top of page
Easy to install - plug-and-play functionality
Automatic overclocking - reach faster speeds and highercapacities just by installing the memory, no adjustments inBIOS needed
Cost-efficient - the perfect combination of price andDDR4 performance
Unique - asymmetrical, signature FURY heat spreader
Design - low profile, black heat spreader color andmatching PCB
Reliable - 100% factory tested
Compatible - tested with all popular brands of motherboards
Guaranteed - lifetime warranty, free technical support

Kingston HyperX FURY Black 8GB 2133MHz DDR4 (HX421C14FB/8)

RD$2,600.00Precio
  • Model

    Brand

    HyperX

    Series

    FURY

    Model

    HX421C14FB/8

    Details

    Capacity

    8GB

    Type

    288-Pin DDR4 SDRAM

    Speed

    DDR4 2133 (PC4 17000)

    Cas Latency

    14

    Timing

    14-14-14

    Voltage

    1.2V

    ECC

    No

    Buffered/Registered

    Unbuffered

    Color

    Black

    Heat Spreader

    Yes

    Features

    HyperX HX421C14FB/8 is a 1G x 64-bit (8GB) DDR4-2133 CL14 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2133 at a low latency timing of 14-14-14 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

    Note:
    The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS.

    JEDEC/XMP TIMING PARAMETERS
    JEDEC/PnP: DDR4-2133 CL14-14-14 @1.2V
    XMP Profile #1: DDR4-2133 CL14-14-14 @1.2V

    FEATURES

    Power Supply: VDD = 1.2V Typical
    VDDQ = 1.2V Typical
    VPP - 2.5V Typical
    VDDSPD = 2.2V to 3.6V
    Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
    Low-power auto self refresh (LPASR)
    Data bus inversion (DBI) for data bus
    On-die VREFDQ generation and calibration
    Single-rank
    On-board I2 serial presence-detect (SPD) EEPROM
    16 internal banks; 4 groups of 4 banks each
    Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
    Selectable BC4 or BL8 on-the-fly (OTF)
    Fly-by topology
    Terminated control command and address bus
    Height 1.23" (31.25mm), w/o heatsink

    Fan Included

    No

bottom of page