NETGEAR RBKWM-10000S Orbi Wall Mount Orbi WiFi Route
Specifications
- Product Dimensions
6.89 x 5 x 4.88 inches - Item Weight
6.9 ounces - Frequency Band Class
Single-Band - Wireless Communication Standard
802.11ax - Connectivity Technology
Wi-Fi - Material
Industrial-grade plastic - Brand
NETGEAR
Introduction
By mounting all supported Orbi units to any vertical surface, the Orbi Wall Mount Kit stabilizes all supported Orbi units. This reduces signal interference for you and guards against spills or tip-overs that could cause damage. You may also clear up space on your household surfaces using the Orbi Wall Mount Kit to get rid of clutter. In addition to improving WiFi performance and aesthetics, the Orbi Wall Mount Kit mounts and stabilizes your desktop Orbi units on practically any vertical surface. You can experience reduced signal interference while preventing tip-overs and water damage from spills with this simple-to-install mounting kit.
What’s In the Box?
- One (1) Orbi wall mount cover
- One (1) Orbi wall mount bracket
- One (1) Orbi cradle for select Orbi products
- One (1) screw kit
- One (1) wall mount anchor set
- Quick start guide
Install the wall mount with the cradle
You must prepare the wall mount before following these instructions. For more information, see Prepare the wall mount on the other side of this quick start guide. If you need to use the cradle but your Orbi product is too small for the cradle, see Install the wall mount with the cradle for smaller Orbi products.
Note
These instructions show the Orbi AC3000 Tri-band WiFi System (model RBK50)
Install the wall mount with the cradle for smaller Orbi products
You can adjust the cradle to fit smaller Orbi products. You must prepare the wall mount before following these instructions. For more information, see Prepare the wall mount on the other side of this quick start guide.
Note
These instructions show the Orbi Tri‑band WiFi System (model RBK20).
Package contents
Note
The bracket and cover come preattached.
Prepare the wall mount
IMPORTANT
You can only install the wall mount vertically on a wall. Do not install the wall mount horizontally or on the ceiling.
Determine if your wall mount needs the cradle
If your Orbi model has mounting holes on the bottom, you can install the wall mount without the cradle.
Wall mount without the cradle
For more information about this setup, see Install the wall mount without the cradle.
Wall mount with the cradle
For more information about this setup, see one of the following sections on the other side of this quick start guide
- Install the wall mount with the cradle.
- Install the wall mount with the cradle for smaller Orbi products.
Install the wall mount without the cradle
Use this method to install Orbi models with mounting holes on the bottom.
Note
These instructions show the Orbi WiFi 6 System AX6000 (model RBK852).
Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at community.netgear.com
Regulatory and Legal
(If this product is sold in Canada, you can accessn this document in Canadian French at
https://www.netgear.com/support/download/)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit
https://www.netgear.com/about/privacy-policy
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https://www.netgear.com/about/terms-and-conditions If you do not agree, return the device to your place of purchase within your return period.
NETGEAR, Inc
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.
Frequently Asked Questions
face plate is 3″ x 5″. the back of the Orbi is 2.5 ” from the wall. The entire apparatus sits 5″ from the wall (5″ wall to front of Orbi.
From the looks of that model they appear similar to the 853 which we have. So if the dimensions are the same they should fit.
Yes, the wall mount will work with all of the full-sized Orbi units.
Yes this mount will fit both the Orbi 5 and the Orbi 6 units (including the RBK653)
I actually just used 3M command strips so that I didn’t have to put any holes in wall. Has been working great.
Yes, this wall bracket is adjustable and will fit the RBK852.
Yes, it should. The RBK852 (listed as supported in the title) is the kit containing the RBR850 router and RBS850 satellite. Pretty sure I tested it myself, but I had to return the mount for another reason so can’t confirm (I intended to use it with an RBKE960, which does *not* fit).
Yes, this fits all the Orbi WiFi 5 and WiFi 6 units.
Yes, the wall mount is adjustable and will fit the RBS750.
No, but the outdoor Orbi come with it’s own wall bracket it hangs from.
Don’t know, but it not only won’t let you order more than two initially, but it won’t let you order more in the future either. I ordered my additional one from the Open Box section and got what appeared to be an unopened one so I lucked out.
It might be. I am mounted mine just above the electrical outlet so there’s minimal wiring to see. You can mount it just below an outlet so that the Orbi itself blocks the outlet nicely.
NETGEAR-authorized Orbi Wall Mount. NETGEAR Warranty is offered when a reseller is authorized to sell the item. By installing Orbi desktop units on any vertical surface, the Orbi wall mount kit stabilizes Orbi desktop units. Enjoy reduced signal interference while avoiding spills or tip-overs that could cause damage.
Use the included screws to secure your Orbi router or satellite to the mount base after placing it there. Connect the mount base with the mount cover. To fasten the wall bracket to the wall, use wall anchors and screws. Onto the wall bracket, slide the mount base.