Fits 1959-1964 Impala, Biscayne, Bel Air with V8 engine. - Moderate to mild sound
This mandrel-bent exhaust system is custom designed for 1959-1964 Chevrolet Impala, Biscayne and Bel Air models and is perfect for the person looking for true dual exhaust system. The exhaust system includes all the necessary tubing to the rear axle and does Not include mufflers. This gives you the freedom to choose the sound level of Flowmaster performance mufflers you desire for your vehicle. System features include all mandrel-bent 2.50-inch stainless steel tubing with hangers welded in pre-designated areas to help ease installation and includes short turnouts that exit in front of the rear wheels. Be sure to check out our optional over the axle tailpipe kit #81055 (sold separately) if you want to run the tailpipes out the back of the car. This system includes easy to follow installation instructions and is covered by our Lifetime Limited Warranty. Notes: Does Not include mufflers or header cone adapters. Requires 2.50-inch Offset Inlet/Same side Offset Outlets such as part # 942549 (Super 44 Series) or 942544 (40 Delta Flow) if using an oval case muffler, or for an old school sound a pair of stainless steel Super HP2 mufflers like part # 12518304 or # 12518409, or the FlowFX muffler # 71415.
This mandrel-bent exhaust system is custom designed for 1959-1964 Chevrolet Impala, Biscayne and Bel Air models and is perfect for the person looking for true dual exhaust system. The exhaust system includes all the necessary tubing to the rear axle and does Not include mufflers. This gives you the freedom to choose the sound level of Flowmaster performance mufflers you desire for your vehicle. System features include all mandrel-bent 2.50-inch stainless steel tubing with hangers welded in pre-designated areas to help ease installation and includes short turnouts that exit in front of the rear wheels. Be sure to check out our optional over the axle tailpipe kit #81055 (sold separately) if you want to run the tailpipes out the back of the car. This system includes easy to follow installation instructions and is covered by our Lifetime Limited Warranty. Notes: Does Not include mufflers or header cone adapters. Requires 2.50-inch Offset Inlet/Same side Offset Outlets such as part # 942549 (Super 44 Series) or 942544 (40 Delta Flow) if using an oval case muffler, or for an old school sound a pair of stainless steel Super HP2 mufflers like part # 12518304 or # 12518409, or the FlowFX muffler # 71415.
- Exits Out the Sides in Front of the Rear Wheels
- Mandrel-bent for Maximum Performance
- Designed for Same Side Off-set Mufflers
- 16-gauge Stainless Steel Tubing
- Connects at Header Collectors
- Lifetime Limited Warranty
- Mufflers Sold Separately
- Includes Hangers
Information:
"Fits 1959-1964 Impala, Biscayne, Bel Air with V8 engine. Mufflers Sold Separately, Use 2.50-inch Offset Inlet/Same Side Offset Outlet Oval Case Mufflers, or Center/Center Round Case Mufflers.Application Summary:
| Year | Make/Model |
|---|---|
| 1959-1964 | Chevrolet Bel Air |
| 1959-1964 | Chevrolet Biscayne |
| 1959-1964 | Chevrolet Impala |
| Attributes | |
| 2WD/4WD | 2WD |
| ASIN | B007QVQ0LO |
| Brand | Flowmaster |
| Bullet Point #1 | Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 | No mufflers in pipe kit |
| Bullet Point #3 | Header-back System |
| Bullet Point #4 | DOS |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Color | Gray |
| Country of Origin (Primary) | US |
| Emission Code | 3, Off Road |
| Exhaust Series | Pipes Only |
| Exhaust Type | Dual |
| Exit Position | Dual Side, Dual Side Exit |
| Exit Style | Turn Down |
| GTIN | 00700042024889 |
| Harmonized Tariff Code (Schedule B) | 8708925000 |
| Hazardous Material Code | N |
| Heat Shield | No |
| Heat Shield Attached | No |
| Inlet Inside Diameter | 2.500 in. |
| Inlet Inside Diameter (in.) | 2.5 |
| Inlet Size (in.) | 2.5 |
| Life Cycle Status Code | Available to Order |
| Material | Stainless Steel, 409 Stainless Steel |
| Muffler Type | None |
| NAFTA Preference Criterion Code | B |
| Outlet Outside Diameter | 2.500 in. |
| Outlet Outside Diameter (in.) | 2.5 |
| Outlet Size (in.) | 2.5 |
| Product Type | Exhaust Accessories, Exhaust System |
| SDR Required Flag | N |
| SDS Sheet Number | N |
| Single Dual | Dual |
| Single or Dual | Dual |
| Sound Level | Pipe Only |
| System Type | Pipe, Pipe Kit |
| Tail Pipe Diameter | 2.500 in. |
| Tip Diameter | N/A |
| Tip Quantity | Not Included |
| Tip Size | N/A |
| Tubing Diameter | 2.500 in. |
| Tubing Diameter (in) | 2.5 |
| Warning | California Proposition 65 |
| Warranty Time | 12 |
Flowmaster 817413 59-64 IMPALA HB PIPE KIT 409S
Product Information
- Brand: Flowmaster
- Product Number: 817413
Vehicle Fitment
|
Cancer and Reproductive Harm - www.P65Warnings.ca.gov |