KTM 690 Enduro R

“Rumi” Specifications

Engine

  • Engine: Liquid-cooled DOHC single
  • Displacement: 690cc
  • Bore x stroke: 102 x 84.5mm
  • Maximum power: 67 hp @ 8000 rpm
  • Maximum torque: 55 ft/lbs @ 6000 rpm
  • Compression ratio: 12.6:1
  • Muffler: Stainless steel
  • Fuel system: Keihin EFI w/ 46mm throttle body
  • Lubrication: Pressure lubrication with two pumps
  • Engine oil: Motorex, SAE 10W-60
  • Engine management: Ride-by-wire Keihin EMS
  • Clutch: APTC slipper clutch, hydraulically operated
  • Transmission: 6-speed
  • Chain: X-Ring 5/8 x 1/4″
  • Battery: 12V, 8.6Ah

Chassis

  • Frame: Powdercoated chromoly trellis
  • Handlebars: Tapered aluminum, 28-22 mm
  • Front suspension: 48mm inverted WP forks; 9.8 inches of travel
  • Rear suspension: WP shock; 9.8 inches of travel

Tyres, Brakes & Wheels

  • Front: 90/90 x 21
  • Rear: 140/80 x 18
  • Front: 300mm disc w/ Brembo 4-piston floating caliper
  • Rear: 240mm disc w/ Brembo 2-piston floating caliper
  • ABS: Bosch 9M+ Two Channel, disenengageable (off-road mode optional)
  • Front: Wire-spoked w/ aluminum rim, 1.85 x 21″
  • Rear: Wire-spoked w/ aluminum rim, 2.50 x 18”

Dimensions

  • Rake: 27 degrees
  • Wheelbase: 59.2 inches / 150cm
  • Ground clearance: 11.0 inches / 28cm
  • Seat height: 35.8 inches / 90cm HOWEVER this has been lowered = 85cm
  • Tank capacity: 3.2 gallons / 12 L (+ 17L extra including safari tank)
  • Dry weight: 309 pounds / 140.16kgs

Extras / Accessories

  • Tyre pressure sensor
  • Bash plate
  • Luggage rack (side & back)
  • Exhaust
  • Yenkro tower (prototype)
  • Safari fuel tank
  • Phoenix custom seat
  • Radguard Shorty levers
  • Vanasche Case saver
  • Vanasche Fuel filler
  • Garmin Zumo XT mount + RAM balls
  • Double Take mirrors
  • Heated jacket electrical loom
  • 12V plug
  • Light bar
  • Radiator protector
  • KTM pick up knobs
  • New side stand foot (shortened & widened)
  • Arcebis hand guards
  • Oxford heated grips (future mod)
  • Lowered suspension (extra low!)