Comware

Hi Team,

              We have inserted the following two HPE HSR6800 FIP-380 Flex Int Pltfrm Mod JM050A slot  in 6802 Router but showing unknown status for those slot. Could you suggest on this..

[HPE]display device verbose
Slot No. Board type Status Primary SubSlots
---------------------------------------------------------------------
0 RT-RSE-X3 Normal Master 0
1 N/A Absent N/A N/A
2 Unknown Wait N/A N/A
3 Unknown Wait N/A N/A

[HPE]display device manuinfo
Chassis self:
DEVICE_NAME:HPE HSR6802 Router Chassis JG361B
DEVICE_SERIAL_NUMBER:CN03GY3008
MAC_ADDRESS:NONE
MANUFACTURING_DATE:2020-03-14
VENDOR_NAME:HPE
Slot 0 CPU 0:
DEVICE_NAME:HPE HSR6800 RSE-X3 Router MPU JH075A
DEVICE_SERIAL_NUMBER:CN07GXY008
MAC_ADDRESS:4CAE-A386-B9E0
MANUFACTURING_DATE:2020-07-18
VENDOR_NAME:HPE
Slot 2 CPU 0:
DEVICE_NAME:HPE HSR6800 FIP-380 Flex Int Pltfrm Mod JM050A
DEVICE_SERIAL_NUMBER:CN08KXH00X
MAC_ADDRESS:4CAE-A38A-1658
MANUFACTURING_DATE:2020-08-20
VENDOR_NAME:HPE
Slot 3 CPU 0:
DEVICE_NAME:HPE HSR6800 FIP-380 Flex Int Pltfrm Mod JM050A
DEVICE_SERIAL_NUMBER:CN08KXH006
MAC_ADDRESS:4CAE-A38A-14D8
MANUFACTURING_DATE:2020-08-20
VENDOR_NAME:HPE
Fan 1:
DEVICE_NAME:HP HSR6802 Router Spare Fan Assembly JG367A
DEVICE_SERIAL_NUMBER:210212A03WX20300000C
MAC_ADDRESS:NONE
MANUFACTURING_DATE:2020-03-14
VENDOR_NAME:HPE

[HPE]display version
HPE Comware Software, Version 7.1.064, Release 7612
Copyright (c) 2010-2017 Hewlett Packard Enterprise Development LP
HPE HSR6802 uptime is 0 weeks, 0 days, 0 hours, 2 minutes
Last reboot reason : User reboot
Boot image: cfa0:/HSR6800-CMW710-BOOT-R7612.bin
Boot image version: 7.1.064, Release 7612
Compiled Aug 24 2017 16:00:00
System image: cfa0:/HSR6800-CMW710-SYSTEM-R7612.bin
System image version: 7.1.064, Release 7612
Compiled Aug 24 2017 16:00:00

Slot 0: RT-RSE-X3 uptime is 0 week, 0 day, 0 hour, 2 minutes
CPU type: FREESCALE P2020 1000MHz
4096M bytes DDR3 SDRAM Memory
8M bytes Flash Memory
128K bytes NVRAM
PCB Version: Ver.B
Basic Logic Version: 3.0
Extend Logic Version: 2.0
Basic BootWare Version: 2.07
Extend BootWare Version: 2.07
[FIXED PORTS] Console (Hardware)Ver.B, (Driver)1.0, (Cpld)2.0
[FIXED PORTS] AUX (Hardware)Ver.B, (Driver)1.0, (Cpld)2.0
[FIXED PORTS] MGE (Hardware)Ver.B, (Driver)1.0, (Cpld)2.0

Regards

Muthukumar

 

Hi @Muthukumar1 !

For how long do they stay in this "Unknown" state? I see the uptime is 2 minutes only. Did you give them enough time to boot?

 

Hi team,

              This is new implementation and yesterday only powered on the devices but still slot is unknow status so once again reboot the chassis. These logs captured immediately after rebooting so that showing 2min uptime. 

FIP-380 is mentioned for the first time in release notes of HSR6800_7.10.R7809P19 release. I suggest you to upgrade your router to that version - https://h10145.www1.hpe.com/downloads/DownloadSoftware.aspx?SoftwareReleaseUId=28160&ProductNumber=JH075A&lang=&cc=&prodSeriesId=&SaidNumber=

 

Hi team,

OK Thanks and Can we go for following version..

HSR6800_7.10.R7809P20

Logically thinking, yes. Did I test it? No. But I would definitely try the P20, if it doesn't work, then try P19.

 

HI Team, We have upgraded the the following firmware version HSR6800_7.10.R7809P20 , now all the slots are working. Thanks team for your suggestion and follow up.

Hi Team

 

I have same issue here, im inserted JM050A into HSR 6804,

the LED is off and status is unknown

 

already update to P20 but the result still same

 

can you guys help me ? thanks

 

Hi @dittoyuda !

Could you post the output from following commands while the module is plugged in:

display version
display device verbose
display alarm

 

Also, mention the slot your FIP-380 resides in.

BTW, it will be good to check logbuffer in your router using "display logbuffer" command for any errors related to the slot where the FIP-380 is plugged in or the FIP-380 module itself. Did you check it?

Thank you!