True Wireless Earbuds
Initial pairing
Step 1: Open the charging case of your earbuds, and the earbud’s white light will begin to blink. The blue light will show once the earbuds are ready to pair.
Step 2: On your mobile device, turn ON the Bluetooth to begin searching for nearby devices.
NOTE: The steps in enabling your Bluetooth may vary depending on your device’s operating system.
Step 3: When your earbuds are detected, they will show as SOUND FORM Freedom as a device to pair. Tap on the name to complete the pairing.
Manual pairing
Remove the earbuds from the case. Then, press and hold the touch-sensitive buttons on the earbuds for 3 seconds. The status light on the earbuds will blink white and blue when they are ready to be paired.
All-Day Comfort
Our True Wireless Earbuds come in three sizes (S/M/L) of silicone ear tips, providing all-day comfort and noise isolation with its sealed in-ear fit.
How to use the touch controls on the Belkin AUC002
| Audio Playback | ||
| Control | Left Earbud | Right Earbud |
| Volume up ( + ) | Tap one time | |
| Volume down ( -) | Tap one time | |
| Pause / Resume playback | Tap two times | Tap two times |
| Next track | Tap three times | |
| Previous track | Tap three times | |
| Call Handling | ||
| Control | Left Earbud | Right Earbud |
| Accept / End call | Tap two times | Tap two times |
| Reject call | Hold for 2 seconds | Hold for 2 seconds |
| Virtual Assistants | ||
| Control | Left Earbud | Right Earbud |
| Activate virtual assistant | Hold for 2 seconds | Hold for 2 seconds |
How to charge the case and the earbuds
Case: The Belkin AUC002 case can be charged wirelessly using a standard Qi wireless charging pad, or via the USB-C port on the back of the case.
Earbuds: The Belkin AUC002 earbuds can be charged by placing them in the charging case. They can either charge directly from the battery in the case or can be charged while also charging the case.
How to perform a factory restore
To restore the Belkin AUC002 earbuds, place them into the charging case and close the lid.
Step 1: Press and hold the Reset button on the case for 10 seconds.
Step 2: The status light will begin to blink blue/white to signify it’s restoring your case and earbuds to factory defaults.
Step 3: When the charging case status light tops blinking, open the case. The earbuds will slowly blink blue to show they are ready to pair.
Restore the case only
If you want to restore only the case, you can follow the same steps above without the earbuds in the case.
How to use Find My to locate your Belkin AUC002 charging case
Apple Find I provides an easy, secure way to locate SOUND FORM Freedom on a map using the Find My app on your iPhone, iPad, iPod touch, or Mac.
The Belkin SOUNDFORM™ Freedom True Wireless Earbuds, AUC002 features Apple Find My™ functionality built into the charging case. If you ever misplace your case, you can use your iOS or macOS® device and the Apple Find My to locate your earbuds’ case.
IMPORTANT: The Find My feature only works with iOS and macOS devices.
This functionality is built into the charging case only.
Step 1: Open the Apple Find My and tap on Items to view your list of Find My Items.
Tap on your headphones from the list.
Step 2: A map will show the last known location of your headphones.
There are two options available to help you locate your headphones:
Play Sound: This will play a high-pitched tone from the charging case to help you locate the case if it is near you. The sound plays for 10 seconds each time it is pressed.
Directions: This will provide directions from your current location to the last known location of your charging case.
For more information
belkin.com/soundform-freedom
https://qrco.de/soundform-freedom
Documents / Resources
 |
belkin AUC002glWH SOUNDFORM Freedom True Wireless Earbuds [pdf] User Guide AUC002glWH, SOUNDFORM Freedom, True Wireless Earbuds, AUC002glWH SOUNDFORM Freedom True Wireless Earbuds, SOUNDFORM Freedom True Wireless Earbuds, Earbuds |
Belkin Official Support - Belkin AUC002 User Guide 
