Configuring the QoS profile

To configure the Quality of Service (QoS) profile, perform the following steps.

Click Configure on the left pane and select QOS .
Click Profile .

The QOS Profile window is displayed as shown in the figure below.

Figure 825 Configuring a QoS profile
The default queue names are qosp0 , qosp1 , qosp2 , qosp3 , qosp4 , qosp5 , qosp6 , and qosp7 . You can change one or more of the names, if desired. Type the QoS name in the Name field.
The Committed Bandwidth (%) is the percentage of the device outbound bandwidth that is allocated to the queue. Brocade QoS queues require a minimum bandwidth of 3 percent for each priority. Type the percentage of bandwidth you want for the queue in the Requested field.

NOTE
The total of the percentages you enter must be equal to 100. The Brocade device does not adjust the bandwidth percentages you enter.
Click Apply .

The message The change has been made is displayed and the committed bandwidth is changed to the configured value in the Calculated field. The Priority field shows the default priority of the individual QoS from lowest to highest (0 through 7).

To clear the entered data in the fields, click Reset . To configure the QoS profile bind, click Bind . For more information on how to configure a QoS profile bind, refer to Configuring the QoS profile bind.