motion-control-drives-D31-5-complete-English-2020-03-Update-2020-08

© Siemens 2020 

Motion Control Drives 

SINAMICS Converters 

for Single-Axis Drives 

SINAMICS G120X infrastructure converters 

for HVAC/Water/Wastewater 

Catalog 

D 31.5 

Edition 

March 2020 

www.siemens.com/sinamics-g120x 

Update 08/2020


Related catalogs 

Motion Control Drives D 31.1 

SINAMICS Inverters for Single-Axis Drives 

Built-In Units 

Industrial Controls 

SIRIUS Classic 

IC 10 AO 

E86060-K5531-A111-A1-7600 

PDF (E86060-K1010-A191-A5-7600) 


SINAMICS Inverters for Single-Axis Drives 

Distributed Inverters 

E86060-K5531-A121-A1-7600 

SINAMICS S120 D 21.3 

Chassis Format Converter Units 

Chassis-2 Format Converter Units 

Cabinet Modules, Cabinet Modules-2 

SINAMICS S150 

Converter Cabinet Units 

E86060-K5521-A131-A7-7600 

Low-Voltage Power Distribution and LV 10 

Electrical Installation Technology 

SENTRON • SIVACON • ALPHA 

Protection, Switching, Measuring and Monitoring 

Devices, Switchboards and Distribution Systems 

PDF (E86060-K8280-A101-B1-7600) 

Print (E86060-K8280-A101-A6-7600) 

SIMATIC ST 70 

Products for 

Totally Integrated Automation 

PDF (E86060-K4670-A101-B7-7600) 


SINAMICS S120 and SIMOTICS 

SIMATIC 

Products for 

Totally Integrated Automation 

ST 70 N 

E86060-K5521-A141-A1-7600 

PDF (E86060-K4670-A151-B1-7600) 

SIMOTICS S-1FG1 D 41 

Servo geared motors 

Helical, Parallel shaft, Bevel and 

Helical worm geared motors 

PDF (E86060-K5541-A101-A4-7600) 

SIMATIC HMI / 

ST 80/ST PC 

PC-based Automation 

Human Machine Interface Systems 

PC-based Automation 

PDF (E86060-K4680-A101-C7-7600) 

SIMOTICS GP, SD, XP, DP D 81.1 

Low-Voltage Motors 

Type series 1FP1, 1LE1, 1LE5, 1MB1, 1MB5, 1PC1 

Frame sizes 63 to 450 

Power range 0.09 to 1000 kW 

PDF (E86060-K5581-A111-B4-7600) 

Industrial Communication 

SIMATIC NET 

E86060-K6710-A101-B8-7600 

IK PI 

SIMOGEAR D 50.1 

Geared Motors 

Helical, parallel shaft, bevel, helical worm 

and worm geared motors 

E86060-K5250-A111-A6-7600 

Industry Mall 

Information and Ordering Platform 

on the Internet: 

www.siemens.com/industrymall 

Motion Control System PM 21 

SIMOTION 

Equipment for Production Machines 

E86060-K4921-A101-A4-7600 

Industrial Controls IC 10 

SIRIUS 

E86060-K1010-A101-B1-7600 



SINAMICS Converters 

for Single-Axis Drives 



Catalog D 31.5 · March 2020 

Dear Customer, 

We are happy to present you with the new PDF version of the Catalog D 31.5 · March 2020. 

The catalog provides a comprehensive overview of the new SINAMICS G120X converter system for HVAC, water and wastewater 

applications in the infrastructure sector. With an available power range from 0.75 kW to 630 kW (1 hp to 700 hp), the new series 

masters every challenge here. 

The products listed in this Catalog are also included in the Industry Mall. 

Please contact your local Siemens office for additional information. 

Up-to-date information about SINAMICS G120X is available online at 


You can access our Interactive Catalog and our Industry Mall on the Internet at: 


Your personal contact will be glad to receive your suggestions and recommendations for improvement. You can find your 

representative in our personal contacts database at 

www.siemens.com/automation-contact 

We hope that you will often enjoy using Catalog D 31.5 as a selection and ordering reference document and wish you every success 

with our products and solutions. 

With kind regards, 

Achim Peltz 

Vice President 

General Motion Control 

Siemens AG, Digital Industries, Motion Control 

siemens.com/drives

© Siemens 2020


SINAMICS Converters for Single-Axis Drives 

SINAMICS G120X infrastructure converters for HVAC/Water/Wastewater 

Motion Control Drives 

System overview 

1 


2 


Catalog D 31.5 · March 2020 

Supersedes: 

Catalog D 31.5 · September 2019 

Engineering tools 

3 

Refer to the Industry Mall for current updates of 

this catalog: 


Please contact your local Siemens branch. 


Services and documentation 

4 

Appendix 

5 

Click on an Article No. in the catalog PDF to call it up in the 

Industry Mall and to obtain all the information. 

Article No. 

6SL3070-0AA00-0AG0 

6SL3072-0AA00-0AG0 

Or directly on the Internet, e.g. 

www.siemens.com/product?6SL3070-0AA00-0AG0 

The products and systems described in 

this catalog are manufactured/distributed 

under application of a certified quality 

management system in accordance with 

EN ISO 9001. The certificate is recognized 

by all IQNet countries. 



Digital Enterprise 

The building blocks that ensure 

everything works together 

perfectly in the digital enterprise 

Digitalization is already changing all areas of life and existing 

business models. It is placing greater pressure on industry 

while at the same time creating new business opportunities. 

Today, thanks to scalable solutions from Siemens, companies 

can already become a digital enterprise and ensure their 

competitiveness. 

Industry faces tremendous challenges 

Reduce 

time-to-market 

Boost 

flexibility 

Improve 

quality 

Boost 

efficiency 

Increase 

security 

Today manufacturers 

have to bring products to 

market at an ever-increasing 

pace despite the 

growing complexity of 

these products. In the 

past, a major manufacturer 

would push aside a 

small one, but now it is a 

fast manufacturer that 

overtakes a slow one. 

Consumers want customized 

products, but at 

a price they would pay 

for a mass-produced 

item. That only works 

if production is more 

flexible than ever 

before. 

To ensure a high level of 

quality while meeting 

legal requirements, 

companies have to 

establish closed quality 

loops and enable the 

traceability of products. 

Today the product itself 

needs to be sustainable 

and environmentally 

friendly, while energy 

efficiency in production 

has become a competitive 

advantage. 

Increasing networking 

escalates the threat to 

production facilities 

of cyberattacks. Today 

more than ever, companies 

need suitable 

security measures. 

2 Siemens D 31.5 · March 2020


The digital enterprise has already 

become a reality 

To fully benefit from all the advantages of 

digitalization, companies first have to 

achieve complete consistency of their data. 

Fully digitally integrated business processes, 

including those of suppliers, can help to 

create a digital representation of the entire 

value chain. This requires 

• the integration of industrial software 

and automation, 

• expansion of the communication networks, 

• security in automation, 

• and the use of business-specific 

industrial services. 

MindSphere 

The cloud-based open IoT operating 

system from Siemens 

With MindSphere, Siemens offers a costeffective 

and scalable cloud platform as a 

service (PaaS) for the development of applications. 

The platform, designed as an open 

operating system for the Internet of Things, 

makes it possible to improve the efficiency 

of plants by collecting and analyzing large 

volumes of production data. 

Totally Integrated Automation (TIA) 

Where digitalization becomes reality 

Totally Integrated Automation (TIA) ensures 

the seamless transition from the virtual to 

the real world. It already encompasses all 

the necessary conditions for transforming 

the benefits of digitalization into true added 

value. The data that will form the digital 

twin for actual production is generated from 

a common base. 

Digital Plant 

Learn more about the 

digital enterprise for the 

process industry 

www.siemens.com/ 

digitalplant 

Digital Enterprise Suite 

Learn more about the 

digital enterprise for the 

discrete industry 

www.siemens.com/ 

digital-enterprise-suite 

Siemens D 31.5 · March 2020 

3


Integrated Drive Systems 

Faster on the market and in the black with Integrated Drive Systems 

Integrated Drive Systems are Siemens’ trendsetting answer to the high 

degree of complexity that characterizes drive and automation technology 

today. The world’s only true one-stop solution for entire drive systems is 

characterized in particular by its threefold integration: Horizontal, vertical, 

and lifecycle integration ensure that every drive system component fits 

seamlessly into the whole system, into any automation environment, and 

even into the entire lifecycle of a plant. 

The outcome is an optimal workflow – from engineering all the way to 

service that entails more productivity, increased efficiency, and better 

availability. That’s how Integrated Drive Systems reduce time to market 

and time to profit. 

Horizontal integration 

Integrated drive portfolio: The core elements of a fully integrated drive 

portfolio are frequency converters, motors, couplings, and gear units. 

At Siemens, they‘re all available from a single source. Perfectly integrated, 

perfectly interacting. For all power and performance classes. As standard 

solutions or fully customized. No other player in the market can offer a 

comparable portfolio. Moreover, all Siemens drive components are 

perfectly matched, so they are optimally interacting. 

You can boost the avail ability 

of your application or plant 

to up to 

99 % * 

*e.g., conveyor application 

Vertical integration 

Thanks to vertical integration, the complete drive train is 

seamlessly integrated in the entire automation environment – 

an important prerequisite for production with maximum 

value added. Integrated Drive Systems are part of Totally 

Integrated Automation (TIA), which means that they 

are perfectly embedded into the system architecture 

of the entire industrial production process. This 

enables optimal processes through maximum 

communication and control. 

With TIA Portal you can 

cut your engineering time 

by up to 

30 % 

Lifecycle integration 

Lifecycle integration adds the factor of time: Software and service 

are available for the entire lifecycle of an Integrated Drive System. 

That way, important optimization potential for maximum 

productivity, increased efficiency, and highest availability 

can be leveraged throughout the system’s lifecycle – 

from planning, design, and engineering to operation, 

maintenance, and all the way even to 

modernization. 

With Integrated Drive Systems, assets 

become important success factors. They 

ensure shorter time to market, maximum 

productivity and efficiency in operation, 

and shorter time to profit. 

With Integrated Drive 

Systems you can reduce 

your main tenance costs 

by up to 

15 % 

www.siemens.com/ids 

4 Siemens D 31.5 · March 2020



1 

1/2 The SINAMICS converter family 

1/6 Drive selection 

1/7 SIMOTICS motors 

1/8 SIMOTICS low-voltage motors 

for line and converter operation 

1/9 Energy efficiency classes 

in accordance with EN 50598 

1/12 SINAMICS G120X infrastructure 

converters for HVAC/Water/Wastewater 

1/14 SINAMICS G120X Starter Kits 

Further information about SINAMICS and 

SIMOTICS can be found on the Internet at 

www.siemens.com/sinamics 

www.siemens.com/simotics 

Siemens D 31.5 · March 2020



1 

The SINAMICS converter family 

■ Overview 

Integration in automation 

Management level 

Office environment: SIMATIC IT / COMOS... 

Process control level 

Control center / control system: 

SIMATIC PCS 7 / WINCC 

Control level 

Automation systems / HMI: 

SIMATIC / SIMOTION / SINUMERIK 

Fieldbus 

SINAMICS V 

SINAMICS G 

SINAMICS V 

SINAMICS G 

SINAMICS S 

SINAMICS V 

SINAMICS G 

SINAMICS S 

SINAMICS S 

pumping 

ventilating 

compressing moving processing machining 

G_D011_EN_00337d 

Totally Integrated Automation and communication 

SINAMICS is an integral component of the Siemens "Totally 

Integrated Automation" concept. Integrated SINAMICS systems 

covering configuration, data storage, and communication at 

automation level ensure low-maintenance solutions with the 

SIMATIC, SIMOTION and SINUMERIK control systems. 

Depending on the application, the appropriate variable 

frequency drives can be selected and incorporated in the 

automation concept. With this in mind, the drives are clearly 

subdivided into their different applications. A wide range of 

communication options (depending on the drive type) are 

available for establishing a communication link to the automation 

system: 

• PROFINET 

• PROFIBUS 

• EtherNet/IP 

• Modbus TCP 

• Modbus RTU 

• AS-Interface 

• BACnet MS/TP 

Applications 

SINAMICS is the comprehensive converter family from Siemens 

designed for machine and plant engineering applications. 

SINAMICS offers solutions for all drive tasks: 

• Simple pump and fan applications in the process industry 

• Demanding single drives in centrifuges, presses, extruders, 

elevators, as well as conveyor and transport systems 

• Drive line-ups in textile, plastic film, and paper machines as 

well as in rolling mill plants 

• Highly dynamic servo drives for machine tools, as well as 

packaging and printing machines 

1/2 Siemens D 31.5 · March 2020



■ Overview 

SINAMICS as part of the Siemens modular automation system 


1 

SIMOTION 

SINUMERIK 

SIMATIC 

SINAMICS 

SIMOGEAR 

SIMOTICS 

G_D011_XX_00515b 

Innovative, energy-efficient and reliable drive systems and 

applications as well as services for the entire drive train 

The solutions for drive technology place great emphasis on the 

highest productivity, energy efficiency and reliability for all 

torque ranges, performance and voltage classes. 

Siemens offers not only the right innovative variable frequency 

drive for every drive application, but also a wide range of 

energy-efficient low-voltage motors, geared motors, explosionprotected 

motors and high-voltage motors for combination with 

SINAMICS. 

Furthermore, Siemens supports its customers with global 

pre-sales and after-sales services, with over 295 service points 

in 130 countries – and with special services e.g. application 

consulting or motion control solutions. 

Energy efficiency 

Energy management process 

Efficient energy management consultancy identifies the energy 

flows, determines the potential for making savings and implements 

them with focused activities. 

Almost two thirds of the industrial power requirement is from 

electric motors. This makes it all the more important to use drive 

technology permitting energy consumption to be reduced 

effectively even in the configuration phase, and consequently to 

optimize plant availability and process stability. With SINAMICS, 

Siemens offers powerful energy efficient solutions which, 

depending on the application, enable a significant reduction 

in electricity costs. 


1/3



1 


■ Overview 

Up to 70 % potential for savings using variable-speed operation 

SINAMICS enables great potential for savings to be realized by 

controlling the motor speed. In particular, huge potential savings 

can be recovered from pumps, fans and compressors which are 

operated with mechanical throttle and valves. Here, changing to 

variable-speed drives brings enormous economic advantages. 

In contrast to mechanical control systems, the power consumption 

at partial load operation is always immediately adjusted to 

the demand at that time. So energy is no longer wasted, permitting 

savings of up to 60 % – in exceptional cases even up to 

70 %. Variable-speed drives also offer clear advantages over 

mechanical control systems when it comes to maintenance and 

repair. Current spikes when starting up the motor and strong 

torque surges become things of the past – and the same goes 

for pressure waves in pipelines, cavitation or vibrations which 

cause sustainable damage to the plant. Smooth starting and 

ramp-down relieve the load on the mechanical system, ensuring 

a significantly longer service life of the entire drive train. 

Regenerative feedback of braking energy 

In conventional drive systems, the energy produced during 

braking is converted to heat using braking resistors. Energy 

produced during braking is efficiently recovered to the supply 

system by versions of SINAMICS G and SINAMICS S drives with 

regenerative feedback capability and these devices do not 

therefore need a braking resistor. This permits up to 60 % of the 

energy requirement to be saved, e.g. in lifting applications. 

Energy which can be reused at other locations on a machine. 

Furthermore, this reduced power loss simplifies the cooling of 

the system, enabling a more compact design. 

Energy transparency in all configuration phases 

Early on, in the configuration phase, the SIZER for Siemens 

Drives engineering tool provides information on the specific 

energy requirement. The energy consumption across the entire 

drive train is visualized and compared with different plant 

concepts. 

SINAMICS in combination with energy-saving motors 

Engineering integration stretches beyond the SINAMICS 

converter family to higher-level automation systems, and to a 

broad spectrum of energy-efficient motors with a wide range of 

performance classes, which, compared to previous motors, are 

able to demonstrate up to 10 % greater efficiency. 

Variants 

Depending on the application, the SINAMICS converter family offers the ideal variant for any drive task. 

Performance 

SINAMICS V 

SINAMICS G 

SINAMICS S 

Price 

SINAMICS V drives focus on 

the essentials both in terms of hardware 

and functionality. 

This results in a high degree of ruggedness 

combined with lower investment costs. 

SINAMICS G drives function perfectly for low 

and medium demands on the dynamic 

response of the control system. 

SINAMICS S drives are predestined 

for demanding single - and multi-axis 

applications in machine and plant engineering 

as well as for numerous motion control tasks. 

G_D011_EN_00449b 




■ Overview 

Platform concept 

All SINAMICS variants are based on a platform concept. Joint 

hardware and software components, as well as standardized 

tools for dimensioning, configuration, and commissioning tasks 

ensure high-level integration across all components. SINAMICS 

handles a wide variety of drive tasks with no system gaps. The 

different SINAMICS variants can be easily combined with each 

other. 

Quality management according to EN ISO 9001 

SINAMICS conforms to the most exacting quality requirements. 

Comprehensive quality assurance measures in all development 

and production processes ensure a consistently high level of 

quality. 

Of course, our quality management system is certified by an 

independent authority in accordance with EN ISO 9001. 


IDS – Integration at its very best 

The Siemens Integrated Drive Systems (IDS) solution offers perfectly 

matched drive components with which you can meet your 

requirements. The drive components reveal their true strengths 

as an Integrated Drive System over the full range from engineering 

and commissioning through to operation: Integrated system 

configuration is performed using the Drive Technology Configurator: 

Just select a motor and a converter and design them with 

the SIZER for Siemens Drives engineering tool. The STARTER 

and SINAMICS Startdrive commissioning tools integrate the motor 

data and at the same time simplify efficient commissioning. 

Integrated Drive Systems are incorporated in the TIA Portal – this 

simplifies engineering, commissioning and diagnostics. 

1 

Low voltage 

Direct 

voltage 

Medium 

voltage 

Standard performance 

frequency converters 

Distributed 

frequency 

converters 

Industry-specific frequency 

converters 

Servo drives 

High performance 

frequency converters 

DC 

converters 

Converters for 

applications 

with high 

outputs 

SINAMICS 

V20 

G120C 

G120 

SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS 

G130 

G150 

G110D 

G120D 

G110M 

SIMATIC 

ET 200pro FC-2 

G120X G180 V90 S110 S210 S120 

S120M 

S150 DCM 

DCP * 

GH150 

GH180 

GM150 

SM150 

GL150 

SL150 

SM120CM 

0.12 kW to 

250 kW 

75 kW to 

2700 kW 

Pumps, fans, Pumps, 

compressors, fans, 

conveyor compressors, 

belts, mixers, conveyor 

mills, spinning belts, mixers, 

machines, mills, 

textile extruders 

machines, 

refrigerated 

display 

counters, 

fitness 

equipment, 

ventilation 

systems, 

single-axis 

positioning 

applications in 

machine and 

plant 

engineering 

0.37 kW to 

7.5 kW 

Conveyor 

technology, 

single-axis 

positioning 

applications 

(G120D) 

0.75 kW to 

630 kW 

Pumps, 

fans, 

compressors, 

building 

management 

systems, 

process 

industry, 

HVAC, 

water/waste 

water 

industries 

2.2 kW to 

6600 kW 

Pumps, 

fans, 

compressors, 

conveyor 

belts, 

extruders, 

mixers, mills, 

kneaders, 

centrifuges, 

separators 

0.05 kW to 

7 kW 

Handling 

machines, 

packaging 

machines, 

automatic 

assembly 

machines, 

metal forming 

machines, 

printing 

machines, 

winding and 

unwinding 

units 

0.55 kW to 

132 kW 

Single-axis 

positioning 

applications in 

machine and 

plant 

engineering 

0.05 kW to 

7 kW 

Packaging 

machines, 

handling 

equipment, 

feed and 

withdrawal 

devices, 

stacking units, 

automatic 

assembly 

machines, 

laboratory 

automation, 

wood, glass 

and ceramics 

industry, 

digital printing 

machines 

0.55 kW to 

5700 kW 

Production 

machines 

(packaging, 

textile and 

printing 

machines, 

paper 

machines, 

plastic 

processing 

machines), 

machine 

tools, plants, 

process lines 

and rolling 

mills, marine 

drives, test 

bays 

75 kW to 

1200 kW 

Test bays, 

cross cutters, 

centrifuges 

6 kW to 

30 MW 

Rolling mill 

drives, 

wire-drawing 

machines, 

extruders and 

kneaders, 

cableways 

and lifts, 

test bay drives 

* DC/DC 

controllers 

0.15 MW to 

85 MW 

Pumps, 

fans, 

compressors, 

mixers, 

extruders, 

mills, 

crushers, 

rolling mills, 

conveyor 

technology, 

excavators, 

test bays, 

marine drives, 

blast furnace 

fans, retrofit 

Catalog 

D 31.1 

Catalog Catalog Catalog Catalog 

D 11 D 31.2 D 31.5 D 18.1 

Catalog 

D 33 

Catalog Catalog 

D 31.1 D 32 

Catalogs 

D 21.3, D 21.4 

NC 62 

Catalog 

D 21.3 

Catalog 

D 23.1 

* Industry Mall 

Catalogs 

D 15.1, D 12 

Engineering tools (e.g. Drive Technology Configurator, SIZER for Siemens Drives, STARTER and SINAMICS Startdrive) 

G_D011_EN_00450o 


1/5



1 

Drive selection 

■ Overview 

SINAMICS selection guide – typical applications 

Use 

Requirements for torque accuracy/speed accuracy/position accuracy/coordination of axes/functionality 

Continuous motion 

Non-continuous motion 

Basic Medium High Basic Medium High 

Pumping, 

ventilating, 

compressing 

Centrifugal pumps 

Radial / axial fans 

Compressors 

V20 

G120C 

G120X 

Centrifugal pumps 

Radial / axial fans 

Compressors 

Eccentric screw 

pumps 

Hydraulic pumps 

Metering pumps 


Metering pumps 

G120X 

S120 G120 S110 S120 

G180 1) G130/G150 

Descaling pumps 


Moving 

Processing 

Machining 

Conveyor belts 

Roller conveyors 

Chain conveyors 

V20 

G110D 

G110M 

G120C 

ET 200pro FC-2 2) 

Mills 

Mixers 

Kneaders 

Crushers 

Agitators 

Centrifuges 

V20 

G120C 

Main drives for 

• Turning 

• Milling 

• Drilling 

S110 

Using the SINAMICS selection guide 

Conveyor belts 

Roller conveyors 

Chain conveyors 

Lifting/ 

lowering devices 

Elevators 

Escalators/ 

moving walkways 

Indoor cranes 

Marine drives 

Cable railways 

G120 

G120D 

G130/G150 

G180 1) 

Mills 

Mixers 

Kneaders 

Crushers 

Agitators 

Centrifuges 

Extruders 

Rotary furnaces 

G120 

G130/G150 

G180 1) 


• Drilling 

• Sawing 

S110 

S120 

Elevators 

Container cranes 

Mining hoists 

Excavators for 

open-cast mining 

Test bays 

S120 

S150 

DCM 

Extruders 

Winders/unwinders 

Lead/follower drives 

Calenders 

Main press drives 

Printing machines 

S120 

S150 

DCM 


• Turning 

• Milling 

• Drilling 

• Gear cutting 

•Grinding 

The varying range of demands on modern variable frequency 

drives requires a large number of different types. Selecting 

the optimum drive has become a significantly more complex 

process. The application matrix shown simplifies this selection 

process considerably, by suggesting the ideal SINAMICS drive 

for examples of typical applications and requirements. 

■ More information 

Further information about SINAMICS is available on the Internet at 

www.siemens.com/sinamics 

Practical application examples and descriptions are available on the Internet at 

www.siemens.com/sinamics-applications 

Acceleration 

conveyors 

Storage and retrieval 

machines 

V90 

G120 

G120D 

Tubular bagging 

machines 

Single-axis motion 

control 

such as 

• Position profiles 

• Path profiles 

V90 

G120 

Axis drives for 

• Turning 

• Milling 

• Drilling 

Acceleration 

conveyors 


machines 

Cross cutters 

Reel changers 

S110 

S210 

DCM 

Tubular bagging 

machines 

Single-axis motion 


such as 

• Position profiles 

• Path profiles 

S110 

S210 

S120 S110 S110 

S120 


• Drilling 

• Sawing 


machines 

Robotics 

Pick & place 

Rotary indexing tables 

Cross cutters 

Roll feeds 

Engagers/ 

disengagers 

S120 

S210 

DCM 

Servo presses 

Rolling mill drives 

Multi-axis motion 


such as 

• Multi-axis positioning 

•Cams 

• Interpolations 

S120 

S210 

DCM 


• Turning 

• Milling 

• Drilling 

• Lasering 

• Gear cutting 

•Grinding 

• Nibbling and 

punching 

S120 

• The application type is selected from the vertical column 

- Pumping, ventilating, compressing 

-Moving 

- Processing 

- Machining 

• The quality of the motion type is selected from the horizontal row 

-Basic 

-Medium 

-High 

1) Industry-specific converters. 

2) Information on the SIMATIC ET 200pro FC-2 frequency converter is 

available in Catalog D 31.2 and at www.siemens.com/et200pro-fc 




■ Overview 

SIMOTICS motors 

1 

SIMOTICS 

Low-voltage motors for line and converter operation 

General Purpose 

SIMOTICS GP 

Severe Duty 

SIMOTICS SD 

Explosion-proof 

SIMOTICS XP 

Definite Purpose 

SIMOTICS DP 

Flexible Duty 

SIMOTICS FD 

Transnorm 

SIMOTICS TN 

High Torque 

SIMOTICS HT 

DC motors 

Direct Current SIMOTICS DC 

High-voltage motors 

High Voltage SIMOTICS HV 

Motors for motion control 

SIMOTICS S servomotors SIMOTICS M main motors SIMOTICS L linear motors SIMOTICS T torque motors 

Servomotors Servo geared motors 

G_D011_EN_00491 

SIMOTICS stands for 

• 150 years of experience in building electric motors 

• The most comprehensive range of motors worldwide 

• Optimum solutions in all industries, regions and power/ 

performance classes 

• Innovative motor technologies of the highest quality and 

reliability 

• Highest dynamic performance, precision and efficiency 

together with the optimum degree of compactness 

• Our motors can be integrated into the drive train as part of the 

overall system 

• A global network of skill sets and worldwide service around 

the clock 

A clearly structured portfolio 

The entire SIMOTICS product portfolio is transparently organized 

according to application-specific criteria in order to help 

users select the optimum motor for their application. 

The product range extends from standard motors for pumps, 

fans and compressors to highly dynamic, precise motion control 

motors for positioning tasks and motion control in handling applications, 

as well as production machinery and machine tools, 

to DC motors and powerful high-voltage motors. Whatever it is 

that you want to move – we can supply the right motor for the 

task. 


An outstanding performance for any job 

A key characteristic of all SIMOTICS motors is their quality. They 

are robust, reliable, dynamic and precise to assure the requisite 

performance level for any process and deliver exactly the capabilities 

demanded by the application in hand. Thanks to their 

compact design, they can be integrated as space-saving units 

into installations. Furthermore, their impressive energy efficiency 

makes them effective as a means of reducing operating costs 

and protecting the environment. 

A dense network of skill sets and servicing expertise 

around the world 

SIMOTICS offers not only a wealth of sound experience gleaned 

from a development history which stretches back over around 

150 years, but also the know-how of hundreds of engineers. This 

knowledge and our worldwide presence form the basis for a 

unique proximity to industries which feeds through in tangible 

terms to the specific motor configuration which is tailored to suit 

your application. 

Our specialists are available to answer all your queries regarding 

any aspect of motor technology. At any time – wherever you 

are in the world. When you choose SIMOTICS, therefore, you 

reap the benefits of a global service network which is continuously 

accessible, thereby helping to optimize response times 

and minimize downtimes. 

Perfection of the complete drive train 

SIMOTICS is perfectly coordinated with other Siemens product 

families. In combination with the SINAMICS integrated converter 

family and the SIRIUS complete portfolio of industrial controls, 

SIMOTICS fits seamlessly as part of the complete drive train 

into automation solutions which are based on the SIMATIC, 

SIMOTION and SINUMERIK control systems. 


1/7



1 

SIMOTICS low-voltage motors for line and converter operation 

■ Overview 

Low-voltage motors for line and converter operation 

General Purpose 

SIMOTICS GP 

Severe Duty 

SIMOTICS SD 

Explosion Proof 

SIMOTICS XP 

Definite Purpose 

SIMOTICS DP 

Transnorm 

SIMOTICS TN 

Flexible Duty 

SIMOTICS FD 

High Torque 

SIMOTICS HT 

IEC: 

0.09 … 45 kW 

Reluctance: 

0.55 … 52 kW 

NEMA: 

1 … 200 hp 

IEC: 

0.09 … 200 kW 

Reluctance: 

0.55 … 78 kW 

NEMA: 

1 … 400 hp 

IEC: 

0.09 … 460 kW 

IEC: 

0.37 … 200 kW 

200 ... 3500 kW 

200 ... 1800 kW 150 ... 2100 kW 

NEMA: 

1 … 300 hp 

NEMA: 

1 … 200 hp 

IEC: 

0.6 … 294 Nm 

Reluctance: 

3.4 … 191 Nm 

NEMA: 

1.5 … 883 lb-ft 

IEC: 

1 … 1202 Nm 

Reluctance: 

2.3 … 286 Nm 

NEMA: 

1.5 … 1483 lb-ft 

IEC: 

1.2 … 4043 Nm 

NEMA: 

1.5 … 1187 lb-ft 

IEC: 

2.5 … 1546 Nm 

NEMA: 

1.5 … 1104 lb-ft 

642 … 20864 Nm 610 … 14600 Nm 6000 … 42000 Nm 

IEC: 

750 … 3000 rpm 

(at 50 Hz) 

Reluctance: 

1500/1800/2610 rpm 

NEMA: 

900 … 3600 rpm 

(at 60 Hz) 

IEC: 

750 … 3000 rpm 

(at 50 Hz) 

Reluctance: 

1500/1800/2610/ 

3000/3600 rpm 

NEMA: 

900 … 3600 rpm 

(at 60 Hz) 

IEC: 

750 … 3000 rpm 

(at 50 Hz) 

NEMA: 

900 … 3600 rpm 

(at 60 Hz) 

IEC: 

750 … 3000 rpm 

(at 50 Hz) 

NEMA: 

900 … 3600 rpm 

(at 60 Hz) 

IEC: 

750 … 3000 rpm 

(at 50 Hz) 

IEC: 

750 … 3000 rpm 

(at 50 Hz) 

IEC: 

200 … 800 rpm 

(at 50 Hz) 

Pumps, fans and 

compressors with 

especially low 

weight requirements 

Pumps, fans, 

compressors, 

mixers, mills, 

extruders and 

rollers with special 

demands in terms 

of ruggedness, 

particularly in the 

chemical and 

petrochemical 

industries 

General industrial 

applications with 

special requirements 

regarding 

explosion protection 

for use in Zones 1, 

2, 21, and 22 such 

as in the process 

industry 

Ships, work and 

transport roller 

tables, tunnels, 

multi-story car 

parks, shopping 

malls, dockside 

cranes, container 

terminals as well as 

motors customized 

for special 

applications 

Pumps, fans, 

compressors, 

conveyor belts, 

mixers, extruders in 

the chem. and 

petrochem. industry, 

paper-making 

machines, mining, 

cement, steel 

industry, and marine 

applications 

including propulsion 

Pumps, fans, 

compressors, 

conveyor belts, 

centrifuges, 

extruders, winders, 

hoisting gear in 

cranes, presses, 

paper machines, 

rolling mills, marine 

applications 

including propulsion 

High-torque 

gearless motors for 

paper-making 

machines, 

low-speed pumps, 

mills, steel shears, 

bow thrusters, 

winches or main 

drives on ships 

IEC: D 81.1 

NEMA: D 81.2 

IEC: D 81.1 

NEMA: D 81.2 

SIMOTICS GP and SIMOTICS SD 

SIMOTICS GP General Purpose motors with an aluminum housing 

are suitable for a wide range of standard drive tasks in industrial 

environments. SIMOTICS SD Severe Duty motors with a 

cast-iron housing are extremely rugged and are therefore the 

first choice for applications in harsh environmental conditions. 

SIMOTICS GP and SIMOTICS SD are fundamentally optimized 

for line operation. In addition, two converter-optimized motor 

lines are available for variable-speed converter-fed operation. 

• Induction technology (VSD10 line) 

The VSD10 line converter motors are designed exclusively for 

use on converters and are specially optimized for SINAMICS 

frequency converters. In terms of economy, efficiency and 

reliability, they are perfectly matched to SINAMICS G120 

standard converters over the complete life cycle. 

1/8 Siemens D 31.5 · March 2020 

IEC: D 81.1, D 83.1 

NEMA: D 81.2 

IEC: D 81.1 

NEMA: D 81.2 

D 81.1, D 84.1 D 81.8 D 86.2 

G_D011_EN_00516b 

• Synchronous reluctance technology (VSD4000 line) 

VSD4000 line reluctance motors are designed exclusively for 

use on converters and are specially optimized for 

SINAMICS G120. Compared to systems with induction 

motors, synchronous reluctance technology is characterized 

by particularly high efficiency levels, especially in the partial 

load range, and by high dynamics. The vector control of the 

frequency converter ensures optimal operating characteristics. 

More information on the reluctance drive system is 

available at 

www.siemens.com/reluctance-drive-system 

SIMOTICS XP 

Our rugged SIMOTICS XP explosion-proof motors are exceptionally 

durable, even in the harshest conditions, and absolutely 

fail-safe - in both line and converter operation. 

SIMOTICS XP motors meet all requirements with maximum 

safety and maximum efficiency. 

Note: Suitable for use with SINAMICS G120X only when installed 

in a safe area. Suitable for motors in an explosion-proof enclosure 

design.



■ Overview 

Step by step to more efficiency 

One of the core objectives of the European Union is a sustainable 

power industry. In industrial plants today, around 70 % of 

the power demand is from electrically driven systems. This high 

percentage contains huge potential for saving energy in electrical 

drives. For that reason, the European Union introduced 

minimum requirements for the energy efficiency of electric 

motors in the form of a statutory motor regulation as early as 

2011. 

However, measures aimed solely at the motor are not enough to 

achieve the mandatory energy-saving targets. The European 

legislation fills this gap with the standard series EN 50598 and 

extends the focus from individual drive components to entire 

drive systems, even enabling consideration of specific use 

cases. 

The European standard series EN 50598 defines the ecodesign 

requirements for drive systems in the low-voltage range with an 

electrically driven machine. It consists of definitions for energy 

efficiency (parts 1 and 2) and an ecobalance calculation 

(part 3). 

To take account of the different use cases, consideration of eight 

application-relevant operating points has been introduced as 

mandatory for the first time. Determination of loss values at these 

eight points and definition of efficiency classes are laid down by 

the standard in a uniform way. This enables data relevant to 

operation, such as application-specific load profiles, to now be 

taken into account more easily in the energy efficiency analysis. 

The standard is especially important for variable-speed drives of 

the following types: 

• for AC/AC converters without energy recovery functionality 

• for motors with integrated converters 

• for supply voltages of 100 V to 1000 V 

• for power ratings of 0.12 kW to 1000 kW 

To cover all applications of driven machines, the new standard 

defines operating points in full-load and partial-load operation, 

at which the losses of the motor and drive systems have to be 

determined. Based on the loss data at the operating points in 

partial-load operation, variable-speed drives can be explicitly 

considered in more detail. This makes their advantages 

especially clear. 

Energy efficiency classes in accordance with EN 50598 

Centrifugal pumps, fans 

Hoisting gear, extruders, 

conveyor belts 

Winders, coilers 

Relative 

torque 

Relative 

torque 

Relative 

torque 

100 

% 

50 

25 

100 

% 

50 

25 

100 

% 

50 

25 

Load torque M ~ n 2 

50 

Relative speed 

50 


Duty cycles for different driven machines 

Moreover, frequency converters and motor systems are classified 

in efficiency classes, which permit an initial rough estimate 

of the potential saving. Definition of reference systems is a key 

aspect of this because they provide standard reference values. 

The positioning of these reference systems defines the efficiency 

class. The relative distance from the reference system can be 

used as an absolute measure of the efficiency at the operating 

point in question. 

% 

Load torque M = constant 

Load torque M ~ 1/n 

50 


% 

% 

100 

G_D011_EN_00467 

100 

100 

1 


1/9



1 


■ Overview 

Advantages of the detailed loss consideration of EN 50598 

over the previous consideration of efficiencies and 

maximum loss values 

For motors, the efficiency consideration was previously only 

defined for operation without a converter at 50/60 Hz. It provides 

a good way of comparing the energy efficiency of motors from 

different manufacturers for this use case. 

The more detailed loss analysis of EN 50598, on the other hand, 

is aimed at speed-controlled operation and therefore now also 

includes motors especially designed for converter operation in 

the energy analysis. These were previously not covered by the 

applicable standards. 

Moreover, a loss analysis over the entire setting and load range 

of the motor is possible. This is done in accordance with the 

standard EN 50598 with typical values. 

For holistic consideration, it is essential to include all the relevant 

components of a drive system. The EN 50598 standard defines 

this in detail. The standardized expression of power loss data 

as a percentage makes comparison considerably easier and 

more transparent. 

The method also makes it possible to consider a motor that 

produces a holding torque at speed zero, for example. In this 

case, the efficiency is zero, but a power loss from current producing 

magnetization and holding torque does occur. In summary, 

the key advantage of standard EN 50598 is the ability to 

perform the energy analysis of an electrical drive system based 

on standardized load profiles in all operating ranges due to uniform 

general conditions. This provides the user with complete 

transparency irrespective of the manufacturer. 

Establishing efficiency classes of frequency converters 

(Complete Drive Modules CDM) 

To avoid overmodulation and to ensure comparability between 

makes, which cannot be achieved otherwise, the efficiency 

classes of CDMs refer to the 90/100 operating point (90 % motor 

stator frequency, 100 % torque current). 

Standard EN 50598-2 defines the relative losses of a CDM in 

efficiency classes IE0 to IE2. With reference to the value of a 

CDM of efficiency class IE1 (reference converter), a CDM of 

efficiency class IE2 has 25 % lower losses and a CDM of 

efficiency class IE0 has 25 % higher losses. 

Operating points for CDMs 

Relative 

torque current 

100 p CDM (0, 100) p CDM (50, 100) p CDM 

(90, 100) 

% 

50 

25 

0 

0 

Determination of the 

efficiency classes IE0 to IE2 

p CDM 

(0, 50) 

p CDM 

(0, 25) 

p CDM 

(50, 50) 

p CDM 

(50, 25) 

50 % 

Relative motor stator frequency 

90 

p CDM 

(90, 50) 

G_D011_EN_00468 

100 

p CDM 

(90, 100) 

p RCDM 

(90, 100) 

Reference value 

(reference converter) 

125% 

100% 

75% 

50% 

IE0 

IE1 

IE2 

25% greater losses 

than reference value 

Reference value ±25% 

25% lower losses than 

reference value 

Complete Drive Module (CDM) – determining the efficiency class 

Establishing the efficiency classes of drive systems 

(Power Drive Systems PDS) 

What is possible for the individual systems, of course, also 

applies to the entire electrical PDS (frequency converter plus 

motor). Detailed comparisons are now possible at this level, too. 

The reference values for the reference system provide clear 

indications of the energy performance of the PDS. 

Because targeted matching of the motor and CDM provides 

additional potential for optimization in electrical drive systems, it 

is especially important for the user to consider the entire drive 

system. 

For the efficiency class of a PDS, too, a specific load point is 

defined. In this case, the reference point used is the 100/100 

operating point (100 % motor stator frequency, 100 % torque). 

Standard EN 50598-2 defines the relative losses of a PDS in 

efficiency classes IES0 to IES2. With reference to the value of 

a PDS of efficiency class IES1 (reference drive), a PDS of 

efficiency class IES2 has 20 % lower losses and a PDS of 

efficiency class IES0 has 20 % higher losses. 




■ Overview 

Operating points for PDS 


1 

Motor losses 

CDM losses 

(Complete Drive Modules, frequency converters) 

100 

p RM 

(100, 100) 

100 p CDM (0, 100) p CDM (50, 100) p CDM 

(90, 100) 

% 

% 

Relative 


50 

25 

Relative 


50 

25 

p CDM 

(0, 50) 

p CDM 

(0, 25) 

p CDM 

(50, 50) 

p CDM 

(50, 25) 

p CDM 

(90, 50) 

0 

0 

50 % 


100 

0 

0 

50 % 

Relative motor stator frequency 

90 

100 

PDS losses 

(Power Drive System) 

100 p PDS (0, 100) p PDS (50, 100) p PDS 

(100, 100) 

% 

Determination of the 

efficiency classes IES0 to IES2 

Relative torque 

p PDS 

(0, 50) 

50 

p PDS 

(0, 25) 

25 

0 

0 

p PDS 

(50, 50) 

p PDS 

(50, 25) 

50 % 


90 

100 

p PDS 

(100, 50) 

G_D011_EN_00469 

Reference value 

(reference system = 

reference converter 

+ reference motor) 

p PDS 

(100, 100) 

p RPDS 

(100, 100) 

120% 

100% 

80% 

50% 

IES0 

IES1 

IES2 

20% greater losses 

than reference value 

Reference value ±20% 

20% lower losses than 

reference value 

Power Drive System (PDS) – determining the efficiency class 


An example of a highly efficient drive system with efficiency 

class IES2 is the new synchronous inductance drive system with 

SIMOTICS reluctance motors and SINAMICS drives. 

More information is available on the Internet at 

www.siemens.com/drivesystem-reluctance 

www.siemens.com/simotics-gp 

www.siemens.com/simotics-sd 

Power loss data of SINAMICS converters for single-axis drives 

are available on the Internet at 

https://support.industry.siemens.com/cs/document/94059311 

More information on current laws and standards, new standards, 

and mandatory guidelines is available on the Internet at 

www.siemens.com/legislation-and-standards 


1/11



1 


■ Overview 

SINAMICS G120X, frame sizes FSA to FSJ, degree of protection IP20, 

with IOP-2 Intelligent Operator Panel 

Easy handling, utmost reliability, superior efficiency and advanced 

digitalization - Siemens offers an answer to these trends 

with the SINAMICS G120X converter series. SINAMICS G120X is 

an innovative and user-friendly converter series that has been 

specifically developed for applications performed in infrastructure 

environments such as water/wastewater, but also for tasks 

in building automation. In this context, the converter supports, 

for example, pump, fan and compressor applications through 

numerous integrated functionalities and combines these in one 

device for the target sectors. 

The SINAMICS G120X converter is an integrated and efficient 

drive solution for a wide range of tasks. The system allows convenient 

handling through optimized user interfaces: IOP-2 Intelligent 

Operator Panel with graphic color display and the optional 

web server module SINAMICS G120 Smart Access - a Wi-Fibased 

web server solution. Thus, the SINAMICS G120X fulfils 

the request for an easy and fast setup of the devices during the 

commissioning phase. Further, experienced users can use the 

full flexibility of a SINAMICS converter and adjust the relevant 

application to their requirements. 

Totally integrated operation - this approach is also supported 

from ordering through to delivery. For example, all the major features 

of the converter are configured and displayed in the article 

number. The delivery includes the complete device - as configured 

- that means, the converter and the selected operator 

panel. 

In addition, SINAMICS G120X has an extremely rugged and reliable 

construction. The integrated DC link reactor with a maximum 

output of 250 kW and optional resistance to harmful gases 

up to environmental class 3C3 ensure a reliable, stable and 

largely robust operation. 

The converter system is fit for digitalization. Thanks to its full integration 

in the SINAMICS CONNECT 300 system, data from up 

to eight converters can be acquired and transferred to the 

MindSphere cloud solution. The MindSphere application 

"Analyze MyDrives" facilitates the evaluation of data - tailored to 

individual customer needs. This simplifies the acquisition and 

evaluation of converter conditions. 

Further, the SINAMICS G120X converter series provides innovative 

hardware and software functions, e.g. for controlling synchronous 

reluctance drive systems with SIMOTICS reluctance 

motors. In this way, the SINAMICS G120X converter series 

makes a substantial contribution towards saving energy and 

makes more careful use of our natural resources. 

Portfolio range 

The SINAMICS G120X converter series with degree of protection 

IP20/UL Open Type offers a seamless system approach in three 

different voltage rangeswith wide options of built-in communication 

interfaces including PROFINET, EtherNet/IP, USS, 

Modbus RTU, BACnet MS/TP and PROFIBUS DP: 

• 200 V to 240 V 3 AC: 0.75 kW to 55 kW (1 hp to 75 hp) 


• 500 V to 690 V 3 AC: 3 kW to 630 kW (4 hp to 700 hp) 

User-friendliness 

A high degree of user-friendliness is one of the main characteristics 

of the SINAMICS G120X: 

• Operator panel with color display and extensive diagnostics 

functions (IOP-2 Intelligent Operator Panel) 

• Two different setup options are available: Standard and quick 

start with graphical user guidance 

• Optimized setups for pumps and fans in the web server module 

SINAMICS G120 Smart Access 

• SINAMICS SD card for storing parameter settings, cloning 

and local commissioning 

Integrated functionalities for the start/operational/stop 

phases of the application 

SINAMICS G120X is always preset, depending on the selected 

converter performance. Further, the following functions can be 

easily selected and parameterized: 

Start phase 

During the start phase, the following functions are supported by 

default: 

• Deragging mode for pumps for cleaning the pump system, improving 

efficiency and reducing wear 

• Pipe filling mode for preventing pressure shocks in pipeline 

systems 

• Two acceleration ramps for shorter start/stop times 

• Flying restart of the running motor for fast hot restart 

• Automatic restart function after power failure during short 

downtimes 

Operating phase 

During the operating phase, the following functions are supported 

by default: 

• Continued run mode with autonomous reduction of output and 

pulse frequency 

• PID controller for autonomous closed-loop control mode, operated 

according to analog input values 

• Up to 16 variable-speed setpoints as fixed frequencies 

• Speed monitoring via sensor (pulse input) 

• Multi-pump control of up to four pumps 

• Protection against blocking, leakage, dry running and 

cavitation 

• Fire response mode for extended operation in case of emergency 

• Skip frequencies for skipping critical frequencies and avoiding 

vibration 

• Real time clock for switching over setpoints or controlling releases 

Stop phase 

During the stop phase, the following functions are supported by 

default: 

• STO (Safe Torque Off) according to IEC 61508 SIL 3 and 

EN ISO 13489-1 PL e and Category 3. 

External components (e.g. safety relays) are necessary for using 

the STO safety function. 

• ON/OFF2 for an optimized braking ramp 

• Condensation protection for the motor 

• Frost protection function for the pump 

A detailed description of the functions and connection diagrams 

are included in the device documentation. 





■ Overview 

Commissioning of complex applications 

Sample applications, which include the description and device 

setting, are provided for SINAMICS G120X. 

The following application descriptions are available: 

• Fan for exhaust air with closed-loop control of pressure and air 

quality 

• Fan for cooling tower with closed-loop control of the cooling 

water temperature 

• Fan for tunnel/parking garage with closed-loop control of air 

quality and essential service mode 

• Fan for supply air with closed-loop control of pressure, temperature, 

air quality and flowrate 

• Pumps with closed-loop control of the pressure 

• Pumps with closed-loop control of the filling level 

• Pumps for cooling circuits with closed-loop control of the temperature 

• Compressor with closed-loop control of the pressure 

• Vacuum pump with closed-loop control of the pressure 

Practical application examples and descriptions are available 

on the Internet at 



1 


1/13



1 

SINAMICS G120X Starter Kits 

■ Overview 

■ Selection and ordering data 

Description 


Converter (380 ... 480 V 3 AC, PROFINET) 

with IOP-2 and SINAMICS G120 Smart 

Access 

• 0.75 kW, FSA, without integrated 

line filter 

• 0.75 kW, FSA, with integrated line 

filter Category C2 

• 3 kW, FSA, with integrated line 


• 7.5 kW, FSB, with integrated line 


NEW NEU 

NEW NEU 

NEW NEU 

NEW NEU 

Article No. 

6SL3200-0AE70-0AA0 

6SL3200-0AE72-0AA0 

6SL3200-0AE73-0AA0 

6SL3200-0AE74-0AA0 

G_D011_EN_00566 

SINAMICS G120X 

FSA with IOP-2 

(Intelligent Operator Panel) 

SINAMICS G120 

Smart Access 

(web server module) 

Example: SINAMICS G120X Starter Kit, frame size FSA, 0.75 kW, with 

IOP-2 Intelligent Operator Panel and SINAMICS G120 Smart Access 

A SINAMICS G120X Starter Kit comprises a SINAMICS G120X 

converter (380 ... 480 V 3 AC; PROFINET) with an IOP-2 Intelligent 

Operator Panel and a SINAMICS G120 Smart Access web 

server module. 

The delivery quantity is limited to three units per customer. 

The SINAMICS G120X Starter Kits can be perfectly combined 

with the SIMATIC Starter Kits. In this way simple drive tasks up 

to motion control applications can be quickly implemented. 

Further information on SIMATIC Starter Kits can be found at: 

www.siemens.com/s7-1200-starterkits 

www.siemens.com/s7-1500-starterkits 




0.75 kW to 630 kW (1 hp to 700 hp) 

2 

2/2 SINAMICS G120X infrastructure 

converters for HVAC/Water/Wastewater 

2/2 Overview 

2/3 Benefits 

2/4 Application 

2/4 Design 

2/5 Function 

2/6 Integration 

2/8 Configuration 

2/10 Selection and ordering data 

2/10 • SINAMICS G120X converters · 

Degree of protection IP20/UL Open Type · 

200 ... 240 V 3 AC 

2/11 - Configuration with line-side 

components 

2/13 - Configuration with load-side power 

components 



380 ... 480 V 3 AC 


components 


components 



500 ... 690 V 3 AC 


components 


components 

2/22 • Supplementary system components 

and spare parts for SINAMICS G120X 

converters 

2/23 Technical specifications 

2/46 Characteristic curves 

2/51 Dimensional drawings 

2/51 More information 

2/52 Supplementary system components 

2/52 Operator Panels 

2/53 • IOP-2 Intelligent Operator Panel 

2/56 • BOP-2 Basic Operator Panel 

2/57 Memory cards 

2/58 SINAMICS G120 Smart Access 

2/59 SINAMICS CONNECT 300 IoT Gateway 

2/60 SINAMICS G120X I/O Extension Module 

2/61 Push-through mounting frames 

for frame sizes FSA to FSG 

2/61 IP21 top covers 

for frame sizes FSA to FSG 

2/62 Wiring adapter for frame size FSG 

2/63 Installation kit for line-side cable 

connection, left, for frame size FSH 

2/63 Spare parts 

2/63 FPI board for frame sizes FSH and FSJ 

2/63 PSB board for frame sizes FSH and FSJ 

2/63 Current transformers 

for frame sizes FSH and FSJ 

2/64 Spare parts kit for Control Unit 

2/64 Shield connection kit for Control Unit 

2/64 Shield connection kits for Power Module 

2/64 Small parts assembly set 

for frame sizes FSD to FSG 

2/65 Terminal cover kits 

for frame sizes FSD to FSG 

2/65 Fan units 

2/65 Control Units 

Further information about SINAMICS G120X 

can be found on the Internet at 


Update 08/2020 




0.75 kW to 630 kW (1 hp to 700 hp) 


2 

■ Overview 

SINAMICS G120X, frame sizes FSA to FSJ, degree of protection IP20, 

with IOP-2 Intelligent Operator Panel 

Easy handling, utmost reliability, superior efficiency and advanced 

digitalization - Siemens offers an answer to these trends 

with the SINAMICS G120X converter series. SINAMICS G120X is 

an innovative and user-friendly converter series that has been 

specifically developed for applications performed in infrastructure 

environments such as water/wastewater, but also for tasks 

in building automation. In this context, the converter supports, 

for example, pump, fan and compressor applications through 

numerous integrated functionalities and combines these in one 

device for the target sectors. 

The SINAMICS G120X converter is an integrated and efficient 

drive solution for a wide range of tasks. The system allows convenient 

handling through optimized user interfaces: IOP-2 Intelligent 

Operator Panel with graphic color display and the optional 

web server module SINAMICS G120 Smart Access - a Wi-Fibased 

web server solution. Thus, the SINAMICS G120X fulfils 

the request for an easy and fast setup of the devices during the 

commissioning phase. Further, experienced users can use the 

full flexibility of a SINAMICS converter and adjust the relevant 

application to their requirements. 

Totally integrated operation - this approach is also supported 

from ordering through to delivery. 

For example, all the major features of the converter are configured 

and displayed in the article number. The delivery includes 

the complete device - as configured - that means, the converter 

and the selected operator panel. 

In addition, SINAMICS G120X has an extremely rugged and reliable 

construction. The integrated DC link reactor with a maximum 

output of 250 kW and optional resistance to harmful gases 

up to environmental class 3C3 ensure a reliable, stable and 

largely robust operation. 

The converter system is fit for digitalization. Thanks to its full integration 

in the SINAMICS CONNECT 300 system, data from up 

to eight converters can be acquired and transferred to the 


"Analyze MyDrives" facilitates the evaluation of data - tailored to 



Further, the SINAMICS G120X converter series provides innovative 

hardware and software functions, e.g. for controlling synchronous 

reluctance drive systems with SIMOTICS reluctance 

motors. In this way, the SINAMICS G120X converter series 

makes a substantial contribution towards saving energy and 

makes more careful use of our natural resources. 

Portfolio range 

The SINAMICS G120X converter series with degree of protection 

IP20/UL Open Type offers a seamless system approach in three 

different voltage rangeswith wide options of built-in communication 

interfaces including PROFINET, EtherNet/IP, USS, 

Modbus RTU, BACnet MS/TP and PROFIBUS DP: 



• 500 V to 690 V 3 AC: 3 kW to 630 kW (4 hp to 700 hp) 

User-friendliness 

A high degree of user-friendliness is one of the main characteristics 

of the SINAMICS G120X: 

• Operator panel with color display and extensive diagnostics 

functions (IOP-2 Intelligent Operator Panel) 

• Two different setup options are available: Standard and quick 

start with graphical user guidance 

• Optimized setups for pumps and fans in the web server module 


• SINAMICS SD card for storing parameter settings, cloning 

and local commissioning 

Integrated functionalities for the start/operational/stop 

phases of the application 

SINAMICS G120X is always preset, depending on the selected 

converter performance. Further, the following functions can be 

easily selected and parameterized: 

Start phase 

During the start phase, the following functions are supported by 

default: 

• Deragging mode for pumps for cleaning the pump system, improving 

efficiency and reducing wear 

• Pipe filling mode for preventing pressure shocks in pipeline 

systems 

• Two acceleration ramps for shorter start/stop times 

• Flying restart of the running motor for fast hot restart 

• Automatic restart function after power failure during short 

downtimes 

Operating phase 

During the operating phase, the following functions are supported 

by default: 

• Continued run mode with autonomous reduction of output and 

pulse frequency 

• PID controller for autonomous closed-loop control mode, operated 

according to analog input values 

• Up to 16 variable-speed setpoints as fixed frequencies 

• Speed monitoring via sensor (pulse input) 

• Multi-pump control of up to four pumps 

• Protection against blocking, leakage, dry running and 

cavitation 

• Fire response mode for extended operation in case of emergency 

• Skip frequencies for skipping critical frequencies and avoiding 

vibration 

• Real time clock for switching over setpoints or controlling releases 

Stop phase 

During the stop phase, the following functions are supported by 

default: 

• STO (Safe Torque Off) according to IEC 61508 SIL 3 and 

EN ISO 13489-1 PL e and Category 3. 

External components (e.g. safety relays) are necessary for using 

the STO safety function. 

• ON/OFF2 for an optimized braking ramp 

• Condensation protection for the motor 

• Frost protection function for the pump 

A detailed description of the functions and connection diagrams 

are included in the device documentation. 





0.75 kW to 630 kW (1 hp to 700 hp) 

■ Overview 

Commissioning of complex applications 

Sample applications, which include the description and device 

setting, are provided for SINAMICS G120X. 

The following application descriptions are available: 

• Fan for exhaust air with closed-loop control of pressure and air 

quality 

• Fan for cooling tower with closed-loop control of the cooling 

water temperature 

• Fan for tunnel/parking garage with closed-loop control of air 

quality and essential service mode 

• Fan for supply air with closed-loop control of pressure, temperature, 

air quality and flowrate 

• Pumps with closed-loop control of the pressure 

• Pumps with closed-loop control of the filling level 

• Pumps for cooling circuits with closed-loop control of the temperature 

• Compressor with closed-loop control of the pressure 

• Vacuum pump with closed-loop control of the pressure 

Practical application examples and descriptions are available 



■ Benefits 

Energy efficiency 

SINAMICS G120X increases the efficiency and minimizes energy 

consumption in the complete process chain. The converter 

has integrated hardware as well as software functions as standard. 

The main features are: 

• Power units with DC link reactor for extremely high active 

power component thanks to efficient converter topology - for 

the same drive power, the converter requires a lower line current 

than comparable converters 

• Flux reduction through automatic adaptation of the motor current 

to the prevailing load conditions with closed-loop control 

modes V/f (ECO) and vector without sensor (SLVC) and savings 

of up to 5 % under partial load conditions 

• Hibernation mode dependent on setpoints in the process 

• High efficiency ≥ 98 % 

Application-specific commissioning and operation using 

operator panel 

• Local commissioning without specialized knowledge of converters 

thanks to default settings and graphical user interface 

• Unique: SINAMICS SD memory card for pre-parameterization 

and cloning of converter data sets 

• Data backup for easy replacement 

• Commissioning/diagnostics and controlling of converters 

Flexible deployment of integrated functions 

• PLC functions for local control tasks for frame sizes FSA to 

FSG 

Flexible use of integrated function blocks 

No need for additional, external components 

• Four integrated PID controllers 

Distributed closed-loop control for motor-independent process 

control without higher-level controller (PLC) 

• Three freely programmable digital timer switches 

Control for freely selectable daily and weekly programs 


Flexible deployment across a wide range of applications 

• Isolated digital inputs with separate potential group 

• Isolated analog inputs 

- Potential transfer avoided 

- EMC-compliant design without the need for additional components 

in line with process industry requirements 

• Direct connection of Pt1000/Ni1000 temperature sensors with 

optional SINAMICS G120X I/O Extension Module 

• Connection and evaluation of a recommended, optional Pt100 

temperature sensor by using a free analog input and output 

• 2/3-wire control for static/pulsed signals for universal control 

via digital inputs 

• 230 V AC relay 

- Direct control for auxiliary equipment, e.g. reactor or valve 

actuators 

• Safety functions 

- Terminals for controlling the STO (Safe Torque Off) Safety 

function according to IEC 61508 SIL 3 and EN ISO 13489-1 

PL e and Category 3. 

External components (e.g. safety relays) are necessary for 

using the STO safety function. 

For further information see the operating instructions 

www.siemens.com/sinamics-g120x/documentation 

• X9 terminal strip for devices in frame sizes FSH and FSJ 

(315 kW to 630 kW) 

- Input for external 24 V DC supply 

- Input for external alarm/fault 

- Input for EMERGENCY OFF/EMERGENCY STOP 

- Output for 24 V DC 

- Control of the main contactor 

- Feedback message "DC link charged" 

• Use of the communication versions at ambient 

temperatures of 

- -20 °C to +55 °C: PROFINET, EtherNet/IP 

- -20 °C to +60 °C: PROFIBUS DP, USS, Modbus RTU, BACnet 

MS/TP 

• Removable operator panel 

- Protection against unauthorized access 

- Color-coded signaling of operating states 

• Replacement of individual components without the need for 

reinstallation 

- Plug-in version of control terminals (for replacement without 

removing wiring) 

• Version for harsh environmental conditions 

- Coated modules for increased resistance to humidity and 

dust (Class 3C2) 

- PCB coating for environmental class/harmful chemical substances 

Class 3C3 acc. to IEC 60721-3-3: 2002 

Extended warranty 

Siemens offers for SINAMICS G120X an extended warranty 

up to 7½ years: 

• 24 months of standard warranty 

• Optional extension via Service Protect 

- 6 months free of charge after product registration at: 

https://myregistration.siemens.com 

- chargeable for additional 3 or 5 years 

More information at: 

https://support.industry.siemens.com/cs/ww/en/sc/4842 

2 



2/3



0.75 kW to 630 kW (1 hp to 700 hp) 

2 


■ Application 

The specialist for pump, fan and compressor applications 

SINAMICS G120X is ideally suited to pump applications (centrifugal 

pumps, oscillating and rotating pumps), fan applications 

(axial and radial fans) and compressor applications (cooling 

compressors, air and gas compressors). They are deployed in 

the water/waste water industries, in industrial environments, and 

in building automation. 

SINAMICS G120X is ideally suited for the following applications: 

• Circulating pumps for heating and cooling systems 

• Pumps for pressure boosting stations 

• Level control 

• Fans in cooling towers 

• Fans for air intake and discharge 

• Fans for tunnels and multi-story car parks 

• Fans for stairwells 

• Compressors for cooling units 

Reliable operation in harsh environments 

SINAMICS G120X is suitable for use under harsh environmental 

conditions: 

• Degree of protection IP20/UL Open Type for use in the control 

cabinet 

• Degree of protection IP21 with optional IP21 top cover for use 

in lockable control rooms, including outside a control cabinet 

• Degree of protection IP20 with optional push-through mounting 

frame for space-saving design when installed in the control 

cabinet; power losses are dissipated using an external 

heat sink, separate internal air circulation 

• Use of the communication versions at ambient 

temperatures of 

- -20 °C to +55 °C: PROFINET, EtherNet/IP 

- -20 °C to +60 °C: PROFIBUS DP, USS, Modbus RTU, BACnet 

MS/TP 

• Coated modules for increased resistance to humidity and dust 

(Class 3C2) 

• Optional for environmental class/harmful chemical substances 


■ Design 

SINAMICS G120X is a converter system that comprises a power 

output module and a control module with or without an operator 

panel. 

The converter is configured on the basis of the power requirement 

and the application. State-of-the-art IGBT technology with 

pulse-width modulation is used for reliable and flexible motor operation. 

Comprehensive protection functions provide a high degree 

of protection for the converter and motor. 

The SINAMICS G120X converters in degree of protection IP20 

are intended for installation in a control cabinet. 

• Selection of the line filter for line voltage 200 V to 240 V 3 AC 

- Without integrated line filter, 0.75 kW to 55 kW 


- Without integrated line filter, 0.75 kW to 132 kW 

- With integrated line filter Category C2, 0.75 kW to 250 kW 

- With integrated line filter Category C3, 160 kW to 560 kW 

- With additional line filter Category C1 for unfiltered devices, 

0.75 kW to 110 kW 

- With additional line filter Category C2 for filtered devices, 

315 kW to 560 kW 


- Without integrated line filter, 3 kW to 132 kW 



- With additional line filter Category C2 for filtered devices, 

315 kW to 630 kW 

• Environmental class/harmful chemical substances acc. to IEC 

60721-3-3: 2002 

- Class 3C2 

-Class3C3 

• Selection of communication 

- PROFINET, EtherNet/IP 

- PROFIBUS 

- USS, Modbus RTU, BACnet MS/TP 

• Selection of the operator panel 

The operator panels support user-friendly local commissioning, 

control and diagnostics and enable complete converter 

data sets to be pre-parameterized and cloned. 

- Without operator panel 

- BOP-2 Basic Operator Panel 

The menu prompting and the 2-line display allow for simple 

commissioning of the converter. Simultaneous display of the 

parameter and parameter value, as well as parameter filtering, 

means that basic commissioning of a drive can also be 

performed without a printed parameter list. 

- IOP-2 Intelligent Operator Panel 

Supports entry-level personnel as well as drive experts. 

Thanks to the color display, a user-friendly menu structure 

and wizards, it is much easier to commission, diagnose and 

locally control standard drives. 

Line-side power components 

The following line-side power components are available for the 

SINAMICS G120X converters: 

• Line filters for categories C1, C2 and C3, see above 

With an additional line filter, the converter complies with a 

higher radio interference class. 

• Line harmonics filters for frame sizes FSB from 5.5 kW to FSG 

up to 250 kW 

The use of a line harmonics filter enables a significant reduction 

in unwanted harmonics. This means that a THD (I) value 

of less than 5 % can be achieved and compliance with the 

limit values according to IEC 61000-3-12, IEC 61000-2-2 and 

IEEE 519 is possible regardless of the network impedance. 

• Line reactors for devices from 315 kW and for frame sizes FSH 

and FSJ 

Line reactors smooth the current drawn by the converter and 

thus reduce harmonic components in the line current. Through 

the reduction of the current harmonics, the thermal load on the 

power components in the rectifier and in the DC link capacitors 

is reduced as well as the harmonic effects on the supply. 

The use of a line reactor increases the service life of the 

converter. 

SINAMICS G120X frame sizes FSA to FSG feature an integrated 

DC link reactor as standard. The use of an additional 

line reactor is not necessary for this. 

Recommended line-side overcurrent protection devices and 

power components 

This section contains recommendations for additional line-side 

components, such as Siemens fuses and circuit breakers (lineside 

components must be dimensioned in accordance with IEC 

standards). 

Additional information about the listed fuses and circuit breakers 

is available in the Catalogs LV 10, IC 10 and IC 10 AO as well as 

in the Industry Mall. 




0.75 kW to 630 kW (1 hp to 700 hp) 


■ Design 

Load-side power components 

Various load-side power components are available for the 

SINAMICS G120X converters. These allow the use of longer 

shielded motor cables and increase the motor service life: 

• Output reactors for frame sizes FSD to FSJ 

Output reactors reduce the rate of voltage rise (dv/dt) and the 

height of the current peaks, and can allow longer motor cables 

to be connected. 

• Sine-wave filters for frame sizes FSA to FSF 

Sine-wave filters limit the rate of voltage rise (dv/dt) and the 

peak voltages on the motor winding. Similar to an output reactor, 

they enable the connection of longer motor cables. 

• dv/dt filters plus VPL for frame sizes FSD to FSJ 

dv/dt filters plus VPL (Voltage Peak Limiter) limit the voltage 

rate-of-rise dv/dt to values of



0.75 kW to 630 kW (1 hp to 700 hp) 


■ Integration 

Memory 

card 

IOP-2 

BOP-2 

1 

+10 V OUT 

2 

GND 

2 

≥ 4.7 kΩ 

Pt100 

DI0 

DI1 

DI2 

DI3 

DI4 

DI5 

+ 

24 V 

5 

6 

7 

8 

16 

17 

69 

3 

4 

AI0- 

AI0+ 

AI0- 

3 

4 

5 

6 

7 

8 

9 

28 GND 

69 

AI0+ 

11 AI1- 

10 AI1+ 

DI0 

DI1 

DI2 

DI3 

16 DI4 

17 DI5 

+24 V OUT 

DI COM 

A 

A 

Digital inputs 

D 

D 

ON 

OFF 

DIP switch 

Analog inputs 

0 to 20 mA 

AI0 

AI1 

0 to 10 V 


Power Module 

L1 

IOP-2 

Handheld 

I/O Extension 

Module 

SINAMICS 

G120 

Smart 

Access 

PTC/KTY/ 

Pt1000 

0 to 10 V 

0 to 20 mA 

max. 500 Ω 

DO0 

DO1 

14 

15 

12 

13 

20 

19 

18 

25 

24 

23 

31 

32 

T1 MOTOR 

T2 MOTOR 

AO0+ 

GND 

COM 

NO 

NC 

COM 

NO 

NC 

+24 V IN 

GND IN 

A 

A 

D 

D 

from 

external 

source 

PM interface 

STO enable 

STO switches 

Line supply 

DC link 

Motor 

STO 

L2 

L3 

Ground 

R1 (FSA - FSG) 

DCP (FSH - FSJ) 

F3 (FSA - FSG) 

DCN (FSH - FSJ) 

U2 

V2 

W2 

Ground 

STO_A 24 V 

STO_A 0 V 

STO_B 24 V 

STO_B 0 V 

SINAMICS 

CONNECT 300 

IoT Gateway 

Communications 

interface 

G_D011_EN_00589b 

SINAMICS G120X connection diagram 




0.75 kW to 630 kW (1 hp to 700 hp) 



5 

X21 

4 

6 

2 

G_D011_EN_00591 

3 

2 

7 

X132 

X134 

1 

8 

X133 

9 

X126 / X128 / X150 

1 

2 

3 

4 

5 

6 

7 

9 

8 

Terminal strip 

Switch for AI 0 and AI 1 (I/V) 

Status LED 

Connection to Operator Panel, Smart Access or I/O Extension Module 

Memory card slot 

For mounting the I/O Extension Module 

Terminal strips 

Fieldbus interfaces on the bottom 

SINAMICS G120X interface overview 


2/7



0.75 kW to 630 kW (1 hp to 700 hp) 


2 

■ Configuration 

The following electronic configuring guides and engineering 

tools are available for SINAMICS G120X converters: 

SINAMICS SELECTOR app 

Mobile selection guide for frequency converters 

Siemens has developed the SINAMICS SELECTOR app as a 

practical tool for finding article numbers for your SINAMICS converters 

in the power range from 0.12 kW to 630 kW quickly and 

easily. Whether for SINAMICS V20, SINAMICS G120C, 

SINAMICS G120P, SINAMICS G120X or SINAMICS G120: 

The app will provide you with the correct article numbers 

conveniently. 

How does it work? Simply select your application, the frequency 

converter you require, the rated power and device options as 

well as the necessary accessories. 

Then you can save your selection and send it by email. Your preselection 

is the basis for an order specification with the 

dealer/Siemens. 

You will find the free downloads for Android and for iOS at the following 

link: 

www.siemens.com/sinamics-selector 

SINAMICS ASSISTANT app 

The error code function of the SINAMICS ASSISTANT app helps 

you to identify and rectify errors. Just enter the error code of your 

frequency converter and the app shows you what sort of error it 

is and how you can rectify it. 

This app also recalculates for you the frequency (Hz) of a frequency 

converter into the speed to be set on the motor (rpm) or 

vice versa. 

In addition, this app offers you a support page on which you can 

get in touch straight away with the right contact person in your 

region if you have any questions. Furthermore, video information 

is available to you free of charge, e.g. on installation and commissioning 

of the SINAMICS G120 frequency converter. 

You will find the free downloads for Android and for iOS at the following 

link: 

www.siemens.com/sinamics-assistant 

Drive Technology Configurator (DT Configurator) 

The DT Configurator can be used on the Internet without requiring 

any installation. The DT Configurator can be found in the Siemens 

Industry Mall at the following address: 

www.siemens.com/dt-configurator 

You can find further information on the Drive Technology 

Configurator (DT Configurator) in the Engineering tools section. 

TIA Selection Tool 

Selection tool and configurator for automation technology 

Flawless configuration without expert knowledge through intelligent 

configurators and selection wizards. Desktop and cloud 

versions enable cross-team work with maximum flexibility. 

There are two versions of the TIA Selection Tool: 

• One for downloading and executing on Windows PCs 

(from Microsoft Windows 7) 

• One for running from the cloud, which is launched from mobile 

devices directly in the browser 

(we recommend Safari, Chrome and Firefox) 

Projects stored in the cloud can be edited with both tools. This 

makes it possible to work on-the-go using a tablet, at home on a 

PC – and vice versa, or together with colleagues and customers. 

In order to use the full functionality, we recommended setting up 

a Siemens Industry Mall account for both cases. This gives you 

access to prices and enables you to save your projects to our 

cloud. 

You can find more information on the TIA Selection Tool at 

www.siemens.com/tia-selection-tool 

SIMARIS planning tools for plants with SINAMICS drives 

Electrical planning: Even easier with software! 

Electrical planning for power distribution in non-residential and 

industrial buildings has never been more complex. To ensure 

you, as a specialist planner, have the best hand when it comes 

to electrical planning with SINAMICS drives, we provide support 

with the following efficient software tools: SIMARIS design for dimensioning 

and SIMARIS project for calculating the space requirements 

of the distribution boards. 

You can find more information on the SIMARIS planning tools for 

plants with SINAMICS drives in the Engineering tools section. 

SinaSave energy efficiency tool (available soon) 

Use SinaSave to calculate potential energy savings 

The web-based tool SinaSave can be used to estimate the potential 

savings which can be achieved over the entire lifecycle, 

e.g. for pump and fan applications, thanks to SINAMICS. The 

tool takes into consideration all important plant-specific quantities, 

such as the power and load data of the application, the relevant 

control mode and the operation profile for the application 

in question. The result delivered by the tool specifies the potential 

energy savings which can be achieved with the specific application 

in conjunction with the Integrated Drive System or the 

drive component. The tool also provides a monetary evaluation 

of the potential savings and estimates the payback period. 

You can find more information about the amortization calculator 

for energy-efficient drive systems at 

www.siemens.com/sinasave 

You can find further information on the SinaSave energy 

efficiency tool in the Engineering tools section. 





0.75 kW to 630 kW (1 hp to 700 hp) 


■ Configuration 

SIZER for Siemens Drives engineering tool 

The SIZER for Siemens Drives engineering tool makes it easy to 

configure the SINAMICS converter family. It provides support 

when selecting the hardware and firmware components necessary 

to implement a drive task. SIZER for Siemens Drives is designed 

to support configuring of the entire drive system. 

The SIZER for Siemens Drives engineering tool is available free 


www.siemens.com/sizer 

You can find further information on the SIZER for Siemens Drives 

engineering tool in the Engineering tools section. 

Drive ES PCS 7 engineering system 

Drive ES PCS 7 integrates drives into the SIMATIC PCS 7 process 

control system. Drive ES PCS 7 provides a block library 

with blocks for the drives and the corresponding faceplates for 

the operator station. 

More information about the Drive ES engineering system is available 


www.siemens.com/drive-es 

SINAMICS web server for SINAMICS G120X via 


Web server for efficient commissioning, diagnostics and 

maintenance 

The optionally available SINAMICS G120 Smart Access provides 

the SINAMICS G120X drive system with a web server for 

efficient commissioning, diagnostics and maintenance. The web 

server provides access to a multi-faceted range of new options 

for parameter assignment and drive diagnostics for laptops, tablets 

and smartphones. 

You can find further information on the SINAMICS web server for 

SINAMICS G120X via SINAMICS G120 Smart Access in the 

Engineering tools section. 

2 


2/9



0.75 kW to 630 kW (1 hp to 700 hp) 

Clicking to the Industry Mall 

6SL3255-0AA00-5AA0 



NEW NEU 

SINAMICS G120X converters · Degree of protection IP20/UL Open Type · 200 ... 240 V 3 AC ➡ Configuration with line-side components (see right page) 

Rated power 1) Rated output current 2) Base-load current 

I 3) 

H 

Rated input 

current 4) Frame size SINAMICS G120X 

Degree of protection 

IP20/UL Open Type 

without integrated line filter 

2 

200 V 240 V 200 V 240 V 200 V 240 V 200 V 

kW hp A A A A A Article No. 

200 ... 240 V 3 AC · Rated pulse frequency 4 kHz · Input frequency 47 ... 63 Hz 

0.75 1 4.2 4.2 3.2 3.2 3.8 FSA 6SL32 ■ 0- ■ YC10- ■ U ■ 0 

1.1 1.5 6 6 4.2 4.2 5.4 FSA 6SL32 ■ 0- ■ YC12- ■ U ■ 0 

1.5 2 7.4 7.4 6 6 6.7 FSA 6SL32 ■ 0- ■ YC14- ■ U ■ 0 

2.2 3 10.4 10.4 7.4 7.4 9.6 FSB 6SL32 ■ 0- ■ YC16- ■ U ■ 0 

3 4 13.6 13.6 10.4 10.4 12.7 FSB 6SL32 ■ 0- ■ YC18- ■ U ■ 0 

4 5 17.5 17.5 13.6 13.6 16.3 FSB 6SL32 ■ 0- ■ YC20- ■ U ■ 0 

5.5 7.5 22 22 17.5 17.5 20.8 FSC 6SL32 ■ 0- ■ YC22- ■ U ■ 0 

7.5 10 28 28 22 22 26.3 FSC 6SL32 ■ 0- ■ YC24- ■ U ■ 0 

11 15 42 42 28 28 40 FSD 6SL32 ■ 0- ■ YC26- ■ U ■ 0 

15 20 54 54 42 42 51 FSD 6SL32 ■ 0- ■ YC28- ■ U ■ 0 

18.5 25 68 68 54 54 64 FSD 6SL32 ■ 0- ■ YC30- ■ U ■ 0 

22 30 80 80 68 68 76 FSE 6SL32 ■ 0- ■ YC32- ■ U ■ 0 

30 40 104 104 80 80 98 FSE 6SL32 ■ 0- ■ YC34- ■ U ■ 0 

37 50 130 130 104 104 126 FSF 6SL32 ■ 0- ■ YC36- ■ U ■ 0 

45 60 154 154 130 130 149 FSF 6SL32 ■ 0- ■ YC38- ■ U ■ 0 

55 75 192 192 154 154 172 FSF 6SL32 ■ 0- ■ YC40- ■ U ■ 0 

Article No. supplements 

Environmental class/harmful chemical substances acc. to IEC 60721-3-3: 2002 

Class 3C2 2 

Class 3C3 3 

Operator Panel 

Without Operator Panel 1 

With BOP-2 Basic Operator Panel (numeric 2-line display) 2 

With IOP-2 Intelligent Operator Panel (graphic color display) 3 

Extension with SINAMICS G120X I/O Extension Module 

Without extension 0 

With SINAMICS G120X I/O Extension Module 1 

Line filter 

Without integrated line filter 

U 

Communication 

USS, Modbus RTU, BACnet MS/TP 

B 

PROFINET, EtherNet/IP 

F 

PROFIBUS DP 

P 

1) Rated power based on the base-load current I L . The base-load current I L 

is based on the duty cycle for low overload (LO). 

2) The rated output current is based on the duty cycle for low overload (LO). 

These current values are valid for 200 V or 240 V. 

3) The base-load current I H is based on the duty cycle for high overload (HO). 


4) The input current depends on the motor load and line impedance. 

The input currents apply for a load at rated power (based on I L ) for a line 

impedance corresponding to u K = 1 %. The current values are specified on 

the rating plate of the converter. 




6SL3255-0AA00-5AA0 


0.75 kW to 630 kW (1 hp to 700 hp) 


Line-side components (Configuration with load-side power components see next double page) 

Line filters Line harmonics filters Line reactors Recommended line-side 

Category C2 

Category C1 

overcurrent protection devices 1) 

Fuses 

IEC-compliant 

Fuses 

UL/cUL-compliant 

Rated voltage 

600 V AC 2) 

Current Fuse type Current 

Article No. Article No. Article No. A Article No. Class/Article No. A 

– – – A DC line reactor 16 3NA3805 J 15 

– – – is integrated for 16 3NA3805 J 15 

frame sizes 

– – – 

FSA to FSF – 

16 3NA3805 J 15 

– – – therefore no 

32 3NA3812 J 35 

– – – line reactor 

32 3NA3812 J 35 

is required. 

– – – 32 3NA3812 J 35 

– – – 50 3NA3820 J 50 

– – – 50 3NA3820 J 50 

– – – 63 3NA3822 J 60 

– – – 80 3NA3824 J 70 

– – – 100 3NA3830 J 90 

– – – 100 3NA3830 J 110 

– – – 160 3NA3836 J 150 

– – – 200 3NA3140 J 175 

– – – 200 3NA3140 J 200 

– – – 224 3NA3142 J 250 

2 

1) Further information at 


2) The Short Circuit Current Rating (SCCR) according to UL for industrial control 

panel installations to NEC Article 409 or UL 508A/508C or UL 61800-5-1 

is 100 kA for SINAMICS G120X. 


2/11



0.75 kW to 630 kW (1 hp to 700 hp) 


6SL3255-0AA00-5AA0 



NEW NEU 

SINAMICS G120X converters · Degree of protection IP20/UL Open Type · 200 ... 240 V 3 AC ➡ Configuration with load-side power components (see right page) 


I 3) 

H 

Rated input 

current 4) Frame size SINAMICS G120X 




2 

200 V 240 V 200 V 240 V 200 V 240 V 200 V 

kW hp A A A A A Article No. 


0.75 1 4.2 4.2 3.2 3.2 3.8 FSA 6SL32 ■ 0- ■ YC10- ■ U ■ 0 

1.1 1.5 6 6 4.2 4.2 5.4 FSA 6SL32 ■ 0- ■ YC12- ■ U ■ 0 

1.5 2 7.4 7.4 6 6 6.7 FSA 6SL32 ■ 0- ■ YC14- ■ U ■ 0 

2.2 3 10.4 10.4 7.4 7.4 9.6 FSB 6SL32 ■ 0- ■ YC16- ■ U ■ 0 

3 4 13.6 13.6 10.4 10.4 12.7 FSB 6SL32 ■ 0- ■ YC18- ■ U ■ 0 

4 5 17.5 17.5 13.6 13.6 16.3 FSB 6SL32 ■ 0- ■ YC20- ■ U ■ 0 

5.5 7.5 22 22 17.5 17.5 20.8 FSC 6SL32 ■ 0- ■ YC22- ■ U ■ 0 

7.5 10 28 28 22 22 26.3 FSC 6SL32 ■ 0- ■ YC24- ■ U ■ 0 

11 15 42 42 28 28 40 FSD 6SL32 ■ 0- ■ YC26- ■ U ■ 0 

15 20 54 54 42 42 51 FSD 6SL32 ■ 0- ■ YC28- ■ U ■ 0 

18.5 25 68 68 54 54 64 FSD 6SL32 ■ 0- ■ YC30- ■ U ■ 0 

22 30 80 80 68 68 76 FSE 6SL32 ■ 0- ■ YC32- ■ U ■ 0 

30 40 104 104 80 80 98 FSE 6SL32 ■ 0- ■ YC34- ■ U ■ 0 

37 50 130 130 104 104 126 FSF 6SL32 ■ 0- ■ YC36- ■ U ■ 0 

45 60 154 154 130 130 149 FSF 6SL32 ■ 0- ■ YC38- ■ U ■ 0 

55 75 192 192 154 154 172 FSF 6SL32 ■ 0- ■ YC40- ■ U ■ 0 



Class 3C2 2 

Class 3C3 3 


Without Operator Panel 1 




Without extension 0 

With SINAMICS G120X I/O Extension Module 1 

Line filter 


U 

Communication 


B 

PROFINET, EtherNet/IP 

F 

PROFIBUS DP 

P 














6SL3255-0AA00-5AA0 


0.75 kW to 630 kW (1 hp to 700 hp) 


Load-side power components (Configuration with line-side components see double page before) 

Output reactors Sine-wave filters dv/dt filters plus VPL 

Article No. Article No. Article No. 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

– – – 

2 

Ordering examples 

Basic selection Example 1 Example 2 

SINAMICS G120X converters · degree of protection IP20/UL Open Type · 200 ... 240 V 3 AC, 6SL32 ■ 0- ■ YC28- ■ U ■ 0 6SL32 ■ 0- ■ YC28- ■ U ■ 0 

15 kW · without integrated line filter 



Class 3C2 2 

Class 3C3 3 





Without extension 0 0 

With SINAMICS G120X I/O Extension Module 

Line filter 

Without integrated line filter U U 

Communication 


PROFINET, EtherNet/IP F F 

PROFIBUS DP 

Complete Article No. 6SL32 2 0- 3 YC28- 0 U F 0 6SL32 3 0- 2 YC28- 0 U F 0 


2/13



0.75 kW to 630 kW (1 hp to 700 hp) 


6SL3255-0AA00-5AA0 



2 



I 3) 

H 

Rated 

input 

current 4) 

400 V 480 V 400 V 480 V 400 V 480 V 400 V 

Frame size SINAMICS G120X 




Converters up to 132 kW 

delivery ex stock 

10 ... 

48 




with integrated line filter 



10 ... 

48 

kW hp A A A A A Article No. Article No. 

380 ... 480 V 3 AC · Rated pulse frequency 4 kHz 90 kW and 2 kHz 110 kW · Input frequency 47 ... 63 Hz 

0.75 1 2.2 2.1 1.7 1.6 2.1 FSA 6SL32 ■ 0- ■ YE10- ■ U ■ 0 6SL32 ■ 0- ■ YE10- ■ A ■ 0 

1.1 1.5 3.1 3 2.2 2.1 2.8 FSA 6SL32 ■ 0- ■ YE12- ■ U ■ 0 6SL32 ■ 0- ■ YE12- ■ A ■ 0 

1.5 2 4.1 3.4 3.1 3 3.6 FSA 6SL32 ■ 0- ■ YE14- ■ U ■ 0 6SL32 ■ 0- ■ YE14- ■ A ■ 0 


3 4 7.7 6.2 5.9 4.8 6.9 FSA 6SL32 ■ 0- ■ YE18- ■ U ■ 0 6SL32 ■ 0- ■ YE18- ■ A ■ 0 

4 5 10.2 7.6 7.7 6.2 9.8 FSB 6SL32 ■ 0- ■ YE20- ■ U ■ 0 6SL32 ■ 0- ■ YE20- ■ A ■ 0 

5.5 7.5 13.2 11 10.2 7.6 12 FSB 6SL32 ■ 0- ■ YE22- ■ U ■ 0 6SL32 ■ 0- ■ YE22- ■ A ■ 0 

7.5 10 18 14 13.2 11 17 FSB 6SL32 ■ 0- ■ YE24- ■ U ■ 0 6SL32 ■ 0- ■ YE24- ■ A ■ 0 

11 15 26 21 18 14 24.5 FSC 6SL32 ■ 0- ■ YE26- ■ U ■ 0 6SL32 ■ 0- ■ YE26- ■ A ■ 0 


18.5 25 38 34 32 27 36 FSD 6SL32 ■ 0- ■ YE30- ■ U ■ 0 6SL32 ■ 0- ■ YE30- ■ A ■ 0 

22 30 45 40 38 34 42 FSD 6SL32 ■ 0- ■ YE32- ■ U ■ 0 6SL32 ■ 0- ■ YE32- ■ A ■ 0 



45 60 90 77 75 65 86 FSE 6SL32 ■ 0- ■ YE38- ■ U ■ 0 6SL32 ■ 0- ■ YE38- ■ A ■ 0 


75 100 145 124 110 96 140 FSF 6SL32 ■ 0- ■ YE42- ■ U ■ 0 6SL32 ■ 0- ■ YE42- ■ A ■ 0 




160 250 302 302 250 240 301 FSG – 6SL32 ■ 0- ■ YE50- ■ ■ ■ 0 

200 300 370 361 302 302 365 FSG – 6SL32 ■ 0- ■ YE52- ■ ■ ■ 0 

250 400 477 477 370 361 471 FSG – 6SL32 ■ 0- ■ YE54- ■ ■ ■ 0 

315 400 570 477 468 390 585 FSH – 6SL32 2 0- ■ YE56- ■ C ■ 0 

355 450 640 515 491 394 654 FSH – 6SL32 2 0- ■ YE58- ■ C ■ 0 

400 500 720 590 551 452 735 FSH – 6SL32 2 0- ■ YE60- ■ C ■ 0 

450 500 820 663 672 542 850 FSJ – 6SL32 2 0- ■ YE62- ■ C ■ 0 

500 600 890 724 728 591 924 FSJ – 6SL32 2 0- ■ YE64- ■ C ■ 0 

560 700 1000 830 786 652 1038 FSJ – 6SL32 2 0- ■ YE66- ■ C ■ 0 



Class 3C2 – delivery ex stock 2 2 

Class 3C3 * 3 3 


Without Operator Panel * 1 1 

With BOP-2 Basic Operator Panel (numeric 2-line display) * 2 2 

With IOP-2 Intelligent Operator Panel (graphic color display) – delivery ex stock 3 3 


Without extension – delivery ex stock 0 0 

With SINAMICS G120X I/O Extension Module * 1 1 

NEW NEU 

Line filter 

Without integrated line filter – delivery ex stock 

U 

With integrated line filter Category C2 – delivery ex stock 

A 

With integrated line filter Category C3 * 

C 

Communication 

USS, Modbus RTU, BACnet MS/TP * B B 

PROFINET, EtherNet/IP – delivery ex stock F F 

PROFIBUS DP * P P 

* If you select one of these supplements, the delivery time for converters up to 132 kW will change from "delivery ex stock" to "standard delivery time". 














6SL3255-0AA00-5AA0 


0.75 kW to 630 kW (1 hp to 700 hp) 



Line filters 

Category C2 Category C1 

Line harmonics filters 1) 

(THD(I) < 5 %) 

Line reactors 

For frame sizes 

Mandatory for 

•FSA to FSF 90 kW: 

Converter without integrated 

line filter 

• FSF 110 kW: 

Converter with integrated 

line filter 

FSH and FSJ 

mandatory when using 

an external 

line filter Category C2 

Recommended line-side 

overcurrent protection devices 4) 

Fuses 

IEC-compliant 

Fuses 


Rated voltage 

600 V AC 5) 


Article No. Article No. Article No. A Article No. Class/Article No. A 


available with 

integrated line filter 

Category C2 

6SL3203-0BE17-7BA1 

6) 


6) 


6) 

– A DC line reactor 16 3NA3805 J 15 

– is integrated for 16 3NA3805 J 15 

frame sizes 

– 

FSA to FSG – 

16 3NA3805 J 15 

– therefore no 

16 3NA3805 J 15 

– line reactor 

16 3NA3805 J 15 

is required. 

– 32 3NA3812 J 35 

UAC:FN34406112E2XXJRX 32 3NA3812 J 35 

UAC:FN34408112E2XXJRX 32 3NA3812 J 35 

UAC:FN344011113E2FAJRX 50 3NA3820 J 50 


6SL3203-0BE23-8BA0 UAC:FN344019113E2FAJRX 63 3NA3822 J 60 


6SL3203-0BE27-5BA0 UAC:FN344030115E2FAJRX 100 3NA3830 J 90 

UAC:FN344037115E2FAJRX 100 3NA3830 J 100 



6SL3000-0BE31-2DA0 UAC:FN344075116E2FAJRX 200 3NA3140 J 200 



– UAC:FN3440132118E2FAJXX 315 3NA3252 J 350 

– UAC:FN3440160118E2FAJXX 2) 355 3NA3254 J 400 

– UAC:FN3440200118E2FAJXX 2) 400 3NA3260 J 500 

– UAC:FN3440132118E2FAJXX (2×) 2) 3) 630 3NA3372 J 600 

6SL3760-0MR00-0AA0 – – 6SL3000-0CE36-3AA0 710 3NE1437-2 710 

– – 6SL3000-0CE37-7AA0 800 3NE1438-2 800 

– – 850 3NE1448-2 850 

– – 6SL3000-0CE38-7AA0 1000 3NB3350-1KK26 1000 

– – 6SL3000-0CE41-0AA0 1100 3NB3351-1KK26 1100 

– – 1250 3NB3352-1KK26 1250 

2 

1) Voltage 380 V to 415 V, frequency 50 Hz. 

2) For 160 kW, 200 kW and 250 kW, only operation in Vector Control is 

permitted. V/f must not be used. 

3) 250 kW with parallel connection of 2x 132 kW. 






6) The line filters are suitable for base mounting for SINAMICS G120X frame 

sizes FSA to FSC. Further information especially to achieve EMC Category 

C1 is available in the documentation on the Internet at: 




2/15



0.75 kW to 630 kW (1 hp to 700 hp) 


6SL3255-0AA00-5AA0 



2 



I 3) 

H 

Rated 

input 

current 4) 













400 V 480 V 400 V 480 V 400 V 480 V 400 V 

10 ... 

48 

10 ... 

48 

kW hp A A A A A Article No. Article No. 

380 ... 480 V 3 AC · Rated pulse frequency 4 kHz 90 kW and 2 kHz 110 kW · Input frequency 47 ... 63 Hz 


1.1 1.5 3.1 3 2.2 2.1 2.8 FSA 6SL32 ■ 0- ■ YE12- ■ U ■ 0 6SL32 ■ 0- ■ YE12- ■ A ■ 0 

1.5 2 4.1 3.4 3.1 3 3.6 FSA 6SL32 ■ 0- ■ YE14- ■ U ■ 0 6SL32 ■ 0- ■ YE14- ■ A ■ 0 


3 4 7.7 6.2 5.9 4.8 6.9 FSA 6SL32 ■ 0- ■ YE18- ■ U ■ 0 6SL32 ■ 0- ■ YE18- ■ A ■ 0 

4 5 10.2 7.6 7.7 6.2 9.8 FSB 6SL32 ■ 0- ■ YE20- ■ U ■ 0 6SL32 ■ 0- ■ YE20- ■ A ■ 0 

5.5 7.5 13.2 11 10.2 7.6 12 FSB 6SL32 ■ 0- ■ YE22- ■ U ■ 0 6SL32 ■ 0- ■ YE22- ■ A ■ 0 

7.5 10 18 14 13.2 11 17 FSB 6SL32 ■ 0- ■ YE24- ■ U ■ 0 6SL32 ■ 0- ■ YE24- ■ A ■ 0 



18.5 25 38 34 32 27 36 FSD 6SL32 ■ 0- ■ YE30- ■ U ■ 0 6SL32 ■ 0- ■ YE30- ■ A ■ 0 










160 250 302 302 250 240 301 FSG – 6SL32 ■ 0- ■ YE50- ■ ■ ■ 0 

200 300 370 361 302 302 365 FSG – 6SL32 ■ 0- ■ YE52- ■ ■ ■ 0 

250 400 477 477 370 361 471 FSG – 6SL32 ■ 0- ■ YE54- ■ ■ ■ 0 

315 400 570 477 468 390 585 FSH – 6SL32 2 0- ■ YE56- ■ C ■ 0 

355 450 640 515 491 394 654 FSH – 6SL32 2 0- ■ YE58- ■ C ■ 0 

400 500 720 590 551 452 735 FSH – 6SL32 2 0- ■ YE60- ■ C ■ 0 

450 500 820 663 672 542 850 FSJ – 6SL32 2 0- ■ YE62- ■ C ■ 0 

500 600 890 724 728 591 924 FSJ – 6SL32 2 0- ■ YE64- ■ C ■ 0 

560 700 1000 830 786 652 1038 FSJ – 6SL32 2 0- ■ YE66- ■ C ■ 0 



Class 3C2 – delivery ex stock 2 2 

Class 3C3 * 3 3 


Without Operator Panel * 1 1 

With BOP-2 Basic Operator Panel (numeric 2-line display) * 2 2 

With IOP-2 Intelligent Operator Panel (graphic color display) – delivery ex stock 3 3 



With SINAMICS G120X I/O Extension Module * 1 1 

NEW NEU 

Line filter 

Without integrated line filter – delivery ex stock 

U 

With integrated line filter Category C2 – delivery ex stock 

A 

With integrated line filter Category C3 * 

C 

Communication 

USS, Modbus RTU, BACnet MS/TP * B B 


PROFIBUS DP * P P 















6SL3255-0AA00-5AA0 


0.75 kW to 630 kW (1 hp to 700 hp) 



Output reactors 

Sine-wave filters 

When using sine-wave filters, 

please note for the pulse 

frequency of the converter: 

• 90 kW: 4 kHz up to 8 kHz 

• 110 kW: 4 kHz 

dv/dt filters plus VPL 


– 6SL3202-0AE20-3SA0 – 

– 6SL3202-0AE20-6SA0 – 

– – 

– 6SL3202-0AE21-1SA0 – 

– – 

– 6SL3202-0AE21-4SA0 – 

– 6SL3202-0AE22-0SA0 – 

– – 

– 6SL3202-0AE23-3SA0 – 

– – 

6SL3202-0AE23-8CA0 6SL3202-0AE24-6SA0 JTA:TEF1203-0HB 

6SE6400-3TC07-5ED0 

JTA:TEF1203-0JB 

6SL3202-0AE26-2SA0 

6SL3202-0AE28-8SA0 JTA:TEF1203-0KB 

6SE6400-3TC14-5FD0 

6SL3202-0AE31-5SA0 JTA:TEF1203-0LB 

2 

6SL3202-0AE31-8SA0 JTA:TEF1203-0MB 

6SL3000-2BE32-1AA0 6SL3000-2CE32-3AA0 1) 

6SL3000-2BE32-6AA0 

6SL3000-2BE33-2AA0 6SL3000-2CE32-8AA0 1) 2) 6SL3000-2DE35-0AA0 

6SL3000-2BE33-8AA0 6SL3000-2CE33-3AA0 1) 2) 

6SL3000-2BE35-0AA0 6SL3000-2CE34-1AA0 1) 2) 

6SL3000-2AE36-1AA0 – 6SL3000-2DE38-4AA0 

6SL3000-2AE38-4AA0 – 

– 

6SL3000-2AE41-0AA0 – 6SL3000-2DE41-4AA0 

– 

6SL3000-2AE41-4AA0 – 

Ordering examples 

Basic selection Example 1 Example 2 

SINAMICS G120X converters · degree of protection IP20/UL Open Type · 380 ... 480 V 3 AC, 6SL32 ■ 0- ■ YE28- ■ A ■ 0 6SL32 ■ 0- ■ YE28- ■ A ■ 0 

15 kW · with integrated line filter – converters up to 132 kW delivery ex stock 



Class 3C2 – delivery ex stock 2 

Class 3C3 * 3 


With BOP-2 Basic Operator Panel (numeric 2-line display) * 2 

With IOP-2 Intelligent Operator Panel (graphic color display) – delivery ex stock 3 



With SINAMICS G120X I/O Extension Module * 

Line filter 

With integrated line filter Category C2 – delivery ex stock A A 

Communication 

USS, Modbus RTU, BACnet MS/TP * 


PROFIBUS DP * 

Complete Article No. 6SL32 2 0- 3 YE28- 0 A F 0 6SL32 3 0- 2 YE28- 0 A F 0 

Delivery ex stock 

Standard delivery time 


1) For converters with a rated power 110 kW, around 70 % of the current 

and power is still available when using sine-wave filters due to current 

derating of the converter. 

2) For 160 kW, 200 kW and 250 kW, only operation in Vector Control is 

permitted. V/f must not be used. 


2/17



0.75 kW to 630 kW (1 hp to 700 hp) 


6SL3255-0AA00-5AA0 





I 3) 

H 

Rated 

input 

current 4) 




without integrated 

line filter 




with integrated 

line filter 

2 

690 V 600 V 690 V 600 V 690 V 600 V 690 V 

kW hp A A A A A Article No. Article No. 


3 4 5 5 4 4 6 FSD 6SL32 ■ 0- ■ YH18- ■ U ■ 0 6SL32 ■ 0- ■ YH18- ■ A ■ 0 

4 5 6.3 6.3 5 5 7 FSD 6SL32 ■ 0- ■ YH20- ■ U ■ 0 6SL32 ■ 0- ■ YH20- ■ A ■ 0 

5.5 7.5 9 9 6.3 6.3 10 FSD 6SL32 ■ 0- ■ YH22- ■ U ■ 0 6SL32 ■ 0- ■ YH22- ■ A ■ 0 

7.5 10 11 11 9 9 12 FSD 6SL32 ■ 0- ■ YH24- ■ U ■ 0 6SL32 ■ 0- ■ YH24- ■ A ■ 0 







45 50 52 52 42 42 52 FSE 6SL32 ■ 0- ■ YH38- ■ U ■ 0 6SL32 ■ 0- ■ YH38- ■ A ■ 0 


75 75 80 80 62 62 80 FSF 6SL32 ■ 0- ■ YH42- ■ U ■ 0 6SL32 ■ 0- ■ YH42- ■ C ■ 0 




160 150 171 171 144 144 175 FSG 5) – 6SL32 ■ 0- ■ YH50- ■ C ■ 0 

200 200 208 208 171 171 210 FSG 5) – 6SL32 ■ 0- ■ YH52- ■ C ■ 0 

250 250 250 250 208 208 255 FSG 5) – 6SL32 ■ 0- ■ YH54- ■ C ■ 0 

315 350 330 345 272 282 343 FSH – 6SL32 2 0- ■ YH56- ■ C ■ 0 

355 400 385 388 314 317 401 FSH – 6SL32 2 0- ■ YH58- ■ C ■ 0 

400 450 420 432 348 357 437 FSH – 6SL32 2 0- ■ YH60- ■ C ■ 0 

450 500 470 487 394 408 489 FSH – 6SL32 2 0- ■ YH62- ■ C ■ 0 

500 500 520 546 444 462 540 FSJ – 6SL32 2 0- ■ YH64- ■ C ■ 0 

560 600 580 610 476 498 602 FSJ – 6SL32 2 0- ■ YH66- ■ C ■ 0 

630 700 650 679 532 554 675 FSJ – 6SL32 2 0- ■ YH68- ■ C ■ 0 



Class 3C2 2 2 

Class 3C3 3 3 


Without Operator Panel 1 1 

With BOP-2 Basic Operator Panel (numeric 2-line display) 2 2 

With IOP-2 Intelligent Operator Panel (graphic color display) 3 3 



With SINAMICS G120X I/O Extension Module 1 1 

NEW NEU 

Line filter 


U 

With integrated line filter Category C2 

A 


C 

Communication 

USS, Modbus RTU, BACnet MS/TP B B 


PROFIBUS DP P P 











5) The 690 V versions of frame size FSG are only available with an integrated 

line filter Category C3. To operate the converters also within TN systems 

with grounded outer conductor, you must remove the grounding screw. 




6SL3255-0AA00-5AA0 


0.75 kW to 630 kW (1 hp to 700 hp) 



Line filters Line reactors Recommended line-side overcurrent protection devices 1) 

Category C2 Category C1 For frame sizes FSH and FSJ 

mandatory when using an 

external line filter Category C2 

Fuses 

IEC-compliant 

Fuses 


Rated voltage 

600 V AC 2) 


Article No. Article No. A Article No. Class/Article No. A 


– A DC link reactor 

16 3NA3805-6 J 8 

available with 

– is integrated for 

16 3NA3805-6 J 10 

integrated line filter 

frame sizes 

Category C2 

– 

FSA to FSG – 

16 3NA3805-6 J 15 

– therefore no 

16 3NA3805-6 J 15 

– line reactor 

20 3NA3807-6 J 20 

is required. 

– 25 3NA3810-6 J 25 

– 32 3NA3812-6 J 30 

– 40 3NA3817-6KJ J 35 

– 50 3NA3820-6KJ J 50 

– 63 3NA3822-6 J 60 

– 80 3NA3824-6 J 80 

– 80 3NA3824-6 J 80 

– – 100 3NA3830-6 J 110 

– – 125 3NA3132-6 J 150 

– – 160 3NA3136-6 J 150 

– – 200 3NA3140-6 J 200 

– – 250 3NE1227-0 250 

– – 315 3NE1230-0 315 

– – 350 3NE1331-0 350 

6SL3760-0MS00-0AA0 – 6SL3000-0CH34-8AA0 450 3NE1333-2 450 

– 500 3NE1334-2 500 

– 560 3NE1435-2 560 

– 6SL3000-0CH36-0AA0 630 3NE1436-2 630 

– 710 3NE1437-2 710 

– 6SL3000-0CH38-4AA0 800 3NE1438-2 800 

– 850 3NE1448-2 850 

2 







2/19



0.75 kW to 630 kW (1 hp to 700 hp) 


6SL3255-0AA00-5AA0 





I 3) 

H 

Rated 

input 

current 4) 




without integrated 

line filter 




with integrated 

line filter 

2 

690 V 600 V 690 V 600 V 690 V 600 V 690 V 

kW hp A A A A A Article No. Article No. 



4 5 6.3 6.3 5 5 7 FSD 6SL32 ■ 0- ■ YH20- ■ U ■ 0 6SL32 ■ 0- ■ YH20- ■ A ■ 0 

5.5 7.5 9 9 6.3 6.3 10 FSD 6SL32 ■ 0- ■ YH22- ■ U ■ 0 6SL32 ■ 0- ■ YH22- ■ A ■ 0 














160 150 171 171 144 144 175 FSG 5) – 6SL32 ■ 0- ■ YH50- ■ C ■ 0 

200 200 208 208 171 171 210 FSG 5) – 6SL32 ■ 0- ■ YH52- ■ C ■ 0 

250 250 250 250 208 208 255 FSG 5) – 6SL32 ■ 0- ■ YH54- ■ C ■ 0 

315 350 330 345 272 282 343 FSH – 6SL32 2 0- ■ YH56- ■ C ■ 0 

355 400 385 388 314 317 401 FSH – 6SL32 2 0- ■ YH58- ■ C ■ 0 

400 450 420 432 348 357 437 FSH – 6SL32 2 0- ■ YH60- ■ C ■ 0 

450 500 470 487 394 408 489 FSH – 6SL32 2 0- ■ YH62- ■ C ■ 0 

500 500 520 546 444 462 540 FSJ – 6SL32 2 0- ■ YH64- ■ C ■ 0 

560 600 580 610 476 498 602 FSJ – 6SL32 2 0- ■ YH66- ■ C ■ 0 

630 700 650 679 532 554 675 FSJ – 6SL32 2 0- ■ YH68- ■ C ■ 0 



Class 3C2 2 2 

Class 3C3 3 3 


Without Operator Panel 1 1 

With BOP-2 Basic Operator Panel (numeric 2-line display) 2 2 

With IOP-2 Intelligent Operator Panel (graphic color display) 3 3 



With SINAMICS G120X I/O Extension Module 1 1 

NEW NEU 

Line filter 


U 


A 


C 

Communication 

USS, Modbus RTU, BACnet MS/TP B B 


PROFIBUS DP P P 











5) The 690 V versions of frame size FSG are only available with an integrated 

line filter Category C3. To operate the converters also within TN systems 

with grounded outer conductor, you must remove the grounding screw. 




6SL3255-0AA00-5AA0 


0.75 kW to 630 kW (1 hp to 700 hp) 



Output reactors Sine-wave filters dv/dt filters plus VPL 


JTA:TEU2532-0FP00-4EA0 – JTA:TEF1203-0GB 

– 

– 

– 

– 

– 

– 

JTA:TEU9932-0FP00-4EA0 – JTA:TEF1203-0HB 

– 

– 

JTA:TEU9932-0FS00-0EA0 – JTA:TEF1203-0JB 

– 

JTA:TEU9932-1FC00-1BA0 – JTA:TEF1203-0KB 

– 

JTA:TEU9932-0FV00-1BA0 – JTA:TEF1203-0LB 

– 

JTA:TEU4732-0FA00-0BA0 – JTA:TEF1203-0MB 

– 

– 

6SL3000-2AH34-7AA0 – 6SL3000-2DH35-8AA0 

– 

6SL3000-2AH35-8AA0 – 

6SL3000-2AH38-1AA0 – 6SL3000-2DH38-1AA0 

– 

– 

– 

2 


2/21



0.75 kW to 630 kW (1 hp to 700 hp) 


6SL3255-0AA00-5AA0 


2 


Supplementary system components for SINAMICS G120X 

Description 

IOP-2 Intelligent Operator Panel 

Operating languages: English, German, 

French, Italian, Spanish, Portuguese, 

Dutch, Swedish, Finnish, Russian, Czech, 

Polish, Turkish, Chinese Simplified 

IOP-2 Handheld 

BOP-2 Basic Operator Panel 

Door mounting kit 

for IOP-2/BOP-2 

SINAMICS SD card 

512 MB, empty 


for wireless commissioning, operation and 

diagnostics of the following converters 

using a smartphone, tablet or laptop 

SINAMICS CONNECT 300 IoT Gateway 

for connecting up to eight converters to the 

Cloud MindSphere 

SINAMICS G120X I/O Extension Module 

for direct connection of Pt1000/Ni1000 

temperature sensors 1) 

Shield connection kits for Power Module 

for SINAMICS G120X 

• Frame sizes FSA to FSG 

• Frame sizes FSH to FSJ 

Push-through mounting frames 


• Frame size FSA 

• Frame size FSB 

• Frame size FSC 

• Frame size FSD 

• Frame size FSE 

• Frame size FSF 

• Frame size FSG 

Installation handles 


• Frame sizes FSD to FSF 

IP21 top covers 




• Frame sizes FSC and FSD 


• Frame sizes FSF and FSG 

Wiring adapter 

for optimal and space-saving wiring 



Installation kit for line-side 

cable connection, left 


• Frame size FSH 

NEW NEU 

NEW NEU 

NEW NEU 


Converter (380 ... 480 V 3 AC, PROFINET) 

with IOP-2 and SINAMICS G120 Smart Access 

• 0.75 kW, FSA, without integrated line filter 

• 0.75 kW, FSA, with integrated line filter 

Category C2 

• 3 kW, FSA, with integrated line filter 

Category C2 

• 7.5 kW, FSB, with integrated line filter 

Category C2 

SINAMICS G120X training case 

Article No. 

6SL3255-0AA00-4JA2 

6SL3255-0AA00-4HA1 

6SL3255-0AA00-4CA1 

6SL3256-0AP00-0JA0 

6SL3054-4AG00-2AA0 

6SL3255-0AA00-5AA0 

6SL3255-0AG30-0AA0 

6SL3255-0BE00-0AA0 

Included in the scope 

of delivery of the 

converters, can be 

ordered as spare part 

Please observe the notes 

included in the operating 

instructions 

6SL3261-6GA00-0BA0 

6SL3261-6GB00-0BA0 

6SL3261-6GC00-0BA0 

6SL3261-6GD00-0BA0 

6SL3261-6GE00-0BA0 

6SL3261-6GF00-0BA0 

6SL3261-6GG00-0BA0 

6SL3200-0SM22-0AA0 

6SL3266-1PA00-0BA0 

6SL3266-1PB00-0BA0 

6SL3266-1PD00-0BA0 

6SL3266-1PE00-0BA0 

6SL3266-1PF00-0BA0 

6SL3266-2HG00-0BA0 

6SL3366-1LH00-0PA0 

6SL3200-0AE70-0AA0 

6SL3200-0AE72-0AA0 

6SL3200-0AE73-0AA0 

6SL3200-0AE74-0AA0 

6AG1067-2AA00-0AC1 

1) The SINAMICS G120X I/O Extension Module 

(article number: 6SL3255-0BE00-0AA0) is only supported on the 

SINAMICS G120X converters with FS code ³ 02 02 (FSA to FSG) / 

02 (FSH/FSJ) and firmware V1.01. 

The FS code version of the converter is on the rating plate. 

For more information please refer to the documentation on the Internet at: 


Spare parts for SINAMICS G120X 

Description 

FPI board 

(freely-programmable interface board) 


• Frame sizes FSH and FSJ 

PSB board (power supply board) 



Current transformers 


• 2000 A for frame size FSJ 

• 1000 A for frame sizes FSH and FSJ 

Spare parts kit for Control Unit 


• Frame sizes FSA to FSJ 

Shield connection kit for Control Unit 


• Frame sizes FSD to FSG 

Shield connection kits for Power Module 









Small parts assembly set 


• Frame sizes FSD to FSG 

Terminal cover kits 






External fan units 










Internal fan unit 



Control Units 


frame sizes FSD to FSJ 

• USS, Modbus RTU, BACnet MS/TP 

• PROFINET, EtherNet/IP 

•PROFIBUS DP 

Article No. 

6SL3200-0SP05-0AA0 

6SL3200-0SP06-0AA0 

6SL3200-0SE01-0AA0 

6SL3200-0SE02-0AA0 

6SL3200-0SK10-0AA0 

6SL3264-1EA00-0YA0 

6SL3262-1AA01-0DA0 

6SL3262-1AB01-0DA0 

6SL3262-1AC01-0DA0 

6SL3262-1AD01-0DA0 

6SL3262-1AE01-0DA0 

6SL3262-1AF01-0DA0 

6SL3262-1AG01-0DA0 

6SL3200-0SK08-0AA0 

6SL3200-0SM13-0AA0 

6SL3200-0SM14-0AA0 

6SL3200-0SM15-0AA0 

6SL3200-0SM16-0AA0 

6SL3200-0SF52-0AA0 

6SL3200-0SF53-0AA0 

6SL3200-0SF54-0AA0 

6SL3200-0SF15-0AA0 

6SL3200-0SF16-0AA0 

6SL3200-0SF17-0AA0 

6SL3200-0SF18-0AA0 

6SL3300-0SF01-0AA0 

6SL3200-0SF50-0AA0 

6SL3200-0SC10-0BA0 

6SL3200-0SC10-0FA0 

6SL3200-0SC10-0PA0 

Compact Installation Instructions are supplied in hard copy 

form in German and English with every SINAMICS G120X. 

Further technical specifications and documentation are available 

on the Internet at: 


and via the Drive Technology Configurator (DT Configurator) in 

the Siemens Industry Mall: 






0.75 kW to 630 kW (1 hp to 700 hp) 


■ Technical specifications 

Unless explicitly specified otherwise, the following technical specifications are valid for all SINAMICS G120X converters. 

General technical specifications 

Mechanical specifications 

Shock and vibration load 


- Transport in transport packaging Class 2M3 

acc. to EN 61800-5-1 and 

EN 60068-2-6 

- Vibration during operation acc. to Class 3M1 

IEC 60721-3-3: 2002 


- Vibration in transport packaging: ±1.5 mm for 5 ... 9 Hz 

Test Fc acc. to EN 60068-2-64 0.5 × g at 9 ... 200 Hz 

- Shock in product packaging: ±1.5 mm for 5 ... 9 Hz 

Test Fc acc. to EN 60068-2-6 0.5 × g at 9 ... 200 Hz 

- Vibration during operation: 0.075 mm at 10 ... 58 Hz 

Test Fc acc. to EN 60068-2-6 9.81 m/s² (1 × g) at > 58 ... 200 Hz 

- Shock during operation: 

Shock type EA 

Test acc. to EN 60068-2-27 49 m/s 2 (5 × g)/30 ms 

147 m/s 2 (15 × g)/11 ms 


• Frame sizes FSA ... FSJ 

• Frame sizes FSA ... FSG 

Permissible mounting position 

Ambient conditions 

Protection class 

According to EN 61800-5-1 

Touch protection 

According to EN 61800-5-1 

Humidity, max. 

Ambient temperature 

IP20/ UL Open Type 

Optional IP21/ UL Open Type with IP21 top covers 

Vertical wall mounting 

Class III (PELV1) for Power Module 

Class III (PELV1) for Control Unit 1) 

Class I (with protective conductor system) 

45 °C (113 °F) with derating 

Variants PROFIBUS DP and USS, Modbus RTU, BACnet MS/TP: 

-20 °C ... +60 °C (-4 ... +140 °F) with a side clearance of 5 cm or -20 °C ... +50 °C (-4 ... +122 °F) for 

side-by-side mounting, >45 °C (113 °F) with derating 

- Frame sizes FSH and FSJ 0 ... 55 °C (32 ... 131 °F) , >45 °C (113 °F) with derating 

- All frame sizes with operator panel 0...50°C (32...122°F) see also derating characteristics 

Environmental class in operation 

• Harmful chemical substances 

- Frame sizes FSA to FSG Class 3C2 acc. to IEC 60721-3-3: 2002 

Optional: Class 3C3 acc. to IEC 60721-3-3: 2002 2) 

- Frame sizes FSH and FSJ Class 3C2 acc. to IEC 60721-3-3: 2002 

• Organic/biological pollutants Class 3B1 acc. to IEC 60721-3-3: 2002 

• Degree of pollution 2 acc. to EN 61800 

2 

1) Only supported for SINAMICS G120X converters with FS code 

02 02 (FSA to FSG) / 02 (FSH/FSJ). 

The FS code of the converter is on the rating plate. 

2) Only supported for SINAMICS G120X converters with FS code 02 02. 

The FS code of the converter is on the rating plate. 



2/23



0.75 kW to 630 kW (1 hp to 700 hp) 


2 


General technical specifications (continued) 

Standards 

Compliance with standards 1) 



CE, UL, cUL, RCM, SEMI F47, RoHS II, EAC, KCC, REACH 

CE, UL, cUL, RCM, SEMI F47, RoHS II, EAC, REACH 

Fail-safe certification 

Function: Safe Torque Off (STO) 

External components (e.g. safety relays) are necessary for using the STO safety function. 

• According to IEC 61508 SIL 3 

• According to EN ISO 13849-1 PL e and Category 3 

CE marking, according to 

EMC Directive 2014/30/EU 

Low Voltage Directive 2014/35/EU 

EMC Directive 1) 

acc. to EN 61800-3 

• Interference immunity 

The SINAMICS G120X converters are tested according to the interference immunity requirements for environments 

according to Category C3. 

• Interference emissions 

2) 

- Frame sizes FSA to FSF 


- Frame sizes FSA to FSG 


Category C2 

- Frame sizes FSG to FSJ 


Category C3 

Observance of the limit values according for conducted RF emissions 

according to IEC 61800-3 Category C2 / EN 55011:2016 Class A 


according to IEC 61800-3 Category C3 

- Frame sizes FSH and FSJ 


with integrated line filter Category C3 according to IEC 61800-3 Category C2 / EN 55011:2016 Class A 

with optional line filter Category C2 

and optional line reactor 

- Frame sizes FSA to FSF 90 kW 

without integrated line filter with 

optional line filter Category C1 


according to IEC 61800-3 Category C1 / EN 55011:2016 Class B 

- Frame size FSF 110 kW 


with integrated line filter Category C2 according to IEC 61800-3 Category C1 / EN 55011:2016 Class B 

with optional line filter Category C1 

Note: 

The EMC product standard EN 61800-3 does not apply directly to a frequency converter but to a PDS (Power Drive 

System), which comprises the complete circuitry, motor and cables in addition to the converter. The frequency converters 

on their own do not generally require identification according to the EMC Directive. 

1) Additional information is available in the operating instructions on the 

Internet at: www.siemens.com/sinamics-g120x/documentation 

2) Non-filtered devices are designed for operation in IT systems or in conjunction 

with an RCD. The customer must provide suitable RI suppression 

equipment to ensure that these devices comply with the limits defined for 

Category C3. 




0.75 kW to 630 kW (1 hp to 700 hp) 



SINAMICS G120X converters 

Integrated bus interface Variant PROFINET, EtherNet/IP Variant PROFIBUS DP Variant USS, Modbus RTU, 

BACnet MS/TP 

Fieldbus protocols 

Hardware 

I/O interfaces 

Signal cable cross-section 

Digital inputs – standard 

• Switching level: 0 1 

• Switching level: 1 0 

Digital inputs – fail-safe 

Digital outputs 

Analog inputs 

• Switching threshold: 0 1 

• Switching threshold: 1 0 

Analog outputs 

PTC/KTY/Pt1000 interface 

Voltage supply for the integrated 

Control Unit 

Tool interfaces 

Memory card 

Operator panels 

•PROFINET 

• EtherNet/IP 

2 × RJ45, device name can 

be stored on the device, 

max. 100 Mbit/s (full duplex) 

• PROFIBUS DP 

0.15 ... 1.5 mm 2 (28 ... 16 AWG) 

6 isolated inputs 

Optically isolated; 

Free reference potential (own potential group) 

NPN/PNP logic can be selected using the wiring 

11 V 

5V 

9-pin SUB-D socket, isolated, 

max. 12 Mbit/s 

1 isolated input 

Max. input voltage 60 V 

Safety function: Safe Torque Off (STO) 

External components (e.g. safety relays) are necessary for using the STO safety function. 

2 relay changeover contacts 

250 V AC, 2 A (inductive load), 

30 V DC, 5 A (ohmic load) 

2 analog inputs 

Differential input 

Switchable between voltage (-10 ... +10 V) and current (0/4 ... 20 mA) using a DIP switch 

12-bit resolution 

Can be used as additional digital input 

4V 

1.6 V 

•USS 

• Modbus RTU 

• BACnet MS/TP 

RS485 connected at a terminal, isolated, 

bus terminating resistor can be 

switched in, 

USS: max. 187.5 kBaud 

Modbus RTU:19.2 kBaud 

BACnet MS/TP: max. 187.5 kBaud 

1 non-isolated output 

Switchable between voltage (0 ... 10 V) and current (0/4 ... 20 mA) using a parameter 

Voltage mode: 10 V, min. burden 10 k 

Current mode: 20 mA, max. burden 500 

The analog outputs have short-circuit protection 

1 motor temperature sensor input 

Connectable sensors PTC, Pt1000, KTY and bimetal, 

accuracy ±5 °C 

Note: 

Connection and evaluation of a recommended, optional Pt100 temperature sensor possible by using a free analog 

input and output 

24 V DC via the Power Module or by connecting to an external 20.4 ... 28.8 V DC power supply 

Typical input current: 500 mA at 24 V DC 

Optional 


Optional 

BOP-2 Basic Operator Panel or IOP-2 Intelligent Operator Panel or SINAMICS G120 Smart Access 

2 


2/25



0.75 kW to 630 kW (1 hp to 700 hp) 


2 


SINAMICS G120X converters 

Open-loop/closed-loop control techniques 

V/f linear/quadratic/parameterizable 

V/f with flux current control (FCC) 

V/f ECO linear/quadratic 

Vector control, sensorless 

Software functions 

Setpoint input, can be parameterized 

Fixed frequencies 

JOG 

Digital motorized potentiometer 

(MOP) 

Ramp smoothing 

Extended ramp-function generator 

(with ramp smoothing OFF3) 

Slip compensation 

✓ 

✓ 

✓ 

✓ 

✓ 

16, parameterizable 

✓ 

✓ 

✓ 

✓ 

✓ 

Switchable drive data sets (DDS) ✓ (4) 

Switchable command data sets (CDS) ✓ (2) 

Free function blocks (FFB) for ✓ (for frame sizes FSA to FSG) 

logical and arithmetic operations 

Flying restart 

Automatic restart 

after line supply failure or operating 

fault (AR) 

Technology controller (internal PID) 

Energy saving display 

✓ 

✓ 

✓ 

✓ 

3 additional, free PID controllers ✓ 

Hibernation mode with internal/ ✓ 

external PID controller 

Belt monitoring with and without 

sensor (load torque monitoring) 

Dry-running/overload protection 

monitoring (load torque monitoring) 

Deragging 

Thermal motor protection 

Thermal converter protection 

Motor identification 

Auto-ramping (V dc_max controller) 

Kinetic buffering (V dc_min controller) 

Braking functions 

•DC braking 

• Compound braking 

✓ 

✓ 

✓ 

✓ (I 2 t, sensor: PTC, Pt100, Pt1000, KTY and bimetal) 

✓ 

✓ 

✓ 

✓ 

✓ 

✓ 





0.75 kW to 630 kW (1 hp to 700 hp) 



General technical specifications of the power electronics 

System operating voltage 


For systems complying with IEC: 

200 ... 240 V 3 AC +10 % -20 % 

380 ... 480 V 3 AC +10 % -20 % 

500 ... 690 V 3 AC +10 % -20 % 

For systems complying with UL: 

200 ... 240 V 3 AC 

380 ... 480 V 3 AC 

500 ... 600 V 3 AC 

• Frame sizes FSH and FSJ 380 ... 480 V 3 AC +10 % -15 % 

500 ... 690 V 3 AC +10 % -15 % 

Line supply requirements 

Line impedance u K 

• Frame sizes FSA to FSG 4% 


Input frequency 

Output frequency 



A line reactor (u K = 2 %) must be connected in series, if the short-circuit power ratio R SC > 33 (315 ... 500 kW) or 

R SC > 20 (560 kW) 

47 ... 63 Hz 

Control mode V/f: 0 ... 550 Hz 

Control mode Vector: 0 ... 240 Hz 

Control mode V/f: 0 ... 150 Hz 

Control mode Vector: 0 ... 150 Hz 

Pulse frequency 

• Frame sizes FSA to FSG 200 V: 

4 kHz 

Higher pulse frequencies up to 16 kHz see derating data 

400 V: 

4 kHz for converters with a rated power 90 kW 

2 kHz for converters with a rated power 110 kW 


690 V: 

2kHz 



2kHz 

Self-adjusting up to 4 kHz see derating data 

Power factor 

• Frame sizes FSA to FSG 0.75 ... 0.93 

• Frame sizes FSH and FSJ 0.75 ... 0.93 (with line reactor u K =2%) 

Offset factor cos 

• Frame sizes FSA to FSC 0.96 

• Frame sizes FSD to FSG 0.99 

• Frame sizes FSH and FSJ 0.96 

Output voltage, max. 

97 % 

as % of line voltage 

Overload capability 

• Low overload (LO) 

1.1 × base-load current I L (i. e. 110 % overload) for 60 s within a cycle time of 300 s 

• High overload (HO) 

Cooling 

Installation altitude 

Short Circuit Current Rating (SCCR) 

max. 

Protection functions 

1.5 × base-load current I H (i. e. 150 % overload) for 60 s within a cycle time of 600 s 

Air cooling using an integrated fan 

Up to 1000 m (3281 ft) above sea level without derating, 

>1000 m (3281 ft) see derating characteristics 

100 kA see Recommended line-side overcurrent protection devices – the value depends on the fuses and circuit 

breakers used 

For more information, see: 


• Undervoltage 

•Overvoltage 

• Overcurrent/overload 

• Ground fault 

• Short-circuit 

• Stall protection 

• Motor blocking protection 

• Motor overtemperature 

• Converter overtemperature 

• Parameter locking 

2 


2/27



0.75 kW to 630 kW (1 hp to 700 hp) 


2 


Maximum permissible motor cable lengths SINAMICS G120X 

The values specified in the table below apply with low-capacitance CY cables and with pulse frequencies set in the factory. 

Without compliance to the EMC category 

Maximum permissible motor cable lengths (shielded/unshielded) in m (ft) 

FSA to FSC FSD and FSE FSF and FSG FSH and FSJ 

Converters without optional power components 

• 200 V versions 150/300 (492/984) 200/300 (656/984) FSF: 300/450 (984/1476) – 

• 400 V versions 150/300 (492/984) 200/300 (656/984) 300/450 (984/1476) 150/200 (492/656) 

• 690 V versions – FSD 30 kW: 200/300 (656/984) 300/450 (984/1476) 150/200 (492/656) 

FSD 37 kW, FSE: 300/450 (984/1476) 

Converters with one optional output reactor 

• 200 V versions – – – – 

• 400 V versions – 200/300 (656/984) 1) 300/450 (984/1476) 1) 300/450 (984/1476) 

• 690 V versions – FSD 30 kW: 200/300 (656/984) 1) 

FSD 37 kW, FSE: 300/450 (984/1476) 1) 300/450 (984/1476) 1) 300/450 (984/1476) 

Converters with two in series connected optional output reactors 1) 

• 200 V versions – – – – 

• 400 V versions – 350/525 (1148/1723) 525/800 (1723/2625) – 

• 690 V versions – FSD 30 kW: 350/525 (1148/1723) 525/800 (1723/2625) – 

FSD 37 kW, FSE: 525/800 (1723/2625) 

Converters with optional sine-wave filter 

• 200 V versions – – – – 

• 400 V versions 200/300 (656/984) 200/300 (656/984) FSF: 200/300 (656/984) – 

FSG: 300/450 (984/1476) 

• 690 V versions – – – – 

Converters with optional dv/dt filter plus VPL 

• 200 V versions – – – – 

• 400 V versions – 350/525 (1148/1723) 650/800 (2133/2625) 300/450 (984/1476) 

• 690 V versions – FSD 30 kW: 350/525 (1148/1723) 450/625 (1476/2051) 2) 300/450 (984/1476) 

FSD 37 kW, FSE: 450/625 (1476/2051) 2) 

With compliance to the EMC category 3) 

Converters with integrated line filter 

for observance of the limit values for conducted RF emissions according to IEC 61800-3 Category C3 

• 200 V versions – – – – 

• 400 V versions 150/– (492/–) 200/– (656/–) 200/– (656/–) 150/– (492/–) 4) 

• 690 V versions – 150/– (492/–) 150/– (492/–) 150/– (492/–) 4) 

Converters with integrated line filter with external line filter Category C2 

for observance of the limit values for conducted RF emissions according to IEC 61800-3 Category C2 / EN 55011:2016 Class A 

• 200 V versions – – – – 

• 400 V versions – – – 150/– (492/–) 

• 690 V versions – – – 150/– (492/–) 

Converters with integrated line filter 

for observance of the limit values for conducted RF emissions according to IEC 61800-3 Category C2 / EN 55011:2016 Class A 

• 200 V versions – – – – 

• 400 V versions 150/– (492/–) 150/– (492/–) 150/– (492/–) – 

• 690 V versions – 100/– (328/–) – – 

Converters with integrated line filter with external sine-wave filter 

for observance of the limit values for conducted RF emissions according to IEC 61800-3 Category C2 / EN 55011:2016 Class A or according to IEC 61800-3 Category C3 

• 200 V versions – – – – 

• 400 V versions 

Category C2 

FSA: 100/– (328/–) 

FSB: 200/– (656/–) 

Category C3 

FSC: 200/– (656/–) 

Category C2 

150/– (492/–) 

Category C2 

150/– (492/–) 

• 690 V versions – – – – 

Converters without/with integrated line filter with external line filter Category C1 

for observance of the limit values for conducted RF emissions according to IEC 61800-3 Category C1 / EN 55011:2016 Class B 

• 200 V versions – – – – 

• 400 V versions Without integrated line filter Without integrated line filter 

Without integrated line filter – 

50/– (164/–) 3) 50/– (164/–) 3) FSF 90 kW: 50/– (164/–) 3) 

With integrated line filter 

FSF 110 kW: 10/– (23.8/–) 3) 

• 690 V versions – – – – 

– 

1) For frame sizes FSD to FSG the maximum permissible cable lengths are not 

increased with one output reactor. By means of the output reactor, the loading 

of the motor windings is reduced by lower rates of voltage rise (dv/dt). 

By means of two output reactors connected in series, the maximum permissible 

cable lengths for frame sizes FSD to FSG are increased. 

2) Maximum overvoltage at the motor terminals



0.75 kW to 630 kW (1 hp to 700 hp) 



SINAMICS G120X converters · Degree of protection IP20/UL Open Type · 200 ... 240 V 3 AC 

6SL32.0-.YC10-.U.0 6SL32.0-.YC12-.U.0 6SL32.0-.YC14-.U.0 6SL32.0-.YC16-.U.0 

Type of voltage 3AC 3AC 3AC 3AC 

Line voltage V 200 ... 240 200 ... 240 200 ... 240 200 ... 240 

Output current at line voltage 200 V 

• without overload rated value A 4.4 6.1 7.7 10.8 

• with low overload rated value A 4.2 6.0 7.4 10.4 

• with high overload rated value A 3.2 4.2 6.0 7.4 

• maximum A 5.7 8.1 10.0 14.1 

Supplied active power at rated value of 

output voltage and at line voltage 200 V 

• with low overload kW 0.75 1.1 1.5 2.2 

• with high overload kW 0.55 0.75 1.1 1.5 

Supplied active power [hp] at rated 

value of output voltage and at line 

voltage 240 V 

• with low overload hp 1 1.5 2 3 

• with high overload hp 0.75 1 1.5 2 

Pulse frequency kHz 4 4 4 4 

Efficiency 0.96 0.96 0.96 0.96 

Power loss maximum 1) kW 0.04 0.05 0.07 0.12 

Cooling air flow 

m³/s 0.005 (0.177) 0.0092 (0.325) 0.0092 (0.325) 0.0092 (0.325) 

(ft³/h) 

1 m measuring surface sound pressure dB 55 55 55 63 

level maximum 

Input current at line voltage 200 V 



for mains supply line 

• Type of electrical connection Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals 

• Number of connections 1 1 1 1 

• Connectable conductor cross-section mm² 1.5 ... 2.5 1.5 ... 2.5 1.5 ... 2.5 1.5 ... 16 

• Connectable conductor cross-section 18 ... 14 18 ... 14 18 ... 14 10 ... 6 

(AWG) 

for motor supply line 



• Connectable conductor cross-section mm² 1.5 ... 2.5 1.5 ... 2.5 1.5 ... 2.5 1.5 ... 6 

• Connectable conductor cross-section 

(AWG) 

18 ... 14 18 ... 14 18 ... 14 10 ... 6 

Type of electrical connection for PE 

conductor 

Cable length for motor 

On housing with 

M4 screw 


M4 screw 


M4 screw 


M4 screw 

• shielded maximum 2) m(ft) 150 (492.12598) 150 (492.12598) 150 (492.12598) 150 (492.12598) 

• unshielded maximum 2) m(ft) 300 (984.25197) 300 (984.25197) 300 (984.25197) 300 (984.25197) 

Dimensions 

•Width mm (in) 73 (2.87402) 73 (2.87402) 73 (2.87402) 100 (3.93701) 

•Height mm (in) 232 (9.13386) 232 (9.13386) 232 (9.13386) 275 (10.82677) 

•Depth mm (in) 209 (8.22835) 209 (8.22835) 209 (8.22835) 209 (8.22835) 

Frame size FSA FSA FSA FSB 

Weight, approx. kg (lb) 3.3 (7.275246) 3.3 (7.275246) 3.3 (7.275246) 5.8 (12.786796) 

2 

1) Typical values. More information can be found on the Internet at 


2) The values apply without compliance to the EMC category. 

For more information, see Maximum permissible motor cable lengths 

SINAMICS G120X and on the Internet at 




2/29



0.75 kW to 630 kW (1 hp to 700 hp) 


2 




Line voltage V 200 ... 240 200 ... 240 200 ... 240 200 ... 240 





• maximum A 18.4 23.7 29.7 37.8 



• with low overload kW 3 4 5.5 7.5 

• with high overload kW 2.2 3 4 5.5 



voltage 240 V 

• with low overload hp 4 5 7.5 10 

• with high overload hp 3 4 5 7.5 


Efficiency 0.96 0.96 0.97 0.97 



m³/s 0.0185 (0.653) 0.0185 (0.653) 0.0185 (0.653) 0.0185 (0.653) 

(ft³/h) 


level maximum 







• Connectable conductor cross-section mm² 1.5 ... 16 1.5 ... 16 1.5 ... 16 1.5 ... 16 


(AWG) 




• Connectable conductor cross-section mm² 1.5 ... 6 1.5 ... 6 1.5 ... 16 1.5 ... 16 


(AWG) 

10 ... 6 10 ... 6 10 ... 6 10 ... 6 


conductor 



M4 screw 


M4 screw 


M4 screw 


M4 screw 



Dimensions 

•Width mm (in) 100 (3.93701) 100 (3.93701) 140 (5.51181) 140 (5.51181) 

•Height mm (in) 275 (10.82677) 275 (10.82677) 295 (11.61417) 295 (11.61417) 

•Depth mm (in) 209 (8.22835) 209 (8.22835) 209 (8.22835) 209 (8.22835) 

Frame size FSB FSB FSC FSC 









www.siemens.com/sinamics-g120x/documentation



0.75 kW to 630 kW (1 hp to 700 hp) 





Line voltage V 200 ... 240 200 ... 240 200 ... 240 200 ... 240 


• without overload rated value A 43 56 70 82 

• with low overload rated value A 42 54 68 80 

• with high overload rated value A 28 42 54 68 

• maximum A 57 73 92 108 



• with low overload kW 11 15 18.5 22 




voltage 240 V 

• with low overload hp 15 20 25 30 

• with high overload hp 10 15 20 25 


Efficiency 0.97 0.97 0.97 0.97 



m³/s 0.055 (1.942) 0.055 (1.942) 0.055 (1.942) 0.083 (2.931) 

(ft³/h) 


level maximum 



• with high overload rated value A 26.3 40 51 64 




• Connectable conductor cross-section mm² 10 ... 35 10 ... 35 10 ... 35 25 ... 95 

• Connectable conductor cross-section 8 ... 2 8...2 8...2 4 ... -1 

(AWG) 





• Connectable conductor cross-section 8 ... 2 8...2 8...2 4 ... -1 

(AWG) 


Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals 

conductor 




Dimensions 

•Width mm (in) 200 (7.87402) 200 (7.87402) 200 (7.87402) 275 (10.82677) 

•Height mm (in) 472 (18.58268) 472 (18.58268) 472 (18.58268) 551 (21.69291) 

•Depth mm (in) 239 (9.40945) 239 (9.40945) 239 (9.40945) 239 (9.40945) 

Frame size FSD FSD FSD FSE 


2 









2/31



0.75 kW to 630 kW (1 hp to 700 hp) 


2 




Line voltage V 200 ... 240 200 ... 240 200 ... 240 200 ... 240 





• maximum A 141 176 208 260 



• with low overload kW 30 37 45 55 

• with high overload kW 22 30 37 45 



voltage 240 V 




Efficiency 0.97 0.97 0.97 0.97 



m³/s 0.083 (2.931) 0.153 (5.403) 0.153 (5.403) 0.153 (5.403) 

(ft³/h) 


level maximum 





• Type of electrical connection Screw-type terminals M10 screw M10 screw M10 screw 



• Connectable conductor cross-section 4 ... -1 2...-3 2...-3 2 ... -3 

(AWG) 


• Type of electrical connection Screw-type terminals M10 screw M10 screw M10 screw 




(AWG) 


Screw-type terminals M10 screw M10 screw M10 screw 

conductor 




Dimensions 

•Width mm (in) 275 (10.82677) 305 (12.00787) 305 (12.00787) 305 (12.00787) 

•Height mm (in) 551 (21.69291) 709 (27.91339) 709 (27.91339) 709 (27.91339) 

•Depth mm (in) 239 (9.40945) 360 (14.17323) 360 (14.17323) 360 (14.17323) 

Frame size FSE FSF FSF FSF 












0.75 kW to 630 kW (1 hp to 700 hp) 




6SL32.0-.YE10-.A.0 

6SL32.0-.YE10-.U.0 

6SL32.0-.YE12-.A.0 

6SL32.0-.YE12-.U.0 

6SL32.0-.YE14-.A.0 

6SL32.0-.YE14-.U.0 

6SL32.0-.YE16-.A.0 

6SL32.0-.YE16-.U.0 


Line voltage V 380 ... 480 380 ... 480 380 ... 480 380 ... 480 





• maximum A 2.7 3.4 4.8 6.4 



• with low overload kW 0.75 1.1 1.5 2.2 

• with high overload kW 0.55 0.75 1.1 1.5 



voltage 480 V 

• with low overload hp 1 1.5 2 3 

• with high overload hp 0.75 1 1.5 2 


Efficiency 0.98 0.98 0.98 0.98 

Power loss maximum 1) kW 0.04 0.05 0.06 0.08 


m³/s 0.005 (635.66406) 0.005 (635.66406) 0.005 (635.66406) 0.005 (635.66406) 

(ft³/h) 


level maximum 







• Connectable conductor cross-section mm² 1.5 ... 2.5 1.5 ... 2.5 1.5 ... 2.5 1.5 ... 2.5 


(AWG) 




• Connectable conductor cross-section mm² 1.5 ... 2.5 1.5 ... 2.5 1.5 ... 2.5 1.5 ... 2.5 


(AWG) 

18 ... 14 18 ... 14 18 ... 14 18 ... 14 


conductor 



M4 screw 


M4 screw 


M4 screw 


M4 screw 



Dimensions 

•Width mm (in) 73 (2.87402) 73 (2.87402) 73 (2.87402) 73 (2.87402) 

•Height mm (in) 232 (9.13386) 232 (9.13386) 232 (9.13386) 232 (9.13386) 

•Depth mm (in) 209 (8.22835) 209 (8.22835) 209 (8.22835) 209 (8.22835) 

Frame size FSA FSA FSA FSA 

Weight, approx. 3) kg (lb) 3.2 (7.05478) 3.2 (7.05478) 3.2 (7.05478) 3.2 (7.05478) 

2 







3) The values apply for converters without integrated line filter. 

For more information, see on the Internet at 




2/33



0.75 kW to 630 kW (1 hp to 700 hp) 


2 


6SL32.0-.YE18-.A.0 

6SL32.0-.YE18-.U.0 

6SL32.0-.YE20-.A.0 

6SL32.0-.YE20-.U.0 

6SL32.0-.YE22-.A.0 

6SL32.0-.YE22-.U.0 

6SL32.0-.YE24-.A.0 

6SL32.0-.YE24-.U.0 


Line voltage V 380 ... 480 380 ... 480 380 ... 480 380 ... 480 


• without overload rated value A 8 10.5 13.6 18.5 

• with low overload rated value A 7.7 10.2 13.2 18 


• maximum A 9.1 14 18 24 







voltage 480 V 




Efficiency 0.98 0.98 0.98 0.98 



m³/s 0.005 (635.66406) 0.005 (635.66406) 0.0092 (1169.62187) 0.0092 (1169.62187) 

(ft³/h) 


level maximum 


• with low overload rated value A 6.9 9.75 12 17 





• Connectable conductor cross-section mm² 1.5 ... 2.5 6...16 6...16 6 ... 16 


(AWG) 




• Connectable conductor cross-section mm² 1.5 ... 2.5 6...16 6...16 6 ... 16 


(AWG) 

18 ... 14 10 ... 6 10 ... 6 10 ... 6 


conductor 



M4 screw 


M4 screw 


M4 screw 


M4 screw 



Dimensions 

•Width mm (in) 73 (2.87402) 100 (3.93701) 100 (3.93701) 100 (3.93701) 

•Height mm (in) 232 (9.13386) 275 (10.82677) 275 (10.82677) 275 (10.82677) 

•Depth mm (in) 209 (8.22835) 209 (8.22835) 209 (8.22835) 209 (8.22835) 

Frame size FSA FSB FSB FSB 















0.75 kW to 630 kW (1 hp to 700 hp) 



6SL32.0-.YE26-.A.0 

6SL32.0-.YE26-.U.0 

6SL32.0-.YE28-.A.0 

6SL32.0-.YE28-.U.0 

6SL32.0-.YE30-.A.0 

6SL32.0-.YE30-.U.0 

6SL32.0-.YE32-.A.0 

6SL32.0-.YE32-.U.0 


Line voltage V 380 ... 480 380 ... 480 380 ... 480 380 ... 480 





• maximum A 35 43 51.3 61 







voltage 480 V 




Efficiency 0.98 0.98 0.98 0.98 



m³/s 0.0185 (2351,95680) 0.0185 (2351,95680) 0.055 (6992.30465) 0.055 (6992.30465) 

(ft³/h) 


level maximum 


• with low overload rated value A 24.5 29.5 36 42 

• with high overload rated value A 16.96 23.97 33 38 




• Connectable conductor cross-section mm² 6 ... 16 6...16 10 ... 35 10 ... 35 

• Connectable conductor cross-section 10 ... 6 10 ... 6 8...2 8 ... 2 

(AWG) 




• Connectable conductor cross-section mm² 6 ... 16 6...16 10 ... 35 10 ... 35 

• Connectable conductor cross-section 10 ... 6 10 ... 6 8...2 8 ... 2 

(AWG) 


On housing with On housing with Screw-type terminals Screw-type terminals 

conductor 

M4 screw 

M4 screw 




Dimensions 

•Width mm (in) 140 (5.51181) 140 (5.51181) 200 (7.87402) 200 (7.87402) 

•Height mm (in) 295 (11.61417) 295 (11.61417) 472 (18.58268) 472 (18.58268) 

•Depth mm (in) 209 (8.22835) 209 (8.22835) 239 (9.40945) 239 (9.40945) 

Frame size FSC FSC FSD FSD 

Weight, approx. 3) kg (lb) 7.14 (15.74099) 7.14 (15.74099) 17 (37.47854) 17 (37.47854) 

2 












2/35



0.75 kW to 630 kW (1 hp to 700 hp) 


2 


6SL32.0-.YE34-.A.0 

6SL32.0-.YE34-.U.0 

6SL32.0-.YE36-.A.0 

6SL32.0-.YE36-.U.0 

6SL32.0-.YE38-.A.0 

6SL32.0-.YE38-.U.0 

6SL32.0-.YE40-.A.0 

6SL32.0-.YE40-.U.0 


Line voltage V 380 ... 480 380 ... 480 380 ... 480 380 ... 480 





• maximum A 81 102 122 149 







voltage 480 V 




Efficiency 0.98 0.98 0.98 0.98 



m³/s 0.055 (6992.30465) 0.055 (6992.30465) 0.083 (10552.02338) 0.083 (10552.02338) 

(ft³/h) 


level maximum 








• Connectable conductor cross-section 8 ... 2 8...2 4...-1 4 ... -1 

(AWG) 






(AWG) 



conductor 




Dimensions 

•Width mm (in) 200 (7.87402) 200 (7.87402) 275 (10.82677) 275 (10.82677) 

•Height mm (in) 472 (18.58268) 472 (18.58268) 551 (21.69291) 551 (21.69291) 

•Depth mm (in) 239 (9.40945) 239 (9.40945) 239 (9.40945) 239 (9.40945) 

Frame size FSD FSD FSE FSE 

Weight, approx. 3) kg (lb) 17 (37.47854) 19 (41.88778) 27 (59.52474) 27 (59.52474) 














0.75 kW to 630 kW (1 hp to 700 hp) 



6SL32.0-.YE42-.A.0 

6SL32.0-.YE42-.U.0 

6SL32.0-.YE44-.A.0 

6SL32.0-.YE44-.U.0 

6SL32.0-.YE46-.A.0 

6SL32.0-.YE46-.U.0 

6SL32.0-.YE48-.A.0 

6SL32.0-.YE48-.U.0 


Line voltage V 380 ... 480 380 ... 480 380 ... 480 380 ... 480 





• maximum A 196 241 277 338 







voltage 480 V 




Efficiency 0.98 0.98 0.98 0.98 



m³/s 0.153 (19451.32021) 0.153 (19451.32021) 0.153 (19451.32021) 0.153 (19451.32021) 

(ft³/h) 


level maximum 





• Type of electrical connection M10 screw M10 screw M10 screw M10 screw 




(AWG) 






(AWG) 


M10 screw M10 screw M10 screw M10 screw 

conductor 




Dimensions 

•Width mm (in) 305 (12.00787) 305 (12.00787) 305 (12.00787) 305 (12.00787) 

•Height mm (in) 709 (27.91339) 709 (27.91339) 709 (27.91339) 709 (27.91339) 

•Depth mm (in) 360 (14.17323) 360 (14.17323) 360 (14.17323) 360 (14.17323) 

Frame size FSF FSF FSF FSF 

Weight, approx. 3) kg (lb) 61 (134.48182) 61 (134.48182) 67 (147.70954) 67 (147.70954) 

2 












2/37



0.75 kW to 630 kW (1 hp to 700 hp) 


2 


6SL32.0-.YE50-.A.0 

6SL32.0-.YE50-.C.0 

6SL32.0-.YE52-.A.0 

6SL32.0-.YE52-.C.0 

6SL32.0-.YE54-.A.0 

6SL32.0-.YE54-.C.0 

6SL3220-.YE56-.C.0 


Line voltage V 380 ... 480 380 ... 480 380 ... 480 380 ... 480 





• maximum A 408 500 644 770 







voltage 480 V 




Efficiency 0.98 0.98 0.98 0.98 



m³/s 0.21 (26697.89049) 0.21 (26697.89049) 0.21 (26697.89049) 0.362 (46022.07788) 

(ft³/h) 


level maximum 









(AWG) 






(AWG) 



conductor 



Dimensions 

•Width mm (in) 305 (12.00787) 305 (12.00787) 305 (12.00787) 548 (21.5748) 

•Height mm (in) 999 (39.33071) 999 (39.33071) 999 (39.33071) 1695 (66.73228) 

•Depth mm (in) 360 (14.17323) 360 (14.17323) 360 (14.17323) 393 (15.47244) 

Frame size FSG FSG FSG FSH 

Weight, approx. kg (lb) 105 (231.48536) 113 (249.12234) 120 (264.5547) 151 (332.89799) 





2) The values apply with compliance to the EMC category C3. 






0.75 kW to 630 kW (1 hp to 700 hp) 



6SL3220-.YE58-.C.0 6SL3220-.YE60-.C.0 6SL3220-.YE62-.C.0 6SL3220-.YE64-.C.0 6SL3220-.YE66-.C.0 

Type of voltage 3AC 3AC 3AC 3AC 3AC 

Line voltage V 380 ... 480 380 ... 480 380 ... 480 380 ... 480 380 ... 480 


• without overload rated value A 655 735 840 910 1021 

• with low overload rated value A 640 720 820 890 1000 

• with high overload rated value A 491 551 672 728 786 

• maximum A 864 972 1107 1202 1350 



• with low overload kW 355 400 450 500 560 

• with high overload kW 250 315 355 400 450 



voltage 480 V 

• with low overload hp 450 500 500 600 700 

• with high overload hp 300 350 450 500 500 

Pulse frequency kHz 2 2 2 2 2 

Efficiency 0.98 0.98 0.98 0.98 0.98 

Power loss maximum 1) kW 7.687 8.385 10.418 10.885 12.496 


m³/s 0.362 (46022.07788) 0.362 (46022.07788) 0.45 (57209.76533) 0.45 (57209.76533) 0.45 (57209.76533) 

(ft³/h) 

1 m measuring surface sound pressure dB 74 74 74 74 74 

level maximum 


• with low overload rated value A 654 735 850 924 1038 



• Type of electrical connection M12 screw M12 screw M12 screw M12 screw M12 screw 

• Number of connections 4 4 6 6 6 

• Connectable conductor cross-section mm² 35 ... 240 35 ... 240 35 ... 240 35 ... 240 35 ... 240 

• Connectable conductor cross-section 2 ... -3 2...-3 2...-3 2...-3 2...-3 

(AWG) 






(AWG) 


M12 screw M12 screw M12 screw M12 screw M12 screw 

conductor 


• shielded maximum 2) m(ft) 150 (492.12598) 150 (492.12598) 150 (492.12598) 150 (492.12598) 150 (492.12598) 

Dimensions 

•Width mm (in) 548 (21.5748) 548 (21.5748) 801 (31.53543) 801 (31.53543) 801 (31.53543) 

•Height mm (in) 1695 (66.73228) 1695 (66.73228) 1621 (63.8189) 1621 (63.8189) 1621 (63.8189) 

•Depth mm (in) 393 (15.47244) 393 (15.47244) 393 (15.47244) 393 (15.47244) 393 (15.47244) 

Frame size FSH FSH FSJ FSJ FSJ 

Weight, approx. kg (lb) 157 (346.12573) 159 (350.53497) 236 (520.2909) 250 (551.15562) 250 (551.15562) 

2 



2) The values apply with compliance to the EMC category. 






2/39



0.75 kW to 630 kW (1 hp to 700 hp) 


2 



6SL32.0-.YH18-.A.0 

6SL32.0-.YH18-.U.0 

6SL32.0-.YH20-.A.0 

6SL32.0-.YH20-.U.0 

6SL32.0-.YH22-.A.0 

6SL32.0-.YH22-.U.0 

6SL32.0-.YH24-.A.0 

6SL32.0-.YH24-.U.0 


Line voltage V 500 ... 690 500 ... 690 500 ... 690 500 ... 690 



• with low overload rated value A 5 6.3 9 11 

• with high overload rated value A 4 5 6.3 9 

• maximum A 7 9 13 15 







voltage 600 V 




Efficiency 0.98 0.98 0.98 0.98 



m³/s 0.055 (6992.30465) 0.055 (6992.30465) 0.055 (6992.30465) 0.055 (6992.30465) 

(ft³/h) 


level maximum 



• with high overload rated value A 4.8 5.56 7 9.82 





• Connectable conductor cross-section 8 ... 2 8...2 8...2 8 ... 2 

(AWG) 






(AWG) 



conductor 




Dimensions 

•Width mm (in) 200 (7.87402) 200 (7.87402) 200 (7.87402) 200 (7.87402) 

•Height mm (in) 472 (18.58268) 472 (18.58268) 472 (18.58268) 472 (18.58268) 

•Depth mm (in) 239 (9.40945) 239 (9.40945) 239 (9.40945) 239 (9.40945) 

Frame size FSD FSD FSD FSD 















0.75 kW to 630 kW (1 hp to 700 hp) 



6SL32.0-.YH26-.A.0 

6SL32.0-.YH26-.U.0 

6SL32.0-.YH28-.A.0 

6SL32.0-.YH28-.U.0 

6SL32.0-.YH30-.A.0 

6SL32.0-.YH30-.U.0 

6SL32.0-.YH32-.A.0 

6SL32.0-.YH32-.U.0 


Line voltage V 500 ... 690 500 ... 690 500 ... 690 500 ... 690 





• maximum A 19 26 32 37 







voltage 600 V 




Efficiency 0.98 0.98 0.98 0.98 



m³/s 0.055 (6992.30465) 0.055 (6992.30465) 0.055 (6992.30465) 0.055 (6992.30465) 

(ft³/h) 


level maximum 



• with high overload rated value A 11.79 14 19 22.15 






(AWG) 






(AWG) 



conductor 




Dimensions 

•Width mm (in) 200 (7.87402) 200 (7.87402) 200 (7.87402) 200 (7.87402) 

•Height mm (in) 472 (18.58268) 472 (18.58268) 472 (18.58268) 472 (18.58268) 

•Depth mm (in) 239 (9.40945) 239 (9.40945) 239 (9.40945) 239 (9.40945) 

Frame size FSD FSD FSD FSD 


2 












2/41



0.75 kW to 630 kW (1 hp to 700 hp) 


2 


6SL32.0-.YH34-.A.0 

6SL32.0-.YH34-.U.0 

6SL32.0-.YH36-.A.0 

6SL32.0-.YH36-.U.0 

6SL32.0-.YH38-.U.0 

6SL32.0-.YH38-.A.0 

6SL32.0-.YH40-.A.0 

6SL32.0-.YH40-.U.0 


Line voltage V 500 ... 690 500 ... 690 500 ... 690 500 ... 690 





• maximum A 48 57 71 84 







voltage 600 V 




Efficiency 0.98 0.98 0.98 0.98 

Power loss maximum 1) kW 0.78 0.94 1.08 1.31 


m³/s 0.055 (6992.30465) 0.055 (6992.30465) 0.083 (10552.02338) 0.083 (10552.02338) 

(ft³/h) 


level maximum 



• with high overload rated value A 26.23 34.17 42 50.32 






(AWG) 






(AWG) 



conductor 




Dimensions 

•Width mm (in) 200 (7.87402) 200 (7.87402) 275 (10.82677) 275 (10.82677) 

•Height mm (in) 472 (18.58268) 472 (18.58268) 551 (21.69291) 551 (21.69291) 

•Depth mm (in) 239 (9.40945) 239 (9.40945) 239 (9.40945) 239 (9.40945) 

Frame size FSD FSD FSE FSE 















0.75 kW to 630 kW (1 hp to 700 hp) 



6SL32.0-.YH42-.C.0 

6SL32.0-.YH42-.U.0 

6SL32.0-.YH44-.C.0 

6SL32.0-.YH44-.U.0 

6SL32.0-.YH46-.C.0 

6SL32.0-.YH46-.U.0 

6SL32.0-.YH48-.C.0 

6SL32.0-.YH48-.U.0 


Line voltage V 500 ... 690 500 ... 690 500 ... 690 500 ... 690 


• without overload rated value A 82 103 128 148 



• maximum A 108 135 169 195 







voltage 600 V 




Efficiency 0.98 0.98 0.98 0.98 



m³/s 0.153 (19451.32021) 0.153 (19451.32021) 0.153 (19451.32021) 0.153 (19451.32021) 

(ft³/h) 


level maximum 









(AWG) 






(AWG) 



conductor 




Dimensions 

•Width mm (in) 305 (12.00787) 305 (12.00787) 305 (12.00787) 305 (12.00787) 

•Height mm (in) 709 (27.91339) 709 (27.91339) 709 (27.91339) 709 (27.91339) 

•Depth mm (in) 360 (14.17323) 360 (14.17323) 360 (14.17323) 360 (14.17323) 

Frame size FSF FSF FSF FSF 

Weight, approx. 3) kg (lb) 61 (134.48182) 61 (134.48182) 66.5 (146.60723) 66.5 (146.60723) 

2 












2/43



0.75 kW to 630 kW (1 hp to 700 hp) 


2 


6SL32.0-.YH50-.C.0 6SL32.0-.YH52-.C.0 6SL32.0-.YH54-.C.0 6SL3220-.YH56-.C.0 6SL3220-.YH58-.C.0 


Line voltage V 500 ... 690 500 ... 690 500 ... 690 500 ... 690 500 ... 690 



• with low overload rated value A 171 208 250 330 385 

• with high overload rated value A 144 171 208 272 314 

• maximum A 231 281 338 487 529 







voltage 600 V 




Efficiency 0.98 0.98 0.98 0.98 0.98 



m³/s 0.21 (26697.89049) 0.21 (26697.89049) 0.21 (26697.89049) 0.362 (46022.07788) 0.362 (46022.07788) 

(ft³/h) 


level maximum 









(AWG) 






(AWG) 



conductor 



Dimensions 

•Width mm (in) 305 (12.00787) 305 (12.00787) 305 (12.00787) 548 (21.5748) 548 (21.5748) 

•Height mm (in) 999 (39.33071) 999 (39.33071) 999 (39.33071) 1695 (66.73228) 1695 (66.73228) 

•Depth mm (in) 360 (14.17323) 360 (14.17323) 360 (14.17323) 393 (15.47244) 393 (15.47244) 

Frame size FSG FSG FSG FSH FSH 

Weight, approx. kg (lb) 105 (231.48536) 113 (249.12234) 120 (264.5547) 158 (348.33035) 158 (348.33035) 











0.75 kW to 630 kW (1 hp to 700 hp) 



6SL3220-.YH60-.C.0 6SL3220-.YH62-.C.0 6SL3220-.YH64-.C.0 6SL3220-.YH66-.C.0 6SL3220-.YH68-.C.0 


Line voltage V 500 ... 690 500 ... 690 500 ... 690 500 ... 690 500 ... 690 





• maximum A 598 682 768 864 959 







voltage 600 V 




Efficiency 0.98 0.98 0.98 0.98 0.98 



m³/s 0.362 (46022.07788) 0.362 (46022.07788) 0.45 (57209.76533) 0.45 (57209.76533) 0.45 (57209.76533) 

(ft³/h) 


level maximum 









(AWG) 






(AWG) 



conductor 



• unshielded maximum m(ft) 200 (656.16798) 200 (656.16798) 200 (656.16798) 200 (656.16798) 200 (656.16798) 

Dimensions 

•Width mm (in) 548 (21.5748) 548 (21.5748) 801 (31.53543) 801 (31.53543) 801 (31.53543) 

•Height mm (in) 1695 (66.73228) 1695 (66.73228) 1621 (63.8189) 1621 (63.8189) 1621 (63.8189) 

•Depth mm (in) 393 (15.47244) 393 (15.47244) 393 (15.47244) 393 (15.47244) 393 (15.47244) 

Frame size FSH FSH FSJ FSJ FSJ 

Weight, approx. kg (lb) 162 (357.14884) 162 (357.14884) 236 (520.2909) 236 (520.2909) 246 (542.33713) 

2 









2/45



0.75 kW to 630 kW (1 hp to 700 hp) 


2 

■ Characteristic curves 

Derating data 

Pulse frequency 

Frame size Rated power 1) 

at 50 Hz 200 V 3 AC 

Rated output current 2) in A (at an ambient temperature of 45 °C (113 °F)) 

for a pulse frequency of 

kW hp 2kHz 4kHz 6kHz 8kHz 10 kHz 12 kHz 14 kHz 16 kHz 

FSA 0.75 1 4.2 4.2 3.5 2.9 2.5 2.1 1.8 1.6 

1.1 1.5 6 6 5.1 4.2 3.6 3 2.7 2.4 

1.5 2 7.4 7.4 6.2 5.1 4.4 3.7 3.3 2.9 

FSB 2.2 3 10.4 10.4 8.8 7.2 6.2 5.2 4.6 4.1 

3 4 13.6 13.6 11.5 9.5 8.1 6.8 6.1 5.4 

4 5 17.5 17.5 14.8 12.2 10.4 8.7 7.8 7 

FSC 5.5 7.5 22 22 18.7 15.4 13.2 11 9.9 8.8 

7.5 10 28 28 23.8 19.6 16.8 14 12.6 11.2 

FSD 11 15 42 42 35.7 29.4 25.2 21 18.9 16.8 

15 20 54 54 45.9 37.8 32.4 27 24.3 21.6 

18.5 25 68 68 57.8 47.6 40.8 34 30.6 27.2 

FSE 22 30 80 80 68 56 48 40 36 32 

30 40 104 104 88.4 72.8 62.4 52 46.8 41.6 

FSF 37 50 130 130 110.5 91 78 65 58.5 52 

45 60 154 154 130.8 107.8 92.4 77 69.3 61.6 

55 75 192 192 163.2 134.4 115.2 96 86.4 76.8 

The rated output currents in bold apply for the standard pulse frequency. 

1) Rated power based on the base-load current I L . 

The base-load current I L is based on the duty cycle for low overload (LO). 

2) Output current based on the base-load current I L . 





0.75 kW to 630 kW (1 hp to 700 hp) 




at 50 Hz 400 V 3 AC 

Rated output current 2) in A (at an ambient temperature of 45 °C (113 °F)) 



FSA 0.75 1 2.2 2.2 1.87 1.54 1.32 1.1 0.99 0.88 

1.1 1.5 3.1 3.1 2.635 2.17 1.86 1.55 1.395 1.24 

1.5 2 4.1 4.1 3.485 2.87 2.46 2.05 1.895 1.64 

2.2 3 5.9 5.9 5.015 4.13 3.54 2.95 2.655 2.36 

3 4 7.7 7.7 6.545 5.39 4.62 3.85 3.465 3.08 

FSB 4 5 10.2 10.2 8.67 7.14 6.12 5.1 4.59 4.08 

5.5 7.5 13.2 13.2 11.22 9.24 7.92 6.6 5.94 5.28 

7.5 10 18 18 15.3 12.6 10.8 9 8.1 7.2 

FSC 11 15 26 26 22.1 18.2 15.6 13 11.7 10.4 

15 20 32 32 27.2 22.4 19 18 14.4 12.8 

FSD 18.5 25 38 38 32.3 26.6 22.8 19 17.1 15.2 

22 30 45 45 38.2 31.5 27 22.5 20.2 18 

30 40 60 60 51 42 36 30 27 24 

37 50 75 75 63.7 52.5 45 37.5 33.7 30 

FSE 45 60 90 90 76.5 63 54 45 40.5 36 

55 75 110 110 93.5 77 66 55 49.5 44 

FSF 75 100 145 145 123.2 101.5 87 72.5 65.2 58 

90 125 178 178 151 124.6 107 89 80.1 71.2 

110 150 205 143.5 103 82 – – – – 

132 200 250 175 125 100 – – – – 

FSG 160 250 302 211.4 151 121 – – – – 

200 300 370 259 185 148 – – – – 

250 400 477 334 239 191 – – – – 

FSH 3) 315 400 585 468 – – – – – – 

355 450 655 524 – – – – – – 

400 500 735 588 – – – – – – 

FSJ 3) 450 500 840 672 – – – – – – 

500 600 910 728 – – – – – – 

560 700 1021 817 – – – – – – 


2 



2) Frame sizes FSA to FSG: 

Output current based on the base-load current I L . The base-load current I L 

is based on the duty cycle for low overload (LO). Frame sizes FSH and FSJ: 

Output current based on the rated output current I rated . The rated output 

current I rated can be used up to 100 %; 

however, without overload. 

3) In the factory setting, these converters start at a pulse frequency of 4 kHz 

and reduce it automatically under load to the associated required frequencies. 

As the load decreases, the pulse frequency increases automatically 

up to 4 kHz. 


2/47



0.75 kW to 630 kW (1 hp to 700 hp) 



2 


at 50 Hz 690 V 3 AC 

Rated output current in A (at an ambient temperature of 45 °C (113 °F)) 



FSD 3 4 6 3.6 – – – – – – 

4 5 7 4.2 – – – – – – 

5.5 7.5 10 6 – – – – – – 

7.5 10 13 7.8 – – – – – – 

11 10 16 9.6 – – – – – – 

15 15 21 12.6 – – – – – – 

18.5 20 25 15 – – – – – – 

22 25 29 17.4 – – – – – – 

30 30 38 22.8 – – – – – – 

37 40 46 27.6 – – – – – – 

FSE 45 50 58 34.8 – – – – – – 

55 60 68 40.8 – – – – – – 

FSF 75 75 90 54 – – – – – – 

90 100 112 67.2 – – – – – – 

110 125 128 76.8 – – – – – – 

132 150 158 94.8 – – – – – – 

FSG 160 150 196 118 – – – – – – 

200 200 236 142 – – – – – – 

250 250 288 173 – – – – – – 

FSH 2) 315 350 330 215 – – – – – – 

355 400 385 250 – – – – – – 

400 450 420 273 – – – – – – 

450 500 470 306 – – – – – – 

FSJ 2) 500 500 520 338 – – – – – – 

560 600 580 377 – – – – – – 

630 700 650 423 – – – – – – 




2) In the factory setting, these converters start at a pulse frequency of 4 kHz 

and reduce it automatically under load to the associated required frequencies. 

As the load decreases, the pulse frequency increases automatically 

up to 4 kHz. The values of the rated currents apply to a pulse frequency of 

2 kHz and are reached at any time by automatic adaptation of the output 

pulse frequency. 




0.75 kW to 630 kW (1 hp to 700 hp) 




Frame sizes FSA to FSG: 

• Variant PROFINET, EthernNet/IP: 

Permissible output current 

100 

% 

90 

80 

70 

92.5 

79.25 

-20 -10 0 10 20 °C 30 40 45 50 55 60 

(-4) (14) (32) (50) (68)(°F)(86) 

(104) (122) (140) 


Permissible output current as a function of ambient temperature for 

SINAMICS G120X, frame sizes FSA to FSG, for low overload (LO) 

• Variants PROFIBUS DP and USS, Modbus RTU, 

BACnet MS/TP: 

Permissible 

output current 

100 

% 

92.5 

90 

80 

70 

66 

-20 -10 0 10 20 °C 30 40 45 50 55 60 

(-4) (14) (32) (50) (68)(°F)(86) 

(104) (122) (140) 


Permissible output current as a function of ambient temperature for SIN- 

AMICS G120X, frame sizes FSA to FSG, for low overload (LO) 

G_D011_EN_00572 

G_D011_EN_00598 

Installation altitude 

Frame sizes FSA to FSJ: 


100 

% 

90 

80 

70 

60 

0 1000 2000 3000 m 4000 

(3281) (6562) (9843) (ft) (13124) 

Installation altitude above sea level 

Permissible output current as a function of installation altitude for 

SINAMICS G120X for low overload (LO) 

The connected motors, power elements and components must 

be considered separately. 

Permissible line supplies as a function of the installation altitude 

• Installation altitude up to 2000 m (6562 ft) above sea level 

- Connection to every supply system permitted for the 

converter 

• Installation altitudes between 2000 m (6562 ft) and 4000 m 

(13124 ft) above sea level 

- Connection only to a TN system with grounded neutral point 

- TN systems with grounded line conductor are not permitted 

- The TN line system with grounded neutral point can also be 

supplied using an isolation transformer 

- The phase-to-phase voltage does not have to be reduced 

When using converters on TN systems with voltages 600 V and 

at installation altitudes of 2000 m to 4000 m, the TN line supply 

must have a grounded neutral point established using an isolation 

transformer. 

G_D011_EN_00571 

2 

Frame sizes FSH and FSJ: 


100 

% 

90 

85 

80 

70 

0 

(32) 

10 20 30 

(50) (68) (86) 

G_D011_EN_00573 

°C 40 45 50 55 60 

(°F) (104)(113)(122) 

(131)(140) 


Permissible output current as a function of ambient temperature for 

SINAMICS G120X, frame sizes FSH and FSJ, for low overload (LO) 

The operating temperature ranges of the operator panels should 

be taken into account. The temperature ranges are specified in 

the Technical specifications section under Operator panels. 


2/49



0.75 kW to 630 kW (1 hp to 700 hp) 



System operating voltage 

200 V converters frame sizes FSA to FSF: 

400 V converters frame sizes FSH and FSJ: 

110 

% 

2 

Output current 

105 

100 

95 

90 

85 

200 210 220 230 240 

V 

Input voltage 

G_D011_EN_00610 


100 

% 

95 

90 

85 

80 

75 

360 380 400 420 440 460 480 V 500 

Input voltage 

G_D011_EN_00576 

Permissible output current as a function of the input voltage for 

200-V-SINAMICS G120X converters frame sizes FSA to FSF 

400 V converters frame sizes FSA to FSG: 

Output power 

110 

% 

105 

100 

95 

90 

85 

300 380 390 400 415 V 528 

Input voltage 

Permissible output power as a function of the input voltage for 

400-V-SINAMICS G120X converters frame sizes FSA to FSG at 100% 

output current in the range of 380 V to 415 V 

(the temperature protection of the converter can reduce the current or 

pulse frequency above 415 V) 

Output power 

110 

% 

105 

100 

95 

90 

85 

440 450 460 470 480 V 528 

Input voltage 

Permissible output power as a function of the input voltage for 



(the temperature protection of the converter can reduce the current or 

pulse frequency above 480 V) 

Further information is available in the manual on the Internet at: 


G_D011_EN_00612 

G_D011_EN_00611 

Permissible output current as a function of input voltage for 400 V 

SINAMICS G120X converters, frame sizes FSH and FSJ, for low overload 

(LO) 

600 V converters frame sizes FSA to FSG: 

Output power 

100 

% 

95 

90 

85 

80 

75 

72 

70 

500 510 530 550 570 590 610 630 650 670 V 690 

Input voltage 

Permissible output power as a function of input voltage for 



Further information is available in the manual on the Internet at: 


600 V converters frame sizes FSH and FSJ: 


100 

% 

95 

91 

85 

80 

75 

70 

480 500 520 540 560 580 600 620 640 660 V 690 

Input voltage 

Permissible output current as a function of input voltage for 600 V 

SINAMICS G120X converters, frame sizes FSH and FSJ, for low 

overload (LO) 

G_D011_EN_00613 

G_D011_EN_00578 



f 

f 

f 



0.75 kW to 630 kW (1 hp to 700 hp) 


■ Dimensional drawings 

39 160 150 160 

60.5 200 290 200 

(1.54) (6.3) (5.91) (6.3) 

(2.4) (7.87) (11.42) (7.87) 

Ø Ø Ø 

c 

G_D011_EN_00594 

b 

a 

g 

Drill 

pattern 

FSA 

to FSG 

d 

e 

Drill pattern 

FSH 

e 

Drill pattern 

FSJ 

e 

2 

Principle dimension drawing and drill pattern for SINAMICS G120X 

Frame 

size 

Dimensions 

in mm (inches) 

a 

(width) 

FSA 73 

(2.87) 

FSB 100 

(3.94) 

FSC 140 

(5.51) 

FSD 200 

(7.87) 

FSE 275 

(10.83) 

FSF 305 

(12.01) 

FSG 305 

(12.01) 

FSH 548 

(21.57) 

FSJ 801 

(31.54) 

b 

(height) 

232 

(9.13) 

275 

(10.83) 

295 

(11.61) 

472 

(18.58) 

551 

(21.69) 

709 

(27.91) 

999 

(39.33) 

1696 

(66.77) 

1621 

(63.82) 

Drilling dimensions 


49 225 225 

60.5 345 345 

(1.93) (8.86) (8.86) 

(2.38) (13.58) (13.58) 

c d e f g With screws 

(depth) 1) (plus washers 

and nuts) 

209 

(8.23) 

209 

(8.23) 

209 

(8.23) 

239 

(9.41) 

239 

(9.41) 

360 

(14.17) 

360 

(14.17) 

393 

(15.47) 

393 

(15.47) 

55 

(2.17) 

80 

(3.15) 

118 

(4.65) 

170 

(6.69) 

230 

(9.06) 

270 

(10.63) 

265 

(10.43) 

see 

above 

see 

above 

221.5 

(8.72) 

265 

(10.43) 

283 

(11.14) 

430 

(16.93) 

509 

(20.04) 

680 

(26.77) 

970.5 

(38.21) 

1419 

(55.87) 

1399 

(55.08) 

5.5 

(0.22) 

7 

(0.28) 

7 

(0.28) 

15 

(0.59) 

11 

(0.43) 

16.6 

(0.65) 

18.5 

(0.73) 

21 

(0.83) 

21 

(0.83) 

9 

(0.35) 

10 

(0.39) 

11 

(0.43) 

15 

(0.59) 

22.5 

(0.89) 

17.5 

(0.69) 

20 

(0.79) 

see 

above 

see 

above 

5 

(0.2) 

5 

(0.2) 

5.5 

(0.22) 

6 

(0.24) 

6.5 

(0.26) 

8.5 

(0.33) 

12 

(0.47) 

20 

(0.79) 

20 

(0.79) 

Mounting Cooling clearance 2) 


4 × M4 80 

(3.15) 

4 × M4 80 

(3.15) 

4 × M5 80 

(3.15) 

4 × M5 300 

(11.81) 

4 × M6 300 

(11.81) 

4 × M8 300 

(11.81) 

4 × M10 300 

(11.81) 

7 × M8 0 

(0) 

7 × M8 0 

(0) 

top bottom front 

100 

(3.94) 

100 

(3.94) 

100 

(3.94) 

350 

(13.78) 

350 

(13.78) 

350 

(13.78) 

350 

(13.78) 

250 

(9.84) 

250 

(9.84) 

0 

(0) 

0 

(0) 

0 

(0) 

0 

(0) 

0 

(0) 

0 

(0) 

0 

(0) 

100 

(3.94) 

100 

(3.94) 




Further documentation, such as the operating instructions, is 

available free on the Internet at: 


Detailed information on the SINAMICS G120X infrastructure 

converters for HVAC/Water/Wastewater, including the latest 

technical documentation (brochures, tutorials, dimensional 

drawings, certificates and operating instructions), is available on 

the Internet at: 


and is also available via the Drive Technology Configurator (DT 

Configurator) on the Internet. 

The DT Configurator can be found in the Siemens Industry Mall 

at the following address: 


1) Increased depth for frame sizes FSA to FSG: 

• When the operator panel is plugged on, the depth increases 

by 9 mm (0.35 in) 

• When SINAMICS G120 Smart Access is plugged on, the depth increases 

by 7 mm (0.28 in) 

• When the I/O Extension Module is plugged on, the depth increases 

by 27 mm (1.06 in) 

- when, in addition, the operator panel is plugged on, the depth 

increases by a further 11.8 mm (0.46 in) 

- when, in addition, SINAMICS G120 Smart Access is plugged on, the 

depth increases by a further 9.8 mm (0.39 in) 

2) The converters in frame sizes FSA to FSG can be mounted side by side. 

A side clearance of 1 mm (0.04 in) is recommended for tolerance-related 

reasons. A side clearance of 30 mm (1.18 in) is required between the converters 

for frame sizes FSH and FSJ. 


2/51



0.75 kW to 630 kW (1 hp to 700 hp) 

Supplementary system components > Operator panels 

■ Overview 

Operator panel IOP-2 and IOP-2 Handheld Intelligent Operator Panel BOP-2 Basic Operator Panel 

Description 

2 

Possible applications 

Quick commissioning 

without expert knowledge 

High degree of operator 

friendliness and intuitive operation 

Minimization of maintenance times 

Thanks to the high-contrast color display, menu-based operation 

and the wizards, commissioning of the standard drives is easy. 

Application wizards guide the user through the commissioning 

of important applications such as pumps, fans, compressors, 

or conveyor systems. 

• Can be mounted directly on the converter 

• Can be mounted in a control cabinet door using a door 

mounting kit (achievable degree of protection is IP55/ 

UL Type 12 enclosure) 

• Environmental class/harmful chemical substances Class 3C3 

acc. to IEC 60721-3-3: 2002 

• Available as handheld version 

• The following languages are integrated in the IOP-2: 

English, German, French, Italian, Spanish, Portuguese, 

Dutch, Swedish, Finnish, Russian, Czech, Polish, Turkish, 

Chinese Simplified 

• Standard commissioning using the clone function 

• For quicker access, the parameter block names can be 

directly entered respectively changed on the IOP-2 using 

the virtual keyboard. 

• User-defined parameter list with a reduced number of 

self-selected parameters 

• Simple commissioning of standard applications using 

Quick Startup and Advanced Startup; it is not necessary to know 

the parameter structure 

• Simple local commissioning using the handheld version 

• Commissioning is possible largely without documentation 

• Intuitive navigation by operating with a sensor control field 

• Graphic color display to show status values such as pressure 

or flow rate in the form of scalar values, bar-type diagrams, or 

trend displays 

• Status display with freely selectable units to specify physical 

values 

• Direct manual operation of the drive – you can simply toggle 

between the automatic and manual modes 

• Simple cloning of specific settings of the IOP-2 user interface. 

• Diagnostics using plain text display, can be used locally on-site 

without documentation 

• The support function is used to determine the drive data for the 

Power Module, Control Unit and IOP-2 and makes this available 

as a two-dimensional code (data matrix/QR code) 

• Easily upgradable to new functional status via USB interface 

Commissioning of standard drives is easy with the 

menu-prompted dialog on a 2-line display. Simultaneous 

display of the parameter and parameter value, 

as well as parameter filtering, means that basic 

commissioning of a drive can be performed easily 

and, in most cases, without a printed parameter list. 

• Can be mounted directly on the converter 

• Can be mounted in the control cabinet door using a 

door mounting kit (achievable degree of protection 

is IP55/UL Type 12) 

• Environmental class/harmful chemical substances 


• Standard commissioning using the clone function 

• 2-line display for showing up to 2 process values 

with text 

• Status display of predefined units 

• Direct manual operation of the drive – you can 

simply toggle between the automatic and manual 

modes 

• Diagnostics with menu prompting with 7-segment 

display 




0.75 kW to 630 kW (1 hp to 700 hp) 

Supplementary system components > IOP-2 Intelligent Operator Panel 

■ Overview 


Updating the IOP-2 

The IOP-2 can be updated and expanded using the integrated 

USB interface. 

Data to support future drive systems can be transferred from 

the PC to the IOP-2. Further, the USB interface allows user 

languages and simple setup processes that will become available 

in the future to be subsequently downloaded and the firmware 

to be updated for the IOP-2 1) . 

The IOP-2 is supplied with power via the USB interface during an 

update. 


2 


The Intelligent Operator Panel IOP-2 is a very user-friendly and 

powerful operator panel for the SINAMICS G120, 

SINAMICS G120C, SINAMICS G120P, SINAMICS G120X, 

SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and 

SIMATIC ET 200pro FC-2. 

The IOP-2 supports both newcomers and drive experts. Thanks 

to the membrane keyboard with a central sensor control field, 

high-contrast color displays, menu-based operation and simple 

setup processes, which do not require special drive know-how, 

it is easy to commission drives. The updated IOP-2 (from V2.3) 

offers a new concept, which allows faster and easier commissioning 

of the drive. 

The Quick Startup provides with an overview of the basic parameters 

required to commission and operate the drive in a few 

minutes. 

Advanced Startup supports easier commissioning of more complex 

applications and provides the parameters on one screen, 

thus eliminating the need to switch between different areas 

within the IOP-2. 

Advanced Setup provides with a list of categories that needs to 

be checked and that guides the user by highlighting the status 

icons of categories, which have been altered by the user. 

Furthermore, a drive can be essentially commissioned without 

having to use a printed parameter list – as the parameters are 

displayed in plain text, and explanatory help texts and the parameter 

filtering functions are provided. 

The status screen allows the graphical visualization of two process 

values and the numerical visualization of four process values. 

Process values can also be displayed in technological 

units. 

The IOP-2 supports standard commissioning of identical drives. 

For this purpose, a parameter list can be copied from a converter 

into the IOP-2 and downloaded into other drive units of the 

same type as required. 

The IOP-2 can be installed in control cabinet doors using the 

optionally available door mounting kit. 


A handheld version of the IOP-2 can be ordered for mobile use. 

In addition to the IOP-2, it includes a housing with rechargeable 

batteries, a charging unit, an RS232 connecting cable, and a 

USB cable. The charging unit is supplied with connector 

adapters for Europe, the US and UK. When the batteries are 

fully charged, the operating time is up to 10 hours. 

To connect the IOP-2 Handheld to SINAMICS G110D, 

SINAMICS G120D, SINAMICS G110M and 

SIMATIC ET 200pro FC-2, the RS232 connecting cable with 

optical interface is required in addition. 

1) Information on updates for the IOP-2 is available at https://support.industry.siemens.com/cs/document/67273266 


2/53



0.75 kW to 630 kW (1 hp to 700 hp) 


2 


Description 


For use with 

SINAMICS G120 

SINAMICS G120C 

SINAMICS G120P 


SINAMICS G110D 


SINAMICS G110M 

SIMATIC ET 200pro FC-2 

Operating languages: English, German, 

French, Italian, Spanish, Portuguese, 

Dutch, Swedish, Finnish, Russian, Czech, 

Polish, Turkish, Chinese Simplified 


For use with 

SINAMICS G120 








Included in the scope of delivery: 

•IOP-2 

• Handheld housing 

• Rechargeable batteries (4 × AA) 

• Charging unit (international) 

• RS232 connecting cable 1) 

3 m (9.84 ft) long, 

can be used in combination with 

SINAMICS G120 




•USB cable 

1 m (3.28 ft) long 

Accessories 


For mounting an operator panel in 

control cabinet doors with sheet steel 

thicknesses of 1 ... 3 mm (0.04 in ... 0.12 in) 

Degree of protection IP55 


•Seal 

• Mounting material 

• Connecting cable 

5 m (16.4 ft) long, 

also supplies voltage to the IOP-2 

directly via the converter 

RS232 connecting cable 

2.5 m (8.20 ft) long, 

with optical interface for connecting the 

IOP-2 Handheld to 





Article No. 

6SL3255-0AA00-4JA2 

6SL3255-0AA00-4HA1 

6SL3256-0AP00-0JA0 

3RK1922-2BP00 

■ Benefits 

• New device design 

- Intuitive user interface – membrane keyboard with central 

sensor control field 

- High-contrast color display with a range of display options 

- IOP-2 device design open for future functional expansions 

(e.g. device functions, commissioning setups, languages) 

- Easily upgradable to new functional status via USB interface 

• Commissioning 

- Simple commissioning via Quick Startup and Advanced 

Startup 

- Quick Startup allows easy and fast access to all basic 

parameters required for the commissioning of simple 

applications 

- Advanced Startup provides the parameters necessary for 

the commissioning of more complex applications and eliminates 

the need to switch between different areas of the IOP-2 

- I/O Setup supports quick and easy configuration of the 

digital and analog inputs and outputs 

- Fieldbus Setup allows easy configuration of the Ethernet/IP 

and PROFINET interface protocols 

- Fast standard commissioning of converters thanks to the 

cloning function 

- For quicker access, the parameter data set names can be 

directly entered respectively changed on the IOP-2 using the 

virtual keyboard. Extended help functions support the user 

during commissioning. 

- Simple local commissioning on-site using the handheld 

version 

• Operator control and monitoring 

- Simple, individual local drive control (start/stop, setpoint 

value specification, change in direction of rotation) 

- Application-specific scenarios such as operator concepts 

with additional external operating elements can be 

implemented easily 

- Simple cloning of specific settings of the IOP-2 user 

interface, such as status screen, language settings, lighting 

duration, date/time settings, parameter backup mode and 

“My Parameters” – settings made once can such be easily 

transferred to many further IOP-2 Intelligent Operator Panels 

• Diagnostics 

- Rapid diagnostics thanks to on-site plain text display 

- Integrated plain text help function for local display and 

resolution of fault messages 

• Support function 

- Used to determine the drive data for the Power Module, 

Control Unit and IOP-2 (article number, serial number, 

firmware version, error statuses) and makes this available as 

a two-dimensional code (data matrix/QR code) 

- Allows easy contact with Customer Support via a data 

matrix/QR code generated on the IOP-2 

- Quick access via mobile devices (e.g. smartphones, tablets) 

to product information, documentation, FAQs, contact 

persons via a two-dimensional code generated on the IOP-2 

(data matrix/QR code) 

- Scanning and evaluating of the two-dimensional data matrix 

code using the Industry Online Support app 

(https://support.industry.siemens.com/cs/ww/en/sc/2067), 

see also: 


1) For use in conjunction with SINAMICS G110D, SINAMICS G120D, 

SINAMICS G110M and SIMATIC ET 200pro FC-2, the RS232 connecting 

cable with optical interface is required (Article No.: 3RK1922-2BP00). 

The cable must be ordered separately. 




0.75 kW to 630 kW (1 hp to 700 hp) 



Using the IOP-2 with the converters 

Plugging the IOP-2 

onto the converter 

(Voltage supply via 

converter) 

Door mounting of the 

IOP-2 with the door 

mounting kit 

(Voltage supply via 

converter. For this 

purpose, the IOP-2 

must be connected 

up by means of the 

connecting cable 

supplied with the 

door mounting kit.) 

Mobile use of the 


(supplied from 

rechargeable batteries) 

Door mounting 

• SINAMICS G120 

with CU230P-2, 

CU240E-2 or 

CU250S-2 

• SINAMICS G120C 

• SINAMICS G120P 

with CU230P-2 

• SINAMICS G120X 

– 

– 

 

• SINAMICS G110D 

• SINAMICS G120D 

• SINAMICS G110M 

• SIMATIC ET 200pro 

FC-2 

(RS232 connecting 

cable with optical 

interface required, 

article number 

3RK1922-2BP00) 

Using the optionally available door mounting kit, an operator 

panel can be simply mounted in a control cabinet door with 

just a few manual operations. In the case of door mounting, 

the IOP-2 Operator Panel achieves degree of protection 

IP55/UL Type 12 enclosure. 

Bolt 

Door mounting bracket 

Door plate 

Sealing sleeve 

Operator 

Panel 


Display 

• Resolution 

Operator panel 

Operating languages 


• During transport 

and storage 

• During operation 

Humidity 


Dimensions 

(H × W × D) 

IOP-2 

6SL3255-0AA00-4JA2 


6SL3255-0AA00-4HA1 

High-contrast color display, a variety of 

display options 

320 × 240 pixels 

Membrane keyboard with central sensor 

control field 

English, German, French, Italian, Spanish, 

Portuguese, Dutch, Swedish, Finnish, Russian, 

Czech, Polish, Turkish, Chinese Simplified 

-40...+70°C 

(-40 ... +158 °F) 

For direct mounting 

on the converter: 

0...50°C 

(32 ... 122 °F) 

For installation with 

door mounting kit: 

0...55°C 

(32 ... 131 °F) 

-20 ... +55 °C 

(-4 ... +131 °F) 

0...40°C 

(32 ... 104 °F) 

Relative humidity < 95 %, non-condensing 

For direct mounting IP20 

on the converter: 

IP20 

For installation with 

door mounting kit: 

IP55, UL Type 12 

enclosure 

106.86 × 70 × 

19.65 mm 

(4.21 × 2.76 × 0.77 in) 

195.04 × 70 × 

37.58 mm 

(7.68 × 2.76 × 1.48 in) 

Weight, approx. 0.134 kg (0.3 lb) 0.724 kg (1.6 lb) 

Compliance with CE, RCM, cULus, EAC, KC-REM-S49-SINAMICS 

standards 

Environmental class 

in operation 

• Harmful chemical Class 3C3 acc. to IEC 60721-3-3: 2002 

substances 

2 

Fixing screws 

D type 

G_D011_EN_00531 

Door mounting kit with plugged-on IOP-2 


2/55



0.75 kW to 630 kW (1 hp to 700 hp) 

Supplementary system components > BOP-2 Basic Operator Panel 

■ Overview 


2 

Description 


Accessories 


For mounting an operator panel in 

control cabinet doors with sheet steel 

thicknesses of 1 ... 3 mm (0.04 ... 0.12 in) 

Degree of protection IP55 


•Seal 

• Mounting material 

• Connecting cable 

5 m/16.4 ft long, also supplies voltage 

to the operator panel directly via the 

converter 

Article No. 

6SL3255-0AA00-4CA1 

6SL3256-0AP00-0JA0 


The BOP-2 Basic Operator Panel can be used to commission 

drives, monitor drives in operation and input individual 

parameter settings. 

Commissioning of standard drives is easy with the menuprompted 

dialog on a 2-line display. Simultaneous display of the 

parameter and parameter value, as well as parameter filtering, 

means that basic commissioning of a drive can be performed 

easily and, in most cases, without a printed parameter list. 

The drives are easily controlled manually using directly assigned 

navigation buttons. The BOP-2 has a dedicated switchover 

button to switch from automatic to manual mode. 

Diagnostics can easily be performed on the connected converter 

by following the menus. 

Up to two process values can be numerically visualized 

simultaneously. 

BOP-2 supports standard commissioning of identical drives. 

For this purpose, a parameter list can be copied from a converter 

into the BOP-2 and when required, downloaded into other 

drive units of the same type. 

The operating temperature of the BOP-2 is 0 °C ... 50 °C 

(32 °F ... 122 °F). 

The environmental class/harmful chemical substances of BOP-2 

is class 3C3 acc. to IEC 60721-3-3: 2002. 

■ Benefits 

• Shorten commissioning times – Easy commissioning of 

standard drives using basic commissioning wizards (setup) 

• Minimize standstill times – Fast detection and rectification of 

faults (Diagnostics) 

• Greater transparency in the process – The status display of 

the BOP-2 makes process variable monitoring easy 

(Monitoring) 

• Direct mounting on the converter 

• User-friendly user interface: 

- Easy navigation using clear menu structure and clearly 

assigned control keys 

- Two-line display 




0.75 kW to 630 kW (1 hp to 700 hp) 

Supplementary system components > Memory cards 

■ Overview 


Description 


512 MB, empty 

Article No. 

6SL3054-4AG00-2AA0 

2 

SINAMICS SD memory card 

The parameter settings for a converter can be stored on the 

SINAMICS SD memory card. When service is required, e.g. after 

the converter has been replaced and the data have been downloaded 

from the memory card, the drive system is immediately 

ready for use again. 

• Parameter settings can be written from the memory card to the 

converter or saved from the converter to the memory card. 

• Up to 100 parameter sets can be stored. 

• The memory card supports standard commissioning without 

the use of an operator panel such as the IOP-2 or BOP-2. 

• If firmware is stored on the memory card, the firmware can be 

upgraded/downgraded during power-up. 

Note: 

The memory card is not required for operation and does not 

have to remain inserted. 


2/57



0.75 kW to 630 kW (1 hp to 700 hp) 

Supplementary system components > SINAMICS G120 Smart Access 

■ Overview 


2 


It is also easy and convenient to commission and operate the 

SINAMICS G120, SINAMICS G120C and SINAMICS G120X 

converters of firmware V4.7 SP6 and higher using the web server 

module SINAMICS G120 Smart Access and a connected 

smartphone, tablet or laptop. 

■ Benefits 

• Wireless commissioning, operation and diagnostics via 

mobile device or laptop thanks to the optional 


• Easy access to the converter in difficult-to-access areas 

• Intuitive user interface and commissioning wizard 

• Free choice of terminal devices as the web server works with 

all common web browsers, such as iOS, Android, Windows, 

Linux and Mac OS 

■ Function 

• Commissioning using commissioning wizard 

• Setting and saving parameters 

• Testing motor in JOG mode 

• Monitoring of converter data 

• Quick diagnostics 

• Saving the settings and restoring to factory settings 


Operating system 

Languages 


• During storage and transport 

• During operation 

Humidity 


Dimensions 

•Width 

•Height 

•Depth 

Weight, approx. 

Compliance with standards 


SINAMICS G120 

Smart Access 

6SL3255-0AA00-5AA0 

iOS, Android, Windows, Linux, 

Mac OS 

Support of six languages: 

English, French, German, 

Italian, Spanish, Chinese 

-40...+70°C 

(-40 ... +158 °F) 

0 ... 50 °C (32 ... 122 °F) 

if the Smart Access is plugged 

directly into the converter 

< 95 %, non-condensing 

Depending on the degree of 

protection of the converter, 

max. IP55/UL Type 12 

enclosure 

70 mm (2.76 in) 

108.9 mm (4.29 in) 

17.3 mm (0.68 in) 

0.08 kg (0.18 lb) 

CE, FCC, SRRC, WPC, 

ANATEL, BTK 

Description 


For wireless commissioning, operation and 

diagnostics of the following converters 

using a smartphone, tablet or laptop 


• SINAMICS G120 together with the 

CU230P-2 and CU240E-2 Control Units 

(without fail-safe versions) 


Article No. 

6SL3255-0AA00-5AA0 

SINAMICS G120X frame size FSD with plugged-on 


The optional SINAMICS G120 Smart Access is simply plugged 

onto the converter and is available for the following converters of 

firmware V4.7 SP6 and higher. 


• SINAMICS G120 together with the CU230P-2 and CU240E-2 

Control Units (without fail-safe versions) 




■ Overview 


0.75 kW to 630 kW (1 hp to 700 hp) 

Supplementary system components > SINAMICS CONNECT 300 IoT Gateway 

The optional SINAMICS CONNECT 300 IoT Gateway is suitable 

for SINAMICS V20, SINAMICS G120C, SINAMICS G120, 

SINAMICS G120X, MICROMASTER 420, MICROMASTER 430 

and MICROMASTER 440 converters. 

The converter system is thus fit for digitalization. Thanks to its full 

integration in the SINAMICS CONNECT 300 system, data from 

up to eight converters can be acquired and transferred to the 


"Analyze MyDrives" facilitates the evaluation of data – tailored to 



Scope of delivery: 

• One SINAMICS CONNECT 300 IoT Gateway device with one 

mounted DC terminal block for connecting to 9 V DC to 

36 V DC power supply 

• Quick Installation Guide in English language 

For more technical information see 

https://support.industry.siemens.com/cs/us/en/ps/25436 

2 


Example: SINAMICS G120 with connected 


■ Benefits 

• The integrated web server with its setup wizard ensures a simple 

and easy commissioning of the device. 

• The standard MindSphere tools assure a smooth integration of 

the drives into the MindSphere world. 

• Eight RS232 ports to connect 8 different drives simultaneously 

• Up to 40 drive parameters can be transferred to MindSphere 

at the same time. The dedicated parameters can be selected 

via a search functionality. 

• Point-to-point connection via RS232 prevents that additional 

load is put to the drive controller and to the fieldbus communication. 

• Continuous display of the actual MindSphere connectivity 

state in the web server 

• Comprehensive connection to MindSphere on AWS, 

MindSphere on AZURE and MindSphere on ALIBABA Cloud 

• 500 MByte data buffer secures the data from loss if the 

Internet connection is interrupted. 

• Comprehensive service management of the device via the 

integrated web server (CA certificates, license management, 

firmware updates, automatic validation of the configuration, 

etc.) 

• Easy top hat rail mounting 

• Perfect system harmonization with Analyze My Drives 

MindSphere App 

• Secure communication to MindSphere by using 

https-tunnelling 


Description 

SINAMICS CONNECT 300 IoT 

Gateway 

for connecting the following 

converters to the MindSphere cloud: 

• SINAMICS V20 


• SINAMICS G120 


• MICROMASTER 420 / 

MICROMASTER 430 / 

MICROMASTER 440 

NEW NEU 

Article No. 

6SL3255-0AG30-0AA0 

Example: SINAMICS G120X with connected 



2/59



0.75 kW to 630 kW (1 hp to 700 hp) 

Supplementary system components > SINAMICS G120X I/O Extension Module 

2 

■ Overview 

SINAMICS G120X I/O Extension Module 

The SINAMICS G120X I/O Extension Module increases the number 

of I/O terminals of the converter and therefore allows for 

additional converter control functionalities. It also allows for the 

connection to an operator panel or the SINAMICS G120 Smart 

Access. 

The optional SINAMICS G120X I/O Extension Module has 2 DI, 

2 AO, 4 DO (relay), and up to 2 Pt1000/Ni1000 temperature 

sensors can be directly connected. 

Notes: 

The SINAMICS G120X I/O Extension Module is only supported 

for SINAMICS G120X converters with FS codes 02 02 (FSA to 

FSG) / 02 (FSH and FSJ) and firmware V1.01. 

The FS code can be found on the rating plate of the converter. 


Description 

SINAMICS G120X I/O Extension 

Module 

for the direct connection of 

Pt1000/Ni1000 temperature sensors 

NEW NEU 

Article No. 

6SL3255-0BE00-0AA0 


Further information and documentation is available on the 

Internet at: 



Article No. 

6SL3255-0BE00-0AA0 

Analog inputs 

Number of analog inputs 2 

Design of the sensor to detect the 

ambient temperature connectable 

Connectable conductor cross-section at 

the analog input 

AWG number as coded connectable 

conductor cross-section at the analog 

input 

Input current 

Analog outputs 

2 analog inputs for connecting temperature 

sensors Pt1000/Ni1000. 

One of them can be used as an 

analog input. 

0.5 ... 1.5 mm² 

21 ... 16 

0...20mA 

Number of analog outputs 2 

Analog outputs Type 

Non-isolated output 

Connectable conductor cross-section at 0.5 ... 1.5 mm² 

the analog output 

AWG number as coded connectable 21 ... 16 

conductor cross-section at the analog 

output 

Output voltage at analog output 0...10V 

Output current at analog output 0...20mA 

Digital inputs 

Number of digital inputs 2 

Connectable conductor cross-section at 0.5 ... 1.5 mm² 

the digital inputs 

AWG number as coded connectable 21 ... 16 

conductor cross-section at the digital 

inputs 

Digital inputs Input voltage for signal 

"0" "1" 

Digital inputs Input voltage for signal 

"1" "0" 

Input voltage at digital input maximum 

Digital outputs 

11 V 

5V 

30 V 

Number of digital outputs 4 

Connectable conductor cross-section at 1.5 mm² 

the digital outputs maximum 

AWG number as coded connectable 16 

conductor cross section at the digital 

outputs maximum 

Output current at digital output 

Mechanical data 

Width 

Depth 

Height 

2A 

71 mm 

27 mm 

117 mm 





0.75 kW to 630 kW (1 hp to 700 hp) 

■ Overview 

Supplementary system components > Push-through mounting frames for frame sizes FSA to FSG 

For push-through installation of frame sizes FSD to FSG, installation 

handles are available for insertion without the need for a 

lifting device. 

SINAMICS G120X frame size FSC with IOP-2 Intelligent Operator Panel 

and push-through mounting frame 

The optional push-through mounting frame is used to install a 

SINAMICS G120X converter, frame sizes FSA to FSG, in a control 

cabinet with the heat sink outside the control cabinet. The 

converter achieves degree of protection IP20/UL Open Type 

with push-through installation. 


Description 

Article No. 

Push-through mounting frames 


• Frame size FSA 6SL3261-6GA00-0BA0 

• Frame size FSB 6SL3261-6GB00-0BA0 

• Frame size FSC 6SL3261-6GC00-0BA0 

• Frame size FSD 6SL3261-6GD00-0BA0 

• Frame size FSE 6SL3261-6GE00-0BA0 

• Frame size FSF 6SL3261-6GF00-0BA0 

• Frame size FSG 6SL3261-6GG00-0BA0 

Accessories 

Installation handles 

6SL3200-0SM22-0AA0 


frame sizes FSD to FSF 

2 

Supplementary system components 

> IP21 top covers for frame sizes FSA to FSG 

■ Overview 

■ Dimensional drawings 

a 

d 

c 

b 

Ø 

c 

G_D011_XX_00590 

SINAMICS G120X frame size FSC with IOP-2 Intelligent Operator Panel 

and IP21 top cover 

Using the optional IP21 top cover, SINAMICS G120X converters 

in frame sizes FSA to FSG achieve degree of protection 21. With 

wall mounting, the IP21 top cover has to be installed above the 

converter. 


Description 

Article No. 

IP21 top covers 


• Frame size FSA 6SL3266-1PA00-0BA0 

• Frame size FSB 6SL3266-1PB00-0BA0 

• Frame sizes FSC and FSD 6SL3266-1PD00-0BA0 

• Frame size FSE 6SL3266-1PE00-0BA0 

• Frame sizes FSF and FSG 6SL3266-1PF00-0BA0 

Frame 

size 

Dimensions 


a 

(width) 

FSA 120 

(4.72) 

FSB 160 

(6.3) 

FSC 260 

(10.24) 

FSD 260 

(10.24) 

FSE 335 

(13.19) 

FSF, FSG 365 

(14.37) 

b c 

(height) (depth) 

25 

(0.98) 

25 

(0.98) 

29 

(1.14) 

29 

(1.14) 

29 

(1.14) 

29 

(1.14) 

306 

(12.05) 

306 

(12.05) 

323 

(12.72) 

323 

(12.72) 

323 

(12.72) 

443 

(17.44) 

Drilling 

dimensions 


Cooling clearance 

d between converter 

and IP21 top cover 

80 

(3.15) 

118 

(4.65) 

170 

(6.69) 

170 

(6.69) 

230 

(9.06) 

270 

(10.63) 

4.5 

(0.18) 

5.5 

(0.22) 

6 

(0.24) 

6 

(0.24) 

6 

(0.24) 

6 

(0.24) 

100 

(3.94) 

100 

(3.94) 

100 

(3.94) 

300 

(11.81) 

300 

(11.81) 

300 

(11.81) 



2/61



0.75 kW to 630 kW (1 hp to 700 hp) 

Supplementary system components > Wiring adapter for frame size FSG 

■ Overview 


2 

Wiring adapter for frame size FSG 

The wiring adapter enables optimal and space-saving wiring of 

frame size FSG for SINAMICS G120 PM240-2 Power Modules 

and SINAMICS G120X. 

Up to four smaller cables (with a cross section of 120 mm2 each) 

can be routed with the adapter for connection to the line supply 

and to the motor. All cables can be connected on the underside 

of the adapter, which allows for easy and space-saving wiring. 

The scope of delivery of the wiring adapter includes contacts, 

nuts, a cover and various small components. 

SINAMICS G120 frame size FSG with wiring adapter (and cable outlet) 

SINAMICS G120X frame size FSG with wiring adapter (and cable outlet) 

Further documentation on SINAMICS G120 is available free on 


www.siemens.com/sinamics-g120/documentation 

Further documentation on SINAMICS G120X is available free on 




Description 

Wiring adapter for frame size FSG 

for optimal and space-saving wiring 

of SINAMICS G120 PM240-2 Power 

Modules and SINAMICS G120X 

NEW NEU 

Article No. 

6SL3266-2HG00-0BA0 





0.75 kW to 630 kW (1 hp to 700 hp) 

Supplementary system components > Installation kit for line-side cable connection, left, for frame size FSH 

■ Overview 


Description 

Installation kit for line-side cable 

connection, left 


frame size FSH 

Article No. 

6SL3366-1LH00-0PA0 

2 

Installation kit for line-side cable connection, left, for SINAMICS G120X, 

frame size FSH 

This installation kit allows supply cables of the SINAMICS G120X 

converter, frame size FSH, to be connected alternatively on the 

left-hand side of the converter. The converter can thus be installed 

higher in the control cabinet, allowing more efficient use 

of the available cabinet space. In many cases, use of this installation 

kit also helps in the implementation of effective cabinet 

cooling. 

Spare parts 

> FPI board for frame sizes FSH and FSJ 

■ Overview 


The FPI board (freely-programmable interface board) is available 

as a spare part for the SINAMICS G120X converter, frame 

Description 

FPI board 

sizes FSH and FSJ. This is an interface board between Control 


Unit and Power Module with additional customer terminals 

frame sizes FSH and FSJ 

(X9, X41). 

Article No. 

6SL3200-0SP05-0AA0 

Spare parts 

> PSB board for frame sizes FSH and FSJ 

■ Overview 

The PSB board (power supply board) is available as a spare part 

for the SINAMICS G120X converter, frame sizes FSH and FSJ. 

This is an internal power supply with ±24 V for the electronics 

and 56 V for a power unit fan. 


Description 

PSB board 


frame sizes FSH and FSJ 

Article No. 

6SL3200-0SP06-0AA0 

Spare parts 

> Current transformers for frame sizes FSH and FSJ 

■ Overview 


Current transformers are available as spare parts for the 

Description 

Article No. 

SINAMICS G120X converter, frame sizes FSH and FSJ. These 

Current transformers 

are 2000 A or 1000 A current transformers for measuring the motor 

current at the device output. The current transformers are 


used for motor control and converter protection. 

• 2000 A for frame size FSJ 6SL3200-0SE01-0AA0 

• 1000 A for frame sizes FSH and FSJ 6SL3200-0SE02-0AA0 


2/63



0.75 kW to 630 kW (1 hp to 700 hp) 

Spare parts > Spare parts kit for Control Unit 

■ Overview 


2 

The spare parts kit contains small parts for the SINAMICS G120X 

Control Unit: 


• 1 STO connecting plug for frame sizes FSA to FSC 

• 3 replacement doors for the Control Unit 

• 4 I/O terminals 

• 1 screw for RS485 terminal 

• 1 blanking cover 

• Label set 

Description 

Spare parts kit for Control Unit 


Article No. 

6SL3200-0SK10-0AA0 

Spare parts 

> Shield connection kit for Control Unit 

■ Overview 


A shield connection kit for the Control Unit is supplied with the Description 

SINAMICS G120X converters, frame sizes FSD to FSG. It is advisable 

to install the supplied shield connection kit for EMC-com- 

Shield connection kit for 

Control Unit 

pliant configuration of the converter. This shield connection kit for SINAMICS G120X 

can be ordered as a spare part. 

frame sizes FSD to FSG 

The shield connection kit offers optimum shield connection and 

strain relief for all signal and communication cables. 

The kit contains the following: 

• a matching shield connection plate 

• all of the necessary connecting and retaining elements for 

mounting 

Article No. 

6SL3264-1EA00-0YA0 

Spare parts 

> Shield connection kits for Power Module 

■ Overview 

A shield connection kit is supplied with the SINAMICS G120X 


Description 

Article No. 

converters, frame sizes FSA to FSG. It is advisable to install the Shield connection kits for 

supplied shield connection kit for EMC-compliant configuration Power Module 

of the converter. These shield connection kits can be ordered as 

spare parts. 

Please observe the notes included in the operating instructions 

for the SINAMICS G120X converters, frame sizes FSH and FSJ. 







6SL3262-1AA01-0DA0 

6SL3262-1AB01-0DA0 

6SL3262-1AC01-0DA0 

6SL3262-1AD01-0DA0 

• Frame size FSE 6SL3262-1AE01-0DA0 

• Frame size FSF 6SL3262-1AF01-0DA0 

• Frame size FSG 6SL3262-1AG01-0DA0 

Spare parts 

> Small parts assembly set for frame sizes FSD to FSG 

■ Overview 

A small parts assembly set can be ordered for SINAMICS 

G120 Power Modules PM240-2, SINAMICS G120C and 

SINAMICS G120X, degree of protection IP20. It contains the 

following parts: 

• Cable entries for frame sizes FSD to FSG 

• 2 × 2 pin STO mating connector 

• 1 set of warning labels in 30 languages 


Description 

Small parts assembly set 

for SINAMICS G120 Power Modules 

PM240-2, SINAMICS G120C and 


degree of protection IP20, 

frame sizes FSD to FSG 

Article No. 

6SL3200-0SK08-0AA0 





0.75 kW to 630 kW (1 hp to 700 hp) 

Spare parts > Terminal cover kits for frame sizes FSD to FSG 

■ Overview 


The terminal cover kit includes a replacement cover for the 

connecting terminals. 

Terminal cover kits, which are suitable for the following 

converters in frame sizes FSD to FSG, are available: 

• SINAMICS G120 PM240-2 Power Modules 

• SINAMICS G120 PM250 Power Modules 



Description 


for SINAMICS G120 PM240-2 

Power Modules 

• for frame size FSD 

• for frame size FSE 

• for frame size FSF 

• for frame size FSG 


for SINAMICS G120 PM250 

Power Modules 

Article No. 

6SL3200-0SM13-0AA0 

6SL3200-0SM14-0AA0 

6SL3200-0SM15-0AA0 

6SL3200-0SM16-0AA0 

2 

• for frame sizes FSD and FSE 

6SL3200-0SM11-0AA0 


6SL3200-0SM12-0AA0 


for SINAMICS G120C 


6SL3200-0SM13-0AA0 


6SL3200-0SM14-0AA0 


6SL3200-0SM15-0AA0 




6SL3200-0SM13-0AA0 


6SL3200-0SM14-0AA0 


6SL3200-0SM15-0AA0 

• for frame size FSG 

6SL3200-0SM16-0AA0 

Spare parts 

> Fan units 

■ Overview 

The fans of the SINAMICS G120X converters are designed for 

extra long service life. For special requirements, replacement 

fans are available that can be exchanged quickly and easily. 


Description 

External fan units 










Internal fan unit 



Article No. 

6SL3200-0SF52-0AA0 

6SL3200-0SF53-0AA0 

6SL3200-0SF54-0AA0 

6SL3200-0SF15-0AA0 

6SL3200-0SF16-0AA0 

6SL3200-0SF17-0AA0 

6SL3200-0SF18-0AA0 

6SL3300-0SF01-0AA0 

6SL3200-0SF50-0AA0 

Spare parts 

> Control Units 

■ Overview 

Control units are available as spare parts for the SINAMICS 

G120X convertes frame sizes FSD to FSJ. 


Description 

Control Units 


frame sizes FSD to FSJ 

• USS, Modbus RTU, BACnet MS/TP 

• PROFINET, EtherNet/IP 

•PROFIBUS DP 

Article No. 

6SL3200-0SC10-0BA0 

6SL3200-0SC10-0FA0 

6SL3200-0SC10-0PA0 



2/65



0.75 kW to 630 kW (1 hp to 700 hp) 

Notes 

2 




3 

SINAMICS SELECTOR App 

Mobile selection guide for frequency 

converters 

Siemens has developed the SINAMICS 

SELECTOR app as a practical tool for 

finding article numbers for your SINAMICS 

converter in the power range from 

0.12 kW to 630 kW quickly and easily. 

Whether for SINAMICS V20, SINAMICS 

G120C, SINAMICS G120P, SINAMICS 

G120X or SINAMICS G120: The app will 

provide you with the correct article numbers 

conveniently. 

How does it work? Simply select your application, 

the frequency converter you require, 

the rated power and device options 

as well as the necessary accessories. 

Then you can save your selection and 

send it by email. The preselection serves 

as the basis for an order specification with 

the dealer/Siemens. 

You will find free downloads for Android 

and iOS here: 

www.siemens.com/sinamics-selector 

SINAMICS ASSISTANT app 

The error code function of the 

SINAMICS ASSISTANT app helps you to 

identify and rectify errors. Just enter the 

error code of your frequency converter 

and the app shows you what sort of error it 

is and how you can rectify it. 

This app also recalculates for you the 

frequency (Hz) of a frequency converter 

into the speed to be set on the motor (rpm) 

or vice versa. 

In addition this app offers you a support 

page on which you can get in touch 

straight away with the right contact person 

in your region if you have any questions. 

Furthermore, video information is available 

to you free of charge, e.g. on installation 

and commissioning of the 

SINAMICS G120 frequency converter. 

You will find the free downloads for 

Android and for iOS at the following link: 

www.siemens.com/sinamics-assistant 

3/2 Drive Technology Configurator 

3/3 SIMARIS planning tools for systems with 

SINAMICS drives 

3/5 SinaSave energy efficiency tool 

3/6 SIZER for Siemens Drives 

engineering tool 

3/7 SINAMICS web server for 

SINAMICS G120X via 


Security information 

Siemens provides products and solutions 

with industrial security functions that 

support the secure operation of plants, 

systems, machines and networks. 

In order to protect plants, systems, machines 

and networks against cyber threats, 

it is necessary to implement – and continuously 

maintain – a holistic, state-of-the-art 

industrial security concept. Siemens’ 

products and solutions constitute one 

element of such a concept. 

Customers are responsible for preventing 

unauthorized access to their plants, 

systems, machines and networks. Such 

systems, machines and components 

should only be connected to an enterprise 

network or the internet if and to the extent 

such a connection is necessary and only 

when appropriate security measures 

(e.g. firewalls and/or network segmentation) 

are in place. 

For additional information on industrial 

security measures that may be implemented, 

please visit 

https://www.siemens.com/industrialsecurity 

Siemens’ products and solutions undergo 

continuous development to make them 

more secure. Siemens strongly recommends 

that product updates are applied as 

soon as they are available and that the 

latest product versions are used. Use of 

product versions that are no longer supported, 

and failure to apply the latest updates 

may increase customer’s exposure 

to cyber threats. 

To stay informed about product updates, 

subscribe to the Siemens Industrial 

Security RSS Feed under 





Drive Technology Configurator 

■ Overview 


The Drive Technology Configurator (DT Configurator) helps you Online access to the Drive Technology Configurator 

to configure the optimum drive technology products for your 

application – starting with gear units, motors, converters as well 

More information about the Drive Technology Configurator is 

as the associated options and components and ending with 

available on the Internet at 

controllers, software licenses and connection systems. Whether 

www.siemens.com/dtconfigurator 

with little or detailed knowledge of products: preselected product 

groups, deliberate navigation through selection menus and 

direct product selection through entry of the article number 

support quick, efficient and convenient configuration. 

In addition, comprehensive documentation comprising technical 

data sheets, 2D dimensional drawings/3D CAD models, 

operating instructions, certificates, etc. can be selected in the 

DT Configurator. Immediate ordering is possible by simply transferring 

a parts list to the shopping cart of the Industry Mall. 

3 

Drive Technology Configurator for efficient drive 

configuration with the following functions 

• Quick and easy configuration of drive products and 

associated components – gear units, motors, converters, 

controllers, connection systems 

• Configuration of drive systems for pumps, fans and 

compressor applications from 1 kW to 2.6 MW 

• Retrievable documentation for configured products and 

components, such as 

- Data sheets in up to 9 languages in PDF or RTF format 

- 2D dimensional drawings/3D CAD models in various formats 

- Terminal box drawing and terminal connection diagram 

- Operating instructions 

- Certificates 

- Start-up calculation for SIMOTICS motors 

-EPLAN macros 

• Support with retrofitting in conjunction with Spares On Web 

(www.siemens.com/sow) 

• Ability to order products directly through the Siemens 

Industry Mall 

Access to the Drive Technology Configurator 

The Drive Technology Configurator can be called up without 

registration and without a login: 






SIMARIS planning tools for systems with SINAMICS drives 

■ Overview 

Electrical Planning: Simplified by Electrical Design 

Software! 

Electrical planning of power distribution systems in functional 

and industrial buildings has never been easy and is now more 

complex than ever. The electrical calculation software tools 

SIMARIS design for dimensioning and SIMARIS project for determination 

of the distribution boards’ space requirements support 

technical planners with the electrical planning process with 

SINAMICS drives. 

Supported SINAMICS drives: 

• SINAMICS G120, SINAMICS G120D, SINAMICS G120X 

• SINAMICS G110D, SINAMICS G110M 

• SINAMICS G130, SINAMICS G150 

SIMARIS planning tools for systems with SINAMICS drives > SIMARIS design 

■ Overview 

SIMARIS design is a planning tool for quick and effective network 

calculation and dimensioning of power distribution for nonresidential 

and industrial buildings. 

Starting in the planning phase, the entire electrical circuit required 

for the project can be structured and dimensioned on the 

basis of real products. For this purpose, the network structure is 

initially set up based on the stored modules for infeeds, couplings, 

distributors and branch circuits. It is also possible to reuse 

stored favorites, such as those processed for previous similar 

projects. Suitable components and distribution systems are 

then automatically selected from the product database stored in 

SIMARIS design based on the selected project-specific parameters 

and technical data. This precludes the extra costs so often 

incurred in the implementation phase as a result of systems that 

have not been correctly coordinated. 

Any configuration of electric power distribution is subject to frequent 

change and adaptation, not only in the planning phase, 

but also in the implementation phase. SIMARIS design makes it 

easy to incorporate such changes in the supply concept and to 

automatically check their reliability in terms of sound engineering 

practice and the currently applicable standards. 

SIMARIS design professional, a program version available for a 

fee, offers additional useful functions. It can be used to carry out 

and also document selectivity analyses, essential for safety 

power supply systems. There is also the option of analyzing and 

optimizing the energy efficiency of the planned network. 

The versatile output variants enable precise documentation of 

the project structure and of the calculated data suitable for every 

phase of a project. 

There is also the option of exporting the project data. This enables 

further processing of the planned project in SIMARIS project, 

and thus also supports and facilitates system planning. 

■ Benefits 

• Reduction in processing overhead for projects 

• Dimensioning of electrical networks on the basis of real products 

according to sound engineering practice and the currently 

applicable standards (VDE, IEC) 

• Automatic selection of the correct components from medium 

voltage through to interfacing of the load from the stored product 

database, i.e. no detailed knowledge of products and systems 

required 

• Open definition of the types of mains operation and switching 

states 

• Calculation of the short circuit current, load flow, voltage drop 

and energy balance 

• Incorporation of the required person, short circuit and overload 

protection 

• Option of factoring in any necessary functional endurance 

• Display and dimensioning of cable and busbar trunking systems 

for power conveyance and distribution 

• High planning reliability coupled with flexibility in the planning 

and implementation process 

• Tracking changes via change index possible 

• Simple adaptation in the case of application changes or expansions 

• Option for saving frequently required modules in the favorites 

library 

• Output of the created network diagram, as well as detailed 

parts lists and data lists 

• Incorporation of country-specific product portfolios 

• Comprehensive documentation of planning results with simple 

data transfer (Office, CAD etc.) 


SIMARIS design is a software tool for the network calculation 

and dimensioning of power distribution for non-residential and 

industrial buildings. Whether for a shopping center, a hospital or 

production facilities - with SIMARIS design you can reduce the 

overhead required for the overall planning of power distribution 

systems and hence the time spent on the selection and dimensioning 

of equipment. 


For further information and available downloads, please go to: 

www.siemens.com/simarisdesign 

If you have any other questions, please do not hesitate to contact 

our Customer Support Center: 

Phone: +49 70 00 7 46 27 47 

Email: technical-assistance@siemens.com 

3 


3/3



SIMARIS planning tools for systems with SINAMICS drives > SIMARIS project 

3 

■ Overview 

SIMARIS project is a planning tool for fast calculation of space 

requirements and electrical power distribution system budgets 

for non-residential and industrial buildings, and for generating 

specifications automatically. 

The following is determined in SIMARIS project based on the 

pre-defined project structure and the basic technical specifications 

selected: 

• For medium-voltage switchboards: selection of the required 

system and the required fields, then presentation of a front 

view with dimensions. 

• Following selection of the system for transformers, the required 

quantity must be selected. Selected transformers are 

presented as a parts list. 

• For low-voltage switchboards and distribution boards: selection 

of the required protection devices and switching devices 

per system. The most suitable distribution system is determined 

automatically based on the list of distribution devices 

thus created. It is then equipped with the devices and presented 

graphically in an automatically generated front view 

that includes dimensions. 

• Following selection of the system for busbar trunking systems 

the length is specified and the additionally required components 

are selected, e.g. infeeds, junction units and tap-off 

units. All the resulting components are listed in a parts list. 

Detailed information about Siemens devices or their article numbers 

is not needed because SIMARIS project makes the selection 

automatically on the basis of the parameters entered. 

For each item of switchboard or each distribution board, 

SIMARIS project takes the wiring, control and measurement etc. 

into account. 

A system plan drawn up in SIMARIS design can also be imported 

into SIMARIS project, which means that selecting devices 

becomes redundant and SIMARIS project builds up the 

project structure automatically. 

Convenient output versions are available to document the results, 

including the automatic generation of specifications for the 

planned systems. 

Typical versions of a system planned in SIMARIS project can be 

saved and repeatedly integrated in new projects from the favorites 

library. Automatically created systems can also be subsequently 

optimized or changed. This is particularly relevant if 

planning becomes more detailed and the budget needs to be reinforced 

as a result. 

For detailed calculation of costs - on an up-to-date and regional 

basis - and for more project support, please contact your 

Siemens representative. 

■ Benefits 

• Intuitive and easy to operate 

• Automatic selection and placement of matching distribution 

systems 

• Fast determination of the space requirements and cost of 

power distribution plants 

• End-to-end planning, from medium-voltage switchgear assemblies, 

transformers, low-voltage switchgear and busbar 

trunking systems right through to the distribution boards 

• Simple adaptation of project planning with increasing clarification 

of implementation requirements, but also in the event of 

application changes or expansions 

• Saving planned systems for similar projects individually in 

the favorites library and importing them from there into new 

projects 

• Option of factoring in functional endurance for busbar 

systems 

• Convenient output versions for documentation, such as 

graphic views, lists and specifications 

• Projects created in SIMARIS design can also be imported 


SIMARIS project is suitable for the fast determination of the 

space requirements and cost of electrical power distribution in 

all industrial and non-residential buildings and for the automatic 

generation of specifications. From shopping centers to hospitals 

and production buildings – with SIMARIS project it is possible to 

reduce the amount of work required for the overall planning of 

power distribution systems and hence the time spent on selecting 

and dimensioning the necessary equipment. 


For further information and available downloads, please go to: 

www.siemens.com/simarisproject 

If you have any other questions, please do not hesitate to contact 

our Customer Support Center: 

Phone: +49 70 00 7 46 27 47 

Email: technical-assistance@siemens.com 




■ Overview 

The SinaSave energy efficiency tool calculates potential energy 

savings and amortization times based on your individual conditions 

of use and therefore offers practical assistance in making 

decisions about investments in energy-efficient technologies. 

From SinaSave Version 6.0 and higher, the drive systems to be 

compared and the relevant drive component parameters are 

displayed graphically. An additional expansion are the numerous 

comparison possibilities for different control types and comprehensive 

product combinations for drive solutions for pump 

and fan applications. In addition to SIMOTICS motors and 

SINAMICS drives, the product portfolio comprises SIRIUS 

switching devices, offering a comprehensive range of comparison 

possibilities – according to your individual requirements. 

SinaSave energy efficiency tool 

SinaSave supports the evaluation of the various comparisons of 

product and system by 

• Displaying the potential savings for energy and energy costs, 

as well as CO 2 emissions 

• Estimation of the amortization time 

• Estimation of the individual total lifecycle costs 

• Representation of the system power losses according to 

EN 50598-2 for full load and partial load 

• Direct comparison of Siemens drives with the reference Power 

Drive System (PDS) described in EN 50598-2 

3 

SinaSave offers numerous comparison scenarios: 

• Comparison of drive systems for pump and fan applications in 

the output range from 0.55 kW (low voltage) to 5.5 MW 

(medium voltage) for 

- Reactor control (fixed speed; motor and switching device) 

- Bypass control (fixed speed; motor and switching device) 

- Speed control (variable speed; motor and frequency 

converter) 

• Comparison and evaluation of standard motors (incl. ignition 

protection motors) in different energy efficiency classes 

Access to the SinaSave energy efficiency tool 

SinaSave can be accessed without the need for registration or 

logging in: 

www.automation.siemens.com/sinasave 


For more information about the amortization calculator for 

energy-efficient drive systems, visit 

www.siemens.com/sinasave 

More information about services for energy saving is available 


www.siemens.com/energysaving 


3/5



3 

SIZER for Siemens Drives engineering tool 

■ Overview 

The following drives and controls can be engineered in a userfriendly 

way using the SIZER for Siemens Drives engineering 

tool: 

• SIMOTICS low-voltage motors, including servo geared motors 

• SIMOGEAR geared motors 

• SINAMICS low-voltage drive systems 

• Motor starters 

• SINUMERIK CNC 

• SIMOTION Motion Control controller 

• SIMATIC controller 

It provides support when selecting the technologies involved in 

the hardware and firmware components required for a drive 

task. SIZER for Siemens Drives covers the full range of operations 

required to configure a complete drive system, from basic 

single drives to demanding multi-axis applications. 

SIZER for Siemens Drives supports all of the engineering steps 

in one workflow: 

• Configuring the power supply 

• Designing the motor and gearbox, including calculation of 

mechanical transmission elements 

• Configuring the drive components 

• Compiling the required accessories 

• Selecting the line-side and motor-side power options, e.g. 

cables, filters, and reactors 

When SIZER for Siemens Drives was being designed, particular 

importance was placed on a high degree of usability and a 

universal, function-based approach to the drive application. The 

extensive user guidance makes it easy to use the tool. Status 

information keeps you continually informed about the progress 

of the configuration process. 

The drive configuration is saved in a project. In the project, the 

components and functions used are displayed in a hierarchical 

tree structure. 

The project view permits the configuration of drive systems and 

the copying/inserting/modifying of drives already configured. 

The configuration process produces the following results: 

• A parts list of the required components (export to Excel, use 

of the Excel data sheet for import to SAP) 

• Technical specifications of the system 

• Characteristic curves 

• Comments on system reactions 

• Mounting arrangement of drive and control components and 

dimensional drawings of motors 

• Energy requirements of the configured application 

These results are displayed in a results tree and can be reused 

for documentation purposes. 

Support is provided by the technological online help menu: 

• Detailed technical specifications 

• Information about the drive systems and their components 

• Decision-making criteria for the selection of components 

• Online help in English, French, German, Italian, Chinese and 

Japanese 

System requirements 

• PG or PC, PentiumTM III min. 800 MHz 

(recommended > 1 GHz) 

• 512 MB RAM (1 GB recommended) 

• At least 2 GB of free hard disk space 

• An additional 100 MB of free hard disk space on Windows 

system drive 

• Screen resolution 1024 × 768 pixels 

• Operating system: 

- Windows 7 (32/64-bit) Professional, Enterprise, Ultimate, 

Home 

- Windows 8.1 (32/64-bit) Professional, Enterprise, Ultimate, 

Home 

- Microsoft Office 2003/2007/2010/2013/2016 

- Windows 365 

- Microsoft Internet Explorer V8.0 

- Microsoft .NET Framework 2.0 

-OpenGL2.1 

- Windows 10 (64-bit) Professional, Enterprise 

• Microsoft Internet Explorer from V5.5 SP2 


The SIZER for Siemens Drives engineering tool is available free 


www.siemens.com/sizer 




SINAMICS web server for SINAMICS G120X via SINAMICS G120 Smart Access 

■ Overview 

Web server for efficient commissioning, diagnostics and 

maintenance 


with IOP-2 

SINAMICS G120 

Smart Access 

SINAMICS G120X with IOP-2 and SINAMICS G120 Smart Access 

Thanks to the optionally available SINAMICS G120 Smart 

Access, the SINAMICS G210X drive system offers a web server 

for efficient commissioning, diagnostics and maintenance options. 

The web server provides access to a multi-faceted range 

of new options for parameter assignment and drive diagnostics 

for laptops, tablets and smartphones, including: 

• Simple and fast commissioning 

• Drive traversing via the control panel 

• Downloading/uploading a configuration 

• Providing a status overview of the drive 

• Evaluating warnings and fault messages 

• Monitoring and adapting parameter settings 

G_D011_EN_00568 

■ Benefits 

Simple and fast commissioning 

• No installation of additional commissioning software 

• Standard pages for limit values and settings 

• Comprehensive fault diagnosis 

Direct language selection 

• English, German, French, Italian, Spanish, Chinese 

Accessibility 

• Free choice of terminal devices as the web server works with 

all common web browsers, such as iOS, Android, Windows, 

Linux and Mac OS 

Diagnostic functions 

• Quick overview of the current configuration and the state of 

the drive 

• Understandable diagnostic information and messages, including 

the causes of issues and possible remedies, are displayed 

in plain text in multiple languages 

Freely configurable parameter lists 

• Monitoring parameters for diagnostic purposes, for example 

for operating personnel 

• Adjustment of the parameter lists using filters, parameter 

groups and the configuration of personal lists 

Access security 

• Protection against unauthorized access to the drive 

information 


The web server is ideal for applications in which special commissioning 

software or version dependencies are not desired. 

Easy commissioning, diagnostics and maintenance are possible 

locally, provided appropriate security measures are applied. 

3 


3/7



Notes 

3 




4 

4/2 Partner 

4/3 Industry Services 

4/4 Industry Services – Portfolio overview 

4/5 Online Support 

4/6 Training 

4/6 SITRAIN – Digital Industry Academy 

4/7 Training courses for 

SINAMICS low-voltage converters 

4/8 SINAMICS G120X training case 

4/9 Control cabinets 

4/11 Applications 

4/12 Spare parts services 

4/12 Spare parts services during the lifecycle 

4/12 Delivery of spare parts 

4/13 Delivery as exchange product 

4/13 Repair 

4/14 Product upgrade service 

4/14 General overhaul 

4/15 Function check 

4/15 Return of diagnostic parts 

4/16 Stock reduction in spare parts store 

4/16 Extended spare part availability 

4/17 Spares on Web 

4/18 Product Partner – Drives Options 

4/19 mySupport documentation 

4/20 Documentation 

4/20 General documentation 

4/21 SINAMICS G120X documentation 




Partner 

Partner at Siemens 

4 

At your service locally, around the globe for consulting, sales, 

training, service, support, spare parts on the entire portfolio of 

Digital Industries. 

Your partner can be found in our Personal Contacts Database at: 


You start by selecting 

• the required competence, 

• products and branches, 

• a country and a city 

or by a 

location search or free text search. 




Industry Services 

■ Overview 

Support and 

Consulting 

Services 

Training 

Services 

Digital Industry 

Services 

Service 

Programs and 

Agreements 

Spare Parts 

Services 

Repair 

Services 

Field and 

Maintenance 

Services 

Retrofit and 

Modernization 

Services 

4 

G_DA65_XX_00272b 

Keep your business running and shaping your digital future – with Industry Services 

Optimizing the productivity of your equipment and operations 

can be a challenge, especially with constantly changing market 

conditions. Working with our service experts makes it easier. 

We understand your industry's unique processes and provide 

the services needed so that you can better achieve your business 

goals. 

You can count on us to maximize your uptime and minimize your 

downtime, increasing your operations' productivity and reliability. 

When your operations have to be changed quickly to meet a 

new demand or business opportunity, our services give you the 

flexibility to adapt. Of course, we take care that your production 

is protected against cyber threats. We assist in keeping your 

operations as energy and resource efficient as possible and reducing 

your total cost of ownership. As a trendsetter, we ensure 

that you can capitalize on the opportunities of digitalization and 

by applying data analytics to enhance decision making: You can 

be sure that your plant reaches its full potential and retains this 

over the longer lifespan. 

You can rely on our highly dedicated team of engineers, technicians 

and specialists to deliver the services you need – safely, 

professionally and in compliance with all regulations. We are 

there for you, where you need us, when you need us. 

www.siemens.com/industryservices 


4/3




Industry Services – Portfolio overview 

■ Overview 

Digital Industry 

Services 

Digital Industry Services 

Digital Industry Services make your industrial 

processes transparent to gain improvements in 

productivity, asset availability, and energy 

efficiency. 

Production data is generated, filtered and 

translated with intelligent analytics to enhance decision-making. 

This is done whilst taking data security into consideration and 

with continuous protection against cyber-attack threats. 

www.siemens.com/global/en/products/services/industry/ 

digital-industry-services.html 

Repair 

Services 

Repair Services 

Repair Services are offered on-site and in regional 

repair centers for fast restoration of faulty 

devices’ functionality. 

Also available are extended repair services, 

which include additional diagnostic and repair 

measures, as well as emergency services. 


Training 

Services 

Training Services 

From the basics and advanced to specialist 

skills, SITRAIN courses provide expertise right 

from the manufacturer – and encompass the 

entire spectrum of Siemens products and 

systems for the industry. 

Worldwide, SITRAIN courses are available wherever you need a 

training course in more than 170 locations in over 60 countries. 


Field and 

Maintenance 

Services 

Field and Maintenance Services 

Siemens specialists are available globally to 

provide expert field and maintenance services, 

including commissioning, functional testing, 

preventive maintenance and fault clearance. 

All services can be included in customized service 

agreements with defined reaction times or fixed maintenance 

intervals. 


4 

Support and 

Consulting 

Services 

Support and Consulting Services 

Industry Online Support site for comprehensive 

information, application examples, FAQs 

and support requests. 

Technical and Engineering Support for advice 

and answers for all inquiries about functionality, 

handling, and fault clearance. The Service Card as 

prepaid support for value added services such as Priority Call 

Back or Extended Support offers the clear advantage of quick 

and easy purchasing. 

Information & Consulting Services, e.g. SIMATIC System 

Audit; clarity about the state and service capability of your automation 

system or Lifecycle Information Services; transparency 

on the lifecycle of the products in your plants. 


Retrofit and 

Modernization 

Services 

Retrofit and Modernization Services 

Provide a cost-effective solution for the expansion 

of entire plants, optimization of systems or 

upgrading existing products to the latest technology 

and software, e.g. migration services for 

automation systems. 

Service experts support projects from planning through commissioning 

and, if desired over the entire extended lifespan, e.g. 

Retrofit for Integrated Drive Systems for an extended lifetime of 

your machines and plants. 


Spare Parts 

Services 

Spare Parts 

Spare Parts Services are available worldwide 

for smooth and fast supply of spare parts – and 

thus optimal plant availability. Genuine spare 

parts are available for up to ten years. Logistic 

experts take care of procurement, transport, 

custom clearance, storage and order management. 

Reliable logistics processes ensure that components 

reach their destination as needed. 

Since not all spare parts can be kept in stock at all times, 

Siemens offers a preventive measure for spare parts provisioning 

on the customer's premises with optimized Spare Parts 

Packages for individual products, custom-assembled drive 

components and entire integrated drive trains – including risk 

consulting. 

Asset Optimization Services help you design a strategy for 

parts supply where your investment and carrying costs are 

reduced and the risk of obsolescence is avoided. 


Service 

Programs and 

Agreements 

Service Programs and Agreements 

A technical Service Program or Agreement 

enables you to easily bundle a wide range of 

services into a single annual or multi-year 

agreement. 

You pick the services you need to match your 

unique requirements or fill gaps in your organization’s maintenance 

capabilities. 

Programs and agreements can be customized as KPI-based 

and/or performance-based contracts. 






Online Support 

■ Overview 

Online Support – fast, intuitive, whenever you want, 

wherever you need 

Web 

support.industry.siemens.com 

App 

Scan the QR code 

for information on 

our Online Support 

app. 

FAQ / Application examples 

Information about industrial products, programming and configuration as well as application 

examples 

4 

Technical information 

Videos, documentation, manuals, updates, product notes, compatibility tool, certificates, planning data 

such as dimensional drawings, product data, 3D models 

Forum 

Exchange information and experience with other users and experts 

Online Support for Siemens Industry Products 

Siemens Industry and Online Support with some 1.7 million visitors 

per month is one of the most popular web services provided 

by Siemens. It is the central access point for comprehensive 

technical know-how about products, systems and services for 

automation and drives applications as well as for process 

industries. 

In connection with the challenges and opportunities related to 

digitalization you can look forward to continued support with 

innovative offerings. 


4/5



Training 

SITRAIN – Digital Industry Academy 

4 

Time for learning 

Today’s demands on our knowledge are every bit as diverse and dynamic as our profession itself. We keep learning more and longer 

– for our work, for our career and for ourselves. Advancing digitalization entails new topics and is also changing the way we absorb 

and process knowledge. SITRAIN – Digital Industry Academy offers the right source of knowledge here, which we can use anytime 

in just the way we need it. The time for learning is now. 

Knowledge for every need 

 

 

With its three areas – SITRAIN open, SITRAIN access and 

SITRAIN personal – SITRAIN offers you an all-encompassing 

range of options for an ongoing expansion of your knowledge 

and skills, suited for every type of learner. And SITRAIN uses 

advancing digitalization to continuously expand content and 

offer new training methods. 

Knowledge you can always find 

SITRAIN open bundles useful information, worthwhile data and 

up-to-date expert knowledge about Siemens products for 

industry. Search it anytime, find anything – and always the right 

stuff. 

Knowledge that gets you ahead 

SITRAIN access is learning in the digital age. It offers you 

individualized ways to build your knowledge and access to 

exclusive digital training courses. Take advantage of sustainable 

learning success with a wide range of learning methods. 

Improve your skills – whether working in groups with others, or 

by yourself. Whenever, wherever and however you need to. 

Knowledge you can experience 

We all want to learn from the best. And SITRAIN personal’s 

training courses let you benefit from our well-practiced trainers’ 

expert knowledge, along with direct access to our training 

equipment. That’s the best way to convey knowledge – whether 

at your company or in our training classrooms. 

Find 

your local 

offer here 


Customer Support Germany 

Tel.: +49 911 895-7575 

E-Mail: sitrain.digital.industry.academy.de@siemens.com 


www.siemens.com/sitrain 

• SITRAIN open: 

www.siemens.com/sitrain-open 

• SITRAIN access: 

www.siemens.com/sitrain-access 

• SITRAIN personal: 

www.siemens.com/sitrain-personal 




Training 

Training courses for SINAMICS low-voltage converters 

■ Overview 

Training courses for SINAMICS drive system 

This provides an overview of the training courses available for 

the SINAMICS drive system. 

The courses are modular in design and are directed at a variety 

of target groups as well as individual customer requirements. 

The system overview will acquaint decision-makers and sales 

personnel with the system very quickly. 

The engineering course provides all the information you need to 

configure the drive system. 

The courses dedicated to diagnostics and servicing, parameterization 

and commissioning, communication as well as extended 

functions such as Safety Integrated are sure to provide all the 

technical knowledge service engineers will need. 

All courses contain as many practical exercises as possible to 

enable intensive and direct training on the drive system and with 

the tools in small groups. 

Please also take note of the training options available for 

SIMOTICS motors. You will find more information about 

course contents and dates in Catalog ITC and on the Internet. 

Title Target group Duration Order code 

(all courses are available in English and German) 

Planners, 

decision-makers, 

sales personnel 

Commissioning 

engineers, 

configuring 

Service personnel, 

maintenance 

technicians 

engineers 

Courses Fundamentals and overview 

SINAMICS and SIMOTICS – Basics of drive technology 5days DR-GAT 

SINAMICS and SIMOTICS – System overview – – 3 days DR-SYS 

SINAMICS System Overview – – 2 days DR-SN-UEB 

Courses SINAMICS S120 

Planning and engineering – – 5 days DR-S12-PL 

Parameterizing and commissioning – – 5 days DR-S12-PM 

Parameterization and commissioning in the TIA – – 5 days DR-S12-PMT 

Parameterization Advanced Course – – 5 days DR-S12-PA 

Parameterizing and optimizing – – 5 days DR-S12-OPT 

Parameterizing Safety Integrated – – 4 days DR-S12-SAF 

Diagnostics and service – – 5 days DR-S12-DG 

Diagnostics at chassis and cabinet units – 3 days DR-S12-CHA 

Courses SINAMICS G120 

Planning and engineering – – 2 days DR-G12-PL 

Parameterizing and commissioning – – 2 days DR-G12-PM 

Parameterization Advanced Course – – 3 days DR-G12-PA 

Parameterizing Safety Integrated – – 2 days DR-G12-SAF 

Courses SINAMICS G120X 

Parameterizing and commissioning – 1 day DR-G12X-PM 

Courses SINAMICS G130/G150/G180/S150 

DYNAVERT – commissioning and diagnostics – 2 days DR-DYNA 

SINAMICS G150/G130/S150 – diagnostics and service – 5 days DR-G15-DG 

SINAMICS G180 – diagnostics and service – – 2.5 days DR-G18-DG 

4 


4/7



Training 


■ Overview 


Supply voltage 

Dimensions 

•Width 

•Height 

•Depth 

Weight, approx. 


training case 

6AG1067-2AA00-0AC1 

230 V 1 AC 

290 mm (11.42 in) 

470 mm (18.50 in) 

300 mm (11.81 in) 

16.9 kg (37.26 lb) 


Description 


Article No. 

6AG1067-2AA00-0AC1 

4 


The SINAMICS G120X training case is a convincing demonstration 

system thanks to its compact design. It is suitable for direct 

customer presentations as well as for tests in technical 

departments. It enables the functions of SINAMICS G120X to be 

demonstrated and tested quickly and easily. 

It contains the following components: 

• SINAMICS G120X frequency converter, PROFINET, 

EtherNet/IP, 0.75 kW 

• Operator panels IOP-2 

• SINAMICS G120 Smart Access 

• SIMOTICS GP asynchronous (induction) motor 

The SINAMICS G120X training case is supplied as a trolley with 

a hood. 




Control cabinets 

■ Overview 

Complete equipment for machine tools and 

production systems 

Our supplied range of products and services also includes 

complete equipment for machine tools and production systems 

with all services in the process chain from consulting through to 

after-sales service. 

We support you in the areas of engineering, production and 

logistics. 

Engineering support 

Siemens supports you with advice on design in accordance with 

standards and concepts for drive systems, control, operation 

and safety. 

Our engineers configure for you in EPLAN P8 and other commonly 

used CAD systems, execute projects designed to cost 

and adapt your documents where necessary to UL or new 

systems. 

Our Technical Competence Center Cabinets in Chemnitz 

supports you with selecting and optimizing the suitable control 

cabinet air-conditioning system. Apart from calculation and 

simulation, we also use instrumentation testing in our heat 

laboratory with load simulation. 

We also offer the following services: 

• Vibration measurements and control cabinet certification in 

the field 

• Measurement of conducted interference voltages in our 

laboratory 

Cabinet engineering 

Testing in the heat laboratory 

Production at a high level of quality 

Complete equipment is manufactured at a high industrial level. 

This means: 

• Examining consistency of the order documentation 

• Checking for adherence to current regulations 

• Collision check in 3D layout, taking into account the free 

space required thermally and electrically 

• Automatic preparation of enclosures, cables and cable 

bundles 

• Automated inspection and shipment free of faults 

• Documentation and traceability 

• Declaration of conformity regarding the Low-Voltage Directive 

and manufacturer's declaration on machinery directive 

• UL label on request 

Superior logistics 

Everything from a single source offers you the following 

advantages: 

• Cost savings for procurement, stockkeeping, financing 

• Reduction in throughput times 

• Just-in-time delivery 

Individual support and maximum flexibility 

Our technical consultants for complete equipment support 

customers and sales departments in the various regions. 

Our control cabinet customers are supported in the Systems 

Engineering Plant Chemnitz (WKC) by ordering centers and 

production teams that are permanently assigned to customers. 

Distance does not present a problem; we also use web cams 

for consulting our customers. 

4 


4/9



Control cabinets 

■ Overview 

4 

Worldwide repair service 

Customer-specific logistics models, flexible production capacity 

and production areas as well as change management in all 

process phases ensure maximum flexibility. 

Customized supplementary products 

As part of its complete equipment program, Siemens also offers 

the development and construction of customized supplementary 

products, e.g. special operator panels and power supply 

systems. 

Liability for defects 

Of course we accept the same liability for defects for our 

complete equipment as for our SINUMERIK and SINAMICS 

products. 

Furthermore, you can use our worldwide repair service anywhere 

and at any time. 

Your benefits 

One partner, one quotation, one order, one delivery, one invoice, 

and one contact partner for liability of defects. 

For series production or individual items, Siemens is your 

competent partner for complete equipment. 

Control cabinet with SINAMICS S120 in booksize format 




Applications 

■ Overview 

Our understanding of an application is the customer-specific 

solution of an automation task based on standard hardware and 

software components. In this respect, industry knowledge and 

technological expertise are just as important as expert knowledge 

about how our products and systems work. We are setting 

ourselves this challenge with more than 280 application 

engineers in 20 countries. 

Application centers 

We currently have application centers in: 

• Germany: 

Head Office in Erlangen and in other German regions, e.g. 

in Munich, Nuremberg, Stuttgart, Mannheim, Frankfurt, 

Chemnitz, Cologne, Bielefeld, Bremen, Hanover, Hamburg 

• Belgium: Brussels 

• Brazil: Sao Paulo 

• China: Beijing and 12 regions 

• Denmark: Ballerup 

• France: Paris 

• Great Britain: Manchester 

• India: Mumbai 

• Italy: Bologna, Milan 

• Japan: Tokyo, Osaka 

• The Netherlands: The Hague 

• Austria: Vienna 

• Poland: Warsaw 

• Sweden: Göteborg 

• Switzerland: Zurich, Lausanne 

• Spain: Madrid 

• South Korea: Seoul 

• Taiwan: Taipei 

• Turkey: Istanbul 

• USA: Atlanta 

These application centers specialize in the use of SIMATIC/ 

SIMOTION/SINAMICS. You therefore can rely on automation 

and drive specialists for implementing successful applications. 

By involving your personnel at an early stage in the process, 

we can provide a solid basis for rapid knowledge transfer, maintenance 

and further development of your automation solution. 

Advice on applications and implementation 

We offer a variety of consultation services to help you find the 

optimum solution for the SIMATIC/SIMOTION/SINAMICS 

application you want to implement: 

The quotation phase includes 

• clarification of technical questions, 

• discussion of machine concepts and customer-specific 

solutions, 

• selection of suitable technology and 

• suggestions for implementation. 

A technical feasibility study is also performed at the outset. 

In this way, difficult points of the application can be identified 

and solved early on. We can also configure and implement your 

application as a complete solution from a single source. 

A large number of proven standard applications are available for 

use during the implementation phase. This saves engineering 

costs. 

The system can be commissioned by experienced, competent 

personnel, if required. This saves time and trouble. 

If servicing is required, we can support you on site or remotely. 

For further information about servicing, please see the section 

"Industry Services". 

On-site application training 

Training for the implemented applications can also be organized 

and carried out on site. This training for machine manufacturers 

and their customers does not deal with individual products, 

but the entire hardware and software system (for example, 

automation, drives and visualization). 

From an initial concept to successful installation and commissioning: 

We provide complete support for SIMATIC/ 

SIMOTION/SINAMICS! Contact your Siemens representative. 

You can find further information at 

www.siemens.com/machinebuilding 

4 


4/11



Spare parts services 

Spare parts services during the lifecycle 

4 

You can sign up for the spare parts service that suits your 

■ Overview 

requirements perfectly: 

• Delivery of spare parts 

Operation and Maintenance 

Spare Part Delivery 

Exchange Delivery 

Repair 

Product Upgrade Service 

General Overhaul 

Functionality Check 

Extended spare parts availability 

Modernization • Delivery as exchange product 

• Repair 

• Product upgrade service 

• General overhaul 

• Function check 

• Return of diagnostic parts 

• Stock reduction of your spare parts store 

• Extended spare parts availability 

■ Benefits 

7 Optimum price/performance ratio and top quality 

Product upgrade service, general overhaul and extended spare 

parts availability additionally prolong your machine runtimes 

7 Lifecycle management over the complete lifecycle 

7 Outstanding quality and availability of your machines and 

plant using Siemens original spare parts 

Spare parts services during the lifecycle 

Siemens also provides constant support to customers after 

delivery of the machines or plant. This includes spare parts, 

repairs, as well as other supplementary services, and has a 

positive effect on machine operating times, inventories and 

costs. 

When customers purchase a high-quality machine or plant, they 

intend to use it as intensively as possible, preferably for three 

7 Global network and optimized logistics chains – 

24 hours a day, 365 days a year 

7 Additional services from Siemens 


More information is available on the Internet at: 

www.siemens.com/motioncontrol/spareparts 

shifts a day over many years. Under such circumstances, it is 

normal for parts to fail eventually. It is essential to replace the 

For further information, please approach your contact at your 

part as quickly as possible, because every hour of a plant stoppage 

local Siemens office. 

costs money. To satisfy the multi-faceted requirements Contact information is available on the Internet at: 

in the different areas, we have created comprehensive spare 

parts services. 


Delivery of spare parts 

G_NC01_EN_00460a 

■ Overview 

■ Benefits 

In every industry worldwide, plants and systems are required to 7 New liability for defects for the spare part 

operate with constantly increasing reliability. Lack of a specific 7 Long-term spare parts availability 

spare part can result in considerable costs. We will provide you 

7 Optimum system compatibility 

with the support you need to prevent a standstill from occurring 

in the first place: with a worldwide network and optimum logistics 

chains. 

Ordering 

mode 

Logistics service 

Note 

Standard 

Cost-optimized: 

Contracted shipping 

company 

Delivery within the normal national 

delivery times through the contracted 

shipping company 

Plant 

stoppage 

Emergency 

service 

Time-optimized: 

Express, courier, 

collection 

Special logistics: 

Courier 

You choose the shortest possible 

delivery time for your own benefit: 

• Delivery by means of collection or 

courier service 

• Delivery by express service 

You can also order the spare parts 

from us outside normal working hours, 

as well as on weekends or national 

holidays round-the-clock. 

• Your delivery will arrive by courier 



Return 

■ Overview 

In addition to the simple delivery of spare parts, with many 

products, we also offer you the option of an exchange. This has 

the advantage that you not only receive the spare part quickly, 

but are able to return the defective device to us for a credit. You 

therefore receive our spare part at the lower exchange price. 

A credit will be awarded on condition that the repair code indicates 

that repurchasing is admissible, a replacement is obtained 

from the spare parts store, and that the returned product is 

repairable. 

The ordering mode and logistics service determine the delivery 

of spare parts: 

■ Benefits 

Ordering Logistics service Note 

mode 

Standard 

Plant 

stoppage 

Cost-optimized: 

Contracted shipping 

company 

Time-optimized: 

Express, courier, 

collection 

Delivery within the normal national 

delivery times through the contracted 

shipping company 

You choose the shortest possible 

delivery time for your own benefit: 

• Delivery by means of collection or 

courier service 

• Delivery by express service 



Delivery as exchange product 

For returns, we require the following information: 

• Reason for return 

• If defective: detailed description of the fault 

• Machine number 

• Machine/system manufacturer 

• End customer 

We will then be able to provide you with additional information 

in the repair report/inspection report regarding the diagnosis/ 

inspection as well as information about the completed repair. 

7 Savings thanks to the option of returning defective parts 

7 A spare part is available immediately in the event of failure 

7 New liability for defects for the spare part 

7 Long-term spare parts availability 

7 Optimum system compatibility 

Emergency 

service 

Special logistics: 

Courier 

You can also order the spare parts 

from us outside normal working hours, 

as well as on weekends or national 

holidays round-the-clock. 

• Your delivery will arrive by courier 

■ Overview 

Downtimes cause problems in the plant as well as unnecessary 

costs. We can help you to reduce both to a minimum – with 

our worldwide repair facilities. The advantage for you: Defects 

can be rectified before they cause further harm. 

Repair is a favorable option when you have specific reasons 

for not replacing the defective device or part with a new one 

(delivery as exchange product). 

We maintain a global network of Siemens repair shops and 

certified partners to ensure that we will always be able to 

process your repairs quickly. 

We can offer you different types of repair depending on your 

requirements: 

Repair 

Function repair 

A function repair is the same as a normal repair but excludes the 

repair of cosmetic defects, e.g. scratches, labels, discoloration. 

The conditions applicable to function repairs should be observed 

in this case. The function repair service is only available 

for machine manufacturers or machine operators. Please ask 

your regional Siemens contact. 

For repairs, we require the following information: 

• Reason for return 

• If defective: detailed fault report 

• Machine number 

• Machine/system manufacturer 

• End customer 

4 

Normal repair 

■ Benefits 

Normal repair at standard conditions normally takes 10 working 

days following receipt of the defective item at our repair shop. 

Fast repair 

In particularly urgent cases, we offer you the option of a fast 

repair within 1 or 2 working days for many products at additional 

cost. 

Turnaround repair 

With a turnaround repair, we organize on your behalf collection 

of the device/component to be repaired. 

Mobile repair service 

We come to you and perform the required repairs on site, for 

example, when the device/component cannot be removed due 

to its weight. 

7 Short downtimes for machines and plants 

7 Only certified original parts are used 

7 Additional services from Siemens: 

• Longer availability of your machine/plant through the 

preventive replacement of wear parts and aging parts 

• Highest standards of quality 

• Use of the comprehensive test concept of series production, 

including software, firmware, ASICs, complex function 

blocks, etc. 

• Implementation of all the hardware and software/firmware 

enhancements known by development, production, service 

and quality management departments, as well as suppliers 

7 Information supplied by repair report/inspection report 


4/13




Product upgrade service 

■ Overview 

A planned product upgrade from OLD to NEW helps to prevent 

unplanned machine stoppages and supports a safer and longer 

machine/plant availability. The upgrade service is mainly offered 

for older components that will soon be discontinued. 

For information about potential upgrades from the latest upgrade 

list, please ask your regional Siemens contact. The product upgrade 

service is only available for machine manufacturers or 

machine operators. 

Product upgrade service: From OLD to NEW 

A long service life is expected from machines and plants. The 

service life of the electronic components is, however, limited and 

normally shorter than the planned machine/plant operating 

times. To ensure that the required extended availability of the 

machine/plant is achieved, we offer you the product upgrade 

service at an attractive price. 

In the course of their lifecycle, electronic components are 

normally redesigned/upgraded several times. With the product 

upgrade service, you will always receive the latest technology. 

■ Benefits 

7 Price benefit through upgrade service 

7 New liability for defects for the new component 

7 Extended availability of your machine/plant 

7 Prevention of component failures due to wear and aging 

7 Prevention of machine stoppages due to unavailability of 

spare parts 

7 Reduced spare parts inventories 

7 Latest technology 

7 Easier servicing due to fewer variants 

7 Industry Services through Siemens are assured for the future 

General overhaul 

4 

■ Overview 

Extension of the constant failure rate period 

During the planned general overhaul, wear parts and aging 

parts are replaced in accordance with their stated service life so 

as to reduce unplanned downtimes. In the case of motors, in 

addition to a general overhaul, replacement of bearings and 

encoders is also offered. 

Failure rate 

Early 

failures 

Operating time of the plant 

Extension of constant 

failure rate period 

Ware out 

failures 

Warranty General overhaul 

Constant failure rate period 

Constant failure rate period with general overhaul 

Extension of the period with a constant failure rate 

A long service life is expected from machines and plants. The 

service life of electronic components and mechanical parts is, 

however, limited and normally shorter than the planned machine/ 

plant operating times. For higher availability of the machines or 

plants, we offer a general overhaul (preventive maintenance) for 

electronic components and motors at favorable conditions. 

G_NC01_EN_00459a 

If a fault is detected during a general overhaul, troubleshooting 

and repair will be performed at the repair price without requesting 

confirmation or interrupting the process. In the case of extensive 

wear or damage, a general overhaul/repair will not be performed. 

A fixed lump sum for expenses will be charged in this 

case. 

■ Benefits 

7 Preventive replacement of wear parts and aging parts in 

accordance with their stated service life 

7 Reduction in unplanned plant stoppages 

7 Enhanced production reliability 

7 Extended availability of your machine/plant 

7 New liability for defects for 12 months for the components 

subjected to a general overhaul 

7 Low price 





Function check 

■ Overview 

■ Benefits 

It is checked that the components function reliably. 

7 The component is checked and can be deployed again 

7 

The first step involves cleaning the component. Then all the 

The component contains all the known improvements 

hardware and software/firmware enhancements are implemented 

that are known by development, production, service and 7 Low price 

7 The customer's own spare parts stock is up-to-date 

quality management departments, as well as suppliers. Using 

the comprehensive test concept of series production, all the 

functions of the software, firmware, ASICs, complex and less 

complex function blocks are checked. 

If a fault is detected during the function check, troubleshooting 

and repair will be performed at the repair price without requesting 

confirmation or interrupting the process. In the case of extensive 

wear or damage, no repairs will be performed. A fixed lump 

sum for expenses will be charged. 

Return of diagnostic parts 

■ Overview 

■ Benefits 

7 Can be used for diagnostics 

7 Reduced spare parts inventories 

7 Low costs 

4 

Spare parts used for diagnostic purposes from the spare parts 

store can be returned within 3 months and a credit note for up to 

85 % is issued. 

For unused spare parts in their original packaging, you will receive 

a credit of 100 % in which case you will be charged a fixed 

price for handling. 


4/15




Stock reduction in spare parts store 

■ Overview 

■ Benefits 

7 Reduced costs 

7 Stock optimization 

7 Minimization of fault downtimes 

Thanks to fast delivery of spare parts from Siemens, manufacturers 

and plant operators are able to reduce their spare parts 

inventories. Siemens offers an analysis for this purpose to indicate 

exactly which parts must be available in the customer's 

stores for a specific combination of machines and which should 

be obtained directly from Siemens. 

4 

Extended spare part availability 

■ Overview 

■ Benefits 

We normally retain spare parts for all products and systems for 7 Higher plant availability 

a period of 10 years after discontinuation of product marketing. 7 Investment protection 

In individual cases, when we do not carry spare parts, we will 7 Reduction of lifecycle costs 

offer a repair. 

For a wide range of products and systems, we extend the availability 

of spare parts. We can provide you with the current spare 

parts availability for your machine/plant as a service once you 

have registered online with identSNAPSHOT. 

www.siemens.com/identsnapshot 

If you require longer availability of spare parts, please contact 

your regional sales representative. 




Spares on Web 

■ Overview 

Spares on Web – online identification of spare parts 

Spares on Web is a web-based tool for identifying spare parts. 

After you have entered the Article No. and serial number, the 

spare parts available for the relevant unit are displayed. 

www.siemens.com/sow 

4 


4/17



Product Partner – Drives Options 

■ Overview 

Siemens Product Partners for Drives Options 

Individual options for our drives 

In order to meet as many customer requirements as possible 

in the field of drive technology, in addition to its own products, 

Siemens also relies on the individual and complementary 

services of selected partners. 

We are increasingly focusing on the standard drive options, and 

our Siemens Product Partners for Drives Options supplement 

our drives with individual drive options. 

This gives Siemens a unique flexibility to meet all application 

requirements. Naturally, we support our Siemens Product 

Partners for Drives Options in tailoring their options perfectly 

to our drives. 

For you as our customer, there are multiple benefits: 

• The Siemens Product Partners for Drives Options meet the 

same high standards of quality and performance that we 

place on our own products 

• Drive options can be adapted to individual requirements/ 

designs 

• The Siemens Product Partners for Drives Options know our 

Siemens converter portfolio and can advise you individually 

and quickly 

Converter 

Motor 

Line filters 

1) 

Line reactors/ 

line reactors as base 

components1) 

Sine-wave filters 

dv/dt filters 

Output reactors 

1) 

4 

G_D011_EN_00529a 

Braking resistors/ 

braking resistors as base components 

1) 

1) 

Options that can be supplied from Siemens as well as from Product Partners for Drives Options. 

Schematic circuit diagram 


You can find more information on the Internet at 

www.siemens.com/drives-options-partner 




mySupport documentation 

■ Overview 

mySupport documentation – 

Compiling personal documents 

■ Benefits 

•Display 

View, print or download standard documents or personalized 

documents 

•Configure 

Transfer standard documents or parts of them to personalized 

documents 

• Generate/Manage 

Generate and manage personalized documents in the formats 

PDF, RTF or XML in all available languages 

mySupport documentation is a web-based system for generating 

personalized documentation based on standard documents 

and is part of the Siemens Industry Online Support portal. 

In mySupport, a personal document library can be created in the 

"Documentation" category. This library can be accessed online 

in mySupport or also be generated in various formats for offline 

use. 

Previously, this functionality was available in the My Documentation 

Manager for configurable manuals. Due to the integration in 

mySupport, all entries of the Industry Online Support can now 

be imported into the personal document library, including FAQs 

or product notifications. 

If you have already worked with the My Documentation Manager, 

all of the previously created libraries will continue to be available 

without restrictions in mySupport. 

In addition, the personal library in mySupport can be shared with 

other mySupport users. In this way, a collection of relevant 

documents can be created very effectively and used together 

with other mySupport users all over the world. 

You must register/log in for configuring and generating/ 

managing. 

■ Function 

Opening mySupport documentation in the Industry Online 

Support portal 

• About the product support, entry type "Manual": 

https://support.industry.siemens.com/cs/ww/en/ps/man 

By clicking on the required version of the manual and then 

"Show and configure", the manual opens in a modular view, 

where you can navigate from topic to topic. Here the direct link 

to a topic can be used and made available to other users. The 

selected document can be added to the personal library via 

"mySupport Cockpit" > "Add to mySupport documentation". 

• Via the direct link 

https://support.industry.siemens.com/my/ww/en/ 

documentation/advanced 

After logon/registration, the online help is displayed as the 

current document. 


You can find additional information on the Internet at 

• https://support.industry.siemens.com/my/ww/en/ 

documentation 

• https://support.industry.siemens.com/cs/helpcenter/en/ 

index.htm?#persoenliche_bibliothek_aufbauen.htm 

4 


4/19


4 


Documentation 

General documentation 

■ Overview 

A high-quality programmable control or drive system can be 

used to maximum effect only if the user is aware of the performance 

of the products used as a result of intensive training 

and good technical documentation. 

This is becoming more important due to the shorter innovation 

cycles of modern automation products and the convergence 

of electronics and mechanical engineering. 

A comprehensive range of documentation is available which 

includes a Getting Started guide, operating instructions, 

installation manuals and a list manual. 

The documents are available in hardcopy form or as a PDF file 

for downloading from the Internet. 

Information and documentation relating to SINUMERIK, 

SINAMICS, SIMOTION and SIMOTICS are available on the 

Internet at 



Explanations of the manuals: 

• Operating Instructions 

contain all the information needed to install the device and 

make electrical connections, information about commissioning 

and a description of the converter functions. 

Phases of use: Control cabinet construction, commissioning, 

operation, maintenance and servicing. 

• Hardware Installation Manual 

contains all relevant information about the intended use of the 

components of a system (technical specifications, interfaces, 

dimensional drawings, characteristics, or possible applications), 

information about installation and electrical connections 

and information about maintenance and servicing. 

Phases of use: Control cabinet configuration/construction, 

maintenance and servicing. 

• Operating and Installation Instructions 

(for converter and accessories) 

contain all relevant information about the intended use of the 

components, such as technical specifications, interfaces, 

dimensional drawings, characteristics, or possible 

applications. 

Phases of use: Control cabinet configuration/construction. 

• Manual/Configuration Manual 

contains all necessary information about the intended use 

of the components of a system, e.g. technical specifications, 

interfaces, dimensional drawings, characteristics, or possible 

applications. 

Phases of use: Cabinet configuration/setup, circuit diagram 

configuration/drawing. 

• Commissioning Manual 

contains all information relevant to commissioning after 

installation and wiring. It also contains all safety and warning 

notices relevant to commissioning in addition to overview 

drawings. 

Phases of use: Commissioning of components that have 

already been connected, configuration of system functions. 

• List Manual 

contains all parameters, function diagrams, and faults/alarms 

for the product/system as well as their meanings and setting 

options. It contains parameter data and fault/alarm descriptions 

with functional correlations. 


already been connected, configuration of system functions, 

fault cause/diagnosis. 

• Getting Started 

provides information about getting started for the first-time 

user as well as references to additional information. It contains 

information about the basic steps to be taken during commissioning. 

The information in the other documentation should 

be carefully observed for all of the other work required. 


already been connected. 

• Function Manual Drive Functions 

contains all the relevant information about individual drive 

functions: Description, commissioning and integration in the 

drive system. 


already been connected, configuration of system functions. 




Documentation 

General documentation 


Description 

Article No. 

Automating with PROFINET: 

Via bookstore 

Industrial Communication Based on 

Industrial Ethernet 

•German ISBN 978-3-89578-293-0 

• English ISBN 978-3-89578-294-7 

SINAMICS G120X documentation 

■ Overview 



Further documentation, such as the operating instructions, is 

available free on the Internet at: 


Detailed information on the SINAMICS G120X infrastructure converters 

for HVAC/Water/Wastewater, including the latest technical 

documentation (brochures, tutorials, dimensional drawings, 

certificates and operating instructions), is available on the 

Internet at: 


and is also available via the Drive Technology Configurator 

(DT Configurator) on the Internet. 

The DT Configurator can be found in the Siemens Industry Mall 

at the following address: 


4 



4/21



Documentation 

Notes 

4 


Appendix 


5 

5/2 Certificates of suitability (approvals) 

5/4 Software licenses 

5/6 Conversion tables 

5/8 Metal surcharges 

5/11 Conditions of sale and delivery 



Appendix 

Certificates of suitability (approvals) 

■ Overview 

Many of the products in this catalog fulfill requirements, e.g. for 

UL, CSA or FM and are labeled with the corresponding approval 

designation. 

All of the certificates of suitability, approvals, certificates, 

declarations of conformity, test certificates, e.g. CE, UL, Safety 

Integrated etc. have been performed with the associated system 

components as they are described in the Catalogs and 

Configuration Manuals. 

The certificates are only valid if the products are used with the 

described system components, are installed according to the 

Installation Guidelines and used for their intended purpose. 

In other cases, the vendor of these products is responsible for 

arranging for the issue of new certificates. 

5 

Test code Tested by Device series/ 

Component 

UL: Underwriters Laboratories 

Independent public testing body in North America 

UL according to UL standard 

UL according to CSA standard 

UL according to UL and CSA standards 

Test standard 

Product category/ 

File No. 

SINUMERIK Standard UL 508, CSA C22.2 No. 142 NRAQ/7.E164110 

NRAQ/7.E217227 

SIMOTION Standard UL 508, CSA C22.2 No. 142 NRAQ/7.E164110 

SINAMICS Standard UL 508, 508C, 61800-5-1 

CSA C22.2 No. 142, 274 

NRAQ/7.E164110, 

NMMS/2/7/8.E192450, 

NMMS/2/7/8.E203250, 

NMMS/7.E214113, 

NMMS/7.E253831 

NMMS/2/7/8.E121068 

NMMS/7.E355661 

NMMS/7.E323473 

UL according to UL standard 

SIMODRIVE Standard UL 508C, CSA C22.2 No. 274 NMMS/2/7/8.E192450 

NMMS/7.E214113 

UL according to CSA standard 

SIMOTICS Standard UL 1004-1, 1004-6, 1004-8, 

CSA C22.2 No. 100 

PRGY2/8.E227215 

PRHZ2/8.E93429 

UL according to UL and CSA standards 

PRHJ2/8.E342747 

PRGY2/8.E253922 

PRHZ2/8.E342746 

Line/motor reactors Standard UL 508, 506, 5085-1, 5085-2, 1561, XQNX2/8.E257859 

CSA C22.2 No. 14, 47, 66.1-06, 66.2-06 

NMTR2/8.E219022 

NMMS2/8.E333628 

XPTQ2/8.E257852 

XPTQ2/8.E103521 

NMMS2/8.E224872 

XPTQ2/8.E354316 

XPTQ2/8.E198309 

XQNX2/8.E475972 

Line filters, dv/dt filters, UL 1283, CSA C22.2 No. 8 

FOKY2/8.E70122 

sine-wave filters 

Resistors UL 508, 508C, CSA C22.2 No. 14, 274 NMTR2/8.E224314 

NMMS2/8.E192450 

NMTR2/8.E221095 

NMTR2/8.E226619 

TUV: TUV Rheinland of North America Inc. 

Independent public testing body in North America, Nationally Recognized Testing Laboratory (NRTL) 

TÜV: TÜV SÜD Product Service 

Independent public testing body in Germany, Nationally Recognized Testing Laboratory (NRTL) for North America 

TUV according to UL and CSA standards SINAMICS NRTL listing according to standard UL 508C U7V 12 06 20078 013 

U7 11 04 20078 009 

U7 11 04 20078 010 

U7 11 04 20078 011 

SIMOTION NRTL listing according to standard UL 508 U7V 13 03 20078 01 

SIMODRIVE NRTL listing according to standard UL 508C, CU 72090702 

CSA C22.2. No. 14 

Motion Control Encoder NRTL listing according to UL 61010-1 U8V 10 06 20196 024 

CSA C22.2 No. 61010-1 



Appendix 

Certificates of suitability (approvals) 

■ Overview 

Test code Tested by Device series/ 

Component 

CSA: Canadian Standards Association 

Independent public testing body in Canada 

Test standard 

Product category/ 

File No. 

CSA according to CSA standard SINUMERIK Standard CSA C22.2 No. 142 2252-01 : LR 102527 

FMRC: Factory Mutual Research Corporation 

Independent public testing body in North America 

FM according to FM standard SINUMERIK Standard FMRC 3600, FMRC 3611, 

FMRC 3810, ANSI/ISA S82.02.1 

– 

EAC: Ivanovo-Certificate 

Independent public testing body in the Russian Federation 

EAC in accordance with the EAC Directive SINAMICS 

SINUMERIK 

SIMOTION 

RCM: Australian Communications and Media Authority 

Independent public testing body in Australia 

RCM according to EMC standard 

KC: National Radio Research Agency 

Independent public testing body in South Korea 

KC according to EMC standard 

SINAMICS 

SINUMERIK 

SIMOTION 

SINAMICS 

SINUMERIK 

SIMOTION 

BIA 

Federal Institute for Occupational Safety 

– Functional safety SINAMICS 

SINUMERIK 

SIMOTION 

TÜV SÜD Rail 

– Functional safety SINAMICS 

SINUMERIK 

SIMOTION 

Standard IEC 61800-5-1/-2, IEC 61800-3 – 

Standard IEC AS 61800-3, EN 61800-3 – 

Standard KN 11 – 

Standard EN 61800-5-2 – 

Standard EN 61800-5-2 – 

More information about certificates can be found online at: 

https://support.industry.siemens.com/cs/ww/en/ps/cert 

5 


5/3


Appendix 

5 

Software licenses 

■ Overview 

Software types 

Software requiring a license is categorized into types. 

The following software types have been defined: 

• Engineering software 

• Runtime software 

Engineering software 

This includes all software products for creating (engineering) 

user software, e.g. for configuring, programming, parameterizing, 

testing, commissioning or servicing. 

Data generated with engineering software and executable 

programs can be duplicated for your own use or for use by thirdparties 

free-of-charge. 

Runtime software 

This includes all software products required for plant/machine 

operation, e.g. operating system, basic system, system expansions, 

drivers, etc. 

The duplication of the runtime software and executable programs 

created with the runtime software for your own use or for 

use by third-parties is subject to a charge. 

You can find information about license fees according to use in 

the ordering data (e.g. in the catalog). Examples of categories of 

use include per CPU, per installation, per channel, per instance, 

per axis, per control loop, per variable, etc. 

Information about extended rights of use for parameterization/configuration 

tools supplied as integral components of the 

scope of supply can be found in the readme file supplied with 

the relevant product(s). 

License types 

Siemens Industry Automation & Drive Technologies offers various 

types of software license: 

• Floating license 

• Single license 

• Rental license 

• Rental floating license 

• Trial license 

• Demo license 

• Demo floating license 

Floating license 

The software may be installed for internal use on any number of 

devices by the licensee. Only the concurrent user is licensed. 

The concurrent user is the person using the program. Use 

begins when the software is started. 

A license is required for each concurrent user. 

Single license 

Unlike the floating license, a single license permits only one 

installation of the software per license. 

The type of use licensed is specified in the ordering data and 

in the Certificate of License (CoL). Types of use include for 

example per instance, per axis, per channel, etc. 

One single license is required for each type of use defined. 

Rental license 

A rental license supports the "sporadic use" of engineering 

software. Once the license key has been installed, the software 

can be used for a specific period of time (the operating hours do 

not have to be consecutive). 

One license is required for each installation of the software. 

Rental floating license 

The rental floating license corresponds to the rental license, 

except that a license is not required for each installation of the 

software. Rather, one license is required per object (for example, 

user or device). 

Trial license 

A trial license supports "short-term use" of the software in a nonproductive 

context, e.g. for testing and evaluation purposes. 

It can be transferred to another license. 

Demo license 

The demo license support the "sporadic use" of engineering software 

in a non-productive context, for example, use for testing 

and evaluation purposes. It can be transferred to another 

license. After the installation of the license key, the software can 

be operated for a specific period of time, whereby usage can be 

interrupted as often as required. 

One license is required per installation of the software. 

Demo floating license 

The demo floating license corresponds to the demo license, 

except that a license is not required for each installation of the 

software. Rather, one license is required per object (for example, 

user or device). 

Certificate of License (CoL) 

The CoL is the licensee's proof that the use of the software has 

been licensed by Siemens. A CoL is required for every type of 

use and must be kept in a safe place. 

Downgrading 

The licensee is permitted to use the software or an earlier version/release 

of the software, provided that the licensee owns 

such a version/release and its use is technically feasible. 

Delivery versions 

Software is constantly being updated. 

The following delivery versions 

• PowerPack 

• Upgrade 

can be used to access updates. 

Existing bug fixes are supplied with the ServicePack version. 

PowerPack 

PowerPacks can be used to upgrade to more powerful software. 

The licensee receives a new license agreement and CoL 

(Certificate of License) with the PowerPack. This CoL, together 

with the CoL for the original product, proves that the new software 

is licensed. 

A separate PowerPack must be purchased for each original 

license of the software to be replaced. 

Upgrade 

An upgrade permits the use of a new version of the software on 

the condition that a license for a previous version of the product 

is already held. 

The licensee receives a new license agreement and CoL with 

the upgrade. This CoL, together with the CoL for the previous 

product, proves that the new version is licensed. 

A separate upgrade must be purchased for each original license 

of the software to be upgraded. 



Appendix 

Software licenses 

■ Overview 

ServicePack 

ServicePacks are used to debug existing products. 

ServicePacks may be duplicated for use as prescribed according 

to the number of existing original licenses. 

License key 

Siemens Industry Automation & Drive Technologies supplies 

software products with and without license keys. 

The license key serves as an electronic license stamp and 

is also the "switch" for activating the software (floating license, 

rental license, etc.). 

The complete installation of software products requiring license 

keys includes the program to be licensed (the software) and the 

license key (which represents the license). 

Software Update Service (SUS) 

As part of the SUS contract, all software updates for the respective 

product are made available to you free of charge for a period 

of one year from the invoice date. The contract will automatically 

be extended for one year if it is not canceled three months 

before it expires. 

The possession of the current version of the respective software 

is a basic condition for entering into an SUS contract. 

You can download explanations concerning license conditions from 

https://mall.industry.siemens.com/legal/ww/en/terms_of_trade_en.pdf 

5 


5/5


Appendix 

2 2 2 2 2 2 

Conversion tables 

■ Rotary inertia (to convert from A to B, multiply by entry in table) 

B lb-in 2 lb-ft 2 lb-in-s 2 lb-ft-s 2 

A 

slug-ft 2 kg-cm kg-cm-s gm-cm gm-cm-s oz-in oz-in-s 

lb-in 2 1 6.94 × 10 –3 2.59 × 10 –3 2.15 × 10 –4 2.926 2.98 × 10 –3 2.92 × 10 3 2.984 16 4.14 × 10 –2 

lb-ft 2 144 1 0.3729 3.10 × 10 –2 421.40 0.4297 4.21 × 10 5 429.71 2304 5.967 

lb-in-s 2 386.08 2.681 1 8.33 × 10 –2 1.129 × 10 3 1.152 1.129 × 10 6 1.152 × 10 3 6.177 × 10 3 16 

lb-ft-s 2 4.63 × 10 32.17 12 1 1.35 × 10 4 13.825 1.355 × 10 7 1.38 × 10 4 7.41 × 10 4 192 

slug-ft 2 

kg-cm 2 0.3417 2.37 × 10 –3 8.85 × 10 –4 7.37 × 10 –5 1 1.019 × 10 –3 1000 1.019 5.46 1.41 × 10 –2 

kg-cm-s 2 335.1 2.327 0.8679 7.23 × 10 –2 980.66 1 9.8 × 10 5 1000 5.36 × 10 3 13.887 

gm-cm 2 3.417 × 10 –4 2.37 × 10 –6 8.85 × 10 –7 7.37 × 10 –8 1 × 10 –3 1.01 × 10 –6 1 1.01 × 10 –3 5.46 × 10 –3 1.41 × 10 –5 

gm-cm-s 2 0.335 2.32 × 10 –3 8.67 × 10 –4 7.23 × 10 –5 0.9806 1 × 10 –3 980.6 1 5.36 1.38 × 10 –2 

oz-in 2 0.0625 4.34 × 10 –4 1.61 × 10 –4 1.34 × 10 –5 0.182 1.86 × 10 –4 182.9 0.186 1 2.59 × 10 –3 

oz-in-s 2 24.13 0.1675 6.25 × 10 –2 5.20 × 10 –3 70.615 7.20 × 10 –2 7.09 × 10 4 72.0 386.08 1 

■ Torque (to convert from A to B, multiply by entry in table) 

B lb-in lb-ft oz-in N-m kg-cm kg-m gm-cm dyne-cm 

A 

lb-in 1 8.333 × 10 –2 16 0.113 1.152 1.152 × 10 –2 1.152 × 10 3 1.129 × 10 6 

lb-ft 12 1 192 1.355 13.825 0.138 1.382 × 10 4 1.355 × 10 7 

oz-in 6.25 × 10 –2 5.208 × 10 –3 1 7.061 × 10 –3 7.200 × 10 –2 7.200 × 10 –4 72.007 7.061 × 10 4 

N-m 8.850 0.737 141.612 1 10.197 0.102 1.019 × 10 4 1 × 10 7 

kg-cm 0.8679 7.233 × 10 –2 13.877 9.806 × 10 –2 1 10 –2 1000 9.806 × 10 5 

kg-m 86.796 7.233 1.388 × 10 3 9.806 100 1 1 × 10 5 9.806 × 10 7 

gm-cm 8.679 × 10 –4 7.233 × 10 –5 1.388 × 10 –2 9.806 × 10 –5 1 × 10 –3 1 × 10 –5 1 980.665 

dyne-cm 8.850 × 10 –7 7.375 × 10 –8 1.416 × 10 –5 10 –7 1.0197 × 10 –6 1.019 × 10 –8 1.019 × 10 –3 1 

5 

■ Length (to convert from A to B, multiply by entry in table) 

B inches feet cm yd mm m 

A 

inches 1 0.0833 2.54 0.028 25.4 0.0254 

feet 12 1 30.48 0.333 304.8 0.3048 

cm 0.3937 0.03281 1 1.09 × 10 –2 10 0.01 

yd 36 3 91.44 1 914.4 0.914 

mm 0.03937 0.00328 0.1 1.09 × 10 –3 1 0.001 

m 39.37 3.281 100 1.09 1000 1 

■ Power (to convert from A to B, multiply by entry in table) 

B hp 

Watts 

A 

hp (English) 1 745.7 

(lb-in) (deg./s) 2.645 × 10 –6 1.972 × 10 –3 

(lb-in) (rpm) 1.587 × 10 –5 1.183 × 10 –2 

(lb-ft) (deg./s) 3.173 × 10 –5 2.366 × 10 –2 

(lb-ft) (rpm) 1.904 × 10 –4 0.1420 

Watts 1.341 × 10 –3 1 

■ Force (to convert from A to B, multiply by entry in table) 

B lb oz gm dyne N 

A 

lb 1 16 453.6 4.448 × 10 5 4.4482 

oz 0.0625 1 28.35 2.780 × 10 4 0.27801 

gm 2.205 × 10 –3 0.03527 1 1.02 × 10 –3 N.A. 

dyne 2.248 × 10 –6 3.59 × 10 –5 980.7 1 0.00001 

N 0.22481 3.5967 N.A. 100000 1 

■ Mass (to convert from A to B, multiply by entry in table) 

B lb oz gm kg slug 

A 

lb 1 16 453.6 0.4536 0.0311 

oz 6.25 × 10 –2 1 28.35 0.02835 1.93 × 10 –3 

gm 2.205 × 10 –3 3.527 × 10 –2 1 10 –3 6.852 × 10 –5 

kg 2.205 35.27 10 3 1 6.852 × 10 –2 

slug 32.17 514.8 1.459 × 10 4 14.59 1 

■ Rotation (to convert from A to B, multiply by entry in table) 

B rpm rad/s degrees/s 

A 

rpm 1 0.105 6.0 

rad/s 9.55 1 57.30 

degrees/s 0.167 1.745 × 10 –2 1 



Appendix 

■ Temperature Conversion 

°F °C °C °F 

0 –17.8 –10 14 

32 0 0 32 

50 10 10 50 

70 21.1 20 68 

90 32.2 30 86 

98.4 37 37 98.4 

212 100 100 212 

subtract 32 and multiply by 5 / 9 multiply by 9 / 5 and add 32 

■ Mechanism Efficiencies 

Acme-screw with brass nut ~0.35–0.65 

Acme-screw with plastic nut ~0.50–0.85 

Ball-screw ~0.85–0.95 

Chain and sprocket ~0.95–0.98 

Preloaded ball-screw ~0.75–0.85 

Spur or bevel-gears ~0.90 

Timing belts ~0.96–0.98 

Worm gears ~0.45–0.85 

Helical gear (1 reduction) ~0.92 

■ Friction Coefficients 

Materials 

 

Steel on steel (greased) ~0.15 

Plastic on steel ~0.15–0.25 

Copper on steel ~0.30 

Brass on steel ~0.35 

Aluminum on steel ~0.45 

Steel on steel ~0.58 

Mechanism 

 

Ball bushings


Appendix 

5 

Metal surcharges 

1) 2) 3) 4) 

■ Explanation of the raw material/metal surcharges 

Surcharge calculation 

To compensate for variations in the price of the raw materials 

silver, copper, aluminum, lead, gold, dysprosium 2) and/or 

neodym 2) , surcharges are calculated on a daily basis using the 

so-called metal factor for products containing these raw 

materials. A surcharge for the respective raw material is calculated 

as a supplement to the price of a product if the basic 

official price of the raw material in question is exceeded. 

The surcharges are calculated in accordance with the following 

criteria: 

• Basic official price of the raw material 

Basic official price from the day prior to receipt of the order or 

prior to release order (daily price) for 3) 

- Silver (sales price, processed) 

- Gold (sales price, processed) 

and for 4) 

- Copper (lower DEL notation + 1 %) 

- Aluminum (aluminum in cables) 

- Lead (lead in cables) 

• Metal factor of the products 

Certain products are displayed with a metal factor. The metal 

factor determines the official price (for those raw materials 

concerned) as of which the metal surcharges are applied and 

the calculation method used (weight or percentage method). 

An exact explanation is given below. 

Structure of the metal factor 

The metal factor consists of several digits; the first digit indicates 

whether the percentage method of calculation refers to the list 

price or a possible discounted price (customer net price) (L = list 

price / N = customer net price). 

The remaining digits indicate the method of calculation used for 

the respective raw material. If no surcharge is added for a raw 

material, a "-" is used. 

1st digit List or customer net price using the percentage method 

2nd digit for silver (AG) 

3rd digit for copper (CU) 

4th digit for aluminum (AL) 

5th digit for lead (PB) 

6th digit for gold (AU) 

7th digit for dysprosium (Dy) 2) 

8th digit for neodym (Nd) 2) 

Weight method 

The weight method uses the basic official price, the daily price 

and the raw material weight. In order to calculate the surcharge, 

the basic official price must be subtracted from the daily price. 

The difference is then multiplied by the raw material weight. 

The basic official price can be found in the table below using the 

number (1 to 9) of the respective digit of the metal factor. The raw 

material weight can be found in the respective product descriptions. 

Percentage method 

Use of the percentage method is indicated by the letters A-Z at 

the respective digit of the metal factor. 

The surcharge is increased - dependent on the deviation of the 

daily price compared with the basic official price - using the percentage 

method in "steps" and consequently offers surcharges 

that remain constant within the framework of this "step range". A 

higher percentage rate is charged for each new step. The respective 

percentage level can be found in the table below. 

Metal factor examples 

L E A – – – – – 

N – A 6 – – – – 

– – 3 – – – – – 

Basis for % surcharge: List price 

Silver Basis 150 €, Step 50 €, 0.5 % 

Copper Basis 150 €, Step 50 €, 0.1 % 

No surcharge for aluminum 

No surcharge for lead 

No surcharge for gold 

No surcharge for dysprosium 

No surcharge for neodym 

Basis for % surcharge: Customer net price 

No surcharge for silver 

Copper Basis 150 €, Step 50 €, 0.1 % 

Aluminum acc. to weight, basic offic. price 225 € 





No basis necessary 


Copper acc. to weight, basic official price 150 € 






1) Refer to the separate explanation on the next page regarding the raw materials dysprosium and neodym (= rare earths). 

2) For a different method of calculation, refer to the separate explanation for these raw materials on the next page. 

3) Source: Umicore, Hanau (www.metalsmanagement.umicore.com). 

4) Source: Schutzvereinigung DEL-Notiz e.V. (www.del-notiz.org). 



Appendix 


1) 2) 

■ Explanation of the raw material/metal surcharges for dysprosium and neodym (rare earths) 

Surcharge calculation 

To compensate for variations in the price of the raw materials 

silver 1) , copper 1) , aluminum 1) , lead 1) , gold 1) , dysprosium 

and/or neodym, surcharges are calculated on a daily basis 

using the so-called metal factor for products containing these 

raw materials. The surcharge for dysprosium and neodym is 

calculated as a supplement to the price of a product if the basic 

official price of the raw material in question is exceeded. 

The surcharge is calculated in accordance with the following 

criteria: 

• Basic official price of the raw material 2) 

Three-month basic average price (see below) in the period 

before the quarter in which the order was received or the release 

order took place (= average official price) for 

- dysprosium (Dy metal, 99 % min. FOB China; USD/kg) 

- neodym (Nd metal, 99 % min. FOB China; USD/kg) 

• Metal factor of the products 

Certain products are displayed with a metal factor. The metal 

factor indicates (for those raw materials concerned) the basic 

official price as of which the surcharges for dysprosium and 

neodym are calculated using the weight method. An exact explanation 

of the metal factor is given below. 

Three-month average price 

The prices of rare earths vary according to the foreign currency, 

and there is no freely accessible stock exchange listing. This 

makes it more difficult for all parties involved to monitor changes 

in price. In order to avoid continuous adjustment of the surcharges, 

but to still ensure fair, transparent pricing, an average 

price is calculated over a three-month period using the average 

monthly foreign exchange rate from USD to EUR (source: European 

Central Bank). Since not all facts are immediately available 

at the start of each month, a one-month buffer is allowed before 

the new average price applies. 

Examples of calculation of the average official price: 

Period for calculation of 

the average price: 

Sep 2012 - Nov 2012 

Dec 2012 - Feb 2013 

Mar 2013 - May 2013 

Jun 2013 - Aug 2013 

Period during which the order/release order is 

effected and the average price applies: 

Q1 in 2013 (Jan - Mar) 

Q2 in 2013 (Apr - Jun) 

Q3 in 2013 (Jul - Sep) 

Q4 in 2013 (Oct - Dec) 

Weight method 

The weight method uses the basic official price, the average 

price and the raw material weight. In order to calculate the surcharge, 

the basic official price must be subtracted from the average 

price. The difference is then multiplied by the raw material 

weight. 

The basic official price can be found in the table below using the 

number (1 to 9) of the respective digit of the metal factor. Your 

Sales contact can inform you of the raw material weight. 

Metal factor examples 

– – – – – – 7 1 

No basis necessary 


No surcharge for copper 




Dysprosium acc. to weight, basic official price 

300 € 

Neodym acc. to weight, basic official price 50 € 

Structure of the metal factor 

The metal factor consists of several digits; the first digit is not 

relevant to the calculation of dysprosium and neodym. 

The remaining digits indicate the method of calculation used for 

the respective raw material. If no surcharge is added for a raw 

material, a "-" is used. 

1st digit List or customer net price using the percentage method 

2nd digit for silver (AG) 1) 

3rd digit for copper (CU) 1) 

4th digit for aluminum (AL) 1) 

5th digit for lead (PB) 1) 

6th digit for gold (AU) 1) 

7th digit for dysprosium (Dy) 

8th digit for neodym (Nd) 

5 

1) For a different method of calculation, refer to the separate explanation for these raw materials on the previous page. 

2) Source: Asian Metal Ltd (www.asianmetal.com) 


5/9


Appendix 


5 

■ Values of the metal factor 

Percentage 

method 

Basic official 

price 

in € 

Step range 

in € 

% surcharge 

1st step 

% surcharge 

2nd step 

% surcharge 

3rd step 

% surcharge 

4th step 

Price in € Price in € Price in € Price in € 

150.01 - 200.00 200.01 - 250.00 250.01 - 300.00 300.01 - 350.00 

% surcharge 

per additional 

step 

A 150 50 0.1 0.2 0.3 0.4 0.1 

B 150 50 0.2 0.4 0.6 0.8 0.2 

C 150 50 0.3 0.6 0.9 1.2 0.3 

D 150 50 0.4 0.8 1.2 1.6 0.4 

E 150 50 0.5 1.0 1.5 2.0 0.5 

F 150 50 0.6 1.2 1.8 2.4 0.6 

G 150 50 1.0 2.0 3.0 4.0 1.0 

H 150 50 1.2 2.4 3.6 4.8 1.2 

I 150 50 1.6 3.2 4.8 6.4 1.6 

J 150 50 1.8 3.6 5.4 7.2 1.8 

175.01 - 225.00 225.01 - 275.00 275.01 - 325.00 325.01 - 375.00 

O 175 50 0.1 0.2 0.3 0.4 0.1 

P 175 50 0.2 0.4 0.6 0.8 0.2 

R 175 50 0.5 1.0 1.5 2.0 0.5 

225.01 - 275.00 275.01 - 325.00 325.01 - 375.00 375.01 - 425.00 

S 225 50 0.2 0.4 0.6 0.8 0.2 

U 225 50 1.0 2.0 3.0 4.0 1.0 

V 225 50 1.0 1.5 2.0 3.0 1.0 

W 225 50 1.2 2.5 3.5 4.5 1.0 

150.01 - 175.00 175.01 - 200.00 200.01 - 225.00 225.01 - 250.00 

Y 150 25 0.3 0.6 0.9 1.2 0.3 

400.01 - 425.00 425.01 - 450.00 450.01 - 475.00 475.01 - 500.00 

Z 400 25 0.1 0.2 0.3 0.4 0.1 

L 

N 

Weight 

method 

Price basis (1st digit) 

Basic official price in € 

Calculation based on the list price 

Calculation based on the customer net price (discounted list price) 

1 50 Calculation based on raw material weight 

2 100 

3 150 

4 175 

5 200 

6 225 

7 300 

8 400 

9 555 

Miscellaneous 

- No metal surcharge 



Appendix 

Conditions of sale and delivery 

■ 1. General Provisions 

By using this catalog you can purchase products (hardware, 

software and services) described therein from Siemens Aktiengesellschaft 

subject to the following Terms and Conditions of 

Sale and Delivery (hereinafter referred to as "T&C"). Please note 

that the scope, the quality and the conditions for supplies and 

services, including software products, by any Siemens entity 

having a registered office outside Germany, shall be subject 

exclusively to the General Terms and Conditions of the 

respective Siemens entity. The following T&C apply exclusively 

for orders placed with Siemens Aktiengesellschaft, Germany. 

1.1 For customers with a seat or registered office in 

Germany 

For customers with a seat or registered office in Germany, the 

following terms and conditions apply subordinate to T&C: 

• for products, which include specific terms and conditions in 

the description text, these specific terms and conditions shall 

apply and subordinate thereto, 

• for installation work the "General Conditions for Erection 

Works Germany" 1) ("Allgemeine Montagebedingungen 

Deutschland" (currently only available in German)) and/or 

• for stand-alone software products and software products 

forming a part of a product or project, the "General License 

Conditions for Software Products for Automation and Drives 

for Customers with a Seat or registered Office in Germany" 1) 

and/or 

• for consulting services the "General Terms and Conditions for 

Consulting Services of the Division DF Germany" 1) and/or 

• for other supplies and/or services the "General Conditions for 

the Supply of Products and Services of the Electrical and 

Electronics Industry" 1) . 

In case such supplies and/or services should contain Open 

Source Software, the conditions of which shall prevail over the 

"General Conditions for the Supply of Products and Services 

of the Electrical and Electronics Industry" 1) , a notice will be 

contained in the scope of delivery in which the applicable 

conditions for Open Source Software are specified. This shall 

apply mutatis mutandis for notices referring to other third party 

software components. 

1.2 For customers with a seat or registered office outside 

Germany 

For customers with a seat or registered office outside Germany, 

the following terms and conditions apply subordinate to T&C: 

• for products, which include specific terms and conditions in 

the description text, these specific terms and conditions shall 

apply and subordinate thereto, 

• for services the "International Terms & Conditions for 

Services" 1) supplemented by "Software Licensing 

Conditions" 1) and/or 

• for consulting services the "General Terms and Conditions for 

Consulting Services of the Division DF Germany" 1) and/or 

• for other supplies of hard- and software the "International 

Terms & Conditions for Products" 1) supplemented by 

"Software Licensing Conditions" 1) 

1.3 For customers with master or framework agreement 

To the extent our supplies and/or services offered are covered 

by an existing master or framework agreement, the terms and 

conditions of that agreement shall apply instead of T&C. 

■ 2. Prices 

The prices are in € (Euro) ex point of delivery, exclusive of 

packaging. 

The sales tax (value added tax) is not included in the prices. It 

shall be charged separately at the respective rate according to 

the applicable statutory legal regulations. 

Prices are subject to change without prior notice. We will charge 

the prices valid at the time of delivery. 

To compensate for variations in the price of raw materials (e.g. 

silver, copper, aluminum, lead, gold, dysprosium and neodym), 

surcharges are calculated on a daily basis using the so-called 

metal factor for products containing these raw materials. A 

surcharge for the respective raw material is calculated as a 

supplement to the price of a product if the basic official price of 

the raw material in question is exceeded. 

The metal factor of a product indicates the basic official price 

(for those raw materials concerned) as of which the surcharges 

on the price of the product are applied, and with what method of 

calculation. 

You will find a detailed explanation of the metal factor on the 

page headed "Metal surcharges". 

To calculate the surcharge (except in the cases of dysprosium 

and neodym), the official price from the day prior to that on which 

the order was received or the release order was effected is used. 

To calculate the surcharge applicable to dysprosium and 

neodym ("rare earths"), the corresponding three-month basic 

average price in the quarter prior to that in which the order was 

received or the release order was effected is used with a onemonth 

buffer (details on the calculation can be found in the 

explanation of the metal factor). 

■ 3. Additional Terms and Conditions 

The dimensions are in mm. In Germany, according to the 

German law on units in measuring technology, data in inches 

apply only to devices for export. 

Illustrations are not binding. 

Insofar as there are no remarks on the individual pages of this 

catalog – especially with regard to data, dimensions and weights 

given – these are subject to change without prior notice. 

5 

1) The text of the Terms and Conditions of Siemens AG can be 

downloaded at 

https://mall.industry.siemens.com/legal/ww/en/ 

terms_of_trade_en.pdf 


5/11


Appendix 

Conditions of sale and delivery 

■ 4. Export regulations 

We shall not be obligated to fulfill any agreement if such 

fulfillment is prevented by any impediments arising out of 

national or international foreign trade or customs requirements 

or any embargoes and/or other sanctions. 

Export may be subject to license. We shall indicate in the 

delivery details whether licenses are required under German, 

European and US export lists. 

Our products are controlled by the U.S. Government (when 

labeled with "ECCN" unequal "N") and authorized for export only 

to the country of ultimate destination for use by the ultimate 

consignee or end-user(s) herein identified. They may not be 

resold, transferred, or otherwise disposed of, to any other 

country or to any person other than the authorized ultimate 

consignee or end-user(s), either in their original form or after 

being incorporated into other items, without first obtaining 

approval from the U.S. Government or as otherwise authorized 

by U.S. law and regulations. 

The export indications can be viewed in advance in the 

description of the respective goods on the Industry Mall, our 

online catalog system. Only the export labels "AL" and "ECCN" 

indicated on order confirmations, delivery notes and invoices 

are authoritative. 

Products labeled with "AL" unequal "N" are subject to 

European / national export authorization. Products without label, 

with label "AL:N" / "ECCN:N", or label "AL:9X9999" / 

"ECCN: 9X9999" may require authorization from responsible 

authorities depending on the final end-use, or the destination. 

If you transfer goods (hardware and/or software and/or 

technology as well as corresponding documentation, regardless 

of the mode of provision) delivered by us or works and services 

(including all kinds of technical support) performed by us to a 

third party worldwide, you must comply with all applicable national 

and international (re-)export control regulations. 

If required for the purpose of conducting export control checks, 

you (upon request by us) shall promptly provide us with all information 

pertaining to the particular end customer, final disposition 

and intended use of goods delivered by us respectively 

works and services provided by us, as well as to any export 

control restrictions existing in this relation. 

The products listed in this catalog may be subject to 

European/German and/or US export regulations. Any export 

requiring approval is therefore subject to authorization by the 

relevant authorities. 

Errors excepted and subject to change without prior notice. 

5 



Selection and ordering at Siemens 

Industry Mall, downloading and ordering catalogs 

Easy product selection and ordering: Industry Mall 

Industry Mall 

The Industry Mall is a Siemens AG Internet ordering platform. 

It provides you with online access to a comprehensive product 

spectrum that is presented in an informative, well-organized 

way. 

Powerful search functions help you select the required products, 

while configurators enable you to configure complex product 

and system components quickly and easily. CAx data are also 

available for you to use. 

Data transfer allows the entire procedure, from selection through 

ordering to tracking and tracing, to be carried out online. 

Availability checks, individual customer discounting, and 

quotation preparation are also possible. 


Downloading catalogs 

Siemens Industry Online Support 

You can download catalogs and brochures in PDF format from 

Siemens Industry Online Support without having to register. 

The filter box makes it possible to perform targeted searches. 

www.siemens.com/industry-catalogs 

Ordering printed catalogs 

Please contact your local Siemens branch if you are interested 

in ordering printed catalogs. 

Addresses can be found at 




Get more information 


for HVAC/Water/Wastewater: 


SIMOTICS electric motors: 


Motion Control Systems and Solutions for production 

machine and machine tool equipment: 

www.siemens.com/motioncontrol 

Local partners worldwide: 


Published by 

Siemens AG 

Digital Industries 

Motion Control 

Postfach 31 80 

91050 Erlangen, Germany 

PDF (Article No. E86060-K5531-A151-A3-7600) 

V6.MKKATA.GMC.106 

KG 0320 126 En 

Produced in Germany 


For the U.S. published by 

Siemens Industry Inc. 

5300 Triangle Parkway 

Norcross, GA 30092 

United States 

Subject to changes and errors. The information given in this document 

only contains general descriptions and/or performance features 

which may not always specifically reflect those described, or which 

may undergo modification in the course of further development of 

the products. The requested performance features are binding only 

when they are expressly agreed upon in the concluded contract. 

All product designations may be trademarks or product names of 

Siemens AG or other companies whose use by third parties for their 

own purposes could violate the rights of the owners. 

Security information 

Siemens provides products and solutions with industrial 

security functions that support the secure operation of 

plants, systems, machines and networks. 

In order to protect plants, systems, machines and networks 

against cyber threats, it is necessary to implement – and 

continuously maintain – a holistic, state-of-the-art industrial 

security concept. Siemens’ products and solutions 

constitute one element of such a concept. 

Customers are responsible for preventing unauthorized 

access to their plants, systems, machines and networks. 

Such systems, machines and components should only be 

connected to an enterprise network or the internet if and 

to the extent such a connection is necessary and only 

when appropriate security measures (e.g. firewalls and/or 

network segmentation) are in place. 

For additional information on industrial security measures 

that may be implemented, please visit 


Siemens’ products and solutions undergo continuous 

development to make them more secure. Siemens strongly 

recommends that product updates are applied as soon as 

they are available and that the latest product versions are 

used. Use of product versions that are no longer supported, 

and failure to apply the latest updates may increase 

customer’s exposure to cyber threats. 

To stay informed about product updates, subscribe to the 

Siemens Industrial Security RSS Feed under

motion-control-drives-D31-5-complete-English-2020-03-Update-2020-08

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?