Product Catalogue
Titus Tekform
Technical Catalogue
Product
Catalogue
3rd Edition Titus Tekform
www.titustekform.com.au
Titus Tekform Technical Catalogue 2023
0.3
Important
Information
Technical information
While every effort has been made in the
production of this catalogue to ensure the
accuracy of information, our products are
continually being revised and users should
confirm the up to date specification before
ordering. Due to constant improvement of
products presented in the catalogue, we can
make changes at any time and without notice.
Responsibility
It is the responsibility of the user to ensure
the fitness of hardware for the intended
purpose. We recommend assessment by
appropriate testing in the application and by
technical enquiry to our representatives.
Intellectual property
Titus Group owns the intellectual property
rights in its products worldwide whether
as trademarks, patents, intellectual copyright,
designs, illustrations, drawings and the
‘know-how’ contained in their design and
production. Titus Group respects the
equivalent rights in competitors and all
other relevant product design rights. To our
knowledge our products do not infringe any
intellectual property rights of competitors or
other parties. Titus Group takes infringements
of its rights seriously and will rigorously defend
these rights to the full extent of the law.
*Non-preferred articles
All Item numbers in the catalogue marked
with * are for non-preferred items available on
extended delivery times.
Trademarks
Titus and Titusonic are registered trademarks
of Titus International Ltd. Lama is a
registered trademark of Titus d.o.o. Dekani,
WoodWelding is a registered trademark of
WW SA.
Contents
Drawers & Runners
1
- Product Guide
- Tekform Slimline Double Wall Drawer
- Tekform Double Wall Drawer
- Tekform Single Wall Drawer
- Drawer Runners
- BOM Codes
1.2
1.4
1.52
1.89
1.102
1.106
Hinges & Dampers
2
- TeraBlack Product Range
- Titus T-type Concealed Hinge
- Titus S-type Concealed Hinge
- Titus B-type Concealed Hinge
- General Hinges
- Hinge Accessories
- Titus Soft Close Damping Systems
2.2
2.36
2.82
2.98
2.100
2.102
2.107
Furniture Fittings
3
- Product Guide
- Overhead Solutions
- Titus Connectors
- Adjustable Cabinet Legs
- Furniture Legs
- Fastmount Concealed Panel Mounting
3.2
3.4
3.11
3.51
3.55
3.58
Fasteners
4
- Product Guide
- Screws
- Brad Nails
- Staples
- Accessories
4.2
4.4
4.13
4.15
4.16
General Hardware
5
- Product Guide
- Cabinet Hardware
- Furniture Locks
- General Hardware & Tools
- Safety Materials
5.2
5.4
5.22
5.26
5.35
Edgebanding
6
- Product Guide
- OptiBoard Edgeband
- ABS Edgeband
- PVC Edgeband
- Melamine Edgeband
6.2
6.3
6.6
6.8
6.9
Abrasives & Adhesives
7
- Product Guide
- Abrasives
- Adhesives
7.2
7.4
7.8
Cabinet Handles
8
- Product Guide
- Bow Handles
- Profile Handles
- Provincial Handles
- Recessed Handles
- Square Handles
- Stainless Steel Handles
- Knobs
8.2
8.4
8.13
8.21
8.24
8.25
8.43
8.45
Innerware & Wardrobe
9
- Product Guide
- Kitchen Innerware
- Laundry Innerware
- Wardrobe Hanging Rail
- Sliding & Folding Door Systems
- Drawer Inserts
- Waste Bins
9.2
9.4
9.20
9.23
9.24
9.33
9.42
LED Lighting
10
- Product Guide
- Information
- LED Strip Lights
- LED Profiles
- LED Downlights
- Sensors & Accessories
- Wireless & Connectivity
10.2
10.4
10.18
10.26
10.34
10.36
10.54
Sinkware & Appliances
11
- Product Guide
- Sinkware
- Tapware
- Kitchen Appliances
- Laundry Appliances
- Ducting
11.2
11.4
11.23
11.28
11.57
11.59
Doors, Panels & Surfaces
12
- Product Guide
- Stefano Orlati Opti Board
- Stefano Orlati Solid Surfaces
- Duraform Vinyl Wrapped Doors
- Alifrost Aluminium Doors
- Belle Roller Doors
12.2
12.3
12.10
12.13
12.23
12.30
0.6
Titus Tekform
Part of the Titus Group
Leading innovation
Titus innovations include pioneering
the Quickfit Toolless Dowel Insertion
technology and the innovative Hi-Lo
screws and Titus proprietary dampers.
65+ years of experience
The Titus Group has been involved
in the development and manufacture
of furniture fittings and precision
component solutions since 1953.
Global player
Worldwide engineering,
manufacturing and distribution
capabilities combined with local
service and product expertise.
0.7
Titus Tekform
Part of the Titus Group
Totally integrated
engineering
· Consistent and repeatable
product quality
· In-house manufacturing for
continuous improvement
· Unique product advantages
Fit for purpose innovations
· New and advanced features to
improve value for money and lower
‘total install cost’
· CAF - Consumer Assembly
Friendliness for faster assembly and
increased customer satisfaction
Titus Tekform Pty. Ltd. is a proud member of the Titus
Group of companies that sources, manufactures and
markets innovative small component solutions to
improve your competitiveness.
Product Design
Manufacturing Technologies
Manufacturing Operations
Quality and reliability
· Integrated quality system for
management of design,
manufacturing and service activities
in compliance with ISO 9001
· European quality certifications
including CATAS, FIRA and more
Precision Components
of consistent quality
0.8
Titus Tekform
Information
Business Philosophies & Principles
Our Vision To be the supplier of choice to the
Australasian kitchen manufacturing,
cabinet making and shop-fitting
industries.
We aim to gain total knowledge of our
customers and their markets to ensure
we meet our customer’s expectations
with global consistency.
Titus Technologies
Proven Quality and
Reliability
The Titus Group designs and
engineers leading techonologies for
tooling, assembly and high volume
manufacturing.
Titus Technologies are utilised by
some of the most trusted brands in the
automotive, white goods, OEM and
medical industries.
Our Mission To provide customers with solutions that
improve their competitiveness, through
innovative product features, faster
assembly times and better value for
money.
We invest in the abilities of individuals at
every level to continuously enhance input
efficiency and sustainability.
Our Service Guarantee We offer fit-for-purpose solutions to
improve your experience, from design to
build to application.
Our helpful and knowledgeable staff will
give you industry-leading expertise and
service in all your kitchen, bathroom,
wardrobe, shop-fitting, cabinet-making or
commercial hardware needs.
Our customer promise is innovation,
technical expertise and reliability as we
endeavour to exceed our customer
expectations by providing quality
products at a competitive price.
En
C
gagement
ustomer
Resou
cr
e
Al ol c
at oi n
and
Prod
u
ct
Product
Realisation
M
easurement
an
d
Ana
yl s si
mI
p or
vem
e
nt
0.9
Our Brands
Our carefully selected product range
includes superior Titus hinges, dampers
and furniture fittings; the extensive
Tekform Double Wall and Single Wall
drawer family; Stefano Orlati lighting,
handles and decorative surfaces; as well
as a comprehensive array of innerware,
sinks, taps, appliances, adhesives,
abrasives, fasteners, and edgebanding.
Engineered fittings and
precision components
Functional fittings and
cabinetry solutions
Decorative hardware,
surfaces and LED lighting
0.1
Download supporting documentation from the Titus Tekform website titustekform.com.au 0.2
Drawers
Tekform Slimline Drawer
& Runners
1.2
Tekform Slimline Drawer
Product Guide
Page
1.16
1.18
1.24
1.26
1.32
1.20
1.22
1.30
1.12
1.14
1.28
Tekform Slimline Drawer
Tekform Slimline Touch Opening Drawer SDWD-T 70
Tekform Slimline Drawer SDW70
Tekform Slimline Drawer SDWD-G 70 with Glass
Tekform Slimline Touch Opening Drawer SDWD-T 100
Tekform Slimline Drawer SDW100
Tekform Slimline Touch Opening Drawer SDWD-T 145
Tekform Slimline Drawer SDW145
Tekform Slimline Drawer SDWD-G 145 with Glass
Tekform Slimline Touch Opening Drawer SDWD-T 182
Tekform Slimline Drawer SDW182
Tekform Slimline Drawer SDWD-G 182 with Glass
SDWD-T Push Open 1.46
Mechanism for Slimline
Drawers
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.3
136
1.40
1.42
1.44
1.38
1.34
Inner Slimline Drawer Fronts
Inner Drawer Front for
Tekform Slimline Drawer
DW70
Inner Drawer Front for
Tekform Slimline Drawer
DW70 with Glass
Inner Drawer Front for
Tekform Slimline Drawer
DW145 with Bar
Inner Drawer Front for
Tekform Slimline Drawer
DW145 with Glass
Inner Drawer Front for
Tekform Slimline Drawer
DW182 with Bar
Inner Drawer Front for
Tekform Slimline Drawer
DW182 with Glass
1.4
Tekform Slimline
Drawer
‘EasyFix’ front
panel connector
· Hand insertion
· Quarter turn lock
· Repeatable assembly and
disassembly possible
Narrow sides
· Sleek look with 14mm thickness
· Efficient utilisation of drawer space
Flexibility of runner system
· Same drilling specification as
Tekform Double Wall Drawer
· Same machinery settings as
Tekform Double Wall Drawer
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.5
Tekform Slimline Drawer
Tekform Slimline
Drawer
Expanded tolerances
· Precise drawer alignment
· Smooth and silent operation
· Improved drawer stability
in open position
· +/- 1mm tolerance on
bottom panel width size
Integrated Titus damper
· Life-long consistent soft closing
performance at various closing
speeds
· ‘ConfidentClose’ - fast closing,
late start deceleration action,
quiet landing
· Low pull-out force
Tekform Slimline Drawer
Quality certified
· By European specialised
institutions
1.6
90º
min.
48
32
15.5
D
37
H
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
Tekform Slimline Drawer
Information
Technical Guide
How to choose the
appropriate drawer
dimension?
How to fix drawer
sides to the front
panel?
‘EasyFix’ front
connector
Screw-in front
connector
Select the drawer size based on available
cabinet space. Please refer to the below
chart with indicated minimum space
required in cabinet to assist in choosing
the appropriate drawer system.
· Hand insertion
· Quarter turn locking system
· Expandable plastic dowel
· Easy assembly and disassembly
of front panel
· Reliable connection
· Fixing with Ø3.5x15mm screw
(screws are not included)
Tekform Drawer nominal length (NL) in mm
NL 270 300 350 400 450 500 550
The Tekform Drawer is available with
‘EasyFix’ or screw-in front connectors. Front connector
Front connector
Tekform Drawer Tekform Drawer with Inner
Front
Min. height (H)
required
Cabinet
depth (D)
Min. height (H)
required
Cabinet
depth (D)
Tekform Slimline
Drawer SDW70 115mm NL+min 3mm 115mm NL+min 12mm
Tekform Slimline
Drawer SDW100 147mm NL+min 3mm NA NA
Tekform Slimline
Drawer SDW145 198mm NL+min 3mm 198mm NL+min 12mm
Tekform Slimline
Drawer SDW182 230mm NL+min 3mm 230mm NL+min 12mm
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.7
Tekform Slimline Drawer
A
Bottom panel
B
Back panel
ICW
ECW
ICW - 75 +/-0.5
L
A
70
ICW - 87 +/-0.5
3
4
2
5
1
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
H
Tekform Drawer nominal length (NL) in mm
NL 270 300 350 400 450 500 550
Bottom panel and
back panel cutting
dimensions
Dimensions of bottom and back
panel depend on:
· Cabinet width
· Nominal drawer length
· Drawer height
Cabinet width
H back panel
SDW70 68
SDW100 100
SDW145 151
SDW182 183
Back panel cutting
dimensions
Back panel height depends on the
selected drawer height.
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Bottom panel cutting
dimensions
NL 270 300 350 400 450 500 550
L 260 290 340 390 440 490 540
NL= Tekform Drawer nominal length (in mm)
1.8
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
192
192
192
192
224
192
224
40kg
Tekform Slimline Drawer
Information
Technical Guide
Expanded tolerances Tekform drawers provide expanded
tolerances in cabinet construction and
assure:
· Precise drawer alignment
· Smooth and silent operation
· Improved drawer stability in open
position
· The Tekform Drawer provides tolerance
of +/-1mm on bottom panel width size
How to choose the
appropriate drawer runner
fixing positions?
Drawer fixing positions depend on the
chosen drawer front type.
Tekform Slimline Drawer
with standard front
When a standard drawer front is applied,
use the third hole on the drawer runner
for fixing.
Tekform Slimline Drawer
with inner front
When an inner drawer front is applied,
use the second hole on the drawer runner
for fixing.
Load capacity Drawer load capacity is 40kg.
Front side
Front side
bottom panel width
tolerance +/- 1mm
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.9
Tekform Slimline Drawer
192
192
192
192
224
192
224
Side adjustment is done via
the adjustment screw on the drawer
side. Tighten the screw to adjust.
Height adjustment is done via the cam.
First, release the locking screw and
tighten it back after the front is adjusted.
Adjustments
+/- 1mm
+/- 2mm
Side adjusment
Height adjustment
Release
Adjust
Tighten
Adjustment needs to be done
on both sides of the drawer
1.10
Key Design Choices
'ConfidentClose' Fast closing
Late start of deceleration action
Quiet landing
CAF Consumer
Assembly Friendliness
‘EasyFix’ front panel connector with
expandable plastic dowel provides:
· Quick, tool-free insertion
· Quarter turn lock
· Repeatable assembly and
disassembly
90º
Front connector
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.11
Tekform Slimline Drawer
Damping action
Titus hydraulic damper
Even and smooth soft closing action.
· Soft and reliable closing
Designed and produced in-house.
· Reliable and consistent life-long
damping
· Smooth closing
· Dampers’ consistency over high volume
production runs assured
· 100% automated quality check
Flat damping curve shows the uniform action
produced during damper closing at a defined speed.
Damping
force
Stroke
1.12
with EasyFix
front connector
Item number for a set
White
400 655.8T61 > 150.00.K
450 655.8T62 > 150.00.K
500 655.8T63 > 150.00.K
550 655.8T64 > 150.00.K
ICW - 75 +/-0.5
L
A
68
ICW - 87 +/-0.5
B
Tekform Slimline
Drawer SDWD-T 70
Touch Opening SystemNominal length (mm)
A
Bottom panel
B
Back panel
ICW
ECW
ICW - 75 +/-0.5
L
A
68
ICW - 87 +/-0.5
B
Front
connector
Rear
connector
Drawer
side
Drawer
runner
Decorative
cover
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
One set consists of
SDWD-T Mechanism 2 pcs
Drawer sides 2 pcs
Drawer runners 2 pcs
^Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce
L=NL-10
For further explanation > see page 1.7
Screws not included. ^Front connectors determined by order code. Drawer Front Marking Jig for
Tekform Slimline SDW70
655.8016
SDWD-T Push Open
Mechanism
> see page 1.46
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.13
Tekform Slimline Drawer
192
192
192
192
224
192
224
192
192
192
192
224
192
224
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 115mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Installation dimensions
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9
A trial mounting is always recommended. For further information please contact Titus Tekform.
1.14
with EasyFix
front connector
Item number for a set
with Screw-in
front connector
Item number for a set
White
Anthracite grey
270 655.8T27 > 655.8E27 > 150.00 185.00
300* 655.8T30 > 655.8E30 > 150.00 185.00
350 655.8T35 > 655.8E35 > 150.00 185.00
400 655.8T40 > 655.8E40 > 150.00 185.00
450 655.8T45 > 655.8E45 > 150.00 185.00
500 655.8T50 > 655.8E50 > 150.00 185.00
550 655.8T55 > 655.8E55 > 150.00 185.00
ICW - 75 +/-0.5
L
A
68
ICW - 87 +/-0.5
B
Tekform Slimline
Drawer SDW70
Soft Close Drawer
Nominal length (mm)
A
Bottom panel
B
Back panel
ICW
ECW
ICW - 75 +/-0.5
L
A
68
ICW - 87 +/-0.5
B
Front
connector
Rear
connector
Drawer
side
Drawer
runner
Decorative
cover
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
One set consists of
Drawer sides 2 pcs
Drawer runners 2 pcs
^Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce L=NL-10
For further explanation > see page 1.7
Screws not included. ^Front connectors determined by order code. Drawer Front Marking Jig for
Tekform Slimline SDW70
655.8016
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.15
Tekform Slimline Drawer
192
192
192
192
224
192
224
192
192
192
192
224
192
224
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 115mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Installation dimensions
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9
A trial mounting is always recommended. For further information please contact Titus Tekform.
1.16
with EasyFix
front connector
Item number for a set
White
400 655.8U61 > 150.00.K
450 655.8U62 > 150.00.K
500 655.8U63 > 150.00.K
550 655.8U64 > 150.00.K
Tekform Slimline
Drawer SDWD-T 100
Touch Opening SystemNominal length (mm)
A
Bottom panel
B
Back panel
ICW
ECW
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
L=NL-10
For further explanation > see page 1.7
Screws not included. ^Front connectors determined by order code.
Front
connector
Rear
connector
Drawer
side
Drawer
runner
Decorative
cover
ICW - 87 +/-0.5
100
L
ICW - 75 +/-0.5
A
B ICW - 87 +/-0.5
100
L
ICW - 75 +/-0.5
A
B
Drawer Front Marking Jig for
Tekform Slimline SDW100
655.8017
One set consists of
SDWD-T Mechanism 2 pcs
Drawer sides 2 pcs
Drawer runners 2 pcs
^Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce
SDWD-T Push Open
Mechanism
> see page 1.46
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.17
Tekform Slimline Drawer
192
192
192
192
224
192
224
192
192
192
192
224
192
224
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 147mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Installation dimensions
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9
NL+3
37
min. 147
min.
48
32
32
ø8 +/-0.1x11
min.
33
min.
49
142
17
32
32
9
15.5
min.
48
32
32
min.
48
32
32
NL+3
37
min. 147
min.
48
32
32
ø8 +/-0.1x11
min.
33
min.
49
142
17
32
32
9
15.5
min.
48
32
32
min.
48
32
32
NL+3
37
min. 147
min.
48
32
32
ø8 +/-0.1x11
min.
33
min.
49
142
17
32
32
9
15.5
min.
48
32
32
min.
48
32
32
NL+3
37
min. 147
min.
48
32
32
ø8 +/-0.1x11
min.
33
min.
49
142
17
32
32
9
15.5
min.
48
32
32
min.
48
32
32
NL+3
37
min. 147
min.
48
32
32
ø8 +/-0.1x11
min.
33
min.
49
142
17
32
32
9
15.5
min.
48
32
32
min.
48
32
32
A trial mounting is always recommended. For further information please contact Titus Tekform.
1.18
with EasyFix
front connector
Item number for a set
with Screw-in
front connector
Item number for a set
White
Anthracite grey
270 655.8U27 > 655.8F27 > 150.00 185.00
300* 655.8U30 > 655.8F30 > 150.00 185.00
350 655.8U35 > 655.8F35 > 150.00 185.00
400 655.8U40 > 655.8F40 > 150.00 185.00
450 655.8U45 > 655.8F45 > 150.00 185.00
500 655.8U50 > 655.8F50 > 150.00 185.00
550 655.8U55 > 655.8F55 > 150.00 185.00
Tekform Slimline
Drawer SDW100
Soft Close Drawer
Nominal length (mm)
A
Bottom panel
B
Back panel
ICW
ECW
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
One set consists of
Drawer sides 2 pcs
Drawer runners 2 pcs
^Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce L=NL-10
For further explanation > see page 1.7
Screws not included. ^Front connectors determined by order code.
Front
connector
Rear
connector
Drawer
side
Drawer
runner
Decorative
cover
ICW - 87 +/-0.5
100
L
ICW - 75 +/-0.5
A
B ICW - 87 +/-0.5
100
L
ICW - 75 +/-0.5
A
B
Drawer Front Marking Jig for
Tekform Slimline SDW100
655.8017
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.19
Tekform Slimline Drawer
192
192
192
192
224
192
224
192
192
192
192
224
192
224
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 147mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Installation dimensions
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9
NL+3
37
min. 147
min.
48
32
32
ø8 +/-0.1x11
min.
33
min.
49
142
17
32
32
9
15.5
min.
48
32
32
min.
48
32
32
NL+3
37
min. 147
min.
48
32
32
ø8 +/-0.1x11
min.
33
min.
49
142
17
32
32
9
15.5
min.
48
32
32
min.
48
32
32
NL+3
37
min. 147
min.
48
32
32
ø8 +/-0.1x11
min.
33
min.
49
142
17
32
32
9
15.5
min.
48
32
32
min.
48
32
32
NL+3
37
min. 147
min.
48
32
32
ø8 +/-0.1x11
min.
33
min.
49
142
17
32
32
9
15.5
min.
48
32
32
min.
48
32
32
NL+3
37
min. 147
min.
48
32
32
ø8 +/-0.1x11
min.
33
min.
49
142
17
32
32
9
15.5
min.
48
32
32
min.
48
32
32
A trial mounting is always recommended. For further information please contact Titus Tekform.
1.20
with EasyFix
front connector
Item number for a set
White
400 655.8V61 > 150.00.K
450 655.8V62 > 150.00.K
500 655.8V63 > 150.00.K
550 655.8V64 > 150.00.K
Tekform Slimline
Drawer SDWD-T 145
Touch Opening SystemNominal length (mm)
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
L=NL-10
For further explanation > see page 1.7
Screws not included. ^Front connectors determined by order code.
Front
connector Rear
connector
Drawer
side
Drawer
runner
Decorative
cover
A
Bottom panel
B
Back panel
ICW
ECW
ICW - 87 +/-0.5
151
ICW - 75 +/-0.5
L
A
B
ICW - 87 +/-0.5
151
ICW - 75 +/-0.5
L
A
B
Drawer Front Marking Jig for
Tekform Slimline SDW145
655.8018
One set consists of
SDWD-T Mechanism 2 pcs
Drawer sides 2 pcs
Drawer runners 2 pcs
^Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce
SDWD-T Push Open
Mechanism
> see page 1.46
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.21
Tekform Slimline Drawer
192
192
192
192
224
192
224
192
192
192
192
224
192
224
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 198mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Installation dimensions
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
min.
33
min.
49
193
39
32
32
32
9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
A trial mounting is always recommended. For further information please contact Titus Tekform.
1.22
with EasyFix
front connector
Item number for a set
with Screw-in
front connector
Item number for a set
White
Anthracite grey
270 655.8V27 > 655.8G27 > 150.00 185.00
300* 655.8V30 > 655.8G30 > 150.00 185.00
350 655.8V35 > 655.8G35 > 150.00 185.00
400 655.8V40 > 655.8G40 > 150.00 185.00
450 655.8V45 > 655.8G45 > 150.00 185.00
500 655.8V50 > 655.8G50 > 150.00 185.00
550 655.8V55 > 655.8G55 > 150.00 185.00
Tekform Slimline
Drawer SDW145
Soft Close Drawer
Nominal length (mm)
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
One set consists of
Drawer sides 2 pcs
Drawer runners 2 pcs
^Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce L=NL-10
For further explanation > see page 1.7
Screws not included. ^Front connectors determined by order code.
Front
connector Rear
connector
Drawer
side
Drawer
runner
Decorative
cover
A
Bottom panel
B
Back panel
ICW
ECW
ICW - 87 +/-0.5
151
ICW - 75 +/-0.5
L
A
B
ICW - 87 +/-0.5
151
ICW - 75 +/-0.5
L
A
B
Drawer Front Marking Jig for
Tekform Slimline SDW145
655.8018
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.23
Tekform Slimline Drawer
192
192
192
192
224
192
224
192
192
192
192
224
192
224
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 198mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Installation dimensions
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
min.
33
min.
49
193
39
32
32
32
9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
A trial mounting is always recommended. For further information please contact Titus Tekform.
1.24
with EasyFix
front connector
Item number for a set
White
400 655.8Z61 > 150.00.K
450 655.8Z62 > 150.00.K
500 655.8Z63 > 150.00.K
550 655.8Z64 > 150.00.K
Tekform Slimline
Drawer SDWD-T 182
Touch Opening SystemNominal length (mm)
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
L=NL-10
For further explanation > see page 1.7
Screws not included. ^Front connectors determined by order code.
A
Bottom panel
B
Back panel
ICW
ECW
Front
connector Rear
connector
Decorative
cover
Drawer
side
Drawer
runner
B
A
ICW - 87 +/-0.5
183
ICW - 75 +/-0.5
L
B
A
ICW - 87 +/-0.5
183
ICW - 75 +/-0.5
L
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
Drawer Front Marking Jig for
Tekform Slimline SDW182
655.8018
One set consists of
SDWD-T Mechanism 2 pcs
Drawer sides 2 pcs
Drawer runners 2 pcs
^Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce
SDWD-T Push Open
Mechanism
> see page 1.46
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.25
Tekform Slimline Drawer
192
192
192
192
224
192
224
192
192
192
192
224
192
224
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 230mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Installation dimensions
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
A trial mounting is always recommended. For further information please contact Titus Tekform.
1.26
with EasyFix
front connector
Item number for a set
with Screw-in
front connector
Item number for a set
White
Anthracite grey
270 655.8Z27 > 655.8H27 > 150.00 185.00
300* 655.8Z30 > 655.8H30 > 150.00 185.00
350 655.8Z35 > 655.8H35 > 150.00 185.00
400 655.8Z40 > 655.8H40 > 150.00 185.00
450 655.8Z45 > 655.8H45 > 150.00 185.00
500 655.8Z50 > 655.8H50 > 150.00 185.00
550 655.8Z55 > 655.8H55 > 150.00 185.00
Tekform Slimline
Drawer SDW182
Soft Close Drawer
Nominal length (mm)
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
One set consists of
Drawer sides 2 pcs
Drawer runners 2 pcs
^Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce L=NL-10
For further explanation > see page 1.7
Screws not included. ^Front connectors determined by order code.
A
Bottom panel
B
Back panel
ICW
ECW
Front
connector Rear
connector
Decorative
cover
Drawer
side
Drawer
runner
B
A
ICW - 87 +/-0.5
183
ICW - 75 +/-0.5
L
B
A
ICW - 87 +/-0.5
183
ICW - 75 +/-0.5
L
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
Drawer Front Marking Jig for
Tekform Slimline SDW182
655.8018
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.27
Tekform Slimline Drawer
192
192
192
192
224
192
224
192
192
192
192
224
192
224
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 230mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Installation dimensions
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
A trial mounting is always recommended. For further information please contact Titus Tekform.
1.28
with EasyFix
front connector
Item number for a set
White
Anthracite grey
270 655.7P27 > 152.00* 187.00*
350 655.7P35 > 152.00* 187.00*
400 655.7P40 > 152.00 187.00*
450 655.7P45 > 152.00 187.00*
500 655.7P50 > 152.00 187.00*
550 655.7P55 > 152.00* 187.00*
NL
Tekform Slimline
Drawer SDWD-G 70
With Glass
Nominal length (mm)
ICW - 75 +/-0.5
L
A
68
ICW - 87 +/-0.5
B
ICW - 75 +/-0.5
L
A
68
ICW - 87 +/-0.5
B
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
L=NL-10
• 8mm tempered glass sides
• Interchangeable with the Tekform Double Wall
Drawer and Tekform Slimline Drawer
• Titus damper inside
One set consists of
Drawer sides 2 pcs
Drawer runners 2 pcs
Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.29
Tekform Slimline Drawer
192
192
192
192
224
192
224
192
192
192
192
224
192
224
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 115mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Installation dimensions
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
min.
48
32
15.5
NL+3
37
min. 115
min.
48
32
min.
48
32
ø8 +/-0.1x11
min.
33
min.
49
9
20
32
110
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
1.30
Tekform Slimline
Drawer SDWD-G 145
With Glass
with EasyFix
front connector
Item number for a set
White
Anthracite grey
270 655.7S27 > 152.00* 187.00*
350 655.7S35 > 152.00* 187.00*
400 655.7S40 > 152.00 187.00*
450 655.7S45 > 152.00 187.00*
500 655.7S50 > 152.00 187.00*
550 655.7S55 > 152.00* 187.00*
NL
Nominal length (mm)
ICW - 75 +/-0.5
L
A
68
ICW - 87 +/-0.5
B
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
L=NL-10
One set consists of
Drawer sides 2 pcs
Drawer runners 2 pcs
Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce
• 8mm tempered glass sides
• Interchangeable with the Tekform Double Wall
Drawer and Tekform Slimline Drawer
• Titus damper inside
ICW - 87 +/-0.5
151
ICW - 75 +/-0.5
L
A
B
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.31
Tekform Slimline Drawer
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Installation dimensions Drawer runner fixing positions
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 198mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
min.
33
min.
49
193
39
32
32
32
9
64
min.
48
64
min.
48
NL+3
37
min. 198
32
32
32
32
ø8 +/-0.1x11
min.
33
min.
49
32
32
64
min.
48
15.5
193
32
32
32
32
9
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
1.32
Tekform Slimline
Drawer SDWD-G 182
With Glass
with EasyFix
front connector
Item number for a set
White
Anthracite grey
270 655.7T27 > 152.00* 187.00*
350 655.7T35 > 152.00* 187.00*
400 655.7T40 > 152.00 187.00*
450 655.7T45 > 152.00 187.00*
500 655.7T50 > 152.00 187.00*
550 655.7T55 > 152.00* 187.00*
NL
Nominal length (mm)
ICW - 75 +/-0.5
L
A
68
ICW - 87 +/-0.5
B
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
L=NL-10
One set consists of
Drawer sides 2 pcs
Drawer runners 2 pcs
Front connectors 2 pcs
Rear connectors 2 pcs
Covers 2 pcs
2 pcs
Mounting
instructions
1 pce
• 8mm tempered glass sides
• Interchangeable with the Tekform Double Wall
Drawer and Tekform Slimline Drawer
• Titus damper inside
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
B
A
ICW - 87 +/-0.5
183
ICW - 75 +/-0.5
L
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.33
Tekform Slimline Drawer
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Installation dimensions Drawer runner fixing positions
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 230mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
Mounting dimensions for the back panel
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Installation dimensions for the front panel
Minimum space required for the
cabinet
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
8
NL+3
37
min. 230
ø8 +/-0.1x11
225
32
32
32
64
9
min.
33
min.
49
32
32
64
min.
48
15.5
64
min.
48
32
32
64
min.
48
32
32
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
1.34
110
External cabinet width (mm)
Cabinet side
thickness=16mm
Item number
White
Anthracite grey
Front Panel 600 655.8185 > 511.00 515.00
1200 655.8189 > 511.00 515.00
Front Bracket Set 655.8065 > 150.00 185.00
Made of aluminium and plastic
Made of aluminium
Inner Drawer Front for
Tekform Slimline Drawer
SDW70
Front panel support clip
002110.885.300 white
16
Cutting dimension= ICW-100
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.35
Tekform Slimline Drawer
NL+12
46
min. 115
NL+12
46
min. 198
NL+12
46
min. 230
Front panel
Front bracket
ICW
ECW
ICW-90
ICW-92
110
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Minimum space required for the cabinet
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9-1.10
Cutting dimensions details
Use the second hole for runner fixing.
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Installation dimensions Drawer runner fixing positions
1.36
56
50
56
50
56
50
External cabinet width (mm)
Cabinet side
thickness=16mm
Item number
White
Anthracite grey
Frosted glass
Transparent
glass
Inner Drawer Front, Assembly Set 600 655.8285 > 511.00 515.00
Front Panel 600 655.8205 > 511.00 515.00
1200 655.8209 > 511.00 515.00
Low Glass 600 655.8295 > 391.00* 392.00
1200 655.8299 > 391.00* 392.00
Front Bracket Set 655.8305 > 150.00 185.00
Inner Drawer Front for
Tekform Slimline Drawer
SDW70 with Glass
Made of glass
Made of aluminium and plastic
Made of aluminium
16
Made of aluminium and glass
Cutting dimension= ICW-100
Front panel support clip
002110.885.300 white
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.37
Tekform Slimline Drawer
Front panel
Front bracket
ICW
ECW
ICW-90
ICW-92
56
50
NL+12
46
min. 115
NL+12
46
min. 198
NL+12
46
min. 230 ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Minimum space required for the cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9-1.10
Cutting dimensions details
Installation dimensions Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Use the second hole for runner fixing.
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
1.38
20
110
External cabinet width (mm)
Cabinet side
thickness=16mm
Item number
White
Anthracite grey
Inner Drawer Front, Assembly Set 600 655.8190 > 511.00 515.00
1200 655.8194 > 511.00 515.00
Front Bar 600 655.8210 > 511.00 515.00
1200 655.8214 > 511.00 515.00
Front Panel 600 655.8185 > 511.00 515.00
1200 655.8189 > 511.00 515.00
Front Bracket Set 655.8101 > 350.00 385.00
Inner Drawer Front for
Tekform Slimline Drawer
SDW145 with Bar
Made of aluminium
Made of aluminium and plastic
Made of aluminium
16
Made of aluminium and plastic 20
110
20
110
Cutting dimension= ICW-88
20
110
Cutting dimension= ICW-100
Front panel support clip
002110.885.300 white
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.39
Tekform Slimline Drawer
Front panel
Front bracket
ICW
ECW
ICW-90
ICW-92
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Minimum space required for the cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9-1.10
Cutting dimensions details
Installation dimensions Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Use the second hole for runner fixing.
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
NL+12
46
min. 115
NL+12
46
min. 198
NL+12
46
min. 230
20
110
1.40
137
56
137
56
External cabinet width (mm)
Cabinet side
thickness=16mm
Item number
White
Anthracite grey
Frosted glass
Transparent
glass
Inner Drawer Front, Assembly Set 600 655.8200 > 511.00 515.00
Front Panel 600 655.8205 > 511.00 515.00
1200 655.8209 > 511.00 515.00
Front Glass Panel - High 600 655.8220 > 391.00* 392.00
800* 655.8221 > 391.00 392.00
900* 655.8222 > 391.00 392.00
Front Bracket Set 655.8103 > 350.00 385.00
Inner Drawer Front for
Tekform Slimline Drawer
SDW145 with Glass
Made of glass
Made of aluminium and plastic
Made of aluminium
16
Made of aluminium and glass
137
56
Cutting dimension= ICW-100
Front panel support clip
002110.885.300 white
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.41
Tekform Slimline Drawer
Front panel
Front bracket
ICW
ECW
ICW-90
ICW-92
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Minimum space required for the cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9-1.10
Cutting dimensions details
Installation dimensions Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Use the second hole for runner fixing.
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
NL+12
46
min. 115
NL+12
46
min. 198
NL+12
46
min. 230
137
56
1.42
20
110
External cabinet width (mm)
Cabinet side
thickness=16mm
Item number
White
Anthracite grey
Inner Drawer Front, Assembly Set 600 655.8260 > 511.00 515.00
1200 655.8264 > 511.00 515.00
Front Bar 600 655.8210 > 511.00 515.00
1200 655.8214 > 511.00 515.00
Front Panel 600 655.8185 > 511.00 515.00
1200 655.8189 > 511.00 515.00
Front Bracket Set 655.8170 > 350.00 385.00
Inner Drawer Front for
Tekform Slimline Drawer
SDW182 with Bar
Made of aluminium
Made of aluminium and plastic
Made of aluminium
Made of aluminium and plastic 20
110
20
110
Cutting dimension= ICW-88
16
20
110
Cutting dimension= ICW-100
Front panel support clip
002110.885.300 white
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.43
Tekform Slimline Drawer
Front panel
Front bracket
ICW
ECW
ICW-90
ICW-92
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Minimum space required for the cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9-1.10
Cutting dimensions details
Installation dimensions Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Use the second hole for runner fixing.
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
20
110
NL+12
46
min. 115
NL+12
46
min. 198
NL+12
46
min. 230
1.44
56
170
External cabinet width (mm)
Cabinet side
thickness=16mm
Item number
White
Anthracite grey
Frosted glass
Transparent
glass
Inner Drawer Front, Assembly Set 600 655.8270 > 511.00 515.00
Front Panel 600 655.8205 > 511.00 515.00
1200 655.8209 > 511.00 515.00
Front Glass Panel - High 600 655.8280 > 391.00* 392.00
800 655.8281 > 391.00* 392.00
900 655.8282 > 391.00* 392.00
Front Bracket Set 655.8172 > 350.00 385.00
Inner Drawer Front for
Tekform Slimline Drawer
SDW182 with Glass
Made of glass
Made of aluminium and plastic
Made of aluminium
Made of aluminium and glass56
170
56
170
Cutting dimension= ICW-100
16
56
170
Front panel support clip
002110.885.300 white
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.45
Tekform Slimline Drawer
Front panel
Front bracket
ICW
ECW
ICW-90
ICW-92
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Minimum space required for the cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.9-1.10
Cutting dimensions details
Installation dimensions Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Use the second hole for runner fixing.
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
56
170
NL+12
46
min. 115
NL+12
46
min. 198
NL+12
46
min. 230
1.46
Item number
Zinc Plated
Inner Drawer Front, Assembly Set 655.9152.380 > K1
One set consists of: 2 pcs PushOpen
mechanisms (for one drawer application),
4pcs chipboard screws, mounting
instructions
Please note: SDWD-T mechanism set is
included with the purchase of a Slimline
SDWD-T Drawer Kit.
Tekform Slimline
SDWD-T Mechanism
Touch Opening System
for Slimline SDWD-T Drawers 16
272
34
308
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.47
Tekform Slimline Drawer
Mounting details
· Fast and intuitive mounting without pre-drilling
· Reliable and secure closing
· Non-handed design
· Narrow 1.5mm operating gap for evenly aligned fronts
Depth
adjustment
-0.5/+2.5mm
1
2
1
2
1
2
Position both SDWD-T mechanisms
on the bottom of drawer
Align SDWD-T mechanisms with drawer
lip and push to the front panel
Screw on both mechanisms
\"click\"
Place the drawer horizontally on the runners and push towards the cabinet until
you hear the drawer is locked
\"click\"
Push to fully close
+ -
Depth adjustment
1.48
Assembly Instructions
Assembly Sequence
Screws not included
192
192
192
192
224
192
224
192
192
192
192
224
192
224
192
192
192
192
224
192
224
192
192
192
192
224
192
224
Insert the rear connector
vertically (3) and push it
downwards into recess in
the drawer side (4)
Connect the drawer sides to the bottom
panel (1) and fix it with screws (2)
1
3
2
4
6
Insert the back panel (5)
and fix it with screws (6)
5
Chipboard screw
Ø3.5 x 15
Chipboard screw
Ø3.5 x 15
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.49
Tekform Slimline Drawer
Insertion of Front Connectors
Screws not included
Chipboard screw
Ø3.5 x 15
90º
Insert the front connectors
into holes on the front panel Front connector
Turn the screws 90º 90º turn
into locked position
Front panel
EasyFix
192
192
192
192
224
192
224
Screw-in fixing
Use Ø3.5 x 15mm screws for fixing
Front panel
Front connector
Chipboard screw
Ø3.5 x 15
1.50
Assembly Instructions
Front Panel Mounting / Removal
Mounting
Attach the front panel to the drawer and
press to click
Removal
Turn the screw towards
the front panel
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.51
Tekform Slimline Drawer
Draw Insertion / Removal
Screws not included
Removal
Press-up the button under the drawer.
Keep pressed to pull the drawer out
Insertion
Place the drawer horizontally
on the runners and push
towards the cabinet until
you hear the drawer is locked
Push to fully close until drawer
clicks. Pull drawer out and push to
fully close again until drawer clicks
twice
Press-up
1.52
Tekform Drawer
Product Guide
Page
1.64
1.68
1.74
1.76
1.72
1.66
1.62
Tekform Drawer
Inner Drawer Fronts
Tekform Drawer DW70
Tekform Drawer DW113
Tekform Drawer DW145
Tekform Drawer DW182
For DW145 with
Square Bar
For DW182 with
Square Bar
For DW70
1.53
1.79
1.70
1.80
1.81
1.78
Accessories
Glass Sides 8mm
Industrial Packaging
Drawer Storage System
Assembly and Mounting
Glass Sides 4mm
1.54
Tekform Double
Wall Drawer
User friendly mounting
· Intuitive installation instructions
· Easy assembly and disassembly
of the drawer
‘EasyFix’ front
panel connector
· Hand insertion
· Quarter turn lock
· Repeatable assembly and
disassembly possible
Superior vertical and
horizontal stability of rails
· Smooth and silent operation
· Reliable drawer opening
and closing
· Improved drawer stability
in open position
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.55
Tekform Double Wall Drawer
Tekform Double
Wall Drawer
Integrated Titus damper
· Life-long reliable closing
· Consistent damping at various
closing speeds
· Consumer-preferred
‘ConfidentClose’
Precise drawer alignment
· Tekform Drawer provides a
+/- 1mm tolerance on drawer
bottom width
· Intuitive drawer front adjustment
Quality certified
· By European specialised
institutions
Tekform Double Wall Drawer
1.56
Technical Guide
Tekform Drawer
Information
90º
MINIMAL SPACE REQUIRED
standard DWD 70 145 182
70 145 182
37 37
NL+min.12 NL+min.12
min. 193min. 193
min. 224
37
NL+min.12
min. 115
37
NL+min.3
min. 105
37
NL+min.3
min. 185
37
NL+min.3
min. 224
D
H
How to choose the
appropriate drawer
dimension?
How to fix drawer sides
to the front panel?
‘EasyFix’ front
connector
Screw-in front
connector
Select Tekform Drawer size based on
available cabinet space. Please refer to
the below chart with indicated minimum
space required in cabinet to choose
appropriate drawer system.
· Hand insertion
· Quarter turn locking system
· Expandable plastic dowel
· Easy assembly and disassembly
of front panel
· Reliable connection
· Fixing with Ø3.5x15mm screw
(screws are not included)
Tekform Drawer nominal length (NL) in mm:
NL 270 300 350 400 450 500 550
Front connector
Front connector
Tekform Drawer Tekform Drawer
with inner front
Min. height (H)
required
Cabinet
depth (D)
Min. height (H)
required
Cabinet
depth (D)
Tekform Drawer
DW70 105mm NL+min 3mm 115mm NL+min 12mm
Tekform Drawer
DW113 160mm NL+min 3mm NA NA
Tekform Drawer
DW145 185mm NL+min 3mm 193mm NL+min 12mm
Tekform Drawer
DW182 224mm NL+min 3mm 224mm NL+min 12mm
The Tekform Drawer is available with
‘EasyFix’ or screw-in front connectors.
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.57
Tekform Double Wall Drawer
Technical Guide
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
H
Tekform Drawer nominal length (NL) in mm:
NL 270 300 350 400 450 500 550
Bottom panel and
back panel cutting
dimensions
Dimensions of bottom and back
panel depends on:
· Cabinet width
· Nominal drawer length
· Drawer height
Cabinet width
H back panel
DW70 68
DW113 119
DW145 151
DW182 183
Back panel cutting
dimension
Back panel height depends on the
selected drawer height.
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Bottom panel cutting
dimensions
NL 270 300 350 400 450 500 550
L 260 290 340 390 440 490 540
NL= Tekform Drawer nominal length (in mm)
1.58
Technical Guide
Tekform Drawer
Information
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
192
192
192
192
224
192
224
40kg
Expanded
tolerances
Tekform Drawer provides expanded
tolerances in cabinet construction and
enables:
· Precise drawer alignment
· Smooth and silent operation
· Improved drawer stability in open
position
· Tolerance of +/-1mm on botton panel
width size
How to choose the
appropriate drawer
runner fixing positions?
Drawer fixing positions depend on
the drawer front type.
Tekform Drawer with
standard front
When a standard drawer front is applied,
use the third hole on the drawer runner
for fixing.
Tekform Drawer with
inner front
When an inner drawer front is applied,
use the second hole on the drawer runner
for fixing.
Load capacity Tekform Drawer load capacity is 40kg.
Front side
Front side
Internal cabinet width
tolerance +/- 1mm
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.59
Tekform Double Wall Drawer
Adjustments
Side adjustment is done via the
adjustment screw on the drawer side.
Tighten screw to adjust.
Height adjustment is done via the cam.
Release the locking screw and tighten it
back after the front is adjusted.
+/- 1mm
+/- 2mm
Side adjusment
Height adjustment
Release
Adjust
Tighten
Adjustment needs to be done
on both sides of the drawer
1.60
Adjustments
Tekform Drawer
Information
Adjustment needs to be done
on both sides of the drawer
Depth adjustment is done through the
connecting bar.
Please note: connecting bars can't be
used with the 8mm thick glass sides.
+/- 2mm
Bar length adjustment
+/- 2mm
Depth adjustment
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.61
Tekform Double Wall Drawer
Key Design Choices
'ConfidentClose' Fast closing
Late start of deceleration action
Quiet landing
Damping action
Titus hydraulic damper
CAF Consumer
Assembly Friendliness
Even and smooth soft closing action.
· Soft and reliable closing
Designed and produced in-house.
· Reliable and consistent life-long
damping
· Smooth closing
· Dampers’ consistency over high volume
production runs assured
· 100% automated quality check
‘EasyFix’ front panel connector with
expandable plastic dowel provides:
· Quick, tool-free insertion
· Quarter turn lock
· Repeatable assembly and
disassembly
Flat damping curve shows the uniform action
produced during damper closing at a defined speed.
Damping
force
Stroke
90º
Front connector
1.62
Nominal length (mm)
with EasyFix
front connector
Item number for a set
White
Anthracite grey
270 650.8027 > 150 185*
300* 650.8030 > 150 185*
350 650.8035 > 150 185*
400 650.8040 > 150 185*
450 650.8045 > 150 185*
500 650.8050 > 150 185*
550 650.8055 > 150 185*
Assembly instructions > see page 1.81
Tekform Drawer
DW70
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
68
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
L=NL-10
For further explanation > see page 1.56
**Supplied with EasyFix connectors. Order Screw-in connectors separately > 650.8905.380
Screws not included
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.63
Tekform Double Wall Drawer
Minimum space required for the cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.59-1.60
Installation dimensions Drawer runner fixing positions
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 105mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
MINIMAL SPACE REQUIRED
standard DWD 70 145 182
70 145 182
37 37
NL+min.12 NL+min.12
min. 193min. 193
min. 224
37
NL+min.12
min. 115
37
NL+min.3
min. 105
37
NL+min.3
min. 185
37
NL+min.3
min. 224
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
min.105
101
16
2032
ø10 +/-0.1
±0.5
32 min. 56
15.5
11
min.
33
min.
47.5
32
32 min. 56
37.5
9
min.105
101
16
2032
ø10 +/-0.1
±0.5
32 min. 56
15.5
11
min.
33
min.
47.5
32
32 min. 56
37.5
9
min.105
101
16
2032
ø10 +/-0.1
±0.5
32 min. 56
15.5
11
min.
33
min.
47.5
32
32 min. 56
37.5
9
min.105
101
16
2032
ø10 +/-0.1
±0.5
32 min. 56
15.5
11
min.
33
min.
47.5
32
32 min. 56
37.5
9
Mounting dimensions for the back panel
Installation dimensions for the front panel
A trial mounting is always recommended. For further information please contact Titus Tekform.
192
192
192
192
224
192
224
192
192
192
192
224
192
224
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
1.64
Nominal length (mm)
with EasyFix
front connector
Item number for a set (DW70 + Bracket + Square Bar)
270 650.8027.150 + 650.8911.150 + 650.8727.150
350 650.8035.150 + 650.8911.150 + 650.8735.150
400 650.8040.150 + 650.8911.150 + 650.8740.150
450 650.8045.150 + 650.8911.150 + 650.8745.150
500 650.8050.150 + 650.8911.150 + 650.8750.150
550 650.8055.150 + 650.8911.150 + 650.8755.150
* Available upon special request
Assembly instructions > see page 1.81
Tekform Drawer
DW113
68
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
L=NL-10
For further explanation > see page 1.56
**Supplied with EasyFix connectors. Order Screw-in connectors separately > 650.8905.380
Screws not included
Rear
connector
Rear
connector
Drawer
side
Drawer
runner
Drawer
runner
Connecting bar
Connecting bar
Front
connector
Decorative
cover
Front
connector
Decorative
cover
Drawer
side
11
A
Bottom panel
B
Back panel
ICW
ECW
min. 160
15.5
32
min.
47.5
min.
49
Ø10+/-0.1
32
64
min.
56
min.
33
32
32
149
35
37
NL+3
B
A
ICW - 87 +/-0.5
119
ICW - 75 +/-0.5
L
11
A
Bottom panel
B
Back panel
ICW
ECW
min. 160
15.5
32
min.
47.5
min.
49
Ø10+/-0.1
32
64
min.
56
min.
33
32
32
149
35
37
NL+3
B
A
ICW - 87 +/-0.5
119
ICW - 75 +/-0.5
L
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.65
Tekform Double Wall Drawer
Minimum space required for the cabinet
For further explanation > see page 1.59-1.60
Installation dimensions Drawer runner fixing positions
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 160mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Drilling dimensions for the front panel
EasyFix attachment
Mounting dimensions for the back panel
Installation dimensions for the front panel
A trial mounting is always recommended. For further information please contact Titus Tekform.
11
A
Bottom panel
B
Back panel
ICW
ECW
min. 160
15.5
32
min.
47.5 min.
49
Ø10+/-0.1
32
64
min.
56
min.
33
32
32
149
35
37
NL+3
B
A
ICW - 87 +/-0.5
119
ICW - 75 +/-0.5
L
11
A
Bottom panel
B
Back panel
ICW
ECW
min. 160
15.5
32
min.
47.5 min.
49
Ø10+/-0.1
32
64
min.
56
min.
33
32
32
149
35
37
NL+3
B
A
ICW - 87 +/-0.5
119
ICW - 75 +/-0.5
L 11
A
Bottom panel
B
Back panel
ICW
ECW
min. 160
15.5
32
min.
47.5 min.
49
Ø10+/-0.1
32
64
min.
56
min.
33
32
32
149
35
37
NL+3
B
A
ICW - 87 +/-0.5
119
ICW - 75 +/-0.5
L
11
A
Bottom panel
B
Back panel
ICW
ECW
min. 160
15.5
32
min.
47.5 min.
49
Ø10+/-0.1
32
64
min.
56
min.
33
32
32
149
35
37
NL+3
B
A
ICW - 87 +/-0.5
119
ICW - 75 +/-0.5
L
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+/-2mm
192
192
192
192
224
192
224
192
192
192
192
224
192
224
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
1.66
Nominal length (mm)
with EasyFix
front connector
Item number for a set
White
Anthracite grey
270 650.8127 > 150K 185*
300* 650.8130 > 150K 185*
350 650.8135 > 150K 185*
400 650.8140 > 150K 185*
450 650.8145 > 150K 185*
500 650.8150 > 150K 185*
550 650.8155 > 150K 185*
Assembly instructions > see page 1.81
Tekform Drawer
DW145
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
L=NL-10
For further explanation > see page 1.56
**Supplied with EasyFix connectors. Order Screw-in connectors separately > 650.8905.380
Screws not included
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Rear
connector
Rear
connector
Drawer
side
Drawer
runner
Drawer
runner
Connecting bar
Connecting bar
Front
connector
Decorative
cover
Front
connector
Decorative
cover
Drawer
side
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
One set consists of
Drawer sides 2 pcs
Drawer runner 2 pcs
Connecting bars 2 pcs
*Front connectors 2 pcs
Rear connectors 2 pcs
Decorative covers 2 pcs
Mounting
instructions
1 pce
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.67
Tekform Double Wall Drawer
Minimum space required for the cabinet
Installation dimensions Drawer runner fixing positions
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Mounting dimensions for the back panel
Installation dimensions for the front panel
A trial mounting is always recommended. For further information please contact Titus Tekform.
For further explanation > see page 1.59-1.60
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 185mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+/-2mm
MINIMAL SPACE REQUIRED
standard DWD 70 145 182
70 145 182
37 37
NL+min.12 NL+min.12
min. 193min. 193
min. 224
37
NL+min.12
min. 115
37
NL+min.3
min. 105
37
NL+min.3
min. 185
37
NL+min.3
min. 224
min.185
15.5
37.5±0.5
180
39323232
9
16 min.
33
ø10 +/-0.1
96 min.
56
32
96 min.
56
32
11
min.
47.5
32
min.185
15.5
37.5±0.5
180
39323232
9
16 min.
33
ø10 +/-0.1
96 min.
56
32
96 min.
56
32
11
min.
47.5
32
min.185
15.5
37.5±0.5
180
39323232
9
16 min.
33
ø10 +/-0.1
96 min.
56
32
96 min.
56
32
11
min.
47.5
32
min.185
15.5
37.5±0.5
180
39323232
9
16 min.
33
ø10 +/-0.1
96 min.
56
32
96 min.
56
32
11
min.
47.5
32
192
192
192
192
224
192
224
192
192
192
192
224
192
224
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
1.68
Nominal length (mm)
with EasyFix
front connector
Item number for a set
White
Anthracite grey
270 650.8227 > 150K 185*
300* 650.8230 > 150K 185*
350 650.8235 > 150K 185*
400 650.8240 > 150K 185*
450 650.8245 > 150K 185*
500 650.8250 > 150K 185*
550 650.8255 > 150K 185*
Assembly instructions > see page 1.81
Tekform Drawer
DW182
Cutting dimensions details
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
L=NL-10
For further explanation > see page 1.56
**Supplied with EasyFix connectors. Order Screw-in connectors separately > 650.8905.380
Screws not included
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
One set consists of
Drawer sides 2 pcs
Drawer runner 2 pcs
Connecting bars 2 pcs
*Front connectors 2 pcs
Rear connectors 2 pcs
Decorative covers 2 pcs
Mounting
instructions
1 pce
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Front
connector
Rear
connector
Drawer
side
Drawer
runner
A
Bottom panel
B
Back panel
ICW
ECW
B
A
ICW - 87 +/-0.5
ICW - 75 +/-0.5
min.105
min. 33
15.5
32
min.
47.5
32
20
min.
47.5
min.
49
10.5
10+/-0.1
32
L
Decorative
cover
Rear
connector
Rear
connector
Drawer
side
Drawer
runner
Drawer
runner
Connecting bar
Connecting bar
Front
connector
Decorative
cover
Front
connector
Decorative
cover
Drawer
side
183
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.69
Tekform Double Wall Drawer
Minimum space required for the cabinet
Installation dimensions Drawer runner fixing positions
Drilling dimensions for the front panel
EasyFix attachment Screw-in attachment
Mounting dimensions for the back panel
Installation dimensions for the front panel
A trial mounting is always recommended. For further information please contact Titus Tekform.
For further explanation > see page 1.59-1.61
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 224mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+/-2mm
MINIMAL SPACE REQUIRED
standard DWD 70 145 182
70 145 182
37 37
NL+min.12 NL+min.12
min. 193min. 193
min. 224
37
NL+min.12
min. 115
37
NL+min.3
min. 105
37
NL+min.3
min. 185
37
NL+min.3
min. 224
min. 224
212
16min.
33
9
32643232
±0.5 37.5
min.
47.5
32
15.5
128 min.
56
32
ø10
11
+/-0.1
128 min.
56
32
8
min. 224
212
16min.
33
9
32643232
±0.5 37.5
min.
47.5
32
15.5
128 min.
56
32
ø10
11
+/-0.1
128 min.
56
32
8
min. 224
212
16min.
33
9
32643232
±0.5 37.5
min.
47.5
32
15.5
128 min.
56
32
ø10
11
+/-0.1
128 min.
56
32
8
min. 224
212
16min.
33
9
32643232
±0.5 37.5
min.
47.5
32
15.5
128 min.
56
32
ø10
11
+/-0.1
128 min.
56
32
8
192
192
192
192
224
192
224
192
192
192
192
224
192
224
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
1.70
External cabinet width (mm)
Item number
Zinc plated
White
Anthracite grey
Drawer Runner 270* 660.8A27 > 040
300* 660.8A30 > 040
350* 660.8A35 > 040
400* 660.8A40 > 040
450* 660.8A45 > 040
500 660.8A50 > 040
550* 660.8A55 > 040
270* 660.8B27 > 040
300* 660.8B30 > 040
350* 660.8B35 > 040
400* 660.8B40 > 040
450* 660.8B45 > 040
500 660.8B50 > 040
550* 660.8B55 > 040
Drawer Side
270* 660.8C27 > 150 185*
300* 660.8C30 > 150 185*
350* 660.8C35 > 150 185*
400* 660.8C40 > 150 185*
450* 660.8C45 > 150 185*
500 660.8C50 > 150 185*
550* 660.8C55 > 150 185*
270* 660.8D27 > 150 185*
300* 660.8D30 > 150 185*
350* 660.8D35 > 150 185*
400* 660.8D40 > 150 185*
450* 660.8D45 > 150 185*
500 660.8D50 > 150 185*
550* 660.8D55 > 150 185*
Tekform Drawer
Industrial Packaging
Right
Right
Left
Left
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.71
Tekform Double Wall Drawer
External cabinet width (mm)
Item number
White
Anthracite grey
Square Side Bar 270 650.8727 > 150 185*
300* 650.8730 > 150 185*
350 650.8735 > 150 185*
400 650.8740 > 150 185*
450 650.8745 > 150 185*
500 650.8750 > 150 185*
550 650.8755 > 150 185*
650.8025
Rear Connectors 650.8901 > 150 185*
650.8911 > 150
650.8902 > 150 185*
650.8903 > 150 185*
Front Connectors 650.8907 > 380*
650.8905 > 380*
Decorative Cover 650.8904 > 350 385*
650.8906 > 350 385*
For DW70
EasyFix
Tekform by Titus
For DW145
Screw-In
Generic
For DW182
For further explanation > see page 1.59-1.60
· Drawer runner type Full extension
· Load capacity 40kg
· Minimum height space required 224mm
· Wooden back panel thickness 16mm
· Wooden bottom panel thickness 16mm
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+/-2mm
EasyFix Screw-In
All bulk packaging parts are available upon special request.
A trial mounting is always recommended. For further information please contact Titus Tekform.
For DW113
Drawer Front Marking Jig for Tekform
DWD
1.72
Length (mm)
Item number
White
Anthracite grey
Front Panel 600* 650.8565 > 511 515*
1200 650.8569 > 511 515*
Front Bracket Set DW70
(L+R)
650.8912 > 350 385*
Inner Drawer Front
for Tekform Drawer DW70
Made of aluminium and plastic
Made of aluminium
L
Front panel
Front bracket
ICW
ECW
L
L
100
100
Cutting dimension= ICW-90
Assembly details > see page 1.81
Assembly details > see page 1.81
Front panel support clip
002110.885.300 white
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.73
Tekform Double Wall Drawer
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Minimum space required for the cabinet
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
For further explanation > see page 1.59-1.60
Cutting dimensions details
Installation dimensions Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Use the second hole for runner fixing.
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Front panel
Front bracket
ICW
ECW
ICW-90
ICW-92
MINIMAL SPACE REQUIRED
standard DWD 70 145 182
70 145 182
37 37
NL + 12 NL + 12
min. 193min. 193
min. 224
37
NL+min.12
min. 115
37
NL + 3
min. 105
37
NL + 3
min. 185
37
NL + 3
min. 224
Front panel
Front bracket
ICW
ECW
ICW-90
ICW-92
A trial mounting is always recommended. For further information please contact Titus Tekform.
1.74
Length (mm)
Item number
White
Antrhacite grey
Front Panel 600* 650.8565 > 511 515*
1200 650.8569 > 511 515*
Front Bracket Set (L+R)
DW145
650.8914 > 350 385*
Square Bar 600* 650.8600 > 511 515*
1200 650.8604 > 511 515*
Made of aluminium
Made of aluminium and plastic
Made of aluminium
L
Assembly details > see page 1.81
Assembly details > see page 1.81
Inner Drawer Front
for Tekform Drawer DW145
With Square Bar
Cutting dimension= ICW-98
Cutting dimension= ICW-98
Front panel
Front bracket
ICW
ECW
L
L
100
100
Front panel
Front bracket
ICW
ECW
L
20
L
20
Front panel support clip
002110.885.300 white
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.75
Tekform Double Wall Drawer
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Minimum space required for the cabinet
Cutting dimensions details
Installation dimensions Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Use the second hole for runner fixing.
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Front panel
Front bracket
ICW
ECW
ICW-90
ICW-92
A trial mounting is always recommended. For further information please contact Titus Tekform.
For further explanation > see page 1.59-1.60
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+/-2mm
Front panel Front bracket
Front panel Front bracket
Square bar
Square bar
MINIMAL SPACE REQUIRED
standard DWD 70 145 182
70 145 182
37 37
NL+min.12 NL+min.12
min. 193
min. 224
37
NL+min.12
min. 115
37
NL+min.3
min. 105
37
NL+min.3
min. 185
37
NL+min.3
min. 224
1.76
Length (mm)
Item number
White
Anthracite grey
Front Panel 600* 650.8565 > 511 515*
1200 650.8569 > 511 515*
Front Bracket Set (L+R)
DW182
650.8916 > 350 385*
Square Bar 600* 650.8600 > 511 515*
1200 650.8604 > 511 515*
Made of aluminium
Made of aluminium and plastic
Made of aluminium
L
Assembly details > see page 1.81
Assembly details > see page 1.81
Inner Drawer Front
for Tekform Drawer DW182
With Square Bar
Cutting dimension= ICW-98
Cutting dimension= ICW-98
Front panel
Front bracket
ICW
ECW
L
L
100
100
Front panel
Front bracket
ICW
ECW
L
L
20 20
Front panel support clip
002110.885.300 white
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.77
Tekform Double Wall Drawer
ECW: External cabinet width
ICW: Internal cabinet width
NL: Nominal length of drawer
Minimum space required for the cabinet
Cutting dimensions details
Installation dimensions Drawer runner fixing positions
Chipboard screw
Ø3.5 x 15
Euroscrew
Ø6.3 x 13
Use the second hole for runner fixing.
NL=270 mm
NL=300 mm
NL=350 mm
NL=400 mm
NL=450 mm
NL=500 mm
NL=550 mm
Front panel
Front bracket
ICW
ECW
ICW-90
ICW-92
A trial mounting is always recommended. For further information please contact Titus Tekform.
For further explanation > see page 1.59-1.60
Side
adjustment
+1/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+/-2mm
Front panel Front bracket
Front panel Front bracket
Square bar
Square bar
MINIMAL SPACE REQUIRED
standard DWD 70 145 182
70 145 182
37 37
NL+min.12 NL+min.12
min. 193min. 193
min. 224
37
NL+min.12
min. 115
37
NL+min.3
min. 105
37
NL+min.3
min. 185
37
NL+min.3
min. 224
1.78
Nominal length (mm)
Item number
Frosted glass
White
Anthracite grey
For DW145 400 650.8404 > 391
450 650.8405 > 391
500 650.8406 > 391
550 650.8407 > 391
650.8484 > 350 385*
Assembly instructions > see page 1.81
Glass side set = 2 pcs
Glass clip set = 2 pcs L + 2 pcs R
For DW182 400 650.8440 > 391
450 650.8445 > 391
500 650.8450 > 391
550 650.8455 > 391
650.8485 > 350 385*
Assembly instructions > see page 1.81
Glass side set = 2 pcs
Glass clip set = 2 pcs L + 2 pcs R
Accessories
Glass Sides 4mm · 4mm glass sides must be applied with
drawer side bars
· Tempered glass for improved user safety
· Depth front adjustment through side bars
enabled
NL
Front panel
Front bracket
ICW
ECW
L
94
94 64
Glass side
Glass side
Glass clip
Glass clip
Made of tempered glass, glass clip made of plastic
Made of tempered glass, glass clip made of plastic
Glass side set
Glass side set
Glass clip set
Glass clip set
Front panel
Front bracket
ICW
ECW
L
94
94 64
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.79
Tekform Double Wall Drawer
Front panel
Front bracket
ICW
ECW
70 110
Front panel
Front bracket
ICW
ECW
70 110
Nominal length (mm)
Item number
Frosted glass
White
Anthracite grey
For DW145 400 650.8463 > 391
450 650.8464 > 391
500 650.8465 > 391
550 650.8466 > 391
650.8488 > 350 385*
Assembly instructions > see page 1.81
Glass side set = 2 pcs
Glass clip set = 2 pcs L + 2 pcs R
For DW182 400 650.8470 > 391
450 650.8471 > 391
500 650.8472 > 391
550 650.8473 > 391
650.8489 > 350 385*
Assembly instructions > see page 1.81
Glass side set = 2 pcs
Glass clip set = 2 pcs L + 2 pcs R
Accessories
Glass Sides 8mm · 8mm glass sides don’t require side bars
· Tempered glass for improved user safety
NL
Glass side
Glass side
Glass clip
Glass clip
Made of tempered glass, glass clip made of plastic
Made of tempered glass, glass clip made of plastic
Glass side set
Glass side set
Glass clip set
Glass clip set
1.80
Nominal length (mm)
Item number
White
Anthracite grey
600 650.8706 > 511 515*
1200 650.8712 > 511 515*
650.8703 > 511 515*
650.8704 > 511 515*
Accessories
Drawer Storage System
NL
Made of aluminium and plastic
Drawer Storage System
for DW145
Riser
Divider
Divider fitting
Divider
Divider fitting
Riser
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.81
Tekform Double Wall Drawer
Assembly Instructions
Assembly Sequence
Connect the drawer sides to the bottom
panel (1) and fix it with screws (2)
Insert the rear connector
vertically (3) and push it
downwards into recess in
the drawer side (4)
Insert the back panel (5)
and fix it with screws (6)
Screws not included
192
192
192
192
224
192
224
192
192
192
192
224
192
224
192
192
192
192
224
192
224
192
192
192
192
224
192
224
1
3
2
4
5 6
Chipboard screw
Ø3.5 x 15
Chipboard screw
Ø3.5 x 15
1.82
Assembly Instructions
Insertion of Front Connectors
EasyFix
Insert the front connectors
into holes on the front panel
Turn the screws for 90º
into locked position
Screw-in fixing
Use Ø3.5 x 15mm screws for fixing
Screws not included
192
192
192
192
224
192
224
90º
Front
panel
Front connector
90º turn
Front
panel
Front connector
Chipboard screw
Ø3.5 x 15
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.83
Tekform Double Wall Drawer
Assembly Instructions
Front Panel Mounting / Removal
Mounting
Attach the front panel to the drawer
and press to click
Removal
Rotate to disengage
1.84
Assembly Instructions
Drawer Insertion & Removal
Insertion
Put the drawer horizontally
on the runners and push
towards the cabinet until
you hear the drawer is locked
Push to fully close
Removal
Press the button under a drawer
keep pressed to pull the drawer out
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.85
Tekform Double Wall Drawer
Assembly Instructions
Side / Height Adjustment
Side Adjustment
The side adjustment enables drawer front
alignment with the side of the cabinet and
perfect lifetime opening and closing of
the drawer.
To align the drawer front with the cabinet
side, rotate the adjustment screw.
Height Adjustment
Height adjustment enables perfect
vertical positioning of the drawer.
To align the drawer front, release the
locking screw (1), rotate the excentric
dowel (2) and tighten the locking screw
back (3).
3
3
+/- 2 mm
3
3
+/- 1 mm
3
3
3
3
Release
Adjust
Tighten
Adjustment needs to be done
on both sides of the drawer.
1.86
Accessories Mounting
Mounting of Connecting Bars and Glass Sides 4mm
Glass Sides 4mm
Connecting Bars
(for DW145 and DW182)
Bar length adjustment
+/- 2 mm
1
3
2
4
5 6
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.87
Tekform Double Wall Drawer
Mounting of Glass Sides 8mm
Glass Sides 8mm
Drilling dimension for
Glass Sides 8mm
Back panel mounting
dimensions
Front panel drilling
dimensions
‘EasyFix’ front connector
Installation dimensions
for front panel
Screws not included
1
3
2
4
5 6
Tekform Drawer DW145 Tekform Drawer DW182
1.88
Accessories Mounting
Assembly of Inner Drawer Front
DW145 and DW182 with
Square Connecting Bar
DW70
1.89
Tekform Single Wall Drawer
Product Guide
Page
1.94
1.98
1.101
1.100
1.96
1.92
Tekform Single Wall Drawer
Accessories
Tekform Drawer SW85
Tekform Drawer SW117
Tekform Drawer SW150
Tekform Drawer SW200
Round Railings
Front Clips
1.90
Tekform Single
Wall Drawer
Quality certified
• By European specialised
institutions
• Level 5 Heavy Domestic
• CATAS
• FIRA
Lifetime warranty
• 50,000 cycle tested lifetime
warranty
User friendly mounting
• Intuitive installation instructions
• Easy assembly and disassembly
of the drawer
• Assembly equipment available
Precise drawer alignment
• Huge vertical cam adjustment
• Provides a total +/- 4mm adjustment
• Side adjustment +/- 1.5mm
Easy front fixing
• Front clips available for all drawer
fixing methods
• Spring loaded action for easy
location of the drawer front
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.91
Tekform Single Wall Drawer
Tekform Single
Wall Drawer
Tekform Drawer SW85 Tekform Drawer SW117
Tekform Drawer SW150 Tekform Drawer SW200
Versatile and Reliable
The Single Wall Tekform Drawer is the perfect solution to solve kitchen, wardrobe and bathroom
vanity drawer applications. Both strong and affordable, the drawer’s fluid sliding movement is due
to the use of a roller slide system, whilst the epoxy coating makes it silent during operation. The
product is available in a large range of heights and depths. The immediate vertical adjustment
makes the drawer very versatile and easy to use; it is also ideal both for automatic and manual
assembly.
1.92
Nominal length (mm)
Item number
White
500 603.8C68.050 > 150
250 603.8C62.025 > 150
270 603.8C62.027 > 150
350 603.8C62.035 > 150
400 603.8C62.040 > 150
450 603.8C62.045 > 150
500 603.8C62.050 > 150
550 603.8C62.055 > 150
One set consists of
Drawer
Sides
2
pcs
Drawer
Runner
2
pcs
Tekform Drawer
SW85
Cutting dimensions details
NL
Machine insertion
C15 assembly
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
• Large range of dimensions from 250mm to 550mm depth
• Screw-on, dowel fixing machine insertion ready or C15 assembly options
• Simple bottom mounting for ease of assembly
• Unilateral restraint-guide compensates for tolerances
Drawer side
Front clip
Drawer runner
Push latch > Titus Dampers Titusoft MD > Titus Dampers Front clips > page 1.100
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.93
Tekform Single Wall Drawer
Front panel drilling pattern
Side
adjustment
+/- 1.5mm
Height
adjustment
+/- 2.5mm
Installation dimensions and drilling patterns Drawer runner fixing positions
· Drawer runner type Single extension roller
· Load capacity 25kg
· Minimum height space required 106.5mm
· Wooden back panel thickness 12-18mm
Back panel drilling pattern
Installation and back panel dimensions
Drawer runner mounting
Fixing screws for front brackets
and drawer runner
Euro Screws
611.8E23.363.813
Chipboard screws
611.8K16.240.016
Bottom panel width
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
1.94
Nominal length (mm)
Item number
White
250 603.8C72.025 > 150
270 603.8C72.027 > 150
350 603.8C72.035 > 150
400 603.8C72.040 > 150
450 603.8C72.045 > 150
500 603.8C72.050 > 150
550 603.8C72.055 > 150
One set consists of
Drawer
Sides
2
pcs
Drawer
Runner
2
pcs
Tekform Drawer
SW117
Cutting dimensions details
NL
C15 assembly
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
• Large range of dimensions from 250mm to 550mm depth
• Screw-on, dowel fixing machine insertion ready or C15 assembly options
• Simple bottom mounting for ease of assembly
• Unilateral restraint-guide compensates for tolerances
Push latch > page Titus Dampers Titusoft MD > Titus Dampers Front clips > page 1.100
Drawer side
Front clip
Drawer runner
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.95
Tekform Single Wall Drawer
Front panel drilling pattern
Side
adjustment
+/- 1.5mm
Height
adjustment
+/- 2.5mm
Installation dimensions and drilling patterns Drawer runner fixing positions
· Drawer runner type Roller sides
· Load capacity 25kg
· Minimum height space required 138.5mm
· Wooden back panel thickness 12-18mm
Back panel drilling pattern
Installation and back panel dimensions
Drawer runner mounting
Fixing screws for front brackets
and drawer runner
Euro Screws
611.8E23.363.813
Chipboard screws
611.8K16.240.016
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
Bottom panel width
1.96
Nominal length (mm)
Item number
White
250 603.8C82.025 > 150
270 603.8C82.027 > 150
350 603.8C82.035 > 150
400 603.8C82.040 > 150
450 603.8C82.045 > 150
500 603.8C82.050 > 150
550 603.8C82.055 > 150
One set consists of
Drawer
Sides
2
pcs
Drawer
Runner
2
pcs
Tekform Drawer
SW150
Cutting dimensions details
NL
C15 assembly
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
• Large range of dimensions from 250mm to 550mm depth
• Screw-on, dowel fixing machine insertion ready or C15 assembly options
• Simple bottom mounting for ease of assembly
• Unilateral restraint-guide compensates for tolerances
Push latch > page Titus Dampers Titusoft MD > Titus Dampers Front clips > page 1.100
Drawer side
Front clip
Drawer runner
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.97
Tekform Single Wall Drawer
Front panel drilling pattern
Side
adjustment
+/- 1.5mm
Height
adjustment
+/- 2.5mm
Installation dimensions and drilling patterns Drawer runner fixing positions
· Drawer runner type Roller sides
· Load capacity 25kg
· Minimum height space required 170.5mm
· Wooden back panel thickness 12-18mm
Back panel drilling pattern
Installation and back panel dimensions
Drawer runner mounting
Fixing screws for front brackets
and drawer runner
Euro Screws
611.8E23.363.813
Chipboard screws
611.8K16.240.016
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
Bottom panel width
1.98
Nominal length (mm)
Item number
White
250 603.8C92.025 > 150
270 603.8C92.027 > 150
350 603.8C92.035 > 150
400 603.8C92.040 > 150
450 603.8C92.045 > 150
500 603.8C92.050 > 150
550 603.8C92.055 > 150
One set consists of
Drawer
Sides
2
pcs
Drawer
Runner
2
pcs
Tekform Drawer
SW200
Cutting dimensions details
NL
C15 assembly
ECW: External cabinet width
ICW:Internal cabinet width
NL: Nominal length of drawer
• Large range of dimensions from 250mm to 550mm depth
• Screw-on, dowel fixing machine insertion ready or C15 assembly options
• Simple bottom mounting for ease of assembly
• Unilateral restraint-guide compensates for tolerances
Push latch > Titus Dampers Titusoft MD > Titus Dampers Front clips > page 1.100
Drawer side
Front clip
Drawer runner
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.99
Tekform Single Wall Drawer
Front panel drilling pattern
Side
adjustment
+/- 1.5mm
Height
adjustment
+/- 2.5mm
Installation dimensions and drilling patterns Drawer runner fixing positions
· Drawer runner type Roller sides
· Load capacity 25kg
· Minimum height space required 233.5mm
· Wooden back panel thickness 12-18mm
Back panel drilling pattern
Installation and back panel dimensions
Drawer runner mounting
Fixing screws for front brackets
and drawer runner
Euro Screws
611.8E23.363.813
Chipboard screws
611.8K16.240.016
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
13
7.5
12
7.5 4
12
4
1.100
Right Screw-on 603.8C46.005
Left Screw-on 603.8C46.006
Right Machine insertion 603.8C46.010
Left Machine insertion 603.8C46.012
Right Expanding dowel 603.8C46.015
Left Expanding dowel 603.8C46.016
Accessories
Side Mounting Item number
Front Clips
Screw-on
Front Clips
Machine insertion 10mm
Expanding dowel 10mm
• Front clips must be ordered separately
• Choose clip based on your preferred
mounting method
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.101
Tekform Single Wall Drawer
250 603.8C98 > 025.K
270 603.8C98 > 027.K
350 603.8C98 > 035.K
400 603.8C98 > 040.K
450 603.8C98 > 045.K
500 603.8C98 > 050.K
550 603.8C98 > 055.K
250 603.8C98 > 125.K
270 603.8C98 > 127.K
350 603.8C98 > 135.K
400 603.8C98 > 140.K
450 603.8C98 > 145.K
500 603.8C98 > 150.K
550 603.8C98 > 155.K
603.8C98 > 200
Accessories
Length (mm)
Item number
White
Round Railings
• Improved storage in high drawers
• Easy one-step fixing and screw-on front
attachment
• Lasting quality
EasyFix Railing
EasyFix
Screw-on
Back Bracket (wood)
#$%&'()*+,'-)+-).. !\"\"
L
T
T
L
T
Ø10
min. 11
8)\"5/)(9/:0; < -
!21 !21 !!\"32
!\"1) !\"1) !4\"32)
521) 521) 5!\"32)
411) 411) 5\"\"32
421) 421) 4!\"32
211) 211) 4\"\"32)
221) 221) 2!\"32
8)\"5/)(9/:0; < -
!21 !64 !57
!\"1) !74) !27)
521) 564) 557
411) 404) 577
421) 464) 457
211) 204) 477)
221) 264) 257)
=\"2&+/0(
5&90; =\"2&+/0(:\"+/*(
0;&4>+/## -
511 02806807 !55
411 02806807 555
421 02806807 575
211 02806807 455
611 02806807 255
\"11 02806807 655
711 02806807 \"55
911 02806807 755
#$%&'()*+,'-)+-).. !\"\"
L
T
T
L
T
Ø10
min. 11
8)\"5/)(9/:0; < -
!21 !21 !!\"32
!\"1) !\"1) !4\"32)
521) 521) 5!\"32)
411) 411) 5\"\"32
421) 421) 4!\"32
211) 211) 4\"\"32)
221) 221) 2!\"32
8)\"5/)(9/:0; < -
!21 !64 !57
!\"1) !74) !27)
521) 564) 557
411) 404) 577
421) 464) 457
211) 204) 477)
221) 264) 257)
=\"2&+/0(
5&90; =\"2&+/0(:\"+/*(
0;&4>+/## -
511 02806807 !55
411 02806807 555
421 02806807 575
211 02806807 455
611 02806807 255
\"11 02806807 655
711 02806807 \"55
911 02806807 755
#$%&'()*+,'-)+-).. !\"\"
L
T
T
L
T
Ø10
min. 11
8)\"5/)(9/:0; < -
!21 !21 !!\"32
!\"1) !\"1) !4\"32)
521) 521) 5!\"32)
411) 411) 5\"\"32
421) 421) 4!\"32
211) 211) 4\"\"32)
221) 221) 2!\"32
8)\"5/)(9/:0; < -
!21 !64 !57
!\"1) !74) !27)
521) 564) 557
411) 404) 577
421) 464) 457
211) 204) 477)
221) 264) 257)
=\"2&+/0(
5&90; =\"2&+/0(:\"+/*(
0;&4>+/## -
511 02806807 !55
411 02806807 555
421 02806807 575
211 02806807 455
611 02806807 255
\"11 02806807 655
711 02806807 \"55
911 02806807 755
Screw-on Railing
!\"\"
!\"#$%&'$()\"#*+)%*&#,
+
- + - 3
4
4
2
1 A
B
64
10
c 64 c
180 148
26
H=85
H=117
±2° 4 2
4
3
1
!\"#$%&'()*)$+&,\"'&8\"\"%.$&0(12&3($.*&4&(55.-0*6&5.7#.$1.
a= 64 min. 64
10
37.5 a 32
32
H=85
8.5
4.5
7.5
32
d= 96 min.
d-32
64
42
37.5
32
64 32
H=150
b= 64 min. 64
26
37.5 64 b-16
32
H=117
Tubes positioning
Drawer C
SW85 32 - 48 - 64
SW117 48 - 64 - 80
Assembly Instructions
Round Railing for
Wooden Back Panel
Assembly Sequence
1.102
350 35 Standard Side 603.8B20.027 > 342
350 35 Soft Close Side 603.8B20.035 > 450
400 35 Soft Close Side 603.8B20.040 > 450
450 35 Soft Close Side 603.8B20.045 > 450
500 35 Soft Close Side 603.8B20.050 > 450
550 35 Soft Close Side 603.8B20.055 > 450
600 35 Soft Close Side 603.8B20.060 > 450
• Integrated soft close Length (mm) Weight capacity (kg) Closing
Mounting
Item number
Zinc plated
Ball Bearing Drawer Runners, Full Extension
Ball Bearing Drawer Runners, Full Extension
with Soft Close
Drawer Runners
Ball Bearing Drawer Runners
Made of steel
Made of steel
• Full extension
• Ball bearing
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.103
Drawer Runners
250 45 Standard Side 603.8B20.025 > 454
300 45 Standard Side 603.8B21.030 > 454
350 45 Standard Side 603.8B21.035 > 454
400 45 Standard Side 603.8B21.040 > 454
450 45 Standard Side 603.8B21.045 > 454
500 45 Standard Side 603.8B21.050 > 454
550 45 Standard Side 603.8B21.055 > 454
600 45 Standard Side 603.8B21.060 > 454
250 45 Standard Side 603.8B20.025 > 450
300 45 Standard Side 603.8B21.030 > 450
350 45 Standard Side 603.8B21.035 > 450
400 45 Standard Side 603.8B21.040 > 450
450 45 Standard Side 603.8B21.045 > 450
500 45 Standard Side 603.8B21.050 > 450
550 45 Standard Side 603.8B21.055 > 450
600 45 Standard Side 603.8B21.060 > 450
650 45 Standard Side 603.8B21.065 > 450
700 45 Standard Side 603.8B21.070 > 450 Length (mm) Weight capacity (kg) Closing Mounting
Item number
Black
Zinc plated
Ball Bearing Drawer Runners, Full Extension
Drawer Runners
Ball Bearing Drawer Runners
Made of steel
• Full extension
• Ball bearing
1.104
Tekform Bottom Mounted
Roller Runners
Length (mm)
Weight capacity (kg)
Item number
White
250 25 603.8C05.025 > 001
300 25 603.8C05.030 > 001
350 25 603.8C05.035 > 001
400 25 603.8C05.040 > 001
450 25 603.8C05.045 > 001
500 25 603.8C05.050 > 001
550 25 603.8C05.055 > 001
600 25 603.8C05.060 > 001
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.105
Drawer Runners
Standard position for the dowels
Drawer mounting and dimensions
Slides fixing dimensions
• 25kg dynamic standard capacity
• Easy assembly
• Add-on SlowMotion damping available
• Standard closing
L= Nominal Length AV= Extension Loss
L 270 300 350 400 450 500 550 600
AV 90 90 90 100 100 100 118 118
1.106
Tekform Drawers
Bill of Materials - DWD
DWD113
with Square Side
Bar
Length Drawer set Bracket Square side bar
270mm 650.8027.150 650.8911.150 650.8727.150
350mm 650.8035.150 650.8911.150 650.8735.150
400mm 650.8040.150 650.8911.150 650.8740.150
450mm 650.8045.150 650.8911.150 650.8745.150
500mm 650.8050.150 650.8911.150 650.8750.150
550mm 650.8055.150 650.8911.150 650.8755.150
DWD145
with 4mm Glass
Sides
Length Glass finish Drawer set Glass sides Rear connector Glass clips Square side bar
400mm Frosted Glass 650.8140.150K 650.8404.391 650.8484.350 650.8902.150 650.8740.150
450mm Frosted Glass 650.8145.150K 650.8405.391 650.8484.350 650.8902.150 650.8745.150
500mm Frosted Glass 650.8150.150K 650.8406.391 650.8484.350 650.8902.150 650.8750.150
550mm Frosted Glass 650.8155.150K 650.8407.391 650.8484.350 650.8902.150 650.8755.150
DWD182
with 4mm Glass
Sides
Length Glass finish Drawer set Glass sides Rear connector Glass clips Square side bar
400mm Frosted Glass 650.8240.150K 650.8440.391 650.8485.350 650.8903.150 650.8740.150
450mm Frosted Glass 650.8245.150K 650.8445.391 650.8485.350 650.8903.150 650.8745.150
500mm Frosted Glass 650.8250.150K 650.8450.391 650.8485.350 650.8903.150 650.8750.150
550mm Frosted Glass 650.8255.150K 650.8455.391 650.8485.350 650.8903.150 650.8755.150
DWD145
with 8mm Glass
Sides
Length Glass finish Drawer set Glass sides Rear connector Glass clips
400mm Frosted Glass 650.8140.150K 650.8463.391 650.8488.350 650.8902.150
450mm Frosted Glass 650.8145.150K 650.8464.391 650.8488.350 650.8902.150
500mm Frosted Glass 650.8150.150K 650.8465.391 650.8488.350 650.8902.150
550mm Frosted Glass 650.8155.150K 650.8466.391 650.8488.350 650.8902.150
DWD182
with 8mm Glass
Sides
Length Glass finish Drawer set Glass sides Rear connector Glass clips
400mm Frosted Glass 650.8240.150K 650.8470.391 650.8489.350 650.8903.150
450mm Frosted Glass 650.8245.150K 650.8471.391 650.8489.350 650.8903.150
500mm Frosted Glass 650.8250.150K 650.8472.391 650.8489.350 650.8903.150
550mm Frosted Glass 650.8255.150K 650.8473.391 650.8489.350 650.8903.150
DWD Inner
Drawer Fronts Length Drawer set
DW70
Drawer set
DW145
Drawer set
DW182
Square Front Bar
(DW145 / DW182) Front panel Front bracket
270mm 650.8027.150 650.8127.150K 650.8227.150K 650.8604.150 650.8569.150 DW70 (all lengths):
650.8912.350 350mm 650.8035.150 650.8135.150K 650.8235.150K 650.8604.150 650.8569.150
400mm 650.8040.150 650.8140.150K 650.8240.150K 650.8604.150 650.8569.150 DW145 (all lengths):
650.8914.350 450mm 650.8045.150 650.8145.150K 650.8245.150K 650.8604.150 650.8569.150
500mm 650.8050.150 650.8150.150K 650.8250.150K 650.8604.150 650.8569.150 DW182 (all lengths):
650.8916.350 550mm 650.8055.150 650.8155.150K 650.8255.150K 650.8604.150 650.8569.150
*with EasyFix front connectors and 1200mm panel width and square bar
Front panel support clip
002110.885.300 white
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.107
BOM Codes
Tekform Drawers
Bill of Materials - Slimline DWD Inner Fronts
Slimline SDWD70
with Aluminium
Front
Length Drawer finish Drawer set Front panel Front bracket
270mm White 655.8T27.150.00 655.8189.511.00 655.8065.150.00
350mm White 655.8T35.150.00 655.8189.511.00 655.8065.150.00
400mm White 655.8T40.150.00 655.8189.511.00 655.8065.150.00
450mm White 655.8T45.150.00 655.8189.511.00 655.8065.150.00
500mm White 655.8T50.150.00 655.8189.511.00 655.8065.150.00
550mm White 655.8T55.150.00 655.8189.511.00 655.8065.150.00
270mm Anthracite 655.8T27.150.00 655.8189.515.00 655.8065.185.00
350mm Anthracite 655.8T35.150.00 655.8189.515.00 655.8065.185.00
400mm Anthracite 655.8T40.150.00 655.8189.515.00 655.8065.185.00
450mm Anthracite 655.8T45.150.00 655.8189.515.00 655.8065.185.00
500mm Anthracite 655.8T50.150.00 655.8189.515.00 655.8065.185.00
550mm Anthracite 655.8T55.150.00 655.8189.515.00 655.8065.185.00
Slimline SDWD70
with Glass Front
Length Drawer finish Glass finish Drawer set Front panel Glass panel Front bracket
270mm White Transparent 655.8T27.150.00 655.8209.511.00 655.8295.391.00 655.8305.350.00
350mm White Transparent 655.8T35.150.00 655.8209.511.00 655.8295.391.00 655.8305.350.00
400mm White Transparent 655.8T40.150.00 655.8209.511.00 655.8295.391.00 655.8305.350.00
450mm White Transparent 655.8T45.150.00 655.8209.511.00 655.8295.391.00 655.8305.350.00
500mm White Transparent 655.8T50.150.00 655.8209.511.00 655.8295.391.00 655.8305.350.00
550mm White Transparent 655.8T55.150.00 655.8209.511.00 655.8295.391.00 655.8305.350.00
270mm Anthracite Transparent 655.8T27.150.00 655.8209.515.00 655.8295.391.00 655.8305.385.00
350mm Anthracite Transparent 655.8T35.150.00 655.8209.515.00 655.8295.391.00 655.8305.385.00
400mm Anthracite Transparent 655.8T40.150.00 655.8209.515.00 655.8295.391.00 655.8305.385.00
450mm Anthracite Transparent 655.8T45.150.00 655.8209.515.00 655.8295.391.00 655.8305.385.00
500mm Anthracite Transparent 655.8T50.150.00 655.8209.515.00 655.8295.391.00 655.8305.385.00
550mm Anthracite Transparent 655.8T55.150.00 655.8209.515.00 655.8295.391.00 655.8305.385.00
*with EasyFix front connectors and 1200mm panel width
Front panel support clip
002110.885.300 white
1.108
Tekform Drawers
Bill of Materials - Slimline DWD Inner Fronts
Slimline SDWD145
with Aluminium Front and
Square Bar
Length Drawer finish Drawer set Front panel Front bar Front bracket
270mm White 655.8V27.150.00 655.8189.511.00 655.8214.511.00 655.8101.150.00
350mm White 655.8V35.150.00 655.8189.511.00 655.8214.511.00 655.8101.150.00
400mm White 655.8V40.150.00 655.8189.511.00 655.8214.511.00 655.8101.150.00
450mm White 655.8V45.150.00 655.8189.511.00 655.8214.511.00 655.8101.150.00
500mm White 655.8V50.150.00 655.8189.511.00 655.8214.511.00 655.8101.150.00
550mm White 655.8V55.150.00 655.8189.511.00 655.8214.511.00 655.8101.150.00
270mm Anthracite 655.8V27.150.00 655.8189.515.00 655.8214.515.00 655.8101.185.00
350mm Anthracite 655.8V35.150.00 655.8189.515.00 655.8214.515.00 655.8101.185.00
400mm Anthracite 655.8V40.150.00 655.8189.515.00 655.8214.515.00 655.8101.185.00
450mm Anthracite 655.8V45.150.00 655.8189.515.00 655.8214.515.00 655.8101.185.00
500mm Anthracite 655.8V50.150.00 655.8189.515.00 655.8214.515.00 655.8101.185.00
550mm Anthracite 655.8V55.150.00 655.8189.515.00 655.8214.515.00 655.8101.185.00
Slimline SDWD145
with Glass Front
Length Drawer finish Glass finish Drawer set Front panel Glass panel Front bracket
270mm White Transparent 655.8V27.150.00 655.8209.511.00 655.8224.391.00 655.8103.350.00
350mm White Transparent 655.8V35.150.00 655.8209.511.00 655.8224.391.00 655.8103.350.00
400mm White Transparent 655.8V40.150.00 655.8209.511.00 655.8224.391.00 655.8103.350.00
450mm White Transparent 655.8V45.150.00 655.8209.511.00 655.8224.391.00 655.8103.350.00
500mm White Transparent 655.8V50.150.00 655.8209.511.00 655.8224.391.00 655.8103.350.00
550mm White Transparent 655.8V55.150.00 655.8209.511.00 655.8224.391.00 655.8103.350.00
270mm Anthracite Transparent 655.8V27.150.00 655.8209.515.00 655.8224.391.00 655.8103.385.00
350mm Anthracite Transparent 655.8V35.150.00 655.8209.515.00 655.8224.391.00 655.8103.385.00
400mm Anthracite Transparent 655.8V40.150.00 655.8209.515.00 655.8224.391.00 655.8103.385.00
450mm Anthracite Transparent 655.8V45.150.00 655.8209.515.00 655.8224.391.00 655.8103.385.00
500mm Anthracite Transparent 655.8V50.150.00 655.8209.515.00 655.8224.391.00 655.8103.385.00
550mm Anthracite Transparent 655.8V55.150.00 655.8209.515.00 655.8224.391.00 655.8103.385.00
*with EasyFix front connectors and 1200mm width
Front panel support clip
002110.885.300 white
Download supporting documentation from the Titus Tekform website titustekform.com.au 1.109
BOM Codes
Tekform Drawers
Bill of Materials - Slimline DWD Inner Fronts
Slimline SDWD182
with Aluminium Front and
Square Bar
Length Drawer finish Drawer set Front panel Front bar Front bracket
270mm White 655.8Z27.150.00 655.8189.511.00 655.8214.511.00 655.8170.150.00
350mm White 655.8Z35.150.00 655.8189.511.00 655.8214.511.00 655.8170.150.00
400mm White 655.8Z40.150.00 655.8189.511.00 655.8214.511.00 655.8170.150.00
450mm White 655.8Z45.150.00 655.8189.511.00 655.8214.511.00 655.8170.150.00
500mm White 655.8Z50.150.00 655.8189.511.00 655.8214.511.00 655.8170.150.00
550mm White 655.8Z55.150.00 655.8189.511.00 655.8214.511.00 655.8170.150.00
270mm Anthracite 655.8Z27.150.00 655.8189.515.00 655.8214.515.00 655.8170.185.00
350mm Anthracite 655.8Z35.150.00 655.8189.515.00 655.8214.515.00 655.8170.185.00
400mm Anthracite 655.8Z40.150.00 655.8189.515.00 655.8214.515.00 655.8170.185.00
450mm Anthracite 655.8Z45.150.00 655.8189.515.00 655.8214.515.00 655.8170.185.00
500mm Anthracite 655.8Z50.150.00 655.8189.515.00 655.8214.515.00 655.8170.185.00
550mm Anthracite 655.8Z55.150.00 655.8189.515.00 655.8214.515.00 655.8170.185.00
Slimline SDWD182
with Glass Front
Length Drawer finish Glass finish Drawer set Front panel Glass panel Front bracket
270mm White Transparent 655.8Z27.150.00 655.8209.511.00 655.8284.391.00 655.8172.350.00
350mm White Transparent 655.8Z35.150.00 655.8209.511.00 655.8284.391.00 655.8172.350.00
400mm White Transparent 655.8Z40.150.00 655.8209.511.00 655.8284.391.00 655.8172.350.00
450mm White Transparent 655.8Z45.150.00 655.8209.511.00 655.8284.391.00 655.8172.350.00
500mm White Transparent 655.8Z50.150.00 655.8209.511.00 655.8284.391.00 655.8172.350.00
550mm White Transparent 655.8Z55.150.00 655.8209.511.00 655.8284.391.00 655.8172.350.00
270mm Anthracite Transparent 655.8Z27.150.00 655.8209.515.00 655.8284.391.00 655.8172.385.00
350mm Anthracite Transparent 655.8Z35.150.00 655.8209.515.00 655.8284.391.00 655.8172.385.00
400mm Anthracite Transparent 655.8Z40.150.00 655.8209.515.00 655.8284.391.00 655.8172.385.00
450mm Anthracite Transparent 655.8Z45.150.00 655.8209.515.00 655.8284.391.00 655.8172.385.00
500mm Anthracite Transparent 655.8Z50.150.00 655.8209.515.00 655.8284.391.00 655.8172.385.00
550mm Anthracite Transparent 655.8Z55.150.00 655.8209.515.00 655.8284.391.00 655.8172.385.00
*with EasyFix front connectors and 1200mm width
Front panel support clip
002110.885.300 white
0.1
0.2
TeraBlack
Concealed Hinges
Products
2.2
TeraBlack
Product Guide
T-type hinges
Page
T-type Glissando 110 0mm 110° For wooden doors 2.12
9mm 110° For wooden doors 2.14
17mm 110° For wooden doors 2.14
T-type Glissando 110/45° 45°, 17mm 110° For wooden doors 2.16
T-type Glissando 110/90° 90°, 17mm 110° For wooden doors 2.18
T-type 170 0mm 170° For wooden doors 2.20
T-type Pie-cut Corner Cabinet 110° For wooden doors 2.22
T-type Mounting Plates 2.24
Cover Caps 2.26
Cabinet accessories
Glissando TL 170 2.28
Push Latch 2.30
Joining Plates 2.32
Shelf Support 2.33
2.3
2.4
Engineered for purpose
Uniform surface that absorbs light and reduces
reflection, combining black matte colour together
with a special anti-corrosion protection.
2.5
Concealed Hinges
TeraBlack is more than just another colour option.
The Titus Enhanced Resistance Application finish is uniquely
durable, designed to last and backed by the Titus lifetime
hardware warranty.
It is an engineered solution supported by a highly controllable,
repeatable and efficient manufacturing process allowing for
consistency throughout the lifecycle of the product.
Engineered for purpose
TeraBlack products have a light-absorbing microstructure
which provides a smooth, uniform surface and a velvet feel. The
unique black non-reflective matte finish creates an unobtrusive
effect for a subtle style upgrade.
The TeraBlack finish provides exceptional corrosion resistance
and consistency throughout the lifecycle of the product.
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.6
Absolute versatility
2.7
Concealed Hinges
Absolute versatility
Take the design and performance of your furniture
to the next level with the Titus TeraBlack product range.
TeraBlack, with its highly uniform non-reflective black matte
surface, complements all - modern and classic - furniture designs
in kitchens, bedrooms, living rooms, bathrooms and office
applications.
Titus launched the TeraBlack product range, spearheaded by the
hugely popular T-type hinge family, to work equally well against
black, anthracite, and traditional cabinetry and hardware. A whole
range of fittings are now available in the TeraBlack finish, including
push latches, shelf supports, joining plates, connectors and more.
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.8
Concealed Hinges
Drilling Patterns
Drilling Patterns for Hinge Cup
Interaxis
45mm
· T-type
Interaxis is the distance between the centre of the two
holes for fixing screws on the hinge cup.
Hinge
cup type
Interaxis
45mm
Drilling
pattern
Screw-on
ready
Pre-mounted
Ø4.5mm
screws
Machine
insertion
ready
Pre-mounted
expando
dowels
Easy-fix
system
Pre-mounted
euro screws
45
9.5
Ø 35
45 35
8
9.5
45 35
5
9.5
45 35
9.5
2.9
TeraBlack Hinges
Concealed Hinges
Adjustment
Side Adjustment
By rotating
the adjustment screw
T-type
The side adjustment aligns the door
with the side of the cabinet.
The side adjustment is made
by rotating the screw on the hinge arm.
Adjustment range
+3/-1mm
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.10
-2 +2 +2 -2 -2 +2 +2 -2 -2 +2 +2 -2 -2 +2 +2 -2
Concealed Hinges
Adjustment
Height Adjustment
By rotating the
cam adjuster
T-type with cam adjustable
cruciform mounting plate
T-type with cam adjustable
horizontal mounting plate
Height adjustment is necessary
to achieve optimal vertical door position.
Height adjustment is made
by rotating the cam adjuster
on the mounting plate.
2.11
TeraBlack Hinges
Adjustment range
+4/-1mm -2 +2 -2 +2
Depth Adjustment
By rotating the cam adjuster
T-type
The system enables easy adjustment of the
gap between door and cabinet.
Rotate the cam adjuster on the hinge arm.
T-type Glissando 110 The damping action can be adjusted to
fit different door weights and sizes which
enables perfect door soft closing.
Damping is factory pre-set to the
medium damping value.
Turn towards ‘+’ to increase and
‘-’ to decrease the damping.
Damping Adjustment
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.12
TeraBlack
T-type Glissando 110
For wooden doors
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 12mm
· Hinge on plate mounting system 3Way snap-on
Interaxis
45mm
Technical details Cup type Item number
Cranking 701.0AT0.956.00
0mm 701.0AT4.956.00
Drilling patterns for hinge cups > see page 2.8
96 pcs Made of steel
Cam adjustable cruciform
mounting plate
> see page 2.24
Cam adjustable horizontal
mounting plate
> see page 2.24
Hinge cup screws
If not pre-mounted
Mounting plates Legend of hinge cup symbols
Screw-on
ready
> screws
EasyFix
system
820.6328.956.00
Hinge angle restrictor
728.4669.383.00
200 Pcs
4
16
7.5
K 42.5
11.711.4
26.1
65.4
45
9.5
Ø 35
For cranking
0mm
For cranking
0mm, 5mm,
9mm, 17mm
Cover caps for hinge arm
> see page 2.26
1000 pcs
2.13
TeraBlack Hinges
18.5 S
10.6 V
K
D
F>Fmin
Z 37
67.5
X
x 13 14 15 16 17 18 19
K
3 3 2 1 0
4 4 3 2 1 0
5 4 3 2 1 0
6 4 3 2 1 0 D
D=13+K-x
37
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+4/-1mm
For further explanation > see pages 2.9 - 2.10
Door adjustment
For further explanation > see page 2.10
Damping adjustment
Mounting
details Mounting plate thickness table
Drawing shows application on
D=0mm thick mounting plate
Mounting plate
drilling distance
Door clearance at R=1mm
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
Push Latch
> see page 2.30
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.14
TeraBlack
T-type Glissando 110
For wooden doors
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 12mm
· Hinge on plate mounting system 3Way snap-on
Interaxis
45mm
Technical details Cup type Item number
Cranking 701.0CT0.956.00
9mm 701.0CT4.956.00
Drilling patterns for hinge cups > see page 2.8
96 pcs Made of steel
Cranking 701.0DT0.956.00
17mm 701.0DT4.956.00
Drilling patterns for hinge cups > see page 2.8
96 pcs Made of steel
Cam adjustable cruciform
mounting plate
> see page 2.24
Cam adjustable horizontal
mounting plate
> see page 2.24
Hinge cup screws
If not pre-mounted
Mounting plates Legend of hinge cup symbols
Screw-on
ready
> screws
EasyFix
system
For cranking
0mm, 5mm,
9mm, 17mm
820.6328.956.00
Hinge angle restrictor
728.4669.383.00
200 Pcs
Cover caps for hinge arm
> see page 2.26
4
16
7.5
K 42.5
11.711.4
26.1
65.4
K 42.5
11.711.4
26.1
65.4
45
9.5
Ø 35
1000 pcs
2.15
TeraBlack Hinges
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+4/-1mm
For further explanation > see pages 2.9 - 2.10
Door adjustment
For further explanation > see page 2.9
Damping adjustment
Mounting
details Mounting plate thickness table
Drawing shows application on
D=0mm thick mounting plate
Mounting plate
drilling distance
Door clearance at R=1mm
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
Push Latch
> see page 2.30
37
x 4 5 6 7 8 9 10
K
3 3 2 1 0
4 4 3 2 1 0
5 4 3 2 1 0
6 4 3 2 1 0 D
D=4+K-x
V
K
S27.5
19.6
D
67.5
37
Z X
F>2Fmin
V
K
S27.5
19.6
D
67.5
37
Z X
F>2Fmin
37+V
V 16 17 18 19 20 21 22 23 24
K
3 0 0 0 0 1 1 1 1 2
4 1 1 1 1 2 2 2 2 3
5 2 2 2 2 3 3 3 3 4
6 3 3 3 3 4 4 4 4 D
D= -4+K+F
Drawing show application on
D=2mm thick mounting plate V
K 37.5 S
29.6
D
68.6
37
F>Fmin
V
K 37.5 S
29.6
D
68.6
37
F>Fmin
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.16
TeraBlack
T-type Glissando 110/45°
45° angled application for wooden doors
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 12mm
· Hinge on plate mounting system 3Way snap-on
Interaxis
45mm
Technical details Cup type Item number
Cranking 701.0B08.961.00
17mm 701.0C54.961.00
Drilling patterns for hinge cups > see page 2.8
48 pcs Cup made of steel, arm made of zinc
Cam adjustable cruciform
mounting plate
> see page 2.24
Cam adjustable horizontal
mounting plate
> see page 2.24
Hinge cup screws
If not pre-mounted
Mounting plates Legend of hinge cup symbols
Screw-on
ready
> screws
EasyFix
system
820.6328.956.00
Hinge angle restrictor
728.4669.383.00
200 Pcs
4
16
7.5
45
9.5
Ø 35
K 42.5
11.7 11.4
26.1
65.4
For cranking
0mm, 5mm,
9mm, 17mm
Cover caps for hinge arm
> see page 2.26
1000 pcs
2.17
TeraBlack Hinges
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+2.5/-2.5mm
For further explanation > see pages 2.9 - 2.10
Door adjustment
For further explanation > see page 2.9
Damping adjustment
Mounting
details Mounting plate thickness table
Mounting plate
drilling distance
Door clearance at R=1mm
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
Push Latch
> see page 2.30
L
37
31.7
12.5
67.6 75.6
L
P
45°
K
D S
V
V
12.5
31.7 S
P
D
K
x
45°
X 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 6
K
3 2 1 0
4 2 1 0
5 3 2 1 0
6 4 3 2 1 0 D
P 0 0.5 1 1.5 2 2.5 3 3.5 4
K
3 2 1 0
4 3 2 1 0
5 3 2 1 0
6 4 3 2 1 0 D
Drawings show application on
D=0mm mounting plate
L=45 for thickness D=0
L=44 for thickness D=1
L=43 for thickness D=2
L=42 for thickness D=3
L=41 for thickness D=4
Drawings show application on
D=0mm mounting plate
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.18
TeraBlack
T-type Glissando 110/90°
For wooden door cabinets with blind panels
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 12mm
· Hinge on plate mounting system 3Way snap-on
Interaxis
45mm
Technical details Cup type Item number
Cranking 701.0A96.961.00
17mm 701.0D30.961.00
Drilling patterns for hinge cups > see page 2.8
48 pcs Cup made of steel, arm made of zinc
Cam adjustable cruciform
mounting plate
> see page 2.24
Cam adjustable horizontal
mounting plate
> see page 2.24
Hinge cup screws
If not pre-mounted
Mounting plates Legend of hinge cup symbols
Screw-on
ready
> screws
EasyFix
system
820.6328.956.00
Hinge angle restrictor
728.4669.383.00
200 Pcs
4
16
7.5
45
9.5
Ø 35
For cranking
0mm, 5mm,
9mm, 17mm
Cover caps for hinge arm
> see page 2.26
K 42.5
11.7 11.4
26.1
65.4
1000 pcs
2.19
TeraBlack Hinges
Side
adjustment
+2.5/-2.5mm
Height
adjustment
+2/-2mm
Depth
adjustment
+3/-1mm
For further explanation > see pages 2.9 - 2.10
Door adjustment
For further explanation > see page 2.9
Damping adjustment
Mounting
details Mounting plate drilling distance
Door clearance at R=1mm
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
Push Latch
> see page 2.30
21.5
52
V
21
F K
Drawing shows application on
D=2mm mounting plate
Drawing shows application on
D=2mm mounting plate
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.20
TeraBlack
T-type 170
For wooden doors
170°
· Opening angle 165˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 12mm
· Hinge on plate mounting system 3Way snap-on
Interaxis
45mm
Technical details Cup type Item number
Cranking 702.0EK0.956.00
0mm 702.0EK4.956.00
Drilling patterns for hinge cups > see page 2.8
48 pcs Made of steel and zinc
Cam adjustable cruciform
mounting plate
> see page 2.24
Cam adjustable horizontal
mounting plate
> see page 2.24
Hinge cup screws
If not pre-mounted
Mounting plates Legend of hinge cup symbols
Screw-on
ready
> screws
EasyFix
system
820.6328.956.00
Hinge angle restrictor
248.4672.383.00
200 Pcs
4
16
7.5
45
9.5
Ø 35
1000 pcs
2.21
TeraBlack Hinges
37
x 13 14 15 16 17 18 19
K
3 3 2 1 0
4 4 3 2 1 0
5 4 3 2 1 0
6 4 3 2 1 0 D
D=13+K-x
37
C
52
D
7
37
67
F>Fmin
S
K
V
-1.4
90°
Drawings show application on
D=0mm mounting plate
No protrusion in 90° position
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+4/-1mm
For further explanation > see pages 2.9 - 2.10
Door adjustment
Mounting
details Mounting plate thickness table
Mounting plate
drilling distance
Door clearance at R=1mm
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
Push Latch
> see page 2.30
Glissando TL 170
> see page 2.28
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.22
TeraBlack
T-type for Pie-cut
Corner Cabinet
For wooden doors
· Opening angle 70˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11mm
· Hinge on plate mounting system 3Way snap-on
Interaxis
45mm
Technical details Cup type Item number
Corner
Cabinet 721.0PK0.961.00
721.0PK4.961.00
Drilling patterns for hinge cups > see page 2.8
48 pcs Made of steel and zinc
Cam adjustable cruciform
mounting plate
> see page 2.24
Cam adjustable horizontal
mounting plate
> see page 2.24
Hinge cup screws
If not pre-mounted
Mounting plates Legend of hinge cup symbols
Screw-on
ready
> screws
EasyFix
system
4 820.6328.956.00
16
7.5
45
9.5
Ø 35
For cranking
0mm
For cranking
0mm, 5mm,
9mm, 17mm
Cover caps for hinge arm
> see page 2.26
1000 pcs
2.23
TeraBlack Hinges
V = 16 - 22 mm
K = 3 - 5 mm K
32
35
37
D=3
+3
-1
v
11.5
+6
-2 +5
-1.5
19
19
D=2
-6
+6
-1
+3
+2.5 -2.5
70°
V=16-25mm
K=3-6
25°
V
Side
adjustment
+2.5/-2.5mm
Height
adjustment
+2/-2mm
Depth
adjustment
+3/-1mm
For further explanation > see pages 2.9 - 2.10
Door adjustment
Mounting
details Adjustment
Mounting plate
drilling distance
Any T-type mounting plate
can be used
The adjustment of the gap between two
doors is done by rotating the adjustment
screw as shown on the drawing
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.24
TeraBlack
T-type Mounting Plates
3Way snap-on mounting
Drilling pattern Dimensions
Cam adjustable
cruciform mounting
plate 37mm
384 pcs Made of steel
Cam adjustable
horizontal mounting
plate 37mm
768 pcs Made of steel
53
57.2
37
32
19.9
65.2
20 32
2.25
TeraBlack Hinges
D
Mounting plate thickness Height adjustment +2/-2mm Height adjustment +2/-2mm
Legend of mounting plate type symbols
Pre-mounted
15mm euro screws
Pre-mounted
10.5mm expanding
dowels
15 10.5
Item number Item number
0mm 700.0KC0.956.00 700.0KF0.956.00
2mm 700.0KC2.956.00 700.0KF2.956.00
3mm 700.0KC3.956.00 700.0KF3.956.00
2mm 700.0LC2.961.00 700.0LF2.961.00 Mounting plate type Mounting plate thickness (D)
Ø5
min
11.5
15
Ø5
min
10.5
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.26
TeraBlack
T-type Cover Caps
For hinge arms
Interaxis
45mm
Technical details Plate type Item number
T-type hinge arm
cover cap for 0mm
cranking
Neutral 728.1283.956.00
Titus 728.1286.956.00
For T-type 110
Made of steel
T-type hinge arm
cover cap for 0mm,
5mm, 9mm, 17mm
cranking
Neutral 728.1284.956.00
Titus 728.1287.956.00
For T-type 110
Made of steel
36.5
12
34.1
10.6
2.27
TeraBlack Hinges
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.28
TeraBlack
Glissando TL 170
Add-on Hinge Soft Closing
System for T-type 170
170°
Technical details
Hinge opening angle
Item number
Glissando TL 170
snap-on
170° 951.0F15.961.00
Soft closing mechanism
Striking plate
240 pcs Made of steel and plastic
41
88.5 24
52.5
12.4
K
2.29
TeraBlack Hardware
Turn towards ‘+’ to increase and
‘-’ to decrease the damping
Damping adjustment
1 1-2 2 2
2
3
4
5
Glissando
No additional drilling is required
Recommended number per
door and positioning
No. of hinges
No. of
Glissandos
Mounting
details
· Gentle and reliable soft closing on doors with wider
opening angle
· Fits perfectly 45/9.5mm and 48/6mm hinge cups
· Furniture consumers’ preferred
ConfidentClose damping action
· Toolless mounting
Toolless mounting
Insert Glissando TL 170 into the
holes on the hinge cup
Place the striking plate into the
hole on the hinge arm
Press down
Press down
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.30
TeraBlack
Push Latch
For wooden doors and drawers
Push Push
Technical details
Spring force [N] (released)
Spring force [N] (loaded)
Item number
Push Latch with Bumper 10 20 915.0X59.383.00
with Linear mounting plate 10 20 915.0X59.383.K2
Push latch
Linear mounting plate
400 pcs Made of steel and plastic
Fixing screws for mounting plate
4 820.6328.956.00
16
7.5
1000 pcs
2.31
TeraBlack Hardware
Door adjustment
Depth
adjustment
+4.5/-1mm
Mounting
details
· Effortless opening with just a light touch
· Depth adjustment ensures reliable closing and
consistent performance in case of inaccurate drilling
· ‘Safety click’ feature for easy detachment of the
mechanism from its mounting plate
Dimensions Depth adjustment
Positioning
37
32
Ø6.4 (3x)
20
2
43
2
43
Minimum
activation gap
required
Depth adjustment
-1/+4.5mm
11.2
Close to the ‘touch opening point’
on the side opposite to hinges
On the cabinet side; gap between
drawer and cabinet side 12mm min
On the drawer bottom; in
the middle of drawer
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.32
TeraBlack
Joining Plates
· Rigid and strong
· No pre-drilling
· Spacer pegs provide an even 2mm gap
· Sleek design
Technical details Item number
Joining plate 105mm 360.1222.956.00
1440 pcs Made of steel
Joining plate 43mm 360.1230.956.00
2320 pcs Made of steel
Fixing screws for mounting plates
4 820.6328.956.00
16
7.5
2 Ø4.5
3.5
3
20
43
3
2
85
105
30
Ø4.5
3.5
3
2
85
105
30
Ø4.5
3.5
2 Ø4.5
3.5
3
20
43
1000 pcs
2.33
TeraBlack Hardware
TeraBlack
Shelf Supports
Mounting procedure:
Technical details Item number
Shelf support with
Ø5mm pin 01916.956.300
2000 pcs Made of zinc 13.3
8
2.5
13.5
10
Ø 5
13.3
8
2.5
13.5
10
Ø 5 Ø 5
2.5
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.34
2.35
Hinges
Concealed Hinges
& Dampers
2.36
Concealed Hinges
Product Guide
T-type
Page
T-type Glissando 110 0mm 110° For wooden doors 2.58
9mm 110° For wooden doors 2.60
17mm 110° For wooden doors 2.60
T-type Glissando 110/45° 45°, 17mm 110° For wooden doors 2.62
T-type Glissando 110/90° 90°, 17mm 110° For wooden doors 2.64
T-type 110 0mm 110° For wooden doors 2.66
9mm 110° For wooden doors 2.68
17mm 110° For wooden doors 2.68
T-type 110/45° 45°, 17mm 110° For wooden doors 2.70
T-type 110/90° 90°, 17mm 110° For wooden doors 2.72
T-type 170 0mm 170° For wooden doors 2.74
9mm 170° For wooden doors 2.74
T-type Pie-cut Corner Cabinet 110° For wooden doors 2.76
T-type Mounting Plates 2.78
S-type
S-type Plus 110 0mm 110° For wooden doors 2.82
9mm 110° For wooden doors 2.82
S-type 110 0mm 110° For wooden doors 2.84
9mm 110° For wooden doors 2.84
15mm 110° For wooden doors 2.84
S-type 110/45º 45º, 18mm 110° For wooden doors 2.86
S-type 110/90º 90º, 18mm 110° For wooden doors 2.88
S-type 170º 0mm 165° For wooden doors 2.90
S-type Pie-cut Corner Cabinet For wooden doors 2.92
2.37
S-type Mounting Plates 2.94
B-type
B-type Ø35 Shallow Cup 0mm 108° For wooden doors 2.98
General Hinges
Butt Hinge 2.100
Other Hinges 2.101
Accessories
Push Latch 2.102
PushOpen Catches 2.104
Cover Caps 2.106
Soft Closing Systems
Mounting Compatibility Opening Angle Page
Information 2.107
Glissando TT Add-on T-type 110° 2.118
Glissando TL Add-on S-type, B-type 110° 2.120
Glissando TL 170 Add-on T-type, S-type, B-type 170° 2.122
Glissando CR Stand alone T-type, S-type, B-type 110°, 120°, 170° 2.124
Titusoft WD Stand alone For wooden drawers 2.126
Titusoft MD Stand alone For metal drawers 2.128
2.38
A Comprehensive Range
Opening
angle
Door
thickness Crankings Door tab
K
Mounting
mode
Mounting
plate type
Mounting
plate height
Soft closing
options
Durability
(cycles) Page
T-type hinge
Titus New Generation hinge for quick
furniture assembly and consistent
performance on a wide range of
doors
'3Way' snap-on mounting
Highly tolerant
Adjustable damping
'ConfidentClose'
Numerous application possibilities
· For simpler cabinet design
· For demanding high quality furniture of
larger heights and weights
110°
170°
15-26mm 0mm
9mm
17mm
angled
3-6mm '3Way'
snap-on
Cruciform
Linear
0mm
1mm
2mm
3mm
Damping
integrated
in the hinge
cup
Glissando
add-on or
stand-alone
damping
solutions
100,000 2.58
S-type hinge
Simple and quick snap-on mounting
system
Easy assembly and disassembly
Adjustable damping
'ConfidentClose'
Push to open for handleless furniture
110°
170°
16-24mm 0mm
9mm
15mm
angled
3-5mm snap-on Cruciform 0mm
1mm
2mm
3mm
Damping
integrated
in the hinge
cup
Glissando
add-on or
stand-alone
damping
solutions
80,000 2.82
B-type hinge
Reliable slide-on mounting system
Simplicity in use
Reliable door closing
108° 12-24mm 0mm 3-6mm slide-on Cruciform 0mm
1mm
2mm
3mm
Glissando
add-on or
stand-alone
damping
solutions
80,000 2.98
2.39
Concealed Hinges
Opening
angle
Door
thickness Crankings Door tab
K
Mounting
mode
Mounting
plate type
Mounting
plate height
Soft closing
options
Durability
(cycles) Page
T-type hinge
Titus New Generation hinge for quick
furniture assembly and consistent
performance on a wide range of
doors
'3Way' snap-on mounting
Highly tolerant
Adjustable damping
'ConfidentClose'
Numerous application possibilities
· For simpler cabinet design
· For demanding high quality furniture of
larger heights and weights
110°
170°
15-26mm 0mm
9mm
17mm
angled
3-6mm '3Way'
snap-on
Cruciform
Linear
0mm
1mm
2mm
3mm
Damping
integrated
in the hinge
cup
Glissando
add-on or
stand-alone
damping
solutions
100,000 2.58
S-type hinge
Simple and quick snap-on mounting
system
Easy assembly and disassembly
Adjustable damping
'ConfidentClose'
Push to open for handleless furniture
110°
170°
16-24mm 0mm
9mm
15mm
angled
3-5mm snap-on Cruciform 0mm
1mm
2mm
3mm
Damping
integrated
in the hinge
cup
Glissando
add-on or
stand-alone
damping
solutions
80,000 2.82
B-type hinge
Reliable slide-on mounting system
Simplicity in use
Reliable door closing
108° 12-24mm 0mm 3-6mm slide-on Cruciform 0mm
1mm
2mm
3mm
Glissando
add-on or
stand-alone
damping
solutions
80,000 2.98
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.40
‘3Way’ snap-on
· Allows for intuitive hinge-to-plate
mounting in three directions
· Enhanced mounting experience
T-Type Hinges
Highly tolerant
· Reliable door closing in case of
accidental misalignment
· ‘ConfidentClose’ assured
Efficient performance in marginal values
of tolerances
Rigidity Low hinge cup drilling depth Proven Glissando concept
· Damper is positioned
transversal on the hinge cup
· Reliable performance
Enables application on door thicknesses
from 15mm on
‘Titus Damper Inside’
· Titus proprietary multi-purpose damping
technology
· Reliable and consistent
life-long damping
· No rebounce
Easy door installation even in
cases of 4-5 hinges per door · Hinge-to-plate attachment assures
stability and rigidity
· Smooth performance
‘3Way’ snap-on
· Allows for intuitive hinge-to-plate
mounting in three directions
· Enhanced mounting experience
T-Type Hinges
Highly tolerant
· Reliable door closing in case of
accidental misalignment
· ‘ConfidentClose’ assured
Efficient performance in marginal values
of tolerances
Rigidity Low hinge cup drilling depth Proven Glissando concept
· Damper is positioned
transversal on the hinge cup
· Reliable performance
Enables application on door thicknesses
from 15mm on
‘Titus Damper Inside’
· Titus proprietary multi-purpose damping
technology
· Reliable and consistent
life-long damping
· No rebounce
Easy door installation even in
cases of 4-5 hinges per door · Hinge-to-plate attachment assures
stability and rigidity
· Smooth performance
‘3Way’ snap-on
· Allows for intuitive hinge-to-plate
mounting in three directions
· Enhanced mounting experience
T-Type Hinges
Highly tolerant
· Reliable door closing in case of
accidental misalignment
· ‘ConfidentClose’ assured
Efficient performance in marginal values
of tolerances
Rigidity Low hinge cup drilling depth Proven Glissando concept
· Damper is positioned
transversal on the hinge cup
· Reliable performance
Enables application on door thicknesses
from 15mm on
‘Titus Damper Inside’
· Titus proprietary multi-purpose damping
technology
· Reliable and consistent
life-long damping
· No rebounce
Easy door installation even in
cases of 4-5 hinges per door · Hinge-to-plate attachment assures
stability and rigidity
· Smooth performance
Easy door installation
even in cases of
4-5 hinges per door
· Easy and quick assembly
and disassembly
· Flexibility for the furniture user
· Tight hinge-to-plate joint
improves hinge stability
and reduces door sag
Highly tolerant
· Efficient performance in
marginal values of tolerance
· Reliable door closing in case
of accidental misalignment
· ‘ConfidentClose’ assured
Rigidity
· Hinge-to-plate attachment
assures stability and rigidity
· Smooth performance
T-type Hinges
2.41
Concealed Hinges Concealed Hinges
‘3Way’ snap-on
· Allows for intuitive hinge-to-plate
mounting in three directions
· Enhanced mounting experience
T-Type Hinges
Highly tolerant
· Reliable door closing in case of
accidental misalignment
· ‘ConfidentClose’ assured
Efficient performance in marginal values
of tolerances
Rigidity Low hinge cup drilling depth Proven Glissando concept
· Damper is positioned
transversal on the hinge cup
· Reliable performance
Enables application on door thicknesses
from 15mm on
‘Titus Damper Inside’
· Titus proprietary multi-purpose damping
technology
· Reliable and consistent
life-long damping
· No rebounce
Easy door installation even in
cases of 4-5 hinges per door · Hinge-to-plate attachment assures
stability and rigidity
· Smooth performance
‘3Way’ snap-on
· Allows for intuitive hinge-to-plate
mounting in three directions
· Enhanced mounting experience
T-Type Hinges
Highly tolerant
· Reliable door closing in case of
accidental misalignment
· ‘ConfidentClose’ assured
Efficient performance in marginal values
of tolerances
Rigidity Low hinge cup drilling depth Proven Glissando concept
· Damper is positioned
transversal on the hinge cup
· Reliable performance
Enables application on door thicknesses
from 15mm on
‘Titus Damper Inside’
· Titus proprietary multi-purpose damping
technology
· Reliable and consistent
life-long damping
· No rebounce
Easy door installation even in
cases of 4-5 hinges per door · Hinge-to-plate attachment assures
stability and rigidity
· Smooth performance
‘3Way’ snap-on
· Allows for intuitive hinge-to-plate
mounting in three directions
· Enhanced mounting experience
T-Type Hinges
Highly tolerant
· Reliable door closing in case of
accidental misalignment
· ‘ConfidentClose’ assured
Efficient performance in marginal values
of tolerances
Rigidity Low hinge cup drilling depth Proven Glissando concept
· Damper is positioned
transversal on the hinge cup
· Reliable performance
Enables application on door thicknesses
from 15mm on
‘Titus Damper Inside’
· Titus proprietary multi-purpose damping
technology
· Reliable and consistent
life-long damping
· No rebounce
Easy door installation even in
cases of 4-5 hinges per door · Hinge-to-plate attachment assures
stability and rigidity
· Smooth performance
Proven Glissando concept
· Damper is positioned
transversal on the hinge cup
· Reliable performance
Adjustable damping
· Consistent performance on
doors of different dimensions
and weights
· Intuitive adjustment procedure
‘Titus Damper Inside’
· Titus proprietary multi-purpose
damping technology
· Reliable and consistent
life-long damping
· No rebounce
T-type Hinges
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.42
Concealed Hinges
Door Overlay
SAMPLE
SAMPLE
How to Achieve the Desired Door Overlay
Choose the hinge of
appropriate cranking
Choose the mounting
plates of appropriate
thickness
Choose the
appropriate drilling
distance (K)
Concealed hinges with specific hinge
arms are available for different door
overlays. The most common overlays are:
1. Full overlay
Use a hinge with 0mm cranking
2. Partial overlay for double doors
Use a hinge with 5mm or 9mm
cranking
3. Inset door
Use a hinge with 15mm
or 17mm cranking
Cabinet side
Door
To achieve the desired overlay (x) while
using a determined drilling distance (K),
a mounting plate of appropriate
To achieve the desired door overlay (x)
while using a determined mounting plate
thickness (D), an appropriate drilling
distance (K) must be chosen.
thickness (D) must be chosen from
the enclosed table or calculated
with the given formula.
x 4 5 6 7 8 9
K
3 3 2 1 0
4 3 2 1 0
5 3 2 1 0 D
D=4+K-x
x 4 5 6 7 8 9
D
0 3 4 5
1 3 4 5
2 3 4 5
3 3 4 5 K
D
x
K
D
x
K
2.43
Concealed Hinges
SAMPLE
Through side
adjustment
Door clearance
and gap
The side adjustment is made
by rotating the appropriate screw
on the hinge arm.
The door clearance (F≥Fmin) and
gap (Z) represent the minimal
necessary space needed for the
correct opening and closing of the
door. The minimal required values
depend on the cup drilling distance
(K), door thickness (V).
and the type of hinge. The minimum
clearance scale can be found on
product pages > see Door (page)
clearance chart. When using
hinges with partial overlay the door
clearance must be twice as large
(F≥2Fmin).
Adjustment
range
V 16 17 18 19 20 21 22
K
3 0.3 0.5 0.7 1.0 1.3 1.7 2.5
4 0.3 0.5 0.7 0.9 1.2 1.6 2.1
5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
Z V
K
F
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.44
Concealed Hinges
Hinge Cup Types
How to Mount the Hinge on the Door
'EasyFix' time
saving system
No pre-mounting
Machine insertion
ready hinge cup
Pre-mounted
expando dowels
There are cup type symbols listed on
product pages beside item numbers.
Below you can find their explanation.
Quarter turn fixing for 8mm holes
(interaxis 45/9.5) or 10mm holes (interaxis
48/6 and 52/5.5).
The hinge is fixed on the door
with two screws.
3mm pilot holes recommended.
Pre-mounted dowels suitable for machine
insertion into 8mm holes (interaxis 45/9.5)
or 10mm holes (interaxis 48/6 and 52/5.5).
Pre-mounted expanding dowels with
triple-start screw for fast fixing, suitable
for 8mm holes.
90º
2.45
Hinge cup with
Concealed Hinges
pre-mounted euro
screws
Hinge cup with
pre-mounted
chipboard screws
Aluminium frame
screw-on hinge cup
Pre-mounted euro screws for 5mm holes.
Where not specified otherwise, euro
screws are 13mm long.
Pre-mounted chipboard screws.
3mm pilot holes recommended.
The hinge is fixed onto a specific drilling
on the aluminium frame.
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.46
Drilling Patterns for Hinge Cup
Interaxis
45mm, 48mm* and 52mm
· T-type
· S-type
· B-type
*Available on special request > see page 0.3
Interaxis is the distance between
two holes for fixing screws on the hinge cup.
Hinge
cup type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Drilling
pattern
Drilling
pattern
Drilling
pattern
Screw-on
ready
Premounted
chipboard
screws
Machine
insertion
ready
Premounted
expando
dowels
EasyFix
system
Premounted
euro screws
45
9.5
Ø 35
48
6
Ø 35
52
5.5
Ø 35
45 35
8
9.5
48 35
10
6
45 35
5
9.5
48 35
5
6
52 35
5
5.5
45 35
9.5
48 35
6
52 35
5.5
52 35
10
5.5
Concealed Hinges
Boring Details
2.47
Concealed Hinges
How to Fix the Mounting Plate on the Cabinet Side
There are mounting plate type symbols
listed on product pages beside item
numbers. Below you can find their
explanation.
No premounting,
chipboard screw ready
No premounting,
euro screw ready
Premounted
euro screws
Machine insertion ready
Premounted
expanding dowels
Premounted
chipboard screws
The mounting plate is fixed
with two chipboard screws
or equivalent.
3mm pilot holes recommended.
Fixing with 6.3mm euro screws into
pre-drilled 5mm holes. Choosing the
appropriate head and length for use with
this mounting plate is recommended.
Euro screws for 5mm holes are
premounted on the mounting plate.
Available lengths: 11mm, 13mm and
15mm.
Premounted dowels for machine insertion
into 10mm holes.
Premounted expanding dowels
for 5mm holes.
Available lengths: 7.5mm and 10.5mm.
The mounting plate is fixed with two
premounted chipboard screws.
3mm pilot holes recommended.
Concealed Hinges
Mounting Plate Type
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.48
Concealed Hinges
Hinge-to-plate Mounting
How to Assemble the Hinge and the Mounting Plate
T-type
‘3Way’ snap-on
‘3Way’ snap-on mounting for
intuitive hinge-to-plate assembly in
three directions:
- from the hinge arm front
- from the hinge arm rear
- from the top
Front assembly
Rear assembly
Top assembly
Disassembly:
For disassembly press rear
button on the hinge arm.
2.49
Concealed Hinges
S-type
snap-on
B-type
slide-on
Key-hole
· *Wide Angle hinge
The door is assembled on the cabinet
side simply by positioning the two
hooks under the hinge arm on the outer
part of the mounting plate and pressing
gently on the rear part of the hinge arm.
For disassembly, press the rear button
on the hinge arm.
The hinge is assembled by sliding
the hinge arm over the mounting plate.
The hinge adjustment screw must fit into
the groove on the mounting plate.
The hinge is assembled on the mounting
plate by inserting the fixing screw on the
appropriate hole on the hinge arm.
After adjusting the door depth, the
mounting procedure is finished by
tightening the fixing screw.
After adjusting the door depth, the
mounting procedure is finished by
tightening the fixing screw.
Assembly
Disassembly
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.50
Concealed Hinges
Loadings
Use the appropriate number of hinges
so that the door height or weight does
not exceed that shown below.
How Many Hinges per Door?
Concealed hinges with
Ø35mm hinge cup diameter
· T-type
· S-type
· B-type
· Other hinges
· T-type Glissando
Check the enclosed specifications for the
number of required hinges per door by
considering door height and weight.
Note:
Hinges with integrated damping can be
combined with non-damped hinges from
standard hinge range. A trial mounting is
always recommended.
height
(cm)
weight
(kg)
height
(cm)
weight
(kg)
2
3
4
5
4-7 8-12 13-16 17-22
50
100
150
200
250
2
3
4
5
4-7 8-12 13-16 17-22
50
100
150
200
250
2.51
Concealed Hinges
Concealed Hinges
Adjustment
Adjustment range can be found i on the product pages.
Side Adjustment
Rotate the appropriate screw
· T-type
· S-type
· B-type
By temporarily loosening
the fixing screw
· *Wide Angle hinge
The side adjustment aligns the door
with the side of the cabinet.
The side adjustment is made
by rotating the screw on the hinge arm.
For the side adjustment:
1. Release the fixing screw
2. Make the necessary adjustment by
rotating the appropriate screw
3. Tighten the fixing screw
Without releasing the fixing screw no side
adjustment is possible.
Adjustment
range
Adjustment range
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.52
Concealed Hinges
Adjustment
Height Adjustment
Rotate the
cam adjuster
· T-type with cam
adjustable cruciform
mounting plate
· T-type with cam
adjustable linear
mounting plate
· S-type with cam
adjustable cruciform
mounting plate
Height adjustment is necessary
to achieve optimal vertical door position.
The height adjustment is made
by rotating the cam adjuster
on the mounting plate.
-2 -2 +2 +2 -2 -2 +2 +2 -2 -2 +2 +2 -2 -2 +2 +2 +2 -2
2.53
Concealed Hinges
Releasing the screw slot
· T-type and S-type with
cruciform mounting plate
· B-type
· *Wide Angle hinge
For height adjustment the two
mounting plate fixing screws have
to be temporarily released while making
the manual adjustment.
+2 -2
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.54
Concealed Hinges
Adjustment
Depth Adjustment
Rotating the cam adjuster
· T-type
· S-type Plus
The system enables easy adjustment of the
gap between door and cabinet.
Rotate the cam adjuster on the hinge arm.
The depth adjustment is made
by temporarily releasing the adjustment
screw (S-type) or fixing screw
(B-type, Hinge Ø40). After the adjustment is
made the screw has to
be re-tightened.
Release the fixing
or adjustment screw
· S-type
· B-type
Adjustment
range
+/-1.5+/-1.5
-2 +2
+4/-1
-2 +2
+4/-1
+-/1.5
2.55
Concealed Hinges
Door Closing Type
Concealed hinges with
self-closing angle
· T-type
· S-type
· B-type
Free-swinging
door hinges*
The self-closing angle is the point
from which the door will close by
itself, without user assistance. The
mechanism starts closing the door from
a 14° to 25° angle, depending on the
concealed hinge type. From that point
to the maximum opening angle the door
remains in an open position.
Optionally most of Titus concealed
hinges can be supplied without the selfclosing mechanism. These hinges may
be ordered upon request. Soft closing
devices can not be used with freeswinging door hinges.
* Available upon special request, speak to your
Technical Sales Representative.
There are two door
closing systems:
self closing
free swinging
Most of Titus hinges can be combined
with soft closing devices.
> see page 2.116 for details
Titus
recommends!
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.56
Concealed Hinges
Adjustment
100% 85% 70%
Damping Adjustment
T-type Glissando
S-type-i Plus series
S-type-i series
B-type-i series
The damping action can be adjusted to
fit different door weights and sizes which
enables perfect door functioning.
To decrease or to increase the damping,
change the position of the damping
reduction switch. Hinges are factory pre-set
to the maximum damping value.
Damping force change
The damping reduction switch
adjusts the damping. Example
shows the damping change in
case of two hinges on door.
The damping reduction
switch in a pre-set position.
Hinge set at the maximum damping value
Hinge set at the lowest damping value
damping
force
To decrease the damping
1. Lift the damping activator.
2. Slide the damping
reduction switch to
opposite position.
To increase the damping,
slide the damping reduction
switch back to the factory
pre-set position.
Damping is factory pre-set to
the medium damping value.
Turn towards ‘+’ to increase and
‘-’ to decrease the damping.
Adjustment of the damping force
ST-i ‘snap-on’ hinges
Basic-i ‘slide-on’ hinges
Damping force change
To decrease or to increase the damping
force, change to position of the
damping reduction switch.
The damping force is factory pre-set to
the maximum damping value.
2 1
The damping reduction
switch in a pre-set
position
To decrease the damping force
1. Lift the damping activator.
2. Slide the damping reduction switch to opposite position.
To increase the damping force, slide the damping reduction switch back to the factory pre-set
position.
The damping reduction switch
adjusts the force of damping.
Example shows the
damping force change in case of
two hinges on door.
Hinge set at the maximum damping value
Hinge set at the lowest damping value
100% 85% %07 damping
force
Adjustment of the damping force
ST-i ‘snap-on’ hinges
Basic-i ‘slide-on’ hinges
Damping force change
To decrease or to increase the damping
force, change to position of the
damping reduction switch.
The damping force is factory pre-set to
the maximum damping value.
2 1
The damping reduction
switch in a pre-set
position
To decrease the damping force
1. Lift the damping activator.
2. Slide the damping reduction switch to opposite position.
To increase the damping force, slide the damping reduction switch back to the factory pre-set
position.
The damping reduction switch
adjusts the force of damping.
Example shows the
damping force change in case of
two hinges on door.
Hinge set at the maximum damping value
Hinge set at the lowest damping value
100% 85% %07 damping
force
2.57
Concealed Hinges
Key Design Choices
'One-for-all'
efficiency principle
‘ConfidentClose’
The hinge is designed to
deliver consumer-preferred
soft closing motion.
Based on results of third party research
Positioning of damper transversal to the
hinge cup allows for consistent damping
across hinge variations.
Universal mounting plate platform for both
damped and non-damped hinges.
Flexibility to tune performance
for all applications.
· Consistent performance over a wide range
of doors of different sizes and weights
· Easy, accessible adjustment button for
intuitive and quick adjustment
· Efficient damping at any closing speed
· Reliable closing
· Damping force consistency
Adjustable damping
Titus Damper inside
Adjustable damping zone and force
Fast closing Late start of
deceleration action
Quiet landing with
‘SoftTouch’
Key design choices
Titus damping solutions
Damping in the hinge cup Damper is positioned transversal on the
hinge cup
· Allows for an easy and quick introduction
of various hinge versions: ST ‘snap-on’
and Basic ‘slide-on’ with different hinge
arm crankings and angles
· Standard hinge cup drilling depths:
requires no changes in drillings for hinge
cup
· Standard mounting plates
Adjustable damping force
Titus hydraulic damper
Flexibility to 'tune' performance for all
applications
· Optimal damping on various door
weights and sizes
· Intuitive and quick adjustment
· Easily accessible adjustment button
Titus hydraulic damper, designed and produced in-house
· Reliable and consistent life-long damping
· Minimum damper rebounce
· Dampers’ consistency over high volume
production runs assured
Adjustable damping zone and force
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.58
T-type Glissando 110
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
0mm
701.0AT0.054.00
701.0AT1.054.00 701.0AP1.054.00
701.0AT4.054.00 701.0AP4.054.00
Drilling patterns for hinge cups >
see page 2.44
Made of steel
For wooden doors
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
K 42.5
11.7 11.4
26.1
65.4
45
9.5
Ø 35
52
5.5
Ø 35
Cover caps for hinge arm
> see page 2.106
2.59
Concealed Hinges
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
0mm
701.0AT0.054.00
701.0AT1.054.00 701.0AP1.054.00
701.0AT4.054.00 701.0AP4.054.00
Drilling patterns for hinge cups >
see page 2.44
Made of steel
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+4/-1mm
For further explanation > see page 2.54 For further explanation > see pages 2.51-2.53
Damping adjustment Door adjustment
37
x 4 5 6 7 8 9 10
K
3 3 2 1 0
4 4 3 2 1 0
5 4 3 2 1 0
6 4 3 2 1 0 D
D=4+K.x
Drawings show application on
D=0mm thick mounting plate
V
K
S27.5
19.6
D
67.5
37
X
F>2Fmin
V
K
S27.5
19.6
D
67.5
37
X
F>2Fmin
Door clearance at R=1mm
For further explanation > see page 2.42
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.60
T-type Glissando 110
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
9mm
701.0CT0.054.00
701.0CT1.054.00 701.0CP1.054.00
701.0CT4.054.00 701.0CP4.054.00
Drilling patterns for hinge cups >
see page 2.44
Cranking
17mm
701.0DT0.054.00
701.0DT1.054.00 701.0DP1.054.00
Made of steel
701.0DT4.054.00 701.0DP4.054.00
Drilling patterns for hinge cups >
see page 2.44
For wooden doors
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
45
9.5
Ø 35
52
5.5
Ø 35
Cover caps for hinge arm
> see page 2.106
K 42.5
11.7 11.4
26.1
65.4
K 42.5
11.7 11.4
26.1
65.4
2.61
Concealed Hinges
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
9mm
701.0CT0.054.00
701.0CT1.054.00 701.0CP1.054.00
701.0CT4.054.00 701.0CP4.054.00
Drilling patterns for hinge cups >
see page 2.44
Cranking
17mm
701.0DT0.054.00
701.0DT1.054.00 701.0DP1.054.00
Made of steel
701.0DT4.054.00 701.0DP4.054.00
Drilling patterns for hinge cups >
see page 2.44
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+4/-1mm
For further explanation > see page 2.54 For further explanation > see pages 2.51-2.53
Damping adjustment Door adjustment
Door clearance at R=1mm
For further explanation > see page 2.42
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
37
x 4 5 6 7 8 9 10
K
3 3 2 1 0
4 4 3 2 1 0
5 4 3 2 1 0
6 4 3 2 1 0 D
D=4+K-x
Drawings show application on
D=0mm thick mounting plate
V
K
S27.5
19.6
D
67.5
37
Z X
F>2Fmin
V
K
S27.5
19.6
D
67.5
37
Z X
F>2Fmin
37+V
V 16 17 18 19 20 21 22 23 24
K
3 0 0 0 0 1 1 1 1 2
4 1 1 1 1 2 2 2 2 3
5 2 2 2 2 3 3 3 3 4
6 3 3 3 3 4 4 4 4 D
D= 4+K+F Drawings show application on
D=2mm thick mounting plate V
K 37.5 S
29.6
D
68.6
37
F>Fmin
V
K 37.5 S
29.6
D
68.6
37
F>Fmin
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.62
T-type Glissando 110/45°
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
17mm
701.0B08.054.00
701.0C54.650.00 701.0C58.650.00
Drilling patterns for hinge cups >
see page 2.44
Cup made of steel, arm made of zinc
45° angled application for wooden doors
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
45
9.5
Ø 35
52
5.5
Ø 35
Cover caps for hinge arm
> see page 2.106
K 42.5
11.7 11.4
26.1
65.4
2.63
Concealed Hinges
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
17mm
701.0B08.054.00
701.0C54.650.00 701.0C58.650.00
Drilling patterns for hinge cups >
see page 2.44
Cup made of steel, arm made of zinc
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+2.5/-2.5mm
For further explanation > see page 2.54 For further explanation > see pages 2.51-2.53
Damping adjustment Door adjustment
Door clearance at R=1mm
For further explanation > see page 2.42
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
L
31.7
12.5
75.6
L
SD
x
P
K
V
45º
37
31.7
12.5
67.6
SD
P
K
V
45º
Drawings show application on
D=0mm thick mounting plate
L=45 for thickness D=0
L=44 for thickness D=1
L=43 for thickness D=2
L=42 for thickness D=3
L=41 for thickness D=4
X 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 6
K
3 2 1 0
4 2 1 0
5 3 2 1 0
6 4 3 2 1 0 D
Drawings show application on
D=0mm thick mounting plate
P 0 0.5 1 1.5 2 2.5 3 3.5 4
K
3 2 1 0
4 3 2 1 0
5 3 2 1 0
6 4 3 2 1 0 D
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.64
T-type Glissando 110/90°
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
17mm
701.0A96.054.00
701.0D36.054.00 701.0D40.650.00
701.0D30.650.00 701.0D34.650.00
Drilling patterns for hinge cups >
see page 2.44
Cup made of steel, arm made of zinc
For wooden door cabinets with blind panels
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
45
9.5
Ø 35
52
5.5
Ø 35
Cover caps for hinge arm
> see page 2.106
K 42.5
11.7 11.4
26.1
65.4
2.65
Concealed Hinges
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
17mm
701.0A96.054.00
701.0D36.054.00 701.0D40.650.00
701.0D30.650.00 701.0D34.650.00
Drilling patterns for hinge cups >
see page 2.44
Cup made of steel, arm made of zinc
Mounting details Mounting plate drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+2.5/-2.5mm
For further explanation > see page 2.54 For further explanation > see pages 2.51-2.53
Damping adjustment Door adjustment
Door clearance at R=1mm
For further explanation > see page 2.42
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
21.5
52
V
21
F K
Drawings show application on
D=2mm thick mounting plate
Drawings show application on
D=2mm thick mounting plate
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.66
T-type 110
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
0mm
702.0AK0.054.00
702.0AK1.054.00 702.0AM1.054.00
702.0AK4.054.00 702.0AM4.054.00
Drilling patterns for hinge cups >
see page 2.44
Made of steel
For wooden doors
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
45
9.5
Ø 35
52
5.5
Ø 35
Cover caps for hinge arm
> see page 2.106
37.4
62.1
K
3.2 11.7
Push latch
> see page 2.102
2.67
Concealed Hinges
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
0mm
702.0AK0.054.00
702.0AK1.054.00 702.0AM1.054.00
702.0AK4.054.00 702.0AM4.054.00
Drilling patterns for hinge cups >
see page 2.44
Made of steel
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+4/-1mm
For further explanation > see pages 2.51-2.53
Door adjustment
Door clearance at R=1mm
For further explanation > see page 2.42
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
37
x 13 14 15 16 17 18 19
K
3 3 2 1 0
4 4 3 2 1 0
5 4 3 2 1 0
6 4 3 2 1 0 D
D=13+K-x Drawings show application on
D=0mm thick mounting plate
S18.5
V
K
10.6
D
67.5
37
X
F>Fmin
S18.5
V
K
10.6
D
67.5
37
X
F>Fmin
Soft closing systems
Glissando TT
> see page 2.118
Glissando CR
> see page 2.124
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.68
T-type 110
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
9mm
702.0CK0.054.00
702.0CK1.054.00 702.0CM1.054.00
702.0CK4.054.00 702.0CM4.054.00
Drilling patterns for hinge cups >
see page 2.44
Cranking
17mm
702.0DK0.054.00
702.0DK1.054.00 702.0DM1.054.00
702.0DK4.054.00 702.0DM4.054.00
Drilling patterns for hinge cups >
see page 2.44
For wooden doors
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
45
9.5
Ø 35
52
5.5
Ø 35
Cover caps for hinge arm
> see page 2.106
Push latch
> see page 2.102
37.4
62.1
K
3.2 11.7
37.4
62.1
K
3.2 11.7
2.69
Concealed Hinges
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
9mm
702.0CK0.054.00
702.0CK1.054.00 702.0CM1.054.00
702.0CK4.054.00 702.0CM4.054.00
Drilling patterns for hinge cups >
see page 2.44
Cranking
17mm
702.0DK0.054.00
702.0DK1.054.00 702.0DM1.054.00
702.0DK4.054.00 702.0DM4.054.00
Drilling patterns for hinge cups >
see page 2.44
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+4/-1mm
For further explanation > see pages 2.51-2.53
Door adjustment
Door clearance at R=1mm
For further explanation > see page 2.42
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
Soft closing systems
Glissando TT
> see page 2.118
Glissando CR
> see page 2.124
37
x 4 5 6 7 8 9 10
K
3 3 2 1 0
4 4 3 2 1 0
5 4 3 2 1 0
6 4 3 2 1 0 D
D=4+K.x
Drawings show application on
D=0mm thick mounting plate
V
K
S27.5
19.6
D
67.5
37
X
F>2Fmin
V
K
S27.5
19.6
D
67.5
37
X
F>2Fmin
37+V
V 16 17 18 19 20 21 22 23 24
K
3 0 0 0 0 1 1 1 1 2
4 1 1 1 1 2 2 2 2 3
5 2 2 2 2 3 3 3 3 4
6 3 3 3 3 4 4 4 4 D
D=4+K+F
Drawings show application on
D=2mm thick mounting plate
V
K 37.5 S
29.6
D
68.6
37
F>Fmin
V
K 37.5 S
29.6
D
68.6
37
F>Fmin
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.70
T-type 110/45°
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
17mm
702.0B07.054.00
702.0C53.650.00 702.0C57.650.00
Drilling patterns for hinge cups >
see page 2.44
Cup made of steel, arm made of zinc
45° angled application for wooden doors
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
45
9.5
Ø 35
52
5.5
Ø 35
Cover caps for hinge arm
> see page 2.106
37.4
62.1
K
3.2 11.7
31.7
12.5
67.6
2.71
Concealed Hinges
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
17mm
702.0B07.054.00
702.0C53.650.00 702.0C57.650.00
Drilling patterns for hinge cups >
see page 2.44
Cup made of steel, arm made of zinc
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+2.5/-2.5mm
For further explanation > see pages 2.51-2.53
Door adjustment
Door clearance at R=1mm
For further explanation > see page 2.42
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
31.7
12.5
75.6
L
SD
X
P
K
V
45º
L
37
31.7
12.5
67.6
SD
P
K
V
45º
Drawings show application on
D=0mm thick mounting plate
L=45 for thickness D=0
L=44 for thickness D=1
L=43 for thickness D=2
L=42 for thickness D=3
L=41 for thickness D=4
X 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 6
K
3 2 1 0
4 2 1 0
5 3 2 1 0
6 4 3 2 1 0 D
Drawings show application on
D=0mm thick mounting plate
P 0 0.5 1 1.5 2 2.5 3 3.5 4
K
3 2 1 0
4 3 2 1 0
5 3 2 1 0
6 4 3 2 1 0 D
Soft closing systems
Glissando TT
> see page 2.118
Glissando CR
> see page 2.124
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.72
T-type 110/90°
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
17mm
702.0A95.054.00
702.0D35.650.00 702.0D39.650.00
702.0D29.650.00 702.0D33.650.00
Drilling patterns for hinge cups >
see page 2.44
Cup made of steel, arm made of zinc
For wooden door cabinets with blind panels
110°
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
45
9.5
Ø 35
52
5.5
Ø 35
Cover caps for hinge arm
> see page 2.106
37.4
62.1
K
3.2 11.7
2.73
Concealed Hinges
Technical details
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
17mm
702.0A95.054.00
702.0D35.650.00 702.0D39.650.00
702.0D29.650.00 702.0D33.650.00
Drilling patterns for hinge cups >
see page 2.44
Cup made of steel, arm made of zinc
Mounting details Mounting plate drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+2.5/-2.5mm
For further explanation > see pages 2.51-2.53
Door adjustment
Door clearance at R=1mm
For further explanation > see page 2.42
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
Soft closing systems
Glissando TT
> see page 2.118
Glissando CR
> see page 2.124
K
52
V
21
F 21.5
Drawings show application on
D=2mm thick mounting plate
Drawings show application on
D=2mm thick mounting plate
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.74
T-type 170
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
0mm
702.0EK0.054.00
702.0EK1.054.00 702.0EM1.054.00
702.0EK4.054.00 702.0EM4.054.00
Drilling patterns for hinge cups >
see page 2.44
Cranking
9mm
702.0GK0.054.00*
702.0GK1.054.00*
702.0GK4.054.00*
Drilling patterns for hinge cups >
see page 2.44
For wooden doors
170°
· Opening angle 165˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 12mm
· Hinge on plate mounting system ‘3Way’ snap-on
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
45
9.5
Ø 35
52
5.5
Ø 35
Push latch
> see page 2.102
2.75
Concealed Hinges
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
0mm
702.0EK0.054.00
702.0EK1.054.00 702.0EM1.054.00
702.0EK4.054.00 702.0EM4.054.00
Drilling patterns for hinge cups >
see page 2.44
Cranking
9mm
702.0GK0.054.00*
702.0GK1.054.00*
702.0GK4.054.00*
Drilling patterns for hinge cups >
see page 2.44
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 165˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 12mm
· Hinge on plate mounting system ‘3Way’ snap-on
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+4/-1mm
For further explanation > see pages 2.51-2.53
Door adjustment
Door clearance at R=1mm
For further explanation > see page 2.42
V 16 17 18 19 20 21 22 23 24 25 26
K
3 0.5 0.7 0.8 1 1.2 1.5 1.7 2.1 2.8 4.1 5.5
4 0.4 0.7 0.8 1 1.2 1.5 1.7 2.1 2.3 3.1 4.5
5 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 3.5
6 0.4 0.6 0.7 0.9 1.1 1.4 1.6 2 2.2 2.6 2.9 FMIN
Gap ZMIN=0
Soft closing systems
Glissando TL 170
> see page 2.118
Glissando CR
> see page 2.124
37
x 13 14 15 16 17 18 19
K
3 3 2 1 0
4 4 3 2 1 0
5 4 3 2 1 0
6 4 3 2 1 0 D
D=13+K-x
Drawings show application on
D=0mm mounting plate
In 90°position the door is only
1.4mm distant from side panel
37
C
52
D
7
37
67
F>Fmin
S
K
V
-1.4
90°
x 13 14 15 16 17 18 19
K
3 3 2 1 0
4 4 3 2 1 0
5 4 3 2 1 0
6 4 3 2 1 0 D
D=13+K-x Drawings show application on
D=0mm thick mounting plate
Drawings show application on
D=0mm thick mounting plate
37
V 67
F>2Fmin
D
61 S
V 67
70 S 79 S
V 67
C
K
7.6
F>Fmin
61 19
D
x
37
67 19
90˚
37
V 67
F>2Fmin
D
61 S
V 67
70 S 79 S
V 67
C
K
7.6
F>Fmin
61 S
D
x
37
67 V
90˚
37
V 67
F>2Fmin
D
61 S
V 67
70 S 79 S
V 67
C
K
7.6
F>Fmin
61 19
D
x
37
67 19
90˚
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.76
T-type
For Pie-cut Corner Cabinet
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Corner Cabinet 721.0PK0.650.00
721.0PK4.650.00 721.0PM4.650.00
Drilling patterns for hinge cups >
see page 2.44
For wooden doors
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
45
9.5
Ø 35
Push latch
> see page 2.102
Cup made of steel, arm made of zinc
52
5.5
Ø 35
110 deg
110 deg
alCE 191.3 Tf
2.77
Concealed Hinges
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Corner Cabinet 721.0PK0.650.00
721.0PK4.650.00 721.0PM4.650.00
Drilling patterns for hinge cups >
see page 2.44
Mounting details
Mounting plate
drilling distance Adjustments
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.7mm
· Hinge on plate mounting system ‘3Way’ snap-on
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable cruciform
mounting plate
> see page 2.78
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
EasyFix
system
Cruciform mounting
plate
> see page 2.80
Accessories
Cam adjustable linear
mounting plate
> see page 2.78
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+2.5/-2.5mm
For further explanation > see pages 2.51-2.53
Door adjustment
V=16-25mm
K=3-6
25°
19
19
D=2
-6
+6
-1
+3
+2.5 -2.5
70°
Any T-type-i mounting plate
thickness of D=0 can be used
The diagonal adjustment is made
by rotating the appropriate screw
as shown on the drawing
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.78
Item number Item number Item number
Cam Adjustable Cruciform
Mounting Plate 37mm 0mm 700.0KC0.054.00 700.0KA0.054.00 700.0KF0.054.00
2mm 700.0KC2.054.00 700.0KA2.054.00* 700.0KF2.054.00
3mm 700.0KC3.054.00 700.0KA3.054.00 700.0KF3.054.00
Cam Adjustable Linear
Mounting Plate 0mm 700.0LB0.054.00 700.0LF0.054.00
2mm 700.0LC2.650.00 700.0LB2.054.00 700.0LF2.054.00
3mm 700.0LC3.650.00 700.0LB3.054.00 700.0LF3.054.00
Drilling pattern Dimensions
T-type ‘3Way’ snap-on mounting
Mounting Plates
Made of steel
Made of steel and zinc
53
57.2
37
32
19.9
65.2
20 32
Legend of mounting plate type symbols
15 10.5
Premounted
15mm euro
screws
Screw-on ready
for chipboard
screws
< screws
Premounted
10.5mm
expanding
dowels
Fixing screw for cruciform mounting plate
If not premounted
Chipboard screws
611.8K16.235.016
1,000 pcs
6.9
15
3.5
6.9
15
3.5
2.79
Concealed Hinges
Item number Item number Item number
Cam Adjustable Cruciform
Mounting Plate 37mm 0mm 700.0KC0.054.00 700.0KA0.054.00 700.0KF0.054.00
2mm 700.0KC2.054.00 700.0KA2.054.00* 700.0KF2.054.00
3mm 700.0KC3.054.00 700.0KA3.054.00 700.0KF3.054.00
Cam Adjustable Linear
Mounting Plate 0mm 700.0LB0.054.00 700.0LF0.054.00
2mm 700.0LC2.650.00 700.0LB2.054.00 700.0LF2.054.00
3mm 700.0LC3.650.00 700.0LB3.054.00 700.0LF3.054.00 Mounting plate thickness (D) Mounting plate type
Ø5
min
11.5
15
Ø5
min
10.5
15 10.5
Legend of mounting plate type symbols
15 10.5
Premounted
15mm euro
screws
Screw-on ready
for chipboard
screws
< screws
Premounted
10.5mm
expanding
dowels
Mounting plate thickness Height adjustment +2/-2mm Height adjustment +2/-2mm
D
3.9
Fixing screw for cruciform mounting plate
If not premounted
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.80
Item number Item number Item number
Cruciform mounting plate 37mm 0mm 700.0NC0.054.00 700.0NF0.054.00
1mm 700.0NA1.054.00
2mm 700.0NA2.054.00 700.0NC2.054.00 700.0NF2.054.00
3mm 700.0NA3.054.00 700.0NC3.054.00 700.0NF3.054.00
Drilling pattern Dimensions
T-type ‘3Way’ snap-on mounting
Mounting Plates
Made of steel
Legend of mounting plate type symbols
15 10.5
Screw-on ready
for chipboard
screws
< screws
Premounted
15mm euro
screws
Premounted
10.5mm
expanding
dowels
37
32
53
57.2
Fixing screw for cruciform mounting plate
If not premounted
Chipboard screws
611.8K16.235.016
1,000 pcs
6.9
15
3.5
6.9
15
3.5
2.81
Concealed Hinges
Item number Item number Item number
Cruciform mounting plate 37mm 0mm 700.0NC0.054.00 700.0NF0.054.00
1mm 700.0NA1.054.00
2mm 700.0NA2.054.00 700.0NC2.054.00 700.0NF2.054.00
3mm 700.0NA3.054.00 700.0NC3.054.00 700.0NF3.054.00 Mounting plate thickness (D) Mounting plate type
Ø5
min
11.5
15
Ø5
min
10.5
15 10.5
3.9
Mounting plate thickness Height adjustment +2/-2mm Height adjustment +2/-2mm
D
Legend of mounting plate type symbols
15 10.5
Screw-on ready
for chipboard
screws
< screws
Premounted
15mm euro
screws
Premounted
10.5mm
expanding
dowels
Fixing screw for cruciform mounting plate
If not premounted
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.82
S-type Plus 110
Cup
type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Item number Item number Item number
Cranking
0mm
248.0T10.050 248.0T70.050
248.0T13.050 248.0T71.050 248.0T94.050
248.0T69.050 248.0T72.050 248.0T95.050
Drilling patterns for hinge cups > see page 2.44
Cranking
9mm
248.0V69.050
248.0V70.050
248.0V56.050
Drilling patterns for hinge cups > see page 2.44
For wooden doors
110°
45
9.5
Ø 35
52
5.5
Ø 35
48
Ø 35
6
· Quick, comfortable and precise depth adjustment
Made of steel
Made of steel
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
3.8
16
7.5
2.83
Concealed Hinges
Cup
type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Item number Item number Item number
Cranking
0mm
248.0T10.050 248.0T70.050
248.0T13.050 248.0T71.050 248.0T94.050
248.0T69.050 248.0T72.050 248.0T95.050
Drilling patterns for hinge cups > see page 2.44
Cranking
9mm
248.0V69.050
248.0V70.050
248.0V56.050
Drilling patterns for hinge cups > see page 2.44
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.5mm
· Hinge on plate mounting system Snap-on
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+1.5/-1.5mm
For further explanation > see pages 2.51-2.53
Door adjustment
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
Soft closing systems
Glissando TL
> see page 2.120
Glissando CR
> see page 2.124
Accessories
Cover caps for hinge arm
> see page 2.106
Push latch
> see page 2.102
x 13 14 15 16 17 18
3 3 2 1 0
K 4 3 2 1 0
5 3 2 1 0 D
S 17.8
D
7
37
37
63
F>Fmin x
V
K
z
S 17.8
D
7
37
37
63
F>Fmin x
V
K
z
Drawings show
application on D=0mm
thick mounting plate
x 4 5 6 7 8 9
3 3 2 1 0
K 4 3 2 1 0
5 3 2 1 0 D
z
S
26.7
D
16
37
37
63
F>2Fmin x
V
K
z
S
26.7
D
16
37
37
63
F>2Fmin x
V
K
Drawings show
application on D=0mm
thick mounting plate
F>Fmin
Door clearance
For further explanation > see page 2.42
V 16 17 18 19 20 21 22
3 0.3 0.5 0.7 1.0 1.3 1.7 2.5
K 4 0.3 0.5 0.7 0.9 1.2 1.6 2.1
5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.84
S-type 110
Cup
type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Item
number
Item
number
Item
number
Cranking
0mm
248.0538.050*
248.0400.050*
248.0366.050*
Drilling patterns for hinge cups > see page 2.44
Cranking
9mm
248.0536.050* 248.0539.050*
248.0327.050* 248.0401.050*
248.0482.050* 248.0545.050* 248.0549.050*
Drilling patterns for hinge cups > see page 2.44
Cranking
15mm
248.0537.050*
248.0280.050* 248.0328.050* 248.0402.050*
248.0487.050* 248.0551.050*
Drilling patterns for hinge cups > see page 2.44
For wooden doors
110°
45
9.5
Ø 35
52
5.5
Ø 35
48
Ø 35
6
· Quick and practical assembly of the hinge
and mounting plate by pressing gently on the rear
part of the hinge arm
· One button disassembly
Made of steel
Made of steel
Made of steel
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
3.8
16
7.5
2.85
Concealed Hinges
Cup
type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Item
number
Item
number
Item
number
Cranking
0mm
248.0538.050*
248.0400.050*
248.0366.050*
Drilling patterns for hinge cups > see page 2.44
Cranking
9mm
248.0536.050* 248.0539.050*
248.0327.050* 248.0401.050*
248.0482.050* 248.0545.050* 248.0549.050*
Drilling patterns for hinge cups > see page 2.44
Cranking
15mm
248.0537.050*
248.0280.050* 248.0328.050* 248.0402.050*
248.0487.050* 248.0551.050*
Drilling patterns for hinge cups > see page 2.44
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.5mm
· Hinge on plate mounting system Snap-on
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+5/-1.5mm
For further explanation > see pages 2.51-2.53
Door adjustment
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
Soft closing systems
Glissando TL
> see page 2.120
Glissando CR
> see page 2.124
Accessories
Cover caps for hinge arm
> see page 2.106
Push latch
> see page 2.102
F>Fmin
Door clearance
For further explanation > see page 2.42
V 16 17 18 19 20 21 22
3 0.3 0.5 0.7 1.0 1.3 1.7 2.5
K 4 0.3 0.5 0.7 0.9 1.2 1.6 2.1
5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
S 17.8
D
7
37
37
63
F>Fmin x
V
K
z
S 17.8
D
7
37
37
63
F>Fmin x
V
K
z
S 17.8
D
7
37
37
63
F>Fmin x
V
K
z
x 13 14 15 16 17 18
3 3 2 1 0
K 4 3 2 1 0
5 3 2 1 0 D
Drawings show
application on D=0mm
thick mounting plate
z
S
26.7
D
16
37
37
63
F>2Fmin x
V
K
z
S
26.7
D
16
37
37
63
F>2Fmin x
V
K
z
S
26.7
D
16
37
37
63
F>2Fmin x
V
K
x 4 5 6 7 8 9
3 3 2 1 0
K 4 3 2 1 0
5 3 2 1 0 D
Drawings show
application on D=0mm
thick mounting plate
K
S 35.7
D
25
37+V
37
63
F>Fmin
K
S 35.7
D
25
37+V
37
63
F>Fmin
K
S 35.7
D
25
37+V
37
63
F>Fmin
V 16 17 18 19 20 21
3 2 2 2 3 3 3
K 4 3 3 3
5 3 D
Drawings show
application on D=3mm
thick mounting plate
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.86
S-type 110/45°
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
18mm
248.0285.050
248.0N20.050 248.0291.050
Drilling patterns for hinge cups > see page
2.44
45° angled application for wooden doors
110°
45
9.5
Ø 35
52
5.5
Ø 35
Cup made of steel, arm made of zinc
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
3.8
16
7.5
2.87
Concealed Hinges
Cup
type
Interaxis
45mm
Interaxis
52mm
Item number Item number
Cranking
18mm
248.0285.050
248.0N20.050 248.0291.050
Drilling patterns for hinge cups > see page
2.44
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.5mm
· Hinge on plate mounting system Snap-on
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+5/-1.5mm
For further explanation > see pages 2.51-2.53
Door adjustment
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
F>Fmin
Door clearance
For further explanation > see page 2.42
V 16 17 18 19 20 21 22
3 0.3 0.5 0.7 1.0 1.3 1.7 2.5
K 4 0.3 0.5 0.7 0.9 1.2 1.6 2.1
5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
Soft closing systems
Glissando TL
> see page 2.120
Accessories
Cover caps for hinge arm
> see page 2.106
V
39 D S
15
63.5
45°
K
37
37
V
39 D S
15
63.5
45°
K
37
37
D=18
48
57 19
K
48
74.5
19
45º
D=18
48
57 19
K
48
74.5
19
45º
K 3 4 5
D 0 1 2
Drawings show
application on D=18mm
thick mounting plate
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.88
Cup
type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Item number Item number Item number
Cranking
18mm
248.0745.050 248.0748.050
248.0N24.050 248.0N25.050
248.0L61.050 248.0Z81.050
Drilling patterns for hinge cups > see page 2.12
S-type 110/90° For wooden door cabinets with blind panels
110°
45
9.5
Ø 35
52
5.5
Ø 35
48
Ø 35
6
Cup made of steel, arm made of zinc
EasyFix
system
110 deg
110 deg
alCE 191.3 Tf
3.8
16
7.5
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
2.89
Concealed Hinges
Cup
type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Item number Item number Item number
Cranking
18mm
248.0745.050 248.0748.050
248.0N24.050 248.0N25.050
248.0L61.050 248.0Z81.050
Drilling patterns for hinge cups > see page 2.12
Mounting details
Mounting plate
drilling distance
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.5mm
· Hinge on plate mounting system Snap-on
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+5/-1.5mm
For further explanation > see pages 2.51-2.53
Door adjustment
F>Fmin
Door clearance
For further explanation > see page 2.42
V 16 17 18 19 20 21 22
3 0.3 0.5 0.7 1.0 1.3 1.7 2.5
K 4 0.3 0.5 0.7 0.9 1.2 1.6 2.1
5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN
Gap ZMIN=0
Soft closing systems
Glissando TL
> see page 2.120
Accessories
Cover caps for hinge arm
> see page 2.106
K
V
F 37
3
63.5
19
D
37
min75
K
V
F 37
3
63.5
19
D
37
min7521 22
1
Drawings show
application on D=0mm
thick mounting plate
Drawings show
application on D=3mm
thick mounting plate
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.90
S-type 170
Cup
type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Item number Item number Item number
Cranking
0mm
248.0R17.050
248.0M73.050 248.0R13.050 248.0M74.050
248.0S17.050 248.0S18.050 248.0S19.050
Drilling patterns for hinge cups > see page 2.44
For wooden doors
135°-165°
45
9.5
Ø 35
52
5.5
Ø 35
48
Ø 35
6
· Enables better access into cabinet interior
due to the wider opening angle
· Opening angle can be easily adjusted by rotating
the appropriate screw on the hinge arm
Made of steel and zinc
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
3.8
16
7.5
2.91
Concealed Hinges
Cup
type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Item number Item number Item number
Cranking
0mm
248.0R17.050
248.0M73.050 248.0R13.050 248.0M74.050
248.0S17.050 248.0S18.050 248.0S19.050
Drilling patterns for hinge cups > see page 2.44
Mounting details
Mounting plate thickness table
For further explanation > see page 2.42
Mounting plate
drilling distance
· Opening angle 135˚-165˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 12mm
· Hinge on plate mounting system Snap-on
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+5/-1.5mm
For further explanation > see pages 2.51-2.53
Door adjustment
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
EasyFix
system
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
Soft closing systems
Glissando TL 170
> see page 2.120
Glissando CR
> see page 2.124
Accessories
Push latch
> see page 2.102
F>Fmin
Door clearance
For further explanation > see page 2.42
V 16 17 18 19 20 21 22 23 24
3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
K 4 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
6 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.6
7 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.1 FMIN
Gap ZMIN=0.5
37
C
52
D
7
37
67
F>Fmin
19
K
19
1.4
90°
37
C
52
D
7
37
67
F>Fmin
19
K
19
1.4
90°
X 10 11 12 13 14 15 16 17 18 19 20
3 6 5 4 3 2 1 0
K 4 6 5 4 3 2 1 0
5 6 5 4 3 2 1 0
6 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0 D
Drawings show
application on D=0mm
mounting plate
In 90°position the door is
only 1.4mm distant from
side panel
C value with D=0 mounting plates
K 3 4 5 6 7
C -9.0 -8.1 -7.1 -6.1 -5.2
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.92
S-type for Pie-cut
Corner Cabinet
Cup
type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Item
number
Item
number
Item
number
Corner Cabinet 248.0U21.050 248.0U16.050
248.0U22.050 248.0Z20.050
Drilling patterns for hinge cups > see page 2.44
For wooden doors
45
9.5
Ø 35
52
5.5
Ø 35
48
Ø 35
6
Cup made of steel, arm made of zinc
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
110 deg
110 deg
alCE 191.3 Tf
· Standard drilling for hinge and mounting plate
· Hinge integrated adjustment
3.8
16
7.5
2.93
Concealed Hinges
Cup
type
Interaxis
45mm
Interaxis
48mm
Interaxis
52mm
Item
number
Item
number
Item
number
Corner Cabinet 248.0U21.050 248.0U16.050
248.0U22.050 248.0Z20.050
Drilling patterns for hinge cups > see page 2.44
Mounting details Drilling details Adjustments
· Opening angle 110˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 11.5mm
· Hinge on plate mounting system Snap-on
Side
adjustment
+3/-1mm
Height
adjustment
+2/-2mm
Depth
adjustment
+5/-1.5mm
For further explanation > see pages 2.51-2.53
Door adjustment
Mounting plates Hinge cup screws
If not premounted
Legend of hinge cup symbols
Cam adjustable
mounting plate
> see page 2.94
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
Machine
insertion
ready
Steel mounting plates
> see page 2.96
Zinc diecast
mounting plates
> see page 2.96
Accessories
Cover caps for hinge arm
> see page 2.106
V = 16 - 22 mm
K = 3 - 5 mm K
32
35
37
D=3
+3
-1
v
11.5
+6
-2 +5
-1.5
Any S-type-i mounting plate
of thickness D=0 can be
used The diagonal adjustment is made
by rotating the appropriate screw
as shown on the drawing
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.94
Item number Item number
Cam Adjustable
Mounting Plate 0mm 244.0258.050 244.0270.050
2mm 244.0259.050 244.0271.050
3mm 244.0260.050
Drilling pattern Dimensions
S-type For all S-type concealed hinges
Mounting Plates
Made of steel
53
58
37 32
2.95
Concealed Hinges
Item number Item number
Cam Adjustable
Mounting Plate 0mm 244.0258.050 244.0270.050
2mm 244.0259.050 244.0271.050
3mm 244.0260.050 Mounting plate thickness (D) Mounting plate type
13 10.5
Mounting plate thickness Height adjustment +/- 2mm
13 10.5
Pre-mounted
13mm euro screws
Pre-mounted
10.5mm
expanding dowels
Legend of mounting plate type symbols
D
Z
Ø5
13
min
9.5
Ø6.3
Ø5
min
10.5
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.96
Item number Item number Item number
Steel Mounting Plates 0mm 244.1136.050 244.0134.050 244.0P26.050
1mm 244.0561.050
2mm 244.1138.050 244.0562.050 244.0V19.050
3mm 244.1139.050 244.0135.050 244.0P27.050
* Mounting plates with premounted 7.5mm expanding dowels available upon special request > see
page 0.3
Zinc Diecast Mounting Plates 9mm 244.3651.650 244.0M33.650
Drilling Pattern Dimensions
S-type For all S-type concealed hinges
Mounting Plates
Made of zinc
Made of steel
53
58
37 32
37 32
50
60
50
60
L
Ø8 Ø6.3
L
Ø8 Ø6.3
Euro screws
611.8E23.363.810 L=11
611.8E23.363.813 L=13
Fixing screws for mounting plates
If not pre-mounted
Chipboard screws
611.8K16.338.016
1000 pcs
3.8
16
7.5
2.97
Concealed Hinges
Item number Item number Item number
Steel Mounting Plates 0mm 244.1136.050 244.0134.050 244.0P26.050
1mm 244.0561.050
2mm 244.1138.050 244.0562.050 244.0V19.050
3mm 244.1139.050 244.0135.050 244.0P27.050
* Mounting plates with premounted 7.5mm expanding dowels available upon special request > see
page 0.3
Zinc Diecast Mounting Plates 9mm 244.3651.650 244.0M33.650 Mounting plate thickness (D) Mounting plate type
13 10.5
Mounting plate thickness Height adjustment +/- 2mm
Legend of mounting plate type symbols
D
Z
5.8 Ø5 min 10.5
Ø5
Ø6.313
min 10
13 10.5
Screw on ready
for euro screws
< screws, see
previous page
Premounted
13mm euro screws
Premounted
10.5mm
expanding dowels
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.98
B-type
Hinge Ø35 - Shallow Cup
Cup type
Interaxis
45mm
Item
number
Cranking
0mm
926.0A26.050*
Mounting plate included.
For wooden doors
108°
Made of steel
Hinge cup screws
If not premounted
Legend of hinge cup symbols
Ø35
K
17
C
32 32
11
S
V
37
B
A
MOUNTING PLATE
HEIGHT D
0
1
2
3
A B
(mm) (mm)
2,5 20
3,5 21
5,5 23
4,5 22
(mm)
CK(mm)
3 4.5
4 5.5
5
6
6.5
7.5
11.5
21 MIN 12 mm
8 mm-acjustment 2 mm
MIN = 6 mm
Ø5
Ø35
21.5
24
38
K
108°
37
14
8.7
Technical details
611.8K16.338.016
1,000 pcs
Screw-on
ready
< screws
3.8
16
7.5
2.99
Concealed Hinges
Cup type
Interaxis
45mm
Item
number
Cranking
0mm
926.0A26.050*
Mounting plate included.
Mounting details Mounting plate drilling distance Mounting plate thickness table
· Opening angle 108˚
· Drilling diameter for hinge cup 35mm
· Drilling depth 8.7mm
· Hinge on plate mounting system Slide-on
Hinge cup screws
If not premounted
Legend of hinge cup symbols Soft close systems
Glissando CR
972-0X19
> see page 2.124
Accessories
Push Latch
915-0X19
> see page 2.102
Drawing show application on
D=0mm thick mounting plate
Mounting plate is fixed
with 2 Euro screws
x
D=15+K-x
K 4
3
5
6
14
4
18
0
2
16
2
4
20
0
15
4
19
0
2
17
2
4
21
0 D
S
x
D
37
K
V
37
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.100
General Hinges
Finish Item number
1mm Butt Hinge 35 28 Steel Zinc Plated 610.8H40.401.500
1.6mm Butt Hinge 70 50 Steel Zinc Plated 610.8H40.401.550 Length (mm) Width (mm) Material
2.101
Concealed Hinges
General Hinges
Finish Item number
Piano Hinge Coil 25 Electro Brass 610.8H40.404.000
25 Nickel Plated 610.8H40.404.100
Furniture Hinge with Solid Pin Antique Brass 610.8H40.405.500
Bomber Hinge, 100mm
Light Duty Double Action Chrome Plated 610.8H40.407.960 Length (mm)
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.102
Push Latch
Item number
Push Latch 915.0X59 > 381.K1
915.0X59 > 381.K2
Catches Catch 915.7102.380*
Catch with base plate 915.7110.380*
Knock-in pad 915.7109.050*
Self-adhesive pad 915.7105.050*
For wooden doors and drawers
Grey
push push
Push latch
Cross mounting plate Linear mounting plate
Cross m. plate
Linear m. plate
Made of steel and plastic
13
Ø 8 Ø 6.3
7.5
12
7.5 4
12
4
1,000 pcs
Fixing screws for mounting plates
Euro screws
611.8E23.363.813
+
+
915.0X59.381.K1*
915.0X59.381.K2*
1,000 pcs
Chipboard screws
611.8K16.240.016
Made of plastic
Self adhesive pad
Catch
with base plate
Knock-in pad
Catch
2.103
Concealed Hinges
Item number
Push Latch 915.0X59 > 381.K1
915.0X59 > 381.K2
Catches Catch 915.7102.380*
Catch with base plate 915.7110.380*
Knock-in pad 915.7109.050*
Self-adhesive pad 915.7105.050*
Drilling pattern Dimensions
Euro screws
611.8E23.363.813
· Works with standard concealed hinges and drawers
· Effortless opening with just a light touch
· Depth adjustment ensures reliable closing and
consistent performance in cases of inaccurate drilling
· ‘Safety click’ feature for easy detachment of the
mechanism from the mounting plate
11.2
37
37
32
32
Ø6.4 (3x)
Ø6.4
Ø6.4
Ø5
20
16.5
Positioning
Close to the ‘touch opening point’,
on the side opposite to hinges
On the cabinet side gap between
drawer and cabinet side = min 12mm On the drawer bottom; in the middle of drawer
Push latch works with standard hinges.
Push latch works on drawer; the gap between
the drawer and the cabinet side = min. 12 mm
2
Minimum gap
required
43
Depth adjustment
+4.5 / -1mm
required
2
43
1,000 pcs
Chipboard screws
611.8K16.240.016
50
Ø10
12
19 9.5
Fixing of pad
depends on the catch position Catch Catch with base plate
Ø2 / 10 mm
pre-drilled hole
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.104
Push Catches
Item number
PushOpen Short 915.7187.350.00 14 White
915.7187.383.00 14 Grey
915.7185.350.00 14 White
915.7185.383.00 14 Grey
915.7192.350.00 White
915.7192.350.00 Grey
PushOpen Long 915.7188.350.00 37 White
915.7188.383.00 37 Grey
915.7186.350.00 37 White
915.7186.383.00 37 Grey
915.7193.350.00 White
915.7193.350.00 Grey
For doors
Finish
push
with Bumper
Made of plastic
Made of plastic
Stroke
with Bumper
with Magnet
with Magnet
Housing
Housing
with Bumper
with Bumper
with Magnet
with Magnet
Housing
Housing
Counter plate 15mm
915.7190.050.00
Self adhesive counter plate 15mm
915.7159.050.00
2.105
Concealed Hinges
Item number
PushOpen Short 915.7187.350.00 14 White
915.7187.383.00 14 Grey
915.7185.350.00 14 White
915.7185.383.00 14 Grey
915.7192.350.00 White
915.7192.350.00 Grey
PushOpen Long 915.7188.350.00 37 White
915.7188.383.00 37 Grey
915.7186.350.00 37 White
915.7186.383.00 37 Grey
915.7193.350.00 White
915.7193.350.00 Grey
Drilling pattern Dimensions
· Drill-in push catches available with and without housings
· Bumper options for use with standard hinged doors
· Magnet options for use with free-swinging or unsprung doors
· Depth Adjustment: +4/0mm by rotating adjustment screw
· ‘Safety click’ feature for easy detachment of the
mechanism from the mounting plate
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.106
Cover Caps
Plate
type
Material
surface Item number
For hinge arm
with Glissando
Titus Steel 248.1646 > 050
Titus Steel 728.1286 > 054.00
Generic Steel 728.1283 > 054.00
For hinge arms Nickel plated
Made of steel
Technical details
To improve appearance Titus recommends the
use of hinge arm cover plates with all compatible
concealed hinges.
Titus
recommends!
S-type
T-type
T-type
2.107
Glissando
Concealed Hinges Soft Close Damping Systems
Soft Closing
Systems
2.108
Soft Close Damping Systems
Product Guide
Glissando for Concealed Hinges
Add-on hinge soft closing solution
Stand-alone door soft closing solution
· Effortless silent and safe door closing
· Fits the hinge’s standard drilling
patterns
· Easy retrofit installation
· Adjustable to different door sizes
and weights
· Perfect door motion
· Doesn’t occupy additional space
inside the cabinet
Glissando TT
Glissando TL
Glissando TL 170
· Effortless silent and safe door closing
· Easy retrofit installation
· Adjustable to different door sizes
and weights
· Perfect door motion
Glissando CR
2.109
Concealed Hinges Soft Close Damping Systems
Titusoft for Drawers
Stand-alone drawer soft closing solution
· Effortless silent and safe door closing
· Self closing and soft closing
in single mechanism
· Safe drawer closing
· Easy retrofit installation
Titusoft WD for wooden drawers
Titusoft MD for metal drawers
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.110
Glissando
Soft Closing Range
How to Choose the Right Glissando
Glissando TT
Glissando TL
Glissando TL 170
Glissando CR
Titus Glissando soft closing system
is available for the whole range of hinge
applications. The user can choose
between add-on hinge or stand-alone
solutions.
Concealed hinges
Add-on hinge soft closing solutions Stand-alone door
soft closing solution
Glissando TT Glissando TL Glissando TL 170 Glissando CR
T-type 110 X X
T-type 110/45° X X
T-type 110/90° X X
T-type 170 X X
S-type plus 110 X X
S-type 110 X X
S-type 110/45° X X
S-type 110/90° X X
S-type 170 X X
B-type 110 X X
2.111
Concealed Hinges Soft Close Damping Systems
Glissando
Application
Glissando TT ‘One-for-all’
T-type · One item fits multiple applications
· Same item can be used on all
crankings and angled hinges
· Adjustable damping enables perfect
functioning on every door
· Designed to fit the concealed hinge cup
· Toolless mounting
· Suitable for different types of cabinets for
kitchens, living rooms, bathrooms and
other furniture
T-type 110
17mm
T-type 110/45°
17mm
T-type 110/90°
17mm
T-type 110
0mm
T-type 110
9mm
T-type 110
5mm
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.112
Glissando
for Concealed Hinges
Information
How many Glissandos per Door
Add-on hinge soft
closing solution
For doors with 2 hinges, mount Glissando on
the bottom hinge, or on the middle hinge for
doors with 3 hinges.
· Glissando TT
· Glissando TL
· Glissando TL 170
Recommended number per door and positioning
No. of hinges
No. of
Glissandos
No. of
Glissandos
Recommended number per door and positioning
T-type S-type, B-type
1-2 1-2 2-3 2-3
2
3
4
5
Glissando
1 1-2 2 2
2
3
4
5
Glissando
Mount a CR on the
hinged side of the cabinet
on the top or bottom.
· Glissando CR
Stand-alone soft closing
solution
Recommended number per door and positioning
972.0X19. > 350 380 330
1 23
1-2 2
3+
GlissandoGlissando
For full overlay
concealed hinges
Glissando CR
Stand-alone door
soft-closing system
Item number
White
Glissando CR
Mounting
100 Pcs Made of plastic
Adjustment of the
damping force
Technical details
Grey
Beige
Always mount Glissando CR on
the hinged side of the cabinet.
*Fixing screw included in a set
For additional information please contact our representative.
www.titusplus.com
Recommended number
per door and positioning
No. of hinges
Mounting details Fixing
Tool-less adjustment
Turn towards “+” to increase
or towards “-” to decrease
the damping force.
The functioning of Glissando CR
depends on the hinge’s closing force.
A trial mounting is always recommended.
2.113
Concealed Hinges Soft Close Damping Systems
How to Mount Glissando
Toolless mounting
· Glissando TT
· Glissando TT 170
· Glissando TL
· Glissando TL 170
· Glissando CR
Screw-on into the
cabinet corner
Titus Glissando soft closing devices
cannot be used with free-swinging door
hinges.
The toolless snap-on version for
reduced assembly time and flexibility of
application; Glissando TT and TL can
be mounted at any time after furniture
assembly so can be offered as a retrofit
option by the installer.
Simple toolless assembly:
Insert Glissando into the holes
on the hinge and press down
with hand.
Glissando CR is mounted into the
cabinet corner by using chipboard
screws 20mm long.
Glissando dampers’ discreet
design enhances the look of the door
and occupies minimal space in the
cabinet interior.
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.114
Glissando
for Concealed Hinges
Information
How to Adjust Damping
Add-on hinge soft
closing solution
· Glissando TT
· Glissando TL
· Glissando TL 170
· Glissando CR
Stand-alone soft closing
solution
Glissando features quarter turn
adjustment to provide optimal
closing speed for all door dimensions
and weight.
The damping function can be
adjusted to fit different door weights
which enables:
· Perfect door functioning
· Use of the same type of Glissando
for various doors
Adjustable damping zone Turn towards ‘+’ to increase and
‘-’ to decrease the damping
Turn towards '+' to increase
or towards '-' to decrease
the damping.
2.115
Concealed Hinges Soft Close Damping Systems
Titus Hydraulic Damper
Efficient modular
design
Wide operating scope
Reliable damping and
closing at any speed
Simple toolless assembly:
Insert Glissando into the holes
on the hinge and press down
with hand.
· High coefficient γ of Titus damper
assures efficient damping at any
closing speed
· Damping force can be easily adapted
to customer needs
Higher coefficient γ means reliable
damping at high speed and ensures
that the system will reach its final
position even at very slow speed.
Stroke
Damping
force
Flat characteristic of the curve illustrates
the damping force during the soft closing
action at defined speed.
Automated
control of
components
Precision
damper filling
100%
inspection of
force and stroke
Scrap rejection Sealing
Components
manufacture
Stroke
Flat characteristic of the curve illustrates
the damping force during the soft closing
action at defined speed.
Automated
control of
components
Precision
damper filling
100%
inspection of
force and stroke
Sealing
FH - damping force at slam speed (12 mm/s)
FL - damping force at slow speed (1 mm/s)
FH FL
Deviation from nominal force
18%
-18%
-7%
7%
Stroke
Damping
force
Higher coe cient means reliable
damping at high speed and ensures that
the system will reach its final position even
at very slow speed.
Flat characteristic of the curve illustrates
the damping force during the soft closing
action at defined speed.
Stroke
Lama damper
Damping
force
7
6
3
FH
FL
γ=
Glissando damper
Industry average
Nominal value
Industry range
FH - damping force at slam speed (12 mm/s)
FL - damping force at slow speed (1 mm/s)
FH γ= FL
Deviation from nominal force
Stroke
Higher coeffcient means reliable
damping at high speed and ensures that
the system will reach its fflnal position even
at very slow speed.
Flat characteristic of the curve illustrates
the damping force during the soft closing
action at defflned speed.
Stroke
Glissando
Glissando damper
Industry average
Industry range
FH - damping force at slam speed (12 mm/s)
FL - damping force at slow speed (1 mm/s)
FH FL
Deviation from nominal force
Stroke
Higher coe cient γ means reliable
damping at high speed and ensures that
the system will reach its final position even
at very slow speed.
Flat characteristic of the curve illustrates
the damping force during the soft closing
action at defined speed.
Stroke
Glissando
Glissando damper
Industry average
Industry range
γ
3
6
7
γ
Industry range
Titus damper
FL
γ = FH
FH – damping force at slam speed (12mm/s)
FL – damping force at slow speed (1mm/s)
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.116
Glissando Soft
Closing Systems
for Hinges
1 2 3
Toolless mounting
· Reduced assembly time
· Flexible usage allows a retrofit
installation option
Adjustable damping
· Consistent performance across a
broad range of furniture doors of
different dimensions and weights
‘ConfidentClose’
1) Fast closing
2) Late start of deceleration action
3) Quiet landing with ‘SoftTouch’
2.117
Concealed Hinges Soft Close Damping Systems
Glissando Soft
Closing Systems
for Hinges
Easy toolless adjstment
· Intuitive adjustment procedure
· Controllable motion
‘Titus Damper Inside’
· Titus proprietary multi-purpose damping
technology
· Reliable and consistent damping
‘One-for-all’
· One item fits multiple applications
· Same item can be used on all crankings
and angled hinges
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.118
Glissando TT
Add-on Hinge Soft
Closing Solution
Item number
Glissando TT Snap-on
· T-type 110
110° 729.0K71.054.00
For 110° hinges
110°
Made of steel and plastic
Technical details
Hinge opening angle
2.119
Concealed Hinges Soft Close Damping Systems
Item number
Glissando TT Snap-on
· T-type 110
110° 729.0K71.054.00
Mounting details
· Same item can be used on all crankings and
angled hinges
· Designed to fit the concealed hinge cup and
requires no extra space inside the cabinet
· Adjustable damping
· Toolless mounting
Turn towards ‘+’ to increase and
Adjustable damping zone ‘-’ to decrease the damping
Insert Glissando TT into
the holes on the hinge Press down
Toolless assembly
No additional drilling is required
Recommended number per
door and positioning
2
3
4
5
2 3 4 5 N
50
100
150
200
250
cm Glissando
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.120
Glissando TL
Add-on Hinge Soft
Closing Solution
Item number
Glissando TL Snap-on
· S-type Plus 110
· S-type 110
· B-type 110
110° 951.0X94.050
110° 951.0P59.050
For 110° hinges
110°
Made of steel and plastic
Hinge
opening angle
For the following
Technical details 28 cup types
Damping force
13 67.6
66.2
K 43.5
13
45N
35N
Legend of hinge cup symbols
Screw-on
ready
Machine
insertion
ready
Premounted
euro screws
Premounted
chipboard
screws
EasyFix
system
Premounted
expando
dowels
2.121
Concealed Hinges Soft Close Damping Systems
Item number
Glissando TL Snap-on
· S-type Plus 110
· S-type 110
· B-type 110
110° 951.0X94.050
110° 951.0P59.050
Mounting details
· Same item can be used on all crankings and
angled hinges
· Designed to fit the concealed hinge cup and
requires no extra space inside the cabinet
· Adjustable damping
· Toolless mounting
Turn towards ‘+’ to increase and
Adjustable damping zone ‘-’ to decrease the damping
Insert Glissando TL into
the holes on the hinge Press down
Toolless assembly
No additional drilling is required
Recommended number per
door and positioning
2
3
4
5
2 3 4 5 N
50
100
150
200
250
cm Glissando Legend of hinge cup symbols
Screw-on
ready
Machine
insertion
ready
Premounted
euro screws
Premounted
chipboard
screws
EasyFix
system
Premounted
expando
dowels
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.122
Glissando TL 170
Add-on Hinge Soft
Closing Solution
Item number
Glissando TL 170
snap-on
110° 951.0F15.650
For T-type 170, S-type 170 and B-type 170
Made of steel and plastic
Technical details
Hinge
opening angle
Legend of hinge cup symbols
Screw-on
ready
Machine
insertion
ready
Premounted
euro screws
Premounted
chipboard
screws
EasyFix
system
Premounted
expando
dowels
For the following
cup types
Box content
100 pcs soft closing mechanisms
100 pcs striking plates
Soft closing mechanism
Striking plate
41
88.5 24
52.5
12.4
K
2.123
Concealed Hinges Soft Close Damping Systems
Item number
Glissando TL 170
snap-on
110° 951.0F15.650
Mounting details
· Gentle and reliable soft closing on doors with
wider opening angle
· Fits perfectly 45/9.5mm, 48/6mm and
52/5.5mm hinge cups
· Furniture consumers’ preferred
‘ConfidentClose’ damping
· Toolless mounting Turn towards ‘+’ to increase and
‘-’ to decrease the damping
Recommended number per
door and positioning
2
3
4
5
2 3 4 5 N
50
100
150
200
250
cm Glissando Legend of hinge cup symbols
Screw-on
ready
Machine
insertion
ready
Premounted
euro screws
Premounted
chipboard
screws
EasyFix
system
Premounted
expando
dowels
Damping adjustment
Insert Glissando TL 170 into the
holes on the hinge cup Press down
Toolless mounting
Place the striking plate into
the hole on the hinge arm Press down
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.124
Glissando CR
Stand-alone Door Soft
Closing System
Item number
Glissando CR
for Full Overlay
hinges
110° 0mm 972.0X19 > 350 380* 360*
For full overlay and half overlay
concealed hinges
Made of plastic
Technical details
Hinge opening angle
Cranking
White
Grey
Beige
*Fixing screw included in a set
Nominal 11
(Adjustment: Nominal + 5mm)
2.125
Concealed Hinges Soft Close Damping Systems
Item number
Glissando CR
for Full Overlay
hinges
110° 0mm 972.0X19 > 350 380* 360*
Mounting details
· Intuitive ‘place and fix’ installation in the corner
of the cabinet
· Toolless damping adjustment
· One item for a wide range of doors
· Reliable performance
Turn towards ‘+’ to increase and
‘-’ to decrease the damping
Recommended number per
door and positioning
2
3
4
5
2 3 4 5 N
50
100
150
200
250
cm Glissando
Damping adjustment
16,5
Nominal 10
(Adjustment: Nominal + 5mm)
Nominal 11
(Adjustment: Nominal + 5mm)
16
Glissando CR9
27
27
Glissando CR
18
18
25
35
34
44
75°
75°
Mount Glissando CR on the
hinged side of the cabinet
Further explanations > go to http://www.youtube.com/watch?v=8-uWs_z2d0s
Further explanations > go to http://www.youtube.com/watch?v=8-uWs_z2d0s
One screw fixing
16,5
Nominal 10
(Adjustment: Nominal + 5mm)
Nominal 11
(Adjustment: Nominal + 5mm)
16
Glissando CR9
27
27
Glissando CR
18
18
25
35
34
44
75°
75°
Mount Glissando CR on the
hinged side of the cabinet One screw fixing
The functioning of Glissando CR
depends on the hinge’s closing force.
A trial mounting is always recommended.
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.126
Titusoft WD
Soft Closing System
for Wooden Doors
Item number
Titusoft WD 973.0X35 > 380
For wooden drawers
with roller runners
Made of plastic
Technical details
Grey
Set consists of:
· Titusoft mechanism
· Activator
Ø 3.2
Ø 3.2
Ø 6.5
40.5
214
192
192
6.5 9
10
78
18
53 20
9
24
6,5
Ø 3.5
Ø 3.7
Ø 3.7
Ø 3.2
Ø 3.2
Ø 6.5
40.5
214
192
192
6.5 9
10
78
18
53 20
9
24
6,5
Ø 3.5
Ø 3.7
Ø 3.7
Activator
Titusoft mechanism
2.127
Concealed Hinges Soft Close Damping Systems
Item number
Titusoft WD 973.0X35 > 380
Mounting details
· Works with most roller runner drawer slides
· Easy, intuitive mounting
· Smooth soft closing action independent
of drawer hardware
· Optimal closing speed
· Non-handed design
(kg)
20
(mm)
Capacity chart
Mount 1 or 2 Titusoft mechanisms
depending on drawer weight and width
Position the Titusoft mechanism
on the top of the drawer slide
Fix with 2 screws L=20mm
1.
2b
2a
3. 4.
4a
4b
3a
3b
1. Rest the activator against the drawer front Fix with 2 screws L=12mm
2. Align the vertical position of the activator
with the top of the Titusoft mechanism and
mark the screw locations
2.
A trial mounting is always recommended. Please contact Titus Tekform for further technical assistance.
Download supporting documentation from the Titus Tekform website titustekform.com.au
2.128
Titusoft MD
Soft Closing System
for Metal Box Drawers
Item number
Titusoft MD 973.0X39 > 380
For metal boxes
Made of plastic
Grey
Technical details
Set consists of:
· Titusoft mechanism
· Activator
· Mounting jig
Mounting jig
Titusoft mechanism
Activator
192
213
Ø6.5 40.5
40.5
3.2
9
Ø6.5
213
3.2
8
225
30 Ø4
Ø4
42.4
4
192
213
Ø6.5 40.5
40.5
3.2
9
Ø6.5
213
3.2
8
225
30 Ø4
Ø4
42.4
4
Retrofit mounting
2.129
Concealed Hinges Soft Close Damping Systems
Item number
Titusoft MD 973.0X39 > 380
Mounting details
· ‘One-for-all’ soft closing for single
skin metal boxes
· Allows for easy factory mounting
or retrofit application
· Intuitive positioning
· Preserve the lifetime of the drawer
(kg)
20
(mm)
Capacity chart
Mount 1 or 2 Titusoft mechanisms
depending on drawer weight and width
L
1
1
1 2 2
1 3
5
9
L
1
1
1 2 2
1 3
5
9
L
1
1
1 2 2
1 3
5
9
L
1
1
1 2 2
1 3
5
9
30
97.5
For retrofit mounting For factory mounting
103.5
46
46
58 130
8.8
18.5
Marked line Marked line
192
5
13.5
L
1
1
1 2 2
1 3
5
9
L
1
1
1 2 2
1 3
5
9
L
1
1
1 2 2
1 3
5
9
1.
4.
2. 3.
5.
Retrofit mounting
Factory mounting
A trial mounting is always recommended. Please contact Titus Tekform for further technical assistance.
Download supporting documentation from the Titus Tekform website titustekform.com.au
Furniture
Fittings
3.2
3.2
Overhead Solutions
Page
SkyRise Soft Close Opening System 3.4
AeroPlus Opening System 3.6
Lift-up Mechanisms 3.8
Titus Connectors
Information 3.11
System 3 Fittings for face and edge boring 3.13
System 4 Fittings for face boring only 3.15
System 5 Cams and dowels 3.18
System 6 Quickfit-Expando connectors 3.38
System 7 High strength connectors 3.47
Furniture Fittings
Product Guide
Cabinet and Furniture Legs
Titus Adjustable Cabinet Legs 3.51
Decorative Furniture Legs 3.55
3.3
3.3
Fastmount® Panel Mounting
Information 3.58
Standard Profile Range 3.59
Low Profile Range 3.65
Very Low Profile Range 3.69
Metal Profile Range 3.72
Panel Control Range 3.75
Textile Range 3.76
Installation Tools 3.78
SuperGroove® Adhesive 3.79
3.4
Weight
capacity
Cabinet
height (mm)
Cabinet width
(mm) Item number
SkyRise Mini Kit for Doors 5 - 8 kg 201 - 500 300 - 1000 606.8K03.112.040
• Minimum cabinet depth: 200mm
Kit includes:
• Symmetrical and dampened mechanisms (2 pcs)
• Linear mounting plates for the door fixing (2 pcs)
• Ø4 x 15mm screws (6 pcs)
• Ø4 x 35mm screws (8 pcs)
• Covers: right and left (2 pcs)
SkyRise Maxi Kit for Doors 5 - 12 kg 300 - 600 300 - 1800 606.8K03.112.060
• Minimum cabinet depth: 261mm
Kit includes:
• Symmetrical and dampened mechanisms (2 pcs)
• Linear mounting plates for the door fixing (2 pcs)
• Ø4 x 15mm screws (6 pcs)
• Ø4 x 35mm screws (8 pcs)
• Covers: right and left (2 pcs)
• Easy assembly with click-on door fixing
• No hinges or stabilisation bars required
• SlowMotion technology for controlled and silent
closing
• Compact, non-invasive slim housing
• 3-Way vertical and horizontal adjustment with
door weight adjustment
Overhead Solutions
SkyRise Opening System
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.5
Overhead Solutions
Overhead Solutions
SkyRise Opening System
Adjustments
Adjust clockwise if the door
appears to drop downwards after
installing.
Adjust anticlockwise if the door
appears to up-spring after
installing.
The force-saving device
can be quickly adjusted
by using an electric
screw driver.
Vertical and horizontal adjustment can be achieved
by turning the corresponding adjustment screws
Door weight adjustment
3.6
Item number
606.8L09.900.110
Note: Hinge 110° not included
• Upwards operation
• Symmetrical mechanism for smart assembly
• Adjustable for doors up to 20kg
• Perfect stay in all positions
• 32mm standard cabinet drilling
• Combine with soft close hinges for smooth
operation
Overhead Solutions
AeroPlus Opening System
Kit includes:
• 1 AeroPlus joint
• 1 cover cap
• 1 bracket for cabinet
• 1 bracket for wooden door
• Assembly instructions
37
175
32 180
90 °
18
32
F1
F2
F3
F4
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.7
Overhead Solutions
Overhead Solutions
AeroPlus Opening System
Application
Adjustments
Door Adjustment (kgs)
Door
Height
F2
4-5-6
F1
1-2-3
F3
7-8-9
F4
10-11-12
300 3 - 5 5 - 10 9 - 15.5 11 - 20
400 2 - 4 3.5 - 7.5 6.5 - 11.5 8.5 - 15
500 1.5 - 3 3 - 6 5.5 - 9.5 7 - 12
600 1.5 - 2.5 2.5 - 5 4.5 - 7.5 6 - 10
32
75°
200
205
37
32
110°
135
180
37
175
37
32 180
90°
18
32
Technical specifi cations:
• Upwards operation
• Symmetrical mechanism for a smart assembly
• Adjustable for doors up to 20kg weight
• Perfect stay in every position
• 32mm standard cabinet drilling
• Combined with SlowMotion hinges, it confers a perfect movement
to the door
Code Description Packing
59.0VPL05.00.00000 Kit AeroPlus 15 kits
Packed in a kit, consists of:
• 1 joint Aeroplus
• 1 cover cap
• 1 bracket for cabinet
• 1 bracket for wooden door
• 4 selftapping screws Ø4x16 mm
• 1 SW10 key
• Assembly instructions
Door weight adjustment (kg)
Door
height
F1 F2 F3 F4
1-2-3 4-5-6 7-8-9 10-11-12
300 3~5 5~10 9~15,5 11~20
400 2~4 3,5~7,5 6,5~11,5 8,5~15
500 1,5~3 3~6 5,5~9,5 7~12
600 1,5~2,5 2,5-5 4,5~7,5 6~10
F1
F2
F3
F4
FORMENTI & GIOVENZANA S.p.A.
Via Concordia, 16
20837 Veduggio con Colzano (MB) - ITALY
Tel. +39 0362 947.1 r.a. - Fax +39 0362 998788
[email protected] - www.fgv.it EN 04.2017
AeroPlus
Values given in mm
32
75°
200
205
37
32
110°
135
180
37
175
37
32 180
90°
18
32
Technical specifi cations:
• Upwards operation
• Symmetrical mechanism for a smart assembly
• Adjustable for doors up to 20kg weight
• Perfect stay in every position
• 32mm standard cabinet drilling
• Combined with SlowMotion hinges, it confers a perfect movement
to the door
Code Description Packing
59.0VPL05.00.00000 Kit AeroPlus 15 kits
Packed in a kit, consists of:
• 1 joint Aeroplus
• 1 cover cap
• 1 bracket for cabinet
• 1 bracket for wooden door
• 4 selftapping screws Ø4x16 mm
• 1 SW10 key
• Assembly instructions
Door weight adjustment (kg)
Door
height
F1 F2 F3 F4
1-2-3 4-5-6 7-8-9 10-11-12
300 3~5 5~10 9~15,5 11~20
400 2~4 3,5~7,5 6,5~11,5 8,5~15
500 1,5~3 3~6 5,5~9,5 7~12
600 1,5~2,5 2,5-5 4,5~7,5 6~10
F1
F2
F3
F4
FORMENTI & GIOVENZANA S.p.A.
Via Concordia, 16
20837 Veduggio con Colzano (MB) - ITALY
Tel. +39 0362 947.1 r.a. - Fax +39 0362 998788
[email protected] - www.fgv.it EN 04.2017
AeroPlus
Values given in mm32
75°
200
205
37
32
110°
135
180
37
175
37
32 180
90°
18
32
Technical specifi cations:
• Upwards operation
• Symmetrical mechanism for a smart assembly
• Adjustable for doors up to 20kg weight
• Perfect stay in every position
• 32mm standard cabinet drilling
• Combined with SlowMotion hinges, it confers a perfect movement
to the door
Code Description Packing
59.0VPL05.00.00000 Kit AeroPlus 15 kits
Packed in a kit, consists of:
• 1 joint Aeroplus
• 1 cover cap
• 1 bracket for cabinet
• 1 bracket for wooden door
• 4 selftapping screws Ø4x16 mm
• 1 SW10 key
• Assembly instructions
Door weight adjustment (kg)
Door
height
F1 F2 F3 F4
1-2-3 4-5-6 7-8-9 10-11-12
300 3~5 5~10 9~15,5 11~20
400 2~4 3,5~7,5 6,5~11,5 8,5~15
500 1,5~3 3~6 5,5~9,5 7~12
600 1,5~2,5 2,5-5 4,5~7,5 6~10
F1
F2
F3
F4
FORMENTI & GIOVENZANA S.p.A.
Via Concordia, 16
20837 Veduggio con Colzano (MB) - ITALY
Tel. +39 0362 947.1 r.a. - Fax +39 0362 998788
[email protected] - www.fgv.it EN 04.2017
AeroPlus
Values given in mm
3.8
Overhead Solutions
Lift-up Mechanisms
Dimensions (mm) Item number
Silver
White
Chrome
Gas Strut Minimum internal cabinet height
264mm 606.8L03.300 > 287
• Gas Strut suitable for weights up to 12kg
Lift-up Stay 606.8L03.287 > 000
• Lift-up overhead stay with easy operation and variable opening angle of 75°.
No concealed hinges required on top panel. Spring strength of 180N
Flap Stay with Catch 225 605.8A20.225 > 001
Klok XL Flap Stay Minimum door height 300mm
Maximum door height 700mm
Maximum door opening angle 105°
606.8L03.001 > 000
• Klok XL Flap Stay complete with carcase bracket and door bracket for wood
Details on how many flap stays are required depending on door height, weight and
desired opening angle > see page 3.9
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.9
Overhead Solutions
Overhead Solutions
Klok XL Flap Stay
To keep the door opening in any position, the number of Klok XL flap stays to use must be calculated according to
the door weight, the door height and the maximum opening angle desired.
Door weight and
maximum opening angle
Door height (mm)
300 350 400 450 500 550 600 650 700
2kg
75° 1 1 1 1 1 1 1 1 1
90° 1 1 1 1 1 1 1 2 2
105° 1 1 1 1 1 2 2 2 2
3kg
75° 1 1 1 1 1 1 1 1 1
90° 1 1 1 1 1 1 1 2 2
105° 1 1 1 1 1 2 2 2 2
4kg
75° 1 1 1 1 1 1 1 1 1
90° 1 1 1 1 1 1 1 2 2
105° 1 1 1 1 1 2 2 2 2
5kg
75° 1 1 1 1 1 1 1 1 1
90° 1 1 1 1 1 1 1 2 2
105° 1 1 1 1 2 2 2 2 2
6kg
75° 1 1 1 1 1 1 1 1 1
90° 1 1 1 1 1 2 2 2 2
105° 1 1 1 2 2 2 2 2 2
7kg
75° 1 1 1 1 1 1 1 2 2
90° 1 1 1 2 2 2 2 2 2
105° 1 2 2 2 2 2 2 2 /
8kg
75° 1 1 1 1 1 2 2 2 2
90° 1 1 2 2 2 2 2 2 2
105° 1 2 2 2 2 2 2 / /
9kg
75° 1 1 1 1 2 2 2 2 2
90° 1 2 2 2 2 2 2 2 /
105° 2 2 2 2 2 / / / /
10kg
75° 1 1 1 2 2 2 2 2 2
90° 1 2 2 2 2 2 2 / /
105° 2 2 2 2 / / / / /
11kg
75° 1 1 2 2 2 2 2 2 2
90° 2 2 2 2 2 / / / /
105° 2 2 2 / / / / / /
12kg
75° 1 1 2 2 2 2 2 2 2
90° 2 2 2 2 2 / / / /
105° 2 2 2 / / / / / /
Choosing the Correct Quantity of Klok XL Flap Stays
3.10
Titus
Connectors
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.11
Connectors
Why Choose Titus Connectors
Titus connectors add value
to furniture and to furniture
manufacturing
Titus connectors improve the quality
of furniture and lower the cost
of manufacturing and assembly
while ensuring a high degree
of customer satisfaction.
The most advanced
range of connectors
available on the market
Precise and efficient product design.
The broadest possible range of
drilling tolerances ensures reliable
assembly and consistently strong joints.
Klix locking feature, the engagement
of interlocking teeth on cam and dowel,
to prevent joint loosening in service or
transit.
Expanding function provides degrees
of variation in out-of-tolerance drillings
ensuring stronger joints and improved
quality of furniture.
Twinstart thread for faster and more
stable insertion.
Depth stop collar prevents
over-insertion.
Firm tightening for greater confidence
in use.
Cam locks at 230° ensuring a smooth
tightening action and greater dowel
pull-up.
Quickfit for hand dowel insertion.
Quickfit TL2, TL4 with the built-in self
adjustment feature is the only available
dowel that allows for pre-insertion.
Quickloc one-piece fitting for faster
assembly with integrated expanding cam
and dowel.
Zinc+steel dowel for optimal strength
and performance.
Precise dowel manufacturing
high precision of zinc and strength of steel
assures 100% dimensional accuracy.
Easy and quick consumer
friendly self-assembly
of furniture
Self-assembly furniture offers
consumers good value and instant
availability of products.
With the aim of providing consumers
with simpler instructions, fewer parts
and an easier assembly process,
Titus has significantly reduced and
simplified the number of fittings
traditionally required in furniture
production.
Titus connectors provide consumers
with easy assembly, and furniture
producers with increased productivity
through:
• Reduced number of assembly parts
• Easy assembly instructions
• Security of packed parts during transit
Connectors
3.12
Easy and Quick Furniture Assembly
CAF formula CAF = Consumer Assembly Friendliness
Titus CAF formula provides a comparative measure for customer satisfaction. By
using it, manufacturers are able to evaluate their products internally or against
those of their competitors. While offering consumers easier and faster assembly,
there are obvious advantages also for furniture manufacturers – buying, counting,
bagging and stocking of fittings can be greatly reduced.
How does it work? Comparative CAF scores to assemble a
hand held demonstrator:
Connectors
Information
T A N CAF
Connecting screw (traditional assembly) 4 38 3 126
Cam & dowel with single start thread 6 21 4 108
Cam & dowel with twinstart thread 6 15 4 84
Cam & TL2 dowel (self-assembly) 6 7 4 52
Cam & TL2 dowel (factory pre-inserted) 2 3 2 10
Quickloc 2 3 1 5
Fully assembled demonstrator 1 0 1 1
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.13
Connectors
System Features
Titus System 3 is a two component rigid
face and edge drilled fastening with half
turn to fasten. System 3 offers almost
full concealment and wide tolerances in
use.
• Automatic or in-factory placement
• Pre-located pin ensures ease of
assembly
• Less than one turn of a screwdriver to
fasten
• Shelf edge installation of pin means
maximum shelf cut size tolerance
• Can be used on 12mm shelf panels
• No loose parts for maximum
convenience in RTA
• Drawer front fixing, cabinet
construction
System 3
Fittings for Face and
Edge Boring
3.14
X-Y+7
Ø25 x D
3118
3121
3168
3180
12
10
(Y=9.5 MAX) (Y=9.5 MAX) (Y=9.5 MAX)
Y
X
POZIDRIVE
Ø5 x 30
X-Y+7
Y
X
ØD2 x C
X-Y+7
Y
X
H
X-Y+7
Ø25 x D
3118
3121
3168
3180
12
10
(Y=9.5 MAX) (Y=9.5 MAX) (Y=9.5 MAX)
Y
X
POZIDRIVE
Ø5 x 30
X-Y+7
Y
X
ØD2 x C
X-Y+7
Y
X
H
X-Y+7
Ø25 x D
3118
3121
3168
3180
12
10
(Y=9.5 MAX) (Y=9.5 MAX) (Y=9.5 MAX)
Y
X
POZIDRIVE
Ø5 x 30
X-Y+7
Y
X
ØD2 x C
X-Y+7
Y
X
H
System 3
Fittings for Face
and Edge Boring
Concealed Housing
• One turn locking system reduces assembly time, both in
the factory and home
• Pre-assembly feature for consumer convenience
• Choice of dowels to suit drilling
• Hi-Lo screw feature for faster insertion
X, Y - depends on board thickness
X, Y - depends on board thickness
X, Y - depends on board thickness
C D D2
Technical and mounting details
Drilling length for
dowel (mm)
Drilling depth (mm)
Drilling diameter
for dowel thread
(mm)
Item number
Black
Zinc plated
Yellow passivate
White
Housing Assembly 12.5 03118 > 835 877
11 03121 > 835*
Made of plastic and zinc
• Other colours on request
Screw Dowel Ø5 03168 > 883
Made of steel
Screw Dowel Ø3 30 3.75 03181 > 881*
9 3 03180 > 881*
Made of steel
Cover Cap 03150 > 835 877
Made of plastic
• Other colours on request
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.15
Connectors
System Features
Cost effective one-piece fittings with
face-boring benefits:
• Flush and block components
• Face-boring only
• Good tolerances
• One-piece connectors
• Angledrive versions fasten with
maximum driving power and flexibility
• Quickloc™ versions need only one
turn to tighten for fast assembly
• Foolproof consumer home insertion
Quickloc™
One-piece Connector
The integrated housing and dowel make
Quickloc™ the most user-friendly and
tolerant product available.
• High degree of drilling tolerance
• Push-in design
• Toolless insertion
• Integrated expanding housing and
dowel provide consistently stronger
joints
Quickloc™ Assembly 1. Press Quickloc into the face board 2. Assemble the panels
3. Tighten in less than one turn
System 4
Fittings for
Face Boring Only
3.16
System 4
Quickloc™
One-piece Expanding
Connector
• An innovative, one-piece connector, capable of hand
insertion
• Is highly tolerant and tightens in less than one turn
• Is a face-bored product
• Offers a high degree of drilling tolerance and is the
only connector of its type to provide pull-up of cabinet
panels when tightened
Technical and mounting details Item number
Dark brown
Black
White
Quickloc Ø20 Flanged 06803 > 831* 835* 877*
Made of plastic and zinc
Quickloc Ø20 Flush 06806 > 831 835 877
Made of plastic and zinc
• Other colours on request
Quickloc Ø25 Flanged 06813 > 831* 835* 877*
Made of plastic and zinc
Quickloc Ø25 Flush 06839 > 831* 835* 877
Made of plastic and zinc
Ø10
11
5
12
6813
Ø25
13
Ø10
10.5 1
A
Ø10
11 5
12
6813
Ø25
13
Ø10
10.5 1
A
6806
Ø19.6
6803
22
11.5 Ø8
12 6.5
10
9.5
Ø20
Ø8
9.5 Ø8
9.5
4.5 10
Ø20
Ø8
10
6806
Ø19.6
6803
22
11.5 Ø8
12 6.5
10
9.5
Ø20
Ø8
9.5 Ø8
9.5
4.5 10
Ø20
Ø8
10
6806
Ø19.6
6803
22
11.5 Ø8
12 6.5
10
9.5
Ø20
Ø8
9.5 Ø8
9.5
4.5 10
Ø20
Ø8
10
6806
Ø19.6
6803
22
11.5 Ø8
12 6.5
10
9.5
Ø20
Ø8
9.5 Ø8
9.5
4.5 10
Ø20
Ø8
10
13
12
13
6.5
Ø10
Ø25
6839
12.2 Ø10 A
1
13
12
13
6.5 Ø10
Ø25
6839
12.2 Ø10 A
1
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.17
Connectors
D
Technical and mounting details
Drilling depth (mm)
Item number
Dark brown
Black
Silver
White
Minibloc Ø10 11 02107 > 831* 835* 861* 877*
11 ^02120 > 831* 835* 861* 877*
Made of plastic and zinc
^Assembly with screw
• Other colours on request
Minibloc Ø8 11 02141 > 835* 861* 877*
Made of plastic and zinc
• Other colours on request
Twinbloc Ø10 11 02130 > 835* 861* 877*
11 ^02139 > 835* 877*
Made of plastic and zinc
^Assembly with screw
• Other colours on request
Ø5 x 10.5
Ø10 x D
6
11
Ø8 x 13
Ø8 x D
6
11
Ø5 x 10.5
Ø10 x 11
6
11
Ø10 x D
Ø10 x D
6
11
Ø5 x 13
Ø8 x D
6
11
Ø5 x 10.5
Ø10 x 11
6
11
Ø10 x D
Ø10 x D
6
11
Ø5 x 13
Ø8 x D
6
11
Ø5 x 10.5
Ø10 x 11
6
11
0021 unthumped
0022 thumped
2130
Ø10 Ø6
14.5
2139
2141
2107 14
14
32
17
16 17
2144
2120
ASSEMBLY
16 17
278.4129
9.5
21.5 19
12
10
6 Ø3
15.5
Ø10
13
10.5
Ø10.5
10.5
10.5
Ø8.2
Ø10.5
0021 unthumped
0022 thumped
2130
Ø10 Ø6
14.5
2139
2141
2107 14
14
32
17
16 17
2144
2120
ASSEMBLY
16 17
278.4129
9.5
21.5 19
12
10
6 Ø3
15.5
Ø10
13
10.5
Ø10.5
10.5
10.5
Ø8.2
Ø10.5
0021 unthumped
0022 thumped
2130
Ø10 Ø6
14.5
2139
2141
2107 14
14
32
17
16 17
2144
2120
ASSEMBLY
16 17
278.4129
9.5
21.5 19
12
10
6 Ø3
15.5
Ø10
13
10.5
Ø10.5
10.5
10.5
Ø8.2
Ø10.5
0021 unthumped
0022 thumped
2130
Ø10 Ø6
14.5
2139
2141
2107 14
14
32
17
16 17
2144
2120
ASSEMBLY
16 17
278.4129
9.5
21.5 19
12
10
6 Ø3
15.5
Ø10
13
10.5
Ø10.5
10.5
10.5
Ø8.2
Ø10.5
0021 unthumped
0022 thumped
2130
Ø10 Ø6
14.5
2139
2141
2107 14
14
32
17
16 17
2144
2120
ASSEMBLY
16 17
278.4129
9.5
21.5 19
12
10
6 Ø3
15.5
Ø10
13
10.5
Ø10.5
10.5
10.5
Ø8.2
Ø10.5
0021 unthumped
0022 thumped
2130
Ø10 Ø6
14.5
2139
2141
2107 14
14
32
17
16 17
2144
2120
ASSEMBLY
16 17
278.4129
9.5
21.5 19
12
10
6 Ø3
15.5
Ø10
13
10.5
Ø10.5
10.5
10.5
Ø8.2
Ø10.5
0021 unthumped
0022 thumped
2130
Ø10 Ø6
14.5
2139
2141
2107 14
14
32
17
16 17
2144
2120
ASSEMBLY
16 17
278.4129
9.5
21.5 19
12
10
6 Ø3
15.5
Ø10
13
10.5
Ø10.5
10.5
10.5
Ø8.2
Ø10.5
0021 unthumped
0022 thumped
2130
Ø10 Ø6
14.5
2139
2141
2107 14
14
32
17
16 17
2144
2120
ASSEMBLY
16 17
278.4129
9.5
21.5 19
12
10
6 Ø3
15.5
Ø10
13
10.5
Ø10.5
10.5
10.5
Ø8.2
Ø10.5
System 4
Fittings for
Face Boring Only
Minibloc™ / Twinbloc™
• One-piece connector range
• Face drilling only required
• Easy to use, foolproof home insertion
• Angledrive screw tolerates good levels of inaccurate
drilling, increasing consumer confidence
3.18
System Features
The most advanced cam
and dowel range
Titus System 5 is a comprehensive
range of cam and dowel connecting
fittings with ‘Klix’ and Quickfit features
for all cabinet applications:
panel-to-panel, panel-to-hollow profile
and back-to-back
Dowels
• Quickfit TL5, 'Full metal jacket'
Toolless insertion technology for
Ø5mm dowel holes
• Quickfit TL2, TL4, TL5 dowels
A unique solution for factory
pre-insertion, high level of drilling
tolerances
• Quickfit dowels
Quick hand insertion, easy assembly
• Diecast dowels (zinc)
Precise manufacturing, optimal shape
and design
• Turned dowels (steel)
‘Traditional’ design, smooth surface
and best strength performance
• Combi dowels (zinc and steel)
High precision of zinc, strength of
steel, 100% dimensional accuracy and
optimal performance
Titus ‘Klix’™ Titus ‘Klix’ locking system ensures the
engagement of the interlocking teeth
on cam and dowel, providing:
• Vibration-proof joint
• Rigid construction that will not
loosen in service or transit
Dowel insertion
time comparison
2 o'clock lock
smooth closing
Linear cam profile assures smooth,
firm tightening action and greater
pull-up. The cam always locks at 2
o'clock lock (230°), enabling greater
consumer confidence in use while
improving furniture quality.
System 5
Cams and Dowels
Quickfit dowel
1
Second
Single start thread
Standard dowel
7
Seconds
Twin start thread
Combi dowel
4
Seconds
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.19
Connectors
Drilling
tolerances
Optimal performance and perfect joint
even with inaccurate drillings.
Zinc/Combi dowel
Quickfit TL5 dowel
Quickfit TL2 dowel
Quickfit TL4 dowel
Dowels for factory insertion Quickfit TL5, Quickfit TL2 and Quickfit
TL4 are the only available dowels
that allow for factory pre-insertion,
enabling:
• Easier packing
• Less damages in handling
• Perfect for the RTA market
System 5
Cams and Dowels
Typical ETHC (EDGE TO HOLE CENTRE)
measurements
0
2
4
6
8
10
12
14
16
18
20
ETHC
Number of Occurences Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
+ / - 0.5 mm
measurements
Number of Occurences
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL5
2
4
6
8
10
12
14
16
18
20
measurements
Number of Occurences
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL4
2
4
6
8
10
12
14
16
18
20
+ / - 1 mm + / - 1 mm
Typical ETHC (EDGE TO HOLE CENTRE)
measurements
0
2
4
6
8
10
12
14
16
18
20
ETHC
Number of Occurences Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
+ / - 0.5 mm
measurements
Number of Occurences
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL5
2
4
6
8
10
12
14
16
18
20
measurements
Number of Occurences
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL4
2
4
6
8
10
12
14
16
18
20
+ / - 1 mm + / - 1 mm
Typical ETHC (EDGE TO HOLE CENTRE)
measurements
0
2
4
6
8
10
12
14
16
18
20
ETHC
Number of Occurences Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
+ / - 0.5 mm
measurements
Number of Occurences
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL2/TL3
2
4
6
8
10
12
14
16
18
20
measurements
Number of Occurences
0
ETHC
Series1 0 0 3 0 5 6 4 14 4 9 10 18 15 9 11 16 7 11 8 0 3
23,0 23,1 23,2 23,3 23,4 23,5 23,6 23,7 23,8 23,9 24,0 24,1 24,2 24,3 24,4 24,5 24,6 24,7 24,8 24,9 25,0
Quickfit TL4
2
4
6
8
10
12
14
16
18
20
+ / - 1 mm + / - 1 mm
Tolerance range
Intervallo di tolleranza
Tolerance range
Intervallo di tolleranza
Tolerance range
Intervallo di tolleranza
±1 mm
min.23(27/33)
ETHC
max.25(29/35)
ETHC
max.25
ETHC
min.23
ETHC max.24.5(34.5)
ETHC
min.23.5 (33.5)
ETHC
Tolerance range
Intervallo di tolleranza
Tolerance range
Intervallo di tolleranza
Tolerance range
Intervallo di tolleranza
±1 mm
min.23(27/33)
ETHC
max.25(29/35)
ETHC
max.25
ETHC
min.23
ETHC max.24.5(34.5)
ETHC
min.23.5 (33.5)
ETHC
Tolerance range
Intervallo di tolleranza
Tolerance range
Intervallo di tolleranza
Tolerance range
Intervallo di tolleranza
±1 mm
min.23(27/33)
ETHC
max.25(29/35)
ETHC
max.25
ETHC
min.23
ETHC max.24.5(34.5)
ETHC
min.23.5 (33.5)
ETHC
+/-0.5mm
+/-1mm
+/-1mm
+/-1mm
ETHC=Edge To Hole Center
Tolerance range
Tolerance range
Tolerance range
3.20
Cam5000
Universal cam New Cam5000 works with all Titus parallel
neck dowels enabling simple stock
management and greater confidence in use.
Highly resistant central shape Shape of the cam body is redesigned to
prevent the cam toroidal deformation or
breakage in panel while tightening. The
Cam5000 high resistance enables a strong
and reliable joint.
Linear cam profile Linear cam profile ensures:
· Smooth tightening action
· Greater dowel pull-up
Optimised cam profile Optimised cam profile ensures a smooth and
tight joint with no gap between panels.
2 o'clock lock The cam always locks at 2 o'clock lock (230°),
enabling greater consumer confidence in use
while improving furniture quality.
Cam retaining pips Cam retaining pips assures:
· The cam is held in position prior to assembly
· Secure cam positioning during transport and
handling
· Accurate factory insertion
System 5
Cams and Dowels
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.21
Connectors
Zinc+steel Combi Dowels
Zinc+steel technology
for optimal strength and
performance
The Combi dowel combines steel and
a small amount of zinc to ensure high
precision and dimensional accuracy,
essential to provide furniture
manufacturers with the broadest
possible range of drilling tolerances.
The steel neck and head provide
better resistance to torsion and pullout enabling a high performance joint.
Zinc body:
Positive stop collar ensures correct
insertion depth.
Twinstart for faster and more stable
insertion.
The toroidal dowel head form transfers
the forces between cam and dowel
more effectively resulting in a small cam
bursting force.
100% dimensional accuracy
assured.
System 5
Cams and Dowels
Toroidal head form
Zinc body
Twinstart thread
Steel neck and head
Positive stop collar
100% accurate
small bursting angle
Cam
Dowel
3.22
Quickfit Connectors
It is the fastest assembly system on
the market. The Quickfit™ dowel
may be inserted by hand, using only
finger pressure. This eliminates the
labour intensive process of screwin assembly and the potential panel
damage.
The Quickfit™ range of dowels has
been extended to provide a complete
family of fittings available in diameters
of 5mm, 8mm and 10mm and lengths
of 24mm and 34mm. These dowels
are compatible with the range of Titus
Ø15mm cams.
Assembly 1. Press the cam into face board 2. Insert the dowel into side panel
3. Assemble the panels 4. Tighten the cam to lock dowel
5. Assembled panels
System 5
Cams and Dowels
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.23
Connectors
Quickfit TL Connectors
Quickfit-TL™ dowel offers furniture
manufacturers a fast assembly system
providing high drilling tolerances.
It has a built-in self-adjustment
feature, which enables common
drilling inaccuracies to be overcome.
For the self-assembly furniture
consumer, Titus Quickfit-TL™ is the
most consumer friendly fitting on the
market. Apart from the benefit of fully
tightened joints and easy locking into the
same position, Quickfit-TL™ provides
an exceptionally smooth action when
tightened, requiring very little effort.
Drilling tolerances Marginal inconsistencies of drilling
and the problems associated with the
natural movement of wood panels, no
longer present problems.
Quickfit-TL™ provides a tolerance of
+1/-1mm on drilling operation while
ensuring that the final result is a
perfectly precise and aligned joint.
No other assembly fittings system can
offer such tolerances and still maintain a
perfect joint.
Assembly 1. Press the cam into face board
2a. Either push dowel into
edge hole or...
2b. Insert the dowel into side panel
3. Assemble the panels 4. Tighten cam to lock dowel
System 5
Cams and Dowels
3.24
Quickfit TL5
‘Full Metal Jacket’ Quickfit TL5 with expanding steel
sleeve is the new generation of
Titus Quickfit TL dowels. It expands
the Titus Quickfit toolless insertion
technology to widely used Ø5mm
dowel holes.
Toolless insertion for Ø5mm
dowel holes
Unique to the market:
· Easy to push in
· Works without wooden dowels
Expanding steel sleeve Expanding steel sleeve assures high
resistance to torsion and pull-out.
High drilling tolerances Extended dowel head form works as
a positive stop against the cam and
provides tolerances of +/-1mm on
drilling operation.
System 5
Cams and Dowels
Ø5
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.25
Connectors
Shape of dowel sleeve · Acts as a positive stop when face inserted
· Ensures correct insertion depth
50% less time to assemble the
cabinet with factory insertion
Quickfit TL5 dowel is inserted into the panel
by simply pushing the head of the dowel into
the edge hole until it engages with the cam.
It remains in this position until the cam is
rotated to lock the boards together.
For maximum efficiency, the insertion process
can be automated using the Titus proprietary
Lama FastFit machine.
Functions with multiple wooden
materials
· Functions with multiple materials:
chipboard, MDF, solid wood
· Improved performance in low density
boards
· Assures strong and reliable joint
System 5
Cams and Dowels
3.26
A
Technical and mounting details
Drilling distance (mm)
Item number
Zinc corrosil
Quickfit TL5 24 009651 > 897
34 009652 > 897
To be used on Cam5000 only
Made of steel
System 5
Quickfit TL5
‘Full Metal Jacket’ • Toolless insertion technology for Ø5mm dowel holes
• To be used with Cam5000 only
• Drilling tolerances of +/-1mm when edge or face
inserted
• Expanding steel sleeve assures a strong joint, highly
resistant to pull-out
• Functions in multiple wooden materials (chipboard,
MDF, solid wood)
Ø5 x 12
34
Ø8
Ø5 x 12
A
Ø8
±1 mm
35 33
TL2
TL3 ETHC
max. 25 (35)
ETHC
ETHC
min. 23 (25) ETHC
Tolerance range
Edge to hole
tolerance
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.27
Connectors
ØD2 x 12
A
Ø8
Ø8 x 12
A
Ø8
±1 mm
max. 25 (29/35) min.23 (27/33)
TL2
TL3 ETHC
max. 25 (29/35)
ETHC
ETHC
min.23 (27/33) ETHC
Edge to hole
tolerance
D2=Ø5mm
D2=Ø8mm
A D2
Technical and mounting details
Drilling depth (mm)
Drilling diameter
for dowel thread (mm)
Item number
Black
Dark grey
Quickfit TL2 24 5 05453 > 880*
34 5 05503 > 880*
24 8 05441 > 880
28 8 05314 > 880*
34 8 05474 > 880
Made of plastic and zinc
Quickfit TL4 24 8 02144 > 835*
Made of plastic and zinc
System 5
Cams and Dowels
Quickfit-TL Dowels • Available in Ø5mm and Ø8mm for panel-to-panel
applications
• Suitable for use with all Ø15mm Cam2000, Cam3000
and Cam5000 products
• ‘Klix’ locking feature provides a strong, vibration proof
joint
• Highly tolerant in edge-inserted, TL4 also in faceinserted applications
±1 mm
max. 25 (29/35) min.23 (27/33)
TL2
TL3 ETHC
max. 25 (29/35)
ETHC
ETHC
min.23 (27/33) ETHC
ØD2 x 12
A
Ø8
Ø8 x 12
A
Ø8
Tolerance range
Tolerance range
Hole to hole tolerance
Edge to hole
tolerance
3.28
A
Technical and mounting details
Drilling distance (mm)
Item number
Black
Quickfit P2F 24 05414 > 835*
Made of plastic and zinc
System 5
Cams and Dowels
Quickfit-P2F Dowels • The only product to enable standard panel drilling,
connection of panel and hollow profile
• Available in Ø8mm for panel-to-hollow profile
applications
• Suitable for use with all Ø15mm Cam2000, Cam3000
and Cam5000 products
• ‘Klix’ locking feature provides a strong, vibration proof
joint
SYS05414/app
Ø7.8
10
Ø8
Ø8 x thru
1.0 - 1.5 approx.
Ø8
A
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.29
Connectors
• High quality zinc+steel dowel with greater resistance to
torsion and pull-out
• Suitable for use with all Ø12mm and Ø15mm Cam2000,
Cam3000 and Cam5000 products
• ‘Klix’ locking feature provides a strong, vibration proof
joint
• Twinstart thread for faster and reliable insertion
System 5
Cams and Dowels
Combi Dowel
A N X
Technical and mounting details
Drilling distance (mm)
Drilling depth (mm)
Thread length (mm)
Item number
Zinc
Combi Dowel Ø5mm 34 12 11 09435 > 885
28 10 9.5 09588 > 885
24 12 11 09443 > 885*
24 9 8.5 09583 > 885*
Made of steel and zinc
• Philips head option available on request
Combi Dowel M6 34 8 09592 > 885
34 10.5 09594 > 885
Made of steel and zinc
Ø5.8
X
M6
Ø3.5
Ø7-8
A
M6 insert to suit
Inserts
Made of zinc
> see page 3.48 Inserts
Made of plastic
> see page 3.49
Ø7-8 N
Ø5
A
Ø5.8
Ø6
X
Ø3.5
Ø3.5
3.30
System 5
Cams and Dowels
Zinc Dowel
Ø6 min.
Ø7
20 10
12
Ø5.8
Ø3.5 Ø4.7
9.6
Ø8.4
Ø5.8 Ø6
S 10.5
L
Ø3.5
Ø7-8
A
11
Ø5
Plastic inserts > see page 3.49
S L A
Technical and mounting details
Body length (mm)
Total length (mm)
Drilling distance (mm)
Item number
Zinc
Combi Dowel Ø5 Full Body PZ2 Head 20.6 34.5 24 09605 > 885
34 05534 > 885
Made of steel and zinc
Combi Dowel Ø7 Philips PH2 Head 20 09430 > 885*
Made of steel and zinc
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.31
Connectors
• Available in Ø7mm
• Suitable for use with all Ø12mm and Ø15mm Cam2000,
Cam3000 and Cam5000 products
• No circlip for increased tolerance
• Available in a variety of lengths to suit most panel-topanel applications
System 5
Cams and Dowels
Double-ended Dowel
S L A B
Technical and mounting details
Body length (mm)
Total length (mm)
Drilling distance (mm)
Panel thickness (mm)
Item number
Zinc plated
Dowel without Circlip 41 47.4 24 ^0 05929 > 883*
61 67.4 34 ^0 05757 > 883*
77 83.4 34 16 05858 > 883*
79 85.4 34 18 05859 > 883*
80 86.4 34 19 05753 > 883*
56 62.4 24 15 05592 > 883*
57 63.4 24 16 05857 > 883*
59 65.4 24 18 05380 > 883*
60 66.4 24 19 05778 > 883*
Made of steel
^B=0 > no panel required
Dowel with Circlip 77 83.4 34 16 05752 > 883*
79 85.4 34 18 05772 > 883*
80 86.4 34 19 05751 > 883*
57 63.4 24 16 05775 > 883*
60 66.4 24 19 05774 > 883*
Made of steel and zinc
Ø7-8
A
B
A
S
S
L
L
Ø3.6
Ø3.6
Ø6
Ø6
Ø7
Ø7
Ø12
Ø7-8
A
B
A
S
S
L
L
Ø3.6
Ø3.6
Ø6
Ø6
Ø7
Ø7
Ø12
3.32
• Suitable for applications requiring angled joints
• Suitable for use with all Ø12mm and Ø15mm Cam2000,
Cam3000 and Cam5000 products
• Adjustable angle from 90° to 180°
System 5
Cams and Dowels
Angled Dowels
Technical and mounting details Item number
Zinc plated
Angled Dowel 05860 > 883
Made of steel
Ø15
44
Ø7-8
44
44
B/2
B
x
20° 25° 30° 35° 40° 45° 50° 55° 60° 65° 67,5° 70° 75° 80° 85°
13 61.9 57.9 55.3 53.5 51.7 50.5 49.5 48.6 47.8 47 46.7 46.4 45.7 45.1 44.6
15 64.6 60.1 57 54.7 52.9 51.5 50.3 49.3 48.3 47.5 47.1 46.7 46 45.3 44.7
16 66 61.2 57.9 55.4 53.5 52 50.7 49.6 48.6 47.7 47.3 46.9 46.1 45.4 44.7
B 18 68.8 63.3 59.6 56.9 54.7 53 51.6 50.3 49.2 48.2 47.7 47.3 46.4 45.6 44.8
19 70.1 64.4 60.5 57.6 55.3 53.5 52 50.7 49.5 48.4 47.9 47.5 46.5 45.7 44.8
22 74.2 67.6 63.1 59.7 57.1 55 53.2 51.7 50.4 49.1 48.6 48 46.9 45.9 45
23 75.6 68.7 63.9 60.4 57.7 55.5 53.6 52.1 50.6 49.4 48.8 48.2 47.1 46 45 x
Distance x in mm
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.33
Connectors
• Improved central shape for highly resistant cam
• Suitable for use with steel Quickfit TL5 dowels and all
other parallel neck dowels
• ‘Klix’ locking feature provides a strong, vibration proof
joint
• Cam-retaining pips ensure that a cam is held in panel
position prior to assembly
System 5
Cams and Dowels
Ø15mm Cam5000
B D e h
Technical and mounting details
Panel thickness (mm)
Drilling depth (mm)
Drilling for dowel (mm)
Cam height (mm)
Item number
Zinc
Cam5000 Cross Drive PZ2 Drive
9537
9533 Ø15
e h
12/13 10.5 6 min. 9.9 009695 > 885.300
15/16 12.5 7.5-8 11.9 009690 > 885.300
Made of zinc
Cam5000 Hexagonal Drive Combined Drive with HEX 9537
9533 Ø15
e h
15/16 12.5 7.5-8 11.9 009699 > 885.300
18/19 14 9-9.5 13.2 009692 > 885.300
Made of zinc
• Use standard cover caps with pin=Ø4mm
• Black available on request
9537
9533 Ø15
e h
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
9537
9533
Ø15
e h
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
3.34
9537
9533
Ø15
e h
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
• Its optimised shape provides a more efficient cam
profile with smooth tightening action and greater dowel
pull-up
• Suitable for use with Combi dowels, forged steel
dowels, Quickfit dowels and Quickfit TL5 dowels
• ‘Klix’ locking feature provides a strong, vibration proof
joint
• Cam-retaining pips ensure that a cam is held in panel
position prior to assembly
System 5
Cams and Dowels
Ø15mm Cam3000
9537
9533 Ø15
e h
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
B D e h
Technical and mounting details
Panel thickness (mm)
Drilling depth (mm)
Drilling for dowel (mm)
Cam height (mm)
Item number
Zinc
Cam3000 Cross Drive PZ2 Drive
9537
9533 Ø15
e h
12/13 10.5 6 min. 9.9 09642 > 885
15/16 12.5 7.5-8 11.9 09490 > 885*
• Black available on request
Made of zinc
Cam3000 Hexagonal Drive Combined Drive with HEX 9537
9533 Ø15
e h
15/16 12.5 7.5-8 11.9 09537 > 885*
18/19 14 9-9.5 13.2 09536 > 885*
Made of zinc
• Use standard cover caps with pin=Ø4mm
• Black available on request
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.35
Connectors
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
Ø15
11.9
• Innovative design offers optimal performance with
maximum cost effectiveness
• Suitable for use with Combi dowels, forged steel dowels
and Quickfit dowels
• ‘Klix’ locking feature provides a strong, vibration proof
joint
• Cam-retaining pips ensure that a cam is held in panel
position prior to assembly
System 5
Cams and Dowels
Ø15mm Cam3000 S
B D e
Technical and mounting details
Panel thickness (mm)
Drilling depth (mm)
Drilling for dowel (mm)
Item number
Zinc
Zinc corrosil
Cam3000 S/15 PZ2 DriveØ15
11.9
15/18 12.5 7.5-8 09491 > 885* 897*
Made of zinc
Cover Caps
Made of plastic
> see page 3.50
3.36
• Available in a variety of head, drive recess and board
thickness versions to suit most applications
• Suitable for use with all Titus dowels
• ‘Klix’ locking feature provides a strong, vibration proof
joint
• Linear cam profile results in smooth, easy cam rotation
and dowel pull-up
System 5
Cams and Dowels
Ø15mm Cam2000
B D e
Technical and mounting details
Panel thickness (mm)
Drilling depth (mm)
Drilling for dowel (mm)
Item number
Nickel
Zinc
Cam2000 Ø15 PH Drive
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
12/13 10 min. 6-6.5 ^05587 > 847* 885*
12/13 10.9 6-6.5 05653 > 847* 885*
15/16 12.7 7.5-8 05644 > 847* 885
PZ Drive 5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
15/16 12.7 7.5-8 05654 > 847* 885
18/19 14 9-9.5 05656 > 847* 885
22/23 16 11-11.5 05657 > 847* 885
25/26 17.9 12.5-13 05676 > 847* 885
28/29 19.4 14-15.5 05678 > 847* 885
Made of zinc
^Ultraflat - specially designed for thin panels (not
compatible with TL dowels)
• Other finishes available on request
Cam2000 Ø15 Headed PH Drive
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
12 10 min. 6 ^05586 > 847* 885*
PZ Drive 5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
13 10.9
min. 6.5 05652 > 847* 885*
16 12.9 8 05658 > 847* 885*
19 13 9.5 05659 > 847* 885*
23 14.5 11.5 05675 > 847* 885*
26 16.5 13 05677 > 847* 885*
29 19.4 14.5 05679 > 847* 885*
Made of zinc
^Ultraflat - specially designed for thin panels (not
compatible with TL dowels)
• Other finishes available on request
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
Cover Caps for Ø15 Cams
Made of plastic
> see page 3.50
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.37
Connectors
• Suitable for all Titus screw-in dowels
• Available in a variety of head, drive recess and board
thickness versions to suit most applications
• Particularly suited to drawer front attachment
applications
• ‘Klix’ locking feature provides a strong, vibration proof
joint
• Linear cam profile results in smooth, easy cam rotation
and dowel pull-up
System 5
Cams and Dowels
Ø12mm Cam2000
B D e
Technical and mounting details
Panel thickness (mm)
Drilling depth (mm)
Drilling for dowel (mm)
Item number
Black painting plate
Nickel plated
Zinc
Corrosil zinc
Cam2000 Ø12 5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
12/13 10 min. 6-6.5 05575 > 838* 847* 885* 897*
15/16 12 7.5-8 05578 > 885*
18/19 13 min. 9-9.5 05580 > 885*
Made of zinc
• Other finishes available on request
Cam2000 Ø12 Headed 5675
5677 17.4 13
5658
5652
5659
8
6.5
12.4
10.9
9.5
11.5
13.9
15.9
17.5 26
11 13
12.5
19
23
14
16
16
5586 9.9 6
5678
5679
10.4 6
11.9 7.5
12 10
29
10.5 28/29
12
5676
5654
5657
5656
9.9 6
10.4
11.9 7.5
6
6
9.9
5563
5587
5644
6
6
10.4
9.9
11.9 7.5
25/26
15/16
22/23
18/19
10
12
10
10.5
12/13
15/16
12/13
10
10.5
12
e H B D
e H B D
H e B D
e H B D
Ø15
Ø17
Ø15
B
Ø15xD
e 1 mm
12 9.5 min. 5.25 05574 > 838* 847* 885* 897*
12 10 min 6 05576 > 885*
16 12.5 8 05579 > 885*
Made of zinc
• Other finishes available on request
e
B
Ø12 x D
Ø12 Ø12
Ø14
1 mm
e
B
Ø12 x D
Ø12 Ø12
Ø14
1 mm
Cover Caps for Ø12 Cams
Made of plastic
> see page 3.50
3.38
System Features
A face boring connector family for
32mm system drilling with full range of
panel and application variants for all
cabinet manufacturing applications:
• Minimum drilling requirements
• Linear cam design for constant
tightening loads when driving
• Angledrive feature on cam for
maximum driving comfort
• Interchangeable pins for wood,
plastic and steel applications
• Pins with twinstart drive for fast
insertion
• Interchangeable Quickfit pin
fastenings available
• Toolless fastening capable versions
• Back-to-back fastenings for
common vertical panel fixing of
shelves
System 6 consists of a range of 20mm
and 25mm diameter housings, Quickfit™
and conventional dowels, end dowels
and double ended dowels.
Housings are made from high grade
plastic or zinc, with zinc cams.
Wedgefix-6 connector is a special
fastener without cam, simply to snap
onto a pre-inserted dowel.
Applications Titus System 6 is ideal for use in high
volume production of case goods,
closet and garage storage systems.
As no edge boring is required,
it is an excellent choice for
manufacturing environments with limited
drilling capacity.
Side-entry
Drop-on
Side-entry insertion of shelf panel: from
the side or from the top.
Drop-on insertion of shelf panel:
only from the top.
Using drop-on connections allows for
one-man installation.
Angledrive feature The angledrive feature on the cam
allows for the angled position of the
screwdriver with the locking action
creating a tight and secure joint.
System 6
Quickfit-Expando Connectors
drop on
side entry drop on
side entry
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.39
Connectors
System Features
Outrigger/
Non-outrigger
Outrigger Non-outrigger
Expando function Expanding housings and dowels
provide a tight joint.
Assembly 1. Press the housing into face board 2. Press the dowel into side panel
3. Assemble the panels 4. Tighten the joint
System 6
Quickfit-Expando Connectors
3.40
• Available in Ø5mm, Ø8mm and Ø10mm for panelto-panel, panel-to-hollow profile and back-to-back
applications
• Suitable for applications with all Titus Ø20 and/or
Ø25mm Expando-6 housings
• ‘Klix’ locking feature provides a strong, vibration proof
connection
• Depth stop collar for accurate insertion
System 6
Quickfit-Expando
Expanding Dowels
D2
Technical and mounting details
Drilling diameter for
dowel thread (mm)
Item number
Dark grey
Dowel 5 06408 > 880
8 06410 > 880
Made of plastic and zinc
Dowel Ø5 x 7.5
Back-to-back Applications
06479 > 880
Made of plastic and zinc
ØD2 x 12.5
Ø8 x 12.5
Ø5 x 7.5
Ø10 x 12.5
ØD2 x 12.5
Ø8 x 12.5
Ø5 x 7.5
Ø10 x 12.5
D2= Ø5mm
D2= Ø8mm
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.41
Connectors
• Available in various Ø3mm and/or Ø5mm thread forms
for screw-in, knock-in and/or ‘spiked’ hole applications
• Suitable for applications with all Titus Ø20mm and/or
Ø25mm Expando-6 housings
• ‘Klix’ locking feature provides a strong, vibration proof
connection
• Dowels feature an integral skirt which acts as a positive
stop during insertion
System 6
Quickfit-Expando
Dowels
C
Technical and mounting details
Drilling diameter for
dowel thread (mm)
Item number
Zinc
Zinc plated
Dowel Ø5 9 06401 > 885*
8 06402 > 885 883*
11.5 06406 > 885 883
Made of zinc or steel
Dowel Ø5 x 11 Knock-in 06403 > 885*
Made of zinc
Dowel M4 x 7 06405 > 883*
Made of steel
Dowel Ø3 x 11.5 06495 > 883*
Made of steel
Ø5xC
Ø5x8
Ø5x12
hole to suit M4 insert
Ø5x11.5
Ø3 max
Ø5xC
Ø5x8
Ø5x12
hole to suit M4 insert
Ø5x11.5
Ø3 max
Ø5xC
Ø5x8
Ø5x12
hole to suit M4 insert
Ø5x11.5
Ø3 max
Plastic inserts > see page 3.48
Ø5xC
Ø5x8
Ø5x12
hole to suit M4 insert
Ø5x11.5
Ø3 max
3.42
• For 16mm, 18mm and 19mm board
• Suitable for applications with all Titus Ø20mm and/or
Ø25mm Expando-6 housings
• ‘Klix’ locking feature provides a strong, vibration proof
connection
System 6
Quickfit-Expando
Double-ended Dowels
B
Technical and mounting details
Panel thickness (mm)
Item number
Zinc
Double-ended Dowel 16 06414 > 885
18 06413 > 885*
19 06416 > 885*
Made of zinc
1.5
Ø9.5
Ø4.8 Ø5.8
Ø4.8
Ø5 x thru
B
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.43
Connectors
• Available in 15mm/16mm and 18mm/19mm versions for
drop-on and/or side-entry applications
• Available in all-metal or plastic/metal options
• ‘Klix’ locking feature provides a strong vibration proof
connection
• Compatible with all screw-in and Quickfit-6 dowels
System 6
Quickfit-Expando
20mm Expanding Housing
Non-outrigger
e B D
Technical and mounting details
Drilling for dowel (mm)
Panel thickness (mm)
Drilling depth (mm)
Item
number
Dark brown plastic
Nickel plated
Silver plastic
White plastic
Side-entry 8 15/16 12.5 06451 > 847*
9.5 18/19 14 06453 > 847*
Made of zinc
Side-entry 8 15/16 12.5 06435 > 831* 861* 877
9.5 18/19 14 06437 > 831* 861* 877*
Made of plastic
• Other finishes available on request
Drop-on 8 15/16 12.5 06447 > 847*
9.5 18/19 14 06449 > 847*
Made of zinc
Drop-on 8 15/16 12.5 06431 > 831* 861* 877*
9.5 18/19 14 06433 > 831* 861* 877*
Made of plastic
• Other finishes available on request
H E
22
22
H E
drop on
side entry
Ø20 x D
9.5
B
e
H E
22
22
H E
drop on
side entry
Ø20 x D
9.5
B
e
H E
22
22
H E
drop on
side entry
H E
22
22
H E
drop on
side entry
Ø20 x D
9.5
B
e
Ø20 x D
9.5
B
e
3.44
32 9.5
Ø10 x 10.5 Ø20 x D
B e
H E 22 22
32 32
H E
• Available in 15mm/16mm and 18mm/19mm versions for
drop-on and/or side-entry applications
• Available in all-metal or plastic/metal options
• ‘Klix’ locking feature provides a strong vibration proof
connection
• Compatible with all screw-in and Quickfit-6 dowels
System 6
Quickfit-Expando
20mm Expando Housing
Outrigger
32 9.5
Ø10 x 10.5 Ø20 x D
B e
H E 22 22
32 32
H E
32 9.5
Ø10 x 10.5 Ø20 x D
B e
H E 22 22
32 32
H E
32 9.5
Ø10 x 10.5 Ø20 x D
B e
H E 22 22
32 32
H E
e B D
Technical and mounting details
Drilling for dowel (mm)
Panel thickness (mm)
Drilling depth (mm)
Item number
Dark brown plastic
Black plastic
Nickel plated
White plastic
Side-entry 8 15/16 12.5 06459 > 847*
9.5 18/19 14 06461 > 847*
Made of zinc
Side-entry 8 15/16 12.5 06443 > 831* 835* 877
9.5 18/19 14 06445 > 835* 877*
Made of plastic
• Other finishes available on request
Drop-on 8 15/16 12.5 06455 > 847
9.5 18/19 14 06457 > 847*
Made of zinc
Drop-on 8 15/16 12.5 06439 > 831* 835* 877
9.5 18/19 14 06441 > 831* 835* 877*
Made of plastic
• Other finishes available on request
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.45
Connectors
• Available in 12mm, 15mm/16mm and/or 18mm/19mm
versions for Quickfit-6 and/or standard dowel
applications
• Available in a variety of plastic colours
• Wedgefix-6 housing allows easy customer hand
assembly or factory automated insertion
• When used with Quickfit-6 dowels this provides a true
toolless fastening system
System 6
Quickfit-Expando
Expando Wedgefix
Housing (No Inner Cam)
e B D
Technical and mounting details
Drilling for dowel (mm)
Panel thickness (mm)
Drilling depth (mm)
Item number
White
Black
Dark brown
Silver
For Use with Screw-in Dowels 6 12 10 06470 > 877* 861*
8 15/16 12.5 06473 > 877 835* 831* 861*
9.5 18/19 14 06465 > 877* 835* 831* 861*
11 22 16 06464 > 861*
Made of plastic
• Other finishes available on request
For Use with Quickfit Dowels 8 15/16 12.5 06471 > 877* 835* 831* 861*
9.5 18/19 14 06472 > 877* 835* 831* 861*
Made of plastic
• Other finishes available on request 22
Ø20 x D
9.5
B
e
Ø20 x D
9.5
B
e
22
3.46
• Available in 15mm/16mm and 18mm/19mm versions for
drop-on and/or side-entry applications
• Available in all-metal or plastic/metal options
• ‘Klix’ locking feature provides a strong vibration proof
connection
• Compatible with all screw-in and Quickfit-6 dowels
System 6
20mm Knock-in Housing
Non-outrigger
e B D
Technical and mounting details
Drilling for dowel (mm)
Panel thickness (mm)
Drilling depth (mm)
Item number
Black plastic
White plastic
Side-entry 8 15/16 12.5 06381 > 835 877
9.5 18/19 14 06385 > 835* 877
Made of plastic
Drop-on 8 15/16 12.5 06383 > 835* 877
9.5 18/19 14 06387 > 835* 877
Made of plastic
Ø20 x D
9.5
B
e
Ø20 x D
9.5
B
e
H E
22
22
H E
drop on
side entry
H E
22
22
H E
drop on
side entry
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.47
Connectors
• High performance fastener
• Thread design gives repeatability
• Multi-drive recess
• Higher than average pull-up
System 7
High Strength Connectors
Contract Fix™ System
Technical and mounting details Item number
Zinc plated
Zinc
M6 Dowel 7x34 05971 > 883
Made of steel
Housing Cylinder 15x12 05960 > 885
Made of zinc
Grub Screw 05917 > 885
Made of zinc
34
Ø7-8
7.5/9
Ø15x12.5/14
34
Ø7-8
7.5/9
Ø15x12.5/14
34
Ø7-8
7.5/9
Ø15x12.5/14
Inserts
Made of zinc
> see page 3.48
3.48
• Available in both zinc and plastic for use in various
applications
• Suitable for use with various threaded dowels
• Suitable for use with various panel thicknesses
• Knock-in and screw-in versions available
Accessories for
Connectors
Inserts
Technical and mounting details Item number
Raw
Ø8 x 9 408.3166 > 600*
Made of zinc
Ø9 x 13 408.3391 > 600
Made of zinc
Ø9.5 x 18 408.3423 > 600*
Made of zinc
Ø12 x 15 408.3424 > 600*
Made of zinc
18
M6 6 Ø9.5
9
M6 Ø8
M6
13
Ø9
13
002175 M6 6 Ø9.5
M8
15
8 Ø12
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.49
Connectors
Accessories for
Connectors
Inserts
C
Technical and mounting details
Drilling length for insert
(mm)
Item number
Natural white
Natural
Ø10 x 13/M6 Nut 13 275.4035 > 200*
11 275.4058 > 200*
Made of plastic
Ø8 x 10/M4 Nut 276.4036 > 200*
Made of plastic
Euro Thread Twinstart thread 02182 > 346*
Made of plastic
M6
M6
Ø8
10
Ø10
Ø10
C
13
Ø10 2182
12
2172
twin-start Euro thread
single-start Euro thread
M4
M6
M6
Ø8
10
Ø10
Ø10
C
13
Ø10 2182
12
2172
twin-start Euro thread
single-start Euro thread
M4
M6
M6
Ø8
10
Ø10
Ø10
C
13
Ø10 2182
12
2172
twin-start Euro thread
single-start Euro thread
M4
M6
M6
Ø8
10
Ø10
Ø10
C
13
Ø10 2182
12
2172
twin-start Euro thread
single-start Euro thread
M4
M6
M6
Ø8
10
Ø10
Ø10
C
13
Ø10 2182
12
2172
twin-start Euro thread
single-start Euro thread
M4
275-4035
275-4058
M6
M6
Ø8
10
Ø10
Ø10
C
13
Ø10 2182
12
2172
twin-start Euro thread
single-start Euro thread
M4
3.50
• Available in a variety of colours
• Suitable for use with both pozi and hex cam drive
features
• Suitable for use with various diameter cams
• Both domed and flat versions available
Accessories for
Connectors
Cover Caps
Technical and mounting details
Inner diameter (mm)
Item number
Dark brown
Black
Light brown
Light grey
Cover Cap Ø17 PZ2 3.2 277.4355 > 370 390 330* 380
Made of plastic
• Other finishes available on request
• Suitable for cams with Pozi 2 recess
Cover Cap Ø17 Hex 4.2 277.4225 > 370* 390* 330* 380*
Made of plastic
• Other finishes available on request
• Suitable for cams with Hex recess
Cover Cap Ø29.5 275.4034 > 370* 390* 330* 380*
Made of plastic
• Other finishes available on request
Ø15
Ø25
Ø13
Ø15
Ø25
Ø13
Ø29.5
Ø17
2.5
Ø17
2.5
Ø3.2
Ø4.2
Ø29.5
Ø17
2.5
Ø17
2.5
Ø3.2
Ø4.2
Ø15
Ø25
Ø13
Ø29.5
Ø17
2.5
Ø17
2.5
Ø3.2
Ø4.2
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.51
Adjustable Cabinet Legs
Adjustable Cabinet Legs
Leg Top Fixes • Lip provides additional support to end panel and gives
extra strength
• Rivet fix design gives quick fastening of socket
• Choice of knock-in dowel or screw-in sockets
• Invert second clip for corner plinth fixing
A D B1
Description
Drilling diameter (mm)
Drilling depth (mm)
Drilling distance (mm)
Item number
Black
Leg Tops With lip Knock-in 2-pin 10/3 12.5/6 64x64 02669 > 835
With lip Screw-in 3 6 64x64 02671 > 835
With lip Knock-in 4-pin 10 12.5 64x64 02672 > 835
Without lip Knock-in 2-pin 10/3 12.5/6 64x64 02711 > 835
Without lip Screw-in 3 6 64x64 02712 > 835
Without lip Knock-in 4-pin 10 12.5 64x64 02713 > 835
Made of plastic
Rivet Fix Leg Top 10 12.5 02663 > 835
Made of plastic
B1 21
32 38.5
ØA x D
Ø15x12
24
34 x 34
ØA x D
24
34 x 34
Ø10x12.5
32
32
24
34 x 34
32
32
Leg height
adjustment feature
02671
3.52
Adjustable Cabinet Legs
Adjustable Cabinet Legs
Adjustable Leg,
Extension and Foot • Legs are supplied assembled at a pre-set height
• Wide adjustment range to fit all common plinth heights
• Jacking point adjustment feature
• Simple push-on socket design
• Telescopic leg offers unparalleled adjustment
B1 H Drilling distance (mm) Fitting height adjustment
(mm)
Item number
Black
Adjustable Leg 24 60-90 02570 > 835
24 92-150 02648 > 835
• To be used with screw-in plinth clip 02634 >
see page 3.54
Made of plastic
Adjustable Leg, Telescopic 38 85-165 02641 > 835
Made of plastic
• To be used with screw-in plinth clip 02500 >
see page 3.54
Adjustable Leg, with Foot 38 92-150 02699 > 835
38 110-170 02645 > 835
38 125-185 02706 > 835
Made of plastic
• To be used with screw-in plinth clip 02710 or
knock-in plinth clip 02578 > see page 3.54
H
B1
50
24
38.5
Height adjustment
from 85mm to 165mm
as shown
Leg height
adjustment feature
02648
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.53
Adjustable Cabinet Legs
Adjustable Cabinet Legs
Adjustable Cabinet Legs
Adjustable Leg,
Extension and Foot • Leg extension for use with all adjustable legs
• Fixed foot allows for common drilling distance (B1) of
all legs
Item number
Black
Leg Extension 02571 > 835
Made of plastic
Fixed Foot 02569 > 835
Made of plastic
2571
2569
50
Ø48
19
Ø76
2571
2569
50
Ø48
19
Ø76
Leg height
adjustment feature
3.54
Adjustable Cabinet Legs
Plinth Clips • Spring design eliminates the need for drilling and fits
into any position on plinth
• The screw-in version can sit in variable plinth positions
• When taking plinth around the corner, the fitting is
reversible
B1Drilling distance (mm)
Description Item number
Black
Plinth Clip 38 Screw-in Plinth Clip
for telescopic leg 02500 > 835
38 Knock-in Plinth Clip 02578 > 835
38 Screw-in Plinth Clip 02710 > 835
Made of plastic
Plinth Clip 24 Screw-in Plinth Clip 02634 > 835
Made of plastic
4
4
38.5
24
32
2578
2523, 2634
1371
7
32
4
4
38.5
24
32
2578
2523, 2634
1371
7
32
02578
Leg height
adjustment feature
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.55
Decorative Legs
Decorative Legs
for Furniture
Finish Adjustment (mm) Length (mm) Item number
Tiffany Leg Aluminium Ø35mm Brushed Grey 20 100 606.8D03.907.100
Brushed Grey 20 125 606.8D03.907.125
Brushed Grey 20 150 606.8D03.907.150
Made of aluminium
Stainless Steel Leg Ø50mm Stainless Steel 30 150 606.8D03.530.150
Made of stainless steel
Polished Chrome Leg Ø75mm Polished Chrome 30 870 606.8D05.452.707
Made of steel
3.56
Decorative Legs
for Tables, Sofas and Beds
Finish
Length (mm)
Adjustment (mm)
Item number
Table Leg Ø60mm Brushed Nickel 710 30 606.8D05.454.703
Polished Chrome 710 30 606.8D05.454.707
Made of steel
Square Sofa Leg 32 x 32mm Anodised Aluminium 150 N/A 606.8D03.807.150
Made of
aluminium
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.57
Fastmount
Fastmount®
Panel Mounting
3.58
Fastmount Panel
Mounting Systems
Perfect Panel Mounting
The secret to FastmountTM is the
unique set of design registered
interchangeable clips ideal for secure
fastening. With Fastmount, panels
can be easily removed and refitted in
any sequence, time after time.
Combining speed, versatility and
accuracy, the Fastmount system enables
designers, installers and contractors to
re-think the paneling process.
Fastmount is designed to perform on sea,
land and in the air. Applications of use
are only limited by your imagination and
common sense.
Benefits • No visible fixings
• Eliminates panel damage – install
panels during final build stages
• Variety of mounting options – selftapping, glue and screw fix
• Allows for panel flex and expansion
• Provides cavities for services and
enhanced acoustics
Applications • Ceilings, walls, feature panels and
upholstery
• Access, inspection and ventilation
panels
• Interior and selected exterior
applications
• Upholstered, painted, prefinished and
composite panels
• Mounts into a wide variety of substrates
e.g. GRP, composite, honeycomb
• New build, re-fit and upgrades
Clip Selection Guide
1 | FASTMOUNT PRODUCT CATALOGUE 2015
FASTMOUNT Setting the standard for panel mounting
Clip Selection Guide
Marine Clip Selection Guide
Architectural Clip Selection Guide
SUBSTRATE TYPE PANEL TYPE
Plywood Panels
<6mm
Plywood Panels
>6mm
Synthetic Panels
(Forex) <6mm
Synthetic Panels
(Forex) >6mm
Honeycomb Panels
(Aluminium)
Composite Panels
(foam core grp)
Plywood frames or Cnc
cut plywood ceiling
PC-F1A/AF1/SF1 +
PC-SM2
VL-F3 + VL-M3
LP-F8 + LP-SM8
PC-F1A + PC-M1A
PC-F1A + M2H/SM2/
SM2/VM1
LP-F8 + LP-M8/SM8
VL-F3 + VL-M3
MC-M5 + MC-F5/F10
PC-F1A+ PC-SM2
LP-F8 + LP-SM8
VL-F3 + VL-M3
PC-F1A + PC-M1A/
M2H/SM2/SM2H/VM1
LP-F8 + LP-M8/SM8
VL-F3 + VL-M3
MC-M5 + MC-F5/F10
PC-F1A + PC-SM2/
SM2H
LP-F8 + LP-SM8
VL-F3 + VL-M3
MC-M5 + MC-F5
PC-F1A /AF1/SF1 +
PC-SM2/SM2H
VL-F3 + VL-M3
LP-F8 + LP-SM8
Aluminium frames PC-RF1/SF1
PC-SF1 + PC-SM2
VL-F3 + VL-M3
PC-F1A/SF1/RF1 +
PC-M1A/M2H/SM2/
SM2H VM1
VL-F3 + VL-M3
MC-M5 + MC-F5/F10
PC-F1A + PC- SM2
LP-F8 + LP-SM8
VL-F3+VL-M3
PC-F1A/SF1/RF1 +
PC-M1A/M2H/SM2/
SM2H/VM1
VL-F3 + VL-M3
MC-M5 + MC-F5/F10
PC-F1A/SF1/RF1 +
PC-SM/SM2H
VL-F3 + VL-M3
MC-M5 + MC-F5
PC-RF1/SF1/F1A +
PC-SM2
VL-F3 + VL-M3
Composite substrate LP-DF8/F8 + LP-SM8
VL-F3 + VL-M3
PC-SF1 + PC-SM2
PC-F1A + PC-SM2
PC-F1A/SF1/AF1 +
PC-M1A/ M2H/SM2/
SM2H/VM1
VL-F3+VL-M3
MC-M5+MC-F5/F10
PC-F1A/SF1/AF1 +
PC-SM2
VL-F3+VL-M3
PC-F1A/SF1/AF1 +
PC-M1A/M2H/SM2/
SM2H/VM1
VL-F3+VL-M3
MC-M5+MC-F5/F10
PC-F1A/ SF1 +
PC-SM2
LP-DF8 + LP-SM8
VL-F3 + VL-M3
MC-M5 + MC-F5
LP-DF8/F8 + LP-SM8
VL-F3 + VL-M3
PC-AF1/SF1 + PCSM2
Steel frames PC-SF1 + PC-SM2
VL-F3+VL-M3
MS-CP + 1FR /1FS-CP
VL-F3+VL-M3
MC-M5+ MC-F5/F10
PC-SF1/RF1 +
PC-SM2
VL-F3 + VL-M3
PC-SF1/RF1 +
PC-M1A/M2H/SM2/
SM2H/VM1
VL-F3+VL-M3
MC-M5+ MC-F5/F10
PC-SF1/RF1 +
PC-SM2
VL-F3+VL-M3
MC-M5+ MC-F5
PC-SF1/RF1 + PCSM2/SM2H
VL-F3+VL-M3
MC-M5 + MC-F5/F10
SUBSTRATE TYPE PANEL TYPE
Plywood MDF Particle Board Acoustic Panel Honeycomb Fibrous Cement
Board Exterior Panels
Steel frames
eg. Rhondo
PC-SF1 + PC-M1A
PC-SF1 + PC-M2H
PC-SF1 + PC-SM2
PC-SF1 + PCSM2H
PC-SF1 + PC-M1A
PC-SF1 + PCSM2H
PC-SF1 + PC-M1A
PC-SF1 + PCSM2H + Glue
Thread
PC-SF1 + PC-SM2 PC-SF1 + PC-SM2 N/A N/A
Timber battens
or frames
PC-F1A + PC-VM1
PC-F1A + PC-M2H
PC-F1A + PCSM2H
PC-F1A + PC-VM1
PC-F1A + PC-M2H
PC-F1A + PC-VM1
PC-F1A + PC-M2H
LP-F8 + LP-SM8 LP-F8 + LP-SM8 N/A N/A
Concrete + timber batten PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
Must use
Timber Batten +
LP-F8 + LP-SM8
Must use
Timber Batten +
LP-F8 + LP-SM88
N/A N/A
Drywall
eg. Gib Board
LP-DF8 + LP-M8
LP-DF8 + LP-SM8
LP-DF8 + LP-M8
LP-DF8 + LP-SM8
LP-DF8 + LP-M8
LP-DF8 + LP-SM8
LP-DF8 + LP-SM8
with HMA (hot glue)
LP-DF8 + LP-SM8
with epoxy glue
N/A N/A
Plywood, MDF PC-F1A + PC-M1A
PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
PC-F1A + PC-M1A
PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
PC-F1A + PC-M1A
PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
LP-F8 + LP-SM8 LP-F8 + LP-SM8
with epoxy glue
This Clip Selection Guide should be used as a general guide only. Please contact Fastmount Headquarters for more detailed advice if required.
For overhead panels Fastmount strongly recommends a trial sample be made to prove compatability of our systems with the panels and substrates in your project.
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.59
Fastmount
Mounting Item number
White
Black
PC-01 Self-tapping Clip Set TapFast 606.8F20.122 > 201
Standard self-tapping system suitable for most
applications, using PC-F1A and PC-M1A. Fit with CT-03
and CT-10.
PC-M1B Standard Self-tapping Male Clip TapFast 606.8F20.222 > 201
Screws into 10mm hole drilled with CT-01 or CT-09. Fits
into PC-F1A, PC-SF1, PC-RF1, PC-AF1. Install with CT-10
(CT-04 can also be used).
PC-M2H Self-tapping Heavy Duty Male Clip TapFast 606.8F20.222 > 402
Fits into PC-F1A, PC-SF1, PC-RF1, and PC-AF1. Mounts
into 10mm hole CT-01 and CT-09. Minimum panel
thickness 9mm. Install with CT-10.
PC-VM1 Vario Self-tapping Male Clip TapFast 606.8F20.242 > 201
Variable gap, high shear strength self-tapping male clip.
Clips into PC-F1A, PC-SF1, PC-RF1, and PC-AF1.
Mounts into 10mm hole CT-01 and CT-09. Install with CT10. Minimum panel thickness 9mm.
PC-VMX Vario Self-tapping Extra Heavy Duty Male Clip, 15kg TapFast 606.8F20.244 > 201
Male self-tapping clip with variable gap and high shear
strength. Mounts into PC-F1A, PC-SF1, PC-RF1, PC-AF1.
Extra heavy duty clip with 15 kg pull-out load. Minimum
panel thickness 9mm. Screws into 10mm hole with CT-10.
Fastmount Panel
Mounting Systems
Standard Profile Range • Panels can easily be removed and refitted in any
sequence time after time
• Available in self-tapping installation
• A range of standard clips designed for adhesive fix,
heavy duty, high shear strength and variable gap
requirements
1 | FASTMOUNT PRODUCT CATALOGUE 2015
FASTMOUNT Setting the standard for panel mounting
Clip Selection Guide
Marine Clip Selection Guide
Architectural Clip Selection Guide
SUBSTRATE TYPE PANEL TYPE
Plywood Panels
<6mm
Plywood Panels
>6mm
Synthetic Panels
(Forex) <6mm
Synthetic Panels
(Forex) >6mm
Honeycomb Panels
(Aluminium)
Composite Panels
(foam core grp)
Plywood frames or Cnc
cut plywood ceiling
PC-F1A/AF1/SF1 +
PC-SM2
VL-F3 + VL-M3
LP-F8 + LP-SM8
PC-F1A + PC-M1A
PC-F1A + M2H/SM2/
SM2/VM1
LP-F8 + LP-M8/SM8
VL-F3 + VL-M3
MC-M5 + MC-F5/F10
PC-F1A+ PC-SM2
LP-F8 + LP-SM8
VL-F3 + VL-M3
PC-F1A + PC-M1A/
M2H/SM2/SM2H/VM1
LP-F8 + LP-M8/SM8
VL-F3 + VL-M3
MC-M5 + MC-F5/F10
PC-F1A + PC-SM2/
SM2H
LP-F8 + LP-SM8
VL-F3 + VL-M3
MC-M5 + MC-F5
PC-F1A /AF1/SF1 +
PC-SM2/SM2H
VL-F3 + VL-M3
LP-F8 + LP-SM8
Aluminium frames PC-RF1/SF1
PC-SF1 + PC-SM2
VL-F3 + VL-M3
PC-F1A/SF1/RF1 +
PC-M1A/M2H/SM2/
SM2H VM1
VL-F3 + VL-M3
MC-M5 + MC-F5/F10
PC-F1A + PC- SM2
LP-F8 + LP-SM8
VL-F3+VL-M3
PC-F1A/SF1/RF1 +
PC-M1A/M2H/SM2/
SM2H/VM1
VL-F3 + VL-M3
MC-M5 + MC-F5/F10
PC-F1A/SF1/RF1 +
PC-SM/SM2H
VL-F3 + VL-M3
MC-M5 + MC-F5
PC-RF1/SF1/F1A +
PC-SM2
VL-F3 + VL-M3
Composite substrate LP-DF8/F8 + LP-SM8
VL-F3 + VL-M3
PC-SF1 + PC-SM2
PC-F1A + PC-SM2
PC-F1A/SF1/AF1 +
PC-M1A/ M2H/SM2/
SM2H/VM1
VL-F3+VL-M3
MC-M5+MC-F5/F10
PC-F1A/SF1/AF1 +
PC-SM2
VL-F3+VL-M3
PC-F1A/SF1/AF1 +
PC-M1A/M2H/SM2/
SM2H/VM1
VL-F3+VL-M3
MC-M5+MC-F5/F10
PC-F1A/ SF1 +
PC-SM2
LP-DF8 + LP-SM8
VL-F3 + VL-M3
MC-M5 + MC-F5
LP-DF8/F8 + LP-SM8
VL-F3 + VL-M3
PC-AF1/SF1 + PCSM2
Steel frames PC-SF1 + PC-SM2
VL-F3+VL-M3
MS-CP + 1FR /1FS-CP
VL-F3+VL-M3
MC-M5+ MC-F5/F10
PC-SF1/RF1 +
PC-SM2
VL-F3 + VL-M3
PC-SF1/RF1 +
PC-M1A/M2H/SM2/
SM2H/VM1
VL-F3+VL-M3
MC-M5+ MC-F5/F10
PC-SF1/RF1 +
PC-SM2
VL-F3+VL-M3
MC-M5+ MC-F5
PC-SF1/RF1 + PCSM2/SM2H
VL-F3+VL-M3
MC-M5 + MC-F5/F10
SUBSTRATE TYPE PANEL TYPE
Plywood MDF Particle Board Acoustic Panel Honeycomb Fibrous Cement
Board Exterior Panels
Steel frames
eg. Rhondo
PC-SF1 + PC-M1A
PC-SF1 + PC-M2H
PC-SF1 + PC-SM2
PC-SF1 + PCSM2H
PC-SF1 + PC-M1A
PC-SF1 + PCSM2H
PC-SF1 + PC-M1A
PC-SF1 + PCSM2H + Glue
Thread
PC-SF1 + PC-SM2 PC-SF1 + PC-SM2 N/A N/A
Timber battens
or frames
PC-F1A + PC-VM1
PC-F1A + PC-M2H
PC-F1A + PCSM2H
PC-F1A + PC-VM1
PC-F1A + PC-M2H
PC-F1A + PC-VM1
PC-F1A + PC-M2H
LP-F8 + LP-SM8 LP-F8 + LP-SM8 N/A N/A
Concrete + timber batten PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
Must use
Timber Batten +
LP-F8 + LP-SM8
Must use
Timber Batten +
LP-F8 + LP-SM88
N/A N/A
Drywall
eg. Gib Board
LP-DF8 + LP-M8
LP-DF8 + LP-SM8
LP-DF8 + LP-M8
LP-DF8 + LP-SM8
LP-DF8 + LP-M8
LP-DF8 + LP-SM8
LP-DF8 + LP-SM8
with HMA (hot glue)
LP-DF8 + LP-SM8
with epoxy glue
N/A N/A
Plywood, MDF PC-F1A + PC-M1A
PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
PC-F1A + PC-M1A
PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
PC-F1A + PC-M1A
PC-F1A + PC-M2H
PC-F1A + PC-SM2
PC-F1A + PCSM2H
LP-F8 + LP-SM8 LP-F8 + LP-SM8
with epoxy glue
This Clip Selection Guide should be used as a general guide only. Please contact Fastmount Headquarters for more detailed advice if required.
For overhead panels Fastmount strongly recommends a trial sample be made to prove compatability of our systems with the panels and substrates in your project.
3.60
Mounting Item number
White
Black
Brown
PC-SM2 Standard Surface Mount Male Clip Surface 606.8F20.222 > 801
Adhesive fix super-groove base. Fits into PC-F1A,
PC-SF1, PC-RF1 and PC-AF1.
PC-SM2H Surface Mount Heavy Duty Male Clip, 10kg Surface 606.8F20.224 > 802
Male surface mount heavy duty clip with super groove
base for increased loading. Mounts into PC-F1A, PC-SF1,
PC-RF1 and PC-AF1. 10kg pull-out load per clip. Epoxy
glue fix. No special tools required for installation.
PC-F1A Standard Self-tapping Female Clip TapFast 606.8F20.322 > 201
Mounts into 16.8mm hole drill with CT-07, CT-13.
Compatible with male clips, PC-M1A, PC-M2H, PC-SM2
and PC-VM1. Install with CT-03.
PC-SF1 Standard Surface Mount Female Clip Surface 606.8F20.322 > 101
Screw fix. See product sheet for details. Compatible with
PC-M1A, PC-M2H, PC-SM2 and PC-VM1.
PC-RF1-B Standard Side Mount Female Clip Side 606.8F20.322 > 143
Screw fixed to side of decks heads (use CT-18 install jig),
for ceiling application. Suitable for other applications such
as floor panels and cabinets. Compatible with male clips,
PCM1A, PC-M2H, PC SM2 and PC-VM1.
Fastmount Panel
Mounting Systems
Standard Profile Range • Panels can easily be removed and refitted in any
sequence time after time
• Available in self-tapping installation
• A range of standard clips designed for adhesive fix,
heavy duty, high shear strength and variable gap
requirements
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.61
Fastmount
Mounting Item number
White
PC-AF1 Standard Female Auto Fit Clip Auto Fit 606.8F20.322 > 121
Female push fit clip suitable for application requiring lateral
adjustment. Fits all standard male clips: PC-M1A,
PC-M2H, PC-SM2, PC-SM2H, and PC-VM1.
Item number
CD-03 Standard Profile A5 Sample Panel 606.8F50.200.000
Demonstrates PC-F1A, PC-M1A, PC-M2H, PC-SM2,
PC-VM1 and PC-RF1 Standard Profile Range clips.
Includes: CT-05 panel removal tool.
CT-06T Standard Profile Range Trial Kit Complete with Tools 606.8F60.201.060
Complete with clips and tools. Includes: PC-F1A x12,
PC-M1A x12, PC-M2H x4, PC-SM2 x4, PC-SM2H,
PC-VM1 x4, PC-RF1 x4, PC-SF1 x4, CP-01A x4, CT-01,
CT-03, CT-05, CT-07, CT-09 and CT-10.
Fastmount Panel
Mounting Systems
Standard Profile Range
• Specifically designed to evaluate Fastmount removable
Standard Profile Range Sample and Trial Kits panel mounting styles
3.62
Fastmount Panel
Mounting Systems
Standard Profile Range
Item number
CT-01 Standard Profile Drill, 10mm with Shoulder 606.8F44.205.010
Use with Standard Profile Range and Low Profile Range.
For drilling through panel and pilot hole for CT-07.
CT-09 Standard Profile Drill, 10mm Forstner 606.8F44.205.090
Use with Standard Profile, Low Profile and Maxi Metal
Range. To drill blind holes in the back of panels. See install
guides and videos.
CT-07 Standard Profile Step Drill, Tungsten 606.8F44.205.070
Use with Standard Profile Range for PC-F1A, 16.8mm
diameter tungsten tipped to drill out 10mm hole in frame.
See install guides and video for correct use.
CT-013A Standard Profile Ø6.8mm Carbine Step Drill 606.8F44.205.130
Use with Standard Profile Range. To drill holes in
fibreglass, carbon fibre and kevlar laminates.
CT-15 Standard Tap Insertion Tool 606.8F44.206.150
Use with Standard Profile Range. Tap tool for tapping
thread to fit PC-F1A into fibre glass, aluminium, or similar.
Drill hole with CT-13A or drill out 10mm hole with CT-07
then tap.
Standard Profile Range Installation Tools
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.63
Fastmount
Fastmount Panel
Mounting Systems
Standard Profile Range
Standard Profile Range Installation Tools
Item number
CP-01ST Centre Point Insertion Tool 606.8F40.204.016
Use to align holes in panel and frame when using blind
holes in panel. Fits 10mm blind hole in panel (drilled with
CT-09) or into PC-F1A, PC-SF1, PC-RF1 and PC-AF1.
Stainless Steel tip option for hard material. Use CP-01A
for softer materials.
CT-03 Standard Female Insertion Tool 606.8F44.207.030
Use with Standard Profile Range. For installation of selftapping female PC-F1A using battery drill with correct
torque setting.
CT-10 Standard Self-tapping Male Clip Insertion Tool 606.8F44.207.100
Use with Standard Profile, Low Profile, and Panel Control
Range. For installation of self-tapping male PC-M1A,
PC-M2H, PC-VM1, PS-150, and LP-M8 using battery
drill with correct torque setting.
3.64
Fastmount Panel
Mounting Systems
Standard Profile Range
Standard Profile Range Installation Tools
Item number
CT-08 Standard Installation Kit 606.8F44.201.080
Installation tools for Standard Profile Range of clips. One
each CT-01, CT-03, CT-05, CT-07, CT-09, and CT-10 in
plastic box.
CT-06S Standard Profile Range Service Kit 606.8F44.222.060
For on-board maintenance of Standard Profile Range
clips. Includes: PC-M1A x24, PC-M2H x4, PC-SM2 x4,
PC-SM2H x4, CT-10 male clip tool and CT-05 covered
panel removal tool.
Additional installation tools > See page 3.78
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.65
Fastmount
Mounting Item number
White
LP-M8A Low Profile Self-tapping Male Clip TapFast 606.8F22.122 > 201
Screws into plywood and MDF type boards with 10mm
hole. Mark with CP-08, drill with CT-09 and install with
CT-10 install tool. Use with LP-F8 and LP-DF8 female
clips.
LP-SM8As Low Profile Surface Mount Male Clip Surface 606.8F22.222 > 801
Adhesive fix super groove base onto panel or frame. Can
also be screw fixed with #6 gauge self-tapping screw. Use
with LP-F8 or LP-DF8 female Low Profile Range clips.
LP-F8 Low Profile Self-tapping Female Clip TapFast 606.8F22.322 > 201
Screws into plywood and MDF type boards with 25 to
25.4mm hole with CT-19 install tool. Use with LP-M8 and
LP-SM8 male clips.
LP-DF8 Low Profile Self-tapping Female Clip, Coarse Thread TapFast 606.8F22.322 > 401
Screws into 25mm hole into drywall plasterboard and
soft core material (rigid foam/balsa) from 10mm thick with
CT-19 install tool, in battery drill with correct clutch setting.
Use with LP-M8 and LP-SM8 male clips.
LP-AF8 Low Profile Female Auto Fit Clip Auto Fit 606.8F22.322 > 121
Female clip with lateral adjustment push fits into 35mm
pre-drilled hole in deck head frame (grounds). Fits all Low
Profile Range male clip halves. Designed for use with
curved panels.
Fastmount Panel
Mounting Systems
Low Profile Range • Self-tapping and surface mount for a variety of
substrates
• Suitable for rigid foam core, soft core materials, MDF
and plasterboard
• 360 degree lateral adjustment, fitting into a Ø35 hole
3.66
Fastmount Panel
Mounting Systems
Low Profile Range • Specifically designed to evaluate Fastmount removable
panel mounting styles
Low Profile Range Sample and Trial Kits
Item number
CD-08 Low Profile Range Sample Panel 606.8F50.220.000
Demonstration panel for Low Profile Range series.
Includes: LP-F8, LP-M8, LP-SM8 and LP-AF8.
LP-08T Low Profile Trial Kit 606.8F60.221.080
Complete with clips and tools. Includes: LP-F8 x12,
WLP-DF8 x4, LP-AF8 x4, LP-M8 x8, LP-SM8 x4,
CP-08 x4, CT-05, CT-10 and CT-20 with product sheets
and installation guide.
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.67
Fastmount
Fastmount Panel
Mounting Systems
Low Profile Range
Low Profile Range Installation Tools
Item number
CP-08ST Low Profile Centre Clip Insert 606.8F40.224.086
Stainless steel tip center points for use with Low Profile
Range clips LP-F8 and LP-DF8. Used to mark hard panel
materials where plastic center point (CP-08) will not work.
CT-19 Low Profile Insertion Tool 606.8F44.227.194
Aluminium install tool for female clips LP-F8 and LP-DF8
Low Profile Range. Use in battery drill with correct clutch
setting.
CT-20 Low Profile Insertion Tool 606.8F44.227.206
Red plastic moulded install tool for female clips LP-F8 and
LPDF8 Low Profile Range. Use in battery drill with correct
clutch setting. For normal use, for large quantity installs
use CT-19.
3.68
Fastmount Panel
Mounting Systems
Low Profile Range
Low Profile Range Installation Tools
Item number
LP-08Y Low Profile Installation Kit 606.8F44.221.060
Contains tools for installing Low Profile Range clips
(LP-F8, LPDF8, LP-M8) and panel removal tool (covered
panels). Plastic box with CT-05, CT-09, CT-10 and CT-20
x1.
CT-01 Standard Profile Drill, 10mm with Shoulder 606.8F44.205.010
Use with Standard Profile Range and Low Profile Range.
For drilling through panel and pilot hole for CT-07.
CT-09 Standard Profile Drill, 10mm Forstner 606.8F44.205.090
Use with Standard Profile, Low Profile and Maxi Metal
Range. To drill blind holes in the back of panels. See install
guides and videos.
CT-10 Standard Self-tapping Male Clip Insertion Tool 606.8F44.207.100
Use with Standard Profile, Low Profile, and Panel Control
Range. For installation of self-tapping male PC-M1A,
PC-M2H, PC-VM1, PS-150, and LP-M8 using battery
drill with correct torque setting.
Additional Installation Tools > See page 3.78
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.69
Fastmount
Mounting Item number
Silver
VL-03 Very Low Profile Clip Set Surface Recessed 606.8F24.122 > 101
For surface or recessed mounting. Can be screw or glue
fixed. Versatile clip able to be installed without special
tools. Pull-out load 5kg per clip. VL-03 set packed 100 per
bag with VL-M3 + VL-SS3 inner bag, VL-F3 in outer bag.
Now supplied with stainless steel screw (VL-SS3).
VL-M3 Very Low Profile Male Screw on Surface Mount Clip Surface 606.8F24.222 > 101
Male clip half for surface mounting. Can be screw fixed
with lateral adjustment or glue fixed. Versatile clip able to
be installed without special tools. Pull-out load 5kg per
clip. The VL-M3 is used with VL-F3 + VL-SS3.
VL-F3 Very Low Profile Female Screw on Clip Surface Recessed 606.8F24.322 > 101
Female clip half for surface or recessed mounting. Can
be screw or glue fixed. Versatile clip able to be installed
without special tools. Pull-out load 5kg per clip use with
VL-M3.
Fastmount Panel
Mounting Systems
Very Low Profile Range • Self-aligning secure mounting (min. 5kg per clip)
• Quick installation requires no special tools or skilled
labour
• Clip lead-in for easy fitting
• Can be screw fixed with lateral adjustment
3.70
Mounting Item number
Black
Stainless steel
VL-03H Very Low Profile Heavy Duty Clip Set Surface recessed 606.8F24.522 > 004
Male and female very low profile heavy duty system
designed for surface or recessed mounting of heavier
panels. 10 kg pull-out load per clip set. Can be glue or
screw fixed with VL-SS3. No special tools required for
installation. Supplied with stainless steel screw VL-SS3.
VL-M3H Very Low Profile Heavy Duty Male Clip Surface 606.8F24.224 > 000
Male very low profile surface mount clip. Compatible with
female clip VL-F3H. 10 kg pull-out load per clip set. Can
be glue or screw fixed with VL-SS3. No special tools
required for installation.
VL-F3H Very Low Profile Heavy Duty Female Clip Surface recessed 606.8F24.124 > 101
Female very low profile heavy duty clip for surface or
recessed mounting. Compatible with male clip VL-M3H.
10 kg pull-out load per clip set. Epoxy glue or screw fix
with VL-SS3. No special tools required for installation.
VL-SS3 Very Low Profile Screw Screw-in 606.8F24.523 > 004
Custom type 303 stainless steel screw for fixing VL-03
and VL-03H clip sets into panels as thin as 5.5mm. Pozi
drive head. Supplied with VL-03 and VL-03H clip sets.
Fastmount Panel
Mounting Systems
Very Low Profile Range • Self-aligning secure mounting (min. 10kg per clip)
• Quick installation requires no special tools or skilled
labour
• Clip lead-in for easy fitting
• Can be screw fixed with lateral adjustment
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.71
Fastmount
Fastmount Panel
Mounting Systems
Very Low Profile Range • Specifically designed to evaluate Fastmount removable
panel mounting styles
Very Low Profile Range Sample and Trial Kits
Very Low Profile Range Installation Tools
Item number
VL-CP3 Very Low Profile Centre Point Insert 606.8F40.244.036
Center point for Very Low Profile Range clips VL-F3 and
VL-M3. Use to mark hole centre in panel for correct clip
alignment. Has stainless steel tip for marking panel or
frame. Tip: push fits into either side of nylon moulding.
See install guide.
Item number
CD-VL3 Very Low Profile Sample Panel 606.8F50.240.000
Demonstration panel for Very Low Profile Range clip
series. VL-03 = VL-F3 + VL-M3.
LP-03T Very Low Profile Trial Kit 606.8F60.241.030
Includes: VL-F3 x10, VL-M3 x10, VL-SS3 x10 and VL-CP
x2 with metal tip, plus information pack.
Additional Installation Tools > See page 3.78
3.72
Mounting Item number
Grey metal
MC-05 Metal Range Panel Clip Set, 5kg TapFast / Screw-on 606.8F30.122 > 204
Ideal for fire rated panels the MC-05 is designed to
withstand high temperatures and also provides acoustic
and vibration isolation. The self-centering design allows for
tolerance and panel flexing. Self-tapping with MC-IT5 and
screw fit installation options. Can be used in conjunction
with Standard Profile Range Clips.
MC-05 = MC-F5 + MC-M5. 5kg pull-out load.
MC-10 Metal Range Maxi Clip Set, 10kg TapFast / Screw-on 606.8F30.324 > 804
Ideal for fire rated panels the MC-10 is designed to
withstand high temperatures and also provides acoustic
and vibration isolation. The self-centering design allows for
tolerance and panel flexing. Self-tapping with MC-IT5 and
screw fit installation options. Can be used in conjunction
with Standard Profile Range Clips.
MC-10 = MC-F10 + MC-M5. 10kg pull-out load.
MC-F10 Metal Range Self-tapping Female Clip, 10kg TapFast / Screw-on 606.8F30.324 > 204
Female half of metal clip set MC-10 (black centre), use
with MC-M5. Self-tapping with MC-IT5, and screw fit
installation with #5 gauge screws.
MC-F5 Metal Range Self-tapping Female Clip, 5kg TapFast / Screw-on 606.8F30.322 > 804
Female half of metal clip set MC-05 (white centre), use
with MC-M5. Self-tapping with MC-IT5, and screw fit
installation with #5 gauge screws.
Fastmount Panel
Mounting Systems
Metal Range • Metal clip to withstand high temperatures
• Allows for tolerance & panel flex (self-centering)
• Provides acoustic & vibration isolation
• 10kg pull-out load
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.73
Fastmount
Mounting Item number
Grey metal
MC-M5 Metal Range Self-tapping Male Clip, 5kg TapFast 606.8F30.222 > 204
Self-tapping male half of Maxi Metal Clip Set fits MC-F5
and MC-F10. Install with MC-IT5.
• Sample kits are specifically designed to evaluate the
Fastmount Metal Range panel mounting system
Fastmount Panel
Mounting Systems
Metal Range
Metal Range Sample Kits
Item number
CD-MC5 Metal Range Sample Panel Kit 606.8F50.300.000
Demonstration panel for Maxi Metal Range clips with
MC-F5 + MC-M5H.
3.74
Fastmount Panel
Mounting Systems
Metal Range
Metal Range Installation Tools
Item number
MC-CP5 Metal Range Centre Point Insert 606.8F40.304.056
Centre point fits MC-F5 metal clip. Use to mark hole
centre in panel, for correct clip alignment. Has stainless
steel tip for marking panel. Refer to install guide.
MC-IT5 Install Tool for Metal Clip MC-F5 and MC-M5 606.8F44.418.054
For installation of self-tapping male MC-M5H, can also be
used for MC-F5 into plywood or similar. Use battery drill
with correct torque setting. Refer to installation video.
CT-09 Standard Profile Drill, 10mm Forstner 606.8F44.205.090
Use with Standard Profile, Low Profile and Maxi Metal
Range. To drill blind holes in the back of panels. See install
guides and videos.
Additional Installation Tools > See page 3.78
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.75
Fastmount
Fastmount Panel
Mounting Systems
Panel Control Range • Secures heavy panels
• Easy one person removal of large panels
• Prevents panels falling during fire exit
• Works with existing Fastmount clips
Mounting Item number
PS-150E Panel Safe Easy Fit Self-tapping Clip, 150mm TapFast 606.8F36.122.205
Suspends panel on removable stainless steel wire strops.
Suitable for use in conjunction with any of the Fastmount
range of clips. Standard drop length 150mm, with custom
lengths available on request. Install with CT-10. Note:
custom products have a six-week lead time.
PS-S150E Panel Safe Easy Fit Surface Mount Clip, 150mm Surface 606.8F36.122.805
Suspends panel on removable stainless steel wire strops.
Suitable for use in conjunction with any of the Fastmount
range of clips. Standard drop length 150mm, with custom
lengths available on request. Glue or screw fix to panel.
Note: custom products have a six-week lead time.
PS-150 Panel Safe Clip, 150mm TapFast 606.8F36.122.215
Suspends panel on removable stainless steel wire strops.
Suitable use in conjunction with any of the Fastmount
range of clips. Standard drop length 150mm, with custom
lengths available on request. Install with CT-07, CT-03 and
CT-10. Note: custom products have a six-week lead time.
PS-Custom Panel Safe Customer Length TapFast 606.8F36.100.000*
Specify required type and length. Use with Fastmount
system clips. PS-S custom, surface mount option and
easy fit or standard options available. Custom lengths from
50mm to 500mm.
*Available on request.
3.76
Fastmount Panel
Mounting Systems
Textile Range
Mounting Item number
TC-06 Textile Range Clip Set Screw-on 606.8F37.122.060
Textile Clip Set = TC-M6 + TC-F6
Secure textile and soft furnishing clip system.
Ensures fast, precise cushion fixing, and fast
cushion removal.
TC-F6 Female Textile Clip Screw-on 606.8F37.322.260
Enables the attachment of soft furnishings to hard surfaces
and makes furnishings quick to install and remove.
High quality, secure finish.
Easy alignment to replace the cushion.
Invisible fixing.
10kg break-out load.
TC-M6 Male Textile Clip Screw-on 606.8F37.222.160
Enables the attachment of soft furnishings to hard surfaces
and makes furnishings quick to install and remove.
High quality, secure finish.
Easy alignment to replace the cushion.
Invisible fixing.
10kg break-out load.
TC-R6 Textile Range Clip Removal Tool 606.8F44.418.060
No force required to remove the furnishing – simply press one
of the three buttons to disengage the block.
Saves removal time for staff and crew.
• Enables the attachment of soft furnishings to hard
surfaces and makes furnishings quick to install and
remove
• Easy alignment to replace the cushion
• Invisible fixing – no visible domes, screws, straps or
hook and loop
• 10kg break-out load
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.77
Fastmount
Fastmount Panel
Mounting Systems
Textile Range
Item number
TC-06T Textile Range Sample Panel and Trial Kit 606.8F60.261.060
A4 size cushion sample panel demonstrating TC-F6 and
TC-M6 from the Textile Range. 4 x TC-F6, 4 x TCM6, 2 x
TC-CP6, 1 x TC-R6.
Item number
TC-CP6 Textile Range Centre Point Insert 606.8F40.404.060
Textile Range centre point with stainless steel tip to mark
hole centre in panel for correct clip alignment.
See install guide for additional information.
Textile Range Sample and Trial Kits
Textile Range Installation Tools
Additional Installation Tools > See page 3.78
3.78
Item number
CT-12 HSS Countersink Drill Bit, 31mm with 10mm Shank 606.8F44.415.054
To be used to countersink entry edge of hole (1-2mm) in
hard materials such as MDF, hard plywood, fibre glass,
plastic. Use when drilling holes for PC-M1B, PC-M2H,
PC-VM1, PC-VM1H, LP-M8, LP-F8 and LP-DF8.
CT-18 Guide Drill 606.8F44.415.184
Use with Standard Profile Range. Drill guide for PC-RF1
mounting options.
CT-05 Panel Removal Tool 606.8F44.418.050
Stainless steel tool for removing covered (upholstered)
panels. Do not use with painted panels.
CT-17 Panel Removal Tool, Painted Panel 606.8F44.418.170*
Panel removal and handling, using a glass suction cup
for painted and prefinished panels. Always use two glass
suckers to control panel removal.
CT-09DG Drill Gauge for CT-09 Drill Bit 606.8F44.205.091
Drill Gauge for use with CT-09 drill bit. Designed for depth
control when blind drilling for Standard and Low Profile
range male clips. Machined aluminium housing, anodised
red for durability. NOTE: Sold separately to CT-09.
Fastmount Panel
Mounting Systems
Additional Installation Tools • Installation tools designed specfically for the Fastmount
panel mounting systems
Download supporting documentation from the Titus Tekform website titustekform.com.au 3.79
Fastmount
Item number
CG-3010 SuperGroove™ Adhesive, 30ml 606.8F38.200.030*
Fastmount SuperGroove Adhesive™ 30ml twin tube
manual dispenser for use with the Fastmount Surface
Mount range. 10-minute cure, solvent-free, non-toxic,
no VOCs, RoHS and REACH compliant, 12-month shelf
life. Ideal for small installations and emergency repairs.
Proportional 1:1 mixing. No additional equipment required.
CG-40010 SuperGroove™ Adhesive, 400ml 606.8F38.200.400*
Fastmount SuperGroove Adhesive™ 400ml twin tube
dispenser with self-mixing nozzle for use with Fastmount
Surface Mount range. 10-minute cure, solvent-free, nontoxic, no VOCs, RoHS and REACH compliant, 12-month
shelf life. Ideal for large scale installations. Supplied with
two self-mixing nozzles for proportional mixing. Use with
SuperGroove Adhesive Gun (sold separately). Additional
self-mixing nozzles can be purchased.
CG-400MT SuperGroove™ Adhesive Self-mixing Nozzles 606.8F38.201.000*
Pack of 5 disposable self-mixing nozzles designed for
use with CG-40010 SuperGroove Adhesive™ 400ml.
NOTE: Glue not included.
CG-400G SuperGroove™ Adhesive Gun for 400ml Tube 606.8F38.201.400*
SuperGroove Adhesive™ gun designed for use with
CG-40010 SuperGroove Adhesive™ 400ml twin tube.
Robust steel construction.
Fastmount Panel
Mounting Systems
SuperGroove™ Adhesive • High strength 2-part glue bonds to most substrates
• Quick 10-minute curing
• Non-toxic
• Ideal for Fastmount SuperGroove™ surface mount clips
x.1
Download supporting documentation from the Titus Tekform website titustekform.com.au x.2
Fasteners
Fasteners
4.2
Screws
Page
Woodfast Countersunk 4.4
Hi-Lo Funnel Head 4.5
ChipFast Countersunk 4.6
SupaTop Countersunk 4.7
TapFast 4.8
CabFast 4.9
SoloFast 4.9
EuroFast 4.10
HandleFast 4.11
CombiFast 4.12
Brad Nails
C Series 4.13
C1 Series 4.13
DA13 Series 4.14
Fasteners
Product Guide
4.3
Staples
80 Series Wire Staples 4.15
90 Series Wire Staples 4.15
Accessories
Anchors 4.16
WallMate 4.16
Wall Plugs 4.16
Cover Caps 4.17
FastEdge Accessories 4.19
Conversion Tables 4.20
4.4
Fasteners
WoodFast Countersunk
Screw • Particle board screw with long and coarse thread
• Reinforced double countersunk head
• Deeper recess provides for higher torque
• 40° thread pitch
Technical details Drive type
Thread gauge
Length (mm)
Item number
Zinc plated
WoodFast Countersunk Reinforced Philips Drive No 2 3.5 13 611.8K16.235 > 013
Philips Drive No 2 3 16 611.8K16.230 > 016
Philips Drive No 2 3.5 16 611.8K16.235 > 016
Philips Drive No 2 3.5 20 611.8K16.235 > 020
Philips Drive No 2 3.5 25 611.8K16.235 > 025
Philips Drive No 2 3.5 32 611.8K16.235 > 032
Philips Drive No 2 3.5 40 611.8K16.235 > 040
Philips Drive No 2 4 16 611.8K16.240 > 016
Philips Drive No 2 4 20 611.8K16.240 > 020
Philips Drive No 2 4 25 611.8K16.240 > 025
Philips Drive No 2 4 28 611.8K16.240 > 028
Philips Drive No 2 4 32 611.8K16.240 > 032
Philips Drive No 2 4 40 611.8K16.240 > 040
Philips Drive No 2 4 45 611.8K16.240 > 045
Philips Drive No 2 4 50 611.8K16.240 > 050
Philips Drive No 2 4 57 611.8K16.240 > 057
Philips Drive No 2 4.5 65 611.8K16.245 > 065
Philips Drive No 2 5 75 611.8K16.250 > 075
Made of steel
WoodFast Countersunk Reinforced Pozidrive No 2 3.5 13 611.8K24.235 > 013
Pozidrive No 2 3 16 611.8K24.230 > 016
Pozidrive No 2 3.5 16 611.8K24.235 > 016
Pozidrive No 2 3.5 20 611.8K24.235 > 020
Pozidrive No 2 3.5 25 611.8K24.235 > 025
Pozidrive No 2 3.5 28 611.8K24.235 > 028
Pozidrive No 2 3.5 32 611.8K24.235 > 032
Pozidrive No 2 3.5 40 611.8K24.235 > 040
Pozidrive No 2 4 16 611.8K24.240 > 016
Pozidrive No 2 4 20 611.8K24.240 > 020
Pozidrive No 2 4 25 611.8K24.240 > 025
Pozidrive No 2 4 28 611.8K24.240 > 028
Pozidrive No 2 4 32 611.8K24.240 > 032
Pozidrive No 2 4 40 611.8K24.240 > 040
Pozidrive No 2 4 45 611.8K24.240 > 045
Pozidrive No 2 4 50 611.8K24.240 > 050
Pozidrive No 2 4.5 57 611.8K24.245 > 057
Made of steel
Pozidrive No 2 4.5 65 611.8K24.245 > 065
Pozidrive No 2 5 75 611.8K24.250 > 075
Length
Length
Download supporting documentation from the Titus Tekform website titustekform.com.au 4.5
Fasteners
Fasteners
Hi-Lo Funnel Head Screws • Hi-Lo™ screws have a twin thread for faster insertion
• ‘Hi’ threads and ‘Lo’ threads combine to give excellent
pull-out strength in chipboard
• Funnel head design means no countersinking
• Steel is case-hardened for extra strength
Technical details Drive type
Thread gauge
Length (mm)
Item number
Black
Nickel plated
WoodFast Countersunk
Raised Head Philips Drive No 2 3.8 16 611.8K16.338 > 016
• Perfect for use with hinges and base plates
Hi-Lo Funnel Head Philips Drive No 2 4 45 611.8F13.440 > 045
Pozidrive No 2 4 45 611.8F23.440 > 045
Made of steel
• Hi-Lo™ screws have a twin thread for faster insertion
• ‘Hi’ threads and ‘Lo’ threads combine to give
excellent pull-out strength in chipboard
• Funnel head design means no countersinking
• Steel is case-hardened for extra strength
0077
0172
0066
0071
POZIDRIV No.2 RECESS
POZIDRIV No.2 RECESS
11.5-13
Ø7.9
Ø7.6
44-45.5
53.5-55
47-48
12-14
4-5
18-19
32-33
S
6-8
5-6
1056
L
S
L
Ø5
Length
Length
4.6
Technical details Drive type
Thread gauge
Length (mm)
Item number
Zinc plated
ChipFast Countersunk Nib Philips Drive No 2 3.7 16 611.8C14.240 > 016
Philips Drive No 2 4 20 611.8C14.240 > 019
Philips Drive No 2 4 25 611.8C14.240 > 025
Philips Drive No 2 4 28 611.8C14.240 > 028
Philips Drive No 2 4 30 611.8C14.240 > 030
Philips Drive No 2 4 32 611.8C14.240 > 032
Philips Drive No 2 4 35 611.8C14.240 > 035
Philips Drive No 2 4 38 611.8C14.240 > 038
Philips Drive No 2 4 40 611.8C14.240 > 040
Philips Drive No 2 4 45 611.8C14.240 > 045
Philips Drive No 2 4 50 611.8C14.240 > 050
Philips Drive No 2 4 57 611.8C14.240 > 057
Philips Drive No 2 4 65 611.8C14.240 > 065
Philips Drive No 2 5 75 611.8C14.250 > 075
Philips Drive No 2 5 100 611.8C14.250 > 100
Made of steel
ChipFast Countersunk Nib Pozidrive No 2 4 20 611.8C24.240 > 020
Pozidrive No 2 4 25 611.8C24.240 > 025
Pozidrive No 2 4 28 611.8C24.240 > 028
Pozidrive No 2 4 30 611.8C24.240 > 030
Pozidrive No 2 4 32 611.8C24.240 > 032
Pozidrive No 2 4 35 611.8C24.240 > 035
Pozidrive No 2 4 38 611.8C24.240 > 038
Pozidrive No 2 4 40 611.8C24.240 > 040
Pozidrive No 2 4 45 611.8C24.240 > 045
Pozidrive No 2 4 50 611.8C24.240 > 050
Pozidrive No 2 4 57 611.8C24.240 > 057
Pozidrive No 2 4 65 611.8C24.240 > 065
Pozidrive No 2 5 75 611.8C24.250 > 075
Made of steel
Fasteners
ChipFast Countersunk Nib
Screws • Self-countersinking head with nibs
• 3/4 thread
• Coarse thread
• Needle screw point
Length
Length
Download supporting documentation from the Titus Tekform website titustekform.com.au 4.7
Fasteners
Fasteners
SupaTop Countersunk Nib
Head Hole Screws • Reinforced double countersunk head with
self-countersinking nibs
• Suitable for long stem head hole covers
• Deeper recess provides for higher torque
Technical details Drive type
Thread gauge
Length (mm)
Item number
Zinc plated
SupaTop Countersunk Nib Head Hole Philips Drive No 2 4.5 25 611.8H18.245 > 025
Philips Drive No 2 4.5 28 611.8H18.245 > 028
Philips Drive No 2 4.5 30 611.8H18.245 > 030
Philips Drive No 2 4.5 35 611.8H18.245 > 035
Philips Drive No 2 4.5 40 611.8H18.245 > 040
Philips Drive No 2 4.5 45 611.8H18.245 > 045
Philips Drive No 2 4.5 50 611.8H18.245 > 050
Philips Drive No 2 4.5 60 611.8H18.245 > 060
Philips Drive No 2 4.5 65 611.8H18.245 > 065
Philips Drive No 2 4.5 70 611.8H18.245 > 070
Made of steel
SupaTop Countersunk Nib Head Hole Pozidrive No 2 4.5 25 611.8H28.245 > 025
Pozidrive No 2 4.5 28 611.8H28.245 > 028
Pozidrive No 2 4.5 30 611.8H28.245 > 030
Pozidrive No 2 4.5 35 611.8H28.245 > 035
Pozidrive No 2 4.5 40 611.8H28.245 > 040
Pozidrive No 2 4.5 45 611.8H28.245 > 045
Pozidrive No 2 4.5 50 611.8H28.245 > 050
Pozidrive No 2 4.5 60 611.8H28.245 > 060
Pozidrive No 2 4.5 65 611.8H28.245 > 065
Pozidrive No 2 4.5 70 611.8H28.245 > 070
Made of steel
Length
Length
4.8
Fasteners
TapFast Screws
Technical details Drive type
Thread gauge
Length (mm)
Item number
Zinc plated
TapFast Countersunk Philips Drive No 2 3.5 13 611.8I12.235 > 013
Philips Drive No 2 3.5 16 611.8I12.235 > 016
Philips Drive No 2 3.5 32 611.8I12.235 > 032
Philips Drive No 2 4 16 611.8I12.240 > 016
Made of steel
TapFast Panhead Philips Drive No 2 3.5 16 611.8I19.235 > 016
Philips Drive No 2 4 16 611.8I19.240 > 016
Made of steel
Length
Length
Download supporting documentation from the Titus Tekform website titustekform.com.au 4.9
Fasteners
Fasteners
CabFast and
SoloFast Screws
Technical details Drive type
Thread gauge
Length (mm)
Item number
Zinc plated
CabFast Wafer Head Philips Drive No 2 4 16 611.8B17.140 > 016
Philips Drive No 2 4 28 611.8B17.140 > 028
Philips Drive No 2 4 32 611.8B17.140 > 032
Philips Drive No 2 4 50 611.8B17.140 > 050
Philips Drive No 2 4 65 611.8B17.140 > 065
Made of steel
• White button head
• 3/4 thread
• Course thread
SoloFast Connecting Pozidrive No 2 5 50 611.8G22.050 > 050
Pozidrive No 3 7 50 611.8G22.070 > 050
• Cabinet construction screw
• For pre-drilled stepped holes
Made of steel
L
Length
4.10
Fasteners
EuroFast Screws
Technical details Drive type
Screw diameter (mm)
Head diameter (mm)
Length (mm)
Item number
Nickel plated
EuroFast Screw Countersunk Pozidrive No 2 6 8 10 611.8E22.360 > 010
Countersunk Pozidrive No 2 6 8 13 611.8E22.360 > 013
Countersunk Pozidrive No 2 6.3 7 10 611.8E22.363 > 710
Countersunk Pozidrive No 2 6.3 7 13 611.8E22.363 > 713
Countersunk Pozidrive No 2 6.3 8 10 611.8E23.363 > 810
Countersunk Pozidrive No 2 6.3 8 13 611.8E23.363 > 813
Made of steel
• Hardware assembly screw
• For 5mm pre-drilled holes
Length
Diameter
Countersunk screw
Download supporting documentation from the Titus Tekform website titustekform.com.au 4.11
Fasteners
Fasteners
HandleFast Screws
Technical details Type
Thread type
Length (mm)
Item number
Zinc plated
HandleFast Trusshead Trusshead M4 10 611.8L35.245 > 010
Trusshead M4 12 611.8L35.245 > 012
Trusshead M4 16 611.8L35.245 > 016
Trusshead M4 20 611.8L35.245 > 020
Trusshead M4 22 611.8L35.245 > 022
Trusshead M4 25 611.8L35.245 > 025
Trusshead M4 32 611.8L35.245 > 032
Trusshead M4 35 611.8L35.245 > 035
Trusshead M4 38 611.8L35.245 > 038
Trusshead M4 42 611.8L35.245 > 042
Trusshead M4 45 611.8L35.245 > 045
Trusshead M4 50 611.8L35.245 > 050
• Combination head
Made of steel
Length
4.12
Fasteners
CombiFast Screws
Technical details Type
Thread type
Length (mm)
Item number
Zinc plated
Yellow zinc
CombiFast Insert Nuts Insert Nut Type, Headed 1/4 20 611.8D22.014 > 202
Insert Nut Type, Headed M6 13 611.8D22.060 > 132
Insert Nut Type, Headed M6 16 611.8D22.060 > 616
Insert Nut Type, Unheaded M6 20 611.8D22.360 > 132
Made of zinc
Length
Download supporting documentation from the Titus Tekform website titustekform.com.au 4.13
Fasteners
Fasteners
Brad Nails
Technical details Type
Thread gauge
Length (mm)
Item number
Galvanised
Brad Nails C Series Brad Nail 16G 19 611.8P19.316 > 019
Brad Nail 16G 25 611.8P19.316 > 025
Brad Nail 16G 30 611.8P19.316 > 630
Brad Nail 16G 32 611.8P19.316 > 632
Brad Nail 16G 35 611.8P19.316 > 635
Brad Nail 16G 38 611.8P19.316 > 638
Brad Nail 16G 40 611.8P19.316 > 640
Brad Nail 16G 45 611.8P19.316 > 645
Brad Nail 16G 50 611.8P19.316 > 650
Brad Nail 16G 64 611.8P19.316 > 664
Made of steel
Brad Nails C1 Series Brad Nail 18G 13 611.8P19.318 > 813
Brad Nail 18G 15 611.8P19.318 > 815
Brad Nail 18G 20 611.8P19.318 > 820
Brad Nail 18G 25 611.8P19.318 > 825
Brad Nail 18G 30 611.8P19.318 > 830
Brad Nail 18G 35 611.8P19.318 > 835
Brad Nail 18G 40 611.8P19.318 > 840
Brad Nail 18G 45 611.8P19.318 > 845
Brad Nail 18G 50 611.8P19.318 > 850
Made of steel
Length
Length
Gauge
Gauge
4.14
Fasteners
Brad Nails
Technical details Type
Thread gauge
Length (mm)
Item number
Galvanised
Brad Nails DA Angle Series Brad Nail 15G 25 611.8P19.415 > 025
Brad Nail 15G 32 611.8P19.415 > 032
Brad Nail 15G 38 611.8P19.415 > 038
Brad Nail 15G 45 611.8P19.415 > 045
Brad Nail 15G 50 611.8P19.415 > 050
Made of steel
Download supporting documentation from the Titus Tekform website titustekform.com.au 4.15
Fasteners
Fasteners
Staples
Technical details Type
Thread gauge
Length (mm)
Item number
Galvanised
Wire Staples 80 Series Staples 6 611.8P22.080 > 006
Staples 10 611.8P22.080 > 010
Staples 12 611.8P22.080 > 012
Staples 14 611.8P22.080 > 014
Made of steel
Wire Staples 90 Series Staples 18G 16 611.8P22.090 > 016
Staples 18G 25 611.8P22.090 > 025
Staples 18G 28 611.8P22.090 > 028
Staples 18G 32 611.8P22.090 > 032
Staples 18G 38 611.8P22.090 > 038
Made of steel
.
.
Length
.
Length
5.8
4.16
Fasteners
Fastener Accessories
Technical details Type
Diameter (mm)
Length (mm)
Item number
Yellow zinc
Zinc plated
Green
Red
Anchors Nylon Anchor,
Philips Drive
No. 2
6 60 611.8Q26.660 > 000
Nylon Anchor,
Philips Drive
No. 2
6 70 611.8Q26.670 > 000
Made of nylon
and steel
WallMate Wallmate for
Plasterboard,
Philips Drive
No. 2
45 611.8Q26.100 > 000
Made of zinc
Wall Plugs Wall Plug 7 50 611.8Q26.070 > 050
Wall Plug 6.5 35 611.8Q26.650 > 035
Red Spaghetti
(For fixing into
plasterboard)
Ø5.5mm
inner
Ø6mm
Drill
611.8Q26.060 > 500
Made of plastic
50m
Length
Diameter
Length
Diameter
Length
Diameter
Download supporting documentation from the Titus Tekform website titustekform.com.au 4.17
Fasteners
Technical details Type
Diameter (mm)
Finish Item number
Star Screw Caps Star Screw Cap 12 White 611.8Q24.012.001
Made of plastic
SupaTop HH Caps SupaTop HH Cap 13 White 611.8Q25.013.001
SupaTop HH Cap 13 New Antique White 611.8Q4.012.004
SupaTop HH Cap 13 Black 611.8Q4.013.004
SupaTop HH Cap 13 Folkstone Grey 611.8Q4.013.007
Made of plastic
Fasteners
Cover Caps
Diameter Diameter
4.18
Technical details Type
Diameter gauge (mm)
Thickmess (mm)
Finish Item number
FastCap FastCap 25 0.4 White 611.8Q24.225.001
FastCap 25 0.4 Black 611.8Q24.225.002
FastCap 25 0.4 Folkstone Grey 611.8Q24.225.007
FastCap 25 0.4 Antique White 611.8Q24.225.005
FastCap 18 0.4 White 611.8Q24.218.001
Made of PVC
FastCap FastCap System 6 24 x 21 0.4 White 611.8Q24.614.001
FastCap System 6 24 x 21 0.4 Antique White 611.8Q24.614.004
FastCap System 6 24 x 21 0.4 Black 611.8Q24.614.002
FastCap System 6 24 x 21 0.4 Folkstone Grey 611.8Q24.614.007
FastCap 14 0.4 Wenge 611.8Q24.214.037
FastCap 14 0.4 Beech 611.8Q24.214.028
FastCap 14 0.4 Antique White 611.8Q24.214.004
FastCap 14 0.4 Black 611.8Q24.214.002
FastCap 14 0.4 Folkstone Grey 611.8Q24.214.007
FastCap 14 0.4 Pecan 611.8Q24.214.038
FastCap 14 0.4 Mahogany 611.8Q24.214.039
FastCap 14 0.4 White 611.8Q24.214.001
Fasteners
FastCap Cover Caps
Download supporting documentation from the Titus Tekform website titustekform.com.au 4.19
Fasteners
Technical details Type
Diameter gauge (mm)
Thickmess (mm)
Finish Item number
FastCap FastCap 25 0.4 White 611.8Q24.225.001
FastCap 25 0.4 Black 611.8Q24.225.002
FastCap 25 0.4 Folkstone Grey 611.8Q24.225.007
FastCap 25 0.4 Antique White 611.8Q24.225.005
FastCap 18 0.4 White 611.8Q24.218.001
Made of PVC
FastCap FastCap System 6 24 x 21 0.4 White 611.8Q24.614.001
FastCap System 6 24 x 21 0.4 Antique White 611.8Q24.614.004
FastCap System 6 24 x 21 0.4 Black 611.8Q24.614.002
FastCap System 6 24 x 21 0.4 Folkstone Grey 611.8Q24.614.007
FastCap 14 0.4 Wenge 611.8Q24.214.037
FastCap 14 0.4 Beech 611.8Q24.214.028
FastCap 14 0.4 Antique White 611.8Q24.214.004
FastCap 14 0.4 Black 611.8Q24.214.002
FastCap 14 0.4 Folkstone Grey 611.8Q24.214.007
FastCap 14 0.4 Pecan 611.8Q24.214.038
FastCap 14 0.4 Mahogany 611.8Q24.214.039
FastCap 14 0.4 White 611.8Q24.214.001
Technical details Type
Width (mm)
Thickmess (mm)
Item number
White
Black
FastEdge Edge Tape EdgeTape 22 0.4 611.8Q24.222 > 151
EdgeTape 22 0.4 611.8Q24.222 > 761
EdgeTape 22 0.4 611.8Q24.222 > 762
Made of PVC
FastCap Speed Tape FastCap Speed
Tape 25 0.4 611.8Q24.225 > 151
FastCap Hole Punch Kit FastCap Hole
Punch Pro Kit 611.8Q24.213.000
FastCap Accuscribe Pro FastCap
Accuscribe Pro 611.8Q24.203.000
• Easily maintain a consistent scribe offset
• Ideal for scribing trim on kitchen cabinets, architectural mouldings,
counter tops, splash guards, tile and even flooring
• Fits a standard pencil or sharpie
Fasteners
FastEdge and Accessories
15m
76m
15m
76m
4.20
Fasteners
Conversion Tables
Pilot Hole Detail
Metric – Imperial Conversion
Metric – Imperial Conversion
Screw Gauge
Pilot Hole
MDF
Pilot Hole Partical
Imperial Metric Board
5 3.2 2.4mm 1.45mm
6 3.5 2.6mm 1.6mm
7 3.8 2.7mm 1.65mm
8 4.2 3.0mm 1.95mm
9 4.5 3.3mm 2.1mm
Imperial Gauge
Exact Metric
Equivalent
Nominal Metric
Equivalent
3g 2.5 2.5
4g 2.8 3.0
5g 3.2 3.0
6g 3.5 3.5
7g 3.8 4.0
8g 4.2 4.0
9g 4.5 4.5
10g 4.8 5.0
12g 5.5 5.5
14g 6.2 6.0
Imperial Metric Imperial Metric
1/32 0.8 17/32 13.5
1/16 1.6 9/16 14.3
3/32 2.4 19/32 15.1
1/8 3.2 5/8 15.9
5/32 4 21/32 16.7
3/16 4.8 11/16 17.5
7/32 5.6 23/32 18.3
1/4 6.4 3/4 19.1
9/32 7.1 25/32 19.8
5/16 8 13/16 20.6
11/32 8.7 27/32 21.4
3/8 9.5 7/8 22.2
13/32 10.3 29/32 23
7/16 11.1 15/16 23.8
15/32 11.9 31/32 24.6
1/2 12.7 1 25.4
Download supporting documentation from the Titus Tekform website titustekform.com.au x.1
General
Cabinet Hardware
Hardware
& Tools
5.2
Cabinet Hardware
Page
Cabinet Vents 5.4
Shelf Supports 5.6
Bump-ons, Protectors, Glides & Rails 5.10
Door Catches and Latches 5.13
Joiners and Connectors 5.14
Joining Plates 5.15
Brackets and Cable Entry Grommets 5.16
Clips 5.17
Castors 5.19
Bed Fittings 5.21
Furniture Locks
Cylinder Locks 5.22
Striker Plates 5.24
Central Locking Systems 5.25
General Hardware
and Tools
Product Guide
5.3
General Hardware & Tools
Waste Plates 5.26
Drill Bits 5.27
Saw Blades 5.30
Files 5.31
Stan the Stand 5.31
Tool Storage 5.31
Liquid Laminate 5.32
Repair Crayons 5.33
Filler 5.34
Safety Materials
Nuisance Dust Mask 5.35
Disposable Respirators 5.35
Disposable Ear Plugs 5.35
5.4
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.5
Cabinet Hardware
Cabinet Hardware
Cabinet Vents
• Multipurpose cabinet vents
• Ideal for appliance ventilation in cabinets and kickboards
• Two sizes and finishes available
Length (mm)
Width (mm)
Height (mm)
Cut-out (mm)
Item number
Matt Black
Aluminium
250mm Cabinet Vent 250 1.5 80 226x61.5 604.8C30.825 > 004
250 1.5 80 226x61.5 604.8C30.825 > 002
500mm Cabinet Vent 500 1.5 80 476x61.5 604.8C30.850 > 004
500 1.5 80 476x61.5 604.8C30.850 > 002
12 12
250 ±0.5
30
17
13 13
3
7.2
17
61.5
80
14.6
1.3
7.2
13
11.8 11.8
30
13
12
500 ±0.5
12
80
1.3
61.5
14.6
5.6
Cabinet Hardware
Shelf Supports
Finish
Diameter (mm)
Item number
Shelf Support, Flat Nickel Plated 5 605.8A38.119.650
Nickel Plated 7.5 605.8A38.119.750
Brass Bush 8 605.8A38.180.010
Made of steel
Shelf Support Bush Nickel Plated 7.5 605.8A38.175.651
Brass Pin 8 605.8A38.180.020
Made of steel
Shelf Support with Safety Pin 15 x 20mm Nickel Plated 5 605.8A38.214.650
Made of steel
Shelf Suppor with Safety Pin Clear 5 605.8A38.210.830
White 5 605.8A38.210.877
Made of steel and plastic
Shelf Support Nickel Plated 5 605.8A38.216.650
Made of steel
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.7
Cabinet Hardware
Cabinet Hardware
Shelf Supports
Finish
Diameter (mm)
Item number
3mm Shelf Support with Pin Nickel Plated 3 001912.847.311
Made of zinc
5mm Shelf Support with Spike Nickel Plated 5 001916.847.300
TeraBlack 5 001916.956.300
Made of steel
5mm Shelf Support Rock-in Nickel Plated 5 605.8A38.218.650
for Glass Nickel Plated 5 605.8A38.220.650
Made of steel and plastic
Centre Clips Without grommets Clear 605.8A60.104.030
With grommets Clear 605.8A60.104.020
Made of plastic
End Clips Without grommets Clear 605.8A60.106.030
With grommets Clear 605.8A60.106.020
Made of plastic
.104.030 .104.020
.106.030 .106.020
19.3
Ø5
Ø3
6
2.5
10
10
21
7.5
14.2
14.5
8
10
Ø5
5
5.8
Cabinet Hardware
Bump Ons
Thickness (mm)
Diameter (mm)
Item number
Clear Bump On 3 10 605.8A28.000.030
1.5 10 605.8A28.000.015
2.2 7.9 605.8A28.079.022
2.2 8.5 605.8A28.085.022
4.8 9.5 605.8A28.095.048
1.5 12.7 605.8A28.127.015
3.8 12.7 605.8A28.127.038
Made of plastic
White Bump On 3 12 605.8A28.000.003
Made of foam
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.9
Cabinet Hardware
Cabinet Hardware
Corner Protectors and Glides
Colour
Length (mm)
Width (mm)
Item number
Corner Block Natural 45 20 605.8A36.045.200
Natural 60 20 605.8A36.060.600
Made of plastic
Corner Protector Glide White 605.8A36.050.001
Made of PVC
Tack-on Glide Beige 16 605.A850.016.000
Beige 19 605.A850.019.000
Made of Plastic
5.10
Cabinet Hardware
Plinths & Glides
Length (mm)
Item number
Adjustable Plinth Foot Glide with Bracket and Cap 80 605.8A50.510.050
Made of zinc-plated steel
Adjustable Plinth Stem Glide 3/8 thread 50 605.8A50.538.025
5/16 thread 50 605.8A50.516.025
Made of steel and plastic
Adjustable Glide Stem, Ø28mm Base 5/16 thread 50 605.8A50.516.050
Made of steel and plastic
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.11
Cabinet Hardware
Cabinet Hardware
Wedges, Rails & Filing
Systems
Finish
Dimensions (mm)
Length (mm)
Item number
Snap-off Furniture Wedge Brown 605.A850.600.004
Made of plastic
2 x 1 Pine Rail Black 3600 605.8A10.019.361
Made of pine
Filing System Frame Chrome 273 x 390 x 420 603.8C50.149.500
Made of plastic
Filing System Runner White 2400 603.8C50.149.510
Made of plastic
5.12
Cabinet Hardware
Door Catches and Latches
Item number
Gripper Catch 605.8A36.010.010
Made of steel and plastic
Roller Catch 605.8A36.010.020
Made of zinc
Daisy Inline Catch 605.8A36.020.001
Made of plastic
Daisy Side Mount Catch 605.8A36.025.001
Made of plastic
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.13
Cabinet Hardware
Cabinet Hardware
Door Catches and Latches
Item number
White
Mini Touch Latch 605.8A36.010 > 030
Made of steel and plastic
Corna Side Bi-fold Door Catch 605.8A36.030 > 001
Made of plastic
Corna Top Mount Catch 605.8A36.030 > 002
Made of plastic
5.14
Cabinet Hardware
Door Catches
Item number
Corna Slide Door Protector Catch 605.8A36.030.003
Made of plastic
Magnetic Catch, 6kg White 605.8A36.040.061
Brown 605.8A36.040.064
Made of steel and plastic
• Includes steel striker plate
Catch Striker Plate 605.8A36.040.000
Made of steel
• To use with magnetic catch
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.15
Cabinet Hardware
Cabinet Hardware
Joiners and Connectors
Length (mm)
Width (mm)
Item number
Benchtop Connector, ∅35mm ∅35mm 65 605.8A24.035.065
∅35mm 150 605.8A24.150.065
Made of steel
Zipbolt Benchtop Connector ∅25mm 85 605.8A24.025.025
∅35mm 85 605.8A24.085.035
Made of steel
Benchtop Connector Plate, Black 118 73 605.8A24.118.730
Made of plastic
Steel Figure 8 Joiner 29 16.5 605.8A24.080.000
Made of plastic and metal
Wood Joiner Biscuits No. 0 605.8A26.021.000
No. 5 605.8A26.021.050
No. 10 605.8A26.021.010
No. 20 605.8A26.021.020
Made of MDF
5.16
Cabinet Hardware
Joining Plates
Technical Details Item number
Nickel plated
Joining Plate, 105mm 360.1222 > 054.00
Made of steel
Joining Plate, 43mm 360.1230 > 054.00*
Made of steel
Recommended number of joining plates by panel width
• Rigid and strong
• No pre-drilling
• Spacer pegs provide an even 2mm gap
• Sleek design
3
2
85
105
Ø4.5 3.5
2 Ø4.5
3.5
3
20
43
2
3
4
500 800 1200
panel width (mm)
No. of
joining plates
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.17
Cabinet Hardware
Cabinet Hardware
Brackets, Cable Entry
Grommets and Cap Holes
Finish
Length (mm)
Width (mm)
Diameter (mm)
Item number
Angle Brackets Zinc Plated 22 22 605.8A26.025.025
Zinc Plated 38 38 605.8A26.038.038
Zinc Plated 50 50 605.8A26.050.050
Made of steel
Cable Entry Grommets White 60 605.8A30.060.001
Black 60 605.8A30.060.002
Beige 60 605.8A30.060.003
Cream 60 605.8A30.060.004
Silver Grey 60 605.8A30.060.016
Dove Grey 60 605.8A30.060.007
White 80 605.8A30.080.001
Black 80 605.8A30.080.002
Beige 80 605.8A30.080.003
Grey 80 605.8A30.080.007
Silver Grey 80 605.8A30.080.016
Made of plastic
Cap Holes White 35 605.8A31.035.001
Made of plastic
5.18
Cabinet Hardware
Clips
Size (mm) Colour Item number
Table Clip 3.65 x 18.5 Gold Zinc Plated 605.8A32.365.185
Made of steel
Playground Clip 60mm Zinc Plated 605.8A32.500.000
Made of steel
Mirror Clip 4mm Clear Plastic 605.8A32.500.050
Made of plastic
Cleat Easy Clip Connector 50 x 16 x 20 White 605.8A36.056.080
Made of plastic
Door Stop with Clip White 605.8A36.010.040
Made of plastic
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.19
Cabinet Hardware
Cabinet Hardware
Castors
Wheel diameter (mm)
Item number
Castor, Unhooded with Socket 40 605.8A50.402.000
Made of plastic and steel
Castor, Hooded without Brake 42 605.8A50.422.000
Made of plastic and steel
Castor, Hooded Heavy Duty without Brake 50 605.8A50.503.000
Made of plastic and steel
Castor, Hooded Heavy Duty with Brake 50 605.8A50.504.000
Made of plastic and steel
5.20
Cabinet Hardware
Castors
Wheel diameter (mm)
Item number
Castor, Swivel, 30kg With brake 50 605.8A50.501.001
Without brake 50 605.8A50.502.001
Made of rubber
Castor, Heavy Duty Rigid, 200kg 80 605.8A50.801.002
Made of plastic
Castor, Heavy Duty Swivel, 200kg With brake 80 605.8A50.803.000
Without brake 80 605.8A50.802.002
Made of plastic
.803.000 .802.002
.501.001 .502.001
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.21
Cabinet Hardware
Cabinet Hardware
Bed Fittings
Length (mm)
Item number
Bed Bracket 120 605.8B22.192.000
Made of steel
Bed Fittings for Water Beds 123 605.8B22.190.000
Made of steel
Bed Fitting Centre Rail 70 605.8B22.191.000
Made of steel
5.22
Furniture Locks
Cylinder Locks
Lock type Key type Keyed Item number
Nickel plated
601 Rim Lock Housing with Barrel and Key Rim Barrel Alike 605.8B10.601 > 001
Rim Barrel Alike 605.8B10.601 > 002
Rim Barrel Alike 605.8B10.601 > 003
Rim Barrel Alike 605.8B10.601 > 004
Rim Barrel Alike 605.8B10.601 > 005
Rim Barrel Alike 605.8B10.601 > 006
Rim Barrel Alike 605.8B10.601 > 007
Rim Barrel To
Differ 605.8B10.601 > 000
628 Double Door Lock Housing with Barrel and Key Double
Door Rim Barrel Alike 605.8B10.628 > 001
Double
Door Rim Barrel Alike 605.8B10.628 > 002
604 Push Lock Housing with Barrel and Key Push Barrel Alike 605.8B10.604 > 001
Push Barrel To
Differ 605.8B10.604 > 000
5.23
Furniture Locks
Download supporting documentation from the Titus Tekform website titustekform.com.au
Furniture Locks
Cylinder Locks
Lock type Key type Keyed Item number
611 Push Lock Housing with Barrel and Key Cam Barrel Alike 605.8B10.611.001
Cam Barrel Alike 605.8B10.611.003
Cam Barrel Alike 605.8B10.611.004
Cam Barrel To
Differ 605.8B10.611.000
CC Series Lock with Removable Barrel, Keyed Alike Barrel Alike 605.8B10.215.000
Master key Barrel 605.8B10.205.000
Removable key
Push
Push
Push
Push
5.24
Furniture Locks
Striker Plates
Item number
Right Angle Lock Striker Plate, 30mm 605.8B10.600.030
Made of steel
Standard Z Striker Plate for Double Door 605.8B10.600.020
Made of steel
5.25
Furniture Locks
Download supporting documentation from the Titus Tekform website titustekform.com.au
Central Locking System
• Furniture lock with cylinder
• Screw-on mounting in front panel
Item number
Lock 605.8B10.000.000
One set lock consists of
Lock 1 pce
Rosette 1 pce
Key 1 pair
Accessories
Bar Guide
605.8B10.010.000
3 pcs
Locking Pin
L20005
3 pcs
Bar
L=600mmm
605.8B10.015.000
L=1200mm
L20016
1 pce
Made of steel
Ø18
600
44
32
22
32
Ø18
600
44
32
22
32
Ø18
600
44
32
22
32
600
32
6
20 21-30
min. Ø19-Ø20 min. 24
22-25mm
bar
bar guide
adjustment pin
Ø18
600
44
32
22
32
Ø18
600
44
32
22
32
Assembly Mounting and drilling details
Chipboard screws for fixing
611.8K16.240.020
7.5
20
7.5 4
16
4
5.26
Builders Hardware
Waste Plates • Cover for plumbing misplaced drilling
• Stick on around pipe to cover chips or oversized hole
Size Item number
Corna Plumbing Waste Plates Blank Sheet 210 x 295mm 605.838.210.295
40mm 605.838.040.000
50mm 605.838.050.000
65mm 605.838.065.000
Combination Pack 605.838.000.014
Made of steel
• Combination pack includes one each of
40mm, 50mm and 65mm
605.838.210.295
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.27
Builders Hardware
General Hardware & Tools
Drill Bits
Diameter (mm)
Item number
Pozidrive Drill Bit PZ2 25 605.8T10.325.000
PZ2 50 605.8T10.350.000
Power Drill Bit PH2 152 605.8T10.205.000
Philips Head Drill Bits PH1 25 605.8T10.125.000
PH2 25 605.8T10.225.000
PH1 50 605.8T10.150.000
PH2 50 605.8T10.250.000
5.28
General Hardware & Tools
Drill Bits
Diameter (mm)
Item number
Snappy Countersunk Drill Bit 1/8 605.8T60.000.018
Jobber Drill Bit 5/64 605.8T50.343.564
7/64 605.8T50.343.764
1/18 605.8T50.343.180
Tungsten Drill Bits, 57mm Right-hand 5 605.8T40.157.105
Left-hand 5 605.8T40.157.005
Right-hand 8 605.8T40.157.008
Left-hand 8 605.8T40.157.108
Right-hand 10 605.8T40.257.010
Left-hand 10 605.8T40.157.010
Right-hand 35 605.8T40.257.035
Made of tungsten carbide
Magnetic Drill Bit Holder
605.8T10.000.000
.157.105 .157.005
.157.010 .257.035
.157.108
.157.008
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.29
Builders Hardware
General Hardware & Tools
Drill Twists
Diameter (mm)
Item number
Twist Drill Bit, Imperial 1/8 605.8T50.343.018
Drill Twists, Metric 2.5 605.8T50.343.025
3 605.8T50.343.030
3.5 605.8T50.343.035
4 605.8T50.343.040
5 605.8T50.343.050
5.30
General Hardware & Tools
Saw Blades
Teeth Style Cut direction Item number
Makita Jigsaw Blades, 5 pack 2.9 B10 Upward Cut 605.8T41.010.000
2.8 B11 Upward Cut 605.8T41.011.000
4.2 B12 Upward Cut 605.8T41.012.000
2.1 B19 Downward Cut 605.8T41.019.000
Jigsaw Blades 4.0 T144D Upward Cut 605.8T40.144.000
Reversable Planer Saw Blade 605.8T35.000.050
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.31
Builders Hardware
General Hardware & Tools
General Hardware
Item number
Handy Files 605.8T70.000.000
Stan the Stand Stand 605.8T90.000.000
Extension Kit 605.8T90.005.000
PVC Covers 605.8T90.010.000
Storage Boxes Exacta Pack - Large 605.8T90.015.000
Multi 10 Pack - Small 605.8T90.020.000
Made of plastic
5.32
General Hardware & Tools
Liquid Laminate • 6 bottles in each pack
• Available in a variety of colours
• Hide small damage done to furniture
Colour Item number
Liquid Laminate, 15ml White 605.8L50.301.001
Black 605.8L50.301.002
Marl Beige 605.8L50.301.003
Antique Bhite 605.8L50.301.004
Parchment 605.8L50.301.005
Charcoal 605.8L50.301.006
Folk / Oyster Grey 605.8L50.301.007
Alabaster 605.8L50.301.008
Classic Beige 605.8L50.301.009
Cappucino 605.8L50.301.010
Mushroom Linea 605.8L50.301.011
Oyster Linea 605.8L50.301.012
Paperbark 605.8L50.301.013
Select Beech 605.8L50.301.028
Young Beech 605.8L50.301.036
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.33
General Hardware & Tools
General Hardware & Tools
Repair Crayons • 12 crayons in each pack
• Available in a variety of colours
• Hide small damage done to furniture
Colour Item number
Repair Crayons White 605.8L50.300.001
Black 605.8L50.300.002
Marl Beige 605.8L50.300.003
Antique White 605.8L50.300.004
Parchment 605.8L50.300.005
Gunmetal 605.8L50.300.006
Folk/Oyster Grey 605.8L50.300.007
Ironstone 605.8L50.300.008
Baltic Pine 605.8L50.300.010
Birch 605.8L50.300.012
Cherry 605.8L50.300.014
Dark Teak 605.8L50.300.016
Dark Walnut 605.8L50.300.018
Graceful Oak 605.8L50.300.020
Jarrah 605.8L50.300.022
Light Teak 605.8L50.300.024
Red Cherry 605.8L50.300.026
Select Beech 605.8L50.300.028
Tasmanian Oak 605.8L50.300.030
Walnut 605.8L50.300.032
Wild Birch 605.8L50.300.034
Young Beech 605.8L50.300.036
Various Colours 605.8L50.300.000
5.34
General Hardware & Tools
Filler • Water-based
• 4-in-1 Woodputty, Grainfiller, Edgefiller and Crackfiller
• Non-flammable, non-toxic and can be used to the last
gram
Size (kg) Colour Item number
Timbermate Filler 2 Ebony 605.8L50.302.202
2 Hardwood 605.8L50.302.203
8 Hardwood 605.8L50.302.803
2 Oak 605.8L50.302.230
2 Pine 605.8L50.302.210
8 Pine 605.8L50.302.810
2 Teak 605.8L50.302.224
2 Walnut 605.8L50.302.232
2 White 605.8L50.302.201
Download supporting documentation from the Titus Tekform website titustekform.com.au 5.35
Cabinet Hardware
General Hardware & Tools
Safety Materials
Item number
Nuisance Dust Mask 605.8T90.035.000
Disposable Respirator with Valve, 12 pack 605.8T90.040.000
Pro-plug Disposable Ear Plugs, Uncorded, 200 Pair 605.8T90.045.000
x.1
Download supporting documentation from the Titus Tekform website titustekform.com.au x.2
Edgebanding
Edgebanding
6.2
Edgebanding
Page
OptiBoard Edging Colour Options 6.3
Opti Laser Edgeband 6.4
Opti ABS Edgeband 6.5
Edgeband Colour Options 6.6
ABS Edgeband 6.7
PVC Edgeband 6.8
Melamine Edgeband 6.9
Edgebanding
Product Guide
6.2
Download supporting documentation from the Titus Tekform website titustekform.com.au 6.3
Edgebanding
OptiBoard Edging
Information • For Trade and Commercial use
• Colour-matched to Stefano Orlati OptiGlaz and OptiMatt
board range > see page 12.3
• Unglued ABS edging perfect to use with our range of
Keliberit adhesives
Anthracite Metallic
Ivory
Dune
Ice White
White
Cashmere
Stone Grey
Ivory
Dove Tale
Sage
OptiGlace Colour Options
OptiMatt Colour Options
Midnight Anthracite
Premium Black
Riven White Oak
Riven Red Oak
Riven Grey Oak
Walnut
OptiGrain Colour Options
6.4
Colour Finish
Width (mm)
Thickness (mm)
Item number
Opti Laser Edgeband White Matt 22 1 609.8Q04.322.300
Black Matt 22 1 609.8Q04.322.301
Ivory Matt 22 1 609.8Q04.322.302
Cashmere Matt 22 1 609.8Q04.322.303
Dove Tale Matt 22 1 609.8Q04.322.304
Anthracite Matt 22 1 609.8Q04.322.305
Ice White Gloss 22 1 609.8Q05.322.300
Super Black Gloss 22 1 609.8Q05.322.301
Ivory Gloss 22 1 609.8Q05.322.302
Cream Gloss 22 1 609.8Q05.322.303
Great White Gloss 22 1 609.8Q05.322.304
Silver Pearl Gloss 22 1 609.8Q05.322.305
Champagne Pearl Gloss 22 1 609.8Q05.322.306
Ivory Pearl Gloss 22 1 609.8Q05.322.307
Anthracite Pearl Gloss 22 1 609.8Q05.322.308
100 metres per roll
Edgebanding
Opti Laser Edgeband • For complementary doors and panels > see page
12.3
Download supporting documentation from the Titus Tekform website titustekform.com.au 6.5
Edgebanding
Colour Finish
Width (mm)
Thickness (mm)
Item number
Opti ABS Edgeband White Matt 22 1 609.8A04.322.100
Premium Black Matt 22 1 609.8A04.322.201
Ivory Matt 22 1 609.8A04.322.102
Cashmere Matt 22 1 609.8A04.322.103
Dove Tale Matt 22 1 609.8A04.322.104
Stone Grey Matt 22 1 609.8A04.322.116
Sage Matt 22 1 609.8A04.322.120
Midnight Matt 22 1 609.8A04.322.109
Anthracite Matt 22 1 609.8A04.322.105
Ice White Gloss 22 1 609.8G05.322.001
Ivory Gloss 22 1 609.8G05.322.003
Dune Gloss 22 1 609.8G05.322.031
Anthracite Metallic Gloss 22 1 609.8G05.322.009
Riven White Oak Grain 22 1 609.8A06.322.127
Riven Grey Oak Grain 22 1 609.8A06.322.128
Riven Red Oak Grain 22 1 609.8A06.322.129
Riven Walnut Grain 22 1 609.8A06.322.130
100 metres per roll
Edgebanding
Opti ABS Edgeband
6.6
Edgebanding Colour Options
New Antique White Oyster Grey
Tekform White Black
Edgebanding
Information
Download supporting documentation from the Titus Tekform website titustekform.com.au 6.7
Edgebanding
Edgebanding
ABS Edgeband • For Trade and Commercial use
• Available in ABS, Melamine and PVC
• Option of pre-glued or unglued
• Unglued edging perfect to use with our range of
Keliberit adhesives
• Textured, satin and stipple finish options
Colour Finish
Width (mm)
Thickness (mm)
Glue Item number
ABS Edgeband New Antique White Texture 21 1 Unglued 609.8A03.321.100
Black Texture 21 1 Unglued 609.8A02.321.100
New Antique White Matt 21 1 Unglued 609.8A53.521.100
Oyster Grey Matt 21 1 Unglued 609.8A62.521.100
100 metres per roll
6.8
Edgebanding
PVC Edgeband
Colour Finish
Width (mm)
Thickness (mm)
Glue Item number
PVC Edgeband Black Texture 22 2 Unglued 609.8P02.322.200
Black Texture 29 2 Unglued 609.8P02.329.200
Black Texture 38 2 Unglued 609.8P02.338.200
White Texture 21 0.4 Unglued 609.8P01.321.040
White Texture 21 1 Unglued 609.8P01.321.100
White Texture 21 1 Pre-glued 609.8P01.321.101
White Texture 22 2 Unglued 609.8P01.322.200
White Texture 29 2 Unglued 609.8P01.329.200
White Texture 38 2 Unglued 609.8P01.138.200
100 metres per roll
• For Trade and Commercial use
• Available in ABS, Melamine and PVC
• Option of pre-glued or unglued
• Unglued edging perfect to use with our range of
Kleiberit adhesives
• Textured, satin and stipple finish options
Download supporting documentation from the Titus Tekform website titustekform.com.au 6.9
Edgebanding
Edgebanding
Melamine Edgeband
Colour Finish
Width (mm)
Thickness (mm)
Glue Item number
Melamine Edgeband White Texture 21 0.32 Pre-glued 609.8M01.221.031
White Texture 21 0.32 Unglued 609.8M01.221.030
250 metre roll, unglued
150 metre roll, pre-glued
• For Trade and Commercial use
• Available in ABS, Melamine and PVC
• Option of pre-glued or unglued
• Unglued edging perfect to use with our range of
Keliberit adhesives
• Textured, satin and stipple finish options
x.1
Download supporting documentation from the Titus Tekform website titustekform.com.au x.2
Abrasives &
Abrasives & Adhesives
Adhesives
7.2
Abrasives
Page
Abrasive Rolls 7.4
Abrasive Belts 7.5
Abrasive Sheets 7.5
Abrasive Discs 7.6
Abrasive Sponges 7.7
Abrasives and Adhesives
Product Guide
7.3
Adhesives
Hotmelt Glues 7.8
Primers & Cleaning Agents 7.11
PVA Adhesives 7.12
Lacquer & Contact Adhesives 7.14
Cleaners 7.15
PUR Adhesives 7.16
Construction Adhesives & Gap Filler 7.17
Silicone Sealants 7.18
Aerosol & Epoxy Adhesives 7.20
Adhesive Tape & Accessories 7.21
7.4
Abrasives
Abrasive Rolls for Sanding • Antistatic and semi-open structure reduces the risk of
loading
• Stable and flexible e-weight paper backing
• Suitable for sanding all types of veneer and solid wood
• Ideal for sanding different materials without changing
the belt
Grit Length (m) Width (mm) Item number
Abrasive Roll for Sanding 60 25 115 601.8C15.060
80 25 115 601.8C15.080
100 25 115 601.8C15.100
120 25 115 601.8C15.120
150 25 115 601.8C15.150
180 25 115 601.8C15.180
240 25 115 601.8C15.240
320 25 115 601.8C15.320
Download supporting documentation from the Titus Tekform website titustekform.com.au 7.5
Abrasives & Adhesives
Abrasives
Abrasive Belts and Sheets
for Sanding
Grit Width (mm) Length (mm) Item number
Abrasive Belts for Sanding 40 100 610 601.8C61.040
60 100 610 601.8C61.060
80 100 610 601.8C61.080
100 100 610 601.8C61.100
120 100 610 601.8C61.120
150 100 610 601.8C61.150
180 100 610 601.8C61.180
240 100 610 601.8C61.240
Abrasive Sheets for Sanding 60 280 230 601.8C62.060
80 280 230 601.8C62.080
120 280 230 601.8C62.120
150 280 230 601.8C62.150
180 280 230 601.8C62.180
240 280 230 601.8C62.240
320 280 230 601.8C62.320
400 280 230 601.8C62.400
7.6
Abrasives
Abrasive Velcro Discs • Good stock removal rate even at low sanding pressure
• Economical sanding of all types of wood
• Suitable for sanding all types of veneer and solid wood
Grit
Diameter
(mm) Holes Item number
Abrasive Velcro Disc for Sanding 80 150 6 601.8C18.080
120 150 6 601.8C18.120
180 150 6 601.8C18.180
240 150 6 601.8C18.240
320 150 6 601.8C18.320
400 150 6 601.8C18.400
80 150 9 601.8C19.080
100 150 9 601.8C19.100
120 150 9 601.8C19.120
150 150 9 601.8C19.150
180 150 9 601.8C19.180
240 150 9 601.8C19.240
320 150 9 601.8C19.320
400 150 9 601.8C19.400
Download supporting documentation from the Titus Tekform website titustekform.com.au 7.7
Abrasives & Adhesives
Abrasives
Abrasive Sponges
Grit Length (mm) Width (mm)
Thickness
(mm) Item number
Abrasive Sponge for Sanding, Double-sided 180 97 123 12 601.8C16.060
• High degree of flexibility and adaptability
Abrasive Sponge for Sanding, Single-sided 180 115 140 5 601.8C16.180
280 115 140 5 601.8C16.280
• Medium degree of flexibility
• Fine sanding of wood in preparation for staining and
lacquering
• Intermediate sanding of primers and lacquers
• Fine cleaning of oxide layers from metallic surfaces
• For highly profiled and contoured workpieces
• Can be used wet or dry
7.8
Adhesives
Hotmelt Glue • Hotmelt adhesives react with moisture from the material
to be bonded
• For furniture production, automotive industry and paper
processing
• A wide variety of assembly bonds from profile wrapping
to edgebanding
• Use suitable machines, lines and equipment
Weight Item number
Natural
Clear
Hotmelt Glue 707.7 PUR 240g 607.8B01.707 > 720
• Reactive hotmelt with invisible glue line
• To use with high quality edgebanding on HOLZ-HER
edgebanding machines with cartridge systems
• Works well with solid wood edges, HPL edges in strips,
PVC edges, extruded/calandered, veneer edges,
Duroplastic and thermoplastic edges
• Excellent green strength
Hotmelt Glue 753.5 20kg 601.8B01.753 > 520
• To use with high speed edgebanders
• Suitable for all edging materials
• Works well with paper, veneer and melamine
• Very high green strength
Hotmelt Glue 773.0 20kg 601.8B01.773 > 020
• Bonding of polyester edges, CPL and melamine resin
edges, PVC and ABS edges (primed), uncompressed
resin-impregnated paper edges and veneer and plastic
edges on machining centres
• Excellent dosing and high strength
• Free of fillers
• Good melting properties
Hotmelt Glue 773.3 20kg 601.8B01.773 > 320
• Suited for application on CNC and regular edgebanders
• Excellent melting properties
• Outstanding high green strength
• No stringing
• Good adhesion to HPL
• Transparent, invisible glue line
• Excellent adhesion to PVC, veneer, ABS, PP and solid
wood
Download supporting documentation from the Titus Tekform website titustekform.com.au 7.9
Abrasives & Adhesives
Adhesives
Hotmelt Glue
Weight Item number
Natural
White
Hotmelt Glue 773.7 20kg 601.8B01.773 > 725
• To use with common commercial
edgebanders
• Excellent dosing
• Good melting properties
• High green strength
Hotmelt Glue 774.4 25kg 601.8B01.774 > 025
25kg 601.8B01.774 > 125
• To use with common commercial
edgebanders
• Universal use
• Suitable for pre-cooling of edges
• Good ongoing resistance
• Good melting properties
Hotmelt Glue 779.6 25kg 601.8B01.779 > 625
25kg 601.8B01.779 > 725
• To use with slow operating edgebanders
• Good flowing property from storage bin to
pressing cylinder fast re-melting
• Good water and aging resistance
Hotmelt Glue 782.1 25kg 601.8B01.782 > 125
• To use with slow operating edgebanders
• Can be used as cartridge or granules
• Good water and aging resistance
7.10
Adhesives
Hotmelt Glues
Weight Item number
Natural
White
Clear
Black
Supramelt Hotmelt Glue 782.5 20kg 601.8B01.782 > 525
• To use with slow operating edgebanders
• Can be used as cartridge or granules
• Good water and aging resistance
Hotmelt Glue 788 Series 788.0 25kg 601.8B01.788 > 125
788.0 25kg 601.8B01.788 > 225
788.7 25kg 601.8B01.788 > 025
788.7 25kg 601.8B01.788 > 725
788.3 for hand-held machine 25kg 601.8B01.788 > 325
• Excellent heat stability and bonding strength
• Designed especially for edgebanding
Supramelt Glue Slugs 782 15.3kg 601.8B01.782 > 615
15kg 601.8B01.782 > 715
15kg 601.8B01.782 > 015
• Bonding of epoxy resin edges, pre-primed ABS
edges, solid wood edges, polyester edges, preprimed PVC edges and veneer edges
Supramelt Glue Slugs 782.5 11kg 601.8B01.782 > 511
• To use with slow operating edgebanders
• Can be used as cartridge or granules
• Good water and aging resistance
• Hotmelt adhesives react with moisture from the material
to be bonded
• For furniture production, automotive industry and paper
processing
• A wide variety of assembly bonds from profile wrapping
to edgebanding
• Use suitable machines, lines and equipment
Download supporting documentation from the Titus Tekform website titustekform.com.au 7.11
Abrasives & Adhesives
Adhesives
Primers and Cleaning Agents
Size Item number
Primer 838 4.5kg 601.8A60.838.004
• Primer is an adhesive agent between
the adhesive and substrate. It improves
the bond on surfaces which are typically
difficult to bond to
• The primer application takes place in a
thin yet even coat on the entire surface
• Fields of application: for all difficult
surfaces e.g. plastic profiles for
wrapping or also metals like aluminium,
etc.
Cleaning Agent 761.7 20kg 601.8A60.761.720
• Hotmelt material to clean melting units,
hoses and application units using
reactive PUR hotmelt adhesives
• Prevents clogging of feeding systems
as well as reactive incrustation on
application units
• Renders nozzles clog free
Cleaning Agent EVA to PUR 761.0 200g 601.8A60.707.720
• Hotmelt material to clean up hose
lines and applicators using reactive
polyurethane hotmelt adhesives
• Prevents clogging of feeding systems
as well as reactive incrustation on
application units
• Renders nozzles clog free
7.12
Adhesives
PVA Adhesives • Sealants cure through cross linking of the polymers with
moisture in the air
• Used for sealing construction joints, glazing, tile work
and connecting different materials
• Very elastic with high mechanical strength
• Use in the construction, automotive and caravan
industries
Weight /
Capacity Item number
Crosslinking PVA 303.0 0.5kg 601.8B05.303.000
303.0 5kg 601.8B05.303.005
303.0 10kg 601.8B05.303.010
303.0 28kg 601.8B05.303.028
303.0 220kg 601.8B05.303.220
347.3 28kg 601.8B05.347.328
• High quality, general purpose
crosslinking PVA adhesive
Turbo Hardener 303.5 0.5kg 601.8A60.303.000
• Typically used to bond end
grain to melamine face in
the manufacture of cabinets,
cupboards and drawers
PVA 305 10kg 601.8B05.305.010
• High quality, general purpose
woodworking PVA adhesive
Download supporting documentation from the Titus Tekform website titustekform.com.au 7.13
Abrasives & Adhesives
Adhesives
PVA Adhesives
Size Item number
MDF and Timber PVA Adhesive 301 5L 601.8B25.301.005
20L 601.8B25.301.020
• A yellow, fast setting PVA used
for bonding a wide range of
timber & boards (especially
MDF)
PVA Woodworking Adhesive 302 5L 601.8B05.302.005
20L 601.8B05.302.020
• High quality, general purpose
woodworking PVA adhesive
Melamine Adhesive 303 5L 601.8B20.303.005
20L 601.8B20.303.020
• A fast setting PVA with good
moisture resistance which
attains a high bond strength
after a short setting time
Sandable PVA 304 5L 601.8B05.304.005
• A fast setting PVA with good
moisture resistance which
attains a high bond strength
after a short setting time
• Sealants cure through cross linking of the polymers with
moisture in the air
• Used for sealing construction joints, glazing, tile work
and connecting different materials
• Very elastic with high mechanical strength
• Use in the construction, automotive and caravan
industries
7.14
Adhesives
Lacquer and Contact
Adhesives
Weight Item number
Clear
Red
Super Lacquer 308.0 0.5kg 601.8A60.308.500
4.5kg 601.8A60.308.450
• For bonding wood and wood based materials
to lacquered and plastic coated surfaces
• Ideal for use in furniture manufacturing or D.I.Y
projects where wood based materials are to be
bonded to
pre-lacquered surfaces, plastic laminates and
melamine coatings
Premium Spray Contact Adhesive 200L 601.8A12.200 > 000
200L 601.8A10.200 > 000
20L 601.8A12.020 > 000
20L 601.8A10.020 > 000
• A high heat resistant, high solids adhesive used
to bond decorative laminates, auto upholstery
and many other materials
Brushable Contact Adhesive 205 20L 601.8B10.205 > 020
Download supporting documentation from the Titus Tekform website titustekform.com.au 7.15
Abrasives & Adhesives
Adhesives
Cleaners
Size Item number
ABS Edge Cleaner Plus 200L 601.8A60.006.200
20L 601.8A60.007.020
• Formulated to clean off hotmelt and
solvent based adhesives from ABS
edging without attacking the ABS edging
Contact Cleaner 101 20L 601.8A60.101.020
• Formulated for the clean up of metal
tools and spray guns used in the
application of contact adhesives
• Can be used for cleaning contact
adhesive spills and over-spray on
laminates
• Not suitable for ABS edging or
polystyrene surfaces
7.16
Adhesives
PUR Adhesive • PUR adhesives cure through cross linking with moisture
from the air and the substrate
• Extremely strong bonds that are temperature and water
resistant
• Use for especially difficult to bond materials like stone
and plastics
• Add a hardener (catalyst) for desired bonding properties
Weight Item number
PUR Adhesive 501.0 0.5kg 601.8B10.501.005
• Adhesive for water resistant
bonding according to DIN/EN
204 standards
• Humidity curing singlecomponent reaction adhesive
based on polyurethane
• Handy bottle with patented
dispensing lid
• Self cleaning
• Easy to dispense
• Precise adhesive application
• Open time approx. 25 min
• Curing time 2-3 hours
PUR Adhesive 501.6 0.5kg 601.8B10.501.605
• Adhesive for water resistant
bonding according to DIN/EN
204 standards
• Humidity curing singlecomponent reaction adhesive
based on polyurethane
• The handy bottle has a
patented dispensing lid
• Self cleaning
• Easy to dispense
• Precise adhesive application
• Open time approx. 70 min
• Curing time 1 day
Download supporting documentation from the Titus Tekform website titustekform.com.au 7.17
Abrasives & Adhesives
Adhesives
Construction Adhesives &
Gap Filler
Size Item number
Construction Adhesive 569 325g 601.8B30.569.325
• Moisture curing one component PUR
adhesive
• High water resistance D4
• High temperature resistance
• Extreme high bond strength
Construction Adhesive 300g 601.8A40.047.064
• Multi-purpose construction adhesive
ideal for bonding most common
construction materials
• Repositionable for up to 20 minutes after
application
• Effective when used on uneven floors
• Fast drying
Gap Filler 450g 601.8A40.045.001
• Acrylic based gap filler ideal for filling
gaps
• Easy to apply
• Interior/exterior
• Water clean up
7.18
Adhesives
Silicone Sealants
Finish Weight Item number
740 Bath & Kitchen Silicone Sealant Clear 300g 601.8A40.740.000
White 300g 601.8A40.740.001
• Specifically designed for use in sealing
applications involving non-porous surfaces
commonly found in bathrooms, kitchens
and laundries
• Acetic cure
• Seals water tight
770 Sanitary Silicone Sealant Clear 300g 601.8A40.770.000
White 300g 601.8A40.770.001
• Specifically designed for use in wet areas
• Primerless adhesion to the widest range of
surfaces
• Neutral cure - will not corrode metal or
concrete
• Strong adhesion
• Suitable for contact with aluminium shower
screens
• Contains fungicide that resists mould and mildew
• Permanently flexible: +/-25% joint movement capability
Download supporting documentation from the Titus Tekform website titustekform.com.au 7.19
Abrasives & Adhesives
Adhesives
Silicone Sealants
Finish Weight Item number
300 Glazing & Industrial Silicone Sealant Clear 300g 601.8A40.300.000
• Premium grade silicone sealant specifically
formulated for use in glazing and industrial
fabrication
• Fast skinning
• Low sag
• Low shrinkage
• Low VOC
790 Mirror & Metal Silicone Sealant Clear 300g 601.8A40.790.000
• Specially formulated for a range of sealing
uses
• Ideal for bonding standard silvered mirrors
to walls and other general purpose metal
bonding and sealing
• Permanently flexible: +/- 25% joint
movement capability
• Interior/exterior application
• UV and weather resistant
• Neutral cure - will not corrode metal or concrete
7.20
Adhesives
Aerosol and Epoxy
Adhesives
Size Item number
Tensorgrip L17 Aerosol Adhesive 500ml 601.8B40.017.482
• CLASS-1 FIRE RATED web spray
adhesive
• Suitable for bonding metal sheeting,
standard laminates, FRL, FRP/GRP and
plasterboard
Super Strength Epoxy Adhesive 30ml 601.8B40.020.003
• Adhesives based on resins and
hardeners reacting to create an
extremely stable thermosetting plastic
after cross linking. The strength values
of the bond can be increased through
targeted addition of heat during curing
Mitre Mate Bonding Kit 50g adhesive
200ml activator 601.8B40.024.000
• Quick, no-mess method for bonding
mitre joints in many materials
• Bonds MDF, wood, most plastics,
rubber, leather, cork and most metals
• Two part bonding kit to replace
traditional fittings such as screws
and nails
Download supporting documentation from the Titus Tekform website titustekform.com.au 7.21
Abrasives & Adhesives
Adhesives
Adhesive Tape &
Accessories
Length (m) Width Item number
Mask & Peel Protective Film 100m 601.8A80.002.100
500ml Plastic Glue Bottle and Cap Glue bottle only 601.8A80.052.000
Glue bottle cap only 601.8A80.056.000
Tap for Plastic Drum 601.8A80.060.000
Masking Tape 50 18mm 601.8A81.018.050
50 24mm 601.8A81.024.050
50 36mm 601.8A81.036.050
50 48mm 601.8A81.048.050
Packing Tape 50 48mm 601.8A80.048.050
x.1
Download supporting documentation from the Titus Tekform website titustekform.com.au x.2
Cabinet
Cabinet Handles
Handles
8.2
Stefano Orlati Handles
Page
Information 8.3
Bow Handles 8.4
Profile Handles 8.13
Provincial Handles 8.21
Recessed Handles 8.24
Square Handles 8.25
Stainless Steel Handles 8.43
Knobs 8.45
Push Open Handles 8.52
Cabinet Handles
Product Guide
8.2
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.3
Cabinet Handles
Stefano Orlati Handles
Information
Colour Finish Guide
Guide to Handle Dimensions
Length: Overall length of the handle (mm)
Centre: Screw hole to screw hole (mm)
Height: Height/Projection of handle (mm)
Width: Width of handle face (mm)
Length
Centre
Width
Height
AB Antique Bronze MBN Matt Brushed Nickel
ABS Aluminium Brushed Satin MC Matt Chrome
AC Antique Copper MW Matt White
AI Antique Iron P Pewter
BA Brushed Anthracite PA Pearl Anthracite
BC Brushed Copper PC Polished Chrome
BLKN Black Nickel PG Pearl Gold
BN Brushed Nickel S Silver
BSAT Brushed Satin Antique Tin SB Satin Brass
BSBN Brushed Satin Black Nickel SC Satin Chrome
CG Champagne Gold SG Satin Gold
CH Chrome SS Stainless Steel
CL Clear Glass TG Titanium Grey
CMB Copper Matt Black WH White
FS Foggy Silver WHC White Crackled Finish
G Gold
MB Matt Black
All colours are for representation purposes only.
For an exact colour match, ensure you request a sample.
8.4
Stefano Orlati Handles
Bow Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
122 160 180 26 18 SO-122-160 > BN
TSB 96 111 29 10 SO-TSB-96 > MB
96 111 29 10 SO-TSB-96 > BN
128 150 30 10 SO-TSB-128 > BN
96 111 29 10 SO-TSB-96 > CH
128 150 30 10 SO-TSB-128 > CH
96 111 29 10 SO-TSB-96 > MC
128 150 30 10 SO-TSB-128 > MC
BN
MB BN
CH MC
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.5
Bow Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
410 96 112 28 10 608.8J20.096.004 MB
96 112 28 10 608.8J20.096.013 MC
128 144 35 10 608.8J20.128.013 MC
96 112 28 10 608.8J20.096.003 BN
128 144 35 10 608.8J20.128.003 BN
224 288 37 10 608.8J20.224.003 BN
96 112 28 10 608.8J20.096.007 CH
128 144 35 10 608.8J20.128.007 CH
224 288 37 10 608.8J20.224.007 CH
96 112 28 10 608.8J20.096.008 SC
128 144 35 10 608.8J20.128.008 SC
224 288 37 10 608.8J20.224.008 SC
96 112 28 10 608.8J20.096.012 BLKN
128 144 35 10 608.8J20.128.012 BLKN
224 288 37 10 608.8J20.224.012 BLKN
KAVA 616 96 114 23 17 SO-616-96 > MB
128 150 27 21 SO-616-128 > MB
192 226 31 23 SO-616-192 > MB
96 114 23 17 SO-616-96 > TG
128 150 27 21 SO-616-128 > TG
192 226 31 23 SO-616-192 > TG
Stefano Orlati Handles
Bow Handles
MB MC BN
PC SC BLKN
MB TG
8.6
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
LEVO 684 K 32 25 32 SO-684-K > CMB
96 119 25 21 SO-684-96 > CMB
128 151 25 23 SO-684-128 > CMB
782 96 115 28 10 608.8F21.096.007 PC
128 148 28 10 608.8F21.128.007 PC
96 115 28 10 608.8F21.096.008 SC
128 148 28 10 608.8F21.128.008 SC
1037 128 158 29 10 SO-1037-128 > BN
128 158 29 10 SO-1037-128 > CH
128 158 29 10 SO-1037-128 > MC
Stefano Orlati Handles
Bow Handles
CMB
PC SC
CH MC
BN
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.7
Bow Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
3130 128 147 30 18 SO-3130-128 > BN
192 222 30 18 SO-3130-192 > BN
256 275 30 18 SO-3130-256 > BN
416 430 30 18 SO-3130-416 > BN
128 147 30 18 SO-3130-128 > MB
192 222 30 18 SO-3130-192 > MB
256 275 30 18 SO-3130-256 > MB
416 430 30 18 SO-3130-416 > MB
128 147 30 18 SO-3130-128 > WH
192 222 30 18 SO-3130-192 > WH
256 275 30 18 SO-3130-256 > WH
416 430 30 18 SO-3130-416 > WH
3380 128 151 28 25 SO-3380-128 > BN
160 189 28 25 SO-3380-160 > BN
224 260 33 25 SO-3380-224 > BN
320 358 33 25 SO-3380-320 > BN
Stefano Orlati Handles
Bow Handles
BN MB WH
BN
8.8
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
6329 128 167 26 22 SO-6329-128 > MB
192 231 26 22 SO-6329-192 > MB
256 295 26 22 SO-6329-256 > MB
320 359 27 22 SO-6329-320 > MB
128 167 26 22 SO-6329-128 > MBN
192 231 26 22 SO-6329-192 > MBN
256 295 26 22 SO-6329-256 > MBN
320 359 27 22 SO-6329-320 > MBN
7025 128 138 25 20 SO-7025-128 > BN
160 170 28 20 SO-7025-160 > BN
224 234 28 20 SO-7025-224 > BN
320 330 28 20 SO-7025-320 > BN
7039 128 160 25 22 608.8H20.128.003 BN
160 190 25 22 608.8H20.160.003 BN
256 286 25 22 608.8H20.256.003 BN
320 350 25 22 608.8H20.320.003 BN
Stefano Orlati Handles
Bow Handles
MB MBN
BN
BN
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.9
Bow Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
7090 96 138 36 16 608.8F17.096.003 BN
128 168 36 16 608.8F17.128.003 BN
160 200 36 16 608.8F17.160.003 BN
256 296 36 16 608.8F17.256.003 BN
320 360 36 16 608.8F17.320.003 BN
7127 128 148 29 10 608.8F16.128.003 BN
160 180 29 10 608.8F16.160.003 BN
256 276 29 10 608.8F16.256.003 BN
320 349 29 10 608.8F16.320.003 BN
7165 96 136 25 25 608.8H18.096.003 BN
128 168 25 25 608.8H18.128.003 BN
160 200 25 25 608.8H18.160.003 BN
256 296 25 25 608.8H18.256.003 BN
Stefano Orlati Handles
Bow Handles
BN
BN
BN
8.10
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
7179 96 124 24 19 608.8F18.096.003 BN
128 157 27 19 608.8F18.128.003 BN
160 189 28 19 608.8F18.160.003 BN
256 286 30 19 608.8F18.256.003 BN
DANES 7206 128 138 14 25 SO-7206-128 > MB
160 170 14 25 SO-7206-160 > MB
256 266 14 25 SO-7206-256 > MB
320 330 14 25 SO-7206-320 > MB
128 138 14 25 SO-7206-128 > PA
160 170 14 25 SO-7206-160 > PA
256 266 14 25 SO-7206-256 > PA
320 330 14 25 SO-7206-320 > PA
7229 128 170 32 12 608.8H21.128.003 BN
160 202 34 12 608.8H21.160.003 BN
320 362 32 12 608.8H21.320.003 BN
Stefano Orlati Handles
Bow Handles
BN
MB PA
BN
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.11
Bow Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
7232 128 165 28 12 608.8H19.128.003 BN
160 197 29 12 608.8H19.160.003 BN
320 344 32 12 608.8H19.320.003 BN
7236 128 248 25 16 608.8O20.128.003 BN
160 272 25 16 608.8O20.160.003 BN
320 410 25 16 608.8O20.320.003 BN
BELA 7530 16 42 24 28 SO-7530-16 > MB
64 100 24 20 SO-7530-64 > MB
96 132 24 20 SO-7530-96 > MB
128 164 24 20 SO-7530-128 > MB
224 268 24 20 SO-7530-224 > MB
16 42 24 20 SO-7530-16 > TG
64 100 24 20 SO-7530-64 > TG
96 132 24 20 SO-7530-96 > TG
128 164 24 20 SO-7530-128 > TG
224 268 24 20 SO-7530-224 > TG
Stefano Orlati Handles
Bow Handles
BN
BN
MB TG
8.12
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
9908 96 105 30 13 SO-9908-96 > BN
128 147 30 14 SO-9908-128 > BN
96 105 30 13 SO-9908-96 > CH
128 147 30 14 SO-9908-128 > CH
• Use 19mm handle screws with 16mm board only
9910 96 114 21 10 SO-9910-96 > BN
128 150 27 12 SO-9910-128 > BN
96 114 21 10 SO-9910-96 > MC
128 150 27 12 SO-9910-128 > MC
C 128 148 26 10 SO-C-128 > BN
160 180 26 10 SO-C-160 > BN
192 212 26 10 SO-C-192 > BN
128 148 26 10 SO-C-128 > FS
160 180 26 10 SO-C-160 > FS
192 212 26 10 SO-C-192 > FS
128 148 26 10 SO-C-128 > MB
160 180 26 10 SO-C-160 > MB
192 212 26 10 SO-C-192 > MB
Stefano Orlati Handles
Bow Handles
BN CH
BN MC
BN FS MB
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.13
Bow Handles
Length (mm)
Height (mm)
Depth (mm)
Item number
Finish
CAPRI-J 3600 58.5 26 608.8U10.360.001 FS
3600 58.5 26 608.8U10.360.007 CH
3600 58.5 26 608.8U10.360.010 MB
3600 58.5 26 608.8U10.360.011 MW
3600 58.5 26 608.8U10.360.013 TG
3000 58.5 26 608.8U10.360.015 G
• End caps and brackets ordered separately
Quoted dimensions consider that the CAPRI profile will
have a 1mm overhang. Increase measurements by 1mm
for applications where the CAPRI profile should be flush
with the cabinet sides.
Stefano Orlati Handles
Profile Handles • Create handleless openings for doors and top
drawers
• Horizontal mounting
• Available in six on-trend finishes
FS CH MB
MW TG G
58.5
58.5
8.14
Length (mm)
Height (mm)
Depth (mm)
Item number
Finish
CAPRI-C 3600 73.5 26 608.8U08.360.001 FS
3600 73.5 26 608.8U08.360.007 CH
3600 73.5 26 608.8U08.360.010 MB
3600 73.5 26 608.8U08.360.011 MW
3600 73.5 26 608.8U08.360.013 TG
3000 73.5 26 608.8U08.360.015 G
•
Available in six on-trend finishes
•
End caps and brackets ordered separately
Quoted dimensions consider that the CAPRI profile will
have a 1mm overhang. Increase measurements by 1mm
for applications where the CAPRI profile should be flush
with the cabinet sides.
CAPRI-C LED 3600 76 24 608.8U09.360.001 FS
3600 76 24 608.8U09.360.007 CH
3600 76 24 608.8U09.360.010 MB
3600 76 24 608.8U09.360.011 MW
3600 76 24 608.8U09.360.013 TG
•
Integrated LED profile & strip
Quoted dimensions consider that the CAPRI profile will
have a 1mm overhang. Increase measurements by 1mm
for applications where the CAPRI profile should be flush
with the cabinet sides.
Stefano Orlati Handles
Profile Handles • Create handleless openings for drawers
• Horizontal mounting
FS CH MB
MW TG G
FS CH MB
MW TG
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.15
Profile Handles
Stefano Orlati Handles
Profile Handles
Length (mm)
Height (mm)
Depth (mm)
Item number
Finish
CAPRI-Y 2400 66 47 608.8U16.360.001 FS
2400 66 47 608.8U16.360.007 CH
2400 66 47 608.8U16.360.010 MB
2400 66 47 608.8U16.360.011 MW
2400 66 47 608.8U16.360.013 TG
2400 66 47 608.8U16.360.015 G
•
Create handleless openings for tower cabinets
• Vertical mounting between cabinets
CAPRI-R 3600 19 34.3 608.8U14.360.001 FS
3600 19 34.3 608.8U14.360.007 CH
3600 19 34.3 608.8U14.360.010 MB
3600 19 34.3 608.8U14.360.011 MW
3600 19 34.3 608.8U14.360.013 TG
3000 19 34.3 608.8U14.360.015 G
• Create handleless openings for wall cabinets
• Horizontal mounting
Note: Can be used on 16mm and 18mm board.
Dimensions are still 9mm from top to top of cutout
Side Profile
• Available in six on-trend finishes
Side Profile
FS CH MB
MW TG G
FS CH MB
MW TG G
8.16
Stefano Orlati Handles
Profile Handles
Handing
Length (mm)
Height (mm)
Depth (mm)
Item number
Finish
CAPRI-N 3600 18 10.5 608.8U12.360.001 FS
3600 18 10.5 608.8U12.360.007 CH
3600 18 10.5 608.8U12.360.010 MB
3600 18 10.5 608.8U12.360.011 MW
3600 18 10.5 608.8U12.360.013 TG
3000 18 10.5 608.8U12.360.015 G
• Shelf edge protection
• Horizontal mounting
•
Available in six on-trend finishes
Note: N Profile only suits 16mm board
CAPRI Profile Mounting Bracket Universal 608.8U19.070.001
• Universal mounting bracket for CAPRI Profile range
• Simple 3 step mounting process
Side Profile
FS CH MB
MW TG G
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.17
Profile Handles
Handing
Item number
Finish
CAPRI-J End Caps Left 608.8U17.056.001 FS
Right 608.8U17.057.001 FS
Left 608.8U17.056.007 CH
Right 608.8U17.057.007 CH
Left 608.8U17.056.010 MB
Right 608.8U17.057.010 MB
Left 608.8U17.056.011 MW
Right 608.8U17.057.011 MW
Left 608.8U17.056.013 TG
Right 608.8U17.057.013 TG
Left 608.8U17.056.015 G
Right 608.8U17.057.015 G
CAPRI-C End Caps Universal 608.8U17.073.001 FS
Universal 608.8U17.073.007 CH
Universal 608.8U17.073.010 MB
Universal 608.8U17.073.011 MW
Universal 608.8U17.073.013 TG
Universal 608.8U17.073.015 G
Stefano Orlati Handles
Profile Handles
FS CH MB
MW TG G
FS CH MB
MW TG G
8.18
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
548 128 170 26 17 SO-548-128 > MB
192 235 26 17 SO-548-192 > MB
128 170 26 17 SO-548-128 > ABS
192 235 26 17 SO-548-192 > ABS
Stefano Orlati Handles
Profile Handles
MB ABS
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.19
Profile Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
VODA 2163 25 40 18 45 SO-2163-40 > BA
80 100 18 45 SO-2163-100 > BA
160 200 18 45 SO-2163-200 > BA
2x 128 300 18 45 SO-2163-300 > BA
2x 160 350 18 45 SO-2163-350 > BA
25 40 18 45 SO-2163-40 > BC
80 100 18 45 SO-2163-100 > BC
160 200 18 45 SO-2163-200 > BC
2x 128 300 18 45 SO-2163-300 > BC
2x 160 350 18 45 SO-2163-350 > BC
25 40 18 45 SO-2163-40 > BN
80 100 18 45 SO-2163-100 > BN
160 200 18 45 SO-2163-200 > BN
2x 128 300 18 45 SO-2163-300 > BN
2x 160 350 18 45 SO-2163-350 > BN
25 40 18 45 SO-2163-40 > MB
80 100 18 45 SO-2163-100 > MB
160 200 18 45 SO-2163-200 > MB
2x 128 300 18 45 SO-2163-300 > MB
2x 160 350 18 45 SO-2163-350 > MB
25 40 18 45 SO-2163-40 > MW
80 100 18 45 SO-2163-100 > MW
160 200 18 45 SO-2163-200 > MW
2x 128 300 18 45 SO-2163-300 > MW
2x 160 350 18 45 SO-2163-350 > MW
25 40 18 45 SO-2163-40 > SB
80 100 18 45 SO-2163-100 > SB
160 200 18 45 SO-2163-200 > SB
2x 128 300 18 45 SO-2163-300 > SB
2x 160 350 18 45 SO-2163-350 > SB
Stefano Orlati Handles
Profile Handles
BN MB MW
BC SB BA
8.20
Stefano Orlati Handles
Profile Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
7130 20 40 25 35 608.8C17.020.010 MB
80 100 25 35 608.8C17.080.010 MB
160 180 25 35 608.8C17.160.010 MB
260 280 25 35 608.8C17.260.010 MB
20 40 25 35 608.8C17.020.003 BN
80 100 25 35 608.8C17.080.003 BN
160 180 25 35 608.8C17.160.003 BN
260 280 25 35 608.8C17.260.003 BN
R156 64 90 17 41 SO-R156-64 > ABS
160 190 17 41 SO-R156-160 > ABS
160 190 17 41 SO-R156-160> FS
•
Mounts on top of panel edge
PESARO PULL 200 18 36 SO-PP-200 > ABS
2 screw holes - 40mm from edge
400 18 36 SO-PP-400 > ABS
3 screw holes - 100mm between each hole & edge
1250 18 26 SO-PP-1250 > ABS
Without holes drilled
•
Mounts on top of panel edge
8mm
41mm
4mm
2mm
17mm
Side Profile
36mm
10mm
18mm
1.5mm
2mm
Side Profile
BN MB
ABS
FS ABS
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.21
Profile Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
1186 96 132 29 14 SO-1186-96 > BSAT
160 204 29 16 SO-1186-160 > BSAT
96 132 29 14 SO-1186-96 > BSBN
160 204 29 16 SO-1186-160 > BSBN
Complimentary knob 1186K page > 53
1208 96 135 31 34 SO-1208-96 > BSAT
96 135 31 34 SO-1208-96 > BSBN
Complimentary knob 1186K page > 53
3440 128 150 33 18 SO-3440-128 > MB
160 182 33 18 SO-3440-160 > MB
224 246 33 18 SO-3440-224 > MB
320 342 33 18 SO-3440-320 > MB
128 150 33 18 SO-3440-128 > BN
160 182 33 18 SO-3440-160 > BN
224 246 33 18 SO-3440-224 > BN
320 342 33 18 SO-3440-320 > BN
128 150 33 18 SO-3440-128 > BSBN
160 182 33 18 SO-3440-160 > BSBN
224 246 33 18 SO-3440-224 > BSBN
320 342 33 18 SO-3440-320 > BSBN
Complimentary knob 3440K page > 54
Stefano Orlati Handles
Provincial Handles
BSAT BSBN
BSAT BSBN
MB BN BSBN
8.22
Stefano Orlati Handles
Provincial Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
6212 128 144 34 16 SO-6212-128 > BN
160 177 34 16 SO-6212-160 > BN
256 274 34 16 SO-6212-256 > BN
128 144 34 16 SO-6212-128 > CH
160 177 34 16 SO-6212-160 > CH
256 274 34 16 SO-6212-256 > CH
128 144 34 16 SO-6212-128 > MB
160 177 34 16 SO-6212-160 > MB
256 274 34 16 SO-6212-256 > MB
8391 160 180 32 49 SO-8391-160 > P
Complementary knob 3801 page > 55
Complementary knob 8393 page > 56
8392 128 188 28 21 SO-8392-128 > P
Complementary knob 3801 page > 55
Complementary knob 8393 page > 56
MB BN
CH
P
P
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.23
Provincial Handles
Stefano Orlati Handles
Provincial Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
8407 64 90 23 34 SO-8407-64 > AB
64 90 23 34 SO-8407-64 > BN
64 90 23 34 SO-8407-64 > CH
64 90 23 34 SO-8407-64 > MB
Complementary knob 8741 page > 56
8658 96 132 25 16 SO-8658-96 > AB
96 132 25 16 SO-8658-96 > BN
96 132 25 16 SO-8658-96 > CH
96 132 25 16 SO-8658-96 > MB
Complementary knob 8741 page > 56
C15 128 150 40 23 SO-C15-128 > WHC/P
Complementary knobs C10 and C14 page > 57
AB BN
CH MB
AB BN
CH MB
WHC/P
8.24
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
709 / 7057 128 138 13 30 SO-709-128 > S
128 138 13 30 SO-7057-128 > MB
128 138 13 30 SO-7057-128 > MW
Suits minimum 16mm board
Recess depth 10mm
Stefano Orlati Handles
Recessed Handles
S MB MW
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.25
Square Handles
Stefano Orlati Handles
Square Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
116 128 159 29 15 SO-116-128 > BN
160 190 29 15 SO-116-160 > BN
SVETLO 170 128 138 28 18 SO-170-128 > MB
160 170 28 18 SO-170-160 > MB
192 202 29 18 SO-170-192 > MB
288 128 141 36 16 SO-288-128 > BN
160 173 36 16 SO-288-160 > BN
224 237 36 16 SO-288-224 > BN
288 301 36 16 SO-288-288 > BN
BN
MB
BN
8.26
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
305 128 145 25 12 SO-305-128 > AC
160 177 25 12 SO-305-160 > AC
224 241 27 12 SO-305-224 > AC
320 337 27 12 SO-305-320 > AC
128 145 25 12 SO-305-128 > AI
160 177 25 12 SO-305-160 > AI
224 241 27 12 SO-305-224 > AI
320 337 27 12 SO-305-320 > AI
128 145 25 12 SO-305-128 > BN
160 177 25 12 SO-305-160 > BN
224 241 27 12 SO-305-224 > BN
320 337 27 12 SO-305-320 > BN
MALI 422 64 76 30 18 SO-422-64 > BN
160 173 30 18 SO-422-160 > BN
320 333 30 18 SO-422-320 > BN
64 76 30 18 SO-422-64 > MB
160 173 30 18 SO-422-160 > MB
320 333 30 18 SO-422-320 > MB
64 76 30 18 SO-422-64 > TG
160 173 30 18 SO-422-160 > TG
320 333 30 18 SO-422-320 > TG
Stefano Orlati Handles
Square Handles
AC
BN AI
BN MB TG
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.27
Square Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
CISTA 432 64 120 32 23 SO-432-64 > PA
160 210 32 23 SO-432-160 > PA
320 355 32 23 SO-432-320 > PA
VELIK 454 160 168 40 16 SO-454-160 > MB
320 326 40 16 SO-454-320 > MB
160 168 40 16 SO-454-160 > MBN
320 326 40 16 SO-454-320 > MBN
160 168 40 16 SO-454-160 > PA
320 326 40 16 SO-454-320 > PA
160 168 40 16 SO-454-160 > PG
320 326 40 16 SO-454-320 > PG
VILA 663 16 42 26 20 SO-663-16 > CG
128 157 37 18 SO-663-128 > CG
16 42 26 20 SO-663-16 > MB
128 157 37 18 SO-663-128 > MB
16 42 26 18 SO-663-16 > TG
128 42 37 20 SO-663-128 > TG
Stefano Orlati Handles
Square Handles
PA
PG MBN
PA MB
CG MB TG
8.28
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
800 96 106 32 9.5 608.8M24.096.007 PC
128 138 32 9.5 608.8M24.128.007 PC
160 170 32 9.5 608.8M24.160.007 PC
96 106 32 9.5 608.8M24.096.008 SC
128 138 32 9.5 608.8M24.128.008 SC
160 170 32 9.5 608.8M24.160.008 SC
NARAVA 804 K 25 25 22 SO-804-K > MB
128 145 29 20 SO-804-128 > MB
192 210 29 21 SO-804-192 > MB
320 331 23 30 SO-804-320 > MB
K 25 25 22 SO-804-K > MBN
128 145 29 20 SO-804-128 > MBN
192 210 29 21 SO-804-192 > MBN
320 331 23 30 SO-804-320 > MBN
K 25 25 22 SO-804-K > TG
128 145 29 20 SO-804-128 > TG
192 210 29 21 SO-804-192 > TG
320 331 23 30 SO-804-320 > TG
Stefano Orlati Handles
Square Handles
SC PC
MBN MB TG
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.29
Square Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
PRISTOP 815 128 141 31 15 SO-815-128 > MB
192 205 31 15 SO-815-192 > MB
320 333 31 15 SO-815-320 > MB
128 141 31 15 SO-815-128 > PA
192 205 31 15 SO-815-192 > PA
320 333 31 15 SO-815-320 > PA
128 141 31 15 SO-815-128 > SG
192 205 31 15 SO-815-192 > SG
320 333 31 15 SO-815-320 > SG
BARVA 1061 160 168 27 13 SO-1061-160 > MB
Stefano Orlati Handles
Square Handles
SG MB PA
MB
8.30
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
1092 96 102 27 11 SO-1092-96 > MB
128 134 27 11 SO-1092-128 > MB
160 166 27 11 SO-1092-160 > MB
224 230 27 11 SO-1092-224 > MB
288 294 27 11 SO-1092-288 > MB
320 326 27 11 SO-1092-320 > MB
96 102 27 11 SO-1092-96 > BN
128 134 27 11 SO-1092-128 > BN
160 166 27 11 SO-1092-160 > BN
224 230 27 11 SO-1092-224 > BN
288 294 27 11 SO-1092-288 > BN
320 326 27 11 SO-1092-320 > BN
96 102 27 11 SO-1092-96 > CH
128 134 27 11 SO-1092-128 > CH
160 166 27 11 SO-1092-160 > CH
224 230 27 11 SO-1092-224 > CH
288 294 27 11 SO-1092-288 > CH
320 326 27 11 SO-1092-320 > CH
96 102 27 11 SO-1092-96 > MC
128 134 27 11 SO-1092-128 > MC
160 166 27 11 SO-1092-160 > MC
224 230 27 11 SO-1092-224 > MC
288 294 27 11 SO-1092-288 > MC
320 326 27 11 SO-1092-320 > MC
Stefano Orlati Handles
Square Handles
BN CH
MB MC
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.31
Square Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
VESELO 1399 160 193 37 10 SO-1399-160 > MB
OKUS 1431 96 121 25 25 SO-1431-96 > MB
160 185 26 25 SO-1431-160 > MB
320 345 25 25 SO-1431-320 > MB
1745 128 137 28 21 SO-1745-128 > BN
192 201 28 21 SO-1745-192 > BN
256 265 28 21 SO-1745-256 > BN
Stefano Orlati Handles
Square Handles
MB
MB
BN
8.32
Stefano Orlati Handles
Square Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
3061 128 158 25 20 SO-3061-128 > MC
192 226 27 24 SO-3061-192 > MC
3064 128 157 27 8 SO-3064-128 > SG
160 192 27 8 SO-3064-160 > SG
320 355 27 8 SO-3064-320 > SG
96 121 27 8 SO-3064-96 > MC
128 157 27 8 SO-3064-128 > MC
160 192 27 8 SO-3064-160 > MC
192 224 27 8 SO-3064-192 > MC
240 273 27 8 SO-3064-240 > MC
320 355 27 8 SO-3064-320 > MC
128 157 27 8 SO-3064-128 > MW
160 192 27 8 SO-3064-160 > MW
320 355 27 8 SO-3064-320 > MW
MC
MC
SG MW
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.33
Square Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
3163 96 121 25 8 608.8J18.096.010 MB
128 161 25 8 608.8J18.128.010 MB
160 193 25 8 608.8J18.160.010 MB
192 225 25 8 608.8J18.192.010 MB
240 273 25 8 608.8J18.240.010 MB
320 350 30 8 608.8J18.320.010 MB
96 121 25 8 608.8J18.128.003 BN
128 161 25 8 608.8J18.160.003 BN
160 193 25 8 608.8J18.192.003 BN
192 225 25 8 608.8J18.240.003 BN
240 273 25 8 608.8J18.240.003 BN
320 350 30 8 608.8J18.320.003 BN
3447 160 192 22 22 608.8O18.160.010 MB
128 158 20 22 608.8O18.128.003 BN
160 192 22 22 608.8O18.160.003 BN
192 226 25 22 608.8O18.192.003 BN
Stefano Orlati Handles
Square Handles
BN MB
BN MB
8.34
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
4062 96 104 28.3 8.3 SO-4062-96 > MB
128 136 28.3 8.3 SO-4062-128 > MB
160 168 28.3 8.3 SO-4062-160 > MB
192 200 28.3 8.3 SO-4062-192 > MB
256 264 28.3 8.3 SO-4062-256 > MB
320 328 28.3 8.3 SO-4062-320 > MB
416 424 28.3 8.3 SO-4062-416 > MB
96 104 28.3 8.3 SO-4062-96 > BN
128 136 28.3 8.3 SO-4062-128 > BN
160 168 28.3 8.3 SO-4062-160 > BN
192 200 28.3 8.3 SO-4062-192 > BN
256 264 28.3 8.3 SO-4062-256 > BN
320 328 28.3 8.3 SO-4062-320 > BN
416 424 28.3 8.3 SO-4062-416 > BN
96 104 28.3 8.3 SO-4062-96 > TG
128 136 28.3 8.3 SO-4062-128 > TG
160 168 28.3 8.3 SO-4062-160 > TG
192 200 28.3 8.3 SO-4062-192 > TG
256 264 28.3 8.3 SO-4062-256 > TG
320 328 28.3 8.3 SO-4062-320 > TG
416 424 28.3 8.3 SO-4062-416 > TG
Stefano Orlati Handles
Square Handles
BN MB TG
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.35
Square Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
5012 96 156 30 12 608.8D10.096.003 BN
128 188 30 12 608.8D10.128.003 BN
160 220 30 12 608.8D10.160.003 BN
256 316 30 12 608.8D10.256.003 BN
320 380 30 12 608.8D10.320.003 BN
5075 128 142 22 14 SO-5075-128 > MBN
192 206 22 14 SO-5075-192 > MBN
320 334 22 14 SO-5075-320 > MBN
128 142 22 14 SO-5075-128 > CH
192 206 22 14 SO-5075-192 > CH
320 334 22 14 SO-5075-320 > CH
128 142 22 14 SO-5075-128 > SB
192 206 22 14 SO-5075-192 > SB
320 334 22 14 SO-5075-320 > SB
128 142 22 14 SO-5075-128 > TG
192 206 22 14 SO-5075-192 > TG
320 334 22 14 SO-5075-320 > TG
Stefano Orlati Handles
Square Handles
BN
CH SB
TG MBN
8.36
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
5076 128 138 29 10 SO-5076-128 > CH
192 202 29 10 SO-5076-192 > CH
256 266 29 10 SO-5076-256 > CH
320 330 29 10 SO-5076-320 > CH
128 138 29 10 SO-5076-128 > MB
192 202 29 10 SO-5076-192 > MB
256 266 29 10 SO-5076-256 > MB
320 330 29 10 SO-5076-320 > MB
128 138 29 10 SO-5076-128 > BN
192 202 29 10 SO-5076-192 > BN
256 266 29 10 SO-5076-256 > BN
320 330 29 10 SO-5076-320 > BN
7011 96 102 26 12 608.8R16.096.007 PC
128 134 26 12 608.8R16.128.007 PC
160 166 26 12 608.8R16.160.007 PC
256 262 26 12 608.8R16.256.007 PC
96 102 26 12 608.8R16.096.003 BN
128 134 26 12 608.8R16.128.003 BN
160 166 26 12 608.8R16.160.003 BN
256 262 26 12 608.8R16.256.003 BN
320 326 26 12 608.8R16.320.003 BN
448 454 26 12 608.8R16.448.003 BN
Stefano Orlati Handles
Square Handles
BN MB CH
BN PC
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.37
Square Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
7120 128 140 31 15 608.8A16.128.003 BN
160 172 31 15 608.8A16.160.003 BN
256 268 31 15 608.8A16.256.003 BN
7128 128 178 32 11 608.8B17.128.003 BN
160 210 32 11 608.8B17.160.003 BN
256 306 32 11 608.8B17.256.003 BN
320 370 32 11 608.8B17.320.003 BN
7202 96 111 28 12 608.8E18.096.016 BA
128 144 28 12 608.8E18.128.016 BA
160 176 28 12 608.8E18.160.016 BA
256 272 28 12 608.8E18.256.016 BA
320 337 28 12 608.8E18.320.016 BA
96 111 28 12 608.8E18.096.003 BN
128 144 28 12 608.8E18.128.003 BN
160 176 28 12 608.8E18.160.003 BN
256 272 28 12 608.8E18.256.003 BN
320 337 28 12 608.8E18.320.003 BN
96 111 28 12 608.8E18.096.017 SG
128 144 28 12 608.8E18.128.017 SG
160 176 28 12 608.8E18.160.017 SG
256 272 28 12 608.8E18.256.017 SG
320 337 28 12 608.8E18.320.017 SG
Stefano Orlati Handles
Square Handles
BN
BN
BA
BN SG
8.38
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
SIVA 7292 128 155 31 22 SO-7292-128 > AI
192 220 31 22 SO-7292-192 > AI
224 255 31 22 SO-7292-224 > AI
128 155 31 22 SO-7292-128 > TG
192 220 31 22 SO-7292-192 > TG
224 255 31 22 SO-7292-224 > TG
MEHKO 7298 128 144 37 16 SO-7298-128 > MB
160 176 37 16 SO-7298-160 > MB
224 240 37 18 SO-7298-224 > MB
320 340 37 20 SO-7298-320 > MB
128 144 37 16 SO-7298-128 > TG
160 176 37 16 SO-7298-160 > TG
224 240 37 18 SO-7298-224 > TG
320 340 37 20 SO-7298-320 > TG
Stefano Orlati Handles
Square Handles
AI TG
MB TG
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.39
Square Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
ROKA 7304 K 68 33 17 SO-7304-K > BN
128 138 33 14 SO-7304-128 > BN
160 170 33 14 SO-7304-160 > BN
256 270 33 14 SO-7304-256 > BN
320 330 33 14 SO-7304-320 > BN
K 68 33 17 SO-7304-K > MB
128 138 33 14 SO-7304-128 > MB
160 170 33 14 SO-7304-160 > MB
256 270 33 14 SO-7304-256 > MB
320 330 33 14 SO-7304-320 > MB
K 68 33 17 SO-7304-K > SG
128 138 33 14 SO-7304-128 > SG
160 170 33 14 SO-7304-160 > SG
256 270 33 14 SO-7304-256 > SG
320 330 33 14 SO-7304-320 > SG
VIDIK 7667 96 115 19 32 SO-7667-96 > MB
128 146 19 32 SO-7667-128 > MB
192 210 19 32 SO-7667-192 > MB
96 115 19 32 SO-7667-96 > SG
128 146 19 32 SO-7667-128 > SG
192 210 19 32 SO-7667-192 > SG
96 115 19 32 SO-7667-96 > TG
128 146 19 32 SO-7667-128 > TG
192 210 19 32 SO-7667-192 > TG
Stefano Orlati Handles
Square Handles
MB
BN SG
MB
TG SG
8.40
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
7092/08 96 104 27 8 608.8B18.096.003 BN
128 136 27 8 608.8B18.128.003 BN
160 168 27 8 608.8B18.160.003 BN
256 264 27 8 608.8B18.256.003 BN
320 328 27 8 608.8B18.320.003 BN
7092/12 96 106 30 12 608.8B19.096.003 BN
128 138 30 12 608.8B19.128.003 BN
160 170 30 12 608.8B19.160.003 BN
256 266 30 12 608.8B19.256.003 BN
320 330 30 12 608.8B19.320.003 BN
Stefano Orlati Handles
Square Handles
BN
BN
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.41
Stainless Steel Handles
Stefano Orlati Handles
Square Handles
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
A 128 135 30 12 SO-A-128 > MB
160 167 30 12 SO-A-160 > MB
224 231 30 12 SO-A-224 > MB
320 327 30 12 SO-A-320 > MB
128 135 30 12 SO-A-128 > BN
160 167 30 12 SO-A-160 > BN
224 231 30 12 SO-A-224 > BN
320 327 30 12 SO-A-320 > BN
128 135 30 12 SO-A-128 > FS
160 167 30 12 SO-A-160 > FS
224 231 30 12 SO-A-224 > FS
320 327 30 12 SO-A-320 > FS
B 128 135 30 16 SO-B-128 > MB
160 167 30 16 SO-B-160 > MB
224 231 30 16 SO-B-224 > MB
320 327 30 16 SO-B-320 > MB
128 135 30 16 SO-B-128 > BN
160 167 30 16 SO-B-160 > BN
224 231 30 16 SO-B-224 > BN
320 327 30 16 SO-B-320 > BN
128 135 30 16 SO-B-128 > FS
160 167 30 16 SO-B-160 > FS
224 231 30 16 SO-B-224 > FS
320 327 30 16 SO-B-320 > FS
BN MB FS
BN MB FS
8.42
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
D 128 138 37 10 SO-D-128 > MC
96 106 37 10 SO-D-96 > BN
128 138 37 10 SO-D-128 > BN
Stefano Orlati Handles
Square Handles
BN MC
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.43
Cabinet Knobs
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
909 128 142 40 14 SO-909-128 > SS
160 174 40 14 SO-909-160 > SS
224 238 40 14 SO-909-224 > SS
320 334 40 14 SO-909-320 > SS
480 494 40 14 SO-909-480 > SS
6820 128 136 31 21 SO-6820-128 > SS
160 168 31 21 SO-6820-160 > SS
224 232 31 21 SO-6820-224 > SS
320 328 31 21 SO-6820-320 > SS
8513 128 150 40 13 SO-8513-128 > SS
160 182 40 13 SO-8513-160 > SS
192 214 40 13 SO-8513-192 > SS
224 246 40 13 SO-8513-224 > SS
352 374 40 13 SO-8513-352 > SS
Stefano Orlati Handles
Stainless Steel Handles
SS
SS
SS
8.44
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
8721 128 138 33 19 SO-8721-128 > SS
160 170 33 19 SO-8721-160 > SS
192 202 33 19 SO-8721-192 > SS
224 234 33 19 SO-8721-224 > SS
320 330 33 19 SO-8721-320 > SS
448 458 33 19 SO-8721-448 > SS
ARC 128 148 31 10 SO-ARC-128 > SS
160 185 31 10 SO-ARC-160> SS
224 260 31 10 SO-ARC-224 > SS
288 336 31 10 SO-ARC-288 > SS
SSD 128 138 33 10 SO-SSD-128 > SS
160 170 33 10 SO-SSD-160 > SS
192 202 33 10 SO-SSD-192 > SS
288 298 33 10 SO-SSD-288 > SS
352 362 33 10 SO-SSD-352 > SS
448 458 33 10 SO-SSD-448 > SS
SSTB 96 136 34 12 SO-SSTB-96 > SS
128 168 34 12 SO-SSTB-128 > SS
160 200 34 12 SO-SSTB-160 > SS
192 232 34 12 SO-SSTB-192 > SS
288 328 34 12 SO-SSTB-288 > SS
Stefano Orlati Handles
Stainless Steel Handles
SS
SS
SS
SS
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.45
Cabinet Knobs
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
MODRA 278 32 23 40 49 SO-278-32 > BN
32 23 40 49 SO-278-32 > MB
32 23 40 49 SO-278-32 > TG
TEMEN 415 K 76 46 76 SO-415-K > BN
K 76 46 76 SO-415-K > CH
K 76 46 76 SO-415-K > MB
K 76 46 76 SO-415-K > TG
VELIK-R 454-R K 40 40 40 SO-454R-K > MB
K 40 40 40 SO-454R-K > MBN
K 40 40 40 SO-454R-K > PA
K 40 40 40 SO-454R-K > PG
VELIK-T 454-T K 40 37 14 SO-454T-K > MB
K 40 37 14 SO-454T-K > MBN
K 40 37 14 SO-454T-K > PA
K 40 37 14 SO-454T-K > PG
Stefano Orlati Handles
Knobs
BN MB TG
BN MB TG CH
MBN MB PA PG
MBN MB PA PG
8.46
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
POLT 592 K 40 40 40 SO-592-K > CH
K 40 40 40 SO-592-K > MB
K 40 40 40 SO-592-K > MBN
PERON 699 K 43 34 43 SO-699-K > BN
K 43 34 43 SO-699-K > MB
K 43 34 43 SO-699-K > TG
947 K 30 32 22 608.8K22.025.008 SC
1112 16 25 27 21 SO-1112-16 > BN
16 25 27 21 SO-1112-16 > CH
16 25 27 21 SO-1112-16 > MC
Stefano Orlati Handles
Knobs
MB CH MBN
BN MB TG
SC
BN CH MC
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.47
Cabinet Knobs
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
1160L K 28 25 SO-1160L-K > BN
K 28 25 SO-1160L-K > MC
1186K K 38 25 19 SO-1186-K > BSAT
K 38 25 19 SO-1186-K > BSBN
Complementary handles 1208 page > 26
Complementary handles 1186 page > 26
3318 16 39 18 21 SO-3318-16 > CH
KOTA 3538 K 76 35 76 SO-3538-K > BN
K 76 35 76 SO-3538-K > CH
K 76 35 76 SO-3538-K > MB
K 76 35 76 SO-3538-K > TG
Stefano Orlati Handles
Knobs
BN MC
BSAT BSBN
CH
BN MB TG CH
8.48
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
3440K K 21 33 18 SO-3440-K > BN
K 21 33 18 SO-3440-K > BSBN
K 21 33 18 SO-3440-K > MB
3801 K 33 25 33 SO-3801-K > AB
K 33 25 33 SO-3801-K > BN
K 33 25 33 SO-3801-K > CH
K 33 25 33 SO-3801-K > MB
K 33 25 33 SO-3801-K > P
ZLATI 7301 64 100 20 48 SO-7301-64 > BA
64 100 20 48 SO-7301-64 > BC
64 100 20 48 SO-7301-64 > BN
64 100 20 48 SO-7301-64 > MB
64 100 20 48 SO-7301-64 > MW
64 100 20 48 SO-7301-64 > SB
Stefano Orlati Handles
Knobs
MB BN BSBN
AB BN CH P MB
BA BN BC SB MB MW
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.49
Cabinet Knobs
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
DUHA 7580 K 30 30 30 SO-7580-K > MB
K 30 30 30 SO-7580-K > MBN
K 30 30 30 SO-7580-K > SG
K 30 30 30 SO-7580-K > TG
8047 K 38 31 38 SO-8047-K > BN
K 38 31 38 SO-8047-K > MC
8393 K 64 32 22 SO-8393-K > P
Stefano Orlati Handles
Knobs
MB TG MBN SG
BN MC
P
8.50
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
8741 K 33 28 33 SO-8741-K > AB
K 33 28 33 SO-8741-K > BN
K 33 28 33 SO-8741-K > CH
Complementary handle 8658 page > 27
Complementary handle 8407 page > 27
9909 K 45 45 SO-9909-K > MB
C10 K 30 30 30 SO-C10-K > WHC/P
Complementary handles C15 page > 28
Stefano Orlati Handles
Knobs
BN CH AB
MB
WHC/P
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.51
Cabinet Knobs
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
C14 K 75 35 23 SO-C14-K > WHC/P
Complementary handles C15 page > 28
GL02 K 35 28 35 SO-GL02-K > CL/CH
GL03 K 35 32 35 SO-GL03-K > CL/CH
CV30 K 30 30 608.8K20.030.003 BN
K 30 30 608.8K20.030.007 CH
K 30 30 608.8K20.030.008 SC
Stefano Orlati Handles
Knobs
WHC/P
CL/CH
CL/CH
BN CH SC
8.52
Stefano Orlati Handles
Push to Open
Centre (mm)
Length (mm)
Width (mm)
Item number
Finish
9010 32 80 16 608.8Z00.000.403 SC
•
Suits 13mm - 18mm board thickness
SC
Download supporting documentation from the Titus Tekform website titustekform.com.au 8.53
Cabinet Knobs
Stefano Orlati Handles
Push to Open
Centre (mm)
Length (mm)
Height (mm)
Width (mm)
Item number
Finish
TEZKA Push Panel 9054 30 35 75 5 SO-9054-30 > BN
30 35 75 5 SO-9054-30 > CH
30 35 75 5 SO-9054-30 > MB
30 35 75 5 SO-9054-30 > TG
BN MB TG CH
x.1
Innerware &
Accessories
Download supporting documentation from the Titus Tekform website titustekform.com.au x.2
Innerware & Accessories
Innerware &
Accessories
9.2
Innerware
Product guide
Kitchen Innerware
Page
Quadra Base and Corner Units 9.4
Quadra Pantry Units 9.8
Chrome Innerware Units 9.10
Wire Drawers 9.17
Wire Storage Baskets 9.18
Kitchen Accessories 9.19
Laundry Innerware
Kosara Undermount Laundry Hampers 9.20
Tekno Push to Open and Soft Close Laundry Hampers 9.21
Wire Basket Laundry Hampers 9.22
Wardrobe Innerware
Wardrobe Hanging Rail 9.23
Set 200 Sliding Door System 9.24
Titusoft SD100s 9.28
Set F400 BiFold System 9.32
9.3
Drawer Inserts
Kombi Cutlery Trays 9.33
Cutlery Inserts 9.37
Spice Trays 9.38
Utensil Organisers 9.39
Waste Bins
Kosara Undermount Soft Close Bins 9.42
Tekno Push to Open Soft Close Bins 9.44
Tekno Soft Close Bins 9.46
Tidy Bins 9.48
Pull-out Twin Bins 9.50
9.4
Kitchen Innerware
Base Solutions • Full extension soft-close runners
• Solid base for improved functionality
• Includes two non-slip mats
• Stylish anthracite finish Suits outside cabinet width (mm) Width (mm) Depth (mm) Height (mm)
Weight capacity (kg)
Item number
Quadra Base Pull-out Unit 150 110 500 570 20 607.8D90.150.004
200 164 500 570 20 607.8D90.200.004
300 264 500 570 20 607.8D90.300.004
200 Bottle Holder Insert > 607.D90.200.104
300 Bottle Holder Insert > 607.D90.300.104
• Bottle holders (pictured) sold separately
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.5
Innerware & Accessories
Kitchen Innerware
Corner Solutions • Door opening 450mm
• Integrated soft close damping
• Universal mechanism for left and right
• Complete access to corner storage
• Solid base for improved functionality
• Includes four non-slip mats
• Stylish anthracite finish
• 8kg weight capacity per tray
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Weight capacity (kg)
Item number
Quadra Complete Out Corner Unit 900 700 500 620 32 607.8D25.045.004
9.6
Kitchen Innerware
Corner Solutions • Optimise storage with corner access
• Two independent swivel shelves
• Integrated soft close damping
Opening direction
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Weight capacity (kg)
Item number
Ovalina Corner Swivel Unit Left 900 860 500 600 20 607.8D26.090.004
Right 900 860 500 600 20 607.8D27.090.004
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.7
Innerware & Accessories
Kitchen Innerware
Pull-out Bins • Full extension soft close runners
• Four waste bins for easy recycling separation
• Independent pull-out shelves
• Removable bin lids
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Capacity Mounting Item number
Quadra Pull-out Bin 450 418 487 320 4x 16L Base 607.8G05.045.004
600 568 487 320 4x 16L Base 607.8G05.060.004
9.8
• Soft close damping technology
• 5 solid base baskets
• 120kg full extension capacity
• Includes five non-slip mats
• Stylish anthracite finish
Kitchen Innerware
Pantry Solutions
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Item number
Quadra Tall Pull-out Pantry Unit 300 240 490 1900-2100 607.8D55.030.004
400 340 490 1900-2100 607.8D55.040.004
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.9
Innerware & Accessories
• Soft close damping technology
• Slide-out design for full basket access
• 5 solid-base baskets
• 120kg full extension capacity
• Includes five non-slip mats
• Stylish anthracite finish
Kitchen Innerware
Pantry Solutions
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Item number
Quadra Tall Slide-out Pantry Unit 450 414 500 1900-2100 607.8D55.045.004
600 564 500 1900-2100 607.8D55.060.004
9.10
• Integrated soft close damping
• Side mount installation
• Chrome plated finish
• 15kg load capacity recommended per basket
Kitchen Innerware
Base Solutions
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Weight capacity (kg)
Item number
Narrow Side Mount Pull-out Utility Unit 150 112 508 500 40 607.8D80.500.015U
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.11
Innerware & Accessories
Kitchen Innerware
Base Solutions • Suitable for hinge or panel door
• Universal left or right hand mounting
• Integrated soft close function
• Includes 2 baskets
Suits cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Weight capacity (kg)
Item number
Side Mount Pull-out Utility Unit 200 158 488 569 40 607.8D90.596.020U
300 248 488 569 40 607.8D90.596.030U
9.12
Kitchen Innerware
Corner Solutions • Utilise wasted corner space for storage
• Suitable for hinge or panel doors
• Integrated soft close damping
Opening direction
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Weight capacity (kg)
Item number
Swivel Corner Unit Left-hand 450 440 830 180 20 607.8D25.210.090
Right-hand 450 440 830 180 20 607.8D25.220.090
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.13
Innerware & Accessories
Kitchen Innerware
Corner Solutions • Utilise wasted corner space for storage
• Innovative mesh basket design
• Suitable for hinge or panel doors
• Universal left and right handed hinge doors
• Integrated soft close damping
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Weight capacity (kg)
Item number
Full Access Corner Unit 450 615 525 595 20 607.8D25.595.045
9.14
Kitchen Innerware
Corner Solutions • Utilise wasted corner space for storage
• Innovative mesh basket design
• Universal for left and right handed doors
• Integrated soft close damping
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Weight capacity (kg)
Item number
Universal Magic Corner Unit 450 864-964 520 550 20 607.8D26.520.045U
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.15
Innerware & Accessories
Kitchen Innerware
Corner Solutions • 270° rotation
• Each carousel rotates independently for easy access
and cleaning Suits outside cabinet width (mm) Diameter (mm)
Height (mm)
Weight capacity (kg)
Item number
270° Lazy Susan Corner Unit 800 710 565-790 20 607.8D25.070.090
900 820 635-800 20 607.8D25.080.090
9.16
• Integrated soft close function
• Innovative mesh basket design
• Includes 5 inner baskets
• Weight capacity 100kg
• Min. internal carcase depth 510mm
Kitchen Innerware
Pantry Solutions
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Item number
Pull-out Pantry Unit with Soft Close 300 250 500 1860-2200 607.8D55.222.030
400 345 500 1860-2200 607.8D55.222.040
• Min. internal carcase depth 510mm
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.17
Innerware & Accessories
Kitchen Innerware
Wire Drawers • Integrated soft close function
• Pull-out wire drawers for kitchen storage
• Weight capacity 40kg Suits outside cabinet width (mm) Width (mm) Depth (mm)
Height (mm)
Item number
Wire Drawers with Soft Close 450 410-418 453 200 607.8D15.200.045
500 460-468 453 200 607.8D15.200.050
600 560-568 453 200 607.8D15.200.060
800 760-768 453 200 607.8D15.200.080
900 860-868 453 200 607.8D15.200.090
400 360-368 453 135 607.8D15.135.040
450 410-418 453 135 607.8D15.135.045
500 460-468 453 135 607.8D15.135.050
600 560-568 453 135 607.8D15.135.060
800 760-768 453 135 607.8D15.135.080
900 860-868 453 135 607.8D15.135.090
9.18
Kitchen Innerware
Wire Storage Baskets
Internal cabinet width (mm)
Depth (mm)
Height (mm)
Item number
Wire Storage Basket with slides 466 400 200 607.8F02.168.002
393 450 200 607.8F02.172.002
393 450 140 607.8F02.174.002
416 450 200 607.8F02.176.002
• White finish
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.19
Innerware & Accessories
Kitchen Accessories
Kitchen Towel Rails
Arms Length (mm) Finish Item number
Tea Towel Rail 2 470 Chrome 607.8G03.890.200
Made of steel
D-shape Tea Towel Rail 300 Chrome 607.8G00.905.300
380 Chrome 607.8G00.905.380
Made of steel
9.20
Laundry Innerware
Kosara Undermount
Softclose Hampers • Undermount soft close runner system
• 2 removable high impact plastic bins
• Door mounted
• Dual baskets for easy separation
• White finish
Depth (mm)
Width (mm)
Height (mm)
To suit cabinet width (mm)
Capacity Mounting Closing Item Number
Kosara Softclose Laundry Hamper 520 412 555 450 2x 35L Door Soft Close 607.8G07.370.177
520 562-580 555 600 2x 35L Door Soft Close 607.8G07.370.261
450mm
600mm
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.21
Waste Bins
Laundry Innerware
Tekno Softclose Hampers • Hampers suitable for use with Tekform Drawer systems
for superior soft close damping
Depth (mm)
Width (mm)
Height (mm)
To suit cabinet width (mm)
Capacity Mounting Closing Item Number
Tekno Push to Open Laundry Hamper 510 368 575 400 1x 35L Door Soft Close 607.8G07.435.271.P2O
510 418 550 450 1x 48L Door Soft Close 607.8G07.450.351.P2O
510 568 575 600 2x 35L Door Soft Close 607.8G07.470.241.P2O
• For use with Slimline SDWD-T Push to Open drawers only
• Push to open softclose hamper
• Slimline SDWD-T drawer and mechanism included
Tekno Laundry Hamper 510 368 575 400 1x 35L Door Soft Close 607.8G07.435.271
510 418 550 450 1x 48L Door Soft Close 607.8G07.450.351
510 568 575 600 2x 35L Door Soft Close 607.8G07.470.241
• For use with Tekform DWD and Tekform Slimline SDWD drawers
600mm
450mm
9.22
Laundry Innerware
Hampers
Height (mm)
Width (mm)
Depth (mm)
Item number
Tilting Laundry Hamper 495 406 377 607.8E60.406.007
• Includes flap stay
• Chrome finish
Laundry Hamper for Drawers 600 370 460 607.8E60.307.001
• Mounts to drawer front and base
• White powder coated finish
• Wire basket laundry hamper solutions
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.23
Innerware & Accessories
Wardrobe Innerware
Finish
Profile
Length (mm)
Height (mm)
Width (mm)
Item number
Wardrobe Hanging Rail Chrome Round 3000 25 25 607.8E20.025.407
Chrome Round 3000 19 19 607.8E20.019.317
Chrome Oval 3000 30 15 607.8E21.030.307
Black Oval 3000 30 15 607.8E21.030.010
End Flange Chrome Round 55 25 607.8E20.025.307
Chrome Round 50 19 607.8E20.019.307
Chrome Oval 50 607.8E21.030.204
Black Oval 50 607.8E21.030.210
• To use with wardrobe hanging rail
End Pillar Chrome Round 80 25 607.8E20.025.107
Chrome Round 70 19 607.8E20.019.107
Chrome Oval 75 607.8E21.030.109
Black Oval 75 607.8E21.030.110
• To use with wardrobe hanging rail
Centre Pillar Chrome Round 80 25 607.8E20.025.207
Chrome Round 70 19 607.8E20.019.207
Chrome Oval 75 607.8E21.030.209
Black Oval 75 607.8E21.030.310
• To use with wardrobe hanging rail
9.24
Sliding Door Solutions
with Titusoft SD100s
Simple and intuitive mounting
· No pre-drilling required
· Non-handed
· Integrated soft close activator for
less assembly operations
Full door opening
· Unobstructed access into the
cabinet interior
· Slim Titusoft SD100s design for
concealed application
· Fits U and double U shaped profiles
Smooth and Reliable Soft Close
· Titus damper inside
· Effortless opening with low pull-out
force
· Efficient damping on various door
sizes and weights
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.25
Innerware & Accessories
Adjustment
Height adjustment Height adjustment is done through the
adjustment screw on the bottom carriage.
Adjustment range depends on the preset
position.
Carriage is factory preset to the lowest
value.
Side adjustment Side adjustment is done through the
stopper position.
The adjustment defines the gab between
doors and cabinet side/wall.
Stopper limits and stops the motion of the
cabinet door.
Door adjustment
Height adjustment Side adjustment
9.26
Item number for a set
Set for 2 doors
Set for 3 doors
610.9691.380 > K1 K2
Set consists of the following:
Bottom carriages 4 pcs 6pcs
Top carriages 4 pcs 6 pcs
Pan head screws 32 pcs 48 pcs
Stopper 4 pcs 6 pcs
Nut for stopper 4 pcs 6 pcs
Screw M4 x 16 for stopper 4 pcs 6 pcs
Self-adhesive tape 5 pcs 5 pcs
Mounting instructions 1 pce 1 pce
Set 200
Sliding Door System
For bottom running sliding
door systems
Rail accessories are not included and can be ordered
separately.
Top Rail
> see page 9.30
Bottom Rail
> see page 9.30
Titusoft SD100s
> see page 9.28
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.27
Innerware & Accessories
Mounting details Door drilling pattern
· Door weight Max. 50kg
· Door thickness 18-22mm
· Door material Wood (chipboard, MDF, solid wood)
Top and bottom carriage drilling positions
X = space available between top
and bottom panel
X - 57 = door height
9.28
Item number
Grey
Titusoft SD100s 973.9060 > 380
System consists of the following
(quantity for 2 door cabinet):
Standard component
Titusoft SD100s mechanism
2 pcs
Customised components to suit the customer's
sliding door system
Attachment base 4 pcs
Nut 4 pcs
Screw M4 x 16 4 pcs
Titusoft SD100s
Add-on Damper for Set 200
For bottom running sliding
door systems
Technical details
Released position
Drawings show example with components presented above
320
331
185.1
10
28
21.3
18
Activator and adaptor on this page suit Set 200.
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.29
Innerware & Accessories
Mounting details
· Non-handed design
· Effortless door opening with low pull-out force
· Efficient damping on different door sizes
· Slim design for concealed application
Download supporting documentation from the Titus Tekform website titustekform.com.au
Titusoft SD100s capacity:
Up to 50kg per door
Non-handed design Mounting position
Titusoft SD100s is mounted
into the top profile
Fits various U and double U shaped profiles
Mount Titusoft SD100s on top rail on both sides of
the cabinet (1 mechanism per door).
Slim design with 30mm height allows for concealed
application.
Space requirements:
9.30
Rail length (mm)
Item number
2000 610.9692.070.K1
2400 610.9693.070.K1
3000 610.9694.070.K1
*other lengths available upon request
One set consists of:
Top Rail 1 pce
Bottom Rail 1 pce
Rail
For Set 200
Screws for top rail are not supplied and depend
on the application (cabinet, built-in cabinet).
Bottom rail is fixed with self-adhesive tape.
Rail is pre-drilled and ready to install.
Technical Details
Top Rail
Bottom Rail
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.31
Innerware & Accessories
Assembly instructions
Installation video
Available to view and download from titustekform.com.au:
Additional Resources
For Set 200 and Titusoft
SD100s
9.32
Item number for a set
2 Hinge Kit
5 Hinge Kit
608.8V02.518 > 102 105
1 set 1 set
1 length 1 length
2 pcs 5 pcs
1 pc 1 pc
1 pc 1 pc
Set F400
Bi-fold Door System
· Top-hung
· Kitchen cabinet bi-fold
· Room divider
· Use with T-type hinges for a
soft close solution
For top hung
sliding door systems
One set consists of
Upper roller
1800mm aluminium
top track
Centre hinge
Track template
Mounting
instructions
Cabinet hinges not included.
T-type Glissando
110 Hinge
> see Titus
Hinges
T-type 110
Hinge
> see Titus
Hinges
T-type Mounting
Plates
> see Titus
Hinges
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.33
Innerware & Accessories
Mounting details Door drilling pattern
· Door weight Max. 30kg
· Door width Max. 500mm
· Door height Max. 2400mm
· Door thickness Max. 25mm
Folding Door
Hinge
5.5
52
10 x 11.5
35 x 12 35 x 12
5
5
17.3
min. 15
min. 55
26.5
26.5
26.2
5.01
4x16
22.7
30.5
47.5
2 40
64
Depth adjustment
-2 / 2.5mm
For information on choosing the correct number of cabinet hinges for your application, please refer to
the Technical Product Catalogue or speak to a Technical Sales Representative.
9.34
Drawer Inserts
Kombi Cutlery Trays • Full usage of the drawer
• Suitable for all drawer types
• High quality plastic material
• Easy clean surface
To suit drawer width (mm)
Depth (mm)
Width (mm)
Item number
Metallic
White
Kombi Cutlery Tray, 400mm 400 441-500 301-350 607.8F22.040 > 201
400 441-500 301-350 607.8F22.040 > 202
Kombi Cutlery Tray, 450mm 450 370-440 351-400 607.8F22.045 > 102
450 441-500 351-400 607.8F22.045 > 201
450 441-500 351-400 607.8F22.045 > 202
Kombi Cutlery Tray, 500mm 500 441-500 401-450 607.8F22.050 > 201
500 441-500 401-450 607.8F22.050 > 202
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.35
Drawer Inserts
• Full usage of the drawer
• Suitable for all drawer types
• High quality plastic material
• Easy clean surface
Drawer Inserts
Kombi Cutlery Trays
To suit drawer width (mm)
Depth (mm)
Width (mm)
Item number
Metallic
White
Kombi Cutlery Tray, 550mm 550 441-500 451-500 607.8F22.055 > 201
550 441-500 451-500 607.8F22.055 > 202
Kombi Cutlery Tray, 600mm 600 370-440 501-550 607.8F22.060 > 102
600 441-500 501-550 607.8F22.060 > 201
600 441-500 501-550 607.8F22.060 > 202
Kombi Cutlery Tray, 650mm 650 441-500 551-600 607.8F22.065 > 201
Kombi Cutlery Tray, 700mm 700 370-440 601-650 607.8F22.070 > 102
700 441-500 601-650 607.8F22.070 > 201
700 441-500 601-650 607.8F22.070 > 202
9.36
Drawer Inserts
Kombi Cutlery Trays • Full usage of the drawer
• Suitable for all drawer types
• High quality plastic material
• Easy clean surface
To suit drawer width (mm)
Depth (mm)
Width (mm)
Item number
Metallic
White
Kombi Cutlery Tray, 800mm 800 441-500 701-750 607.8F22.080 > 201
800 441-500 701-750 607.8F22.080 > 202
Kombi Cutlery Tray, 900mm 900 441-500 801-850 607.8F22.090 > 201
900 441-500 801-850 607.8F22.090 > 202
Kombi Cutlery Tray, 1000mm 1000 441-500 901-950 607.8F22.100 > 201
1000 441-500 901-950 607.8F22.100 > 202
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.37
Drawer Inserts
Drawer Inserts
Cutlery Inserts
To suit drawer width (mm)
Depth (mm)
Width (mm)
Item number
Metallic
White
Cutlery Insert, 450mm 450 346-435 306-450 607.8F03.101 > 001
450 362-484 357-445 607.8F03.102 > 001
Cutlery Insert, 550mm 550 373-483 482-532 607.8F03.107 > 001
Utensil Trays, 450mm 450 441-500 351-400 607.8F23.045 > 201
450 441-500 351-400 607.8F23.045 > 202
Utensil Trays, 600mm 600 441-500 501-550 607.8F23.600 > 201
600 441-500 501-550 607.8F23.600 > 202
• High-impact Styrene
• Injection moulds
• Uniform thickness
• Trim for versatility to suit most drawers
9.38
Drawer Inserts
Spice Trays
To suit drawer width (mm)
Depth (mm)
Width (mm)
Item number
White
Grey
Spice Tray, 450mm 450 430-520 350-390 607.8G23.045 > 001
450 430-520 350-390 607.8G23.045 > 002
Spice Tray, 500mm 500 430-520 400-440 607.8G23.050 > 002
Spice Tray, 600mm 600 430-520 500-540 607.8G23.060 > 001
600 430-520 500-540 607.8G23.060 > 002
Spice / Cutlery Tray, 800mm 800 430-520 700-740 607.8G24.080 > 001
800 430-520 700-740 607.8G24.080 > 002
Spice / Cutlery Tray, 900mm 900 430-520 800-840 607.8G24.090 > 001
900 430-520 800-840 607.8G24.090 > 002
• High-impact Styrene
• Injection moulds
• Uniform thickness
• Trim for versatility to suit most drawers
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.39
Drawer Inserts
• Durable and attractive stainless steel
• Designed to provide a space left or right of the tray for
long utensils
Drawer Inserts
Utensil Organisers
Depth (mm)
Width (mm)
Item number
Stainless steel
Triple Cutlery Organiser 450 280 607.8E12.208 > 459
500 280 607.8E12.208 > 509
550 280 607.8E12.208 > 559
Cutlery Utensil Organiser, 208mm Range 450 208 607.8E13.208 > 459
500 208 607.8E13.208 > 509
550 208 607.8E13.208 > 559
Cutlery Utensil Organiser, 309mm Range 450 309 607.8E13.308 > 459
500 309 607.8E13.308 > 509
550 309 607.8E13.308 > 559
Cutlery Utensil Organiser, 377mm Range 450 377 607.8E13.377 > 459
500 377 607.8E13.377 > 509
550 377 607.8E13.377 > 559
9.40
Drawer Inserts
Utensil Organisers • Durable and attractive stainless steel
• Designed to maximise your drawer space and versatility Depth (mm) Width (mm)
Item number
Stainless steel
Double Utensil Organiser 450 202 607.8E12.202 > 459
500 202 607.8E12.202 > 509
550 202 607.8E12.202 > 559
Double Utensil Organiser, Large 450 291 607.8E12.291 > 459
500 291 607.8E12.291 > 509
550 291 607.8E12.291 > 559
Single Utensil Organiser 450 105 607.8E12.105 > 459
500 105 607.8E12.105 > 509
550 105 607.8E12.105 > 559
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.41
Waste Bins
Innerware & Accessories
9.42
Depth
(mm)
Width
(mm)
Height
(mm) Capacity Mounting Item number
300mm Kosara Anthracite Bin
with Soft Close
520 268 620 2x 16L Door 607.8G05.332.134
• To suit 300mm cabinet width
• 32L total capacity
Made from plastic and steel
400mm Kosara Anthracite Bin
with Soft Close
520 368 620 2x 31L Door 607.8G05.362.144
• To suit 400mm cabinet width
• 62L total capacity
Made from plastic and steel
• Undermount soft close runner system
• 2 removable high impact plastic bins
• Door mounted
• Fitted metal lid with non-slip mat
• Modern anthracite finish
Waste Bins
Kosara Softclose Waste Bin
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.43
Waste Bins
Depth
(mm)
Width
(mm)
Height
(mm) Capacity Mounting Item number
450mm Kosara Anthracite Bin
with Soft Close
520 418 540 2x 33L Door 607.8G05.366.174
520 418 620 2x 37L Door 607.8G05.374.174
• To suit 450mm cabinet width
Made from plastic and steel
600mm Kosara Anthracite Bin
with Soft Close 520 568 620 2x 16L
2x 31L Door 607.8G05.394.164
• To suit 600mm cabinet width
• 94L total capacity
Made from plastic and steel
• Undermount soft close runner system
• 2 removable high impact plastic bins
• Door mounted
• Fitted metal lid with non-slip mat
• Modern anthracite finish
Waste Bins
Kosara Softclose Waste Bin
9.44
Waste Bins
Push to Open Softclose Bins • To suit 400mm outside cabinet width
• For use with the Slimline SDWD-T Push to Open drawer
system for a push to open, softclose solution
Depth (mm)
Width (mm)
Height (mm)
Capacity Mounting Closing Item number
Tekno Bin with Soft Close 26L 506 368 340 26L Door Soft Close 607.8G06.304.040.P2O
• Includes 2x 13L buckets
• Slimline SDWD-T drawer and mechanism included
Tekno Twin Bin with Soft Close 36L 506 368 470 36L Door Soft Close 607.8G06.302.040.P2O
• Includes 2x 18L buckets
• Slimline SDWD-T drawer and mechanism included
Tekno Bin with Soft Close 35L 506 368 570 35L Door Soft Close 607.8G06.300.040.P2O
• Includes 1x 35L bucket
• Slimline SDWD-T drawer and mechanism included
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.45
Waste Bins
Waste Bins
Push to Open Softclose Bins • For use with the Slimline SDWD-T Push to Open drawer
system for a push to open, softclose solution
Depth (mm)
Width (mm)
Height (mm)
Capacity Mounting Closing Item number
Tekno Bin with Soft Close 450 506 418 470 2x 21L Door Soft Close 607.8G04.442.171.P2O
506 418 570 2x 27L Door Soft Close 607.8G04.454.151.P2O
• To suit 450mm cabinet width
• Slimline SDWD-T drawer and mechanism included
Tekno Twin Bin with Soft Close 70L 506 562 506 2x 35L Door Soft Close 607.8G06.307.040.P2O
• To suit 600mm cabinet width
• Slimline SDWD-T drawer and mechanism included
9.46
Waste Bins
Tekno Softclose Bins • To suit 400mm outside cabinet width
• Bins suitable for use with Tekform Drawer
Depth (mm)
Width (mm)
Height (mm)
Capacity Mounting Closing Item number
Tekno Bin with Soft Close 26L 506 368 340 26L Door Soft Close 607.8G06.304.040
• Includes 2x 13L buckets
Tekno Twin Bin with Soft Close 36L 506 368 470 36L Door Soft Close 607.8G06.302.040
• Includes 2x 18L buckets
Tekno Bin with Soft Close 35L 506 368 570 35L Door Soft Close 607.8G06.300.040
• Includes 1x 35L bucket
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.47
Waste Bins
Depth (mm)
Width (mm)
Height (mm)
Capacity Mounting Closing Item number
Tekno Bin with Soft Close 450 506 418 470 2x 21L Door Soft Close 607.8G04.442.171
506 418 570 2x 27L Door Soft Close 607.8G04.454.151
• To suit 450mm cabinet width
Tekno Twin Bin with Soft Close 70L 506 562 506 2x 35L Door Soft Close 607.8G06.307.040
• To suit 600mm cabinet width
Spare Tekno Softclose 400mm Bin Frame 513 368 Soft Close 607.8G06.308.040
Spare Tekno Softclose 600mm Bin Frame 513 568 Soft Close 607.8G06.309.040
Spare Tekno Bin Bucket 18L 607.8G06.310.180
Spare Tekno Bin Bucket 13L 607.8G06.309.130
Spare Tekno Bin Bucket 35L 607.8G06.309.350
• Replacement parts for Tekno Bins
Waste Bins
Tekno Softclose Bins • Bins suitable for use with Tekform Drawer
9.48
Waste Bins
Pull-out Bins • Full extension soft close runners
• Four waste bins for easy recycling separation
• Independent pull-out shelves
• Removable bin lids
Suits outside cabinet width (mm)
Width (mm)
Depth (mm)
Height (mm)
Capacity Mounting Item number
Quadra Pull-out Bin 450 418 487 320 4x 16L Base 607.8G05.045.004
600 568 487 320 4x 16L Base 607.8G05.060.004
Download supporting documentation from the Titus Tekform website titustekform.com.au 9.49
Waste Bins
Waste Bins
Single Bins • Removable hi-impact bin for easy cleaning
• Right or left opening
Depth (mm)
Width (mm)
Height (mm)
Capacity Mounting Item number
White
Tidy Bin 8L 300 300 280 8L Door 607.8G03.008 > 201
• Automatic opening lid
Bottom Mounted Tidy Bin 360 262 310 15L Bottom 607.8G06.115 > 101
• Ideal for apartment/townhouse environment
• Small bin to suit vanity
• Perfect for under sink applications
• Simple DIY installation to the base of the cabinet
• Soft close ball bearing runners
9.50
Waste Bins
Pull-out Twin Bins • Closed lid position minimises odours
• Removable hi-impact plastic bins for easy cleaning
Depth (mm)
Width (mm)
Height (mm)
Capacity Mounting Closing Item number
White
Twin Bin Pull-out Double Bins with Metal Frame 510 340 320 2x 15L Bottom Soft Close 607.8G06.130 > 101
510 340 380 2x 18L Bottom Soft Close 607.8G06.136 > 001
490 340 320 2x 15L Door 607.8G06.030 > 201
490 340 380 2x 18L Door Soft Close 607.8G06.136 > 201
• Ideal for low shelf applications or plumbing
• Sturdy, hi-impact frame
• To suit 400mm cabinet
Download supporting documentation from the Titus Tekform website titustekform.com.au x.1
Stefano Orlati
LED Lighting
LED Lighting
10.2
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.3
LED Lighting
Stefano Orlati LED Lighting
Product Guide
Lighting Information
Key Terms 10.6 Key Design Choices 10.9
Watts vs Lumens 10.7 Made to Measure Service 10.10
What is Colour Temperature? 10.8 Product Comparison Chart 10.11
LED Strip Lights
LED Profiles
LED Downlights
Accessories & Transformers
24V 3527 Colour Tuneable 10.18 24V 5050 RGBW Colour 10.22
24V COB 528 10.19 12V 5050 Bright 10.23
24V 2835 5mm 10.20 12V 3528 Standard IP65 10.24
24V 3014 Continuous 10.21 12V 3528 Standard IP20 10.25
Pendant Profile 10.26 Square Fusion Profile 10.29
Micro Profile 10.27 Corner Profile 10.30
Slimline Profile 10.28 8mm Pluto Profile 10.31
24V Imperia Downlights 10.34 12V Imperia Downlights 10.35
5-in-1 Controller 10.36 PIR Sensor 10.45
Dimmer Panel 10.37 Toggle Switch 10.46
Colour Tuneable Remote Panel 10.38 12V - 25W Transformer 10.47
RGBW Remote Panel 10.39 12V - 25W Transformer 10.48
RGBW Controller 10.40 12V - 25W Transformer 10.49
Dimmer Remote 10.41 12V - 25W Transformer 10.50
Touch Dimmer 10.42 12V - 25W Transformer 10.51
Door Sensor 10.43 12V - 25W Transformer 10.52
Hand Sensor 10.44 DIY Accessories 10.53
Capacity Guide
Capacity Guide 10.56
Wireless Lighting & Connectivity
Luna Lithium Light 10.54 Built-in Wireless Charger 10.55
Warranty & FAQs
Frequently Asked Questions 10.57
10.4
Enhance your space
with LED Lighting
Energy efficient
· Uses approximately 85% less
energy than hallogen or
incandescent lights
· Achieves full brightness in
microseconds
· Cuts greenhouse gas emissions
Low maintenance
· Plug and play installation
· Lifetime of between
30,000 and 60,000
hours or more
Safer for you and the
environment
· Contains no mercury or lead
· Emits no UV rays or infrared
radiation
· Operates at a much cooler
temperature than incadescent
lights
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.5
Customise to suit your
application
· LED Profiles for improved heat
dissipation
· Amazon Alexa and Google
Home Smart home connectivity
options
· Remote controller panels for
enhanced functionality
Made to Measure options
· Order to suit your lighting plan
· All connections and transformers
included
· Hassle-free service
Quality certified
· To Australian and New
Zealand standards
AS/NZS 3190:2011
10.6
Getting Started
LED Lighting
Information
A basic understanding of
lighting essentials will help
you create an effective
lighting plan to supplement
your interior design.
Lighting metrics can be a little confusing
to understand, however once you
have a solid grasp of the concepts and
terminology, you’ll be ready to finalise
your lighting plan.
Keep reading to gain a brief overview of
design parameters, technologies and
terminology used in the lighting industry.
Key Terms
• Ampere Also referred to as ‘amps’, this indicates the current. This is the number of
electrons flowing through the cable in a given period of time.
• Input The amount of electrical energy put into a device, measured in lumens.
• IP Rating A classifying system that rates the degree of protection provided by
mechanical casings and electrical enclosures against intrusion, dust,
accidental contact and water.
• LED Stands for Light Emitting Diode, which are solid state lighting components.
Each individual LED consists of a semiconductor diode which emits light
when a voltage is applied.
• Lumens A unit of luminous intensity which measures the total quantity of visible light
emitted by a source per unit of time.
• Lux Formula A measurement of illuminance which determines how much light there is over
a given surface area. One lux (lx) is equal to one lumen per square metre. The
number of lumens divided by metres squared = lux measurement.
• Output The amount of light emitted, measured in watts.
• Projection The distance or angle a light can reach from its originating source.
• Transformer An electrical device that transfers electrical energy from one electrical circuit
to another, reducing or increasing the voltage of an electrical circuit.
• Voltage The pressure from an electrical circuit’s power source that pushes charged
electrons (the current) through a conducting loop, enabling them to illuminate.
• Watts A power unit or radiation flux, corresponding to the rate of consumption of
energy in an electrical circuit where the potential difference is one volt and the
current one ampere.
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.7
LED Lighting
Watts vs Lumens
What’s the difference?
How to determine the
correct transformer by
calculating minimum
wattage
How to calculate amperage A simple formula to calculate amps is as
follows: Watts divided by Volts equals
Amps.
For instance, if the wattage of the lighting
source you are working with is 60W and
the volts are 12V, then the amperage
would be 5.
60 watts divided by 12V equals 5 amps.
It’s important not to overload lighting tools
like transformers.
Lighting was once ranked on the number
of watts used when purchasing the now
defunct incandescent bulbs. New energyefficient LED technology means that we
can no longer rely on wattage to indicate
the brightness of a bulb. Instead we
measure in Lumens.
Lumens give a measure of the amount
of light produced by a light source.
Incandescent light bulbs produced 800
lumens and used 60W of power, whereas
energy-efficient LEDs use only 10W.
More lumens equals more light.
Comparison by lighting
source:
Incandescent
Watts (least
efficient)
Lumen Value
(amount of
light)
LED (most
efficient)
Compact
Flourescent Lamp
(less efficient)
Halogen
(less efficient
than CFL but
more than
incandescent)
100W 1500 Up to 23W Up to 23W Up to 70W
75W 1100 Up to 17W Up to 23W Up to 52W
60W 800 Up to 12W Up to 15W Up to 42W
40W 500 Up to 8W Up to 9W Up to 28W
25W 500 Up to 4W Up to 6W Up to 18W
If you have a transformer rated for 10
amps but you run 200 amps through it,
the transformers fuse will break. You need
to make sure the lighting fixtures aren’t
taking on more current than they can
handle and are rated for.
Accessories like sensors also affect the
overall amperage and need to be taken
into account in your calculations. Using
over or under powered transformers isn’t
just inefficient - it can also be dangerous,
causing over-heating, short-circuiting or
even fire.
Transformers are used within homes to
convert electrical power into multiple
fixtures. For example, if your home runs
on 240-volt power, transformers can
convert the energy down the to the 12V
or 24V needed for individual fixtures.
The number of lights and accessories run
off each transformer will determine the
minimum wattage your transformer needs
to support. Calculate wattage based on
the number of downlights, or the length
of your strip light multipled by the
output (watts) per light or metre.
So if you have six downlights each with
an output of 3.2W, then 6 x 3.2 will give a
minimum wattage of 19.2.
Likewise, if your strip light has an output
of 10W per metre and you want to run
3m, then your transformer must support a
minimum of 30W (10W x 3m).
If you’re running the lights through a
sensor or accessory to control the
activation, then your sensor must also
support a loading power greater than the
minimum total wattage.
W ÷ V = A
Min. Wattage =
Output x Length
10.8
What is Colour Temperature?
LED Lighting
Information
Different areas within
a house or project
suit different colour
temperatures according to
their use
Colour temperature is dictated by three
tones: Warm White, Cool White and
Daylight White.
The Kelvin degree system designates a
rating to the colour temperature of the
light, corresponding to this spectrum. The
higher the Kelvin, the cooler the colour
temperature.
While whiter lights may seem brighter,
the number of lumens doesn’t actually
change and the true brightness is
not affected by the change in colour
temperature.
Traditionally, most homes were lit by
incandescent bulbs with a warm white
tone and while these bulbs were most
common, it doesn’t necessarily mean that
they are the best option for every space.
The colour temperature of your lighting
can make a big difference to your paint
and even the overall look and feel of your
space.
Ultimately, the decision is up to you, but if
you’re having trouble deciding, opt for our
Colour Tuneable strip lights for control
and flexibility and the best of all worlds.
Warm White: With a kelvin rating
between 2600 - 3200, warm white
lights are associated with comfort and
relaxation. It’s the gentlest light so it’s
great for overall illumination in living areas,
dining rooms and bedrooms.
Cool White: Cool white can be anywhere
between 5000 - 10,000K and appears
whiter and more neutral than the warm
white. Cool white tones are great for task
lighting in spaces like medical clinics,
kitchens, bathrooms, workspaces, or
security and outdoor lighting. The lack of
red undertones stimulates our minds and
promotes a sense of energy and focus.
Daylight White: Placed betwen 3500 and
5000K, daylight white provides a good
middle ground between the sometimes
harsh cool white tones and the
occasionally overbearing warm whites. It’s
a good everyday choice for multi-purpose
spaces.
Warm White Daylight White Cool White
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.9
LED Lighting
Key Design Choices
Knowing the purpose
of your lighting is the
first step to creating a
balanced lighting plan
Task Lighting has a functional purpose
and is ideal for detailed task work, such
as food prep or working at a desk.
Generally brighter than ambient lighting to
avoid eyestrain.
Accent Lighting is used to draw attention to a feature or architectural detail,
with brighter focused lighting such as that
used on decorative shelving.
Ambient Lighting provides consistency
and uniformity in a space and is typically
soft with practical applications for visibility.
Often soft and dimmed for desired
aesthetics.
IP Rating Chart:
IP65 = IP 6 & 5
Sophisticated lighting
plans generally include a
combination, or ‘layering’ of all
three lighting types.
No. Solids (First number) No. Liquids (Second number)
0 No protection 0 No protection
1 Protected against objects > 50mm (hands) 1 Protection against dripping water or condensation
2 Protected against objects > 12mm (fingers) 2 Protection against water spray 15° from vertical
3 Protected against objects > 2.5mm (tools/wires) 3 Protection against water spray 60° from vertical
4 Protected against objects > 1.5mm (small tools) 4 Protection against water spray from all directions
5 Protected against dust, limited ingress 5 Protection against low pressure jets of water
6 Totally protected against dust 6 Protection against high pressure water jets and
heavy seas
7 N/A 7 Protection against the effects of immersion (6 inches
to 3.3 feet)
8 N/A 8 Protection against immersion
10.10
Want to take the hassle out of lighting? Order MTM
LED Lighting
Made to Measure Service
Why choose Made to
Measure?
Stefano Orlati Lighting offers a full service
Made to Measure program second
to none. All Made to Measure orders
are cut to your measurements and
outfitted with the required connectors.
The profile includes diffuser, end caps,
mounting clips (if applicable) & LED strip
light option, as well as a 2m cable as
standard.
Our Made to Measure service is more
than just fabrication, our trained lighting
technicians have many years of industry
knowledge and the technical know-how
to answer your questions. We’re also
available by phone if there are issues with
installation.
LIGHTING PLAN
To help us visualise your design, sketch a quick
floorplan showing where your lighting will be
situated. Our expert lighting technicians will review
your drawing and get back to you with any queries
or suggestions. Unless advised otherwise, we will
assume all plans are in our preferred bird’s eye view.
LIGHTING CHOICE
Select from our range of strip lights and downlights
to find the best option to suit your application.
Need colour tuneable lights or enhanced water
resistance? Or want to add a profile to help with
heat dissipation and a more finished look? For
details on applications, see page xx
ACCESSORIES
Choose controllers, remotes and sensors to
enhance the functionality and useability of your
lighting. Add a compatible transformer and we’ll
look after any required connections or soldering.
For more information on capacity guides and
compatibility, see page xx
DELIVERY
MTM lighting orders are supplied in tubes to avoid
damage during transit. Our trained lighting
technicians are also available by phone if you have
questions about installation.
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.11
LED Lighting
Step 1: Lighting Plan
What do I need to consider
when creating a lighting
plan?
MTM
Lighting plan example:
Power + Controller Box
Channel 1
+ 2m extension
Power + Controller Box
Channel 2
To assist our lighting technicians with your
Made to Measure order, send through a
quick sketch or drawing of your lighting
design in plan view.
We suggest planning for multiple different
sources of light to allow for greater control
and flexibility. Keep in mind practicalities
and the area’s main functions to inform
your choices and determine what you will
require. Think of your lighting in terms of
three key phases - task lighting, accent
lighting and ambient lighting. Balancing
each of these aspects of your lighting
design will create a cohesive space and
stylish layering.
What should my lighting
plan include?
When designing your lighting plan, make
sure to note things like mounting details
- whether recessed or surface mounted
- as well as measurements and power
sources.
If you’re using accent lighting inside
cabinets or along decorative shelving,
make sure this is marked. Think about
what controllers or sensors you need, and
where these can be accessed to ensure
an easy flow when using your space.
Consider the direction of the light and
keep in mind maximum runs by referring
to our capacity guides.
Lighting plan checklist: Double check measurements
Confirm location of transformers and power source
Check compliance with local building codes, ie.
distance to appliances and water sources
10.12
Step 2: Choose your lighting
LED Lighting
Made to Measure Service
What lighting options can I
choose?
Start by selecting your strip lights and
then adding any additional downlights,
profiles or modular pendant lighting to
complete your look.
Different strip lights offer different
functionalities, power levels and
compatibility options, so it’s important
to keep your lighting goals in mind when
making your selections.
24V 3527 Colour Tuneable Strip Light (page 10.18)
Control the colour temperature from cool white to warm white in a single
strip light.
Strip Lights:
Length:__________ Remote panel qty:_____ Controller box qty:_____
Colour: Tuneable
24V COB 528 Strip Light (page 10.19)
Flexible chip-on-board lighting for uniform glow.
Length:__________
Colour: Cool White
24V 2835 5mm Strip Light (page 10.20)
Narrow strip light for use with 8mm Pluto profile options (page 35).
Length:__________ 8mm Pluto Profile:
Colour:
Daylight White Warm White
Cool White Daylight White Warm White
Foggy Silver Matt Black
24V 3014 Continuous Strip Light (page 10.21)
Use with an LED profile for a steady non-dotted lighting effect.
Length:__________
Colour: Cool White Daylight White Warm White
24V RGBW Colour Changing Strip Light (page 10.22)
Cycle between red, green, blue, yellow or cool white lighting options in a
single strip light.
Length:__________ Remote panel qty:_____ Controller box qty:_____
Colour: RGBW
RGBW controller instead of remote panel
Credit: BJF Joinery
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.13
LED Lighting
Step 2: Choose your lighting
MTM
12V 5050 Bright Strip Light (page 10.23)
Up to 3x brighter than standard 3528 strip lights.
Length:__________
Colour: Cool White Daylight White Warm White
12V 3528 IP65 Water Resistant Strip Light (page 10.24)
A water-resistant strip light suitable for bathroom and vanity applications.
Length:__________
Colour: Cool White Daylight White Warm White
12V 3528 IP20 Strip Light (page 10.25)
A standard strip light for everyday use.
Length:__________
Colour: Cool White Daylight White Warm White
Downlights:
Foggy Silver Imperia LED Downlights (page 10.34-10.35)
Plug and play installation with optional surface mount bracket.
Qty:__________
Colour: Cool White Daylight White Warm White
Matt Black Imperia LED Downlights (page 10.34-10.35)
Plug and play installation with optional surface mount bracket.
Qty:__________
Colour: Cool White Daylight White Warm White
Brushed Nickel Imperia LED Downlights (page 10.34-10.35)
Plug and play installation with optional surface mount bracket.
Qty:__________
Colour: Cool White Daylight White Warm White
12V 24V
24V
24V
Surface mount bracket qty:__________
Surface mount bracket qty:__________
Surface mount bracket qty:__________
10.14
Step 2: Choose your lighting
LED Lighting
Made to Measure Service
Why choose an LED
profile?
LED Profiles transform the LED Strip Light
into a complete lighting fixture which gives a
stylish and finished look.
LED profiles assist in dissipating heat
and diffusing glow, creating a safer
and steadier lighting solution, as well
as improving the longevity of the LED
diodes.
The profile is composed of an aluminium
backing and perspex diffuser which
preserves and protects the strip light.
Choose clear diffusers for brighter lighting
or opaque for softer illumination.
Pendant Profile (page 10.26)
Order Pendant Profiles products direct with the relevant product code, but
let us know if you’re planning to add one to your lighting plan so we can
recommend the best transformers and remote panels.
Profiles:
Length:__________
Square Fusion Profile (page 10.29)
Surface or recess mount.
Length:__________
Finish: Silver Matt Black
Include in lighting plan?
Slimline Profile (page 10.28)
Recess mount.
Length:__________
Finish: Silver Matt Black
Corner Profile (page 10.30)
Surface or recess mount.
Length:__________
Finish: Silver Matt Black
Micro Profile (page 10.27)
Surface or recess mount.
Length:__________
Finish: Silver Matt Black
Diffuser: Opaque Clear* Tinted*
Diffuser: Opaque Clear* Tinted*
Diffuser: Opaque Clear* Tinted*
Diffuser: Opaque Clear* Tinted* (on request)
*Clear and tinted diffusers not available in NZ.
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.15
LED Lighting
Step 3: Accessories
MTM
What transformer do I
need?
The voltage and power of your
transformer will determine how many
lights or the length of a strip light you
can run within the transformer’s capacity.
Since each strip light consumes power
at different rates, the maximum length
will vary. Sensors also require power, so
adding a sensor option will reduce the
amount of power available to run your
strip lights. The higher the wattage of
the transformer, the higher the capacity,
however you have to be careful not
to overpower your lighting or it could
overheat and become a safety risk. Use
our capacity guide on page 62 to help
determine the best transformer for your
needs.
12V Transformer (page 47-49)
With 6-way junction box included.
Wattage: 25W 60W
Transformers:
24V Transformer (page 50-52)
With 6-way junction box included.
Wattage: 60W 90W 120W
Sensors, Dimmers and Controllers:
Qty:_____ Qty:_____
Sensors (page 42-46)
Activate or deactivate lighting through set motions or
proximity. Includes 6-way junction box.
Hand Sensor: Qty:_____
Door Sensor: Single Double Qty:_____
PIR Sensor: Single Double Qty:_____
Touch Dimmer: Qty:_____
Toggle Switch: Qty:_____
Controllers (page 36-41)
Activate or deactivate lighting through handheld or wall
mounted remote controllers.
Dimmer Remote Panel & Controller Box: Qty:_____
Dimmer Remote Controller: Qty:_____
5-in-1 Controller Box: Qty:_____
90W (NZ only)
Stefano Orlati Transformer
6-way Junction
box
Sensor
Junction
box
Controller box
LED light
Input wire
Output wire
Hand Motion
Sensor
10.16
MTM
LED MADE TO MEASURE ORDER FORM
Customer Name Contact Person Order Number / Job Name
STRIP LIGHT / COLOUR OPTIONS
Includes 2m tails soldered on each end
24V 3527 Colour Tuneable Strip Light 1. Cool White/Warm White Tuneable
LED PROFILES, DOWNLIGHTS AND TRANSFORMERS
*Includes length of aluminium, diffuser, end caps & mounting clips. Note: LED strip lights are recommended to be used in conjunction with profiles. Clear diffusers availale on request.
Slim - 2m length
Opaque
Tinted
Foggy Silver
Matt Black
Corner - 2m length
Opaque
Tinted*
Foggy Silver
Matt Black
Square Fusion - 2m length
Opaque
Tinted
Foggy Silver
Matt Black
Micro - 2m length
Opaque
Tinted
Foggy Silver
Matt Black
Pendant Profile
Include in lighting plan?
SENSORS AND CONTROLLERS (OPTIONAL - see catalogue for compatibility
NOTES:
Dimmer On/Off Remote
Dimmer Remote Panel & Controller Box
TRANSFORMERS:
Hand Sensor
Door Sensor
PIR Sensor
Single
Single
Double
Double
Touch Dimmer
Toggle Switch - Single
24V Imperia LED Downlights
QTY:
Foggy Silver
Matt Black
Brushed Nickel
OPTIONAL: Surface Mount Brackets
12V-25W Transformer
12V-60W Transformer
24V-60W Transformer
24V-90W Transformer
*All in-depth lighting orders require a sketch or drawing to be supplied in plan view.
1. Flexible ribbon only
2. Ribbon and profile mm mm mm mm
Length: ________
Tuneable Colour Temperature Remote Panel Controller Box
Qty: ______ Qty: ______
24V COB 528 Strip Light 1. Cool white
Length: ________
2. Warm white 3. Daylight White
24V 2835 5mm Strip Light 1. Cool white
Length: ________
2. Warm white 3. Daylight White
8mm Pluto Profile: Foggy Silver Matt Black
24V 3014 Continuous Strip Light 1. Cool white
Length: ________
2. Warm white 3. Daylight White
24V RGBW Colour Change Strip Light 1. RGBW
Length: ________
RGBW Colour Changing Remote Panel Controller Box
or RGBW Remote Control Qty: ______ Qty: ______
12V 5050 Bright Strip Light 1. Cool white
Length: ________
2. Warm white 3. Daylight White
12V 3528 IP65 Water Resistant Strip Light 1. Cool white
Length: ________
2. Warm white 3. Daylight White
12V 3528 IP20 Strip Light 1. Cool white
Length: ________
2. Warm white 3. Daylight White
Length: ________
Order separately
Length: ________ Length: ________ Length: ________ Length: ________
12V Imperia LED Downlights
QTY:
Foggy Silver
Surface Mount Brackets
OPTIONAL:
Cool White
Warm White
Daylight White
Qty: ______
Cool White
Warm White
Daylight White
Qty: ______
24V-120W Transformer
12V-90W Transformer
Qty: ______
Qty: ______
Qty: ______
Qty: ______
Qty: ______
Qty: ______
See capacity guides for more information.
Qty: ______
Qty: ______
Qty: ______
Qty: ______
Qty: ______ 5-in-1 Controller Box
Qty: ______
Qty: ______
Qty: ______
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.17
LED Lighting
Product Comparison Chart
Lighting Product Voltage Energy
(watts)
LEDs
(per/m)
Lumens
(per/m)
IP
Rating
Max.
Run
Cuttable
Increments
Best suited for Page
3528 12V IP20
Standard Strip
Light
12V 4.8/m 60 300 IP20 10m 50mm Standard 12V
applications for
everyday use
10.25
3528 12V IP65
Standard Strip
Light
12V 4.8/m 60 300 IP65 10m 50mm Areas prone to
moisture or steam
like vanities
10.24
5050 12V Extra
Bright Strip Light
12V 14.4/m 60 900 IP20 4m 50mm Commercial
applications
10.23
3014 24V
Continuous Strip
Light
24V 16.3/m 204 1590-2040 IP20 7m 30mm Non-dotted effects
when used with an
LED profile
10.21
2835 24V 5mm
Strip Light
24V 14.4/m 120 1300-1500 IP20 8m 50mm Narrow spaces like
behind rangehoods
10.20
COB 528 24V
8mm Flexible
Strip Light
24V 10/m COB 1000-1100 IP20 12m 11mm Continuous glow
with modern Chip
on Board reliability
10.19
3527 24V
Colour Tuneable
Strip Light
24V 19.2/m 120 1000-1500 IP20 6m 50mm Adaptability to
adjust between
cool or warm white
10.18
RGBW 24V
Coloured Strip
Light
24V 10/m 20 700 IP20 12m 170mm Ideal for shopfitting
or bar and club
applications
10.22
Imperia
Downlight 12V
12V 3.2 1x COB N/A IP20 6
lights
N/A Low voltage
downlights
10.34
Imperia
Downlight 24V
24V 3 1x COB N/A IP20 6
lights
N/A Under cabinetry
features
10.35
Profile Option Finish Diffusers Mounting Dimensions
(WxHxL)
Best suited for Page
Pendant Profile FS / MB Opaque Suspension or
wall mount
55x70x2000 Islands or feature
pieces
10.26
8mm Pluto Profile FS / MB Opaque Surface mount
with 3M tape
8x7.8x3000 Narrow spaces like
behind rangehoods
10.31
Micro Profile FS / MB CL / OP / TI Surface mount
or recess
17.5x8x3000 Unobtrusive
surface mounting
10.27
Slimline Profile FS / MB CL / OP / TI Recess mount
(7.5mm)
24x8x3000 Recess mount
applications
10.28
Square Fusion Profile FS / MB CL / OP / TI Surface mount
or recess
17x15x3000 Perfect height to
suit 16mm board
without requiring a
rebate
10.29
Corner Profile FS / MB CL / OP / TI Surface mount 18x18x3000 Angled applications 10.30
10.18
Technical and mounting details Item number Adjustable from approx 3000k to approx 6000k
24V 3527 Colour Tuneable IP20 5m Roll DIY-3527 > WW/CW
Diode Size 3.5mm x 2.7mm
LEDs per metre 120
Voltage 24V DC
Dimensions: Energy (watts) 19.2 per/m
Width 10mm
Projection 3mm
Viewing Angle 120°
Waterproof Rating IP20
Dimmable Yes
Lumens (per/m) Adjustable 1000-1500
Transformer 24V Maximum run 6 meters
Compatible with: Cuttable 50mm increments
24V 60W Transformer: Max run 3m
24V 90W Transformer: Max run 4.5m
24V 120W Transformer: Max run 6m
Tuneable Panel: Max run 12m 60W, 18m 90W or 24m 120W when
used with the Controller Box or 5-in-1 Controller Box
• Adjust colour temperature to suit a variety of moods and rooms
• Plug & Play installation
• Cuttable in 50mm increments
• Self-adhesive peel and stick backing
• Long-life LED diodes
Note: Requires the Tuneable Panel and a controller box to access
full functionality (p. 10.42)
LED Strip Lights
24V 3527 Colour Tuneable
COOL WHITE (6000K)
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
DUAL
TONE
One product to suit every application - the
3527 tuneable strip can be adjusted from
cool white to warm white and everything
in between
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
DIM PROFILE
WARM WHITE (3200K)
Scan to view
documentation and
resources:
MTM DIY
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.19
LED Lighting
Technical and mounting details Item number
Daylight white (4000k)
Cool white (6000k)
Warm white (3000k)
24V COB 528 IP20 5m Roll DIY-COB528 > DW CW WW
Diode Size 528
LEDs per metre COB
Voltage 24V DC
Dimensions: Energy (watts) 10 per/m
Width 8mm
Projection 1.6mm
Viewing Angle 150°
Waterproof Rating IP20
Dimmable Yes
Lumens (per/m) Daylight White - 1050
Cool White - 1100
Compatible with: Warm White - 1000
24V 60W Transformer: Max run 6m Transformer 24V Maximum run 12 meters
24V 90W Transformer: Max run 9m Cuttable 11mm increments
24V 120W Transformer: Max run 12m
Hand sensor: Max run 4.5m 60W only
Door sensor: Max run 4.5m 60W only
Double Door sensor: Max run 4.5m 60W only
PIR sensor: Max run 4.5m 60W only
Double PIR sensor: Max run 4.5m 60W only
Touch Dimmer: Max run 4.5m 60W only
Dimmer Controller: Max run 5m 60W, 8m 90W or 11m 120W
Dimmer Panel: Max run 22m 60W, 34m 90W or 46m 120W when used
with the Controller Box or 5-in-1 Controller Box
Toggle Switch: Max run 6m 60W or 7m 90W only
• New flip chip-on-board (COB) flexible LED strip light
• Higher heat conductivity for better thermal management
• High density diodes for non-dotted lighting panel effect
• Very bright LEDs
• Plug & Play installation
• Cuttable in 11mm increments
• Self-adhesive peel and stick backing with 3M tape
• Low power consumption
LED Strip Lights
24V COB 528
WARM WHITE (3200K) COOL WHITE (6000K) WARM WHITE (3200K)
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
A flexible chip-on-board strip light to
create innovative LED designs and
configurations
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
DIM PROFILE DOOR HAND PIR TD
Scan to view
documentation and
resources:
MTM DIY
10.20
Technical and mounting details Item number
Daylight white (4000k)
Cool white (6000k)
Warm white (3000k)
24V 2835 5mm IP20 5m Roll DIY-2835 > DW CW WW
Diode Size 2.8mm x 3.5mm
LEDs per metre 120
Voltage 24V DC
Dimensions: Energy (watts) 14.4 per/m
Width 5mm
Projection 2.5mm
Viewing Angle 150°
Waterproof Rating IP20
Dimmable Yes
Lumens (per/m) Daylight White - 1400
Cool White - 1500
Compatible with: Warm White - 1300
24V 60W Transformer: Max run 4m Transformer 24V Maximum run 8 meters
24V 90W Transformer: Max run 6m Cuttable 50mm increments
24V 120W Transformer: Max run 8m
Hand sensor: Max run 3m 60W only
Door sensor: Max run 3m 60W only
Double Door sensor: Max run 3m 60W only
PIR sensor: Max run 3m 60W only
Double PIR sensor: Max run 3m 60W only
Touch Dimmer: Max run 3m 60W only
Dimmer Controller: Max run 4m 60W, 6m 90W or 8m 120W
Dimmer Panel: Max run 16m 60W, 24m 90W or 32m 120W when used
with the Controller Box or the 5-in-1 Controller Box
Toggle Switch: Max run 4m 60W or 5m 90W only
• Very bright output
• Plug & Play installation
• Cuttable in 50mm increments
• Self-adhesive peel and stick backing with 3M tape
• Low power consumption
• Long-life LED diodes
• Recommended for use with 8mm Pluto Profiles (p. 31)
Note: LED strips can be bent but not distorted
LED Strip Lights
24V 2835 5mm
WARM WHITE (3200K) COOL WHITE (6000K) WARM WHITE (3200K)
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Narrow 5mm width in conjunction with
8mm Pluto profile is perfect for minimalist
applications
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
DIM PROFILE DOOR HAND PIR TD
Scan to view
documentation and
resources:
MTM DIY
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.21
LED Lighting
Technical and mounting details Item number
Daylight white (4000k)
Cool white (6000k)
Warm white (3000k)
24V 3014 Continuous IP20 5m Roll DIY-3014 > DW CW WW
Diode Size 3.0mm x 1.4mm
LEDs per metre 204
Voltage 24V DC
Dimensions: Energy (watts) 16.3 per/m
Width 10mm
Projection 3mm
Viewing Angle 120°
Waterproof Rating IP20
Dimmable Yes
Lumens (per/m) Daylight White - 1890
Cool White - 2040
Compatible with: Warm White - 1590
24V 60W Transformer: Max run 3.5m Transformer 24V Maximum run 7 meters
24V 90W Transformer: Max run 5m Cuttable 30mm increments
24V 120W Transformer: Max run 7m
Hand sensor: Max run 2.5m 60W only
Door sensor: Max run 2.5m 60W only
Double Door sensor: Max run 2.5m 60W only
PIR sensor: Max run 2.5m 60W only
Double PIR sensor: Max run 2.5m 60W only
Touch Dimmer: Max run 2.5m 60W only
Dimmer Controller: Max run 3m 60W, 5m 90W or 7m 120W
Dimmer Panel: Max run 12m 60W, 20m 90W or 28m 120W when used
with the Controller Box or 5-in-1 Controller Box
Toggle Switch: Max run 3.5m 60W only
• Provides a no dotting effect when used with an LED profile
• High brightness with continuous glow
• Plug & Play installation
• Cuttable in 30mm increments
• Self-adhesive peel and stick backing with 3M tape
• Recommended to be used in conjunction with an LED profile
which assists with heat dissipation & ensures longevity of the LED
diodes
LED Strip Lights
24V 3014 Continous
WARM WHITE (3200K) COOL WHITE (6000K) WARM WHITE (3200K)
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Use the 3014 strip light with an LED
profile for a bright, steady glow without
dots when used with a profile and opaque
diffuser
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
DIM PROFILE DOOR HAND PIR TD
Scan to view
documentation and
resources:
MTM DIY
10.22
Technical and mounting details Item number Variable
24V 5050 RGBW Colour IP20 5m Roll DIY-5050 > RGBW
Diode Size 5.0mm x 5.0mm
LEDs per metre 60
Voltage 24V DC
Dimensions: Energy (watts) 10 per/m
Width 10mm
Projection 3mm
Viewing Angle 120°
Waterproof Rating IP20
Dimmable Yes
Lumens (per/m) 700
Transformer 24V Maximum run 12 meters
Compatible with: Cuttable 170mm increments
24V 60W Transformer: Max run 6m
24V 90W Transformer: Max run 9m
24V 120W Transformer: Max run 12m
RGBW Controller: Max run 5m 60W, 8m 90W or 11m 120W when used
in conjunction with compatible RGBW controller box
RGBW Panel: Max run 20m 60W, 32m 90W or 40m 120W when used in
conjunction with compatible RGBW controller box
• Adjust colour and effects with 20 different mode settings
• Alternates between all LED colours, including Cool White
• Plug & Play installation
• Cuttable in 170mm increments
• Memory saves previous settings when powered back on
• Self-adhesive peel and stick backing
• Recommended for use with LED profiles
Note: Requires the RGBW Panel (p 10.39) or RGBW Controller
(p.10.38) with Controller Box or 5-in-1 Controller Box
LED Strip Lights
24V 5050 RGBW Colour
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Ideal for decorative feature lighting, create
dazzling effects with the adjustable colour
spectrum
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
DIM PROFILE
COOL WHITE (6000K)
Scan to view
documentation and
resources:
MTM DIY
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.23
LED Lighting
Technical and mounting details Item number
Daylight white (4000k)
Cool white (6000k)
Warm white (3000k)
12V 5050 Bright IP20 5m Roll DIY-5050 > DW CW WW
Diode Size 5.0mm x 5.0mm
LEDs per metre 60
Voltage 12V DC
Dimensions: Energy (watts) 14.4 per/m
Width 10mm
Projection 3mm
Viewing Angle 120°
Waterproof Rating IP20
Dimmable Yes
Lumens (per/m) Daylight White - 900
Cool White - 900
Compatible with: Warm White - 900
12V 25W Transformer: Max run 1.5m Transformer 12V Maximum run 4 meters
12V 60W Transformer: Max run 4m Cuttable 50mm increments
Hand sensor: Max run 1.5m 25W or 1.5m 60W
Door sensor: Max run 1.5m 25W or 1.5m 60W
Double Door sensor: Max run 1.5m 25W or 1.5m 60W
PIR sensor: Max run 1.5m 25W or 1.5m 60W
Double PIR sensor: Max run 1.5m 25W or 1.5m 60W
Touch Dimmer: Max run 1.5m 25W or 1.5m 60W
Dimmer Controller: Max run 1.5m 25W or 4m 60W
Dimmer Panel: Max run 6m 25W or 16m 60W when used with
compatible Controller Box or 5-in-1 Controller Box
Toggle Switch: Max run 1.5m 25W or 4m 60W
• Up to three times brighter than 3528 Standard Strip Light
• Plug & Play installation
• Cuttable in 50mm increments
• Self-adhesive peel and stick backing
• Best suited for an area hidden from view
• Recommended to be used in conjunction with an LED profile
which assists with heat dissipation & ensures longevity of the LED
diodes
LED Strip Lights
12V 5050 Bright
WARM WHITE (3200K) COOL WHITE (6000K) WARM WHITE (3200K)
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
An extra bright strip light for enhanced
luminosity
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
DIM PROFILE DOOR HAND PIR TD
Scan to view
documentation and
resources:
MTM DIY
10.24
Technical and mounting details Item number
Daylight white (4000k)
Cool white (6000k)
Warm white (3000k)
12V 3528 Standard IP65 5m Roll DIY-3528-IP65 > DW CW WW
Diode Size 3.5mm x 2.8mm
LEDs per metre 60
Voltage 12V DC
Dimensions: Energy (watts) 4.8 per/m
Width 8mm
Projection 3mm
Viewing Angle 120°
Waterproof Rating IP65
Dimmable Yes
Lumens (per/m) Daylight White - 300
Cool White - 300
Compatible with: Warm White - 300
12V 25W Transformer: Max run 5m Transformer 12V Maximum run 10 meters
12V 60W Transformer: Max run 10m Cuttable 50mm increments
Hand sensor: Max run 3m 25W or 5m 60W
Door sensor: Max run 3m 25W or 5m 60W
Double Door sensor: Max run 3m 25W or 5m 60W
PIR sensor: Max run 3m 25W or 5m 60W
Double PIR sensor: Max run 3m 25W or 5m 60W
Touch Dimmer: Max run 3m 25W or 5m 60W
Dimmer Controller: Max run 5m 25W or 12m 60W
Dimmer Panel: Max run 5m 25W or 12m 60W
Toggle Switch: Max run 5m 25W or 12m 60W
• Plug & Play installation
• Cuttable in 50mm increments
• Self-adhesive peel and stick backing
• Best suited for an area hidden from view
• Clear, water resistant coating
• Recommended for strip light only options
LED Strip Lights
12V 3528 Standard IP65
WARM WHITE (3200K) COOL WHITE (6000K)
DIM DOOR HAND PIR TD
WARM WHITE (3200K)
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
A water resistant strip light suitable for
bathroom and vanity applications
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Scan to view
documentation and
resources:
MTM DIY
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.25
LED Lighting
Technical and mounting details Item number
Daylight white (4000k)
Cool white (6000k)
Warm white (3000k)
Blue (NZ Only)
Red (NZ Only)
Green (NZ Only)
Amber (NZ Only)
12V 3528 Standard IP20 5m Roll DIY-3528 > DW CW WW BLUE RED GREEN AMBER
Diode Size 3.5mm x 2.8mm
LEDs per metre 60
Voltage 12V DC
Dimensions: Energy (watts) 4.8 per/m
Width 8mm
Projection 3mm
Viewing Angle 120°
Waterproof Rating IP20
Dimmable Yes
Lumens (per/m) Daylight White - 300
Cool White - 300
Compatible with: Warm White - 300
12V 25W Transformer: Max run 5m Amber - 65
12V 60W Transformer: Max run 10m Blue - 45
Hand sensor: Max run 3m 25W or 5m 60W Green - 200
Door sensor: Max run 3m 25W or 5m 60W Red - 110
Double Door sensor: Max run 3m 25W or 5m 60W Transformer 12V Maximum run 10 meters
PIR sensor: Max run 3m 25W or 5m 60W Cuttable Cuttable 50mm increments
Double PIR sensor: Max run 3m 25W or 5m 60W
Touch Dimmer: Max run 3m 25W or 5m 60W
Dimmer Controller: Max run 5m 25W or 12m 60W
Dimmer Panel: Max run 5m 25W or 12m 60W
Toggle Switch: Max run 5m 25W or 12m 60W
• Plug & Play installation
• Cuttable in 50mm increments
• Self-adhesive peel and stick backing
• Best suited for an area hidden from view
• Choose any LED Profile option
• Recommended to be used in conjunction with an LED profile
which assists with heat dissipation & ensures longevity of the LED
diodes
LED Strip Lights
12V 3528 Standard
WARM WHITE BLUE RED GREEN AMBER (3200K) COOL WHITE (6000K)
DIM PROFILE DOOR HAND PIR TD
WARM WHITE (3200K)
All DIY components are supplied separately and are recommended for strip light only
options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
An everyday strip light ideal for standard
under cabinetry applications.
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Scan to view
documentation and
resources:
MTM DIY
10.26
Technical and mounting details Item number Strip Light
Profile length (mm)
Profile Finish
Pendant Profile PENDANT-600-RGBW-FS RGBW 5050 600 Silver
PENDANT-1200-RGBW-FS RGBW 5050 1200 Silver
PENDANT-1800-RGBW-FS RGBW 5050 1800 Silver
PENDANT-600-RGBW-MB RGBW 5050 600 Black
PENDANT-1200-RGBW-MB RGBW 5050 1200 Black
PENDANT-1800-RGBW-MB RGBW 5050 1800 Black
PENDANT-600-CW/WW-FS 3527 CW/WW 600 Silver
PENDANT-1200-CW/WW-FS 3527 CW/WW 1200 Silver
PENDANT-1800-CW/WW-FS 3527 CW/WW 1800 Silver
PENDANT-600-CW/WW-MB 3527 CW/WW 600 Black
PENDANT-1200-CW/WW-MB 3527 CW/WW 1200 Black
PENDANT-1800-CW/WW-MB 3527 CW/WW 1800 Black
PENDANT-600-COB528CW-FS COB528-CW 600 Silver
PENDANT-1200-COB528CW-FS COB528-CW 1200 Silver
PENDANT-1800-COB528CW-FS COB528-CW 1800 Silver
PENDANT-600-COB528CW-MB COB528-CW 600 Black
PENDANT-1200-COB528CW-MB COB528-CW 1200 Black
PENDANT-1800-COB528CW-MB COB528-CW 1800 Black
Dimensions: PENDANT-600-COB528WW-FS COB528-WW 600 Silver
PENDANT-1200-COB528WW-FS COB528-WW 1200 Silver
PENDANT-1800-COB528WW-FS COB528-WW 1800 Silver
PENDANT-600-COB528WW-MB COB528-WW 600 Black
PENDANT-1200-COB528WW-MB COB528-WW 1200 Black
PENDANT-1800-COB528WW-MB COB528-WW 1800 Black
: PENDANT-600-COB528DW-FS COB528-DW 600 Silver
PENDANT-1200-COB528DW-FS COB528-DW 1200 Silver
PENDANT-1800-COB528DW-FS COB528-DW 1800 Silver
PENDANT-600-COB528DW-MB COB528-DW 600 Black
PENDANT-1200-COB528DW-MB COB528-DW 1200 Black
PENDANT-1800-COB528DW-MB COB528-DW 1800 Black
• Profile can be suspended from ceiling above island benchtops
• Available in three profile lengths and two finishes
• Select your length, 24V strip light option and profile finish for a
complete pendant profile lighting fixture
• Supplied with opaque diffuser and suspension kit
• Aluminium profile provides heat sink for high powered LEDs
LED Profiles
Pendant Profile
Create unique lighting features with the
pendant profile. Use the connectors to
join profile lengths for intricate statement
pieces
Scan to view
documentation and
resources:
DIY
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.27
LED Lighting
Technical and mounting details Item number
Clear Diffuser (AUS only)
Opaque Diffuser
Tinted Diffuser (AUS only)
LED Micro Profile 2m Length DIY-MICRO > CL OP
3m Length DIY-MICRO > CL-3M OP-3M TI-3M
Dimensions:
LED Micro Profile Matt Black 2m Length DIY-MICRO > CL-MB OP-MB
3m Length DIY-MICRO > CL-MB-3M OP-MB-3M TI-MB-3M
Dimensions:
• Surface or recess mount installation
• Supplied with an opaque, tinted or clear diffuser
• Profile can be glued, screwed or clipped on using mounting clips
supplied
• Recess depth 7mm
LED Profiles
Micro Profile
Create a streamlined finish with improved
heat dissipation and a condensed profile
for minimalist applications
17.5mm
8mm
17.5mm
8mm
Scan to view
documentation and
resources:
MTM DIY
10.28
Technical and mounting details Item number
Clear Diffuser (AUS only)
Opaque Diffuser
Tinted Diffuser (AUS only)
LED Slimline Profile 2m Length DIY-SLIM > CL OP
3m Length DIY-SLIM > CL-3M OP-3M TI-3M
Dimensions:
LED Slimline Profile Matt Black 2m Length DIY-SLIM > CL-MB OP-MB
3m Length DIY-SLIM > CL-MB-3M CL-MB-3M TI-MB-3M
Dimensions:
• Recess mount installation
• Supplied with an opaque, tinted or clear diffuser
• Profile can be screwed or glued into rebate
• Recess depth 7.5mm
LED Profiles
Slimline Profile
Create a streamlined finish with improved
heat dissipation and a shallow 8mm height
24mm
8mm 6mm
17.5mm
24mm
8mm 6mm
17.5mm
Scan to view
documentation and
resources:
MTM DIY
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.29
LED Lighting
Technical and mounting details Item number
Clear Diffuser (AUS only)
Opaque Diffuser
Tinted Diffuser (AUS only)
LED Square Fusion Profile 2m Length DIY-SQ > CL OP
3m Length DIY-SQ > CL-3M OP-3M TI-3M
Dimensions:
LED Square Fusion Profile Matt
Black
2m Length DIY-SQ > CL-MB OP-MB
3m Length DIY-SQ > CL-MB-3M OP-MB-3M TI-MB-3M
Dimensions:
• Surface or recess mount installation
• Supplied with an opaque, tinted or clear diffuser
• Profile can be glued, screwed or clipped on using mounting clips
supplied
• Recess depth 15.5mm
• Recommended for applications sandwiched between two 16mm
boards, without need for recessing
LED Profiles
Square Fusion Profile
Create a streamlined finish with improved
heat dissipation
Scan to view
documentation and
resources:
MTM DIY
10.30
Technical and mounting details Item number
Clear Diffuser (AUS only)
Opaque Diffuser
Tinted Diffuser (on request)
LED Corner Profile 2m Length DIY-CORNER > CL OP
3m Length DIY-CORNER > CL-3M OP-3M TI-3M
Dimensions:
LED Corner Profile Matt Black 2m Length DIY-CORNER > CL-MB OP-MB
3m Length DIY-CORNER > CL-MB-3M OP-MB-3M TI-MB-3M
Dimensions:
• Surface mount installation
• Supplied with an opaque, tinted or clear diffuser
• Top or side fixing
• Profile can be screwed on, glued or clipped on using mounting
clips
LED Profiles
Corner Profile
Create a streamlined finish with improved
heat dissipation in corner applications
Scan to view
documentation and
resources:
MTM DIY
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.31
LED Lighting
Technical and mounting details Item number
Opaque Diffuser
8mm Pluto Profile 2m Length DIY-PLUTO > OP
Dimensions:
• For use with 2835 5mm LED strip lights only (p. 10.20)
• Supplied with opaque diffuser
• Lightweight and ultra slim plastic channel features a sleek, onepiece integrated design cuttable to any length
LED Profiles
8mm Pluto Profile
For direct light applications, the built-in
LED diffuser helps smooth out the light
and reduce hot spots
Scan to view
documentation and
resources:
MTM DIY
10.32
Why Your Diffuser
Matters
Opaque Diffuser
· Gentle glow
· Uniform light distribution
· Non-dotted with certain strip
light options
Clear Diffuser
· Maximum brightness
· Visible diodes
· Transparent
Tinted Diffuser
· Opaque black tint
· Best suited for darker kitchens
and aesthetics
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.33
Ambience
· Choosing the right diffuser for
your needs can drastically alter
the look and feel of your space
Longevity
· When used with an LED profile,
diffusers help to extend the
longevity of your LED diodes
Safety
· When used with an LED Profile,
diffusers work to protect your
LED diodes from dust and
ingress, as well as assist with
heat dissipation
10.34
Technical and mounting details Item number
Daylight white (4000k)
Cool white (6000k)
Warm white (3000k)
Matt Black Finish
Brushed Nickel Finish
Silver Finish
24V Imperia Downlight 612.8D20 > 003 > 001 > 002 > 007 004 003
612.8D20 > 003 > 001 > 002 > 007 004 003
612.8D20 > 003 > 001 > 002 > 007 004 003
Bracket 612.8D20.000 > 007 004
Bracket IMPERIA > BRACKET
Eg. 612.8D20.003.007 for Daylight White and Matt Black finish
Dimensions: Finish Silver, Matt Black or Brushed Nickel
LEDs per metre 1x COB
Voltage 24V DC
Energy (watts) 3 per/m
Width 5mm
Projection 10mm
Beam Angle 120°
Dimmable Yes
Compatible with: Hole cut-out size 54mm
24V 60W Transformer: Max run 6 lights Transformer 24V Maximum run 6 lights
24V 90W Transformer: Max run 6 lights
24V 120W Transformer: Max run 6 lights
Hand sensor: Max run 6 lights
Door sensor: Max run 6 lights
Double Door sensor: Max run 6 lights
PIR sensor: Max run 6 lights
Double PIR sensor: Max run 6 lights
Touch Dimmer: Max run 6 lights
Dimmer Controller: Max run 6 lights
Dimmer Panel: Max run up to 24 lights using 4x transformers and 4x
control units
Toggle Switch: Max run 6 lights
• Plug & Play installation
• Generous 2m lead
• Optional surface mount bracket
• Lifetime of 30,000 hours
• Dimmable
LED Downlights
24V Imperia
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
A stunning bright downlight which features
a single internal LED cob chip. Recess
or surface mount underneath or inside
cabinetry to brightly illuminate a space.
Ø62.0
Ø54.0
10
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
DIM DOOR HAND PIR TD
Ø62.0
12.5
Recess mounted Surface mounted
WARM WHITE (3200K) COOL WHITE (6000K) WARM WHITE (3200K)
Scan to view
documentation and
resources:
MTM DIY
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.35
LED Lighting
Technical and mounting details Item number
Daylight white (4000k)
Cool white (6000k)
Warm white (3000k)
12V Imperia Downlight IMPERIA > DW CW WW
IMPERIA-BRACKET Surface mount bracket
Finish Silver
LEDs per metre 1x COB
Voltage 12V DC
Dimensions: Energy (watts) 3.2 per/m
Width 5mm
Projection 10mm
Beam Angle 120°
Dimmable Yes
Hole cut-out size 54mm
Transformer 12V Maximum run 6 lights
Compatible with:
12V 25W Transformer: Max run 6 lights
12V 60W Transformer: Max run 6 lights
Hand sensor: Max run 6 lights
Door sensor: Max run 6 lights
Double Door sensor: Max run 6 lights
PIR sensor: Max run 6 lights
Double PIR sensor: Max run 6 lights
Touch Dimmer: Max run 6 lights
Dimmer Controller: Max run 6 lights
Dimmer Panel: Max run up to 24 lights using 4x transformers and 4x
control units
Toggle Switch: Max run 6 lights
• Plug & Play installation
• Generous 2m lead
• Optional surface mount bracket
• Lifetime of 30,000 hours
• Dimmable
LED Downlights
12V Imperia
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
A stunning bright downlight which features
a single internal LED cob chip. Recess
or surface mount underneath or inside
cabinetry to brightly illuminate a space.
Ø62.0
Ø54.0
10
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
DIM DOOR HAND PIR TD
Ø62.0
12.5
Recess mounted Surface mounted
Scan to view
documentation and
resources:
WARM WHITE (3200K) COOL WHITE (6000K) WARM WHITE (3200K)
MTM DIY
10.36
Technical and mounting details Item number Description
5-in-1 Controller Box 612.8S07.101.004 Controller box
Input Voltage DC 12V/24V
Total Output Max 15A
Dimensions Length 125mm
Width 33mm
Height 20mm
Functions Dimmer Control
RGBW Control
Dimensions Dual Tone Tuneable Control
Google Home Voice Activation
Amazon Alexa Voice Activation
Compatible with:
• Smart home connectivity enabled
• 2.4G wireless connectivity
• Control distance up to 30m
• Works with RGBW and colour tuneable strip lights and
corresponding remote panels
• Compatible with all 12V and 24V strip lights, remote panels and
downlights
• 5-in-1 compatibility can replace standard controller box
LED Sensors & Panels
5-in-1 Controller Box
Compatible with Google Assistant and
Amazon Alexa voice control
* Requires additional transformers and controller boxes to reach max
run indicated.
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
125mm
33mm
20mm
Scan to view
documentation and
resources:
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.37
LED Lighting
Technical and mounting details Item number Description
Dimmer Remote Panel 612.8S07.100.001 Remote panel
612.8S07.101.001 Controller box
Dimensions
Compatible with (by transformer):
12V 3528 IP20: Max run 5m 25W or 12m 60W
12V 3528 IP65: Max run 5m 25W or 12m 60W
12V 5050 Extra Bright: Max run 6m 25W or 16m 60W*
24V 3014 IP20: Max run 12m 60W, 20m 90W or 28m 120W*
24V 2835 5mm: Max run 16m 60W, 24m 90W or 32m 120W*
24V COB 528 8mm: Max run 22m 60W, 34m 90W or 46m 120W*
12V Imperia Downlights: Max run up to 24 lights*
24V Imperia Downlights: Max run up to 24 lights*
• Plug & Play installation
• 4-way multi-channel with 5-in-1 compatibility
• Brightness dimmer
• 60sec switch off delay
• Sensitive touch and scratch resistant
• 2.4G wireless connectivity
• 30m distance control
• Battery operated (2x AAA)
• Compatible with all single colour 12V and 24V strip lights and
downlights
LED Sensors & Panels
Dimmer Panel
Wall mount or use as a hand-held device
to control the intensity of single-colour
strip lights and downlights
* Requires additional transformers and controller boxes to reach max
run indicated.
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Scan to view
documentation and
resources:
10.38
Technical and mounting details Item number Description
Colour Tuneable Remote Panel 612.8S07.100.002 Remote panel
612.8S07.101.002 Controller box
Dimensions
Compatible with (by transformer):
24V 3527 Tuneable: Max run 24m 60W, 18m 90W or 24m 120W
when shared across four channels and controller boxes
• Colour temperature control
• 4-way multi-channel with 5-in-1 compatibility
• Brightness dimmer
• 60sec switch off delay
• Sensitive touch and scratch resistant
• 2.4G wireless connectivity
• 30m distance control
• Battery operated (2x AAA)
• Compatible with 24V 3527-WW/CW strip lights (p. 10.18)
LED Sensors & Panels
Tuneable Remote Panel
DUAL
TONE
Wall mount or use as a hand-held device
to control the colour temperature of the
3527 tuneable strip light
Scan to view
documentation and
resources:
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.39
LED Lighting
Technical and mounting details Item number Description
RGBW Remote Panel 612.8S07.100.003 Remote panel
612.8S07.101.003 Controller box
Dimensions
Compatible with (by transformer):
24V 5050 RGBW: Max run 40m 60W, 32m 90W or 40m 120W when
shared across four channels and controller boxes
• Colour spectrum control with white channel
• 4-way multi-channel with 9 colour changing modes
• Brightness dimmer
• 60sec switch off delay
• Sensitive touch and scratch resistant
• 2.4G wireless connectivity
• 30m distance control
• Battery operated (2x AAA)
• Compatible with 24V 5050 RGBW strip lights (p. 10.22)
LED Sensors & Panels
RGBW Remote Panel
Wall mount or use as a hand-held device
to control the colour changes for the 24V
5050 RGBW strip light
Scan to view
documentation and
resources:
10.40
Technical and mounting details Item number Description
RGBW Controller RGBW-CCU Remote controller
Dimensions
Compatible with (by transformer):
24V 5050 RGBW: Max run 5m 60W, 8m 90W or 11m 120W
• Colour spectrum control with white channel
• 24V with max load 144 watts
• Brightness dimmer
• Includes remote, batteries and wall mount bracket
• 30m distance control
• Battery operated (2x AAA)
• Compatible with 24V 5050-RGBW strip lights (p. 10.22)
LED Sensors & Panels
RGBW Controller
Wall mount or use as a hand-held device
to control the colour changes for the 24V
5050 RGBW strip light
Remote controller Controller box
Scan to view
documentation and
resources:
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.41
LED Lighting
Technical and mounting details Item number Description
Dimmer Remote LED-DIM Dimmer controller
Dimensions
Compatible with (by transformer):
12V 3528 IP20: Max run 5m 25W or 12m 60W
12V 3528 IP65: Max run 5m 25W or 12m 60W
12V 5050 Extra Bright: Max run 1.5m 25W or 4m 60W
24V 3014 IP20: Max run 3m 60W, 5m 90W or 7m 120W
24V 2835 5mm: Max run 4m 60W, 6m 90W or 8m 120W
24V COB 528 8mm: Max run 5m 60W, 8m 90W or 11m 120W
12V Imperia Downlights: Max run up to 6 lights
24V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• On/Off switch function
• Brightness dimmer
• 12V max load 60 watts and 24V max load 120 watts
• Includes remote, batteries and wall mount bracket
• 2.4G wireless connectivity
• 30m distance control
• Battery operated (2x AAA)
• Compatible with all single colour 12V and 24V strip lights and
downlights
LED Sensors & Panels
Dimmer Remote
Wall mount or use as a hand-held device
to control the intensity of single-colour
strip lights and downlights
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Remote controller Controller box
Scan to view
documentation and
resources:
10.42
Technical and mounting details Item number Description
Touch Dimmer SS-DIM-K Dimmer controller
Dimensions
Compatible with (by transformer):
12V 3528 IP20: Max run 3m 25W or 5m 60W
12V 3528 IP65: Max run 3m 25W or 5m 60W
12V 5050 Extra Bright: Max run 1.5m 25W or 1.5m 60W
24V 3014 IP20: Max run 2.5m 60W only
24V 2835 5mm: Max run 3m 60W only
24V COB 528 8mm: Max run 4.5m 60W only
12V Imperia Downlights: Max run up to 6 lights
24V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• On/Off switch function
• Brightness dimmer
• 12V max load 24 watts and 24V max load 48 watts
• Activated by touch
• Silver finish
• Surface or recess mount
• Compatible with all single colour 12V and 24V strip lights and
downlights
LED Sensors & Panels
Touch Dimmer
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Touch control add-on for dimming single
colour strip lights and Imperia downlights
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Surface mount Recess mount
16mm
Ø30.5mm
14mm
24mm
Ø10mm hole
Scan to view
documentation and
resources:
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.43
LED Lighting
Technical and mounting details Item number Description
Door Sensor SS-D-SINGLE-K Single door sensor with 6-way junction box
SS-D-DOUBLE-K Double door sensor with 6-way junction box
Dimensions
Compatible with (by transformer):
12V 3528 IP20: Max run 5m 25W or 12m 60W
12V 3528 IP65: Max run 5m 25W or 12m 60W
12V 5050 Extra Bright: Max run 1.5m 25W or 4m 60W
24V 3014 IP20: Max run 3m 60W, 5m 90W or 7m 120W
24V 2835 5mm: Max run 4m 60W, 6m 90W or 8m 120W
24V COB 528 8mm: Max run 5m 60W, 8m 90W or 11m 120W
12V Imperia Downlights: Max run up to 6 lights
24V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• Open and close door to activate and deactivate
• 12V max load 24 watts and 24V max load 48 watts
• 100mm approx. detection area
• Surface mounted 5mm back
• White finish
• Compatible with all single colour 12V and 24V strip lights and
downlights
LED Sensors & Panels
Door Sensor
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Add energy efficient convenience to
your lighting with a door sensor to
automatically activate lights when doors
are opened
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
9.0
13.0
65.0
23.0
7.5
18.5
Scan to view
documentation and
resources:
Product Name: Movement Sensor Switch
Product description: This Movement Sensor Switch is an exclusively design for Class III insulation appliance.
Function description: when the target object is in the detecting range one time, the lamp switches on (off),
when the target objects is in the detecting range second time, the lamp will be switch off(on).
Specifications:
Installation Instructions:
1. As shown
egatloV gnikroW V21CD V42CD
daoL mumixaM W42 W84
tnerruC tnecseiuQ Am6 Am6
Working Temperature -20 — +450
C -20 — +450
C
egnaR evitceffE MC51< MC51<
<10cm
10.44
Technical and mounting details Item number Description
Hand Sensor SS-H-K Hand sensor with 6-way junction box
Dimensions
Compatible with (by transformer):
12V 3528 IP20: Max run 5m 25W or 12m 60W
12V 3528 IP65: Max run 5m 25W or 12m 60W
12V 5050 Extra Bright: Max run 1.5m 25W or 4m 60W
24V 3014 IP20: Max run 3m 60W, 5m 90W or 7m 120W
24V 2835 5mm: Max run 4m 60W, 6m 90W or 8m 120W
24V COB 528 8mm: Max run 5m 60W, 8m 90W or 11m 120W
12V Imperia Downlights: Max run up to 6 lights
24V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• Wave hand within detection area to activate and deactivate
• 12V max load 24 watts and 24V max load 48 watts
• 100mm approx. detection area
• Surface or recess mounted
• Recess depth 14mm
• White finish
• Compatible with all single colour 12V and 24V strip lights and
downlights
LED Sensors & Panels
Hand Sensor
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Add energy efficient convenience to your
lighting with a hand sensor to activate
lights with a wave of your hand
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
30.0
15.0
20.0
Product Name: Movement Sensor Switch
Product description: This Movement Sensor Switch is an exclusively design for Class III insulation appliance.
Function description: when the target object is in the detecting range one time, the lamp switches on (off),
when the target objects is in the detecting range second time, the lamp will be switch off(on).
Specifications:
Installation Instructions:
1. As shown
egatloV gnikroW V21CD V42CD
daoL mumixaM W42 W84
tnerruC tnecseiuQ Am6 Am6
Working Temperature -20 — +450
C -20 — +450
C
egnaR evitceffE MC51< MC51<
<10cm
Ø16mm hole
Scan to view
documentation and
resources:
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.45
LED Lighting
Technical and mounting details Item number Description
PIR Sensor SS-PIR-SINGLE-K Single PIR sensor with 6-way junction box
SS-PIR-DOUBLE-K Double PIR sensor with 6-way junction box
Dimensions
Compatible with (by transformer):
12V 3528 IP20: Max run 5m 25W or 12m 60W
12V 3528 IP65: Max run 5m 25W or 12m 60W
12V 5050 Extra Bright: Max run 1.5m 25W or 4m 60W
24V 3014 IP20: Max run 3m 60W, 5m 90W or 7m 120W
24V 2835 5mm: Max run 4m 60W, 6m 90W or 8m 120W
24V COB 528 8mm: Max run 5m 60W, 8m 90W or 11m 120W
12V Imperia Downlights: Max run up to 6 lights
24V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• Move in and out of detection area to activate and deactivate
• 12V max load 24 watts and 24V max load 48 watts
• 1m approx. detection area
• Surface or recess mounted
• Recess depth 11mm
• White finish
• Automatic switch off after 45 seconds
• Compatible with all single colour 12V and 24V strip lights and
downlights
LED Sensors & Panels
PIR Sensor
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Add energy efficient convenience to your
lighting with a PIR sensor to automatically
activate lights when you enter the
detection area
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
20.0
65.0
9.0 13.0
30.0
21.0
Product Name: 96638/96638B PIR Sensor Switch
Product description: This type of PIR sensor switch is an exclusively design for class III insulation appliance.
Function description: When detected the human body move within the detection range, the switch will turn on,
when the body left the detection range for 45s, the switch will turn off automatically.
Specifications:
egatloV gnikroW V21CD V42CD
daoL mumixaM W42 W84
tnerruC tnecseiuQ Am6.0 Am6.0
Working Temperature -20 — +450
C -20 — +450
C
egnaR evitceffE M5.1< M5.1<
Detection Angle 110o 011 o
emiT yaleD s54 s54
<1m
ø16 Detection Area
Scan to view
documentation and
resources:
10.46
Technical and mounting details Item number Description
Toggle Switch SS-TOGGLE-K Single switch with 6-way junction box
Compatible with (by transformer):
12V 3528 IP20: Max run 5m 25W or 12m 60W
12V 3528 IP65: Max run 5m 25W or 12m 60W
12V 5050 Extra Bright: Max run 1.5m 25W or 4m 60W
24V 3014 IP20: Max run 3m 60W, 5m 90W or 7m 120W
24V 2835 5mm: Max run 4m 60W, 6m 90W or 8m 120W
24V COB 528 8mm: Max run 5m 60W, 8m 90W or 11m 120W
12V Imperia Downlights: Max run up to 6 lights
24V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• Toggle switch to turn light on or off
• 12V max load 72 watts and 24V max load 144 watts
• Recess mounting
• Recess depth 20mm
• Black finish
• Compatible with all single colour 12V and 24V strip lights
LED Sensors & Panels
Toggle Switch
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Add-on toggle switch for use with single
colour 12V and 24V strip lights and
Imperia downlights
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Scan to view
documentation and
resources:
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.47
LED Lighting
Technical and mounting details Item number Description
12V-25W Transformer TF-25-12K Transformer with 6-way junction box
AC Input Voltage 100-240VAC 50-60Hz, 1.0A Max
DC Output 12V DC 2.08A Constant Voltage
Output Watts Max 25 Watts
Dimensions Length 98mm
Width 46mm
Height 31mm
Compatible with:
12V 3528 IP20: Max run 5m 25W
12V 3528 IP65: Max run 5m 25W
12V 5050 Extra Bright: Max run 1.5m 25W
12V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• 1.5m input power cord
• Short-circuit, overload, over-voltage, over-heat protections
LED Sensors & Panels
12V-25W Transformer
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Power your lighting safely and efficiently.
Compatible with 12V lighting products
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Scan to view
documentation and
resources:
10.48
Technical and mounting details Item number Description
12V-60W Transformer TF-60-12K Transformer with 6-way junction box
AC Input Voltage 100-240VAC 50-60Hz, 1.5A Max
DC Output 12V DC 5.0A Constant Voltage
Output Watts Max 60 Watts
Dimensions Length 114mm
Width 51mm
Height 36mm
Compatible with:
12V 3528 IP20: Max run 10m 60W
12V 3528 IP65: Max run 10m 60W
12V 5050 Extra Bright: Max run 4m 60W
12V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• 1.5m input power cord
• Short-circuit, overload, over-voltage, over-heat protections
LED Sensors & Panels
12V-60W Transformer
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Power your lighting safely and efficiently.
Compatible with 12V lighting products
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Scan to view
documentation and
resources:
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.49
LED Lighting
Technical and mounting details Item number Description
12V-90W Transformer TF-90-12K Transformer with 6-way junction box
AC Input Voltage 100-240VAC 50-60Hz, 1.3A Max
DC Output 12V DC 6.67A Constant Voltage
Output Watts Max 80 Watts
Dimensions Length 139mm
Width 61mm
Height 36mm
Compatible with:
12V 3528 IP20: Max run 15m 90W
12V 3528 IP65: Max run 15m 90W
12V 5050 Extra Bright: Max run 6m 90W
12V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• 1.5m input power cord
• Short-circuit, overload, over-voltage, over-heat protections
LED Sensors & Panels
12V-90W Transformer
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Power your lighting safely and efficiently.
Compatible with 12V lighting products
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Scan to view
documentation and
resources:
10.50
Technical and mounting details Item number Description
24V-60W Transformer TF-60-24K Transformer with 6-way junction box
AC Input Voltage 110-240VAC 50-60Hz, 1.4A Max
DC Output 24V DC 2.50A Constant Voltage
Output Watts Max 60 Watts
Dimensions Length 114mm
Width 51mm
Height 36mm
Compatible with:
24V 3014 IP20: Max run 3.5m 60W
24V 2835 5mm: Max run 4m 60W
24V COB 528 8mm: Max run 6m 60W
24V 3527 Tuneable: Max run 3m 60W
24V 5050 RGBW: Max run 6m 60W
24V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• 1.5m input power cord
• Short-circuit, overload, over-voltage, over-heat protections
LED Sensors & Panels
24V-60W Transformer
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Power your lighting safely and efficiently.
Compatible with 24V lighting products
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Scan to view
documentation and
resources:
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.51
LED Lighting
Technical and mounting details Item number Description
24V-90W Transformer TF-90-24K Transformer with 6-way junction box
AC Input Voltage 110-240VAC 50-60Hz, 1.4A Max
DC Output 24V DC 3.75A Constant Voltage
Output Watts Max 90 Watts
Dimensions Length 139mm
Width 61mm
Height 36mm
Compatible with:
24V 3014 IP20: Max run 5m 90W
24V 2835 5mm: Max run 6m 90W
24V COB 528 8mm: Max run 9m 90W
24V 3527 Tuneable: Max run 4.5m 90W
24V 5050 RGBW: Max run 9m 90W
24V Imperia Downlights: Max run up to 6 lights
• Plug & Play installation
• 1.5m input power cord
• Short-circuit, overload, over-voltage, over-heat protections
LED Sensors & Panels
24V-90W Transformer
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
Power your lighting safely and efficiently.
Compatible with 24V lighting products
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Scan to view
documentation and
resources:
10.52
Technical and mounting details Item number Description
24V-120W Transformer TF-120-24K Transformer with 6-way junction box
AC Input Voltage 86VAC~264VAC/ 47Hz~63Hz/ 0.5A Max
DC Output 24V DC/ 5A
Output Watts Max 120 Watts
Dimensions Length 171mm
Width 72mm
Height 43mm
Compatible with:
24V 3014 IP20: Max run 7m 120W
24V 2835 5mm: Max run 8m 120W
24V COB 528 8mm: Max run 12m 120W
24V 3527 Tuneable: Max run 6m 120W
24V 5050 RGBW: Max run 12m 120W
• Plug & Play installation
• 1.5m input power cord
• Short-circuit, overload, over-voltage, over-heat protections
LED Sensors & Panels
24V-120W Transformer
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
A high capacity transformer to power your
lighting safely and efficiently. Compatible
with 24V lighting products
* If using the strip light in conjunction with a sensor or controller refer
to capacity guide > see page 10.56
Scan to view
documentation and
resources:
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.53
LED Lighting
Technical and mounting details Item number Description
DIY Connector DIY-CONNECT 16mm (L) x 12mm (W) strip light connector
Only compatible with 3528 strip light options (p. 10.24-10.25)
DIY Tail DIY-TAIL-V2 2m soldered tail
Only compatible with 3528 strip light options (p.10.24-10.25)
DIY Corner Connector DIY-CORNER 40mm wire between two connectors
Only compatible with 3528 strip light options (p.10.24-10.25)
2m Extension Cable EXT-V2 2m extension cable
• Plug & Play installation
• Compatible with the 12V 3528 IP20 and IP65 strip light options
• DIY connectors are not recommended for use with LED profiles
• DIY extension cables can be used with LED Imperia Downlights
and all strip lights
LED Sensors & Panels
DIY Accessories
All DIY components are supplied separately and are
recommended for strip light only options (no profile).
Available in a 5 meter roll & includes a tail soldered on each end.
10.54
Technical and mounting details Item number Cool white (5000k)
Luna Lithium Light 612.8L07.152 > 501
Finish Silver
Power Source Detachable lithium battery
Rechargeable Via micro USB cable
Dimensions: Energy (watts) 2W
Sensor Motion and light
Detection Area <2m / 120°
Viewing Angle 120°
Dimmable Yes
Wireless Yes
Touch Control Yes
Installation Magnetic strip with 3M tape
Material Aluminium and polycarbonate
Width 41.6mm
• Brightness intuitively adjusts to suit environment
• Motion and night sensor detects movement and ambient light for
energy-efficient activation, plus touch controls
• Automatic switch-off after 15 seconds without movement
detected
• Magnetic backing for easy installation
• Detachable, rechargeable lithium battery with easy magnetic
connection
• Wireless installation - no electrician required
Wireless Lighting
Lithium Battery Lighting
COOL WHITE (6000K)
Wireless lighting powered by a
rechargeable lithium battery - the Luna
Light is perfect for - but not limited to -
wardrobes, storage and retro-fitting hard
to reach cabinetry
DIM PIR TD
Scan to view
documentation and
resources:
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.55
LED Lighting
Technical and mounting details Item number
Built-in Wireless Charger CONNECT-1
Input Voltage USB DC 5V/12A 9V/2A
Wireless Output
Compatibility 5W / 7.5W / 10W / 15W
USB Output USB-A 5V / 2.4A
: USB-C 5V / 3A
USB-A + USB-C 5V / 3A
Standard Energy
Consumption < 10mA
Wireless range 110K - 205K Hz
Transfer Efficiency 72% max
Charger Proximity Within 6mm
Weight 50g
Hole cut-out 60mm
• Smart and convenient wireless charging
• Water resistance and pressure resistance
• Easy assembly
• Output: 15W
• 1 x USB-A & 1 x USB-C
• Includes adapter & 1.5m power cord
• Material: ABS and Polished Chrome
Connectivity
Built-in Wireless Charger
Wireless charging station for USB-A and
USB-C devices ideal for offices, hotels,
hospitality fitouts, airports and train
stations
10.56
Capacity Matrix
LED Sensors & Panels
Capacity Guide
Lighting
Option
Voltage Watts
per
metre
Transformer Sensors
or Touch
Dimmer
Dimmer
Controller
Dimmer
Panel*
Toggle
Switch
RGBW
Controller
RGBW
Panel
Tuneable
Panel
3528 12V
IP20
12V 4.8 12V-25W 3m 5m 5m 5m
12V-60W 5m 10m 10m 10m
12V-90W 5m 15m 15m 15m
3528 12V
IP65
12V 4.8 12V-25W 3m 5m 5m 5m
12V-60W 5m 12m 12m 12m
12V-90W 5m 15m 15m 15m
5050 12V 12V 14.4 12V-25W 1.5m 1.5m 6m 1.5m
12V-60W 1.5m 4m 16m 4m
12V-90W N/A 6m 6m 6m
3014 24V 24V 16.3 24V-60W 2.5 3m 12m 3m
24V-90W 5m 20m
24V-120W 7m 28m
2835 24V 24V 14.4 24V-60W 3m 4m 16m 4m
24V-90W 6m 24m 5m
24V-120W 8m 32m
COB 528
24V
24V 10 24V-60W 4.5m 5.5m 22m 6m
24V-90W 8.5m 34m 7m
24V-120W 11.5m 46m
3527 24V 24V 19.2 24V-60W 12m
24V-90W 18m
24V-120W 24m
RGBW
24V
24V 10 24V-60W 5m 20m
24V-90W 8m 32m
24V-120W 11m 40m
Imperia
12V
12V 3.2 12V-25W 6 Lights 6 Lights 24 Lights 6 Lights
12V-60W 6 Lights 6 Lights 24 Lights 6 Lights
12V-90W 6 Lights 6 Lights 24 Lights 6 Lights
Imperia
24V
24V 3 24V-60W 6 Lights 6 Lights 24 Lights 6 Lights
24V-90W 6 Lights 6 Lights 24 Lights 6 Lights
24V-120W
*Dimmer panel capacities shown are available when using 4x transformers and 4x control boxes
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.57
LED Lighting
FAQs
What length of strip lights can I
run off a transformer?
That depends on the energy consumed by your strip light and
whether or not you’re adding any accessories like sensors. For
a guide to strip light capacities, see page 10.56.
Do I need a 12V or a 24V
transformer?
The type of transformer you need will depend on the type of
lights you want to run. To avoid safety issues, stick to a 12V
transformer for 12V lights and a 24V transformer for 24V lights.
For an in-depth guide to capacities, see page 10.56.
How do I know what wattage
transformer I need (60W/90W
etc.)?
The transformer wattage will determine the amount of
power available to run your lights. The more power your
light consumes, the higher the wattage will need to be. For
information on how to calculate your total wattage, see page
10.7.
How many downlights can I run
off one transformer?
Whether 12V or 24V, you can run 6 downlights.
Can I put downlights and strip
lights on one transformer?
Yes, you can! As long as the total wattage of all your downlights
and strip lights is less than the wattage of the transformer. For
more information on calculating the minimum wattage, see
page 10.7.
Can one remote control two
or more lights from different
transformers/junction boxes?
Using our remote panels, you can operate four channels
per remote, each with its own transformer, junction box and
controller box.
What length is your LED strip
light? Do they come in 10m
lengths?
Currently all of our strip lights are available in 5m rolls, or cut to
size through our Made to Measure service.
Can your ribbon bend around a
curve or radius?
Yes, although there are limitation to the axis. For
more information, please consult your Technical Sales
Representative.
10.58
FAQs
What should I choose 24V strip
lights over 12V or vice versa?
- 24V systems consume more power than 12V, requiring a
higher capacity transformer and a larger power supply
- On the other hand, 24V transformers expel 13% less heat than
a 12V transformer, which improves the longevity
- This increased power also allows 24V systems to run power
through the strip for greater lengths than a 12V system before
you get any voltage drop.
What’s the difference between
the different shades of white?
What one should I choose?
The different white tones in lighting are measured on a
termperature spectrum. For more information on lighting
temperature, and how the different shades of white are
commonly used, please see page 10.8.
Can you cut anywhere on the
ribbon?
No, each strip light has a set cutting increment and each cutting
increment is clearly marked on the strip light with scissors
to help you determine where to cut. This helps prevent any
damage to the circuit or the LED diodes which would stop your
strip light from working.
What length are the LED
profiles?
We currently stock both 2m and 3m lengths in our standard
profiles. The pendant lighting profiles are available in 600mm,
1200mm and 1800mm lengths. The 8mm Pluto profile is
available in only the 2m length. Profiles can also be ordered cut
to size through our Made to Measure program.
Does the Lighting Profile
include mounting clips?
Yes, the Corner Profile, Micro Profile and Pluto Profile all
include three centre mounting clips per metre.
What are the rebate sizes? Both the Micro and Slimline profiles require a rebate 17mm
wide by 7.5mm deep. The Pluto profile requires an 8.5x8.5mm
rebate. For visual reference, please refer to the product pages.
Which profile should I use? The best profile to suit your application may vary, so it’s best
to speak to your Technical Sales Representative if you have
questions. A brief overview of common applications for each
profile can be found on page 10.17.
What are lumens? Lumens measure the amount of light you’re getting from a bulb.
The more lumens, the brighter the light. For more information,
please see page 10.7.
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.59
LED Lighting
FAQs
Do the strip lights dim? Can
your lights be connected to a
standard house dimmer switch?
Yes, all of our strip lights can be dimmed when used in
conjunction with a Stefano Orlati Remote Panel or Dimmer
Controller. Our strip lights are also compatible with wall
mounted rotary dimmers, however we do not supply a
dimmable AC transformer. Sourcing your own dimmable AC
transformer will void your warranty.
How do you set up the remote
panels, WiFi controllers or
sensors?
Instructions on setting up and operating all of our remote
panels, remote controllers and sensors can be found via our
website, or be scanning the QR code on the product page.
For more information, please contact your Technical Sales
Representative.
Do you have a bigger junction
box that will take more than six
plugs?
We do not currently have a junction box with more than six
plugs.
Do I have to order a junction
box?
A junction box will be supplied with each transformer
purchased, however they can also be ordered separately on
request.
What is the lead time on MTM
lighting?
Lead times vary by delivery area and can be dependent on
local freight companies. For more information on lead times
specific to your order, please contact your Technical Sales
Representative, otherwise the below guidelines apply:
- Metro: 3 to 5 business days from date of order
- Regional: 5 to 7 business days from date of order
How do I join light strips around
a corner?
We recommend using our Made to Measure service to ensure
all joins and corners are properly soldered and connected.
Otherwise, we also offer a DIY Corner Connector available for
use with the 3528 standard strip lights only.
Do you offer a fully waterproof
light suitable for outdoor use?
No, we do not currently offer a fully waterproof option.
How easy is DIY LED Lighting to
install?
Our range is a plug and play system, making it quite easy
to install. You can get in touch with your Technical Sales
Representative for more information.
10.60
FAQs
Will the lighting connect to my
home automation system?
For connection to a home automation system supplied by your
electrician, you will need a compatible transformer that works
with your system. Speak to your electrician for requirements.
Using any lights with a transformer not purchased through Titus
Tekform or Stefano Orlati will void your warranty.
Can you help with showroom
displays?
Yes, we would love to help with any showroom displays or
requirements! Please get in touch with your local branch to
discuss.
What do I need to make this
light work?
As our lighting products are plug and play, all you need is
the lighting product and a compatible transformer. Additional
accessories such as sensors and remotes can be added if
required.
Why choose Stefano Orlati
Lighting over other retailers or
online products?
While you may sometimes find LED strip lights available
cheaper elsewhere online, Stefano Orlati lighting products offer
consistent quality and product reliability. Our LED Lighting
uses high quality diodes which must pass rigorous quality
control procedures, as well as a consistency test on the kelvin
scale. All of our lighting includes our warranty, with an optional
extension and our lighting technicians are on hand to answer
any questions you may have.
Do the strip lights and
downlights overheat?
All lights expel some amount of heat, but nothing that should
burn you. Using an aluminium profile acts as a heat sink and
reduces the amount of heat radiating from the diodes, therefore
extending the life of your LED product.
What is the expected lifetime of
the lights?
Our LED lighting products can be expected to last between
30,000 and 50,000 hours, or about 10 years.
Why does my light not work? For any issues with the operation of your lighting, please
contact your Technical Sales Representative to discuss.
Are LED lights energy efficient? LEDs are currently the most energy efficient lighting technology.
For more information on lighting comparisons, please see page
10.7.
Download supporting documentation from the Titus Tekform website titustekform.com.au 10.61
LED Lighting
FAQs
How easy is DIY LED Lighting to
install?
Our range is a plug and play system, making it quite easy
to install. You can get in touch with your Technical Sales
Representative for more information.
Do you have LED strip lights
were the dots (diodes) are not
visible?
Our COB 528 strip light uses a chip-on-board panel similar to a
downlight and does not show any diodes. For more information,
see page 10.19. Alternatively, you can use our 3014 or 3527
strip lights with an LED profile and an opaque or tinted diffuser,
which won’t show any diodes at full brightness.
How long can I leave the LED
on for?
If you leave the LED lights on continuously, the life expectancy
of the LED diode will drop to the lower end of the scale, at
around 30,000 hours.
Are LED lights environmentally
friendly?
A longer lifespan means lower carbon emissions. LED lights
last up to six times longer than other types of lights, reducing
the need for frequent replacements. This results in using fewer
lights and hence fewer materials and less energy consumed
during the manufacturing, packaging, and transportation
processes.
Why should I buy your LED
lighting?
Buying your LED lighting from us means knowing it’s fit for the
job and will work every time. Our affordable solutions don’t just
take the headache out of sourcing LED lighting, they also give
your work a beautiful finish and a unique, premium look and
feel.
What is your returns policy? We work hard to make sure you’re happy with our products.
If you have any questions about your purchase or need help
finding the right solution, we’re always happy to help out. If for
some reason you need to return a product, please let us know
within 30 days of your purchase. The product must be unused
and in its original packaging with proof or purchase enclosed.
In some cases, a 15% re-stocking fee may apply. We do not
accept returns on MTM product, although our after sales
support team will be happy to assist with any queries.
x.1
Download supporting documentation from the Titus Tekform website titustekform.com.au x.2
Sinkware &
Sinkware & Tapware
Appliances
11.2
Tekform Sinkware
Page
Information 11.4
Ergonomic Christchurch Range 11.6
Hand Fabricated Coloured (PVD) Range 11.8
Hand Fabricated Range 11.10
Composite Sink Range 11.11
Designer Butler Range 11.12
Everglades Range 11.13
Bowl & Drainer Range 11.15
Ergonomic Laundry Range 11.17
TradePro Sink & Tap 11.18
Sinkware Accessories 11.19
Sinkware and
Appliances
Product Guide
Tekform Tapware
Basin Mixers 11.23
Sink Mixers 11.24
High Rise Sink Mixers 11.24
11.3
DOMUS Ducting
Information 11.59
Wall Outlets 11.60
SuperTube 125 11.61
EasiPipe 11.63
System Parts and Flexible Hoses 11.65
Pipe and Hose Accessories 11.67
Modular Kits 11.69
Kitchen & Laundry Appliances
Information 11.28
Upright Cooker 11.29
Built-in Ovens 11.30
Compacts 11.34
Microwaves 11.37
Cooktops 11.38
Rangehoods 11.46
Dishwashers 11.54
Outdoor Appliances 11.56
Washing Machines 11.57
Clothes Dryers 11.58
11.4
Tekform Sinkware
About your Tekform Sinkware
Stainless Steel
Grade
Stainless steel is very hygienic and easy to clean,
making it ideal for food preparation.
The regular steel grade is 304. Many Tekform sinks are available in
the higher 316 marine grade steel.
Seamless Pressed
Method
The superior finish of sinkware drawn from one solid
plate takes skill and years of understanding the art of
stainless steel.
Mercer, the manufacturer of Tekform sinks by Titus delivers this for
you from their dedicated sinkware plant in Christchurch. Craftsmen
with many combined years of experience produce your sinkware
with care.
Radius This is the measurement of the bowl curves. Tight radius
bowls are squarer in shape, for a modern look. However
the larger radius bowls are easier to clean and maintain.
Sink Edge For TopMount installations, the lip around the bowl can
protect the high wear edge of your benchtop.
Size Smaller bowls conserve water and bench space and are
great for rinsing. Larger bowls will accommodate bigger
dishes and trays.
Depth Shallow bowls are perfect for food preparation and
as an effective drainer. They leave plenty of room for
underlying cabinetry and a great place to sit a dishrack.
Waste Location The waste is often located towards the back of the sink
to provide you with maximum storage space in the front
of your kitchen cabinet.
Hand Welded
Method (WI)
Also available in the range are entry level welded
products. Still with the style and functionality you are
looking for. Look for the 'Weld In' icon.
Edge Profile There are a variety of edge profiles available. Rolled
super-safe edges are robust and have no sharp edges,
the flat profile chamfered edges on the Tekform pressed
top-mount bowls are safe and unobtrusive with a tight
fit to the bench surface. Chamfered edges create an
easy to wipe with EzyWipe connection from the bench
to the bowl.
Look out for these icons
A quick and easy way for you to understand which sink is right for
your needs.
Note: UnderMount templates and CAD files are a guide
only, we strongly recommend test cut-outs and check
against actual bowls before installation.
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.5
Sinkware & Tapware
Tekform Sinkware
Supplier Information and Warranty
Manufacture &
Supply Partner
Titus Tekform's sinkware collection brings
to the Australian market a unique range of
products sourced and manufactured by our
partner Mercer, from their modern pressing
plant located in Christchurch, New Zealand.
Mercer brings major point of difference to the
Sinkware market in Australia through Tekform
by Titus, offering customers a variety of
sinkware options for residential and industrial
applications.
Mercer History The original Mercer Company was established
in 1884 by Mr James Mercer in Christchurch,
New Zealand. James Mercer laid the
foundations for the future with techniques in
Copper-smithing, Metalworking and founder’s
hammer and forging.
Today, with over 130 years in operation, the
modern facility has world standard deepdrawn tight radius pressing equipment, robotic
polishing and annealing; which allows Mercer’s
long-term skilled employees to craft a range of
uniformed deep-drawn stainless steel sinkware.
Mercer is now part of the Acero Group and
their full range of products can be viewed by
visiting
www.acero.co.nz
Product Disclaimer As the Mercer policy is one of continual
improvement, the manufacturers reserve the
right to vary specifications or delete models
from their range without prior notification.
Always use the physical product measurements
for cut-outs as the manufacturer’s template
is a guide only and may differ from the actual
product dimensions over time.
The manufacturers take no responsibility for
printing errors.
Product Warranty The Tekform by Titus range of stainless steel
sinkware products carry a 25 year warranty
for domestic application. Ceramic Butler
sinks carry a 5 year warranty for domestic
application. For information on commercial
application warranties, speak to your sales
representative.
Titus Tekform will rectify any genuine
manufacturing fault found with any Tekform
Sink by Titus during normal use. Please note
that this warranty does not cover scratching
or normal wear and tear, as these are not
manufacturing faults.
Installation Reminder Tekform sinkware can be installed in a variety
of styles including TopMount and UnderMount.
It is important to remember that all installations
are to be carried out by trained cabinet
makers familiar with the procedures involved.
Ceramic products in particular are to be fitted
by specialist cabinet makers with the skills in
fitting this type of sink design.
Need more technical
information?
Log onto titustekform.com.au/products/kitchen-appliances/sinkware for specific product
data sheets, care and maintenance information and product warranty details.
11.6
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
1/2 Bowl 260 315 150 9 604.8E16.022.000
• Reversible
• 300mm minimum cabinet size
3/4 Bowl 335 335 170 14 604.8E18.022.000
• Reversible
• 350mm minimum cabinet size
Medium Bowl 385 335 170 17 604.8E02.022.000
• Reversible
• 400mm minimum cabinet size
Main Bowl 440 385 170 22 604.8E08.022.000
• Reversible
• 450mm minimum cabinet size
Tekform Sinkware
Ergonomic Christchurch
(EC) Range • Made in New Zealand
• 90mm round basket waste included
• 0.9mm, 304 grade stainless steel
• 15mm low profile EzyWipe flange
• Classic finish
• 50mm corner radius
• 25 year warranty
Accessories for EC Sinkware > See page 11.19
260mm
150mm
deep
285
mm
315
mm
230mm
335 mm
170mm
deep
305
mm
335
mm
305 mm
305
mm
170mm
deep
355 mm
385 mm
335
mm
440 mm
170mm
deep
355
mm
385
mm
410 mm
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.7
Sinkware & Tapware
Tekform Sinkware
Ergonomic Christchurch
(EC) Range
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Maxi Bowl 540 385 180 28 604.8E20.022.000
• Reversible
• 550mm minimum cabinet size
Main Bowl & Medium Bowl 775 385 170 22/17 604.8E22.022.000
• Reversible
• 800mm minimum cabinet size
Double Main Bowls 770 440 170 22/22 604.8E12.022.000
• 800mm minimum cabinet size
Main Bowl & 1/2 Bowl RH Small Bowl 685 440 170 22/8 604.8E21.022.100
LH Small Bowl 685 440 170 8/22 604.8E21.022.200
• 750mm minimum cabinet size
540 mm
180mm
deep
355
mm
385
mm
510 mm
170mm
deep
385
mm
410
mm
305
mm
355
mm
775mm
440
mm
170mm
deep
770mm
355
mm
410
mm
355
mm
440
mm
170mm
deep
685mm
355
mm
410
mm
270
mm
11.8
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Gun Metal 450 450 200 32 604.8I40.022.005
550 450 200 40 604.8I42.022.005
• Matching grid included
• Colour-matched taps available > see page 11.25
Brass 450 450 200 32 604.8I40.022.006
550 450 200 40 604.8I42.022.006
• Matching grid included
• Colour-matched taps available > see page 11.25
Copper 450 450 200 32 604.8I40.022.007
550 450 200 40 604.8I42.022.007
• Matching grid included
• Colour-matched taps available > see page 11.25
Tekform Sinkware
Hand Fabricated Coloured
(PVD) Range
200mm
deep
400
mm
450
mm
400
mm
450
mm
200mm
deep
400
mm
450
mm
400
mm
450
mm
200mm
deep
500
mm
450
mm
400
mm
550
mm
• Coloured using superior liquid-free Physical Vapour
Deposition (PVD)
• 90mm colour-matched round basket waste included
• 1.2mm, 304 grade stainless steel
• 25mm flat flange
• Main bowl overflow
• 10mm corner radius
• 25 year warranty
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.9
Sinkware & Tapware
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Black 450 450 200 32 604.8I40.022.006
550 450 200 40 604.8I42.022.006
• Matching grid included
• Colour-matched taps available > see page 11.25
Main Bowl & 1/2 Bowl Gun Metal RH Small
Bowl 675 450 200 32/16 604.8I52.022.205
Gun Metal LH Small
Bowl 675 450 200 16/32 604.8I52.022.105
Brass RH Small Bowl 675 450 200 32/16 604.8I52.022.206
Brass LH Small Bowl 675 450 200 16/32 604.8I52.022.106
Copper RH Small Bowl 675 450 200 32/16 604.8I52.022.207
Copper LH Small Bowl 675 450 200 16/32 604.8I52.022.107
Matt Black RH Small
Bowl 675 450 200 32/16 604.8I52.022.208
Matt Black LH Small
Bowl 675 450 200 16/32 604.8I52.022.108
• Matching grid included
• Colour-matched taps available > see page 11.25
Tekform Sinkware
Hand Fabricated Coloured
(PVD) Range
200mm
deep
400
mm
450
mm
400
mm
450
mm
11.10
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Main Bowl 440 440 200 30 604.8I08.022.000
• 450mm minimum cabinet size
Maxi Bowl 540 440 200 38 604.8I20.022.000
• 550mm minimum cabinet size
Medium Bowl & Main Bowl 810 440 200 25/30 604.8I22.022.000
• 850mm minimum cabinet size
Medium Bowl & 1/2 Bowl 670 440 200 30/11 604.8I33.022.000
• 700mm minimum cabinet size
Tekform Sinkware
Hand Fabricated (HF)
Range • 90mm round basket waste
• 1.2mm, 304 grade stainless steel
• 25mm flat flange
• Satin finish
• Main bowl overflow
• 15mm corner radius
• 25 year warranty
Accessories for HF Sinkware > See page 11.19
440mm
400mm
400mm
440mm 200mm
(deep)
540mm
500mm
400mm
440mm 200mm
(deep)
340mm 400mm
400mm
810mm
440mm 200mm
(deep)
670mm
400mm 200mm
440mm 200mm
(deep)
400mm
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.11
Sinkware & Tapware
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Large Bowl 570 500 200 40 604.8J40.022.002
• 550mm minimum cabinet size
Main Bowl & 1/2 Bowl 815 500 215 42/21 604.8J28.022.002
• 800mm minimum cabinet size
Main Bowl & Drainer 1000 510 200 40 604.8J32.022.002
• Reversible
• 600mm minimum cabinet size
Double Main Bowl 860 510 200 31/31 604.8J30.022.002
• 900mm minimum cabinet size
Tekform Sinkware
Composite Sink (CM)
Range • Made in Italy
• 90mm round basket waste with cover
• 80% granite composite material
• 35mm flat flange
• Seamless matt finish
• Main bowl overflow
• 10mm corner radius
• 25 year warranty
• Tap holes not included
500mm
400mm
200mm
500mm
570mm
500mm
430mm 215mm
460mm
815mm
260mm
190mm 360mm
765mm
510mm
448mm
200mm
365mm
860mm
365mm
811mm
65
510mm
448mm
200mm
477mm
1000mm
457mm
11.12
Tekform Sinkware
Designer Butler (DB)
Range • Hand crafted in the UK from natural ceramic
• 90mm round basket waste
• High glaze white finish
• Main bowl overflow
• 5 year warranty
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Ceramic Single Bowl 595 475 225 42 604.8L02.102.000
• Ceramic bowls are not designed for a waste
disposal
• Product tapers inward by 12mm from top to
bottom on front and sides
• Ceramic products to be fitted by specialist
• All tap holes need to be cut by specialist.
Tap holes are not included
• 600mm minimum cabinet size
Ceramic Double Bowl 800 490 220 28/28 604.8L02.122.000
• Ceramic bowls are not designed for a waste
disposal
• Product tapers inward by 12mm from top to
bottom on front and sides
• Ceramic products to be fitted by specialist
• All tap holes need to be cut by specialist.
Tap holes are not included
• 800mm minimum cabinet size
475mm
225mm
(deep)
595mm
490mm
220mm
(deep)
800mm
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.13
Sinkware & Tapware
Tekform Sinkware
Everglades (EE)
Range • 90mm round basket waste included
• 0.8mm, 304 grade stainless steel
• Silk finish
• Laser edge
• 25mm corner radius
• Main bowl overflow
• 25 year warranty
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Main Bowl with Drainer 860 500 200 28 604.8O30.022.006
• Reversible
• 450mm minimum cabinet size
Main Bowl and 1/4 Bowl with Drainer RH Drain 1000 500 200/160 28/11 604.8O31.022.206
LH Drain 1000 500 160/200 11/28 604.8O31.022.106
• 650mm minimum cabinet size
11.14
Tekform Sinkware
Everglades (EE)
Range • 90mm round basket waste included
• 0.8mm, 304 grade stainless steel
• Silk finish
• Laser edge
• 25mm corner radius
• Main bowl overflow
• 25 year warranty
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Main Bowl and 3/4 Bowl with Drainer RH Drain 1160 500 200/180 28/18 604.8O34.022.206
LH Drain 1160 500 180/200 18/28 604.8O34.022.106
• 750mm minimum cabinet size
Double Main Bowl with Drainer 1200 500 200/200 28/28 604.8O36.022.006
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.15
Sinkware & Tapware
Tekform Sinkware
Bowl and Drainer (BD)
Range
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Double Bowls 1 Tap Hole 820 500 180 24/24 604.8K12.022.100
No Tap Hole 820 500 180 24/24 604.8K12.022.000
Main Bowl & 3/4 Bowl + Fan Drainer LH Drain 1 Tap Hole 1080 480 170/150 12/20 604.8K24.022.110
RH Drain 1 Tap Hole 1080 480 170/150 20/12 604.8K24.022.120
No Tap Hole 1080 480 170/150 20/12 604.8K24.022.000
Main Bowl & 1/2 Bowl + Fan Drainer No Tap Hole 990 485 170/150 20/8 604.8K28.022.000
820mm
355mm 355mm
500mm
406mm
180mm deep bowls
1080mm
330mm 278mm
480mm
380mm
278mm
170mm deep main bowl
150mm deep small bowl
• 90mm round basket waste included
• 0.8mm, 304 grade stainless steel
• Satin finish
• Laser edge
• Main bowl overflow
• 25 year warranty
11.16
Tekform Sinkware
Bowl and Drainer (BD)
Range
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Double Bowls + Fan Drainer LH Drain 1 Tap Hole 1180 480 170 20/20 604.8K36.022.110
RH Drain 1 Tap Hole 1180 480 170 20/20 604.8K36.022.120
No Tap Hole 1180 480 170 20/20 604.8K36.022.000
Double Bowls + Double Fan Drainers 1 Tap Hole 1380 480 170 20/20 604.8K46.022.000
No Tap Hole 1380 480 170 20/20 604.8K46.022.100
Main Bowl + Fan Drainer LH Drain 1 Tap Hole 780 480 170 20 604.8K08.022.110
RH Drain 1 Tap Hole 780 480 170 20 604.8K08.022.120
No Tap Hole 780 480 170 20 604.8K08.022.000
• 90mm round basket waste included
• 0.8mm, 304 grade stainless steel
• Satin finish
• Laser edge
• Main bowl overflow
• 25 year warranty
1380mm
330mm 330mm
380mm
480mm
170mm deep main bowls
1180mm
330mm 330mm
480mm
380mm
170mm deep bowls
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.17
Sinkware & Tapware
Tekform Sinkware
Ergonomic Laundry (EL)
Range
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
Large Bowl 0.8mm SS Bowl Only 560 460 230 45 604.8N40.022.000
Laundry Tub 30L No Tap Hole 390 500 200 30 604.8N43.022.000
Laundry Tub 45L No Tap Hole 600 500 230 45 604.8N44.022.000
Premium Entry Level Laundry Tub 630 470 220 45 604.8V44.022.001
560mm
230mm
deep
420
mm
460
mm
520mm
600mm
230mm
deep
420
mm
500
mm
520mm
390mm
200mm
deep
420
mm
500
mm
310mm
• Made in New Zealand
• 90mm round basket waste included
• 304 grade stainless steel
11.18
Tekform Sinkware
TradePro Sink & Tap • Seamless pressed bowls
• 304 grade stainless steel
• Sidewall by-pass kit
• Large bowl kitchen, galley and alfresco applications
Technical details
and dimensions
Length (mm)
Width (mm)
Depth (mm)
Capacity (L)
Item number
TradePro Main Bowl & 3/4 Bowl with Drainer and Mixer Tap 1080 480 170/150 20/11 604.8V52.022.001
• Sink and tap package
• For sink only > 604.8V52.022.000
1080mm
330mm 278mm
480mm
380mm
278mm
170mm deep main bowl
150mm deep small bowl
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.19
Sinkware & Tapware
DriSeal (DS) Program
• To use with all sinkware without tap landings
• Protects benchtops from water damage
• Creates a barrier to spills and leaks
• Decorative and functional design
DriSeal product images and ordering information can be found under Sink Accessories (SA)
> See page 11.22
Tekform Sinkware Accessories
Information
Customise Using foodboards, colanders and other
fitted accessories with your sinkware
makes food preparation simple.
See pages 11.20-11.22
to mix and match accessories
with your preferred sink.
Drainer Trays Drainer trays give you the option of placing
the drainer where it is most convenient.
Create bench space and drain wet dishes
effortlessly with a drainer tray positioned
left, right or fitted over your sink.
Food Preparation Food boards are perfect for creating more
bench space in smaller kitchens. Fit the
cutting board over the sink to create a
food preparation space.
Washing up Tekform Sink accessories offer flexibility to
your space. Add dishracks suited to your
preferred sinks and cleaning up is easy.
11.20
Item number
Food Board 604.8X54.140.000
• To suit PVD and HF
EC Food Board 604.8X62.018.000
• To suit EC
Bowl and Drainer Food Board 604.8X54.270.000
• To suit BD Main
Bowls
Tekform Sinkware
Sink Accessories (SA)
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.21
Sinkware & Tapware
Item number
Drainer Mat Stainless Steel 604.8X63.020.000
Gun Metal 604.8X63.020.005
Brass 604.8X63.020.006
Copper 604.8X63.020.007
Matt Black 604.8X63.020.008
Colander Insert Stainless Steel 604.8X58.020.000
Gun Metal 604.8X58.020.005
Brass 604.8X58.020.006
Copper 604.8X58.020.007
Matt Black 604.8X58.020.008
Hand Fabricated Drainer Tray For HF & PVD Bowls 604.8X60.130.000
For EC Bowls 604.8X60.032.000
For BD Bowls 604.8X60.034.000
Tekform Sinkware
Sink Accessories (SA)
Tekform Sinkware Accessories by Titus offer you:
• Convenience
• Organisation
• Flexibility
• Safety
604.8X60.130.000 604.8X60.032.000 604.8X60.034.000
11.22
Item number
Dish Rack S/S (EC & BD Main Bowls) 604.8X62.024.000
Dish Rack S/S (DC & HF Main Bowls) 604.8X62.016.000
DriSeal Round 604.8X64.090.001
DriSeal Square 604.8X64.090.002
Tekform Sinkware
Sink Accessories (SA)
Tekform Sinkware Accessories by Titus offer you:
• Convenience
• Organisation
• Flexibility
• Safety
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.23
Sinkware & Tapware
• 40mm Ceramic Cartridge
• 5 star WELS water rating
Tekform Tapware
Basin Mixers
Technical details and dimensions Finish Item number
Square Basin Mixer Chrome 604.8F08.001
Made of brass with chrome
• Solid handle
Basin Mixer Chrome 604.8F08.005
Made of brass with chrome
• Solid handle
11.24
• 40mm Ceramic Cartridge
• 5 star WELS water rating
Tekform Tapware
Sink Mixers
Technical details and dimensions Finish Item number
Single Lever Single Mixer Chrome 604.8F07.050
Made of brass with chrome
• 5 star WELS rating
Brushed Nickel Pull-out Single Lever Sink Mixer BN 604.8F07.025.006
Made of brass with chrome
• 5 star WELS rating
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.25
Sinkware & Tapware
• 35mm Ceramic Cartridge
• 5 star WELS water rating
Tekform Tapware
High Rise Sink Mixers
Technical details and dimensions Finish Item number
PVD High Rise Goose Neck Sink Mixer Gun Metal 604.8F07.015.005
Brass 604.8F07.015.006
Copper 604.8F07.015.007
Black 604.8F07.015.008
• 5 star WELS rating
Stainless Steel High Rise Goose Neck Sink Mixer S/Steel 604.8F07.015.001
• 5 star WELS rating
11.26
• 35mm Ceramic Cartridge
Tekform Tapware
High Rise Sink Mixers
Technical details and dimensions Finish Item number
Black High Rise Goose Neck Sink Mixer Matt Black 604.8F07.150.002
• 5 star WELS rating
Kara Chrome Square Sink Mixer Chrome 604.8F07.031
• 4 star WELS rating
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.27
Appliances
Kitchen Appliances
& Ducting
Kitchen &
Laundry
Appliances
11.28
The Brands
Teka Appliance Collection -
Global Solutions for Australian
Homes
Founded in 1924, Teka has become the
benchmark in European manufacture
of built-in home appliances, particularly
cooking. Today, Teka boasts more
than 30 factories spead across three
continents and markets to over 110
countries.
Titus Tekform's partner, Residentia, has
worked with Teka's product engineers to
design a product range across the Kitchen
and Laundry categories specifically to
suit the Australian and New Zealand
consumer.
InAlto Appliance Collection -
A Higher Level of Cooking
The InAlto brand was created by
Residentia through a singular desire:
to establish a premium-level range
of kitchen appliances able to deliver
a superior cooking experience to
Australian consumers.
The Titus Tekform offer was designed
to eliminate shortcomings with today’s
major brands whilst drawing on European
design trends.
Quality Assurance for your
Inalto and Teka Appliances
from Titus Tekform
The Residentia team are committed to
ensuring all products meet and exceed
all required standards and approvals
and have engaged the services of
independent experts both locally and
internationally to ensure this is the case.
All manufacturing partners are regularly
audited and pre-shipment inspections
will also take place. Residentia employs
the services of QA inspectors to perform
inspections on products throughout the
manufacturing process.
Bonus Warranty Each new InAlto or Teka appliance is
now available with a bonus warranty
when registered online. A 2 year
manufacturer's warranty for Inalto
appliances and a 3 year manufacturer's
warranty for Teka appliances is
automatically applied as standard, from
the date of purchase.
Simply register online within 90 days of
purchase and Residentia will extend the
manufacturer's warranty by 12 months for
InAlto products and 24 months for Teka
products, free of charge.
2 + 1
3 + 2
Claims and Returns All InAlto appliances purchased from
Titus Tekform carry a 24 month supplier
warranty.
In the rare event that you experience a
product failure or fault, you can contact
the Residentia support team on:
1311 HELP (4357)
Stock of all required spare parts to suit
the InAlto appliances is available to ensure
the service technician can fix any issue
promptly.
For more information on the Titus Tekform
Quality and Claims policies, visit
www.titustekform.com.au/warrantyand-services
Appliances
from Titus Tekform
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.29
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
900mm Freestanding Oven with Gas Cooktop 896 595 856 604.8A41.102.001
• 5 Italian made Saba burners inclusing wok burner
• 9 cooking functions with twin fan-force oven
• 109L useable oven capacity
900mm Freestanding Dual Fuel with Brass Burners 895 597 858 604.8A41.102.002
• 5 Italian made Saba burners inclusing wok burner
• 10 cooking functions with twin fan-force oven
• 115L useable oven capacity
Kitchen Appliances
Upright Cookers • Premium quality stand-alone cooktop and oven
• Superb balance of technology, performance and safety
• Cavity cooling system
• Triple glazed removable door
• Self-cleaning catalytic liners
• 2 + 1 year InAlto warranty
11.30
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Stainless Steel Maestro Pyrolytic Oven 595 562 595 604.8A61.404.100
• 12 functions including fan-forced
• 4 inch TFT display
• Digital thermostat with temperature regulation 30-270°C
• Pyrolytic and Hydroclean cleaning system
• Soft open and close door
• Ring illuminated control knobs
• Touch control programmable timer
• Quad glazed door
• Easy to remove door glass system
• European energy class A+
600mm Stainless Steel Maestro Oven 595 562 595 604.8A61.404.102
• 12 functions including fan-forced
• 4 inch TFT display
• Digital thermostat with temperature regulation 30-270°C
• Hydroclean cleaning system
• Soft open and close door
• Ring illuminated control knobs
• Touch control programmable timer
• Quad glazed door
• Easy to remove door glass system
• European energy class A+
Kitchen Appliances
Built-in Ovens • Superb balance of technology, performance and safety
• Full featured electric oven
• 80L gross oven capacity
• Personal assistant with 20 recipes selects optimal cook
settings by food type and size
• 3 + 2 year Teka warranty
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.31
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Stainless Steel 6 Function Hydroclean Oven 595 562 595 604.8A61.404.001
• Hydroclean cleaning system
• 6 cooking functions
• Triple glazed removable door
• European energy class A
600mm Stainless Steel 9 Function Hydroclean Oven 595 562 595 604.8A61.404.002
• Hydroclean cleaning system
• 9 cooking functions
• Triple glazed removable door
• European energy class A+
600mm Stainless Steel Multifunction Pyrolytic Oven 595 532 595 604.8A61.404.003
• Hydroclean cleaning system
• Pyrolytic cleaning system
• 8 cooking functions
• Quad glazed removable door
• European energy class A+
Kitchen Appliances
Built-in Ovens • Superb balance of technology, performance and safety
• Electric oven
• 80L gross oven capacity
• 3 + 2 year Teka warranty
11.32
Width (mm)
Depth (mm)
Height (mm)
Item number
900mm Stainless Steel Multifunction Hydroclean Oven 890 538+22 480 604.8A61.404.004
• Hydroclean cleaning system
• 91L gross oven capacity
• 9 cooking functions
• European energy class A+
• 3 + 2 year Teka warranty
600mm Stainless Steel Minute Timer Fan Forced Oven 595 575 595 604.8A41.404.001
• 5 cooking functions
• 85L gross capacity
• Cavity cooling system
• 120 minute minder timer
• 2 + 1 year InAlto warranty
600mm Stainless Steel Programmable Timer Fan Forced Oven 595 575 595 604.8A41.404.002
• 5 cooking functions
• 85L gross capacity
• Cavity cooling system
• Programmable clock/timer
• 2 + 1 year InAlto warranty
Kitchen Appliances
Built-in Ovens • Superb balance of technology, performance and safety
• Electric oven
• Triple glazed removable door
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.33
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Stainless Steel 9 Function Fan Forced Oven 595 575 595 604.8A41.404.003
• 9 cooking functions
• 85L gross capacity
• Programmable clock/timer
600mm Multifunction Double Oven 595 569 874 604.8A41.404.004
• 12 cooking functions
• 102L gross capacity (42L + 62L)
• Programmable LED timer
900mm Stainless Steel Fan Forced Oven 895 547 475 604.8A41.404.005
• 9 cooking functions
• 100L gross capacity
• Programmable LED timer
Kitchen Appliances
Built-in Ovens • Superb balance of technology, performance and safety
• Electric oven
• Triple glazed removable door
• Cavity cooling system
• 2 + 1 year InAlto warranty
11.34
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Compact Pyrolytic Oven with Hydroclean 595 542 455 604.8A62.004.001
• Pyrolytic & Hydroclean cleaning system
• 45L gross oven capacity
• Quad glazed removable door
• 12 cooking functions
• Personal assistant with 20 recipes
• Digital thermostat with temperature regulation 30-
270°C
• European energy class A+
600mm Stainless Steel Combination Steam Oven 595 542 455 604.8A62.006.001
• Hydroclean PRO cleaning system
• 16 cooking functions
• 45L gross capacity
• Triple glazed soft close door
• Sterilisation and regeneration function
• Personal cooking assistant with 20 recipes
• Slow-cook function
600mm Combination Microwave & Multifunction Oven 595 455 542 604.8A62.008.001
• Hydroclean PRO cleaning system
• 16 cooking functions
• 41L gross capacity
• Triple glazed soft close door
• 2500W maxi grill
• Personal cooking assistant with 20 recipes
• Slow-cook function
Kitchen Appliances
Compact Appliances • Superb balance of technology, performance and
safety
• Compact luxury kitchen appliances
• 3 + 2 year Teka warranty
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.35
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
Built-in Compact Grinder Coffee Machine 595 455 413 604.8A62.010.001
• Pump power: 15 bar
• 1.8L water tank capacity
• 3x functions: coffee, steam, hot water
• Integrated coffee grinder
• Grinding coarseness regulator: 13 positions
Built-in Compact Pods Coffee Machine 595 455 413 604.8A62.010.002
• Pump power: 15 bar
• 1.8L water tank capacity
• 3x functions: coffee, steam, hot water
• Integrated pod system
Kitchen Appliances
Compact Appliances • Superb balance of technology, performance and safety
• Compact luxury kitchen appliances
• 2 cup capacity
• 30 automatic programs
• 3 + 2 year Teka warranty
11.36
Width (mm)
Depth (mm)
Height (mm)
Item number
Compact Vacuum Sealer 595 542 455 604.8A62.012.001
• Designed to pair with Teka compacts
• Vacuum sealing machine
• Kitchen scale with protective cover
• Roll holder for aluminium film
• Roll holder for transparent film
• Self-closing and soft close
Warming Drawer 595 557 140 604.8A69.001.001
• Designed to pair with Teka compacts
• Mark-free stainless steel finish
• Includes anti-slip matt
• 30-70°C temperature range
• Ideal for heating plates, cups and cutlery
Kitchen Appliances
Compact Appliances • Superb balance of technology, performance and safety
• Compact luxury kitchen appliances
• 3 + 2 year Teka warranty
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.37
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
25L Built-in Convection Microwave 594 465 388 604.8A42.008.001
• 25L capacity
• Frameless black glass built-in design
• Defrost by weight and time
• Touch controls
• 900W microwave power
• 1100W grill power
• 2400W convection power
• 2 + 1 year InAlto warranty
Kitchen Appliances
Microwaves • Superb balance of technology, performance and safety
• Child safety lock
• Stainless steel cavity
11.38
Installation mode
Width (mm)
Depth (mm)
Height (mm)
Item number
Nikola Tesla Aspirating Cooktop & Integrated Rangehood Ducted 830 515 210 604.8A83.020.001
Re-circulated 830 515 210 604.8A83.020.002
• 9 power levels
• Touch control
• Power booster
• Residual heat indicator
• Safe activation and child lock
• Safety shut down
• Cool induction surface
Kitchen Appliances
Aspirating Cooktop • Fully integrated air suction system
• Capture fumes and odours in record time
• High performance ceramic filters
• Easy to clean
• Intuitive controls
• Available as either recycled (inner motor) or duct out
(external motor)
• 5 year Elica warranty
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Extension Induction Cooktop 560 490 50 604.8A63.016.001
• Bevelled edges
• 3 cooking zones including 1 extension zone
• Slide touch controls
• Independent timer functions for each zone
• Low temperature function
800mm 4 Zone Induction Cooktop 800 510 50 604.8A63.016.002
• Bevelled edges
• 4 cooking zones
• Slide touch controls
• Independent timer functions for each zone
• Pan detection system
Kitchen Appliances
Induction Cooktops • Superb balance of technology, performance and safety
• European made Eurokera glass
• Residual heat indicators
• Child lock
• Stop & Go function
• Powerplus boost function
• 3 + 2 year Teka warranty
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.39
Kitchen Appliances
11.40
Width (mm)
Depth (mm)
Height (mm)
Item number
900mm 4 Zone Induction Cooktop 750 520 46 604.8A63.016.003
• European made Eurokera glass
• Bevelled edges
• 4 cooking zones including flexi-zone
• Slide touch controls
• Independent timer functions for each zone
• Pan detection system
• Stop & Go function
• Powerplus boost function
• Teka Synchro function
• 3 + 2 year Teka warranty
600mm 4 Zone Induction Cooktop 590 520 56 604.8A43.016.001
• Durable Schott Ceran glass
• 4 cooking zones with boosters
• Front touch control operation
• Frameless with bevelled edges
• High speed ribbon elements
• 9 power levels
• 99 min. zone timer
• 2 + 1 year InAlto warranty
Kitchen Appliances
Induction Cooktops • Superb balance of technology, performance and safety
• Residual heat indicators
• Child lock
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.41
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Stainless Steel Gas Cooktop 600 510 45 604.8A63.014.001
• 4 burners including a wok burner
• Easy to clean single press stainless steel hob
900mm Stainless Steel Gas Cooktop 860 510 45 604.8A63.014.002
• 5 burners including a wok burner
• Easy to clean single press stainless steel hob
600mm Ceramic Glass Gas Cooktop 610 512 50 604.8A63.014.003
• Gas on glass cooktop
• 4 burners including a triple ring wok burner
• Easy to clean toughened ceramic glass
Kitchen Appliances
Gas Cooktops • Superb balance of technology, performance and safety
• Heavy duty cast iron trivets
• Automatic under-knob ignition
• Flame failure
• 3 + 2 year Teka warranty
11.42
Width (mm)
Depth (mm)
Height (mm)
Item number
700mm Ceramic Glass Gas Cooktop 710 512 50 604.8A63.014.004
• Gas on glass cooktop
• Heavy duty cast iron trivets
• 4 burners including a triple ring wok burner
• Easy to clean toughened ceramic glass
• 3 + 2 year Teka warranty
900mm Ceramic Glass Gas Cooktop 860 510 45 604.8A63.014.005
• Gas on glass cooktop
• Heavy duty cast iron trivets
• 4 burners including a triple ring wok burner
• Easy to clean toughened ceramic glass
• 3 + 2 year Teka warranty
600mm 4 Burner Gas Cooktop 600 510 40 604.8A43.014.001
• 4 Italian made Defendi burners
• Heavy duty 304 grade stainless steel
• Sturdy enamel trivets
• Easy to clean single press stainless steel hob
• 2 + 1 year InAlto warranty
Kitchen Appliances
Gas Cooktops • Superb balance of technology, performance and safety
• Automatic under-knob ignition
• Flame failure
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.43
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm 4 Burner Side Control Gas Cooktop 600 510 40 604.8A43.014.002
• 4 Italian made Defendi burners
• Easy to clean single press stainless steel hob
700mm 5 Burner Gas Cooktop 700 510 40 604.8A43.014.003
• 5 Italian made Defendi burners
• Easy to clean single press stainless steel hob
900mm 5 Burner Gas Cooktop 860 510 40 604.8A43.014.004
• 5 Italian made Defendi burners
• Easy to clean single press stainless steel hob
Kitchen Appliances
Gas Cooktops • Superb balance of technology, performance and safety
• Heavy duty 304 grade stainless steel
• Electronic under-knob ignition
• Flame failure
• Cast iron trivets
• 2 + 1 year InAlto warranty
11.44
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm 4 Zone Knob Control Electric Cooktop 590 520 46 604.8A43.018.001
• Durable Eurokera glass
• Side knob control operation
• Frameless
• 6 power levels
600mm 4 Zone Touch Control Electric Cooktop 590 520 46 604.8A43.018.002
• Durable Schott Ceran glass
• Front touch control operation
• Frameless with bevelled edges
• High speed ribbon elements
• Child lock
• 9 power levels
• 99 min. zone timer
Kitchen Appliances
Electric Cooktops • Superb balance of technology, performance and safety
• 4 cooking zones
• Residual heat indicators
• Auto safety switch off
• 2 + 1 year InAlto warranty
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.45
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
750mm 4 Zone Touch Control Electric Cooktop 750 520 46 604.8A43.018.003
• Durable Schott Ceran glass
• 4 cooking zones and 2 extended zones
• Front touch control operation
• Frameless with bevelled edges
• High speed ribbon elements
• Child lock
• 9 power levels
• 99 min. zone timer
900mm 5 Zone Slide Control Electric Cooktop 900 520 56 604.8A43.018.004
• Durable Schott Ceran glass
• 3 extended zones
• Front touch slide controls
• Frameless with bevelled edges
• High speed ribbon elements
• Child lock
• 9 power levels
• 99 min. zone timer
Kitchen Appliances
Electric Cooktops • Superb balance of technology, performance and safety
• Residual heat indicators
• Auto safety switch off
• 2 + 1 year InAlto warranty
11.46
Installation mode
Width (mm)
Depth (mm)
Height (mm)
Item number
Adagio Stainless Steel Downdraft Rangehood Ducted 875 120 300 604.8A83.030.003
Re-circulated 875 120 300 604.8A83.030.004
• Motorised pop-up design
• Touch control with optional remote control
• 57 db(A) noise level
• Aluminium grease filter
• 800m3
/h extraction capacity
• Available as either recycled (inner motor) or duct out
(external motor)
Pandora Stainless Steel Downdraft Rangehood Ducted 758 120 140 604.8A83.030.001
Re-circulated 758 120 140 604.8A83.030.002
• Sleek integrated pop-up design
• Touch control
• 57 db(A) noise level
• Aluminium and charcoal grease filter
• 800m3
/h extraction capacity
• Available as either recycled (inner motor) or duct out
(external motor)
Meteorite Canopy Rangehood Ducted 898 435 704 604.8A83.020.100
• Concealed filters
• Touch control
• 59 db(A) noise level
• Aluminium grease filter
• 880m3
/h extraction capacity
Kitchen Appliances
Elica Rangehoods • Ergonomic built-in configuration
• Capture fumes and odours in record time
• 3 speeds plus power booster
• 5 year Elica warranty
Width (mm)
Depth (mm)
Height (mm)
Item number
520mm Undermount Rangehood 520 296 282 604.8A44.026.001
900mm Undermount Rangehood 900 296 282 604.8A44.026.003
Kitchen Appliances
Undermount Rangehoods • Superb balance of technology, performance and safety
• Dishwasher safe aluminium grease filters
• LED lighting
• 750m3
/hr extraction
• 2 + 1 year InAlto warranty
11.48
Width (mm)
Depth (mm)
Height (mm)
Item number
900mm Teka Canopy Rangehood 900 480 625-955 604.8A64.020.001
• Perimeter extraction
• Inner metallic grease filters
• 4x LED lamps
• Double turbine motor
• 3 speeds + intensive mode
• 3 + 2 year Teka warranty
900mm Box Canopy Touch Rangehood 900 500 560 604.8A44.020.005
• 1000m3
/hr extraction
• Stainless steel baffle filters
• 3 speeds
• Black glass fascia with touch controls
• 2 + 1 year InAlto warranty
900mm Island Canopy Rangehood 900 500 560 604.8A44.020.006
• Island rangehood design
• 1000m3
/hr perimeter extraction
• Stainless steel baffle filters
• 4 speeds including turbo
• Black glass fascia with touch controls
• 2 + 1 year InAlto warranty
Kitchen Appliances
Canopy Rangehoods • Superb balance of technology, performance and safety
• LED lighting
• Digital touch control panel
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.49
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
900mm Box Canopy Rangehood 900 500 548-1028 604.8A44.020.004
• 750m3
/hr extraction
• 2x LED lamps
• 3 speeds
• Push button controls
600mm Canopy Rangehood 600 500 638-1018 604.8A44.020.001
• 1000m3
/hr extraction
• 4 speeds including turbo
900mm Canopy Rangehood 900 500 638-1018 604.8A44.020.003
• 1000m3
/hr extraction
• 4 speeds including turbo
Kitchen Appliances
Canopy Rangehoods • Superb balance of technology, performance and safety
• LED lighting
• Stainless steel baffle filters
• Digital touch control panel
• 2 + 1 year InAlto warranty
11.50
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Curved Glass Canopy Rangehood 600 500 534-1014 604.8A44.020.002
900mm Curved Glass Canopy Rangehood 900 500 570-1050 604.8A44.020.007
900mm Flat Glass Canopy Rangehood 900 500 554-1034 604.8A44.020.008
Kitchen Appliances
Canopy Rangehoods • Superb balance of technology, performance and safety
• 1000m3
/hr extraction
• LED lighting
• Digital touch control panel
• 3 speeds
• Black glass fascia
• 2 + 1 year InAlto warranty
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.51
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Integrated Box Canopy Rangehood 565 285 352 604.8A44.020.009
900mm Integrated Box Canopy Rangehood 865 285 352 604.8A44.020.010
Kitchen Appliances
Integrated Rangehoods • Superb balance of technology, performance and safety
• Dishwasher safe aluminium grease filters
• LED lighting
• 1000m3
/hr extraction
• 2 + 1 year InAlto warranty
11.52
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Slide-out Stainless Steel Rangehood 599 278 200 604.8A44.024.001
900mm Slide-out Stainless Steel Rangehood 900 278 176 604.8A44.024.002
Kitchen Appliances
Slide-out Rangehoods • Superb balance of technology, performance and safety
• Dishwasher safe aluminium grease filters
• LED lighting
• 440m3
/hr extraction
• Ducted or recirculating installation options
• 2 speed settings
• 2 + 1 year InAlto warranty
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.53
Kitchen Appliances
Item number
Rangehood Flu Extensions, 1200mm 604.8A44.028.001
• For use with > canopy rangehoods
604.8A44.020.001 & 604.8A44.020.002
604.8A44.028.002
• For use with > canopy rangehood
604.8A44.020.004 & 604.8A44.020.005
604.8A44.028.003
Made of stainless steel
• For use with > canopy rangehood
604.8A44.020.002 & 604.8A44.020.007
Kitchen Appliances
Rangehood Accessories • Ensure your exhaust is ducted properly with a flu
extension
• Use extension with canopy rangehoods
Item number
Rangehood Carbon Filter 604.8A44.028.004
Made of plastic and carbon mesh
• Designed to replace dirty carbon filters in your
rangehoods
11.54
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Teka Stainless Steel Multifunction Dishwasher 598 610 845 604.8A65.030.002
• 14 place settings
• Third cutlery drawer
• 7 wash programs
• 3.5 star energy rating
• 4.5 star WELS water rating
• Water leak, overflow and aquastop protection
• 3 + 2 year Teka warranty
600mm Inalto Stainless Steel Multifunction Dishwasher 598 610 845 604.8A45.030.003
• 14 place settings
• Third cutlery drawer
• 7 wash programs
• 3.5 star energy rating
• 4.5 star WELS water rating
• Water leak, overflow and aquastop protection
• 2 + 1 year InAlto warranty
600mm Inalto Stainless Steel Dishwasher 600 580 850 604.8A45.030.001
• 14 place settings
• Removable cutlery basket
• 4 wash programs
• 3 star energy rating
• 4.5 star WELS water rating
• Anti-leak and anti-flood devices
• 2 + 1 year InAlto warranty
Kitchen Appliances
Dishwashers • Superb balance of technology, performance and safety
• Delay start
• Height adjustable upper baskets
• Stainless steel micro filter
• Quiet operation
• Child lock
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.55
Kitchen Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
600mm Integrated Dishwasher 598 550 815-865 604.8A45.032.001
• 14 place settings
• Fully integrated installation
• Third cutlery drawer
• 6 wash programs
• 3 star energy rating
• 4 star WELS water rating
• Anti-leak, anti-flood and aquastop devices
• Easy to clean slimline control panel
• Door front not included
450mm Stainless Steel Multifunction Freestanding Dishwasher 448 600 845 604.8A45.030.002
• 10 place settings
• Third cutlery drawer
• 7 wash programs
• 3.5 star energy rating
• 3.5 star WELS water rating
• Anti-leak and anti-flood devices
600mm Single Dishwasher Drawer 595 570 415 604.8A45.030.080
• 7 place settings
• Removable cutlery basket
• 7 wash programs
• 3.5 star energy rating
• 4.5 star WELS water rating
• 2 + 1 year InAlto warranty
Kitchen Appliances
Dishwashers • Superb balance of technology, performance and safety
• Delay start
• Height adjustable upper baskets
• Stainless steel micro filter
• Child lock
• 2 + 1 year InAlto warranty
11.56
Burners
Width (mm)
Depth (mm)
Height (mm)
Item number
Outdoor Beverage Centre 555 500 840 604.8A53.060.001
• 118L/178 can capacity
• 0°-10° temperature range
• Tropical rated up to 43°C
• Seamless stainless steel framed glass door
• Triple glazed and heated glass
• Electronic controls
• Internal LED strip lighting
• Weather resistant IPX4 rated
Outdoor Dual Motor Barbeque Rangehood 1200 700 1279 604.8A44.060.001
• Sturdy push button controls
• 6 rotatable LED lights
• 8 dishwasher safe baffle filters
• 3 speed settings
• Powerful 2000m3
/hr air flow
Built-in Barbeque Grill 4 Main Burners 945 523 850 604.8A55.060.001
6 Main Burners 945 523 850 604.8A55.060.002
• Internal lighting
• LED illuminated control knobs
• Heavy duty flame diffusers
• Double-sided cast iron plate
• Stainless steel cooking grid
• Temperature gauge
• Grease tray
• Rotisserie
• Infrared rear burner
Outdoor Appliances
BBQ and Patio • Premium 304 grade stainless steel
• Suitable for outdoor use
• 2 + 1 year InAlto warranty
Capacity (kg)
Width (mm)
Depth (mm)
Height (mm)
Item number
Front Load Washing Machine 10 595 595 850 604.8A66.034.002
• Spin speed selector
• Pre-wash option
• Teka Speed Wash technology
• 'Add a garment' feature
• Water temperature control
• 3.5 star energy rating
Combination Front Load Washing Machine & Dryer 10/7 595 565 850 604.8A66.038.002
• 10kg washing capacity
• 7kg drying capacity
• Spin speed selector
• Pre-wash option
• Teka Speed Wash / Dry program
• 'Add a garment' feature
• Water temperature control
• Condenser dryer
• Condensation expelled through drain hose
• 3 star energy rating
Laundry Appliances
Front Load Washers • 16 programs
• Delay start
• LED display
• 15 minute Quick Wash
• 4 star WELS water rating
• 3 + 2 year Teka warranty
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.57
Laundry Appliances
Width (mm)
Depth (mm)
Height (mm)
Item number
7kg Heat Pump Dryer 595 622 845 604.8A67.042.001
• 7kg clothes capacity
• 16 drying programs
• Autosensing drying
• Water tank display
• 375mm door opening
• LED display
• 198 min. full load standard dry time
• Transparent door
• Reverse tumbling action
• 6 star energy rating
Laundry Appliances
Clothes Dryers • Delay start
• Removable lint filter
• Auto power off
• Anti-crease mode
• Child lock
• 3 + 2 year Teka warranty
11.58
Ducting and Ventilation Product Range
Supertube 125 Supertube 125 is ideal for the ducting
of all rangehoods and powerful fans.
The airflow efficiency of Supertube 125
is maintained even on long ducting runs
and can be used with appliances of
high extraction rates.
EasiPipe EasiPipe round ducting is available
in two diameters: 125 and 150mm.
EasiPipe is a multi-application system
and is ideal for larger fans, rangehoods,
whole-house ventilation systems, stack
ventilation and air conditioning.
A round pipe system represents the
most efficient air flow conduit as less air
turbulence occurs.
Hoses & Accessories Flexible hoses provide a solution to
overcome situations where a rigid
component cannot be installed.
Manufactured in PVC self-extinguishing
material or polyester coated aluminium
for extra strength. Hoses are mainly for
use with tumble dryers or when there
is slow moving air. Round hoses are
available in sizes which are compatible
with both of our ranges in various
standard lengths.
A selection of accessories including
hose connectors, clips and tape provide
effective connections from flexible to rigid
ducting.
Wall Outlets DOMUS Ducting manufacture a
comprehensive range of wall outlets,
which are fully compatible with all
DOMUS system configurations. A
choice of three round spigots to fit
all EasiPipe sizes and rectangular
sockets for use with Supertube 125 are
available.
Wall outlets are manufactured in White UV
stabilised finishes. There are various types
of outlets for use in different situations.
Kits A range of standard boxed kits
is available providing a one-stop
solution to many popular installation
requirements.
However, should these kits not provide the
necessary products, special kits can be
designed to meet the exact specification
of the installation. All are packed in
purpose made cartons.
DOMUS Ducting
D215W H
5904 114-5 126-5 5611
126-5
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.59
Ducting
Outer Diameter (mm)
Outer Width x Height
(mm)
Item number
Wall Outlet with Gravity Flaps 125 200 x 200 604.8C06.590.000
150 200 x 200 604.8C06.690.000
Louvred Grill with Flyscreen 125 200 x 200 604.8C06.594.000
150 200 x 200 604.8C06.694.150
Brick Size Wall Outlet 201 x 57 604.8C06.501.000
• Brick sized wall outlet for use with 515
flat channel
Ducting
Wall Outlets
and Ventilators • UV stabilised plastic
• Protection from vermin and pests
11.60
Outer Diameter (mm)
Outer Width x Height
(mm)
Inner Width x Height
(mm)
Length (mm)
Item number
Flat Channel 204 x 60 1500 604.8C04.515.000
Flat Channel Clip 204 x 60 604.8C04.122.000
Flat Channel Connector Without damper 204 x 60 604.8C04.520.000
Elbow Bend 125 204 x 60 604.8C04.540.000
150 204 x 60 604.8C04.640.000
Vertical 90° Bend 204 x 60 604.8C04.560.000
• Creates efficient air flow
• Ideal for use with larger fans and rangehoods
Ducting
SuperTube 125
Flat Modular Ducting
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.61
Ducting
Ducting
SuperTube 125
Flat Modular Ducting
Outer Width x Height
(mm)
Outer Diameter (mm)
Inner Width x Height
(mm)
Item number
Adapter 125 204 x 60 604.8C04.570.000
Horizontal 90° Bend 204 x 60 604.8C04.550.000
Adapter with Offset Centres 262 x 118 205 x 61 604.8C06.115.000
• Rectangular Wall Plate 115 for use with brick size wall
outlet.
Adjustable Horizontal Bend 201 x 57 204 x 60 604.8C04.545.000
• Adjustable to and from 3.75° - 48.75°
11.62
Ducting
EasiPipe Round
Modular Ducting
Outer Diameter (mm)
Item number
Right Angle Bend 125 604.8C02.590.000
150 604.8C02.690.000
Straight Pipe Connector 125 604.8C02.593.000
150 604.8C02.693.000
• Available in both 125mm and 150mm diameter
• Very efficient with low turbulence
• Flexible usage with multiple applications
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.63
Ducting
Inner Diameter (mm)
Item number
Deklite® Flashing on Lead Deklite original 75-160 604.8C02.104.000
Deklite Tile on lead 75-160 604.8C02.114.000
Roof Cowl 125 604.8C02.505.000
150 604.8C02.507.000
Ducting
EasiPipe Round
Modular Ducting
11.64
Outer Diameter (mm)
Inner Diameter (mm)
Length (mm)
Item number
Pipe Fastener 125 604.8C02.596.150
150 604.8C02.696.150
EasiPipe 125 1200 604.8C02.530.000
150 1000 604.8C02.110.000
Ducting
System Parts and
Flexible Hose
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.65
Ducting
Inner Diameter (mm)
Length (mm)
Item number
Round PVC Coated Flexible Hose 127 1000 604.8C02.561.000
Round Nude Aluminium Hose 127 3000 604.8C02.905.000
150 3000 604.8C02.906.000
Ducting
System Parts and
Flexible Hose • For usage where rigid piping cannot be installed
• Suitable for slow air movement
• Ideal for clothes dryer installations
11.66
Ducting
Pipe and Hose Accessories
Outer Diameter (mm)
Inner Diameter (mm)
Item number
Circular Reducer and Adapter Adapter
Reducer
125 150 604.8C02.118.000
125 100 604.8C02.119.000
These products can be fitted
together to form either a 125-
100mm adapter or a 125-150mm
reducer.
Threaded Hose Connector with Socket 125 604.8C02.125.150
150 604.8C02.126.000
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.67
Ducting
Ducting
Pipe and Hose Accessories
Inner Diameter (mm)
Outer Width x Height
(mm)
Length (m)
Item number
Cable Tie 150 604.8C02.125.000
PVC Duct Sealing Tape 4.6 604.8C02.123.000
Round Wall Plate 125 154 x 154 604.8C02.145.000
150 205 x 205 604.8C02.146.000
11.68
Ducting
Modular Ducting Kits
D215W H
5904 114-5 126-5 5611
126-5
Item number
Supertube 125 Ducting Kit for 125mm Diameter 604.8C08.225.000
Supertube 125 Ducting Kit for 150mm Diameter 604.8C08.226.000
Flexible Hose Ducting Kit for Rear Ducting 125mm Diameter 604.8C08.215.000
• Complete solutions for popular installations
• Available as boxed kits
Download supporting documentation from the Titus Tekform website titustekform.com.au 11.69
Ducting
x.1
Download supporting documentation from the Titus Tekform website titustekform.com.au x.2
Doors, Panels
Doors & Panels
& Surfaces
12.2
Alifrost® Aluminium Doors
Product Overview and Application 12.23
Frame Options 12.24
Ali Handle 12.25
Insert Options 12.26
Extras and Accessories 12.28
Ordering Information 12.29
Belle Roller Doors
Product Overview and Specification 12.30
Ordering Information 12.31
Doors & Panels
Product Guide
Duraform® Vinyl Wrapped Doors
Series One - Contemporary Soft Corners 12.13
Series Two - Sharp Lines 12.14
Series Three - Square Corners and Defined Lines 12.15
Series Four - Classical Country 12.16
Series Five - Raised Designs 12.17
Options and Accessories 12.18
Ordering Information 12.22
Stefano Orlati Solid Surfaces
Page
OptiGlace PET Gloss Board 12.4
OptiMatt PET Matt Board 12.6
OptiGrain PET Woodgrain Board 12.8
Chiara 100% Acrylic Benchtops 12.10
Metalaminates and HMR Particle Board 12.12
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.3
Doors & Panels
Opti Board Product Overview
The Stefano Orlati OptiGlace, OptiMatt and OptiGrain board
range offers interior designers, specifiers and architects
a selection of PET gloss, matt and embossed woodgrain
doors and panels to beautifully finish any kitchen or room
design.
• Double-sided foil-finished decors
• Made from post-consumer used plastics for a more
environmentally-friendly product
• The Opti Board range is available in sheets or can be
prefabricated to your specifications
• Colour-matched edgebanding available > see page 6.3
12.4
Designed for vertical surface applications, OptiGlace
offers an easy-clean, superior high gloss finish for
drawers, door fronts and joinery.
OptiGlace
Gloss PET Board
OptiGlaz
Ice White
Ivory
Dune
Anthracite Metallic
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.5
Doors & Panels
OptiGlace
Gloss PET Board • Fingerprint-resistant surface
• Made from recyclable PET
• High scratch resistance
• Won’t chip, crack or delaminate
• Features double-sided decors
Colour
Length (mm)
Width (mm)
Thickness (mm)
Item number
OptiGlaz Acrylic Board Ice White 2440 1220 18.2 602.8O26.121.001
Ivory 2440 1220 18.2 602.8O26.121.003
Dune 2440 1220 18.2 602.8O26.121.031
Anthracite Metallic 2440 1220 18.2 602.8O26.121.009
For complementary edgebanding
see pages > 6.3 - 6.5
12.6
Designed for vertical surface applications, OptiMatt
offers an easy-clean, superior velvet-like finish for
cabinetry and furniture applications.
OptiMatt
PET Matt Board
OptiMatt
White
Cashmere
Stone Grey
Ivory
Dove Tale
Sage
Midnight
Premium Black
Anthracite
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.7
Doors & Panels
OptiMatt
PET Matt Board
• Fingerprint-resistant surface
• Made from recyclable PET
• High scratch resistance
• Won’t chip, crack or delaminate
• Features double-sided decors
Colour
Length (mm)
Width (mm)
Thickness (mm)
Item number
OptiMatt PET Board White 2440 1220 18.2 602.8O24.120.001
Premium Black 2440 1220 18.2 602.8O24.120.102
Ivory 2440 1220 18.2 602.8O24.120.004
Cashmere 2440 1220 18.2 602.8O24.120.007
Dove Tale 2440 1220 18.2 602.8O24.120.025
Midnight 2440 1220 18.2 602.8O24.120.008
Stone Grey 2440 1220 18.2 602.8O24.120.016
Sage 2440 1220 18.2 602.8O24.120.020
Anthracite 2440 1220 18.2 602.8O24.120.027
White 3040 1220 18.2 602.8O30.120.001
Premium Black 3040 1220 18.2 602.8O30.120.102
Ivory 3040 1220 18.2 602.8O30.120.004
For complementary edgebanding
see pages > 6.3 - 6.5
12.8
Designed for vertical surface applications, OptiGlace
offers an easy-clean, embossed woodgrain finish for
drawers, door fronts and joinery.
OptiGrain
Woodgrain PET Board
OptiGlaz
Riven White Oak
Riven Red Oak
Riven Grey Oak
Riven Walnut
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.9
Doors & Panels
OptiGrain
Woodgrain PET Board • Fingerprint-resistant surface
• Made from recyclable PET
• High scratch resistance
• Won’t chip, crack or delaminate
• Features double-sided decors
Colour
Length (mm)
Width (mm)
Thickness (mm)
Item number
OptiGlaz Acrylic Board Riven White Oak 2440 1220 18.2 602.8W24.120.027
Riven Grey Oak 2440 1220 18.2 602.8W24.120.028
Riven Red Oak 2440 1220 18.2 602.8W24.120.029
Riven Walnut 2440 1220 18.2 602.8W24.120.030
For complementary edgebanding
see pages > 6.3 - 6.5
12.10
The Chiara benchtop is easily fabricated to your
specifications and supremely low maintenance. All
11 finishes are factory machined and ready to finish
any kitchen.
Stefano Orlati Chiara
100% Acrylic Benchtops
Colour Options:
Amalfi Palmanova Manarola Lecce
Ravello Sorrento Atrani Portofino
Cefalu Positano
Custom Edge Profiles:
Pencil Round Arriss Waterfall
Domaso
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.11
Doors & Panels
Stefano Orlati Chiara
100% Acrylic Benchtops
• More versatile than granite or marble
• Strong, cool-touch material with inconspicuous
joins
• 12mm solid colour surface
• 10 year warranty
Colour
Length (mm)
Width (mm)
Thickness (mm)
Item number
Chiara Acrylic Benchtops Manarola 3660 760 12.3 602.8O27.360.001
Positano 3660 760 12.3 602.8O27.360.002
Sorrento 3660 760 12.3 602.8O27.360.003
Portofino 3660 760 12.3 602.8O27.360.004
Ravello 3660 760 12.3 602.8O27.360.005
Amalfi 3660 760 12.3 602.8O27.360.006
Atrani 3660 760 12.3 602.8O27.360.007
Cefalu 3660 760 12.3 602.8O27.360.008
Palmanova 3660 760 12.3 602.8O27.360.009
Lecce 3660 760 12.3 602.8O27.360.010
Domaso 3660 760 12.3 602.8O27.360.011
Manarola 602.8O28.050.001
Positano 602.8O28.050.002
Sorrento 602.8O28.050.003
Portofino 602.8O28.050.004
Ravello 602.8O28.050.005
Amalfi 602.8O28.050.006
Atrani 602.8O28.050.007
Cefalu 602.8O28.050.008
Palmanova 602.8O28.050.009
Lecce 602.8O28.050.010
Domaso 602.8O28.050.011
Colour matched adhesive for seamless joins
with the Chiara 100% Acrylic Benchtops
50ml Solid Surface Adhesive
12.12
Doors & Panels
Stefano Orlati Metalaminates
& HMR Particleboard
Product Overview
• A durable, non-staining, non-marking
material that is ideal for kickers & feature
panels
• Available in two colours: Brushed Aluminium
& Brushed Stainless Steel
• Premounted large sheets & smaller width
rips on HMR particleboard available for ease
of installation & use in moisture prone areas
such as kitchens & bathrooms
Product ordering information
Item number
Brushed Aluminium Metalaminate 3600x 1200 x 0.8mm 602.8M36.120.048
Brushed Stainless Metalaminate 3600x 1200 x 0.8mm 602.8M36.120.058
Brushed Aluminium HMR Particle Board Sheet 3600 x 1200 x 16mm 602.8M36.120.148
Brushed Aluminium HMR Particle Board Rip 3600 x 120 x 16mm 602.8M36.012.048
Brushed Aluminium HMR Particle Board Rip 3600 x 150 x 16mm 602.8M36.015.048
Doors & Panels
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.13
Doors & Panels
Doors & Panels
Duraform® Vinyl Wrapped
Doors
Series One
Contemporary soft, plain faced designer, which will enhance a modern kitchen.
Doors & Panels
Avoca
Gordon
Kiewa
Bass
Gordon 12
King
Buffalo
Jamieson
Omeo
12.14
Doors & Panels
Duraform® Vinyl Wrapped
Doors
Series Two
Soft round corners and sharp lines for simplicity and functionality in design.
Doors & Panels
Barwon Canning
Franklin
Daly
Hunter
Tambo
Fitzroy Hastings
Emu
Huon
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.15
Doors & Panels
Doors & Panels
Duraform® Vinyl Wrapped
Doors
Series Three
Square corner routes in most styles and straight defined lines.
Doors & Panels
Bemm Derwent
Murray
Catherine
Goulburn
Swan
Darling
Tarwin Tusmore
Lachlan Esk Jardine
12.16
Doors & Panels
Duraform® Vinyl Wrapped
Doors
Series Four
Classical country styling with contemporary modern lines. V-grooved panels to flat panelled designs.
Acheron
Howqua
Dargo
LaTrobe
Hay
Thompson
Edward
Loddon
Thompson 3 Thompson 5 Thompson SL Thompson 3SL Thompson 5SL
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.17
Doors & Panels
Doors & Panels
Duraform® Vinyl Wrapped
Doors
Series Five
Detailed design. Raised, 3-dimensional bolection moulds, complimented by v-grooved or flat panel plaques.
Aire
Hume Murray
Hopkins
Plenty
Hume Lachlan
Yarra
12.18
Doors & Panels
Duraform® Vinyl Wrapped
Doors
Options & Accessories
Fold Backs and Wrap Around Panels Option
End panels are vinyl wrapped and returned without joins.
Ideal for refrigerator panels, pantry panels, island end panels and
decorative pieces for furniture.
18 or 35mm Fold Back
Available in 100, 200, 300, 400 and 500mm returns.
Restricted by sheet size
600
18
100
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.19
Doors & Panels
Doors & Panels
Duraform® Vinyl Wrapped
Doors
Options & Accessories
There is a wide range of options available including:
decorative flutes, circular flutes, wine racks,
roller shutter frames, open shelves, capping mould
and a range of one to eight pane colonial frames.
Flute
Decorative trim
Rose
Column Flute with
singular rose
Flute with
two roses
12.20
Doors & Panels
Duraform® Vinyl Wrapped
Doors
Options & Accessories
Wine Rack Tubes
Available in black, white and stainless steel.
Overall dimension of tube is 310mm front to back
with a 90mm diameter hole.
Cap Moulds
Available in two sizes.
Frames
Frames are available up to 10 panes
depending on door size.
.
Single frame Colonial Four Pane Colonial Six Pane Colonial Eight Pane
Cap Mould Cap Mould 65
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.21
Doors & Panels
Doors & Panels
Duraform® Vinyl Wrapped
Doors
Door Variations
All Duraform doors come standard as square. However, all door profiles are also available with the following variations:
Recess Rails 70 x 25mm
Recess rail dimensions: 70 x 25mm
Available in two profiles, Type C and Type L
Shoulder Arch
Double Arch
Round Arch
Double Bow Arch Bow Arch
Arch
Type C Type L
12.22
Doors & Panels
Duraform® Vinyl Wrapped
Doors
Ordering Tools and Resources
Visit titustekform.com.au
• Download the Janper Vinyl Door order forms
• Download the Janper Door & Panel Brochure
• Visit your local Titus Tekform branch to view
samples and displays Customer:
Address:
Order N°:
Contact: Date Ordered:
Phone: Date Required:
Fax: Job No:
Edge Detail:
(6mm Pencil Round Standard on Series 2 - 3)
TBLR
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Syd 28
29
30
CAPPING MOULD - 2.4m LENGTHS x 38mm HIGH
Tasmania
88 Hopkins St, Moonah, Tas 7009 Phone (03)
6273 1199
Fax (03) 6273 0050
South Australia
8 8447 3700
8 8447 3183 (Fax)
Postal: PO Box 357, Bayswater, VIC, 3153
Wodonga
2/20 Mint Street, Wodonga, VIC, 3690
2 6056 3188
2 6056 3190 (Fax)
Brisbane
1/32 Northlink Place, Virginia, QLD, 4014
07 3266 3999
07 3266 5234 (Fax)
Postal: PO Box 266,
Northgate, QLD, 4013
Townsville
20 Civil Road, Garbutt, QLD, 4814
07 4779 1366
07 4779 1316 (Fax)
Postal: PO Box 7922, Garbutt, QLD, 4815
Northern Territory
1/32 Northlink Place, Virginia, QLD, 4014
07 3266 3999
07 3266 5234 (Fax)
Postal: PO Box 266,
Northgate, QLD, 4013
Sydney
Unit 1&2, 41-43 Whyalla Place, Prestons, NSW,
2170
02 9826 0007
02 9826 0074 (Fax)
Newcastle
Unit 3, 100 Munibung Road, Cardiff, NSW, 2285
02 4954 4011
02 4954 4233 (Fax)
Melbourne
8/59 Jersey Road, Bayswater, VIC, 3153
3 9737 5566
3 9729 8780 (Fax)
Postal: PO Box 357, Bayswater, VIC, 3153
Door Type: Arched or Square: Door Colour:
Customer Use Line
No Qty Height (mm) Width (mm) Description
Alterations and cancellations must be made within 4 hours of the order being placed. Any alterations and cancellations after this time could incur a
charge. All alterations must be in writing quoting the order number.
OFFICE USE ONLY
Job N°. ……………....………………………………...
Invoice N°. ……...………..…………………………...
Terms: COD Account Page N° 1 / 2
6mm Pencil Round Ogee Stepped Pencil Round 2mm Pencil Round Square
X for square edge
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.23
Doors & Panels
Doors & Panels
Alifrost® Aluminium Framed
Doors & Drawer Fronts
Product Overview
• Alifrost® is a range of aluminium framed Perspex®, 3D gloss acrylic,
glass & AliMesh® doors & panels
• Alifrost® offers a modern look with an exclusive range of European
designed frames combined with the latest decorative insert options
• 10 year guarantee applicable on all genuine Perspex® inserts
• Easy maintenance – when supplied with a Perspex® Frost insert,
Alifrost® doors have a unique “anti-fingermark” finish reducing the need
for cleaning
• When inserted with Perspex® & 3D acrylic gloss Acrylic, Alifrost® doors
are ultra hygienic making them ideal for food preparation areas
• Alifrost® doors offer superior impact resistance over glass when used
with Perspex® inserts
• Alifrost® doors with Perspex® are lightweight (half that of glass doors),
making them easier to use & less stress on hardware components
particularly for larger doors
• Environmentally friendly – the two main components of Alifrost® doors,
aluminium & Perspex® are fully recyclable
Product Applications
• Kitchens/bathroom doors, drawers & lift up panels
• Vanity mirror cabinet doors – meets Australian Safety standards
• Alfresco kitchens - Perspex® is guaranteed for 10 years for exterior
applications
• Entertainment units
• Speaker covers - Alimesh® inserts only
• Wardrobes
• Caravans
• Room dividers
12.24
Doors & Panels
Alifrost® Aluminium Framed
Doors & Drawer Fronts
Frame Options
19 Square • Superior clear anodised (CA) finish
• Hollow construction for rigidity
• Suitable for all insert types
• Integrated handle option available
• Recommended for hinge & bi-fold doors, sliding and lift
flap doors
• Powder coat colours also available
43 x 55 Flat • Superior clear anodised (CA) finish
• Hollow construction for rigidity
• Suitable for all insert types
• Integrated handle option available
• Recommended for hinged doors, lift flap and lift up
doors, drawers and sliding doors
43 x 55 - Euro Stainless • Superior Euro Stainless (ES) finish to match the latest
Euro appliances
• Hollow construction for rigidit
• Suitable for all insert types
• Recommended for hinged doors, lift flap and lift up
doors, drawers and sliding doors
9 x 55 Box • Superior clear anodised (CA) finish
• Hollow construction for rigidity
• Suitable for all insert types
• Integrated handle option available
• Recommended for hinged doors, lift flap and lift up
doors, drawers and sliding doors
• Powder coat colours now available
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.25
Doors & Panels
Doors & Panels
Alifrost® Aluminium Framed
Doors & Drawer Fronts
Frame Options
45 x 45 Flat • Superior clear anodised (CA) finish
• Hollow construction for rigidity
• Suitable for all insert types
• Recommended for hinged doors, lift flap and lift up
doors, drawers and sliding door
• Powder coat colours now available
45 x 45 Flat - Brushed Stainless • Superior brushed stainless (BS) finish
• Hollow construction for rigidity
• Suitable for all insert types
• Recommended for hinged doors, lift flap and lift up
doors, drawers and sliding doors
6 x 45 Box - Clear Anodised • Superior clear anodised (CA) finish
• Hollow construction for rigidity
• Suitable for all insert types
• Highly recommended for use with glass as a vanity mirror
• Powder coat colours available
6 x 45 Box - Polished Silver • New polished silver finish with anti scratch ribbed back
• Hollow construction for rigidity
• Suitable for all insert types
• Highly recommended for use with glass as a vanity mirror
12.26
Doors & Panels
Alifrost® Aluminium Framed
Doors & Drawer Fronts
Frame Options
55 Slimline • Superior clear anodised (CA) finish
• Hollow construction for rigidity
• Suitable for non-translucent (NT) inserts only
• Integrated handle option available
• Highly recommended for use with 3D acrylic
gloss inserts
• Powder coat colours available
AliHandle™
• Superior clear anodised (CA) finish
• New integrated, flush fitted handle option
• Suitable for 19 Square, 43 x 55 Flat CA, 9 x 55
• Box & 55 Slimline
• 50,100 & 150mm length options
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.27
Doors & Panels
Doors & Panels
Alifrost® Aluminium Framed
Doors & Drawer Fronts
Insert Options
Perspex® Ultra High Gloss • 01 Black 962
• 02 Café Latte 5263
• 03 Clear 000
• 04 Opal 010 -70% LT
• 05 Opal 030 – 70% LT
• 06 Opal 069 – 9% LT
• 07 Scarlet Rose 4262
• 08 Shadow Grey 9563
• 09 Vanilla 9638
• 10 Green 6T81
Perspex® Frost – Anti Fingermark Finish • 11 Crystal Clear S2 000
• 12 Charcoal Grey S2 9T23
• 13 Glacier Green S2 6T21
• 14 Earth Brown S2 5T33
• 15 Polar White S2 030
• 16 Moonlight White S2 1T41
• 17 Midnight Black S2 9221
• 18 Desert Beige S2 5268
• 19 Walnut Brown S2 5269
• 20 Ash Grey S2 9642
• 21 Mineral Grey S2 9643
Perspex® Pearlescent – Metallic Lustre • 22 Pearl 1PY1
• 23 Platinum 9PY2
Eurmir® - Decorative Acrylic Mirror • 24 Grey 40
12.28
Doors & Panels
Alifrost® Aluminium Framed
Doors & Drawer Fronts
Frame Options
Glass • 25 Clear Glass (toughened)
• 26 Frosted Glass (toughened)
• 27 Glass Safety Mirror
Alimesh® - One Way Vision Aluminium Mesh • 28 Clear Anodised 00001
• 29 Black 19268
• 30 White 81880
• 31 White Birch 37131
Alum Composite • 32 New Brushed Silver AC32
• 33 New Metallic Charcoal BC44W
• 34 New Metallic Sliver BC25
Perspex® Impressions Linear – Textured • 35 Clear P1 000
• 36 Opal P1 030
• 37 Grey P1 9T1D
• 38 Black P1 9221
• 39 Brown P1 5T23
= Translucent LT= Light Transmission Level
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.29
Doors & Panels
Doors & Panels
Alifrost® Aluminium Framed
Doors & Drawer Fronts
Alifrost® Extras
1. Printed patterns available on request (minimum
quantities apply)
2. Custom colours and powder coated frames
available on request (minimum quantities apply)
3. Multiple inserts with Alirail® - a cross rail for
multiple inserts & added rigidity. Suitable for
19 Square, 9 x 55 Box & 43 x 55 Flat frames.
Recommended for doors & panels larger than
1.92sqm
Ordering Alifrost® Doors
Visit titustekform.com.au
• Download the Alifrost® door order form
• Download the latest Alifrost® brochure
• Visit your local Titus Tekform branch to view
samples & displays
1.
2.
3.
12.30
Doors & Panels
Belle Roller Doors
Product Overview
• Belle roller doors are ideal for all storage requirements
• The door glides open & unlike hinged or bi-fold doors,
the entire space in front of the door can be used
• Ideal for concealing kitchen appliances when not in use
with the closed door providing an elegant, streamline look
• Available in laminate, vinyl, timber & MDF
• Doors can be manufactured in any size up to
2 metres x 2 metres
• Doors can be fitted with locks, providing extra security in
commercial & home office applications
• A remote controlled electric motor can be fitted
Product Specifications
Height (mm) A B
To 600 190 110
601-900 200 130
901-1200 210 140
1201-1500 215 155
1501-1800 220 170
1801-2100 225 180
Note:
1) Dimension C equals 100mm when the door is fully opened
2) Add 50mm to DIMENSION A for making installation easier
Side View
Download supporting documentation from the Titus Tekform website titustekform.com.au 12.31
Doors & Panels
Doors & Panels
Belle Roller Doors
Product Specifications
Odering Belle Roller Doors
Visit titustekform.com.au
Download the Belle Roller Door order forms.
Isometric View
Plan View
COMPANY NAME DATE
ORDERED BY
ORDER NUMBER DEL. BRANCH
QTY HEIGHT WIDTH
WORDS WORDS
NOTE: IF WORDS ARE NOT PRINTED, TEKFORM WILL NOT ACCEPT RESPONSIBILITY FOR THE MISREADING OF ILLEGIBLE DIGITS
MDF LAMINATE TIMBER VINYL
COLOUR BRAND
TYPE FINISH
OTHER
DISPLAY DOOR SUPPLIED MATERIAL
MESSAGE - SHOWROOM ADDRESS DELIVERY ADDRESS
STATE POSTCODE
Titus Tekform Pty Ltd
Sydney Unit 1&2, 41-43 Whyalla Place, Prestons, NSW, 2170 PH: 02 9826 0007 FAX: 02 9826 0074
Newcastle Unit 3, 100 Munibung Road, Cardiff, NSW, 2285 PH: 02 4954 4011 FAX: 02 4954 4233
Melbourne
Wodonga 2/20 Mint Street, Wodonga, VIC, 3690 PH: 02 6056 3188 FAX: 02 6056 3190
SA PO Box 357, Bayswater, VIC, 3153 PH: 08 8447 3700 FAX: 08 8447 3183
Tasmania
Brisbane 1/32 Northlink Place, Virginia, QLD, 4014 PH: 07 3266 3999 FAX: 07 3266 5234
Townsville 20 Civil Road, Garbutt, QLD, 4814 PH: 07 4779 1366 FAX: 4779 1316
INTERNAL CARCASE MEASUREMENTS
MATERIAL DESCRIPTION
BELLE ROLLER DOOR ORDER FORM
8/59 Jersey Road, Bayswater, 3153 PH: 03 9737 5566 FAX: 03 9729 8780
88 Hopkins Street, Moonah, TAS, 7009 PH:03 6273 1199 FAX: 03 6273 0050
0.10
Furniture Hardware
· Cabinet connectors
· Concealed hinges
· Soft closing systems
· Drawers and drawer systems
· Kitchen accessories
· Furniture locks
· Decorative
Components
· Dampers
· Precision components
Technologies
· Automation systems
· Precision castings
· Die cast technologies
· Tooling
· Ultrasound fastening technology
· FastFit technology
Precision Components
Technologies
Furniture Hardware
Tooling
Dampers
Damped
components
Connectors Drawers
Damped
hinges
Titusonic
FastFit
Assembly
systems
Die
casting
Worldwide design, manufacturing
and local distribution capabilities
Australia
Victoria
Titus Tekform Pty Ltd
8/59 Jersey Road
Bayswater, VIC, 3153
T: +61 3 9737 5566
Fax: +61 3 9729 8780
Titus Tekform Pty Ltd
2/24 Kane Road
Wodonga, VIC, 3690
T: +61 2 6056 3188
Fax: +61 2 6056 3190
Western Australia
Titus Tekform Pty Ltd
5/2 Wittenberg Drive
Canning Vale, WA, 6155
T: +61 8 9455 2122
Fax: +61 8 9455 3680
South Australia
Titus Tekform Pty Ltd
58 Galway Ave
Marleston, SA, 5033
T: +61 8 7228 2160
New South Wales
Titus Tekform Pty Ltd
83 Jedda Road
Prestons, NSW, 2170
T: +61 2 9826 0007
Fax: +61 2 9826 0074
Titus Tekform Pty Ltd
Unit 3, 100 Munibung Road
Cardiff, NSW, 2285
T: +61 2 4954 4011
Fax: +61 2 4354 4233
Titus Tekform Pty Ltd
Shop 6,
55 Heffernan Street
Mitchell, ACT, 2911
T: +61 2 9826 0007
Fax: +61 2 9826 0074
Tasmania
Titus Tekform Pty Ltd
88 Hopkins Street
Moonah, TAS, 7009
T: +61 3 6273 1199
Fax: +61 3 6273 0050
Queensland
Titus Tekform Pty Ltd
76 Northlink Place
Virginia, QLD, 4014
T: +61 7 3266 3999
Fax: +61 7 3266 5234
Titus Tekform Pty Ltd
Unit 1
719-725 Woolcock Street
Mt Louisa, QLD, 4814
T: +61 7 4779 1366
Fax: +61 7 4779 1316
New Zealand
Stefano Orlati Pty Ltd
337 Lincoln Road
Henderson, Auckland, 0610
T: +64 9 837 0886
Fax: +64 837 8003
Stefano Orlati Pty Ltd
162 Wordsworth Street
Sydenham, Christchurch, 8023
T: +64 3 981 8518
Fax: +64 3 942 7296
Product Catalogue
Titus Tekform
Technical Catalogue
Product
Catalogue
3rd Edition Titus Tekform
www.titustekform.com.au
Titus Tekform Technical Catalogue 2023