clamps & accesories by steve hirzel

Page 164 (Rev. 9-05)

! W E N

BAR-LOK™ QUICK-ACTING C CLAMPS CLAMPING BAR AND COLLAR: 12L14 STEEL, CARBURIZED-HARDENED, COPPER COATED. SLIDING HANDLE AND SWIVEL FOOT: 12L14 STEEL, COPPER COATED. FRAME: NODULAR IRON. This heavy-duty C clamp features our patented Bar-Lok quick-acting screw mechanism (see page 63). This unique grooved-bar design works smoothly and positively — just slide the bar forward to contact the workpiece, then turn clockwise to apply force. To unclamp, turn counterclockwise and slide the bar back. The long sliding handle provides excellent leverage. All moving components are copper-coated to protect from spatter in welding applications. As strong as a standard C clamp, but much faster. Available in three frame sizes. Standard-throat version provides up to 2400 lbs clamping force. Deepthroat version provides up to 1500 lbs clamping force. Optional rubber pads (for the swivel foot and frame) are available separately, to avoid marring sensitive surfaces. Patent no. 6,726,193.

E B J MAX

A K MF 09/15/05

F L

G THREAD

Standard Throat

D B J MAX

A K

M G THREAD

Bar-Lok C Clamps are ideal for applications that require quickly extending and retracting the clamping screw its full length.

Deep Throat

STANDARD THROAT PART NO. CL-4-BLC CL-6-BLC CL-8-BLC

OPENING 4" 6" 8"

A 4.80 6.75 8.86

B 2.17 2.54 2.72

C 8.27 10.71 13.31

D 1.26

E 1.46 1.65 1.81

F 2.52 2.76 4.02

G 7/8-9

J 4 6 8

K 8.5 10.5 12.5

4 6 8

8.5 10.5 12.5

OPTIONAL SET OF RUBBER PADS

4.25

.50

CL-1-BLCP

4.25

.50

CL-1-BLCP

DEEP THROAT CL-40-BLC CL-60-BLC CL-80-BLC

4" 6" 8"

4.80 6.75 8.86

2.17 2.54 2.72

8.27 10.71 13.31

1.26

1.46 1.65 1.81

4.49 4.72 5.98

7/8-9

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 165 (Rev. 7-03)

DURACLAMP PLASTIC C CLAMPS FIBERGLASS-REINFORCED THERMOPLASTIC

High-strength fiberglass-reinforced plastic C clamps, ideal for finishing operations and other corrosive environments. Also ideal wherever a lightweight C clamp is required. Chemically inert and electrically non-conductive. Highly resistant to virtually all acid and alkali solutions, and boiling water (212° F maximum recommended continuous operating temperature, 290° F for intermittent operation). No stripping required after use. Large, comfortable thumbscrew for easy hand tightening. Available in four sizes. Also available with alumina oxide (Al2O3) tips. Well suited for two-step anodizing processes. Dual tips allow rack mounting two parts back-to-back during finishing. These super-hard tips (1/16" radius) reduce contact area to a small point to minimize rack marks, yet still hold parts securely.

Swivel Pad

PART NO. WITH SWIVEL PAD CL-318-DCS CL-476-DCS CL-635-DCS CL-1016-DCS

Radius Screw

Alumina Oxide Tips

PART NO. MAXIMUM PART NO. WITH TORQUE WEIGHT WITH ALUMINA RADIUS SCREW H K (IN-LBS) (LBS) J OXIDE TIPS A B C D E F G CL-318-DC 3 125 CL-318-DC2T 1-3/16 3/4 2-3/4 13/16 29/32 25/32 9/16-12 2-13/16 3/4 .13 CL-476-DC 4 160 CL-476-DC2T 1-13/16 1-1/8 3-15/16 1 1 1-3/16 5/8-12 3-13/16 1-3/8 .24 CL-635-DC 250 — 2-3/8 1-1/4 4-27/32 1-1/16 1-1/4 1-1/2 11/16-11 4-3/4 1-7/8 4-3/4 .35 CL-1016-DC 350 — 3-7/8 1-3/8 6-13/16 1-1/4 1-1/2 1-3/4 13/16-10 6-1/4 3-3/8 6-1/4 .71

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 166 (Rev. 7-04)

SWING C CLAMPS FRAME & MOUNTING PAD: MILD STEEL, ZINC PLATED CLEAR CHROMATE KNOB: 319 ALUMINUM ALLOY SCREW: 12L14 STEEL, NICKEL PLATED FOOT: 12L14 STEEL, ZINC PLATED YELLOW CHROMATE

! W E N

These unique C clamps have a hinged pad for fastening permantently to a fixture, allowing them to swing clear for workpiece loading. The hinged mounting pad bolts to the fixture with two sockethead cap screws. Four-prong knob provides a firm grip for applications requiring quick tightening and high torque. Clamping screw is cast securely in the knob and has a removable swivel foot. Available in four sizes.

SCREW THREAD

D H MAX

A 2 2-1/2 2-1/2 3-1/2

A B

Swing C Clamps use our patented left-hand-thread swivel-foot system. The ball end of the body screws into the foot for easy installation and removal. Once the ball threads pass beyond the foot threads, the foot can rotate and pivot freely (20° total angle). Foot threads are left-hand to positively prevent accidental black out during use. For other foot types, including Delrin® feet, see Feet for Swivel Screws (order separately).

SCREW THREAD PART NO. CL-520-SCC 5/16-18 CL-525-SCC CL-625-SCC 3/8-16 CL-635-SCC

M COUNTERBORED FOR #10 OR M5 SOCKET-HEAD CAP SCREW

N G P

3/4

1/2

2-1/4

1-3/4

7/8

1-1/2

5/8

1-3/4

2-13/16 2-1/8 3-9/16

H K L 1-15/32 5/16 3-1/4 1-31/32 1-15/16 4-1/16 5/16 2-15/16 4-13/16

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

1/2

5/8 1-1/4 2-1/4

Page 167 (Rev. 7-03)

HANDSCREW CLAMPS HARD MAPLE CLAMPING JAWS, OIL FINISH STEEL SPINDLES AND BEARING NUTS, ZINC PLATED CLEAR CHROMATE HARDWOOD HANDLES, WITH STEEL FERRULES, ZINC PLATED CLEAR CHROMATE P

! NEW

Q M SLOTS

N K DIA

J DIA HOLES FOR BEARING NUTS

D DOUBLE LEAD ACME THREAD

C REACH

B MAXIMUM OPENING

F These classic Handscrew Clamps are still made the old-fashioned way, still made in the USA. Clamping jaws are made from the finest grade of hard maple. True acme threads provide high strength, low thread friction, and excellent wearability. These threads have a double lead, allowing them to advance twice as fast as regular threads, for quick clamping. Choice of five sizes, from tiny 4"-long jaws to massive 12"-long jaws.

G A JAW LENGTH

Step 1

Step 2

Step 3

Handscrew Clamps adjust very quickly. Starting with the jaws parallel, grasp the two handles and rotate the clamp (much like pedalling a bicycle) until the jaws are open just barely wide enough for the thickness to be clamped.

Leaving the center spindle stationary, turn the rear spindle counterclockwise to open the clamping jaws slightly wider in front. Slide clamp over the surface to be gripped.

Again leaving the center spindle stationary, turn the rear spindle clockwise to tighten. The clamping jaws should now be parallel.

PART NO. SINGLE CLAMP CL-4-HSC CL-6-HSC CL-8-HSC CL-10-HSC CL-12-HSC

D PART NO. ACME K SET OF 6 J A B C THREAD E G H CLAMPS F DIA DIA M L N 4 2-1/4 2 1/4 1-1/16 1/2 3-1/8 3/8 25/64 7/8 CL-4-HSC-SETOF6 9/32 9/16 2-1/2 6 3 3 5/16 1-3/8 1/2 4-5/16 7/16 33/64 1 CL-6-HSC-SETOF6 11/32 3/4 3 8 5 4 1-3/4 1/2 5-7/8 CL-8-HSC-SETOF6 1 9/16 7 5 7/16 1-7/8 9/16 7-3/4 CL-10-HSC-SETOF6 10 41/64 1-1/4 3-11/16 15/32 1-1/4 5/8 2-1/8 5/8 9 CL-12-HSC-SETOF6 12 9-1/4 6 1-7/16

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

P 1-7/8 2-27/32 3-23/32 4-23/32 5-25/32

Q 1-1/16 1-1/4 1-1/2 1-5/8 1-7/8

Page 168 (Rev. 7-03)

CAM BAR CLAMPS HARD MAPLE CLAMPING JAWS AND CAM, LACQUER FINISH CORK FACE ON CLAMPING JAWS SPRING STEEL BAR, ZINC PLATED CLEAR CHROMATE

! NEW

These classic bar clamps slide quickly into position, then apply clamping force using a cam. Made in the USA with high-quality materials and workmanship. Clamping jaws are made from the finest grade of hard maple. The rugged spring steel bar has serrations on both sides, to engage steel roll pins in the sliding jaw. Clever bar design keeps the sliding jaw in position by its own weight, so that the clamp can be drawn up and tightened with one hand. Cork padding on the clamping jaws avoids damaging your work and helps prevent the clamp from slipping. Available with 4-1/2" and 6" jaw reach, with clamp openings up to 24".

3/16 15/16 A JAW LENGTH

3/32" CORK FACE BOTH JAWS

3/16

B MAXIMUM CLAMP OPENING

C REACH G 1-1/4

D 3/16

3/4

SERRATIONS ON BOTH SIDES

6" Jaw (4-1/2"Reach) 8" Opening

6" Jaw (4-1/2"Reach) 16" Opening

6" Jaw (4-1/2"Reach) 24" Opening

PART NO. SINGLE CLAMP CL-48-CBC CL-416-CBC CL-424-CBC CL-68-CBC

7-1/2" Jaw (6" Reach) 8" Opening

PART NO. SET OF 6 A CLAMPS CL-48-CBC-SETOF6 6 CL-416-CBC-SETOF6 CL-424-CBC-SETOF6 7-1/2 CL-68-CBC-SETOF6

B 8 16 24 8

C REACH 4-1/2 6

D 12 20 28 12

1-1/2 1-3/8 2-1/4 1-1/2 1-3/8

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

MAXIMUM CAM RISE 1/4

Page 169 (Rev. 7-03)

CARR LANE SIMPLEX HAMMERS

! W E N

SEE COMPONENT PAGES FOR MATERIAL SPECIFICATIONS

Wooden Handle

Design your own custom hammers. These softface mallets can be customized for specific applications by selecting the proper hammer inserts. Choose the same type of insert for both sides, or build a multi-purpose hammer with a different type of insert for each face. The Simplex system uses a patented hammer housing with 3-point clamping that ensures a safe hammer assembly.

Fiberglass Handle

Available in four sizes, with a choice of eight different insert materials: Type A Blue Thermoplastic (Soft) Type B Gray Thermoplastic (Medium Soft) Type C Black Rubber (Medium Soft) Type D White Superplastic (Medium Hard) Type E Red Plastic (Hard) Type F White Nylon (Hard) Type G Soft Metal (Hard) Type H Copper (Hard) Fiberglass Handle Only

),1)

To order a 30mm hammer with a wooden handle, one black rubber insert (C) and one white nylon insert (F) specify: CL-30-SPH-W-CF

* SIMPLEX HAMMER ASSEMBLY — WOODEN HANDLE PART NO. CL-30-SPH-W-xx CL-40-SPH-W-xx CL-50-SPH-W-xx CL-60-SPH-W-xx

A DIA 30mm (1.18) 40mm (1.57) 50mm (1.96) 60mm (2.36)

B 11.81 12.99 13.78 15.95

C 3.54 4.33 5.32 5.71

WEIGHT (LBS) 0.7-0.9 1.3-1.6 2.4-3.0 3.1-4.3

SIMPLEX HAMMER ASSEMBLY — FIBERGLASS HANDLE CL-30-SPH-F-xx CL-40-SPH-F-xx CL-50-SPH-F-xx CL-60-SPH-F-xx

30mm (1.18) 40mm (1.57) 50mm (1.96) 60mm (2.36)

11.81 12.99 13.78 15.95

3.54 4.33 5.32 5.71

0.9-1.5 1.8-3.1 3.3-4.0 3.5-5.5

Observe all appropriate safety precautions. Always wear safety goggles when using a hammer or any striking tool. Bystanders must also wear safety goggles. Never strike the hammer with or against another striking tool, hardened nail, or any other hard object that could cause damage. Chipping could occur, resulting in possible eye or other injury. Discard any chipped or damaged hammer. If assembling the hammer yourself, ensure that all parts are properly fitted into the handle housing and that the screw is tightened to the specified torque. Check hammer before each use. Using a hammer with loose or improperly fitted parts could result in serious injury. Use only genuine Simplex replacement components.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 170 (Rev. 7-03)

CARR LANE SIMPLEX HAMMERS HOUSINGS: CAST IRON, FURNISHED WITH SOCKET-HEAD CAP SCREW, SPRING WASHER, AND NUT HANDLES: EUROPEAN BLACK LOCUST WOOD, OR FIBERGLASS WITH ERGONOMIC RUBBER GRIP

HOUSING & HANDLE — WOODEN HANDLE Rugged cast iron housing (red), furnished with a high-strength socket-head cap screw, spring washer, and nut. Premium quality hardwood handle. Use wooden handles only with red housings.

HOUSING PART NO. CL-30-SPH-HWH CL-40-SPH-HWH CL-50-SPH-HWH CL-60-SPH-HWH

HANDLE PART NO. CL-30-SPH-WH CL-40-SPH-WH CL-50-SPH-WH CL-60-SPH-WH

TIGHTENING HAMMER TORQUE (FT-LBS) SIZE (FACE DIA) PLASTIC INSERTS METAL INSERTS 11 15 30mm (1.18) 18 30 40mm (1.57) 22 37 50mm (1.96) 30 48 60mm (2.36)

HOUSING & HANDLE — FIBERGLASS HANDLE Heavy-duty cast iron housing (black), reinforced for use with a fiberglass handle, furnished with a high-strength socket-head cap screw, spring washer, and nut. Highstrength fiberglass handle with an ergonomic rubber grip. Use fiberglass handles only with black housings.

Insert

HOUSING PART NO. CL-30-SPH-HFH CL-40-SPH-HFH CL-50-SPH-HFH CL-60-SPH-HFH

Housing

HANDLE PART NO. CL-30-SPH-FH CL-40-SPH-FH CL-50-SPH-FH CL-60-SPH-FH

Handle

TIGHTENING HAMMER TORQUE (FT-LBS) SIZE (FACE DIA) PLASTIC INSERTS METAL INSERTS 18 30 30mm (1.18) 22 44 40mm (1.57) 30 52 50mm (1.96) 44 59 60mm (2.36)

Hammer Assembly

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 171 (Rev. 7-03)

CARR LANE SIMPLEX HAMMERS Blue thermoplastic inserts are soft and nonsmudging. Applications include assembly operations, dent removal, woodworking, furniture assembly, window and door construction, joiner’s work, and floor tiling. Hardness 60-70 Shore A.

Type A Inserts Blue Thermoplastic (Soft)

PART NO. CL-30-SPH-A CL-40-SPH-A CL-50-SPH-A CL-60-SPH-A

HAMMER SIZE (FACE DIA) 30mm (1.18) 40mm (1.57) 50mm (1.96) 60mm (2.36)

Type B Inserts Grey Thermoplastic (Medium Soft)

White superplastic inserts (UHMW polyethylene) are medium hard, durable, impact resistant, acid and lye resistant, grease and oil resistant, and ideal for striking sharp edges. Applications include assembly operations, automotive assembly and repair work, repair and maintenance work, car body work, sheet metal working, dent removal, assembly of sharp-edged workpieces, paving, masonry work, scaffold construction, gardening, and landscaping. Hardness 60-70 Shore D.

Black Rubber inserts are medium soft. Applications include assembly operations, dent removal, prefabricated housing construction, carpenter’s work, paving, masonry work, concrete-form setup, scaffold construction, gardening, landscaping, and interior construction. Hardness 90-100 Shore A.

Type C Inserts Black Rubber (Medium Soft)

PART NO. CL-30-SPH-C CL-40-SPH-C CL-50-SPH-C CL-60-SPH-C

HAMMER SIZE (FACE DIA) 30mm (1.18) 40mm (1.57) 50mm (1.96) 60mm (2.36)

Type D Inserts White Superplastic (Medium Hard)

Type E Inserts Red Plastic (Hard)

Type G Inserts Soft Metal (Hard)

PART NO. CL-30-SPH-E CL-40-SPH-E CL-50-SPH-E CL-60-SPH-E

Soft metal inserts are made of an aluminumcopper alloy which is hard and resistant to heat. Excellent alternative to old-fashioned lead hammers, to eliminate the risk of lead contamination. Applications include metalworking, tooling, automotive assembly and repair work, straightening work, car body work, and mold construction. HAMMER SIZE PART NO. (FACE DIA) CL-30-SPH-G 30mm (1.18) CL-40-SPH-G 40mm (1.57) CL-50-SPH-G 50mm (1.96) CL-60-SPH-G 60mm (2.36)

PART NO. CL-30-SPH-D CL-40-SPH-D CL-50-SPH-D CL-60-SPH-D

HAMMER SIZE (FACE DIA) 30mm (1.18) 40mm (1.57) 50mm (1.96) 60mm (2.36)

White nylon inserts are hard, grease and oil resistant, highly elastic, and have superior strike effectiveness. Applications include assembly operations, metalworking, tooling, automotive assembly and repair work, joining of workpieces, sheet metal working, dent removal, mold construction, assembly of sharp-edged workpieces, and scaffold construction. Hardness 68-78 Shore D.

Red plastic inserts (cellulose acetate) are hard, semi-transparent, and grease & oil resistant. Applications include automotive assembly and repair work, sheet metal working, dent removal, concrete-form setup, and scaffold construction. Hardness 65-75 Shore D. HAMMER SIZE (FACE DIA) 30mm (1.18) 40mm (1.57) 50mm (1.96) 60mm (2.36)

Gray thermoplastic inserts are medium soft and non-smudging. Applications include assembly operations, car-body work, woodworking, furniture assembly, window and door construction, joiner’s work, floor tiling, paving, and interior construction. Hardness 8595 Shore A. HAMMER SIZE PART NO. (FACE DIA) CL-30-SPH-B 30mm (1.18) CL-40-SPH-B 40mm (1.57) CL-50-SPH-B 50mm (1.96) CL-60-SPH-B 60mm (2.36)

Type F Inserts White Nylon (Hard)

PART NO. CL-30-SPH-F CL-40-SPH-F CL-50-SPH-F CL-60-SPH-F

HAMMER SIZE (FACE DIA) 30mm (1.18) 40mm (1.57) 50mm (1.96) 60mm (2.36)

Copper inserts are hard and provide maximum impact. Plastic socket provides for secure mounting of the copper insert in the hammer. Applications include machine construction, automotive assembly and repair work, repair and maintenance work, and vehicle service stations.

Type H Inserts Copper (Hard)

PART NO. CL-30-SPH-H CL-40-SPH-H

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

HAMMER SIZE (FACE DIA) 30mm (1.18) 40mm (1.57)

Page 172 (Rev. 7-03)

NO-REBOUND HAMMERS

! W E N

HOUSINGS: STEEL ASSEMBLY CONTAINING STEEL PELLETS. HANDLE: HICKORY WOOD. INSERTS: NYLON, NATURAL WHITE COLOR, HARDNESS 68-78 SHORE D No-Rebound Hammers deliver full impact, about 50% greater than a standard hammer. The housing is filled with special steel pellets that transfer momentum to the impact point. Ideal for assembling machine parts without damage. Speeds up work while reducing fatigue. Allows better hammer control by absorbing the bounce. Hickory-wood handle. Available in five standard sizes, plus two sledgehammer sizes. Supercraft No-Rebound Hammers have replaceable nylon inserts. These nylon inserts are hard, grease and oil resistant, highly elastic, and have superior strike effectiveness. Applications include assembly operations, metalworking, tooling, positioning of workpieces, automotive assembly and repair work, joining of workpieces, sheet metal working, dent removal, mold construction, assembly of sharp-edged workpieces, and scaffold construction.

Supercraft Hammers (Wooden Handle)

No-Rebound Hammers are filled with special steel pellets that transfer momentum to the impact point.

Observe all appropriate safety precautions. Never allow the hammer’s striking faces to wear down to the point where the hammer housing makes contact with the work surface, as irreparable damage could result. Always wear safety goggles when using a hammer or any striking tool. Bystanders must also wear safety goggles. Never strike the hammer with or against another striking tool, hardened nail, or any other hard object that could cause damage. Chipping could occur, resulting in possible eye or other injury. Discard any chipped or damaged hammer.

SUPERCRAFT HAMMERS — WOODEN HANDLE PART NO. CL-3366-020-NRH CL-3366-030-NRH CL-3366-040-NRH CL-3366-050-NRH CL-3366-060-NRH

FACE DIA 20mm (.78) 30mm (1.18) 40mm (1.57) 50mm (1.96) 60mm (2.36)

WEIGHT (LBS) 0.5 0.7 1.6 2.2 3.8

REPLACEMENT OVERALL HEAD INSERT LENGTH LENGTH (2 REQUIRED) 11.77 4.12 CL-3508-020-NRHI 12.95 4.32 CL-3508-030-NRHI 14.13 4.51 CL-3508-040-NRHI 14.52 4.71 CL-3508-050-NRHI 14.52 5.69 CL-3508-060-NRHI

SUPERCRAFT SLEDGEHAMMERS — WOODEN HANDLE Supercraft Sledgehammers (Wooden Handle)

PART NO. CL-3366-081-NRH CL-3366-107-NRH

FACE DIA 80mm (3.14) 100mm (3.93)

WEIGHT (LBS) 9 15

REPLACEMENT INSERT OVERALL HEAD (2 REQUIRED) LENGTH LENGTH CL-3508-080-NRHI 34.5 7.85 CL-3508-100-NRHI 39.2 8.24

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 173 (Rev. 12-03)

! W E N

NO-REBOUND HAMMERS HOUSING & HANDLE: STEEL ASSEMBLY CONTAINING STEEL PELLETS SUPERCRAFT INSERTS: NYLON, NATURAL WHITE COLOR, HARDNESS 68-78 SHORE D SECURAL INSERTS: POLYURETHANE, YELLOW

No-Rebound Hammers deliver full impact, about 50% greater than a standard hammer. The housing is filled with special steel pellets that transfer momentum to the impact point. Ideal for assembling machine parts without damage. Speeds up work while reducing fatigue. Allows better hammer control by absorbing the bounce. Steel handle with ergonomic rubber grip. Supercraft No-Rebound Hammers are available in four sizes. Supercraft Hammers have replaceable nylon inserts. These nylon inserts are hard, grease and oil resistant, highly elastic, and have superior strike effectiveness.

Supercraft Hammers (Steel Handle)

Secural Narrow No-Rebound Hammers have a narrow, rectangular head that allows hammering in tight spots, and also makes storage easier in toolbox drawers. Available in one size, with a 30mm x 40mm face. Secural Narrow Hammers have replaceable polyurethane inserts. These inserts are medium soft.

Secural Narrow Hammers (Steel Handle)

SUPERCRAFT HAMMERS — STEEL HANDLE PART NO. CL-3377-030-NRH CL-3377-040-NRH CL-3377-050-NRH CL-3377-060-NRH

FACE DIA 30mm (1.18) 40mm (1.57) 50mm (1.96) 60mm (2.36)

WEIGHT (LBS) 1.3 1.9 2.6 3.9

REPLACEMENT OVERALL HEAD INSERT LENGTH LENGTH (2 REQUIRED) 11.38 4.32 CL-3508-030-NRHI 11.77 4.51 CL-3508-040-NRHI 12.17 4.71 CL-3508-050-NRHI 12.76 5.69 CL-3508-060-NRHI

SECURAL NARROW HAMMERS — STEEL HANDLE No-Rebound Hammers are filled with special steel pellets that transfer momentum to the impact point.

PART NO. CL-3380-040-NRH

FACE DIMENSIONS WEIGHT (RECTANGULAR) (LBS) 30mm x 40mm 1.6 (1.18 x 1.57)

OVERALL HEAD LENGTH LENGTH 11.77

4.59

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

REPLACEMENT INSERT (2 REQUIRED) CL-3511-040-NRHI

Page 174 (Rev. 7-03)

NO-REBOUND HAMMERS HOUSING: STEEL ASSEMBLY CONTAINING STEEL PELLETS. INSERTS: WHITE POLYURETHANE. HANDLE: HICKORY WOOD WITH NON-SLIP RUBBER COATING No-Rebound Hammers deliver full impact, about 50% greater than a standard hammer. The housing is filled with special steel pellets that transfer momentum to the impact point. Ideal for assembling machine parts without damage. Speeds up work while reducing fatigue. Allows better hammer control by absorbing the bounce. Hickory-wood handle. Available in four sizes. Tahlen No-Rebound Hammers have replaceable polyurethane inserts. These inserts are hard and highly elastic.

No-Rebound hammers are filled with a special steel grit that transfers momentum to the impact point.

Tahlen Hammers (Wooden Handle)

HANDLE LENGTH REPLACEMENT FACE TO CENTERLINE POLYURETHANE INSERTS PART NO.* WEIGHT DIA OF FACE (2 REQUIRED) CL-100-NBH 6 oz 7/8 CL-100-NBH-NT CL-101-NBH 1 lb 1-1/4 CL-101-NBH-NT 12 CL-102-NBH 2 lb 1-3/4 CL-102-NBH-NT CL-103-NBH 3 lb 2-1/8 CL-103-NBH-NT * For hammers with optional, cheaper Tenite inserts, please contact factory.

NO-MAR HAMMERS ALUMINUM ALLOY WITH STEEL CORE

Economical aluminum alloy hammer. Excellent alternative to old-fashioned lead hammers, to eliminate the risk of lead contamination. Onepiece cast construction with a steel core for extra strength. Applications include metalworking, tooling, automotive assembly and repair work, straightening work, car body work, and mold construction. Available in two sizes.

STEEL CORE

Aluminum Alloy PART NO. CL-1-NMH CL-2-NMH

WEIGHT 2 lb 3.5 lb

FACE DIA 1-1/2 2

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

HANDLE LENGTH TO CENTERLINE OF FACE 10-1/2 11

Page 175 (Rev. 7-03)

NO-REBOUND DROP HAMMERS HOUSING: STEEL ASSEMBLY CONTAINING STEEL PELLETS INSERTS: NYLON, NATURAL WHITE COLOR, HARDNESS 68-78 SHORE D No-Rebound Drop Hammers provide the impact of a normal hammer even when access is restricted. No-Rebound Hammers deliver full impact, about 50% greater than a standard hammer. The housing is filled with special steel pellets that transfer momentum to the impact point. Ideal for assembling machine parts without damage. Speeds up work while reducing fatigue. Allows better hammer control by absorbing the bounce. Available in four sizes .

! W E N

No-Rebound Drop Hammers are filled with special steel pellets that transfer momentum to the impact point.

PART NO. CL-3408-020-NRH CL-3408-030-NRH CL-3408-040-NRH CL-3408-050-NRH

FACE DIA 20mm (.78) 30mm (1.18) 40mm (1.57) 50mm (1.96)

No-Rebound Drop Hammers have replaceable nylon inserts. These nylon inserts are hard, grease and oil resistant, highly elastic, and have superior strike effectiveness. Applications include assembly operations, metalworking, tooling, positioning of workpieces, automotive assembly and repair work, joining of workpieces, sheet metal working, dent removal, mold construction, and assembly of sharp-edged workpieces.

WEIGHT (LBS) 0.5 1.0 1.8 2.8

REPLACEMENT INSERT LENGTH (2 REQUIRED) 5.89 CL-3508-020-NRHI 6.08 CL-3508-030-NRHI 6.28 CL-3508-040-NRHI 6.48 CL-3508-050-NRHI

SOFT-FACE PUNCHES HOUSING: STEEL. INSERTS: NYLON, NATURAL WHITE COLOR, HARDNESS 68-78 SHORE D

Soft-Face Punches safely extend the reach of a hammer when access is restricted. Transfers impact to difficult-to-reach places. Available in two sizes.

! W E N

Soft-Face Punches have replaceable nylon inserts. These nylon inserts are hard, grease and oil resistant, highly elastic, and have superior strike effectiveness. Applications include assembly operations, metalworking, tooling, automotive assembly and repair work, joining of workpieces, sheet metal working, dent removal, and assembly of sharp-edged workpieces.

PART NO. CL-3408-010-SFP CL-3408-015-SFP

FACE DIA 10mm (.39) 15mm (.59)

WEIGHT (LBS) 0.2 0.4

REPLACEMENT INSERT LENGTH (2 REQUIRED) 6.59 CL-3508-010-NRHI 6.87 CL-3508-015-NRHI

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 176 (Rev. 4-01)

ACORN NUTS 12L14 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

USA PART NO. A B CL-0-AN 1/4-20 1/2 CL-1-AN 5/16-18 5/8 CL-5-AN 3/8-16 3/4 CL-2-AN 1/2-13 7/8 CL-3-AN 5/8-11 1-1/16 CL-4-AN 3/4-10 1-1/4

C 3/8 13/32 7/16 9/16 13/16 1

AN P E

D 1/2 5/8 3/4 15/16 1-3/16 1-3/8

0AN

IBP

C A THD.

METRIC

Closed end covers the end of a stud to prevent snags or thread damage.

CLM-6-AN CLM-8-AN CLM-10-AN CLM-12-AN CLM-16-AN CLM-20-AN

M6 M8 M10 M12 M16 M20

10mm 13mm 17mm 19mm 24mm 30mm

IBP

.59

.39

.79 .98 1.18 1.38

.59 .79 .98

KNURLED NUTS 12L14 STEEL, BLACK OXIDE FINISH KN P E

USA PART NO. CL-0-KN CL-1-KN CL-2-KN CL-3-KN

C B DIA DIA

A 1/4-20 3/8-16 1-1/8 1/2-13 5/8-11 1-3/8

0KN

F DIA

A THD.

IBP

IBP 1 7/16 1/16 .257

C DIA

METRIC Heavy lock nut that can be tightened by hand or with an extension rod (1/4" or 6mm diameter). Large contact surface.

M6 CLM-6-KN CLM-10-KN M10 CLM-12-KN M12 CLM-16-KN M16

1.12 .98 .43

.08 .256

1.38

F DIA (4) PLACES NOT THRU

E D

KNURLED CHECK NUTS 12L14 STEEL, BLACK OXIDE FINISH

USA PART NO. CL-1024-TSJN CL-1032-TSJN CL-1420-TSJN CL-51618-TSJN CL-3816-TSJN CL-1213-TSJN CL-5811-TSJN

B C DIA DIA D A E #10-24 1/4 3/16 #10-32 1/4-20 3/4 1/2 5/16-18 5/16 1/4 3/8-16 1/2-13 1 3/4 3/8 1/4 5/8-11

TSJN P E 1024TSJN

IBP

E D

IBP

METRIC

Multipurpose lock nut for finger tightening.

CLM-5-TSJN CLM-6-TSJN CLM-8-TSJN CLM-10-TSJN CLM-12-TSJN CLM-16-TSJN

M5 M6 M8 M10 M12 M16

.24 .20 .75

C DIA

.51 .31 .28

.98

.75 .39 .31

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

A THREAD

B DIA

Page 177 (Rev. 8-98)

HEX NUTS STEEL: MILD STEEL, BLACK OXIDE FINISH STAINLESS STEEL: 300-SERIES, PASSIVATE FINISH

USA STEEL PART NO. CL-4-HN CL-5-HN CL-6-HN CL-8-HN CL-10-HN CL-12-HN CL-16-HN CL-20-HN

STAINLESS STEEL A PART NO. THREAD B C CL-4-HN-S 1/4-20 15/64 1/2 CL-5-HN-S 5/16-18 19/64 9/16 CL-6-HN-S 3/8-16 23/64 11/16 CL-8-HN-S 1/2-13 31/64 7/8 CL-10-HN-S 5/8-11 39/64 1-1/16 CL-12-HN-S 3/4-10 47/64 1-1/4 1-8 63/64 1-5/8 1-1/4-7 1-7/32 2

HN P E

USA FINE

High-quality heavy hex nut, available in steel or stainless steel.

CL-4-FHN CL-5-FHN CL-6-FHN CL-8-FHN CL-10-FHN CL-12-FHN

CL-4-FHN-S CL-5-FHN-S CL-6-FHN-S CL-8-FHN-S

1/4-28 5/16-24 3/8-24 1/2-20 5/8-18 3/4-16

7/32 17/64 21/64 7/16 35/64 41/64

7/16 1/2 9/16 3/4 15/16 1-1/8

.20 .26 .31 .39 .51 .63 .75 .94

10mm 13mm 17mm 19mm 24mm 30mm 36mm 46mm

4HN

METRIC M6 M8 M10 M12 M16 M20 M24 M30

CLM-6-HN CLM-8-HN CLM-10-HN CLM-12-HN CLM-16-HN CLM-20-HN CLM-24-HN CLM-30-HN

IBP

JAM NUTS STEEL: MILD STEEL, BLACK OXIDE FINISH STAINLESS STEEL: 300-SERIES, PASSIVATE FINISH

USA STAINLESS A STEEL STEEL B C PART NO. PART NO. THREAD 1/8 #10-24 3/8 CL-3-JN-S 11/64 1/4-20 1/2 CL-4-JN CL-4-JN-S 5/16-18 13/64 9/16 CL-5-JN CL-5-JN-S 15/64 11/16 3/8-16 CL-6-JN CL-6-JN-S 19/64 1/2-13 7/8 CL-8-JN 23/64 1-1/16 5/8-11 CL-10-JN 27/64 1-1/4 3/4-10 CL-12-JN 35/64 1-5/8 1-8 CL-16-JN

USA FINE High-quality heavy jam nut, available in steel or stainless steel.

CL-4-FJN CL-5-FJN CL-6-FJN

CL-3-FJN-S CL-4-FJN-S CL-5-FJN-S CL-6-FJN-S

#10-32 1/4-28 5/16-24 3/8-24

1/8 5/32 3/16 7/32

JNS P E

3/8 7/16 1/2 9/16

3JNS

METRIC CLM-6-JN CLM-8-JN CLM-10-JN CLM-12-JN CLM-16-JN CLM-20-JN CLM-24-JN

M6 M8 M10 M12 M16 M20 M24

IBP

A .13 .16 .20 .24 .31 .39 .47

10mm 13mm 17mm 19mm 24mm 30mm 36mm

IBP

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 178 (Rev. 4-05)

FLANGE NUTS STEEL: 12L14, CARBURIZED-HARDENED, BLACK OXIDE FINISH STAINLESS STEEL: 300-SERIES, PASSIVATE FINISH

USA

Flanged face provides a large bearing surface to avoid damaging the part underneath, especially when clamping over a slot. Precision machined from one solid piece of steel for extra strength.

STAINLESS STEEL STEEL A PART NO. PART NO. #10-24 CL-123 CL-125 1/4-20 CL-1-FN CL-126 5/16-18 CL-9-FN 3/8-16 CL-2-FN CL-127 1/2-13 CL-3-FN CL-128 5/8-11 CL-4-FN CL-129 3/4-10 CL-5-FN 7/8-9 CL-6-FN 1"-8 CL-7-FN 1-1/4"-7 CL-10-FN

B 5/16 5/16 3/8 1/2 11/16 13/16 1 1-1/8 1-1/4 1-3/8

C D DIA 3/8 1/2 9/16 7/16 1/2 5/8 11/16 9/16 3/4 7/8 11/16 1-1/8 7/8 1-3/8 1-1/16 1-5/8 1-1/4 1-3/4 1-7/16 1-5/8 2 2-1/4 1-13/16

E .08 .12 .09 .12 .12

L ONA I T I ADD ES NOW LE! SIZ AILAB AV

.20 .25 .32 .28 .25 FN P E

USA FINE CL-124 CL-1-FFN CL-9-FFN CL-2-FFN CL-3-FFN CL-4-FFN CL-5-FFN CL-7-FFN

#10-32 5/16 1/2 3/8 1/4-28 1/2 5/8 5/16-24 3/8 3/4 9/16 1/2 3/8-24 7/8 11/16 1/2-20 11/16 1-1/8 7/8 5/8-18 13/16 1-3/8 1-1/16 1 3/4-16 1-5/8 1-1/4 1"-14 1-1/4 1-5/8 2

.08

123 1FN

.12

.25 .25

M6 M8 M10 M12 M16 M20 M24

METRIC CLM-6-FN CLM-8-FN CLM-10-FN CLM-12-FN CLM-16-FN CLM-20-FN CLM-24-FN

IBP

.20

.31 .39 .51 .67 .83 .98 1.26

.63 .75 .87 1.10 1.34 1.61 2.01

10mm 13mm 17mm 19mm 24mm 30mm 36mm

E B

D HEX

.12 .20 .24 .28

COUPLING NUTS 12L14 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

USA

For joining two or more studs together to create an extra-long stud.

CN P E

PART NO. A B CL-0-CN 1/4-20 1/2 CL-00-CN 5/16-18 9/16 CL-1-CN 3/8-16 11/16 CL-2-CN 1/2-13 7/8 CL-3-CN 5/8-11 1-1/16 CL-4-CN 3/4-10 1-1/4 CL-6-CN 1"-8 1-5/8

C 5/8 7/8 1 1-1/4 1-5/8 1-7/8 2-1/2

METRIC CLM-6-CN CLM-8-CN CLM-10-CN CLM-12-CN CLM-16-CN CLM-20-CN

M6 M8 M10 M12 M16 M20

10mm 13mm 17mm 19mm 24mm 30mm

0CN

IBP A THD.

IBP .71 .79 .98 1.18 1.57 1.97

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 179 (Rev. 4-05)

SPHERICAL NUTS AND WASHERS 12L14 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

L ONA I T I ADD ES NOW LE! SIZ AILAB AV USA Combination nut and washer that compensates whenever a stud and clamp strap are not perpendicular. The nut has a convex spherical radius, while the washer has a matching concave spherical radius.

3째 Adjustment Range

Spherical Nut & Washer Combination

PART NO. CL-1-SNW CL-9-SNW CL-2-SNW CL-3-SNW CL-4-SNW CL-5-SNW CL-6-SNW CL-7-SNW

THREAD 1/4-20 5/16-18 3/8-16 1/2-13 5/8-11 3/4-10 7/8-9 1"-8

CLM-6-SNW CLM-8-SNW CLM-10-SNW CLM-12-SNW CLM-16-SNW CLM-20-SNW CLM-24-SNW

M6 M8 M10 M12 M16 M20 M24

HEX 1/2 9/16 11/16 7/8 1-1/16 1-1/4 1-7/16 1-5/8

A DIA 5/8 3/4 7/8 1-1/8 1-3/8 1-5/8 1-3/4 2

B 15/32 17/32 19/32 7/8 1 1-3/16 1-5/16 1-7/16

C DIA 5/16 3/8 7/16 9/16 11/16 7/8 1 1-1/8

R 3/4 1 1-1/4 1-1/2 1-3/4 2-1/4 2-1/2 2-3/4

.47 .55 .67 .87 .98 1.18 1.41

5/16 3/8 7/16 9/16 11/16 7/8 1

3/4 1 1-1/4 1-1/2 1-3/4 2-1/4 2-3/4

SNW P E 1SNW

R (RADIUS)

METRIC 10mm 5/8 13mm 3/4 17mm 7/8 19mm 1-1/8 24mm 1-3/8 30mm 1-5/8 36mm 2

IBP

(ASSEMBLED) B

SPHERICAL WASHERS STEEL: 12L14, CARBURIZED-HARDENED, BLACK OXIDE FINISH STAINLESS STEEL: 300-SERIES

USA & METRIC Two-piece washer that compensates whenever a stud and clamp strap are not perpendicular. The top washer has a convex spherical radius, while the bottom washer has a matching concave spherical radius. 3째 Adjustment Range

Flange Nut Spherical Washer (2 pieces)

STAINLESS STEEL BOLT STEEL PART NO. PART NO. SIZE #10 & M5 CL-144 CL-1-SW 1/4 & M6 CL-145 CL-11-SW 5/16 & M8 CL-146 CL-2-SW 3/8 & M10 CL-147 CL-3-SW 1/2 & M12 CL-148 CL-4-SW 5/8 & M16 CL-149 CL-5-SW 3/4 & M18 CL-150 CLM-20-SW M20 CL-6-SW 7/8 & M22 CL-7-SW 1 & M24 CL-8-SW 1-1/8 CL-9-SW 1-1/4 & M30 CL-10-SW 1-1/2 & M36

A DIA 7/32 9/32 11/32 13/32 17/32 21/32 25/32 .83 15/16 1-1/16 1-3/16 1-5/16 1-9/16

IBP B DIA 1/2 5/8 3/4 13/16 7/8 1 1-1/8 1-3/8 1-5/8 1-3/4 2 2-1/4 2-5/8 2-7/8

D C DIA 1/8 1/4 3/16 5/16 1/4 3/8 7/32 1/4

R 3/4 1

7/16 1-1/4

5/16 9/16 11/16 7/8 3/8 7/8 1 1-1/8 1/2 1-1/4 1-3/8 1-5/8

SW P E

B A

144 1SW

1-1/2 1-3/4

C D

2-1/4 2-1/2 2-3/4 3

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

IBP

Page 180 (Rev. 2-06)

SWING C WASHERS 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

A RADIUS

IBP

Permanently attached C washer that swings out of the way for clear loading. Can be reversed to swing into position either clockwise or counterclockwise. Shoulder Screw furnished. E DIA

USA STUD SIZE A B C 3/8 3/4 3/8 1 1/2 1 1/2 1-1/4 5/8 1-1/8 9/16 1-1/2 3/4 1-1/4 5/8 1-3/4

PART NO. CL-1-SCW CL-2-SCW CL-3-SCW CL-4-SCW

B RADIUS D G DIA

IBP H THD.

D 1/4 3/8 3/8 1/2

SHOULDER E G SCREW H DIA DIA (FURNISHED) 13/32 3/8 5/16-18 CL-24-SS 17/32 CL-2-SS 21/32 1/2 3/8-16 CL-3-SS 13/16 CL-4-SS

METRIC CLM-1-SCW CLM-2-SCW CLM-3-SCW CLM-4-SCW

M10 M12 M16 M20

3/4 3/8 1 1 1/2 1-1/4 1-1/8 9/16 1-1/2 1-1/4 5/8 1-3/4

.236 .375 .375 .472

13/32 10mm M8 17/32 21/32 13mm M10 13/16

CLM-1006-SS CLM-1010-SS CLM-1310-SS CLM-1312-SS

SHOULDER SCREWS ALLOY STEEL, HEAT TREATED RC 32-43, BLACK OXIDE FINISH Precision close-tolerance Shoulder Screw. Shoulder diameter is ground to a closer tolerance than ordinary stripper bolts for better bearing action. Shoulder length is held to a plus tolerance to allow a nominal-size plate to rotate freely underneath the head.

USA SHOULDER DIA

F PART B A NOMINAL ACTUAL E DIA G NO. NOMINAL ACTUAL D CL-5-SS 1/4 .2500 CL-12-SS 3/8 .3750 CL-13-SS 1/2 .5000 1/4 .2500 #10-24 3/16 3/8 3/8 1/8 CL-37-SS 5/8 .6250 CL-15-SS 3/4 .7500 CL-16-SS 1 1.0000 CL-1-SS 1/4 .2500 CL-6-SS 5/16 .3125 CL-11-SS 3/8 .3750 .3125 1/4-20 CL-20-SS 5/16 1/2 .5000 7/32 7/16 7/16 5/32 CL-21-SS 5/8 .6250 CL-7-SS 3/4 .7500 CL-8-SS 1 1.0000 CL-24-SS 1/4 .2500 CL-2-SS 3/8 .3750 CL-14-SS 1/2 .5000 1/4 1/2 9/16 3/16 3/8 .3750 5/16-18 CL-9-SS 5/8 .6250 CL-10-SS 3/4 .7500 CL-47-SS 1 1.0000 CL-3-SS 3/8 .3750 CL-4-SS 1/2 .5000 1/2 .5000 3/8-16 CL-31-SS 5/8 .6250 5/16 5/8 3/4 1/4 CL-32-SS 3/4 .7500 CL-46-SS 1 1.0000 CL-33-SS 1/2 .5000 CL-34-SS 5/8 .6250 3/8 3/4 7/8 5/16 5/8 .6250 1/2-13 CL-35-SS 3/4 .7500 CL-36-SS 1 1.0000 CL-38-SS 1/2 .5000 3/4 .7500 5/8-11 CL-39-SS 3/4 .7500 1/2 7/8 1 3/8 CL-40-SS 1 1.0000

L IONA NOW T I D AD NGTHS LE! LE AILAB AV METRIC SHOULDER DIA PART NO. CLM-806-SS CLM-808-SS CLM-810-SS CLM-812-SS CLM-816-SS CLM-820-SS CLM-1006-SS CLM-1008-SS CLM-1010-SS CLM-1012-SS CLM-1016-SS CLM-1020-SS CLM-1310-SS CLM-1312-SS CLM-1316-SS CLM-1320-SS CLM-1610-SS CLM-1612-SS CLM-1616-SS CLM-1620-SS CLM-2016-SS CLM-2020-SS CLM-2025-SS

NOMINAL ACTUAL

8mm

10mm

13mm

16mm

20mm

B A

NOMINAL ACTUAL D

6mm 8mm .3150 M6 10mm 12mm 16mm 20mm 6mm 8mm .3937 M8 10mm 12mm 16mm 20mm 10mm .5118 M10 12mm 16mm 20mm 10mm .6299 M12 12mm 16mm 20mm 16mm .7874 M16 20mm 25mm

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

.2362 .3150 .3937 .4724 .6299 .7874 .2362 .3150 .3937 .4724 .6299 .7874 .3937 .4724 .6299 .7874 .3937 .4724 .6299 .7874 .6299 .7874 .9843

F E DIA

.22 .44 .51 4mm

.28 .52 .63 5mm

.35 .65 .71 6mm

.43 .72 .94 8mm

.55 .88 1.18 10mm

Page 181 (Rev. 7-05)

C WASHERS STEEL: 12L14, CARBURIZED-HARDENED, BLACK OXIDE FINISH STAINLESS STEEL: 300-SERIES

CW P E

USA & METRIC

1CW 155

Washer that slides in and out of position for clear loading. Can be used with a nut, or by sliding it into a radial groove on a drawbar.

STAINLESS STEEL STEEL BOLT PART NO. PART NO. SIZE CL-1-CW #10 or M5 CL-3-CW CL-155 1/4 or M6 CL-18-CW CL-5-CW 5/16 or M8 CL-157 CL-6-CW 3/8 or M10 CL-7-CW CL-22-CW CL-8-CW 1/2 or M12 CL-24-CW CL-9-CW 5/8 or M16 CL-26-CW CL-11-CW 3/4 or M18 CL-12-CW 1 or M24 CL-15-CW

C A DIA B C 1/2 3/16 13/64 3/4 1/4 17/64 7/8 3/16 9/32 1 1/4 17/64 1 3/16 21/64 1-1/4 5/16 3/8 13/32 1-1/2 3/8 1-3/4 1/4 1-7/8 3/8 17/32 2-1/4 2-1/8 3/8 21/32 2-1/2 7/16 2-1/2 7/16 25/32 2-1/2 7/16 1-1/32 3 1/2 1-1/32

D DIA 11/32 13/32 25/64 13/32 1/2 5/8 23/32

IBP

23/32 A

1/32

29/32

IBP

1-3/32 B

1-9/32 1-21/32 1-21/32

FINE KNURL ON STAINLESS WASHERS

FLAT WASHERS STEEL: 1010, CARBURIZED-HARDENED, BLACK OXIDE FINISH STAINLESS STEEL: 300-SERIES

USA & METRIC

Heavy-duty washer that is finished flat and parallel.

STAINLESS BOLT STEEL STEEL SIZE PART NO. PART NO. #10 or M5 CL-254 CL-255 1/4 or M6 CL-7-FW CL-256 5/16 or M8 CL-14-FW CL-257 3/8 or M10 CL-1-FW CL-8-FW CL-2-FW 1/2 or M12 CL-9-FW CL-258 CL-3-FW 5/8 or M16 CL-10-FW CL-259 CL-4-FW 3/4 or M18 CL-11-FW CL-260 M20 CLM-10-FW 7/8 or M22 CL-13-FW 1 CL-12-FW

A DIA 7/16 1/2 5/8 5/8 3/4 3/4 7/8 1 1-1/8 1-3/8 1-5/8 1-5/8 1-3/4 2

B C DIA 7/32 5/64 5/64 9/32 1/8 3/32 11/32 1/8 3/32 13/32 1/8 3/16 1/8 17/32 3/16 1/8 21/32 3/16 5/32 25/32 1/4 .827 1/4 29/32 1/4 1-1/32 9/32

FW P E 254 7FW

B IBP

IBP

KNURLED-FACE WASHERS 4130 STEEL, HEAT TREATED 125,000-140,000 PSI PER MIL-H-6875, ZINC PLATED YELLOW CHROMATE Serrated Washers Teeth Facing Inward

Flat washer with a serrated face to prevent two parts from sliding relative to each other. Close tolerance on ID to prevent bolt slippage.

USA PART NO. CL-3-KFW CL-4-KFW CL-5-KFW CL-6-KFW

BOLT DIA #10 1/4 5/16 3/8

IBP A DIA .1935 .2500 .3125 .3750

IBP

1.0 DIA

+.0005 A -.0010 KFW P E 3KFW

60째 30째

64 TEETH, 16 EQUALLY SPACED ON EACH DIAMETER WITH ALTERNATE ROWS STAGGERED

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

+.010 .040 -.000 (TYP.) +.000 .125 -.005 (TYP.)

Page 182 (Rev. 8-98)

CLAMP RESTS STEEL: 12L14, CARBURIZED-HARDENED, BLACK OXIDE FINISH STAINLESS STEEL: 300 SERIES

STEEL (USA)

Clamp Rest

PART NO. CL-1-CR CL-1A-CR CL-1B-CR CL-2-CR CL-3-CR CL-4-CR CL-5-CR CL-6-CR CL-7-CR CL-8-CR CL-9-CR

A 1/4-20

C DIA 5/32

D 1/8

F 7/16

E 1/4

G 1-1/8 1-11/16 5/16-18 7/32 3/16 5/16 1/2 2-7/16 2-1/32 3/8-16 11/32 7/32 3/8 9/16 3-21/32 2-1/8 1/2-13 11/32 1/4 1/2 11/16 3-5/8 2-3/8 7/8 5/8-11 15/32 1/4 5/8 3-5/8 2-1/2 3/4-10 15/32 1/4 5/8 1-1/16 3-5/8

CR P E 1CR

STEEL (METRIC) CLM-1-CR CLM-1A-CR CLM-2-CR Steel CLM-3-CR Rear support for Slotted-Heel Clamp Straps. CLM-4-CR Steel version has a hex head for adjustment, CLM-4A-CR and is furnished with a jam nut. Stainless steel CLM-5-CR version has a drilled hole for turning with a rod. CLM-7-CR CLM-8-CR CLM-9-CR

M6 M8

.157 .118 .217 .157

.20 10mm .31 13mm

M10

.343 .236

.39 17mm

M12

.343 .236

.59 19mm

M16

.472 .236

.59 24mm

M20

.472 .276

.59 30mm

1.06 1.77 1.93 3.70 2.13 3.70 2.13 3.70 2.48 3.66

STAINLESS STEEL (USA) PART NO. CL-13407 CL-13410 CL-13415 CL-13510 CL-13515 CL-13520 CL-13612 CL-13615 CL-13620 CL-13715 CL-13717 CL-13727

Stainless Steel

A #10-32 1/4-20 5/16-18 3/8-16

B 1/2 3/4 1-1/4 11/16 1-3/16 1-7/16 7/8 1-1/8 1-5/8 1-1/8 1-3/8 2-3/8

D C DIA E 3/4 1 3/32 1/8 1-1/2 1 1/8 1-1/2 1/8 3/16 1-3/4 1/4 1-1/4 1-1/2 5/32 3/16 2 1-1/2 1-3/4 3/16 3/16 2-3/4

CRS P E 13407

CLAMP REST SCREWS STEEL: 12L14, CARBURIZED-HARDENED, BLACK OXIDE FINISH

USA

Clamp Rest Screw Rear support for Drill-Spot-Heel Clamp Straps.

PART NO. A CL-1-CRS CL-2-CRS 3/8-16 CL-3-CRS CL-4-CRS CL-5-CRS 1/2-13 CL-6-CRS

B 2 2-1/2 3 2 2-1/2 3

C DIA

.250

.313

1/4

CRS P E 1CRS

.344

.313

3/8

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 183 (Rev. 7-02)

GUIDE BLOCKS 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

GB P E 2GB

Guide Block

Rear slide block for Tapped-Heel Clamp Straps. Guides Clamp Strap straight back for loading.

PART NO. CL-2-GB CL-4-GB CL-6-GB CL-8-GB CL-11-GB

FITS STUD SIZE 1/4-20 or M6 3/8-16 or M10 1/2-13 or M12 5/8-11 or M16 3/4-10 or M20

A .198 .265 .390 .515 .640

B .10 .20

C 1/4 1/2

D E 3/4 13/64 1-1/8 7/32

.25

5/8

1-1/2

.37

3/4

1-3/4

1/4

F G H J 1-3/16 #6-32 or M4 15/32 25/32 2 #10-32 or M5 3/4 1-9/16 1-11/16 1 1-3/16 1-5/8 1/4-20 or M6 1-1/8 2-13/32 1-1/4 1-29/32

CLAMP SPRINGS STEEL: SPRING STEEL, BLACK OXIDE FINISH STAINLESS STEEL: 300-SERIES SPRINGS P E 23407 55PG

IBP

Clamp Spring

Sturdy spring that holds up a Clamp Strap for clear loading. Stainless steel springs are also available in custom lengths from 0.3 inches to 10.0 inches, in 0.1-inch increments. Note: Custom-length springs have open ends, while standard-length springs have closed ends. Examples: CL-2430.7 Standard 0.7-inch length (#10-32) CL-2431.5 Custom 1.5-inch length (#10-32)

STEEL FITS STUD PART NO. SIZE CL-5-SPG 1/4-20 or M6 CL-6-SPG 5/16-18 or M8 CL-7-SPG 3/8-16 or M10 CL-9-SPG 1/2-13 or M12 CL-11-SPG 5/8-11 or M16 CL-13-SPG 3/4-10 or M20

NO. A OF C DIA B DIA COILS 19/64 1-1/8 7 23/64 1-7/32 .062 6 7/16 1-9/16 8 9/16 1-11/16 7 11/16 1-3/4 .091 5 13/16 2-1/2 6-1/2

STAINLESS STEEL CL-2430.7 CL-2440.7 CL-2450.7 CL-2461.0

#10-32 or M5 1/4-20 or M6 5/16-18 or M8 3/8-16 or M10

13/64 17/64 21/64 13/32

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

.042

5-1/2

.7 1.0

.049

5 7

Page 184 (Rev. 7-03)

EYE BOLTS STEEL: 1144, 115,000 PSI MIN. TENSILE STRENGTH, 100,000 PSI MIN. YIELD STRENGTH, BLACK OXIDE FINISH STAINLESS STEEL: 300 SERIES High-strength Eye Bolt with a reamed bearing hole. High-carbon steel, fully machined from solid barstock. Also available in stainless steel. Available in other lengths and materials as a special.

USA D STAINLESS STEEL DIA F STEEL A NOMINAL ACTUAL E NOMINAL ACTUAL PART NO. PART NO. B C CL-25-EB CL-25-EB-S 1/4-20 3/16 .188 2 3/4 1/2 1/4 .250 CL-26-EB CL-26-EB-S 3 1-1/4 CL-31-EB 3 1-1/2 5/16-18 1/4 5/8 5/16 .312 .250 CL-32-EB 4 2 5/16 .312 CL-38-EB 3 1-1/2 CL-40-EB CL-40-EB-S 3/8-16 3 1-1/2 3/4 3/8 .375 3/8 .375 3-3/4 2 CL-37-EB CL-39-EB CL-39-EB-S 5 2-1/2 CL-50-EB CL-50-EB-S 1/2-13 3/8 .375 3-3/4 1-1/2 1 1/2 .500 CL-51-EB CL-51-EB-S 5 2 CL-62-EB 4-1/2 2 5/8-11 5/8 1-1/4 5/8 .625 .625 CL-63-EB 6 2-1/2 .625 CL-75-EB 6 2-1/2 1-1/2 3/4 3/4-10 5/8 .750 3/4 .750 CL-76-EB 6 2-1/2

METRIC CLM-25A-EB CLM-26A-EB CLM-31A-EB CLM-32A-EB CLM-40-EB CLM-37-EB CLM-39-EB CLM-50A-EB CLM-51A-EB CLM-62-EB CLM-63-EB CLM-76A-EB

Eye Bolt E DIA

D REAM +.002 -.000

IBP

A THD. CLASS 2A

+.000 -.005

C B

6mm

8mm

M10

10mm

M12

12mm

M16

16mm

M20

20mm

.236 1.97 2.95 .315 2.95 3.94 2.95 .394 3.94 4.92 .472 3.94 4.92 .630 4.53 5.91 .787 5.91

.79 .47 6mm 1.18 1.57 .63 8mm 1.97 1.57 1.97 .79 10mm 2.56 1.57 .94 12mm 1.97 1.97 1.26 16mm 2.56 2.56 1.57 20mm

.236 .315 .394 .472 .630 .787

SWING BOLTS STEEL: 1144, 115,000 PSI MIN. TENSILE STRENGTH, 100,000 PSI MIN. YIELD STRENGTH, BLACK OXIDE FINISH

USA B DIA

Shoulder-type Eye Bolt that can be used as a stationary hinge point. Reamed hole for smooth bearing.

PART NO. CL-00-SB CL-0-SB CL-1-SB CL-2-SB CL-2A-SB CL-3-SB CL-3A-SB

A NOMINAL ACTUAL C 1/4-20 1/4 .250 3/4 1 5/16-18 5/16 .312 3/8-16 3/8 .375 1-3/8 1-3/4 1/2-13 1/2 .500 2-1/4 1-3/4 5/8-11 5/8 .625 2-1/2

G F E DIA NOMINAL ACTUAL H D 1-3/16 1-1/2 1/2 5/16 .312 5/16 3/8 .375 3/8 1-5/8 2 5/8 1/2 .500 1/2 2 2-1/2 3/4 2-1/2 3-1/8 1 5/8 .625 5/8 3-1/2 4-1/8 2-3/4 3-1/2 1-1/4 3/4 .750 3/4 4 4-3/4

METRIC G

IBP

E REF. D C

F +.002 B REAM –.000

A IBP

CLM-00-SB M6 M8 CLM-0-SB M10 CLM-1-SB CLM-2B-SB M12 CLM-2C-SB CLM-3-SB M16 CLM-3A-SB

6mm .236 .79 8mm .315 .98 10mm .394 1.38 12mm .472 1.77 2.17 16mm .630 1.77 2.56

1.18 1.57 1.97 2.56 3.54 2.76 3.94

1.57 1.96 2.56 3.15 4.13 3.55 4.73

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

.47 8mm .315 .39 .63 10mm .394 .79 12mm .472 .59 .94 14mm .551 .59 1.26 18mm .709 .79

Page 185 (Rev. 11-04)

DOUBLE CAMS 1020 STEEL, CARBURIZED-HARDENED BLACK OXIDE FINISH

Straddle-type cam handle that can be used with an Eyebolt or custom-made drawbar. Continuous-rise spiral cam locks securely in any position. Available in six USA and five metric sizes.

CH P E 11CH

USA MATCHING EYEBOLT

PART NO. CL-11-CH CL-11A-CH CL-12-CH CL-13-CH CL-14-CH CL-15-CH

SIZE

A DIA

.54 .50 .69 .76 .85 .89 1.00 1.15

DOWEL PIN REQD CL-3/16X.62-CADP CL-1/4X.62-CADP CL-5/16X.87-CADP CL-3/8X1.00-CADP CL-5/8X1.25-CADP CL-5/8X1.50-CADP

.33 .38 .54 .50 .69 .76 .85 .89 1.00 1.15

CLM-6X16-CADP CLM-10X24-CADP CLM-12X30-CADP CLM-16X36-CADP CLM-20X40-CADP

B C E F G H J .266 3/16 2-17/32 .046 1/4 5/8 .40 .328 5/32 .390 3-13/16 .062 5/16 7/8 1/4 .52 .516 4-5/8 .094 1/2 1-1/8 5/16 .79 .641 4-15/16 .109 9/16 1-1/4 .92 .766 5-1/8 .141 5/8 1-1/2 3/8 1.19

NOMINAL ACTUAL NOMINAL ACTUAL

1/4-20 3/16 .188 1/4 5/16-18 1/4 .250 5/16 3/8-16 5/16 .313 3/8 1/2-13 3/8 .376 1/2 5/8-11 5/8 .626 5/8 3/4-10 5/8 .626 3/4

.33 .38

METRIC Double Cams are used with Eyebolts on Slotted-Heel Clamp Assemblies. See page 216.

CLM-11-CH CLM-12-CH CLM-13-CH CLM-14-CH CLM-15-CH

M6 M10 M12 M16 M20

6mm 10mm 12mm 16mm 20mm

.237 .395 .473 .631 .788

6mm 10mm 12mm 16mm 20mm

.266 2-17/32 .046 1/4 5/8 3/16 .409 3-13/16 .062 5/16 7/8 1/4 .516 4-5/8 .094 1/2 1-1/8 5/16 .641 4-15/16 .109 9/16 1-1/4 .803 5-1/8 .141 5/8 1-1/2 3/8

.40 .52 .79 .92 1.19

SINGLE CAMS 1020 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

CH P E 1CH

Simple cam handle that mounts in a slot, or against a flat surface. Continuous-rise spiral cam locks securely in any position. Available in five sizes.

A PART NO. DIA CL-1-CH 5/32 CL-2-CH 1/4 CL-3-CH 5/16 CL-4-CH 3/8 CL-5-CH 1/2

B C 3/16 .38 1/4 .50 3/8 .76 1/2 .89 5/8 1.15

E .046 .062 .094 .109 .141

F G 2-1/4 3/16 3-1/4 1/4 4-1/2 3/8 5 7/16 5-1/2 1/2

J .40 .52 .79 .92 1.19

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

DOWEL PIN K REQD 1/2 CL-5/32X.62-CADP 11/16 CL-1/4X1.00-CADP 7/8 CL-5/16X1.25-CADP 15/16 CL-3/8X1.50-CADP 1 CL-1/2X1.75-CADP

Page 186 (Rev. 4-05)

STEP BLOCKS & CLAMPS 11L17 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

STEP BLOCKS (PAIR) Step Blocks (pair)

Serrated block that can be used individually or in pairs, as a clamp rest. (One part number consists of a pair of blocks). Use a single block with Step Clamps, or a pair of blocks with Plain Clamps. All blocks and clamps are made from top-grade steel.

BS P E R

HEIGHT PART NO. A B C RANGE CL-10-BS .681 1.104 3/4 to 1-1/2 CL-20-BS 1 1.068 1.747 1-1/8 to 2-1/2 CL-30-BS 2.355 3.980 2-1/2 to 6 CL-40-BS 1.454 2.390 1-3/4 to 3-3/4 CL-50-BS 1-1/2 2.355 3.890 2-1/2 to 6 CL-60-BS 3.385 5.604 3-1/2 to 9 CL-70-BS 1.454 2.390 1-3/4 to 3-3/4 CL-80-BS 2 2.355 3.890 2-1/2 to 6 CL-90-BS 3.385 5.604 3-1/2 to 9

10BS

IBP

STEP CLAMPS STC P E 32STC

IBP E

Step Clamp

C H

IBP

PART NO. CL-32-STC CL-34-STC CL-36-STC CL-42-STC CL-44-STC CL-46-STC CL-52-STC CL-54-STC CL-56-STC CL-64-STC CL-66-STC CL-68-STC

STUD SIZE 3/8 or M10 1/2 or M12 5/8 or M16 3/4 or M20

A 2-1/2 4 6 2-1/2 4 6 2-1/2 4 6 4 6 8

B 1/2 5/8 3/4 1/2 3/4 7/8 5/8 3/4 7/8 3/4 1

C 1 1-1/8 1-1/8 1-1/4 1-1/4 1-1/2 1-1/2 1-3/4

D 7/16 11/16 3/4 7/16 11/16 3/4 3/8 11/16 3/4 3/4 13/16 3/4

E 7/8 1-3/16 1-1/8 29/32 1-7/32 1-5/32 15/16 1-1/4 1-9/32 1-5/16 1-1/4 1-7/8

F G 13/16 1-5/16 7/16 2-3/16 11/16 1-3/16 9/16 2-1/8 9/16 1-1/16 11/16 1-15/16 15/16 1-7/8 13/16 2-3/16

H 7/16 1/4 3/8 9/16 1/2 7/16 3/4 11/16 9/16 5/8 3/4

J 1/4 5/16 3/16 1/4 5/16 3/8 7/16 5/16 1/2 5/8

PLAIN CLAMPS PC P E 32PC

Plain Clamp

IBP

D TYP

B A IBP

J TYP

PART NO. CL-32-PC CL-34-PC CL-36-PC CL-42-PC CL-44-PC CL-46-PC CL-52-PC CL-54-PC CL-56-PC CL-64-PC CL-66-PC CL-68-PC

STUD SIZE 3/8 or M10 1/2 or M12 5/8 or M16 3/4 or M20

A 2-1/2 4 6 2-1/2 4 6 2-1/2 4 6 4 6 8

B 1/2 5/8 3/4 1/2 3/4 7/8 5/8 3/4 7/8 3/4 1

C 1 1-1/8 1-1/8 1-1/4 1-1/4 1-1/2 1-1/2 1-3/4

D 7/16 11/16 3/4 7/16 11/16 3/4 3/8 11/16 3/4 3/4 13/16 3/4

E 7/8 1-3/16 1-1/8 29/32 1-7/32 1-5/32 15/16 1-1/4 1-9/32 1-5/16 1-1/4 1-7/8

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

F 13/16 1-5/16 2-3/16 11/16 1-3/16 2-1/8 9/16 1-1/16 1-5/16 15/16 1-7/8 2-3/16

H 7/16 7/16 1/4 3/8 9/16 9/16 1/2 7/16 3/4 11/16 11/16 9/16 13/16

5/8 3/4

J 1/4 5/16 3/16 1/4 5/16 3/8 7/16 5/16 1/2 5/8

Page 187 (Rev. 7-02)

STEP BLOCKS & CLAMPS 11L17 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

Step Block & Clamp Set

An assortment of Step Clamps and Step Blocks in a handy wooden holder. Available for stud sizes from 3/8-16 to 3/4-10 (M10 to M20 metric studs).

STEP BLOCK & CLAMP SETS PART NO. CL-10-SBC CL-20-SBC CL-40-SBC CL-30-SBC CL-50-SBC CL-60-SBC

STEP BLOCK PAIRS STUD STEP CLAMPS (2) EACH SIZE (2) EACH 3/8-16 or M10 CL-32-STC, CL-34-STC, CL-36-STC STANDARD CL-10-BS, CL-20-BS, CL-30-BS 1/2-13 or M12 CL-42-STC, CL-44-STC, CL-46-STC STANDARD CL-10-BS, CL-20-BS, CL-30-BS HIGH-RISE CL-40-BS, CL-50-BS, CL-60-BS 5/8-11 or M16 CL-52-STC, CL-54-STC, CL-56-STC STANDARD CL-10-BS, CL-20-BS, CL-30-BS HIGH-RISE CL-40-BS, CL-50-BS, CL-60-BS 3/4-10 or M20 CL-64-STC, CL-66-STC, CL-68-STC HIGH-RISE CL-40-BS, CL-50-BS, CL-60-BS

HOLDER CL-1-BSH CL-1-BSH CL-2-BSH CL-1-BSH CL-2-BSH CL-3-BSH

Step Block Set

A complete assortment of Step Blocks in a handy wooden box.

STEP BLOCK SETS PART NO. STEP BLOCK PAIRS BOX CL-30-SBS (4)CL-10-BS, (4)CL-20-BS, (2)CL-30-BS CL-3-SBB

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 188 (Rev. 7-02)

T-SLOT BOLTS FORGED 1045 STEEL, BLACK OXIDE FINISH

T-SLOT BOLTS (USA)

T-Slot Bolt

High-strength bolt for T-slotted machine tables. Full bearing surfaces prevent twisting or jamming in table slots. Available in thread sizes from 3/8-16 to 3/4-10, each in a choice of several lengths. B THREAD E G C

A D

PART NO. CL-6-TSB-1.00 CL-6-TSB-1.50 CL-6-TSB-2.00 CL-6-TSB-2.50 CL-6-TSB-3.00 CL-6-TSB-3.50 CL-6-TSB-4.00 CL-8-TSB-1.50 CL-8-TSB-2.00 CL-8-TSB-2.50 CL-8-TSB-3.00 CL-8-TSB-3.50 CL-8-TSB-4.00 CL-8-TSB-5.00 CL-8-TSB-6.00 CL-10-TSB-1.50 CL-10-TSB-2.00 CL-10-TSB-2.50 CL-10-TSB-3.00 CL-10-TSB-3.50 CL-10-TSB-4.00 CL-10-TSB-5.00 CL-10-TSB-6.00 CL-10-TSB-8.00 CL-12-TSB-3.00 CL-12-TSB-3.50 CL-12-TSB-4.00 CL-12-TSB-5.00 CL-12-TSB-6.00 CL-12-TSB-8.00

B THREAD

3/8-16

3/8

1/2-13

5/8-11

3/4-10

1/2

5/8

3/4

FITS TABLE SLOTS

F LENGTH 1.00 1.50 3/8 2.00 7/16 1/2 3/16 5/8 13/16 2.50 3.00 10mm 3.50 12mm 4.00 1.50 2.00 1/2 2.50 9/16 3.00 5/8 5/16 13/16 15/16 3.50 14mm 4.00 16mm 5.00 6.00 1.50 2.00 5/8 2.50 11/16 3.00 3/4 13/32 1-1/32 1-3/16 3.50 18mm 4.00 20mm 5.00 6.00 8.00 3.00 3/4 3.50 13/16 4.00 7/16 1-1/4 1-7/16 20mm 5.00 22mm 6.00 8.00 C

G .62 1.00 1.25 1.50 1.00 1.25 1.50 2.00 1.00 1.25 1.50 2.00 3.00 1.50 2.00 3.00

T-SLOT BOLT KITS (USA) PART NO.

T-Slot Bolt Kit

FITS TABLE SIZES

CL-6-TSBK

3/8, 7/16, 1/2 10mm, 12mm

CL-8-TSBK

1/2, 9/16, 5/8 14mm, 16mm

34-piece set includes a complete range of T-Slot-Bolt lengths, with matching 5/8, 11/16, 3/4 extension Studs, Flange Nuts, and CL-10-TSBK 16mm, 18mm Coupling Nuts. Set includes: (4) T-Slot Bolts in each of five different lengths (4) Studs 3/4, 13/16 CL-12-TSBK 20mm, 22mm (6) Flange Nuts (4) Coupling Nuts (1) Handy Holder

T-SLOT BOLTS (4 EACH) CL-6-TSB-1.50 CL-6-TSB-2.00 CL-6-TSB-2.50 CL-6-TSB-3.00 CL-6-TSB-4.00 CL-8-TSB-2.00 CL-8-TSB-3.00 CL-8-TSB-4.00 CL-8-TSB-5.00 CL-8-TSB-6.00 CL-10-TSB-3.00 CL-10-TSB-4.00 CL-10-TSB-5.00 CL-10-TSB-6.00 CL-10-TSB-8.00 CL-12-TSB-3.00 CL-12-TSB-4.00 CL-12-TSB-5.00 CL-12-TSB-6.00 CL-12-TSB-8.00

STUDS (4)

FLANGE COUPLING NUTS NUTS HOLDER (6) (4) (1)

CL-3/8-16X4.00-STUD CL-2-FN CL-1-CN CL-1-TNH

CL-1/2-13X5.00-STUD CL-3-FN CL-2-CN CL-2-TNH

CL-5/8-11X6.00-STUD CL-4-FN CL-3-CN CL-3-TNH

CL-3/4-10X7.00-STUD CL-5-FN CL-4-CN CL-4-TNH

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 189 (Rev. 5-05)

CLAMPING STUDS STEEL: 1144 STEEL, 100,000 PSI MIN. YIELD, 115,000 PSI MIN. TENSILE, BLACK OXIDE FINISH STAINLESS STEEL: 300 SERIES

STAINLESS STEEL (USA) (Cont.)

, IZES S ! NEWLUDING STEEL INC INLESS STA

STUDS P E

High-strength general-purpose clamping stud, for use with a T-Nut, or for installation directly into a fixture plate. Available in thread sizes from 1/4-20 to 1"-8 (M6 to M20 in metric), each in a choice of several lengths. Now also available in stainless steel, in 3/8-16, 1/2-13, and 5/8-11 thread sizes (for smaller stainless sizes, see Fixture Studs, page 165).

STEEL (USA) (Cont.)

14201.50STUD

STEEL (USA) THREAD PART NO. SIZE LENGTH A CL-1/4-20X1.50-STUD 1.50 5/8 CL-1/4-20X2.00-STUD 2.00 7/8 CL-1/4-20X2.50-STUD 2.50 1/4-20 CL-1/4-20X3.00-STUD 3.00 1 CL-1/4-20X3.50-STUD 3.50 CL-1/4-20X4.00-STUD 4.00 CL-5/16-18X1.50-STUD 1.50 9/16 CL-5/16-18X2.00-STUD 2.00 13/16 CL-5/16-18X2.50-STUD 2.50 1-1/16 CL-5/16-18X3.00-STUD 3.00 CL-5/16-18X3.50-STUD 5/16-18 3.50 CL-5/16-18X4.00-STUD 4.00 1-1/8 CL-5/16-18X5.00-STUD 5.00 CL-5/16-18X6.00-STUD 6.00 CL-3/8-16X1.50-STUD 1.50 9/16 CL-3/8-16X2.00-STUD 2.00 13/16 CL-3/8-16X2.50-STUD 2.50 1-1/16 CL-3/8-16X3.00-STUD 3.00 CL-3/8-16X3.50-STUD 3.50 CL-3/8-16X4.00-STUD 4.00 CL-3/8-16X4.50-STUD 3/8-16 4.50 CL-3/8-16X5.00-STUD 5.00 1-1/4 CL-3/8-16X5.50-STUD 5.50 CL-3/8-16X6.00-STUD 6.00 CL-3/8-16X6.50-STUD 6.50 CL-3/8-16X7.00-STUD 7.00 CL-3/8-16X7.50-STUD 7.50 CL-3/8-16X8.00-STUD 8.00 CL-1/2-13X2.00-STUD 2.00 3/4 CL-1/2-13X2.50-STUD 2.50 1 CL-1/2-13X3.00-STUD 3.00 1-1/4 CL-1/2-13X3.50-STUD 3.50 CL-1/2-13X4.00-STUD 4.00 CL-1/2-13X4.50-STUD 4.50 CL-1/2-13X5.00-STUD 5.00 CL-1/2-13X5.50-STUD 5.50 1-1/2 CL-1/2-13X6.00-STUD 1/2-13 6.00 CL-1/2-13X6.50-STUD 6.50 CL-1/2-13X7.00-STUD 7.00 CL-1/2-13X7.50-STUD 7.50 CL-1/2-13X8.00-STUD 8.00 CL-1/2-13X9.00-STUD 9.00 CL-1/2-13X10.00-STUD 10.00 2 CL-1/2-13X12.00-STUD 12.00

PART NO. CL-5/8-11X2.50-STUD CL-5/8-11X3.00-STUD CL-5/8-11X3.50-STUD CL-5/8-11X4.00-STUD CL-5/8-11X4.50-STUD CL-5/8-11X5.00-STUD CL-5/8-11X5.50-STUD CL-5/8-11X6.00-STUD CL-5/8-11X6.50-STUD CL-5/8-11X7.00-STUD CL-5/8-11X7.50-STUD CL-5/8-11X8.00-STUD CL-5/8-11X9.00-STUD CL-5/8-11X10.00-STUD CL-5/8-11X12.00-STUD CL-5/8-11X14.00-STUD CL-3/4-10X3.00-STUD CL-3/4-10X3.50-STUD CL-3/4-10X4.00-STUD CL-3/4-10X5.00-STUD CL-3/4-10X6.00-STUD CL-3/4-10X7.00-STUD CL-3/4-10X8.00-STUD CL-3/4-10X9.00-STUD CL-3/4-10X10.00-STUD CL-3/4-10X12.00-STUD CL-3/4-10X14.00-STUD CL-3/4-10X16.00-STUD CL-7/8-9X4.00-STUD CL-7/8-9X5.00-STUD CL-7/8-9X6.00-STUD CL-7/8-9X8.00-STUD CL-7/8-9X10.00-STUD CL-7/8-9X12.00-STUD CL-1-8X4.00-STUD CL-1-8X5.00-STUD CL-1-8X6.00-STUD CL-1-8X8.00-STUD CL-1-8X10.00-STUD CL-1-8X12.00-STUD

THREAD SIZE LENGTH 2.50 3.00 3.50 4.00 4.50 5.00 5.50 6.00 6.50 5/8-11 7.00 7.50 8.00 9.00 10.00 12.00 14.00 3.00 3.50 4.00 5.00 6.00 7.00 3/4-10 8.00 9.00 10.00 12.00 14.00 16.00 4.00 5.00 6.00 7/8-9 8.00 10.00 12.00 4.00 5.00 6.00 1-8 8.00 10.00 12.00

A 15/16 1-3/16 1-7/16 1-11/16

1-3/4

2 1-1/8 1-3/8 1-5/8

1-9/16 2-1/16 2-1/4 1-1/2 2 2-1/2

STAINLESS STEEL (USA) CL-3/8-16X2.00-STUD-S CL-3/8-16X2.50-STUD-S CL-3/8-16X3.00-STUD-S CL-3/8-16X3.50-STUD-S CL-3/8-16X4.00-STUD-S 3/8-16 CL-3/8-16X4.50-STUD-S CL-3/8-16X5.00-STUD-S CL-3/8-16X6.00-STUD-S

2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00

13/16 1-1/16 1-1/4

THREAD PART NO. SIZE LENGTH A CL-1/2-13X2.00-STUD-S 2.00 3/4 CL-1/2-13X2.50-STUD-S 2.50 1 CL-1/2-13X3.00-STUD-S 3.00 1-1/4 CL-1/2-13X3.50-STUD-S 3.50 CL-1/2-13X4.00-STUD-S 1/2-13 4.00 CL-1/2-13X4.50-STUD-S 4.50 1-1/2 CL-1/2-13X5.00-STUD-S 5.00 CL-1/2-13X5.50-STUD-S 5.50 CL-1/2-13X6.00-STUD-S 6.00 CL-5/8-11X2.50-STUD-S 2.50 15/16 CL-5/8-11X3.00-STUD-S 3.00 1-3/16 CL-5/8-11X3.50-STUD-S 3.50 1-7/16 CL-5/8-11X4.00-STUD-S 4.00 1-11/16 5/8-11 CL-5/8-11X4.50-STUD-S 4.50 CL-5/8-11X5.00-STUD-S 5.00 1-3/4 CL-5/8-11X5.50-STUD-S 5.50 CL-5/8-11X6.00-STUD-S 6.00

STEEL (METRIC) CLM-6X-35-STUD CLM-6X-50-STUD CLM-6X-65-STUD CLM-6X-80-STUD CLM-6X-95-STUD CLM-6X-110-STUD CLM-8X-50-STUD CLM-8X-65-STUD CLM-8X-80-STUD CLM-8X-95-STUD CLM-8X-110-STUD CLM-10X-50-STUD CLM-10X-65-STUD CLM-10X-80-STUD CLM-10X-95-STUD CLM-10X-110-STUD CLM-10X-125-STUD CLM-10X-150-STUD CLM-10X-175-STUD CLM-10X-200-STUD CLM-12X-65-STUD CLM-12X-80-STUD CLM-12X-95-STUD CLM-12X-110-STUD CLM-12X-125-STUD CLM-12X-150-STUD CLM-12X-175-STUD CLM-12X-200-STUD CLM-12X-250-STUD CLM-12X-300-STUD CLM-16X-80-STUD CLM-16X-95-STUD CLM-16X-110-STUD CLM-16X-125-STUD CLM-16X-150-STUD CLM-16X-175-STUD CLM-16X-200-STUD CLM-16X-250-STUD CLM-20X-80-STUD CLM-20X-95-STUD CLM-20X-110-STUD CLM-20X-125-STUD CLM-20X-150-STUD CLM-20X-175-STUD CLM-20X-200-STUD

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

M10

M12

M16

M20

35mm (1.38) 50mm (1.97) 65mm (2.56) 80mm (3.15) 95mm (3.75) 110mm (4.33) 50mm ( 1.97) 65mm (2.56) 80mm (3.15) 95mm (3.74) 110mm (4.33) 50mm ( 1.97) 65mm (2.56) 80mm (3.15) 95mm (3.74) 110mm (4.33) 125mm (4.92) 150mm (5.91) 175mm (6.89) 200mm (7.87) 65mm (2.56) 80mm (3.15) 95mm (3.74) 110mm (4.33) 125mm (4.92) 150mm (5.91) 175mm (6.89) 200mm (7.87) 250mm (9.84) 300mm (11.81) 80mm (3.15) 95mm (3.74) 110mm (4.33) 125mm (4.92) 150mm (5.91) 175mm (6.89) 200mm (7.87) 250mm (9.84) 80mm (3.15) 95mm (3.74) 110mm (4.33) 125mm (4.92) 150mm (5.91) 175mm (6.89) 200mm (7.87)

.59 .87 1.06 .83 1.14 1.22 .79 1.08

1.38

1.04 1.34

1.54

1.26 1.56

1.85

1.18 1.48 1.77 2.07 2.17

Page 190 (Rev. 7-02)

FIXTURE STUDS 300-SERIES STAINLESS STEEL, PASSIVATED

STUDS P E

STAINLESS STEEL (USA)

11310

Stainless Steel

Fixture studs have an interference thread to install permanently into a fixture plate, instead of into a T nut. These studs are available in small sizes from #10-24 to 3/8-16, each in a choice of several lengths.

PART NO. CL-11310 CL-11315 CL-11320 CL-11410 CL-11415 CL-11420 CL-11515 CL-11520 CL-11525 CL-11530 CL-11615 CL-11620 CL-11625 CL-11715 CL-11725 CL-11730 CL-11740

A #10-24 #10-32

1/4-20

5/16-18

3/8-16

B 1 1-1/2 2 1 1-1/2 2 1-1/2 2 2-1/2 3 1-1/2 2 2-1/2 1-1/2 2-1/2 3 4

C 1/2 3/4 3/4 1/2 3/4 3/4 5/8 3/4 3/4 1 5/8 1 1-1/4 3/4 1-1/4 1-3/8 1-1/2

D 7/32 7/32

9/32

11/32

T BOLTS 4140 STEEL, HEAT TREATED, 130,000 PSI MIN. YIELD STRENGTH, 150,000 PSI MIN. TENSILE STRENGTH, BLACK OXIDE FINISH

USA

High-strength alloy steel clamping bolts for use in T slots. Available in larger thread sizes from 1/2-13 to 1"-8 (M12 to M24 in metric), each in a choice of several lengths.

PART NO. CL-1-TB-1.50 CL-1-TB-2.00 CL-1-TB-2.50 CL-1-TB-3.00 CL-1-TB-3.50 CL-1-TB-4.00 CL-1-TB-5.00 CL-1-TB-6.00 CL-1-TB-8.00 CL-2-TB-1.50 CL-2-TB-2.00 CL-2-TB-2.50 CL-2-TB-3.00 CL-2-TB-3.50 CL-2-TB-4.00 CL-2-TB-5.00 CL-2-TB-6.00 CL-2-TB-8.00 CL-3-TB-2.00 CL-3-TB-3.00 CL-3-TB-4.00 CL-3-TB-5.00 CL-3-TB-6.00 CL-3-TB-7.00 CL-3-TB-8.00 CL-4-TB-4.00 CL-4-TB-5.00 CL-4-TB-6.00 CL-5-TB-4.00 CL-5-TB-5.00 CL-5-TB-6.00 CL-5-TB-7.00 CL-5-TB-8.00

1/2-13 5/16

7/8

1-1/4

5/8-11 13/32 1-1/8 1-1/4

3/4-10 17/32 1-5/16 1-3/4

7/8-9

1-8

5/8

1-1/2

11/16 1-11/16 3-1/2

LENGTH 1.50 2.00 2.50 3.00 3.50 4.00 5.00 6.00 8.00 1.50 2.00 2.50 3.00 3.50 4.00 5.00 6.00 8.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 4.00 5.00 6.00 4.00 5.00 6.00 7.00 8.00

TB P E 1TB1.50

METRIC PART NO. CLM-12-TB-50 CLM-12-TB-65 CLM-12-TB-80 CLM-12-TB-95 CLM-12-TB-110 CLM-12-TB-125 CLM-12-TB-150 CLM-12-TB-200 CLM-16-TB-50 CLM-16-TB-65 CLM-16-TB-80 CLM-16-TB-95 CLM-16-TB-110 CLM-16-TB-125 CLM-16-TB-150 CLM-16-TB-200 CLM-20-TB-50 CLM-20-TB-75 CLM-20-TB-100 CLM-20-TB-125 CLM-20-TB-150 CLM-20-TB-200 CLM-24-TB-100 CLM-24-TB-125 CLM-24-TB-150 CLM-24-TB-200

M12 .39 .79 1.18

M16 .39 1.18 1.18

M20 .59 1.38 1.77

M24 .79 1.77 3.54

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

LENGTH 50mm (1.97) 65mm (2.56) 80mm (3.15) 95mm (3.74) 110mm (4.33) 125mm (4.92) 150mm (5.91) 200mm (7.87) 50mm (1.97) 65mm (2.56) 80mm (3.15) 95mm (3.74) 110mm (4.33) 125mm (4.92) 150mm (5.91) 200mm (7.87) 50mm (1.97) 75mm (2.95) 100mm (3.94) 125mm (4.92) 150mm (5.91) 200mm (7.87) 100mm (3.94) 125mm (4.92) 150mm (5.91) 200mm (7.87)

Page 191 (Rev. 4-05)

T NUTS

STEEL: MILD STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH STAINLESS: 300-SERIES STAINLESS STEEL, PASSIVATED

– IZES S NEW ALSO IN ! NOW ILABLE STEEL AVA INLESS STA PART NO.

STEEL (USA) TABLE SLOT SIZE

CL-18-TN 3/8 or 10mm CL-19-TN CL-20-TN 7/16 CL-00-TN CL-12-TN 12mm CL-21-TN 1/2 CL-0-TN CL-1-TN 9/16 or 14mm CL-9-TN CL-16-TN 5/8 or 16mm CL-2-TN CL-3-TN CL-10-TN 11/16 or 18mm CL-10A-TN CL-17-TN 3/4 CL-4-TN CL-14-TN 20mm CL-5-TN 13/16 CL-11-TN CL-15-TN 22mm CL-6-TN 7/8 CL-7-TN 1 CL-22-TN CL-8-TN 1-1/16 CL-23-TN CL-24-TN 1-1/8 CL-25-TN

Sizes for all standard machine tables. Safety-stop feature prevents breaking the machinetable slot. Threads stop one short of going through T nut to prevent a stud from jacking the nut out of the table.

T NUT

A THD. CLASS 2 D

1/2-13 5/8-11 5/8-11 5/8-11 3/4-10 3/4-10 3/4-10 3/4-10 7/8-9 3/4-10 7/8-9 7/8-9 1-8

.370

5/8

7/8

7/16

.432

11/16

7/8

.467

3/4

1/2 1/2

17/64

1/2

9/32

7/8

7/8 7/8 1-1/8

1/2 5/8

5/16 11/32

1-1/8

5/8

11/32

1-1/8

1-1/4 1-1/4 1-1/2

3/4 3/4 1-1/8

7/16 7/16 15/32

1-1/4

3/4

15/32

F 7/32

.495 .550 .620 .682 .682 .675 .745 .782

7/8

.807

1-1/4

1-1/2

9/16

.861 .870

1-1/4 1-1/2

1-1/2

1/2 9/16

1-3/4

5/8

1-1/8

11/16

1-1/2

3/4

E 1/2 1/2 1/2 5/8 5/8

.995 1-5/8 1.057 1.120

1-3/4

PART NO. CL-00-STN CL-0-STN CL-1-STN 9/16 or 14mm CL-9-STN CL-2-STN 5/8 or 16mm CL-3-STN 11/16 or 18mm CL-10-STN

A 3/8-16 3/8-16 1/2-13 1/2-13 1/2-13 5/8-11

.620

D 7/8 7/8 7/8 1-1/8 1-1/8

.682

1-1/8

1-1/4

3/4

F 7/32 9/32 5/16 11/32 11/32 7/16

D 7/8 3/4 7/8

E 7/16 1/2 1/2

F 7/32 17/64 9/32

B .432 .495

C 11/16 7/8

.550

7/8

00TN

IBP

5/8-11

STAINLESS STEEL (USA) TABLE SLOT SIZE 7/16 1/2

TN P E

A 1/4-20 5/16-18 5/16-18 3/8-16 3/8-16 5/16-18 3/8-16 3/8-16 1/2-13 3/8-16 1/2-13 1/2-13

+.000 -.010 IBP

F +0 -1/64 C±.010

STEEL (METRIC) TABLE SLOT SIZE 3/8 or 10mm 12mm 1/2

PART NO. CLM-19-TN CLM-00-TN CLM-0-TN CLM-1-TN 9/16 or 14mm CLM-9-TN CLM-2-TN 5/8 or 16mm CLM-3-TN 11/16 or 18mm CLM-10-TN CLM-4-TN 20mm CLM-5-TN 13/16 CLM-6-TN 22mm

A M8 M10 M10 M12 M12 M12 M16 M16 M20

B .370 .467 .495

C 5/8 3/4 7/8

.546

7/8

5/8

5/16

.620

1-1/8

5/8

11/32

.682

1-1/8

1-1/4

3/4

7/16

1-1/4

1-1/4 1-1/2 1-1/2

7/8 1 1

15/32 9/16 1/2

.782 .807 .861

1-1/4

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 192 (Rev. 7-04)

T NUT & STUD SETS SEE PAGES 178, 189, AND 191 FOR MATERIAL SPECIFICATIONS

T NUT & STUD SETS (USA)

38-piece set includes a complete range of stud lengths with matching T nuts, flange nuts, and coupling nuts — all mounted in a handy wooden holder. Set includes: (4) Studs of each length 3", 4", 5", 6", 7", 8", or 80, 95, 125, 150, 175, 200mm (6) T Nuts (6) Flange Nuts (4) Coupling Nuts (1) Handy Holder

PART NO. CL-1-TNS CL-14-TNS CL-2-TNS CL-3-TNS CL-4-TNS CL-17-TNS CL-5-TNS CL-6-TNS CL-7-TNS CL-18-TNS CL-8-TNS CL-15-TNS CL-9-TNS CL-10-TNS CL-16-TNS CL-11-TNS CL-12-TNS CL-13-TNS

TABLE SLOT SIZE 7/16 12mm 1/2

STUDS (24) 3/8-16

9/16 or 14mm 3/8-16 1/2-13 5/8 or 16mm 3/8-16 1/2-13 1/2-13 11/16 or 18mm 5/8-11 1/2-13 3/4 5/8-11 20mm 5/8-11 13/16 3/4-10 22mm 7/8 3/4-10 1 1-1/16

T NUTS (6) CL-00-TN CL-12-TN CL-0-TN CL-1-TN CL-9-TN CL-16-TN CL-2-TN CL-3-TN CL-10-TN CL-17-TN CL-4-TN CL-14-TN CL-5-TN CL-11-TN CL-15-TN CL-6-TN CL-7-TN CL-8-TN

FLANGE NUTS (6)

COUPLING NUTS (4)

HOLDER (1)

CL-2-FN

CL-1-CN

CL-1-TNH

CL-2-FN CL-3-FN CL-2-FN CL-3-FN CL-3-FN CL-4-FN CL-3-FN

CL-1-CN CL-2-CN CL-1-CN CL-2-CN CL-2-CN CL-3-CN CL-2-CN

CL-1-TNH CL-2-TNH CL-1-TNH CL-2-TNH CL-2-TNH CL-3-TNH CL-2-TNH

CL-4-FN

CL-3-CN

CL-3-TNH

CL-4-FN CL-5-FN

CL-3-CN CL-4-CN

CL-3-TNH CL-4-TNH

CL-5-FN

CL-4-CN

CL-4-TNH

T NUT & STUD SETS (METRIC) CLM-1-TNS 12mm CLM-2-TNS 1/2 CLM-3-TNS 9/16 or 14mm CLM-4-TNS CLM-5-TNS 5/8 or 16mm CLM-6-TNS 11/16 or 18mm CLM-7-TNS CLM-8-TNS 20mm CLM-9-TNS 13/16 CLM-11-TNS 22mm

M10 CLM-00-TN CLM-10-FN CLM-0-TN M10 CLM-1-TN CLM-10-FN M12 CLM-9-TN CLM-12-FN M12 CLM-2-TN CLM-12-FN M12 CLM-3-TN CLM-12-FN M16 CLM-10-TN CLM-16-FN M16 CLM-4-TN CLM-16-FN CLM-5-TN M20 CLM-6-TN CLM-20-FN

CLM-10-CN CL-1-TNH CLM-10-CN CLM-12-CN CLM-12-CN CLM-12-CN CLM-16-CN

CL-1-TNH CL-2-TNH CL-2-TNH CL-2-TNH CL-3-TNH

CLM-16-CN CL-3-TNH CLM-20-CN CL-4-TNH

T-SLOT CLEANERS MILD STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

This handy tool is ideal for cleaning chips and debris out of machine-table T slots. Much safer than blowing chips out with air. Made of heat treated steel, a full .109" thick. Use for any T slot 3/8" (10mm) and above. One end is sized for smaller T slots, while the other end is sized for larger T slots.

! W E N PART NO. CL-1-TSCL

OVERALL LENGTH 6

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

THICKNESS .109

Page 193 (Rev. 7-04)

ROTARY T NUTS ALLOY STEEL, RC 40-45, BLACK OXIDE FINISH

L ONA I T I ADD ES NOW LE! SIZ AILAB AV

+.000 -.010

+.000 -.020

A THREAD

60°

F C Rotary T Nuts can be inserted into the top of a T slot, unlike normal T Nuts, which must be inserted at the end of the slot. This allows adding T Nuts and Studs anywhere for a new setup, without tearing down any existing setups. Make sure that the area where the Rotary T Nut will be inserted is clear of debris, to allow the T nut to rotate a full 60 degrees. Same safety-stop thread feature as standard T Nuts.

USA TABLE SLOT A B PART NO. SIZE 3/8-16 .495 CL-0-RTN 1/2 CL-9-RTN 9/16 or 14mm 1/2-13 .550 CL-2-RTN 5/8 or 16mm 1/2-13 .620 1/2-13 CL-3-RTN .682 11/16 or 18mm 5/8-11 CL-10-RTN 5/8-11 .745 CL-4-RTN 3/4 3/4-10 .995 CL-7-RTN 1

C 7/8 7/8 1

F E 1/2 9/32 5/8 11/32 5/8 11/32

1-1/8 3/4

7/16

1-1/4 3/4 15/32 1-5/8 1 5/8

ROTARY T NUT AND STUD SETS SEE PAGES 178, 189, AND 193 FOR MATERIAL SPECIFICATIONS

L ONA I T I ADD ES NOW LE! SIZ AILAB AV

38-piece set includes a complete range of stud lengths with matching T nuts, flange nuts, and coupling nuts — all mounted in a handy wooden holder. Set includes: (4) Studs of each length 3", 4", 5", 6", 7" and 8" (6) Rotary T Nuts (6) Flange Nuts (4) Coupling Nuts (1) Handy Holder

ROTARY T NUT & STUD SETS (USA) TABLE SLOT SIZE 1/2 9/16 or 14 5/8 or 16

STUDS PART NO. (24) CL-2-RTNS 3/8-16 CL-4-RTNS 1/2-13 CL-5-RTNS 1/2-13 CL-6-RTNS 11/16 or 18 1/2-13 CL-7-RTNS 5/8-11 CL-8-RTNS 3/4 5/8-11 CL-12-RTNS 1 3/4-10

ROTARY T NUTS (6) CL-0-RTN CL-9-RTN CL-2-RTN CL-3-RTN CL-10-RTN CL-4-RTN CL-7-RTN

FLANGE NUTS (6) CL-2-FN CL-3-FN CL-3-FN CL-3-FN CL-4-FN CL-4-FN CL-5-FN

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

COUPLING NUTS (4) CL-1-CN CL-2-CN CL-2-CN CL-2-CN CL-3-CN CL-3-CN CL-4-CN

HOLDER (1) CL-1-TNH CL-2-TNH CL-2-TNH CL-2-TNH CL-3-TNH CL-3-TNH CL-4-TNH

Page 194 (Rev. 8-00)

CLAMPING KITS SEE PAGES 178, 187 AND 189 & 191 FOR MATERIAL SPECIFICATIONS

STUD STEP CLAMP

FLANGE NUT

STEP BLOCK

“T” NUT

WORKPIECE TABLE OF MACHINE

Standard Blocks Metal Holder

Economical Clamping Kit with a wide assortment of Step Clamps and Blocks. Fully machined from top-grade steel. Available with standard Step Blocks in a metal holder (for wall or machine mounting), or with wider high-rise blocks in a wooden holder.

Each Kit Contains: (24) Studs (6) T-Slot Nuts (6) Flange Nuts (4) Coupling Nuts (6) Step Blocks (6) Step Clamps

High-Rise Blocks Wooden Holder

HIGH-RISE BLOCKS (USA)

STANDARD BLOCKS (USA) STUD PART NO. SIZE CL-1-CK CL-20-CK CL-2-CK 3/8-16 CL-3-CK CL-24-CK CL-4-CK CL-5-CK 1/2-13 CL-6-CK CL-25-CK CL-7-CK CL-8-CK 5/8-11 CL-21-CK CL-9-CK

TABLE SLOT SIZE 7/16 12mm 1/2 9/16 or 14mm 5/8 or 16mm 9/16 or 14mm 5/8 or 16mm 11/16 or 18mm 3/4 11/16 or 18mm 3/4 20mm 13/16

T-NUT & STUD SET (1) CL-1-TNS CL-14-TNS CL-2-TNS CL-3-TNS CL-17-TNS CL-4-TNS CL-5-TNS CL-6-TNS CL-18-TNS CL-7-TNS CL-8-TNS CL-15-TNS CL-9-TNS

STEP STEP BLOCK PAIRS CLAMPS HOLDER (1) (2) EACH (2) EACH CL-32-STC CL-34-STC CL-36-STC

CL-10-BS CL-20-BS CL-1-CKMH CL-30-BS

CL-42-STC CL-44-STC CL-46-STC

CL-10-BS CL-20-BS CL-30-BS

CL-52-STC CL-54-STC CL-56-STC

CL-10-BS CL-20-BS CL-30-BS

CL-2-CKMH

CL-3-CKMH

CL-10-BS CL-20-BS CL-30-BS CL-10-BS CL-20-BS CL-30-BS CL-10-BS CL-20-BS CL-30-BS

T-NUT & STUD SET (1) CL-4-TNS CL-5-TNS CL-6-TNS CL-18-TNS CL-7-TNS CL-8-TNS CL-15-TNS CL-9-TNS CL-10-TNS CL-16-TNS CL-11-TNS CL-12-TNS CL-13-TNS

STEP STEP BLOCK PAIRS HOLDER CLAMPS (1) (2) EACH (2) EACH CL-42-STC CL-44-STC CL-46-STC

CL-40-BS CL-50-BS CL-60-BS

CL-4-CKH

CL-52-STC CL-54-STC CL-56-STC

CL-40-BS CL-50-BS CL-60-BS

CL-5-CKH

CL-64-STC CL-66-STC CL-68-STC

CL-40-BS CL-50-BS CL-60-BS

CL-6-CKH

HIGH-RISE BLOCKS (METRIC)

STANDARD BLOCKS (METRIC) 12mm CLM-1-CK CLM-1-TNS CL-32-STC 1/2 CLM-2-CK M10 CLM-2-TNS CL-34-STC 9/16 or 14mm CLM-3-TNS CL-36-STC CLM-3-CK 9/16 or 14mm CLM-4-TNS CL-42-STC CLM-4-CK CLM-5-CK M12 5/8 or 16mm CLM-5-TNS CL-44-STC 11/16 or 18mm CLM-6-TNS CL-46-STC CLM-6-CK 11/16 or 18mm CLM-7-TNS CL-52-STC CLM-7-CK 20mm CLM-8-CK M16 CLM-8-TNS CL-54-STC 13/16 CLM-9-CK CLM-9-TNS CL-56-STC

PART NO. CL-10-CK CL-11-CK CL-12-CK CL-26-CK CL-13-CK CL-14-CK CL-22-CK CL-15-CK CL-16-CK CL-23-CK CL-17-CK CL-18-CK CL-19-CK

TABLE SLOT SIZE 9/16 or 14mm 5/8 or 16mm 1/2-13 11/16 or 18mm 3/4 11/16 or 18mm 3/4 5/8-11 20mm 13/16 13/16 22mm 7/8 3/4-10 1 1-1/16

STUD SIZE

CL-1-CKMH

CL-2-CKMH CL-3-CKMH

9/16 or 14mm CLM-10-CK CLM-11-CK M12 5/8 or 16mm 11/16 or 18mm CLM-12-CK 11/16 or 18mm CLM-13-CK 20mm CLM-14-CK M16 13/16 CLM-15-CK CLM-17-CK M20

22mm

CLM-4-TNS CLM-5-TNS CLM-6-TNS CLM-7-TNS CLM-8-TNS CLM-9-TNS

CL-42-STC CL-44-STC CL-46-STC CL-52-STC CL-54-STC CL-56-STC CL-64-STC CLM-11-TNS CL-66-STC CL-68-STC

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

CL-40-BS CL-50-BS CL-60-BS CL-40-BS CL-50-BS CL-60-BS CL-40-BS CL-50-BS CL-60-BS

CL-4-CKH CL-5-CKH CL-6-CKH

Page 195 (Rev. 5-05)

DELUXE CLAMPING KITS 12

New, improved clamping kit with a wider assortment of clamps. Safer and less cumbersome than sets using step blocks and clamps.

Set includes clamp strap assemblies, forged adjustable clamps and serrated adjustable clamps (edge clamps). Choice of steel pad or Delrin速 pad on clamp strap assemblies. Sturdy steel rack conveniently stores all components. 1/2

(6) 4" Clamp Straps

(6) 6" Clamp Straps

(6) Stud Leveling Feet

(6) T Nuts

(4) Forged Adjustable Clamps

(6) Coupling Nuts

(6) Serrated Adjustable Clamps

(6) Spherical Nuts & Washers

(6) 4" Studs

(6) Jam Nuts

(6) Flat Washers

Forged Adjustable Clamps Clamp Strap Assemblies PART NO. PART NO. STEEL PADS CL-4-DCK CL-5-DCK CL-6-DCK CL-7-DCK

TABLE CLAMP SLOT STUD STRAPS DELRIN速 PADS SIZE SIZE (6 EACH) CL-4-DCKN 9/16 or 14mm CL-5-DCKN 5/8 or 16mm CL-71-CS 1/2-13 CL-6-DCKN 11/16 or 18mm CL-75-CS CL-7-DCKN 3/4

CL-8-FAC

CL-60-SAC

T NUTS (6) CL-9-TN CL-1/2-13x4.00 CL-8-SLF-BO CL-2-TN or CL-1/2-13x6.00 CL-3-TN CL-1/2-13x8.00 CL-8-SLFN CL-17-TN STUDS (6 EACH)

(6) 6" Studs

(12) Springs

(6) 8" Studs

(6) Socket Head Cap Screws

Serrated Adjustable Clamps (Edge Clamps)

USA FORGED SERR. ADJ. CLPS. ADJ. CLPS. (4) (6)

5-1/4

LEVELING FEET (6)

NUTS & SOCKET-HEAD WASHERS SPRINGS CAP SCREWS (6 EACH) (12) (6) CL-2-CN CL-3-SNW CL-9-SPG CL-1/2-13x1.50-SHCS CL-8-JN CL-2-FW

METRIC CLM-4-DCK CLM-5-DCK CLM-6-DCK

9/16 or 14mm CLM-71-CS 5/8 or 16mm M12 CLM-75-CS 11/16 or 18mm

CL-8-FAC

CL-60-SAC

CLM-12x95 CLM-12x150 CLM-12x200

CLM-12SLF-BO

CLM-9-TN CLM-2-TN CLM-3-TN

CLM-12-CN CLM-12-SNW CL-9-SPG CLM-12-JN CL-2-FW

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

CLM-12x40-SHCS

Page 196 (Rev. 7-05)

TINY VIS E EDGE CLAMPS ™

BODY: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH THRUST WASHER: 1144 STEEL, BLACK OXIDE FINISH

An important new clamping development! These patented new mini edge clamps, ideal for fixturing small parts, offer major functional and durability improvements over earlier designs:

Serrated Jaw and Smooth Jaw (Reversible)

1. Clamping force is applied by positive screw action with the easy turn of a hex wrench (not with an unreliable eccentric cam, as used in other designs). A highstrength flat-head socket screw engages a mating offset countersink to exert strong clamping force. 2. Only TINY VISE mini edge clamps truly exert downthrust force on the workpiece , to prevent it from lifting. A thrust washer underneath the clamp engages a second mating countersink to provide downward action. TINY VISE Edge Clamps are available in a wide range of sizes, from a miniature #8-32 thread size, up to a powerful 1"-8 thread size with 2,500 lbs clamping force. Spare thrust washers are available as accessories (e.g. CL-2-TV-WASH). Patent No. 5,624,106

SERRATED JAW

SMOOTH JAW

Unlike other mini edge clamps, TINY VISE Edge Clamps truly exert downward force on the workpiece , to prevent it from lifting. The serrated face provides maximum gripping, while the smooth face (turn 180°) avoids marring finished parts.

SERRATED JAW AND SMOOTH JAW (REVERSIBLE) E

RECOMMENDED

APPROX. HORIZONTAL

CLAMPING FORCE AT F MAXIMUM TORQUE PART NO. A B C D MIN MAX DIA G H J K TRAVEL (FT-LBS)* RECOMMENDED TORQUE (LBS)* CL-2-TV #8-32 .250 .319 .382 .175 .205 .235 .335 5/8 3/32 9/16 .470 .060 .07 60 CL-3-TV #10-32 .312 .390 .459 .208 .242 .274 .390 3/4 1/8 5/8 .550 .066 .10 75 CL-4-TV 1/4-20 .375 .467 .552 .280 .320 .360 .510 7/8 5/32 7/8 .720 .080 .25 130 CL-5-TV 5/16-18 .438 .550 .652 .338 .386 .434 .640 1 3/16 1 .870 .096 .55 240 CL-6-TV 3/8-16 .500 .627 .746 .390 .445 .500 .742 1-1/8 7/32 1-1/8 1.000 .110 1.0 370 CL-8-TV 1/2-13 .562 .702 .833 .474 .534 .594 .897 1-3/8 5/16 1-1/4 1.187 .120 3.0 800 CL-10-TV 5/8-11 .750 .901 1.039 .620 .685 .750 1.148 1-5/8 3/8 1-5/8 1.500 .130 5.5 1,200 CL-12-TV 3/4-10 .875 1.059 1.234 .740 .820 .900 1.394 2 1/2 2 1.800 .160 10 1,800 CL-16-TV 1"-8 1.125 1.355 1.573 .988 1.088 1.188 1.890 2-1/2 5/8 2-1/2 2.375 .200 18 2,500 *Recommended torque and clamping force are at 1/3 of yield strength, leaving 2/3 of holding capacity to resist external cutting forces, etc. MID RANGE

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 197 (Rev. 7-05)

TINY VIS E EDGE CLAMPS โ ข

Spring Stop Button

TINY VISE

ROUND PIN Roll Pin

SPACER

Workpiece

REST BUTTON Roll Pin

For a small amount of cutting-tool clearance, TINY VISE Edge Clamps can be mounted with a spacer underneath, using a longer screw. For greater clearance, clamps should be mounted into a tapped riser block fastened to the plate, to reduce bending stress on the screw.

Roll pins can be installed to keep the Tiny Vise perfectly aligned for workpiece loading (especially helpful on horizontal machining centers).

MAXIMUM TRAVEL

NEW! The new V-jaw version of our popular Tiny Vise is ideal for clamping round workpieces. The 90ยบ V jaw can also be used to clamp a rectangular workpiece from two directions with a single clamp at its corner.

MIDRANGE DISTANCE= M+(.7071 x DIA)

H HEX SOCKET E MIN

FULLY RETRACTED

F DIA E MAX FULLY EXTENDED

B G

Multiple workpieces can be clamped extremely close together.

A rectangular workpiece can be clamped from two directions with a single clamp.

A THREAD FLAT-HEAD SOCKET SCREW

V JAW RECOM- APPROX. HORIZONTAL

E MAXIMUM MENDED CLAMPING FORCE MID F WORKPIECE MAXIMUM TORQUE AT RECOMMENDED PART NO. A B C D MIN RANGE MAX DIA G H J K M DIAMETER TRAVEL (FT-LBS)* TORQUE (LBS)* CL-2-TVR #8-32 .250 .319 .382 .292 .322 .352 .335 5/8 3/32 .625 .620 .212 3/8 .060 .07 60 CL-3-TVR #10-32 .312 .390 .459 .375 .407 .940 .390 3/4 1/8 .750 .750 .253 1/2 .066 .10 75 CL-4-TVR 1/4-20 .375 .467 .552 .453 .493 .533 .510 7/8 5/32 .875 .900 .315 19/32 .080 .25 130 CL-5-TVR 5/16-18 .438 .550 .652 .562 .611 .660 .640 1 3/16 1.000 1.100 .410 11/16 .096 .55 240 CL-6-TVR 3/8-16 .500 .627 .746 .687 .742 .797 .742 1-1/8 7/32 1.250 1.300 .454 15/16 .110 1.0 370 CL-8-TVR 1/2-13 .562 .702 .833 .812 .872 .932 .897 1-3/8 5/16 1.500 1.530 .557 1-1/32 .120 3.0 800 CL-10-TVR 5/8-11 .750 .901 1.039 1.124 1.157 1.254 1.148 1-5/8 3/8 2.000 2.100 .692 1-9/16 .130 5.5 1,200 CL-12-TVR 3/4-10 .875 1.059 1.2341.344 1.424 1.504 1.394 2 1/2 2.500 2.500 .848 1-13/16 .160 10 1,800 CL-16-TVR 1"-8 1.125 1.355 1.5731.687 1.782 1.887 1.890 2-1/2 5/8 3.000 3.200 1.137 2-1/16 .200 18 2,500 *Recommended torque and clamping force are at 1/3 of yield strength, leaving 2/3 of holding capacity to resist external cutting forces, etc.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 198 (Rev. 7-05)

TINY VIS E DOUBLE EDGE CLAMPS â&#x201E;˘

BODY: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH; SPRINGS: 302 STAINLESS STEEL THRUST WASHERS: 1144 STEEL, BLACK OXIDE FINISH; GUIDE PINS: 17-4PH STAINLESS STEEL.

These Double Edge Clamps allow clamping two workpieces at the same time with the same great benefits of the standard TINY VISE (page 196). These double clamps offer the following major improvements over earlier designs:

LSO LE A NOWVAILABTRIC! A ME IN

1. Clamping force is applied to two workpieces simultaneously by positive screw action with the turn of a hex wrench. A high-strength cap screw and thrust washer engage a mating offset countersink to exert strong clamping force.

Two Serrated Jaws

MAXIMUM TRAVEL

2. Only TINY VISE mini edge clamps truly exert downthrust force on the workpiece , to prevent it from lifting. A thrust washer underneath the clamp engages a second mating countersink to provide downward action.

H HEX SOCKET E MIN

3. Only TINY VISE Double Edge Clamps compensate for size variation when clamping two workpieces. Thrust washers have ID clearance to enable them to float horizontally, allowing both clamping jaws to contact the part simultaneously. This ensures that both parts are securely clamped with equal force.

Two Smooth Jaws

K (REF)

MAXIMUM TRAVEL

E MAX L

FULLY RETRACTED

D C

TINY VISE Double Edge Clamps are available in several sizes, from 5/16-18 up to a powerful 1"-8 thread size with 12,000 lbs clamping force (M8 to M24 in metric). Note: these clamps should always be used to hold two workpieces, not just one; otherwise, recommended torque and clamping force will be significantly reduced. Spare thrust washers are available as accessories (e.g. CL-50-TV-WASH, two required per clamp). Patent No. 5,624,106.

F DIA

E MAX

E MAX FULLY EXTENDED

Thrust washers have ID clearance to enable them to float horizontally, allowing both clamping jaws to contact their workpiece simultaneously even if parts are slightly different in size. This ensures that both parts are securely clamped with equal force.

A THREAD SOCKET-HEAD CAP SCREW

USA ALLOWABLE

PART NO. SERRATED JAWS CL-50-TV CL-60-TV CL-80-TV CL-100-TV CL-160-TV

PART NO. SMOOTH JAWS CL-55-TV CL-65-TV CL-85-TV CL-105-TV CL-165-TV

CLM-50-TV CLM-60-TV CLM-80-TV CLM-100-TV CLM-160-TV

CLM-55-TV CLM-65-TV CLM-85-TV CLM-105-TV CLM-160-TV

MAXIMUM

RECOM- APPROX. HORIZONTAL CLAMPING FORCE AT RECOMMENDED TORQUE (LBS)*

E WORKPIECE TRAVEL MENDED MID F SIZE (WITH NO SIZE TORQUE A B C D MIN RANGE MAX DIA G H J K L DIFFERENTIAL DIFFERENTIAL) (FT-LBS)* 5/16-18 .375 .486 .597 .422 .470 .518 .625 1 3/16 1 .844 .16 .048 .096 7 3/8-16 .438 .570 .684 .520 .572 .625 .750 1-1/8 7/32 1-1/4 1.250 .19 .052 .105 12 1/2-13 .500 .635 .770 .641 .698 .755 .875 1-1/4 5/16 1-3/8 1.282 .26 .060 .114 15 5/8-11 .625 .765 .905 .690 .750 .810 1.125 1-1/2 3/8 1-1/2 1.380 .32 .078 .120 36 1"-8 1.000 1.159 1.318 1.109 1.178 1.247 1.875 2-1/4 3/4 2-1/2 2.218 1.00 .094 .138 175

1,500 1,800 2,100 4,000 12,000

METRIC M8 .375 .486 .597 .422 M10 .438 .570 .684 .520 M12 .500 .635 .770 .641 M16 .625 .765 .905 .690 M24 1.000 1.159 1.318 1.109

.470 .572 .698 .750 1.178

.518 .625 1 5mm 1 .844 .16 .625 .750 1-1/8 6mm 1-1/4 1.250 .19 .755 .875 1-1/4 8mm 1-3/8 1.282 .26 .810 1.125 1-1/2 10mm 1-1/2 1.380 .32 1.247 1.875 2-1/4 19mm 2-1/2 2.218 1.00

.048 .052 .060 .078 .094

.096 .105 .114 .120 .138

7 12 15 36 175

1,500 1,800 2,100 4,000 12,000

*Recommended torque and clamping force are at 1/3 of yield strength, leaving 2/3 of holding capacity to resist external cutting forces, etc.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 199 (Rev. 7-05)

โ ข

TINY VIS E DOUBLE EDGE CLAMPS NEW! K

MAXIMUM TRAVEL

MIDRANGE DISTANCE= M+(.7071 x DIA)

H HEX SOCKET

Two V Jaws

The new V-jaw version of our popular Tiny Vise is ideal for clamping round workpieces. The 90ยบ V jaw can also be used to clamp a rectangular workpiece from two directions with a single clamp at its corner. Double edge clamps allow clamping two workpieces at the same time with equal force.

FULLY RETRACTED D C F DIA

FULLY EXTENDED

B G

A THREAD SOCKET-HEAD CAP SCREW

Multiple workpieces can be clamped extremely close together.

V JAWS (USA)

PART NO. CL-50-TVR CL-60-TVR CL-80-TVR CL-100-TVR CL-160-TVR

A 5/16-18 3/8-16 1/2-13 5/8-11 1"-8

B C D .375 .486 .597 .438 .570 .684 .500 .635 .770 .625 .765 .905 1.000 1.159 1.318

F DIA .625 .750 .875 1.125 1.875

G H 1 3/16 1-1/8 7/32 1-1/4 5/16 1-1/2 3/8 2-1/4 3/4

J 1-1/4 1-3/8 1-1/2 1-3/4 2-1/2

K L M 1.308 .16 .421 1.478 .19 .482 1.706 .26 .569 2.104 .32 .706 3.350 1.00 1.119

ALLOWABLE MAXIMUM WORKPIECE MAX. TRAVEL WORKPIECE SIZE DIFFER- (WITH NO SIZE DIAMETER ENTIAL DIFFERENTIAL)

3/4 27/32 15/16 1-1/8 1-3/4

.048 .052 .060 .078 .094

.096 .105 .114 .120 .138

RECOM- APPROX. HORIZONTAL MENDED CLAMPING FORCE TORQUE AT RECOMMENDED (FT-LBS)* TORQUE (LBS)*

7 12 15 36 175

1,500 1,800 2,100 4,000 12,000

V JAWS (METRIC) CLM-50-TVR M8 .375 .486 .597 .625 1 3/16 1-1/4 1.308 .16 4.21 3/4 .048 .096 7 1,500 CLM-60-TVR M10 .438 .570 .684 .750 1-1/8 7/32 1-3/8 1.478 .19 .482 27/32 .052 .105 12 1,800 CLM-80-TVR M12 .500 .635 .770 .875 1-1/4 5/16 1-1/2 1.706 .26 .569 15/16 .060 .114 15 2,100 CLM-100-TVR M16 .625 .765 .905 1.125 1-1/2 3/8 1-3/4 2.104 .32 .706 1-1/8 .078 .120 36 4,000 CLM-160-TVR M24 1.000 1.159 1.318 1.875 2-1/4 3/4 2-1/2 3.350 1.00 1.119 1-3/4 .094 .138 175 12,000 *Recommended torque and clamping force are at 1/3 of yield strength, leaving 2/3 of holding capacity to resist external cutting forces, etc.

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 200 (Rev. 7-02)

SERRATED EDGE CLAMPS SAC P E R

BODY AND NOSE: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH CLAMPING SCREW: 4140 STEEL, HEAT TREATED RC 43-45, BLACK OXIDE FINISH NOSE COVER: ALUMINUM M HEX SOCKET Q

15SAC

IBP

Serrated Adjustable Edge Clamp (High Nose)

High Nose

A SLOT FOR SOCKET HEAD CAP SCREW

1/16 1/2

45° J

Removable aluminum nose cover, furnished on high-nose version

IBP

1°

- K RANGE

+ K RANGE

M HEX SOCKET Q

G C

IBP A SLOT FOR SOCKET HEAD CAP SCREW

Low Nose This low-profile clamp is ideal for gripping the side of a workpiece to keep the top clear for machining. Clamps both forward and down simultaneously, by tightening the socket-head screw in the sliding nose with a hex wrench. V-groove in nose is excellent for clamping round parts or corners. Choice of five sizes, each available in several slot lengths. Slot is tapered to prevent the clamp from backing off under heavy forces. Use two mounting screws on longer clamps.

IBP P

H L

Low-nose version is ideal for thin parts, with its extra machining clearance.

1°

ADJUSTABLE — HIGH NOSE

High Nose

Low Nose

- K RANGE

+ K RANGE

High-nose version is best for most applications. Gripping high up on the workpiece, close to the machining plane, provides maximum clamping rigidity. A removable aluminum nose cover is furnished for clamping soft or machined parts without damage.

45°

PART NO. CL-1-SAC CL-5-SAC CL-15-SAC CL-25-SAC CL-35-SAC CL-45-SAC CL-55-SAC CL-65-SAC CL-75-SAC CL-95-SAC CL-105-SAC CL-125-SAC

MOUNTING SCREW SIZE 5/16-18 or M8 3/8-16 or M10

1/2-13 or M12 5/8-11 or M16 3/4-10 or M20

B A C 2 5/8 1 3 3 4-1/4 5/8 1-1/4 5 4 5-1/2 7/8 1-1/2 7-1/8 5-1/2 1-1/4 1-3/4 8-1/4 5-1/2 1-1/4 1-3/4 8-1/4

G 1/4 1-1/4 13/16 1-7/16 2-1/8 1-1/4 2-1/8 3 1-3/8 4 1-3/8 4

9/32 7/16 1/4 3/8 7/16 1/4 1/2 5/8 5/16 5/8 3/4 5/16 3/4 3/4 5/16

L 1-1/2 2-1/2 2-3/8 3-5/8 4-3/8 3-3/16 4-11/16 6-5/16 4-1/2 7-1/4 4-1/2 7-1/4

5/32 —

—

1-3/8

3/16 —

—

1/4 — 5/16 — 5/16 —

1-11/16 2-1/16 1-7/8 2-1/4 — 2-1/2 2-9/16 3-9/32 — 3 3-9/32 — 3

ADJUSTABLE — LOW NOSE CL-0-SAC CL-00-SAC CL-10-SAC CL-20-SAC CL-30-SAC CL-40-SAC CL-50-SAC CL-60-SAC CL-70-SAC CL-90-SAC CL-100-SAC CL-120-SAC

5/16-18 or M8 3/8-16 or M10

1/2-13 or M12 5/8-11 or M16 3/4-10 or M20

2 1 5/8 3 3 4-1/4 5/8 1-1/4 5 4 5-1/2 7/8 1-1/2 7-1/8 5-1/2 1-1/4 1-3/4 8-1/4 5-1/2 1-1/4 1-3/4 8-1/4

1/4 1-1/4 13/16 1-7/16 2-1/8 1-1/4 2-1/8 3 1-3/8 4 1-3/8 4

9/32 —

1/4

3/8

—

1/4

1/2

—

5/16

5/8

—

5/16

3/4

—

5/16

1-1/2 5/32 1/8 2-1/2 2-3/8 3-5/8 3/16 1/4 4-3/8 3-3/16 4-11/16 1/4 1/4 6-5/16 4-1/2 5/16 5/16 7-1/4 4-1/2 5/16 5/16 7-1/4

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

1/8 1/4

1/4 3/8 3/8

1-3/8 1-11/16 2-1/16 1-7/8 2-1/4 2-1/2 2-9/16 3-9/32 3 3-9/32 3

Page 201 (Rev. 7-02)

SERRATED EDGE CLAMPS BODY AND NOSE: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH CLAMPING SCREW: 4140 STEEL, HEAT TREATED RC 43-45, BLACK OXIDE FINISH NOSE COVER: ALUMINUM

M HEX SOCKET

Serrated Fixed Edge Clamp (High Nose)

(2) MOUNTING HOLES FOR FLAT-HEAD SOCKET SCREWS

D E

C REMOVABLE NOSE COVER

IBP

1/16

1/2

Serrated Fixed Edge Clamp (Low Nose)

F 45

B L - K RANGE

+ K RANGE

IBP

High Nose Serrated Fixed Edge Clamps mount in a fixed position, rather than having a slot for adjustment. This makes the clamps more compact and ensures that they are mounted in the correct location without requiring adjustment. The fixed version is usually better for permanent fixtures, while the adjustable version is better for machine-table mounting. The Flat-Head Socket Screws used for mounting absolutely hold proper location (order separately). Choice of three clamp sizes, with either a high nose or low nose.

M HEX SOCKET Q

(2) MOUNTING HOLES FOR FLAT-HEAD SOCKET SCREWS

D E

C IBP

High Nose

F 45

N B P

Low Nose

+ K RANGE

L - K RANGE

IBP

Low Nose FIXED POSITION — HIGH NOSE PART NO. CL-5-SFC CL-45-SFC CL-75-SFC

MOUNTING SCREW A B C SIZE 1 5/16-18 1-13/16 5/8 2-11/16 7/8 1-1/2 1/2-13 3-1/2 1-1/4 1-3/4 5/8-11

FLAT-HEAD SOCKET SCREWS (2 REQ’D) D E F J K L M N P Q ORDER SEPARATELY 1 1-3/4 11/16 7/16 1/4 1-5/16 5/32 — — 1-15/32 CL-5/16-18x1.00-FHSS 2 3 1 5/8 5/16 1-7/8 1/4 — — 2-3/16 CL-1/2-13x1.38-FHSS 2 3-1/4 1-1/4 3/4 5/16 2-1/2 5/16 — — 2-7/8 CL-5/8-11x2.00-FHSS

FIXED POSITION — LOW NOSE CL-0-SFC CL-40-SFC CL-70-SFC

5/16-18 1/2-13 5/8-11

1-13/16 5/8 1 1 1-3/4 11/16 7/16 1/4 1-5/16 5/32 1/8 1/8 1-15/32 2-11/16 7/8 1-1/2 2 3 1 5/8 5/16 1-7/8 1/4 1/4 1/4 2-3/16 3-1/2 1-1/4 1-3/4 2 3-1/4 1-1/4 3/4 5/16 2-1/2 5/16 5/16 3/8 2-7/8

CL-5/16-18x1.00-FHSS CL-1/2-13x1.38-FHSS CL-5/8-11x2.00-FHSS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 202 (Rev. 7-02)

SERRATED EDGE CLAMPS BODY AND NOSE: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH CLAMPING SCREW: 4140 STEEL, HEAT TREATED RC 43-45, BLACK OXIDE FINISH NOSE COVER: ALUMINUM

(2) MOUNTING HOLES FOR FLAT-HEAD SOCKET SCREWS Q

M HEX SOCKET Q

Serrated Double Edge Clamp (High Nose)

C D E

C REMOVABLE NOSE COVER

IBP

F A

1/16

Serrated Double Edge Clamp (Low Nose)

1/16

1/2 J

B L - K RANGE

+ K RANGE

IBP

High Nose M HEX SOCKET Q

Serrated Double Edge Clamps allow holding two workpieces with a single clamp. Double Edge Clamps mount in a fixed position between the two workpieces, then clamp outward with each nose operating independently. The Flat-Head Socket Screws used for mounting absolutely hold proper location (order separately). Choice of three clamp sizes, with either a high nose or low nose.

(2) MOUNTING HOLES FOR FLAT-HEAD SOCKET SCREWS Q

C D E

C IBP

High Nose

F A 45

N B

Low Nose

P + K RANGE

L - K RANGE

IBP

Low Nose

DOUBLE — HIGH NOSE PART NO. CL-5-SDC CL-45-SDC CL-75-SDC

MOUNTING SCREW A B C SIZE 2-15/16 5/8 1 5/16-18 4-3/8 7/8 1-1/2 1/2-13 5-3/4 1-1/4 1-3/4 5/8-11

FLAT-HEAD SOCKET SCREWS (2 REQ’D) D E F J K L M N P Q ORDER SEPARATELY 1 1-3/4 11/16 7/16 1/4 2 5/32 — — 1-15/32 CL-5/16-18x1.00-FHSS 2 3 1 5/8 5/16 2-3/4 1/4 — — 2-3/16 CL-1/2-13x1.38-FHSS 2 3-1/4 1-1/4 3/4 5/16 3-3/4 5/16 — — 2-7/8 CL-5/8-11x2.00-FHSS

DOUBLE — LOW NOSE CL-0-SDC CL-40-SDC CL-70-SDC

5/16-18 1/2-13 5/8-11

2-15/16 5/8 1 1 1-3/4 11/16 7/16 1/4 2 5/32 1/8 1/8 1-15/32 4-3/8 7/8 1-1/2 2 3 1 5/8 5/16 2-3/4 1/4 1/4 1/4 2-3/16 5-3/4 1-1/4 1-3/4 2 3-1/4 1-1/4 3/4 5/16 3-3/4 5/16 5/16 3/8 2-7/8

CL-5/16-18x1.00-FHSS CL-1/2-13x1.38-FHSS CL-5/8-11x2.00-FHSS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 203 (Rev. 7-05)

CAM EDGE CLAMPS ALSO W O N ABLE L I A ! AV TRIC E M IN

BODY: STEEL, WEAR SURFACES HARDENED, BLACK OXIDE FINISH BALL HANDLE: BLACK PHENOLIC PLASTIC

Fixed Base

Slotted Base Pivoting-nose edge clamp operated by a cam handle for fast action. Smooth spiral cam locks positively anywhere within its 180° throw. Choice of two sizes. Available with either a standard base for fixed-position mounting, or a slotted base for adjustable mounting. Choice of clockwise or counterclockwise handle rotation to clamp.

Slotted Base

Nose pivots to exert clamping force forward and downward at the same time.

FIXED BASE (USA) PART NO. CLOCKWISE CCW K CLAMPING CLAMPING A B C D E F G H J MIN MAX L M CL-MF25-5601 CL-MF25-5602 5/16-18 5/32 1-1/8 3-15/16 1-5/8 7/16 15/16 1-3/4 11/16 7/8 1 1-1/4 3/4 CL-MF40-5601 CL-MF40-5602 1/2-13 7/32 1-9/16 5-3/4 2-1/2 5/8 1-1/2 2-3/4 15/16 1-5/16 1-1/2 1-7/8 1

N — —

P — —

— —

MAX CLAMPING FORCE (LBS) HORIZONTAL VERTICAL

750 1500

50 100

— —

750 1500

50 100

CL-MF25-5611 CL-MF25-5612 5/16-18 5/32 1-1/8 3-15/16 1-5/8 7/16 15/16 3-1/2 — 7/8 1 1-1/4 3/4 2 1 CL-MF40-5611 CL-MF40-5612 1/2-13 7/32 1-9/16 5-3/4 2-1/2 5/8 1-1/2 6 — 1-5/16 1-1/2 1-7/8 1 2-15/16 2

750 1500

50 100

FIXED BASE (METRIC) CL-MF08-5601 CL-MF08-5602 CL-MF12-5601 CL-MF12-5602

M8 M12

5/32 1-1/8 3-15/16 1-5/8 7/16 15/16 1-3/4 .31 7/8 1 1-1/4 3/4 7/32 1-9/16 5-3/4 2-1/2 5/8 1-1/2 2-3/4 .47 1-5/16 1-1/2 1-7/8 1

SLOTTED BASE

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 204 (Rev. 8-98)

HOOK CLAMPS CLAMP BODY: 12L14 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

Standard Arm Socket Head

Extremely compact swing clamp that mounts in a reamed hole. Ideal in tight spaces and where high clamping forces are required. Choice of socket head (counterbored) or hex-head type.

Compact assembly is easy to install in tight spaces. Socket-head type shown above offers a very low profile.

CA P E

CAC P E

1CA

1CAC

Standard Arm Hex Head

STANDARD ARM, SOCKET HEAD (USA) PART NO. CL-1-CAC CL-2-CAC CL-3-CAC

THREAD DIA A 5/16-18 .67 1/2-13 .92 5/8-11 1.30

B .08 .12 .18

D CLAMPING F H C RANGE E DIA DIA J K L .93 .25 .55 .625 .80 .40 .69 1.63 .50 .63 .875 1.08 .50 1.13 .12 1.83 .70 .90 1.125 1.38 .75 1.25

M —

STANDARD ARM, SOCKET HEAD (METRIC) CLM-1-CAC CLM-2-CAC CLM-3-CAC

M8 M12 M16

.67 .08 .92 .12 1.30 .18

CL-1-CA CL-2-CA CL-3-CA

5/16-18 1/2-13 5/8-11

CLM-1-CA CLM-2-CA CLM-3-CA

M8 M12 M16

.93 1.63 1.83

.25 .50 .70

.55 .625 .80 .63 .875 1.08 .90 1.125 1.38

.40 .66 .50 1.28 .12 .75 1.31

—

STANDARD ARM, HEX HEAD (USA) .67 .08 .92 .12 1.30 .18

.93 1.63 1.83

.25 .50 .70

.55 .625 .80 .63 .875 1.08 .90 1.125 1.38

.40 1.14 .30 .06 .50 1.19 .48 .08 .75 1.57 .61 .09

STANDARD ARM, HEX HEAD (METRIC) Installation Hole

.67 .08 .92 .12 1.30 .18

.93 1.63 1.83

.25 .50 .70

.55 .625 .80 .40 .69 .32 .05 .63 .875 1.08 .50 1.02 .47 .07 .90 1.125 1.38 .75 1.48 .63 .08

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 205

ALSO W O N E LABL I A V ! A TRIC E M IN

(Rev. 7-05)

HOOK CLAMPS CLAMP BODY: 4135 STEEL, HEAT TREATED, BLACK OXIDE FINISH HOLDER: 1045 STEEL, BLACK OXIDE FINISH G-CAP SCREW

E A

H C K

Long Arm Socket Head

PRECISION GROUND

Tapped Long Arm Socket Head

Longer-arm Hook Clamps available with either a plain or tapped arm. The tapped-arm version accepts a wide variety of contact bolts or adjustment spindles to increase clamping range (the tapped arm is also slightly longer).

B +.0000 –.0010

Installation Hole

LONG ARM, SOCKET HEAD (USA) THREAD PART NO. DIA CL-MF25-5002 5/16-18 CL-MF40-5002 1/2-13 CL-MF50-5002 5/8-11

A 1 2 2

— — —

MAXIMUM ALLOWABLE K L M TORQUE (FT-LBS) 29/32 15/16 15/16 22 1-17/32 1-9/16 1 34 1-17/32 1-9/16 1 59

.7500 1.0000 1.2500

1-7/16 2-5/16 7/8 3/8 5/16-18x2.00 2-1/2 3-1/2 1-1/4 11/16 1/2-13x3.00 2-7/8 3-7/8 1-7/16 7/8 5/8-11x3.25

.7500 1.0000 1.2500

7/8 3/8 5/16-18x2.00 15/16 5/16-18 29/32 15/16 15/16 1-7/16 2-5/16 1 2-1/2 3-1/2 1-1/4 11/16 1/2-13x3.00 1-13/16 1/2-13 1-17/32 1-9/16 1 2-7/8 3-7/8 1-7/16 7/8 5/8-11x3.25 1-13/16 5/8-11 1-17/32 1-9/16

MAXIMUM CLAMPING FORCE (LBS) 2200 2700 3700

TAPPED LONG ARM, SOCKET HEAD (USA) CL-MF25-5013 5/16-18 1-3/16 CL-MF40-5013 1/2-13 2-3/8 CL-MF50-5014 5/8-11 2-3/8

22 34 59

2200 2700 3700

LONG ARM, SOCKET HEAD (METRIC) CL-MF08-5002 CL-MF12-5002 CL-MF16-5002

M8 M12 M16

1.18 1.97 1.97

.7087(18mm) .9843(25mm) 1.2598(32mm)

CL-MF12-5013 CL-MF16-5013

M12 M16

2.36 2.36

.9843(25mm) 1.2598(32mm)

1.46 2.68 2.95

2.28 3.62 3.98

.87 1.26 1.42

.39 .71 .87

M8x50mm M12x80mm M16x85mm

— — —

.91 1.54 1.54

— — —

.98 1.57 1.57

.79 .98 .98

22 34 59

2200 2700 3700

1.57 1.57

.98 .98

34 59

2700 3700

TAPPED LONG ARM, SOCKET HEAD (METRIC) 2.68 2.95

3.62 3.98

1.26 1.42

.71 .87

M12x80mm M16x85mm

1.81 1.81

M12 M12

1.54 1.54

Long-Arm Hook Clamp

Hook-Clamp Holder

HOOK-CLAMP HOLDERS (USA)

Riser Cylinder (See p. 40MF)

F THREAD DIA PART NO. A CL-MF25-5101 5/16-18 2-1/4 CL-MF40-5101 1/2-13 3-1/8 CL-MF40-5102 4 CL-MF50-5101 3-1/8 5/8-11 CL-MF50-5102 4

B DIA .7500

C 7/8

1.0000

1-7/16

1.2500

1-3/4

D DIA 1

E G 3 15/16 1-9/16 4-3/8 1-9/16 5-1/4 4-3/8 2 1-9/16 5-1/4

HOOK-CLAMP HOLDERS (METRIC) Hook-Clamp Holder

CL-MF08-5101 CL-MF12-5101 CL-MF16-5101

M8 M12 M16

2.17 .7087(18mm) .87(22mm) 3.15 .9843(25mm) 1.42(36mm) 3.15 1.2598(32mm) 1.81(46mm)

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

.94 1.57 1.97

2.91 4.33 4.33

.98 1.57 1.57

Page 206 (Rev. 8-98)

SWING CLAMP ASSEMBLIES ARM: NODULAR IRON PER ASTM A536 GRADE 65-45-12, ZINC PLATED CLEAR CHROMATE SEE PAGES 55, 98, AND 189 FOR OTHER MATERIAL SPECIFICATIONS ALL OTHER PARTS: MILD STEEL, BLACK OXIDE FINISH

SWA P L E R 1SWA1

Long-reach swing clamp that can be hand tightened for medium clamping force. The post-mounted version is ideal for tight spaces, with a long mounting post for increased strength. Swing arm can be turned over for more clearance underneath. Install in a reamed hole. To order with a Delrin® foot instead of steel, add “N” to the part number. Example: CL-1-SWA-1N.

Knob Handle Post Mounted

KNOB HANDLE, POST MOUNTED (USA) PART NO. CL-1-SWA-1 CL-4-SWA-1 CL-5-SWA-1 CL-2-SWA-1 CL-3-SWA-1

C D H V DIA THREAD U J F G DIA E L N W K B NOMINAL ACTUAL SIZE A S DIA DIA Q .68 5/16-18 .16 11/16 15/16 3/4 .563 .69 3/4 2.45 1/2 1-3/4 5/32 3/8 5/16-18 1-1/2 .80 9/16 2 1.18 7/8 .875 1.50 1-1/8 3.88 3/4 2-1/8 3/16 11/16 .99 1/2-13 .19 1/2-13 1 1-5/16 1-1/8 2-1/2 3 1.55 1-1/8 1.125 1.59 1-5/16 4.56 15/16 2-3/4 7/32 13/16 1.33 5/8-11 .22 1-5/16 1-3/4 1-1/2 5/8-11 4

Y .11

Z .80

.15

.67

.18

.74

KNOB HANDLE, POST MOUNTED (METRIC) CLM-1-SWA-1 CLM-4-SWA-1 CLM-5-SWA-1 CLM-2-SWA-1 CLM-3-SWA-1

M8 M12 M16

1-1/2 .80 14mm .551 .69 3/4 2.45 1/2 1-3/4 5/32 2 1.18 22mm .866 1.50 1-1/8 3.88 3/4 2-1/8 3/16 2-1/2 3 1.55 28mm 1.102 1.59 1-5/16 4.56 15/16 2-3/4 7/32 4

.39

.68 5/16-18 .16 11/16 15/16

.67

.99 1/2-13 .19

.10

.95

1-5/16 1-1/8 .14

1.01

.83 1.33 5/8-11 .22 1-5/16 1-3/4 1-1/2 .16

.66

3/4

SWA P L E R 1SWA2

Ball Handle Post Mounted

Same as above, except with a sliding ball handle for increased leverage.

BALL HANDLE, POST MOUNTED (USA) PART NO. CL-1-SWA-2 CL-4-SWA-2 CL-5-SWA-2 CL-2-SWA-2 CL-3-SWA-2

C D DIA THREAD F A B NOMINAL ACTUAL E SIZE .563 .88 3/4 5/16-18 1-1/2 .80 9/16 2 1.18 7/8 .875 .96 1-1/8 1/2-13 2-1/2 3 1.55 1-1/8 1.125 1.65 1-5/16 5/8-11 4

H G DIA J K 2.39 1/2 2-1/4 5/32

L 3/8

U V N Q S DIA DIA W .68 5/16-18 .16 11/16 15/16 3/4

3.53 3/4 2-5/8 3/16 11/16 .99 1/2-13 .19 4.50 15/16

1-5/16 1-1/8

X 3/4

Y Z .11 .80

.15 .67

7/32 13/16 1.33 5/8-11 .22 1-5/16 1-3/4 1-1/2 1-3/8 .18 .74

BALL HANDLE, POST MOUNTED (METRIC) CLM-1-SWA-2 CLM-4-SWA-2 CLM-5-SWA-2 CLM-2-SWA-2 CLM-3-SWA-2

M8 M12 M16

1-1/2 .80 14mm .551 .88 3/4 2.39 1/2 2-1/4 5/32 .39 .68 5/16-18 .16 11/16 15/16 3/4 3/4 .10 .95 2 1.18 1 1-5/16 1-1/8 1 .14 1.01 22mm .866 .96 1-1/8 3.53 3/4 2-5/8 3/16 .67 .99 1/2-13 .19 2-1/2 3 1.55 28mm 1.102 1.65 1-1/2 4.50 15/16 3 7/32 .83 1.33 5/8-11 .22 1-5/16 1-3/4 1-1/2 1-3/8 .16 .66 4

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 207 (Rev. 8-98)

SWING CLAMP ASSEMBLIES ARM: NODULAR IRON PER ASTM A536 GRADE 60-40-18, ZINC PLATED CLEAR CHROMATE SEE PAGES 55, 98, AND 189 FOR OTHER MATERIAL SPECIFICATIONS ALL OTHER PARTS: MILD STEEL, BLACK OXIDE FINISH

SWA P L E R 1SWA3

Knob Handle Flange Mounted Long-reach swing clamp that can be hand tightened for medium clamping force. The flange-mounted version is ideal for mounting on flat surfaces. The stop pin furnished can be installed on either side for clockwise or counterclockwise rotation. Swing arm can be turned over for more clearance underneath. To order with a Delrin® foot instead of steel, add “N” to the part number. Example: CL-1-SWA-3N.

KNOB HANDLE, FLANGE MOUNTED D THREAD H F E C PART NO. SIZE A B J G DIA K .69 3/4 2.45 1/2 1-3/4 5/32 3/4 CL-1-SWA-3 5/16-18 1-1/2 1 CL-4-SWA-3 1/2-13 2 1-3/8 1-1/8 1.50 1-1/8 3.88 3/4 2-1/8 3/16 CL-5-SWA-3 2-1/2 CL-2-SWA-3 5/8-11 3 1-1/2 1-1/4 1.59 1-5/16 4.56 15/16 2-3/4 7/32 CL-3-SWA-3 4

L .33

R S N P Q .25 1-1/4 #10 or M5 1-1/2 3/8

M 1/2

.44 11/16 .31 1-3/4 1/4 or M6 .58

1/2 5/16

.53 2-1/4 3/8 or M10 2-1/4 3/4

V T U W 1/4 11/16 15/16 3/4 1

1-5/16 1-1/8

3/8 1-5/16 1-3/4 1-1/2

SWA P L E R 1SWA4

Ball Handle Flange Mounted Same as above, except with a sliding ball handle for increased leverage.

BALL HANDLE, FLANGE MOUNTED D THREAD PART NO. SIZE A G C F B E CL-1-SWA-4 5/16-18 1-1/2 1 3/4 .88 3/4 2.39 CL-4-SWA-4 1/2-13 2 1-3/8 1-1/8 .96 1-1/8 3.53 CL-5-SWA-4 2-1/2 CL-2-SWA-4 5/8-11 3 1-1/2 1-1/4 1.65 1-5/16 4.50 CL-3-SWA-4 4

H DIA J K 1/2 2-1/4 5/32

L .33

3/4 2-5/8 3/16

.44 11/16 .31 1-3/4 1/4 or M6

15/16

7/32

.58

M 1/2

T U V W N P Q R S .25 1-1/4 #10 or M5 1-1/2 3/8 1/4 11/16 15/16 3/4 2

1/2 5/16

1-5/16 1-1/8

X 3/4 1

.53 2-1/4 3/8 or M10 2-1/4 3/4 3/8 1-5/16 1-3/4 1-1/2 1-3/8

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 208 (Rev. 8-98)

UP-THRUST CLAMPS STEEL, WEAR SURFACES HARDENED, BLACK OXIDE FINISH

Up-Thrust Clamps locate off of the part’s top surface and clamp up from below.

Combination clamp and locator with a unique upward clamping action. Pushing down the cam handle pulls the lower jaw upward. This clamps the workpiece against the stationary upper jaw, whose bottom surface is a precision-ground locator.

The lower jaw has two clamping surfaces 180° apart, one for thinner parts, the other for thicker parts. The cam handle rotates to screw the lower jaw up or down for fine adjustment.

PART NO. CL-MF40-5301

A 1/2-13

B RANGE MIN MAX 0 1-3/8

MAX C CLAMPING RANGE MIN MAX FORCE (LBS) 2200 1-3/8 2-3/4

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 209 (Rev. 7-04)

FORGED ADJUSTABLE CLAMPS FORGED C1045 STEEL, BLACK OXIDE FINISH

L IONA W T I D AD ES NO LE! SIZ AILAB AV Rugged forged steel pivot clamp. Instant height adjustment without blocks or shims. One-piece assembly allows quick setups and eliminates lost clamp pieces. Removable brass heel protects machine table. Clamp can swing 90° in either direction for loading clearance.

Mounting Accessories

FLANGE NUTS (Page 178)

A DIA B

STUDS (Page 189)

30°

REMOVABLE BRASS HEEL

SPRINGS (Page 183) FLAT WASHERS (Page 181)

“T” NUTS (Page 191)

PART NO. CL-6-FAC CL-8-FAC CL-10-FAC CL-12-FAC CL-16-FAC

RECOMMENDED STUD CLAMPING STUD LENGTH RANGE A B SIZE 3 or 80mm 0 to 1-3/4 7/16 3-1/4 3/8 or M10 4 or 110mm 0 to 2-1/16 9/16 4 1/2 or M12 0 to 3 11/16 5-1/2 5/8 or M16 5-1/2 or 150mm 6 or 150mm 0 to 4-1/4 13/16 6-1/4 3/4 or M20 8 or 200mm 0 to 5-1/2 1-1/16 7 7/8,1, or M24

C 1-1/4 1-5/8 1-7/8 2-5/8 3-1/8

D E F G 7/8 1 1-1/8 1-7/8 1-1/8 1-7/16 1-7/16 2-5/16 1-3/8 1-7/8 2 3-1/4 2 2-1/4 2-1/8 3-1/2 2-3/8 2-7/16 2-1/4 4

ALUMINUM ADJUSTABLE CLAMPS VAR-A-CLAMPS TENZALOY ALUMINUM ALLOY D E B

IBP

C VAC P E

IBP

8VAC

Simple, economical aluminum clamp, similar in function to the Forged Adjustable Clamps shown above.

STUD CLAMPING PART NO. SIZE RANGE CL-8-VAC 3/8 or M10 0 to 2" CL-10-VAC 1/2 or M12 0 to 2-1/2"

A 4-7/8 5-1/2

B 1-1/4 1-1/2

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

C 1-3/8 1-1/2

D 1 1-1/8

E 13/32 17/32

Page 210 (Rev. 1-05)

FORGED CLAMP STRAPS FORGED STEEL, 70,000 PSI YIELD STRENGTH, BLACK OXIDE FINISH

FSCS P E

Straight Locator Nose

4FSCS

FRCS P E

Straight Plain Nose

4FRCS

FGNS P E

Gooseneck Locator Nose

40FGNS

FGNS P E

Gooseneck Plain Nose

4FGNS

High-strength tapped-heel clamp strap available in straight or gooseneck design, with locator nose or plain nose. Locator-nose version is ideal for workpieces with machined sides. The accurately machined notch ensures precise, repeatable clamp location for increased machining clearance. For rear clamp rests, see Stud Leveling Feet on pages 132 and 133.

STRAIGHT — LOCATOR NOSE

Straight Locator Nose Clamp

PART NO. CL-4-FSCS CL-6-FSCS CL-8-FSCS CL-10-FSCS

STUD SIZE 5/8-11 3/4-10 7/8-9

A 4 6 8 10

B C D E F G H J 1-5/8 1-3/16 1-21/32 11/16 7/16 11/16 3/4 1/2 1-3/4 1-1/4 2-5/16 1-3/8 9/16 7/8 9/16 2-1/8 1-1/2 3 2 11/16 13/16 1-1/8 3/4 2-1/2 1-3/4 3-5/8 2-3/4 13/16 15/16 1-3/8 15/16

STRAIGHT — PLAIN NOSE CL-4-FRCS CL-6-FRCS CL-8-FRCS CL-10-FRCS

5/8-11 3/4-10 7/8-9

4 6 8 10

1-5/8 1-3/16 1-21/32 11/16 7/16 11/16 3/4 1/2 1 1-3/4 1-1/4 2-5/16 1-3/8 9/16 7/8 9/16 2-1/8 1-1/2 3 2 11/16 13/16 1-1/8 3/4 1-1/4 2-1/2 1-3/4 3-5/8 2-3/4 13/16 15/16 1-3/8 15/16 1-1/2

GOOSENECK — LOCATOR NOSE

Gooseneck Locator Nose Clamp

STUD PART NO. SIZE CL-40-FGNS 5/8-11 CL-60-FGNS CL-80-FGNS 3/4-10

K L A B C D E F G H J 4 1-31/32 3/16 1-3/16 1-3/4 11/16 1/2 3/4 3/4 1-7/16 .15 6 2-17/32 1 1-1/4 1-3/4 5/8 7/8 15/16 1-9/16 .25 2 8 3-9/32 1-5/8 1-9/16 2-1/4 13/16 1 1-1/8 1-1/8 .35

CL-4-FGNS CL-6-FGNS CL-8-FGNS

4 1-31/32 3/16 1-3/16 1-3/4 11/16 1/2 3/4 3/4 1-7/16 6 2-17/32 1 1-1/4 1-3/4 5/8 7/8 15/16 1-9/16 8 3-9/32 1-5/8 1-9/16 2-1/8 13/16 1 1-1/8 1-1/8 2

GOOSENECK — PLAIN NOSE 5/8-11 3/4-10

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 211 (Rev. 8-98)

ALUMINUM CLAMP STRAPS TENZALOY ALUMINUM ALLOY, 25,000 PSI YIELD STRENGTH, BRINELL HARDNESS-74

ALCS P E

Straight Locator Nose

4ALCS

Straight Plain Nose

ASCS P E 4ASCS

Gooseneck Locator Nose

AGNS P E 40AGNS

AGNS P E

Gooseneck Plain Nose

4AGNS

Soft clamp strap made of high-strength aluminum alloy. This tapped-heel clamp is available in straight or gooseneck design, with locator nose or plain nose. Locator-nose version is ideal for workpieces with machined sides. The accurately machined notch ensures precise, repeatable clamp location for increased machining clearance. For rear clamp rests, see Stud Leveling Feet on pages 132 and 133.

STRAIGHT — LOCATOR NOSE Straight Locator Nose Clamp

PART NO. CL-4-ALCS CL-6-ALCS CL-8-ALCS

STUD SIZE 1/2-13 5/8-11

A 4 6 8

B C D E F G H 1-5/8 1-3/16 1-21/32 11/16 7/16 9/16 3/4 1-3/4 1-1/4 2-5/16 1-3/8 9/16 7/8 2-1/8 1-1/2 3 2 11/16 11/16 1-1/8

4 6 8

1-5/8 1-3/16 1-21/32 11/16 7/16 9/16 3/4 1-3/4 1-1/4 2-5/16 1-3/8 9/16 7/8 2-1/8 1-1/2 3 2 11/16 11/16 1-1/8

J K 1/2 1/2-13 9/16 1/2-13 3/4 5/8-11

STRAIGHT — PLAIN NOSE CL-4-ASCS CL-6-ASCS CL-8-ASCS

1/2-13 5/8-11

1/2 1/2-13 9/16 1/2-13 3/4 5/8-11

GOOSENECK — LOCATOR NOSE

Gooseneck Locator Nose Clamp

STUD PART NO. SIZE CL-40-AGNS 1/2-13 CL-60-AGNS CL-80-AGNS 5/8-11

A 4 6 8

B C D E F G H J K L M 1-7/8 1/4 1-3/16 1-5/8 9/16 1/2 3/4 13/16 1-7/16 .25 1/2-13 2-1/2 1 1-1/4 1-3/4 5/8 7/8 15/16 1-9/16 .30 1/2-13 3-3/16 1-5/8 1-1/2 2-1/8 11/16 1 1-1/8 1-1/8 2-1/16 .40 5/8-11

CL-4-AGNS CL-6-AGNS CL-8-AGNS

4 6 8

1-7/8 1/4 1-3/16 1-5/8 9/16 1/2 3/4 13/16 1-7/16 — 1/2-13 2-1/2 1 1-1/4 1-3/4 5/8 7/8 15/16 1-9/16 — 1/2-13 3-3/16 1-5/8 1-1/2 2-1/8 11/16 1 1-1/8 1-1/8 2-1/16 — 5/8-11

GOOSENECK — PLAIN NOSE 1/2-13 5/8-11

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 212 (Rev. 1-05)

FORGED U CLAMPS FORGED STEEL, 70,000 PSI YIELD STRENGTH, BLACK OXIDE FINISH

Open U end allows totally removing clamp strap when unclamped. Clamp tips are stepped to provide repeatable location.

Cylindrical pin end minimizes contact area and is useful for clamping in horizontal holes.

PART NO. CL-4-FUC CL-6-FUC CL-8-FUC CL-12-FUC

BOLT SIZE

A 3-1/2 5/8-11 or M16 5-7/16 3/4-10 or M20 7-3/8 1-8 or M24 10-15/16

B C 1-15/16 3/4 2-1/4 7/8 2-5/8 1-1/8 3-3/16 1-3/8

D E H F G 11/16 5/8 5/8 1/4 1/2 11/16 3/4 3/4 5/16 3/4 13/16 27/32 3/8 1-1/32 13/16 1-1/16 1-3/32 1/2 1-3/16 1-1/32

FORGED SCREW CLAMPS FRAME: FORGED STEEL, 70,000 PSI YIELD STRENGTH, BLACK OR GRAY FINISH OTHER COMPONENTS: CARBON STEEL, BLACK OXIDE FINISH D

“L” THD. C Handy downholding screw clamp for T-slotted tables. The sturdy forged steel frame is designed for maximum strength and rigidity. Sliding T handle provides extra leverage. The clamping pad is V-notched to allow clamping small cylindrical parts. Each clamp is furnished with T-slot bolt, nut, and washer.

E F K

A MAX.

PART NO. CL-8-FSC CL-10-FSC CL-12-FSC

T-SLOT BOLT SIZE 1/2-13 5/8-11 3/4-10

FITS TABLE SLOTS 1/2, 9/16, 5/8, 14mm, 16mm 5/8, 11/16, 3/4, 16mm, 18mm 3/4, 13/16, 20mm, 22mm

A MAX 2-1/4 3-1/4

B 2

C 5-3/4

D 4

2-1/4 7-7/16 6-1/2

E 4-3/8

F 3-1/8

G 3

H 5/8

J 1-1/4

K DIA L 1-1/8 5/8-11

5-7/8

4-1/4

3/4

1-1/2

1-1/4 3/4-10

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 213 (Rev. 10-05)

SLOTTED-HEEL CLAMP STRAPS STEEL: 1018, CARBURIZED-HARDENED, BLACK OXIDE FINISH STAINLESS STEEL: 300 SERIES

Steel and Stainless Steel

See pages 214-216 for complete assemblies using these Clamp Straps.

Popular Clamp Strap with a slot underneath to allow sliding it straight back for clear loading. Two drill spots on the sides provide a secure grip for retracting the clamp. Available in steel for 1/4-20 (M6) to 3/4-10 (M20) stud sizes, or stainless steel for #10-32 to 3/8-16 stud sizes. Each size is available in several strap lengths.

STRAPS — STEEL CS P E 0CS 17215

PART NO. CL-0-CS CL-1-CS CL-1A-CS CL-1B-CS CL-2-CS CL-3A-CS CL-3-CS CL-4-CS CL-5-CS CL-6A-CS CL-6-CS CL-8-CS CL-10-CS CL-15A-CS CL-16-CS CL-18-CS CL-18A-CS CL-19-CS CL-21-CS CL-22A-CS

3/8 5/8

1/4-20 or M6

5/16-18 or M8 1/2 3/4

3/8-16 or M10 1/2 1-1/8

1/2-13 or M12 5/8 1-1/4

5/8-11 or M16 7/8 1-1/2

3/4-10 or M20

1 1-3/4

D 2 2-1/2 2-1/2 3 3 3-1/2 4 5 6 3-1/2 4 5 6 4 5 6 6-1/2 6 7 8

E 27/32 1-3/32 27/32 1-11/32 1-9/32 1-17/32 1-25/32 2-9/32 2-25/32 1-1/2 1-3/4 2-1/4 2-3/4 1-11/16 2-3/16 2-11/16 2-15/16 2-5/8 3-1/8 3-5/8

F H G J 19/32 1/4 11/32 9/32 13/16 1/2 5/16 7/16 11/32 1 7/8 1-1/8 1-3/8 13/32 1/2 27/64 1-7/8 2-3/8 1-1/32 1-9/32 13/32 1/2 17/32 1-25/32 2-9/32 1-3/32 1-19/32 2-3/32 1/2 19/32 21/32 2-11/32 2 2-9/16 1/2 19/32 13/16 3-1/8

5/32 3/16 7/32

1/4

9/32

3/8

9/32

3/8

9/32

1/2

5/16

1/2

STRAPS — STAINLESS, MINIATURE

See pages 53-56MF for stackable high-rise clamp-strap assemblies.

CL-17215 CL-17220 CL-17320 CL-17325 CL-17420 CL-17425 CL-17430 CL-17530 CL-17540

#10-32

1/4 1/2

1/4-20

3/8 5/8

5/16-18

3/8 3/4

3/8-16

1/2

1-1/2 2 2 2-1/2 2 2-1/2 3 3 4

21/32 15/32 29/32 23/32 7/8 11/16 1-1/8 15/16 27/32 19/32 1-3/32 27/32 1-11/32 1-3/32 1-5/16 1 1-13/16 1-1/2

3/16 5/16 7/32 3/32 7/32 1/4

3/8

9/32

1/8

9/32

5/16 7/16 11/32 5/32 11/32 3/8

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

1/2 13/32 3/16 13/32

Page 214 (Rev. 7-05)

SLOTTED-HEEL CLAMP STRAPS

SHA P E

SEE PAGES 54, 61, 176-179, 181-183, 189, AND 213 FOR MATERIAL SPECIFICATIONS

0SHA1

A complete clamp-strap assembly using a slottedheel strap from page 213. Select any of the six nut/knob combinations shown below by adding the appropriate suffix to the part number. Other Stud and Clamp Rest lengths are available (order pieces individually).

IBP B A

Steel C IBP Spherical Nut & Washer CL-xx-SHA-1

Flange Nut CL-xx-SHA-2

Hand Knob with Acorn Nut with Bar Knob with Spherical Washer Spherical Washer Spherical Washer* CL-xx-SHA-4 CL-xx-SHA-5 CL-xx-SHA-6

Cam Handle with Spherical Washer (See page 214)

E THREAD SIZE

ASSEMBLIES — STEEL (USA) PART NO. CL-0-SHA-x CL-1-SHA-x CL-1A-SHA-x CL-1B-SHA-x CL-2-SHA-x CL-3-SHA-x CL-4-SHA-x CL-6-SHA-x CL-8-SHA-x CL-9-SHA-x CL-10-SHA-x CL-12-SHA-x CL-14-SHA-x CL-20-SHA-x CL-22-SHA-x CL-24-SHA-x CL-25-SHA-x CL-27-SHA-x CL-29-SHA-x CL-31-SHA-x

THREAD SIZE 1/4-20 5/16-18

3/8-16

1/2-13

5/8-11

3/4-10

A 2 2-1/2 2-1/2 3 3 3-1/2 4 5 6 3-1/2 4 5 6 4 5 6 6-1/2 6 7 8

5/8

3/8

3/4

1/2

1-1/8

1/2

1-1/4

5/8

1-1/2

7/8

1-3/4

E 27/32 1-3/32 27/32 1-11/32 1-9/32 1-17/32 1-25/32 2-9/32 2-25/32 1-1/2 1-3/4 2-1/4 2-3/4 1-11/16 2-3/16 2-11/16 2-15/16 2-5/8 3-1/8 3-5/8

CLAMP STRAP CL-0-CS CL-1-CS CL-1A-CS CL-1B-CS CL-2-CS CL-3A-CS CL-3-CS CL-4-CS CL-5-CS CL-6A-CS CL-6-CS CL-8-CS CL-10-CS CL-15A-CS CL-16-CS CL-18-CS CL-18A-CS CL-19-CS CL-21-CS CL-22A-CS

CLAMP REST

SPRING

FLAT WASHER

STUD

CL-1-CR

CL-5-SPG

CL-7-FW

CL-1/4-20x2.50-STUD

CL-1A-CR

CL-6-SPG

CL-14-FW

CL-5/16-18x 3.00-STUD

CL-2-CR

CL-7-SPG

CL-1-FW

CL-3/8-16x3.00-STUD

CL-4-CR

CL-9-SPG

CL-2-FW

CL-1/2-13x4.00-STUD

CL-6-CR

CL-11-SPG

CL-3-FW

CL-5/8-11x4.50-STUD

CL-8-CR

CL-13-SPG

CL-4-FW

CL-3/4-10x5.00-STUD

ASSEMBLIES — STEEL (METRIC) 2 27/32 CLM-0-SHA-x CL-0-CS 5/8 3/8 M6 CLM-1-CR CL-5-SPG CL-7-FW 2-1/2 1-3/32 CLM-1-SHA-x CL-1-CS 2-1/2 27/32 CLM-1A-SHA-x CL-1A-CS 3/4 1/2 M8 CLM-1A-CR CL-6-SPG CL-14-FW 3 1-11/32 CL-1B-CS CLM-1B-SHA-x 3 1-9/32 CLM-2-SHA-x CL-2-CS 3-1/2 1-17/32 CL-3A-CS CLM-3-SHA-x 4 1-25/32 CLM-4-SHA-x 1-1/8 1/2 M10 CL-3-CS CLM-2-CR CL-7-SPG CL-1-FW 5 2-9/32 CLM-6-SHA-x CL-4-CS 6 2-25/32 CLM-8-SHA-x CL-5-CS 3-1/2 1-1/2 CLM-9-SHA-x CL-6A-CS 4 1-3/4 CLM-10-SHA-x CL-6-CS 1-1/4 M12 5/8 CLM-4-CR CL-9-SPG CL-2-FW 5 2-1/4 CLM-12-SHA-x CL-8-CS 6 2-3/4 CLM-14-SHA-x CL-10-CS 4 1-11/16 CL-15A-CS CLM-20-SHA-x 5 2-3/16 CLM-22-SHA-x CL-16-CS 7/8 CLM-5-CR CL-11-SPG CL-3-FW M16 1-1/2 6 2-11/16 CLM-24-SHA-x CL-18-CS 6-1/2 2-15/16 CL-18A-CS CLM-25-SHA-x 6 2-5/8 CLM-27-SHA-x CL-19-CS 1 7 3-1/8 CLM-29-SHA-x CLM-8-CR CL-13-SPG CLM-10-FW CL-21-CS 1-3/4 M20 8 3-5/8 CLM-31-SHA-x CL-22A-CS * Available in thread sizes 3/8-16 and above (M10 and above in metric).

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

CLM-6x65-STUD CLM-8x80-STUD

CLM-1x80-STUD

CLM-12x95-STUD

CLM-16x110-STUD

CLM-20x125-STUD

Page 215 (Rev. 7-05)

SLOTTED-HEEL CLAMP STRAPS SEE PAGES 65, 177-178, 181-183, 190 AND 213 FOR MATERIAL SPECIFICATIONS

IBP

Stainless Steel (Miniature)

SSCA P E

A complete clamp-strap assembly using a stainless steel slotted-heel strap from page 213. Select any of the four nut/knob combinations shown below by adding the appropriate suffix to the part number. Other Stud and Clamp Rest lengths are available (order pieces individually).

27151

C IBP

E THREAD SIZE

Flange Nut

CL-xxxx-1

Flange Nut and Spherical Washer CL-xxxx-2

Knurled Knob CL-xxxx-3

Knurled Knob and Spherical Washer CL-xxxx-4

ASSEMBLIES — STAINLESS, MINIATURE (USA) PART NO. CL-2715-x CL-2720-x CL-2820-x CL-2825-x CL-2920-x CL-2925-x CL-2930-x CL-3030-x CL-3040-x

THREAD SIZE #10-32 1/4-20 5/16-18 3/8-16

A 1-1/2 2 2 2-1/2 2 2-1/2 3 3 4

1/2

1/4

5/8

3/8

3/4

3/8

1/2

E 21/32 29/32 7/8 1-1/8 27/32 1-3/32 1-11/32 1-5/16 1-13/16

CLAMP STRAP CL-17215 CL-17220 CL-17320 CL-17325 CL-17420 CL-17425 CL-17430 CL-17530 CL-17540

CLAMP REST

SPRING

FLAT WASHER

STUD

JAM NUT

CL-13410

CL-2430.7

CL-254

CL-11415

CL-3-FJN-S

CL-13515

CL-2440.7

CL-255

CL-11520

CL-4-JN-S

CL-13612

CL-2450.7

CL-256

CL-11620

CL-5-JN-S

CL-13717

CL-2461.0

CL-257

CL-11725

CL-6-JN-S

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 216 (Rev. 8-05)

SLOTTED-HEEL CLAMP STRAPS SEE PAGES 177, 179, 181-185, AND 213 FOR MATERIAL SPECIFICATIONS

A complete clamp-strap assembly using a slotted-heel strap from page 213 along with a Double Cam and Eyebolt. Other Eyebolt and Clamp Rest lengths are available (order pieces individually). SCA P E

Straddle Cam Steel

0SCA

ASSEMBLIES — STRADDLE CAM, STEEL (USA) PART NO. CL-0-SCA CL-1-SCA CL-1A-SCA CL-1B-SCA CL-2-SCA CL-2A-SCA CL-3-SCA CL-4-SCA CL-5-SCA CL-6A-SCA CL-6-SCA CL-8-SCA CL-9A-SCA CL-17-SCA CL-19-SCA CL-21-SCA CL-22-SCA CL-24-SCA CL-26-SCA CL-28-SCA

THREAD SIZE

1/4-20

5/8

3/8

3/4

1/2

A 2 2-1/2 5/16-18 2-1/2 3 3 3-1/2 3/8-16 4 5 6 3-1/2 4 1/2-13 5 6 4 5 5/8-11 6 6-1/2 6 3/4-10 7 8

1-1/8 1/2

1-1/4 5/8

1-1/2 7/8

1-3/4

E 27/32 1-3/32 27/32 1-11/32 1-9/32 1-17/32 1-25/32 2-9/32 2-25/32 1-1/2 1-3/4 2-1/4 2-3/4 1-11/16 2-3/16 2-11/16 2-15/16 2-5/8 3-1/8 3-5/8

CAM HANDLE AND CLAMP CLAMP FLAT SPHERICAL DOWEL PIN STRAP REST SPRING EYE BOLT WASHER WASHER CL-11-CH CL-0-CS CL-7-FW CL-1-SW CL-1-CR CL-5-SPG CL-25-EB CL-3/16x.62-CADP CL-1-CS CL-11A-CH CL-1A-CS CL-14-FW CL-11-SW CL-1A-CR CL-6-SPG CL-31-EB CL-1/4x.62-CADP CL-1B-CS CL-2-CS CL-3A-CS CL-12-CH CL-3-CS CL-2-CR CL-7-SPG CL-38-EB CL-1-FW CL-2-SW CL-5/16x.87-CADP CL-4-CS CL-5-CS CL-6A-CS CL-13-CH CL-6-CS CL-2-FW CL-3-SW CL-4-CR CL-9-SPG CL-50-EB CL-3/8x1.00-CADP CL-8-CS CL-10-CS CL-15A-CS CL-14-CH CL-16-CS CL-6-CR CL-11-SPG CL-62-EB CL-5/8x1.25-CADP CL-3-FW CL-4-SW CL-18-CS CL-18A-CS CL-19-CS CL-15-CH CL-21-CS CL-8-CR CL-13-SPG CL-75-EB CL-5/8x1.50-CADP CL-4-FW CL-5-SW CL-22A-CS

ASSEMBLIES — STRADDLE CAM, STEEL (METRIC) CLM-0-SCA CLM-1-SCA CLM-2-SCA CLM-2A-SCA CLM-3-SCA CLM-4-SCA CLM-5-SCA CLM-6A-SCA CLM-6-SCA CLM-8-SCA CLM-9A-SCA CLM-17-SCA CLM-19-SCA CLM-21-SCA CLM-22-SCA CLM-24-SCA CLM-26-SCA CLM-28-SCA

M10

M12

M16

M20

2 2-1/2 3 3-1/2 4 5 6 3-1/2 4 5 6 4 5 6 6-1/2 6 7 8

5/8

3/8

1-1/8 1/2

1-1/4 5/8

1-1/2 7/8

1-3/4

27/32 1-3/32 1-9/32 1-17/32 1-25/32 2-9/32 2-25/32 1-1/2 1-3/4 2-1/4 2-3/4 1-11/16 2-3/16 2-11/16 2-15/16 2-5/8 3-1/8 3-5/8

CL-0-CS CL-1-CS CL-2-CS CL-3A-CS CL-3-CS CL-4-CS CL-5-CS CL-6A-CS CL-6-CS CL-8-CS CL-10-CS CL-15A-CS CL-16-CS CL-18-CS CL-18A-CS CL-19-CS CL-21-CS CL-22A-CS

CLM-11-CH

CLM-1-CR CL-5-SPG CLM-25A-EB CLM-6x16-CADP

CL-7-FW

CL-1-SW

CLM-2-CR CL-7-SPG CLM-40-EB CLM-10x24-CADP CL-1-FW

CL-2-SW

CLM-4-CR CL-9-SPG CLM-50A-EB

CLM-13-CH CL-2-FW CLM-12x30-CADP

CL-3-SW

CLM-5-CR CL-11-SPG CLM-62-EB

CLM-14-CH CL-3-FW CLM-16x36-CADP

CL-4-SW

CLM-8-CR CL-13-SPG CLM-76A-EB

CLM-15-CH CLM-10-FW CLM-20-SW CLM-20x40-CADP

CLM-12-CH

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 217 (Rev. 6-04)

SLOTTED-HEEL PADDED CLAMP STRAPS STRAP: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH PAD: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

Pad

Steel Slotted-Heel Clamp Strap that features a replaceable clamping pad attached with two screws (furnished). Clamp Strap also easily accepts custom pads or other attachments. Rear end is tapped on either side for a Finger Pin (see page 84). Available for 1/4-20 (M6) to 1/2-13 (M12) stud sizes, most in a choice of several strap lengths.

STRAPS — STEEL WITH STEEL PAD PART NO. CL-165-CS CL-166-CS CL-168-CS CL-169-CS CL-170A-CS E

A 1/4-20 or M6

B 3/8

C 5/8

3/8-16 or M10

5/8

1-1/4

1/2-13 or M12

3/4

1-1/2

D 2 3-1/2 4-1/2 4-1/2 6

E 3/8 11/16 7/8

F 5/8 1-1/8 1-5/8 1-1/4 2

G 1/4

H 1/8

J 9/32

K 1/8

L 1/4

P 11/32

Q 9/64

1/2

1/4

27/64

9/32

3/8

1/2

5/16-18

5/8

1/4

5/8

3/8

17/32

9/32

3/8

1/2

5/16-18

3/4

5/16

D PAD

A THREAD

Spherical Nut & Washer CL-xx-SHPA-1

Flange Nut CL-xx-SHPA-2

Hand Knob with Acorn Nut with Spherical Washer Spherical Washer CL-xx-SHPA-4 CL-xx-SHPA-5

Cam Handle with Spherical Washer CL-xx-SPHA-7

ASSEMBLIES — STEEL WITH STEEL PAD (USA) D E F A PART NO. 2 3/8 5/8 1/4-20 CL-165-SHPA-x 3-1/2 1-1/8 CL-166-SHPA-x 3/8-16 4-1/2 11/16 1-5/8 CL-168-SHPA-x 4-1/2 1-1/4 CL-169-SHPA-x 7/8 1/2-13 6 2 CL-170A-SHPA-x

S 7/8 1-7/16 1-15/16 2-1/8 2-7/8

CLAMP STRAP CL-165-CS CL-166-CS CL-168-CS CL-169-CS CL-170A-CS

CLAMP REST CL-1-CR

SPRING CL-5-SPG

FLAT WASHER CL-7-FW

CLAMPING STUD CL-1/4-20x2.50-STUD

CL-2-CR

CL-7-SPG

CL-1-FW

CL-3/8-16x3.00-STUD

CL-4-CR

CL-9-SPG

CL-2-FW

CL-1/2-13x4.00-STUD

REPLACEMENT PADS

Replacement or optional pads for the Clamp Straps shown above. Available in steel, reinforced plastic, or brass.

PART NO. STEEL PAD CL-40-CP CL-42-CP CL-43-CP

PART NO. PLASTIC PAD CL-20-CP CL-22-CP CL-23-CP

PART NO. STUD BRASS SIZE PAD CL-30-CP 1/4-20 or M6 CL-32-CP 3/8-16 or M10 CL-33-CP 1/2-13 or M12

C 5/8 1-1/4 1-1/2

G 1/4 1/2 5/8

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

H 1/8 1/4 3/8

P R 11/32 #5-40 5/8 #10-24 3/4 1/4-20

Page 218 (Rev. 8-98)

TAPPED-HEEL CLAMP STRAPS STEEL: 1018, CARBURIZED-HARDENED, BLACK OXIDE FINISH STAINLESS STEEL: 300 SERIES

CS P E 61CS

Steel and Stainless Steel Popular Clamp Strap with a tapped heel that accepts a clamping screw or rear support. Often used with a Guide Block to allow sliding the strap straight back for clear loading. Two drill spots on the sides provide a secure grip for retracting the clamp. Can also be used with a Stud Leveling Foot as a rear support (see pages 132 and 133). Available in steel for 1/4-20 to 3/4-10 stud sizes (M6 to M20 in metric), or stainless steel for #10-32 to 3/8-16 stud sizes. Each size is available in several strap lengths.

STRAPS — STEEL (USA) PART NO. CL-61-CS CL-62-CS CL-63-CS CL-65-CS CL-67-CS CL-69-CS CL-70-CS CL-71-CS CL-72-CS CL-73-CS CL-74-CS CL-75-CS CL-81-CS CL-77-CS CL-83-CS CL-85-CS CL-86-CS CL-88-CS CL-90-CS CL-92-CS

1/4-20

3/8

5/8

3/8-16

1/2

1-1/8

1/2-13

5/8

1-1/4

5/8-11

7/8

1-1/2

3/4-10

1-3/4

D 2 2-1/2 3 4 5 6 3-1/2 4 4-1/2 5 5-1/2 6 4 4-1/2 5 6 6-1/2 6 7 8

E 13/16 1-1/16 1-7/32 1-23/32 2-7/32 2-23/32 1-13/32 1-21/32 1-29/32 2-5/32 2-13/32 2-21/32 1-9/16 1-13/16 2-1/16 2-9/16 2-13/16 2-1/2 3 3-1/2

F 9/16 13/16 13/16 1-5/16 1-13/16 2-5/16 15/16 1-3/16 1-7/16 1-11/16 1-15/16 2-3/16 1 1-1/4 1-1/2 2 2-1/4 1-29/32 2-13/32 2-29/32

1/4

11/32

9/32

1/4-20

13/32

1/2

27/64

3/8-16

13/32

1/2

17/32

1/2-13

1/2

19/32

21/32

5/8-11

1/2

19/32

13/16

3/4-10

1/4

11/32

9/32

13/32

1/2

27/64

M10

13/32

1/2

17/32

M12

1/2

19/32

21/32

M16

1/2

19/32

13/16

M20

STRAPS — STEEL (METRIC) CLM-61-CS CLM-62-CS CLM-63-CS CLM-65-CS CLM-67-CS CLM-70-CS CLM-71-CS CLM-72-CS CLM-73-CS CLM-75-CS CLM-81-CS CLM-83-CS CLM-85-CS CLM-88-CS CLM-92-CS

3/8

5/8

M10

1/2

1-1/8

M12

5/8

1-1/4

M16

7/8

1-1/2

M20

1-3/4

2 2-1/2 3 4 5 3-1/2 4 4-1/2 5 6 4 5 6 6 8

13/16 1-1/16 1-7/32 1-23/32 2-7/32 1-13/32 1-21/32 1-29/32 2-5/32 2-21/32 1-9/16 2-1/16 2-9/16 2-1/2 3-1/2

9/16 13/16 13/16 1-5/16 1-13/16 15/16 1-3/16 1-7/16 1-11/16 2-3/16 1 1-1/2 2 1-29/32 2-29/32

STRAPS — STAINLESS, MINIATURE (USA)

See pages 219-221 for complete assemblies using these clamp straps.

CL-18215 CL-18220 CL-18320 CL-18325 CL-18420 CL-18425 CL-18430 CL-18530 CL-18535 CL-18540

#10-32

1/4

1/2

1/4-20

3/8

5/8

5/16-18

3/8

3/4

3/8-16

1/2

1-1/2 2 2 2-1/2 2 2-1/2 3 3 3-1/2 4

19/32 27/32 13/16 1-1/16 3/4 1 1-1/4 1-7/32 1-15/32 1-23/32

13/32 21/32 19/32 27/32 1/2 3/4 1 7/8 1-1/8 1-3/8

3/16

5/16

7/32

#10-32

1/4

3/8

9/32

1/4-20

5/16

7/16

11/32

5/16-18

3/8

1/2

27/64

3/8-16

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 219 (Rev. 7-05)

TAPPED-HEEL CLAMP STRAPS SEE PAGES 55, 177, 179, 181, 183, 189, AND 218 FOR MATERIAL SPECIFICATIONS A complete clamp-strap assembly using a tapped-heel strap from page 218. Select one of two clamping screws or a rear Clamp Rest, as shown below, by adding the appropriate suffix to the part number.

B A THREAD

Steel

E F THREAD (SCREWS NOT FURNISHED) Hand-Knob Clamping Screw CL-xx-THA-HK

Hex-Head Clamping Screw Oval-Point Clamp Rest CL-xx-THA-OP CL-xx-THA-HH

Leveling Foot CL-xx-THA-LF

ASSEMBLIES — STEEL (USA)

PART NO. CL-1-THA-xx CL-2-THA-xx CL-3-THA-xx CL-5-THA-xx CL-7-THA-xx CL-9-THA-xx CL-10-THA-xx CL-11-THA-xx CL-12-THA-xx CL-13-THA-xx CL-14-THA-xx CL-15-THA-xx CL-21-THA-xx CL-17-THA-xx CL-23-THA-xx CL-25-THA-xx CL-26-THA-xx CL-28-THA-xx CL-30-THA-xx CL-32-THA-xx

THREAD SIZE 1/4-20 3/8-16

1/2-13

5/8-11

3/4-10

A 2 2-1/2 3 4 5 6 3-1/2 4 4-1/2 5 5-1/2 6 4 4-1/2 5 6 6-1/2 6 7 8

5/8

3/8

1-1/8 1/2

1-1/4 5/8

1-1/2 7/8

1-3/4

E 11/16 15/16 1-1/32 1-17/32 2-1/32 2-17/32 1-5/32 1-13/32 1-21/32 1-29/32 2-5/32 2-13/32 1-1/4 1-1/2 1-3/4 2-1/4 2-1/2 2-1/8 2-5/8 3-1/8

F #6-32 #10-32

1/4-20

L 13/16 1-1/16 1-7/32 1-23/32 2-7/32 2-23/32 1-13/32 1-21/32 1-29/32 2-5/32 2-13/32 2-21/32 1-9/16 1-13/16 2-1/16 2-9/16 2-13/16 2-1/2 3 3-1/2

CLAMP STRAP CL-61-CS CL-62-CS CL-63-CS CL-65-CS CL-67-CS CL-69-CS CL-70-CS CL-71-CS CL-72-CS CL-73-CS CL-74-CS CL-75-CS CL-81-CS CL-77-CS CL-83-CS CL-85-CS CL-86-CS CL-88-CS CL-90-CS CL-92-CS

STUD & SPRING CL-1/4-20x2.00-STUD CL-5-SPG

NUTS CL-4-JN CL-1-SNW

CL-4-GB

CL-3/8-16x3.00-STUD CL-7-SPG

CL-6-JN CL-2-SNW

CL-1-FW

CL-6-GB

CL-1/2-13x4.00-STUD CL-9-SPG

CL-8-JN CL-3-SNW

CL-2-FW

CL-8-GB

CL-5/8-11x4.00-STUD CL-11-SPG

CL-10-JN CL-4-SNW

CL-3-FW

CL-11-GB

CL-3/4-10x5.00-STUD CL-13-SPG

CL-12-JN CL-5-SNW

CL-4-FW

CL-2-GB

CLM-6x65-STUD CL-5-SPG

CLM-6-JN CLM-6-SNW

CL-7-FW

CL-4-GB

CLM-10x80-STUD CL-7-SPG

CLM-10-JN CLM-10-SNW

CL-1-FW

CL-6-GB

CLM-12x95-STUD CL-9-SPG

CLM-12-JN CLM-12-SNW

CL-2-FW

CL-8-GB

CLM-16x110-STUD CLM-16-JN CLM-16-SNW CL-11-SPG

CL-3-FW

CL-11-GB

CLM-20x125-STUD CLM-20-JN CLM-20-SNW CLM-10-FW CL-13-SPG

GUIDE BLOCK* CL-2-GB

FLAT WASHER CL-7-FW

ASSEMBLIES — STEEL (METRIC) CLM-1-THA-xx 2 M6 CLM-2-THA-xx 2-1/2 5/8 CLM-3-THA-xx 3 CLM-5-THA-xx 4 M10 1-1/8 CLM-7-THA-xx 5 CLM-10-THA-xx 3-1/2 CLM-11-THA-xx 4 CLM-12-THA-xx M12 4-1/2 1-1/4 CLM-13-THA-xx 5 CLM-15-THA-xx 6 CLM-21-THA-xx 4 CLM-23-THA-xx 5 M16 1-1/2 CLM-25-THA-xx 6 CLM-28-THA-xx 6 M20 1-3/4 CLM-32-THA-xx 8 * Not included on oval-point version

11/16 15/16 1-1/32 1/2 1-17/32 2-1/32 1-5/32 1-13/32 5/8 1-21/32 1-29/32 2-13/32 1-1/4 7/8 1-3/4 2-1/4 2-1/8 1 3-1/8 3/8

M4 M5

M6 M6

13/16 1-1/16 1-1/16 1-23/32 2-7/32 1-13/32 1-21/32 1-29/32 2-5/32 2-21/32 1-9/16 2-1/16 2-9/16 2-1/2 3-1/2

CLM-61-CS CLM-62-CS CLM-63-CS CLM-65-CS CLM-67-CS CLM-70-CS CLM-71-CS CLM-72-CS CLM-73-CS CLM-75-CS CLM-81-CS CLM-83-CS CLM-85-CS CLM-88-CS CLM-92-CS

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 220 (Rev. 8-98)

TAPPED-HEEL CLAMP STRAPS SEE PAGES 65, 177-178, 181-183, 190, AND 218 FOR MATERIAL SPECIFICATIONS

A complete clamp-strap assembly using a stainless steel tapped-heel strap from page 218. Standard assembly includes a Knurled-Head Screw. To order with a rear Clamp Rest instead, add “-1” to the part number. Example: CL-3115-1. Other lengths of Studs, Clamp Rests, and Knurled-Head Screws are available (order pieces individually).

Stainless Steel (Miniature) SSCA P E 3115

Knurled-Head Screw CL-xxxx

Clamp Rest CL-xxxx-1

ASSEMBLIES — STAINLESS, MINIATURE (USA) PART NO. KNURLED PART NO. WITH KNURLED CLAMP HEAD THREAD WITH E HEAD SCREW CLAMP REST SIZE A B C STRAP SCREW CL-3115 1-1/2 1/2 1/4 19/32 CL-18215 CL-23212 CL-3115-1 #10-32 27/32 CL-18220 CL-3120 2 CL-3120-1 CL-3220 2 CL-3220-1 5/8 3/8 13/16 CL-18320 CL-23515 1/4-20 1-1/16 CL-18325 CL-3225 2-1/2 CL-3225-1 3/4 CL-18420 CL-3320 2 CL-3320-1 1 CL-3325 CL-18425 CL-23620 5/16-18 2-1/2 3/4 3/8 CL-3325-1 1-1/4 CL-18430 CL-3330 3 CL-3330-1 1-7/32 CL-18530 CL-3430 3 CL-3430-1 CL-3435 3/8-16 3-1/2 1 1/2 1-15/32 CL-18535 CL-23820 CL-3435-1 1-23/32 CL-18540 CL-3440 4 CL-3440-1

CLAMP REST

FLAT SPRING WASHER

STUD

FLANGE NUT

CL-13410 CL-2430.7

CL-254

CL-11415 CL-124

CL-13515 CL-2440.7

CL-255

CL-11520 CL-125

CL-13612 CL-2450.7

CL-256

CL-11620 CL-126

CL-13717 CL-2461.0

CL-257

CL-11725 CL-127

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 221 (Rev. 7-05)

TAPPED-HEEL PADDED CLAMP STRAPS STRAP: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH PAD: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH

Steel Tapped-Heel Clamp Strap that features a replaceable clamping pad attached with two screws (furnished). Clamp Strap also easily accepts custom pads or other attachments. Available for 1/4-20 to 1/2-13 stud sizes, most in a choice of several strap lengths.

STRAPS — STEEL WITH STEEL PAD

PART NO. A CL-157-CS 1/4-20 CL-158A-CS 5/16-18 CL-159A-CS CL-160A-CS 3/8-16 CL-162A-CS CL-163A-CS 1/2-13 CL-164A-CS

A THREAD

B 3/8 1/2 5/8 3/4

F G K D E H J M 5/8 1/4 1/8 9/32 1/4-20 7/32 2 3/8 3/4 3/8 3/16 11/32 5/16-18 1/4 7/8 2-1/2 9/16 1-1/4 3-1/2 1-1/8 3-1/2 1/2 1/4 27/64 3/8-16 3/8 1-1/4 11/16 1-5/8 4-1/2 1-1/4 5/8 3/8 17/32 1/2-13 7/16 1-1/2 4-1/2 7/8 2 6 C 5/8

T Hand-Knob Clamping Screw CL-xx-THPA-HK

1/2

3/16

5/8

1/4

3/4

5/16

Hex-Head Clamping Screw CL-xx-THPA-HH

P Q 11/32 9/64

Oval-Point Clamp Rest CL-xx-THPA-OP

Leveling Foot CL-xx-THPA-LF

ASSEMBLIES — STEEL WITH STEEL PAD (USA) PART NO. CL-157-THPA-xx

1/4-20

3/8

5/8

25/32

3-1/2 1-1/8 1-5/16 CL-160A-THPA-xx 3/8-16 4-1/2 11/16 1-5/8 1-13/16 CL-162A-THPA-xx 4-1/2 1-1/4 1-15/16 CL-163A-THPA-xx 7/8 1/2-13 6 2 2-11/16 CL-164A-THPA-xx

CLAMP STRAP

GUIDE BLOCK

CLAMPING STUD

NUTS CL-4-JN 21/32 CL-157-CS CL-2-GB CL-5-SPG CL-1/4-20x2.00-STUD CL-1-SNW 1-1/8 CL-160A-CS CL-6-JN CL-4-GB CL-7-SPG CL-3/8-16x3.00-STUD 1-5/8 CL-162A-CS CL-2-SNW 1-11/16 CL-163A-CS CL-8-JN CL-9-SPG CL-1/2-13x4.00-STUD CL-8-GB 2-7/16 CL-164A-CS CL-3-SNW SPRING

FLAT WASHER CL-7-FW CL-1-FW CL-2-FW

REPLACEMENT PADS

Replacement or optional pads for the Clamp Straps shown above. Available in steel, reinforced plastic, or brass.

PART NO. STEEL PAD CL-40-CP CL-41-CP CL-42-CP CL-43-CP

PART NO. PLASTIC PAD CL-20-CP CL-21-CP CL-22-CP CL-23-CP

PART NO. BRASS PAD CL-30-CP CL-31-CP CL-32-CP CL-33-CP

STUD SIZE 1/4-20 5/16-18 3/8-16 1/2-13

C 5/8 7/8 1-1/4 1-1/2

G 1/4 3/8 1/2 5/8

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

H 1/8 3/16 1/4 3/8

P 11/32 1/2 5/8 3/4

R #5-40 #8-32 #10-24 1/4-20

Page 222 (Rev. 7-05)

TAPERED-NOSE CLAMP STRAPS STRAP: 300-SERIES STAINLESS STEEL SEE PAGES 65, 177-178, 181-183, AND 190 FOR OTHER MATERIAL SPECIFICATIONS CS P E 20215

Tapped-Heel Clamp Strap with a tapered nose for clamping in tight spaces. Available in stainless steel for #10-32 to 3/8-16 stud sizes.

Stainless Steel (Miniature) STRAPS — STAINLESS, MINIATURE (USA) PART NO. CL-20215 CL-20220 CL-20320 CL-20325 CL-20425 CL-20535

#10-32

1/4

1/2

1/4-20

3/8

5/8

5/16-18 3/8-16

3/8 1/2

3/4 1

D 1-1/2 2 2 2-1/2 2-1/2 3-1/2

E 11/16 15/16 15/16 1-3/16 1-5/32 1-21/32

F 19/32 27/32 13/16 1-1/16 1 1-15/32

3/8

1/8

1/4

7/32

#10-32

15/32

5/32

5/16

9/32

1/4-20

9/16 3/4

3/16 1/4

3/8 1/2

11/32 27/64

5/16-18 3/8-16

SSCA P E 3915

A complete clamp-strap assembly using one of the straps shown above. Standard assembly includes a Knurled-Head Screw. To order with a rear Clamp Rest instead, add “-1” to the part number. Example: CL-3915-1. Other lengths of Studs, Clamp Rests, and Knurled-Head Screws are available (order pieces individually).

Stainless Steel (Miniature)

Clamp Rest CL-xxxx-1

Knurled-Head Screw CL-xxxx

ASSEMBLIES — STAINLESS, MINIATURE (USA) PART NO. PART NO. THREAD WITH WITH KNURLED HEAD SCREW CLAMP REST SIZE CL-3915-1 CL-3915 #10-32 CL-3920-1 CL-3920 CL-4020-1 CL-4020 1/4-20 CL-4025-1 CL-4025 CL-4125-1 5/16-18 CL-4125 3/8-16 CL-4235-1 CL-4235

A B C E 1-1/2 1/2 1/4 19/32 2 27/32 2 5/8 3/8 13/16 2-1/2 1-1/16 2-1/2 3/4 3/8 1 3-1/2 1 1/2 1-15/32

CLAMP STRAP CL-20215 CL-20220 CL-20320 CL-20325 CL-20425 CL-20535

KNURLED HEAD SCREW

CLAMP REST

FLAT SPRING WASHER

STUD

FLANGE NUT

CL-23212 CL-13410 CL-2430.7

CL-254

CL-11415 CL-124

CL-23515 CL-13515 CL-2440.7

CL-255

CL-11520 CL-125

CL-23620 CL-13612 CL-2450.7 CL-23820 CL-13717 CL-2461.0

CL-256 CL-257

CL-11620 CL-126 CL-11725 CL-127

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 223 (Rev. 7-05)

WIDE-NOSE CLAMP STRAPS STRAP: 300-SERIES STAINLESS STEEL SEE PAGES 65, 177-178, 181-183, AND 190 FOR OTHER MATERIAL SPECIFICATIONS

CS P E 22227

Tapped-Heel Clamp Strap with an extra-wide nose. Available in stainless steel for 1/4-20 studs.

Stainless Steel (Miniature)

STRAPS — STAINLESS, MINIATURE (USA) PART NO. A B C CL-22227 1/4-20 1/4 1-1/4

D 2-3/4

E 1-5/16

F 13/16

G 3/4

H 3/4

J K L 9/32 1-3/16 1/4-20

SSCA P E 44227

Stainless Steel (Miniature) A complete clamp-strap assembly using the Clamp Strap shown above. Standard assembly includes a Knurled-Head Screw. To order with a rear Clamp Rest instead, add “-1” to the part number (CL-44227-1). Other lengths of Studs, Clamp Rests, and KnurledHead Screws are available (order pieces individually).

Knurled-Head Screw CL-xxxx

Clamp Rest CL-xxxx-1

ASSEMBLIES — STAINLESS, MINIATURE (USA) PART NO. PART NO. KNURLED WITH WITH KNURLED THREAD CLAMP HEAD HEAD SCREW CLAMP REST SIZE E A B C STRAP SCREW CL-44227-1 CL-44227 1/4-20 2-3/4 1-1/4 1/4 1-3/16 CL-22227 CL-23515

CLAMP FLAT FLANGE REST SPRING WASHER STUD NUT CL-13515 CL-2440.7 CL-255 CL-11520 CL-125

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Page 224 (Rev. 7-03)

DOUBLE-END CLAMP STRAPS STRAP: 1018 STEEL, CARBURIZED-HARDENED, BLACK OXIDE FINISH SEE PAGES 54, 61, 176-179, 181, 183 AND 189 FOR OTHER MATERIAL SPECIFICATIONS

STRAPS — STEEL PART NO. CL-23A-CS CL-23B-CS CL-23C-CS CL-23D-CS CL-23-CS CL-24-CS CL-25-CS CL-27-CS CL-28-CS CL-30-CS CL-32A-CS CL-33-CS CL-37-CS CL-38-CS CL-39-CS

Steel

Clamp strap with two clamping ends, for holding two workpieces simultaneously. Available for 1/4-20 (M6) to 3/4-10 (M20) stud sizes, each in several strap lengths.

Spherical Nut & Washer CL-xx-DEA-1

Flange Nut CL-xx-DEA-2

1/4-20 or M6

3/8

5/8

5/16-18 or M8 1/2

3/4

3/8-16 or M10 1/2 1-1/8 1/2-13 or M12 5/8 1-1/4 5/8-11 or M16 7/8 1-1/2 3/4-10 or M20

1-3/4

D 2 2-1/2 2 3 3 4 5 4 5 6 5 6 6 7 8

E 11/16 7/8 1 1-1/2 1 1-1/2 2 1-1/2 2 2-1/2 1-7/8 2-3/8 2-1/8 2-5/8 3-1/8

9/32

1/4

11/32

J 5/8 3/4

3/8

5/16

7/16

27/64

13/32

1/2

17/32

13/32

1/2

21/32

1/2

19/32

1-1/4

13/16

1/2

19/32

1-3/4

Hand Knob with Acorn Nut with Bar Knob with Spherical Washer Spherical Washer Spherical Washer* CL-xx-DEA-4 CL-xx-DEA-5 CL-xx-DEA-6

Cam Handle with Spherical Washer CL-xx-DEA-7

ASSEMBLIES — STEEL (USA) PART NO. CL-0-DEA-x CL-1-DEA-x CL-1A-DEA-x CL-1B-DEA-x CL-2-DEA-x CL-4-DEA-x CL-6-DEA-x CL-8-DEA-x CL-10-DEA-x CL-12-DEA-x CL-15-DEA-x CL-13-DEA-x CL-20-DEA-x CL-22-DEA-x CL-23-DEA-x

I BP

Steel

1/4-20

5/8

3/8

3/4

1/2

1-1/8

1/2

1-1/4

5/8

1-1/2

7/8

1-3/4

A 2 2-1/2 2 5/16-18 3 3 3/8-16 4 5 4 1/2-13 5 6 5 5/8-11 6 6 3/4-10 7 8

CLAMP STRAP CL-23A-CS CL-23B-CS CL-23C-CS CL-23D-CS CL-23-CS CL-24-CS CL-25-CS CL-27-CS CL-28-CS CL-30-CS CL-32A-CS CL-33-CS CL-37-CS CL-38-CS CL-39-CS

FLAT WASHER CL-7-FW CL-14-FW

STUD & SPRING CL-1/4-20x2.50-STUD CL-5-SPG CL-5/16-18x3.00-STUD CL-6-SPG

CL-1-FW

CL-3/8-16x3.00-STUD CL-7-SPG

CL-2-FW

CL-1/2-13x4.00-STUD CL-9-SPG CL-5/8-11x4.50-STUD CL-11-SPG

CL-3-FW CL-4-FW

CL-3/4-10x5.00-STUD CL-13-SPG

ASSEMBLIES — STEEL (METRIC) A

THREAD SIZE

I BP

A complete clamp-strap assembly using one of the straps shown above. Select any of the six nut/knob combinations shown above by adding the appropriate suffix to the part number. Other stud lengths are available (order pieces individually).

2 CLM-0-DEA-x 5/8 3/8 CL-23A-CS CL-7-FW M6 2-1/2 CL-23B-CS CLM-1-DEA-x 2 CL-23C-CS CLM-1A-DEA-x 3/4 1/2 M8 CL-14-FW 3 CL-23D-CS CLM-1B-DEA-x 3 CL-23-CS CLM-2-DEA-x 4 1-1/8 1/2 CL-24-CS M10 CLM-4-DEA-x CL-1-FW 5 CL-25-CS CLM-6-DEA-x 4 CL-27-CS CLM-8-DEA-x 5 1-1/4 5/8 CL-28-CS M12 CLM-10-DEA-x CL-2-FW 6 CL-30-CS CLM-12-DEA-x 5 CLM-15-DEA-x 1-1/2 7/8 CL-32A-CS CL-3-FW M16 6 CL-33-CS CLM-13-DEA-x 6 CL-37-CS CLM-20-DEA-x 7 1-3/4 1 CL-38-CS CLM-10-FW M20 CLM-22-DEA-x 8 CL-39-CS CLM-23-DEA-x * Available in thread sizes 3/8-16 and above (M10 and above in metric).

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

CLM-6x65-STUD CL-5-SPG CLM-8x80-STUD CL-6-SPG CLM-10x80-STUD CL-7-SPG CLM-12x95-STUD CL-9-SPG CLM-16x110-STUD CL-11-SPG CLM-20x125-STUD CL-13-SPG

NEW

Versatile Hammers Strike a B L O W at your Productivity Needs

Applications: Agricultural machinery repairs Assembly of sharp-edged work pieces Automobile assembly and repair work Car body work Carpenter's work Concrete form set-up Curbstone setting Dent removal Fence construction Gardening and landscaping Housing assembly Floor parqueting/laminating Floor tiling Foundries Furniture assembly Joiner's work Joining of workpieces Masonry work Mold construction Paving Positioning of workpieces in a vise Prefabricated-house construction Repair and maintenance work Scaffold construction Sheet-metal working Straightening work Tent and hall construction Window and door construction Wood splitting with wedge

Carr Lane/Simplex Hammers No-Rebound Hammers No-Rebound Drop Hammers No-Mar Aluminum Hammers

Design Your Own

Hammer Housings - Hammer Handles Handle: Wooden, Steel or Fiberglass Inserts in Thermoplastic, Grey Thermoplastic, Black Rubber, White Thermoplastic, Red Plastic, White Nylon, Soft Metal and Copper. (Soft, Medium Soft, Medium Hard, Hard) MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

Authorized distributor:

MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

GENERAL INFORMATION TOGGLE-ACTION PRINCIPLES: A toggle clamp is a quick-acting mechanical linkage where two of the elements make up a toggle action. Actuating the clamp first moves it into position, then applies clamping force by compressing or stretching the linkage elements after contacting the workpiece, then positively locks it by moving the toggle action’s center pivot past the centerline of the other two pivots, against a stop.

Open-arm hold-down clamps offer maximum flexibility and adjustability. Two flanged washers hold the spindle in place anywhere along the arm by tightening the jam nuts.

SOLID-ARM CLAMPS: Solid-arm hold-down clamps are easily customized to a particular application. Using the weld-on bolt retainer, you can locate the spindle permanently in one place. The solid-arm version allows mounting the spindle at an angle, or shortening the clamping arm.

1 Moving into position

2 Applying clamping force

3 Locking over center

HOLDING CAPACITY: The “holding capacity” listed for each clamp refers to the maximum external force that clamp can safely resist in its locked position without incurring any permanent deformation. For hold-down clamps, holding capacity is measured with the spindle as close as possible to the handle, and will be less at the end of the clamping arm.

TOP-GRADE MATERIALS: Carr Lane toggle clamps are made from only the finestquality materials. Steel clamps are made from various types including 1008, 1010, 1018, and other fine steels. Pivot pins on most clamp models are 400-series stainless steel for extra durability. Many pivot points have hardened steel bushings for long life. Forged steel components, such as those on toggle pliers and push/pull clamps, are made from high-carbon steel. Many push/pull-clamp bases are made of nodular iron for wear resistance.

FINISHES: Most steel clamps are zinc plated, unless otherwise noted. Virtually all clamps are also available with a black oxide finish as specials.

Spindle position for maximum capacity

Spindle position for maximum reach

CLAMPING FORCE: Clamping force, the amount of force actually applied to the workpiece by closing and locking the clamp, is generally less than the stated holding capacity. This allows the clamp to have ample capacity to resist external machining forces. Actual clamping force depends on many factors including: spindle position, proper spindle-height adjustment, spindle cushioning (uncushioned hex-head spindles provide the greatest force), workpiece material, and the clamp's mechanical advantage. In most cases, roughly 1/2 of the stated holding capacity can be applied by hand with medium effort.

OPEN-ARM CLAMPS:

STAINLESS STEEL: Many toggle-clamp models are available in 300-series stainless steel. These corrosion-resistant clamps are useful in chemical environments, plating operations, food processing, salt-spray environments, medical equipment, electronics fixturing, EDM fixturing, and marine environments. Various stainless steel grades, including 303 and 304, are used. Clamps normally furnished with a flat-cushion spindle in the steel version are supplied with a stainless steel hex-head spindle. Other clamps are available in stainless steel as specials.

AIR-POWERED CLAMPS: The air cylinders on power toggle clamps have Buna N seals, rated for operating temperatures of -20° to +200° F. Note: Zinc plating also deteriorates at temperatures above 250°F.

MANUFACTURING CO. IFC-TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

INDEX

Horizontal-Handle Hold-Down Clamps . . 3-11

Vertical-Handle Hold-Down Clamps . . . 12-32

Push / Pull Clamps . . . . . . . . . . . . . . . . 33-42

Toggle Edge Clamps . . . . . . . . . . . . . . 43-44

Latch-Action Clamps . . . . . . . . . . . . . . 45-52

Toggle Pliers . . . . . . . . . . . . . . . . . . . . . 53-57

Air-Powered Clamps. . . . . . . . . . . . . . . 58-67

Toggle Clamp Accessories................................................................................................................................68-70

MANUFACTURING CO. (Rev. 7/02)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

1TC

TOGGLE CLAMP CONVERSION CHART Reference Part No. AO-100* AO-1200* AO-200* AO-2000(HD)* AO-400* AO-800* C-800 GLBU1* GLBU1-AW-HW* GLBU3* GLBU3-AW-HW* GLBU5* GLBU5-AW-HW* GLBU6* GLBU6-AW-HW* GU1* GU1-B* GU3* GU3-B* GU5* GU5-B* GU6* GU6-B* H-100 H-200 H-200(SS) H-400* H-400(B) H-400(SS)* H-600 H-600(SS) LUP-1203 LUP-800 LUP-800-2S P-1200 P-1203 P-400* P-400-1* P-400-2* P-400-2S* P-800 P-800-2S PCH-101 PCH-101(SS) PCH-200 PH & PL-1600 S-100 S-200* S-400* T-100 T-200 T-400 V-100 V-100(SS) V-1200* V-200* V-200(SS)* V-400* V-400(SS)* VC-200* VC-400* 102111 102208 102911 105106 105203 105208* 105906 110122 201 201-B 201-SS 201-T 201208 201943 202 202-B

Carr Lane Part No.

Page No.

CL-1000-PTC CL-3000-PTC CL-1000-PTC CL-3000-PTC CL-2000-PTC CL-2000-PTC CL-850-VTC CL-111-HVTC CL-101-HVTC CL-311-HVTC CL-301-HVTC CL-511-HVTC CL-501-HVTC CL-611-HVTC CL-601-HVTC CL-120-HVTC CL-110-HVTC CL-320-HVTC CL-310-HVTC CL-520-HVTC CL-510-HVTC CL-620-HVTC CL-610-HVTC CL-250-HTC CL-350-HTC CL-350-HTC-S CL-450-HTC CL-450-HTC CL-450-HTC-S CL-550-HTC CL-550-HTC-S CL-450-PL CL-254-PL CL-254-PL-2 CL-250-PL CL-450-PL CL-50-PL CL-50-PL CL-50-PL-2 CL-50-PL-3 CL-254-PL CL-254-PL-2 CL-250-PA CL-250-PA-S CL-250-PA CL-250-PL CL-251-VTC CL-451-VTC CL-651-VTC CL-252-VTC CL-452-VTC CL-652-VTC CL-250-VTC CL-250-VTC-S CL-1050-VTC CL-453-VTC CL-450-VTC-S CL-650-VTC CL-650-VTC-S CL-350-VTC CL-550-VTC CL-3166-TW CL-832208-FC CL-3166-TW-S CL-832-TW CL-832203-SA CL-832208-FC CL-832-TW-S CL-511000-BR CL-150-VTC CL-151-VTC CL-150-VTC-S CL-152-VTC CL-316112-FC CL-316100-SA-S CL-250-VTC CL-251-VTC

61 63 61 63 62 62 17 25 23 25 23 25 23 25 23 24 24 24 25 24 24 24 24 4 6 6 7 7 7 7 7 56 55 55 55 56 54 54 54 54 55 55 51 51 51 55 14 15 16 14 15 16 14 14 18 15 15 16 16 15 16 70 70 70 70 68 68 70 70 13 13 13 13 68 68 14 14

Reference Part No. 202-SS 202-T 202-U* 202-USS 202203* 202208 202943* 205-S 205-SB 205-SL 205-SR 205-SSS 205-U 205-UB 205-UL 205-UR 205-USS 205105 205203 205943* 206-HSS* 206-SS* 207-L 207-LB* 207-S 207-SB 207-TL* 207-TS 207-TU 207-TUL* 207-U 207-UB 207-UL 207-ULB* 207105 207203 207206 207943* 210-S 210-SB 210-TS 210-TU 210-U 210-UB 210-USS 210114 210203* 210206 210208 211208* 213-U* 213-USS* 213208 213943 215-S 215-U 215-UB 215-USS 215105* 215208 215905* 217-U* 217-USS* 220 220203 220208* 225-U 225-UB 225-USS 225208 227-U* 227-USS* 227943* 228 235-U 235-UB 235-USS

Carr Lane Part No.

Page No.

CL-250-VTC-S CL-252-VTC CL-253-VTC CL-253-VTC-S CL-14200-SA CL-14112-FC CL-14112-SA-S CL-150-HTC CL-151-HTC CL-153-HTC CL-152-HTC CL-150-HTC-S CL-250-HTC CL-251-HTC CL-253-HTC CL-252-HTC CL-250-HTC-S CL-142000-BR CL-14112-SA CL-83234-SA-S CL-51-TC CL-51-TC CL-353-VTC CL-351-VTC CL-350-VTC CL-351-VTC CL-352-VTC CL-352-VTC CL-452-VTC CL-452-VTC CL-450-VTC CL-451-VTC CL-453-VTC CL-451-VTC CL-518000-BR CL-516212-SA CL-14200-SF CL-516212-SA-S CL-550-VTC CL-551-VTC CL-552-VTC CL-652-VTC CL-650-VTC CL-651-VTC CL-650-VTC-S CL-316000-BR CL-38314-SA CL-38314-SF CL-38314-CC CL-14200-CC CL-260-HTC CL-260-HTC-S CL-14200-CC CL-832203-SA-S CL-300-HTC CL-350-HTC CL-351-HTC CL-350-HTC-S CL-148-TW CL-14200-FC CL-148-TW-S CL-350-HTC CL-350-HTC-S CL-600-VTC CL-12314-SA CL-38314-CC CL-450-HTC CL-451-HTC CL-450-HTC-S CL-518208-FC CL-450-HTC CL-450-HTC-S CL-516212-SA-S CL-601-VTC CL-550-HTC CL-551-HTC CL-550-HTC-S

14 14 14 14 68 68 68 4 4 4 4 4 4 4 4 4 4 70 68 68 5 5 15 15 15 15 15 15 15 15 15 15 15 15 70 68 69 68 16 16 16 16 16 16 16 70 68 69 68 68 5 5 68 68 6 6 6 6 70 68 70 6 6 19 68 68 7 7 7 68 7 7 68 19 7 7 7

Reference Part No. 235106 235906 237-U* 237-USS* 237943* 240203* 240208* 245-S 245-U 245943* 247-S 247-SB 247-U 247-UB 247109 247110 250* 250-G 250121* 250203 250206* 258* 258-G 267 267-U 267102 301 301-SS 305-U 305-USS 305203* 305208 311 317 317-U 323* 323-MSS* 323-SS 324* 324-SS* 325 325-SS 325203* 331* 331-R* 331-R-SS* 331-SS* 334* 334-SS* 341* 341-R* 341-R-SS* 341-SS* 344* 344-SS* 345 345100 351 351-B 351-R* 351-SS 375 375-R 381 385 385-R 385102 424 424-2 424208 431208 441 441203* 462 462-2 463 468

Carr Lane Page No. Part No. CL-3811-TW CL-3811-TW-S CL-550-HTC CL-550-HTC-S CL-38314-SA-S CL-38314-SA CL-38314-FC CL-600-HTC CL-650-HTC CL-12234-SA-S CL-750-VTC CL-751-VTC CL-850-VTC CL-851-VTC CL-1213-TW CL-113000-BR CL-800-VTC CL-800-VTC CL-113000-BR CL-58438-SA CL-44-SSC CL-801-VTC CL-801-VTC CL-950-VTC CL-1050-VTC CL-5811-TW CL-150-PA CL-150-PA-S CL-200-VTC CL-200-VTC-S CL-316112-SA CL-316112-CC CL-170-PA CL-375-HTC CL-475-HTC CL-100-PA CL-100-PA-S CL-100-PA-S CL-110-PA CL-110-PA-S CL-325-PL-S CL-325-PL-S CL-12314-SA CL-200-PA CL-200-LPA CL-200-LPA-S CL-200-PA-S CL-210-PA CL-210-PA-S CL-300-PA CL-300-LPA CL-400-LPA-S CL-300-PA-S CL-310-PA CL-310-PA-S CL-345-PL CL-345-PLA CL-250-PA CL-251-PA CL-257-PA CL-250-PA-S CL-400-PA CL-400-LPA CL-350-PA CL-500-PA CL-500-LPA CL-500-PAA CL-50-PL CL-50-PL-2 CL-14208-SA CL-14100-SA CL-150-PL CL-516212-SA CL-254-PL CL-254-PL-2 CL-454-PL CL-254-PL

70 70 7 7 68 68 68 8 8 68 17 17 17 17 70 70 19 19 70 68 69 19 19 18 18 70 52 52 13 13 68 68 52 11 11 46 46 46 50 50 57 57 68 46 48 48 46 50 50 46 48 48 46 50 50 57 57 51 51 51 51 47 49 51 47 49 47 54 54 68 68 54 65 55 55 56 55

Reference Part No. 468206* 474 486* 501* 501-B* 503* 503-B* 503-LB* 505* 505-B* 505-LB* 506* 506-B* 506-LB* 507107 507206* 507208 507907 509208 527208 548* 578* 588* 601* 601-0* 601-M* 601-SS* 6015 6015-M 6015-SS 602 602-M 602-SS 603* 603-M* 604 604-M 604-SS 604106 605 605-M 607* 608 610* 610-M* 620* 620-M* 624 624-M 624-SS 628* 630 630-M 640* 640-M* 650 650-M 7-59 802* 803* 807-L* 807-LH/T* 807-UL* 807-ULH/T* 810-S* 810-U* 812* 816* 847-S* 847-U* 858* 870* 871* 902* 904*

Carr Lane Page No. Part No. CL-38314-SF CL-454-PL CL-550-PL CL-120-HVTC CL-110-HVTC CL-320-HVTC CL-310-HVTC CL-311-HVTC CL-520-HVTC CL-510-HVTC CL-511-HVTC CL-620-HVTC CL-610-HVTC CL-611-HVTC CL-51610-TW CL-516212-SF CL-516212-FC CL-51610-TW-S CL-516212-CC CL-38314-FC CL-501-HVTC CL-601-HVTC CL-601-HVTC CL-50-SPC CL-51-SPC CLM-50-SPC CL-50-SPC-S CL-100-SPC CLM-100-SPC CL-100-SPC-S CL-150-TPC CLM-150-TPC CL-150-TPC-S CL-100-PC CLM-100-PC CL-250-TPC CLM-250-TPC CL-250-TPC-S CL-250-TPCA CL-150-SPC CLM-150-SPC CL-350-SPC CL-200-PC CL-250-SPC CLM-250-SPC CL-275-SPC CLM-275-SPC CL-350-TPC CLM-350-TPC CL-350-TPC-S CL-276-SPC CL-350-SPC CLM-350-SPC CL-450-SPC CLM-450-SPC CL-650-SPC CLM-650-SPC CL-1000-VCC CL-500-PTC CL-1500-PPC CL-1001-PTC CL-1001-PTCH CL-1000-PTC CL-1000-PTCH CL-2001-PTC CL-2000-PTC CL-400-PTC CL-600-PPC CL-2001-PTC CL-2000-PTC CL-3000-PTC CL-1011-POC CL-1010-POC CL-516212-SL CL-38314-SL

69 56 54 24 24 24 24 25 24 24 25 24 24 25 70 69 68 70 68 68 23 23 23 34 34 34 34 35 35 35 39 39 39 42 42 39 39 40 40 35 35 36 42 37 37 39 39 40 40 40 39 36 36 38 38 38 38 21 59 65 61 61 61 61 62 62 59 64 62 62 63 66 66 69 69

* Functionally equivalent, but differs in some dimension and/or specification. Please check catalog before ordering.

MANUFACTURING CO. 2TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 8/05)

HORIZONTAL HANDLE

Sizes marked * are also available in stainless steel.

Standard HTC Series p. 4-8 100 lbs*

60 lbs*

200 lbs*

150 lbs*

750 lbs*

500 lbs*

1000 lbs

Most-popular and widest-range series of horizontal-handle hold-down clamps. Available in seven sizes, the smaller ones with a comfortable finger grip. Most sizes are available with either a flanged base or a straight base. Choice of solid arm, or open arm for spindle adjustment.

Automatically Adjusting p. 9 Self-adjusting clamp automatically compensates for different workpiece heights without resetting the spindle. Clamping force is always consistent after setting once.

750 lbs

TC Series p. 10

250 lbs

625 lbs

850 lbs

Simple, classic-design horizontal-handle clamps. Available in three sizes, with either a flanged base or a straight base.

Extra-Wide Opening p. 11

375 lbs

Arm opens a full 185째 for maximum loading clearance. Unique up-then-down handle motion. Handle locks at a 60째 downward angle. Dual flanged bases allow mounting on either horizontal or vertical surfaces. Choice of solid arm, or open arm for spindle adjustment.

MANUFACTURING CO. (Rev. 8/94)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

3TC

HORIZONTAL HANDLE HTC P E R 150HTC

HTCS P E R 150HTCS

Solid Arm

Open Arm

60 lbs

CL-150-HTC CL-250-HTC

Solid Arm, Flanged Base

Open Arm, Flanged Base Smallest hold-down clamp available. Choose either a solid arm, or an open arm for spindle adjustment. Arm opens 90째 while handle moves 80째. Supplied with #8-32 nylon hex-head spindle CL-832203-SA. Open-arm versions also include (2) CL-832-TW flanged washers. Shipping weight 0.1 lbs. Holding capacity:

60 lbs

CL-151-HTC

CL-152-HTC

CL-153-HTC

Solid Arm Straight Base

Solid Arm Right Flange

Solid Arm Left Flange

Also available in stainless steel . . .

CL-150-HTC-S

CL-251-HTC

CL-252-HTC

CL-253-HTC

Open Arm Straight Base

Open Arm Right Flange

Open Arm Left Flange

CL-250-HTC-S

MANUFACTURING CO. 4TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 8/98)

HORIZONTAL HANDLE LS ODE M L ONA ABLE! I T I IL ADD AVA W NO

5/8 5/32

5/8

7/16 15/16

CL-52-TC

51TC

(4) SLOTS 11/64 X 17/64 FOR #8 OR M4 SCREWS

13/16 1/2

Low Arm, Straight Base

Low Arm

TC P E R

21/64 5/8 15/16 7/32

3/16

High Arm

5/32

5/8

100 lbs Stainless Steel

7/16 5/8 15/16

5/32

1-1/8

#8-32 STAINLESS HEX-HEAD SPINDLE

7/16

VINYL GRIP 2-1/8

15/16

CL-54-TC

23/32

5/32 1-1/8 19/32

High Arm, Straight Base

CL-51-TC Low Arm, Flanged Base High Arm, Flanged Base CL-53-TC Miniature stainless steel clamp with open arm for spindle

3/64

15/32 LOW ARM

adjustment. Perfect for electronics fixturing and other lightduty application. Arm opens 90˚ while handle moves 90˚. Supplied with #8-32 stainless hex-head spindle CL-832203SA-S. Shipping weight 0.1 lbs. Holding capacity:

19/32 1-1/16

13/64 2-25/32

15/16 HIGH ARM

100 lbs

(4) HOLES 13/64 DIA FOR #10 OR M5 SCREWS 5/32

1-1/8 3/8

1-1/16 5/32

15/64

17/32

21/32

7/32 1 #10-32 FLAT CUSHION SPINDLE (HEX-HEAD SPINDLE IN STAINLESS)

VINYL GRIP 3-5/32

3/8

150 lbs 5/64

CL-260-HTC An extremely powerful clamp for its small size. Open

arm allows spindle adjustment. Arm opens 90° while handle moves 75°. Supplied with #10-32 flat-cushion spindle CL-316112-FC and (2) CL-3166-TW flanged washers. Shipping weight 0.2 lbs. Holding capacity:

1-7/16

3/4

19/32 31/32 1-15/32

5/32 4-9/16 Also available in stainless steel . . .

150 lbs CL-260-HTC-S

MANUFACTURING CO. (Rev. 2/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

5TC

HORIZONTAL HANDLE HTC P E R 350HTC

HTCS P E R 350HTCS

Solid Arm

Open Arm

200 lbs

CL-300-HTC CL-350-HTC

Solid Arm, Flanged Base

Open Arm, Flanged Base Popular medium-duty clamp. Choose either a solid arm, or an open arm for spindle adjustment. Arm opens 86˚ while handle moves 60˚. Supplied with 1/4-20 short flat-cushion spindle CL-14112-FC. Solid-arm version supplied with CL-142000-BR bolt retainer. Open-arm version supplied with (2) CL-147-TW flanged washers. Shipping weight 0.3 lbs. Holding capacity:

200 lbs

Also available in stainless steel . . .

CL-351-HTC Open Arm Straight Base

CL-350-HTC-S

MANUFACTURING CO. 6TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 8/97)

HORIZONTAL HANDLE HTC P E R 450HTC

HTCS P E R 450HTCS

500 lbs

CL-451-HTC Straight Base

CL-450-HTC

Flanged Base Strong-yet-compact horizontal-handle clamp, with open arm for spindle adjustment. Arm opens 90째 while handle moves 65째. Supplied with 5/16-18 short flat-cushion spindle CL-518208-FC and (2) CL-51610-TW flanged washers. Shipping weight 0.6 lbs. Holding capacity: 500 lbs

Also available in stainless steel . . .

CL-450-HTC-S

HTC P E R 550HTC

HTCS P E R 550HTCS

750 lbs

CL-551-HTC Straight Base

CL-550-HTC

Flanged Base Heavy-duty clamp with open arm for spindle adjustment. Arm opens 90째 while handle moves 55째. Supplied with 3/8-16 flat-cushion spindle CL-38314-FC and (2) CL-3811-TW flanged washers. Shipping weight 1.5 lbs.

Also available in stainless steel . . .

Holding capacity:

CL-550-HTC-S

750 lbs

CL-551-HTC-S

MANUFACTURING CO. (Rev. 12/04)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

7TC

HORIZONTAL HANDLE HTC P E R 650HTC 9/16 3/8 1/8

BOLT RETAINER CL-113000-BR

7/8 1-5/8

Solid Arm

Open Arm

1000 lbs

CL-600-HTC Solid Arm CL-650-HTC Open Arm Largest and strongest horizontal-handle hold-down clamp. Choose either a solid arm, or an open arm for spindle adjustment. Arm opens a wide 105˚ while handle moves 75˚. Supplied with 1/2"-13 hex-head spindle CL-12314-SA. Solid-arm version supplied with a CL-113000-BR bolt retainer. Open-arm version supplied with (2) CL-1213-TW flanged washers. Shipping weight 3.3 lbs. Holding capacity:

1000 lbs

MANUFACTURING CO. 8TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 12/04)

HORIZONTAL HANDLE

750 lbs Automatic Toggle Clamp (Self Adjusting)

CL-550-AHTC

Automatic Toggle Clamp Automatically adjusts for different workpiece thicknessess! Clamps with the same, repeatable force anywhere within its 1/2" automatic-adjustment range. Perfect for welding fixtures, machining fixtures for castings, fixtures holding several part sizes within the same family, or any other application where part size can vary. Easy to use. To set up, simply adjust the contact spindle to the average workpiece height, and set desired clamping force once. After that, operate just like a standard toggle clamp. The patented adjusting mechanism does the rest. Clamping force is always consistent. The clamp’s toggle action ensures that workpieces will remain clamped even under severe vibration. No additional spindle adjustment is ever needed. The clamp even compensates for wear in long production runs. Fits in the same space, and provides the same clamping force as a standard toggle clamp. A maximum of 250 to 500 lbs clamping force (depending on spindle position) can be applied by hand. Arm opens 87° while handle moves 80°. Supplied with 3/8-16 radius spindle CL-38200-RS and (2) CL-3811-TW flanged washers. Patent no. 4,407,493. Other patents pending. Shipping weight 1.9 lbs. Holding capacity:

750 lbs

Low Limit –1/4"

HIgh Limit +1/4"

MANUFACTURING CO. (Rev. 8/98)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

9TC

HORIZONTAL HANDLE TC P E R 151TC

850 lbs 625 lbs 250 lbs

Classic-design horizontal-handle clamps with open arm for spindle adjustment. Arm opens 90째 while handle moves 90째. Available in three sizes.

CL-151-TC Flanged Base Smallest-size clamp. Accepts any #10-32 spindle and (2) CL3166-TW flanged washers. For fixed spindle location, use a 1/4-20 spindle and a CL-1458-S bolt retainer. See pages 6870 to order. Shipping weight 0.4 lbs. Holding capacity: 250 lbs

CL-251-TC Flanged Base Medium-size clamp. Accepts any 1/4-20 spindle and (2) CL-148TW flanged washers. For fixed spindle location, use a CL-1458-S bolt retainer. See pages 68-70 to order. Shipping weight 0.5 lbs. Holding capacity: 625 lbs

CL-351-TC Flanged Base Largest-size clamp. Accepts any 5/16-18 spindle and (2) CL51610-TW flanged washers. For fixed spindle location, use a CL-51658-S bolt retainer. See pages 68-70 to order. Shipping weight 1.4 lbs. Holding capacity: 850 lbs

CL-151-TC (Top dimension) CL-251-TC (Middle dimension) CL-351-TC (Bottom dimension)

CL-152-TC

CL-252-TC

CL-352-TC

Straight Base 250 lbs

Straight Base 625 lbs

Straight Base 850 lbs

MANUFACTURING CO. 10TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/02)

HORIZONTAL HANDLE HTC P E R 375HTC

Open Arm

Solid Arm Open Arm

Solid Arm

375 lbs

CL-375-HTC Solid Arm CL-475-HTC Open Arm Extra-wide-opening clamp with handle that locks at a downward angle. Unique up-then-down handle motion opens arm a full 185째. Dual flanged bases allow mounting on either horizontal or vertical surfaces. Available with a solid arm, or an open arm for spindle adjustment. Accepts all 5/16-18 spindles . . . see pages 68-69 to order. Solidarm version supplied with a CL-518000-BR bolt retainer. Open-arm version supplied with (2) CL-51610-TW flanged washers. Shipping weight 0.8 lbs. Holding capacity:

375 lbs

Unique up-then-down handle action

MANUFACTURING CO. (Rev. 7/02)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

11TC

VERTICAL HANDLE

Sizes marked * are also available in stainless steel

Wide Opening

100 lbs*

150 lbs*

200 lbs*

500 lbs*

750 lbs*

1000 lbs

1200 lbs

pp. 13-18 Clamping arm opens past 90째 for excellent loading clearance. Most-popular and widest-range series of vertical-handle hold-down clamps. Choice of flanged or straight base, solid or open arm, and regular or T handle in most of the seven available sizes.

Angle Arm

750 lbs

p. 19 Clamps with arm tilted upward for increased clearance underneath. Also useful for applying clamping force at an angle. Wide-opening solid arm. Choice of flanged base or straight base. Available in two sizes.

1000 lbs

Automatically Adjusting p. 20 Self-adjusting clamp automatically compensates for different workpiece heights without resetting the spindle. Clamping force is always consistent. Wide opening.

750 lbs

Cam Action p. 21 Wide-opening clamp that locks by spiral-cam action rather than toggle action. Solid arm, flanged base.

1000 lbs

Heavy-Duty Automotive Type

750 lbs

2000 lbs

3000 lbs

pp. 22-25 Heavy-duty production clamps designed for extreme durability. Available either as complete clamps or as basic mechanisms for adding custom clamping arms or handles. Choice of four sizes.

6000 lbs

Low Arm

100 lbs* 250 lbs

625 lbs

850 lbs

2500 lbs

5000 lbs

pp. 26-27, 30 Simple, easy-opening clamps with excellent arm reach. Extends farther over workpiece than any clamp its size. Choice of flanged or straight base, and solid or open arm. Arm opens 83째. Available in six sizes, the largest two forged.

5000 lbs

pp. 28-29, 31 Simple, easy-opening clamps with extra arm height. Choice of flanged or straight base, and solid or open arm. Arm opens 83째. Available in six sizes, the largest two forged.

High Arm

100 lbs*

250 lb

625 lbs

850 lbs

2500 lbs

MANUFACTURING CO. 12TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 11/95)

VERTICAL HANDLE VTC P E R 150VTC

VTCS P E R

CL-151-VTC

150VTCS

Straight Base

100 lbs

CL-150-VTC

CL-152-VTC Flanged Base T Handle

Also available in stainless steel . . .

Also available air powered . . .

CL-150-VTC-S

CL-400-PTC (page 59)

Flanged Base

Smallest wide-opening hold-down clamp. Open arm allows spindle adjustment. Arm opens 100째 while handle moves 56째. Supplied with #10-32 flat-cushion spindle CL316112-FC and (2) CL-3166-TW flanged washers. Shipping weight 0.2 lbs. Holding capacity: 100 lbs

VTC P E R 200VTC

VTCS P E R 200VTCS

150 lbs

CL-200-VTC

T Handle

Miniature hold-down clamp with a unique finger-grip T handle. Open arm allows spindle adjustment. Arm opens 92째 while handle moves 175째. Supplied with #10-32 flatcushion spindle CL-316112-FC and (2) CL-3166-TW flanged washers. Shipping weight 0.2 lbs. Holding capacity:

150 lbs

Also available in stainless steel . . .

CL-200-VTC-S

MANUFACTURING CO. (Rev. 7/02)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

13TC

VERTICAL HANDLE VTC P E R 250VTC

VTCS P E R 250VTCS

Solid Arm

Long Open Arm

200 lbs

CL-250-VTC CL-253-VTC

Solid Arm, Flanged Base Long Open Arm, Flanged Base

Small-yet-powerful clamp available in several configurations. Choose either a solid arm, or a long open arm for spindle adjustment. Arm opens 117째 while handle moves 69째. Supplied with 1/4-20 short flat-cushion spindle CL-14112-FC. Open-arm version supplied with (2) CL-148-TW flanged washers. Shipping weight 0.4 lbs. Holding capacity:

200 lbs

Also available in stainless steel . . .

CL-250-VTC-S

CL-253-VTC-S

Also available air powered . . .

CL-251-VTC

CL-252-VTC

Solid Arm Straight Base

Solid Arm Flanged Base T Handle

CL-500-PTC (page 60)

MANUFACTURING CO. 14TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 2/05)

VERTICAL HANDLE VTC P E R 350VTC

VTCS P E R 450VTCS

Solid Arm

Open Arm

500 lbs

CL-350-VTC CL-450-VTC

Solid Arm, Flanged Base Open Arm, Flanged Base

Most-popular wide-opening clamp available in many configurations. Choose either a solid arm, or an open arm for spindle adjustment (extra-long arms also available). Arm opens 100째 while handle moves 60째. Accepts any 5/16-18 short spindle . . . see pages 68-69 to order. Solid-arm versions supplied with a CL-518000-BR bolt retainer. Open-arm versions supplied with (2) CL-51610-TW flanged washers. Shipping weight 0.8 lbs. Holding capacity: 500 lbs Also available in stainless steel . . .

CL-450-VTC-S

CL-351-VTC

CL-352-VTC

CL-353-VTC

Solid Arm Straight Base

Solid Arm Flanged Base T Handle

Long Solid Arm Flanged Base

Also available air powered . . .

CL-1001-PTC Solid Arm (page 61)

CL-451-VTC

CL-452-VTC

CL-453-VTC

Open Arm Straight Base

Open Arm Flanged Base T Handle

Long Open Arm Flanged Base

CL-1000-PTC Open Arm (page 61)

MANUFACTURING CO. (Rev. 12/04)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

15TC

VERTICAL HANDLE VTC P E R 550VTC

VTCS P E R 650VTCS

Open Arm

Solid Arm

750 lbs

CL-550-VTC CL-650-VTC

Solid Arm, Flanged Base Open Arm, Flanged Base

Larger wide-opening clamp available in several configurations. Choose either a solid arm, or an open arm for spindle adjustment. Arm opens 106째 while handle moves 58째. Accepts any 3/8-16 spindle . . . see pages 68-69 to order. Solid-arm version supplied with a CL-316000-BR bolt retainer. Open-arm version supplied with (2) CL-3811-TW flanged washers. Shipping weight 1.3 lbs. Holding capacity:

750 lbs

CL-551-VTC

CL-552-VTC

Solid Arm Straight Base

Solid Arm Flanged Base T Handle

Also available with patented automatic adjustment!

CL-650-ATC (page 20) Also available in stainless steel . . .

CL-651-VTC Open Arm Straight Base

CL-652-VTC Open Arm Flanged Base T Handle

CL-650-VTC-S

MANUFACTURING CO. 16TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 12/04)

VERTICAL HANDLE VTC P E R 750VTC

Solid Arm

Open Arm

1000 lbs

CL-750-VTC CL-850-VTC

Solid Arm, Flanged Base Open Arm, Flanged Base

Extra-large wide-opening clamp. Choose either a solid arm, or an open arm for spindle adjustment. Arm opens 120˚ while handle moves 67˚. Accepts any 1/2-13 spindle . . . see pages 68-69 to order. Solid-arm version supplied with a CL-113000-BR bolt retainer. Open-arm version supplied with (2) CL-1213-TW flanged washers. Shipping weight 2.5 lbs. Holding capacity:

1000 lbs

Also available air powered . . .

CL-2001-PTC Solid Arm (page 62)

CL-751-VTC

CL-851-VTC

Solid Arm Straight Base

Open Arm Straight Base

CL-2000-PTC Open Arm (page 62)

MANUFACTURING CO. (Rev. 12/04)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

17TC

VERTICAL HANDLE VTC P E R 950VTC

Solid Arm

Open Arm

1200 lbs

CL-950-VTC CL-1050-VTC

Solid Arm Open Arm

Largest wide-opening clamp available. Choose either a solid arm, or an open arm for spindle adjustment. Arm opens 140째 while handle moves 70째. Accepts any 5/8-11 spindle . . . see pages 68-69 to order. Solid-arm version supplied with a CL-511000-BR bolt retainer. Open-arm version supplied with (2) CL-5811-TW flanged washers. Shipping weight 5.2 lbs. Holding capacity:

1200 lbs

MANUFACTURING CO. 18TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/02)

VERTICAL HANDLE

750 lbs Angled Arm

CL-601-VTC Straight Base with Bracket

BRACKET INCLUDED WITH CL-601-VTC

CL-600-VTC Flanged Base Angled-arm clamp provides increased clearance underneath arm. Also useful for applying clamping force at an angle. Solid arm opens 113째 while handle moves 66째. Accepts any 3/8-16 spindle . . . see pages 68-69 to order. Supplied with a CL-316000-BR bolt retainer. Straight-base

version has a longer handle and includes a separate base to allow mounting at any angle. Shipping weight 1.0 to 1.5 lbs. Holding capacity: 750 lbs

VTC P E R 800VTC

1000 lbs Angled Arm

CL-801-VTC Straight Base with Bracket

CL-800-VTC Larger-size angled-arm clamp.

Flanged Base Solid arm opens 126째 while handle moves 76째. Accepts any 5/8-11 spindle. . .see pages 68-69 to order. Supplied with a CL-511000-BR bolt retainer. Straight-base version includes a separate base to allow mounting at any angle. Shipping weight 2.5 to 2.8 lbs. Holding capacity: 1000 lbs

BRACKET INCLUDED WITH CL-801-VTC

MANUFACTURING CO. (Rev. 12/04)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

19TC

VERTICAL HANDLE

ATC P E R 650ATC

750 lbs Automatic Toggle Clamp (Self Adjusting)

CL-650-ATC Automatic Toggle Clamp Automatically adjusts for different workpiece thicknesses! Clamps with the same force anywhere within its adjustment range (1-1/4"). Perfect for welding fixtures, machining fixtures for castings, fixtures holding several part sizes within the same family, or any other application where part size can vary. Easy to use. To set up, simply adjust the contact spindle to the average workpiece height, and set desired clamping force. After that, operate just like a standard toggle clamp. The patented adjusting mechanism does the rest. Clamping force is always consistent. The clamp’s toggle action ensures that workpieces will remain clamped even under severe vibration. No additional spindle adjustment is ever needed. The clamp even compensates for wear in long production runs. Fits in the same space, and provides the same clamping force as a standard toggle clamp. A maximum of 250 to 500 lbs clamping force (depending on spindle position) can be applied by hand. Arm opens 106° while handle moves 58°. Supplied with 3/8-16 radius spindle CL-38314-RS and (2) CL-3811-TW flanged washers. Patent no. 4,407,493. Other patents pending. Shipping weight 1.9 lbs. Holding capacity: 750 lbs

Low Limit

Average Setting

High Limit

MANUFACTURING CO. 20TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 8/98)

VERTICAL HANDLE VCC P E R 1000VCC

1000 lbs Cam Action

CL-1000-VCC Wide-opening clamp that locks by cam action rather than toggle action. Smooth spiral cam locks securely anywhere within a 3/16-inch clamping range. Rugged cast-steel components are flame hardened at all wear points. Solid arm can be tapped to accept a spindle, or otherwise modified. Shipping weight 2.5 lbs. Holding capacity:

1000 lbs

Optional Vinyl Grip CL-3-HVTC-G

Low Limit

Average Setting

High Limit

MANUFACTURING CO. (Rev. 2/98)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

21TC

VERTICAL HANDLE

6000 lbs

3000 lbs

2000 lbs

750 lbs

Complete Clamp Flanged Base Heavy-duty automotive-type production clamps designed for extreme durability. The above configuration includes a long horizontal clamping arm with an attached bolt retainer, a vertical handle with vinyl grip, and an integral flanged base (see pages 23-25 for other versions). Precision, close-tolerance steel components throughout provide exceptionally smooth operation. Rugged alloy steel handle fork. Guided-arm feature provides positive lateral arm support. All pivot pins are hardened and ground, running in either hardened bushings or the close-tolerance holes of hardened parts. The bottom pivot is a precision bolt which can be adjusted, if desired, to fine tune the amount of free play. These clamps are built to withstand abuse. With just occasional lubrication, they will provide extremely long service life. Black oxide finish. Available in four sizes.

CL-100-HVTC

Complete Clamp, Flanged Base

Smallest of the four sizes, yet still quite powerful. Cast alloy steel base and slotted open clamping arm on this size only. Arm opens 130° while handle moves 90°. Accepts any 1/4-20 spindle…see pages 68-69 to order. Supplied with (2) CL-148-TW flanged washers. Shipping weight 1.0 lbs.

Holding capacity:

750 lbs

CL-300-HVTC Complete Clamp, Flanged Base Solid arm opens 180° while handle moves 120°. Accepts any 1/2-13 spindle…see pages 68-69 to order. Shipping weight 2.8 lbs.

Holding capacity:

2000 lbs

CL-500-HVTC Complete Clamp, Flanged Base Solid arm opens 180° while handle moves 125°. Accepts any 1/2-13 spindle…see pages 68-69 to order. Shipping weight 4.3 lbs.

Holding capacity:

3000 lbs

CL-600-HVTC Complete Clamp, Flanged Base Our most-powerful hold-down toggle clamp. Solid arm opens 195° while handle moves 130°. Accepts any 5/8-11 spindle…see pages 68-69 to order. Shipping weight 9.1 lbs.

Holding capacity:

6000 lbs

PART NO. COMPLETE CLAMP

C DIA

CL-100-HVTC CL-300-HVTC CL-500-HVTC CL-600-HVTC

.236 .394 .472 .630

4.45 8.46 9.84 11.61

.50 .75 .87 .98

.197 .197 .236 .315

.26 .52 .52 .64

1.54 1.97 2.36 2.95

.35 1.57 1.97 2.36

.49 .75 .75 1.00

.236 .394 .394 .472

.748 .984 1.181 1.575

1.260 1.969 2.362 2.953

1.22 1.77 1.97 2.48

1.73 1/4 or M6 .55 .59 2.64 5/16 or M8 .91 1.18 3.46 5/16 or M8 .98 1.18 4.13 3/8 or M10 1.38 1.50

.59 .98 .87 1.89 1.02 2.28 1.26 2.76

.98 1.89 2.32 2.95

.59 .98 .98 1.57

1.26 2.13 2.40 3.31

1.54 2.52 2.92 3.98

3.31 .51 4.87 1.10 5.66 1.42 7.43 1.81

.87 1.72 2.19 2.76

MANUFACTURING CO. 22TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/02)

VERTICAL HANDLE

6000 lbs

3000 lbs

2000 lbs

750 lbs

Complete Clamp Straight Base Heavy-duty automotive-type production clamps designed for extreme durability. The above configuration includes a long horizontal clamping arm furnished with a bolt retainer (not welded on), a vertical handle with vinyl grip, and a straight base for plate/tongue mounting at any angle (see pages 22, 24, and 25 for other versions). Precision, close-tolerance steel components throughout provide exceptionally smooth operation. Rugged alloy steel handle fork. Guided-arm feature provides positive lateral arm support. All pivot pins are hardened and ground, running in either hardened bushings or the close-tolerance holes of hardened parts. The bottom pivot is a precision bolt which can be adjusted, if desired, to fine tune the amount of free play. These clamps are built to withstand abuse. With just occasional lubrication, they will provide extremely long service life. Black oxide finish. Available in four sizes.

CL-101-HVTC

Complete Clamp, Straight Base

Smallest of the four sizes, yet still quite powerful. Cast alloy steel slotted open clamping arm on this size only. Arm opens 205° while handle moves 130°. Accepts any 1/4-20 spindle…see pages 68-69 to order. Supplied with (2) CL-148-TW flanged washers. Shipping weight 0.9 lbs.

Holding capacity:

750 lbs

CL-301-HVTC

Complete Clamp, Straight Base

Solid arm opens 205° while handle moves 130°. Accepts any 1/2-13 spindle…see pages 68-69 to order. Shipping weight 2.5 lbs.

Holding capacity:

2000 lbs

CL-501-HVTC

Complete Clamp, Straight Base

Solid arm opens 195° while handle moves 130°. Accepts any 1/2-13 spindle…see pages 68-69 to order. Shipping weight 4.0 lbs.

Holding capacity:

Base Plate (order separately) CL-1-HVTC-P (750 lbs) CL-3-HVTC-P (2000 lbs) CL-5-HVTC-P (3000 lbs) CL-6-HVTC-P (6000 lbs)

3000 lbs

CL-601-HVTC

Complete Clamp, Straight Base

Our most-powerful hold-down toggle clamp. Solid arm opens 195° while handle moves 130°. Accepts any 5/8-11 spindle…see pages 68-69 to order. Shipping weight 8.3 lbs.

Holding capacity:

6000 lbs

PART NO. COMPLETE CLAMP

C DIA

CL-101-HVTC CL-301-HVTC CL-501-HVTC CL-601-HVTC

.236 .394 .472 .630

5.08 9.25 10.87 12.60

.50 .75 .87 .98

.118 .197 .236 .315

.26 .52 .52 .64

1.54 1.97 2.36 2.95

.35 1.57 1.97 2.36

.49 .75 .75 1.00

.236 .295 .394 .394

.748 .984 1.181 1.772

1.260 1.378 1.575 1.969

1.06 1.77 1.97 2.48

1.10 1.57 1.97 2.56

.79 1.26 1.50 1.97

1.73 1.97 2.36 2.76

#10 or M5 .55 1/4 or M6 .91 5/16 or M8 .98 5/16 or M8 1.38

.59 1.18 1.18 1.50

.59 .87 1.02 1.26

1.61 2.76 3.35 3.94

1.61 2.76 3.39 4.13

.59 .98 .98 1.57

1.26 2.13 2.40 3.31

1.54 2.52 2.92 3.98

3.31 4.87 5.66 7.43

1.14 1.97 2.48 2.99

1.50 2.59 3.25 3.94

.236 .315 .315 .315

MANUFACTURING CO. (Rev. 3/04)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

23TC

VERTICAL HANDLE

6000 lbs

3000 lbs

2000 lbs

750 lbs

Basic Mechanism Pivot Base Heavy-duty automotive-type production clamps designed for extreme durability. The above configuration is a basic toggle mechanism onto which an arm and handle can be welded at any desired angle (see pages 22, 23, and 25 for other versions). The pivot base must be welded to both the clamp mechanism and the fixture, or the optional base plate, after setting the clamp at the proper angle. Precision, close-tolerance steel components throughout provide exceptionally smooth operation. Rugged alloy steel handle fork. Guided-arm feature provides positive lateral arm support. All pivot pins are hardened and ground, running in either hardened bushings or the close-tolerance holes of hardened parts. The bottom pivot is a precision bolt which can be adjusted, if desired, to fine tune the amount of free play. These clamps are built to withstand abuse. With just occasional lubrication, they will provide extremely long service life. Black oxide finish. Available in four sizes.

Weld clamp mechanism to pivot base at any desired angle.

CL-110-HVTC Basic Mechanism, Pivot Base Smallest of the four sizes, yet still quite powerful. Arm opens 205° while handle moves 130°. Shipping weight 0.6 lbs. To order basic mechanism without the pivot base, specify part no. CL-120-HVTC.

Holding capacity:

Clamping Arm (order separately)

750 lbs

Base Plate (order separately)

CL-310-HVTC Basic Mechanism, Pivot Base Arm opens 205° while handle moves 130°. Shipping weight 1.6 lbs. To order basic mechanism without the pivot base, specify part no. CL-320-HVTC.

Holding capacity:

2000 lbs

CL-510-HVTC

Basic Mechanism, Pivot Base

Handle Vinyl Grip (order separately) (order separately) ACCESSORIES

Arm opens 195° while handle moves 130°. Shipping weight 2.9 lbs. To order basic mechanism without the pivot base, specify part no. CL-520-HVTC.

Holding capacity:

3000 lbs

CL-610-HVTC

Basic Mechanism, Pivot Base

Our most-powerful hold-down toggle clamp. Arm opens 195° while handle moves 130°. Shipping weight 6.4 lbs. To order basic mechanism without the pivot base, specify part no. CL-620-HVTC.

Holding capacity: PART NO. BASIC MECHANISM

CL-110-HVTC CL-310-HVTC CL-510-HVTC CL-610-HVTC

.236 .394 .472 .630

4.33 8.07 9.49 10.91

6000 lbs

C B2 DIA 2.60 4.49 5.47 6.97

.50 .75 .87 .98

.118 .197 .236 .315

.39 .55 .75 .87

2.76 2.97 4.06 5.16

1.14 .472 1.57 .787 2.24 .984 2.83 1.181

J .197 .295 .394 .394

PART NO. CLAMPING ARM CL-1-HVTC-A CL-3-HVTC-A CL-5-HVTC-A CL-6-HVTC-A

CLAMP SIZE 750 lbs 2000 lbs 3000 lbs 6000 lbs

.709 .984 .71 1.10 .79 1.38 .984 1.378 1.14 1.57 1.26 1.97 1.181 1.575 1.50 1.97 1.54 2.36 1.772 1.969 2.05 2.56 1.97 2.76

P #10 or M5 1/4 or M6 5/16 or M8 5/16 or M8

PART NO. BASE PLATE CL-1-HVTC-P CL-3-HVTC-P CL-5-HVTC-P CL-6-HVTC-P

.55 .630 .94 .35 .91 .984 1.79 .57 .98 1.181 2.64 .75 1.38 1.378 3.33 1.02

PART NO. VINYL GRIP CL-1-HVTC-G CL-3-HVTC-G CL-5-HVTC-G CL-6-HVTC-G

PART NO. HANDLE CL-1-HVTC-H CL-3-HVTC-H CL-5-HVTC-H CL-6-HVTC-H

1.02 1.71 2.17 2.74

1.30 2.11 2.68 3.43

4.06 .39 .75 5.08 .79 1.41 6.74 1.10 1.87 8.59 1.30 2.24

Z .236 .315 .315 .315

MANUFACTURING CO. 24TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 6/05)

VERTICAL HANDLE

6000 lbs

3000 lbs

2000 lbs

750 lbs

Basic Mechanism Straight Base Heavy-duty automotive-type production clamps designed for extreme durability. The above configuration is a basic toggle mechanism onto which an arm and handle can be welded at any desired angle (see pages 22-24 for other versions). The straight base is ideal for plate/tongue mounting at any angle. Alternatively, the optional base plate can be attached to construct a tall flanged-base clamp. Precision, close-tolerance steel components throughout provide exceptionally smooth operation. Rugged alloy steel handle fork. Guided-arm feature provides positive lateral arm support. All pivot pins are hardened and ground, running in either hardened bushings or the close-tolerance holes of hardened parts. The bottom pivot is a precision bolt which can be adjusted, if desired, to fine tune the amount of free play. These clamps are built to withstand abuse. With just occasional lubrication, they will provide extremely long service life. Black oxide finish. Available in four sizes.

Straight-base clamps are ideal for welding onto plates.

CL-111-HVTC Basic Mechanism, Straight Base Smallest of the four sizes, yet still quite powerful. Arm opens 205° while

Clamping Arm (order separately)

Base Plate (order separately)

Handle (order separately)

Vinyl Grip (order separately)

handle moves 130°. Shipping weight 0.8 lbs.

Holding capacity:

750 lbs

CL-311-HVTC Basic Mechanism, Straight Base Arm opens 205° while handle moves 130°. Shipping weight 1.8 lbs. Holding capacity:

2000 lbs

CL-511-HVTC

Basic Mechanism, Straight Base

Arm opens 195° while handle moves 130°. Shipping weight 3.2 lbs.

Holding capacity:

ACCESSORIES

3000 lbs

CL-611-HVTC

CLAMP SIZE 750 lbs 2000 lbs 3000 lbs 6000 lbs

Basic Mechanism, Straight Base

Our most-powerful hold-down toggle clamp. Arm opens 195° while handle moves 130°. Shipping weight 7.1 lbs.

Holding capacity: PART NO. BASIC MECHANISM

CL-111-HVTC CL-311-HVTC CL-511-HVTC CL-611-HVTC

.236 .394 .472 .630

5.08 9.25 10.87 12.60

6000 lbs

C B2 DIA 3.39 5.67 6.97 8.66

.50 .75 .87 .98

.118 .197 .236 .315

.39 .55 .75 .87

2.52 2.56 3.82 4.61

1.14 .472 1.57 .787 2.24 .984 2.83 1.181

J .197 .295 .394 .394

.709 .984 1.06 1.10 .79 1.38 .984 1.378 1.77 1.57 1.26 1.97 1.181 1.575 1.97 1.97 1.50 2.36 1.772 1.969 2.48 2.56 1.97 2.76

PART NO. CLAMPING ARM CL-1-HVTC-A CL-3-HVTC-A CL-5-HVTC-A CL-6-HVTC-A

P #10 or M5 1/4 or M6 5/16 or M8 5/16 or M8

PART NO. BASE PLATE CL-1-HVTC-P CL-3-HVTC-P CL-5-HVTC-P CL-6-HVTC-P

.55 .630 1.73 .59 .91 .984 2.97 .98 .98 1.181 4.02 .98 1.38 1.378 5.02 1.57

PART NO. VINYL GRIP CL-1-HVTC-G CL-3-HVTC-G CL-5-HVTC-G CL-6-HVTC-G

PART NO. HANDLE CL-1-HVTC-H CL-3-HVTC-H CL-5-HVTC-H CL-6-HVTC-H

1.26 2.13 2.40 3.31

1.54 2.52 2.92 3.98

4.06 5.08 6.74 8.59

1.18 1.97 2.48 2.99

1.54 2.59 3.25 3.94

.236 .315 .315 .315

MANUFACTURING CO. (Rev. 6/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

25TC

VERTICAL HANDLE TC P E R 11TC

850 lbs Low Open Arm

625 lbs Low Open Arm

250 lbs

CL-11-TC

Low Open Arm

100 lbs Low Open Arm Stainless

Simple, easy-opening clamps with excellent arm reach, extending farther over workpiece than any other clamps their size. Open arm allows spindle adjustment (see p. 27 for solidarm version). Arm opens 83째 while handle moves 83째. Available in four sizes.

CL-11-TC Low Open Arm, Flanged Base Miniature clamp in stainless steel. Supplied with #8-32 hexhead spindle CL-832203-SA-S. Shipping weight 0.1 lbs. Holding capacity: 100 lbs

CL-111-TC Low Open Arm, Flanged Base Small-size clamp. Accepts any 1/4-20 spindle and (2) CL-147TW flanged washers . . . see pages 68-70 to order. Shipping weight 0.3 lbs. Holding capacity: 250 lbs

CL-211-TC

Low Open Arm, Flanged Base Medium-size clamp. Accepts any 5/16-18 spindle and (2) CL51610-TW flanged washers . . . see pages 68-70 to order. Shipping weight 0.5 lbs. Holding capacity: 625 lbs

CL-311-TC

Low Open Arm, Flanged Base Large-size clamp. Arm extends a full 6 inches over workpiece. Accepts any 3/8-16 spindle and (2) CL-3811-TW flanged washers . . . see pages 68-70 to order. Shipping weight 1.4 lbs. Holding capacity: 850 lbs

CL-111-TC (Top dimension) CL-211-TC (Middle dimension) CL-311-TC (Bottom dimension)

CL-112-TC

CL-212-TC

CL-312-TC

Low Open Arm Straight Base 250 lbs

Low Open Arm Straight Base 625 lbs

Low Open Arm Straight Base 850 lbs

MANUFACTURING CO. 26TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/02)

VERTICAL HANDLE TC P E R 113TC

850 lbs Low Solid Arm

625 lbs Low Solid Arm

250 lbs

Low Solid Arm

Simple, easy-opening clamps with excellent arm reach, extending farther over workpiece than any other clamps their size. Solid arm for weld-on bolt retainers (see p. 26 for openarm version). Arm opens 83째 while handle moves 83째. Available in three sizes.

CL-113-TC

Low Solid Arm, Flanged Base Small-size clamp. Accepts any 1/4-20 spindle and a CL-1458-S bolt retainer . . . see pages 68-70 to order. Shipping weight 0.3 lbs. Holding capacity: 250 lbs

CL-213-TC

Low Solid Arm, Flanged Base Medium-size clamp. Accepts any 5/16-18 spindle and a CL51658-S or CL-518000-BR bolt retainer . . . see pages 68-70 to order. Shipping weight 0.5 lbs. Holding capacity: 625 lbs

CL-313-TC

Low Solid Arm, Flanged Base Large-size clamp. Arm extends a full 6 inches over workpiece. Accepts any 3/8-16 spindle and a CL-3878-S or CL-316000-BR bolt retainer . . . see pages 68-70 to order. Shipping weight 1.4 lbs. Holding capacity: 850 lbs

CL-113-TC (Top dimension) CL-213-TC (Middle dimension) CL-313-TC (Bottom dimension)

CL-114-TC

CL-214-TC

CL-314-TC

Low Solid Arm Straight Base 250 lbs

Low Solid Arm Straight Base 625 lbs

Low Solid Arm Straight Base 850 lbs

MANUFACTURING CO. (Rev. 7/02)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

27TC

VERTICAL HANDLE TC P E R 21TC

850 lbs High Open Arm

625 lbs High Open Arm

250 lbs

CL-21-TC

High Open Arm

100 lbs High Open Arm Stainless Steel

Simple, easy-opening clamps with extra arm height. Open arm allows spindle adjustment (see p. 29 for solid-arm version). Arm opens 83째 while handle moves 83째. Available in four sizes.

CL-21-TC

High Open Arm, Flanged Base Miniature clamp in stainless steel. Supplied with #8-32 hexhead spindle CL-832203-SA-S. Shipping weight 0.1 lbs. Holding capacity: 100 lbs

CL-101-TC High Open Arm, Flanged Base Small-size clamp. Accepts any 1/4-20 spindle and (2) CL-147TW flanged washers . . . see pages 68-70 to order. Shipping weight 0.3 lbs. Holding capacity: 250 lbs

CL-201-TC

High Open Arm, Flanged Base Medium-size clamp. Accepts any 5/16-18 spindle and (2) CL51610-TW flanged washers . . . see pages 68-70 to order. Shipping weight 0.5 lbs. Holding capacity: 625 lbs

CL-301-TC

High Open Arm, Flanged Base Large-size clamp. Accepts any 3/8-16 spindle and (2) CL3811-TW flanged washers . . . see pages 68-70 to order. Shipping weight 1.4 lbs. Holding capacity: 850 lbs

CL-101-TC (Top dimension) CL-201-TC (Middle dimension) CL-301-TC (Bottom dimension)

CL-102-TC

CL-202-TC

CL-302-TC

High Open Arm Straight Base 250 lbs

High Open Arm Straight Base 625 lbs

High Open Arm Straight Base 850 lbs

MANUFACTURING CO. 28TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/02)

VERTICAL HANDLE TC P E R 103TC

850 lbs High Solid Arm

625 lbs High Solid Arm

250 lbs High Solid Arm

Simple, easy-opening clamps with extra arm height. Solid arm for weld-on bolt retainers (see p. 28 for open-arm version). Arm opens 83째 while handle moves 83째. Available in three sizes.

CL-103-TC

High Solid Arm, Flanged Base Small-size clamp. Accepts any 1/4-20 spindle and a CL-1458S bolt retainer . . . see pages 68-70 to order. Shipping weight 0.3 lbs. Holding capacity: 250 lbs

CL-203-TC

High Solid Arm, Flanged Base Medium-size clamp. Accepts any 5/16-18 spindle and a CL-51658-S or CL-518000-BR bolt retainer . . . see pages 6870 to order. Shipping weight 0.5 lbs. Holding capacity: 625 lbs

CL-303-TC

High Solid Arm, Flanged Base Large-size clamp. Accepts any 3/8-16 spindle and a CL-3878S or CL-316000-BR bolt retainer . . . see pages 68-70 to order. Shipping weight 1.4 lbs. Holding capacity: 850 lbs

CL-103-TC (Top dimension) CL-203-TC (Middle dimension) CL-303-TC (Bottom dimension)

CL-104-TC

CL-204-TC

CL-304-TC

High Solid Arm Straight Base 250 lbs

High Solid Arm Straight Base 625 lbs

High Solid Arm Straight Base 850 lbs

MANUFACTURING CO. (Rev. 7/02)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

29TC

VERTICAL HANDLE (4) HOLES 11/32 DIA FOR 5/16 OR M8 SCREWS

HDC P E R 51HDC121

1-3/4 2-1/4

5/8 1/4

2-1/4

1-3/4

5-7/8

1/2 13/16

5000 lbs

9/16 1

Low Arm

25/32 4-5/8

3/8 1-5/32

Low Arm

CL-50-HDC-121

Compact heavy-duty clamps with forged steel handles and clamping arms, available in two sizes. Low clamping arm extends far over workpiece. Also available with other arm/handle configurations . . . see pages 31 and 32. Simple, easy-opening linkage with hardened bushings at all pivot points. Arm opens 83째 while handle moves 83째. Weld-on flanged base is optional. To order clamp with flanged base attached, add "S" to part no. (example: CL-50-HDC-121S).

(4) HOLES 11/32 DIA FOR 5/16 OR M8 SCREWS 2 2-3/4

3/4 3/8

2 2-3/4

CL-50-HDC-121

Low Arm Smaller of the two sizes, yet still quite powerful. Shipping weight 2.5 lbs. Holding capacity:

2500 lbs

CL-51-HDC-121 Low Arm Larger of the two sizes. Shipping weight 5.0 lbs. Holding capacity:

1-1/8

6-7/32

2500 lbs

5/16 5/8

5000 lbs

6-3/4

5/8 1 1-5/16

3/4 3/8

1-1/32

3/8

1-17/32 1-3/8

6-19/32 7-9/32

3/4

4-3/8

CL-51-HDC-121 Available with standard flanged base attached . . .

Standard flanged base available separately . . .

Add "S" to part no.

CL-0-HDCSB (2500 lbs) CL-1-HDCSB (5000 lbs)

MANUFACTURING CO. 30TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 6/05)

VERTICAL HANDLE 2-1/2

HDC P E R

(4) HOLES 11/32 DIA FOR 5/16 OR M8 SCREWS 1-3/4 2-1/4

5/8 1/4

2-1/4

60HDC211

1-3/4

1/2 13/16 2-7/32

1-7/16

5000 lbs High Arm

3/4 2 2-3/4

5/8 7-13/16

1-3/4 3/8

CL-60-HDC-211 High Arm Smaller of the two sizes, yet still quite powerful. Shipping

3/8 5/8 3/4

6 7-17/32

weight 2.5 lbs. 2500 lbs

CL-61-HDC-211

High Arm Larger of the two sizes. Shipping weight 5.0 lbs.

Standard flanged base available separately . . .

5000 lbs

Add “S” to part no.

1-3/8

6-7/16

Available with standard flanged base attached . . .

CL-61-HDC-211

Holding capacity:

2-3/4

1-1/4

5-15/32

2 3/8

Compact heavy-duty clamps with forged steel handles and clamping arms, available in two sizes. High clamping arm provides extra room for thick workpieces (also see angled arm below). Also available with other arm/handle configurations . . . see pages 30 and 32. Simple, easy-opening linkage with hardened bushings at all pivot points. Arm opens 83° while handle moves 83°. Weld-on flanged base is optional. To order clamp with flanged base attached, add “S” to part no. (example: CL-60-HDC-211S).

5/8

CL-60-HDC-211 (4) HOLES 11/32 DIA FOR 5/16 OR M8 SCREWS

3-7/8

2500 lbs

Holding capacity:

5/16

1/2 1/4 4-1/8 5-5/16

High Arm

6-13/32

CL-0-HDCSB (2500 lbs) CL-1-HDCSB (5000 lbs)

4-1/2 Also available air powered . . .

1-3/16

1-1/2

CL-60-HDC-111

CL-61-HDC-111

Angled Arm 2500 lbs

Angled Arm 5000 lbs

CL-3000-PTC (page 63)

MANUFACTURING CO. (Rev. 6/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

31TC

VERTICAL HANDLE Custom heavy-duty forged clamps built to your specifications, with the same features as the clamps shown on pages 30 and 31. Available in two sizes. Choose from the 32 configurations shown below. (Top part no. is for 2500-lb clamp, 13/16 45 1 bottom part no. is for 5000-lb clamp). Simple, easy-opening linkage with hardened bushings at all pivot points. Arm 1-3/16 opens 83° while handle moves 83°. Weld-on flanged base is 1-1/2 optional. To order clamp with flanged base attached, add “S” to part no. (example: CL-50-HDC-111S). For locking in open position, specify third digit as “2” instead of “1” (example: 1-7/16 CL-50-HDC-112 instead of -111). 1-3/4

CL-50-HDC-XXX CL-60-HDC-XXX

3 4-1/2

Low Arm

1-3/16 1-1/2

5 6 1/2 5/8 1-29/32 2-17/32

1-1/8 1-3/8

5/8 3/4 1-3/4 2-1/4 2-1/4 2-3/4

High Arm

Smaller of the two sizes, yet still quite powerful. Shipping weight 2.5 lbs. Holding capacity: 2500 lbs

CL-51-HDC-XXX CL-61-HDC-XXX

Low Arm High Arm

Larger of the two sizes. Shipping weight 5.0 lbs. Holding capacity:

9/16 3/4 5-25/32 6-29/32

5/16 3/8

5000 lbs

Low Arm

1-3/4 2-1/4

1-5/8 2-1/8 2-1/4 2-3/4

HDC P E R 50HDC111

CL-50/60-HDC-XXX (Top dimension) CL-51/61-HDC-XXX (Bottom dimension)

High Arm

CL-50-HDC-111 CL-51-HDC-111

CL-50-HDC-311 CL-51-HDC-311

CL-60-HDC-111 CL-61-HDC-111

CL-60-HDC-311 CL-61-HDC-311

CL-50-HDC-121 CL-51-HDC-121

CL-50-HDC-321 CL-51-HDC-321

CL-60-HDC-121 CL-61-HDC-121

CL-60-HDC-321 CL-61-HDC-321

CL-50-HDC-131 CL-51-HDC-131

CL-50-HDC-331 CL-51-HDC-331

CL-60-HDC-131 CL-61-HDC-131

CL-60-HDC-331 CL-61-HDC-331

CL-50-HDC-141 CL-51-HDC-141

CL-50-HDC-341 CL-51-HDC-341

CL-60-HDC-141 CL-61-HDC-141

CL-60-HDC-341 CL-61-HDC-341

CL-50-HDC-211 CL-51-HDC-211

CL-50-HDC-411 CL-51-HDC-411

CL-60-HDC-211 CL-61-HDC-211

CL-60-HDC-411 CL-61-HDC-411

CL-50-HDC-221 CL-51-HDC-221

CL-50-HDC-421 CL-51-HDC-421

CL-60-HDC-221 CL-61-HDC-221

CL-60-HDC-421 CL-61-HDC-421

CL-50-HDC-231 CL-51-HDC-231

CL-50-HDC-431 CL-51-HDC-431

CL-60-HDC-231 CL-61-HDC-231

CL-60-HDC-431 CL-61-HDC-431

CL-50-HDC-241 CL-51-HDC-241

CL-50-HDC-441 CL-51-HDC-441

CL-60-HDC-241 CL-61-HDC-241

CL-60-HDC-441 CL-61-HDC-441

MANUFACTURING CO. 32TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 6/05)

PUSH / PULL LSO A W NO LE B A L I AVA RIC! T IN ME

Sizes marked * are also available in stainless steel

Standard SPC Series p. 34-38 300 lbs*

100 lbs*

800 lbs

300 lbs

Most popular series of push/pull clamps. Plunger advances and locks by moving the handle forward toward it. Clamp can also be used for pulling instead of pushing (handle locks back in downward position also). Choice of seven sizes.

5000 lbs

2500 lbs

16000 lbs

Horizontal Handle p. 39 Reverse-action push clamp. Plunger advances and locks by moving the handle backward into horizontal position.

600 lbs

Threaded Body p. 40-41

200 lbs*

300 lbs*

700 lbs

Compact push/pull clamps for mounting through panels, plates, or angle brackets. Install in a drilled or tapped hole. Plunger locks in either extended or retracted position. Rotate clamp to position handle anywhere within 360째. Choice of three sizes.

PC Series p. 42

500 lbs

850 lbs

1500 lbs

Durable push/pull clamps with nodular iron bases. Plunger advances and locks by moving the handle forward toward it. Clamp can also be used for pulling instead of pushing (handle locks back in downward position also). Choice of three sizes.

MANUFACTURING CO. (Rev. 7/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

33TC

PUSH / PULL SPC P E R 50SPC

SPCS P E R 50SPCS

(3) HOLES 11/64 DIA FOR #8 OR M4 SCREWS

3/8

Tapped Plunger 1/4 DIA

5/8 1-1/16 7/16 DIA 5/8

5/16

1-5/16

Externally Threaded Plunger TAPPED #8-32 X 1/2 DEEP

100 lbs

1/4 RADIUS

1-25/32

5/8 TRAVEL 1-5/16

CL-50-SPC

5/8

(Metric No. CLM-50-SPC) 3/32

Tapped Plunger

1-7/32

1-9/32 2-19/32

CL-51-SPC Externally Threaded Plunger Miniature plunger clamp, perfect for electronics fixturing and other light-duty applications. Locks in extended or retracted position. 5/8" plunger travel. Tapped-plunger version supplied with #8-32 nylon hex-head spindle CL-832203-SA (M4 in metric). Also available with 1/4-20 externally threaded plunger. Shipping weight 0.2 lbs. Holding capacity:

100 lbs

Also available in stainless steel . . .

Also available air powered . . .

CL-50-SPC-S

CL-600-PPC (page 64)

CL-51-SPC Externally Threaded Plunger

MANUFACTURING CO. 34TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/05)

PUSH / PULL

300 lbs

CL-100-SPC (Metric No. CLM-100-SPC) Tiny, yet extremely powerful plunger clamp with a forged

Also available in stainless steel . . .

steel base. Requires very little mounting space due to its narrow base and compact low profile. Locks in extended or retracted position. 5/8" plunger travel. Plunger is tapped to accept any 1/4-20 spindle (M6 in metric) . . . see pages 6869 to order. Shipping weight 0.5 lbs. Holding capacity:

CL-100-SPC-S

300 lbs

SPC P E R

(4) HOLES 13/64 DIA FOR #10 OR M5 SCREWS 1-5/8

1/4

150SPC

5/8 DIA 7/16 DIA

2-3/16

9/32

25/32

1-3/8 2-11/16

4-1/32

TAPPED 5/16-18 1" DEEP

300 lbs

9/16 RADIUS

1-1/4 TRAVEL

1/8

3-11/32

3/4

CL-150-SPC

(Metric No. CLM-150-SPC) Medium-size plunger clamp that locks in extended or retracted position. 1-1/4" plunger travel. Plunger is tapped to accept any 5/16-18 spindle (M8 in metric) . . . see pages 68-69 to order. Shipping weight 0.7 lbs. Holding capacity: 300 lbs

1/8 3-1/16

2-1/16 5-7/16

MANUFACTURING CO. (Rev. 7/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

35TC

PUSH / PULL SPC P E R 250SPC

800 lbs

CL-250-SPC (Metric No. CLM-250-SPC) Heavier clamp with extra plunger height. Locks in extended or retracted position. 1-5/8" plunger travel. Plunger is tapped to accept any 3/8-16 spindle (M10 in metric) . . . see pages 68-69 to order. Shipping weight 1.9 lbs. Holding capacity:

800 lbs

ING DED T ! S W U NE -ADJ G-LOA SELF SPRIN 1-1/4 DIA 1-27/32 H WIT GER!3/4 DIA N PLU 5/16

SPC P E R 255SPC

(4) HOLES 11/32 DIA FOR 5/16" OR M8 SCREWS 1-5/8 2-1/4 1-5/8 2-1/4

21/32

5-3/4

1/4

1-5/8 MAX TRAVEL

.20" CLAMPING RANGE

200 lbs Spring Force

4-9/16

1-3/4

CL-255-SPC Spring-loaded version of

1/4

CL-250-SPC above. Heavier clamp with extra plunger height. Locks in extended position only. 1-5/8" maximum plunger travel with a .20" clamping range. Patent number 6,905,116. Shipping weight 1.9 lbs. Spring force (Âą10%):

3-7/8

2-9/16 6-3/4

200 lbs

MANUFACTURING CO. 36TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/05)

PUSH / PULL SPC P E R 350SPC

2500 lbs

CL-350-SPC (Metric No. CLM-350-SPC) Compact heavy-duty plunger clamp with an extremely low profile. Rugged forged steel base. Locks in extended or retracted position. 2" plunger travel. Plunger is tapped to accept any 3/8-16 spindle (M10 in metric) . . . see pages 68-69 to order. Shipping weight 2.0 lbs. Holding capacity:

2500 lbs

A government that is large enough to supply everything you need is large enough to take everything you have. Thomas Jefferson

MANUFACTURING CO. (Rev. 7/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

37TC

PUSH / PULL SPC P E R 450SPC

(6) HOLES 13/32 DIA FOR 3/8 OR M10 SCREWS 2-1/8 7/8 DIA

3-9/16

11/16

8-1/2 1/2-13 THREAD 51 DEEP

5000 lbs

11/16 RADIUS

7-3/4

4" TRAVEL

9/16

4-13/16

1-1/4 3/8

5-5/16

CL-450-SPC (Metric No. CLM-450-SPC) Extra-heavy-duty clamp features a full 4" plunger travel!

12-11/16

Rugged nodular iron base and a 7/8"-diameter plunger combine to handle the toughest clamping jobs. Locks in extended or retracted position. Plunger is tapped to accept any 1/2-13 spindle (M12 in metric) . . . see pages 68-69 to order. Shipping weight 7.0 lbs. Holding capacity:

5000 lbs

13/32 DIA 4 HOLES FOR 3/8 OR M10 SCREWS

2 1-3/8

2-1/4 3-1/4 1 DIA 15/16

2-3/4

31/32

4-7/16 1/2

5/8-11 THREAD X 2 DEEP

6-7/8

3 TRAVEL 4-13/16

16000 lbs 1/4

CL-650-SPC (Metric No. CLM-650-SPC) Strongest plunger clamp available. Handle and base are made

2-1/4

5-3/8

5-5/16 11-5/32

of alloy steel. Precision unit with snap-ring pivot pins to allow removing the plunger even after the clamp is mounted. Locks in extended or retracted position. 3" plunger travel. Plunger is tapped to accept any 5/8-11 spindle (M16 in metric). . . see pages 68-69 to order. Shipping weight 5.7 lbs. Holding capacity:

16000 lbs

MANUFACTURING CO. 38TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/05)

PUSH / PULL (4) HOLES 11/32 DIA FOR 5/16" OR M8 SCREWS 1-5/8 2-1/4 1/2

1-7/8

Horizontal Handle

5/8 DIA

1/4

1-1/16 DIA 5/16

1-5/8 2-1/4

TAPPED 3/8"-16 X 1 DEEP

600 lbs CL-276-SPC Straight Base with Bracket

1-3/8 TRAVEL

7-1/16 2-1/4

1-3/4 1/4

3-5/8

2-1/2 11-7/8

CL-275-SPC

(Metric No. CLM-275-SPC) Similar to CL-250-SPC except with reverse handle action. Plunger advances and locks by moving handle backward into horizontal position. 1-3/16" plunger travel. Plunger is tapped to accept any 3/8-16 spindle (M10 in metric) . . . see pages 68-69 to order. Straight-base version supplied with separate base bracket to allow mounting clamp at an angle. Shipping weight 1.5 lbs. Holding capacity:

Bracket included with CL-276-SPC

600 lbs

Horizontal Handle

ING DED T ! S W U NE -ADJ G-LOA SELF SPRIN H WIT GER! N PLU 1-7/8 3/4 DIA

(4) HOLES 11/32 DIA FOR 5/16" OR M8 SCREWS 1-5/8 2-1/4 1/2 1/4

1-1/16 DIA 5/16

1-5/8 2-1/4

200 lbs Spring Force 16000 lbs

.20" CLAMPING RANGE

CL-285-SPC Spring-loaded version of CL-275-SPC above. Plunger advances and locks by moving handle backward into horizontal position. 3/4" maximum plunger travel with a .20" clamping range. Patent number 6,905,116. Shipping weight 1.5 lbs. Spring force (Âą10%):

3/4 TRAVEL

7-1/16 2-1/4

1-3/4 1/4

3-13-16

2-1/2 12-1/16

200 lbs

MANUFACTURING CO. (Rev. 7/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

39TC

PUSH / PULL TPC P E R 150TPC

TPCS P E R 150TPCS

700 lbs CL-150-TPC

300 lbs

200 lbs

Compact plunger clamps for mounting through panels, plates, or angle brackets. Install in a drilled or tapped hole, securing with the locknut provided. Plunger locks in either extended or retracted position. Rotate clamp to position handle anywhere within 360째. Choice of three sizes. (Metric No. CLM-150-TPC) CL-150-TPC Small-size clamp with 3/4" plunger travel. Installs in a 5/8"-

CL-250-TPC

diameter drilled hole, or a 5/8-18 tapped hole (M16x1.5 in metric). Accepts any 1/4-20 spindle (M6 in metric). . . see pages 68-69 to order. Shipping weight 0.4 lbs. Holding capacity: 200 lbs (Metric No. CLM-250-TPC) CL-250-TPC Medium-size clamp with 1-1/2" plunger travel. Installs in a 3/4"diameter drilled hole, or a 3/4-16 tapped hole (M20x1.5 in metric). Accepts any 5/16-18 spindle (M8 in metric). . . see pages 68-69 to order. Shipping weight 0.7 lbs. Holding capacity: 300 lbs (Metric No. CLM-350-TPC) CL-350-TPC Large-size clamp with 2-5/8" plunger travel. Installs in a 1"diameter drilled hole, or a 1"-14 (M27x2 in metric) tapped hole. Accepts any 3/8-16 spindle (M10 in metric). . . see pages 68-69 to order. Shipping weight 1.5 lbs. Holding capacity: 700 lbs Mounting Bracket for CL-250-TPC . . .

CL-350-TPC Also available in stainless steel . . .

CL-250-TPCA

CL-150-TPC-S 200 lbs

CL-250-TPC-S 300 lbs

CL-350-TPC-S 700 lbs

MANUFACTURING CO. 40TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/05)

PUSH / PULL NG DED I T ! S NEW -ADJU G-LOA SELF SPRIN H WIT GER! N PLU 200 lbs Spring Force 3/4-16 THREAD

100 lbs Spring Force

1-1/4

5/8 DIA

1/4 3/4-16 THREAD 5/8

3/4

1/4 Compact plunger clamps for mounting through panels, plates, .20" or angle brackets. Install in a drilled or tapped hole, securing 7/16 CLAMPING RANGE with the locknut provided. Plunger locks only in extended position. Rotate clamp to position handle anywhere within 360°. 2-3/16 7/8 Patent number 6,905,116. Choice of two sizes. SQUARE

1/8

3-13/16

1-1/2 MAX TRAVEL

1-27/32 4-1/4 3/4

360 HANDLE ROTATION HANDLE POSITION WITH PLUNGER RETRACTED

CL-255-TPC Medium-size clamp with 1-1/2" maximum plunger travel and a

CL-255-TPC

.20" clamping range. Installs in a 3/4"-diameter drilled hole, or a 3/4-16 tapped hole. Shipping weight 0.7 lbs. Spring force (±10%): 100 lbs

1"-14 THREAD 3/4 DIA

CL-355-TPC Large-size clamp with 2-5/8" maximum

1-1/2 7/8

1-7/8

15/16

4-13/16 5/16

Mounting Bracket for CL-255-TPC . . .

3/16

1"-14 THREAD

1/4

plunger travel and a .20" clamping range. Installs in a 1"-diameter drilled hole, or a 1"-14 tapped hole. Shipping weight 1.5 lbs. Spring force (±10%): 200 lbs

13/16

2-5/8 MAX TRAVEL .20" CLAMPING RANGE

1-1/4 SQUARE

3-5/8 6-11/16

360 HANDLE ROTATION

1-5/16

HANDLE POSITION WITH PLUNGER RETRACTED

CL-355-TPC

CL-250-TPCA

MANUFACTURING CO. (Rev. 6/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

41TC

PUSH / PULL SPC P E R 100PC

1500 lbs

CL-100-PC 850 lbs

500 lbs

Durable plunger clamp with nodular iron base. Locks in either extended or retracted position. Choice of three sizes.

CL-100-PC

(Metric No. CLM-100-PC)

Small-size clamp with 1-3/16" plunger travel. Accepts any 5/16-18 spindle (M8 in metric). . . see pages 68-69 to order. Shipping weight 0.9 lbs. Holding capacity: 500 lbs

CL-200-PC

(Metric No. CLM-200-PC)

CL-200-PC

Medium-size clamp with 1-5/8" plunger travel. Accepts any 3/8-16 spindle (M10 in metric). . . see pages 68-69 to order. Shipping weight 1.4 lbs. Holding capacity: 850 lbs

CL-300-PC

(Metric No. CLM-300-PC)

Large-size clamp with 2-11/32" plunger travel. Accepts any 1/2-13 spindle (M12 in metric). . . see pages 68-69 to order. Shipping weight 3.2 lbs. Holding capacity: 1500 lbs Also available air powered . . .

CL-1500-PPC 850 lbs (page 65)

CL-300-PC

MANUFACTURING CO. 42TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/05)

TOGGLE EDGE CLAMPS

Automatically Adjusting p. 44 Unique Toggle Edge Clamp applies force forward and downward at the same time. This quick-acting, self-adjusting clamp automatically compen-sates for variations in workpiece size. Clamping force is always consistent after setting once.

750 lbs

MANUFACTURING CO. (Rev. 7/02)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

43TC

TOGGLE EDGE CLAMPS

Toggle Edge Clamps apply force forward and downward at the same time.

750 lbs Automatic Toggle Clamp (Self Adjusting) (4) HOLES 21/64 DIA FOR 5/16 OR M8 SCREWS

CL-550-ATEC

2-3/8

Automatic Toggle Edge Clamp

15/16

1-5/8 9/16

Unique Toggle Edge Clamp applies force forward and downward at the same time. Automatically adjusts for different workpiece sizes. Clamps with the same, repeatable force anywhere within its 9/32" automatic-adjustment range.

5/16

1-1/4 2-1/16

Easy to use. Simply set desired clamping force once, after mounting, then operate just like a standard toggle clamp. The patented adjusting mechanism does the rest. For mounting on T-slotted tables, see slotted adapters below. Hardened clamping nose grips workpiece firmly to apply downthrust force. Handle moves 80째 while nose pivots back for loading. Patent no. 4,407,493. Other patents pending. Shipping weight 1.8 lbs. Holding capacity: 750 lbs

ADJUSTMENT SCREW FOR SETTING FORCE VINYL GRIP 8-1/4 1-13/32 MAX CLEARANCE HEIGHT 3-1/8

1-1/4 1-1/8 MAX MIN 5/8 5/16 1-15/16

9/32" Automatic-Adjustment Range

9/32

7-11/16 9/32 MAX CLAMPING RANGE

1-23/32

For slotted adaptors see p. 65MF

MANUFACTURING CO. 44TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 6/05)

LATCH ACTION

Sizes marked * are also available in stainless steel

Adjustable U Bolt p. 46-49 Latch-action clamp with a threaded U bolt for adjustability. Supplied with matching latch plate (smallest three sizes). Large, comfortable handle grip. Available in five sizes. 360 lbs*

700 lbs*

2000 lbs*

4000 lbs

7500 lbs

Right-Angle Adjustable U Bolt p. 50 Similar to the latch clamp above, except with its pulling direction perpendicular to the base. Supplied with matching latch plate. Large, comfortable handle grip. Available in three sizes. 500 lbs*

1000 lbs*

2000 lbs*

Adjustable Hook

375 lbs*

1000 lbs

p. 51 Popular hook-type latch clamp. Hook is threaded at one end for easy adjustment. Base rotates 90째 to allow horizontal or vertical latching. Available in two sizes.

Fixed Length

375 lbs*

1200 lbs

p. 52 Latch clamp with fixed reach for installation where no length adjustment is required. Adjustable stop allows latching at different heights. Available in two sizes.

MANUFACTURING CO. (Rev. 7/02)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

45TC

LATCH ACTION 13/16

25/64

(6) HOLES 11/64 DIA FOR #8 OR M4 SCREWS

7/32

1-7/64

33/64

100PA

PAS P E R

1/2 13/64 5/8 3/4 U-BOLT & 1-1/32 HOLE SPACING 1-3/16 DRAWING MOVEMENT 25/64 ADJUSTMENT 7/32 41/64

2000 lbs

PA P E R

100PAS

1-5/32

15/32

5/64 #8-32 THREAD (5/32 DIA U-BOLT)

15/32 MIN 2-15/16 3-7/16

1/16

CL-100-PA

700 lbs 1 9/16

360 lbs

7/32

(4) HOLES 17/64 DIA FOR 1/4 OR M6 SCREWS 1 U-BOLT SPACING

11/16

Versatile latch clamp with a threaded U bolt for adjustability. Supplied with matching latch plate. Large, comfortable handle grip. Available in three sizes (also see page 47 for two larger sizes).

3/4

(2) HOLES 7/32 DIA FOR #10 OR M5 SCREWS

3/4

1/4

1-1/4 HOLE SPACING

1-9/16 2 DRAWING ADJUSTMENT 3/8 ADJUSTMENT #10-24 THREADS 19/64 (3/16 DIA U-BOLT) 1

CL-100-PA Miniature latch clamp with high holding capacity.

1-21/32

1-3/16inch drawing movement. Threaded U bolt allows a 25/64inch adjustment range. Shipping weight 0.2 lbs. Holding capacity: 360 lbs

21/32 15/32 MIN 4-21/32 5-1/8 MIN CL-200-PA

7/64

CL-200-PA Medium-size latch clamp with 2-inch drawing movement. Threaded U bolt allows a 3/8-inch adjustment range. Shipping weight 0.4 lbs. Holding capacity: 700 lbs

1-1/2 3/4

CL-300-PA Heavy-duty latch clamp.

7/64

(6) HOLES 11/32 DIA FOR 5/16 OR M8 SCREWS 1-3/4 U-BOLT SPACING

3/8

1 2-1/8

1-3/16

Well-suited for applications such as plastic molding. 2-1/2-inch drawing movement. Threaded U bolt allows a 15/16-inch adjustment range. Shipping weight 1.5 lbs. Holding capacity: 2000 lbs

3/8

1-5/8

1-1/2 HOLE SPACING 2-3/8 2-1/2 DRAWING MOVEMENT 15/16 ADJUSTMENT 1-41/64 13/32 5/16-18 THREAD (5/16 DIA U-BOLT)

Also available in stainless steel. . .

2-13/16

15/16 9/64 CL-100-PA-S 360 lbs

CL-200-PA-S 700 lbs

CL-300-PA-S 2000 lbs

3/4 MIN 7-3/16 8 MIN

9/64

CL-300-PA

MANUFACTURING CO. 46TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 9/04)

LATCH ACTION (8) HOLES 13/32 DIA FOR 3/8" OR M10 SCREWS 2-1/4 1-3/8 7/16

Optional Latch Plate CL-500-PAA

1-5/8 U-BOLT SPACING

3-1/8 2-1/4

3-1/8

9/16

2-1/4 HOLE SPACING 2-1/4 3-3/8 2-7/16 DRAWING MOVEMENT 3/4 ADJUSTMENT 1-31/32

4000 lbs

1-1/8 7/16

CL-400-PA Heavier-duty version of

the latch clamps on page 44. Strong enough to resist the high expansion forces generated in polyurethane molds. Rugged alloy steel base and latch plate (order latch plate separately). Threaded U bolt allows a 3/4-inch adjustment range. 2-7/16" drawing movement. Shipping weight 2.8 lbs. Holding capacity: 4000 lbs

Optional Latch Plate CL-500-PAA

3/8"-16 THREAD (3/8 DIA U-BOLT)

3/8 1 MIN 8-3/8 9-13/32 MIN

OPTIONAL LATCH PLATE (ORDER SEPARATELY)

LSO SS! A 1-3/8 NOW TAINLE IN S 3-1/8

(8) HOLES 13/32 DIA FOR 3/8 OR M10 SCREWS 2-1/4 2-1/8 U-BOLT SPACING

7/16

3-1/8

2-1/4

9/16

1-1/8 ADJUSTMENT

2-1/4 2-1/4 HOLE SPACING 3-3/8 1-3/8 MIN DRAWING MOVEMENT 1-1/2 1 1/2-13 THREAD (1/2 DIA U-BOLT)

7500 lbs

1-1/8

7/16

OPTIONAL LATCH PLATE (ORDER SEPARATELY)

CL-500-PA Strongest latch clamp available. Alloy steel handle pro-

vides even greater strength than the CL-400-PA above, yet with a more-compact overall size. Rugged alloy steel base and latch plate (order latch plate separately). Threaded U bolt allows a 1-1/8-inch adjustment range. 13/8" drawing movement. Shipping weight 3.3 lbs. Holding capacity: 7500 lbs

3-3/4

1 MIN 7-19/32 8-11/16 MIN

3/8

Also available in stainless steel... CL-500-PA-S (Clamp)

CL-500-PAA-S (Latch Plate)

MANUFACTURING CO. (Rev. 9/04)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

47TC

LATCH ACTION H O ALS LE WIT W NO AILAB LOCK! AV FETY SA

Optional Safety Lock (Press lever to unlock) (2) HOLES 7/32 DIA FOR #10 OR M5 SCREWS (4) HOLES 17/64 DIA FOR 1/4 OR M6 SCREWS 7/32

2000 lbs

9/16

11/16

3/4

1/4

700 lbs

3/4 1-9/16

1-3/4

1 U-BOLT SPACING 1-1/4 HOLE SPACING

2 DRAWING MOVEMENT 3/8 ADJUSTMENT #10-24 THREADS 19/64 (3/16 DIA U-BOLT) 1

Same as our latch clamps on page 46 (two largest sizes) except with our new safety-lock feature. This safety lock automatically engages when the clamp is closed, then remains locked until manually disengaged by pressing the lever before opening. This prevents the latch clamp from being accidentally opened by bumping the handle.

1-21/32 21/32 LOCK 15/32 MIN 4-21/32 5-1/8 MIN

7/64

Versatile latch clamp with a threaded U bolt for adjustability. Supplied with matching latch plate. Large, comfortable handle grip. Available in two sizes (also see page 49 for two larger sizes).

7/64

CL-200-LPA

With Safety Lock Medium-size latch clamp with 2-inch drawing movement. Threaded U bolt allows a 3/8-inch adjustment range. Shipping weight 0.4 lbs. Holding capacity: 700 lbs

(6) HOLES 11/32 DIA FOR 5/16 OR M8 SCREWS

1-1/2

1-3/4 U-BOLT SPACING

3/8

1 2-1/8

1-3/16

CL-300-LPA

With Safety Lock Heavy-duty latch clamp. Well-suited for applications such as plastic molding. 2-1/2-inch drawing movement. Threaded U bolt allows a 15/16-inch adjustment range. Shipping weight 1.5 lbs. Holding capacity: 2000 lbs

3/8

1-5/8

1-1/2 HOLE SPACING

2-3/8 2-1/2 DRAWING MOVEMENT 15/16 ADJUSTMENT 1-41/64 13/32

Also available in stainless steel. . .

5/16-18 THREAD 2-13/16 (5/16 DIA U-BOLT)

15/16 9/64

CL-200-LPA-S 700 lbs

CL-300-LPA-S 2000 lbs

3/4 MIN

LOCK 7-3/16 8 MIN

9/64

CL-300-LPA

MANUFACTURING CO. 48TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 9/04)

LATCH ACTION Optional Latch Plate CL-500-PAA

LSO LE WITH! A NOW AILAB LOCK AV FETY (8) HOLES 13/32 DIA SA FOR 3/8" OR M10 SCREWS 2-1/4 1-3/8

7/16

1-5/8 U-BOLT SPACING

3-1/8 2-1/4

3-1/8

9/16

2-1/4 HOLE SPACING 2-1/4 3-3/8 2-7/16 DRAWING MOVEMENT 3/4 ADJUSTMENT

4000 lbs

1-31/32

CL-400-LPA With Safety Lock Same as our latch clamps on page 47 except with our new

safety-lock feature. This safety lock automatically engages when the clamp is closed, then remains locked until manu- 1-1/8 7/16 ally disengaged by pressing the lever before opening. This prevents the latch clamp from being accidentally opened by bumping the handle. Rugged alloy steel base and latch plate (order latch plate separately). Threaded U bolt allows a 3/4-inch adjustment range. 2-7/16" drawing movement. Shipping weight 2.8 lbs. Holding capacity: 4000 lbs

Optional Latch Plate CL-500-PAA

3/8"-16 THREAD (3/8 DIA U-BOLT)

3/8 1 MIN

8-3/8 9-13/32 MIN

OPTIONAL LATCH PLATE (ORDER SEPARATELY)

LSO LE WITH! A NOW AILAB LOCK 1-3/8 AV FETY SA 3-1/8

LOCK

(8) HOLES 13/32 DIA FOR 3/8 OR M10 SCREWS 2-1/4 2-1/8 U-BOLT 7/16 SPACING

3-1/8

2-1/4

2-1/4 3-3/8 1-3/8 DRAWING MOVEMENT 1-1/2

9/16

1-1/8 ADJUSTMENT

2-1/4 HOLE SPACING

1 1/2-13 THREAD (1/2 DIA U-BOLT)

7500 lbs

1-1/8

7/16

OPTIONAL LATCH PLATE (ORDER SEPARATELY)

CL-500-LPA With Safety Lock Same as our latch clamps on page 47 except with our new safety-lock feature. This safety lock automatically engages when the clamp is closed, then remains locked until manually disengaged by pressing the lever before opening. This prevents the latch clamp from being accidentally opened by bumping the handle. Rugged alloy steel base and latch plate (order latch plate separately). Threaded U bolt allows a 1-1/8-inch adjustment range. 1-3/8" drawing movement. Shipping weight 3.3 lbs. Holding capacity: 7500 lbs

3-3/4

1 MIN

LOCK 7-19/32 8-11/16 MIN

3/8

Also available in stainless steel... CL-500-LPA-S (Clamp)

CL-500-PAA-S (Latch Plate)

MANUFACTURING CO. (Rev. 9/04)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

49TC

LATCH ACTION (4) HOLES 13/64 DIA. FOR #10 OR M5 SCREWS #8-32 THREAD (5/32 DIA U-BOLT) 13/16

3-13/32 2-29/32

2-1/8

3/4 1-3/8

7/16 1/4

7/8

9/16

1/2 1

1 MIN 7/16 ADJ

17/32

3/16

5/32 (2) HOLES 11/64 DIA FOR #8 OR M4 SCREWS

1-1/2 DRAWING MOVEMENT

CL-110-PA 2000 lbs

1000 lbs

500 lbs

Similar to the adjustable-U-bolt latch clamps on page 46, except with their pulling direction perpendicular to the base. Supplied with matching latch plate. Large, comfortable handle grip. Available in three sizes.

(4) HOLES 9/32 DIA FOR 1/4 OR M6 SCREWS 1/4-20 THREAD (1/4 DIA U-BOLT) 1-1/8

3-15/16 3-3/16

2-7/16

1 5/8 1-9/16

3/4 1-5/16 1-11/32 MIN

9/32

1 1-1/2

CL-110-PA Miniature latch clamp with high holding capacity. 1-1/2-inch

13/16

drawing movement. Threaded U bolt allows a 7/16-inch adjustment range. Shipping weight 0.3 lbs. Holding capacity: 500 lbs

9/32 (2) HOLES 7/32 DIA FOR #10 OR M5 SCREWS

11/16 ADJ 43/64

11/32 2-1/16 DRAWING MOVEMENT

CL-210-PA

CL-210-PA Medium-size latch clamp with 2-1/16-inch drawing movement. Threaded U bolt allows an 11/16-inch adjustment range. Shipping weight 0.6 lbs. Holding capacity: 1000 lbs

(4) HOLES 11/32 DIA FOR 5/16 OR M8 SCREWS 5/16-18 THREAD (5/16 DIA U-BOLT) 1-3/4

5-1/4 4-7/32

CL-310-PA Heavy-duty latch clamp. Well-suited for applications such as plastic molding. 2-1/2-inch drawing movement. Threaded U bolt allows an 1-1/8-inch adjustment range. Shipping weight 1.4 lbs. Holding capacity: 2000 lbs

11/16 2-1/16 1-7/16 1-1/16

Also available in stainless steel. . .

3-3/32

1-3/16

5/16

1-1/4 1-7/8

2-3/32 MIN

2-1/8 1-1/8 ADJ

1-3/16 13/64 (2) HOLES 11/32 DIA FOR 5/16 OR M8 SCREWS

1/2 2-1/2 DRAWING MOVEMENT

CL-110-PA-S 500 lbs

CL-210-PA-S 1000 lbs

CL-310-PA-S 2000 lbs

CL-310-PA

MANUFACTURING CO. 50TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 6/05)

LATCH ACTION PA P E R 250PA

PAS P E R 250PAS

1-1/2

(4) HOLES 13/64 DIA FOR #10 OR M5 SCREWS

1/2 19/64 DIA

3/4

1-15/16

1000 lbs

1-3/8

1-3/8 5/16-18 THREAD

3/4

1/2 1-1/4 MIN

1-1/2

4 DRAWING MOVEMENT 5/16 ADJUSTMENT 2-1/2

375 lbs

1-3/8 OPTIONAL 3/4 LATCH PLATE

Latch clamp with a versatile hook for grasping a rod or rim. Hook is threaded at one end to allow adjustment after mounting. Base pivots to allow horizontal or vertical latching. Choice of two sizes. Optional latch plate can be mounted as shown in the drawings, or reversed, for mounting flexibility.

2 1-1/8

7/16

(4) HOLES 13/32 DIA FOR 3/8 OR M10 SCREWS

2-3/8

31/64 DIA 3-3/8

Threaded hook allows a 5/16-inch adjustment range. Shipping weight 0.8 lbs. Order matching latch plate CL250-PA-L separately (CL-250-PA-S-L in stainless). Holding capacity: 375 lbs

2-3/8

CL-350-PA Large-capacity latch clamp with 6-1/8-inch drawing move-

1-1/8 7/16 2 2 MIN 6-1/8 DRAWING MOVEMENT 3/4 ADJUSTMENT 3-1/4

ment. Threaded hook allows a 3/4-inch adjustment range. Shipping weight 2.5 lbs. Order matching latch plate CL350-PA-L separately. Holding capacity: 1000 lbs

5/8 DIA

1-13/16 OPTIONAL LATCH PLATE

E ABL L I A AV L NOW MANUA ! H WIT Y LOCK ET SAF

manual safety lock. Push knob in to lock, pull knob out to unlock. Holding capacity: 375 lbs

1/8 5-1/2 7-1/2 MIN

CL-250-PA

CL-250-PA Medium-size latch clamp with a 4-inch drawing movement.

CL-257-PA Same as CL-250-PA except with a

5/8 DIA 11/32

3-3/8 1/2-13 THREAD

2-5/8

3/16

5/16 9-7/16 11-11/16 MIN

CL-350-PA Also available in stainless steel . . .

Extra hooks available . . .

CL-251-PA Narrow Base 375 lbs

CL-250-PA-S

CL-250-PA-HOOK CL-250-PA-S-HOOK CL-350-PA-HOOK

MANUFACTURING CO. (Rev. 7/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

51TC

LATCH ACTION PA P E R 150PA

PAS P E R 150PAS

1200 lbs

375 lbs

Latch clamp with fixed reach for installation where no length adjustment is required. An adjustable stop allows latching at different angles. Available in two sizes.

CL-150-PA Medium-size clamp with 4-inch drawing movement. Shipping weight 0.8 lbs. Holding capacity:

375 lbs

CL-170-PA

CL-150-PA

Larger clamp with 3-3/8-inch drawing movement. Shipping weight 1.2 lbs. Holding capacity:

1200 lbs

Also available in stainless steel...

CL-150-PA-S

CL-170-PA

MANUFACTURING CO. 52TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 8/97)

TOGGLE PLIERS

Sizes marked * are also available in stainless steel

Hand Held

200 lbs

350 lbs

700 lbs

pp. 54-56 Powerful forged steel toggle pliers. Available in five sizes. Larger sizes feature a quick-release lever for easy opening.

Permanently Attached p. 57 Handy weld-on/bolt-on clamp for holding down lids, covers etc. Clamping jaw opens a full 90째 for extra clearance. 800 lbs*

Bar Clamp p. 57 Multi-purpose bar clamp, with forged steel clamping jaw. Order with optional lower jaw, or attach bar by welding. 800 lbs

MANUFACTURING CO. (Rev. 7/02)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

53TC

TOGGLE PLIERS PL P E R 50PL

CL-50-PL-2 Hex-Head Spindle and Bottom Cushion

200 lbs CL-50-PL-3 Dual Hex-Head Spindle

CL-50-PL

Hex-Head Spindle Tiny-yet-powerful toggle pliers made of forged steel. 1-inch jaw width. Supplied with 1/4-20 vinyl-coated hex-head spindle CL-14208-SA. Optionally available as CL-50-PL-2 with a bottom-jaw cushion, or as CL-50-PL-3 with (2) vinyl-coated hexhead spindles, CL-14100-SA. Shipping weight 0.4 lbs. Holding capacity:

200 lbs

PL P E R 150PL

350 lbs

CL-150-PL Medium-size toggle pliers made of forged steel. 1-1/4-inch jaw width. Supplied with 5/16-18 hex-head spindle CL-516212-SA. Shipping weight 0.5 lbs. Holding capacity: 350 lbs

MANUFACTURING CO. 54TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 2/98)

TOGGLE PLIERS PL P E R 254PL

700 lbs

CL-254-PL Swivel-Foot Spindle Heavy-duty toggle pliers made of forged steel. 1-3/4 inch jaw width. Two-way quick-release lever for easy opening. Supplied with 3/8-16 swivel-foot spindle CL-38314-SF. Optionally available as CL-250-PL with hex-head spindle CL-38314-SA, as CL254-PL-2 with (2) hex-head spindles CL-38314-SA, or as CL252-PL with flat-cushion spindle CL-38314-FC. Shipping weight 1.3 lbs. Holding capacity: 700 Lbs

CL-250-PL

CL-252-PL

CL-254-PL-2

Hex-Head Spindle

Flat Cushion Spindle

Dual Hex-Head Spindle

MANUFACTURING CO. (Rev. 2/98)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

55TC

TOGGLE PLIERS PL P E R 454PL

CL-450-PL Hex-Head Spindle

700 lbs CL-452-PL Flat-Cushion Spindle

CL-454-PL Swivel-Foot and Hex-Head Spindles Wide-jaw heavy-duty toggle pliers made of forged steel. 3-inch jaw width. Two-way quick-release lever for easy opening. Supplied with 3/8-16 swivel-foot spindle CL-38314-SF and hex-head spindle CL-38314-SA. Optionally available as CL-450-PL with single hexhead spindle CL-38314-SA, or as CL-452-PL with a single flat-cushion spindle CL-38314-FC. Shipping weight 1.4 lbs. Holding capacity: 700 lbs

PL P E R 550PL

700 lbs

CL-550-PL Extra-wide-jaw heavy-duty toggle pliers made of forged steel. 4-1/4-inch jaw width. Two-way quick-release lever for easy opening. Supplied with (2) 3/8-16 hex-head spindles CL-38314SA. Shipping weight 1.6 lbs. Holding capacity: 700 lbs

MANUFACTURING CO. 56TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 2/98)

TOGGLE PLIERS PLS P E R 325PLS

800 lbs Stainless Steel

CL-325-PL-S Handy weld-on/bolt-on stainless steel clamp for holding down lids, covers, etc. Clamping jaw opens a full 90째 for extra clearance, while handle moves 50째. Supplied with 1/2-13 stainless hex-head spindle CL-12234-SA-S. Shipping weight 1.0 lbs. Holding capacity:

800 lbs

PL P E R 345PL

PLA P E R 345PLA

800 lbs

CL-345-PL Multi-purpose bar clamp with forged steel clamping jaw. Order with optional lower jaw CL-345-PLA, or attach bar by welding. Jaw opens 84째 while handle moves 60째. Supplied with 3/8-16 swivel-foot spindle CL-38314-SF. Shipping weight 2.7 lbs. Holding capacity: 800 lbs

Optional lower jaw . . .

CL-345-PLA

MANUFACTURING CO. (Rev. 2/98)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

57TC

AIR-POWERED CLAMPS

FILTER/REGULATOR/LUBRICATOR - CLR-100-FRL 4-WAY AIR VALVE CL-14-PCAV

SHOP AIR SUPPLY

(2) SILENCERS CL-14-PCEM CHECK VALVE - CLR-224-ACV

Toggle Hold-Down Clamps

100 lbs

200 lbs

500 lbs

1000 lbs

5000 lbs

pp. 59-63 Similar to a vertical-handle hold-down clamp, except linkage is operated by a double-acting air cylinder instead of by hand. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails.

Toggle Push Clamps

100 lbs

p. 64-65 Similar to a manual plunger clamp, except linkage is operated by a doubleacting air cylinder instead of by hand. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails.

850 lbs

Swing Clamps

14 lbs

25 lbs

66 lbs

100 lbs

165 lbs

277 lbs

(See SWIFTSURE Catalog) Hold-down clamp with a clamping arm that rotates 90째 for clear loading. Sturdy helical-cam mechanism first rotates arm, then clamps down. Double acting. (Not shown in this catalog section . . . see SWIFTSURE catalog to order.)

Air Accessories

Clamping Valves

Check Valves

Exhaust Mufflers

Air Fittings

Seal Replacement Kits

p. 67 Complete selection of accessories including clamping valves, check valves, exhaust mufflers, air fittings, and seal replacement kits.

MANUFACTURING CO. 58TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/03)

AIR-POWERED CLAMPS AIR SUPPLY FROM ABOVE

PTC P E R 400PTC

AIR SUPPLY FROM BELOW

100 lbs

Also available with position sensing:

CL-400-PTC Super-compact hold-down clamp for applications where space is at a premium. Open arm allows spindle adjustment. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. Arm opens 100째. 3/4"-bore double-acting air cylinder with #10-32 ports (see page 67 to order fittings). Supplied with #10-32 flat-cushion spindle CL-316112-FC and (2) CL-3166-TW flanged washers. 100-psi maximum input air pressure. Shipping weight 0.8 lbs. An optional bracket for side mounting is also available (CL-400-PCBR). Holding capacity: Clamping force at 100 psi, at center of arm:

Please contact factory for more information.

100 lbs 100 lbs (4) HOLES 11/64 DIA FOR #8 OR M4 SCREWS 7/32

15/16

11/16

3/16

(2) #10-32 PORTS

5/8

3/8

5/16 5/8

(4) HOLES 11/64 DIA FOR #8 OR M4 SCREWS 5/8 3/32

29/32

15/16 1-7/8

23/32

#10-32 FLAT CUSHION SPINDLE

7/8 2-11/32 3 4-1/4

7/8

1-11/16 1-29/32

OPTIONAL MOUNTING BRACKET CL-400-PCBR (ORDER SEPARATELY)

MANUFACTURING CO. (Rev. 6/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

59TC

AIR-POWERED CLAMPS PTC P E R 500PTC

200 lbs

Also available with position sensing:

Please contact factory for more information.

CL-500-PTC Small-yet-powerful hold-down clamp with a long open arm. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. Arm opens 100째. 1-1/4"-bore double-acting air cylinder with 1/8NPT ports. Accepts any 1/4-20 short spindle and (2) CL-148-TW flanged washers ... see pages 68-70 to order. 100psi maximum input air pressure. Shipping weight 2.5 lbs. Holding capacity: 200 lbs Clamping force at 100 psi, at center of arm: 200 lbs

(4) HOLES 13/64 DIA FOR #10 OR M5 SCREWS 1/8

2-1/16 1/4

9/16

1-5/16 DIA

1-1/16 1/8 1/4

1/2

1/8 NPT PORTS

1-3/4 DIA 3/8

2-15/32 1-7/32 1-1/2

1-1/32 13/16 2-5/16

3 3-1/2 9

2-1/4 2-3/4

MANUFACTURING CO. 60TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 6/05)

AIR-POWERED CLAMPS PTC P E R 1000PTC

Open Arm

Solid Arm

Also available with position sensing:

500 lbs

CL-1000-PTC CL-1001-PTC

Open Arm

Please contact factory for more information.

Solid Arm Popular medium-size hold-down clamp available with a solid arm, or an open arm for spindle adjustment. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. Arm opens 92째. 1-1/4"-bore double-acting air cylinder with 1/8-NPT ports. Accepts any 5/16-18 short spindle and (2) CL-51610-TW flanged washers . . . see pages 68-70 to order. Solid-arm version accepts a CL-518000-BR bolt retainer. 100-psi maximum input air pressure. Shipping weight 3.0 lbs. Holding capacity: Clamping force at 100 psi, at center of arm:

3-3/8 9/32

500 lbs 390 lbs (4) HOLES 9/32 DIA FOR 1/4 OR M6 SCREWS 1/8

3/4 1-5/16 DIA

1-1/4 1/8

IBP 7/16

3/4

1/8 NPT PORTS 1-3/4 DIA 3-1/16

5/8 2-1/16 1-3/8

1-3/16

IBP 1-5/32 3-19/32

3-5/8 3-1/8

IBP

2-1/4 2-25/32

10-1/4

MANUFACTURING CO. (Rev. 7/03)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

61TC

AIR-POWERED CLAMPS PTC P E R 2000PTC

Open Arm

Solid Arm Also available with position sensing:

1000 lbs Please contact factory for more information.

CL-2000-PTC CL-2001-PTC

Open Arm

Solid Arm Extra-large hold-down clamp available with a solid arm, or an open arm for spindle adjustment. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. Arm opens 83째. 1-3/4"bore double-acting air cylinder with 1/4-NPT ports. Accepts any 1/2-13 spindle and (2) CL-1213-TW flanged washers . . . see pages 68-70 to order. Solid-arm version accepts a CL-113000-BR bolt retainer. 100 psi maximum input air pressure. Shipping weight 6.0 lbs. Holding capacity: 1000 lbs Clamping force at 100 psi, at center of arm 680 lbs 4-15/32 1-13/32

3/16

17/32 1-25/32

1-27/32 DIA 3/16 7/16

1-1/4

1/4 NPT PORTS (4) HOLES 11/32 DIA FOR 5/16 OR M8 SCREWS

2-1/2 DIA

7/8 4-3/16 2-5/8 2-21/32

2-3/16

1-11/16 3 4-13/32

3-1/8 3-5/8

14-15/32

MANUFACTURING CO. 62TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 6/05)

AIR-POWERED CLAMPS PTC P E R 3000PTC

5000 lbs

CL-3000-PTC

Heavy-duty hold-down clamp with a solid forged steel clamping arm. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. Arm opens 83째. 2-1/2"-bore double-acting air cylinder with 1/4-NPT ports. 150-psi maximum input air pressure. Shipping weight 15.0 lbs. Holding capacity: 5000 lbs Clamping force at 100 psi, at center of arm: 1600 lbs

MANUFACTURING CO. (Rev. 7/03)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

63TC

AIR-POWERED CLAMPS PPC P E R AIR SUPPLY FROM ABOVE

600PPC

AIR SUPPLY FROM BELOW

100 lbs

Also available with position sensing:

CL-600-PPC Super-compact plunger clamp. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. 7/16" plunger travel. 3/4"-bore double-acting air cylinder with #10-32 ports (see page 67 to order fittings). Supplied with #8-32 nylon hex-head spindle CL-832203-SA. 100-psi maximum input air pressure. Shipping weight 0.8 lbs. An optional bracket for side mounting is also available (CL-400-PCBR). Holding capacity: Clamping force at 100 psi:

Please contact factory for more information.

100 lbs 100 lbs

1/4 DIA

(3) HOLES 11/64 DIA FOR #8 OR M4 SCREWS

1-1/4 3/8

29/32

1-5/16 5/8

15/16 15/32

8-32 THREAD 1/2 DEEP 7/16 DIA

5/16

5/8 #10-32 PORTS 7/16 TRAVEL

5/16

1-29/32 15/16

23/32 1/2 1-1/4 (3) HOLES 11/64 DIA FOR #8 OR M4 SCREWS OPTIONAL MOUNTING BRACKET CL-400-PCBR (ORDER SEPARATELY)

1-7/32 2-23/32 3-3/8 4-15/16

1-29/32

1-11/16

MANUFACTURING CO. 64TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 6/05)

AIR-POWERED CLAMPS PPC P E R 1500PPC

850 lbs

Also available with position sensing:

CL-1500-PPC Larger-size plunger clamp. Toggle linkage provides high holding capacity and insures positive mechanical locking even if air pressure fails. 1" plunger travel. 1-1/4"-bore double-acting air cylinder with 1/8-NPT ports. Accepts any 3/8-16 spindle . . . see pages 68-70 to order. 100-psi maximum input air pressure. Shipping weight 3.2 lbs. Holding capacity: 850 lbs Clamping force at 100 psi: 430 lbs

(4) HOLES 11/32 DIA FOR 5/16 OR M8 SCREWS 1/8

3 5/8 DIA

Please contact factory for more information.

1-5/16 29/32 DIA

1-5/16 DIA

1-5/8 IBP 5/16

1/8 NPT PORTS 1-5/8 1-3/4 DIA

3/8-16 THREAD 1-1/8 DEEP

1 TRAVEL

3-3/32 2-3/16 1-3/8

1-3/8 IBP 2-1/2 3

5-1/16 5-3/8 11-9/16

IBP

2-5/8 3-1/8

MANUFACTURING CO. (Rev. 7/03)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

65TC

New Items Book Maximizes Options TINY VISE

™

V-Jaw Edge Clamps Custom Blank Tooling Blocks Leveling Feet Key Inserts

Long-Arm Hook Clamps

Threaded Detent Pins

Short Spring Plungers with Extended Travel Chuck Jaws Latch Action and Metric Toggle Clamps

Carr Lane’s New Items Book is available in print or at www.carrlane.com. We would like all customers and prospects to know about these important new items. Please help us spread the word! MANUFACTURING CO. 4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

AIR-POWERED CLAMPS CLAMPING VALVES*

CHECK VALVES*

CLR-224-ACV Allows air to flow in one direction only. 1/4-NPT male x 2.

3/4

(2) MOUNTING HOLES FOR 1/4-20 OR M6 SCREWS

3/8

EXHAUST MUFFLERS*

1-3/16

1-7/8

4-1/4

3-1/8

CL-14-PCAV Versatile two-position, four-way valve for simple and convenient clamp control. Five 1/4-NPT ports. 150 psi maximum pressure.

CL-14-PCEM Durable, compact, sinteredbronze exhaust muffler. 1/4-NPT male.

AIR FITTINGS* Quick-Disconnect Coupler

Adapter

Hex Nipple

Coupling

Tubing Connector

CL-10-PCCP #10-32 female x 2 CL-14-PCCP 1/4-NPT female x 2

CL-1810-PCTC 1/8-OD tube x #10-32 male CL-14-PCTC 1/4-OD tube x 1/4-NPT male (Includes compression sleeve and nut)

Tee

Branch Tee

Cross

CL-10-PCTE #10-32 female x 3 CL-14-PCTE 1/4-NPT female x 3

CL-10-PCBT #10-32 female x 2, #10-32 male

CL-14-PCCR 1/4-NPT female x 4

CL-10-PCHN #10-32 male x 2 CL-14-PCQD CL-14-PCHN Both halves, 1/4-NPT female CL-1014-PCA 1/4-NPT male x 2 CL-14-PCQDS #10-32 female x 1/4-NPT male CL-38-PCHN Female socket, 1/4-NPT female CL-1418-PCA 3/8-NPT male x 2 CL-14-PCQDP 1/4-NPT female x 1/8-NPT male CL-3814-PCHN Male plug, 1/4-NPT female CL-3814-PCA (Industrial Interchange) 3/8-NPT female x 1/4-NPT male 3/8-NPT male x 1/4-NPT male

Street Elbow

Banjo Elbow

CL-10-PCBE CL-14-PCSE 1/4-NPT female x 1/4-NPT male #10-32 female x #10-32 male

* Do not use in high-pressure hydraulic lines.

MANUFACTURING CO. (Rev. 8/97)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

67TC

TOGGLE CLAMP ACCESSORIES

HEX-HEAD SPINDLES (STANDARD ADJUSTABLE)

ALSO W O N ABLE AVAIL TRIC! IN ME

NYLON (USA) CL-832203-SA

#8-32

7/8

NYLON (METRIC) 1/4

1/8

C 5/16

D 1/8

CLM-416-SA

STEEL (USA) A #10-32

PART NO. CL-316112-SA CL-14112-SA CL-14200-SA CL-516212-SA CL-38314-SA CL-12314-SA CL-58438-SA

1/4-20 5/16-18 3/8-16 1/2-13 5/8-11

B 1-3/8 1-11/16 2-3/16 2-11/16 3-1/4 3-5/16 4-3/8

Simple spindle design provides maximum clamping force. Fully threaded for maximum adjustment range. Assembly includes two jam nuts. C HEX. A THREAD

D B

IBP

#8-32 1/4-20

1-3/16 1 1-1/2

PART NO. CLM-530-SA CLM-640-SA CLM-650-SA CLM-850-SA CLM-865-SA CLM-1070-SA CLM-1275-SA CLM-16100-SA

7/16 3/16 1/2 9/16 3/4 15/16

3/16 1/4 5/16 3/8

1/4

7mm .12

A M5

B 1.32 1.75 M6 2.15 M8 2.19 2.78 M10 3.03 M12 3.27 M16 4.33

C D 8mm .14 10mm .18 13mm .22 17mm .28 19mm .31 24mm .39

1/8

STAINLESS STEEL (METRIC)

7/16 3/16

CLM-416-SA-S CLM-425-SA-S CLM-530-SA-S CLM-640-SA-S CLM-650-SA-S CLM-850-SA-S CLM-865-SA-S CLM-1070-SA-S

STAINLESS STEEL (USA) CL-83234-SA-S 7/8 #8-32 1/4 1/8 CL-832203-SA-S 1-1/8 CL-316100-SA-S #10-32 1-1/8 5/16 1/8 1/4-20 1-11/16 7/16 3/16 CL-14112-SA-S CL-516212-SA-S 5/16-18 2-11/16 1/2 3/16 3/8-16 3-1/4 9/16 1/4 CL-38314-SA-S 1/2-13 2-13/16 3/4 5/16 CL-12234-SA-S

.75 7mm .12 1.10 M5 1.32 8mm .14 M6 1.75 10mm .18 2.15 M8 2.19 13mm .22 2.78 M10 3.03 17mm .28 M4

FLAT-CUSHION SPINDLES Standard spindle supplied with many clamps. Molded neoprene tip provides scratch-free clamping with medium force. Assembly includes two jam nuts. D DIA A THREAD IBP C DIA

E B

.75

STEEL (METRIC)

VINYL-DIPPED STEEL (USA) CL-832208-FC CL-14100-SA CL-14208-SA

STEEL PART NO. CL-316112-FC CL-14112-FC CL-14200-FC CL-518208-FC CL-516212-FC CL-38314-FC

B A #10-32 1-3/8 1-5/8 1/4-20 2-1/8 5/16-18 2-1/4 3 3/8-16 3-1/2

C DIA 9/16

E D 7/16 7/16

5/8 13/32 5/8 3/4

1/2

3/4

13/16

5/8

7/8

CONE-CUSHION SPINDLES Excellent for clamping into drilled holes, slots, or corners. Molded neoprene tip provides scratch-free clamping with medium force. Assembly includes two jam nuts. A THREAD C DIA IBP 70˚

STEEL PART NO. CL-316112-CC CL-14112-CC CL-14200-CC CL-516212-CC CL-38314-CC

A #10-32 1/4-20 5/16-18 3/8-16

B 1-3/8 1-5/8 2-1/8 3 3-1/2

C DIA D 9/16 7/16 5/8 5/8 5/8 3/4 3/4 13/16 7/8

D B

MANUFACTURING CO. 68TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 7/05)

TOGGLE CLAMP ACCESSORIES

SPRING-LOADED SPINDLES Clamps with strong spring force to compensate for varying part thicknesses. Excellent for clamping castings that vary slightly in size. To install, weld bolt retainer to clamping arm. Assembly includes two jam nuts, a die spring, and a bolt retainer.

STEEL (USA) FORCE AT "E" (lbs) E MIN MAX F C 50 5/8 7/16 1-9/32 1-3/8 1/4 100 5/8 1/2 1-11/16 1-7/8 1/4 200 7/8 9/16 1-3/4 2-9/32 5/16 D

PART NO. A B CL-14200-SL 1/4-20 2-1/4 CL-516212-SL 5/16-18 2-3/4 CL-38314-SL 3/8-16 3-1/2

SWIVEL-FOOT SPINDLES Swivel foot provides full contact on uneven or sloped surfaces. Assembly includes two jam nuts.

STEEL (USA)

PART NO. A B CL-14112-SF 1-3/4 1/4-20 CL-14200-SF 2-1/4 CL-516212-SF 5/16-18 2-3/4 CL-38314-SF 3/8-16 3-1/2

SSC

C DIA

1/2

3/8

9/16 5/8

7/16 1/2

SWIVEL SCREW CLAMPS STEEL (USA) Screw clamp with patented removable, interchangeable swivel foot, available in many sizes and varieties. See pages 68-69 of the tooling-component section for additional lengths and foot options, and also metric sizes. Order two jam nuts separately.

PART NO. CL-23-SSC CL-27-SSC CL-43-SSC CL-44-SSC CL-46-SSC

JAM NUT PART NO. (2 REQD) CL-4-JN CL-5-JN CL-6-JN CL-8-JN CL-10-JN

A 1/4-20 5/16-18 3/8-16 1/2-13 5/8-11

B 1-19/32 2-3/32 3-1/8 4-1/16 5-3/64

D C DIA 23/64 3/8 27/64 1/2 1/2 9/16 17/32 3/4 21/32 15/16

E 1/8 5/32 3/16 3/16 7/32

STEEL WITH DELRIN® FOOT (USA) PART NO. CL-23-SSCN CL-27-SSCN CL-43-SSCN CL-44-SSCN CL-46-SSCN

IBP

A (THD.)

20˚ SWIVEL

C B

D C DIA 23/64 3/8 27/64 1/2 1/2 9/16 17/32 3/4 21/32 15/16

E 1/8 5/32 3/16 3/16 7/32

STAINLESS STEEL (USA)

IBP

JAM NUT PART NO. A B (2 REQD) 1/4-20 1-19/32 CL-4-JN 5/16-18 2-3/32 CL-5-JN 3/8-16 3-1/8 CL-6-JN 1/2-13 4-1/16 CL-8-JN 5/8-11 5-3/64 CL-10-JN

PART NO. CL-23-SSC-S CL-27-SSC-S CL-43-SSC-S

JAM NUT PART NO. D DIA A B (2 REQD) E C CL-4-JN-S 1/4-20 1-19/32 23/64 3/8 1/8 CL-5-JN-S 5/16-18 2-3/32 27/64 1/2 5/32 CL-6-JN-S 3/8-16 3-1/8 1/2 9/16 3/16

MANUFACTURING CO. (Rev. 8/05)

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

69TC

TOGGLE CLAMP ACCESSORIES

FLANGED WASHERS STEEL

Two flanged washers required per clamp

For open-arm clamps. Use two flanged washers to mount spindle, one above the arm and one below.

C B PART NO. DIA A 7/16 CL-832-TW 15/32 #8-32 or M4 1/2 CL-3166-TW 9/16 #10-32 or M5 9/16 CL-147-TW 5/8 1/4-20 or M6 19/32 11/16 CL-148-TW 3/4 CL-51610-TW 5/16-18 or M8 7/8 CL-3811-TW 3/8-16 or M10 15/16 1 CL-1213-TW 1/2-13 or M12 1-5/32 1-1/4 CL-5811-TW 5/8-11or M16 1-3/8 1-15/32

STAINLESS STEEL

A DIA BOLT

PART NO. CL-832-TW-S CL-3166-TW-S CL-147-TW-S CL-148-TW-S CL-51610-TW-S CL-3811-TW-S

IBP IBP B

C DIA

BR & S

A #8-32 or M4 #10-32 or M5

B 7/16 1/2 9/16 19/32 3/4 15/16

1/4-20 or M6 5/16-18 or M8 3/8-16 or M10

C DIA 15/32 9/16 5/8 11/16 7/8 1

BOLT RETAINERS BR (FOR HTC & VTC CLAMPS) IBP E

PART NO. CL-142000-BR CL-518000-BR CL-316000-BR CL-113000-BR CL-511000-BR

A DIA D IBP C

BR For VTC clamps

S For TC clamps

For solid-arm clamps. Weld on bolt retainer at desired arm length and spindle angle.

A DIA 9/32 21/64 17/32 9/16 11/16

B 1-1/4 1-1/4 1-1/2 1-5/8 1-7/8

D C 1/2 3/16 5/8 1/4 3/4 5/16 7/8 3/8 1-1/4 3/8

E 3/32 3/32 1/8 1/8 1/8

S (FOR TC CLAMPS)

IBP

PCBR

SPINDLE SIZE 1/4-20 or M6 5/16-18 or M8 3/8-16 or M10 1/2-13 or M12 5/8-11 or M16

A DIA DRILL

PART NO. CL-1458-S CL-51658-S CL-3878-S

SPINDLE SIZE 1/4-20 or M6 5/16-18 or M8 3/8-16 or M10

A B DIA DIA .257 5/8 .316 5/8 .397 3/4

C 5/8 5/8 7/8

MOUNTING BRACKETS (4) HOLES 11/64 DIA FOR #8 OR M4 SCREWS 5/8 5/16

5/8

IBP 15/16

5/16

15/32

Handy bracket for side-mounting small clamps. One reversible bracket fits several clamps.

Push/Pull

Downholding

IBP

PART NO. 1/2

CL-400-PCBR

FITS DOWNHOLDING CLAMPS CL-150-VTC CL-400-PTC

FITS PUSH CLAMPS CL-50-SPC CL-600-PPC

(3) HOLES 11/64 DIA FOR #8 OR M4 SCREWS

MANUFACTURING CO. 70TC

4200 Carr Lane Ct., P.O. Box 191970 St. Louis, Missouri 63119-7970 USA Phone: 314-647-6200, FAX: 314-647-5736 Web Site: www.carrlane.com

(Rev. 8/05)