Heat Shrinkable Moulded Shapes Brochure - RB Racing
Heat Shrinkable Moulded Shapes Brochure - RB Racing
Heat Shrinkable Moulded Shapes Brochure - RB Racing
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong><br />
Insulation<br />
European Product Guide
Our Corporate Philosophy 4<br />
Our partners, local and global Contacts 6<br />
<strong>Moulded</strong> <strong>Shapes</strong> Expertise 8<br />
1 Technical Introduction<br />
Selection Guide 10<br />
Selection Guide Overview<br />
• Low Profile Boots and Transitions 12<br />
• Bulbous Boots and Transitions 12<br />
• Bulbous Boots and Transitions 13<br />
Technical Information<br />
• Materials for <strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong> 14<br />
• Adhesives for <strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong> 15<br />
Material & Adhesive combinations search 16<br />
2.1 Low Profile Boots and Transitions<br />
Low Profile Convolute Boots<br />
• Helashrink 313C Series, with adapter lip 22<br />
Low Profile Shim Boots<br />
• Helashrink 313E Series, without adapter lip 23<br />
Low Profile Straight Boots<br />
• Helashrink 313F Series, with adapter lip 24<br />
Low Profile Right Angle Boots<br />
• Helashrink 333F Series, with adapter lip, 90° angle 25<br />
Low Profile Transition Boots<br />
• Helashrink 412H Series, side breakout 26<br />
• Helashrink 492H Series, 1 to 2 cables 27<br />
• Helashrink 573H Series, 1 to 3 cables 28<br />
2.2 Bulbous Boots and Transitions<br />
Bottle <strong>Shapes</strong>, VG style<br />
• Helashrink 150 Series, with rib 29<br />
Bottle <strong>Shapes</strong>, MIL style<br />
• Helashrink 100 Series, with rib 31<br />
Bottle <strong>Shapes</strong><br />
• Helashrink 100 Series, without rib 32<br />
• Helashrink 120 Series, with and without rib 34<br />
Page Page<br />
Long Outlet Shape, VG style<br />
• Helashrink 130 Series, with rib, low profile 35<br />
Long Outlet <strong>Shapes</strong><br />
• Helashrink 140 Series, without rib 37<br />
Bottle <strong>Shapes</strong><br />
• Helashrink 160 Series, without rib 38<br />
Bottle <strong>Shapes</strong>, VG style<br />
• Helashrink 170 Series, with rib 39<br />
• Helashrink 190 Series, with external ribs 40<br />
2-Way Outlet <strong>Shapes</strong><br />
• Helashrink 200 Series, low profile 41<br />
2-Way Outlet <strong>Shapes</strong>, VG style<br />
• Helashrink 200 Series 42<br />
2-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 200 Series, in line, low voltage 43<br />
3-Way Outlet <strong>Shapes</strong>, VG style<br />
• Helashrink 300 Series 44<br />
3-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 300 Series, in line, low voltage 45<br />
4-Way Outlet <strong>Shapes</strong>, VG style<br />
• Helashrink 400 Series 46<br />
4-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 400 Series, in line, low voltage 47<br />
5-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 500 Series, in line, low voltage 48<br />
6-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 600 Series, in line, low voltage 49<br />
Right Angle <strong>Shapes</strong>, VG style<br />
• Helashrink 1100 Series, with rib 50<br />
• Helashrink 1100 Series, without rib, thick wall 51<br />
Right Angle <strong>Shapes</strong>, MIL style<br />
• Helashrink 1100 Series, with rib 52<br />
Right Angle <strong>Shapes</strong><br />
• Helashrink 1100 Series, without rib 53<br />
Right Angle <strong>Shapes</strong>, VG style/MIL style<br />
• Helashrink 1100 Series, with rib, low profile 54
Right Angle <strong>Shapes</strong>, VG style<br />
• Helashrink 1100 Series, with rib, low profile, high ratio 56<br />
T-<strong>Shapes</strong>, VG style<br />
• Helashrink 1200 Series 57<br />
T-<strong>Shapes</strong><br />
• Helashrink 1200 Series, Offset 58<br />
T-<strong>Shapes</strong>, VG style<br />
• Helashrink 1200 Series, Offset 59<br />
Angled T-<strong>Shapes</strong>, VG style<br />
• Helashrink 1300 Series, 30° & 45° angle 60<br />
Double T-<strong>Shapes</strong><br />
• Helashrink 1310 Series, 30° angle 61<br />
Angle Elbow <strong>Shapes</strong><br />
• Helashrink 1400 Series, 90° angle 62<br />
Connector Cover for Min-D Series<br />
• Helashrink 1500 Series, with top entry 63<br />
GSR Graduated Strain Relief<br />
• Helashrink 1750 Series with rib 64<br />
Angle <strong>Shapes</strong><br />
• Helashrink 1800 Series, with rib, 30°, 45°, 60° angle 65<br />
Right-Angle Cross <strong>Shapes</strong><br />
• Helashrink 2000 Series - T-Joint 66<br />
Locating Bushes<br />
• Helashrink 1760, 1790, 1820 Series 67<br />
Connector Cover for Min-D Series<br />
• Helashrink 2100 Series, with 90° entry 68<br />
3.1 Breakout Boots and End Caps<br />
2-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 200 Series, in line, low voltage 70<br />
3-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 300 Series, in line, low voltage 71<br />
4-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 400 Series, in line, low voltage 72<br />
End Caps<br />
• Helashrink 1600 Series, low voltage 73<br />
Content<br />
Page Page<br />
Pinched End Caps<br />
• Helashrink PEC Series, low voltage 74<br />
3.2 <strong>Heat</strong> <strong>Shrinkable</strong> Tubing<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing 2:1 - Fluororubber<br />
• Viton®-E 75<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing 2:1 - Elastomer<br />
• SE28 76<br />
• TE28 - light weight 77<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing up to 4:1 - 1 m lengths<br />
• MU47 - medium wall unlined 78<br />
• MA47 - medium wall adhesive lined<br />
3.3 Adaptor Springs<br />
Constant Force Spring Adaptor<br />
• Zetalok 79<br />
3.4 Adhesives<br />
Two-component Adhesive for <strong>Heat</strong> <strong>Shrinkable</strong> Tubing and <strong>Shapes</strong><br />
• V9500 Dosing Gun 80<br />
Hot Melt Tape for <strong>Heat</strong> <strong>Shrinkable</strong> Tubing and <strong>Shapes</strong><br />
• HMT200A 81<br />
High Temperature Hot Melt Adhesive Tape for Low Profile Products<br />
• TSA 200 82<br />
4.1 HellermannTyton Product Standards<br />
Standards for HellermannTyton <strong>Heat</strong> <strong>Shrinkable</strong> Tubing and<br />
<strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong> according to VG Norm 84<br />
Standards for HellermannTyton <strong>Heat</strong> <strong>Shrinkable</strong> Tubing 85<br />
VG/MIL Specification Cross Reference 86<br />
HellermannTyton <strong>Shapes</strong> for use with MIL Connectors 87<br />
MIL Specification Slash Sheet Cross Reference 88<br />
4.2 Terms and Conditions 95
4<br />
Moving the market takes more than good ideas.<br />
Developing the product solutions for the future, requires visionary<br />
thinking and the passion to turn ideas into reality.<br />
When visions become functional products, innovations are<br />
generated that benefit our customers.<br />
We create the conditions for this by employing motivated people<br />
who are committed to working as a team. When only the best<br />
solutions will do, you need dedicated professionals with expert<br />
knowledge.<br />
The result is product solutions that not only reshape the market<br />
but re-develope it.<br />
We are able to offer product solutions before our customers<br />
know they need them.<br />
We maintain good relationships with our customers and also keep<br />
a close eye on the latest market developments. This allows us to<br />
recognise trends affecting trade and industry at an early stage. And<br />
enables us to remain a step ahead of customer requirements at all<br />
times.<br />
Meeting high expectations calls for ongoing development.<br />
As well as paying particular attention to communicating with<br />
our customers and knowledge of the market, we invest heavily in<br />
research and development. To ensure that we can support our<br />
customers into the future by offering custom product solutions,<br />
we continually optimise our technical and logistical processes.
At your service wherever – and whenever – you need us.<br />
What use are the best product solutions if they are not available to<br />
local markets in a timely way? HellermannTyton’s motto is therefore<br />
“Think global, act local”. For us, this not only means responding to<br />
the needs of local markets – we also have a presence there for the<br />
benefit of our customers.<br />
Employees on the ground allow us to cater for cultural, market-<br />
specific and linguistic factors effectively. In addition, our customers<br />
have access to a worldwide distribution network. This adds value<br />
that makes us one of the leading providers for trade and industry.<br />
To truly excel, you need to<br />
keep improving all the time.<br />
Our Corporate Philosophy<br />
Certified processes and quality, for your security.<br />
HellermannTyton always aim for the highest quality.<br />
To live up to this claim we have implemented a quality<br />
and environmental management systems.<br />
Our quality management is certified to DIN EN ISO 9001:2008<br />
and DIN EN ISO/TS 16949:2002.<br />
In addition, our environmental management complies with the<br />
requirements of DIN EN ISO 14001:2005.<br />
DIN EN ISO<br />
9001:2000<br />
DIN EN ISO/TS<br />
16949:2002<br />
DIN EN ISO<br />
14001:2004<br />
5
6<br />
... you will find your local contact here:<br />
Europe<br />
HellermannTyton GmbH – Austria<br />
Obachgasse 6<br />
1221 Vienna<br />
Tel: +43 (0) 1 259 99 55 - 0<br />
Fax: +43 (0)1 259 99 11<br />
E-Mail: office@HellermannTyton.at<br />
www.HellermannTyton.at<br />
HellermannTyton B.V. – Belgium<br />
E-Mail: info@HellermannTyton.be<br />
www.HellermannTyton.be<br />
HellermannTyton – Czech Republic<br />
E-Mail: office.cz@HellermannTyton.at<br />
www.HellermannTyton.cz<br />
HellermannTyton Denmark<br />
Baldersbuen 15D 1. TV<br />
2640 Hedehusene<br />
Tel: +45 702 371 20<br />
Fax: +45 702 371 21<br />
E-Mail: htdk@HellermannTyton.dk<br />
www.HellermannTyton.dk<br />
HellermannTyton Oy – Finland<br />
Sähkötie 8<br />
01510 Vantaa<br />
Tel: +358 9 8700 450<br />
Fax: +358 9 8700 4520<br />
E-Mail: myynti@HellermannTyton.fi<br />
www.HellermannTyton.fi<br />
HellermannTyton S.A.S. – France<br />
2 rue des Hêtres, B.P. 130<br />
78196 Trappes Cedex<br />
Tel: +33 1 30 13 80 00<br />
Fax: +33 1 30 13 80 60<br />
E-Mail: info@HellermannTyton.fr<br />
www.HellermannTyton.fr<br />
HellermannTyton GmbH – Germany<br />
Großer Moorweg 45<br />
25436 Tornesch<br />
Tel: +49 4122 701-0<br />
Fax: +49 4122 701-400<br />
E-Mail: info@HellermannTyton.de<br />
www.HellermannTyton.de<br />
HellermannTyton KFT – Hungary<br />
Kisfaludy u. 13<br />
1044 Budapest<br />
Tel: +36 1 369 4151<br />
Fax: +36 1 369 4151<br />
E-Mail: office@HellermannTyton.hu<br />
www.HellermannTyton.hu<br />
HellermannTyton S.r.l. – Italy<br />
Via Praimbole 9 Bis<br />
35010 Limena (PD)<br />
Tel: +39 049 767 870<br />
Fax: +39 049 767 985<br />
E-Mail: info@HellermannTyton.it<br />
www.HellermannTyton.it<br />
HellermannTyton Ltd – Ireland<br />
Unit 77 Cherry Orchard<br />
Industrial Estate<br />
Ballyfermot, Dublin 10<br />
Tel: +353 1 626 8267<br />
Fax: +353 1 626 8022<br />
E-Mail: sales@HellermannTyton.ie<br />
www.HellermannTyton.co.uk<br />
HellermannTyton B.V. – Netherlands<br />
Vanadiumweg 11-C<br />
3812 PX Amersfoort<br />
Tel: +31 33 460 06 90<br />
Fax: +31 33 460 06 99<br />
E-Mail: info@HellermannTyton.nl<br />
www.HellermannTyton.nl<br />
HellermannTyton AS – Norway<br />
PO Box 240 Alnabru<br />
0614 Oslo<br />
Tel: +47 23 17 47 00<br />
Fax: +47 22 97 09 70<br />
E-Mail: firmapost@HellermannTyton.no<br />
www.HellermannTyton.no<br />
HellermannTyton – Poland<br />
E-Mail: info@HellermannTyton.pl<br />
www.HellermannTyton.pl<br />
OOO HellermannTyton – Russia<br />
St. Petersburg<br />
E-Mail: info@HellermannTyton.ru<br />
www.HellermannTyton.ru<br />
HellermannTyton – Slovenia<br />
Branch Office Ljubljana<br />
Trubarjeva 79<br />
1101 Ljubljana<br />
Tel: +386 1 433 70 56<br />
Fax: +386 1 433 63 21<br />
E-Mail: sales@HellermannTyton.si<br />
www.HellermannTyton.si<br />
HellermannTyton España s.l. –<br />
Spain/Portugal<br />
Avda. de la Industria nº 37, 2º 2ª<br />
28.108 Alcobendas, Madrid<br />
Tel: +34 91 661 2835<br />
Fax: +34 91 661 2368<br />
E-Mail: HellermannTyton@HellermannTyton.es<br />
www.HellermannTyton.es<br />
HellermannTyton AB – Sweden<br />
Datavägen 5, PO Box 569<br />
17526 Järfälla<br />
Tel: +46 8 580 890 00<br />
Fax: +46 8 580 890 01<br />
E-Mail: support@HellermannTyton.se<br />
www.HellermannTyton.se<br />
HellermannTyton Ltd – UK<br />
Manufacturing Site<br />
William Prance Road<br />
Plymouth International Technology Park<br />
Plymouth PL6 5WR<br />
United Kingdom<br />
Tel: +44 (0) 1752 761211<br />
Fax: +44 (0) 1752 761210<br />
E-Mail: info@HellermannTyton.co.uk<br />
www.HellermannTyton.co.uk<br />
Whenever you need us ...<br />
HellermannTyton Ltd – UK<br />
Manufacturing Site<br />
Sharston Green Business Park<br />
1 Robeson Way<br />
Altrincham Road, Wythenshawe<br />
Manchester M22 4TY<br />
Tel: +44 161 945 4181<br />
Fax: +44 161 947 2220<br />
E-Mail: info@HellermannTyton.co.uk<br />
www.HellermannTyton.co.uk<br />
HellermannTyton Ltd – UK<br />
Main Contact for Customer Service<br />
Wharf Approach<br />
Aldridge, Walsall, West Midlands<br />
WS9 8BX<br />
Tel: +44 1922 458 151<br />
Fax: +44 1922 743 237<br />
E-Mail: info@HellermannTyton.co.uk<br />
www.HellermannTyton.co.uk<br />
HellermannTyton Data Ltd – UK<br />
43-45 Salthouse Road<br />
Cornwell Business Park Brackmills<br />
Northampton NN4 7EX<br />
Tel: +44 1604 707 420<br />
Fax: +44 1604 705 454<br />
E-Mail: hns@htdata.co.uk<br />
www.htdata.co.uk<br />
North America<br />
HellermannTyton – Canada<br />
Tel: +1 905 726 1221<br />
Fax: +1 905 726 8538<br />
E-Mail: sales@HellermannTyton.ca<br />
www.HellermannTyton.ca<br />
HellermannTyton – Mexico<br />
Tel: +52 333 133 9880<br />
Fax: +52 333 133 9861<br />
E-Mail: info@HellermannTyton.com.mx<br />
www.HellermannTyton.com<br />
HellermannTyton – USA<br />
Tel: +1 414 355 1130<br />
Fax: +1 414 355 7341<br />
E-Mail: corp@htamericas.com<br />
www.HellermannTyton.com<br />
South America<br />
HellermannTyton – Argentina<br />
Tel: +54 11 4754 5400<br />
Fax: +54 11 4752 0374<br />
E-Mail: ventas@HellermannTyton.com.ar<br />
www.HellermannTyton.com.ar<br />
HellermannTyton – Brazil<br />
Tel: +55 11 4815 9000<br />
Fax: +55 11 4815 9030<br />
E-Mail: vendas@HellermannTyton.com.br<br />
www.HellermannTyton.com.br<br />
www.HellermannTyton.com<br />
Asia-Pacific<br />
HellermannTyton – Australia<br />
Tel: +61 2 9525 2133<br />
Fax: +61 2 9526 2495<br />
E-Mail: cservice@HellermannTyton.com.au<br />
www.HellermannTyton.com.au<br />
HellermannTyton – China<br />
Tel: +86 510 528 2536<br />
Fax: +86 510 528 0112<br />
E-Mail: cservice@HellermannTyton.com.cn<br />
www.HellermannTyton.com.cn<br />
HellermannTyton – Hong Kong<br />
Tel: +852 2832 9090<br />
Fax: +852 2832 9381<br />
E-Mail: cservice@HellermannTyton.com.hk<br />
www.HellermannTyton.com.sg<br />
HellermannTyton – India<br />
Tel: +91 11-2620 9230/6661 9230<br />
Fax: +91 11-2620 9330/6661 9330<br />
E-Mail: cservice@HellermannTyton.co.in<br />
www.HellermannTyton.co.in<br />
HellermannTyton – Japan<br />
Tel: +81 3 5790 3111<br />
Fax: +81 3 5790 3112<br />
E-Mail: cservice@HellermannTyton.co.jp<br />
www.HellermannTyton.co.jp<br />
HellermannTyton – Korea<br />
Tel: +82 2 2614 0157<br />
Fax: +82 2 2614 0284<br />
E-Mail: cservice@HellermannTyton.co.kr<br />
www.HellermannTyton.co.kr<br />
HellermannTyton – Philippines<br />
Tel: +63 2 752 6551<br />
Fax: +63 2 752 6553<br />
E-Mail: cservice@HellermannTyton.com.ph<br />
www.HellermannTyton.com.ph<br />
HellermannTyton – Singapore<br />
Tel: +65 6 852 8585<br />
Fax: +65 6 756 6798<br />
E-Mail: cservice@HellermannTyton.sg<br />
www.HellermannTyton.com.sg<br />
HellermannTyton – Thailand<br />
Tel: +66 2 237 6702<br />
Fax: +66 2 266 8664<br />
E-Mail: cservice@HellermannTyton.com.th<br />
www.HellermannTyton.com.sg<br />
Africa<br />
HellermannTyton – South Africa<br />
Tel: +27 11 879 6680<br />
Fax: +27 11 879 6601<br />
E-Mail: sales.jhb@Hellermann.co.za<br />
www.HellermannTyton.co.za
Contact<br />
If you have a particular problem that you would like us to help you with then please contact us.<br />
With our vast experience and practically unlimited technical capabilities we are confident of being able to help you find a solution.<br />
Remember, we are a service provider and not just a supplier.<br />
Give us a call! Here are your contacts for enquiries and orders<br />
For all product information please visit our Website www.HellermannTyton.co.uk<br />
<strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong><br />
Plymouth<br />
Telephone 00 44 1752 701 261<br />
Facsimile 00 44 1752 790 058<br />
e-mail heatshrinkshapes@HellermannTyton.co.uk<br />
Aldridge<br />
Telephone 00 44 1922 458 151<br />
Facsimile 00 44 1922 743 237<br />
e-mail heatshrinkshapes@HellermannTyton.co.uk<br />
General Contacts<br />
UK Head Office<br />
Telephone 00 44 161 945 4181<br />
Facsimile 00 44 161 947 2233<br />
e-mail ukho@HellermannTyton.co.uk<br />
OEM Sales - Fixings & Fastenings<br />
Telephone 00 44 161 947 2200<br />
Facsimile 00 44 161 945 3708<br />
e-mail sales@HellermannTyton.co.uk<br />
OEM Sales - Insulation & Protection<br />
Telephone 00 44 1752 701 261<br />
Facsimile 00 44 1752 790 058<br />
e-mail insulation&protection@HellermannTyton.co.uk<br />
OEM Sales - Identification<br />
Telephone 00 44 1752 701 261<br />
Facsimile 00 44 1752 790 058<br />
e-mail identification@HellermannTyton.co.uk<br />
OEM Sales - Automated Systems<br />
Telephone 00 44 161 947 2200<br />
Facsimilie 00 44 161 945 3708<br />
e-mail automatedsystems@HellermannTyton.co.uk<br />
7
8<br />
<strong>Heat</strong> <strong>Shrinkable</strong><br />
<strong>Moulded</strong> <strong>Shapes</strong> Expertise<br />
<strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong> Expertise<br />
HellermannTyton heat shrinkable moulded shapes combine the advantages<br />
of quick, easy installation with high electric strength, mechanical toughness<br />
and superior chemical and environmental resistance. Our products offer<br />
important functional and cost saving benefits for electrical and electronic<br />
applications ranging from insulation and protection of individual components<br />
to fabrication of complete inter-connecting cable harness assemblies.<br />
Strain-relieving boots, transitions and connector backshell covers, as well as<br />
other specialised shapes, are available in a wide range of sizes and options.<br />
HellermannTyton's extensive product line includes low profile, bulbous and<br />
lipped types for use on circular and D-type connectors as well as complex<br />
multiway transitions. Only a minimum number of shapes are needed to<br />
cover a full range of applications as the products have high shrink ratios of<br />
up to 5:1.<br />
Applications<br />
The use of our heat shrinkable moulded shapes in conjunction with our<br />
specialist heat shrinkable tubings makes it easy to fabricate complete jacketed<br />
wire and cable harnessing and interconnection systems of the highest quality.<br />
<strong>Heat</strong> shrinkable shapes are available for the complete range of electrical<br />
and electronic harnessing applications. They can be sealed with our special<br />
adhesives and encapsulants to ensure the proper degree of mechanical<br />
support, strain relief and environmental protection. Encapsulating the complete<br />
harnessing and interconnection system to the desired configuration is easily<br />
and neatly accomplished, with minimum weight and bulk.<br />
Choice of Materials<br />
A range of specially formulated materials is available to meet a variety of<br />
performance requirements. Material selection can be made according to<br />
individual applications. We also have the ability to make customized<br />
materials to suit special requirements.<br />
Technical Capabilities<br />
Our materials are formulated in our own laboratory and produced in the<br />
HellermannTyton factory. We have experience and knowledge of all major<br />
applications and offer full technical support from design through to<br />
prototyping, to service.<br />
NOTE:<br />
Copyright to all drawings in this brochure is reserved by HellermannTyton.<br />
They are issued on condition that they are not copied, reproduced or<br />
disclosed to any third party either wholly or in part, without the written<br />
consent of HellermannTyton.
1<br />
Technical Introduction<br />
1 Technical Information<br />
Selection Guide 10<br />
Selection Guide Overview<br />
• Low Profile Boots and Transitions 12<br />
• Bulbous Boots and Transitions 12<br />
• Bulbous Boots and Transitions 13<br />
Technical Information<br />
• Materials for <strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong> 14<br />
• Adhesives for <strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong> 15<br />
Material & Adhesive combinations search 16<br />
Page
1<br />
10<br />
Insulation<br />
XXX Selection Guide<br />
This selection guide will help you to find the correct moulded shape for your application:<br />
Step 1. Product Style<br />
Use the Selection Guide Overview on page 12 to quickly select a suitable product profile.<br />
Step 2. Product Size<br />
Choose the correct dimensions to meet your application from our sizes and types table<br />
which appears on the relevant product profile page. An example of these tables is shown<br />
below:<br />
Step 3. Material/ Adhesive<br />
Choose a material and adhesive to meet your application requirements from the tables<br />
on page 14/15.<br />
Further combinations are available.<br />
Here is an example:<br />
3.1 Material<br />
These symbols denote the material or<br />
adhesive availability for each profile type.<br />
In this example the adhesive W21 is not<br />
available with the material B7,G, and B8<br />
because of the ″-″.<br />
But it is available with<br />
the material H because<br />
of the ″√″.<br />
Parts can be supplied in a choice of materials. The ″combinations″ table on each product<br />
page provides a quick and easy material recognition guide for the product profiled.<br />
The standard colour is black but other colours are available on request, please contact us<br />
for further information.<br />
On page 14 you will find detailed information on our range of materials.
3.2 Adhesive<br />
To maximise environmental protection and strain relief we recommend the use<br />
of an adhesive from our range below.<br />
Pre-lined hot melt adhesive:<br />
• WM250<br />
• W<br />
• W2<br />
• W8<br />
• W21<br />
Step 4. Standard combinations<br />
5. Special Modifications<br />
6. Ordering Procedure<br />
When ordering heat shrinkable shapes, it is necessary to give a complete part number to<br />
enable efficient processing of your order. Part numbers can be made up of the following<br />
typical components:<br />
Example:<br />
154 - 42 - G - P - W8<br />
Component adhesive:<br />
• HMT200A<br />
• W24<br />
• V9500<br />
• TSA-200<br />
For further information on adhesives please refer to page 15.<br />
To help you with your decision we offer standard<br />
combinations for each product type.<br />
In this example we offer the Type 223-2 in B8<br />
material and with the adhesive W.<br />
Filler ports and drain holes are also available where the injection of potting epoxy is required.<br />
P = Filler ports for potting – 3mm Ø vent and 4.5mm Ø filler.<br />
D = Drain holes 4 offset – 3mm Ø at H end equally spaced 90° apart.<br />
Presence and type of adhesive<br />
Filler ports add suffix ″P″; Drain holes add suffix ″D″<br />
Material reference<br />
Expansion and special details<br />
Exact shape<br />
Insulation<br />
Selection Guide XXX<br />
11<br />
1
1<br />
12<br />
Insulation<br />
Selection Guide Overview<br />
Low Profile Boots and Transitions<br />
Low Profile<br />
Convolute Boots<br />
Helashrink 313C Series,<br />
with adapter lip<br />
Low Profile<br />
Straight Boots<br />
Helashrink 313F Series,<br />
with adapter lip<br />
Low Profile<br />
Transition Boots<br />
Helashrink 412H Series,<br />
side breakout<br />
Low Profile<br />
Transition Boots<br />
Helashrink 573H Series,<br />
1 to 3 cables<br />
Bulbous Boots and Transitions<br />
Bottle <strong>Shapes</strong>,<br />
VG style<br />
Helashrink 150 Series,<br />
with rib<br />
Bottle <strong>Shapes</strong><br />
Helashrink 100 Series,<br />
without rib<br />
Long Outlet Shape,<br />
VG style<br />
Helashrink 130 Series,<br />
with rib, low profile<br />
Bottle <strong>Shapes</strong><br />
Helashrink 160 Series,<br />
without rib<br />
Bottle <strong>Shapes</strong>,<br />
VG style<br />
Helashrink 190 Series,<br />
with external ribs<br />
2-Way Outlet <strong>Shapes</strong>,<br />
VG style<br />
Helashrink 200 Series<br />
3-Way Outlet <strong>Shapes</strong>,<br />
VG style<br />
Helashrink 300 Series<br />
Page 22<br />
Low Profile<br />
Shim Boots<br />
Helashrink 313E Series,<br />
without adapter lip<br />
Page 23<br />
Page 24<br />
Page 26<br />
Page 28<br />
Page 29<br />
Bottle <strong>Shapes</strong>,<br />
MIL style<br />
Helashrink 100 Series,<br />
with rib<br />
Page 31<br />
Page 32<br />
Page 35<br />
Page 38<br />
Page 40<br />
Page 42<br />
Page 44<br />
Low Profile<br />
Right Angle Boots<br />
Helashrink 333F Series,<br />
with adapter lip, 90° angle<br />
Low Profile<br />
Transition Boots<br />
Helashrink 492H Series,<br />
1 to 2 cables<br />
Bottle <strong>Shapes</strong><br />
Helashrink 120 Series,<br />
with and without rib<br />
Long Outlet <strong>Shapes</strong><br />
Helashrink 140 Series,<br />
without rib<br />
Bottle <strong>Shapes</strong>,<br />
VG style<br />
Helashrink 170 Series,<br />
with rib<br />
2-Way Outlet <strong>Shapes</strong><br />
Helashrink 200 Series,<br />
low profile<br />
2-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
Helashrink 200 Series,<br />
in line, low voltage<br />
3-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
Helashrink 300 Series,<br />
in line, low voltage<br />
Page 25<br />
Page 27<br />
Page 34<br />
Page 37<br />
Page 39<br />
Page 41<br />
Page 43<br />
Page 45
Bulbous Boots and Transitions<br />
4-Way Outlet <strong>Shapes</strong>,<br />
VG style<br />
Helashrink 400 Series<br />
5-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
Helashrink 500 Series,<br />
in line, low voltage<br />
Right Angle <strong>Shapes</strong>,<br />
VG style<br />
Helashrink 1100 Series,<br />
with rib<br />
Right Angle <strong>Shapes</strong>,<br />
MIL style<br />
Helashrink 1100 Series,<br />
with rib<br />
Right Angle <strong>Shapes</strong>,<br />
VG style/MIL style<br />
Helashrink 1100 Series,<br />
with rib, low profile<br />
T-<strong>Shapes</strong>, VG style<br />
Helashrink 1200 Series<br />
T-<strong>Shapes</strong>, VG style<br />
Helashrink 1200 Series,<br />
Offset<br />
Double T-<strong>Shapes</strong><br />
Helashrink 1310 Series,<br />
30° angle<br />
Connector Cover<br />
for Min-D Series<br />
Helashrink 1500 Series,<br />
with top entry<br />
Angle <strong>Shapes</strong><br />
Helashrink 1800 Series,<br />
with rib, 30°, 45°, 60° angle<br />
Locating Bushes<br />
Helashrink 1760, 1790,<br />
1820 Series<br />
Insulation<br />
Selection Guide Overview<br />
Page 46<br />
4-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
Helashrink 400 Series,<br />
in line, low voltage<br />
Page 47<br />
Page 48<br />
Page 50<br />
Page 52<br />
Page 54<br />
Page 57<br />
Page 59<br />
Page 61<br />
Page 63<br />
Page 65<br />
Page 67<br />
6-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
Helashrink 600 Series,<br />
in line, low voltage<br />
Right Angle <strong>Shapes</strong>,<br />
VG style<br />
Helashrink 1100 Series,<br />
without rib, thick wall<br />
Right Angle <strong>Shapes</strong><br />
Helashrink 1100 Series,<br />
without rib<br />
Right Angle <strong>Shapes</strong>,<br />
VG style<br />
Helashrink 1100 Series,<br />
with rib, low profile,<br />
high ratio<br />
T-<strong>Shapes</strong><br />
Helashrink 1200 Series,<br />
Offset<br />
Angled T-<strong>Shapes</strong>,<br />
VG style<br />
Helashrink 1300 Series,<br />
30° & 45° angle<br />
Angle Elbow <strong>Shapes</strong><br />
Helashrink 1400 Series,<br />
90° angle<br />
GSR Graduated<br />
Strain Relief<br />
Helashrink 1750 Series,<br />
with rib<br />
Right Angle<br />
Cross <strong>Shapes</strong><br />
Helashrink 2000 Series,<br />
T-Joint<br />
Connector Cover<br />
for Min-D Series<br />
Helashrink 2100 Series,<br />
with 90° entry<br />
Page 49<br />
Page 51<br />
Page 53<br />
Page 56<br />
Page 58<br />
Page 60<br />
Page 62<br />
Page 64<br />
Page 66<br />
Page 68<br />
13<br />
1
1<br />
14<br />
Insulation<br />
Technical Information<br />
Materials for <strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong><br />
Material Specifications<br />
Description B7 G J<br />
Material Semi-rigid flame retarded<br />
polyolefin<br />
Material Specifications<br />
Fluid resistant elastomer Flexible polyolefin<br />
Continuous Operating<br />
Temperature °C<br />
-55 to +135 -75 to +150 -55 to +135<br />
Minimum Shrink Temperature °C +135 +135 +135<br />
Specifications MIL-I-81765/1 TYPE I<br />
DEF 59-97<br />
BSG198 Part 5<br />
VG 95343 Pt6 & Pt18<br />
DEF 59-97<br />
BSG198 Part 5<br />
Tensile Strength (MPa) 13 15 14<br />
Ultimate Elongation (%) 500 580 610<br />
Dielectric Strength kV/mm 14 14 12<br />
Flammability<br />
(Self extinguishing)<br />
Excellent Excellent Excellent<br />
Characteristics Good physical and<br />
Excellent resistance<br />
Flexible<br />
chemical resistance<br />
to fuels<br />
Typical applications Military and general high performance harnessing<br />
Material Specifications<br />
Description H B8 L<br />
Material Flexible limited fire hazard material Semi-rigid flame retarded<br />
polyolefin<br />
Description -9 -8 -6<br />
MIL-1-81765/1 TYPE II<br />
DEF 59-97<br />
BSG198 Part 5<br />
Flexible flame retarded<br />
fluoroelastomer<br />
Continuous Operating<br />
Temperature °C<br />
-55 to +105 -55 to +100 -55 to +200<br />
Minimum Shrink Temperature °C +135 +135 +175<br />
Specifications NAVSEA 5617649<br />
DEF 59-97<br />
VG 95343 Pt29<br />
BSG198 Part 5<br />
EA-TS 09-11 MIL-81765/4<br />
DEF Stan 59-97<br />
BSG198 Part 5<br />
Tensile Strength (MPa) 10 15 12<br />
Ultimate Elongation (%) 450 500 300<br />
Dielectric Strength kV/mm 15 15 8<br />
Flammability<br />
(Self extinguishing)<br />
Excellent Good Excellent<br />
Characteristics Low smoke<br />
Good physical and reasonable High temperature excellent chem.<br />
Halogen free<br />
chemical resistance<br />
resistance<br />
Typical applications Ships, submarines & railways Power/utility shapes Military and high performance<br />
harnessing<br />
Material Modified elastomer blend Modified fluoroelastomer Flexible flame retarded polyolefin<br />
Continuous Operating<br />
Temperature °C<br />
-55 to +120 -55 to +150 -55 to +120<br />
Minimum Shrink Temperature °C +135 +135 +135<br />
Specifications SCX15112 SCX15111 MIL-1-81765/1 Type I + II<br />
Tensile Strength (MPa) 12 15 12<br />
Ultimate Elongation (%) 500 450 500<br />
Dielectric Strength kV/mm 20 20 20<br />
Flammability<br />
(Self extinguishing)<br />
Excellent
Adhesives for <strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong><br />
Adhesive Specifications<br />
Description W / W2 WM250 W8<br />
Adhesive General purpose<br />
hot melt adhesive<br />
General purpose<br />
hot melt adhesive<br />
Insulation<br />
Technical Information<br />
EVA, high performance,<br />
hot melt adhesive<br />
Operating Temperature Range °C -55 to +80 -55 to +80 -55 to +105<br />
Softening Point °C +95 +95 +110<br />
Supplied Form pre-applied pre-applied pre-applied<br />
Shelf Life 5 years 5 years 5 years<br />
Solvent Resistance<br />
Fair under splash conditions<br />
Adhesive Specifications<br />
Description W21 W24 TSA-200<br />
Adhesive Modified polyamide<br />
High performance, pre-coat, Thermoset +125° C<br />
hot melt adhesive<br />
1 part epoxy<br />
Operating Temperature Range °C -55 to +120 -75 to +200 -55 to +125<br />
Softening Point °C +120 - -<br />
Supplied Form pre-applied pre-applied Tape<br />
Shelf Life 5 years 5 years 5 years<br />
Solvent Resistance Saline: Very good<br />
De-icing fluid: Excellent<br />
Fair under splash conditions<br />
De-icing fluid: Good<br />
Petrol: Excellent<br />
Diesel: Excellent<br />
Lubricating Oil: Excellent<br />
Lubricating Oil: Good<br />
Hydraulic Oil: Good<br />
Aviation Fuel: Good<br />
Automotive Fuel: Good<br />
Hydraulic Oil: Excellent<br />
Adhesive Specifications<br />
Description V9500 HMT200A<br />
Adhesive Two part, black, epoxy adhesive Hot melt adhesive tape<br />
Operating Temperature Range °C -75 to +150 -55 to +105<br />
Softening Point °C - +110<br />
Supplied Form Cartridge Tape<br />
Shelf Life 18 months 5 years<br />
Solvent Resistance De-icing fluid: Excellent<br />
Petrol: Excellent<br />
Lubricating Oil: Excellent<br />
Hydraulic Oil: Excellent<br />
Fair under splash conditions<br />
15<br />
1
1<br />
16<br />
Insulation<br />
Material & Adhesive Combinations Search<br />
Use this table to find the adhesive compatibility for your preferred material.<br />
Material<br />
Material Combinations G B7 B8 H<br />
Semi -rigid flame<br />
Semi -rigid flame<br />
Flexible limited fire<br />
Material Description<br />
Shape<br />
Fluid resistant elastomer retarded polyolefin retarded polyolefin hazard polyolefin<br />
Minimum Shrink Temperature °C +135 +135 +135 +135<br />
Operating Temperature Range °C -75 to +150 -55 to +135 -55 to +100 -55 to +105<br />
Shelf Life 5 years 5 years 5 years 5 years<br />
Helashrink 100 Series yes yes no yes<br />
Helashrink 1100 Series yes yes no yes<br />
Helashrink 200 Series yes yes no yes<br />
Helashrink 300 Series yes yes no yes<br />
Helashrink 400 Series yes yes no yes<br />
Helashrink 1200 Series yes yes no yes<br />
Helashrink 1300 Series yes yes no yes<br />
Low Profile <strong>Shapes</strong> (Series 313, 412, 492, 573) no no no no<br />
Helashrink 1600 Series no no yes no<br />
Helashrink In Line Series, low voltage no no yes no<br />
Adhesive Compatibility WM250 WM250 WM250 WM250<br />
W8 W8 W8 W8<br />
W24 W24 W24<br />
V9500 V9500 W21<br />
HMT200A HMT200A
Insulation<br />
Material & Adhesive Combinations Search<br />
Material<br />
Material Combinations L -9 -6 -8<br />
Material Description<br />
Flexible flame retarded<br />
fluoroelastomer<br />
Modified elastomer<br />
blend<br />
Flexible flame retarded<br />
polyolefin<br />
Fluoro-elastomer<br />
polymer blend<br />
Shape low profile low profile low profile<br />
Minimum Shrink Temperature °C +175 +135 +135 +135<br />
Operating Temperature Range °C -55 to +200 -55 to +120 -55 to +120 -55 to +150<br />
Shelf Life 5 years<br />
Helashrink 100 Series yes no no no<br />
Helashrink 1100 Series yes no no no<br />
Helashrink 200 Series yes no no no<br />
Helashrink 300 Series yes no no no<br />
Helashrink 400 Series yes no no no<br />
Helashrink 1200 Series yes no no no<br />
Helashrink 1300 Series yes no no no<br />
Low Profile <strong>Shapes</strong> (Series 313, 412, 492, 573) no yes yes yes<br />
Helashrink 1600 Series no no no no<br />
Helashrink In Line Series, low voltage no no no no<br />
Adhesive Compatibility W24 WM250 WM250 WM250<br />
W8 W8 W8<br />
W24 W24 W24<br />
V9500 V9500 V9500<br />
HMT200A HMT200A HMT200A<br />
TSA200 TSA200 TSA200<br />
17<br />
1
1<br />
18<br />
Insulation<br />
Material & Adhesive Combinations Search<br />
Use this table to find the material compatibility for your preferred adhesive.<br />
Adhesive<br />
Adhesive Combinations W / W2 WM250 W8 W21<br />
Adhesive Description<br />
General purpose<br />
hot melt adhesive<br />
General purpose<br />
hot melt adhesive<br />
EVA, high performance,<br />
hot melt adhesive<br />
Modified polyamide<br />
hot melt adhesive<br />
Operating Temperature Range °C -55 to +80 -55 to +80 -55 to +105 -55 to +120<br />
Softening Point °C +95 +95 +110 -<br />
Supplied Form pre-applied pre-applied pre-applied pre-applied<br />
Shelf Life 5 years 5 years 5 years 5 years<br />
Solvent Resistance<br />
Fair under<br />
splash conditions<br />
Fair under<br />
splash conditions<br />
Fair under<br />
splash conditions<br />
Helashrink 100 Series no yes yes yes<br />
Helashrink 1100 Series no yes yes yes<br />
Helashrink 200 Series no yes yes yes<br />
Helashrink 300 Series no yes yes yes<br />
Helashrink 400 Series no yes yes yes<br />
Helashrink 1200 Series no yes yes yes<br />
Helashrink 1300 Series no yes yes yes<br />
Low Profile <strong>Shapes</strong> (Series 313, 412, 492, 573) no yes yes yes<br />
Helashrink 1600 Series yes yes no no<br />
Helashrink In Line Series, low voltage yes yes no no<br />
Material Compatibility B8 G G G<br />
B7 B7 B7<br />
B8 H B8<br />
H -6 H<br />
-6 -9<br />
-9<br />
-8<br />
-8<br />
Saline: Very good<br />
De-icing fluid: Good<br />
Diesel: Excellent<br />
Lubricating Oil: Good<br />
Hydraulic Oil: Good<br />
Aviation Fuel: Good<br />
Automotive Fuel: Good
Insulation<br />
Material & Adhesive Combinations Search<br />
Adhesive<br />
Adhesive Combinations W24 TSA-200 V9500 HMT200A<br />
Adhesive Description<br />
High performance,<br />
pre-coat, 1 part epoxy Thermoset +125°C<br />
Two part, black,<br />
epoxy adhesive Hot melt adhesive tape<br />
Operating Temperature Range °C -75 to +200 -55 to +125 -75 to +150 -55 to +105<br />
Softening Point °C - - - + 110<br />
Supplied Form pre-applied Tape Cartridge Tape<br />
Shelf Life 5 years 5 years 18 months 5 years<br />
Solvent Resistance<br />
De-icing fluid: Excellent<br />
Petrol: Excellent<br />
Lubricating Oil: Excellent Fair under splash<br />
Hydraulic Oil: Excellent conditions<br />
De-icing fluid: Excellent<br />
Petrol: Excellent<br />
Lubricating Oil: Excellent Fair under splash<br />
Hydraulic Oil: Excellent conditions<br />
Helashrink 100 Series yes no yes yes<br />
Helashrink 1100 Series yes no yes yes<br />
Helashrink 200 Series yes no yes yes<br />
Helashrink 300 Series yes no yes yes<br />
Helashrink 400 Series yes no yes yes<br />
Helashrink 1200 Series yes no yes yes<br />
Helashrink 1300 Series yes no yes yes<br />
Low Profile <strong>Shapes</strong> (Series 313, 412, 492, 573) yes yes yes yes<br />
Helashrink 1600 Series no no no yes<br />
Helashrink In Line Series, low voltage no no no yes<br />
Material Compatibility G -6 G G<br />
B7 -9 B7 B7<br />
H -8 H B8<br />
L H<br />
-6 -6<br />
-9 -9<br />
-8 -8<br />
19<br />
1
2.1 Low Profile Boots and Transitions<br />
Low Profile Convolute Boots<br />
• Helashrink 313C Series, with adapter lip 22<br />
Low Profile Shim Boots<br />
• Helashrink 313E Series, without adapter lip 23<br />
Low Profile Straight Boots<br />
• Helashrink 313F Series, with adapter lip 24<br />
Low Profile Right Angle Boots<br />
• Helashrink 333F Series, with adapter lip, 90° angle 25<br />
Low Profile Transition Boots<br />
• Helashrink 412H Series, side breakout 26<br />
• Helashrink 492H Series, 1 to 2 cables 27<br />
• Helashrink 573H Series, 1 to 3 cables 28<br />
2.2 Bulbous Boots and Transitions<br />
Bottle <strong>Shapes</strong>, VG style<br />
• Helashrink 150 Series, with rib 29<br />
Bottle <strong>Shapes</strong>, MIL style<br />
• Helashrink 100 Series, with rib 31<br />
Bottle <strong>Shapes</strong><br />
• Helashrink 100 Series, without rib 32<br />
• Helashrink 120 Series, with and without rib 34<br />
Page Page<br />
Long Outlet Shape, VG style<br />
• Helashrink 130 Series, with rib, low profile 35<br />
Long Outlet <strong>Shapes</strong><br />
• Helashrink 140 Series, without rib 37<br />
Bottle <strong>Shapes</strong><br />
• Helashrink 160 Series, without rib 38<br />
Bottle <strong>Shapes</strong>, VG style<br />
• Helashrink 170 Series, with rib 39<br />
• Helashrink 190 Series, with external ribs 40<br />
2-Way Outlet <strong>Shapes</strong><br />
• Helashrink 200 Series, low profile 41<br />
2-Way Outlet <strong>Shapes</strong>, VG style<br />
• Helashrink 200 Series 42<br />
2-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 200 Series, in line, low voltage 43<br />
3-Way Outlet <strong>Shapes</strong>, VG style<br />
• Helashrink 300 Series 44<br />
3-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 300 Series, in line, low voltage 45<br />
4-Way Outlet <strong>Shapes</strong>, VG style<br />
• Helashrink 400 Series 46
<strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong><br />
4-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 400 Series, in line, low voltage 47<br />
5-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 500 Series, in line, low voltage 48<br />
6-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 600 Series, in line, low voltage 49<br />
Right-Angle <strong>Shapes</strong>, VG style<br />
• Helashrink 1100 Series, with rib 50<br />
• Helashrink 1100 Series, without rib, thick wall 51<br />
Right-Angle <strong>Shapes</strong>, MIL style<br />
• Helashrink 1100 Series, with rib 52<br />
Right-Angle <strong>Shapes</strong><br />
• Helashrink 1100 Series, without rib 53<br />
Right-Angle <strong>Shapes</strong>, VG style/MIL style<br />
• Helashrink 1100 Series, with rib, low profile 54<br />
Right-Angle <strong>Shapes</strong>, VG style/MIL style<br />
• Helashrink 1100 Series, with rib, low profile 55<br />
Right-Angle <strong>Shapes</strong>, VG style<br />
• Helashrink 1100 Series, with rib, low profile, high ratio 56<br />
T-<strong>Shapes</strong>, VG style<br />
• Helashrink 1200 Series 57<br />
2<br />
Page Page<br />
T-<strong>Shapes</strong><br />
• Helashrink 1200 Series, Offset 58<br />
T-<strong>Shapes</strong>, VG style<br />
• Helashrink 1200 Series, Offset 59<br />
Angled T <strong>Shapes</strong>, VG Style<br />
• Helashrink 1300 Series, 30° & 45° angle 60<br />
Double T <strong>Shapes</strong><br />
• Helashrink 1310 Series, 30° angle 61<br />
Angle Elbow <strong>Shapes</strong><br />
• Helashrink 1400 Series, 90° angle 62<br />
Connector Cover for Min-D Series<br />
• Helashrink 1500 Series, with top entry 63<br />
GSR Graduated Strain Relief<br />
• Helashrink 1750 Series, with rib 64<br />
Angle <strong>Shapes</strong><br />
• Helashrink 1800 Series, with rib, 30°, 45°, 60° angle 65<br />
Right-Angle Cross <strong>Shapes</strong><br />
• Helashrink 2000 Series - T-Joint 66<br />
Locating Bushes<br />
• Helashrink 1760, 1790, 1820 Series 67<br />
Connector Cover for Min-D Series<br />
• Helashrink 2100 Series, with 90° entry 68
Insulation<br />
2.1 Low Profile Boots and Transitions<br />
Transition<br />
22<br />
Low Profile Convolute Boots<br />
• Helashrink 313C Series, with adapter lip<br />
This style is used with a circular grooved<br />
adapter to provide strain relief and, if<br />
adhesive is used, excellent environmental<br />
sealing can be achieved.<br />
The convoluted design provides the flexibility<br />
to accommodate different cable outlet angles.<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
313C722-774 Series supplied / fully recovered.<br />
ØJ<br />
max. b<br />
ØH<br />
Adhesive Material<br />
9 8 6<br />
TSA-200 √ √ √<br />
WM250 √ √ √<br />
W8 √ √ √<br />
W24 √ √ √<br />
V9500 √ √ √<br />
HMT200A √ √ √<br />
Without<br />
Adhesive<br />
√ √ √<br />
R<br />
Sizes and Type Table<br />
P<br />
± 10%<br />
Combinations ″On request″<br />
S<br />
T<br />
b: Fully recovered form (after heating)<br />
R<br />
max.<br />
JO<br />
± 10%<br />
B<br />
W<br />
min<br />
P<br />
B<br />
nom.<br />
313C722 14.2 6.9 11.1 4.8 120.6 21.1 17.3 1.5 62.4 1.3 1.5<br />
313C732 22.4 11.7 17.7 8.1 133.3 26.5 19.8 1.5 67.8 1.3 1.5<br />
313C743 34.0 17.5 26.9 12.7 146.0 32.7 22.3 1.5 73.4 1.3 1.8<br />
313C753 44.2 22.3 36.5 17.5 158.7 37.8 25.4 1.5 78.2 1.3 1.8<br />
313C764 53.8 27.9 45.7 22.3 171.4 42.9 28.4 1.5 82.8 2.0 1.8<br />
313C774 77.2 40.6 54.6 22.8 236.2 62.2 25.4 1.5 138.4 2.0 2.0<br />
All dimensions in mm. Subject to technical changes.<br />
JO-<br />
T<br />
± 0.5<br />
W<br />
Standard combinations<br />
Article-No. Type<br />
422-00001 313C722-9<br />
422-00101 313C732-9<br />
422-00201 313C743-9<br />
422-00302 313C753-9<br />
422-00400 313C764-9<br />
422-00501 313C774-9<br />
ØJ<br />
S<br />
± 0.5
Low Profile Shim Boots<br />
• Helashrink 313E Series,<br />
without adapter lip<br />
This part is normally used to build up or<br />
shim a cable diameter to facilitate a better<br />
fit for components in a cable harness.<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
!<br />
For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
ØJ<br />
min. a<br />
Adhesive Material<br />
9 8 6<br />
TSA-200 √ √ √<br />
WM250 √ √ √<br />
W8 √ √ √<br />
W24 √ √ √<br />
V9500 √ √ √<br />
HMT200A √ √ √<br />
Without<br />
Adhesive<br />
√ √ √<br />
Insulation<br />
Low Profile Boots and Transitions<br />
Transition<br />
313E445-457 Series supplied / fully recovered.<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
±10%<br />
b: Fully recovered form (after heating)<br />
HO<br />
± 10%<br />
HW<br />
± 25%<br />
JW<br />
± 25%<br />
JO<br />
± 10%<br />
313E445 12.7 12.7 11.1 3.3 63.5 41.1 1.5 1.5 15.7<br />
313E455 22.1 22.1 11.2 3.3 53.3 27.9 2.3 1.5 15.7<br />
313E447 20.8 14.7 20.6 9.9 63.5 41.1 1.5 1.5 16.5<br />
313E457 22.1 22.1 20.6 9.9 53.3 27.9 2.3 1.5 14.0<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″ Standard combinations<br />
Article-No. Type<br />
422-10000 313E445-9<br />
422-10200 313E455-9<br />
422-10100 313E447-9<br />
422-10300 313E457-9<br />
2.1<br />
23
Insulation<br />
2.1 Low Profile Boots and Transitions<br />
24<br />
Low Profile Straight Boots<br />
• Helashrink 313F Series, with adapter lip<br />
This boot provides strain relief in applications<br />
with partially loaded connectors, resulting in<br />
small cable diameters requiring a high<br />
shrink ratio.<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
313F322-396 Series supplied / fully recovered.<br />
ØJ<br />
max. b<br />
Sizes and Type Table<br />
P<br />
±10%<br />
Adhesive Material<br />
9 8 6<br />
TSA-200 √ √ √<br />
WM250 √ √ √<br />
W8 √ √ √<br />
W24 √ √ √<br />
V9500 √ √ √<br />
HMT200A √ √ √<br />
Without<br />
Adhesive<br />
√ √ √<br />
b: Fully recovered form (after heating)<br />
R<br />
± 15%<br />
T<br />
± 0.8<br />
JO<br />
± 10%<br />
313F322 23.8 9.9 17.2 6.6 105.9 11.6 1.3 86.3 1.5 1.5 1.5<br />
313F332 27.1 13.2 20.8 7.6 121.1 12.1 1.3 98.5 1.5 1.5 1.5<br />
313F343 30.9 18.5 24.3 8.9 138.6 12.1 1.3 112.7 1.7 1.5 1.7<br />
313F353 35.6 22.1 28.7 10.1 159.5 12.1 1.3 130.8 1.7 1.5 1.7<br />
313F364 38.8 28.2 31.4 10.9 177.8 13.9 1.8 142.2 1.7 1.5 1.7<br />
313F374 42.2 32.2 38.3 12.7 203.2 15.2 1.8 163.0 1.7 1.5 1.7<br />
313F385 51.5 45.4 45.4 14.9 203.2 15.2 1.8 157.7 1.7 1.7 1.7<br />
313F396 62.7 45.4 53.3 16.7 228.6 16.0 1.8 153.1 1.7 1.7 1.7<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″<br />
HW<br />
± 1.5<br />
JW<br />
± 0.8<br />
Standard combinations<br />
Article-No. Type<br />
422-20000 313F322-9<br />
422-20100 313F332-9<br />
422-20200 313F343-9<br />
422-20300 313F353-9<br />
422-20400 313F364-9<br />
422-20500 313F374-9<br />
422-20600 313F385-9<br />
422-20700 313F396-9<br />
S<br />
± 1.5
Low Profile Right Angle Boots<br />
• Helashrink 333F Series, with adapter<br />
lip, 90° angle<br />
The boot provides connector strain relief in<br />
applications with partially loaded connectors,<br />
resulting in small cable diameters requiring a<br />
high shrink ratio.<br />
ØH ØJ<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
333F322-385 Series supplied / fully recovered.<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
±10%<br />
Combinations ″On request″<br />
Adhesive Material<br />
9 8 6<br />
TSA-200 √ √ √<br />
WM250 √ √ √<br />
W8 √ √ √<br />
W24 √ √ √<br />
V9500 √ √ √<br />
HMT200A √ √ √<br />
Without<br />
Adhesive<br />
√ √ √<br />
Insulation<br />
Low Profile Boots and Transitions<br />
b: Fully recovered form (after heating)<br />
R<br />
± 15%<br />
T<br />
± 0.8<br />
JO<br />
± 10%<br />
333F322 23.8 9.9 17.2 6.6 105.1 18.5 1.3 87.6 1.5 1.5 1.5<br />
333F332 27.1 13.2 20.8 7.6 115.8 19.8 1.3 99.0 1.5 1.5 1.5<br />
333F343 30.9 18.5 24.3 8.9 146.3 20.8 1.3 114.3 1.7 1.5 1.7<br />
333F353 35.3 21.6 28.7 10.1 172.2 21.8 1.3 132.5 1.7 1.5 1.7<br />
333F364 38.8 27.9 31.4 10.9 185.1 24.1 1.8 143.7 1.7 1.5 1.7<br />
333F374 45.2 34.0 38.3 12.1 213.6 27.4 1.8 169.0 1.7 1.5 1.7<br />
333F385 51.5 41.1 44.4 15.0 224.5 29.4 1.7 173.2 1.7 1.7 1.7<br />
All dimensions in mm. Subject to technical changes.<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
HW<br />
± 1.5<br />
JW<br />
± 0.8<br />
Standard combinations<br />
Article-No. Type<br />
422-30000 333F322-9<br />
422-30004 333F332-9<br />
422-30100 333F343-9<br />
422-30200 333F353-9<br />
422-30301 333F364-9<br />
422-30400 333F374-9<br />
422-30500 333F385-9<br />
S<br />
± 1.5<br />
2.1<br />
25
Insulation<br />
2.1 Low Profile Boots and Transitions<br />
26<br />
Low Profile Transition Boots<br />
• Helashrink 412H Series, side breakout<br />
This style provides connector cable strain<br />
relief and is used in conjunction with a<br />
circular grooved adapter.<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
ØJ/K<br />
min. a<br />
412H622-625 Series supplied / fully recovered.<br />
Sizes and Type Table<br />
ØJ/K<br />
max. b<br />
Combinations ″On request″<br />
b: Fully recovered form (after heating)<br />
HO/JO/KO<br />
± 10%<br />
412H622 19.8 6.6 13.2 6.6 25.4 80.7 1.0 40.3<br />
412H623 34.2 11.4 22.8 6.6 41.1 120.3 1.3 60.1<br />
412H624 60.1 20.0 40.1 20.0 63.5 175.7 1.5 87.8<br />
412H625 83.3 33.2 54.8 33.2 88.9 242.3 1.7 121.1<br />
All dimensions in mm. Subject to technical changes.<br />
Adhesive Material<br />
9 8 6<br />
TSA-200 √ √ √<br />
WM250 √ √ √<br />
W8 √ √ √<br />
W24 √ √ √<br />
V9500 √ √ √<br />
HMT200A √ √ √<br />
Without<br />
Adhesive<br />
√ √ √<br />
P<br />
nom<br />
W<br />
nom<br />
R/S<br />
nom<br />
Standard combinations<br />
Article-No. Type<br />
422-40000 412H622-9<br />
422-40100 412H623-9<br />
422-40200 412H624-9<br />
422-40300 412H625-9
Low Profile Transition Boots<br />
• Helashrink 492H Series, 1 to 2 cables<br />
This style provides strain relief, sealing and<br />
mechanical protection on cable harness<br />
breakouts or transitions.<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
492H412-415 Series supplied / fully recovered.<br />
Sizes and Type Table<br />
ØJ/K<br />
min. a<br />
Combinations ″On request″<br />
Adhesive Material<br />
9 8 6<br />
TSA-200 √ √ √<br />
WM250 √ √ √<br />
W8 √ √ √<br />
W24 √ √ √<br />
V9500 √ √ √<br />
HMT200A √ √ √<br />
Without<br />
Adhesive<br />
√ √ √<br />
Insulation<br />
Low Profile Boots and Transitions<br />
ØJ/K<br />
max. b<br />
b: Fully recovered form (after heating)<br />
HO/JO/KO<br />
+/- 15%<br />
492H412 19.8 6.6 13.2 6.6 25.4 1.0 40.6<br />
492H413 34.2 11.4 22.8 11.4 41.1 1.3 62.9<br />
492H414 60.1 20.0 40.1 20.0 63.5 1.5 94.7<br />
492H415 83.3 33.2 54.8 33.2 49.7 1.7 133.8<br />
All dimensions in mm. Subject to technical changes.<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
W<br />
nom<br />
P/R/S<br />
nom<br />
Standard combinations<br />
Article-No. Type<br />
422-50000 492H412-9<br />
422-50101 492H413-9<br />
422-50202 492H414-9<br />
422-50302 492H415-9<br />
2.1<br />
27
Insulation<br />
2.1 Low Profile Boots and Transitions<br />
28<br />
Low Profile Transition Boots<br />
• Helashrink 573H Series, 1 to 3 cables<br />
This style provides strain relief, sealing and<br />
mechanical protection on cable harness<br />
breakouts or transitions.<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
573H532-535 Series supplied / fully recovered.<br />
ØJ/K/L<br />
min. a<br />
Sizes and Type Table<br />
ØJ/K/L<br />
max. b<br />
Adhesive Material<br />
9 8 6<br />
TSA-200 √ √ √<br />
WM250 √ √ √<br />
W8 √ √ √<br />
V9500 √ √ √<br />
HMT200A √ √ √<br />
Without<br />
Adhesive<br />
√ √ √<br />
b: Fully recovered form (after heating)<br />
P<br />
nom<br />
R/S/T<br />
nom<br />
W<br />
nom<br />
HO/JO/KO/LO<br />
± 15%<br />
573H532 19.8 6.6 13.2 6.6 85.8 42.9 1.0 25.4<br />
573H533 34.2 11.4 20.5 11.4 135.6 67.8 1.3 41.1<br />
573H534 60.1 20.0 36.0 20.0 207.2 103.6 1.5 63.5<br />
573H535 99.8 33.2 54.8 33.2 294.6 147.3 1.7 88.9<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″ Standard combinations<br />
Article-No. Type<br />
422-60000 573H532-9<br />
422-60100 573H533-9<br />
422-60202 573H534-9<br />
422-60302 573H535-9
Bottle <strong>Shapes</strong>, VG style<br />
• Helashrink 150 Series, with rib<br />
This style is used in conjunction with a circular<br />
grooved adaptor, providing strain relief and<br />
enviromental sealing. For VG shapes with<br />
port holes ″P″ please refer to product<br />
standards tables in the appendix.<br />
Type<br />
Designation as per<br />
VG-Norm<br />
ØH<br />
min. a<br />
150 Series supplied.<br />
ØH ØJ<br />
a: Expanded form (supplied)<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
ØH<br />
max. b<br />
Sizes and Type Table<br />
ØJ<br />
min. a<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
b: Fully recovered form (after heating)<br />
R<br />
± 10%<br />
150 Series boot recovered onto a connector.<br />
JO<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
Insulation<br />
Bulbous Boots and Transitions<br />
V<br />
± 10%<br />
152-42 VG 95343 T06 B 001 A 24.0 10.5 24.0 6.0 38.0 21.0 10.0 1.6 0.5 3.0 1.0<br />
153-42 VG 95343 T06 B 002 A 25.0 14.0 9.0 3.5 55.0 28.0 16.0 1.8 0.5 3.0 1.0<br />
154-42 VG 95343 T06 B 003 A 30.0 14.0 30.0 6.0 55.0 32.0 13.0 1.8 1.0 3.0 1.0<br />
155-42 VG 95343 T06 B 004 A 31.0 18.0 31.0 7.0 67.0 35.0 18.0 1.8 1.0 3.0 1.0<br />
156-42 VG 95343 T06 B 005 A 36.0 22.5 36.0 8.5 80.0 42.0 20.0 2.0 1.0 3.0 1.0<br />
157-43 VG 95343 T06 C 001 A 43.0 28.0 43.0 10.0 99.0 61.0 20.0 2.2 1.0 3.0 1.7<br />
158-43 VG 95343 T06 C 002 A 60.0 35.0 60.0 16.0 130.0 72.0 38.0 3.2 1.5 3.0 1.7<br />
159-43 VG 95343 T06 C 003 A 66.0 45.0 66.0 17.0 171.0 90.0 50.0 3.8 2.0 3.0 2.0<br />
160-43 VG 95343 T06 C 004 A 82.0 58.0 82.0 27.0 213.0 113.0 62.0 3.8 3.8 3.0 2.0<br />
152-41 VG 95343 T06 A 001 A 24.0 10.5 24.0 6.0 26.0 9.0 10.0 1.6 0.5 3.0 1.0<br />
153-41 VG 95343 T06 A 002 A 25.0 14.0 9.0 3.5 40.0 13.0 16.0 1.8 0.5 3.0 1.0<br />
154-41 VG 95343 T06 A 003 A 30.0 14.0 30.0 6.0 43.0 20.0 13.0 1.8 1.0 3.0 1.0<br />
155-41 VG 95343 T06 A 004 A 31.0 18.0 31.0 7.0 47.0 15.0 18.0 1.8 1.0 3.0 1.0<br />
156-41 VG 95343 T06 A 005 A 36.0 22.5 36.0 8.5 60.0 22.0 20.0 2.0 1.0 3.0 1.0<br />
159-41 VG 95343 T06 A 008 A 66.0 45.0 66.0 17.0 130.0 50.0 50.0 3.8 2.0 3.0 2.0<br />
157-42 VG 95343 T06 B 006 A 43.0 28.0 43.0 10.0 79.0 41.0 20.0 2.2 1.0 3.0 1.7<br />
158-41 VG 95343 T06 A 007 A 60.0 35.0 60.0 16.0 90.0 32.0 38.0 3.2 1.5 3.0 1.7<br />
159-41 VG 95343 T06 A 008 A 66.0 45.0 66.0 17.0 130.0 50.0 50.0 3.8 2.0 3.0 2.0<br />
159-42 VG 95343 T06 B 008 A 66.0 45.0 66.0 17.0 150.0 70.0 50.0 3.8 2.0 3.0 2.0<br />
160-41 VG 95343 T06 A 009 A 82.0 58.0 82.0 27.0 137.0 37.0 62.0 3.8 3.8 3.0 2.0<br />
160-42 VG 95343 T06 B 009 A 82.0 58.0 82.0 27.0 158.0 58.0 62.0 3.8 3.8 3.0 2.0<br />
All dimensions in mm. Subject to technical changes.<br />
T<br />
± 20%<br />
2.2<br />
29
2.2<br />
30<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Bottle <strong>Shapes</strong>, VG style<br />
• Helashrink 150 Series, with rib<br />
150 Series supplied. 150 Series boot recovered onto a connector.<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
W21 √ √ √ √ -<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Standard combinations<br />
Article-No. Type<br />
401-52880 152-42-G<br />
401-53880 153-42-G<br />
401-54880 154-42-G<br />
401-55880 155-42-G<br />
401-56880 156-42-G<br />
401-57980 157-43-G<br />
401-58980 158-43-G<br />
401-59980 159-43-G<br />
401-60980 160-43-G<br />
401-52780 152-41-G<br />
401-53780 153-41-G<br />
401-54780 154-41-G<br />
401-55780 155-41-G<br />
401-56780 156-41-G<br />
401-59780 159-41-G<br />
401-57880 157-42-G<br />
401-58780 158-41-G<br />
401-59780 159-41-G<br />
401-59880 159-42-G<br />
401-60780 160-41-G<br />
401-60880 160-42-G
Bottle <strong>Shapes</strong>, MIL style<br />
• Helashrink 100 Series, with rib<br />
This style is used in conjunction with a<br />
circular grooved adaptor providing strain<br />
relief and environmental sealing when<br />
used in conjunction with one of our<br />
complementary adhesives.<br />
ØH<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
ØJ<br />
max. b<br />
ØJ<br />
Sizes and Type Table<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
Insulation<br />
Bulbous Boots and Transitions<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
V<br />
± 10%<br />
T<br />
± 20%<br />
1030-4 12.0 9.8 6.0 2.0 19.0 8.0 1.0 0.5 1.5 0.5 4.6<br />
1031-4 12.0 9.8 6.0 2.0 15.0 4.0 1.0 0.5 1.5 0.5 4.6<br />
1037-4 9.0 5.6 9.0 2.0 19.0 9.0 1.0 0.6 1.5 0.6 4.5<br />
1009-1 9.0 5.6 4.0 3.2 27.0 14.0 1.0 0.5 1.6 0.9 7.5<br />
113-4 10.7 7.9 4.6 2.0 25.4 14.5 1.3 1.0 3.0 1.0 4.6<br />
104-4 16.5 7.9 16.5 3.8 25.4 14.2 1.3 1.3 3.0 1.0 6.9<br />
105-4 23.4 10.4 23.4 5.6 38.1 14.2 1.5 1.5 3.0 1.0 10.2<br />
106-4 31.0 14.2 31.0 6.6 55.4 22.9 1.8 1.8 3.0 1.0 10.2<br />
101-4 31.0 17.8 31.0 7.1 67.0 38.1 2.0 2.0 3.0 1.0 17.8<br />
102-4 36.1 22.4 36.1 8.4 73.7 43.2 1.8 1.8 3.0 1.0 21.0<br />
103-4 42.7 28.2 42.7 9.9 99.1 54.0 2.0 2.0 3.0 1.7 24.0<br />
107-4 51.9 35.1 51.9 15.8 124.5 66.0 3.1 3.1 3.0 1.7 40.6<br />
118-4 66.0 44.4 66.0 20.3 160.5 91.4 3.8 3.8 3.0 2.0 48.3<br />
All dimensions in mm. Subject to technical changes.<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
104-4 supplied / fully recovered.<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
W21 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
V9500 √ √ √ √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
b: Fully recovered form (after heating)<br />
S<br />
nom<br />
Standard combinations<br />
Article-No. Type<br />
410-30480 1030-4-G<br />
410-31001 1031-4-G<br />
410-37001 1037-4-G<br />
410-09001 1009-1-G<br />
401-13480 113-4-G<br />
401-04024 104-4-G<br />
401-05034 105-4-G<br />
401-06036 106-4-G<br />
401-01037 101-4-G<br />
401-02031 102-4-G<br />
401-03041 103-4-G<br />
401-07030 107-4-G<br />
401-18018 118-4-B7<br />
2.2<br />
31
2.2<br />
32<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Bottle <strong>Shapes</strong><br />
• Helashrink 100 Series, without rib<br />
This style provides connector cable strain<br />
relief. Can be installed on the connector<br />
rear thread or plain shaft and allows easy<br />
re-entry for repair when combined with a<br />
hot melt adhesive.<br />
ØH<br />
a: Expanded form (supplied)<br />
109-1-G supplied / fully recovered.<br />
Type<br />
ØJ<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
b: Fully recovered form (after heating)<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
R<br />
max.<br />
HW<br />
± 20%<br />
JW<br />
± 30%<br />
S<br />
nom<br />
104-1 16.5 7.9 16.5 3.8 25.4 14.2 1.3 1.3 6.9<br />
104-2 10.7 7.9 8.4 3.8 25.4 14.2 1.3 1.3 6.9<br />
105-1 23.4 10.4 23.4 5.6 38.1 22.9 1.5 1.5 10.2<br />
106-1 31.0 14.2 31.0 6.6 55.4 26.5 1.8 1.8 16.5<br />
106-2 19.3 14.2 14.2 6.6 55.4 26.5 1.8 1.8 16.5<br />
101-1 31.0 17.8 31.0 7.1 66.0 38.1 2.0 2.0 17.8<br />
101-2 23.9 17.8 15.5 7.1 66.0 38.1 2.0 2.0 17.8<br />
102-1 36.1 22.4 36.1 8.4 73.7 43.2 1.8 1.8 17.8<br />
102-2 30.0 22.4 18.0 8.4 73.7 43.2 1.8 1.8 17.8<br />
1006-1 40.0 20.0 20.0 6.0 78.8 30.0 1.5 1.0 20.0<br />
103-1 42.7 28.2 42.7 9.9 95.5 54.0 2.0 2.0 24.0<br />
103-2 37.8 28.2 21.3 9.9 95.5 54.0 2.0 2.0 24.0<br />
107-1 51.9 35.1 51.9 15.8 124.5 66.0 3.1 3.1 40.6<br />
107-2 46.9 35.1 35.6 15.8 124.5 66.0 3.1 3.1 40.6<br />
118-1 66.0 44.4 66.0 20.3 150.0 80.0 3.8 3.8 48.3<br />
119-1 86.4 57.2 86.4 26.6 209.6 118.1 4.6 4.6 61.0<br />
113-1 10.7 7.9 4.6 2.0 25.4 14.5 1.3 1.0 4.6<br />
113-2 21.6 7.9 5.8 2.0 25.4 14.5 1.3 1.3 4.6<br />
108-1 13.7 10.4 6.6 3.1 38.1 22.9 1.5 1.0 7.6<br />
108-2 27.9 10.4 7.9 3.1 38.1 22.9 1.5 1.0 7.6<br />
109-1 19.3 14.2 8.1 4.1 53.3 35.6 2.0 1.3 7.6<br />
109-2 38.1 14.2 11.7 4.1 53.3 35.6 2.0 1.3 7.6<br />
110-1 23.9 17.8 11.7 5.6 63.5 38.1 2.5 1.5 12.7<br />
110-2 50.8 17.8 17.0 5.6 63.5 38.1 2.5 1.5 12.7<br />
111-1 30.0 22.4 14.7 7.1 76.2 43.2 3.1 1.8 15.2<br />
111-2 63.5 22.4 21.3 7.1 76.2 43.2 3.1 1.8 15.2<br />
116-1 59.4 44.5 43.7 20.8 158.8 91.4 5.6 4.6 41.9<br />
All dimensions in mm. Subject to technical changes.
Bottle <strong>Shapes</strong><br />
• Helashrink 100 Series, without rib<br />
109-1-G supplied / fully recovered.<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ -<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Standard combinations<br />
Article-No. Type<br />
401-04006 104-1-G<br />
401-04017 104-2-G<br />
401-05005 105-1-G<br />
401-06005 106-1-G<br />
401-06023 106-2-G<br />
401-01006 101-1-G<br />
401-01026 101-2-G<br />
401-02005 102-1-G<br />
401-02020 102-2-G<br />
410-06006 1006-1-B7<br />
401-03006 103-1-G<br />
401-03024 103-2-B7<br />
401-07006 107-1-G<br />
401-07016 107-2-B7<br />
401-18005 118-1-G<br />
401-19001 119-1-B7<br />
401-13180 113-1-G<br />
401-13011 113-2-G<br />
401-08001 108-1-B7<br />
401-08016 108-2-G<br />
401-09002 109-1-B7<br />
401-09011 109-2-G<br />
401-10005 110-1-G<br />
401-10011 110-2-G<br />
401-11003 111-1-J<br />
401-11011 111-2-G<br />
401-16007 116-1-B7.<br />
2.2<br />
33
2.2<br />
34<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Bottle <strong>Shapes</strong><br />
• Helashrink 120 Series,<br />
with and without rib<br />
This style has a long tail providing extended<br />
strain relief for small diameter wires and<br />
can be supplied with or without rib and in<br />
various material / adhesive combinations<br />
to meet your requirement.<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
*Note: 120-41 & 42 are with end ribs.<br />
ØJ<br />
min. a<br />
120-42-G supplied / fully recovered.<br />
ØJ<br />
max. b<br />
R<br />
± 10%<br />
Sizes and Type Table<br />
W<br />
± 20%<br />
P<br />
± 10%<br />
b: Fully recovered form (after heating)<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
V<br />
± 10%<br />
T<br />
± 10%<br />
120-1 16.5 7.0 10.2 3.0 24.0 1.3 60.9 1.3 1.3 – – 32.0<br />
120-2 20.3 7.0 10.2 3.0 24.0 1.3 60.9 1.3 1.3 – – 32.0<br />
120-3 16.5 7.0 10.7 3.0 24.0 1.3 38.0 1.3 1.3 – – 9.1<br />
120-41* 16.5 7.0 10.7 3.0 24.0 1.3 38.0 1.3 1.3 3.0 1.0 32.0<br />
120-42* 16.5 7.0 10.2 3.0 24.0 1.3 60.9 1.3 1.3 3.0 1.0 –<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 - √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Standard combinations<br />
Article-No. Type<br />
401-20003 120-1-G<br />
401-20014 120-2-G<br />
401-20020 120-3-G<br />
401-20022 120-41-G<br />
401-20026 120-42-G<br />
S<br />
nom
Long Outlet Shape, VG style<br />
• Helashrink 130 Series,<br />
with rib, low profile<br />
This style is low profile and lightweight.<br />
Typically used on airborne harnesses.<br />
Rib locates on circular backshell. For<br />
VG shapes with port holes ″P″ please refer to<br />
product standards tables in the appendix.<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
ØH ØJ<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
ØH<br />
min. a<br />
135-1 supplied / fully recovered.<br />
ØH<br />
max. b<br />
Sizes and Type Table<br />
ØJ<br />
min. a<br />
ØJ<br />
max. b<br />
Insulation<br />
Bulbous Boots and Transitions<br />
b: Fully recovered form (after heating)<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
V<br />
± 10%<br />
129-1 VG95343T06D001A 22.0 12.0 22.0 6.5 76.0 12.0 1.5 1.1 3.0 1.0<br />
130-1 VG95343T06D002A 25.5 15.0 25.5 7.5 83.0 12.0 1.5 1.1 3.0 1.0<br />
131-1 VG95343T06D003A 29.0 19.0 29.0 8.5 89.0 12.0 1.8 1.1 3.0 1.0<br />
132-1 VG95343T06D004A 34.0 23.0 34.0 10.0 102.0 12.0 1.8 1.1 3.0 1.0<br />
133-1 VG95343T06D005A 37.0 30.0 37.0 11.0 108.0 14.0 2.0 1.1 3.0 1.7<br />
134-1 VG95343T06D006A 43.5 34.0 43.5 12.0 114.0 15.0 2.0 1.1 3.0 1.7<br />
135-1 VG95343T06D007A 50.0 41.0 50.0 14.5 118.0 15.0 2.3 1.4 3.0 1.7<br />
136-1 VG95343T06D008A 62.5 47.0 62.5 18.0 121.0 16.0 2.5 1.4 3.0 2.0<br />
138-1 VG95343T06D009A 69.0 60.0 69.0 20.0 127.0 16.0 2.5 1.4 3.0 2.0<br />
187-1 VG95343T06D010A 81.5 67.0 81.5 23.0 133.0 16.0 2.5 1.4 3.0 2.0<br />
129-4 – 22.3 11.4 22.3 6.5 105.9 11.7 1.5 1.1 3.0 1.0<br />
130-4 – 25.6 15.0 25.6 7.4 121.2 12.2 1.5 1.1 3.0 1.0<br />
131-4 – 29.4 18.8 29.4 8.4 138.7 12.2 1.8 1.1 1.0 1.0<br />
132-2 – 34.0 22.9 34.0 9.7 35.0 12.2 1.8 1.1 3.0 1.0<br />
132-4 – 34.0 22.9 34.0 9.7 159.5 12.2 1.8 1.1 3.0 1.0<br />
133-2 – 37.3 26.9 37.3 10.4 47.0 14.0 2.0 1.1 3.0 1.7<br />
133-3 – 37.3 29.5 37.3 10.4 60.0 14.0 2.0 1.1 3.0 1.7<br />
133-4 – 37.3 26.9 37.3 10.4 177.8 14.0 2.0 1.1 3.0 1.7<br />
134-4 – 43.7 34.0 43.7 12.2 203.2 15.2 2.0 1.1 3.0 1.7<br />
135-4 – 50.0 41.2 50.0 14.2 203.2 15.2 2.3 1.4 3.0 1.7<br />
136-2 – 70.0 47.0 70.0 17.5 125.0 16.0 2.5 1.4 3.0 2.0<br />
136-4 – 62.7 47.0 62.7 17.5 203.2 16.0 2.5 1.4 3.0 2.0<br />
All dimensions in mm. Subject to technical changes.<br />
T<br />
± 10%<br />
2.2<br />
35
2.2<br />
36<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Long Outlet Shape, VG style<br />
• Helashrink 130 Series,<br />
with rib, low profile<br />
135-1 supplied / fully recovered.<br />
Combinations ″On request″ Standard combinations<br />
Adhesive Material<br />
Article-No. Type<br />
B7 G J H L 401-29180 129-1-G<br />
WM250 √ √ √ √ - 401-30180 130-1-G<br />
W8 √ √ √ √ - 401-31180 131-1-G<br />
W24 √ √ √ √ √ 401-32180 132-1-G<br />
V9500 √ √ √ √ - 401-33180 133-1-G<br />
HMT200A √ √ √ √ - 401-34180 134-1-G<br />
W21 √ √ √ √ - 401-35180 135-1-G<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
401-36180<br />
401-38180<br />
136-1-G<br />
138-1-G<br />
401-87180 187-1-G<br />
401-29025 129-4-G<br />
401-30021 130-4-G<br />
401-31028 131-4-G<br />
401-32014 132-2-G<br />
401-32030 132-4-G<br />
401-33008 133-2-JWM250<br />
401-33036 133-3-B7WM250<br />
401-33021 133-4-G<br />
401-34015 134-4-G<br />
401-35009 135-4-G<br />
401-36024 136-2-JW8<br />
401-36006 136-4-G<br />
401-36008 136-4-J
Long Outlet <strong>Shapes</strong><br />
• Helashrink 140 Series, without rib<br />
This style is low profile and lightweight, ideally<br />
suited to aerospace harness assemblies, the<br />
extended tail provides excellent strain relief<br />
and flexibility.<br />
a: Expanded form (supplied)<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
146-1 supplied / fully recovered.<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Insulation<br />
Bulbous Boots and Transitions<br />
ØJ<br />
min. a<br />
b: Fully recovered form (after heating)<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 30%<br />
S<br />
nom<br />
146-1 20.1 14.5 20.1 5.3 127.0 15.7 2.0 2.0 97.0<br />
146-2 22.3 14.5 10.2 5.3 127.0 15.7 2.0 2.0 97.0<br />
148-1 30.5 18.0 30.5 7.9 146.0 15.7 2.0 2.0 125.0<br />
148-2 30.5 18.0 15.2 7.9 146.0 15.7 2.3 2.3 125.0<br />
149-1 41.2 21.8 41.2 10.2 162.1 22.4 2.3 2.3 –<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A - √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Standard combinations<br />
Article-No. Type<br />
401-46001 146-1-B7<br />
401-46009 146-2-G<br />
401-48006 148-1-G<br />
401-48016 148-2-J<br />
401-49006 149-1-J<br />
2.2<br />
37
2.2<br />
38<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Bottle <strong>Shapes</strong><br />
• Helashrink 160 Series, without rib<br />
This style is a straight boot used for cable<br />
strain relief and environmental protection<br />
on many applications and is ideally suited<br />
where space is a premium.<br />
ØH<br />
a: Expanded form (supplied)<br />
162-1-G supplied / fully recovered.<br />
ØJ<br />
Combinations ″On request″ Standard combinations<br />
Adhesive Material<br />
B7 G J H<br />
WM250 √ √ √ √<br />
W8 √ √ √ √<br />
W24 √ √ √ √<br />
V9500 √ √ √ √<br />
HMT200A √ √ √ √<br />
W21 - - - √<br />
Without<br />
Adhesive<br />
√ √ √ √<br />
b: Fully recovered form (after heating)<br />
Sizes and Type Table<br />
ØH ØH ØJ ØJ P R HW JW S<br />
Type min. a max. b min. a max. b ± 10% ± 10% ± 20% ± 20% nom<br />
162-1 22.0 14.2 9.0 4.1 44.0 15.7 1.8 1.8 16.0<br />
All dimensions in mm. Subject to technical changes.<br />
Article-No. Type<br />
401-62180 162-1-G
Bottle <strong>Shapes</strong>, VG style<br />
• Helashrink 170 Series, with rib<br />
This style provides cable strain relief in<br />
applications using partially loaded connectors,<br />
resulting in small cable diameters. When<br />
used in conjunction with our W24 adhesive,<br />
excellent chemical resistance can also be<br />
achieved.<br />
ØH ØJ<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
ØH<br />
min. a<br />
177-1-G supplied / fully recovered.<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Insulation<br />
Bulbous Boots and Transitions<br />
P<br />
± 10%<br />
b: Fully recovered form (after heating)<br />
R<br />
± 10%<br />
T<br />
± 20%<br />
HW<br />
± 20%<br />
1724-1 – 20.0 16.5 20.0 4.5 42.0 20.0 – 1.0 1.0 3.3 10.0<br />
1738-1 – 20.0 16.5 20.0 4.5 32.0 10.0 – 1.0 1.0 3.3 22.0<br />
176-1 VG95343T06D011A 19.3 13.0 6.3 2.1 60.0 11.7 1.0 1.5 1.1 3.3 38.0<br />
176-2 – 19.0 13.0 6.0 2.0 30.0 11.7 1.0 1.5 1.1 3.3 8.0<br />
176-3 – 25.0 13.0 4.0 2.0 45.0 11.7 1.0 1.5 1.1 3.3 23.0<br />
176-4 – 19.0 13.0 6.0 2.0 60.0 11.7 1.0 1.5 1.1 3.3 38.0<br />
177-1 VG95343T06D012A 26.1 19.1 7.6 2.6 74.0 12.2 1.0 1.8 1.1 3.3 45.0<br />
178-1 VG95343T06D013A 34.2 26.0 9.6 3.1 84.0 12.2 1.0 1.8 1.1 3.3 51.0<br />
179-1 VG95343T06D014A 43.6 34.1 11.4 3.6 100.0 12.2 1.7 1.8 1.1 3.3 58.0<br />
All dimensions in mm. Subject to technical changes.<br />
JW<br />
nom<br />
V<br />
max<br />
Combinations ″On request″ Standard combinations<br />
S<br />
nom<br />
Article-No. Type<br />
417-24003 1724-1-B7WM250B<br />
417-38002 1738-1-B8WM250<br />
401-76180 176-1-G<br />
401-76014 176-2-B7<br />
401-76018 176-3-G<br />
401-77023 177-1-G<br />
401-77180 177-1-G<br />
401-78180 178-1-G<br />
401-79180 179-1-G<br />
2.2<br />
39
2.2<br />
40<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Bottle <strong>Shapes</strong>, VG style<br />
• Helashrink 190 Series,<br />
with external ribs<br />
This style was developed specifically for small<br />
audio connectors with multiple external ribs<br />
to improve grip in harsh conditions.<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
ØH<br />
min. a<br />
Recovered 199-4-G, VG style shape for small audio<br />
connectors with external ribs for improved grip.<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
b: Fully recovered form (after heating)<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
V<br />
± 10%<br />
T<br />
± 20%<br />
199-4 VG 95343 T06 A 010 A 17.5 14.0 7.0 4.3 70.0 35.0 1.8 0.5 1.5 1.0 20.0<br />
199-6 – 18.5 14.0 18.5 4.3 70.0 35.0 1.8 0.5 1.5 1.0 20.0<br />
All dimensions in mm. Subject to technical changes.<br />
ØH<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H<br />
WM250 √ √ √ √<br />
W8 √ √ √ √<br />
W24 √ √ √ √<br />
V9500 √ √ √ √<br />
HMT200A √ √ √ √<br />
W21 - - - √<br />
Without<br />
Adhesive<br />
√ √ √ √<br />
HW<br />
T<br />
V<br />
P<br />
R S<br />
Standard combinations<br />
Article-No. Type<br />
401-99480 199-4-G<br />
401-99007 199-6-G<br />
Ø2.3<br />
JW<br />
ØJ<br />
S<br />
nom
2-Way Outlet <strong>Shapes</strong><br />
• Helashrink 200 Series, low profile<br />
Branching parts are employed for mechanical<br />
tension relief in harnesses, where multi<br />
core cables are required to be routed out in<br />
different directions. High ratio expansion<br />
allows for quick and easy installation times.<br />
a: Expanded form (supplied)<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
203-1-G supplied / fully recovered.<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Adhesive Material<br />
B7 G J H B8<br />
WM250 √ √ √ √ √<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ -<br />
V9500 √ √ √ - -<br />
HMT200A √ √ √ - √<br />
W21 - - - - -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Insulation<br />
Bulbous Boots and Transitions<br />
ØJ<br />
min. a<br />
b: Fully recovered form (after heating)<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
ØK<br />
min. a<br />
ØK<br />
max. b<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
W<br />
± 20%<br />
201-1 19.0 9.4 6.4 14.0 6.4 14.0 50.8 30.5 1.5<br />
201-3 24.5 9.4 14.0 6.4 14.0 6.4 50.8 30.5 1.5<br />
202-1 19.0 9.4 7.6 3.8 7.6 3.8 50.8 30.5 1.5<br />
202-2 20.0 9.4 12.5 3.8 12.5 3.8 50.8 30.5 1.5<br />
202-3 24.5 9.4 16.0 3.8 16.0 3.8 50.8 30.5 1.5<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″<br />
Standard combinations<br />
Article-No. Type<br />
402-01180 201-1-G<br />
402-01020 201-3-G<br />
402-02004 202-1-G<br />
402-02011 202-2-G<br />
402-02019 202-3-G<br />
2.2<br />
41
2.2<br />
42<br />
Insulation<br />
Bulbous Boots and Transitions<br />
2-Way Outlet <strong>Shapes</strong>, VG style<br />
• Helashrink 200 Series<br />
Branching parts are employed for mechanical<br />
tension relief in cable harnesses. For VG<br />
shapes with port holes ″P″ please refer to<br />
product standards tables in the appendix.<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
ØH<br />
min. a<br />
203-1-G supplied / fully recovered.<br />
ØH<br />
max. b<br />
Sizes and Type Table<br />
ØJ<br />
min. a<br />
ØJ<br />
max. b<br />
b: Fully recovered form (after heating)<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
206-1 VG95343T08C001A 13.0 6.0 7.0 3.0 41.0 19.0 1.5 1.0 19.0<br />
213-1 – 17.3 7.9 11.1 7.9 140.0 83.1 2.3 1.0 64.0<br />
213-2 – 40.0 8.5 31.8 7.9 140.0 83.1 2.3 2.3 64.0<br />
212-1 VG95343T08C005A 14.5 8.0 8.5 5.5 136.0 83.0 2.3 2.0 63.0<br />
203-1 VG95343T08C002A 27.0 12.0 13.0 6.0 80.0 43.0 2.5 1.5 43.0<br />
204-1 VG95343T08C003A 39.0 18.0 27.0 12.0 131.0 81.0 3.1 2.0 81.0<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ - -<br />
HMT200A √ √ √ - -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
JW<br />
nom<br />
S<br />
nom<br />
Standard combinations<br />
Article-No. Type<br />
402-06180 206-1-G<br />
402-13180 213-1-G<br />
402-13021 213-2-G<br />
402-12180 212-1-G<br />
402-03180 203-1-G<br />
402-04180 204-1-G
2-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
• Helashrink 200 Series, in line,<br />
low voltage<br />
Branching parts are used for easy, timesaving<br />
insulation of the branch point of a<br />
cable where it is split into single wires.<br />
Branching parts with hot melt adhesive also<br />
serve to relieve the mechanical tension in<br />
cable harnesses.<br />
!<br />
Cable breakouts are<br />
available for 2, 3, 4, 5<br />
and 6 core cables.<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
223-2 supplied / fully recovered.<br />
a: Expanded form (supplied)<br />
b: Fully recovered form (after heating)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G H B8<br />
W √ √ √ √<br />
W2 √ √ √ √<br />
V9500 √ √ √ -<br />
HMT200A √ √ √ √<br />
W21 - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √<br />
Insulation<br />
Bulbous Boots and Transitions<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
R ±<br />
10%<br />
HW<br />
± 20%<br />
Article-No. Type<br />
402-23058 223-2-B8W<br />
402-16038 216-2-B7WM250<br />
402-17014 217-2-B7<br />
402-18020 218-2-B7<br />
402-20008 220-1-B7<br />
402-19020 219-2-B8<br />
S<br />
JW<br />
± 20%<br />
S<br />
nom<br />
223-2 33.0 9.4 17.5 4.1 94.0 30.0 1.5 1.2 20.0<br />
216-2 28.0 9.4 12.0 2.8 76.5 20.0 1.6 1.6 –<br />
217-2 31.0 15.2 13.0 4.3 99.5 28.5 2.2 2.2 –<br />
218-2 49.0 22.9 20.0 7.6 119.0 34.0 3.2 3.2 –<br />
220-1 50.0 28.0 23.0 8.0 175.0 100.0 2.5 2.0 33.0<br />
219-2 77.0 38.1 37.0 12.7 141.5 42.5 3.8 3.8 44.0<br />
All dimensions in mm. Subject to technical changes.<br />
Standard combinations<br />
2.2<br />
43
2.2<br />
44<br />
Insulation<br />
Bulbous Boots and Transitions<br />
3-Way Outlet <strong>Shapes</strong>, VG style<br />
• Helashrink 300 Series<br />
This style provides cable strain relief and<br />
mechanical protection at harness transition<br />
points, all outlets are clearly marked to aid<br />
orientation on installation.<br />
ØH ØK<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
ØH<br />
min. a<br />
304-1-G supplied / fully recovered.<br />
ØJ<br />
ØL<br />
ØH<br />
max. b<br />
Sizes and Type Table<br />
ØJ/K/L<br />
min. a<br />
ØJ/K/L<br />
max. b<br />
b: Fully recovered form (after heating)<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
W<br />
± 20%<br />
T<br />
± 10%<br />
306-1 VG95343T08D001A 13.0 6.5 6.5 3.5 46.0 25.4 1.3 1.0 20.3<br />
304-1 VG95343T08D002A 27.0 13.5 13.0 7.0 93.0 50.3 2.5 1.5 42.9<br />
310-1 VG95343T08D003A 38.5 19.0 19.0 10.0 135.0 73.7 3.1 1.8 61.0<br />
311-1 VG95343T08D004A 55.5 25.5 27.0 12.5 192.0 103.1 4.6 3.1 88.9<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Standard combinations<br />
Article-No. Type<br />
403-06180 306-1-G<br />
403-04180 304-1-G<br />
403-10180 310-1-G<br />
403-11180 311-1-G
3-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
• Helashrink 300 Series, in line,<br />
low voltage<br />
Branching parts are used for easy, timesaving<br />
insulation of the branch point of a<br />
cable where it is split into single wires.<br />
Branching parts with hot melt adhesive also<br />
serve to relieve the mechanical tension in<br />
cable harnesses.<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
300 Series supplied / fully recovered.<br />
a: Expanded form (supplied)<br />
b: Fully recovered form (after heating)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G H B8 J<br />
W √ √ √ √ √<br />
W2 √ √ √ √ -<br />
WM250 √ √ √ √ √<br />
V9500 √ √ - - √<br />
HMT200A √ √ - √ √<br />
W21 - - √ - √<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Insulation<br />
Bulbous Boots and Transitions<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
S<br />
nom<br />
318-1 23.0 9.1 9.0 3.0 76.5 20.0 2.5 2.5 16.0<br />
339-2 39.0 12.7 17.0 4.1 102.0 56.0 2.9 2.9 26.0<br />
319-1 31.0 17.5 13.0 4.6 93.5 28.5 2.9 2.9 23.0<br />
328-2 44.0 22.8 21.0 7.6 99.0 34.0 3.8 3.8 –<br />
342-1 110.0 35.0 40.0 17.5 230.0 45.0 4.0 3.5 65.0<br />
330-2 61.0 35.5 32.0 12.7 144.5 45.5 3.8 3.8 47.0<br />
340-2 82.0 50.8 36.0 19.1 144.5 45.5 4.5 4.5 65.0<br />
341-1 125.0 59.0 50.8 25.4 283.0 71.0 3.8 3.8 75.0<br />
All dimensions in mm. Subject to technical changes.<br />
Standard combinations<br />
Article-No. Type<br />
403-18018 318-1-G<br />
403-39017 339-2-G<br />
403-19022 319-1-G<br />
403-28015 328-2-J<br />
403-42006 342-1-B8W2<br />
403-30014 330-2-B7WM250<br />
403-41005 341-1-B8W2<br />
2.2<br />
45
2.2<br />
46<br />
Insulation<br />
Bulbous Boots and Transitions<br />
4-Way Outlet <strong>Shapes</strong>, VG style<br />
• Helashrink 400 Series<br />
This style provides cable strain relief and<br />
mechanical protection at harness transition<br />
points, all outlets are clearly marked to aid<br />
orientation on installation.<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
ØH<br />
min. a<br />
403-1-G supplied / fully recovered.<br />
ØH<br />
max. b<br />
Sizes and Type Table<br />
ØJ/K/L/N<br />
min. a<br />
b: Fully recovered form (after heating)<br />
ØJ/K/L/N<br />
max. b<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
S<br />
± 10%<br />
HW<br />
± 20%<br />
411-1 VG95343T08E002A 19.0 10.0 9.5 5.5 36.1 35.6 32.0 1.8 1.0<br />
403-1 VG95343T08E004A 27.0 13.0 13.0 7.0 51.8 49.0 45.0 2.5 1.0<br />
413-1 VG95343T08E005A 38.6 19.0 19.0 10.0 74.9 75.0 65.3 1.8 1.0<br />
All dimensions in mm. Subject to technical changes.<br />
W<br />
± 10%<br />
Combinations ″On request″ Standard combinations<br />
Adhesive Material<br />
Article-No. Type<br />
B7 G H L J<br />
404-11180 411-1-G<br />
WM250 √ √ √ - √<br />
404-03180 403-1-G<br />
W8 √ √ √ - √<br />
404-13180 413-1-G<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ - -<br />
HMT200A √ √ √ - -<br />
W21 - - √ - -<br />
Without<br />
Adhesive<br />
√ √ √ √ √
4-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
• Helashrink 400 Series, in line,<br />
low voltage<br />
Branching parts are used for easy, timesaving<br />
insulation of the branch point of a<br />
cable where it is split into single wires.They<br />
are manufactured from a tough cross-linked<br />
flame retarded polyolefin. Branching parts<br />
with hot melt adhesive also serve to relieve<br />
the mechanical tension in cable harnesses<br />
whilst providing excellent IP ratings.<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
442-1 supplied / fully recovered.<br />
ØH<br />
a: Expanded form (supplied)<br />
b: Fully recovered form (after heating)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G H B8 J<br />
W √ √ √ √ √<br />
W2 √ √ √ √ -<br />
W24 √ √ √ - √<br />
V9500 √ √ - - √<br />
HMT200A √ √ - √ √<br />
W21 - - √ - √<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Insulation<br />
Bulbous Boots and Transitions<br />
ØJ<br />
min. a<br />
ØJ<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
S<br />
JW<br />
± 20%<br />
S<br />
nom<br />
442-1 28.0 9.0 9.0 1.8 78.0 17.0 2.7 2.0 20.0<br />
434-2 23.0 11.0 8.0 2.8 78.0 22.0 1.6 1.6 18.0<br />
443-1 35.0 12.0 15.0 3.0 132.0 26.0 3.0 2.5 22.0<br />
408-2 35.0 12.0 15.0 3.0 95.0 24.0 2.5 2.0 22.0<br />
435-2 32.0 20.3 13.0 4.8 93.5 28.5 2.9 2.9 27.0<br />
409-2 47.4 22.9 21.5 6.4 165.0 38.1 4.1 3.3 38.1<br />
418-4 60.0 22.9 30.0 6.4 202.0 38.1 4.1 3.3 38.1<br />
436-2 45.0 24.9 21.0 7.1 99.0 34.0 4.5 4.5 39.0<br />
437-1 60.0 25.4 26.0 8.9 240.0 48.0 4.5 4.5 43.0<br />
438-2 68.0 35.6 31.0 13.5 141.5 42.5 4.5 4.5 54.0<br />
444-2 35.6 95.0 35.6 12.5 240.0 55.0 4.0 3.5 50.8<br />
All dimensions in mm. Subject to technical changes.<br />
Standard combinations<br />
Article-No. Type<br />
404-42022 442-1-B8W<br />
404-34017 434-2-G<br />
404-43002 443-1-B8<br />
404-08022 408-2-B8W2<br />
404-35007 435-2-J<br />
404-09021 409-2-B8W2<br />
404-18020 418-4-B8W2<br />
404-37001 437-1-B7<br />
404-38008 438-2-J<br />
404-44022 444-2-B8W2<br />
2.2<br />
47
2.2<br />
48<br />
Insulation<br />
Bulbous Boots and Transitions<br />
5-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
• Helashrink 500 Series, in line,<br />
low voltage<br />
Cable breakout boots are designed for insulating<br />
and sealing a cable crotch, or conduit<br />
system, and provide excellent resistance to<br />
abrasion and weathering.<br />
500 Series supplied / fully recovered.<br />
a: Expanded form (supplied)<br />
b: Fully recovered form (after heating)<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G H<br />
W √ √ √<br />
W2 √ √ -<br />
V9500 √ √ √<br />
HMT200A √ √ √<br />
W21 - - √<br />
Without<br />
Adhesive<br />
√ √ √<br />
Sizes and Type Table<br />
ØH ØH ØJ ØJ P R HW JW S<br />
Type min. a max. b min. a max. b ± 10% ± 10% ± 20% ± 20% nom<br />
508-1 60.0 24.5 30.0 7.5 180.0 30.0 3.5 3.0 48.0<br />
All dimensions in mm. Subject to technical changes.<br />
Standard combinations<br />
Article-No. Type<br />
405-08021 508-1-B7<br />
S
6-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
• Helashrink 600 Series, in line,<br />
low voltage<br />
Cable breakout boots are designed for insulating<br />
and sealing a cable crotch, or conduit<br />
system, and provide excellent resistance to<br />
abrasion and weathering.<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
600 Series supplied / fully recovered.<br />
a: Expanded form (supplied)<br />
b: Fully recovered form (after heating)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Insulation<br />
Bulbous Boots and Transitions<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
Combinations ″On request″ Standard combinations<br />
Adhesive Material<br />
Article-No. Type<br />
B7 G H<br />
406-09003 609-1-G<br />
W √ √ √<br />
406-09023 609-2-B7<br />
W2 √ √ -<br />
406-08007 608-1-G<br />
V9500 √ √ -<br />
HMT200A √ √ √<br />
W21 - - √<br />
Without<br />
Adhesive<br />
√ √ √<br />
S<br />
JW<br />
± 20%<br />
S<br />
nom<br />
609-1 30.0 16.0 8.2 4.0 75.0 20.0 2.5 1.5 25.0<br />
609-2 40.0 16.0 12.0 4.0 75.0 20.0 2.5 1.5 25.0<br />
608-1 61.0 36.8 21.0 8.9 152.5 56.5 3.1 3.2 50.0<br />
All dimensions in mm. Subject to technical changes.<br />
2.2<br />
49
2.2<br />
50<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Right Angle <strong>Shapes</strong>, VG style<br />
• Helashrink 1100 Series, with rib<br />
This style provides strain relief for harness<br />
systems when used in conjunction with a<br />
circular grooved adaptor. For VG shapes<br />
with port holes ″P″ please refer to product<br />
standards tables in the appendix.<br />
ØH ØJ<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
1152-4-G recovered onto a connector.<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
1155-4 supplied.<br />
b: Fully recovered form (after heating)<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
Adhesive Material<br />
B7 G J H B8 L<br />
WM250 √ √ √ √ √ -<br />
W8 √ √ √ √ - -<br />
W24 √ √ √ √ - √<br />
V9500 √ √ √ √ - -<br />
HMT200A √ √ √ √ √ -<br />
W21 - - √ √ - -<br />
Without<br />
Adhesive<br />
√ √ √ √ √ √<br />
JW<br />
± 20%<br />
V<br />
± 10%<br />
T<br />
± 20%<br />
1152-4 VG95343T06E001A 24.0 10.5 24.0 6.0 26.0 25.0 1.3 0.5 3.0 1.0 19.0 10.0<br />
1154-4 VG95343T06E002A 30.0 15.5 30.0 6.0 32.0 27.0 1.5 0.8 3.0 1.0 19.0 12.0<br />
1155-4 VG95343T06E003A 31.0 18.0 31.0 7.0 40.0 31.0 1.8 1.0 3.0 1.0 21.0 15.0<br />
1156-4 VG95343T06E004A 36.0 22.5 36.0 8.5 46.0 38.0 1.8 1.0 3.0 1.0 26.0 15.0<br />
1157-4 VG95343T06E005A 43.0 28.5 43.0 10.0 55.0 45.0 2.0 1.0 3.0 1.7 30.0 16.0<br />
1158-4 VG95343T06E006A 60.0 35.0 60.0 16.0 80.0 54.0 3.3 1.5 3.0 1.7 35.0 30.0<br />
1159-4 VG95343T06E007A 66.0 45.0 66.0 17.0 108.0 68.0 3.8 2.0 3.0 2.0 42.0 51.0<br />
1160-4 VG95343T06E008A 82.0 61.0 82.0 25.0 118.0 84.0 4.0 4.0 3.0 2.0 52.0 39.0<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″<br />
M<br />
nom<br />
Standard combinations<br />
Article-No. Type<br />
411-52480 1152-4-G<br />
411-54480 1154-4-G<br />
411-55480 1155-4-G<br />
411-56480 1156-4-G<br />
411-57480 1157-4-G<br />
411-58480 1158-4-G<br />
411-59480 1159-4-G<br />
411-60480 1160-4-G<br />
S<br />
nom
Right Angle <strong>Shapes</strong>, VG style<br />
• Helashrink 1100 Series, without rib,<br />
thick wall<br />
This style provides connector cable strain<br />
relief. Can be installed on the connector<br />
rear thread or plain shaft, allows easy<br />
re-entry for repair when combined with a<br />
hot melt adhesive.<br />
ØH<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
ØH<br />
min. a<br />
1114-1 supplied / fully recovered.<br />
ØH<br />
max. b<br />
ØJ<br />
Sizes and Type Table<br />
ØJ<br />
min. a<br />
ØJ<br />
max. b<br />
Insulation<br />
Bulbous Boots and Transitions<br />
P<br />
±20%<br />
R<br />
± 10%<br />
HW<br />
± 30%<br />
JW<br />
± 30%<br />
1113-1 VG95343T063003A 19.0 14.5 8.0 4.5 39.0 26.0 2.5 1.8 19.0 8.0<br />
1114-1 VG95343T063004A 23.5 18.0 11.5 5.5 51.0 33.0 3.0 1.0 22.0 9.5<br />
1118-1 VG95343T063008A 59.0 45.0 44.0 21.0 133.0 73.0 7.0 5.0 45.0 40.0<br />
All dimensions in mm. Subject to technical changes.<br />
b: Fully recovered form (after heating)<br />
Combinations ″On request″ Standard combinations<br />
Adhesive Material<br />
Article-No. Type<br />
B7 G J H<br />
411-13002 1113-1-G<br />
WM250 √ √ √ √<br />
411-14004 1114-1-G<br />
W8 √ √ √ √<br />
411-18001 1118-1-B7<br />
W24 √ √ √ √<br />
V9500 √ √ √ √<br />
HMT200A √ √ √ √<br />
W21 - - - √<br />
Without<br />
Adhesive<br />
√ √ √ √<br />
M<br />
nom<br />
S<br />
nom<br />
2.2<br />
51
2.2<br />
52<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Right Angle <strong>Shapes</strong>, MIL style<br />
• Helashrink 1100 Series, with rib<br />
This style provides strain relief for harness<br />
systems when used in conjunction with<br />
circular grooved adaptor.<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
1108-4 supplied / fully recovered<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
Sizes and Type Table<br />
R<br />
± 10%<br />
Combinations ″On request″<br />
HW<br />
± 20%<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ - -<br />
HMT200A √ √ √ √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ -<br />
b: Fully recovered form (after heating)<br />
JW<br />
± 30%<br />
V<br />
max<br />
T<br />
± 20%<br />
1181-4 12.0 9.8 6.0 2.0 19.0 13.0 1.0 0.5 1.5 0.6 11.0 6.0<br />
1108-4 16.5 7.9 16.5 2.5 18.3 20.1 1.0 1.6 3.3 1.0 15.2 5.1<br />
1106-4 23.3 10.4 23.3 5.6 20.3 22.9 1.3 1.3 3.3 1.0 15.2 5.8<br />
1107-4 28.4 14.2 28.4 6.3 29.8 28.5 1.5 1.5 3.3 1.0 21.4 7.1<br />
1104-4 30.9 17.8 30.9 7.1 35.6 30.5 1.8 1.8 3.3 1.0 20.6 8.6<br />
1103-4 36.0 22.4 36.0 8.4 43.2 35.6 1.8 1.8 3.3 1.0 22.9 12.7<br />
1101-4 42.6 27.9 42.6 9.7 53.3 43.2 2.0 2.0 3.3 1.7 27.9 15.7<br />
1105-4 51.8 35.1 51.8 15.7 78.7 53.3 3.3 3.3 3.3 1.7 33.0 30.5<br />
All dimensions in mm. Subject to technical changes.<br />
M<br />
nom<br />
Standard combinations<br />
Article-No. Type<br />
411-81480 1181-4-G<br />
411-08015 1108-4-B7<br />
411-06019 1106-4-G<br />
411-07020 1107-4-G<br />
411-04032 1104-4-G<br />
411-03024 1103-4-G<br />
411-01020 1101-4-G<br />
411-05019 1105-4-J<br />
S<br />
nom
Right Angle <strong>Shapes</strong><br />
• Helashrink 1100 Series, without rib<br />
This style provides connector cable strain<br />
relief. Can be installed on the connector<br />
rear thread or plain shaft, allows easy<br />
re-entry for repair when combined with a<br />
hot melt adhesive.<br />
ØH ØJ<br />
a: Expanded form (supplied)<br />
!<br />
For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
Standard combinations<br />
Article-No. Type<br />
411-08002 1108-1-B7<br />
411-08011 1108-2-G<br />
411-06003 1106-1-G<br />
411-06051 1106-2-B7<br />
411-07004 1107-1-G<br />
411-07011 1107-2-G<br />
411-04005 1104-1-G<br />
411-04013 1104-2-G<br />
411-03003 1103-1-G<br />
411-03012 1103-2-G<br />
411-01005 1101-1-G<br />
411-01029 1101-1-GW8<br />
411-05005 1105-1-G<br />
411-05010 1105-2-G<br />
411-09004 1109-1-G<br />
411-00001 1100-4-G<br />
1108-1 supplied / fully recovered.<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Combinations ″On request″<br />
Insulation<br />
Bulbous Boots and Transitions<br />
b: Fully recovered form (after heating)<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 30%<br />
S<br />
nom<br />
M<br />
nom<br />
1108-1 16.5 7.9 16.5 2.5 18.3 20.1 1.0 1.6 5.1 15.2<br />
1108-2 10.6 7.9 8.3 2.5 18.3 20.1 1.0 1.6 5.1 15.2<br />
1106-1 23.6 10.4 23.6 5.6 20.3 22.9 1.3 1.3 5.8 15.2<br />
1106-2 13.7 10.4 11.6 5.6 20.3 22.9 1.3 1.3 5.8 15.2<br />
1107-1 28.4 14.2 28.4 6.3 29.8 28.5 1.5 1.5 7.1 18.5<br />
1107-2 19.3 14.2 14.2 6.3 29.8 28.5 1.5 1.5 7.1 18.5<br />
1104-1 24.1 17.8 15.7 7.1 35.6 30.5 1.8 1.8 8.6 20.6<br />
1104-2 31.7 17.8 31.7 7.1 35.6 30.5 1.8 1.8 8.6 20.6<br />
1103-1 38.1 22.4 38.1 8.4 43.2 35.6 1.8 1.8 12.7 22.9<br />
1103-2 30.4 22.4 19.0 8.4 43.2 35.6 1.8 1.8 12.7 22.9<br />
1101-1 43.1 27.9 43.1 9.7 53.3 43.2 2.0 2.0 15.7 27.9<br />
1101-2 38.1 27.9 22.8 9.7 53.3 43.2 2.0 2.0 15.7 27.9<br />
1105-1 52.3 35.1 52.3 15.7 78.7 53.5 3.3 3.3 30.5 33.0<br />
1105-2 46.9 35.1 35.3 15.7 78.7 53.5 3.3 3.3 30.5 33.0<br />
1109-1 66.0 44.5 66.0 20.3 97.5 66.0 3.8 3.8 40.6 41.7<br />
1100-4 26.0 15.5 16.0 4.0 25.0 17.0 1.8 1.0 20.0 17.0<br />
All dimensions in mm. Subject to technical changes.<br />
2.2<br />
53
2.2<br />
54<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Right Angle <strong>Shapes</strong>,<br />
VG style/MIL style<br />
• Helashrink 1100 Series, with rib,<br />
low profile<br />
This style is typically used on airborne<br />
harnesses to achieve light weight, low<br />
profile, compact strain relief and<br />
mechanical protection.<br />
ØH ØJ<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
ØH<br />
min. a<br />
1123-1-G supplied / fully recovered.<br />
ØH<br />
max. b<br />
Sizes and Type Table<br />
ØJ<br />
min. a<br />
ØJ<br />
max. b<br />
b: Fully recovered form (after heating)<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 30%<br />
T<br />
± 10%<br />
1121-1 VG95343T06F001A 22.0 12.0 22.0 6.5 70.0 19.0 1.5 1.1 1.0 3.0<br />
1122-1 VG95343T06F002A 25.5 15.0 25.0 7.5 79.0 20.0 1.5 1.1 1.0 3.0<br />
1123-1 VG95343T06F003A 29.0 19.0 29.0 8.5 89.0 21.0 1.8 1.1 1.0 3.0<br />
1124-1 VG95343T06F004A 34.0 23.0 34.0 10.0 102.0 22.0 1.8 1.1 1.0 3.0<br />
1125-1 VG95343T06F005A 37.0 30.0 37.0 11.0 108.0 24.0 2.0 1.1 1.7 3.0<br />
1126-1 VG95343T06F006A 43.5 34.0 43.5 12.0 121.0 27.0 2.0 1.1 1.7 3.0<br />
1127-1 VG95343T06F007A 50.0 41.5 50.0 14.5 132.0 30.0 2.3 1.4 1.7 3.0<br />
1128-1 VG95343T06F008A 62.5 47.0 62.5 18.0 133.0 33.0 2.5 1.4 2.0 3.0<br />
1129-1 VG95343T06F009A 69.0 60.0 69.0 20.0 137.0 35.0 2.5 1.4 2.0 3.0<br />
1141-1 VG95343T06F010A 82.0 67.0 82.0 23.0 140.0 45.0 2.5 1.4 2.0 3.0<br />
1121-4 – 22.3 11.4 22.3 6.4 105.2 18.5 1.5 1.1 1.0 3.3<br />
1122-4 – 25.6 15.0 25.6 7.5 124.0 19.8 1.5 1.1 1.0 3.3<br />
1123-4 – 29.4 19.0 29.4 8.5 146.3 20.8 1.8 1.1 1.0 3.3<br />
1124-4 – 34.0 22.9 34.0 10.0 172.2 21.8 1.8 1.1 1.0 3.3<br />
1125-4 – 29.5 37.3 37.3 11.0 185.2 24.4 2.0 1.1 1.7 3.3<br />
1125-2 – 41.2 29.5 41.2 11.0 82.0 24.4 2.0 1.1 1.7 3.3<br />
1126-4 – 43.7 34.0 43.7 12.0 213.6 27.0 2.0 1.1 1.7 3.3<br />
1127-4 – 50.0 41.1 2.3 14.5 224.5 9.5 2.3 1.4 1.7 3.3<br />
1127-3 – 50.0 41.1 2.3 14.5 65.0 29.5 2.3 1.4 1.7 3.3<br />
1128-4 – 62.7 47.0 62.7 18.0 227.3 33.3 2.5 1.4 2.0 3.3<br />
1129-4 – 69.3 59.7 69.3 20.0 233.4 35.1 2.5 1.4 2.0 3.3<br />
All dimensions in mm. Subject to technical changes.<br />
V<br />
± 10%
Right Angle <strong>Shapes</strong>,<br />
VG style/MIL style<br />
• Helashrink 1100 Series, with rib,<br />
low profile<br />
1123-1-G supplied / fully recovered.<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
!<br />
For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Standard combinations<br />
Article-No. Type<br />
411-21180 1121-1-G<br />
411-22180 1122-1-G<br />
411-23180 1123-1-G<br />
411-24180 1124-1-G<br />
411-25180 1125-1-G<br />
411-26180 1126-1-G<br />
411-27180 1127-1-G<br />
411-28180 1128-1-G<br />
411-29180 1129-1-G<br />
411-41180 1141-1-G<br />
411-21007 1121-4-G<br />
411-22015 1122-4-G<br />
411-23013 1123-4-G<br />
411-24009 1124-4-G<br />
411-25008 1125-4-G<br />
411-25027 1125-2-G<br />
411-26008 1126-4-G<br />
411-27008 1127-4-G<br />
411-27005 1127-3-B7<br />
411-28002 1128-4-G<br />
411-29001 1129-4-J<br />
2.2<br />
55
2.2<br />
56<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Right Angle <strong>Shapes</strong>, VG style<br />
• Helashrink 1100 Series, with rib,<br />
low profile, high ratio<br />
This style provides connector cable strain<br />
relief. Used in applications for partially loaded<br />
connectors with small cable diameters.The<br />
tail is designed to allow easy orientation<br />
prior to cooling.<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
ØH<br />
min. a<br />
1135-1-G supplied / fully recovered.<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
Combinations ″On request″<br />
b: Fully recovered form (after heating)<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
JO<br />
± 10%<br />
V<br />
± 10%<br />
1133-1 VG95343T06F011A 19.0 13.0 6.0 2.0 44.0 16.3 1.5 1.1 21.8 3.0 1.0<br />
1133-2 – 19.0 13.0 6.0 2.0 30.0 16.0 1.5 1.1 1.0 3.3 1.0<br />
1134-1 VG95343T18H001A 26.0 19.0 7.5 2.5 67.0 18.0 1.8 1.1 29.2 3.0 1.0<br />
1135-1 VG95343T06F013A 34.0 26.0 9.5 3.0 81.0 18.8 1.8 1.1 35.3 3.0 1.0<br />
1135-1 VG95343T06F013A 34.0 26.0 9.5 3.0 81.0 18.8 1.8 1.1 35.3 3.0 1.0<br />
1136-1 VG95343T06F014A 43.5 34.0 11.5 3.5 116.0 21.3 1.8 1.1 47.0 3.0 1.7<br />
1182-4 – 12.0 7.6 6.0 2.0 16.8 13.0 1.0 0.5 6.0 1.5 0.3<br />
All dimensions in mm. Subject to technical changes.<br />
Standard combinations<br />
Article-No. Type<br />
411-33180 1133-1-G<br />
411-33011 1133-2-G<br />
411-34180 1134-1-G<br />
411-35180 1135-1-G<br />
411-35180 1135-1-G<br />
411-36180 1136-1-G<br />
411-82001 1182-4-G<br />
T<br />
± 20%
T-<strong>Shapes</strong>, VG style<br />
• Helashrink 1200 Series<br />
This style provides strain relief, sealing and<br />
mechanical protection on cable harnesses.<br />
For VG shapes with port holes ″P″ please<br />
refer to product standards tables in the<br />
appendix.<br />
ØH<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
!<br />
For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
ØK<br />
ØH/J<br />
min. a<br />
ØH/J<br />
max. b<br />
Sizes and Type Table<br />
ØK<br />
min. a<br />
ØK<br />
max. b<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Insulation<br />
Bulbous Boots and Transitions<br />
b: Fully recovered form (after heating)<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
S<br />
± 10%<br />
1206-1 VG95343T08A009A 6.6 3.0 6.6 3.0 29.7 14.7 1.0 1.0 14.7 1.0<br />
1203-1 VG95343T08A001A 13.2 6.0 6.5 3.0 52.0 26.0 1.5 1.5 19.3 1.0<br />
1202-1 VG95343T08A010A 13.2 6.1 13.2 6.1 58.7 29.2 1.5 1.5 29.2 1.5<br />
1205-1 – 17.7 8.9 7.6 3.8 50.8 25.4 1.5 1.5 25.4 1.0<br />
1201-1 VG95343T08A007A 17.7 8.9 10.1 5.1 47.5 23.6 1.5 1.5 23.6 1.0<br />
1209-1 VG95343T08A002A 27.0 12.4 13.2 6.0 108.0 54.0 2.5 2.5 38.6 1.5<br />
1207-1 VG95343T08A011A 26.9 12.4 26.9 12.4 120.1 55.9 2.5 2.5 59.9 2.5<br />
1203-1 – 13.0 6.0 6.5 3.0 52.0 26.0 1.5 1.5 19.3 1.0<br />
All dimensions in mm. Subject to technical changes.<br />
1202-1-G recovered onto a cable harness.<br />
ØJ<br />
Combinations ″On request″<br />
Standard combinations<br />
Article-No. Type<br />
412-06180 1206-1-G<br />
412-03180 1203-1-G<br />
412-02180 1202-1-G<br />
412-05180 1205-1-G<br />
412-01180 1201-1-G<br />
412-09180 1209-1-G<br />
412-07180 1207-1-G<br />
412-03001 1203-1-B7<br />
KW<br />
± 20%<br />
2.2<br />
57
2.2<br />
58<br />
Insulation<br />
Bulbous Boots and Transitions<br />
T-<strong>Shapes</strong><br />
• Helashrink 1200 Series, Offset<br />
This style provides strain relief, sealing<br />
and mechanical protection where a cable<br />
transition is required on the harness, it is<br />
recommended that an adhesive be used if<br />
enviromental sealing is required.<br />
ØH<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
1217-1 supplied / fully recovered.<br />
ØJ<br />
max. b<br />
ØJ<br />
ØK<br />
Sizes and Type Table<br />
ØK<br />
min. a<br />
ØK<br />
max. b<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
b: Fully recovered form (after heating)<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
1217-1 10.0 2.6 6.0 2.2 6.0 2.6 57.0 19.0 1.0 1.0 1.0<br />
1222-1 31.0 15.2 18.0 8.9 25.0 15.0 92.0 52.0 2.3 1.8 2.3<br />
1223-1 29.5 16.3 9.6 5.3 29.5 16.3 93.2 56.6 2.5 1.8 2.5<br />
All dimensions in mm. Subject to technical changes.<br />
Standard combinations<br />
Article-No. Type<br />
412-17003 1217-1-G<br />
412-22002 1222-1-G<br />
412-23003 1223-1-HP<br />
KW<br />
± 20%
T-<strong>Shapes</strong>, VG style<br />
• Helashrink 1200 Series, Offset<br />
This style provides strain relief, sealing<br />
and mechanical protection where a cable<br />
transition is required on the harness, it is<br />
recommended that an adhesive be used if<br />
enviromental sealing is required.<br />
a: Expanded form (supplied)<br />
Type<br />
Designation as per<br />
VG-Norm<br />
!<br />
For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
ØK<br />
min. a<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 - - - √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Insulation<br />
Bulbous Boots and Transitions<br />
ØK<br />
max. b<br />
b: Fully recovered form (after heating)<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
KW<br />
± 20%<br />
S<br />
± 10%<br />
1204-1 VG95343T08A016A 13.0 7.5 6.5 4.0 6.5 4.0 56.0 33.0 1.5 1.0 1.0 – 27.0<br />
1216-1 VG95343T08A017A 33.0 13.0 16.5 6.5 16.5 6.5 97.0 54.0 2.5 1.5 1.5 38.5 –<br />
1226-1 – 30.5 15.2 17.8 8.9 17.8 8.9 81.3 47.5 2.3 1.3 1.3 38.1 –<br />
All dimensions in mm. Subject to technical changes.<br />
1204-1 supplied / fully recovered.<br />
Combinations ″On request″ Standard combinations<br />
Article-No. Type<br />
412-04180 1204-1-G<br />
412-16180 1216-1-G<br />
412-26002 1226-1-G<br />
F<br />
± 15%<br />
2.2<br />
59
2.2<br />
60<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Angled T-<strong>Shapes</strong>, VG style<br />
• Helashrink 1300 Series, 30° & 45° angle<br />
This style provides strain relief, sealing and<br />
mechanical protection on cable harnesses.<br />
For VG shapes with port holes ″P″ please<br />
refer to product standards tables in the<br />
appendix.<br />
ØH<br />
a: Expanded form (supplied)<br />
Type Angle<br />
Designation as per<br />
VG-Norm<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Sizes and Type Table<br />
ØJ<br />
min. a<br />
ØJ<br />
max. b<br />
b: Fully recovered form (after heating)<br />
ØK<br />
min. a<br />
ØK<br />
max. b<br />
1301-1 45° VG 95343 T08 B 001 A 13.0 7.0 13.0 7.0 7.0 3.5 50.0 23.0 1.5 1.5 1.0 23.0<br />
1302-1 45° VG 95343 T08 B 004 A 27.0 13.0 27.0 13.0 7.0 3.5 93.0 41.0 2.5 2.5 1.0 36.0<br />
1303-1 45° VG 95343 T08 B 002 A 27.0 14.0 27.0 14.0 13.0 7.5 145.0 70.0 1.5 1.5 1.5 54.0<br />
1311-1 30° – 30.4 15.0 30.4 15.0 20.3 10.0 82.6 32.0 2.5 2.5 1.8 51.0<br />
1306-1 45° VG95343T06B010A 13.0 6.0 6.5 3.0 6.5 3.0 45.0 23.0 1.5 1.0 1.5 21.5<br />
1307-1 45° VG95343T19B011A 27.0 12.5 13.0 6.0 13.0 6.0 90.0 42.0 2.5 1.5 1.5 43.0<br />
All dimensions in mm. Subject to technical changes.<br />
1303-1-G supplied / fully recovered.<br />
ØK<br />
ØJ<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 √ √ √ √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
P ±<br />
10%<br />
R ±<br />
10%<br />
HW ±<br />
30%<br />
JW ±<br />
30%<br />
KW ±<br />
20%<br />
Standard combinations<br />
Article-No. Type<br />
413-01180 1301-1-G<br />
413-02180 1302-1-G<br />
413-03180 1303-1-G<br />
413-11010 1311-1-G<br />
413-06180 1306-1-G<br />
413-07184 1307-1-GW24<br />
S ±<br />
10%
Double T-<strong>Shapes</strong><br />
• Helashrink 1310 Series, 30° angle<br />
This style provides strain relief, sealing and<br />
mechanical protection on cable harnesses<br />
where a specialised orientation is required.<br />
ØK ØL<br />
ØH ØJ<br />
a: Expanded form (supplied)<br />
!<br />
For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
Sizes and Type Table<br />
Insulation<br />
Bulbous Boots and Transitions<br />
b: Fully recovered form (after heating)<br />
ØH ØH ØJ ØJ ØK ØK ØL ØL P R HW JW KW LW S T<br />
Type min. a max. b min. a max. b min. a max. b min. a max. b ± 10% ± 10% ± 20% ± 20% ± 20% ± 20% ± 10% ± 10%<br />
1310-1 30.4 15.2 30.4 15.2 12.7 6.4 12.7 6.4 88.9 50.8 2.5 2.5 1.3 1.3 25.4 19.1<br />
All dimensions in mm. Subject to technical changes.<br />
1310-1 supplied / fully recovered.<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Standard combinations<br />
Article-No. Type<br />
413-10003 1310-1-G<br />
2.2<br />
61
2.2<br />
62<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Angle Elbow <strong>Shapes</strong><br />
• Helashrink 1400 Series, 90° angle<br />
This style provides strain relief and mechanical<br />
protection on cable orientations of up to 90°,<br />
efficient design and numerous material /<br />
adhesive combinations provide quick and easy<br />
installation across a range of applications.<br />
ØH ØJ<br />
a: Expanded form (supplied)<br />
1403-1 supplied / fully recovered.<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 √ √ √ √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
b: Fully recovered form (after heating)<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
1401-1 31.7 15.7 31.7 15.7 88.9 50.8 2.3 2.3<br />
1401-2 38.1 15.7 38.1 15.7 88.9 50.8 2.3 2.3<br />
1403-1 15.7 7.9 15.7 7.9 44.5 25.4 2.3 2.3<br />
1405-1 25.0 7.9 25.0 7.9 30.0 15.0 1.5 1.5<br />
1406-1 20.0 7.9 20.0 7.9 45.0 15.0 1.5 1.5<br />
1408-2 19.0 9.0 19.0 9.0 44.5 44.5 1.8 1.8<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″<br />
Standard combinations<br />
Article-No. Type<br />
414-01003 1401-1-G<br />
414-01006 1401-2-G<br />
414-03002 1403-1-G<br />
414-05003 1405-1-G<br />
414-06003 1406-1-G<br />
414-08004 1408-2-G
Connector Cover<br />
for Min-D Series<br />
• Helashrink 1500 Series, with top entry<br />
This style provides strain relief and mechanical<br />
protection for Min-D series connectors. It’s<br />
unique design allows perfect orientation on<br />
installation, can be supplied with or without<br />
lips.<br />
ØK<br />
a: Expanded form (supplied)<br />
W<br />
ØK<br />
P<br />
b: Fully recovered form (after heating)<br />
!For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
Combinations ″On request″<br />
R<br />
Adhesive Material<br />
B7 G J H<br />
WM250 √ √ √ √<br />
W8 √ √ √ √<br />
W24 √ √ √ √<br />
V9500 √ √ √ √<br />
HMT200A √ √ √ √<br />
W21 - - - √<br />
Without<br />
Adhesive<br />
√ √ √ √<br />
ØJ<br />
ØJ<br />
ØH<br />
ØH<br />
1505-1 supplied / fully recovered.<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Insulation<br />
Bulbous Boots and Transitions<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
ØK<br />
min. a<br />
ØK<br />
max. b<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
W<br />
± 20%<br />
1505-1 20.3 20.3 10.7 10.7 7.8 4.1 33.0 19.1 1.0<br />
1505-2 16.0 20.3 16 10.7 16.0 4.1 33.0 19.1 1.0<br />
1505-7 20.3 20.3 15.0 10.7 2.0 4.1 48.0 19.1 1.0<br />
1505-7 20.3 20.3 15.0 10.7 2.0 4.1 48.0 19.1 1.0<br />
1506-1 28.1 28.2 10.7 10.7 10.1 5.3 38.9 22.1 1.0<br />
1506-2 19.0 28.2 19.0 10.7 19.0 5.3 38.9 22.1 1.0<br />
1507-1 42.1 42.2 10.7 10.7 13.9 8.1 45.0 25.4 1.0<br />
1507-2 29.2 42.2 29.2 10.7 29.2 8.1 45.0 25.4 1.0<br />
1507-7 55.0 42.2 13.9 10.7 25.0 8.1 45.0 25.4 1.0<br />
1501-1 58.4 58.7 10.6 10.7 17.2 8.6 53.3 28.4 1.0<br />
1501-2 34.2 58.7 34.2 10.7 34.2 8.6 53.3 28.4 1.0<br />
1502-1 37.5 57.9 37.5 13.7 37.5 10.4 61.0 31.8 1.0<br />
1502-2 57.9 57.9 13.7 3.7 19.0 10.4 61.0 31.8 1.0<br />
All dimensions in mm. Subject to technical changes.<br />
These types are with lips.<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Standard combinations<br />
with lips<br />
Article-No. Type<br />
415-05004 1505-1-G<br />
415-05011 1505-2-B7<br />
415-05021 1505-7-J<br />
415-05020 1505-7-GW8<br />
415-06005 1506-1-G<br />
415-06012 1506-2-B7<br />
415-07005 1507-1-G<br />
415-07013 1507-2-B7<br />
415-07024 1507-7-G<br />
415-01001 1501-1-B7<br />
415-01010 1501-2-G<br />
415-02005 1502-1-J<br />
415-02009 1502-2-G<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
ØK<br />
min. a<br />
ØK<br />
max. b<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
W<br />
± 20%<br />
1505-3 21.0 20.3 12.4 10.7 7.8 4.1 33.0 19.1 1.0<br />
1507-3 42.1 42.2 10.7 10.7 13.9 8.1 45.0 25.4 1.0<br />
1501-3 59.6 58.7 12.4 10.7 17.2 8.6 53.3 28.4 1.0<br />
1501-7 58.4 58.7 10.6 10.7 17.2 8.6 53.3 28.4 1.0<br />
1502-3 57.4 57.9 13.7 13.7 19.0 10.4 61.0 31.8 1.0<br />
All dimensions in mm. Subject to technical changes.<br />
These types are without lips.<br />
Standard combinations<br />
without lips<br />
Article-No. Type<br />
415-05015 1505-3-B7<br />
415-07030 1507-3-G<br />
415-01016 1501-3-J<br />
415-01017 1501-7-B7<br />
415-02020 1502-3-J<br />
2.2<br />
63
2.2<br />
64<br />
Insulation<br />
Bulbous Boots and Transitions<br />
GSR Graduated Strain Relief<br />
• Helashrink 1750 Series, with rib<br />
This style is ideally suited for shipboard and<br />
railway carriage cabling. The key features<br />
are: very robust, superior crush resistance<br />
and excellent strain relief. The wall thickness<br />
varies with long tail, allowing setting at<br />
varying angles through 90°.<br />
ØH<br />
a: Expanded form (supplied)<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
ØJ<br />
max. b<br />
Sizes and Type Table<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
b: Fully recovered form (after heating)<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
T<br />
± 10%<br />
1751-1 25.4 16.5 25.4 8.3 152.4 30.5 4.1 1.5 1.5 3.0<br />
1751-2 33.0 16.5 33.0 8.4 153.0 30.5 4.1 1.5 1.5 3.0<br />
1752-1 33.1 20.3 33.1 10.9 152.4 30.5 4.1 1.5 1.5 3.0<br />
1752-2 43.2 20.3 43.2 10.9 153.0 30.5 4.1 1.5 1.5 3.0<br />
1753-1 43.2 22.8 43.2 14.2 175.3 38.1 4.1 2.0 1.5 3.0<br />
1753-2 53.3 22.9 53.3 14.2 175.3 38.0 4.1 2.0 1.5 3.0<br />
1754-1 53.4 27.9 53.4 17.7 175.3 38.1 4.1 2.0 1.5 3.0<br />
1754-2 72.4 27.9 72.4 17.8 175.3 38.0 4.1 2.0 1.5 3.0<br />
1755-1 72.4 36.8 72.4 24.1 182.9 40.6 4.1 2.5 1.5 3.0<br />
1755-2 87.0 36.8 87.0 24.1 184.0 41.0 4.1 2.5 1.5 3.0<br />
All dimensions in mm. Subject to technical changes.<br />
1751-1 supplied / fully recovered.<br />
ØJ<br />
Combinations ″On request″<br />
Adhesive Material<br />
B7 G J H<br />
WM250 √ √ √ √<br />
W8 √ √ √ √<br />
W24 √ √ √ √<br />
V9500 √ √ √ √<br />
HMT200A √ √ √ √<br />
W21 - - - √<br />
Without<br />
Adhesive<br />
√ √ √ √<br />
Standard combinations<br />
Article-No. Type<br />
417-51001 1751-1-H<br />
417-51009 1751-2-H<br />
417-52001 1752-1-H<br />
417-52005 1752-2-H<br />
417-53001 1753-1-H<br />
417-53005 1753-2-H<br />
417-54001 1754-1-H<br />
417-54005 1754-2-H<br />
417-55001 1755-1-H<br />
417-55005 1755-2-H<br />
V<br />
± 10%
Angle <strong>Shapes</strong><br />
• Helashrink 1800 Series, with rib,<br />
30°, 45°, 60° angle<br />
This style provides strain relief and mechanical<br />
protection for harness systems when used<br />
in conjunction with a circular grooved<br />
adaptor. Can be supplied in a range of<br />
nominal recovered angles and material /<br />
adhesive combinations to suit most<br />
applications.<br />
ØH ØJ<br />
a: Expanded form (supplied)<br />
Type Angle<br />
ØH<br />
min. a<br />
!<br />
For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
Insulation<br />
Bulbous Boots and Transitions<br />
b: Fully recovered form (after heating)<br />
P<br />
± 10%<br />
R<br />
± 10%<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 √ √ √ √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
HW<br />
± 20%<br />
JW<br />
± 20%<br />
T<br />
± 10%<br />
1820-4 30° 36.0 21.4 36.0 8.3 46.0 26.0 1.8 1.0 8.6 26.0<br />
1807-4 45° 35.6 18.0 35.6 7.4 43.2 10.2 1.8 1.8 1.0 3.0<br />
1805-4 45° 40.0 18.8 40.0 7.0 28.0 11.0 1.5 1.5 1.0 3.0<br />
1806-4 45° 42.6 27.9 42.6 9.7 85.0 17.8 2.0 2.0 1.7 3.0<br />
1821-42 45° 20.0 14.2 20.0 4.1 24.0 10.0 2.3 1.8 1.1 3.0<br />
1819-4 60° 43.0 28.2 43.0 9.9 55.0 18.0 2.0 1.0 3.0 18.0<br />
All dimensions in mm. Subject to technical changes.<br />
1821-42 supplied / fully recovered.<br />
Combinations ″On request″<br />
Standard combinations<br />
Article-No. Type<br />
418-20001 1820-4-G<br />
418-07003 1807-4-G<br />
418-05003 1805-4-G<br />
418-06002 1806-4-G<br />
418-21013 1821-42-G<br />
418-19001 1819-4-G<br />
S<br />
± 10%<br />
2.2<br />
65
2.2<br />
66<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Right Angle Cross <strong>Shapes</strong><br />
• Helashrink 2000 Series, T-Joint<br />
This style allows wires to be routed in four<br />
90° directions, whilst providing strain relief<br />
and mechanical protection. Environmental<br />
sealing can be achieved when used in conjunction<br />
with one of our extensive range of<br />
adhesives.<br />
ØJ<br />
a: Expanded form (supplied)<br />
ØH<br />
2003-1 supplied / fully recovered.<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Adhesive Material<br />
B7 G J H<br />
WM250 √ √ √ √<br />
W8 √ √ √ √<br />
W24 √ √ √ √<br />
V9500 √ √ √ √<br />
HMT200A √ √ √ √<br />
W21 - - - √<br />
Without<br />
Adhesive<br />
√ √ √ √<br />
b: Fully recovered form (after heating)<br />
ØJ<br />
min. a<br />
Sizes and Type Table<br />
ØJ<br />
max. b<br />
R<br />
± 10%<br />
P<br />
± 10%<br />
S<br />
± 10%<br />
W<br />
± 20%<br />
2003-1 19.3 9.7 13.2 9.7 38.1 38.1 22.1 1.1<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″<br />
Standard combinations<br />
Article-No. Type<br />
420-03002 2003-1-G
Locating Bushes<br />
• Helashrink 1760, 1790, 1820 Series<br />
This product style provides location,<br />
cushioning, shimming and protection on cable<br />
runs through bulk head or enclosure entry<br />
points. Available in a range of materials and<br />
adhesives for most applications.<br />
a: Expanded form (supplied)<br />
!<br />
For Material / Adhesive<br />
selection and other<br />
information please<br />
refer to page 10.<br />
1793-1 supplied / fully recovered.<br />
Type<br />
ØH<br />
ØH<br />
min. a<br />
ØH<br />
max. b<br />
Adhesive Material<br />
B7 G J H L<br />
WM250 √ √ √ √ -<br />
W8 √ √ √ √ -<br />
W24 √ √ √ √ √<br />
V9500 √ √ √ √ -<br />
HMT200A √ √ √ √ -<br />
W21 √ √ √ √ -<br />
Without<br />
Adhesive<br />
√ √ √ √ √<br />
Insulation<br />
Bulbous Boots and Transitions<br />
b: Fully recovered form (after heating)<br />
Sizes and Type Table<br />
R<br />
± 10%<br />
P<br />
± 10%<br />
HW<br />
± 20%<br />
V<br />
± 10%<br />
Standard combinations<br />
Article-No. Type<br />
417-93001 1793-1-G<br />
417-94002 1794-1-L<br />
417-95001 1795-1-G<br />
417-96001 1796-1-G<br />
418-22001 1822-1-G<br />
418-23001 1823-1-G<br />
U<br />
± 20%<br />
1793-1 20.0 9.5 25.0 35.0 1.5 5.0 3.0<br />
1794-1 30.0 18.0 25.0 35.0 2.0 5.0 3.0<br />
1795-1 26.0 12.7 25.0 35.0 2.0 5.0 3.0<br />
1796-1 15.0 6.4 24.0 29.0 1.5 2.5 2.0<br />
1822-1 12.0 5.9 24.0 30.0 6.1 3.0 2.0<br />
1823-1 16.0 7.8 24.0 32.0 6.2 4.0 2.0<br />
All dimensions in mm. Subject to technical changes.<br />
Combinations ″On request″<br />
2.2<br />
67
2.2<br />
68<br />
Insulation<br />
Bulbous Boots and Transitions<br />
Connector Cover for Min-D Series<br />
• Helashrink 2100 Series, with 90° entry<br />
This style provides strain relief and mechanical<br />
protection for Min-D series connectors. Its<br />
unique design allows perfect 90° orientation<br />
on installation. It can be supplied with or with -<br />
out lips in a range of material and adhesive<br />
combinations to suit most applications.<br />
ØJ<br />
Type<br />
ØH<br />
min. a<br />
ØH<br />
a: Expanded form (supplied)<br />
ØH<br />
max. b<br />
ØJ<br />
min. a<br />
Adhesive Material<br />
B7 G J H<br />
WM250 √ √ √ √<br />
W8 √ √ √ √<br />
W24 √ √ √ √<br />
V9500 √ √ √ √<br />
HMT200A √ √ √ √<br />
W21 - - - √<br />
Without<br />
Adhesive<br />
√ √ √ √<br />
ØJ<br />
max. b<br />
ØK<br />
min. a<br />
Sizes and Type Table<br />
ØK<br />
max. b<br />
R<br />
± 10%<br />
W<br />
± 20%<br />
V<br />
± 10%<br />
S<br />
± 10%<br />
X<br />
± 10%<br />
Article-No. Type<br />
421-03019 2103-3-J<br />
Y<br />
± 10%<br />
2101-1 20.3 20.3 10.7 10.7 7.8 4.1 21.6 1.0 15.0 15.2 3.0 3.0 1.1<br />
2101-2 16.0 20.3 10.0 16.0 16.0 4.1 21.6 1.0 15.0 15.2 3.0 3.0 1.1<br />
2102-1 28.1 28.2 10.6 10.7 10.1 5.3 24.6 1.0 15.0 18.5 3.0 3.0 1.1<br />
2102-2 19.0 28.2 19.0 10.7 19.0 5.3 24.6 1.0 15.0 18.5 3.0 3.0 1.1<br />
2103-1 42.1 42.2 10.6 10.7 13.9 7.4 27.9 1.1 15.0 22.1 3.0 3.0 1.1<br />
2103-2 29.2 42.2 29.2 10.7 29.2 7.4 27.9 1.1 15.0 22.1 3.0 3.0 1.1<br />
2104-1 58.6 58.7 10.6 10.7 17.2 8.6 30.5 1.0 15.0 25.4 3.0 3.0 1.1<br />
2105-1 57.9 57.9 13.7 13.7 19.0 10.7 32.3 1.0 15.0 25.4 3.0 3.0 1.1<br />
2105-2 37.5 57.9 37.5 13.7 37.5 10.7 32.3 1.0 15.0 25.4 3.0 3.0 1.1<br />
All dimensions in mm. Subject to technical changes.<br />
These are with lips.<br />
2101-1 supplied / fully recovered.<br />
Sizes and Type Table<br />
Standard combinations<br />
with lips<br />
Article-No. Type<br />
421-01004 2101-1-G<br />
421-01010 2101-2-G<br />
421-02004 2102-1-G<br />
421-02009 2102-2-B7<br />
421-03004 2103-1-G<br />
421-03014 2103-2-G<br />
421-04005 2104-1-G<br />
421-05003 2105-1-G<br />
421-05010 2105-2-J<br />
Standard combinations<br />
without lips<br />
Z<br />
± 10%<br />
ØH ØH ØJ ØJ ØK ØK R W V S X Y Z<br />
Type min. a max. b min. a max. b min. a max. b ± 10% ± 20% ± 10% ± 10% ± 10% ± 10% ± 10%<br />
2103-3 42.9 42.2 12.4 10.7 13.9 7.4 27.9 1.1 15.0 22.1 – – –<br />
All dimensions in mm. Subject to technical changes.<br />
These are without lips.<br />
Combinations ″On request″<br />
ØK<br />
ØJ<br />
ØH<br />
b: Fully recovered form (after heating)<br />
ØK<br />
W S<br />
R<br />
Y<br />
V<br />
X<br />
Z
3<br />
Cable Management Products<br />
Page<br />
3.1 Breakout Boots and End Caps<br />
2-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 200 Series, in line, low voltage 70<br />
3-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 300 Series, in line, low voltage 71<br />
4-Way Outlet <strong>Shapes</strong>, Breakout Boots<br />
• Helashrink 400 Series, in line, low voltage 72<br />
End Caps<br />
• Helashrink 1600 Series, low voltage 73<br />
Pinched End Caps<br />
• Helashrink PEC Series, low voltage 74<br />
3.2 <strong>Heat</strong> <strong>Shrinkable</strong> Tubing<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing 2:1 - Fluororubber<br />
• Viton®-E 75<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing 2:1 - Elastomer<br />
• SE28 76<br />
• TE28 - light weight 77<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing up to 4:1 - 1 m lengths<br />
• MU47 - medium wall unlined 78<br />
• MA47 - medium wall adhesive lined<br />
3.3 Adaptor Springs<br />
Constant Force Spring Adaptor<br />
• Zetalok 79<br />
3.4 Adhesives<br />
Two-component Adhesive for <strong>Heat</strong> <strong>Shrinkable</strong> Tubing and <strong>Shapes</strong><br />
• V9500 Dosing Gun 80<br />
Hot Melt Tape for <strong>Heat</strong> <strong>Shrinkable</strong> Tubing and <strong>Shapes</strong><br />
• HMT200A 81<br />
High Temperature Hot Melt Adhesive Tape for Low Profile Products<br />
• TSA 200 82
3.1<br />
!<br />
Cable breakouts are<br />
available for 2, 3, 4, 5<br />
and 6 core cables.<br />
70<br />
Insulation<br />
Breakout Boots and Endcaps<br />
2-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
• Helashrink 200 Series, in line, low voltage<br />
Features and Benefits<br />
Branching parts are used for easy, timesaving<br />
insulation of the branch point of a<br />
cable where it is split into single wires.<br />
Branching parts with adhesive also serve<br />
to relieve the mechanical tension in cable<br />
harnesses whilst providing excellent<br />
IP ratings.<br />
Recomm. application<br />
(mm²)<br />
Breakout boot for two-core cable.<br />
a: Expanded form (supplied)<br />
Material Polyolefin, chemically cross linked (POX)<br />
Colour Black (BK)<br />
Shrink Ratio up to 3:1<br />
Dielectric Strength 15 kV/mm<br />
Min. Shrink Temperature +135 °C<br />
Operating Temperature -55 °C to +100 °C<br />
Flammability ASTM D635<br />
Recovered<br />
ØH ØH ØJ ØJ P R S HW JW<br />
Article-No. Type from to min. a max. b min. a max. b ± 10% ± 10% nom ± 20% ± 20%<br />
402-16039 216-3-B8W 2.5 10.0 21.0 9.4 9.0 2.79 76.5 20.0 4.0 1.59 1.59<br />
402-23058 223-2-B8W 4.0 35.0 33.0 9.4 17.5 4.1 94.0 30.0 20.0 1.5 1.2<br />
402-18051 218-2-B8W 50.0 150.0 49.0 22.9 20.0 7.6 119.0 34.0 30.0 3.2 3.2<br />
402-19032 219-2-B8W 185 400 87.0 38.1 43.0 12.7 141.5 42.5 44.0 3.8 3.8<br />
All Dimensions in mm, except for ″mm²″. Subject to technical changes.<br />
b: Fully recovered form (after heating)<br />
Material Data<br />
S<br />
�
3-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
• Helashrink 300 Series, in line, low voltage<br />
Features and Benefits<br />
Cable breakout boots are designed for<br />
insulating and sealing of cable crutches and<br />
provide excellent resistance from abrasion<br />
and weathering. They are manufactured<br />
from a tough cross-linked flame retarded<br />
polyolefin, Branching parts with adhesive<br />
also serve to relieve the mechanical tension<br />
in cable harnesses whilst providing excellent<br />
IP ratings.<br />
!<br />
Cable breakouts are<br />
available for 2, 3, 4, 5<br />
and 6 core cables.<br />
Technical Table<br />
Recomm. application<br />
(mm²)<br />
300 Series supplied / fully recovered.<br />
a: Expanded form (supplied)<br />
Insulation<br />
Breakout Boots and Endcaps<br />
Recovered<br />
ØH ØH ØJ ØJ P R S HW JW<br />
Article-No. Type from to min. a max. b min. a max. b ± 10% ± 10% nom ± 20% ± 20%<br />
403-54004 354-1-B8W 16.0 45.0 45.0 10.0 16.0 4.0 100.0 25.0 – 3.0 2.0<br />
403-20012 320-1-B8W 50.0 150.0 55.8 22.5 30.4 9.0 180.0 44.0 37.0 3.0 2.0<br />
403-55005 355-1-B8W 150 240 100.0 28.0 40.0 13.0 210 50.0 – 3.5 2.5<br />
403-24016 324-1-B8W 150 300.0 90.0 35.5 35.0 14.5 200.0 50.0 54.0 3.0 2.0<br />
403-42006 342-1-B8W2 185 400 110.0 35.0 40.0 17.5 230.0 45.0 65.0 4.0 3.5<br />
403-41005 341-1-B8W2 240 400.0 125.0 59.0 50.8 25.4 283.0 71.0 – 3.8 3.8<br />
All Dimensions in mm, except for ″mm²″. Subject to technical changes.<br />
b: Fully recovered form (after heating)<br />
Material Data<br />
Material Polyolefin, chemically cross linked (POX)<br />
Colour Black (BK)<br />
Shrink Ratio up to 3:1<br />
Dielectric Strength 15 kV/mm<br />
Min. Shrink Temperature +135 °C<br />
Operating Temperature -55 °C to +100 °C<br />
Flammability ASTM D635<br />
�<br />
S<br />
3.1<br />
71
3.1<br />
72<br />
Insulation<br />
Breakout Boots and Endcaps<br />
4-Way Outlet <strong>Shapes</strong>,<br />
Breakout Boots<br />
• Helashrink 400 Series, in line, low voltage<br />
Features and Benefits<br />
Branching parts are used for easy, time-<br />
saving insulation of the branch point of a<br />
cable where it is split into single wires. They<br />
are manufactured from a tough cross-linked<br />
flame retarded polyolefin, branching parts<br />
with hot melt adhesive also serve to relieve<br />
the mechanical tension in cable harnesses<br />
whilst providing excellent IP ratings.<br />
!Cable breakouts are<br />
available for 2, 3, 4, 5<br />
and 6 core cables.<br />
Technical Table<br />
Recomm. application<br />
(mm²)<br />
442-1 supplied / fully recovered.<br />
ØH<br />
a: Expanded form (supplied)<br />
Recovered<br />
ØH ØH ØJ ØJ P R S HW JW<br />
Article-No. Type from to min. a max. b min. a max. b ±10% ± 10% nom ± 20% ± 20%<br />
404-42022 442-1-B8W 2.5 10.0 28.0 9.0 9.0 1.8 78.0 17.0 20.0 2.7 2.0<br />
404-08022 408-2-B8W2 4.0 35.0 35.0 12.0 15.0 3.0 95.0 24.0 22.0 2.5 2.0<br />
404-09021 409-2-B8W2 35.0 70.0 47.4 22.9 21.5 6.4 165.0 38.1 22.0 4.1 3.3<br />
404-18020 418-4-B8W2 70.0 150.0 60.0 22.9 30.0 6.4 202.0 38.1 38.1 4.1 3.3<br />
404-44010 444-1-B8W2 150 400.0 95.0 35.6 45.0 12.5 240.0 55.0 50.8 4.0 3.5<br />
All Dimensions in mm, except for ″mm²″. Subject to technical changes.<br />
b: Fully recovered form (after heating)<br />
Material Data<br />
Material Polyolefin, chemically cross linked (POX)<br />
Colour Black (BK)<br />
Shrink Ratio up to 3:1<br />
Dielectric Strength 15 kV/mm<br />
Min. Shrink Temperature +135 °C<br />
Operating Temperature -55 °C to +100 °C<br />
Flammability ASTM D635<br />
ØJ<br />
S<br />
�
End Caps<br />
• Helashrink 1600 Series, low voltage<br />
Features and Benefits<br />
End caps are used to seal cables during<br />
storage or transportation. Helashrink 1600<br />
Series end caps can be used as an insulating<br />
cap for live LV cables (0.6/1kV). The adhesive<br />
lined end caps provide an excellent environmental<br />
seal. The outer end seal is marked<br />
with lightning flashes to indicate a live circuit.<br />
End caps can be fitted with air valves for<br />
certain pressurised cable applications. The<br />
high shrink ratio end caps minimise the<br />
number of end cap sizes needed.<br />
Application<br />
End caps are suitable for use on both<br />
polymeric and paper insulated, lead jacketed<br />
cables which may include aluminium or<br />
steel armouring.<br />
a: Expanded form (supplied)<br />
b: Fully recovered form (after heating)<br />
The appropriate end cap for any diameter and type of cable.<br />
Material Data<br />
Article-No. Type<br />
Insulation<br />
Breakout Boots and Endcaps<br />
Material Polyolefin, chemically cross linked (POX)<br />
Colour Black (BK)<br />
Shrink Ratio up to 3:1<br />
Min. Shrink Temperature +135 °C<br />
Operating Temperature -55 °C to +100 °C<br />
Technical Table<br />
Dielectric Strength 15 kV/mm<br />
Flammability ASTM D635<br />
Recomm. application<br />
ØH ØH<br />
Fully recovered<br />
from to min. a max. b P ±10% HW ± 20%<br />
Standard Range<br />
416-12046 1612-1-B8W 4.0 8.0 10.0 4.0 33.5 2.0<br />
416-13054 1613-1-B8W 6.5 16.0 20.0 6.0 55.3 2.3<br />
416-14047 1614-1-B8W2 16.0 32.0 40.0 15.0 90.0 3.0<br />
416-15035 1615-1-B8W2 26.0 51.0 63.0 25.0 143.0 3.3<br />
416-17033 1617-1-B8W2 32.0 61.0 76.0 30.0 158.0 4.0<br />
416-16053 1616-1-B8W2 48.0 80.0 100.0 45.0 162.0 4.0<br />
416-09000 1609-1-B5W2 65.0 110.0 120.0 60.0 150.0 4.0<br />
Special Range<br />
416-01013 1601-1-B8W 10.0 19.0 23.8 9.4 89.0 2.0<br />
416-20025 1620-1-B5W2 13.0 28.0 35.0 12.7 185.0 3.5<br />
416-10000 1610-1-B5W2 90.0 135.0 160.0 82.0 146.0 4.0<br />
All dimensions in mm. Subject to technical changes.<br />
�<br />
3.1<br />
73
3.1<br />
74<br />
Insulation<br />
Breakout Boots and Endcaps<br />
Pinched End Caps<br />
• Helashrink PEC Series, low voltage<br />
Features and Benefits<br />
The PEC-Series can be applied quickly and<br />
easily like a standard heat shrinkable tube.<br />
The inner adhesive liner and the adhesive<br />
plug provide excellent bond and protection<br />
from water ingress. The optimal shrink ratio<br />
of 3:1 and different diameters allow a wide<br />
range of applications. Other diameters and<br />
lenghts are available on request.<br />
Application<br />
Pinched End Caps can be used for mechanical<br />
and environmental protection of stub splices<br />
in electrical harnesses. Due to the quick and<br />
easy installation, these caps can be used for<br />
non-electrical applications as well.<br />
P<br />
P2<br />
The appropriate end cap for any diameter and type of cable.<br />
a: Expanded form (supplied) b: Fully recovered form (after heating)<br />
H<br />
Material Data<br />
ØH ØH HW P P2 Pack<br />
Article-No. Type min. a max. b ± 20% nom nom Cont.<br />
416-00000 PEC-3/1 3.0 1.0 1.0 25.0 20.0 50<br />
416-00003 PEC-4.8/1.5 4.8 1.5 1.0 30.0 25.0 50<br />
416-00001 PEC-6/2 6.0 2.0 1.0 30.0 25.0 50<br />
416-00002 PEC-9/3 9.0 3.0 1.4 35.0 27.0 50<br />
All dimensions in mm. Subject to technical changes.<br />
Inner Wall Adhesive<br />
Material Polyolefin, cross-linked (POX)<br />
Colour Black (BK)<br />
Shrink Ratio 3:1<br />
Min. Shrink Temperature +120 °C<br />
Operating Temperature -45 °C to +125 °C<br />
Technical Table<br />
Dielectric Strength 15 kV/mm according to IEC 684 P2<br />
Flammability self extinguishing in 30 seconds<br />
according to SAE-AMS-DTL-23053/4<br />
HW<br />
�<br />
H
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing 2:1 -<br />
Fluororubber<br />
• Viton ® -E<br />
Features and Benefits<br />
Viton ® -E is a fluoroelastomeric heat shrinkable<br />
tubing. It remains flexible even at very low<br />
temperatures. It has extremely high resistance<br />
to chemicals and maintains its excellent<br />
mechanical strength and flexibility even after<br />
long term exposure to high temperatures.<br />
Viton ® -E tubing is approved to VG 95343/5E.<br />
Application<br />
Viton ® -E is used for reliable protection against<br />
aggressive chemicals in high temperature<br />
environments like engine compartments and<br />
turbines. It is also used when protective<br />
tubings are required to remain flexible at<br />
low temperatures.<br />
!<br />
Cut lengths available on<br />
request. Please contact us!<br />
Technical Table<br />
Material Fluoropolymer cross-linked (FPMX)<br />
Colour Black (BK)<br />
Shrink Ratio 2:1<br />
Longitudinal change<br />
after shrinkage<br />
-10% max.<br />
Min. Shrink Temperature +175 °C<br />
Operating Temperature -55 °C to +200 °C<br />
Dielectric Strength 15 kV/mm<br />
Flammability VG 95343<br />
Specification VG 95343<br />
Designation as per Supplied Recov. Wall Reel Length<br />
Article-No. Type<br />
VG-Norm<br />
Ø D min. Ø d max. (WT) nom. (m)<br />
330-00320 VITON ® -E-3.2/1.6 VG 95343 T 05 E 001 A 3.2 1.6 0.7 50<br />
330-00480 VITON ® -E-4.8/2.4 VG 95343 T 05 E 002 A 4.8 2.4 0.8 50<br />
330-00640 VITON ® -E-6.4/3.2 VG 95343 T 05 E 003 A 6.4 3.2 0.9 50<br />
330-00950 VITON ® -E-9.5/4.8 VG 95343 T 05 E 004 A 9.5 4.8 1.0 50<br />
330-01270 VITON ® -E-12.7/6.4 VG 95343 T 05 E 005 A 12.7 6.4 1.2 25<br />
330-01900 VITON ® -E-19.0/9.5 VG 95343 T 05 E 006 A 19.0 9.5 1.4 25<br />
330-02540 VITON ® -E-25.4/12.7 VG 95343 T 05 E 007 A 25.4 12.7 1.8 25<br />
330-03810 VITON ® -E-38.0/19.0 VG 95343 T 05 E 008 A 38.0 19.0 2.4 15<br />
330-05080 VITON ® -E-50.8/25.4 VG 95343 T 05 E 009 A 50.8 25.4 2.8 15<br />
All dimensions in mm. Subject to technical changes.<br />
Viton ® is a registered trademark of DuPont.<br />
Viton ® -E for flexibility and protection against aggressive chemicals.<br />
Please note! Not all products listed on this page may have this approval.<br />
For product specific approvals please refer to the Appendix.<br />
D<br />
Viton ® -E<br />
Material Data<br />
WT<br />
d<br />
�<br />
Insulation<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing<br />
3.2<br />
75
3.2<br />
76<br />
Insulation<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing 2:1 -<br />
Elastomer<br />
• SE28<br />
Features and Benefits<br />
SE28 is a flexible, high performance elastomeric<br />
tubing. This tubing is used in aerospace,<br />
defence, railway and automotive applications.<br />
SE28 is resistant to diesel fuel, aviation and<br />
hydraulic fluids. It provides reliable protection<br />
against abrasion and mechanical damage<br />
and is very suitable for protecting cables<br />
and wire harnesses.<br />
Application<br />
SE28 is used for long-term protection of<br />
cables and wire harnesses in military<br />
equipment, motor sports, and aviation.<br />
!Cut lengths available on<br />
request. Please contact us!<br />
Technical Table<br />
Designation as per Supplied Recov. Wall Reel Length<br />
Article-No. Type<br />
VG-Norm<br />
Ø D min. Ø d max. (WT) nom. (m)<br />
342-20000 SE28 3,2/1,6 VG 95343 T 05 D 001 A 3.2 1.6 0.7 150<br />
342-20010 SE28 4,8/2,4 VG 95343 T 05 D 002 A 4.8 2.4 0.8 60<br />
342-20020 SE28 6,4/3,2 VG 95343 T 05 D 003 A 6.4 3.2 0.9 60<br />
342-20030 SE28 9,5/4,8 VG 95343 T 05 D 004 A 9.5 4.8 1.0 60<br />
342-20040 SE28 12,7/6,4 VG 95343 T 05 D 005 A 12.7 6.4 1.2 60<br />
342-20050 SE28 19,0/9,5 VG 95343 T 05 D 006 A 19.0 9.5 1.4 30<br />
342-20060 SE28 25,4/12,7 VG 95343 T 05 D 007 A 25.4 12.7 1.8 30<br />
342-20070 SE28 38,0/19,0 VG 95343 T 05 D 008 A 38.0 19.0 2.4 30<br />
342-20080 SE28 51,0/25,4 VG 95343 T 05 D 009 A 51.0 25.4 2.8 30<br />
342-20090 SE28 76,0/38,0 VG 95343 T 05 D 010 A 76.0 38.0 3.2 15<br />
342-20100 SE28 101,2/51,0 VG 95343 T 05 D 011 A 102.0 51.0 3.5 10<br />
All dimensions in mm. Subject to technical changes.<br />
SE28 tubing with breakout boot.<br />
Material Elastomer, cross-linked (POA)<br />
Colour Black (BK)<br />
Shrink Ratio 2:1<br />
Longitudinal change<br />
after shrinkage<br />
-10% max<br />
Min. Shrink Temperature +170 °C<br />
Operating Temperature -75 °C to +150 °C<br />
Dielectric Strength 20 kV/mm<br />
Flammability VG 95343<br />
Please note! Not all products listed on this page may have this approval.<br />
For product specific approvals please refer to the Appendix.<br />
D<br />
SE28<br />
Material Data<br />
WT<br />
Certification VG 95343, SAE - AMS - DTL-23053<br />
d<br />
�
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing 2:1 -<br />
Elastomer<br />
• TE28 - light weight<br />
Features and Benefits<br />
The benefit of the thin walled and very<br />
flexible TE28 tubing is in its lighter weight.<br />
It is used in areas where weight is a key<br />
factor, for example in aerospace applications<br />
or motorsport.<br />
Application<br />
TE28 is used for long-term protection of<br />
cables and wire harnesses in military<br />
equipment, motor sports, and aviation<br />
!Cut lengths available on<br />
request. Please contact us!<br />
Technical Table<br />
Designation as per Supplied Recov. Wall Reel Length<br />
Article-No. Type<br />
VG-Norm<br />
Ø D min. Ø d max. (WT) nom. (m)<br />
342-30000 TE28 2,4/1,2 VG 95343 T 05 D 012 A 2.4 1.2 0.5 150<br />
342-30010 TE28 3,2/1,6 VG 95343 T 05 D 013 A 3.2 1.6 0.5 150<br />
342-30020 TE28 4,8/2,4 VG 95343 T 05 D 014 A 4.8 2.4 0.5 60<br />
342-30030 TE28 6,4/3,2 VG 95343 T 05 D 015 A 6.4 3.2 0.6 60<br />
342-30040 TE28 9,5/4,8 VG 95343 T 05 D 016 A 9.5 4.8 0.6 60<br />
342-30050 TE28 12,7/6,4 VG 95343 T 05 D 017 A 12.7 6.4 0.6 60<br />
342-30060 TE28 19,0/9,5 VG 95343 T 05 D 018 A 19.0 9.5 0.8 30<br />
342-30070 TE28 25,4/12,7 VG 95343 T 05 D 019 A 25.4 12.7 0.9 30<br />
342-30080 TE28 38,0/19,0 VG 95343 T 05 D 020 A 38.0 19.0 1.0 30<br />
342-30090 TE28 51,0/25,4 VG 95343 T 05 D 022 A 51.0 25.4 1.1 30<br />
All dimensions in mm. Subject to technical changes.<br />
Thin wall TE28 tubing with a boot.<br />
Material Elastomer, cross-linked (POA)<br />
Colour Black (BK)<br />
Shrink Ratio 2:1<br />
Longitudinal change<br />
after shrinkage<br />
-10% max.<br />
Min. Shrink Temperature +170 °C<br />
Operating Temperature -75 °C to +150 °C<br />
Dielectric Strength 20 kV/mm<br />
Flammability VG 95343<br />
Certification VG 95343<br />
Please note! Not all products listed on this page may have this approval.<br />
For product specific approvals please refer to the Appendix.<br />
D<br />
TE28<br />
Material Data<br />
Insulation<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing<br />
WT<br />
d<br />
�<br />
3.2<br />
77
3.2<br />
78<br />
Insulation<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing<br />
up to 4:1 - 1 m lengths<br />
• MU47 - medium wall unlined<br />
• MA47 - medium wall adhesive lined<br />
Features and Benefits<br />
MA47 has been designed to protect cable<br />
joints and terminations in low voltage<br />
applications. The adhesive lining makes it<br />
especially suitable for cable applications<br />
above and below ground.<br />
This medium wall tubing is flexible yet has<br />
robust insulation characteristics. MA47<br />
tubing is coated with a thermoplastic<br />
adhesive on the inside, which protects<br />
against humidity and other kinds of<br />
environmental impacts after shrinking.<br />
Application<br />
Insulation and protection of low voltage<br />
cable joints and terminations above and<br />
below ground.<br />
D<br />
MA47, MU47<br />
!<br />
Cut lengths available on<br />
request. Please contact us!<br />
WT<br />
d<br />
MA47 and MU47 medium wall tubing - lined and unlined.<br />
Material Data<br />
Material Polyolefin, cross-linked (POX)<br />
Colour Black (BK)<br />
Shrink Ratio up to 4:1<br />
Operating Temperature MA47-55 °C to +110 °C<br />
MU47-55 °C to +110 °C<br />
Min. Shrink Temperature +120 °C<br />
Softening Point Adhesive +85 °C<br />
Longitudinal change<br />
after shrinkage<br />
-10% max.<br />
Technical Table<br />
Dielectric Strength 20 kV/mm<br />
Supplied Recov. Wall Length<br />
Article-No. Type<br />
Ø D min. Ø d max. (WT) nom. (L) (m)<br />
MA47 - medium wall adhesive lined<br />
323-20120 MA47-12/3 12.0 3.0 2.0 1.0<br />
323-20190 MA47-19/6 19.0 6.0 2.5 1.0<br />
323-20300 MA47-30/8 30.0 8.0 2.5 1.0<br />
323-20400 MA47-40/12 40.0 12.0 2.5 1.0<br />
323-20500 MA47-50/16 50.0 16.0 2.7 1.0<br />
323-20630 MA47-63/19 63.0 19.0 2.8 1.0<br />
323-20750 TREDUX-MA47-75/22 75.0 22.0 3.0 1.0<br />
323-20950 MA47-95/30 95.0 30.0 3.0 1.0<br />
323-21150 MA47-115/34 115.0 34.0 3.0 1.0<br />
323-21400 MA47-140/42 140.0 42.0 3.0 1.0<br />
MU47 - medium wall unlined<br />
323-10120 MU47-12/3 12.0 3.0 2.0 1.0<br />
323-10190 MU47-19/6 19.0 6.0 2.2 1.0<br />
323-10300 MU47-30/8 30.0 8.0 2.5 1.0<br />
323-10400 MU47-40/12 40.0 12.0 2.5 1.0<br />
323-10500 MU47-50/16 50.0 16.0 2.7 1.0<br />
323-10630 MU47-63/19 63.0 19.0 2.8 1.0<br />
323-10750 MU47-75/22 75.0 22.0 3.0 1.0<br />
323-10950 MU47-95/30 95.0 30.0 3.0 1.0<br />
323-11150 MU47 115/34 115.0 34.0 3.0 1.0<br />
323-11400 MU47-140/42 140.0 42.0 3.0 1.0<br />
All dimensions in mm. Subject to technical changes.<br />
halogenfree<br />
�
Constant Force Spring Adaptor<br />
• Zetalok<br />
Features and Benefits<br />
Zetalok is a unique re-enterable termination<br />
system for connecting a cable shielding<br />
braid to a circular connector. When used in<br />
conjunction with our <strong>Heat</strong>shrink moulded<br />
shape, a sealed enviromental termination<br />
system is achieved. The main feature is that<br />
the termination can be re-entered when<br />
required. It is there by possible to effect<br />
repairs to connector pins/sockets without<br />
the need to discard any part of the shielding<br />
system. Due to the self-tensioning nature of<br />
the spring, it provides excellent resistant to<br />
vibration and shock.<br />
Application<br />
Predominantly used in the Aerospace,<br />
Defence and Professional Electronics sectors.<br />
B<br />
A (I/D)<br />
B<br />
T<br />
The various spring sizes.<br />
Zetalok installation system.<br />
Material Data<br />
Material Stainless Steel (SS)<br />
Colour Silver (SR)<br />
Insulation<br />
Adaptor Springs<br />
Technical Table<br />
Inside Material Length Thickness<br />
Article-No. Type Ø (A) Width (B) (L) (T)<br />
425-00002 HE-050 7.34 9.53 107.9 0.1016<br />
425-00003 HE-050-2 7.14 6.53 108.0 0.1016<br />
425-00004 HE-100-1 9.10 9.53 119.0 0.1016<br />
425-00005 HE-200-2 14.40 9.53 127.0 0.1775<br />
425-00007 HE-300-4 18.51 9.53 232.0 0.2540<br />
425-00008 HE-300-3 18.64 6.35 260.3 0.2540<br />
425-00009 HE-400-4 24.86 9.53 217.5 0.3048<br />
All dimensions in mm. Subject to technical changes.<br />
3.3<br />
79
3.4<br />
80<br />
Insulation<br />
Adhesives<br />
Two-component Adhesive for <strong>Heat</strong><br />
<strong>Shrinkable</strong> Tubing and <strong>Shapes</strong><br />
• V9500 Dosing Gun<br />
The V9500 dosing gun allows for clean processing<br />
and individual metering. It is employed<br />
in conjunction with the dual cartridges<br />
627-95002. The V9500 lockable cartridges<br />
are available with or without the processing<br />
set. The processing set is available in two<br />
versions (see table for contents). The cartridges<br />
can be re-used, even after a lapse of several<br />
days, because the closure prevents the<br />
adhesive from hardening.<br />
• V9500<br />
This high performance, VG-approved, two<br />
part epoxy adhesive has been developed to<br />
meet the military requirements associated with<br />
heat shrinkable components for wire and<br />
cable harnesses. It has very good resistance<br />
to most solvents and fuels, even at higher<br />
temperatures. The two part epoxy adhesive<br />
is available in two different packages.<br />
When heat is applied during the shrinking of<br />
the moulded shape, the two part components<br />
react, producing a high performance<br />
bond.<br />
Material Epoxy resins (EP)<br />
Colour Black (BK)<br />
Curing Temperature +135 °C<br />
Curing Time 24 hours at +25 °C, 2 hours at +85 °C<br />
Operating Temperature -75 °C to +150 °C<br />
Specification VG 95343 T15 DA<br />
The V9500 applicator gun guarantees the clean and precise coating of special<br />
fittings.<br />
Technical Table<br />
Article-No. Type Designation as per VG-Norm Content<br />
627-95001 V9500 epoxy adhesive kit VG 95343 T15 A 001 A<br />
1 x dual cartridge (50g),<br />
5 x mixing pots, 5 x mixing sticks,<br />
5 x emery papers<br />
627-95002 V9500 Duo pack VG 95343 T15 A Two component adhesive cartridge<br />
627-95003 V9500 Applicator gun VG 95343 T15 DA Applicator gun<br />
627-95004 V9500 Nozzle VG 95343 T15 MA Mixing nozzle<br />
Subject to technical changes.<br />
Two-component epoxy adhesive V9500.<br />
Material Data<br />
Please note! Not all products listed on this page may have this approval.<br />
For product specific approvals please refer to the Appendix.<br />
halogenfree
Hot Melt Tape for <strong>Heat</strong> <strong>Shrinkable</strong><br />
Tubing and <strong>Shapes</strong><br />
• HMT200A<br />
Features and Benefits<br />
The hot melt tape flows when heated and<br />
provides permanent airtight and watertight<br />
seals.<br />
Application<br />
Designed for use with heat shrinkable<br />
sleeving and mouldings.<br />
Application Method<br />
1. Clean and prepare the bonding areas.*<br />
2. Wrap the tape around the part and<br />
overlap.*<br />
3. Put the tubing or heat shrinkable shape<br />
over the tape and shrink down.*<br />
*As per installation guide<br />
HMT200A<br />
HMT200A tape.<br />
Adhesive tape HMT200A for sealing against humidity.<br />
Material Data<br />
Material Ethylenevinylacetate (EVA)<br />
Colour Transparent (CL)<br />
Operating Temperature -55 °C to +105 °C<br />
Technical Table<br />
Melting Point starting from +95 °C<br />
Thickness Width Reel Length<br />
Article-No. Type<br />
(T) (W) (m)<br />
354-02259 HMT200A 0.25 25.0 50<br />
354-02260 HMT200A 0.25 25.0 10<br />
All dimensions in mm. Subject to technical changes.<br />
halogenfree<br />
Insulation<br />
Adhesives<br />
�<br />
3.4<br />
81
3.4<br />
82<br />
Insulation<br />
Adhesives<br />
High Temperature Hot Melt<br />
Adhesive Tape for Low Profile<br />
Products<br />
• TSA-200<br />
Features and Benefits<br />
A high temperature hot melt adhesive that<br />
bonds well to polyethylene and metals.<br />
Compliments -9 and -8 material (SCX15112<br />
and SCX15111) whilst having good<br />
resistance to water ingress. The hot melt<br />
tape flows when heated to provide a<br />
permanent enviromental seal. Store below<br />
40°C and away from direct sunlight.<br />
Application<br />
Designed for use with our -9 and -8 heat<br />
shrinkable materials.<br />
Application Method<br />
1. Clean and prepare bonding areas.*<br />
2. Wrap the tape around the part and<br />
overlap.*<br />
3. Put the tubing or heat shrinkable shape<br />
over the tape and shrink down.*<br />
* As per installation guide<br />
Hot melt adhesive TSA-200.<br />
Material Data<br />
Material Polyester blend<br />
Colour Black (BK)<br />
Operating Temperature -55 °C to +125 °C<br />
Technical Table<br />
Thickness Width Reel Length<br />
Article-No. Type<br />
(T) (W) (m)<br />
354-03000 TSA-200 0.6 22.0 25<br />
All dimensions in mm. Subject to technical changes.<br />
�
4<br />
Appendix<br />
Page<br />
4.1 HellermannTyton Product Standards<br />
Standards for HellermannTyton <strong>Heat</strong> <strong>Shrinkable</strong> Tubing and<br />
<strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong> according to VG Norm 84<br />
Standards for HellermannTyton <strong>Heat</strong> <strong>Shrinkable</strong> Tubing 85<br />
VG/MIL Specification Cross Reference 86<br />
HellermannTyton <strong>Shapes</strong> for use with MIL Connectors 87<br />
MIL Specification Slash Sheet Cross Reference 88<br />
4.2 Terms and Conditions 95
4.1<br />
84<br />
Appendix<br />
HellermannTyton Product Standards<br />
Standards for HellermannTyton <strong>Heat</strong> <strong>Shrinkable</strong> Tubing and<br />
<strong>Heat</strong> <strong>Shrinkable</strong> <strong>Moulded</strong> <strong>Shapes</strong> according to VG Norm<br />
Description<br />
Description<br />
VG-Norm<br />
HellermannTyton<br />
VG 95343 T05 D 001 A SE28 3,2/1,6<br />
VG 95343 T05 D 002 A SE28 4,8/2,4<br />
VG 95343 T05 D 003 A SE28 6,4/3,2<br />
VG 95343 T05 D 004 A SE28 9,5/4,8<br />
VG 95343 T05 D 005 A SE28 12,7/6,4<br />
VG 95343 T05 D 006 A SE28 19,0/9,5<br />
VG 95343 T05 D 007 A SE28 25,4/12,7<br />
VG 95343 T05 D 008 A SE28 38,0/19,0<br />
VG 95343 T05 D 009 A SE28 51,0/25,4<br />
VG 95343 T05 D 010 A SE28 76,0/38,0<br />
VG 95343 T05 D 011 A SE28 101,2/51,0<br />
VG 95343 T05 D 012 A TE28 2,4/1,2<br />
VG 95343 T05 D 013 A TE28 3,2/1,6<br />
VG 95343 T05 D 014 A TE28 4,8/2,4<br />
VG 95343 T05 D 015 A TE28 6,4/3,2<br />
VG 95343 T05 D 016 A TE28 9,5/4,8<br />
VG 95343 T05 D 017 A TE28 12,7/6,4<br />
VG 95343 T05 D 018 A TE28 19,0/9,5<br />
VG 95343 T05 D 019 A TE28 25,4/12,7<br />
VG 95343 T05 D 020 A TE28 38,0/19,0<br />
VG 95343 T05 D 022 A TE28 51,0/25,4<br />
VG 95343 T05 E 001A VITON ®-E-1/8-BK<br />
VG 95343 T05 E 002A VITON ®-E-3/16-BK<br />
VG 95343 T05 E 003A VITON ®-E-1/4-BK<br />
VG 95343 T05 E 004A VITON ®-E-3/8-BK<br />
VG 95343 T05 E 005A VITON ®-E-1/2-BK<br />
VG 95343 T05 E 006A VITON ®-E-3/4-BK<br />
VG 95343 T05 E 007A VITON ®-E-1-BK<br />
VG 95343 T05 E 008A VITON ®-E-1.1/2-BK<br />
VG 95343 T05 E 009A VITON ®-E-2-BK<br />
VG 95343 T06 A 001 A 152-41-G<br />
VG 95343 T06 A 002 A 153-41-G<br />
VG 95343 T06 A 003 A 154-41-G<br />
VG 95343 T06 A 004 A 155-41-G<br />
VG 95343 T06 A 005 A 156-41-G<br />
VG 95343 T06 A 006 A 157-41-G<br />
VG 95343 T06 A 007 A 158-41-G<br />
VG 95343 T06 A 008 A 159-41-G<br />
VG 95343 T06 A 009 A 160-41-G<br />
VG 95343 T06 A 010 A 199-4-G<br />
VG 95343 T06 B 001 A 152-42-G<br />
VG 95343 T06 B 002 A 153-42-G<br />
VG 95343 T06 B 003 A 154-42-G<br />
VG 95343 T06 B 004 A 155-42-G<br />
VG 95343 T06 B 005 A 156-42-G<br />
VG 95343 T06 B 006 A 157-42-G<br />
VG 95343 T06 B 007 A 158-42-G<br />
VG 95343 T06 B 008 A 159-42-G<br />
VG 95343 T06 B 009 A 160-42-G<br />
VG 95343 T06 C 001 A 157-43-G<br />
VG 95343 T06 C 002 A 158-43-G<br />
VG 95343 T06 C 003 A 159-43-G<br />
VG 95343 T06 C 004 A 160-43-G<br />
VG 95343 T06 D 001 A 129-1-G<br />
VG 95343 T06 D 002 A 130-1-G<br />
VG 95343 T06 D 003 A 131-1-G<br />
VG 95343 T06 D 004 A 132-1-G<br />
VG 95343 T06 D 005 A 133-1-G<br />
VG 95343 T06 D 006 A 134-1-G<br />
VG 95343 T06 D 007 A 135-1-G<br />
VG 95343 T06 D 008 A 136-1-G<br />
Description<br />
Description<br />
VG-Norm<br />
HellermannTyton<br />
VG 95343 T06 D 009 A 138-1-G<br />
VG 95343 T06 D 011 A 176-1-G<br />
VG 95343 T06 D 012 A 177-1-G<br />
VG 95343 T06 D 013 A 178-1-G<br />
VG 95343 T06 D 014 A 179-1-G<br />
VG 95343 T06 E 001 A 1152-4-G<br />
VG 95343 T06 E 002 A 1154-4-G<br />
VG 95343 T06 E 003 A 1155-4-G<br />
VG 95343 T06 E 004 A 1156-4-G<br />
VG 95343 T06 E 005 A 1157-4-G<br />
VG 95343 T06 E 006 A 1158-4-G<br />
VG 95343 T06 E 007 A 1159-4-G<br />
VG 95343 T06 E 008 A 1160-4-G<br />
VG 95343 T06 F 001 A 1121-1-G<br />
VG 95343 T06 F 002 A 1122-1-G<br />
VG 95343 T06 F 003 A 1123-1-G<br />
VG 95343 T06 F 004 A 1124-1-G<br />
VG 95343 T06 F 005 A 1125-1-G<br />
VG 95343 T06 F 006 A 1126-1-G<br />
VG 95343 T06 F 007 A 1127-1-G<br />
VG 95343 T06 F 008 A 1128-1-G<br />
VG 95343 T06 F 009 A 1129-1-G<br />
VG 95343 T06 F 010 A 1141-1-G<br />
VG 95343 T06 F 011 A 1133-1-G<br />
VG 95343 T06 F 012 A 1134-1-G<br />
VG 95343 T06 F 013 A 1135-1-G<br />
VG 95343 T06 F 014 A 1136-1-G<br />
VG 95343 T06 J 001 A 1111-1-G<br />
VG 95343 T06 J 002 A 1112-1-G<br />
VG 95343 T06 J 003 A 1113-1-G<br />
VG 95343 T06 J 004 A 1114-1-G<br />
VG 95343 T06 J 006 A 1116-1-G<br />
VG 95343 T06 J 007 A 1117-1-G<br />
VG 95343 T06 J 008 A 1118-1-G<br />
VG 95343 T06 K 001 A 1505-1-G<br />
VG 95343 T06 K 002 A 1506-1-G<br />
VG 95343 T06 K 003 A 1507-1-G<br />
VG 95343 T06 K 004 A 1501-1-G<br />
VG 95343 T06 K 005 A 1502-2-G<br />
VG 95343 T06 K 006 A 1502-2-G<br />
VG 95343 T06 K 007 A 1506-2-G<br />
VG 95343 T06 K 008 A 1507-2-G<br />
VG 95343 T06 K 009 A 1501-2-G<br />
VG 95343 T06 K 010 A 1502-1-G<br />
VG 95343 T06 L 001 A 2101-1-G<br />
VG 95343 T06 L 002 A 2102-1-G<br />
VG 95343 T06 L 003 A 2103-1-G<br />
VG 95343 T06 L 004 A 2104-1-G<br />
VG 95343 T06 L 005 A 2105-1-G<br />
VG 95343 T06 L 006 A 2101-2-G<br />
VG 95343 T06 L 007 A 2102-2-G<br />
VG 95343 T06 L 008 A 2103-2-G<br />
VG 95343 T06 L 009 A 2105-2-G<br />
VG 95343 T07 A 001 A 152-41-GP<br />
VG 95343 T07 A 002 A 153-41-GP<br />
VG 95343 T07 A 003 A 154-41-GP<br />
VG 95343 T07 A 004 A 155-41-GP<br />
VG 95343 T07 A 005 A 156-41-GP<br />
VG 95343 T07 A 006 A 157-41-GP<br />
VG 95343 T07 A 007 A 158-41-GP<br />
VG 95343 T07 A 008 A 159-41-GP<br />
VG 95343 T07 A 009 A 160-41-GP<br />
Description<br />
Description<br />
VG-Norm<br />
HellermannTyton<br />
VG 95343 T07 B 001 A 152-42-GP<br />
VG 95343 T07 B 002 A 153-42-GP<br />
VG 95343 T07 B 003 A 154-42-GP<br />
VG 95343 T07 B 004 A 155-42-GP<br />
VG 95343 T07 B 005 A 156-42-GP<br />
VG 95343 T07 B 006 A 157-42-GP<br />
VG 95343 T07 B 007 A 158-42-GP<br />
VG 95343 T07 B 008 A 159-42-GP<br />
VG 95343 T07 B 009 A 160-42-GP<br />
VG 95343 T07 C 001 A 157-43-GP<br />
VG 95343 T07 C 002 A 158-43-GP<br />
VG 95343 T07 C 003 A 159-43-GP<br />
VG 95343 T07 C 004 A 160-43-GP<br />
VG 95343 T07 D 001 A 129-1-GP<br />
VG 95343 T07 D 002 A 130-1-GP<br />
VG 95343 T07 D 003 A 131-1-GP<br />
VG 95343 T07 D 004 A 132-1-GP<br />
VG 95343 T07 D 005 A 133-1-GP<br />
VG 95343 T07 D 006 A 134-1-GP<br />
VG 95343 T07 D 007 A 135-1-GP<br />
VG 95343 T07 D 008 A 136-1-GP<br />
VG 95343 T07 D 009 A 138-1-GP<br />
VG 95343 T07 D 010 A 187-1-GP<br />
VG 95343 T07 E 001 A 1152-4-GP<br />
VG 95343 T07 E 002 A 1154-4-GP<br />
VG 95343 T07 E 003 A 1155-4-GP<br />
VG 95343 T07 E 004 A 1156-4-GP<br />
VG 95343 T07 E 005 A 1157-4-GP<br />
VG 95343 T07 E 006 A 1158-4-GP<br />
VG 95343 T07 E 007 A 1159-4-GP<br />
VG 95343 T07 E 008 A 1160-4-GP<br />
VG 95343 T07 F 002 A 1122-1-GP<br />
VG 95343 T07 F 003 A 1123-1-GP<br />
VG 95343 T07 F 004 A 1124-1-GP<br />
VG 95343 T07 F 005 A 1125-1-GP<br />
VG 95343 T07 F 006 A 1126-1-GP<br />
VG 95343 T07 F 007 A 1127-1-GP<br />
VG 95343 T07 F 008 A 1128-1-GP<br />
VG 95343 T07 F 009 A 1129-1-GP<br />
VG 95343 T07 F 010 A 1141-1-GP<br />
VG 95343 T08 A 001 A 1203-1-G<br />
VG 95343 T08 A 002 A 1209-1-G<br />
VG 95343 T08 A 007 A 1201-1-G<br />
VG 95343 T08 A 009 A 1206-1-G<br />
VG 95343 T08 A 010 A 1202-1-G<br />
VG 95343 T08 A 011 A 1207-1-G<br />
VG 95343 T08 A 016 A 1204-1-G<br />
VG 95343 T08 A 017 A 1216-1-G<br />
VG 95343 T08 B 001 A 1301-1-G<br />
VG 95343 T08 B 002 A 1303-1-G<br />
VG 95343 T08 B 003 A 1311-1-G<br />
VG 95343 T08 B 004 A 1302-1-G<br />
VG 95343 T08 B 005 A 1304-1-G<br />
VG 95343 T08 B 006 A 1305-1-G<br />
VG 95343 T08 B 007 A 1312-1-G<br />
VG 95343 T08 B 008 A 1316-1-G<br />
VG 95343 T08 B 009 A 1313-1-G<br />
VG 95343 T08 B 010 A 1306-1-G<br />
VG 95343 T08 B 011 A 1307-1-G<br />
VG 95343 T08 B 012 A 1308-1-G<br />
VG 95343 T08 C 001 A 206-1-G<br />
VG 95343 T08 C 002 A 203-1-G
Description<br />
Description<br />
VG-Norm<br />
HellermannTyton<br />
VG 95343 T08 C 003 A 204-1-G<br />
VG 95343 T08 C 004 A 211-1-G<br />
VG 95343 T08 C 005 A 212-1-G<br />
VG 95343 T08 D 001 A 306-1-G<br />
VG 95343 T08 D 002 A 304-1-G<br />
VG 95343 T08 D 003 A 310-1-G<br />
VG 95343 T08 D 004 A 311-1-G<br />
VG 95343 T08 E 002 A 411-1-G<br />
VG 95343 T08 E 004 A 403-1-G<br />
VG 95343 T08 E 005 A 413-1-G<br />
VG 95343 T09 A 001 A 1203-1-GP<br />
VG 95343 T09 A 002 A 1209-1-GP<br />
VG 95343 T09 A 003 A 1214-1-GP<br />
VG 95343 T09 B 001 A 1301-1-GP<br />
VG 95343 T09 B 002 A 1303-1-GP<br />
VG 95343 T09 B 003 A 1311-1-GP<br />
VG 95343 T09 C 001 A 206-1-GP<br />
VG 95343 T09 C 002 A 203-1-GP<br />
VG 95343 T09 C 003 A 204-1-GP<br />
VG 95343 T15 A 001 A V9500 PK<br />
VG 95343 T15 A 002 B V9500 B<br />
VG 95343 T15 A V9500 P<br />
VG 95343 T15 DA P9500<br />
VG 95343 T15 MA M9500<br />
VG 95343 T18 A 001 A 152-41-GW24<br />
VG 95343 T18 A 002 A 153-41-GW24<br />
VG 95343 T18 A 003 A 154-41-GW24<br />
VG 95343 T18 A 004 A 155-41-GW24<br />
VG 95343 T18 A 005 A 156-41-GW24<br />
VG 95343 T18 A 006 A 157-41-GW24<br />
VG 95343 T18 A 007 A 158-41-GW24<br />
VG 95343 T18 A 008 A 159-41-GW24<br />
VG 95343 T18 A 009 A 160-41-GW24<br />
VG 95343 T18 A 010 A 199-41-GW24<br />
VG 95343 T18 E 001 A 1505-1-GW24<br />
VG 95343 T18 E 002 A 1506-1-GW24<br />
VG 95343 T18 E 003 A 1507-1-GW24<br />
VG 95343 T18 E 004 A 1501-1-GW24<br />
VG 95343 T18 E 005 A 1502-2-GW24<br />
VG 95343 T18 E 006 A 1505-2-GW24<br />
VG 95343 T18 E 007 A 1506-2-GW24<br />
VG 95343 T18 E 008 A 1507-2-GW24<br />
VG 95343 T18 E 009 A 1501-2-GW24<br />
VG 95343 T18 E 010 A 1502-1-GW24<br />
VG 95343 T18 B 001 A 152-42-GW24<br />
VG 95343 T18 B 002 A 153-42-GW24<br />
VG 95343 T18 B 003 A 154-42-GW24<br />
VG 95343 T18 B 004 A 155-42-GW24<br />
VG 95343 T18 B 005 A 156-42-GW24<br />
VG 95343 T18 B 006 A 157-42-GW24<br />
VG 95343 T18 B 007 A 158-42-GW24<br />
VG 95343 T18 B 008 A 159-42-GW24<br />
VG 95343 T18 B 009 A 160-42-GW24<br />
VG 95343 T18 C 001 A 157-43-GW24<br />
VG 95343 T18 C 002 A 158-43-GW24<br />
VG 95343 T18 C 003 A 159-43-GW24<br />
VG 95343 T18 C 004 A 160-43-GW24<br />
VG 95343 T18 D 001 A 1152-4-GW24<br />
VG 95343 T18 D 002 A 1154-4-GW24<br />
VG 95343 T18 D 003 A 1155-4-GW24<br />
VG 95343 T18 D 004 A 1156-4-GW24<br />
VG 95343 T18 D 005 A 1157-4-GW24<br />
Appendix<br />
HellermannTyton Product Standards<br />
Description<br />
Description<br />
VG-Norm<br />
HellermannTyton<br />
VG 95343 T18 D 006 A 1158-4-GW24<br />
VG 95343 T18 D 007 A 1159-4-GW24<br />
VG 95343 T18 D 008 A 1160-4-GW24<br />
VG 95343 T18 G 001 A 2101-1-GW24<br />
VG 95343 T18 G 003 A 2102-1-GW24<br />
VG 95343 T18 G 005 A 2103-1-GW24<br />
VG 95343 T18 G 006 A 2104-1-GW24<br />
VG 95343 T18 G 007 A 2105-1-GW24<br />
VG 95343 T18 G 008 A 2101-2-GW24<br />
VG 95343 T18 G 010 A 2102-2-GW24<br />
VG 95343 T18 G 012 A 2103-2-GW24<br />
VG 95343 T18 G 014 A 2105-2-GW24<br />
VG 95343 T18 H 001 A 1133-2-GW24<br />
VG 95343 T18 H 002 A 1133-1-GW24<br />
VG 95343 T19 A 001 A 1203-1-GW24<br />
VG 95343 T19 A 002 A 1209-1-GW24<br />
VG 95343 T19 A 003 A 1214-1-GW24<br />
VG 95343 T19 A 004 A 1210-1-GW24<br />
VG 95343 T19 A 006 A 1212-1-GW24<br />
VG 95343 T19 A 007 A 1201-1-GW24<br />
VG 95343 T19 A 008 A 1213-1-GW24<br />
VG 95343 T19 A 009 A 1206-1-GW24<br />
VG 95343 T19 A 010 A 1202-1-GW24<br />
VG 95343 T19 A 011 A 1207-1-GW24<br />
VG 95343 T19 A 012 A 1208-1-GW24<br />
VG 95343 T19 A 016 A 1204-1-GW24<br />
VG 95343 T19 A 017 A 1216-1-GW24<br />
VG 95343 T19 A 018 A 1220-1-GW24<br />
VG 95343 T19 E 002 A 411-1-GW24<br />
VG 95343 T19 E 003 A 412-1-GW24<br />
VG 95343 T19 E 004 A 403-1-GW24<br />
VG 95343 T19 E 005 A 413-1-GW24<br />
VG 95343 T19 E 009 A 414-1-GW24<br />
VG 95343 T19 B 001 A 1301-1-GW24<br />
VG 95343 T19 B 002 A 1303-1-GW24<br />
VG 95343 T19 B 003 A 1311-1-GW24<br />
VG 95343 T19 B 004 A 1302-1-GW24<br />
VG 95343 T19 B 006 A 1305-1-GW24<br />
VG 95343 T19 B 007 A 1312-1-GW24<br />
VG 95343 T19 B 008 A 1316-1-GW24<br />
VG 95343 T19 B 009 A 1313-1-GW24<br />
VG 95343 T19 B 010 A 1306-1-GW24<br />
VG 95343 T19 B 011 A 1307-1-GW24<br />
VG 95343 T19 B 012 A 1308-1-GW24<br />
VG 95343 T19 C 001 A 206-1-GW24<br />
VG 95343 T19 C 002 A 203-1-GW24<br />
VG 95343 T19 C 003 A 204-1-GW24<br />
VG 95343 T19 C 004 A 211-1-GW24<br />
Standards for HellermannTyton<br />
<strong>Heat</strong> <strong>Shrinkable</strong> Tubing<br />
Type VG 95343 T05<br />
SE28 �<br />
Viton ® TE28 �<br />
-E �<br />
Description<br />
Description<br />
VG-Norm<br />
HellermannTyton<br />
VG 95343 T19 C 005 A 212-1-GW24<br />
VG 95343 T19 D 001 A 306-1-GW24<br />
VG 95343 T19 D 002 A 304-1-GW24<br />
VG 95343 T19 D 003 A 310-1-GW24<br />
VG 95343 T19 D 004 A 311-1-GW24<br />
VG 95343 T19 D 005 A 312-1-GW24<br />
VG 95343 T29 A 001 A 152-61-HW21<br />
VG 95343 T29 A 002 A 153-61-HW21<br />
VG 95343 T29 A 003 A 154-61-HW21<br />
VG 95343 T29 A 004 A 155-61-HW21<br />
VG 95343 T29 A 005 A 156-61-HW21<br />
VG 95343 T29 A 006 A 157-61-HW21<br />
VG 95343 T29 B 001 A 152-62-HW21<br />
VG 95343 T29 B 002 A 153-62-HW21<br />
VG 95343 T29 B 003 A 154-62-HW21<br />
VG 95343 T29 B 004 A 155-62-HW21<br />
VG 95343 T29 B 005 A 156-62-HW21<br />
VG 95343 T29 B 006 A 157-62-HW21<br />
VG 95343 T29 B 007 A 158-62-HW21<br />
VG 95343 T29 C 001 A 157-63-HW21<br />
VG 95343 T29 C 002 A 158-63-HW21<br />
VG 95343 T29 D 001 A 1152-6-HW21<br />
VG 95343 T29 D 002 A 1154-6-HW21<br />
VG 95343 T29 D 003 A 1155-6-HW21<br />
VG 95343 T29 D 004 A 1156-6-HW21<br />
VG 95343 T29 D 005 A 1157-6-HW21<br />
VG 95343 T29 D 006 A 1158-6-HW21<br />
VG 95343 T30 A 001 A 1203-1-HW21<br />
VG 95343 T30 A 002 A 1209-1-HW21<br />
VG 95343 T30 A 007 A 1201-1-HW21<br />
VG 95343 T30 A 009 A 1206-1-HW21<br />
VG 95343 T30 A 010 A 1202-1-HW21<br />
VG 95343 T30 A 011 A 1207-1-HW21<br />
VG 95343 T30 A 016 A 1204-1-HW21<br />
VG 95343 T30 A 017 A 1216-1-HW21<br />
VG 95343 T30 B 001 A 1301-1-HW21<br />
VG 95343 T30 B 002 A 1303-1-HW21<br />
VG 95343 T30 B 003 A 1311-1-HW21<br />
VG 95343 T30 B 004 A 1302-1-HW21<br />
VG 95343 T30 C 001 A 206-1-HW21<br />
VG 95343 T30 C 002 A 203-1-HW21<br />
VG 95343 T30 C 003 A 204-1-HW21<br />
VG 95343 T30 C 004 A 211-1-HW21<br />
VG 95343 T30 C 005 A 212-1-HW21<br />
VG 95343 T30 D 001 A 306-1-HW21<br />
VG 95343 T30 D 002 A 304-1-HW21<br />
VG 95343 T30 D 003 A 310-1-HW21<br />
VG 95343 T30 D 004 A 311-1-HW21<br />
4.1<br />
85
4.1 Appendix<br />
HellermannTyton Product Standards<br />
86<br />
VG Style/MIL Specification Style Cross Reference<br />
Products listed below in VG style or MIL specification style can be<br />
substituted with each other, to achieve similar fit and function.<br />
VG Parts MIL Specification Parts<br />
152-42 105-4<br />
153-42 N/A<br />
154-42 106-4<br />
155-42 101-4<br />
156-42 102-4<br />
157-43 103-4<br />
158-43 107-4<br />
159-43 118-4<br />
1152-4 1106-4<br />
1154-4 1107-4<br />
1155-4 1104-4<br />
1156-4 1103-4<br />
1157-4 1101-4<br />
1158-4 1105-4<br />
1159-4 1109-4<br />
129-1 129-4*<br />
130-1 130-4*<br />
131-1 131-4*<br />
132-1 132-4*<br />
133-1 133-4*<br />
134-1 134-4*<br />
135-1 135-4*<br />
136-1 136-4*<br />
138-1 138-4*<br />
187-1 187-4*<br />
1122-1 1122-4*<br />
1123-1 1123-4*<br />
1124-1 1124-4*<br />
1125-1 1125-4*<br />
1126-1 1126-4*<br />
1127-1 1127-4*<br />
1128-1 1128-4*<br />
1129-1 1129-4*<br />
1141-1 1141-4*<br />
* Note: These have a longer overall length than<br />
VG parts
HellermannTyton <strong>Shapes</strong> for use with circular<br />
MIL Specification Connectors MS 5015 AB<br />
Connector<br />
Shell Size<br />
Knurl Dia<br />
(mm)<br />
Orientation Cable Dia (mm)<br />
Straight 90° Min Max<br />
10 SL* 15.7 153-42 1152-4/1106-4* 4.2 7.7<br />
14 S 19.3 154-42/106-4 1154-4/1107-4 7.2 10.6<br />
16 S 24.1 155-42/101-4 1155-4/1104-4 8.4 13.5<br />
16 24.1 155-42/101-4 1155-4/1104-4 8.4 13.5<br />
18 24.1 155-42/101-4 1155-4/1104-4 8.4 14.6<br />
20 29.8 156-42/102-4 1156-4/1103-4 10.2 18.7<br />
22 29.8 156-42/102-4 1156-4/1103-4 10.2 20.8<br />
24 38.0 157-43/103-4 1157-4/1101-4 12.0 24.6<br />
28 38.0 157-43/103-4 1157-4/1101-4 12.0 27.0<br />
32 48.0 158-43/107-4 1158-4/1105-4 19.2 33.3<br />
36 48.0 158-43/107-4 1158-4/1105-4 19.2 38.5<br />
* Note: Shell 10 SL for 90° moulded part min cable diameter 6.6 mm<br />
HellermannTyton <strong>Shapes</strong> for use with MIL-C-26482-I/II<br />
and 38999/Series I, II, III, IV<br />
Connector<br />
Shell Size<br />
Knurl Dia<br />
(mm)<br />
Orientation Cable Dia (mm)<br />
Straight 90° Min Max<br />
8/9 13.0 152-42/105-4 1152-4/1106-4 7.2 7.0<br />
10/11 15.0 152-42/105-4 1152-4/1106-4 7.2 10.0<br />
10/12 15.0/19.0 153-42/NA - 7.2 10.0/13.5<br />
12/13 19.0 154-42/106-4 1154-4/1107-4 7.2 13.5<br />
14/15 21.0 155-42/101-4 1155-4/1104-4 8.4 16.5<br />
16/17 24.0 155-42/101-4 1155-4/1104-4 8.4 19.5<br />
18/19 26.5 156-42/102-4 1156-4/1103-4 10.2 22.0<br />
20/21 30.5 156-42/102-4 1156-4/1103-4 10.2 25.0<br />
22/23 34.0 157-43/103-4 1157-4/1101-4 12.0 28.5<br />
24/25 36.0 157-43/103-4 1157-4/1101-4 12.0 31.0<br />
Appendix<br />
HellermannTyton Product Standards<br />
4.1<br />
87
4.1 Appendix<br />
HellermannTyton Product Standards<br />
88<br />
MIL Specification Slash Sheet Cross Reference<br />
HellermannTyton MS3109 Description Style<br />
105-4-JL -11AU<br />
105-4-B7L -11BU<br />
106-4-JL -12AU<br />
106-4-B7L -12BU<br />
101-4-JL -13AU<br />
Bottle <strong>Shapes</strong> with rib<br />
101-4-B7L<br />
102-4-JL<br />
-13BU<br />
-14AU<br />
″J″ or ″B7″ material<br />
102-4-B7L<br />
103-4-JL<br />
-14BU<br />
-15AU<br />
J = Red stripe<br />
B7 = White stripe<br />
103-4-B7L -15BU<br />
Optional drainholes (D)<br />
107-4-JL -16AU<br />
107-4-B7L -16BU<br />
118-4-JL -17AU<br />
118-4-B7L -17BU<br />
129-4-JDL -01AU<br />
129-4-B7DL -01BU<br />
130-4-JDL -02AU<br />
130-4-B7DL -02BU<br />
131-4-JDL -03AU<br />
131-4-B7DL -03BU<br />
132-4-JDL<br />
132-4-B7DL<br />
133-4-JDL<br />
-04AU<br />
-04BU<br />
-05AU<br />
Low profile long outlet<br />
bottle shape with rib<br />
133-4-B7DL -05BU<br />
″J″ or ″B7″ material<br />
134-4-JDL -06AU<br />
J = Red stripe<br />
134-4-B7DL -06BU<br />
B7 = White stripe<br />
135-4-JDL<br />
135-4-B7DL<br />
-07AU<br />
-07BU<br />
Supplied with drainholes (D)<br />
136-4-JDL -08AU<br />
136-4-B7DL -08BU<br />
138-4-JDL -09AU<br />
138-4-B7DL -09BU<br />
187-4-JDL -10AU<br />
187-4-B7DL -10BU<br />
HellermannTyton MS3117 Description Style<br />
1106-4-JL -11AU<br />
1106-4-B7L -11BU<br />
1107-4-JL -12AU<br />
1107-4-B7L -12BU<br />
1104-4-JL -13AU<br />
1104-4-B7L -13BU<br />
1103-4-JL -14AU<br />
1103-4-B7L -14BU<br />
1101-4-JL -15AU<br />
1101-4-B7L -15BU<br />
1105-4-JL -16AU<br />
1105-4-B7L -16BU<br />
1109-4-JL -17AU<br />
1109-4-B7L -17BU<br />
1121-4-JDL -01AU<br />
1121-4-B7DL -01BU<br />
1122-4-JDL -02AU<br />
1122-4-B7DL -02BU<br />
1123-4-JDL -03AU<br />
1123-4-B7DL -03BU<br />
1124-4-JDL -04AU<br />
1124-4-B7DL -04BU<br />
1125-4-JDL -05AU<br />
1125-4-B7DL -05BU<br />
1126-4-JDL -06AU<br />
1126-4-B7DL -06BU<br />
1127-4-JDL -07AU<br />
1127-4-B7DL -07BU<br />
1128-4-JDL -08AU<br />
1128-4-B7DL -08BU<br />
1129-4-JDL -09AU<br />
1129-4-B7DL -09BU<br />
1141-4-JDL -10AU<br />
1141-4-B7DL -10BU<br />
Right angle shape with rib<br />
″J″ or ″B7″ material<br />
J = Red stripe<br />
B7 = White stripe<br />
Optional drainholes (D)<br />
Right angle shapes<br />
Low profile with rib<br />
″J″ or ″B7″ material<br />
J = Red stripe<br />
B7 = White stripe<br />
Supplied with drainholes (D)<br />
L denotes the MIL Specification Stripes.
Appendix<br />
Notes<br />
4.2<br />
89
4.2<br />
90<br />
Appendix<br />
Notes
Appendix<br />
Notes<br />
4.2<br />
91
4.2<br />
92<br />
Appendix<br />
Notes
Appendix<br />
Notes<br />
4.2<br />
93
4.2<br />
94<br />
Appendix<br />
Notes
1. Interpretation<br />
1.1 In these Conditions:<br />
″ACKNOWLEDGEMENT OF ORDER″ shall<br />
mean the document by which the Seller's<br />
authorised representative accepts the Order.<br />
″BUYER″ shall mean the purchaser of the<br />
Goods from the Seller.<br />
″CONDITIONS″ means the terms and conditions<br />
of sale set out herein and includes any<br />
special terms and conditions included in the<br />
Acknowledgement of Order.<br />
″CONTRACT″ shall mean the contract for<br />
the sale and purchase of the Goods made<br />
pursuant to these Conditions.<br />
″DELIVERY″ shall mean delivery of the Goods<br />
or any part of them in accordance with clause<br />
6.1 of these Conditions.<br />
″DELIVERY DATE″ shall mean the date or period<br />
for Delivery set out in an Acknowledgement<br />
of Order or which is otherwise agreed by the<br />
Seller and the Buyer.<br />
″FORCE MAJEURE″ shall mean any circumstances<br />
beyond the reasonable control of<br />
the Seller.<br />
″GOODS″ shall mean the goods which the<br />
Seller has agreed to supply to the Buyer<br />
pursuant to these Conditions.<br />
″INFORMATION″ shall mean any and all IPR,<br />
technical or commercial data, know-how,<br />
show-how, formulae, processes, designs,<br />
photographs, drawings, specifications, samples,<br />
details of customers and suppliers, pricing<br />
information, samples, prototypes and<br />
other sensitive business information and any<br />
other information of a confidential nature<br />
together with any experimental or test data<br />
and results produced by the Seller as a result<br />
of it carrying out necessary tests for the purposes<br />
of performing the Contract which either<br />
directly or indirectly is disclosed by or on<br />
behalf of the Seller to the Buyer or to any<br />
person on behalf of the Buyer orally, in writing,<br />
by physical embodiment, by data transmission<br />
or in any other way.<br />
″INTELLECTUAL PROPERTY RIGHTS″ (″IPR″)<br />
shall mean all patents, trade marks, service<br />
marks, design rights (whether patentable,<br />
registrable or otherwise), applications for<br />
any of the foregoing copyright, know-how,<br />
trade or business names, rights in databases,<br />
topography rights and other similar rights or<br />
obligations whether registrable or not in any<br />
country (including, but not limited to the<br />
United Kingdom). ″LOSS″ shall mean all actions,<br />
claims, demands, losses (direct, indirect, consequential<br />
or otherwise), expenses, costs,<br />
actions and proceedings.<br />
Appendix<br />
General Terms and Conditions of Sale<br />
“ORDER” shall mean the Buyer's order for<br />
Goods.<br />
“SELLER” shall mean Hellermann Tyton, a<br />
Division of Spirent PLC, a company registered<br />
in England and Wales under company<br />
number 470893 and having its registered<br />
office at Crawley Business Quarter, Fleming<br />
Way, Crawley, West Sussex RH10 9QL.<br />
“SPECIFICATION” shall mean the description<br />
of the Goods set out in the Acknowledgement<br />
of Order pursuant to clause 3.4.<br />
1.2 Any reference in these Conditions to any<br />
provision of a statute shall be construed as<br />
a reference to that provision as amended reenacted<br />
or extended at the relevant time.<br />
1.3 The headings in these Conditions are for<br />
convenience only and shall not affect their<br />
interpretation.<br />
1.4 In these Conditions “Incoterms” means<br />
the international rules for the interpretation<br />
of trade terms of the International Chamber<br />
of Commerce 2000. Unless the Contract<br />
otherwise requires any terms or expression<br />
which is defined in or given a particular<br />
meaning by the provisions of Incoterms shall<br />
have the same meaning in these Conditions,<br />
but if there is any conflict between the provisions<br />
of Incoterms and these Conditions<br />
the latter shall prevail.<br />
2. Basis of Sale<br />
2.1 These Conditions together with the Seller's<br />
Acknowledgement of Order apply to all<br />
Contracts between the Seller and the Buyer<br />
and shall prevail and be effective notwithstanding<br />
any variations or additions whether<br />
contained or referred to in the Buyer's order,<br />
or other document submitted by the Buyer<br />
including without limitation any standard<br />
conditions of purchase of the Buyer, acceptance<br />
of quotation or in correspondence or<br />
elsewhere, or implied by trade, custom,<br />
practice or course of dealing, and shall<br />
supersede all other and any prior promises,<br />
representations or undertakings.<br />
2.2 No variation to these Conditions shall<br />
be binding unless agreed in writing by an<br />
authorised representative of the Seller.<br />
2.3 The Seller’s employees or agents are not<br />
authorised to make any representations or<br />
recommendations concerning the Goods<br />
unless confirmed by a duly authorised representative<br />
of the Seller in writing. In entering<br />
into the Contract the Buyer acknowledges<br />
that it does not rely on and waives any claim<br />
for breach of any such representations which<br />
are not so confirmed. For the avoidance of<br />
doubt, nothing herein contained shall be<br />
deemed to exclude the Seller's liability due<br />
to fraudulent misrepresentation.<br />
2.4 Any typographical clerical or other error<br />
or omission in any sales literature quotation<br />
price list Acknowledgement of Order invoice<br />
or other documentation or information issued<br />
by the Seller shall be subject to correction<br />
without any liability on the part of the<br />
Seller.<br />
3. Orders and Specifications<br />
3.1 Every acceptance by the Buyer of any<br />
quotation given by the Seller shall be deemed<br />
an offer by the Buyer to purchase Goods<br />
from the Seller and will not be deemed to be<br />
accepted by the Seller until a duly authorised<br />
representative of the Seller has provided an<br />
Acknowledgement of Order in relation to<br />
such offer by the Buyer.<br />
3.2 No Order submitted by the Buyer<br />
shall be deemed to be accepted by the<br />
Seller unless and until confirmed by an<br />
Acknowledgement of Order.<br />
3.3 The Buyer shall be responsible to the<br />
Seller for ensuring the accuracy of the<br />
terms of any Order (including any applicable<br />
specification) submitted by the Buyer and for<br />
giving the Seller any necessary information<br />
relating to the Goods within a sufficient<br />
time to enable the Seller to perform the<br />
Contract in accordance with its terms.<br />
3.4 The quantity quality and description of<br />
and any specification for the Goods shall be<br />
those set out in the Seller’s Acknowledgement<br />
of Order.<br />
3.5 If the Goods are to be manufactured by<br />
the Seller in accordance with a specification<br />
or instructions submitted by the Buyer:<br />
3.5.1 The Buyer shall indemnify the Seller<br />
against all Loss suffered by the Seller in<br />
connection with any claim by a third party<br />
that the manufacture and/or supply of the<br />
Goods to such specification or instructions<br />
infringes the rights of any third party; and<br />
3.5.2 The Buyer shall be responsible for<br />
supplying reliable and accurate information<br />
to the Seller (including, without limitation,<br />
drawings, plans and designs) to enable the<br />
Seller to manufacture the Goods. The Seller<br />
shall be entitled to assume that all information<br />
supplied by the Buyer is true, accurate, complete<br />
and fit for the purpose for which it is<br />
supplied and that the Seller can rely on the<br />
same. The Seller shall not be liable for any<br />
Loss or delay in Delivery of the Goods which<br />
directly or indirectly arises from the Buyer's<br />
failure to supply accurate information at all<br />
or on time.<br />
4.2<br />
95
4.2 General Terms and Conditions of Sale<br />
Appendix<br />
96<br />
3.6 The Seller reserves the right to make<br />
any changes in the Specification of the Goods<br />
which are required to conform with any<br />
applicable UK safety or other statutory<br />
requirements and/or where such changes do<br />
not materially affect the quality or performance<br />
of the Goods. For the avoidance of<br />
doubt and subject to clause 10.1, the Seller<br />
provides no implied warranties in<br />
relation to Goods supplied to the Buyer's<br />
specification.<br />
3.7 No Order which has been accepted by<br />
the Seller by an Acknowledgement of Order<br />
may be cancelled by the Buyer except with<br />
the agreement in writing of the Seller and<br />
on terms that the Buyer shall indemnify the<br />
Seller in full against all Loss incurred by the<br />
Seller as a result of cancellation.<br />
4. Price of the Goods<br />
4.1 The price shall be the price in the<br />
Acknowledgement of Order (″Price″).<br />
4.2 The Seller reserves the right by giving<br />
notice to the Buyer at any time before<br />
Delivery to increase the Price to reflect any<br />
increase in the cost to the Seller which is<br />
due to any factor beyond the control of the<br />
Seller (such as without limitation any foreign<br />
exchange fluctuation, currency regulation<br />
alteration of duties significant increase in<br />
the costs of labour materials or other costs<br />
of manufacture), any change in Delivery<br />
Dates quantities or specifications for the<br />
Goods which is requested by the Buyer or<br />
any delay caused by any instructions of the<br />
Buyer or failure of the Buyer to give the<br />
Seller adequate information or instructions.<br />
4.3 Except as otherwise stated in an<br />
Acknowledgement of Order all prices are<br />
given by the Seller for Delivery as defined<br />
in clause 6.1. Where the Seller agrees to<br />
deliver the Goods otherwise than as defined<br />
in clause 6.1 the Buyer shall be liable to pay<br />
the Seller’s charges for transport packaging<br />
and insurance where requested.<br />
4.4 The price is exclusive of any applicable<br />
value added tax (which will be applied in<br />
accordance with the legislation in force at<br />
the tax point date) and which the Buyer<br />
shall be additionally liable to pay to the<br />
Seller.<br />
5. Terms of Payment<br />
5.1 Subject to any special terms agreed in an<br />
Acknowledgement of Order the Seller shall<br />
be entitled to invoice the Buyer for the Price<br />
on Delivery immediately the Goods have been<br />
despatched, when they are ready for despatch<br />
but are prevented or delayed from being<br />
despatched due to Force Majeure or the day<br />
the Goods are put out ready for collection<br />
(whichever event occurs the earliest).<br />
5.2 The Buyer shall pay the Price without<br />
deduction within 30 days of the date of the<br />
Seller’s invoice notwithstanding that Delivery<br />
may not have taken place and the property<br />
in the Goods has not passed to the Buyer.<br />
The time of payment of the Price shall be of<br />
the essence of the Contract. Receipts for<br />
payment will be issued only upon request.<br />
5.3 If the Buyer fails to make any payment<br />
in accordance with clause 5.2 then without<br />
prejudice to any other right or remedy available<br />
to the Seller the Seller shall be entitled<br />
to:-<br />
5.3.1 Cancel the contract or suspend any<br />
Deliveries to the Buyer;<br />
5.3.2 Appropriate any payment made by<br />
the Buyer to such of the Goods (or the<br />
goods supplied under any other contract<br />
between the Buyer and the Seller) as the<br />
Seller may think fit (notwithstanding any<br />
purported appropriation by the Buyer);<br />
5.3.3 Charge the Buyer interest on the<br />
amount unpaid at the rate of 3 percent<br />
per annum above HSBC Bank base rate<br />
from time to time until payment in full is<br />
made (a part of a month being treated as<br />
a full month for the purpose of calculating<br />
interest); and<br />
5.3.4 Demand payment of all outstanding<br />
balances from the Buyer whether due or not<br />
and/or cancel all outstanding Orders and/or<br />
decline to make further Deliveries (under<br />
this or any other contract between the<br />
Buyer and the Seller) or provision of<br />
services.<br />
5.4 Except where insolvency laws provide<br />
otherwise the Buyer shall not be entitled to<br />
withhold or set off payment for Goods for<br />
any reason whatsoever. All Goods for which<br />
payment has not been made in accordance<br />
with clause 5.2 and which are held by the<br />
Seller at its premises are so held at the<br />
Buyer's risk.<br />
6. Delivery<br />
6.1 Except as otherwise stated in an<br />
Acknowledgement of Order delivery shall<br />
take place when the Seller places the Goods<br />
at the disposal of the Buyer at the Seller's<br />
premises and not loaded on any collecting<br />
vehicle.<br />
6.2 Any Delivery Date is approximate only.<br />
The Seller shall not be liable for any Loss<br />
arising from any failure to deliver the Goods<br />
on the Delivery Date howsoever caused.<br />
Time for delivery shall not be of the essence<br />
unless previously agreed by the Seller in<br />
writing. The Goods may be delivered by<br />
the Seller in advance of the quoted delivery<br />
date upon giving reasonable notice to the<br />
Buyer.<br />
6.3 The Buyer shall not be entitled to change<br />
the Delivery Date without the consent of a<br />
duly authorised representative of the Seller.<br />
6.4 Where delivery of the Goods is to be<br />
made by the Seller, the Seller reserves the<br />
right to deliver up to 10 per cent more or<br />
10 per cent less than the quantity ordered<br />
provided that there is a pro rata adjustment<br />
to the Price to reflect the Goods actually<br />
delivered and the quantity so delivered shall<br />
be deemed to be the quantity ordered.<br />
Goods delivered in excess of such tolerance<br />
may be rejected by the Buyer provided that<br />
it serves notice of rejection within 10 working<br />
days of Delivery.<br />
6.5 Where the Goods are to be delivered in<br />
installments each delivery shall constitute a<br />
separate contract and failure by the Seller to<br />
deliver any one or more of the installments<br />
in accordance with these Conditions or any<br />
claim by the Buyer in respect of any one or<br />
more installments shall not entitle the Buyer<br />
to treat the Contract as a whole as repudiated.<br />
6.6 Subject to clause 10.6 if the Seller fails<br />
to deliver the Goods for any reason other<br />
than Force Majeure or the Buyer’s fault and<br />
the Seller is accordingly liable to the Buyer<br />
the Seller’s only liability shall be limited to<br />
the excess (if any) of the cost to the Buyer<br />
(having used its best endeavours to replace<br />
the Goods by purchasing them in the cheapest<br />
available market) of purchasing similar<br />
goods to replace those not delivered.<br />
6.7 If the Buyer fails to take Delivery on the<br />
Delivery Date then without prejudice to any<br />
other right or remedy available to the Seller<br />
the Seller may:<br />
6.7.1 store the Goods until actual delivery<br />
and charge the Buyer for the costs (including<br />
insurance) of storage; or<br />
6.7.2 treat the Contract as repudiated by<br />
the Buyer and without prejudice to any<br />
other right it may have against the Buyer<br />
the Seller shall be entitled to resell the<br />
Goods and be indemnified by the Buyer<br />
for any Loss which it suffers.
Appendix<br />
General Terms and Conditions General of SaleTerms<br />
and Conditions of Sale<br />
7. Risk and Property<br />
7.1 Risk of damage to or loss of the Goods<br />
shall pass to the Buyer on Delivery of the<br />
Goods;<br />
7.2 Notwithstanding Delivery and the<br />
passing of risk in the Goods or any other<br />
provision of these Conditions the property<br />
in the Goods shall remain with the Seller<br />
until the Seller has received in cash or cleared<br />
funds payment in full of the Price and<br />
any other monies due to the Seller in<br />
respect of the Goods and all other goods<br />
agreed to be sold by the Seller to the Buyer<br />
for which payment is then due under the<br />
Contract or any other contract between<br />
the Seller and the Buyer (including without<br />
limitation costs of Delivery).<br />
7.3 Until such time as the property in the<br />
Goods passes to the Buyer the Buyer shall<br />
hold the goods as the Seller’s fiduciary agent<br />
and bailee and shall keep the Goods separate<br />
from those of the Buyer and third parties<br />
and properly stored protected and insured<br />
and identified as the Seller’s property.<br />
7.4 Until such time as the property in the<br />
Goods passes to the Buyer the Buyer shall<br />
be entitled to resell or use the Goods in<br />
the ordinary course of its business but shall<br />
account to the Seller for the proceeds of<br />
sale or otherwise of the Goods whether<br />
tangible or intangible including insurance<br />
proceeds and shall keep all such proceeds<br />
separate from any monies or property of the<br />
Buyer and third parties and in the case of<br />
tangible proceeds properly stored<br />
protected and insured.<br />
7.5 If the Goods are prior to sale by the Buyer<br />
made up or incorporated in or mixed with<br />
other goods, then if they remain separately<br />
identifiable the Seller shall retain property<br />
and title thereof and if they do not remain<br />
separately identifiable the Seller shall become<br />
a joint owner of the goods in or which the<br />
Goods are incorporated or mixed in such<br />
proportion as the value of the Goods bears<br />
to the value of the Goods in which the<br />
Goods are so incorporated or mixed.<br />
7.6 If the Buyer sells the Goods or the<br />
goods in which the Goods have been incorporated<br />
or mixed the sale shall be on behalf<br />
of the Seller as the joint owner thereof as<br />
the case may be and the proceeds of any<br />
such sale for the Seller’s share thereof if the<br />
sale is of jointly owned property shall be<br />
held on trust for the Seller and in a separate<br />
identified account.<br />
7.7 Until such time as the property in the<br />
Goods passes to the Buyer (and provided<br />
the Goods are still in existence and have not<br />
been resold) the Seller shall be entitled at<br />
any time to require the Buyer to deliver up<br />
the Goods to the Seller and if the Buyer fails<br />
to do so forthwith to enter the premises of<br />
the Buyer or any third party where the<br />
Goods are stored and take possession of<br />
any Goods in which property remains in the<br />
Seller and remove and dispose of them as<br />
the Seller thinks fit. The Seller shall apply<br />
the proceeds of disposal (after deduction of<br />
all expenses) in discharge of the amount<br />
unpaid by the Buyer.<br />
7.8 The Buyer shall not be entitled to pledge<br />
or in any way charge by way of security<br />
for any indebtedness any of the Goods<br />
which remain the property of the Seller<br />
without the Seller's consent but if the Buyer<br />
does so all moneys owing by the Buyer to<br />
the Seller shall (without prejudice to any<br />
other right or remedy of the Seller)<br />
forthwith become due and payable.<br />
8. Confidentiality and IPR<br />
8.1 The Buyer agrees and undertakes that it<br />
will keep confidential and will not disclose<br />
or use for any purpose (other than to perform<br />
its obligations under the Contract)<br />
any Information. Any Information supplied<br />
to the Buyer by the Seller shall at all times<br />
remain the property of the Seller.<br />
The Buyer shall not acquire any rights in the<br />
Information, which shall be returned to the<br />
Seller immediately upon request.<br />
8.2 Unless otherwise agreed in writing all<br />
IPR in relation to the Goods including without<br />
limitation their method of manufacture<br />
shall vest in the Seller and remain the property<br />
of the Seller not withstanding the<br />
purchase of the Goods by the Buyer and the<br />
Buyer undertakes to do all acts and/or enter<br />
into such agreements or deeds as the Seller<br />
shall require to vest any such IPR in the Seller.<br />
8.3 Unless otherwise agreed in writing and<br />
notwithstanding that the Buyer may have<br />
contributed towards the costs of such items<br />
all tooling (and all IPR in relation to such<br />
tooling) produced or acquired by the Seller<br />
in relation to the manufacture of the Goods<br />
shall be and remain the property of the Seller.<br />
9. Lien<br />
9.1 In addition to any other right or lien to<br />
which the Seller may by law or pursuant to<br />
these Conditions be entitled, the Seller shall<br />
be entitled to a general lien on all the goods<br />
and the property of the Buyer in the Seller’s<br />
possession and a right of sale of such goods<br />
and property at the Seller’s sole discretion<br />
for any unpaid money due under the terms<br />
of the same or any other Contract between<br />
the Seller and the Buyer.<br />
9.2 In addition and without prejudice to its<br />
other rights, the Seller shall have the right<br />
on fourteen days notice to the Buyer to put<br />
any goods or property over which it has a<br />
lien into a saleable state by any means<br />
whatsoever and (without prior notice to the<br />
Buyer) to sell such goods and shall be deemed<br />
the Buyer's agent for the purposes of<br />
effecting such sale. Out of the proceeds of<br />
the sale the Seller shall be entitled to retain<br />
a sum equivalent to all unpaid monies due<br />
to it from the Buyer as aforesaid together<br />
with the cost of putting the goods into a<br />
saleable state and the expenses of sale<br />
without prejudice to the Seller's right to<br />
recover the balance thereof from the Buyer.<br />
10. Warranties and Liability<br />
10.1 The Seller warrants that at Delivery the<br />
Goods will be free from defect in materials,<br />
workmanship and design (where designed<br />
by the Seller) provided that subject as aforesaid<br />
and expressly provided in these Conditions,<br />
and except where the Goods are sold to a<br />
person dealing as a consumer (within the<br />
meaning of the Unfair Contract Terms Act<br />
1977) all warranties conditions or other<br />
terms implied by statute and/or common<br />
law are excluded to the fullest extent permitted<br />
by law.<br />
10.2 Where the Goods are sold under a<br />
consumer transaction (as defined by the<br />
Consumer Transactions (Restrictions on<br />
Statements) Order 1976) the statutory<br />
rights of the Buyer are not affected by<br />
these Conditions.<br />
10.3 Any specification supplied by the<br />
Seller in any estimate or quotation shall be<br />
approximate only and for information and<br />
guidance only and shall not form part of the<br />
Contract.<br />
10.4 Any claim based upon the quality or<br />
condition of the Goods or any failure of the<br />
Goods to meet the Specification (″Claim″)<br />
by the Buyer shall (whether or not delivery is<br />
refused by the Buyer) be notified to the<br />
Seller in writing within 7 days from the date<br />
of delivery or (where the defect or failure<br />
was not apparent on reasonable inspection)<br />
within one month after discovery of the<br />
defect or failure. If delivery is not refused<br />
and the Buyer does not notify the Seller<br />
accordingly, the Buyer shall not be entitled<br />
to reject the Goods and the Seller shall have<br />
no liability in respect of such a Claim and<br />
the Buyer shall be bound to pay the Price as<br />
if the Goods had been delivered in accordance<br />
with the Contract. The Buyer shall<br />
not be entitled to make any Claim after the<br />
expiration of six months from the date of<br />
Delivery of the Goods.<br />
4.2<br />
97
4.2 General Terms and Conditions of Sale<br />
Appendix<br />
98<br />
10.5 Where any valid Claim in respect of any<br />
of the Goods is notified to the Seller in accordance<br />
with clause 10.4 the Seller shall be<br />
entitled to replace the Goods (or the part in<br />
question) free of charge or at the Seller’s sole<br />
discretion refund to the Buyer the Price (or a<br />
proportionate part of the Price) but the Seller<br />
shall have no further liability to the Buyer<br />
and the Buyer shall have no other remedy.<br />
10.6 The Seller shall have no liability to the<br />
Buyer in relation to non-delivery or short<br />
delivery of the Goods unless such non-delivery<br />
or short delivery is notified to the Seller<br />
in writing within fourteen days of the<br />
Delivery Date.<br />
10.7 Where any valid claim in respect of the<br />
Goods is notified to the Seller in accordance<br />
with clause 10.6 the Seller shall be entitled<br />
to deliver the Goods or the shortfall of the<br />
Goods, but the Buyer shall have no other<br />
remedy<br />
10.8 Except in respect of death or personal<br />
injury caused by the Seller’s negligence the<br />
Seller's total liability to the Buyer under these<br />
Conditions shall not exceed the total price<br />
of all Goods supplied hereunder.<br />
10.9 The Seller shall have no liability to the<br />
Buyer under or arising out of or otherwise<br />
in connection with the Contract or the supply<br />
of Goods by the Seller to the Buyer and/<br />
or their use or resale by the Buyer in contract<br />
tort (including negligence or breach of<br />
statutory duty) or otherwise for loss of profit,<br />
business, contracts, revenues or anticipated<br />
savings or for any special indirect<br />
or consequential damage or loss of any<br />
nature or for the costs of recall of any Goods<br />
except as may otherwise be expressly provided<br />
for in these Conditions.<br />
10.10 Notwithstanding any provision of these<br />
Conditions the Seller shall have no liability<br />
to the Buyer in respect of any defect in the<br />
quality of the Goods or the failure of the<br />
Goods to meet Specification where the defect<br />
or failure has arisen as a result of improper<br />
storage or any act or omission of the Buyer.<br />
10.11 For the avoidance of doubt nothing<br />
herein contained shall be deemed to exclude<br />
or restrict the Seller's liability for death or<br />
personal injury arising due to the Seller's<br />
negligence.<br />
10.12 Where any claim is made under this<br />
clause 10 the Buyer grants the Seller or its<br />
agents the right to enter upon the Buyer's<br />
premises to inspect the Goods Unless and<br />
until the Seller has been afforded an opportunity<br />
to examine the Goods no claim will<br />
be accepted.<br />
10.13 The Seller shall not be liable to the<br />
Buyer or be deemed to be in breach of the<br />
Contract by reason of any delay in performing<br />
or any failure to perform any of the Seller’s<br />
obligations in relation to the Goods if the<br />
delay or failure was due to Force Majeure.<br />
10.14 The Buyer shall indemnify the Seller<br />
against all Loss suffered by the Seller which<br />
arises as a result of the breach by the Buyer<br />
of any provision of the Contract or the<br />
negligence of the Buyer or any of its<br />
representatives.<br />
11. Insolvency of Buyer<br />
11.1 In the event that:<br />
11.1.1 The Buyer makes any voluntary<br />
arrangement with its creditors or becomes<br />
subject to an administration order or (being<br />
an individual or firm) becomes bankrupt<br />
or (being a company) goes into liquidation<br />
(otherwise than for the purposes of amalgamation<br />
or reconstruction);<br />
11.1.2 An encumbrancer takes possession<br />
or a receiver or administrator is appointed<br />
of any of the property or assets of the Buyer;<br />
11.1.3 the Buyer ceases or threatens to<br />
cease to carry on business;<br />
11.1.4 the Seller reasonably apprehends<br />
that any of the events mentioned above is<br />
about to occur in relation to the Buyer and<br />
notifies the Buyer accordingly; or<br />
11.1.5 if the Buyer's jurisdiction is not in<br />
England and Wales any events similar to<br />
those described in clauses 11.1.1 to 11.1.4<br />
occur then without prejudice to any other<br />
right or remedy available to the Seller the<br />
Seller shall be entitled to suspend further<br />
performance of the Contract for such time<br />
as it shall in its absolute discretion see fit or<br />
treat the Contract as wrongfully repudiated<br />
by the Buyer and forthwith terminate the<br />
Contract (either with or without notice to<br />
the Buyer) without any liability to the Buyer<br />
and if the Goods have been delivered but not<br />
paid for the Price shall become immediately<br />
due and payable notwithstanding any previous<br />
agreement or arrangement to the contrary.<br />
12. Export Terms<br />
12.1 Where the Goods are supplied for export<br />
from the United Kingdom the provision of<br />
this clause 12 shall (subject to any special<br />
and the Seller) terms agreed in writing between<br />
the Buyer apply notwithstanding any other<br />
provision of these Conditions.<br />
12.2 The Buyer shall be responsible for complying<br />
with any legislation or regulations governing<br />
the importation of the Goods into<br />
the country of destination and for the payment<br />
of any duties thereon. In particular, if<br />
any licence or consent of any government<br />
or other authority shall be required for<br />
the acquisition, carriage or use of the<br />
Goods by the Buyer the Buyer shall obtain<br />
the same at its own expense and if necessary<br />
produce evidence of the same to the<br />
Seller on demand. Failure to do so shall not<br />
entitle the Buyer to withhold or delay payment<br />
of the Price. Any additional expenses or<br />
charges incurred by the Seller resulting from<br />
such failure shall be for the Buyer's account.<br />
12.3 Unless otherwise agreed in writing<br />
between the Buyer and the Seller the Goods<br />
shall be delivered ex-works and the Seller<br />
shall be under no obligation to give the Buyer<br />
notice under section 32(3) of the Sale of<br />
Goods Act 1979.<br />
12.4 Notwithstanding clause 5.2 payment<br />
of all amounts due to the Seller shall be<br />
made by irrevocable letter of credit opened<br />
by the Buyer in favour of the Seller and confirmed<br />
by a bank in the United Kingdom<br />
acceptable to the Seller or if the Seller has<br />
agreed in writing on or before acceptance<br />
of the Buyer’s order to waive this requirement<br />
for any other agreed method of payment<br />
13. General<br />
13.1 The Seller shall be entitled to assign or<br />
subcontract all or any of its rights and obligations<br />
hereunder. The Buyer shall not be<br />
entitled to assign, transfer, subcontract or<br />
otherwise delegate any of its rights or obligations<br />
hereunder.<br />
13.2 Any notice required or permitted to be<br />
given by either party to the other under these<br />
Conditions shall be given in writing at its<br />
registered office or principal place of business<br />
or such other address as may be notified for<br />
such purpose to the party giving notice.<br />
13.3 No waiver by the Seller of any breach<br />
of Contract by the Buyer shall be considered<br />
as a waiver of any subsequent breach of the<br />
same or any other provision.<br />
13.4 If any provision of these Conditions is<br />
held by any competent authority to be invalid<br />
or unenforceable in whole or in part the<br />
validity of the other provisions of these<br />
Conditions and the remainder of the provision<br />
in question shall not be affected thereby.<br />
13.5 The parties hereto intend that no term<br />
of the Contract may be enforced by any<br />
person, entity or body that is not a party to<br />
the Contract.<br />
13.6 The Contract shall be governed by the<br />
laws of England and Wales and the Buyer<br />
and the Seller hereby submit to the exclusive<br />
jurisdiction of the English Courts save<br />
with respect to enforcement where their<br />
jurisdiction shall be non-exclusive.<br />
HT UK Cond of Sale<br />
June 2002
• Operating Temperature -75°C to +200°C<br />
• Can be factory pre-coated into all HellermannTyton<br />
range of small electronic <strong>Heat</strong>shrink shapes<br />
• W24 is a low tack gel, and does not need excessive<br />
initial heating in order to melt the adhesive, before<br />
surface wetting and subsequent bonding<br />
• W24 is not susceptible to moisture absorption, therefore<br />
delamination from the surface will not take place<br />
• Product does not need to be kept in sealed packaging<br />
W24 - High performance<br />
one part epoxy adhesive<br />
W24 - Features W24 - Benefits<br />
Visible adhesive flow<br />
• Handling strength achieved after initial recovery 80% cure.<br />
Cable can be bent when cool at 90° around mandrel 6 x<br />
dia of cable<br />
• Harness can be moved immediately, ultimate properties in<br />
7 days<br />
• Stored at normal temperatures, and away from direct sunlight<br />
W24 adhesive lined shapes have a 5 year shelf life<br />
• W24 also flows when the shape is shrunk, enabling the<br />
customer to form a smooth fillet of adhesive between the<br />
tail of the heatshrink shape and jacket
06/2011<br />
For further information please contact<br />
HellermannTyton<br />
William Prance Road<br />
Plymouth International Technology Park<br />
Plymouth<br />
PL6 5WR<br />
United Kingdom<br />
Tel: +44 (0) 1752 761211<br />
Fax: +44 (0) 1752 761210<br />
E-Mail: info@HellermannTyton.co.uk<br />
www.HellermannTyton.co.uk