Solar energy systems & prices - Solution Solartechnik GmbH

www.sol-ution.com 

Solar energy systems & prices 

2006 

100 % heating and 

hot water from the sun

Ralf Mitterlehner 

Sales Director 

Tel: (+43) 0664/41 11 493 

D: +49 (0) 170/16 73 699 

ralf.mitterlehner@sol-ution.com 

Ing. Herbert Höglinger 

Transportlogistics 

Technics, solarsystems + pelletstoves 

Tel: +43 (0) 7244/20 280-13 

herbert.hoeglinger@sol-ution.com 

Deliverytime for pelletstoves 

1-10 days 

Eva Reindl 

Bookkeeping/Finances 

Tel: +43 (0) 7244/20 280-12 

eva.reindl@sol-ution.com 

Thank you for respecting 

our term of payment! 

Andrea Ecklbauer 

Disposition, crane scheduling 

Tel: +43 (0) 7244/20 280-14 

andrea.ecklbauer@sol-ution.com 

Deliverytime formounting 5-10 days 

Sales Austria: 

Peter Pichler 

Tel: (+43) 0664/16 11 319 

peter.pichler@sol-ution.com 

ZIP: 8940-8999, 4800-4899, 

4900, 5100-5300 

Toni Helm 

Tel: (+43) 0664/16 11 093 

toni.helm@sol-ution.com 

ZIP: 1060-1099, 1140-1199, 20.., 

25.., 30.., 31.., 32.., 3370-3999 

Karl Länglacher (ohne Hut) 

Tel: (+43) 0664/32 40 607 

karl.laenglacher@sol-ution.com 

ZIP: 4400-4499, 4500-4599, 

4600-4695, 4050-4060, 8900-8940 

Ing. Helmut Schmiedbauer-Wenig 

Tel: (+43) 0664/41 10 733 

helmut.schmiedbauer-wenig@sol-ution.com 

ZIP: 7400-7599, 8010-8629, 

8640-8679, 8700-8899 

Sales partners in: 

FRANCE 

NATURE ENERGIE 

5 Grande rue 

38350 La Mure d'Isère 

Yann Denance 

yann.denance@nature-energie.fr 

Tel.: +33(0)6 87 35 42 75 

Your SOLution team 2006 

Bregenz 

Mag. (FH) Herwig Kaiser 

Sales Director Germany 

Tel: +43 (0) 7244/20 280-20 

Mobil: (+43) 0664/84 65 996 

herwig.kaiser@sol-ution.com 

Ing. Andreas Grimm 

Technics, Solarsystems 

Tel: +43 (0) 7244/20 280-15 

andreas.grimm@sol-ution.com 

Technical planning 1-5 days 

Cindy Kuste 

Assistant of the executive board 

Tel: +43 (0) 7244/20 280-22 

Mobil: (+43) 0664/85 99 905 

office@sol-ution.com 

Barbara Mörtenhuber 

Office management 

Tel: +43 (0) 7244/20 280-11 

barbara.moertenhuber@sol-ution.com 

Ing. Harald Ramusch 

Tel: (+43) 0664/84 69 395 

harald.ramusch@sol-ution.com 

ZIP: 9000-9999 

Helmut Samwald 

Tel: (+43) 0664/24 05 864 

helmut.samwald@sol-ution.com 

ZIP: 1010-1050, 1100-1130, 

1200-1230, 2100-2499, 26.., 27.., 28.., 

7000-7399, 8682, 8684, 8691, 8694 

Josef Weberberger 

Tel: (+43) 0664/84 08 012 

josef.weberberger@sol-ution.com 

ZIP Austria: 3300-3364, 4000-4049, 

4701-4785, 4061-4099, 4300-4399, 

4200-4285, 4100-4199 

ZIP Germany: 94.. 

Innsbruck 

IRELAND 

Lienz 

Total Energy Management 

Unit 9, Ballybrit Industrial Estate 

Monivea Road, Galway 

Peter Sullivan 

info@tem.ie 

Tel.: +353 (0) 91 769 174 

Salzburg 

Wels 

Sattledt 

Linz 

Klagenfurt 

Oliver Bubic 

Marketing Director 

Tel: +43 (0) 7244/20 280-16 

Mobil: (+43) 0664/84 65 995 

oliver.bubic@sol-ution.com 

Christa Heinzl 

Staffmanagement 

Tel: +43 (0) 7244/20 280-12 

christa.heinzl@sol-ution.com 

Lisa Dobritzhofer 

Office management 

Tel: +43 (0) 7244/20 280-21 

lisa.dobritzhofer@sol-ution.com 

Andrea Dickinger Neuwirth 

Assistant of the Sales Department 

Tel: +43 (0) 7244/20 280 


Siegfried Rausch 

Tel: (+43) 0664/41 11 492 

D: +49 (0) 170/16 73 996 

siegfried.rausch@sol-ution.com 

ZIP Austria: 50.., 51.., 54.., 57.. 

ZIP Germany: 83.. 

Herbert Leissing 

Tel: (+43) 0664/24 03 189 

herbert.leissing@sol-ution.com 

ZIP: 6700-6999 

Johann Ladner 

Tel: (+43) 0664/85 99 429 

johann.ladner@sol-ution.com 

ZIP: 6000-6699 

Amstetten 

St. Pölten 

Graz 

Wien 

Eisenstadt 



Monivea Road, Galway 

Kevin Devine 

info@tem.ie 

Tel.: +353 (0) 91 769 174

Sales Germany: 

Peter Watko 

Tel: +49 (0) 171/36 54 777 

peter.watko@sol-ution.com 

ZIP: 73400-73779, 86700-86759, 

89407-89568, 91710-91738 

Karl Fleischmann 

Tel: +49 (0) 171/53 07 628 

karl.fleischmann@sol-ution.com 

ZIP: 84.., 85.. 

Heinz Krüger 

Tel: +49 (0) 172/76 530 20 

heinz.krueger@sol-ution.com 

ZIP: 72.., 78.., 88.., 89-89400, 

89568-89999 

Dipl.Ing. Joachim Heisters 

Tel: +49 (0) 2163/47 565 

Mobil: +49 (0) 170/32 19 929 

joachim.heisters@sol-ution.com 

ZIP: 40.. - 48.., 50.. - 52.. 

Gunther Greiner 

Tel: +49 (0) 36741/33 11 

Mobil: +49 (0) 171/82 21 261 

gunther.greiner@sol-ution.com 

ZIP: 07-99 

Frank Oster 

Tel: +49 (0) 7143/87 05 40 

Mobil: + 49 (0) 174 / 32 70 215 

frank.oster@sol-ution.com 

ZIP: 74.., 75.. 

Bernhard Weixler 

Tel: +49 (0) 89/74 12 016-0 

Mobil: + 49 (0) 171 / 15 55 889 

bernhard.weixler@sol-ution.com 

ZIP: 86.. 

GERMANY 

LIGNASOL 

HOLZ-SOLAR-HEIZSYSTEME 

Albrecht - Wirt - Straße 1 

72108 Rottenburg - Ergenzingen 

Michael Dietz 

info.sued@lignasol.de 

Tel.: +49 (0) 7457/69 77-15 

Düsseldorf 

Köln 

Bonn 

Weilburg 

Koblenz 

Wiesbaden 

Frankfurt 

Mainz Darmstadt 

Saarbrücken 

Freiburg 

Caption: 

Karlsruhe 

Bremen 

Kassel 

Rottenburg 

Hannover 

Stuttgart 

Tübingen 

Kiel 

Hamburg Schwerin 

Braunschweig 

Würzburg 

Erfurt 

Augsburg 

Magdeburg 

München 

hatched / area of crane mounting 

LIGNASOL 

HOLZ-SOLAR-HEIZSYSTEME 

Steinstraße 4 

35781 Weilburg Waldhausen 

Hegler Andreas 

info.mitte@hegler-solar.de 

Tel.: +49 (0) 6471/98 19 68 

Berlin 

Potsdam 

Leipzig 

Regensburg 

Chemnitz 

In all other areas crane mounting on request. 

Dresden 

HUNGARY 

Gábor Kárpáti 

gabor.karpati@sol-ution.com 

Tel: +36 20/915 46 42

4 

NEW at SOLution! 

SOLIvo.Tec - Perfect pellet solution 

The new pellet stove for the living space assures an efficient and environment 

friendly energy supply. Furthermore it is an integral element of modern 

heating technology. 

SOLIvo.Tec profile is a foresight to the future. The main attributes 

are great heating comfort, ease of operation and security. SOLIvo.Tec also 

offers an automatic ash removal system as well as optional heat exchanger 

cleaning. 

Firewood chimney stove MOMO 

Momo guarantees many cosy hours and pleasant warmth. With a water heat 

exchanger as standard feature it can be connected to the central heating 

system in order to heat all rooms. 

See page 39 and 40 for detailed information and offers. 

New heat water sets 

Now you can take advantage of bigger dimensioned hot water systems. 

INSOL in-roof sets up to 12 m 2 

UNISOL on-roof sets up to 13,5 m 2 

See pages 6 and 8 (in-roof) and pages 7 and 9 (on-roof) for concrete 

descriptions and offers. 

SOLution logistics center 

The SOLution logistics center was completed in June 2005 after a 

construction time of only three months. Since then it became a symbol for 

greater flexibility and shorter transport-time through a connection to the 

nearby autobahn. 

In the course of 2006 the logistics center will be equipped with a 160m 2 

solar system. 

Our logistics center is your advantage! 

www.sol-ution.com

Dear partners, 

an exciting solar year is ahead of us. The general conditions for solar 

energy have improved significantly throughout the last years and a look 

the look into the future is promising. 

The sun as inexhaustible natural energy source can supply every 

household with free energy. As a full-range supplier of solar solutions we 

benefit 100% of the sun’s power. No matter whether you want to use the 

sun for heating or for cooling – SOLution is the right partner. 

Our vision is to equip not only Europe but the whole world with solar 

energy. You, as our partner contribute to the realization of this vision. 

UNISOL 

high-performance panels 

The UNISOL cc creates new opportunities for the mounting of large scale 

modules. New connections allow arranging the panels without gap. This and 

nicely shaped covers make the UNISOL cc an optical highlight. Furthermore a 

soldered full-surface absorber guarantees a high degree of efficiency. 

SOLution wins the award for the best entrepreneur 2005 in the category 

environment! 

See page 9 for detailed information and offers. 

ALASKA solution 

Solar cooling system 

We proudly present a total innovation. After years of development we now have 

solar cooling systems in our product portfolio. The ALASKA systems are suitable 

for gastronomy, cooling chambers and office building. 

See page 14 and 15 for detailed information and offers. 

Become a SOLution Goldpartner 

Why don’t you too become a SOLution Goldpartner. Our 

sales representatives will be glad to give you information 

about how to become a partner and how to benefit from our 

special partner offers. 

We wish you a successful 2006! 

Mrs. Mag. Andrea Dober and Mr. Ing. Gerald Jungreithmayr 

Executiv board

INSOL20 

In-roof hot water supply systems 

In-roof solar energy panels 

system for water heating 

Sheet metal covering 

Ease of installation using modular 

standard-format solar panels 

Modular 2m 2 units which can be 

combined in any manner required 

Simple on-roof installation 

Visually unobstrotive structure 

SOLution SOLIST SOLAR ENERGY IN-ROOF SYSTEM (excl. installation) 

Contents of solar energy systems 

SOLar energy water heating system for 2 - 4 people 

KPI300 6 m 2 In-roof solar panels (3 units INSOL20), 300 l boiler (WSE300), 

pump unit (RGP1862), 25 l expansion tank (ADG25), 

electrical current control unit (ESR21S) 

Georg and 20 l antifreeze (FSK), sheet metal covering (BEF) 3.160,00 

NEW Kompakta 

with air vent 

and flowmeter 

KPI300K like Georg 

Carl (instead of WSE300 with Kompakta*) 3.490,00 



pump unit (RGP1862), expansion tank 33 l (ADG33), 


Franz and 20 l antifreeze (FSK), sheet metal covering (BEF) 3.850,00 





Johann and 20 l antifreeze (FSK), sheet metal covering (BEF) 4.030,00 

NEW Kompakta 

with air vent 

and flowmeter 

KPI500K like Johann 

Joseph (instead of WSE500 with Kompakta*) 4.340,00 

SOLar energy water heating system for für 6 - 7 people 




Sebastian and 20 l anitfreeze (FSK), sheet metal covering (BEF) 4.560,00 


KPI750 12 m 2 In-roof solar panel (6 units. INSOL20), 750 l boiler (WSS750), 

insulation 120 mm (BDP750), pump unit (RGP1862), 

expansion tank 50 l (ADG50), electrical current control unit (ESR21S) 

Wolfgang and 30 l antifreeze (FSK), sheet metal covering (BEF) 5.390,00 

* See page 24 for technical details. 

Installation price on request 

Piping material has to be ordered seperately (see page 33) 

6 www.sol-ution.com 

SOLARSET SOLIST 

NEW Kompakta 

with air vent 

and flowmeter 

Kompakta 

with built in pump unit, 

electrical control unit, 

expansion tank and 

e-cartridge

UNISOL27 

On-roof water heating systems 

Standard solar panels system 

for all installation types 

Full-surface copper absorber 

Excellent heat output 

and durable design 

Collector installation in 

accordance with personal specifications 

SOLution SOLAR KIT JUBILÄUM ON-ROOF (excl. installation) 

Solar system components with kit for connecting corrugated tubes (WSA 18) 

SOLar energy system for water heating for 2 - 4 people 

KPU300 5,4 m 2 Standard solar panels (UNISOL27 or UNISOL27L), 

300 l boiler (WSE300), pump unit (RGP1862), expansion 

tank 25 l (ADG25), electrical current control unit (ESR21S) 

Leopold and 20 l antifreeze (FSK), on-roof installation 2.870,00 

NEW Kompakta 

with air vent 

and flowmeter 

KPU300K like Leopold 

Rudolf (instead of WSE300 with Kompakta*) 3.090,00 


KPU400 8,1 m 2 Standard solar panels (UNISOL27 UNISOL27L), 



Julius and 20 l antifreeze (FSK), on-roof installation 3.710,00 





Theodor and 20 l antifreeze (FSK), on-roof installation 3.890,00 

NEW Kompakta 

with air vent 

and flowmeter 

KPU500K like Theodor 

Thomas (instead of WSE500 with Kompakta*) 4.190,00 





Bruno and 20 l antifreeze (FSK), on-roof installation 4.610,00 



750 l boiler (WSS750), insulation 120 mm (BDP750), 


electrical current control unit (ESR21S) and 30 l antifreeze (FSK), 

Fred on-roof installation 5.470,00 

* See page 24 for technical details 

For prices of installation of solar panels see page 21 

Piping material has to be ordered seperately see page 35. 

Prices in Euro, VAT excl. 

SOLARSET JUBILÄUM 

WARMWATER 

SETPRICES 

SOLARES HEIZEN 

SETPREISE 

SOLARES KÜHLEN 

SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 

SOLARKREIS PUFFERSPEICHER 

KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 

PHOTOVOLTAIK SCHWIMMBAD SOLARLEITUNGEN 

ZUBEHÖR 

PELLETS- 

KAMINÖFEN

INSOL 

In-roof water heating systems 

SOLution SOLAR ENERGY SYSTEM SPEZIALIST IN-ROOF 

incl. mounting of solar panels and sheet metal covering 

8 

In-roof large scale panels 

Same price irrespective of roof type 

Simplified calculation 

thanks to pre-fabricated systems 

System includes mounting of solar panels 

and sheet metal covering with the 

exception of any external roof works 

Top-quality aluminium sheeting of your choice 

The „Spezialistenlösung“ contains modular solar panels which are 

adapted to each individual household. 


KPI300M 6 m 2 In-roof solar panels (INSOL32) incl. installation, 



Andrea and 20 l antifreeze (FSK), sheet metal covering (BEF) 4.040,00 

KPI300MK wie Andrea 

Herbert (instead of WSE300 with Kompakta*) 4.350,00 





Gabor and 20 l antifreeze (FSK), sheet metal covering (BEF) 4.790,00 





Eva and 20 l antifreeze (FSK), sheet metal covering (BEF) 4.990,00 

KPI500MK wie Eva 

Cindy (instead of WSE500 with Kompakta*) 5.190,00 


KPI500M1 10 m 2 In-roof solar panels (INSOL52) incl. installation, 



Herwig and 20 l antifreeze (FSK), sheet metal covering (BEF) 5.610,00 


KPI750M 12 m 2 In-roof solar panels (2 units INSOL32) incl. installation, 



electrical current control unit (ESR21S) und 30 l antifreeze (FSK), 

Yann sheet metal covering (BEF) 6.590,00 

Price of system 

includes mounting 

NEW Kompakta 

with air vent 

and flowmeter 

NEW Kompakta 

with air vent 

and flowmeter 

* See page 24 for technical details. Please use our “Crane Installtion” order form to place your order! 

For roofing prices (tiling removal and replacement) see page 18 

Piping material must be ordered seperataley (see page 33) 


pipework 

with waterantifreezecompound 

hot water tank 

expansion tank 

SOLARSET 

SPEZIALIST 

solar panel 

current control 

unit 

antifreeze 

pump unit

UNISOL 

On-roof water heating systems 

Large scale panels completely assembled 

for on-roof use or on-site delivery 

Modular system compatible with existing 

Installations 

Price incl. mounting 

NEW 

SOLution SOLAR ENERGY SYSTEM SPEZIALIST ON-ROOF 

incl. mounting of solar panels and assembly 

Price of system 

includes mounting 

The UNISOL cc is a modular system which is assembled on the roof 

or on the ground. 


KPU300M 6,3 m 2 Aluminium-solar panels (UNISOL60 cc) incl. mounting, 

300 l boiler (WSE300), pump unit (RGP1862), expansion tank 

25 l (ADG25), electrical current control unit (ESR21S) and 20 l 

Peter antifreeze (FSK), mountings for on-roof installation 4.050,00 

NEW Kompakta 

with air vent 

and flowmeter 

KPU300MK like Peter 

Karl (instead of WSE300 with Kompakta*) 4.350,00 



400 l boiler (WSE400), pump unit(RGP1862), expansion tank 


Ralf antifreeze (FSK), mountings for on-roof installation 4.700,00 



500 l boiler(WSE500), pump unit (RGP1862), expansion tank 


Helmut antifreeze (FSK), mountings for on-roof installation 5.150,00 

NEW Kompakta 

with air vent 

and flowmeter 

KPU500MK like Helmut 

Bert (instead of WSE500 with Kompakta*) 5.300,00 


KPU500M1 10,5 m 2 Aluminium-solar panels (UNISOL100 cc) incl. mounting, 

500 l boiler (WSE500), pump unit (RGP1862), expansion tank 


Heinz antifreeze (FSK), mountings for on-roof installation 5.750,00 


KPU750M 12,6 m 2 Aluminium-solar panels (UNISOL cc) incl. mounting, 



electrical current control unit (ESR21S) und 30 l antifreeze (FSK), 

Oliver on-roof installation 7.100,00 

Water heating above 70% covering rate: 1,5 - 2 m 2 collector panel 

surface area per person. Optimal roof pitch is 20 to 50 degrees 

Optimal direction is Southeast-Southwest. High deviations 

should be compensated by a larger collector panel suface area 

* See page 24 for technical details 


WARMWATER 

SETPRICES 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

10 

Compact solution 

Heating with solar energy 

The compact solution offers complete sets for room and water heating. These sets consist of 

high quality and space-saving components; for example the combi-storage tank, which is a 

boiler and a storage tank in one and is offered with a number of different elements. 

Standardised and high quality systems for the storage of 

hot water and for water heating 

All sets include mounting of solar panels, sheet metal covering 

and mountings 

Systems are suitable for 

in-roof and on-roof 

installation 

Compatible components 

solar panels 

principle scheme 

heating 

storage tank 

hot water 

boiler 

cold water 

The SOLution 

COMPACT-solution 

is a sophisticated 

solar heating 

system. The 

combi-storage 

tank is easy to 

install, yields great 

heat output and 

is also very space 

saving. 


The SOLution 

COMPACT-solution 

helps you to save 

solar energy for hot 

water and heating 

in one storage tank.

Optimal solar recharging through two 

big plain ended tubes 

High degree of drinking water hygiene 

thanks to throughput principle 

Long-term heat conservation thanks to 

precise layer loading 

SOLution COMPACT ENERGY SYSTEM GROSSE EROBERER IN-ROOF 

including mounting of solar panels 

Solar energy system for solar water heating and room heating consisting 

of: solar panels and sheet metal covering including installation, 

combi-storage tank and solar circuit components. 

CSI500M Compact energy system with 10 m 2 in-roof 6.350,00 

solar panels (INSOL52) incl. sheet metal covering, 

combi-storage tank KSS500 with storage unit WRB50 

incl. insulation, recirculation group RGP1862, 

electrical current control unit ESR21S, 

Robert expansion tank ADG 33, 30 l antifreeze FSK 

CSI1000M Compact energy system with 16 m 2 in-roof 8.925,00 

solar panels (2 units INSOL42) incl. sheet metal covering, 

assembled on top of each other, 

combi-storage tank KSS1000 with storage unit WRB50 


electrical current control unit UVR63S, 

expansion tank ADG 50, 40 l antifreeze FSK, 

Toni reversing valve MSV25 for layer reloading 

SOLution COMPACT ENERGY SYSTEM GROSSE EROBERER ON-ROOF 

including mounting of solar panels 

Solar energy system for solar water heating and room heating 

consisting of: solar panels and sheet metal covering incl. installation, 

combi-storage tank and solar circuit components. 

CSU500M Compact energy system with 10,5 m 2 6.410,00 

aluminium large-format solar panels (UNISOL100 cc) 

incl. mountings, combi-storage tank KSS500 with storage 

unit WRB50 incl. insulation, recirculation group RGP1862, 


Craig expansion tank ADG 33, 30 l antifreeze FSK 

CSU1000M Compact energy system with 16,8 m 2 9.410,00 

aluminium large-format solar panels (2 units UNISOL80 cc) 

incl. mountings, combi-storage tank KSS1000 with storage 

unit WRB50 incl. insulation, recirculation group RGP2262, 

electrical current control unit UVR63S, 

expansion tank ADG 50, 

40 l antifreeze FSK, 

Hannibal reversing valve (MSV25) for layer reloading 


COMPACTSET 

GROSSE EROBERER 

WARMWASSER 

SETPREISE 

SOLAR HEATING 

SETPRICES 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

12 

The SOLution Wellness solution 

makes it possible to store the 

solar energy for hot water and 

heating in one storage tank. The 

water is heated by a plate-type 

heat exchanger based on the 

throughput principle. 

solar panels 

Wellness solution 

Wellness with solar energy 

heating 

boiler 

buffer loading storage tank 

fresh water 


heating 

hot water 

cold water 


The buffer loading can 

be carried out through 

an external plate-type 

heat exchanger or an 

inlaying plain ended 

pipe heat exchanger.

Fresh water preparation 

Hygienic hot water 

Quick installation using pre-fabricated units 

Optimal solar utilization thanks to high 

storage temperatures 

SOLution WELLNESSSET SONNENKÖNIG IN-ROOF 

incl. mounting of solar panels 


consisting of: solar panels and sheet metal covering buffer storage 

incl. installation, solar circuit components, including fresh water units 

for hygienic water heating based on the troughput principle. 

WSI800M Wellness energy system with 12 m 2 in-roof 6.990,00 

solar panels (2 units INSOL32) incl. sheet metal covering, 

buffer storage HPR800 incl. insulation, 

recirculation group RGP1862, electrical current control ESR21S, 



Andreas 1 fresh water unit FRE30 

WSI1000M Wellness energy system with 16 m 2 in-roof 9.790,00 

solar panels (2 units INSOL42) incl. Sheet metal covering, 

Buffer storage HPR1000 incl. insulation, 

recirculation group RGP2262, eletrical current control ESR21S, 



Andreas 2 fresh water unit FRE30 

SOLution WELLNESSSET SONNENKÖNIG ON-ROOF 



consisting of: solar panels and mounting buffer storage 

incl. installation, solar circuit components, including fresh water units 

for hygienic water heating based on the throughput principle. 

WSU800M Wellness energy system with 10,5 m 2 6.800,00 

aluminium large format solar panels (UNISOL100 cc) 

incl. sheet metal covering, buffer storage HPR800 




Sigi 1 Fresh water unit FRE30 

WSU1000M Wellness energy system with 16,8 m 2 9.430,00 

aluminium large format solar panels (2 units UNISOL80 cc) 

incl. sheet metal covering, buffer storage HPR1000 




Sigi 2 Fresh water unit FRE30 


WELLNESSSET 

SONNENKÖNIG 

photo: Architekt Moser 

solar panels 

heating 

storage tank 

Scheme for wellness solution 

FRE30 

boiler 

fresh water 

heating 

hot water 

cold water 

WARMWASSER 

SETPREISE 

SOLAR HEATING 

SETPRICES 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

14 

Alaska solution 

Heating and cooling with solar energy 

The energy demand in the field of cooling and air-condition is constantly rising. In order to 

keep energy costs for air-conditioning low, the solar cooling system is the perfect choice. 

The solar cooling system stores the surplus of energy in the summer and converts this 

energy into cooling energy through absorbers. The same solar system supplies hot water 

and heat during the winter. Therefore the factor of efficiency is tremendous as one system 

can be used for the different needs throughout the year. 

Highly efficient solar technology 

Solar panels 

Layer loading 


Heat storage tank 

Boiler 

Heating 

www.solarkuehlung.at 

Cooling 

storage tank

Cooling, heating and hot water, 

one system for all! 

Maximal use of solar energy 

Air conditioning in summer and heating in winter 

Air conditioning without energy costs 

Come and visit our demonstration plant 

in our head quarter! 

SOLution Alaska solution for solar cooling and solar heating 

Set consisting of solar panels, fixing equipment, primary and 

secondary solar circuit components for layer loading, recirculation 

group, expansion tank, antifreeze and external plate-type heat 

exchanger. Buffer storage system consists of heating buffer and 

cooling buffer incl. insulation. Absorbing cooling machine including 

the proper cooling tower (open construction). Freely programmable 

control. 

Costs of installation are not included. 

AL1540M Alaska solution for a cooling load of 15kW 36.760,00 * 

Absorbing cooling machine 15kW 

Cooling tower (open construction) 35kW 

Flat solar panels 40m 2 

Heating buffer storage tank 2.000 l 

Alaska cooling buffer storage tank 1.000 l 






Polarfuchs cooling buffer storage tank 2.000 l 






Eisbär cooling buffer storage tank 3.000 l 

* € 500,00 (orientation price) for preparation of offer. 

Costs are discounted in case of purchase. 

Installation prices on request. 

Piping material has to be ordered separately. 


WARMWASSER 

SETPREISE 


SETPREISE 

SOLAR COOLING 

SETPRICES 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

16 

INSOL 

In-roof solar panels using crane installation 

Height Width overall surface aperture Absorber weight water content glass panels 

mm mm area / m2 area / m2 area / m2 kg l pieces 

INSOL 11 1060 1013 1,07 0,92 0,90 24 0,50 1 x 1 m2 glass 

INSOL 20 2030 1013 2,06 1,85 1,83 44 0,90 1 x 2 m2 glass 

INSOL 22 2030 2026 4,11 3,71 3,69 90 1,94 2 x 2 m2 glass 

INSOL 32 2030 3016 6,12 5,56 5,59 134 2,54 3 x 2 m2 glass 

INSOL 42 2030 4012 8,14 7,41 7,49 177 3,15 4 x 2 m2 glass 

INSOL 52 2030 5005 10,16 9,27 9,39 223 3,76 5 x 2 m2 glass 

INSOL 21 1060 2026 2,15 1,84 1,,80 50 1,62 2 x 1 m2 glass 

INSOL 31 1060 3016 3,20 2,76 2,70 75 2,43 3 x 1 m2 glass 

INSOL 41 1060 4012 4,25 3,68 3,60 100 3,24 4 x 1 m2 glass 

INSOL 51 1060 5005 5,31 4,60 4,50 125 4,05 5 x 1 m2 glass 

SOLution SHEET METAL COVERING 

Aluminium sheeting as rainproof temporary solution for roof covering, 

available in anthracite (red and other colours on request). Price per 

linear meter is circumferentially calculated. 

Example: INSOL 52: 5 x 2 m ➞ 14 linear meter sheet metal. 

COVERING FOR ROOFS WITH PITCH OVER 27° 

BEFZ sheet metal covering - tiled roof >27° per lm 37,00 

BEFS sheet metal covering - shingle roof >27° per lm 30,50 

BEFB sheet metal covering 

plain tile roof, double covering > 27° per lm 32,50 

BUK1 1 m long shims for upper sheet metal covering 6,00 

BUK2 2 m long shims for upper sheet metal covering 12,00 

COVERING FOR ROOFS WITH PITCH UNDER 27° 

BEFZ 27 sheet metal covering - tiled roof

SOLution IN-ROOF SOLAR PANELS 

Highly selective, vacuum coated full surface absorber (Sunselect), 

solar panel frames made of wood, high temperature resistant 

rockwool insulation, hail resistant solar glass covering, solar panels 

can be put side by side and one upon the other. Suitable for roof 

pitch >20°, two rows if roof pitch is >27° 

STANDARD MODULES (mounting without crane is possible) 

connections for inward and outward flow on top (CU 18) 

INSOL 11 in-roof solar panel 1 m2 (1 m x 1 m) 313,00 

INSOL 20 in-roof solar panel 2 m2 (1 m x 2 m) 488,00 

INSOL VS Screw connection kit CU 18 in angular design, 

including support sleeves and CU pipe, for connection 

of two solar panels, price per solar panel 

17,50 

CRANE MODULES (width x 2m height) 

connections for inward and outward flow on the right or on the left (CU 18) 

INSOL 22 crane solar panel 4 m2 (2 m x 2 m)* 1.128,00 

INSOL 32 crane solar panel 6 m2 (3 m x 2 m) 1.640,00 



INSOL 21 crane solar panel 2 m2 (2 m x 1 m)** 638,00 

INSOL 31 crane solar panel 3 m2 (3 m x 1 m)** 977,00 

INSOL 41 crane solar panel 4 m2 (4 m x 1 m)** 1.270,00 

INSOL 51 crane solar panel 5 m2 (5 m x 1 m)** 1.590,00 

* consists of 2 INSOL 20 panels 

** consists of 2-5 INSOL 11 panels 

For installation via crane see pages 18-19 

Interconnection: INSOL 11 

Interconnection: INSOL 32 - 52 

Example of possible combinations: 

Consisting of: 

1 INSOL 42 and 1 INSOL 31 

Interconnection: INSOL 20 

RL sensor VL 

RL sensor 

VL VL 

RL RL 

3 m 

4 m 

3 m 

2 m 

VL 


WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

IN-ROOF 

SOLARPANELS 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

18 

4 m 

INSOL 

Montage 

Take advantage of the benefits 

offered by installation by SOLution 

Reliability of cost calculations 

Quick and prompt module 

installation 

6 m 

For a professional and 

prompt installation by 

crane I need your 

completed special 

“Crane Installation” form 

Andrea Ecklbauer 

Cranescheduling 

andrea.ecklbauer@sol-ution.com 

Tel: +43 (0) 7244/20 280-14 

4 m 

5 m 

1 m 

2 m 

Examples of cost calculations: 

This is an example of how to calculate the costs for 

installation of the sheet metal covering or rather those 

for the removal and replacement of the roof tiles. 

In Example: 22 running meter 

Mounting of sheet metal covering for tiled roof: 

12 x 22 = 264,00 Euro 

Roofing of tiled roof: 

(11 x 22) + (22 x 22) = 726,00 Euro 

See pages 2 - 3 for an overview 

of crane areas. 


Please order the specific sheet 

metal covering for roof pitches 

between 20° and 27°! 

For roof pitches under 20° 

on-roof solar panels must be 

used. 

Make sure to use our special 

“Crane Installation” form

SOLution ROOFING WORK: REMOVAL OF ROOF TILES 

SOLution can undertake the task of removing roof tiles. Price per 

linear meter is circumferentially calculated (solar panels area). 

SMK AZ Removal of roof tiles on a tiled roof 

(removing of roof tiles) 

per lm 11,00 

SMK AS Removal of roof tiles on a shingle roof 

(simple rhombus shingle roof covering) 

or plain tile roof covering 

per lm 19,50 

SMK AD Removal of roof tiles on shingle covering 

(double covering) or slate tile covering 

per lm 33,50 

CRANE INSTALLATION PRICES OF SOLution IN-ROOF SOLAR PANELS 

We assemble the on-roof solar panels for you. inflow and return tubes 

and the brass immersion sleeve for the sensor are placed under your 

roof. Any gaps created in the roof structure are fitted with plates for 

draining off water. 

SMK 1 Mounting of INSOL-solar panels including pressure test 410,00 

and travelling costs of SOLution installation team 

SMK 2 Mounting of every further module (see third picture 150,00 

on the right), including solar panels delivery, module installation, 

pressure test of solar panels area, laying of inflow and return 

tubes under roof. Additional piping is not included in the price! 

Please make sure that the access road for the crane-lorry is 

wide enough! Narrow alleys and bridges must be taken into 

consideration (lorry width: 2.5 m, lorry height: 4 m)! 

MOUNTING OF SHEET METAL COVERING BY SOLution 

The sheet metal covering including the shims are professionally 

mounted on the roof. Price per linear meter is circumferentially 

calculated (solar panels area). 

SMK BL Mounting of sheet metal covering per lm 12,00 

SOLution ROOFING WORK: TILING 

SOLution can undertake the task of removing tiles from your roof. The 

price per linear meter is circumferentially calculated (solar panels area). 

SMK ZZ Tiling of a tiled roof (removing of roof tiles) per lm 22,00 

SMK ZS Tiling of shingle roof 

(simple rhombus shingle roof covering) 

or plain tile roof covering 

per lm 28,00 

SMK ZD Tiling of shingle covering 

(double covering) or slate tile covering 

per lm 50,50 

SOLution PIPING 

Installation of tubes under the roof (per running meter), including 

material. Price depending on actual work and material consumption. 

SMK R Price indication for piping per lm 48,00 


WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

IN-ROOF 

SOLARPANELS 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

20 

UNISOL 27 and UNISOL 

Universal panel and large-scale panel 

Universal installation 

Weather-proof modules 

Full surface copper absorber 

Excellent heat output and 

timeless design 

Mounting possible without 

using a crane 

Version height width overall surface aperture absorber weight water content 

mm mm plain / m2 plain / m2 plain / m2 kg l 

UNISOL 27 standing frame 2136 1246 2,7 2,57 2,50 47 1,23 

UNISOL 27L lying frame 1246 2136 2,7 2,57 2,50 47 1,24 

UNISOL 60 cc standing frame 1991 3090 6,3 5,85 5,73 117 2,76 



Interconnection: 

max. 6 solar panels standing in line 

max. 4 solar panels lying in line 

VL 

Sensor 

Cross section of solar panels: 

Glass cover 

Insulation 

RL 

RL 

lying standing 

Absorber 

VL 

Sensor 

SOLution UNIVERSAL SOLAR PANELS 

INSTALLATION ACCESSORIES 

RDD Laying of tubes under roof covering 

up to 35mm, EPDM dry sealing frame, 

suitable for every roof covering thanks 

to silicon adherent area 

26,00 

WSA 18 Connecting kit for corrugated tubes, 

insulated, 2 tubes, each 1 m long, 

olive type tube fitting 

for CU 18mm 

84,50 

BFT Concrete pre-fabricated parts (BFT) 

for mounting of solar panels onto 

flat roofs; Depending on roof height 

and solar panels pitch 1 BFT is 

usually sufficient for approx 2m 

85,50 

2 . 

Weight per element 180 kg, 

price excl. aluminium mountings 


BFT 

RDD 

WSA

NEW 

SOLution UNIVERSAL and LARGE-SCALE PANELS 

All-purpose solar panels for each installation site, 

full surface copper absorber with high selective vacuum coating 

(Sunselect), covering bar profiles anodised in white aluminium, 

also suitable for big solar energy systems, min. pitch 15°, 

price per solar solar panel 

UNIVERSAL SOLAR PANELS IN FRAME PROFILE DESIGN 

UNISOL 27 solar panel 2,7 m2 (2136 x 1246 mm) standing 710,00 

UNISOL 27L solar panel 2,7 m2 (1246 x 2136 mm) lying 710,00 

UNISOL 60 cc aluminium module 6,3 m2 standing 1.840,00 



SOLution UNIVERSAL PANELS – SET OF FIXING EQUIPMENT 

Set of fixing equipment in aluminium for all installation types, easy to 

assemble, suitable for several roof types, price per m 2 of solar panels area. 

HANGER BOLT INSTALLATION FOR CEMENT ASBESTORS AND PLAIN TILE ROOFS 

Minimum width of rafter 80 mm. 

SSB 0 Hanger bolt installation PARALLEL per m2 33,00 

SSB 20 Hanger bolt installation 20° RAISED per m2 43,50 

SSB 45 Hanger bolt installation 45° RAISED per m2 45,50 

ROOF HOOK INSTALLATION FOR TILED ROOFS 

DBB 0 Roof hook installation PARALLEL per m2 33,00 

DBB 20 Roof hook installation 20° RAISED per m2 48,50 

DBB 45 Roof hook installation 45° RAISED per m2 51,00 

CREASE CLAMP INSTALLATION FOR ZINC COATED TIN ROOFS 

Crease direction along solar panels’ direction 

(for crease clamps in stainless steel, copper or alumiunium 

add on 10% to price!) 

FKB 0 tin roof installation PARALLEL per m2 35,00 

FKB 20 tin roof installation 20° RAISED per m2 45,00 

FKB 45 tin roof installation 45° RAISED per m2 48,00 

SOLution UNIVERSAL PANELS INSTALLATION PRICES 

SUK 1 on-roof installation of initial solar panels, parallel, 410,00 

raised by 20° or 45° and travelling costs of installation team 

SUK 2 mounting of every further module 95,00 

SUK 1 cc on-roof installation of initial solar panels, parallel, 515,00 

raised by 20° or 45° and travelling costs of installation team 

SUK 2 cc mounting of every further module 150,00 

SUK D Fitting of flow and return pipes 

through roof covering, including piping material 

and 2 EPDM dry sealing frames 

or corrugated tube if tile ventilator is available 

208,00 

SUK R PRICE INDICATION for on-roof piping work 

including material (price/linear meter), 

without insulation. Price depending on actual work! 

48,00 

MONTBFT Moving of a concrete pre-fabricated part (BFT) 21,00 


WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

ON-ROOF 

SOLARPANELS 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

SOLution VAKUSOL VACUUM SOLAR PANELS 

Complete preassembled unit of vacuum tubes. CPC-mirrors as reflectors for 

optimal use of the sun. Connections on the left and on the right (CU 15mm), 

minimum pitch 15°, price per solar panel. 

VAKUSOL 18 vacuum tube solar panel 3,4m2 with 18 tubes 2.048,00 

SCPC1000 high temperature sensor for VAKUSOL 

PT1000 characteristics 

32,00 

WSA 15 Connecting kit for corrugated tubes, insulated 

2 tubes with each 1 m long, 

olive type tube fitting for CU18 

81,00 

SOLution EXCLUSIVE IN-ROOF SYSTEMS 

Wooden solar panels frame 

DELIVERED eight weeks after written plan confirmation1 , prices per m2 INSOL 30 in-roof solar panel 3,2 m2 3016 x 1060 mm 

310,00 

INSOL S1 in-roof solar panels for crane installation, 

special format with square outer edges 

550,00 

INSOL S2 in-roof solar panels for crane installation, 

special format with bevelled outer edges 

640,00 

INSOL RAL Coating of all visible profiles in any 

RAL-colour of your choice 

130,00 

22 

Vacuum tube, facade 

and exclusive 

solar panels 

height width overall surface aperture absorber weight water- nomber of 

mm mm area / m 2 area / m 2 area / m 2 kg content l tubes 

VAKUSOL 18 1640 2080 3,41 3,0 3,0 54 2,4 18 

SOLution EXCLUSIVE ON-ROOF SYSTEMS 

All purpose solar panels made of weather-proof aluminium 

DELIVERED eight weeks after written plan confirmation2 , prices per m2 UNISOL S1 aluminium large-scale solar panels 

special format with bevelled outer edges 

on request 

UNISOL RAL coating of all visible profiles in any 


on request 

SOLution SOLAR FACADE SOLAR PANELS SYSTEMS 

Solar facade solar panels in wooden frame design 

DELIVERED eight weeks after written plan confirmation1 , prices per m2 Fasol S Solar facade solar panels standard format (2 m x 1 m) 530,00 

Fasol S1 Solar facade solar panels 

special form with square and edges 

750,00 

Fasol S2 Solar facade solar panels 

special form with bevelled outer edges 

980,00 

Fasol RAL coating of all visible profiles 


130,00 

1 minimum 10 m 2 . 2 minimum 20 m 2 . 

For prices of mountings and installation see page 21. 

www.sol-ution.com

Hot water 

storage tank 

Corrosion and age resistant thanks 

to premium 2 coat enamel 

Additional surface protection through 

protection anode with integrated anode tester 

External current anode for big storage tanks 

Baffle plate for optimal storage layering 

SOLution HOT WATER STORAGE TANK 

SOLution solar hot water tanks providing high performance benefits for solar 

hot water heating are made of premium steel. They are 2 coat vacuumenamelled 

and equipped with a magnesium anode including optical anode 

tester. CFC-free rigid expanded PU foam insulation is fixed in position and 

guarantees excellent insulation, flange 180 mm (according to DIN4753). 

WSE300 water content: 300 l, diameter: 650 mm, height: 1530 mm * 982,00 

WSE400 water content: 400 l, diameter: 700 mm, height: 1678 mm * 1.130,00 

WSE500 water content: 500 l, diameter: 800 mm, height: 1580 mm * 1.335,00 

Hot water storage tank, sinterflon enamelled with 2 plain ended tubes for heat 

transfer incl. external current anode, insulation must be ordered separately 

WSS750 water content: 750 l, diameter: 750 mm, height: 1925 mm 1.352,00 

BDP750 120 mm soft foam insulation with hard polystyrol shell 490,00 

WSS1000 water content: 1000 l, diameter: 790 mm, height: 2045 mm 1.584,00 

BDP1000 120 mm soft foam insulation with hard polystyrol shell 520,00 

SOLution BOILER ACCESSORIES 

BGR20 boiler safety group 3/4“ 101,00 

BGR25 boiler safety group 1“ 108,00 

BWM hot water mixer 3/4“ 120,00 

water height external container weight A solar out- circulation 

content mm diameter diameter kg mm ward flow D 

l mm mm B mm mm 

WSE300 288 1530 650 550 135 77 305 984 

WSE400 380 1678 700 600 161 35 281 661 

WSE500 487 1580 800 700 193 77 223 695 

WSS750 750 1925 990 750 230 173 270 1168 

WSS1000 1000 2045 1030 790 270 235 320 1020 

inward outward inward WW solar heating flange 

flow flow flow I register register 180 mm 

E mm F mm H mm mm m2 I m2 I Ø 

WSE300 789 884 1192 1435 1,45 9,5 0,93 6,1 305 

WSE400 761 856 1120 1583 1,64 10,5 0,85 5,7 281 

WSE500 795 880 1276 1489 2,17 14 1,63 10,5 293 

WSS750 968 1360 1658 1743 2,4 16 1,2 8 340 

WSS1000 1160 1260 1740 1805 4,2 20 2,4 16 390 

* On request availabel with 70 mm insulation. 


BGR 

WSE 300-500 

WSS 750-1000 

WSE 300-500 

Cylinder sizing: 

Boiler Persons m2 WSE300 4 6 

WSE400 5 8 

WSE500 6 10 

WSS750 8 12 

WSS1000 11 16 

BWM 

Please note: The sleeve „D“ of the WSS 1000 is 

placed under the coil “E” 

WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

Kompakta 

Kompakta solar system for hot water heating 

Combi-storage tank including pump, electrical 

current control unit and expansion tank 

It reduces installation time thanks to 

pre-assembled components 

Prepared electrical connection 

Plug & Play 

SOLution KOMPAKTA COMBI-STORAGE TANK 

including solar circuit components 

NEW Kompakta 

with aspirator 

and flowmeter 

Solar hot water tanks, 2 coat vacuum-enamelled and equipped with a solar 

pump, expansion tank and electrical current control unit (integrated in the 

upper storage area), magnesium protection anode and e-cartridge. CFC-free 

rigid expanded PU foam insulation is fixed in position. The electrical current 

control unit is connected via plugs. 

KOMPAKTA-300 Combi-storage tank: water content 300l, 

diameter 700 mm, height 1610 mm 1.738,00 

KOMPAKTA-500 Combi-storage tank: water content 500l 

diameter 800 mm, height 1850 mm 1.948,00 

See page 6 - 9 for 

complete systems. 

water height diameter diameter weight cold water refill valve circulation plug 

content H D2 D1 A B C D 

l mm mm mm kg mm mm mm mm 

KOMPAKTA-300 289 1610 700 600 205 77 323 593 763 

KOMPAKTA-500 487 1850 800 700 267 77 223 695 795 

height dimension heat exchanger heat exchanger 

outward inward hot water in- outward flange E-heating bottom top 

flow flow G flow solar S M N heating water heating water 

E mm F mm mm mm kg mm surface m2 content l surface m2 content l 

KOMPAKTA-300 848 1112 1289 1514 323 805 1,45 9,5 0,85 5,7 

KOMPAKTA-500 880 1276 1489 1714 293 838 2,17 14 1,63 10,5 


Kompakta 300-500 

Solar system pressure 

at compacta systems: 

max. 3.0 bar!

Buffer storage tank 

SOLution BUFFER STORAGE TANK 

SOLution buffer storage tanks are made of 4 mm thick sheet steel 

DIN 4753, inside black and also available with a shrink-wrapped plain 

ended pipe. 

All 6/4 connections are equipped with baffle plates in order to maintain 

the storage layering. 

HEATING BUFFER WITH COIL: 

HPR800 water content 800 l, Ø 790 mm, height 1700 mm 688,00 

HPR1000 water content 1000 l, Ø 790 mm, height 2050 mm 788,00 

HPR1500 water content 1500 l, Ø 1000 mm, height 2150 mm 1.174,00 

HEATING BUFFER WITHOUT COIL: 

HPS800 Technical data like HPR800 but without coil 497,00 



HPS2000 water content 2000 l, height: 2380 mm, 

tilted height: 2440 mm, diameter: 1100 mm 

1.150,00 

Bigger buffer storage tanks and special dimensions on request! If you have 

got bigger buffer storage tanks, heating water supplements must be used! 

SOLution BUFFER STORAGE TANK - INSULATION 120 mm 

CFC-free soft foam insulation, 120 mm thick, outer jacket made of 

hard polystyrol (red colored) 

PDP800 for HPS800 and HPR800 120 mm 448,00 



PDP2000 for HPS2000 160 mm grey 641,00 

PDPZU Buffer connection kit: pipe nipple, reduction, plug 34,40 

PUV buffer connection tube 6/4" 71,00 

Buffer storage insulation up to 200 mm on demand 

A B C D E F G I M tilted height weight register 

mm mm mm mm mm mm mm mm mm mm kg m2 HPR800 260 630 1030 1430 260 1700 790 1030 930 1740 141 2,4 

HPR1000 310 745 1250 1710 310 2050 790 1030 1030 2100 156 3 

HPR1500 372 817 1342 1752 372 2150 1000 1240 1172 2215 185 3,6 

A B C D F G I tilted height weight 

mm mm mm mm mm mm mm mm kg 

HPS800 260 630 1030 1430 1700 790 1030 1740 141 

HPS1000 310 745 1250 1710 2050 790 1030 2100 156 

HPS1500 372 817 1342 1752 2150 1000 1240 2215 185 

HPS2000 317 900 1490 2020 2380 1100 1340 2440 211 


120 mm insulation 

PUV 

WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 

SOLARKREIS BUFFERSTORAGE 

KOMBISTORAGE 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

26 

Combi-storage tank KSS 

Optimal storage loading 

High degree of drinking and water hygiene 

Long-term heat conservation 

SOLution COMBI-STORAGE TANK 

In the SOLution combi-storage tank the solar energy is stratified through 

2 separated straight-tube heat exchangers. 3 different storage units 

can be integrated optionally: 200 l enamel, 200 l stainless steel 

or tube bundles. 

KSS500 Combi-storage tank 500 l with 2 coils 864,00 

KSS5001 Combi-storage tank 500 l without coil 649,00 

KSS700 Combi-storage tank 700 l with 2 coils 966,00 


KSS900 Combi-storage tank 900 l with 2 coils 1.092,00 







KSS12001 Combi-storage tank 1200 l without coil 1.015,00 













solar panels 



heating 

storage tank 

KSS 500-2200 

hot water 

boiler 

cold water

Combi-storage tank 

H2 H1 tilted height D1 D2 heating surface weight 

mm mm mm mm mm m2 kg 

KSS500 1925 1895 1905 600 760 2 x 1,6 145 

KSS700 1935 1905 1925 700 860 2 x 2,0 175 

KSS900 2010 1955 1985 790 990 2 x 2,4 205 

KSS1000 2180 2125 2150 790 990 2 x 2,6 225 

KSS1100 2420 2365 2410 790 990 2 x 2,8 245 

KSS1200 1990 1935 1980 900 1100 2 x 2,9 235 

KSS1350 2220 2165 2200 900 1100 2 x 3,1 260 

KSS1500 2420 2365 2390 900 1100 2 x 3,3 285 

KSS1650 2220 2165 2210 1000 1200 2 x 3,3 285 

KSS1800 2420 2365 2400 1000 1200 2 x 3,6 320 

KSS2000 2220 2165 2220 1100 1300 2 x 3,6 350 

KSS2200 2420 2365 2410 1100 1300 2 x 4,0 380 

STORAGE INSULATION FOR COMBI-STORAGE TANK 

Storage insulation made of PU soft foam 

KSSI500 Storage insulation 80 mm 405,00 








Storage insulation made of PU hard foam 





STORAGE UNITS FOR HOT WATER HEATING 

STORAGE UNITS FOR COMBI-STORAGE TANK 

including flange and screws 

WEE200 Enamelled storage units for hot water heating, 

water content: 200 l, including magnesium anode 

655,00 

WEN200 Stainless steel storage units for hot water heating, 

water content: 200 l 

1.211,00 

WRB50 Stainless steel pipe bundle for hygienic 

hot water heating, water content: 50 l 

1.244,00 

WRB50Z Stainless steel pipe bundle for hygienic 

hot water heating, water content: 50 l 

with circulation connection 

1.320,00 

FPKSS blank flange 83,00 

SCREW-IN HEATER FOR COMBI-STORAGE TANK 

ELP KSS2 immersion 2kW, 6/4” thread, 216,00 

for KSS500 – KSS700, immersion length 170mm 

ELP KSS3 immersion 3kW, 6/4” thread, 230,00 

for KSS 900 – KSS 1500, immersion length, 230mm 


Heating water Warmwatertemperature 

output 

52° C 16,7 l/min 

55° C 21,0 l/min 

60° C 36,5 l/min 

cold water inflow: 10° C 

warm water outflow: 45° C 

ELP KSS2 

WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 

SOLARKREIS BUFFERSTORAGE 

KOMBISTORAGE 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

Control systems, antifreeze 

SOLution SOLAR ELECTRICAL CURRENT CONTROL UNITS 

SOLution solar control unit including sensor and immersion sleeve. 

Excess voltage protection at all inputs, suitable for semi-conductor and 

PT1000 sensors, adjustable follow up time for pumps and hysteresis, 

start function, PC interfaces, teleindication and relay module. 

Selectable system schemes, speed of pump is programmable. 

ESR21S Universal electrical current control unit 147,00 

3 inputs, 1 output including heat quantity count 

excl. volume current transmitter 

UVR63S standard three-circuit control 238,00 

6 inputs, 3 output (one of them is speed-controlled) 

heat meter included 

Volume current transmitter not included 

VSG1,5 volume current transmitter 86,00 

suitable for ESR21S and UVR63S 

UVR64S standard four-circuit control 354,00 

6 inputs, 4 output (two of them are speed-controlled) 

HZR65S standard heating control 377,00 

Regulation for solar energy system or secondary heating 

system with heating circuit controlled by atmospheric conditions 

UVR1611 Regulation for 2 solar circuits and 2 heating circuits 732,00 

which are controlled by atmospheric conditions 

16 inputs, 11 output (vier speed-controlled) 

inkl. sensor and brass immersion sleeve 

UVS232 IT interface for recording of control data 120,00 

KFS2 Collector sensor with 2 m long silicon wires 19,00 

SCPC1000 High temperature solar panels sensor PT1000 32,00 

BF Temperature sensor with 2 m long wires 13,00 

TH Brass immersion sleeve, messing, 40/60/90/140 mm 7,00 

SOLution ANTIFREEZE - PROPYLENGLYKOL 

FSK Antifreeze concetrate: 10 l bundle price per l 4,90 

Weather resistance when use of 40 % antifreeze - 21° C 

Propylenglykol 

FSV High temperature antifreeze mixture, price per l 4,00 

Weather resistance: - 28° C 

Ready mixed – DO NOT dilute the mixture! 

ESR21S 

UVR1611S 

UVS232 

UVR64S 


BF 

UVR63S 

HZR65S 

KFS2 

TH 

FSK FSV

Pump units, ADG 

SOLution PUMP UNITS 

Ready assembled pump units including gravity brake, safety 

installations, shut-off devices, thermometer, rinsing and loading 

equipment for solar energy systems up to 30 m 2 solar panels area. 

RGP1862 Two rope pumps with Wilo pump 20/6 320,00 

including breather route, gravity brake in inward flow 

and flow rate control 1-20 l/min, 

clamping ring connection CU18 

(for system from 1 to 16 m 2 ) 











PUMP UNIT INCLUDING GRAVITY BRAKE ABD SHUT-OFF DEVICES: 

PUE254 Pump unit with Wilo pump 25/4 ex. 160,00 

for secondary circuit in systems with plate-type heat exchanger 

PUE256 Pump unit with Wilo pump 25/6 für z.B.: 186,00 

Further solar circuits up to 24 m 2 

PUE257 Pump unit with Wilo pump 25/7 für z.B.: 220,00 

Further solar circuits up to 40 m 2 

ELI18 Insulated breather pot for piping CU18 65,00 

ELI22 Insulated breather pot for piping CU22 70,00 

SOLution EXPANSION TANKS 

ADG18 18 l, 3/4“ connection, 2,5 bar primary pressure 45,00 




stand container, solar connection on the side 

ADG80 80 l, 1“ connection, 2,5 bar primary pressure 179,00 






GAK coupler connection for container, fitting 3/4“ 15,00 

(solar suitable) 

flat plate ADG FSK 

solar panels 

4 m 2 18 10 l 

6 m 2 25 20 l 

8 - 10 m 2 33 20 l 

12 - 16 m 2 50 30 l 

18 - 30 m 2 80 30 l 

32 - 40 m 2 140 40 l 

4 m2 25 30 l 

6 - 8 m2 33 40 l 

10 - 12 m2 50 50 l 

14 - 16 m2 vacuum tube 

solar panels 

ADG FSKV 

80 70 l 

Dimensions apply to 30 rm CUR22 an 1 

piece plain ended pipe heat exchanger. 


PUE 

ADG 18-33 

ADG 50-80 

ADG 140-300 

RGP 

H 

Version available 

from May 2006 

ELI 

H 

Ø F 

Ø D 

Ø D 

Ø F 

Ø D 

GAK 

Ø D H h Ø F 

mm mm mm mm 

ADG18 280 370 – – 

ADG25 280 490 – – 

ADG33 354 460 – – 

ADG50 437 473 110 263 

ADG80 519 540 142 263 

ADG140 480 915 210 351 

ADG300 634 1085 235 485 

h 

H 

h 

WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 

SOLARCIRCLE PUFFERSPEICHER 

KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

Wellness solution 

the healthy shower 

SOLution FRESH WATER UNIT FRED 

SOLution LAYER LOADING UNIT ADELHEID 

30 

Fresh water heating 

Hygienic hot water thanks to heating which is 

ensured by the throughput principle 

Short installation time through pre-assembled units 

SOLution fresh water unit for hygienic hot water heating ensured by the 

throughput principle by means of plate-type heat exchanger and proportional 

controller. Pre-assembled hydraulic station including heat exchanger, control 

valve, pump, stainless steel tubes and stainless steel body, ready to plug in; 

Anti calcification guarantee 100°C/212F buffer temp., 50°C/122F WW tap temp. 

FRE30 Fresh water unit for flow rate up to 30 l/min 

wired and ready to plug in 

1.422,00 

FRE30Z Fresh water unit for tapping quantity up to 30 l/min 

with circulation pump including time-automatic and 

thermostat deactivation 

1.887,00 

BWM hot water mixer 3/4“ 120,00 

Units with higher capacity available on request 

Layer loading 

Excellent solar utilisation thanks to low flow operation 

Optimal storage loading through external 

reversing switch 

Short installation time thanks to pre-assembled units 

Layer loading unit for loading the buffer storage tank in 2 levels. 

Consisting of: solar plate-type heat exchanger for solar energy systems up 

to 40 m 2 , primary and secondary pump, reversing valve, safety installations, 

rinsing equipments and fittings. 

SLE40 Pre-assembled hydraulic station for layer loading 1.693,00 

including insulation 

Storage management: 

solar panels 

heating 

boiler 

layer loading storage tank 

fresh water 

heating 



hot water 

cold water 

FRE30 

FRE30Z 

SLE40 

The optimal speed control can be 

achieved in connection with the 

electrical current control unit 

UVR63S or UVR64S.

Plate-type heat exchanger 

Stainless steel plate-type heat exchanger, soldered incl. insulation, 

short model for big water quantities. Application: solar circuit high 

flow systems, system separation, boiler reheating 

PTH20 connection 1“, max. 40 kW 308,00 



Plate-type heat exchanger, long model for small water quantities and 

high temperature differences, including insulation. Application: solar 

circuit low flow systems for layer loading of buffer storage tank 

PTL20 connection 1“, max. solar panels area 20 m 2 424,00 




Heat exchanger accessories 

PTA 4 pieces of 1’’ connection fittings for CU18 or CU22 31,00 

BTB Mounting parts for wall fastening of plate-type heat exchanger 26,00 

DMZ20S Flow rate control 3/4“, 1-13 l/min 50,00 

DMZ20S1 Flow rate control 3/4“, 8-30 l/min 60,00 

Stainless steel plate-type heat exchanger, soldered without insulation 

SPT20 connection 1“ and 5/4“, max. solar panels area 20 m 2 424,00 

SPT50 connection 1“ and 5/4“, max. solar panels area 50 m 2 708,00 

Fin-tube heat exchanger 

Fin-tube heat exchanger for flange over 180 mm 

RIT18D Heat exchanger surface 1,8 m 2 , 1/2“ connections 243,00 

RIT23D Heat exchanger surface 2,3 m 2 , 1/2“ connections 286,00 

Fin-tube heat exchanger for flange over 240 mm 

RIT18 Heat exchanger surface 1,8 m 2 , 3/4“ connections 183,00 

RIT25 Heat exchanger surface 2,5 m 2 , 3/4“ connections 274,00 

RIT25D Heat exchanger surface 2,5 m 2 , 1“ connections 354,00 



Electrical separation for fin-tube heat exchanger 

ELT15 Electrical separation 1/2“, 1 Pair 75,00 

ELT20 Electrical separation 3/4“, 1 Pair 58,00 

ELT25 Electrical separation 1“, 1 Pair 86,00 

Flange plates 

FLP1815 Flange plate, drilled 1/2“ 40,00 

diameter 180 mm, hole diameter 150 mm 

FLP3000 Flange plate, non-drilled 30,00 

diameter 300 mm, Lochkreis 260 mm 

FLP3020 Flange plate, 300 mm, drilled 3/4“ 34,50 

FLP3025 Flange plate, 300 mm, drilled 1“ 34,50 


High height weight depth 

Flow mm mm mm 

PTH20 330 160 135 

PTH30 330 160 190 

PTH40 330 160 190 

Low height weight depth 

Flow mm mm mm 

PTL20 671 160 135 

PTL30 671 160 135 

PTL40 671 160 190 

PTL50 671 160 190 

Swimming- height weight depth 

pool mm mm mm 

SPT20 280 118 110 

SPT50 529 124 110 

For use in spas, high chlorine 

concentration or salt water the heat 

exchangers should only be used 

after consultation with SOLution!!! 

PTL 

PTH 

BTB DMZ 

for flange length Ø 

180 mm mm mm 

RIT18D 1/2“ 540 96 

RIT23D 1/2“ 640 96 

for flange length Ø 

300 mm mm mm 

RIT18 3/4“ 450 170 

RIT25 3/4“ 610 170 

RIT25D 1“ 520 175 

RIT36D 1“ 665 175 

RIT45D 1“ 790 175 

ELT 

RIT 

WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

EXCHANGER 

FRESHWATER 


ZUBEHÖR 

PELLETS- 

KAMINÖFEN

SOLution HIGH FLEXIBLE CORRUGATED STAINLESS STEEL TUBES 

Suitable for internal use and for small bending radius, coated with tearproof 

outer material, application area up to 250 C° (temporary 175 C°), ideal for 

laying in existing shafts, walls and chimneys, not suitable for laying directly in 

the ground. Pipes in 5 m long elements available. 

EWR12 Stainless steel dual-corrugated tube 2 x 12 mm, per lm 

Rockwool insulation including sensor wire 

32,00 



33,00 



41,00 

Suitable for using inside and outside, coated with tearproof outermaterial, 

application area up to 150 C (temporary 175 C), ideal for laying in existing 

shafts, walls and chimneys, not suitable for laying directly in the ground. Pipes 

in 5 m long elements available. 

EWR16K Stainless steel dual-corrugated tube 2 x 16 mm, per lm 

Rubber insulation including sensor wire 

45,50 

EWR20K Stainless steel dual-corrugated tube 2 x 20 mm, per lm 

Rubber insulation including sensor wire 

53,00 

EWRV16 Screw connection with transition CU18 per piece 5,00 

EWRV20 Screw connection with transition CU22 per piece 7,50 

EWRV16AG Screw connection with transition 1/2“AG per piece 5,00 

EWRV20AG Screw connection with transition 3/4“AG per piece 6,00 

SOLution FLEXIBLE CU-TUBES FOR LAYING DIRECTLY IN THE GROUND 

Flexible copper pipe with rockwool insulation in PE-jacket pipe for laying directly 

in the ground 

CFL18 CU-pipe 18 mm insulated for laying directly in the ground 

per lm 24,00 


per lm 27,00 


per lm 35,00 

SOLution CU-TUBES 

CUR18 CU-pipe 18 mm x 1 mm, delivered in bars of 5 m length 

per lm 5,00 


per lm 6,50 


per lm 9,00 

SOLution INSTALLATION SETS 

Mounting sets consist of sensor, wire, pipe clip and CU fittings 

SMS18 Solar installation set for CU18 tubes 122,00 



32 

Solar tubes 

EWR 

EWRK 

EWRV 


h 

h 

Dimensions of tube packages 

width b height h 

mm mm 

EWR12 99 68 

EWR16 109 73 

EWR20 119 78 

EWR16K 74 48 

EWR20K 80 54 

CUR 

b 

b 

CFL

SOLution INSULATION FOR SOLAR TUBES (per linear meter) 

ROCKWOOL INSULATION 

SRI1820 Rockwool insulation for CU18 tubes, 20 mm VPE = 42 lm 2,80 






ALK Aluminium adhesive tape per piece (50 running meters) 2,40 

RUBBER INSULATION for solar tubes used in the outdoor area 

KRI18 Rubber insulation for CU18 tubes, VPE = 72 lm 5,70 



ASS82 Aluminium protection tube for KRI18 and KRI22, 

per piece (3 linear meters) 

11,50 

ASS102 Aluminium protection tube for KRI28, 

per piece (3 linear meters) 

13,00 

SOLution ACCESSORIES 

MAG Magnesium protection anode 32,00 

FSA External current anode for boilers up to 1000 l 90,00 

ELP25 e-cartridge 2,5 kW, 6/4“ 239,00 



FWR20 3-way fixed value control 3/4“ 180,00 

FWR25 3-way fixed value control 1“ 200,00 

MSV20 3-way motor reversing valve 3/4“ 132,00 

MSV25 3-way motor reversing valve 1“ 138,00 

SOLution SERVICE AND MAINTAINANCE 

Insulation, accessories 

FSKP Antifreeze tester for propylenglykol 143,00 

PHWM Ph-value measuring tape for corrosion protection control 16,00 

FÜPS Filling pump with barrel and tube 540,00 

BOX Testing box for solar check, 

measuring and maintainance instruments 

458,00 


FWR 

FSA 

MSV 

ASS 

MAG 

ELP 

WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 

PHOTOVOLTAIK SCHWIMMBAD SOLARPILOTAGES 

ACCESSORY 

PELLETS- 

KAMINÖFEN

34 

Simple solution for your 

swimming pool 

Large surface thanks to specific 

fin-tube texture 

UV-resistant material 

Completely recyclable material 

Product complies with the statutory 

health regulations 

Easy repairs through to plug 

connection of collecting box 

and tubes 

Also available or saltwater pools 

SwimSOL 

for swimming pool heating 

weight weight temperature temperature max. pressure test effective diameter of 

empty filled max. min. resistance pressure surface area connection 

3 kg/m2 7-19 kg/m2 130° C -45° C 1,5 bar 3,0 bar 3 m2 50 mm 

Dimensioning: 

Outdoor swimming pool without cover: absorber area = water surface area (increase of temperature in summer about 5 to 6 C) 

Outdoor swimming pool with cover: absorber area = 60% of water surface area (increase of temperature in summer about 5 to 6 C) 

Indoor swimming pool without cover: absorber area = 50% of water surface area (increase of temperature in summer about 5 to 6 C) 

Indoor swimming pool with cover: absorber area = 30 % of water surface area (increase of temperature in summer about 5 to 6 C) 

Indoor swimming pool with humidification and heat recovery: absorber area = 20 % of water surface area 

Schematic diagram with reversing valve and filter pump Schematic diagram of solar pump and filter pump 

swimming pool filter 

sensor for 

absorber 

swimming pool pump 

motor reversing valve 24 V 

or a common 

return flow 

swimming pool 

SOLAR-FLEX 

swimming pool 

absorber 

water sensor 

solar 

control 

220 V 

sensor for 

absorber 

swimming pool filter 

or two separate 

recirculation groups 

swimming pool pump 

swimming pool 


SOLAR-FLEX 

swimming pool 

absorber 

possibly 

rebound plate 

solar pump 

water sensor 

solar 

control 

220 V

SOLution SWIMMING POOL ABSORBER 

Collecting pipe made of PE, absorber fin-tube made of PP, 

including hose coupling with joint bolt clip for connecting collecting pipe 

with gas tube. 

Absorber fin-tubes delivered in rolls. 

Collecting tubes are tailored to required length. Available in all dimensions! 

Price per m 2 . Delivered in two weeks. 

SAB 0 Swimming pool absorber with length of fin-tube 

from 0 m - 3 m, including connection coupling 50 mm 

99,00 


from 3,1 m - 8 m, including connection coupling 50 mm 

87,00 


from 8,1 m - 16 m, including connection coupling 50 mm 

81,00 


of more than 16 m, including connection coupling 50 mm 

77,00 

5 cm 

5 cm 

excess length of 5 cm 

at open sides 

interconnection: 

fin-tubes 

length of fin-tube R 

SOLution SWIMMING POOL ABSORBER ACCESSORIES 

SBP 907 SOLution swimming pool pump 

with preliminary filter, self-sucking, 230 V, 

50 mm adaptor with plaid connection, 

lifting height 10 m at 8 mm 

401,00 

3 /h 

SAB ADW SOLution 3-way reversing valve 

Powered by 24 V - motor 

475,00 

TSG 180M SOLution swimming pool control 

Temperature control 

including two sensors (weather resistant). 

230 V and 24 V output 

315,00 

SAB VRH SOLution distributor pipe valve 

For bleeding and draining of collecting tubes, 

integrated in collection drain. 

16,00 

SAB RSK rebound plate, PVC, Ø 50mm, 

avoids the flow back of water 

in case of standstill of the pump 

62,00 

length of collection drain 


TSG 180M 

SAB RSK 

SBP 907 

SAB ADW 

WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 

PHOTOVOLTAIK SWIMMINGPOOL SOLARLEITUNGEN 

ZUBEHÖR 

PELLETS- 

KAMINÖFEN

Photovoltaics 

Architecturally perfect implementation from 

concept design to the final plans 

On time production, delivery and installation 

High heat output 

Performance guarantee of 25 years 

SOLution NET-COUPLED PV SYSTEMS 

Net-coupled photovoltaic systems including PV modules, mountings, cabling, 

DC converter, DC activator and solar wires. 

SOLPV1 PV-systems 1,295 kWp 7.797,00 





SOLution SET-PRICE FOR ISOLATED PV SYSTEMS 

Photovoltaic systems 12V-isolated operation 

PV module, loading control and solar battery including terminal clamps 

SOLPVI100-12 PV-Stand-alone system 100W, 100Ah, 12V 862,00 

für 6 lamps, 1 radio 

Photovoltaic systems 230V-isolated operation PV module, loading control, 

DC converter and solar battery including terminal clamps 

SOLPVI100-230 PV-Stand-alone system 100W, 100Ah, 230V 1.196,00 

für 6 lamps, 1 radio, 1 TV 


Solar electricity modules 

Inverter 

Feeding counter 

Reference 

counter 

Electricity network 

Project Solarcity Linz – kindergarden 

100 m2 photovoltaic system, 

30 m2 water bearing solar panels, 

130 m2 air solar panels, 

90 m3 gravel storage tank

Photovoltaic modules 

Modules are made of highly efficient solar cells with aluminium 

frame including connecting cables and plug connections, 

integrated bypass diodes, manufacturer’s performance guarantee 

of 25 years and manufacturer’s product guarantee of 5 years 

(IEC61215, protection category 2) 

SOLution ON-ROOF PHOTOVOLTAIC MODULES 

E-134 Polycrystalline PV modules 134Wp 

1248 x 803 mm 

610,00 

RKG180/185 Polycrystalline PV modules 185Wp 

v1507 x 992 mm 

840,00 

SOLution IN-ROOF PHOTOVOLTAIC MODULES 

In-roof PV module, polycrystalline PV laminate with wooden frame with 

aluminium cover profile (compare system INSOL 20), can be combined 

with all thermal solar panels of the INSOL series. 

INSOLPV20 PV in-roof module 242Wp 1.130,00 

2030 x 1013 mm 

SOLution PHOTOVOLTAIC DC CONVERTER 

FOR NETWORK SUPPLY (EVT. DC/AC CONVERTER) 

Display, galvanic partition through HF-transformer, 

plug-in-card for data transfer, ENS integrated, designerbox, 

DC.connections as clip. 

IG15 PV power output: 1300-1850Wp 

AC nominal output: 1300W 

1.169,32 



1.368,18 



1.606,82 



2.163,64 



2.521,59 

SOLution ACCESSORIES FOR NET CONNECTED 

PHOTOVOLTAIC SYSTEMS 

H07RN-F Solar wire, 4 mm 2 , black, per 100 linear meters 101,00 

DCF25 DC activatorl with 25 A saving 133,00 

DCF40 DC activatorl with 40 A saving 133,00 

DBB0PV Roof hook installation parallel per kW 227,27 

DBB20PV Roof hook installation raised by 20° 302,27 

SSB0PV Hanger bolt installation parallel 250,00 

SSB20PV Hanger bolt installation raised by 20° 332,00 

SOLution TRANSPORT AND INSTALLATION 

TRPPV Transport of components per 5 kW 250,00 

MONTPV On-roof Module installation per kW 

(prices valid from 5 kW) 

300,00 

Cranemountings see page 17 


WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 

PHOTOVOLTAIC SCHWIMMBAD SOLARLEITUNGEN 

ZUBEHÖR 

PELLETS- 

KAMINÖFEN

38 

Heating using nothing apart from the energy of the sun produces the optimal energy 

supply system. The only thing needed is a pellet stove, which might be located in your 

living room as well as a solar energy system on your roof. Even in ten years this system 

will not increase your heating costs. 

Complete heating system derived from pellets and solar energy 

Constant control of heating costs 

using 100% renewable energy sources 

Modular systems compatible 

with each other 

Systems with assembled solar panels 

for the in-roof alternative 

Energy supply independent 

of fossil fuels 

solar panels 


The Plus solar energy 

supply system 

Heating with solar energy and pellets 

heating 

storage tank 

hot water 

boiler 

cold water 

NEW 

In combination with a pellet stove, the solar 

energy system ensures the full heating of 

your house in spring and autumn and also 

contributes in the winter. 

Due to pellets being cheaper than oil you 

can save money! Additionally emissions 

are reduced because pellets are a carbon 

neutral fuel. 


photo: Architekt Moser

NEW 

Plus energy sets 

Optimal energy system for apartmens, low 

energy and prefabricated houses. Comfortable, 

environmentally-friendly and homely. 

All stoves have microprocessor controls and 

an infinite capacity adjustment plus electrical 

ignition. 

The combination of solar and pellets 

is the perfect energy system 

Cheap fuel, low heating costs 

Electrical ignition for automatic operation 

SOLution PLUS ENERGY SYSTEM SEEFAHRER ON-ROOF 


Solar energy system for hot water heating and room heating from 

100% renewable energy consisting of: solar panels and sheet metal 

covering including installation, combi-storage tank and solar circuit 

components, including pellets stove SOLMomo with integrated 

water heat exchanger for connection to the central heating system 

PSU 500M Plus energy system with 10,5 m 2 aluminium 10.600,00 

large-scale solar panels (UNISOL100 cc) including 

mountings, combi storage tank (KSS 500) with storage unit 

WRB50 incl. insulation, recirculation group (RGP 1862), 

electrical current control unit (ESR 21S), expansion 

tank (ADG 33), 30 l antifreeze (FSK), firewood chimney stove 

Alfonso SOLMomo including recirculation booster 

PSU 500MI like Alfonso 

Richard (instead of SOLMomo with pellets stove SOLIvo.Tec 

incl. recirculation booster) 15.100,00 

PSU1000M Plus energy system with 16,8 m 2 aluminium 13.700,00 

large-scale solar panels (2 units UNISOL80 cc) 

including mountings, combi storage tank (KSS 1000) 

with storage unit WRB50 incl. insulation, recirculation 

group (RGP 2262), electrical current control unit (UVR 63S), 

expansion tank (ADG 50), 40 l antifreeze (FSK), reverse valve 

MSV 25 for layer loading, firewood chimney stove SOLMomo 

James including recirculation booster 

PSU 1000MI like James 

Juan (instead of SOLMomo with pellets stove SOLIvo.Tec 

incl. recirculation booster) 18.300,00 

Also available with in-roof solar panels for the same price! 


PLUSENERGIESET 

SEEFAHRER 

WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 

PELLETSTOVES PHOTOVOLTAIK SCHWIMMBAD SOLARLEITUNGEN 

ZUBEHÖR

Pellet stove 

Momo Ivotec Frank Ego 

power output 8 kW 3-9 / 11-13 kW 2-6 kW 7 kW 

weight 219 kg 270 - 303 kg 112 kg 187 kg 

width x height x depth (mm) 555x1238x555 580x1215x645 520x938x535 524x1092x527 

flue outlet Ø / height 150/1238 mm 100/291 mm 100/230 mm 130/938 mm 

air : water % 30% : 70% 10% : 90% 100% : 0% 100% : 0% 

power-output distribution 2:6 kW 1:12 kW 6:0 kW 7:0 kW 

burn time max/min k. A. 90/20 h 50/16 h N/A 

flue gas temperature min/max ca. 160°C 60/102°C 157/229°C N/A 

exhaust-mass-flow min/max 8 g/s 3,8/9,7 g/s 6,0/6,0 g/s N/A 

storage tank capacity 0 kg 40 kg 25 kg 0 kg 

SOLution firewood chimney stove MOMO 

Firewood chimney stove with integrated water heat exchanger. 

Big, insulated water heat exchanger with 21 l water content, door handle and 

decorative plate of glass, premium double wall construction made of steel and 

cast iron. Momo can be optimized for wood briquets or brown coal briquets 

Integrated water heat exchanger for connection to the central heating system 

Nominal output 8kW, 70% system water heating 

SOLMomo firewood chimney stove, grey metallic 2.975,00 

SOLet1 Electrical thermostat for regulation of the stove pump 176,00 

SOLution pellet stove IVOTEC 

Smart Smart TopLine TopLine CW21 CW21 Insert Insert 

Luft Wassertauscher Luft Wassertauscher Luft Wassertauscher Luft Wassertauscher 

power output 2-6 kW 2-10 kW 2-8 kW 2-10 kW 2-6 kW 2-10 kW 2-6 kW 2-10 kW 

weight 110 kg 130 kg 180 kg 180 kg 121 kg 141 kg 123 kg 137 kg 

width x height x depth (mm) 520x940x540 520x940x540 660x1132x585 660x1132x585 790x1000x560 790x1000x560 660x1168x565 660x1168x565 

flue outlet Ø / height 100/230 mm 100/230 mm 100/225 mm 100/225 mm 100/230 mm 100/230 mm 100/230 mm 100/230 mm 

air : water % 100% : 0% 20% : 80% 100% : 0% 40% : 60% 100% : 0% 20% : 80% 100% : 0% 20% : 8 0% 

power-output distribution 6:0 kW 2:8 kW 8:0 kW 4:6 kW 6:0 kW 2:8 kW 6:0 kW 2:8 kW 

burn time max/min 50/16 h 50/10 h 100/25 h 100/20 h 100/30 h 100/20 h 110/35 h 110/22 h 

flue gas temperature min/max 157/229°C 55/140°C 80/180°C 55/135°C 157/229°C 55/140°C 157/229°C 55/140°C 

exhaust-mass-flow min/max 6,0/6,0 g/s 6,0/9,5 g/s 6,0/9,5 g/s 6,0/9,5 g/s 6,0/6,0 g/s 6,4/9,5 g/s 6,4/6,0 g/s 6,4/9,0 g/s 

storage tank capacity 25 kg 25 kg 50 kg 50 kg 52 kg 52 kg 55 kg 55 kg 

Pellet stove for wood pellets with integrated water heat exchanger, base plate 

coated in metallic, base plate silver metallic, storage tank for 40 kg pellets, 

extremely silent in operation 


Nominal output 3-13kW, >90% system water heating 

SOLIvo.Tec SB Primary stove, sheet steel 6.659,00 

SOLIvo.Tec SBWR with integrated water heat exchanger cleaning 7.292,00 

SOLIvo.Tec GD Primary stove, glass front 7.723,00 

SOLIvo.Tec GDWR with integrated water heat exchanger cleaning 8.356,00 


PELLETS: 

the renewable fuel 

Pellets are compacted wood-shavings, 

which are produced as a waste byproduct 

in the timber processing industry. They 

are produced without using glue or 

other chemical additives, which leads 

to the fact that they are not only 

cheap and readily obtainable, but also 

environmentally friendly. 

The burning of pellets reduces the CO2 

emissions drastically as the emission 

is as low as when they rot naturally. 

NEW 

Momo 

NEW 

Ivo.Tec

SOLution pellet stove SMART 

Pellet stove for wood pellets, base plate coated in black senotherm, 

storage tank for about 25 kg pellets, ceramic ignition, 

premium double wall construction made of steel and cast iron, 

side covering optimal to hook-in 

Air Convection Heating Unit for room heating 

Nominal output 2-6 kW 

SOLSmartLS Primary stove Smart, black 3.723,00 

SOLSmartLB Primary stove Smart, tizianblue 3.812,00 

or metallic 


Nominal output 2-10 kW, 80% system water heating, 20% room heating 

SOLSmartWS Primary stove Smart, black 5.144,00 

SOLSmartWB Primary stove Smart, tizianblue 

or metallic 

5.233,00 

SOLution pellet stove TOPLINE 

Pellet stove for wood pellets, base plate coated in black senotherm, 

storage tank for about 52 kg pellets, ceramic ignition, 

premium construction, side covering optimal to hook-in 



SOLTopLineLS Primary stove TopLine, black 5.492,00 

SOLTopLineLB Primary stove TopLine, stainless steel, dull brushed 5.737,00 



SOLTopLineWS Primary stove TopLine, black 7.099,00 

SOLTopLineWB Primary stove TopLine, stainless steel, dull brushed 7.344,00 

SOLution pellet stove CW21 

Pellet stove for wood pellets, base plate powder-coated in metallic, 

storage tank for about 52 kg pellets, ceramic ignition, premium double wall 

construction made of steel and cast iron, 

front décor glass pane optimal to hook-in 



SOLCW21L Primary stove CW21 5.082,00 

Decor glass pane in black or blue 



SOLCW21W Primary stove CW21 6.164,00 

Decor glass pane in black or blue 


Included in delivery: 

griff, ash scraper, glass cleaner, 

cleaning brush, detailed manual 

Smart 

Topline 

CW21 

WARMWASSER 

SETPREISE 


SETPREISE 


SETPREISE 

INDACH 

KOLLEKTOREN 

AUFDACH 

KOLLEKTOREN 

BOILER 

KOMPAKTA 


KOMBISPEICHER 

TAUSCHER 

FRISCHWASSER 

PELLETSTOVES PHOTOVOLTAIK SCHWIMMBAD SOLARLEITUNGEN 

ZUBEHÖR

SOLution pellet stove INSERT 

SOLution pellet stove FRANK 

Pellet stove 

Pellet stove built-in type for wood pellets for individual covering, 

base plate coated in black senotherm, front baffle coated in metallic 

senotherm, storage tank for max. 55 kg pellets, ceramic ignition, 



Air Convection Heating Unit for room heating, Nominal output 2-6 kW 

SOLInsertL Base plate 3.885,00 



SOLInsertW Base plate 5.231,00 

SOLInsertWT Telescope for storage tank 

extension 

179,00 

Pellet stove built-in type for wood pellets, base plate coated in metallic 

senotherm, storage tank for ca. 25 kg pellets, ceramic ignition, 



Air Convection Heating Unit for room heating, Nominal output 2-6 kW 

SOLFrankF Primary stove Frank, black with flat door 3.087,00 

SOLFrankR Primary stove Frank, black with round door 3.351,00 

SOLution firewood pellet stove EGO 

Pellet stove for split logs, briquets and brown coal briquets, 

room air independent and room air dependent operating method possible, 

premium double wall construction made of steel and cast iron. 

Air Convection Heating Unit for room heating, Nominal output 7 kW 

SOLEgo Pellet stove Ego 3.045,00 

Room sealed air supply – suitable for zero-energy houses 

SOLution pellet stove ACCESSORIES 

SOLRA Recirculation booster 

including Pump group (Wilo 25/4) and fixed value control 

354,00 

SOLRA1 Recirculation booster 

including Pump group (Wilo 25/6) and fixed value control 

376,00 

SOLRTH Room thermostat with weekly clock timer 80,00 

BPS Floor plate (safety glass) 100 x 100, black 206,00 

BPK Floor plate (safety glass) 100 x 100, plain 155,00 

AK1 Motor flue gas damper for 

reduction of cooling losses, 

suitable for all pellet stoves 

440,00 

JSK Annual service inspection 257,00 

42 


Insert 

Insert 

Frank 

Ego

General Terms and Conditions 

General terms and conditions of SOLution Solartechnik GmbH 

[SOLution Solar Technology, Inc.] 

I. Validity 

The deliveries, services and offers from our company take place exclusively on the basis 

of these terms and conditions; we do not accept contrary conditions or conditions 

provided by the customer that are different, unless we had approved their validity. 

Actions in furtherance of contract performance on our part are not considered approval 

of contract conditions different from our conditions. These terms and conditions are also 

considered a general agreement for all additional legal transactions between the parties 

to the contract. 

II. Contract execution 

A customer's offer to contract requires an order confirmation. Sending the goods ordered 

by the customer also causes a contract to be executed. If offers are sent to us, the offeror 

is bound for a reasonable period, and in no case less than 8 days after receipt of the offer. 

III. Price 

All prices that we quote are to be understood as exclusive of value added tax, to the 

extent that nothing is otherwise expressly mentioned. The prices are non-binding. 

IV. Cancellation of the contract 

For default in acceptance (Item VIII) or other material grounds, such as, in particular, 

bankruptcy of the customer or dismissal of bankruptcy for lack of assets, as well as for 

payment default by the customer, we are entitled to cancel the contract if it is not yet 

fulfilled in its entirety. In the case of cancellation for the customer's negligence, we have the 

choice to demand a flat-rate amount of compensation for damages of 15% of the gross 

invoice amount or compensation for the losses actually sustained. For payment default by 

the customer, we are released from all further performance and delivery 

obligations, and are entitled to hold back performance or deliveries that are still pending, 

and to demand payments in advance or collateralisations, or to cancel the contract after a 

reasonable period of time. If the customer backs out of the contract without being 

entitled to do so, or if he demands its cancellation, then we have the option to insist on the 

fulfillment of the contract or to approve the cancellation of the contract; in the latter case 

the customer is obligated, at our election, to pay a flat-rate compensation in the amount of 

15% of the gross invoice amount or compensation for the losses actually sustained. 

V. Expenses of reminders and collection 

In the case of breach, the contractual partner (customer) is obligated to reimburse the 

expenses of reminders and collection that accrue to the creditor if they are necessary for 

adequate rights enforcement, whereby he is particularly obligated to reimburse, at most, 

the fees paid to the collection agency called in, which arise from the provisions of the 

Federal Ministry of Economic and Labor regarding the highest amount of fees charged 

by collection agencies. If the creditor carries out the reminder process himself, the debtor 

is obligated to pay an amount of € 11.00 per reminder delivered, as well as an amount 

of € 4.00 each half year for keeping evidence of the circumstances of the debt in the 

reminder process. 

VI. Delivery, transportation, default in acceptance 

Our selling prices do not include costs for delivery, assembly or installation. However, we 

perform or oganise these services upon request in exchange for separate compensation. 

Delivery is free to the buyer's address for a net product value of € 1000.00 or greater. For 

deliveries under a net product value of € 1000.00, transportation costs (environmental 

contribution) greater than € 5.00 are incurred; transportation costs for rush deliveries 

amount to € 40.00. A flat-rate delivery charge of € 72.00 is incurred, for transportation 

and unloading of each large panel module, without assembly. Transportation costs for 

photovoltaic equipment amounts to € 50.00/kW. Valid for deliveries within Austria. For 

export prices ex factory are valid. 

VII. Delivery date 

We are obligated to make delivery only after the customer has performed all of his 

obligations that are required for delivery, in particular all technical and contractual details, 

preparatory work and scheduling tasks. 

VIII. Place of performance 

Place of performance is our company's headquarters. 

IX. Trivial changes in performance 

If a consumer transaction is not involved, changes in our performance or delivery 

obligations that are trivial or otherwise reasonable for our customers are considered 

approved in advance. This particularly applies for deviations contingent on the physical 

goods (for example, for measurements, colors, look of wood and veneer, texture, 

structure and photovoltaic modules, etc.). 

X. Warranty, obligation to inspect and give notice of defects 

For an indeterminate obligation in consumer transactions, we can release ourselves from 

customers' claims for the cancellation of the contract or a reasonable price reduction, 

if we exchange the defective item for one that is without defects within a reasonable 

period of time. Furthermore, if an indeterminate obligation is not involved, we can release 

ourselves from customers' claims from the obligation to grant a reasonable price 

reduction, if we bring about an improvement that is reasonable for the consumer within 

a reasonable period of time, or if we complete that which is lacking. If a consumer 

transaction is not involved, then we fulfill customers' warranty claims for the presence of 

a repairable defect by exchanging within a reasonable period of time, or by a price 

reduction. The wages and costs expended for the installation and removal are to be 

borne by the buyer. 

Customers' claims for compensation for damages that aim to remove the defect are valid 

only after we are advised that we are in breach of the fulfillment of the warranty claims. 

If a consumer transaction is not involved, then according to §§ 377 et. seq. of the HGB 

[German Commercial Code] the goods are to be inspected immediately after delivery, 

and at most within 6 workdays. Defects identified while doing so are to be made known 

to us immediately and in writing, and at most within 3 workdays after their discovery, with 

notification of the type and scope of the defect. Notice of hidden defects is to be 

provided in writing immediately – and no more than 3 workdays after – their discovery. 

If a notice of defects is not provided, or is not provided in a timely manner, the goods 

are considered approved. 

XI. Compensation for damages 

All claims for compensation for damages and exchange costs are barred in the case of 

simple negligence. 

This does not apply to harms to persons, or for consumer transactions, to harms to 

physical goods accepted for processing. The injured party must prove the existence of 

simple or gross negligence, insofar as a consumer transaction is not involved. If a 

consumer transaction is not involved, the period of limitation for claims for compensation 

of damages amounts to three years from the transfer of risk. Liability for losses as a result 

of defects is barred, insofar as a consumer transaction is not involved. 

XII. Products liability 

Recourse receivables in the sense of § 12 of the Products Liability Law are barred unless 

the party entitled to recourse proves that the error was caused in our sphere and that it 

was caused by no less than gross negligence. 

XIII. Retention of title and its legal enforceability 

We retain title in all goods delivered, and they remain our property until complete 

payment is made. For seizures of the reserved goods by third parties – in particular 

through attachments – the customer is obligated to provide notice of our ownership and 

to notify us without delay. 

XIV. Retention 

If a consumer transaction is not involved, for a justifiable complaint the customer is not 

entitled to retain the entire gross invoice amount, but rather a reasonable portion of it, 

except in cases of rescission. In addition, we are entitled to hold our deliveries or to 

demand reasonable collateralisation for our deliveries if the contractual partner falls into 

default on the payment of receivables due, or if circumstances arise that reasonably 

indicate that termination is imminent, or if hold-ups in payment or insolvency by our 

contractual partner exist. This also applies if these circumstances already existed at the 

time of contract execution but were not known to us. 

XV. Choice of law, legal venue 

Austrian law applies. Legal venue is Wels, Austria. The applicability of the United Nations 

Convention on Contracts for the International Sale of Goods is expressly barred. The 

language of the contract is German. The parties to the contract agree to Austrian 

domestic jurisdiction. If a consumer transaction is not involved, the court actually 

responsible in the area of our company headquarters is exclusively and locally 

responsible for deciding all disputes resulting from this contract. 

XVI. Data protection, change in addresses and copyright 

The customer gives his consent for the personal data included in the purchase contract 

to be saved and processed automatically in the fulfillment of this contract. The customer 

is obligated to make changes in his residential or business address known to us, so long 

as the legal transaction that is the subject matter of the contract has not been 

completely fulfilled by both sides. If the notice is not provided, then declarations are 

considered received if they are sent to the last known address. Plans, sketches or other 

technical documents, along with samples, catalogues, prospectuses, figures and similar 

items remain our intellectual property at all times; the customer obtains no use rights or 

rights to use of any nature. 

XVII. Warranty periods 

Thermal collectors 10 years, glass breakage for all collectors excepted, battery 5 years 

(with yearly maintenance of the protective anodes), controllers and electrical parts 2 

years, pellet stove 2 years. The conditions of warranty for photovoltaic equipment conform 

the manufacturer warranty, provided that an annual maintenance of the equipment 

is carried out. 

XVIII. Price list 

Reproductions and duplicates of the price list are not permitted. Specifications, figures, 

descriptions and measurements are not binding and serve only for illustration purposes. 

Price list valid through December 31, 2006. Prices provided without quantities are prices per piece. The right to make technical changes is reserved! Goods are exclusive of value 

added tax; the right to change prices is reserved! Payment conditions: 10 days 2% discount, 20 days net. We reserve the right to adjust payment conditions (for example, delivery 

against prepayment) independent of the current credit standing of an independent organization.

Sales partner Germany 

LIGNASOL Holz-Solar-Heizsysteme 

Albrecht - Wirt - Straße 1 

72108 Rottenburg - Ergenzingen 

Tel.: +49 (0) 7457/69 77-15 

Fax: +49 (0) 7457/69 77-16 

www.lignasol.de 

LIGNASOL Holz-Solar-Heizsysteme 

Steinstraße 4 

35781 Weilburg Waldhausen 

Tel.: +49 (0) 6471/98 19 68 

Fax: +49 (0) 6471/81 87 

www.lignasol.de 

Sales partner France 

NATURE ENERGIE 

5 Grande rue 

38350 La Mure d'Isère 

Tel/Fax: +33 (0)4 76 30 77 94 

www.nature-energie.fr 

info@nature-energie.fr 

Sales partner Hungary 

Kárpi - NOVABAU Kft. 

Ipari Park, Verö J. u. 1. 

9400 Sopron 

Tel: +36 20/915 46 42 

www.karpi.hu karpi@karpi.hu 

Sales partner Ireland 



Monivea Road, Galway, IRELAND 

Tel: +353 (0) 91 769 174 

Fax: +353 (0) 91 769 485 

www.tem.ie info@tem.ie 

Hauptstraße 27 

Gewerbegebiet OST 

A-4642 Sattledt 

Tel: (+43) 07244-20 280 

Fax: (+43) 07244-20 280-18 



All our solar panels and components are quality proven! 

Solar Keymark 

SOLution - the future is today 

Umweltzeichen 

weil hoher Wirkungsgrad 

Jury Umweltzeichen

Solar energy systems & prices - Solution Solartechnik GmbH

Create successful ePaper yourself

Delete template?

Save as template?