
- Wire connection by soldering
- Contact is gold-plated
- Connector connection is fixed with dedicated screws
- Connector can be attached / detached with one touch
Rectangular Connectors (10120-3000PE)
IEEE1284 Half-Pitch, Plug, EMI-Shielded, Solder Terminals
Manufactured by Sumimoto 3M. High-speed Transfer Supporting Solder Model Half-pitch I/O Connector.
● This is a male connector that can be connected to the cable by soldering. Electric wires up to AWG24 (0.2 mm2) can be connected.
Rated Current: 0.5A Rated Voltage: 150V AC
Compatible Electric Wire Size: AWG24 – AWG30 or 0.2 mm2 – 0.05 mm2
· Pay attention to the cable finished outer diameter. The cable may not be able to pass through the connector hood.
· 101XX-3000PE soldered parts are gold flash plated
· 101XX-3000VE soldered parts are solder plated
Edit Part Configuration
Product Specifications
Specifications
Model Number | Number of Cores | Weight g |
10114-3000PE | 14 | 3.3 |
10120-3000PE | 20 | 4.2 |
10126-3000PE | 26 | 5.1 |
10136-3000PE | 36 | 6.6 |
10150-3000PE | 50 | 8.8 |
More Information
Material / Finish
Component Parts | Material | Finish |
Contact | Copper Alloy | Underlay: Nickel Plating Contact Part: Gold Plating Soldered Part: Gold Flash Plating |
Body | Glass Reinforced Polyester UL94V-0, Black | — |
Shell | Steel | Nickel-plated |
Part Numbers
Loading...
Standard Specifications
Compatible Manufacturers and Series Names
Manufacturer Name | Series Name |
---|---|
AMP | CHAMP 50 |
Hirose Electric Co., Ltd. | DXM (Note) |
Japan Aviation Electronics Industry, Ltd. | TX10 |
Honda Tsushin Kogyo Co., Ltd. | NPC |
DDK Ltd. | DHA |
Fujitsu Limited | 240R Type |
Yamaichi Electronics Co., Ltd. | NCS/NCP |
(Note) Please note that these are not compatible with the DX Series by Hirose Electric Co., Ltd.
Contact Arrangement Diagram
Connector x Hood Combination Table
EMI Countermeasure Plastic Hood One-touch Lock | EMI Countermeasure Metal Hood One-touch Lock | EMI Countermeasure Plastic Hood Screw Fastening | General-purpose Plastic Hood Screw Fastening | General-purpose Plastic Hood One-touch Lock | |||
---|---|---|---|---|---|---|---|
103** -3210-00 | 103** -A200-00 | 103** -52S0-00S | 103** -52A0-008 | 103** -52F0-008 | |||
Male | Pressure Welding Type Connector | 101** -6000EL | ○ | ○ | ○ (Except 68-core) | ○ (Except 68-core) | ○ (Except 68-core) |
Female | Solder Type Connector | 101** -3000PE | x | x | ○ | ○ | ○ |
Pressure Welding Type Panel Mount | 102** -0200EL | x | x | x | x | x |
○ = Combination available x = Combination unavailable
・Connectors can be coupled if they have the same core numbers and are a combination of male <--> female.
・Connectors can be coupled if they have the same core numbers and are a combination of male <--> female.
Compatible Wire
Type | AWG |
---|---|
Pressure Welding Type Male Connector | AWG28 stranded wires or 0.08 mm2 stranded wires (Coating OD 0.70 mm or less) and navy fixed type cables can be used. * Flat cables cannot be used. (Note) |
Solder Type Male Connector | AWG24 ~ 30 or 0.2 mm2 ~ 0.05 mm2 (Flat cables cannot be used.)* Pay attention to the finished OD of the cables. |
Pressure Welding Type Panel Mount (Female) | AWG28 or 0.08 mm2, 1.27 mm Pitch Flat Cables (Loose wires cannot be used.)* |
Rating
Item | Specification | Conditions |
---|---|---|
Current | 0.5 A or less | Allowable current between coupled contacts |
Voltage | 150 VAC / 200 VDC or less | Refers to the maximum DC or AC voltage (effective value) that can be continuously applied under the rated ambient temperature |
Ambient Temperature | -55°C ~ +85°C | Refers to the temperature range that can be used continuously under maximum load conditions |
Electrical Properties
Item | Characteristics | Conditions |
---|---|---|
Contact Resistance | Initial value of 35 mΩ or less For contact after mechanical testing or environmental testing increased resistance value must be 25 mΩ or less |
Includes bulk resistance of contacts. 1.5 mA resistance measured current and 20 mV release voltage based on the voltage-drop testing method. (Based on combination with half pitch connectors by Sumitomo 3M) |
Insulation Resistance | 500 MΩ or more | Apply 500 VDC between the adjoining contacts and measure the resistance after 1 min. |
Voltage Resistance | No arc dielectric breakdown | Apply 500 VAC between the adjoining contacts for 1 min. Leakage current is 1 mA at the time of measurement. |
Mechanical Properties
Item | Characteristics | Conditions |
---|---|---|
Contact Retention Force | 1 kg or more (Pressure welding type panel mount is 0.8 kg or more) |
Measure the contact retention force when tension is applied at the speed of 5 mm / min between the connector body and the installed contact. |
Insertion and Extraction Force Per Single Pole | ・ Insertion Force: 150 g or less / Extraction Force: 40 g or more |
The total insertion / removal force for plug / panel mount insertion / removal applied to a single pole is adopted as the single-pole insertion / removal force. (Based on combination with plugs by Sumitomo 3M) Insertion / Extraction speed is 5 mm / min. |
Vibration Test | 1) 1 μsec or less instantaneous disconnection 2) Meets electrical & mechanical properties |
10 ~ 55 HZ, insertion & extraction for 1 min, 1.52 mm amplitude or 10 G in XYZ directions for 2 hours each |
Impact Test | 1) 1 μsec or less instantaneous disconnection 2) Meets electrical & mechanical properties |
50 G, 11 msec XYZ directions, 3 times each (18 times total) MIL-STD-202E201A |
Solvent Resistance | 1) Indication is clear 2) Meets the electrical & mechanical properties |
3 min of ultrasonic cleaning in Freon 1-1-1 Trichloroethane solvent MIL-STD-202E213B |
Durability | 1) Meets the electrical & mechanical properties However, initial values at insertion and extraction must be ±20% |
50 times of insertion and extraction (Speed at 360 ~ 600 times / hr.) MIL-STD-202E215 |
Environmental Resistance Properties
Item | Test Conditions | Standards Compliance |
---|---|---|
Humidity Test | 10 Cycles (-10°C ~ +65°C, 95% RH) | MIL-STD-202E106D |
Salt Spray Test | 35°C, 5% concentration, 48 hr. | MIL-STD-202E101D |
Thermal Shock Test | 5 Cycles of -55°C --> +25°C --> +85°C --> +25°C | MIL-STD-202E107D |
Humidity Test (Regulated Temperature) | 40°C, 95% RH, 96 hr. | MIL-STD-202E103D |
High Temperature Life Test | 85°C, 1,000 hr., rated current x 110% rated current | MIL-STD-202E108D |
H2S Gas | Concentration 3±1 PPM, 40°C, 70 ~ 85% RH, 96 hr. | JEIDA-25-1974 (Except for Solder Plug) |
Products like this...
Additional Products in this Category
- Rectangular Connectors - MIL, Plug, Straight, Level Model for Circuit Board Installation
- Rectangular Connectors - D-Sub, EMI-Shielded, Resin Hood, General Purpose
- Rectangular Connectors - MIL, Press-Fit Hood
- Rectangular Connectors - Centronics, Plug, EMI-Shielded, Press-Fit, Spring-Lock, Hooded
- Rectangular Connectors - D-Sub, Plug, Hood, EMI Shielded, CTH Series
- Rectangular Connectors - D-Sub, Shielded, with DIP Terminals, XM3-L/XM2-L/XM4K/XM4L Series
- HIF6H Series 0.635 mm Pitch Cable Crimping Connector
- Han, Industrial Connector, Insert, 35 A (Pebble Gray)
Your comments help us improve our website. Give feedback