DELL WR110 Universal Pairing Receiver
Overview
Dell Pair supports the following:
- Detect Dell peripheral devices like mouse and keyboard when they are within detection range to pair via Bluetooth
- Seamlessly pair devices through Bluetooth.
NOTE: Dell Pair user guide is common to all supported Dell peripherals. For features specific to the device, please refer to the product user guide.
Supportability
Dell Pair comes pre-installed on the following Dell Systems. If you uninstall Dell Pair manually and would like to re-install it again, please follow the instructions mentioned in Download and installation section of this user guide. Dell Pair is supported on Dell PC with BLE 5.0 configuration and BLE supported Dell Peripherals.
Supported Platforms
Latitude
- Latitude 7320
- Latitude 7420
- Latitude 7520
- Latitude 7330
- Latitude 7430
- Latitude 7530
- Latitude 9330
- Latitude 9430
Precision:
- Precision 5470
- Precision 5570
- Precision 5770
- Precision 7670
- Precision 7770
XPS Notebook:
- XPS 9315
- XPS 9320
- XPS 9520
- XPS 17 9720
Supported OS
- Windows 10, Build version 10.0.19041 and above
- Windows 11
Download and installation
Dell Pair comes pre-installed on your Dell System. All supporting documents for Dell Pair can be found in www.Dell.com/support/dellpair/ To manually download and instal, please go to Dell support website for Dell Pair.
- Open Dell support home page: https://www.dell.com/support/home/en-us/
- In the ldentify your product’ search menu, search for the PC model name (Example: Latitude 7320), which directs user to Platform page for Latitude 7320.
- In ‘Drivers & Downloads’ section, select ‘Find Drivers’ ‘Category’ “Application”. From the list, Dell Pair executable can be downloaded.
Installation:
Please follow the installation steps as prompted in the installation screen.
Command line installation:
- Open command prompt
- In command prompt, point to the directory where Dell Pair executable has been downloaded
- Type the command for installation: DellPair-Setup-x64.exe
- If installation is required to run silently type the command: DellPair-Setup- x64.exe /S
- To run installer with logging feature, type the command:
- DellPair-Setup-x64.exe /S/vLOGFILE=” Full_path_with_Filename”
Uninstallation
To uninstall, go to windows start menu and navigate to folder ‘Dell’. Select uninstall of Dell Pair after right clicking on it and follow the prompts.
Command line uninstallation
- Open command prompt
- In command prompt, point to the directory where Dell Pair executable has been Installed
- Type the command for uninstallation:
- C:\Program Files\DellNDell Pair\Uninstall.exe
- If uninstallation is required to run silently type the command:
- C:\Program Files\DellNDell Pair\Uninstall.exe/S
User interface
When a device (Mouse, Keyboard etc.) that supports Dell Pair is turned on and brought near the Bluetooth detection range of PC, Dell Pair pops up a notification. It prompts user to connect the device with PC. On clicking ‘Pair, the device is seamlessly paired with PC using Bluetooth.
- Dell Pair Settings
- Start Pairing using Bluetooth
General Features
You can click Start Menu > Dell> Dell Pair to open the user interface to change Dell Pair setting. You can enable or disable Dell Pair feature from the user interface by sliding the switch to “ON” or “OFF” position.
- Dell Pair ON/OFF Switch
- Learn More
- Software version information
Discover: The Dell Peripheral Manager application helps you personalize various Dell Peripherals connected to your computer. To know more about this software, the models that it supports and to download it, please visit www.dell.com/support/dpem
Troubleshoot
If Dell Pair notification does not pop up when a device is turned on for the first time, then please check for the possible causes as mentioned below:
|
Dell Pair notification does not open when a Bluetooth device is turned on for the first time |
· Windows 10 (version 19041) is the oldest version to support Dell Pair
· Bluetooth version 5.0 or higher is present · Bluetooth is supported on the computer. It is turned ON under Windows settings · The Bluetooth device supports detection by Dell Pair · The Bluetooth device is placed close to the detection range of the computer. If peripheral being connected is mouse/keyboard, lift thedevice and bring this closer to PC. · Check the computer and the Bluetooth device both have sufficient battery charge to operate · The Bluetooth device has the latest firmware · The Bluetooth controller on the computer is from Intel · Power cycle the Bluetooth device |
|
Dell Pair reports a pairing error |
Proceed to reconnect via Dell Pair with following steps: |
| 1. If Bluetooth device is
a. brought near PC and b. is in pairing mode c. the Dell Pair UI aids pairing. 2. Wait for pairing error window to auto-dismiss 3. Move the Bluetooth device far away from the computer 4. Bring the Bluetooth device closer to the computer slowly 5. Ensure that the Bluetooth device is in pairing mode and the pairing LED starts blinking |
Documents / Resources
 |
DELL WR110 Universal Pairing Receiver [pdf] User Guide WR110, Universal Pairing Receiver, WR110 Universal Pairing Receiver, Pairing Receiver, Receiver |
Support for Dell Pair | Drivers & Downloads | Dell US 
