BLUEWEAR 016745 Cutting Safety Gloves
Item no. 016745
Jula AB
www.jula.com
Box 363, SE-532 24 Skara
Made in China
Notified body/Jednostka notyfikowana No. 0075
CTC, Pare Sc. T. Garn. – 4, rue Herm. Frenkel,
69367 Lyon Cedex 07 France.
 |
These gloves bears CE marking to demonstrate compliance with Regulation(EU) 2016/425 Personal Protective Equipment and meet the standards EN ISO 21420:2020, EN 388:2016+A1. |
EU DECLARATION OF CONFORMITY
Item number 016743,016744,016745,016746
Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer.
ANTI CUT GLOVE LEV C
Size 8, 9, 10, 11
Conforms to the following directives, regulations and standards:
|
Directive/Regulation |
Harmonised standard |
|
PPE (EU) 2016/425 |
EN ISO 21420:2020, EN 388:2016+A1 |
| The PPE is identical to the PPE which is subject of EU type examination certificate No: |
0075/2169/162/10/21/1809 |
| Name and address of the notified body involved: | CTC Pare Sc. T. Garn. – 4, rue Herm. Frenkel, 69367 Lyon Cedex 07, France NB No: 0075 |
This product was CE marked in year:
WARNING
WARNING! Gloves shall not be worn when there is a risk of entanglement by moving parts of machine.
The durability of the gloves depends on how they are used.
Always check that the gloves are in good condition before using them. Keep the gloves in a clean, dry and ventilated place, free from moisture, dirt, mould and sunlight. Do not leave the gloves in contaminated condition if they are going to be reused. Remove as much as possible of any contamination from the gloves after using them. Dispose of in accordance with current legislation. The materials used are not known to cause allergies. If any reaction occurs discontinue use.
388: 2016+A1 Cat II
Product not assessed for this property.Z
- Product not assessed for this property.
Documents / Resources
 |
BLUEWEAR 016745 Cutting Safety Gloves [pdf] Instruction Manual 016745, Cutting Safety Gloves, 016745 Cutting Safety Gloves |
