BEARINGS - Superior Essex

BEARINGS 

BEARINGS 

Phone: 800.774.4643 • Fax: 800.768.9782

Phone: 800.774.4643 • Fax: 800.768.9782 

Table of Contents 

RADIAL BALL BEARINGS ..........................................................................................................................................5-8 

6000 SERIES ................................................................................................................................................................................6 

6200 SERIES ................................................................................................................................................................................7 

6300 SERIES ................................................................................................................................................................................8 

ANGULAR CONTACT BEARINGS ..........................................................................................................................9-12 

7200B SERIES............................................................................................................................................................................10 

7300B SERIES............................................................................................................................................................................11 

DOUBLE ROW ANGULAR CONTACT BEARINGS 5200 SERIES ..........................................................................................12 

MICRO/MINI BEARINGS ............................................................................................................................................13 

SPINDLE BEARINGS ..............................................................................................................................................15-16 

7000/7200 SERIES ....................................................................................................................................................................16 

CYLINDRICAL ROLLER BEARINGS N, NU, NJ ....................................................................................................17-19 

200 SERIES ................................................................................................................................................................................18 

300 SERIES ................................................................................................................................................................................19 

SPHERICAL ROLLER BEARINGS ..........................................................................................................................21-24 

SHAKER SCREEN BEARINGS ..................................................................................................................................................23 

SPHERICAL THRUST BEARINGS ............................................................................................................................................24 

BEARING ACCESSORIES ......................................................................................................................................25-39 

EZE-SLEEVE ® ............................................................................................................................................................................26 

CAST IRON OVERSIZE EZE-SLEEVE ® ......................................................................................................................................27 

INSULATED IEZE-SLEEVE ® ......................................................................................................................................................28 

EZE-SLEEVE ® STEEL SHAFT REPAIR SLEEVES......................................................................................................................29 

TOLERANCE RINGS..................................................................................................................................................................30 

WAVY SPRING WASHERS ......................................................................................................................................................31 

LOCK NUTS/LOCK WASHERS ................................................................................................................................................32 

COMPOUNDS – THREAD LOCKING........................................................................................................................................33 

COMPOUNDS – RETAINGING ................................................................................................................................................33 

SNAP RINGS ............................................................................................................................................................................34 

SHAFT GROUNDING BRUSHES..............................................................................................................................................35 

BTD’S ........................................................................................................................................................................................36 

MOTOR SHAFT FLINGERS ......................................................................................................................................................37 

DOW CORNING INDUSTRIAL LUBRICANTS ....................................................................................................................38-39 

BEARING TOOLS....................................................................................................................................................41-47 

PORTABLE HYDRAULIC PULLEY PULLER ..............................................................................................................................42 

POSI LOCK PULLERS ............................................................................................................................................................43 

BALL BEARING INSTALLER KIT ..............................................................................................................................................44 

BALL BEARING PULLER ADAPTERS ......................................................................................................................................44 

STANLEY COMPO-CAST ® HAMMERS ....................................................................................................................................44 

BEARING HEATERS ..................................................................................................................................................................45 

DAKE ARBOR PRESSES......................................................................................................................................................46-48 

IRD 206 VIBRATION METER ....................................................................................................................................................49 

ACCUSHIM SHAFT HOG PRECISION LASER SHAFT ALIGNMENT SYSTEM ....................................................................50 

All sales are subject to and governed by the Essex Group, Inc. Standard Terms and Conditions of Sale. 

NTN is a registered trademark of NTN Corporation of America. Essex Brownell is not affiliated with NTN Corporation of America. 

SKF is a registered trademark of SKF Corporation. Essex Brownell is not affiliated with the SKF Corporation. 

3

Phone: 800.774.4643 • Fax: 800.768.9782 

4 



SKF is a registered trademark of SKF Corporation. Essex Brownell is not affiliated with the SKF Corporation.

Phone: 800.774.4643 • Fax: 800.768.9782 

BEARING NUMBERING SYSTEMS 

RADIAL BALL BEARINGS 

Series 

Bore 

Diameter 

Ring 

Modification 

Special 

Features 

6 2 0 3 LL NR 

C3 

S26 

Base Number 

Sealed 

Shield 

Internal 

Clearance 

Series 

60 Extra light 

62 Light series 

63 Medium duty 

64 Heavy duty 

52 Double row light 

53 Double row medium 

Bore Size 

00: 10 mm 

01: 12 mm 

02: 15 mm 

03: 17 mm 

04: 20 mm 

05: 25 mm 

06: 30 mm 

Continues bore X 5 = bore in mm 

Sealed or Shielded 

No Symbol: Open 

L, LL: 1 seal, double seal 

Z, ZZ: 1 shield, double shielded 

RS, 2RS: 1 seal, double seal 

LLU: Contact seal (NTN) 

LLB: Non-contact seal (NTN) 

DDU: Sealed (NSK) 

DD: 

KBC 

Ring Modification 

N: Snap ring groove 

NR: Snap ring groove with ring included 

Internal Clearance (if listed) 

C0: Less clearance 

C3: Standard clearance USA 

C4: Greater clearance than C3 

Special Features 

S26: 150°C (Nachi) 

S28: 200°C (Nachi) 

S0: 150°C (SKF) 

S1: 200°C (SKF) 

S2: 250°C (SKF) 

MC3VL0241: Insulated (SKF) 

7MR: Insulated (prefix NTN) 

J20A: 

3NC: 

Insulated (FAG) 

Insulated Ceramic Ball 

(prefix Koyo) 




5

Phone: 800.774.4643 • Fax: 800.768.9782 

6000 SERIES 

The Extra Light Series consists of single row radial Conrad-type bearings made with bores from 10 mm to 180 mm for light to 

moderate radial loads, two-directional thrust loads, or a combination of both, where space is somewhat limited. This series is 

available in open, shielded, or sealed types, as well as with snap rings. 

K5 fit Shaft H7 fit Housing 

Dimensions Dimensions 

ID ID (in) OD OD (in) Width Width (in) Base # Open Shielded Sealed Snap Ring Min Max Min Max 

10 0.3937 26 1.0236 8 0.3150 6000 X X X X 0.3937 0.3940 1.0236 1.0244 

12 0.4724 28 1.1024 8 0.3150 6001 X X X X 0.4724 0.4728 1.1024 1.1032 

15 0.5906 32 1.2598 9 0.3543 6002 X X X X 0.5906 0.5910 1.2598 1.2608 

17 0.6693 35 1.3780 10 0.3937 6003 X X X X 0.6693 0.6697 1.3780 1.3790 

20 0.7874 42 1.6535 12 0.4724 6004 X X X X 0.7875 0.7878 1.6535 1.6545 

25 0.9843 47 1.8504 12 0.4724 6005 X X X X 0.9844 0.9847 1.8504 1.8514 

30 1.1811 55 2.1654 13 0.5118 6006 X X X X 1.1812 1.1815 2.1654 2.1666 

35 1.3780 62 2.4409 14 0.5512 6007 X X X X 1.3781 1.3785 2.4409 2.4421 

40 1.5748 68 2.6772 15 0.5906 6008 X X X X 1.5749 1.5753 2.6772 2.6784 

45 1.7717 75 2.9528 16 0.6299 6009 X X X X 1.7718 1.7722 2.9528 2.9540 

50 1.9685 80 3.1496 16 0.6299 6010 X X X X 1.9686 1.9690 3.1496 3.1508 

55 2.1654 90 3.5433 18 0.7087 6011 X X X X 2.1655 2.1660 3.5433 3.5447 

60 2.3622 95 3.7402 18 0.7087 6012 X X X X 2.3623 2.3628 3.7402 3.7416 

65 2.5591 100 3.9370 18 0.7087 6013 X X X X 2.5592 2.5597 3.9370 3.9384 

70 2.7559 110 4.3307 20 0.7874 6014 X X X X 2.7560 2.7565 4.3307 4.3321 

75 2.9528 115 4.5276 20 0.7874 6015 X X X X 2.9529 2.9534 4.5276 4.5290 

80 3.1496 125 4.9213 22 0.8661 6016 X X X X 3.1497 3.1502 4.9213 4.9229 

85 3.3465 130 5.1181 22 0.8661 6017 X X X X 3.3466 3.3472 5.1181 5.1197 

90 3.5433 140 5.5118 24 0.9449 6018 X X X X 3.5434 3.5440 5.5118 5.5134 

95 3.7402 145 5.7087 24 0.9449 6019 X X X X 3.7403 3.7409 5.7087 5.7103 

100 3.9370 150 5.9055 24 0.9449 6020 X X X X 3.9371 3.9377 5.9055 5.9071 

105 4.1339 160 6.2992 26 1.0236 6021 X X X X 4.1340 4.1346 6.2992 6.3008 

110 4.3307 170 6.6929 28 1.1024 6022 X X X X 4.3308 4.3314 6.6929 6.6945 

120 4.7244 180 7.0866 28 1.1024 6024 X X X 4.7245 4.7251 7.0866 7.0885 

130 5.1181 200 7.8740 33 1.2992 6026 X X 5.1182 5.1189 7.8740 7.8758 

140 5.5118 210 8.2677 33 1.2992 6028 X X 5.5119 5.5126 8.2677 8.2695 

150 5.9055 225 8.8583 35 1.3780 6030 X X 5.9056 5.9063 8.8583 8.8601 

160 6.2992 240 9.4488 38 1.4961 6032 X X 6.2993 6.3000 9.4488 9.4506 

170 6.6929 260 10.2362 42 1.6535 6034 X X 6.6930 6.6937 10.2362 10.2382 

180 7.0866 280 11.0236 46 1.8110 6036 X X 7.0867 7.0874 11.0236 11.0256 

Determine the base number of the bearing required. Specify the brand of bearing, and enclosure or feature required. 

Steps to build a part number: Brand Code - Base # - Enclosure - Feature 

Example: Nachi bearing with shields & snap ring NA-6020-ZZ-NR 

Brand Code Enclosure Code Feature Code 

SKF SKF Sealed -LL Snap Ring & Groove -NR 

Nachi NA Shielded -ZZ Heat Stabliized -S286 

NTN NTN Open Leave Blank C4 Intenal Clearance -C4 

KBC NB Single Seal -L 

FAG FAG Single Shield -Z 

NSK 

NSK 

6 




Phone: 800.774.4643 • Fax: 800.768.9782 

6200 SERIES 

Light Series bearings are single row radial Conrad-type bearings made with bores from 10 mm to 220 mm. They are used in 

applications with moderate to heavy radial loads, two-directional thrust loads, or a combination of both. This series is available 

in open, shielded, or sealed types, as well as with snap rings. 



ID (mm) ID (in) OD (mm) OD (in) Width(mm) Width(in) Base # Open Shielded Sealed Snap Ring Min Max Min Max 

10 0.3937 30 1.1811 9 0.3543 6200 X X X X 0.3937 0.3940 1.8110 1.1819 

12 0.4724 32 1.2598 10 0.3937 6201 X X X X 0.4724 0.4728 1.2598 1.2608 

12.7 0.5000 32 1.2598 10 0.3937 6201-08 X X X 1.2598 1.2608 

12.7 0.5000 40 1.5748 12 0.4724 6202-08 X X X 1.5748 1.5758 

13 0.5118 32 1.2598 10 0.3937 6201-13 X X X 1.2598 1.2608 

15 0.5906 35 1.3780 11 0.4331 6202 X X X X 0.5906 0.5910 1.3780 1.3790 

15.875 0.6250 35 1.3780 11 0.4331 6202-10 X X X 1.3780 1.3790 

16 0.6299 35 1.3780 11 0.4331 6202-16 X X X 1.3780 1.3790 

17 0.6693 40 1.5748 12 0.4724 6203 X X X X 0.6693 0.6697 1.5748 1.5758 

19.05 0.7500 40 1.5748 12 0.4724 6203-12 X X X 1.5748 1.5758 

20 0.7874 47 1.8504 14 0.5512 6204 X X X X 0.7875 0.7878 1.8504 1.8514 

22.225 0.8750 47 1.8504 14 0.5512 6204-14 X X X 1.8504 1.8514 

25 0.9843 52 2.0472 15 0.5906 6205 X X X X 0.9844 0.9847 2.0472 2.0484 

30 1.1811 62 2.4409 16 0.6299 6206 X X X X 1.1812 1.1815 2.4409 2.4421 

35 1.3780 72 2.8346 17 0.6693 6207 X X X X 1.3781 1.3785 2.8346 2.8358 

40 1.5748 80 3.1496 18 0.7087 6208 X X X X 1.5749 1.5753 3.1496 3.1508 

45 1.7717 85 3.3465 19 0.7480 6209 X X X X 1.7718 1.7722 3.3465 3.3479 

50 1.9685 90 3.5433 20 0.7874 6210 X X X X 1.9686 1.9690 3.5433 3.5447 

55 2.1654 100 3.9370 21 0.8268 6211 X X X X 2.1655 2.1660 3.9370 3.9384 

60 2.3622 110 4.3307 22 0.8661 6212 X X X X 2.3623 2.3628 4.3307 4.3321 

65 2.5591 120 4.7244 23 0.9055 6213 X X X X 2.5592 2.5597 4.7244 4.7258 

70 2.7559 125 4.9213 24 0.9449 6214 X X X X 2.7560 2.7565 4.9213 4.9229 

75 2.9528 130 5.1181 25 0.9843 6215 X X X X 2.9529 2.9534 5.1181 5.1197 

80 3.1496 140 5.5118 26 1.0236 6216 X X X X 3.1497 3.1502 5.5118 5.5134 

85 3.3465 150 5.9055 28 1.1024 6217 X X X X 3.3466 3.3472 5.9055 5.9071 

90 3.5433 160 6.2992 30 1.1811 6218 X X X X 3.5434 3.5440 6.2992 6.3008 

95 3.7402 170 6.6929 32 1.2598 6219 X X X X 3.7403 3.7409 6.6929 6.6945 

100 3.9370 180 7.0866 34 1.3386 6220 X X X X 3.9371 3.9377 7.0866 7.0885 

105 4.1339 190 7.4803 36 1.4173 6221 X X X X 4.1340 4.1346 7.4803 7.4821 

110 4.3307 200 7.8740 38 1.4961 6222 X X X X 4.3308 4.3314 7.8740 7.8758 

120 4.7244 215 8.4646 40 1.5748 6224 X X X 4.7245 4.7251 8.4646 8.4664 

130 5.1181 230 9.0551 40 1.5748 6226 X X 5.1182 5.1189 9.0551 9.0569 

140 5.5118 250 9.8425 42 1.6535 6228 X X 5.5119 5.5126 9.8425 9.8443 

150 5.9055 270 10.6299 45 1.7717 6230 X X 5.9056 5.9063 10.6299 10.6319 

160 6.2992 290 11.4173 48 1.8898 6232 X X 6.2993 6.3000 11.4173 11.4193 

170 6.6929 310 12.2047 52 2.0472 6234 X X 6.6930 6.6937 12.2047 12.2067 

180 7.0866 320 12.5984 52 2.0472 6236 X 7.0867 7.0874 12.5984 12.6006 

190 7.4803 340 13.3858 55 2.1654 6238 X 7.4805 7.4812 13.3858 13.3880 

200 7.8740 360 14.1732 58 2.2835 6240 X 7.8742 7.8749 14.1732 14.1754 

220 8.6614 400 15.7480 65 2.5591 6244 X 8.6616 8.6623 15.7480 15.7502 

Determine the base number of the bearing required. Specify the brand of bearing, and enclosure or feature required. 


Example: Nachi bearing open no enclosure: NA-6220 










7

Phone: 800.774.4643 • Fax: 800.768.9782 

6300 SERIES 

The Medium Series consists of single row radial Conrad-type bearings made with bores from 10 mm to 180 mm for light to moderate 

radial loads, two-directional thrust loads, or a combination of both, where space is somewhat limited. This series is available 

in open, shielded, or sealed types, as well as with snap rings. 



ID ID (in) OD OD (in) Width Width (in) Base # Open Shielded Sealed Snap Ring Min Max Min Max 

10 0.3937 35 1.3780 11 0.4331 6300 X X X X 0.3937 0.3940 1.3780 1.3789 

12 0.4724 37 1.4567 12 0.4724 6301 X X X X 0.4725 0.4728 1.4567 1.4577 

15 0.5906 42 1.6535 13 0.5118 6302 X X X X 0.5906 0.5909 1.6535 1.6545 

15.875 0.6250 40 1.5748 12 0.4724 6302-10 X X X 1.5748 1.5758 

16 0.6299 40 1.5748 12 0.4724 6302-16 X X X 1.5748 1.5758 

17 0.6693 47 1.8504 14 0.5512 6303 X X X X 0.6693 0.6696 1.8504 1.8514 

20 0.7874 52 2.0472 15 0.5906 6304 X X X X 0.7875 0.7878 2.0472 2.0484 

25 0.9843 62 2.4409 17 0.6693 6305 X X X X 0.9843 0.9847 2.4409 2.4421 

30 1.1811 72 2.8346 19 0.7480 6306 X X X X 1.1812 1.1815 2.8346 2.8358 

35 1.3780 80 3.1496 21 0.8268 6307 X X X X 1.3780 1.3785 3.1496 3.1508 

40 1.5748 90 3.5433 23 0.9055 6308 X X X X 1.5749 1.5753 3.5433 3.5447 

45 1.7717 100 3.9370 25 0.9843 6309 X X X X 1.7718 1.7722 3.9370 3.9384 

50 1.9685 110 4.3307 27 1.0630 6310 X X X X 1.9686 1.9690 4.3307 4.3321 

55 2.1654 120 4.7244 29 1.1417 6311 X X X X 2.1654 2.1659 4.7244 4.7258 

60 2.3622 130 5.1181 31 1.2205 6312 X X X X 2.3623 2.3628 5.1181 5.1197 

65 2.5591 140 5.5118 33 1.2992 6313 X X X X 5.5591 2.5596 5.5118 5.5134 

70 2.7559 150 5.9055 35 1.3780 6314 X X X X 2.7560 2.7565 5.9055 5.9071 

75 2.9528 160 6.2992 37 1.4567 6315 X X X X 2.9528 2.9533 6.2992 6.3008 

80 3.1496 170 6.6929 39 1.5354 6316 X X X X 3.1497 3.1508 6.6929 6.6945 

85 3.3465 180 7.0866 41 1.6142 6317 X X X X 3.3466 3.3472 7.0866 7.0882 

90 3.5433 190 7.4803 43 1.6929 6318 X X X X 3.5434 3.5440 7.4803 7.4821 

95 3.7402 200 7.8740 45 1.7717 6319 X X X X 3.7403 3.7409 7.8740 7.8758 

100 3.9370 215 8.4646 47 1.8504 6320 X X X X 3.9371 3.9377 8.4646 8.4664 

105 4.1339 225 8.8583 49 1.9291 6321 X X X X 4.1340 4.1346 8.8601 8.8583 

110 4.3307 240 9.4488 50 1.9685 6322 X X X 4.3308 4.3314 9.4506 9.4488 

120 4.7244 260 10.2362 55 2.1654 6324 X X 4.7245 4.7251 10.2382 10.2362 

130 5.1181 280 11.0236 58 2.2835 6326 X X 5.1182 5.1189 11.0256 11.0236 

140 5.5118 300 11.8110 62 2.4409 6328 X X 5.5119 5.5126 11.8130 11.8110 

150 5.9055 320 12.5984 65 2.5591 6330 X 5.9056 5.9063 12.6006 12.5984 

160 6.2992 340 13.3858 68 2.6772 6332 X 6.2993 6.3000 13.3880 13.3858 

170 6.6929 360 14.1732 72 2.8346 6334 X 6.6930 6.6937 14.1754 14.1732 

180 7.0866 380 14.9606 75 2.9528 6336 X 7.0867 7.0874 14.9628 14.9606 

Determine the base number of the bearing r equired. Specify the brand of bearing, and enclosure or feature required. 


Example: Nachi bearing open no enclosure: NA-6330 







NSK 

NSK 

8 




Phone: 800.774.4643 • Fax: 800.768.9782 


ANGULAR CONTACT BEARINGS 

Bore 

Diameter 

Series 

Contact 

Angle 

Flush 

Ground 

7 3 1 0 B L1 G 

Basic Number 

Cage 

Series 

3: Double row with filling slot 

3: SKF-European designation for double row (SKF only) 

5: Double row without filling slot 

7: Single row angular contact 

Bore Size 

00: 10 mm 01: 12 mm 

02: 15 mm 03: 17 mm 

04: 20 mm 05: 25 mm 

06: 30 mm Continues bore X 5 = bore in mm 

Contact Angle 

B: 40° contact angle 

C: 15° contact angle 

BE: 40° extra capacity (SKF only) 

Cage Designations 

M, MU: Machined bronze (Nachi, Koyo, NSK) 

L1B: Bronze cage, ball riding design (NTN) 

L1: Bronze (NTN) 

Y: Nylon (Nachi) 

ST: Steel (Nachi) 

J: Pressed steel (NTN) 

T1: Phenolic (NTN) 

T2: Plastic, Nylon or Teflon (NTN) 

Y: Pressed brass (SKF) 

J: Pressed steel (SKF) 

P: Polyimide (SKF) 

M: Machined brass (SKF, NSK) 

MPUA: Machined brass (FAG) 

Y: Pressed brass (NSK) 

Flush Ground 

CB: Flush ground (SKF) 

G: Flush ground (NTN, NSK) 

Tolerance 

P5: ISO Class 5 (ABEC 5) 



Most Common Suffix 

40°, Bronze, Flush Ground 

BMU: Nachi, Koyo 

BL1G: NTN 

BECBM: SKF 

BECBY: SKF (pressed bronze cage) 

BMPUA: FAG 

BMG: NSK 

BL1BG: NTN ball riding design 

Double Row Suffix 

L, LL: 1 seal, double sealed 

Z, ZZ: 1 shield, double shield 

Blank: Open 

NR: Snap ring and groove 




9

Phone: 800.774.4643 • Fax: 800.768.9782 

Brand 

SKF 

Nachi 

NTN 

FAG 

MRC 

KOYO 

NSK 

Code 

SKF 

NA 

NTN 

FAG 

MRC 

KOYO 

NSK 

ANGULAR CONTACT BEARINGS 

Single row angular contact ball bearings feature raceways with high and low shoulders. These 

opposing raceways are designed to carry thrust load in one direction. The bearings in this series 

are assembled with a specific internal clearance so that they will have a specified contact angle 

under load. In electric motor applications the standard contact angle is 40 degrees. These 

bearings feature a bronze cage and are flush ground for stacking. 

7200B SERIES 



ID ID (in) OD OD (in) Width Width (in) Base # Min Max Min Max 

10 0.3937 30 1.1811 9 0.3543 7200 0.3937 0.3940 1.1811 1.1819 

12 0.4724 32 1.2598 10 0.3937 7201 0.4725 0.4729 1.2598 1.2608 

15 0.5906 35 1.3780 11 0.4331 7202 0.5907 0.5911 1.3780 1.3790 

17 0.6693 40 1.5748 12 0.4724 7203 0.6694 0.6698 1.5748 1.5758 

20 0.7874 47 1.8504 14 0.5512 7204 0.7875 0.7879 1.8504 1.8514 

25 0.9843 52 2.0472 15 0.5906 7205 0.9844 0.9848 2.0472 2.0484 

30 1.1811 62 2.4409 16 0.6299 7206 1.1812 1.1816 2.4409 2.4421 

35 1.3780 72 2.8346 17 0.6693 7207 1.3781 1.3785 2.8346 2.8358 

40 1.5748 80 3.1496 18 0.7087 7208 1.5749 1.5753 3.1496 3.1508 

45 1.7717 85 3.3465 19 0.7480 7209 1.7718 1.7722 3.3465 3.3478 

50 1.9685 90 3.5433 20 0.7874 7210 1.9686 1.9690 3.5433 3.5447 

55 2.1654 100 3.9370 21 0.8268 7211 2.1655 2.1660 3.9370 3.9384 

60 2.3622 110 4.3307 22 0.8661 7212 2.3623 2.3628 4.3307 4.3321 

65 2.5591 120 4.7244 23 0.9055 7213 2.5592 2.5597 4.7244 4.7258 

70 2.7559 125 4.9213 24 0.9449 7214 2.7560 2.7565 4.9213 4.9228 

75 2.9528 130 5.1181 25 0.9843 7215 2.9529 2.9534 5.1181 5.1197 

80 3.1496 140 5.5118 26 1.0236 7216 3.1497 3.1502 5.5118 5.5134 

85 3.3465 150 5.9055 28 1.1024 7217 3.3466 3.3472 5.9055 5.9071 

90 3.5433 160 6.2992 30 1.1811 7218 3.5434 3.5440 6.2992 6.3008 

95 3.7402 170 6.6929 32 1.2598 7219 3.7403 3.7409 6.6929 6.6945 

100 3.9370 180 7.0866 34 1.3386 7220 3.9371 3.9377 7.0866 7.0882 

105 4.1339 190 7.4803 36 1.4173 7221 4.1340 4.1346 7.4803 7.4821 

110 4.3307 200 7.8740 38 1.4961 7222 4.3308 4.3314 7.8740 7.8758 

120 4.7244 215 8.4646 40 1.5748 7224 4.7245 4.7251 8.4646 8.4664 

130 5.1181 230 9.0551 40 1.5748 7226 5.1182 5.1189 9.0551 9.0569 

140 5.5118 250 9.8425 42 1.6535 7228 5.5119 5.5126 9.8425 9.8443 

150 5.9055 270 10.6299 45 1.7717 7230 5.9056 5.9063 10.6299 10.6319 

160 6.2992 290 11.4173 48 1.8898 7232 6.2993 6.3000 11.4173 11.4193 

170 6.6929 310 12.2047 52 2.0472 7234 6.6930 6.6937 12.2047 12.2067 

180 7.0866 320 12.5984 52 2.0472 7236 7.0868 7.0875 12.5984 12.6006 

190 7.4803 340 13.3858 55 2.1654 7238 7.4805 7.4812 13.3858 13.3880 

Duplex mounted bearings use a set of two (or more) on a common shaft with the inner and 

outer rings clamped solidly together. They are used to gain axial shaft control, rigidity and extra 

capacity. There are three fundamental combinations in duplex bearings: face-to-face (DF), 

back-to-back (DB), and tandem (DT). 

Common Suffix 

BMU 40 deg Bronze cage, flush ground 

BL1G 40 deg 40 deg, Bronze cage, flush ground 

BECBM 40 deg 40 deg, Machined Brass cage, flush ground 

BECBY 40 deg 40 deg, Pressed Brass cage, flush ground 

Steps to build a part number: 

Brand Code - Series and Bore diameter - Contact Angle and Cage Designation 

Example: Nachi bearing series 72, 50mm bore diameter, 40° contact angle and machined bronze 

cage: NA-7210-BMU 

10 




Phone: 800.774.4643 • Fax: 800.768.9782 

7300B SERIES 



ID ID (in) OD OD (in) Width Width (in) Base # Min Max Min Max 

10 0.3937 35 1.3780 11 0.4331 7300 0.3937 0.3940 1.3780 1.3790 

12 0.4724 37 1.4567 12 0.4724 7301 0.4725 0.4729 1.4567 1.4577 

15 0.5906 42 1.6535 13 0.5118 7302 0.5907 0.5911 1.6535 1.6545 

17 0.6693 47 1.8504 14 0.5512 7303 0.6694 0.6698 1.8504 1.8514 

20 0.7874 52 2.0472 15 0.5906 7304 0.7875 0.7879 2.0472 2.0484 

25 0.9843 62 2.4409 17 0.6693 7305 0.9844 0.9848 2.4409 2.4421 

30 1.1811 72 2.8346 19 0.7480 7306 1.1812 1.1816 2.8346 2.8358 

35 1.3780 80 3.1496 21 0.8268 7307 1.3781 1.3785 3.1496 3.1508 

40 1.5748 90 3.5433 23 0.9055 7308 1.5749 1.5753 3.5433 3.5447 

45 1.7717 100 3.9370 25 0.9843 7309 1.7718 1.7722 3.9370 3.9384 

50 1.9685 110 4.3307 27 1.0630 7310 1.9686 1.9690 4.3307 4.3321 

55 2.1654 120 4.7244 29 1.1417 7311 2.1655 2.1660 4.7244 4.7258 

60 2.3622 130 5.1181 31 1.2205 7312 2.3623 2.3628 5.1181 5.1197 

65 2.5591 140 5.5118 33 1.2992 7313 2.5592 2.5597 5.5118 5.5134 

70 2.7559 150 5.9055 35 1.3780 7314 2.7560 2.7565 5.9055 5.9071 

75 2.9528 160 6.2992 37 1.4567 7315 2.9529 2.9534 6.2992 6.3008 

80 3.1496 170 6.6929 39 1.5354 7316 3.1497 3.1502 6.6929 6.6945 

85 3.3465 180 7.0866 41 1.6142 7317 3.3466 3.3472 7.0866 7.0882 

90 3.5433 190 7.4803 43 1.6929 7318 3.5434 3.5440 7.4803 7.4821 

95 3.7402 200 7.8740 45 1.7717 7319 3.7403 3.7409 7.8740 7.8758 

100 3.9370 215 8.4646 47 1.8504 7320 3.9371 3.9377 8.4646 8.4664 

105 4.1339 225 8.8583 49 1.9291 7321 4.1340 4.1346 8.8583 8.8601 

110 4.3307 240 9.4488 50 1.9685 7322 4.3308 4.3314 9.4488 9.4506 

120 4.7244 260 10.2362 55 2.1654 7324 4.7245 4.7251 10.2362 10.2382 

130 5.1181 280 11.0236 58 2.2835 7326 5.1182 5.1189 11.0236 11.0256 

140 5.5118 300 11.8110 62 2.4409 7328 5.5119 5.5126 11.8110 11.8130 

150 5.9055 320 12.5984 65 2.5591 7330 5.9056 5.9063 12.5984 12.6006 

160 6.2992 340 13.3858 68 2.6772 7332 6.2993 6.3000 13.3858 13.3880 

Duplex mounted bearings use a set of two (or more) on a common shaft with the inner and 

outer rings clamped solidly together. They are used to gain axial shaft control, rigidity and extra 

capacity. There are three fundamental combinations in duplex bearings: face-to-face (DF), 

back-to-back (DB), and tandem (DT). 

Common Suffix 

BMU 40 deg Bronze cage, flush ground 

BL1G 40 deg Bronze cage, flush ground 

BECBM 40 deg Machined Brass cage, flush ground 

BECBY 40 deg Pressed Brass cage, flush ground 

BMG 40 deg Bronze cage, flush ground 

Steps to build a part number: 

Brand Code - Series and Bore diameter - Contact Angle and Cage Designation 

Example: Nachi bearing series 73, 110mm bore diameter, 40° contact angle and machined bronze 

cage: NA-7322-BMU 

Brand 

SKF 

Nachi 

NTN 

FAG 

MRC 

KOYO 

NSK 

Code 

SKF 

NA 

NTN 

FAG 

MRC 

KOYO 

NSK 




11

Phone: 800.774.4643 • Fax: 800.768.9782 

DOUBLE ROW ANGULAR CONTACT BEARINGS 

Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are 

so related that the contact angle is similar to a pair of back-to-back single row bearings. The 5200 and 5300 series 

offer continuous races and can carry thrust loads in either direction. 

5200 SERIES 



ID ID (in) OD OD (in) Width Width (in) Base # Open Shielded Sealed Min Max Min Max 

10 0.3937 30 1.1811 14.3 0.5630 5200 X X X 0.3937 0.3940 1.1811 1.1819 

12 0.4724 32 1.2598 15.9 0.6260 5201 X X X 0.4725 0.4729 1.2598 1.2608 

15 0.5906 35 1.3780 15.9 0.6260 5202 X X X 0.5907 0.5911 1.3780 1.3790 

17 0.6693 40 1.5748 17.5 0.6890 5203 X X X 0.6694 0.6698 1.5748 1.5758 

20 0.7874 47 1.8504 20.6 0.8110 5204 X X X 0.7875 0.7879 1.8504 1.8514 

25 0.9843 52 2.0472 20.6 0.8110 5205 X X X 0.9844 0.9848 2.0472 2.0484 

30 1.1811 62 2.4409 23.8 0.9370 5206 X X X 1.1812 1.1816 2.4409 2.4421 

35 1.3780 72 2.8346 27 1.0630 5207 X X X 1.3781 1.3785 2.8346 2.8358 

40 1.5748 80 3.1496 30.2 1.1890 5208 X X X 1.5749 1.5753 3.1496 3.1508 

45 1.7717 85 3.3465 30.2 1.1890 5209 X X X 1.7718 1.7722 3.3465 3.3478 

50 1.9685 90 3.5433 30.2 1.1890 5210 X X X 1.9686 1.9690 3.5433 3.5447 

55 2.1654 100 3.9370 33.3 1.3110 5211 X X X 2.1655 2.1660 3.9370 3.9384 

60 2.3622 110 4.3307 36.5 1.4370 5212 X X X 2.3623 2.3628 4.3307 4.3321 

65 2.5591 120 4.7244 38.1 1.5000 5213 X X X 2.5592 2.5597 4.7244 4.7258 

70 2.7559 125 4.9213 39.7 1.5630 5214 X X 2.7560 2.7565 4.9213 4.9228 

75 2.9528 130 5.1181 41.3 1.6260 5215 X X 2.9529 2.9534 5.1181 5.1197 

80 3.1496 140 5.5118 44.4 1.7480 5216 X X 3.1497 3.1502 5.5118 5.5134 

85 3.3465 150 5.9055 49.2 1.9370 5217 X X 3.3466 3.3472 5.9055 5.9071 

90 3.5433 160 6.2992 52.4 2.0630 5218 X X 3.5434 3.5440 6.2992 6.3008 

95 3.7402 170 6.6929 55.6 2.1890 5219 X 3.7403 3.7409 6.6929 6.6945 

100 3.9370 180 7.0866 60.3 2.3740 5220 X 3.9371 3.9377 7.0866 7.0882 

5300 SERIES 



ID ID (in) OD OD (in) Width Width (in) Base # Open Shielded Sealed Min Max Min Max 

15 0.5906 42 1.6535 19 0.7480 5302 X X X 0.5907 0.5911 1.6535 1.6545 

17 0.6693 47 1.8504 22.2 0.8740 5303 X X X 0.6694 0.6698 1.8504 1.8514 

20 0.7874 52 2.0472 22.2 0.8740 5304 X X X 0.7875 0.7879 2.0472 2.0484 

25 0.9843 62 2.4409 25.4 1.0000 5305 X X X 0.9844 0.9848 2.4409 2.4421 

30 1.1811 72 2.8346 30.2 1.1890 5306 X X X 1.1812 1.1816 2.8346 2.8358 

35 1.3780 80 3.1496 34.9 1.3740 5307 X X X 1.3781 1.3785 3.1496 3.1508 

40 1.5748 90 3.5433 36.5 1.4370 5308 X X X 1.5749 1.5753 3.5433 3.5447 

45 1.7717 100 3.9370 39.7 1.5630 5309 X X X 1.7718 1.7722 3.9370 3.9384 

50 1.9685 110 4.3307 44.4 1.7480 5310 X X X 1.9686 1.9690 4.3307 4.3321 

55 2.1654 120 4.7244 49.2 1.9370 5311 X X 2.1655 2.1660 4.7244 4.7258 

60 2.3622 130 5.1181 54 2.1260 5312 X X 2.3623 2.3628 5.1181 5.1197 

65 2.5591 140 5.5118 58.7 2.3110 5313 X X 2.5592 2.5597 5.5118 5.5134 

70 2.7559 150 5.9055 63.5 2.5000 5314 X X 2.7560 2.7565 5.9055 5.9071 

75 2.9528 160 6.2992 68.3 2.6890 5315 X X 2.9529 2.9534 6.2992 6.3008 

80 3.1496 170 6.6929 68.3 2.6890 5316 X X 3.1497 3.1502 6.6929 6.6945 

Steps to build a part number: Brand Code - Series and Bore diameter - Contact Angle and Cage Designation 

Example: Nachi bearing series 52, 50mm bore diameter, NA-5210 



Nachi NA Shielded -ZZ 

NTN NTN Open Leave Blank 

FAG 

FAG 

12 




Phone: 800.774.4643 • Fax: 800.768.9782 

MICRO/MINI BEARINGS 

INCH SERIES 

Base Part # ID ID OD OD Width Width 

Open Inches mm Inches mm Inches mm 

R2 0.1250 3.1750 0.3750 9.5250 0.1562 3.9670 

R3 0.1875 4.7620 0.5000 12.7000 0.1562 3.9670 

R4 0.2500 6.3500 0.6250 15.8750 0.1960 4.9780 

R4A 0.2500 6.3500 0.7500 19.0499 0.2188 5.5575 

R6 0.3750 9.5250 0.8750 22.2250 0.2118 5.3797 

R8 0.5000 12.7000 1.1250 28.5750 0.2500 6.3500 

R10 0.6250 15.8750 1.3750 34.9250 0.2812 7.1425 

R12 0.7500 19.0500 1.6250 41.2750 0.3125 7.9375 

R14 0.8750 22.2250 1.8750 47.6250 0.3750 9.5250 

R16 1.0000 25.4000 2.0000 50.8000 0.3750 9.5250 

R18 1.1250 28.5750 2.1250 53.9750 0.3750 9.5250 

R20 1.2500 31.7500 2.2500 57.1500 0.3750 9.5250 

Prefix: NA-, NB- 

Sealed and shielded bearings will have different widths. 

MINATURE 

Base Part # ID (mm) OD (mm) Width (mm) 

607 7 19 6 

608 8 22 7 

609 9 24 7 

623 3 10 4 

624 4 13 5 

625 5 16 5 

626 6 19 6 

627 7 22 7 

629 9 26 8 

634 4 16 5 

Prefix: NA-, NB- 

Suffix: -LL, -ZZ 

FELT SEAL 

Base Part # Base Part # 

NB-87008 

NB-87009 

NB-87011 

NB-87013 

NB-87016 

NB-87036 

NB-87037 

NB-87038 

NB-87039 

NB-87500 

NB-87501 

NB-87502 

NB-87503 

NB-87504 

NB-87505 

NB-87506 

NB-87507 

NB-87508 

NB-88011 

NB-88013 

NB-88016 

NB-88500 

NB-88501 

NB-88502 

NB-88503 

NB-88504 

NB-88505 

NB-88506 

NB-88507 

NB-88508 

NB-WC87008 

NB-WC87009 

NB-WC87013 

NB-WC87016 

NB-WC87036 

NB-WC87037 

NB-WC87038 

NB-WC87039 

NB-WC87500 

NB-WC87501 

NB-WC87502 

NB-WC87503 

NB-WC87504 

NB-WC88054 

NB-WC88500 

NB-WC88501 

NB-WC88502 

NB-WC88503 




13

Your Link To Incredible Quality 

Whatever your application—from machine tool 

spindles to pumps to gear changers to heavy 

machinery—you can trust Nachi bearings to 

provide you with the dependable quality you 

need, every time. Our vertical integration gives 

us the industry’s most meticulous quality control. 

We produce bearings with our own tooling, on 

our own machine tools, using our own steel. 

There’s simply no weak link in our production 

chain—so you’re assured of the performance 

that meets your highest standards. 

Cylindrical 

Angular 

Contact 

Spherical 

Roller 

Radial Ball 

Ultra 

Precision 

Spherical 

Thrust 

www.nachiamerica.com

Phone: 800.774.4643 • Fax: 800.768.9782 


SPINDLE BEARINGS 

Dimensional 

Series 

Contact 

Angle 

Arrangment 

Precision 

Class 

70 01 C Y DU L P4 

Bore 

Size 

Cage 

Type 

Preload 

Dimensional Series 

70: 7000 series 

72: 7200 series 

BNHO: 7000 small ball 

Bore Size 

00: 10 mm 

01: 12 mm 

02: 15 mm 

03: 17 mm 

04: 20 mm 

05: 25 mm 

06: 30 mm 


Contact Angle 

C: 15° 

A5: 25° 

Cage Type 

T: Machined phenolic 

A5: Molded polyimide 

Arrangement 

DU: Duplex 

Preload 

GE: 

GL : 

GM : 

GH : 

L : 

M : 

H : 

Extra light (Nachi) 

Light (Nachi) 

Medium (Nachi) 

Heavy (Nachi) 

Light (NSK) 

Medium (NSK) 

Heavy (NSK) 

Precision Class 

P5: ISO Class 5 



PA5: ABEC 5 (NSK) 






15

Phone: 800.774.4643 • Fax: 800.768.9782 

Brand 

SKF 

Nachi 

NSK 

MRC 

SKF/FAG/MRC 

Code 

SKF 

NA 

NSK 

MRC 

NB 

SPINDLE BEARINGS 

Single row angular contact spindle ball bearings feature a 15 degree contact angle. They are 

designed for grinding spindle applications that combine both radial and axial load carrying ability 

in one bearings. They are manufactured to a high precision standard that ensures a virtually 

vibration-free operation. 

7000/7200 SERIES 

ID ID (in) OD OD (in) Width Width (in) Base # 

10 0.3937 26 1.0236 8 0.3150 7000 

10 0.3937 30 1.1811 9 0.3543 7200 

12 0.4724 28 1.1024 8 0.3150 7001 

12 0.4724 32 1.2598 10 0.3937 7201 

15 0.5906 32 1.2598 9 0.3543 7002 

15 0.5906 35 1.3780 11 0.4331 7202 

17 0.6693 35 1.3780 10 0.3937 7003 

17 0.6693 40 1.5748 12 0.4724 7203 

20 0.7874 42 1.6535 12 0.4724 7004 

20 0.7874 47 1.8504 14 0.5512 7204 

25 0.9843 47 1.8504 12 0.4724 7005 

25 0.9843 52 2.0472 15 0.5906 7205 

30 1.1811 55 2.1654 13 0.5118 7006 

30 1.1811 62 2.4409 16 0.6299 7206 

35 1.3780 62 2.4409 14 0.5512 7007 

35 1.3780 72 2.8346 17 0.6693 7207 

40 1.5748 68 2.6772 15 0.5906 7008 

40 1.5748 80 3.1496 18 0.7087 7208 

45 1.7717 75 2.9528 16 0.6299 7009 

45 1.7717 85 3.3465 19 0.7480 7209 

50 1.9685 80 3.1496 16 0.6299 7010 

50 1.9685 90 3.5433 20 0.7874 7210 

55 2.1654 90 3.5433 18 0.7087 7011 

55 2.1654 100 3.9370 21 0.8268 7211 

60 2.3622 95 3.7402 18 0.7087 7012 

60 2.3622 110 4.3307 22 0.8661 7212 

65 2.5591 100 3.9370 18 0.7087 7013 

65 2.5591 120 4.7244 23 0.9055 7213 

70 2.7559 110 4.3307 20 0.7874 7015 

70 2.7559 125 4.9213 24 0.9449 7214 

75 2.9528 115 4.5276 20 0.7874 7015 

75 2.9528 130 5.1181 25 0.9843 7215 

80 3.1496 125 4.9213 22 0.8661 7016 

80 3.1496 140 5.5118 26 1.0236 7216 

85 3.3465 130 5.1181 22 0.8661 7017 

85 3.3465 150 5.9055 28 1.1024 7217 

90 3.5433 140 5.5118 24 0.9449 7018 

90 3.5433 160 6.2992 30 1.1811 7218 

95 3.7402 145 5.7087 24 0.9449 7019 

95 3.7402 170 6.6929 32 1.2598 7219 

100 3.9370 150 5.9055 24 0.9449 7020 

100 3.9370 180 7.0866 34 1.3386 7220 

Housing and shaft fits vary depending on the OEM. 

Steps to build a part number: Brand Code - Base # - Suffix 

Example: NA-7012-CYDUP4 

Common Suffix 

-CYDUP4 

Nachi 

16 




Phone: 800.774.4643 • Fax: 800.768.9782 


CYLINDRICAL ROLLER BEARINGS 

Bore 

Diameter 

Series 

Internal 

Design 

Clearance 

NU 2 0 4 E C3 

Type 

Basic Number 

Cage 

(blank if 

standard) 

Type 

N: Two inner flanges – no outer 

NU: Two outer flanges – no inner 

NF: One lip outer ring with inner ring and roller assembly 

NJ: Two outer flanges – one inner 

NH: NJ series bearing with HJ thrust collar (NJ+HJ=NH) 

NN: Double row precision cylindrical bearings 

HJ: Separate thrust collar 

R, RN, 

RNU: Special cylindrical roller bearings 

Series 

10: Extra light series 

2: Light series 

22: Light series extra wide 

23: Medium series extra wide 

3: Medium series 

4: Heavy series 

Internal Design 

E: High capacity cylindrical roller bearings 

Cage 

Bronze, M, MV: 

ST: 

EG: 

Bronze 

Steel 

Polyimide 

Internal Clearance 

No suffix: Normal radial clearance 

C3: Radial clearance greater than normal 

C4: Radial clearance greater than C3 

C5: Radial clearance greater than C4 




17

Phone: 800.774.4643 • Fax: 800.768.9782 

CYLINDRICAL ROLLER BEARINGS N, NU, NJ 

In applications where high radial capacity at very high speeds in relatively limited space is needed, cylindrical roller bearings 

proved eminently successful. Cylindrical roller bearings, as the name implies, use cylindrical-shaped rollers as the rolling, loadcarrying 

elements. Usually, the rollers are made with the length of the roller being equal to the diameter of the roller. Cylindrical 

roller bearings offer the highest radial-load capacity for a given bore and width of all types of rolling bearings. While they 

have no special field of appllications, cylindrical roller bearings are generally found in heavy-duty, power-producing, powertransmission, 

and power-absorbing machinery. In the N type, ther rollers run between two integral flanges attached to the 

inner ring; the outer ring is made without flanges. 

In the NJ type, there are two flanges on the outer ring and one on the inner ring. This allows the cylindrical roller bearing to 

handle small axial loads. A common application for an NJ design cylinderical roller bearing is to locate the armature of the 

electrical traction motor used on diesel-electric locomotives. 

The most common type of cylindrical roller bearing is the single row design, known as NU. In the NU type, the flanges are placed 

on the outer ring and the inner ring is made without flanges. 

200 SERIES 

I.D. O.D. Width Recommended Shaft Fit Recommended Housing Fit 

MM Inch MM Inch MM Inch Part Number Max Min Max Min 

20 0.7874 47 1.8504 14 0.551 N,NJ,NU204 0.7878 0.7875 1.8514 1.8504 

25 0.9843 52 2.0472 15 0.591 N,NJ,NU205 0.9847 0.9844 2.0484 2.0472 

30 1.1811 62 2.4409 16 0.630 N,NJ,NU206 1.1815 1.1512 2.4421 2.4409 

35 1.3780 72 2.8346 17 0.669 N,NJ,NU207 1.3785 1.3781 2.8358 2.8346 

40 1.5748 80 3.1496 18 0.709 N,NJ,NU208 1.5753 1.5749 3.1508 3.1496 

45 1.7717 85 3.3465 19 0.748 N,NJ,NU209 1.7725 1.7721 3.3479 3.3465 

50 1.9685 90 3.5433 20 0.787 N,NJ,NU210 1.9693 1.9689 3.5447 3.5433 

55 2.1654 100 3.9370 21 0.827 N,NJ,NU211 2.1663 2.1658 3.9384 3.937 

60 2.3622 110 4.3307 22 0.866 N,NJ,NU212 2.3631 2.3626 4.3321 4.3307 

65 2.5591 120 4.7244 23 0.906 N,NJ,NU213 2.5600 2.5595 4.7258 4.7244 

70 2.7559 125 4.9213 24 0.945 N,NJ,NU214 2.7568 2.7563 4.9229 4.9213 

75 2.9528 130 5.1181 25 0.984 N,NJ,NU215 2.9537 2.9532 5.1197 5.1181 

80 3.1496 140 5.5118 26 1.024 N,NJ,NU216 3.1505 3.1500 5.5134 5.5118 

85 3.3465 150 5.9055 28 1.102 N,NJ,NU217 3.3476 3.3470 5.9071 5.9055 

90 3.5433 160 6.2992 30 1.181 N,NJ,NU218 3.5444 3.5438 6.3008 6.2992 

95 3.7402 170 6.6929 32 1.260 N,NJ,NU219 3.7413 3.7407 6.6945 6.6929 

100 3.9370 180 7.0866 34 1.339 N,NJ,NU220 3.9381 3.9375 7.0885 7.0866 

105 4.1339 190 7.4803 36 1.417 N,NJ,NU221 4.1353 4.1344 7.4821 7.4803 

110 4.3307 200 7.8740 38 1.496 N,NJ,NU222 4.3321 4.3312 7.8758 7.874 

120 4.7244 215 8.4646 40 1.575 N,NJ,NU224 4.7258 4.7249 8.4664 8.4646 

130 5.1181 230 9.0551 40 1.575 N,NJ,NU226 5.1197 5.1187 — — 

140 5.5118 250 9.8425 42 1.654 N,NJ,NU228 5.5134 5.5124 9.8443 9.8425 

150 5.9055 270 10.6299 45 1.772 N,NJ,NU230 5.9075 5.9066 — — 

160 6.2992 290 11.4173 48 1.890 N,NJ,NU232 6.3012 6.3003 — — 

170 6.6929 310 12.2047 52 2.047 N,NJ,NU234 6.6949 6.6940 12.2067 12.2047 

Prefix: 

Suffix: 

NA- Nachi -BRONZE Bronze 

NB- SKF/FAG -ST Steel 

-EMC3 Bronze, C3 

18 




Phone: 800.774.4643 • Fax: 800.768.9782 

CYLINDRICAL ROLLER BEARINGS N, NU, NJ 

300 SERIES 

I.D. O.D. Width Recommended Shaft Fit Recommended Housing Fit 


20 0.7874 52 2.0472 15 0.591 N,NJ,NU304 0.7878 0.7875 2.0484 2.0472 

25 0.9843 62 2.4409 17 0.669 N,NJ,NU305 0.9847 0.9847 2.4421 2.4409 

30 1.1811 72 2.8346 19 0.748 N,NJ,NU306 1.1815 1.1512 2.8358 2.8346 

35 1.3780 80 3.1496 21 0.827 N,NJ,NU307 1.3785 1.3781 3.1508 3.1496 

40 1.5748 90 3.5433 23 0.906 N,NJ,NU308 1.5753 1.5749 3.5447 3.5433 

45 1.7717 100 3.9370 25 0.984 N,NJ,NU309 1.7725 1.7721 3.9384 3.937 

50 1.9685 110 4.3307 27 1.063 N,NJ,NU310 19.6930 1.9689 4.3321 4.3307 

55 2.1654 120 4.7244 29 1.142 N,NJ,NU311 2.1663 2.1658 4.7258 4.7244 

60 2.3622 130 5.1181 31 1.220 N,NJ,NU312 2.3631 2.3626 5.1197 5.1181 

65 2.5591 140 5.5118 33 1.299 N,NJ,NU313 2.5600 2.5595 5.5134 5.5118 

70 2.7559 150 5.9055 35 1.378 N,NJ,NU314 2.7568 2.7863 5.9071 5.9055 

75 2.9528 160 6.2992 37 1.457 N,NJ,NU315 2.9537 2.9532 6.3008 6.2992 

80 3.1496 170 6.6929 39 1.535 N,NJ,NU316 3.1505 3.1500 6.6945 6.6929 

85 3.3465 180 7.0866 41 1.614 N,NJ,NU317 3.3476 3.3470 7.0885 7.0866 

90 3.5433 190 7.4803 43 1.693 N,NJ,NU318 3.5444 3.5438 7.4821 7.4803 

95 3.7402 200 7.8740 45 1.772 N,NJ,NU319 3.7413 3.7407 7.8758 7.874 

100 3.9370 215 8.4646 47 1.850 N,NJ,NU320 3.9381 3.9375 8.4664 8.4646 

105 4.1339 225 8.8583 49 1.929 N,NJ,NU321 4.1353 4.1344 8.8601 8.8583 

110 4.3307 240 9.4488 50 1.969 N,NJ,NU322 4.3321 4.3312 9.4506 9.4488 

120 4.7244 260 10.2362 55 2.165 N,NJ,NU324 4.7258 4.7249 10.2382 10.2362 

130 5.1181 280 11.0236 58 2.283 N,NJ,NU326 5.1197 5.1187 11.0256 11.0236 

140 5.5118 300 11.8110 62 2.441 N,NJ,NU328 5.5134 5.5124 11.813 11.811 

150 5.9055 320 12.5984 65 2.559 N,NJ,NU330 5.9075 5.9066 12.6006 12.5984 

160 6.2992 340 13.3858 68 2.677 N,NJ,NU332 6.3012 6.3003 13.388 13.3858 

170 6.6929 360 14.1732 72 2.835 N,NJ,NU334 6.6949 6.6940 14.1754 14.1732 

Prefix: 

Suffix: 

NA- Nachi -BRONZE Bronze 

NB- SKF/FAG -ST Steel 

-EMC3 Bronze, C3 

N Series NJ Series NU Series 




19

Phone: 800.774.4643 • Fax: 800.768.9782 

NOTES 

20 




Phone: 800.774.4643 • Fax: 800.768.9782 


SPHERICAL ROLLER BEARINGS 

Series 

Bore 

Diameter 

Bore 

Angle 

Lubrication 

Hole/Groove 

Tolerance 

2 2 2 1 0 

E K 

C3 

Internal 

Design 

Cage 

Clearance 

Base Number 

Bore Diameter 

00: 10 mm 

01: 12 mm 

02: 15 mm 

03: 17 mm 

04: 20 mm 

05: 25 mm 

06: 30 mm 


Internal Design 

E: Extra capacity (NTN) 

CC: Improved design (SKF) 

E: Standard roller type (Nachi) 

EX: Large symmetric roller (Nachi) 

AEX: Large asymmetric roller (Nachi) 

E: Improved capacity (SKF thrust) 

Bore Angle 

None: Cylindrical 

K: 1:12 tapered bore 

Cage 

None: Pressed steel (Nachi) 

MY: Machined brass (Nachi) 

M2,M4: Machined bronze (SKF) 

J: Pressed steel (SKF, NTN) 

L1: Machined brass (NTN) 

T2: Nylon (NTN) 

Lubrication Hole/Groove 

None: No hole or groove 

W33: Hole and groove (SKF, Nachi) 

W20: Hole only (Nachi) 

D1: Hole and Groove (NTN) 

Clearance 

C3: Standard clearance USA 

Tolerance 

VS1: C3 Shaker screen (NTN) 

VS2: C4 Shaker screen (NTN) 

W502: Shaker screen (SKF) 

Series 




21

Phone: 800.774.4643 • Fax: 800.768.9782 

SPHERICAL ROLLER BEARINGS 

Spherical roller bearings have two rows of rollers in separate raceways. This allows the bearing to compensate 

for angular thrust errors. They have large radial and thrust load capacity for heavy shock and impact loads, 

making them suitable for heavy industrial equipment. Spherical roller bearings are internally self-aligning; they 

can compensate for static misalignment caused by poorly aligned shafts as well as misalignments caused by 

shaft deflection. 

Shaft Fit Dim 

Housing Fit 

I.D. O.D. Width Normal Load Normal Load 


40 1.5748 80 3.1496 23 0.906 22208 1.5753 1.5749 3.1508 3.1496 

40 1.5748 90 3.5433 33 1.299 22308 1.5753 1.5749 3.5447 3.5433 

45 1.7717 85 3.3465 23 0.906 22209 1.7725 1.7721 3.3479 3.3465 

45 1.7717 100 3.9370 40 1.575 22309 1.7725 1.7724 3.9384 3.9370 

50 1.9685 90 3.5433 23 0.906 22210 1.9693 1.9689 3.5447 3.5433 

50 1.9685 110 4.3307 40 1.575 22310 1.9693 1.9689 4.3321 4.3307 

55 2.1654 100 3.9370 25 0.984 22211 2.1663 2.1658 3.9384 3.9370 

55 2.1654 120 4.7244 43 1.693 22311 2.1663 2.1658 4.7258 4.7244 

60 2.3622 110 4.3307 28 1.102 22212 2.3631 2.3626 4.3321 4.3307 

60 2.3622 130 5.1181 46 1.811 22312 2.3631 2.3626 5.1197 5.1181 

65 2.5591 120 4.7244 31 1.220 22213 2.5600 2.5595 4.7258 4.7244 

65 2.5591 140 5.5118 48 1.890 22313 2.5600 2.5595 5.5134 5.5118 

70 2.7559 125 4.9213 31 1.220 22214 2.7568 2.7563 4.9229 4.9213 

70 2.7559 150 5.9055 51 2.008 22314 2.7568 2.7563 5.9071 5.9055 

75 2.9528 130 5.1181 31 1.220 22215 2.9537 2.9532 5.1197 5.1181 

75 2.9528 160 6.2992 55 2.165 22315 2.9537 2.9532 6.3008 6.2992 

80 3.1496 140 5.5118 33 1.299 22216 3.1505 3.1500 5.5134 5.5118 

80 3.1496 170 6.6929 58 2.283 22316 3.1505 3.1500 6.6945 6.6929 

85 3.3465 150 5.9055 36 1.417 22217 3.3479 3.3470 5.9071 5.9055 

85 3.3465 180 7.0866 60 2.362 22317 3.3479 3.3470 7.0885 7.0866 

90 3.5433 160 6.2992 40 1.575 22218 3.5447 3.5438 6.3008 6.2992 

90 3.5433 190 7.4803 64 2.520 22318 3.5447 3.5438 7.4821 7.4803 

95 3.7402 170 6.6929 43 1.693 22219 3.7416 3.7407 6.6945 6.6929 

95 3.7402 200 7.8740 67 2.638 22319 3.7416 3.7407 7.8758 7.8740 

100 3.9370 180 7.0866 46 1.811 22220 3.9384 3.9375 7.0885 7.0866 

100 3.9370 215 8.4646 73 2.874 22320 3.7384 3.9375 8.4664 8.4646 

110 4.3307 200 7.8740 53 2.087 22222 4.3321 4.3312 7.8758 7.8740 

110 4.3307 240 9.4488 80 3.150 22322 4.3321 4.3312 9.4506 9.4488 

120 4.7244 215 8.4646 58 2.283 22224 4.7258 4.7249 8.4664 8.4646 

120 4.7244 260 10.2362 86 3.386 22324 4.7258 4.7249 10.2382 10.2362 

130 5.1181 280 11.0236 93 3.661 22326 5.1201 5.1192 11.0256 11.0236 

140 5.5118 250 9.8425 68 2.677 22228 5.5138 5.5129 9.8443 9.8425 

140 5.5118 300 11.8110 102 4.016 22328 5.5138 5.5129 11.8130 11.8110 

150 5.9055 320 12.5984 108 4.252 22330 5.9075 5.9066 12.6006 12.5984 

160 6.2992 340 13.3858 114 4.488 22332 6.3019 6.3009 13.3880 13.3858 

170 6.6929 310 12.2047 86 3.386 22234 6.6956 6.6946 12.2067 12.2047 

170 6.6929 360 14.1732 120 4.724 22334 6.6956 6.6946 14.1754 14.1732 

To build a part number: Brand Code - Part Number - Suffix 

Brand Code Suffix 

Nachi NA -EW33 

SKF SKF -CCEW33 

SKF/FAG NB -VAJ 

22 




Phone: 800.774.4643 • Fax: 800.768.9782 

SHAKER SCREEN BEARINGS 

A special form of the spherical roller bearing has been developed especially for shaker or vibrating screens used in mines, 

quarries, foundries, and similar applications. This bearing is essentially of the same construction as the regular spherical roller 

bearing although there are several important differences. In a shaker screen application, the entire bearing is subjected to a 

rotary motion which sets up a centrifugal force acting on the cage and all pans of the bearing. To meet this demanding condition, 

the spherical roller bearing for shaker screen operation has a unique cage design, permitting the bearing to operate at high 

eccentricity and great speed. Additionally, this special spherical roller bearing offers higher load-carrying capacity and longer 

life than the standard spherical roller bearing. 

Recommended 

Recommended 

I.D. O.D. Width K6 Shaft Fit H7 Housing Fit 


40 1.5748 90 3.5433 33 1.299 22308 1.5737 1.5743 3.5426 3.5412 

45 1.7717 100 3.9370 40 1.575 22309 1.7706 1.7712 3.9363 3.9349 

50 1.9685 110 4.3307 40 1.575 22310 1.9674 1.9680 4.3300 4.3286 

55 2.1654 120 4.7244 43 1.693 22311 2.1641 2.1648 4.7237 4.7223 

60 2.3622 130 5.1181 46 1.811 22312 2.3609 2.3616 5.1173 5.1157 

65 2.5591 140 5.5118 48 1.890 22313 2.5578 2.5585 5.5110 5.5094 

70 2.7559 150 5.9055 51 2.008 22314 2.7546 2.7553 5.9047 5.9031 

75 2.9528 160 6.2992 55 2.165 22315 2.9515 2.9522 6.2982 6.2967 

80 3.1496 170 6.6929 58 2.283 22316 3.1483 3.1490 6.6919 6.6904 

85 3.3465 180 7.0866 60 2.362 22317 3.3448 3.3457 7.0856 7.0841 

90 3.5433 190 7.4803 64 2.520 22318 3.5417 3.5425 7.4791 7.4774 

95 3.7402 200 7.8740 67 2.638 22319 3.7385 3.7394 7.8728 7.8711 

100 3.9370 215 8.4646 73 2.874 22320 3.9354 3.9362 8.4634 8.4617 

110 4.3307 240 9.4488 80 3.150 22322 4.3291 4.3299 9.4476 9.4459 

120 4.7244 260 10.2362 86 3.386 22324 4.7228 4.7236 10.2348 10.2329 

To build a part number: Brand Code - Part Number - Suffix 

Brand Code Suffix 

SKF SKF -M2W502 

Nachi NA -AEXW33 




23

Phone: 800.774.4643 • Fax: 800.768.9782 

SPHERICAL THRUST BEARINGS 

Spherical roller thrust bearings are similar to double row spherical roller bearings, but have a greater contact angle. They are 

guided by ground flanges on the inner ring and operate against the spherical raceway in the outer ring. The contact angle is 

approximately 45°. Machined cages are normally used, and oil lubrication is recommended. 

Recommended 

Recommended 

I.D. O.D. Width K6 Shaft Fit H7 Housing Fit 


60 2.3622 130 5.1181 42 1.654 29412 2.3623 2.3630 5.1181 5.1197 

65 2.5591 140 5.5118 45 1.772 29413 2.5592 2.5599 5.5118 5.5134 

70 2.7559 150 5.9055 48 1.890 29414 2.7560 2.7567 5.9055 5.9071 

75 2.9528 160 6.2992 51 2.008 29415 2.9529 2.9536 6.2992 6.3008 

80 3.1496 170 6.6929 54 2.126 29416 3.1497 3.1504 6.6929 6.6945 

85 3.3465 150 5.9055 39 1.535 29317 3.3466 3.3473 5.9055 5.9071 

85 3.3465 180 7.0866 58 2.283 29417 3.3466 3.3475 7.0866 7.0882 

90 3.5433 155 6.1024 39 1.535 29318 3.5434 3.5443 6.1024 6.1040 

90 3.5433 190 7.4803 60 2.362 29418 3.5434 3.5443 7.4803 7.4819 

100 3.9370 170 6.6929 42 1.654 29320 3.9371 3.9380 6.6929 6.6945 

100 3.9370 210 8.2677 67 2.638 29420 3.9371 3.9380 8.2677 8.2695 

110 4.3307 190 7.4803 48 1.890 29322 4.3308 4.3317 7.4803 7.4821 

110 4.3307 230 9.0551 73 2.874 29422 4.3308 4.3317 9.0551 9.0569 

120 4.7244 210 8.2677 54 2.126 29324 4.7245 4.7254 8.2677 8.2695 

120 4.7244 250 9.8425 78 3.071 29424 4.7245 4.7254 9.8425 9.8443 

130 5.1181 225 8.8583 58 2.283 29326 5.1182 5.1192 8.8583 8.8601 

130 5.1181 270 10.6299 85 3.346 29426 5.1182 5.1192 10.6299 10.6319 

140 5.5118 240 9.4488 60 2.362 29328 5.5119 5.5129 9.4488 9.4506 

140 5.5118 280 11.0236 85 3.346 29428 5.5119 5.5129 11.0236 11.0256 

150 5.9055 250 9.8425 60 2.362 29330 5.9056 5.9066 9.8425 9.8443 

150 5.9055 300 11.8110 90 3.543 29430 5.9056 5.9066 11.8110 11.8130 

160 6.2992 270 10.6299 67 2.638 29332 6.2993 6.3003 10.6299 10.6319 

160 6.2992 320 12.5984 95 3.740 29432 6.2993 6.3003 12.5984 12.6006 

170 6.6929 280 11.0236 67 2.638 29334 6.6930 6.6940 11.0236 11.0256 

170 6.6929 340 13.3858 103 4.055 29434 6.6930 6.6940 13.3858 13.3880 

180 7.0866 300 11.8110 73 2.874 29336 7.0867 7.0877 11.8110 11.8130 

180 7.0866 360 14.1732 109 4.291 29436 7.0867 7.0877 14.1732 14.1754 

190 7.4803 320 12.5984 78 3.071 29338 7.4804 7.4816 12.5984 12.6006 

190 7.4803 380 14.9606 115 4.528 29438 7.4804 7.4816 14.9606 14.9628 

200 7.8740 340 13.3858 85 3.346 29340 7.8741 7.8753 13.3858 13.3880 

200 7.8740 400 15.7480 122 4.803 29440 7.8741 7.8753 15.7480 15.7502 

Determine the base number of the bearing required. Specify the brand of bearing. Determin suffex by brand. 

Brand 

SKF 

Nachi 

Code 

E 

EX 

Application Note: The larger the size of the bore on a spherical thrust bearing, results in a slower bearing RPM rating. On applications such as 

deep well pumps, where 1200 RPM and 1800 RPM motors are used in oil lubricated systems, it is recommended to verify the maximum speed 

rating of the bearing to be used. Speed ratings vary by bearing manufacturer. Exceeding the maximum speed rating of a bearing will result in 

premature failure. Grease lubrication of spherical thrust bearings results in an even greater reduction in speed limits. 

24 




Phone: 800.774.4643 • Fax: 800.768.9782 

BEARING ACCESSORIES 

EZE-SLEEVE ® ................................................................................................................................26 

CAST IRON OVERSIZE EZE-SLEEVE ® ........................................................................................27 

INSULATED IEZE-SLEEVE ® ..........................................................................................................28 

EZE-SLEEVE ® STEEL SHAFT REPAIR SLEEVES ........................................................................29 

TOLERANCE RINGS ....................................................................................................................30 

WAVY SPRING WASHERS ..........................................................................................................31 

LOCK NUTS/LOCK WASHERS ....................................................................................................32 

ADHESIVES – THREAD LOCKING ..............................................................................................33 

ADHESIVES – RETAINING ..........................................................................................................33 

SNAP RINGS ................................................................................................................................34 

SHAFT GROUNDING BRUSHES ................................................................................................35 

BTD’S ............................................................................................................................................36 

MOTOR SHAFT FLINGERS..........................................................................................................37 

DOW CORNING INDUSTRIAL LUBRICANTS........................................................................38-39 

25

Phone: 800.774.4643 • Fax: 800.768.9782 

EZE-SLEEVE ® 

Cast Iron Bearing Housing Repair Sleeves 

Advantages: 

•Reduces machining time 

•Increases productivity 

•Excellent heat transfer 

•Provides a superior finish 

•Environmentally safe 

•Class 40 gray iron 

•In stock ready to ship 

•Custom sizes available 

Part# Bearing Series Sleeve Length 

EZ-3020 6200 - 20 mm 

EZ-3220 6201 - 20 mm 

EZ-3520 6202 6300 20 mm 

EZ-3720 - 6301 20 mm 

EZ-4020 6203 - 20 mm 

EZ-4220 - 6302 20 mm 

EZ-4720 6204 6303 20 mm 

EZ-5222 6205 6304 22 mm 

EZ-6230 6206 6305 30 mm 

EZ-6240 6206 6305 40 mm 

EZ-6250 6206 6305 50 mm 

EZ-7230 6207 6306 30 mm 

EZ-7240 6207 6306 40 mm 

EZ-7250 6207 6306 50 mm 

EZ-8030 6208 6307 30 mm 

EZ-8040 6208 6307 40 mm 

EZ-8050 6208 6307 50 mm 

EZ-8530 6209 - 30 mm 

EZ-8540 6209 - 40 mm 

EZ-8550 6209 - 50 mm 

EZ-9030 6210 6308 30 mm 

EZ-9040 6210 6308 40 mm 

EZ-9050 6210 6308 50 mm 

EZ-10030 6211 6309 30 mm 

EZ-10040 6211 6309 40 mm 

EZ-10050 6211 6309 50 mm 

EZ-11030 6212 6310 30 mm 

EZ-11040 6212 6310 40 mm 

EZ-11050 6212 6310 50 mm 

EZ-11060 6212 6310 60 mm 

EZ-12040 6213 6311 40 mm 

EZ-12050 6213 6311 50 mm 

EZ-12060 6213 6311 60 mm 

EZ-12070 6213 6311 70 mm 

EZ-12540 6214 - 40 mm 

EZ-12550 6214 - 50 mm 

EZ-12560 6214 - 60 mm 

EZ-12570 6214 - 70 mm 

EZ-13040 6215 6312 40 mm 

EZ-13050 6215 6312 50 mm 

EZ-13060 6215 6312 60 mm 

EZ-13070 6215 6312 70 mm 

EZ-14040 6216 6313 40 mm 

EZ-14050 6216 6313 50 mm 

EZ-14060 6216 6313 60 mm 

EZ-14070 6216 6313 70 mm 

EZ-15040 6217 6314 40 mm 

EZ-15050 6217 6314 50 mm 

EZ-15060 6217 6314 60 mm 

EZ-15070 6217 6314 70 mm 

EZ-16040 6218 6315 40 mm 

EZ-16050 6218 6315 50 mm 

EZ-16060 6218 6315 60 mm 

EZ-16070 6218 6315 70 mm 

EZ-17050 6219 6316 50 mm 

EZ-17060 6219 6316 60 mm 

EZ-17070 6219 6316 70 mm 

EZ-17080 6219 6316 80 mm 

EZ-18050 6220 6317 50 mm 

EZ-18060 6220 6317 60 mm 

EZ-18070 6220 6317 70 mm 

EZ-18080 6220 6317 80 mm 

EZ-19050 6221 6318 50 mm 


EZ-19060 6221 6318 60 mm 

EZ-19070 6221 6318 70 mm 

EZ-19080 6221 6318 80 mm 

EZ-20050 6222 6319 50 mm 

EZ-20060 6222 6319 60 mm 

EZ-20070 6222 6319 70 mm 

EZ-20080 6222 6319 80 mm 

EZ-20090 6222 6319 90 mm 

EZ-21560 6224 6320 60 mm 

EZ-21570 6224 6320 70 mm 

EZ-21580 6224 6320 80 mm 

EZ-21590 6224 6320 90 mm 

EZ-215100 6224 6320 100 mm 

EZ-22560 - 6321 60 mm 

EZ-22570 - 6321 70 mm 

EZ-22580 - 6321 80 mm 

EZ-22590 - 6321 90 mm 

EZ-225100 - 6321 100 mm 

EZ-23060 6226 - 60 mm 

EZ-23070 6226 - 70 mm 

EZ-23080 6226 - 80 mm 

EZ-23090 6226 - 90 mm 

EZ-230100 6226 - 100 mm 

EZ-24070 - 6322 70 mm 

EZ-24080 - 6322 80 mm 

EZ-24090 - 6322 90 mm 

EZ-240100 - 6322 100 mm 

EZ-25070 6228 - 70 mm 

EZ-25080 6228 - 80 mm 

EZ-25090 6228 - 90 mm 

EZ-250100 6228 - 100 mm 

EZ-250110 6228 - 110 mm 

EZ-26070 - 6324 70 mm 

EZ-26080 - 6324 80 mm 

EZ-26090 - 6324 90 mm 

EZ-260100 - 6324 100 mm 

EZ-260110 - 6324 110 mm 

EZ-27070 6230 - 70 mm 

EZ-27080 6230 - 80 mm 

EZ-27090 6230 - 90 mm 

EZ-270100 6230 - 100 mm 

EZ-270110 6230 - 110 mm 

EZ-28080 - 6326 80 mm 

EZ-28090 - 6326 90 mm 

EZ-280100 - 6326 100 mm 

EZ-280110 - 6326 110 mm 

EZ-280120 - 6326 120 mm 

EZ-29080 6232 - 80 mm 

EZ-29090 6232 - 90 mm 

EZ-290100 6232 - 100 mm 

EZ-290110 6232 - 110 mm 

EZ-290120 6232 - 120 mm 

EZ-30080 - 6328 80 mm 

EZ-30090 - 6328 90 mm 

EZ-300100 - 6328 100 mm 

EZ-300110 - 6328 110 mm 

EZ-300120 - 6328 120 mm 

EZ-310120 6234 6424 120 mm 

EZ-320120 6236 6330 120 mm 

EZ-340120 6238 6332 120 mm 

EZ-360120 6240 6334 120 mm 

EZ-380120 - 6336 120 mm 

EZ-400120 6244 6338 120 mm 

26 

All sales are subject to and governed by the Essex Group, Inc. Standard Terms and Conditions of Sale.

Phone: 800.774.4643 • Fax: 800.768.9782 

CAST IRON OVERSIZE EZE-SLEEVE ® 

Cast Iron Bearing Housing Repair Sleeves 

Cast Approx. Approx. 

Iron Bearing Bearing Sleeve Sleeve OD Sleeve OD 

Part No. No. No. Length ± .05 mm ± .002” 

EZ-3020-5 6200 - 20 mm 34 mm 1.339 

EZ-3220-5 6201 - 20 mm 36 mm 1.418 

EZ-3520-5 6202 6300 20 mm 39 mm 1.536 

EZ-3720-5 - 6301 20 mm 41 mm 1.615 

EZ-4020-5 6203 - 20 mm 44 mm 1.733 

EZ-4220-5 - 6302 20 mm 46 mm 1.811 

EZ-4720-5 6204 6303 20 mm 51 mm 2.009 

EZ-5222-5 6205 6304 22 mm 56 mm 2.205 

EZ-6250-5 6206 6305 50 mm 66 mm 2.599 

EZ-7250-5 6207 6306 50 mm 77 mm 3.032 

EZ-8050-5 6208 6307 50 mm 85 mm 3.347 

EZ-8550-5 6209 - 50 mm 90 mm 3.544 

EZ-9050-5 6210 6308 50 mm 95 mm 3.741 

EZ-10050-5 6211 6309 50 mm 106 mm 4.174 

EZ-11060-5 6212 6310 60 mm 116 mm 4.568 

EZ-12070-5 6213 6311 70 mm 126 mm 4.961 

EZ-12570-5 6214 - 70 mm 131 mm 5.158 

EZ-13070-5 6215 6312 70 mm 137 mm 5.394 

EZ-14070-5 6216 6313 70 mm 147 mm 5.788 

EZ-15070-5 6217 6314 70 mm 157 mm 6.182 

EZ-16070-5 6218 6315 70 mm 167 mm 6.575 

EZ-17080-5 6219 6316 80 mm 177 mm 6.969 

EZ-18080-5 6220 6317 80 mm 187 mm 7.363 

EZ-19080-5 6221 6318 80 mm 197 mm 7.757 

EZ-20090-5 6222 6319 90 mm 208 mm 8.190 

EZ-21590-5 6224 6320 90 mm 223 mm 8.780 

EZ-225100-5 - 6321 100 mm 233 mm 9.174 

EZ-230100-5 6226 - 100 mm 238 mm 9.371 

EZ-240100-5 - 6322 100 mm 249 mm 9.804 

EZ-250110-5 6228 - 110 mm 259 mm 10.197 

EZ-260110-5 - 6324 110 mm 269 mm 10.591 

EZ-270110-5 6230 - 110 mm 279 mm 10.984 

EZ-280110-5 - 6326 120 mm 289 mm 11.378 

EZ-290120-5 6232 - 120 mm 299 mm 11.772 

EZ-300120-5 - 6328 120 mm 309 mm 12.165 

NEW PRODUCT! 

• Oversized Sleeves 

• 0.040” Over 

Standard 

• Very Simple to 

Install 

Advantages: 








All sales are subject to and governed by the Essex Group, Inc. Standard Terms and Conditions of Sale. 27

Phone: 800.774.4643 • Fax: 800.768.9782 

INSULATED IEZE-SLEEVE ® 

Cast Iron Bearing Housing Insulated Repair Sleeves 

Advantages: 








Call for delivery. 


IEZ-3020-9 6200 - 20 mm 

IEZ-3220-9 6201 - 20 mm 

IEZ-3520-9 6202 6300 20 mm 

IEZ-3720-9 - 6301 20 mm 

IEZ-4020-9 6203 - 20 mm 

IEZ-4220-9 - 6302 20 mm 

IEZ-4720-9 6204 6303 20 mm 

IEZ-5222-9 6205 6304 22 mm 

IEZ-6230-9 6206 6305 30 mm 

IEZ-6240-9 6206 6305 40 mm 

IEZ-6250-9 6206 6305 50 mm 

IEZ-7230-9 6207 6306 30 mm 

IEZ-7240-9 6207 6306 40 mm 

IEZ-7250-9 6207 6306 50 mm 

IEZ-8030-9 6208 6307 30 mm 

IEZ-8040-9 6208 6307 40 mm 

IEZ-8050-9 6208 6307 50 mm 

IEZ-8530-9 6209 - 30 mm 

IEZ-8540-9 6209 - 40 mm 

IEZ-8550-9 6209 - 50 mm 

IEZ-9030-9 6210 6308 30 mm 

IEZ-9040-9 6210 6308 40 mm 

IEZ-9050-9 6210 6308 50 mm 

IEZ-10030-9 6211 6309 30 mm 

IEZ-10040-9 6211 6309 40 mm 

IEZ-10050-9 6211 6309 50 mm 

IEZ-11030-9 6212 6310 30 mm 

IEZ-11040-9 6212 6310 40 mm 

IEZ-11050-9 6212 6310 50 mm 

IEZ-11060-9 6212 6310 60 mm 

IEZ-12040-9 6213 6311 40 mm 

IEZ-12050-9 6213 6311 50 mm 

IEZ-12060-9 6213 6311 60 mm 

IEZ-12070-9 6213 6311 70 mm 

IEZ-12540-9 6214 - 40 mm 

IEZ-12550-9 6214 - 50 mm 

IEZ-12560-9 6214 - 60 mm 

IEZ-12570-9 6214 - 70 mm 

IEZ-13040-9 6215 6312 40 mm 

IEZ-13050-9 6215 6312 50 mm 

IEZ-13060-9 6215 6312 60 mm 

IEZ-13070-9 6215 6312 70 mm 

IEZ-14040-9 6216 6313 40 mm 

IEZ-14050-9 6216 6313 50 mm 

IEZ-14060-9 6216 6313 60 mm 

IEZ-14070-9 6216 6313 70 mm 

IEZ-15040-9 6217 6314 40 mm 

IEZ-15050-9 6217 6314 50 mm 

IEZ-15060-9 6217 6314 60 mm 

IEZ-15070-9 6217 6314 70 mm 

IEZ-16040-9 6218 6315 40 mm 

IEZ-16050-9 6218 6315 50 mm 

IEZ-16060-9 6218 6315 60 mm 

IEZ-16070-9 6218 6315 70 mm 

IEZ-17050-9 6219 6316 50 mm 

IEZ-17060-9 6219 6316 60 mm 

IEZ-17070-9 6219 6316 70 mm 

IEZ-17080-9 6219 6316 80 mm 

IEZ-18050-9 6220 6317 50 mm 

IEZ-18060-9 6220 6317 60 mm 

IEZ-18070-9 6220 6317 70 mm 

IEZ-18080-9 6220 6317 80 mm 

IEZ-19050-9 6221 6318 50 mm 


IEZ-19060-9 6221 6318 60 mm 

IEZ-19070-9 6221 6318 70 mm 

IEZ-19080-9 6221 6318 80 mm 

IEZ-20050-9 6222 6319 50 mm 

IEZ-20060-9 6222 6319 60 mm 

IEZ-20070-9 6222 6319 70 mm 

IEZ-20080-9 6222 6319 80 mm 

IEZ-20090-9 6222 6319 90 mm 

IEZ-21560-9 6224 6320 60 mm 

IEZ-21570-9 6224 6320 70 mm 

IEZ-21580-9 6224 6320 80 mm 

IEZ-21590-9 6224 6320 90 mm 

IEZ-215100-9 6224 6320 100 mm 

IEZ-22560-9 - 6321 60 mm 

IEZ-22570-9 - 6321 70 mm 

IEZ-22580-9 - 6321 80 mm 

IEZ-22590-9 - 6321 90 mm 

IEZ-225100-9 - 6321 100 mm 

IEZ-23060-9 6226 - 60 mm 

IEZ-23070-9 6226 - 70 mm 

IEZ-23080-9 6226 - 80 mm 

IEZ-23090-9 6226 - 90 mm 

IEZ-230100-9 6226 - 100 mm 

IEZ-24070-9 - 6322 70 mm 

IEZ-24080-9 - 6322 80 mm 

IEZ-24090-9 - 6322 90 mm 

IEZ-240100-9 - 6322 100 mm 

IEZ-25070-9 6228 - 70 mm 

IEZ-25080-9 6228 - 80 mm 

IEZ-25090-9 6228 - 90 mm 

IEZ-250100-9 6228 - 100 mm 

IEZ-250110-9 6228 - 110 mm 

IEZ-26070-9 - 6324 70 mm 

IEZ-26080-9 - 6324 80 mm 

IEZ-26090-9 - 6324 90 mm 

IEZ-260100-9 - 6324 100 mm 

IEZ-260110-9 - 6324 110 mm 

IEZ-27070-9 6230 - 70 mm 

IEZ-27080-9 6230 - 80 mm 

IEZ-27090-9 6230 - 90 mm 

IEZ-270100-9 6230 - 100 mm 

IEZ-270110-9 6230 - 110 mm 

IEZ-28080-9 - 6326 80 mm 

IEZ-28090-9 - 6326 90 mm 

IEZ-280100-9 - 6326 100 mm 

IEZ-280110-9 - 6326 110 mm 

IEZ-280120-9 - 6326 120 mm 

IEZ-29080-9 6232 - 80 mm 

IEZ-29090-9 6232 - 90 mm 

IEZ-290100-9 6232 - 100 mm 

IEZ-290110-9 6232 - 110 mm 

IEZ-290120-9 6232 - 120 mm 

IEZ-30080-9 - 6328 80 mm 

IEZ-30090-9 - 6328 90 mm 

IEZ-300100-9 - 6328 100 mm 

IEZ-300110-9 - 6328 110 mm 

IEZ-300120-9 - 6328 120 mm 

IEZ-310120-9 6234 6424 120 mm 

IEZ-320120-9 6236 6330 120 mm 

IEZ-340120-9 6238 6332 120 mm 

IEZ-360120-9 6240 6334 120 mm 

IEZ-380120-9 - 6336 120 mm 

IEZ-400120-9 6244 6338 120 mm 

28 


Phone: 800.774.4643 • Fax: 800.768.9782 

EZE-SLEEVE ® STEEL SHAFT REPAIR SLEEVES 

Part Bearing Sleeve Sleeve 

No. No. Bore Length 

EZS-1000-2 00 8 mm 25 mm 

EZS-1000-3 00 7 mm 25 mm 

EZS-1201-2 01 10 mm 25 mm 

EZS-1201-3 01 9 mm 25 mm 

EZS-1502-2 02 13 mm 25 mm 

EZS-1502-3 02 12 mm 25 mm 

EZS-1603-2 03 14 mm 25 mm 

EZS-1603-3 03 13 mm 25 mm 

EZS-1703-2 03 15 mm 25 mm 

EZS-1703-3 03 14 mm 25 mm 

EZS-2004-2 04 18 mm 50 mm 

EZS-2004-3 04 17 mm 50 mm 

EZS-2505-2 05 23 mm 50 mm 

EZS-2505-3 05 22 mm 50 mm 

EZS-3006-2 06 28 mm 50 mm 

EZS-3006-3 06 27 mm 50 mm 

EZS-3507-2 07 33 mm 50 mm 

EZS-3507-3 07 32 mm 50 mm 

EZS-4008-2 08 38 mm 50 mm 

EZS-4008-3 08 37 mm 50 mm 

EZS-4509-2 09 43 mm 50 mm 

EZS-4509-3 09 42 mm 50 mm 

EZS-5010-2 10 48 mm 50 mm 

EZS-5010-3 10 47 mm 50 mm 

EZS-5010-4 10 46 mm 50 mm 

EZS-5511-2 11 53 mm 50 mm 

EZS-5511-3 11 52 mm 50 mm 

EZS-5511-4 11 51 mm 50 mm 

EZS-6012-2 12 58 mm 50 mm 

EZS-6012-3 12 57 mm 50 mm 

EZS-6012-4 12 56 mm 50 mm 

EZS-6513-2 13 63 mm 50 mm 

EZS-6513-3 13 62 mm 50 mm 

EZS-6513-4 13 61 mm 50 mm 

EZS-7014-2 14 68 mm 75 mm 

EZS-7014-3 14 67 mm 75 mm 

EZS-7014-4 14 66 mm 75 mm 

EZS-7415-2 15 73 mm 75 mm 

Part Bearing Sleeve Sleeve 

No. No. Bore Length 

EZS-7415-3 15 72 mm 75 mm 

EZS-7415-4 15 71 mm 75 mm 

EZS-8016-2 16 78 mm 75 mm 

EZS-8016-3 16 77 mm 75 mm 

EZS-8016-4 16 76 mm 75 mm 

EZS-8517-2 17 83 mm 75 mm 

EZS-8517-3 17 82 mm 75 mm 

EZS-8517-4 17 81 mm 75 mm 

EZS-9018-2 18 88 mm 75 mm 

EZS-9018-3 18 87 mm 75 mm 

EZS-9018-4 18 86 mm 75 mm 

EZS-9519-2 19 93 mm 75 mm 

EZS-9519-3 19 92 mm 75 mm 

EZS-9519-4 19 91 mm 75 mm 

EZS-10020-2 20 98 mm 75 mm 

EZS-10020-3 20 97 mm 75 mm 

EZS-10020-4 20 96 mm 75 mm 

EZS-10521-2 21 103 mm 75 mm 

EZS-10521-3 21 102 mm 75 mm 

EZS-10521-4 21 101 mm 75 mm 

EZS-11022-2 22 108 mm 75 mm 

EZS-11022-3 22 107 mm 75 mm 

EZS-11021-4 22 106 mm 75 mm 

EZS-12024-2 24 118 mm 75 mm 

EZS-12024-3 24 117 mm 75 mm 

EZS-12024-4 24 116 mm 75 mm 

EZS-13026-2 26 128 mm 75 mm 

EZS-13026-3 26 127 mm 75 mm 

EZS-13026-4 26 126 mm 75 mm 

EZS-14028-2 28 138 mm 100 mm 

EZS-14028-3 28 137 mm 100 mm 

EZS-14028-4 28 136 mm 100 mm 

EZS-15030-2 30 148 mm 100 mm 

EZS-15030-3 30 147 mm 100 mm 

EZS-15030-4 30 146 mm 100 mm 

EZS-16032-2 32 158 mm 100 mm 

EZS-16032-3 32 157 mm 100 mm 

EZS-16032-4 32 156 mm 100 mm 

Advantages: 

• Improve turnaround 

time 

• Precision bored on 

inside 

• Excellent resistance 

against normal stress 

exerted on bearing 

surface 

• No stress or porosity 

induced on shaft due to 

welding 

• Environmentally safe 

•SAE 1020 steel 


Installation procedures can be provided. Contact your Essex Brownell sales representative. 


Phone: 800.774.4643 • Fax: 800.768.9782 

TOLERANCE RINGS 

Tolerance rings are a quick and easy method of rebuilding bearing housings. Simply determine 

the bearing series or width and O.D. of the bearing and select the tolerance ring. Check the 

maximum radial load rating. Keep in mind, over-hung loads as in a belt drive application can 

increase radial load by as much as 30%. Bore the housing the recommended bore. Install the 

tolerance ring in the housing and assembly as usual. To avoid damage to the bearing or tolerance 

ring, the housing must be kept square with the shaft at all times. 

Recommended Maximum 

Part# Bearing Size Bearing OD Bearing Width Housing Bore Radial Load 

(inches) (inches) (inches) (lbs.) 

TR6200 200 1.811 .3543 1.259/1.257 980 

TR6201 201 1.2598 .3937 1.338/1.336 670 

TR6202 202 / 300 1.3780 .4331 1.456/1.454 820 

TR6301 301 1.4567 .4724 1.5347/1.5327 940 

TR6203 203 1.5748 .4724 1.653/1.651 1000 

TR6302 302 1.6535 .5118 1.731/1.729 1200 

TR6204 204 / 303 1.8504 .5512 1.928/1.926 1400 

TR6205 205 / 304 2.0472 .5906 2.145/2.143 1600 

TR6206 206 / 305 2.4409 .6299 2.538/2.536 2000 

TR6207 207 2.8346 .6693 2.9129/2.9119 2900 

TR6306 306 2.8346 .7480 2.9129/2.9119 3200 

TR6208 208 3.1496 .7087 3.2279/3.2269 3200 

TR6307 307 3.1496 .8226 3.2279/3.2269 3700 

TR6209 209 3.3465 .7480 3.4248/3.4238 3800 

TR6210 210 3.5433 .7874 3.6216/3.6206 4200 

TR6308 308 3.5433 .9055 3.6216/3.6206 4600 

TR6211 211 3.9370 .8268 4.0540/4.0520 4500 

TR6309 309 3.9370 .9843 4.0153/4.0143 4900 

TR6212 212 4.3307 .8661 4.4090/4.4080 5600 

TR6310 310 4.3307 1.0630 4.4090/4.4080 6400 

TR6213 213 4.7244 .9055 4.8027/4.8017 5200 

TR6311 311 4.7244 1.1417 4.8027/4.8017 7000 

TR6214 214 4.9213 .9449 4.9996/4.9986 6400 

TR6215 215 5.1181 .9843 5.1964/5.1954 7600 

TR6312 312 5.1181 1.2205 5.1964/5.1954 9400 

TR6216 216 5.5118 1.0236 5.5901/5.5891 8200 

TR6313 313 5.5118 1.2992 5.5901/5.5891 10800 

TR6217 217 5.9055 1.1024 5.9838/5.9828 8600 

TR6314 314 5.9055 1.3780 5.9838/5.9828 11600 

TR6218 218 6.2992 1.1811 6.3775/6.3765 9300 

TR6315 315 6.2992 1.4567 6.3755/6.3765 12300 

TR6316 316 6.6929 1.5354 6.7712/6.7702 15500 

TR6317 317 7.0866 1.6142 7.1649/7.1639 16400 

TR6318 318 7.4803 1.6929 7.5586/7.5576 17300 

300 Series Bearings are slightly wider. Not intended for use on vertical shaft motors. Radial load capacity is 

generally equivalent to that specified for the bearing. 

30 


Phone: 800.774.4643 • Fax: 800.768.9782 

WAVY SPRING WASHERS 

Used to eliminate endplay in electric motors, and preload the bearings to 

reduce the possibility of bearing damage due to vibration and repetitive and 

non-repetitive runout. 

Wavy spring washers are 

supplied in three styles: 

Bearing Bearing O.D. I.D. Preload 

O.D.--MM Series A (IN.) C (IN.) Style In LB. Part # 

10 R2 0.367 0.265 A 2 To 4 BSW-2 

13 R2A, R3 0.492 0.35 A 3 To 5 BSW-3 

16 634 0.595 0.312 C 3 To 1 BRW-1100 

16 634, R4 0.618 0.44 A 3 To 5 BSW-4 

19 635, 636 0.728 0.344 C 4 To 8 BRW-1108 

19 635, 636, R4 0.734 0.531 A 4 To 7 BSW-5 

22 627, 608 0.846 0.453 C 3 To 7 BRW-1104 

22 627, 608, R6 0.855 0.65 A 4 To 7 BSW-6 

26 629, 6000 1.004 0.516 C 5 To 9 BRW-1116 

30 6200 1.164 0.688 C 9 To 13 BRW-1120 

30 6200 1.181 1.048 B 19 BSW-30 

32 6002, 6201 1.24 0.688 C 10 To 14 BRW-1124 

32 6002, 6201 1.26 1.127 B 20 BSW-32 

35 6003, 6202, 6300 1.36 0.814 C 11 To 15 BRW-1128 

35 6003, 6202, 6300 1.378 1.245 B 22 BSW-35 

37 6004, 6301 1.457 1.314 B 23 BSW-37 

40 6203 1.555 0.971 C 15 To 21 BRW-1132 

40 6203 1.555 1 C 31 To 39 BRW-1136 

40 6203 1.575 1.432 B 25 BSW-40 

42 6004, 6302 1.654 1.511 B 26 BSW-42 

47 6005, 6204, 6303 1.83 1.189 C 17 To 23 BRW-1140 

47 6005, 6204, 6303 1.85 1.707 B 29 BSW-47 

52 6205, 6304 2.047 1.897 B 32 BSW-52 

62 6008, 6206, 6305 2.441 2.263 B 38 BSW-62 

72 6207, 6306 2.835 2.646 B 44 BSW-72 

80 6010, 6208, 6307 3.15 2.961 B 49 BSW-80 

85 6209 3.346 3.113 B 52 BSW-85 

90 6011, 6210, 6308 3.543 3.31 B 56 BSW-90 

100 6013, 6211, 6309 3.937 3.704 B 62 BSW-100 

110 6014, 6212, 6310 4.331 4.098 B 68 BSW-110 

120 6213, 6311 4.724 4.491 B 74 BSW-120 

125 6214 4.921 4.688 B 77 BSW-125 

130 6017, 6215, 6312 5.118 4.885 B 80 BSW-130 

140 6018, 6216, 6313 5.512 5.279 B 86 BSW-140 

150 6217, 6314 5.906 5.672 B 91 BSW-150 

160 6218, 6315 6.299 6.066 B 99 BSW-160 

170 6219, 6316 6.693 6.46 B 105 BSW-170 

180 6220, 6317 7.087 6.711 B 111 BSW-180 

190 6221, 6318 7.48 7.105 B 117 BSW-190 

200 6222, 6319 7.874 7.499 B 123 BSW-200 

215 6224, 6320 8.465 8.089 B 133 BSW-215 

Note: Other sizes available. Call for availability. 

Style A 

Stamped steel wavy spring 

washers, stamped from 

sheets of spring steel then 

formed to create wavy 

design. Spring rate is lineal 

from 20% to 80% as spring 

washer is compressed. Made 

from high carbon steel. 

Style B 

Split edge formed wavy 

spring washers. Produced 

from edge winding flat wire 

resulting in a circular grain 

design that reduces the 

chance of breakage common 

with stamped spring design. 

Split ring design produces a 

constant and even spring 

rate through-out deflection. 

Made from carbon steel. 

Style C 

3 finger spring steel washers 

counteract noise, excess 

wear, endplay and vibration, 

especially at high speeds. 

They promote efficiency and 

smooth operation, reducing 

skidding wear on rotating 

parts. Made from high carbon 

steel. 


Phone: 800.774.4643 • Fax: 800.768.9782 

LOCK NUTS / LOCK WASHERS 

Bearing lock nuts and lock washers are used to hold bearings in place, and keep them there. 

Common applications are spherical roller bearings and angular contact bearings in vertical 

hollow shaft motors. 

LOCK WASHER 

LOCK WASHER 

BEARING LOCK WASHERS 

Part# 

No. of Tangs 

BLW-W0 9 

BLW-W1 9 

BLW-W2 11 

BLW-W3 11 

BLW-W4 11 

BLW-W5 13 

BLW-W6 13 

BLW-W7 15 

BLW-W8 15 

BLW-W9 17 

BLW-W10 17 

BLW-W11 17 

BLW-W12 17 

BLW-W13 19 

BLW-W14 19 

BLW-W15 19 

BLW-W16 19 

BLW-W17 19 

BLW-W18 19 

BLW-W19 19 

BLW-W20 19 

BLW-W21 19 

BLW-W22 19 

BLW-W24 19 

BLW-W26 19 

BLW-W28 19 

BLW-W30 19 

BLW-W32 19 

BLW-W34 19 

BLW-W36 19 

BLW-W38 19 

BLW-W40 19 

BEARING LOCK NUTS 

Threads 

Major No. Per Outside 

Part# Dia. d Min In. K 1 Dia. C Max. 

BLN-N0 0.391 32 0.755 

BLN-N1 0.469 32 0.880 

BLN-N2 0.586 32 1.005 

BLN-N3 0.664 32 1.130 

BLN-N4 0.781 32 1.380 

BLN-N5 0.969 32 1.568 

BLN-N6 1.173 18 1.755 

BLN-N7 1.376 18 2.068 

BLN-N8 1.563 18 2.255 

BLN-N9 1.767 18 2.536 

BLN-N10 1.967 18 2.693 

BLN-N11 2.157 18 2.974 

BLN-N12 2.360 18 3.161 

BLN-N13 2.548 18 3.380 

BLN-N14 2.751 18 3.630 

BLN-AN15 2.933 12 3.880 

BLN-AN16 3.137 12 4.161 

BLN-AN17 3.340 12 4.411 

BLN-AN18 3.527 12 4.661 

BLN-AN19 3.730 12 4.943 

BLN-AN20 3.918 12 5.193 

BLN-AN21 4.122 12 5.443 

BLN-AN22 4.325 12 5.724 

BLN-AN24 4.716 12 6.130 

BLN-AN26 5.106 12 6.755 

BLN-AN28 5.497 12 7.099 

BLN-AN30 5.888 12 7.693 

BLN-AN32 6.284 8 8.068 

BLN-AN34 6.659 8 8.661 

BLN-AN36 7.066 8 9.068 

BLN-AN38 7.472 8 9.474 

BLN-AN40 7.847 8 9.849 

32 


Phone: 800.774.4643 • Fax: 800.768.9782 

THREAD LOCKING – Anaerobics 

Adhesive Systems Torque 21 TL - Low strength threadlocking, Ideal for small screws 1/4" 

and smaller. Controlled lubricity for accurate clamp loading. Easy disassembly. 

MIL-S-46163A, Type II, Grade M. 

Loctite # Color Viscosity Set Time Full Cure Torque Temp. Range 

222 Purple 1200 10 min 8hr 75/50 -60 to 350°F 

10 ML ASI-22TL-10MIL 50 ML ASI-22TL-50MIL 

Adhesive Systems Torque 42 TL - General Purpose, medium strength, removable. Ideal 

for fasteners 3/4" or smaller. Controlled lubricity, for accurate clamp loading. 

Mil-S-46163A, Type II, Grade N 


242 Blue 1200 10 mil 8 hr 150/75 -60 to 350°F 


Adhesive Systems Torque 71 TL - High Strength, permanent threadlocking. Ideal for fasternrs 

up to 1". MIL-S-46163, Type I, Grade K 


271 Red 500 10 mil 8 hr 250/350 -60 to 350°F 


Adhesive Systems Torque 77 TL - High Strength, permanent threadlocking. Higher viscosity for 

diameter over 1". MIL-S-46163A, Type II, Grade L. 


277 Red 7000 10 min 8 hr 275/375 -60 to 350°F 


Adhesive Systems Torque 90 TL - High strength, wicking grade. Ideal for post application to preassembled 

fasteners. Penetrates threads by capillary action. Secures screws, bolts, seals welds, 

porous metal parts. Mil-S-46163A, Type III, Grade R 


290 Green 12 10 mil 8 hr 150/275 -60 to 350°F 


RETAINING COMPOUNDS – Anaerobics 

Adhesive Systems Torque 09 RC - General Purpose, low viscosity retaining compound. Fixtures in 

under 10 minutes, providing shear strength up to 3,800 psi, works well on similar and dissimilar 

metals. Tempreature resistance to 350 deg. Mil-R-46082B, Type I. 

Loctite # Color Viscosity Gap Fill Set Time Full Cure Torque Temp. Range 

609 Green 125 0.005 15 min 8 hr 3800 psi -65 to 350°F 

10 ML ASI-09RC-10MIL 50 ML ASI-09RC-50MIL 

Adhesive Systems Torque 80 RC - High Strength for slip fitted parts. 4,200 psi. Fixtures in under 

five minutes with gap filling up to .015. 


680 Green 1400 0.015 5 min 8 hrs 4200 psi -65 to 350°F 


Adhesive Systems Torque 20 RC - High Strength, high temperature retaining compound. Shear 

strength up to 4,000 psi, radial clearance up to .015”. Fixtures in under 15 min. 


620 Green 8500 0.015 5 min 8 hrs 4000 psi -65 to 450°F 



Phone: 800.774.4643 • Fax: 800.768.9782 

SNAP RINGS 

Avaiable in Beryllium Copper only. 

Crossover Chart 

Anderton N1400 

IRR 3100 

Rotor Clip SH 

Military 16624 

Ring Size 

Shaft Diameter Free Diameter Thickness 

Precision Part # Decimal Fraction D Tolerance Thickness Tolerance 

ESR-5100-050 .500 1/2 .461 +.002 / -.005 .035 +/-.002 

ESR-5100-062 .625 5/8 .579 +.005 / -.010 .035 +/-.002 

ESR-5100-075 .750 3/4 .693 +.005 / -.010 .042 +/-.002 

ESR-5100-081 .812 13/16 .751 +.005 / -.010 .042 +/-.002 

ESR-5100-087 .875 7/8 .810 +.005 / -.010 .042 +/-.002 

ESR-5100-100 1.000 1 .925 +.005 / -.010 .042 +/-.002 

ESR-5100-112 1.125 1-1/8 1.041 +.010 / -.015 .050 +/-.002 

ESR-5100-118 1.188 1-3/16 1.098 +.010 / -.015 .050 +/-.002 

ESR-5100-137 1.375 1-3/8 1.272 +.010 / -.015 .050 +/-.002 

ESR-5100-156 1.562 1-9/16 1.446 +.013 / -.025 .062 +/-.003 

ESR-5100-162 1.625 1-5/8 1.503 +.013 / -.025 .062 +/-.003 

ESR-5100-177 1.772 1.637 +.013 / -.025 .062 +/-.003 

ESR-5100-187 1.875 1-7/8 1.735 +.013 / -.025 .062 +/-.003 

ESR-5100-200 2.000 2 1.850 +.013 / -.025 .062 +/-.003 

ESR-5100-212 2.125 2-1/8 1.964 +.015 / -.025 .078 +/-.003 

ESR-5100-237 2.375 2-3/8 2.197 +.015 / -.025 .078 +/-.003 

ESR-5100-255 2.559 2.377 +.020 / -.030 .078 +/-.003 

ESR-5100-275 2.750 2-3/4 2.543 +.020 / -.030 .093 +/-.003 

ESR-5100-287 2.875 2-7/8 2.659 +.020 / -.030 .093 +/-.003 

ESR-5100-315 3.156 3-5/32 2.920 +.020 / -.030 .093 +/-.003 

ESR-5100-334 3.346 3-11/32 3.092 +.020 / -.030 .093 +/-.003 

ESR-5100-354 3.543 3.277 +.020 / -.030 .109 +/-.003 

ESR-5100-375 3.750 3-3/4 3.468 +.020 / -.030 .109 +/-.003 

ESR-5100-393 3.938 3-15/16 3.642 +.020 / -.030 .109 +/-.003 

ESR-5100-475 4.750 4-3/4 4.458 +.020 / -.030 .109 +/-.003 

ESR-5100-700 7.00 7 6.570 +.050 / -.130 .156 +/- .005 

34 


Phone: 800.774.4643 • Fax: 800.768.9782 

SHAFT GROUNDING BRUSHES 

A Leading Cause of Bearing Fatigue & Failure 

Helwig's Shaft Grounding Assembly is your effective, inexpensive safeguard against shaft 

currents -- a common damaging problem in DC motors, particularly those with static SCR drives. 

Static and induced currents in DC motor shafts usually seek a path to ground through the motor 

bearing. Over time, electrical pits can develop on bearing components. These pits can eventually 

produce deep, well-defined flutes on inner and outer races and balls or rollers. The result? Noise, 

vibration and premature bearing failure. Any motor, large or small, is susceptible. 

Shunts Shaft Currents Safely to Ground 

Installed on a motor’s drive and bearings, Helwig’s Shaft Grounding Assembly effectively shunts 

static and induced shaft currents away from the bearing to minimize the potential for problems. 

The Assembly’s constant-force spring ensures proper electrical contact between grounding 

brush and motor shaft at all times for continuous bearing protection. And the silver graphite 

grounding brush maintains the lowest contact drop, so shaft voltages stay at safe minimum levels 

near zero. 

Fast, Easy Brush Changes Cut Maintenance Time 

Changing grounding brushes is quick and simple with the Helwig Shaft Grounding Assembly. 

There's no fumbling with awkward coil springs and Screw-on caps. To replace a brush, simply 

squeeze the spring clip assembly, lift it up and tilt it back. Remove the old brush and insert a new 

one. Slide the spring clip back down until it snaps in place, and you're done. 

Designed for Direct Replacement of Existing Assemblies 

Helwig's Shaft Grounding Assembly replaces General Electric and other types of grounding 

brushes and holders currently used. And it's an essential replacement offering a lower voltage 

drop over makeshift “solutions” such as grounding straps and braids. Safeguard your motor 

bearings against shaft current damage. Install the proven, positive protection of Helwig Shaft 

Grounding Assemblies today. 

Electical arcing on inner ring 

raceway of a single row 

deep groove ball bearing 

Assembly Part Number: 

SGA-1 

Replacement Brush Part Number: 10-372571 

Electric Arcing 

Electric arcing is material melted locally to form fluting or groove like corrugations 

Causes 

Electrical current passes through the bearing and sparks generated melt the raceway. 

Electrical arcing on outer 

ringer raceway of a single 

row deep groove ball bearing 

Couter Measures 

Eliminate the flow of electric current through the bearing by grounding or insulating. 


Phone: 800.774.4643 • Fax: 800.768.9782 

Sleeve 

Copper Alloy Tip 

Lead Length 

Case Length 

4” (102 mm) 

Lead Length 

Armor Option 

Case Length 

TIP-SENSITIVE RTD’S 

• Copper alloy tip for fast response 

• Accurate sensing to 260°C (500°F) 

• Non armor models can be user-shortened 

The sensing tip of these probes is constructed of copper alloy, twenty times more conductive than 

stainless steel. Sensors react more quickly to changes and indicate tip temperature instead of 

stem temperature. The result: Better accuracy in thermowells, bearings, and other installations. 

0.250" diameter is recommended for use in thermowells. 

Specifications 

Temperature range: -50 to 260°C (-58 to 500°F). 

Case: Stainless steel with copper alloy tip. 

Minimum case length: Single element probes: 2.8" (71.1 mm). 

Dual element probes: 4.0" (101.6 mm). 

Maximum case length: 48" (1220 mm), longer on special order. 

Leads: 2, 3, or 4 leadwires, stranded copper with PTFE insulation. AWG 22, except 0.188" diameter 

dual probes AWG 24. For 2-lead RTDs add 0.03 per foot (0.05 Ω per foot for 0.188" diameter dual 

probes) of combined case and lead length to element tolerance. Copper (CA, CC) models must 

have 3 leads. 

Time constant: 2.0 seconds typical in moving water. 3.0 seconds for dual element models. 

Pressure rating: 100 psi (6.9 bar). 

Insulation resistance: Single element probes: 1000 megohms min. at 500 VDC, leads to case. 

Dual element probes: 100 megohms min. at 100 VDC, between elements and leads to case. 

Vibration: Withstands 10 to 2000 Hz at 20 G’s min. per MIL-STD-202, Method 204, Test Condition D. 

Shock: Withstands 100 G’s min. sine wave shock of 8 milliseconds duration. 

TCR 

Model number for probe diameter: 

Element Ω/Ω/°C 0.188" 0.215" 0.250" 

(4.8 mm) (5.5 mm) (6.4 mm) 

Single element RTDs: No armor over leads 

Platinum, 100 ±0.5% at 0°C 0.00392 S54PA S51PA S53PA 

Platinum, 100 ±0.1% at 0°C 0.00385 S854PD S851PD S853PD 

(meets EN60751, Class B) 

Platinum, 100 ±0.5% at 0°C 0.00385 S884PE S881PE S883PE 

Copper, 10 ±0.2% at 25°C 0.00427 S54CA S51CA S53CA 

Nickel, 120 ±0.5% at 0°C 0.00672 S54NA S51NA S53NA 

Single element RTDs with armor over leads 

Add element code (Ex: S154NA, S153CA) S154__ S151__ S153__ 

Dual element RTDs: No armor over leads 

Platinum, 100 ±0.5% at 0°C 0.00392 S59PA S56PA S57PA 

Platinum, 100 ±0.1% at 0°C 0.00385 S859PD S856PD S857PD 

(meets EN60751, Class B) 

Platinum, 100 ±0.5% at 0°C 0.00385 S889PE S886PE S887PE 

Copper, 10 ±0.5% at 25°C 0.00427 N/A S56CC S57CC 

Nickel, 120 ±0.5% at 0°C 0.00672 S59NA S56NA S57NA 

Dual element RTDs with armor over leads 

Add element code (Ex: S159NA, S157CC) S159__ S156__ S157__ 

36 


Phone: 800.774.4643 • Fax: 800.768.9782 

MOTOR SHAFT FLINGERS 

Inexpensive rubber flingers fit snug on the shaft of electric motors to prevent water from creeping 

up the shaft into the housing damaging bearings and other components of the motor. 

"A" "B" "C" Photo Part 

Inside Dia. Shoulder Dia. Outside Dia. Ref. Number 

(IN.) (IN.) (IN.) 

1/2 1-1/4 2-1/4 1 TER-4 

5/8 1-1/4 2-1/4 1 TER-5 

3/4 1-1/4 2-1/4 1 TER-6 

7/8 1-1/4 2 2 TER-7 

7/8 1-3/8 2 1 ER-7 

1-1/8 1-1/2 2-7/16 2 TER-9 

1-1/8 1-5/8 2-7/16 1 ER-9 

1-1/4 1-5/8 3 2 TER-11 

1-1/4 1-7/8 3 1 ER-11 

1-5/8 2-1/8 3-3/16 2 TER-13 

1-5/8 2-1/8 3-1/8 1 ER-13 

1-7/8 2-1/4 3-1/8 2 TER-15 

1-7/8 2-1/4 3-1/8 1 ER-15 

2-1/8 2-1/2 3-1/4 2 TER-17 

2-1/8 2-5/8 3-1/4 1 ER-17 

2-3/8 2-3/4 3-1/2 2 TER-19 

2-3/8 2-3/4 4-3/8 1 ER-19 

2-7/8 3-3/8 4-1/8 2 TER-23 

2-7/8 3-1/4 5-3/8 1 ER-23 

3-3/8 3-7/8 4-3/4 2 TER-27 

3-3/8 3-3/4 5-5/8 1 ER-27 


Phone: 800.774.4643 • Fax: 800.768.9782 

DOW CORNING INDUSTRIAL LUBRICANTS 

MOLYKOTE Bearing Greases From Dow Corning 

G-0010 Bearing Grease Polyurea 

Provides excellent corrosion resistance. Temp Range -20 to 340°F 

G-0101 Long Life Bearing Grease Lithium complex 

High speed bearing applications. Temp Range -5 to 300°F 

BR-2 Plus Multi-Purpose EP Grease 

Lithium soap, mineral oil with MoS2 

High load, extreme pressure, moderate speed applications. Temp Range -20 to 265°F 

BG-20 High Performance Synthetic Bearing Grease 

Lithium complex, polyester 

High speed, high temp., and high loads. Temp Range -50 to 360°F 

G-4500 Multi-Purpose Synthetic Grease Synthetic NLGI#2 

Higher speeds, moderate loads. 

Application with possible incidental food contact. FDA 21 CFR 178.3570 Temp Range -60 to 325°F 

33 Extreme Low Temperature Bearing Grease Lithium soap, Silicone 

Light load instrument lubricant. Temp Range -100 to 400°F 

44 High Temperature Bearing Grease Lithium soap, Silicone 

Light to moderate loads. Temp Range -40 to 400°F 

41 Extreme High Temperature Bearing Grease Carbon Black thickened Silicone 

Moderate loads and speeds. Temp Range 0 to 550°F 

38 


Phone: 800.774.4643 • Fax: 800.768.9782 

DOW CORNING INDUSTRIAL LUBRICANTS 

Industrial Lubricants From Dow Corning 

G-n Metal Assembly Paste/Spray – Reduces friction and wear on parts during assembly and break-in. 

Breaking-in bearings, splines, gears, chains, threaded connections, press fitting. 

321 Dry Film Lubricant – Long-term dry lubrication where air drying formulation is desired. 

Lubricating gears, cutting tools, gear cutters, taps, drills, suited for dusty environments. 

557 Silicone Dry Film Lubricant – Lubrication of sliding contacts, particularly aluminum and stainless steel. 

Lubricating slitters, blades, tool and dies, taps and drills, slides, conveyors, tracks, handling equipment. 

L-0501 High-Performance Penetrating Oil and Lubricant 

Loosens rusted parts, inhibits corrosion and oxidation while providing long-term lubrication. NO Kerosene! 

Metal Protective Coating – Long-term corrosion protection. 

Protecting machined parts, stampings, raw stock, finished products, fixtures, tools, stored parts. 

P-37 UltraPure High Temperature Paste – Ultrapure paste for use on threaded connections. 

Prevents seizure and damage of threads during assembly and disassembly after exposure 

to extreme high heat. 

M-77 Part Assembly Paste – Part assembly, running in, press-fitting, lubricants for high temperatures. 

Lubricating during running-in of gears, splines, journal bearing. Reduces torque in tightening threads. 

1000 High Temperature Anti-Seize Paste – Multi-purpose paste for threaded connections. 

Lubricating threaded connectors exposed to severe environments. Rollers, oven chains, hinges. 


Phone: 800.774.4643 • Fax: 800.768.9782 

NOTES 

40 


Phone: 800.774.4643 • Fax: 800.768.9782 

BEARING TOOLS 

PORTABLE HYDRAULIC PULLEY PULLER..................................................................................42 

POSI LOCK PULLERS ..............................................................................................................43 

BALL BEARING INSTALLER KIT..................................................................................................44 

BALL BEARING PULLER ADAPTERS..........................................................................................44 

STANLEY COMPO-CAST ® HAMMERS........................................................................................44 

BEARING HEATERS......................................................................................................................45 

DAKE ARBOR PRESSES ........................................................................................................46-48 

IRD 206 VIBRATION METER ........................................................................................................49 

ACCUSHIM SHAFT HOG PRECISION LASER ALIGNMENT SYSTEM ....................................50 


Phone: 800.774.4643 • Fax: 800.768.9782 

PORTABLE HYDRAULIC PULLEY PULLER 

Portable and easy to operate, it quickly removes practically any object from 

a shaft. Sturdily constructed yet reasonably priced, it has added safety 

features like remote control and Quicklink Chain Attachment. Pressure is 

supplied to the hydraulic ram by either an easily operated hand pump or an 

electrically operated pump. Three simple adjustments set the puller to the 

dimensions required. The beam, arms, ram and pump can be removed from 

the puller stand for overhead or other special uses. Eliminates the need for 

crow bars, wedges, torches, etc. 

SPECIFICATIONS 

MAXIMUM MAXIMUM DIMENSIONS SHIP 

PULLER DIAMETER (IN.) FACE (IN.) H(IN.) W(IN.) L(IN.) WEIGHT 

8 Ton 22 24 40 26 36 140 lbs. 

20 Ton 32 36 42 34 48 460 lbs. 

60 Ton 42 48 48 46 60 820 lbs. 

100 Ton 48 48 48 46 60 1060 lbs. 

MODELS 

Part No. THP-8H 8 Ton Manual Hydraulic Puller complete with Quicklink Chain Attachment. 

Part No. THP-20H 20 Ton Manual Hydraulic Puller with Quicklink Chain Attachment and set of Ram 

Adapters. 

Part No. THP-60H 60 Ton Manual Hydraulic Puller with Quicklink Chain Attachment and set of Ram 

Adapters. 

Part No. THP-2OHEP 20 Ton Hydraulic Puller with Electric Pump, with Quicklink Chain Attachment 

and set of Ram Adapters. 

Part No. THP-6OHEP 60 Ton Hydraulic Puller with Electric Pump, with Quicklink Chain Attachment 

and set of Ram Adapters. 

Part No. THP-1OOHEP 100 Ton Hydraulic Puller with Electric Pump, with Quicklink Chain 

Attachment and set of Ram Adapters. 

ACCESSORIES 

Part No. THP-8Q Quicklink Chain for 8 ton model. 6' of 3/8" chain. 

Part No. THP-20Q Quicklink Chain for 20 ton models. 8' of 3/8" chain. 

Part No. THP-60Q Quicklink Chain for 60 ton models. 10' of 1/2" chain. 

Part No. THP-2OEPK 20 Ton Electric Pump Kit. * 

Part No. THP-6OEPK 60 Ton Electric Pump Kit. * 

Part No. THP-RA-20 Set of 10 Adapters for 20 ton models. 



*The electric pump is wired for 115V/10/60 Hz. This pump is available in easy-to-install kit form for 

adaptation to all 20, 50 and 60 ton pullers manufactured since 1945. 

FOB DAVENPORT, IOWA 

42 


Phone: 800.774.4643 • Fax: 800.768.9782 

POSI LOCK PULLERS 

The POSI LOCK patented cage design is simply the easiest and safest way to use a bearing 

Puller! The POSI LOCK line of quality manual gear and bearing pullers utilize a T-handle and 

Cage ® to control the jaws at all times. This means that the opening and closing, locking and 

aligning of the jaws is all done automatically by simply turning the T-handle. 

This style Puller can replace several other pullers required for special applications. Ask for a 

demonstration and discover the advantage the cage gives you! Long Arm Sets provide the ability 

to increase the reach & spread of your pullers to provide even more flexibility. Arms are easily 

interchangeable because ball lock pins are used to hold the arm in place. 

ADVANTAGES 

1. Roll center bolt threads are designed for less effort when applying high torque. 

2. Heat-treated tips. 

3. T-handle locks jaws precisely where you set them. 

4. Slim tapered jaws allow for better gripping and easier access in tight spots. 

5. Safety Cage ® guides jaws for fast set-up, solid contact and superior safety. 

6. Nut recessed to avoid mushrooming and disfiguring from impact. 

7. Leverage up front for positive grip, vise-like power and no slippage. 

8. Tip protectors and optional bolt extenders create a live center to fit on the center 

bolt for additional protection and added reach. 

Pullers 

Rating Reach Spread # of 

(In.) (In.) Arms Part Number 

2 Ton 4 1/2 - 5 2 TPP-204 

5 Ton 4 1/2 - 5 3 TPP-104 

6 Ton 6 1/2 - 7 2 TPP-206 

10 Ton 6 1/2 - 7 3 TPP-106 

12 Ton 8 3/4 - 12 2 TPP-208 

14 Ton 10 1 - 15 2 TPP-210 

17 Ton 8 3/4 - 12 3 TPP-108 

20 Ton 10 1 - 15 3 TPP-110 

25 Ton 12 2-1/2 - 18 2 TPP-213 

30 Ton 12 2-1/2 - 18 3 TPP-113 

35 Ton 14 3 - 25 2 TPP-216 

40 Ton 14 3 - 25 3 TPP-116 

Long Arm Sets 

Puller Reach Spread 

Model (In.) (In.) Part Number 

TPP-108 9-11/16” 2-1/4 - 15 TPP-L0 

TPP-208 9-11/16 2-1/4 - 15 TPP-L2 

TPP-110 15-3/4 1.5 - 22 TPP-L4 

TPP-210 15-3/4 1.5 - 22 TPP-L6 

TPP-113 20 1.5 - 30 TPP-L8 

TPP-213 20 1.5 - 30 TPP-L10 

TPP-116 25 2 - 38 TPP-L12 

TPP-216 25 2 - 38 TPP-L14 


Phone: 800.774.4643 • Fax: 800.768.9782 

BALL BEARING INSTALLER KIT 

Installs ball bearings fast and easy without damage to seals or flanges. Sleeves are made of steel, 

heat treated and hardened for use with arbor press or mallet, admium plated for protection 

against rust, and knurled for easy handling. Sleeve made about .025” larger than bore of bearing, 

and passes easily over shaft, providing a perfectly lined installation. Outside diameter fits inner 

race of bearing. Long enough to use on standard NEMA shaft extension. Ranges from 200 Series 

ball bearings (10mm I.D.) to 209 Series (45mm I.D.) Part No. TBI-10 Set of 10 sleeves for bearings 

10 to 45mm bore. 

TBI-2010 6200/6300 TBI-2510 6205/6305 

TBI-2110 6201/6301 TBI-2610 6206/6306 

TBI-2210 6202/6302 TBI-2710 6207/6307 

TBI-2310 6203/6306 TBI-2810 6208/6308 

TBI-2410 6204/6304 TBI-2910 6209/6309 

BALL BEARING PULLER ADAPTERS 

Where bearings are recessed and cannot be held by the separator, a specially 

designed set of Puller Adapters has been engineered. The carefully machined highgrade 

steel adapters can be slipped on the bearing in seconds; the adapter ring is 

then set to contain the bearing. The Adapter, with the bearing enclosed, is set into 

the separator holder for efficient removal of the bearing. The Ball Bearing Puller 

Adapters are made in the following 6 sizes. 

Part No. TGP-202 Adapter fits all "202" series bearings, having 35mm diameter ie. 202-3202-6202. 

Part No. TGP-203 Adapter fits all “203” series bearings, having 40mm diameter ie. 203-3203-6203. 





STANLEY COMPO-CAST ® HAMMERS 

The most versatile, durable, all-purpose hammer available. As thorough as it is gentle. The entire 

exterior surface is solid molded urethane, virtually indestructable. Outlasts rawhide, nylon, rubber, 

brass or lead by 10 to 20 times. All models feature dead blow heads for sustained impact and 

maximum striking force. Wrap around grip with flanged butt. No Mark - No Spark. 

STANDARD MODELS 

Part Face Head LENGTH 

number Dia.(IN.) Length(IN.) (IN.) Weight 

TCH-OHD 1 1/2 3 1/8 10 l4 oz. 

TCH-lHD 1 3/4 3 3/4 11 1 1/2 lbs. 

TCH-2HD 2 4 1/4 12 3/4 2lbs. 

TCH-3HD 2 1/2 4 3/4 14 3lbs. 

TCH-4HD 2 3/4 5 1/4 16 4 lbs. 

SLIMLINE MODELS 

TCH-O-XHD 1 3 9 1/2 8 ozs. 

TCH-X02-HD 11/4 4 1/4 10 1/2 11/2 lbs. 

TCH-X03-HD 11/2 41/4 12 11/2 lbs. 

TCH-Xi-HD 13/4 5 1/4 13 2 lbs. 

SLEDGE MODELS 

TCH-4HD-1 2 3/4 7 20 7 lbs. 

TCH-12HD 3 1/2 8 30 l2 lbs. 

TCH-14HD 3 1/2 8 36 14 lbs. 

44 


Phone: 800.774.4643 • Fax: 800.768.9782 

BEARING HEATERS 

Linmast Induction Bearing Heaters 

The Linmast induction bearing heaters are the most innovative heaters to hit the market! Their 

superior design is more accurate, safer to use, more efficient, and more cost effective than most 

competitive brands. With six models to choose from, you can order yours today and discover the 

difference! 

FEATURES: 

• Audible alarm notification • Digital temperature readout 

• Automatic demagnetization • Extremely simple operation 

• Safe method of heating • Programmable temperature setting 

• Six different models to choose from to cover a full range of bearing sizes 

• Comes with heat resistant gloves & additional cross bars 

MODEL 

DESCRIPTION 

TLBH-45C Induction Bearing Heater 1KVA, 110V, 18 lbs. max, additional cross bar: 9/16" x 9/16" 

TLBH-70C Induction Bearing Heater 2.2KVA, 110V, 66 lbs. Max, 2 additional cross bars: 

9/16"x9/16", 1"x1" 

TLBH-70C-220V Induction Bearing Heater 3.6KVA, 220V, 66 lbs. Max, 2 additional cross bars: 

9/16"x9/16", 1"x1" 

TLBH-90C Induction Bearing Heater 3.6KVA, 220V, 132 lbs. Max, 2 additional cross bars: 

13/16"x13/16", 1-3/16"x1-3/16" 

TLBH-90H Induction Bearing Heater 8.5KVA, 440V, 220 lbs. Max, 2 additional cross bars: 

13/16"x13/16", 1-3/16"x1-3/16" 

TLBH-120C Induction Bearing Heater 14KVA, 440V, 440 lbs. Max, 2 additional cross bars: 

1-9/16"x1-9/16", 2-3/8"x2-3/8" 

TLBH-120D Induction Bearing Heater 14KVA, 440V, 440 lbs. Max, additional cross bars N/A, 

twin-pole can heat 2 bearings at a time 

Reco Induction Bearing heater 

Part No. TRBH-805 Induction Bearing Heater. Includes set of 3 cross-bars listed in specs. 

ACCESSORIES: 

Part No. TRBH-1O Extra small bar used with 203 and 204 bearings size 1/2" x 1/2". 

Part No. TST-213 Tempilstik Temperature Rating Marker. Rated at 213ºF. 

Part No. TRBH-SC238 2-3/8" Raising Blocks. 

Cone Thermo Bearing Heaters 

Easy to use. Mark with Thermo Crayon. When crayon mark melts, slip bearing on shaft. Open, 

shielded and sealed bearings mounted without damage to lubricants. Safe, no danger of fire or 

explosion hazard. Heating time for small bearings is approximately two minutes, medium size five 

minutes, large bearings ten minutes or as required. 

SPECIFICATIONS: 

110 volts AC, 725 watts. Weight 8 lbs. Height 10". Mounts any bearing or gear with 3/4" to 8" bore. 

Comes complete with six foot heavy duty cord and switch, plus Thermo Crayon. Constructed of 

aluminum for fast heat transfer. Also available in 240V AC. 

Part No. TBH-160 Model B Bearing Heater for bearings to 5 3/4" bore. 

Part No. TBH-170 Model C Heavy Duty Bearing Heater for bearings to 5 3/4" bore. 

Part No. TBH-190 Model Super D Bearing Heater with temperature control for bearings to 8" bore. 


Phone: 800.774.4643 • Fax: 800.768.9782 

DAKE ARBOR PRESSES 

Single Leverage 

These Single Leverage Arbor Presses feature a shimmed ram cap, adjustable handle, and smooth 

action gears. They also have base opening and slotted table plates, pedestals, and table plates 

depending on the model. 

Models: X, Y, Pedestal Y, 00, 0, Pedestal 0, 1, Pedestal 1 

Features 

• Shimmed ram cap permits take-up for potential wear. 

• Adjustable handle allows convenient handle positioning. 

• Smooth action gears permit finite ram control. 

• Base opening and slotted table plate for arbor work (models X and Y have a solid plate). 

• Pedestals available for models Y, 0 and 1. 

• Table plate on models 00, 0 & 1. Solid table on models X & Y. 


capacity leverage ram size max work 

model number (tons) ratio (inches) diameter (inches) 

X 901001 1 25:1 1x1x7-1/2 7 

Y 901002 1-1/2 32:1 1x1x12 9 

Pedastal Y 901003 n/a n/a n/a n/a 

00 901004 1 25:1 1x1x7-1/2 7 

A B C D E F G 

model throat largest max ram to max ram to length width height 

(in) arbor (in) table (in) table plate (in) (in) (in) (in) 

X 3-1/2 n/a 4-1/2 n/a 4-1/4 9-1/2 9 

Y 4-1/2 n/a 7-3/4 n/a 6 15 14/1/2 

Pedastal Y n/a n/a n/a n/a 10 18 36 

00 3-1/2 1 5 4-1/2 4-1/4 9 9-3/8 

46 


Phone: 800.774.4643 • Fax: 800.768.9782 


Hand-Operated Hydraulic Presses 

The Dake hand-operated hydraulic presses offer economical performance. These presses provide 

the following features: 

Rapid ram return – starts as soon as release valve is opened and may be stopped at any point by 

closing the valve. 

By-pass hole – prevents excessive ram extension. 

Adjustable table – permits easy vertical movement by means of self-locking hoist. 

Rapid screw traverse of ram – permits quick, easy movement of the ram by means of a 

convenient handwheel. 

Moveable workhead – is roller mounted on ball bearings for off-center positioning (except 25H). 

Width Width Min Max Horizontal 

Between Between Ram to Ram to Ram Workhead Screw 

Uprights Channels Table Table Travel Travel Travel Base Height Weight 

Model Number Capacity A B C D E F JxK L 

25H 07001 25 33 1/2 5 3/16 4 39 5 5 42-1/2x30 76 450 

50H 07002 50 32 3/4 7 1/4 5 40 4 20 3/4 7 43-1/2x36 85 810 

75H 07003 75 44 8 1/4 6 36 4 1/2 29 5/8 7 55x36 87 1245 

125H 07004 125 48 12 1/8 5 25 8 27 1/4 8 66x42 95 2750 

Note: all measurements in inches except weight which is in pounds. 


Phone: 800.774.4643 • Fax: 800.768.9782 


Elec-draulic I Hydraulic Presses 

The Dake Elec-draulic I hydraulic presses are an advanced design, single-acting press with fingertip 

control. These presses provide the following features: 

Electric operation – provides smooth, consistent pressing action. 

Single-acting cylinder – provides fast, reliable pressing and internal spring return. 

Rapid ram approach – quickly moves ram to work to save production time. 

Rapid ram speed – allows fingertip control of ram movement for precise pressure control. 

Rapid ram return – starts ram return as soon as release valve is opened and may be stopped at 

any point by closing the valve. 

Moveable workhead – is roller mounted on ball bearings for off-center work. 

Safety valve – protects against overloads. 

Stroke indicator – ensures accurate ram control. 

Adjustable table – permits easy vertical movement by means of self-locking hoist. 

Models 

Ram Speed (inches per minute) 

Model Number Capacity (tons) Hoursepower RPM Advance Press 

5-025 05025 25 2 1800 80 14 

5-050 05050 50 2 1800 40 7 

5-075 05075 75 2 1800 28 5 

5-150 05150 150 2 1800 16 2 3/4 

5-200 05200 200 3 1800 16 2 3/4 


Width Width Min Max Horizontal 

Between Between Ram to Ram to Ram Workhead 

Uprights Channels Table Table Travel Travel Base Height Weight 

Model A B C D E F JxK L 

5-025 32 3/4 7 1/4 5 40 10 14 3/8 43-1/2x36 85 1000 

5-050 32 3/4 7 1/4 5 40 10 14 3/8 43-1/2x36 87 1320 

5-075 44 8 1/4 6 36 10 24 55-1/2x36 86 1650 

5-150 48 12 1/4 10 30 16 22 1/8 66x42 95 3000 

5-200 48 18 1/4 6 30 16 22 1/8 64x48 100 4380 

Note: all measurements in inches except weight which is in pounds. 

48 


Phone: 800.774.4643 • Fax: 800.768.9782 

IRD 206 VIBRATION METER 

The IRD Balancing Model 206 Vibration Meter is a hand held, battery powered vibration meter 

available in either metric or imperial versions. The meter is capable of measuring the overall 

amplitude of vibration and displaying the result in units of Velocity (mm/s or in/s) or Acceleration 

(g peak). The unit is supplied with a protective carrying pouch and includes an accelerometer, 

extension probe and 1.2 meter connecting cable. The vibration meter is powered by an internal 9 

Volt (PP3) battery. 

The Model 206 is rugged and easy to use. It is ideally suited to workshop and remote site use. The 

meter automatically switches off after approximately one minute to preserver battery life. The unit 

displays a warning sympbol on the display screen when the battery requires replacement. 

There is an internal test function to check the integrigty of the sensing probe, this tests the 

transducer bias voltage to ensure that it is within the speicified range. 

Frequency Range: 

Range: 

Meter Size: 

Weight: 

Power: 

Battery Life: 

Vibration Probe: 

Weight: 

Sensitivity: 

Part Numbers: 

10 Hz – 1 kHz 

0-50 mm/s pk or 0-2 in/s pk, 0-20g pk 

125mm x 80mm x 25mm 

180g 

9v battery (pp3) 

30 hours typical dependant on usage and battery type. 

Piezo electric accelerometer 

172g 

100mv/g 

E48505M Model 206 Vibration Meter (complete package - Metric units) 

E48505 Model 206 Vibration Meter (complete package - Imperial units) 

Spare Parts: E48504 Handheld vibration probe (accelerometer) for 206 

E48503 Probe spike stainless steel 

E43500 Connecting cable BNC to BNC 0.9m 


Phone: 800.774.4643 • Fax: 800.768.9782 

ACCUSHIM INC. 

SHAFT HOG Precision LASER Shaft Alignment System 

The Shaft Hog puts laser alignment accuracy within reach of everyone! 

• REDUCE MACHINERY VIBRATION 

• LONGER BEARING LIFE 

• LONGER SEAL LIFE 

• FAST AND EASY ALIGNMENTS 

The ergonomically designed control unit fits comfortably in one hand. The live display 

means that you will get instant feedback when shimming or moving the machines. This 

eliminates the guesswork and back and forth you're suffering through now. All of this at an 

affordable price that means a quick payback. 

TECHNICAL DATA 

MEASURING UNITS 

Housing material 

Type of laser 

Laser wave length 

Laser class 2 

Max laser power 

Max distance between measuring units 

Type of detectors 

Cable length 

Dimensions 

DISPLAY UNIT 

Housing material 

Display type 

Battery type 

Operating time 

Auto power off 

ABS plastic 

Diode laser 

670 – 675 nm 

1 mW 

2.8 ft (850mm) 

Single-axis PSD 

5.2 ft (1.6m) 

3.4 x 3.1 x 1.5 in 

(87x79x39mm) 

ABS plastic 

LCD 1.4 x 1.9 in (35x48mm) 

2x1.5V "C" Alkaline (LR14) 

20 hours continuous 

After 1 hour if no activity 

Display Resolution 0.1 mil (0.0001") 

(0.01 mm in metric mode) 

Dimensions 

9.1 x 3.2 x 2.4 in (230x81x62mm) 

COMPLETE SYSTEM 

Shaft diameter range with chain 

Accuracy of system 

Temperature range 

Operating humidity 

Weight in case 

20" maximum 

Phone: 800.774.4643 • Fax: 800.768.9782 

NOTES 

51

Phone: 800.774.4643 • Fax: 800.768.9782 

© 2006 Superior Essex Inc. 

01/06 90639

BEARINGS - Superior Essex

Create successful ePaper yourself

Delete template?

Save as template?