Cisco C897VAW-E-K9, Cisco 897 VDSL2/ADSL2+ over POTs, 1GE/SFP, 802.11n ETSI Comp
Cisco C897VAW-E-K9, Cisco 897 VDSL2/ADSL2+ over POTs, 1GE/SFP, 802.11n ETSI Comp
Cisco C897VAW-E-K9, Cisco 897 VDSL2/ADSL2+ over POTs, 1GE/SFP, 802.11n ETSI Comp - Linkom-PC
Cisco C897VAW-E-K9, Cisco 897 VDSL2/ADSL2+ over POTs, 1GE/SFP, 802.11n ETSI Comp - Linkom-PC

Cisco C897VAW-E-K9, Cisco 897 VDSL2/ADSL2+ over POTs, 1GE/SFP, 802.11n ETSI Comp

€260,00

Cisco 897 VDSL2/ADSL2+ over POTs, 1GE/SFP, 802.11n ETSI Comp

Available on backorder

SKU: C897VAW-E-K9 Categories: , , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Cisco C897VAW-E-K9, Cisco 897 VDSL2/ADSL2+ over POTs, 1GE/SFP, 802.11n ETSI Comp.

Linkom-PC is your source for Refurbished Cisco C897VAW-E-K9. Most Cisco C897VAW-E-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco C897VAW-E-K9 Technical Specifications

Aerial
Aerial:External detachable
Antenna Qty:3
Directivity:Omni-directional
Communications
Digital Signaling Protocol:VDSL, ADSL2+
Protocols & Specifications:ITU G.991.2 (G.shdsl), ITU G.992.1 (G.DMT) Annex A
Type:DSL modem
Dimensions & Weight
Depth:24.8 cm
Height:4.45 cm
Width:32.3 cm
Environmental Parameters
Humidity Range Operating:10 – 85% (non-condensing)
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:LAN: 8 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x VDSL2 / ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x SFP (mini-GBIC)
General
Authentication Method:RADIUS, TACACS+, Extensible Authentication Protocol (EAP), EAP-FAST
Compliant Standards:IEEE 802.1D, IEEE 802.11b, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11n (draft 2.0), CISPR 24, EN 61000-3-2, EN55022, EN 61000-3-3, EN55024, CISPR 22, EN50082-1, EN 61000-6-1, AES, FCC CFR47 Part 15, VCCI V-3, ICES-003 issue 4 Class B, ICES-003 issue 4 Class A
Connectivity Technology:Wireless, wired
Data Link Protocol:Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type:Wireless router – 8-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:LEAP, Triple DES, MD5, AES, TLS, PEAP, TTLS, TKIP, WPA, WPA2, PKI, 128-bit AES, 192-bit AES, 256-bit AES, WEP
Features:Firewall protection, auto-sensing per device, DHCP support, NAT support, MDI/MDI-X switch, VLAN support, auto-uplink (auto MDI/MDI-X), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Virtual Route Redundancy Protocol (VRRP) support, Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, CleanAir technology, Bidirectional Forwarding Detection (BFD), DHCP relay, 2T3R MIMO technology, DHCP client, Hot Standby Router Protocol (HSRP) support, Ingress Layer 2 MAC Access Control Lists (ACLs), Call Admission Control (CAC), Flexible NetFlow (FNF)
Flash Memory:256 MB (installed) / 256 MB (max)
Frequency Band:2.4 GHz / 5 GHz
Network / Transport Protocol:L2TP, RSVP, IPSec, FTP, DHCP, DNS, L2TPv3
RAM:512 MB (installed) / 1 GB (max)
Remote Management Protocol:Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI
Routing Protocol:OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE, policy-based routing (PBR), WCCP, Bidirectional Forwarding Detection (BFD)
Status Indicators:Port status, power
Line Properties
Framing Format:ANSI T1.413
Power
Power Device:External power adapter – 60 Watt
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided:Cisco IOS Advanced IP services

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.

Related products

  • Cisco WS-C4500X-16SFP+, Catalyst 4500-X 16 Port 10G IP Base, Front-to-Back, No P/S
    Add to cart

    Cisco WS-C4500X-16SFP+, Catalyst 4500-X 16 Port 10G IP Base, Front-to-Back, No P/S

    €535,00
  • Cisco SPA-1X10GE-L-V2, Cisco 1-Port 10GE LAN-PHY Shared Port Adapter
    Add to cart

    Cisco SPA-1X10GE-L-V2, Cisco 1-Port 10GE LAN-PHY Shared Port Adapter

    €370,00
  • Cisco WS-C4500X-32SFP+, Catalyst 4500-X 32 Port 10G IP Base, Front-to-Back, ( Dual AC -R, 4x FAN)
    Add to cart

    Cisco WS-C4500X-32SFP+, Catalyst 4500-X 32 Port 10G IP Base, Front-to-Back, ( Dual AC -R, 4x FAN)

    €580,00
  • Cisco WS-C2960X-48LPS-L, Catalyst 2960-X 48 GigE PoE 370W, 4 x 1G SFP, LAN Base
    Add to cart

    Cisco WS-C2960X-48LPS-L, Catalyst 2960-X 48 GigE PoE 370W, 4 x 1G SFP, LAN Base

    €210,00