HP BladeSystem c3000 Enclosure - eD' system Czech, as

QuickSpecs 

HP BladeSystem c3000 Enclosure 

Overview 

HP BladeSystem c3000 Enclosure - Rack - Front View HP BladeSystem c3000 Enclosure - Rack - Rear View 

1. Device Bays 1 thru 8 1. Local KVM interface 

2. Enclosure DVD Drive 2. Interconnect Bay 1 

3. Standby Onboard Administrator 3. Active Cool Fans 

4. Insight Display 4. Interconnect Bay 2 

5. Active Onboard Administrator 5. Enclosure Up-link and Service Port 

6. Enclosure Down-link 

7. iLO/Onboard Administrator Port 

8. iLO/Onboard Administrator Port 2 (reserved for future) 

9. Power Supplies 

10. Interconnect Bay 4 

11. Interconnect Bay 3 

HP BladeSystem c3000 Platinum Enclosure 

Intelligent Infrastructure 

1200W Platinum Hot Plug Power Supply (80 Plus certified) 

Power Discovery Services 

Support for HP Insight Control 7.2 and higher releases 

NOTE: HP BladeSystem c3000 Platinum enclosures are compatible with existing c-Class infrastructures. HP c-Class 

enclosures are backwards compatible. For more information on interconnects please go to c-Class Interconnects 

At A Glance 

This document covers the HP BladeSystem c3000 enclosure only. For more information on the HP c7000 enclosure, the 

HP ProLiant Server Blades, and HP BladeSystem c-Class Interconnect and Mezzanine Components please see the 

following: 

HP c7000 Enclosure: HP ProLiant Server Blades: 

http://h18000.www1.hp.com/products/quickspecs/division/12534.html 

HP BladeSystem c7000 Enclosure QuickSpecs: 

http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html 

HP BladeSystem c-Class Interconnect and Mezzanine Components: 

http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html 

http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html 

HP BladeSystem solutions start with a either a c7000 or c3000 Enclosure. For the c3000 Enclosure, customers can add 

c3000 Platinum power supplies, Active Cool Fans, a c3000 DVD drive, and if needed, an optional local KVM module. Once 

the enclosure has been selected, the following components can be added: networking interconnect modules, HP ProLiant 

DA - 12790 Worldwide QuickSpecs — Version 52 — 3.15.2013 Page 1

QuickSpecs 


Overview 

and Integrity Server Blades, and optional Insight Control for BladeSystem management software. Please reference the 

QuickSpecs listed above. 

HP BladeSystem c3000 Enclosures: 

The c3000 Enclosure for racking in standard 19 inch racks. Server blades (excluding the BL 2x220c G6), storage 

blades, interconnect modules, power supplies, fans, and Onboard Administrator modules are designed to fit into the 

c3000 enclosure. 

HP BladeSystem c3000 enclosure options: 

A single-phase enclosure available worldwide for use with in-rack PDUs & UPSs which accept C13/C14 power 

cords; or 

Alternatively, in countries with low-line (100VAC to 110VAC) power outlets, the enclosure's power supplies can 

be connected directly to low-line wall outlets. 

NOTE: Caution: when connecting directly to wall outlets, customers should determine the maximum amperage 

of the wall outlet circuit to prevent power overload. See Technical specification section in this document for the 

individual power supply amperage. 

HP BladeSystem c3000 enclosure options: 

Optional HP 1200W Common Slot Platinum Hot Plug Power Supply Kit (up to 6 total) 

Optional c-Class Active Cool fans (between 4 and 6 total) 

Optional KVM module 

Optional DVD drive (if not part of an enclosure bundled part number) 

Optional HP 1200W Common Slot -48VDC Hot Plug Power Supply Kit (up to 6 total) 

The c3000 enclosure is 6U and holds up to 8 HP c-Class server blades: 

Up to 8 half-height server blades or 4 full-height server blades, please visit: 

http://h10010.www1.hp.com/wwpc/us/en/sm/WF02d/3709945-3709945-3328410.htmldnr=1 

Up to 4 PCI Expansion blades attached to half-height server blades 

Or combinations of the above. 

For additional server & storage blade information, please visit: 


Types of interconnect modules available: (up to 4 per enclosure) 

Ethernet Interconnect Switches from HP Networking, Cisco & Blade Network Technologies (BNT) 

Ethernet Pass-Thru modules 

Virtual Connect Ethernet modules (requires VC Management firmware v1.20 or greater) 

Fibre Channel Interconnect Switches from Brocade & Cisco 

Virtual Connect Fibre Channel modules 

Fibre Channel Pass-Thru module. 

InfiniBand Switch modules 

For additional HP BladeSystem c-Class Interconnect and Mezzanine Components: 



Infrastructure Management: 

HP Insight Control, a product option, delivers essential infrastructure management that can help save time and 

money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a 

single, simple management console. Insight Control supports Windows -based central management servers. 

HP Matrix Operating Environment for ProLiant, a product option, is an integrated command center that 

enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating 

and reducing the cost of common data center tasks by as much as 40 percent. This ultimately enables them to 

dynamically keep pace with the organization's changing business requirements. 

Mixed Configuration - Full Height and Half Height Population 

The c3000 enclosure is divided into 2 zones or quadrants by the horizontal support metalwork. Zone 1 

includes bays 1, 2, 5, and 6; Zone 2 contains bays 3, 4, 7, and 8. Within each zone a removable divider is 

used to support half height devices. To install a full-height blade in either zone this divider must be removed. 

An optional mini-divider support bracket is included with every c3000 enclosure. When using a mix of fullheight 

and half height blades in Zone 2, the optional mini-divider can be used to help support the half-height 

blades if they are being used in slots 7 and/or 8. Each zone can support up to 2 full-height blades, or up to 4 

half height blades, or a mix of 1 full-height blade and up to 2 half-height blades. 

NOTE: Please read the RTF card (included with each c3000 enclosure) and the "HP BladeSystem c3000 

Setup and Installation Guide" for more information on using bay dividers and the mini-divider for mixed 

configurations. 


QuickSpecs 


Overview 

NOTE: Storage or tape blades can be installed in the same zone as both full-height and half-height blades, a 

bracket ships with each D2200sb that allows a half-height blade to be mounted to the storage or tape blade. 

NOTE: In this case, the D2200sb or tape blade cannot be removed without first removing the half height blade 

and mounting bracket. 

NOTE: For Mixed configurations of full height and half height population rules; please see the c3000 

Enclosure installation and users guide at: http://h71028.www7.hp.com/enterprise/cache/316682-0-0-0- 

121.html and the user guides for the blades being configured. 

Warranty: 

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of 

HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from 

date of purchase. Support for software and initial setup is available for 90 days from date of purchase. 

Enhancements to warranty services are available through HP Care Pack services or customized service 

agreements. Hard Drives have either a one year or three year warranty; refer to the specific hard drive 

QuickSpecs for details. 

NOTE: Server Blade Enclosure Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. 

For additional information please visit: 

http://h18004.www1.hp.com/products/blades/components/components.html 


QuickSpecs 


Models 

HP BladeSystem 

c-Class Server Blade 

Enclosures 

Rack Models - Supports a full enclosure of 8 blades 

HP BLc3000 Platinum Enclosure with 4 AC Power Supplies 6 Fans ROHS 8 

Insight Control Licenses 

NOTE: Includes 4 AC Power Supplies, 6 Active Cool 100 Fans, DVD drive, Rail 

Kit, Onboard Administrator DDR2 module and 8 Insight Control Licenses. 

HP BLc3000 Platinum Enclosure with 4 AC Power Supplies 6 Fans ROHS Trial 

Insight Control License 


Kit, Onboard Administrator DDR2 module, and 8 Insight Control Trial Licenses. 

HP BLc3000 Enclosure with 4 AC Power Supplies 6 Fan Full ICE License 


Kit, Onboard Administrator DDR2 module and 8 Insight Control Licenses. 

HP BLc3000 Enclosure with 4 AC Power Supplies 6 Fan Trial ICE License 


Kit, Onboard Administrator DDR2 module, and 8 Insight Control Trial Licenses. 

HP BLc3000 Enclosure with 2 AC Power Supplies 4 Fan Trial ICE License 

NOTE: Includes 2 AC Power Supplies, 4 Fans, an Onboard Administrator DDR2 

module, a DVD drive, rail kit, and 8 Insight Control Trial Licenses; additional 

power supplies and fans can subsequently be added to support more than 4 

blades. 

696908-B21 

696909-B21 

508664-B21 

508665-B21 

536841-B21 


QuickSpecs 


HP BladeSystem c-Class Overview 


Overview 

As server, storage and network technologies have changed; traditional rack-mounted 

infrastructure solutions have generated increased complexity of both infrastructure management 

and physical datacenter deployment. 

HP BladeSystem is the evolution of rack-mounted and pedestal infrastructure. A BladeSystem 

reduces costs and simplifies the management, building, and maintenance of the infrastructure 

behind your multi-server environment. It consolidates and repackages all the supporting 

infrastructure elements-compute, storage, network, and power into a single platform that can 

accelerate the integration and optimization of your data center. 

The HP BladeSystem c3000 enclosure has the flexibility to scale from a single enclosure holding 

up to 8 blades, to a rack containing 7 enclosures holding up to 56 blades, the c-Class 

infrastructure is designed to meet the needs of today's businesses. The c3000 enclosure is 

designed for several markets: 

Remote sites or branch offices holding between 3 and 8 servers, and in deployment sites 

such as retail stores, branch offices, manufacturing sites, and wiring closets. This 

enclosure is also designed for harsh environments not found in modern datacenters (high 

ambient temperatures, dusty environments, and in ships, airplanes, platforms, and 

vehicles). 

Small and medium businesses, who own between 3 and 100 servers. The enclosure is 

designed for use with management devices such as local KVM switches for local 

administration. 

Datacenters with special power and cooling constraints, such as datacenters needing DC 

powered racks, and/or datacenters with low power & cooling capacities (under 3000 watts 

per rack). 

HPC clusters with InfiniBand interconnection, where the applications need a 1 to 1 IB 

network subscription ratio between physical nodes in the compute cluster. 

HP BladeSystem c-Class infrastructure is made up of several components: 

HP ProLiant and/or HP Integrity Server blades for HP-UX, Windows, Linux, and HP Open 

VMS. 

Choice of Intel® or AMD processors, HP BladeSystem c-Class enclosure (either a c7000 

or c3000) that provides connectivity, power, and cooling options. The c-Class enclosure is 

designed for full redundancy and high availability. A configurable choice of either redundant 

or non-redundant power, cooling, enclosure management, and interconnect modules are 

part of the standard enclosure design. 

Onboard Administrator module which provides a single point of control for intelligent 

management of the entire enclosure. 

Insight Display powered by the Onboard Administrator provides local management through 

an LCD display conveniently sited on the front of the system. 

Virtual Connect, Ethernet, Fibre Channel, InfiniBand, iSCSI, and other interconnect choices 

A power subsystem that provides either redundant or non-redundant power modes and 

Dynamic Power Saving mode, which uses up to 30% less power than traditional rackmounted 

servers AC or DC power supplies are available. 

PARSEC (Parallel, Redundant, Scaleable, Enclosure Cooling) architecture: for maximum 

cooling that consumes less power and reduces datacenter noise. 

Direct-attach storage blades, and shared storage blades, which will provide file-based or 

block-based shared storage capacity for the servers within the enclosure. 


QuickSpecs 



HP ProLiant & Integrity Delivering best-in-class performance, choice and reliability on AMD Opteron, Intel® Xeon® and 

Server Blades Intel® Itanium® processors for Windows, Linux, Solaris, OpenVMS, or HP-UX based servers; the 

HP portfolio of server blades supports a variety of application requirements for scale-out 

architectures. HP offers one-, two-, four- and eight -processor server blades, with the widest 

range of performance, and form factors. 

For more information please see: 


NOTE: The length of HP ProLiant Gen8 server blades is longer than previous generations, and 

these server blades protrude slightly from the edge of the enclosure. The initial stopping point of 

the Insight Display allows for the screen to be flush with previous generation servers. There is an 

additional stopping point that allows you to pull the Insight Display out to accommodate the 

longer Gen8 server blades. 

HP D2200sb Storage 

Blade 

Direct attached storage 

The D2220sb Storage Blade delivers direct attached storage for c-Class Gen8 blade servers, 

with support for up to twelve hot plug small form factor (SFF) SAS or SATA Midline hard disk 

drives or SAS/SATA SSDs. The enclosure backplane provides a PCI Express connection to the 

adjacent c-Class server blade and enables high performance storage access without any 

additional cables. The D2220sb Storage Blade features an onboard Smart Array P420i controller 

with 2GB flash-backed write cache, for increased performance and data protection. Up to eight 

D2220sb storage devices can be supported off a single BladeSystem c7000 enclosure for up to 

115.2 TB of capacity. 

Two ways to create shared storage with the D2220sb 

Use HP StoreVirtual VSA software to turn the D2220sb into an iSCSI SAN for use by all servers 

in the enclosure and any server on the network. HP VSA software is installed in a virtual machine 

on a VMware ESX host server adjacent to the D2220sb. HP StoreVirtual VSA turns the D2220sb 

into a scalable and robust iSCSI SAN, featuring storage clustering for scalability, Network RAID 

for storage failover, thin provisioning, snapshots, remote replication, and cloning. Expand 

capacity within the same enclosure or to other BladeSystem enclosures by adding additional 

D2220sb Storage Blades and HP VSA licenses. A cost effective bundle of the D2220sb Storage 

Blade and a HP StoreVirtual VSA license makes purchasing convenient. If storage needs 

increase, add HP P4300 or P4500 systems externally and manage everything via a single pane 

of glass. 

The HP StoreEasy 3830 Gateway Storage Blade is a flexible storage server solution for 

BladeSystem environments. Combine the StoreEasy 3830with the D2220sb Storage Blade to 

enable file serving and iSCSI shared storage inside the BladeSystem enclosure. 

NOTE: c3000 requires 6 fans, storage blade is not supported with 4 fan configuration. 

For more information, please visit: 



QuickSpecs 



HP Ultrium Tape 

Blades 

HP Ultrium Tape Blades provide integrated data protection for HP BladeSystem c-Class 

enclosures: 

SB1760c Tape Blade is LTO-4 Ultrium tape technology with capacity up to 1.6 TB on a 

single data cartridge (2:1 compression) and performance up to 576 GB/hr (2:1 

compression). SB1760c also includes hardware data encryption capability which can help 

safeguard data on tape cartridges. 

HP Ultrium Tape Blades provide direct attach data protection for the adjacent server and network 

backup protection for all other data within the enclosure. The HP Ultrium Tape Blades are the 

industry's first bladed tape drives and are developed exclusively for the BladeSystem c-Class 

enclosures. 

For more information, please visit: 


HP Network Storage 

Servers 

HP X1800sb G2 Network Storage Blade is a flexible storage server solution for BladeSystem 

environments. Combine the X1800sb G2 with the D2200sb Storage Blade to enable file serving 

and iSCSI shared storage inside the BladeSystem enclosure. The flexibility of the X1800sb G2 

extends to external storage as well. The X1800sb G2 can also be used as a low cost SAN 

gateway to provide consolidated file-serving access to FC, SAS, or iSCSI SANs. 

Built on the HP ProLiant BL460c G7 Server Blade, the HP X1800sb G2 Network Storage Blade 

with an D2200sb is a ready to deploy shared storage solution, with Microsoft Storage Server 

2008 R2, Standard x64 Edition pre-installed. The HP Rapid Start-up Wizard accelerates new 

deployments by walking you through basic system settings step-by-step. The X1800sb G2 also 

includes Microsoft iSCSI Software Target. 

NOTE: See the QuickSpecs for Technical Specifications and additional information: 


The X3800sb G2 Network Storage Gateway Blade is used to access FC, SAS, or iSCSI SAN 

storage, translating file data from the server into blocks for storage to provide consolidated file, 

print, and management hosting services in a cluster-able package. 

Built on the HP ProLiant BL460c G7 Server Blade, the HP X3800sb G2 Network Storage 

Gateway Blade is a ready to deploy SAN gateway solution, with Microsoft Storage Server 2008 

R2, Enterprise x64 Edition pre-installed. The HP Rapid Start-up Wizard accelerates new 

deployments by walking you through basic system settings step-by-step. The X3800sb G2 also 

includes a Microsoft Cluster Server (MSCS) license and Microsoft iSCSI Software Target. 

NOTE: See the QuickSpecs for Technical Specifications and additional information: 



QuickSpecs 



HP BladeSystem c- 

Class c3000 Enclosure 

A BladeSystem c3000 enclosure holds up to 8 server and/or storage blades plus redundant or 

non-redundant network and storage switches. It includes a shared, multi-terabit high-speed midplane 

for wire-once connectivity of server blades to network and shared storage. Power is 

delivered through a pooled power backplane that ensures the full capacity of the power supplies 

is available to all blades. 

Each c3000 enclosure is built with the following functions: 

Up to 8 half-height and/or up to 4 full-height server blades and/or storage blades per 

enclosure. 

Up to 3 different interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported 

simultaneously within the enclosure. 

A single-phase power subsystem - for flexibility in connecting to datacenter power, or to 

UPS's or to low-line wall outlets. 

Choice of AC or DC power supplies. 

PARSEC enclosure design - Parallel, redundant and scalable cooling and airflow design. 

Six (6) Active Cool fans 

Fully redundant design - no single point of failure; redundant interconnections between 

servers and interconnect modules; a mid-plane with no active components; redundant 

cooling using Active Cool fans; all devices are hot-pluggable and customer replaceable. 

Best performance per watt - lower wattage per server blade, in comparison to rackmounted 

servers 

Full AC redundancy - with no power zones. 

Single or Dual Onboard Administrator management modules 

An Onboard Administrator management module is built in to the enclosure with the following 

functions: 

Robust, multiple enclosure setup and control. 

Reports asset and inventory information for the devices in the enclosure. 

Reports thermal and power information, including real-time actual power usage per server 

and per enclosure. 

Front-mounted Insight Display for easy management at the deployment site. 

Integrated access to all server blade iLOs from a single cable. 

Provides integrated access to interconnect bay device management ports from the single 

Onboard Administrator cable. 

Single sign-on capability for all devices in the enclosure 

Role-based security locally and/or with LDAP directory services. 

Provides a wizard-based initial setup process for easy configuration. 

An optional DVD drive for local software deployment, and HP SmartStart deployment 

An optional local KVM interface for connection to KVM switches. 

A BladeSystem c3000 enclosure provides the following benefits: 

With local and remote hardware management integrated across the solution, one full 

enclosure can be managed as easily as one server. 

Scalable: Management and network interconnects extend scalability beyond a single 

enclosure, allowing resources to be pooled and shared across multiple enclosures. 

Investment protection: Accommodates multiple server and network designs in one 

enclosure. 

Lower costs per server, in comparison to rack-mounted servers 

Lower power consumption, in comparison to rack-mounted servers. 

Service and management: Allows multiple administrators to remotely access and maintain 

multiple servers & interconnect devices simultaneously. 


QuickSpecs 



HP BladeSystem c- 

Class Interconnect 

Options 

HP also offers one of the broadest selections of interconnect fabric options in the industry to 

provide network, SAN/network attached storage (NAS), and cluster connectivity. 

HP BladeSystem interconnects provide: 

New HP Virtual Connect devices, designed to reduce networking costs and simplify 

network configuration and provisioning. 

Seamless integration of Ethernet, FC, InfiniBand, iSCSI, and SAS fabrics: Standard-based 

switch options include Cisco, Brocade, and HP (BNT) products that integrate within your 

existing standards. 

Built-in redundancy: Rear-mounting interconnect modules designed for redundant 

interconnections between server blades and switches. 

Cable reduction: Interconnect switches provide up to 32-to-1 network cable reductions per 

server blade enclosure 




Factory Express 

Portfolio for Servers 

and Storage 

HP Factory Express offers configuration, customization, integration and deployment services for 

HP servers and storage products. Customers can choose how their factory solutions are built, 

tested, integrated, shipped and deployed. 

Factory Express offers service packages for simple configuration, racking, installation, complex 

configuration and design services as well as individual factory services, such as image loading, 

asset tagging and custom packaging. HP products supported through Factory Express include: a 

wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant & Integrity Server 

Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable 

tape libraries and configurable network switches. 

For more information on Factory Express services for your specific server model please contact 

your sales representative or go to: http://www.hp.com/go/factory-express 

HP Simple 

Configurator 

SCE is a guided self service tool to help sales and non technical people provide customers with 

initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration 

help, or use in your existing ordering processes. If you require "custom" rack configuration or 

configuration for products not available in SCE, please contact HP's Customer Business Center 

or an Authorized Partner for assistance. http://www.hp.com/products/configurator 

HP Insight 

Insight Management 

management software 

Managing the growing number of servers can be complex and 

expensive for your organization. IT managers need to address 

changing business needs with tools that meet the challenges of 

managing today's complex Datacenters. 

HP Insight Management lowers the cost of running your HP ProLiant 

servers by providing you with best-in-class management tools, 

including HP Insight Control, HP Virtual Connect Enterprise Manager 

(VCEM), and HP Matrix Operating Environment. Insight Management 

increases your productivity and reduces your operating costs to get you 

higher value from your HP ProLiant servers. 

Electronic download of Insight Management Media 

Insight Management software media is available for free download (not 

including license entitlement certificates) at this website: 

http://www.hp.com/go/insightupdates. 

Software media available for download includes: 


QuickSpecs 



HP Insight Control 

HP Insight Control for Microsoft® System Center 

HP Insight Control for VMware vCenter Server 

HP Virtual Connect Enterprise Manager (VCEM) 

HP Matrix Operating Environment 

Customers will receive an Insight Control or Matrix Operating 

Environment license entitlement certificate via physical shipment or 

email. The license 

entitlement certificate must be redeemed online or via fax in order to 

obtain the license activation key(s). 

One year of 24x7 Software Technical Support and Updates are 

included with your purchased licenses. 

HP provides a complete range of installation and support services to 

ensure the successful deployment and operations of your server 

infrastructure. For more information about support services and 

licensing 

options, see the following website: 

http://www.hp.com/go/insightsoftware 

Service Pack for 

ProLiant (SPP) 

ProLiant Onboard 

Administrator 

HP Insight Control 

HP Matrix Operating 

Environment 

Insight Software Media Kit (DVDs) 

Physical media (DVDs) are also available for purchase from HP or from 

your authorized reseller (PN 436222-B21) 

Customers should use the HP Service Pack for ProLiant to update 

firmware, drivers, and related utilities.: 

Main SPP page: www.hp.com/go/spp 

SPP download page: www.hp.com/go/spp/download 

HP ProLiant Onboard Administrator (powered by the HP Integrated 

Lights-Out 2 management processor) simplifies server setup, health 

monitoring, power and thermal control, and lights-out remote 

administration of ProLiant ML, DL, and BL servers. HP ProLiant 

Onboard Administrator functions without additional software, and can 

be accessed from any location via a web browser. It works hand-inhand 

with HP Systems Insight Manager, Insight Control, and the Matrix 

Operating Environment for ProLiant helping customers unlock the 

value of the ProLiant platform and deliver the highest possible quality 

of IT service to the business. See: www.hp.com/go/ProLiantOA 

HP Insight Control, a product option, delivers essential infrastructure 

management that can help save time and money by making it easy to 

deploy, migrate, monitor, remote control, and optimize your IT 

infrastructure through a single, simple management console. For more 

information, see http://www.hp.com/go/insightcontrol. 

HP Insight Control includes one year of 24 x 7 HP Software Technical 

Support and Update Service ensuring rapid access to HP support staff 

and proactive delivery of software updates. For more information about 

this service, please visit: http://www.hp.com/services/insight 

The HP Matrix Operating Environment (Matrix OE) for ProLiant and 

Integrity servers is an integrated command center that helps you 

instantly adjust to dynamic business demands. This advanced 

infrastructure management software lets you reduce the cost of 

common data center tasks by up to 40 percent while keeping pace with 

your changing business. 


QuickSpecs 



The HP Matrix OE includes the automated provisioning, optimization, 

and recovery management capabilities for HP CloudSystem Matrix, the 

ideal platform for private cloud and Infrastructure as a Service (IaaS). 

For more information, see http://www.hp.com/go/matrixoe. 

HP BladeSystem PowerThe HP BladeSystem Power Sizer helps in sizing the power infrastructure needed for a HP 

Sizer 

BladeSystem solution. This sizer enables effective planning for the power consumption and heat 

load of the BladeSystem at its site. 

The sizer enables you to: 

Select the type and number of components within each Blade Server and Blade Enclosure. 

View the effect of component changes on the power consumption and heat loading. 

Review server loading and determine power supply and power subsystem requirements. 

Approximate electrical and heat load for facilities planning purposes. 

The sizing estimate is based on component level power measurements for a system stressed to 

maximum capability. 

Values obtained from the BladeSystem Sizer tool are measured with all components stressed to 

100% load and are intended for facilities planning purposes only. Actual power consumption 

varies with application type, application utilization, and ambient temperature. 

The p-class BladeSystem and the c-Class BladeSystem solutions are supported in the 

BladeSystem Power Sizer. 

HP Power Advisor 

Available at: http://www.hp.com/go/bladesystem/powercalculator 

The HP Power Advisor is a tool provided by Hewlett-Packard to assist in the estimation of power 

consumption and proper selection of components including power supplies at a system, rack, 

and multi-rack level. A variety of additional features are also provided including a condensed bill 

of materials, a cost of owner ship calculator, and a power report. The HP Power Advisor allows 

for the mixing of rack, blade, and other products in a single environment. 

Available at: http://www.hp.com/go/hppoweradvisor 


QuickSpecs 


Service and Support 


HP Technology Services for Industry Standard Servers and BladeSystem 

Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner 

who understands your increasingly complex business technology environment. That's why it 

makes sense to team up with the people who know HP infrastructure hardware and software best 

- the experienced professionals at HP Services. 

Protect your business beyond warranty with HP Care Pack Services 

HP Care Pack services offer complete care and support expertise with committed response 

choices designed to meet your IT and business needs. 

HP Foundation Care services offer scalable reactive support-packages for HP servers and 

software. You can choose the type and level of service that is most suitable for your IT and 

business needs. HP Proactive Care delivers high levels of system availability through proactive 

service management and advanced technical response. HP Datacenter Care provides highly 

flexible environmental support to address unique customer business needs. 

Choose recommended services for your c3000 BladeSystem enclosure or contact your HP sales 

representative or authorized HP ServiceOne partner for additional HP Care Pack services 

information 

Recommended HP Care Pack Services for your HP product 

Optimized Care 

3-Year HP 6 hour Call to Repair Response, Proactive Care 

Combined reactive and proactive support for hardware and software helping optimize your 

systems and delivering high levels of availability through proactive service management and 

advanced technical response. Hardware problem resolution to return the hardware in operating 

condition within 6 hours of the initial service request. A Technical Account Manager, as your 

single point of contact, will own your call or issue end to end until resolved. 

http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf 

HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000 

enclosure 

Provides for hardware installation (c-Class ProLiant and Integrity server blades, storage blades, 

Ethernet Interconnects and Virtual Connect) and software installation and startup of a 

BladeSystem c3000 Infrastructure in a single enclosure including deployment of OS on all blades 

or deployment of OS (two blades) and HP Insight Control, plus Server Deployment (formerly 

RDP). 

http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf 

Standard Care 

HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network 

Provides for the configuration and testing of BladeSystem Ethernet interconnect switches and 

Virtual Connect to facilitate proper implementation of network protocols and access to advanced 

features. 

http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf 

3-Year HP 24x7 4 hour response, Proactive Care Service 

This service gives you combined reactive and proactive support including rapid access to our 

Advanced Solution Center to manage and prevent problems and a Technical Support Specialist 

with a broad level of technical knowledge that will engage with additional technical expertise as 

needed from HP's vast global resources. 

http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf 

HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000 

enclosure 

Provides for hardware installation (c-Class ProLiant and Integrity server blades, storage blades, 

Ethernet Interconnects and Virtual Connect) and software installation and startup of a 

BladeSystem c3000 Infrastructure in a single enclosure including deployment of OS on all blades 

or deployment of OS on two blades and HP Insight Control, plus Server Deployment (formerly 

RDP). 


QuickSpecs 



http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf 

Related Services 

HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network 

HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to 

facilitate proper implementation of network protocols and access to advanced features. 

http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf 

HP Proactive Care Personalized Support - Environmental Option 

The Personalized Support option provides an assigned Account Support Manager who can bring 

best practices from across the industry plus extra technical skills to your IT team. This option is 

only available as an add-on to HP Proactive Care Support. 

HP Proactive Select Service 

Provides a flexible way to purchase HP best-in-class consultancy and technical services. You 

can buy Proactive Select Service Credits when you purchase your hardware and then use the 

credits over the next 12 months. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2- 

3842ENN.pdf 

Insight Online/Insight 

Remote Support 

HP Support Center 

Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc 

HP Insight Remote Support provides 24 X 7 remote monitoring, proactive notifications, and 

problem resolution. This comes at no additional cost with your HP solution. Learn more about 

Insight Remote Support http://www.hp.com/go/insightremotesupport and Insight Online 

http://www.hp.com/go/insightonline 

NOTE: Insight Remote Support is a prerequisite for Proactive Care. All blades within a single HP 

BladeSystem enclosure must be at the same service level. 

Personalized online support portal with access to information, tools and experts to support HP 

business products. Submit support cases online, chat with HP experts, access support resources 

or collaborate with peers. Learn more http://www.hp.com/go/hpsc 

HP's Support Center Mobile App allows you to resolve issues yourself or quickly connect to an 

agent for live support. Now, you can get access to personalized IT support anywhere, anytime. 

HP Insight Remote Support and HP Support Center are available at no additional cost with a HP 

warranty, HP Care Pack or HP contractual support agreement. 

Parts and Materials 

NOTE: HP Support Center Mobile App is subject to local availability. 

HP will provide HP-supported replacement parts and materials necessary to maintain the 

covered hardware product in operating condition, including parts and materials for available 

and recommended engineering improvements. 

Parts and components that have reached their maximum supported lifetime and/or the 

maximum usage limitations as set forth in the manufacturer's operating manual, product 

quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as 

part of these services. 

For more information 

The defective media retention service feature option applies only to Disk or eligible SSD/Flash 

Drives replaced by HP due to malfunction 

To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP 

sales representative or HP Authorized ServiceOne partner. Or visit: 

www.hp.com/services/bladesystem 


QuickSpecs 


Configuration Information Factory Integrated Models 

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid 

configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales 

representative for information on CTO product offerings and requirements. 

NOTE: HP does not allow factory integration of options into standard models listed above. 

Configure-to-order server blades must start with a CTO Blade. 

NOTE: FIO indicates that this option is a factory installable option. 

For a complete configuration of the HP BladeSystem, please do the following: 

Step 1: Select desired model, configuration and quantity of HP ProLiant server 

and Storage blades 

NOTE: HP BladeSystem c3000 and c7000 enclosures support mixing of G1 through Gen8 and Integrity server blades in 

the same enclosure 

NOTE: For server blade information, please visit: 


NOTE: For Storage Blade information, please visit: 


Step 2: Determine quantity of HP BladeSystem c-3000 Enclosures to purchase 

and choose Required Options 

(One of the following from each list unless otherwise noted): 

NOTE: Each HP BladeSystem c3000 Server Blade Enclosure holds up to 8 half-height blades, or up to 4 full-height server 

blades. Server blanks will be shipped in all empty bays. 

Select Base Server Blade Enclosure Configuration 

HP BladeSystem c3000 

c-Class Server Blade 

Enclosures 

Choose one of the following CTO enclosures 

HP BLc3000 Platinum Configure-to-order Enclosure with 6 Fans ROHS Trial 

Insight Control License 

NOTE: CTO model includes 0 AC power supplies and 6 Active Cool 100 Fans, 

a DVD drive, rack rails, and a single DDR2 Onboard Administrator module. 

HP BLc3000 Configure-to-order Enclosure 

NOTE: CTO model includes 2 AC power supplies and 4 Active Cool 100 Fans, 

a DVD drive, rack rails, and a single DDR2 Onboard Administrator module. 

HP Integrity BLc3000 CTO Enclosure 

NOTE: CTO model includes 0 AC power supplies and 6Active Cool 100 Fans, a 

DVD drive, rack rails, and a single DDR2 Onboard Administrator module. 

696910-B21 

508668-B21 

AH257C 

Select additional optional enclosure options: 

HP Redundant HP BLc3000 Dual DDR2 Onboard Administrator 

Onboard Administrator NOTE: The BLxxxc G7 requires the latest version of the Onboard Administrator 

firmware. This firmware release may also require other subsystem firmware 

upgrades. For information on the latest firmware versions, please see the 

Blades Firmware Maintenance website at: 

http://h18004.www1.hp.com/products/blades/components/c-classcompmatrix.html 

NOTE: Second Onboard Administrator Module for the DDR2 OA module 

included 

in (P/N 696910-B21and AH257C). 

HP Additional c3000 NOTE: Please choose AC or DC power supplies. 

Power Supplies HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit 

NOTE: Platinum power supplies required to enable power discovery services. 

HP 1200W Common Slot Silver Hot Plug Power Supply Kit 

NOTE: AC power supplies include a C13 to C14 PDU power cord. 

NOTE: HP BladeSystem Power supplies meet multiple Energy Efficiency 

488100-B21 

656364-B21 

500172-B21 


QuickSpecs 



HP c-Class Active Cool 

Fan 

HP c3000 KVM 

Modules and Adapters 

Initiatives: 1200W Climate Savers Computing Initiative and ECOS Consulting 

80 Plus : (Platinum (94%) - PN 656364-B21and Silver (90%) - PN 500172-B21). 

NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the 

computer industry, and consumers in an effort to bring energy efficient 

technology solutions to the marketplace. 80 Plus independently tests power 

supply efficiency and publically posts the results on 80Plus.org. 

HP 1200W Common Slot -48VDC Hot Plug Power Supply Kit 

NOTE: DC power supplies contain a -48V DC power cord designed for in rack 

DC power rectifiers. 

NOTE: When this DC power supply (437573-B21) is ordered as a factory 

integrated enclosure option, standard AC supplies are not included in the order 

shipment. When this DC power supply is ordered with an enclosure, but not 

factory integrated, standard AC power supplies are included in the order 

shipment and DC power supplies are shipped separately. 

NOTE: Order additional power supplies for rack models, as determined by the 

use of the HP BladeSystem Power Calculator. 

NOTE: For a full enclosure, order 4 power supplies in a Power Supply 

Redundant (N+1) configuration; order 6 power supplies in an AC Redundant 

(N+N) configuration. 

NOTE: Order 6 power supplies for AC or DC Redundant (N+N) configuration. 

NOTE: Each enclosure must include only 1 type of power supplies. All AC or all 

DC power supplies. 

NOTE: The HP ProLiant 1200w AC Common Slot Power supply meets multiple 

Energy Efficiency Initiatives: Climate Savers Computing Initiative Silver and 

ECOS Consulting 80PLUS Silver. Efficiency test results can be viewed at: 

80Plus.org. 

HP BLc3000 Enclosure HP Single Active Cool 100 Fan Option 

NOTE: These fans are for the HP BladeSystem c3000 CTO Enclosure 

(P/Ns 696910-B21 and AH257C only). 

HP BLc3000 KVM Option 

NOTE: For use with in-rack KVM switches. 

HP KVM USB2 1-pack Interface Adapter 

NOTE: Order one KVM Adapter per c3000 enclosure, to support KVM switches 

accepting RJ45 cables. Please see Options section of this QuickSpecs for 

additional product information. 

HP Insight Control for HP Insight Control Encl FIO Bundle 8 Lic 

BladeSystem Licenses NOTE: This license supports HP ProLiant c-Class blade servers. 

NOTE: Must be purchased as an option to an HP BladeSystem enclosure. FIO 

can only be ordered as part of a factory-configured platform. Customer will 

receive a printed license entitlement certificate via physical shipment. 

HP Insight Control Enc FIO Bundle 16 Lic 

NOTE: This license supports HP ProLiant c-Class blade servers. 

NOTE: Must be purchased as an option to an HP BladeSystem enclosure. FIO 

can only be ordered as part of a factory-configured platform. Customer will 

receive a printed license entitlement certificate via physical shipment. 

HP Optional Power 

Cords 

HP C20 - C13 WW 250V 15Amp 2.0m Jumper Cord 

NOTE: For use with PDU's accepting C20 power cords. 

NOTE: Order 1 for each power supply. 

HP C13 - Nema 6-15P US 250V 15A JP 3.6m Power Cord 

437573-B21 

507082-B21 

437575-B21 

AF603A 

C6N32A 

C6N33A 

AF590A 

A0N33A 

Step 3: Select additional (one to four) interconnects. 


QuickSpecs 



NOTE: Interconnect Bay 1 must contain one of the "Ethernet" interconnect modules For additional information on 

Interconnect and Mezzanine Options, please visit the following: 




HP BladeSystem HP Virtual Connect Flex-10/10D Module for c-Class BladeSystem 638526-B21 

c-Class Ethernet HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem 455880-B21 

Interconnects HP 6125G/XG Ethernet Blade Switch 658250-B21 

HP 6125G Ethernet Blade Switch 658247-B21 

HP 6120G/XG Ethernet Blade Switch 498358-B21 

HP 6120XG Blade Switch 516733-B21 

HP 1GB Ethernet Pass-Thru Module for c-Class BladeSystem 406740-B21 

HP 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem 538113-B21 

Cisco Catalyst 1/10GbE 3120X Blade Switch 451439-B21 

Cisco Catalyst 1GbE 3120G Blade Switch 451438-B21 

Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem 410916-B21 

HP Cisco B22HP Fabric Extender for BladeSystem c-Class 641146-B21 

HP Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class 657787-B21 

NOTE: The Cisco Fabric Extender for HP BladeSystem with 16 FET - (PN 

657787-B21), comes packaged with 16 Cisco Fabric Extender Transceivers. 

These Cisco transceivers can be used to connect the Fabric Extender with a 

parent Nexus 5000 over optical cable up to 100 meters using OM3 grade fiber. 

HP GbE2c Layer 2/3 Ethernet Blade Switch 438030-B21 

HP 1:10Gb Ethernet Blade Switch for c-Class BladeSystem 438031-B21 

NOTE: HP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class 

BladeSystem (P/N 571956-B21) is not compatible with the c3000 enclosure 

HP SAS Switch HP 6Gb SAS BL Switch Single Pack BK763A 

HP 6Gb SAS BL Switch Dual Pack 

BK764A 

NOTE: Please see the QuickSpecs for Technical Specifications and additional 

information at: 


(Worldwide) 

HP 3Gb 8-port SAS 2.0 BL-c Switch Module for BladeSystem c-Class Enclosure AJ864A 




(Worldwide) 


c-Class FC SAN 

Interconnects 

HP 3Gb 8-port SAS 2.0 BL-c Switch Module for BladeSystem c-Class Enclosure AJ864A 

HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem 466482-B21 


HP 4GB Fibre Channel Pass-thru Module for c-Class BladeSystem 403626-B21 

HP B-series 8/12c SAN Switch for BladeSystem c-Class 

AJ820B 


AJ821B 

HP B-series 8/24c Power Pack+ SAN Switch for BladeSystem c-Class 

AJ822B 

HP MDS 8/12c BladeSystem Fabric Switch 

AW563A 


AW564A 

HP MDS 8/12c Fabric Switch 12-port Upgrade LTU 

TA804A 

NOTE: Licensed per switch. 

HP MDS Fabric Manager Server for BladeSystem c-Class LTU 

TC316A 


HP MDS Enterprise Package for BladeSystem c-Class LTU 

TC317A 



QuickSpecs 



HP MDS Fabric Manager Server Enterprise Package for BladeSystem c-Class 

LTU 


TC318A 

Step 4: Select rack power distribution for installing the enclosure into a rack. 

NOTE: For use with the c3000 rack-able model only. 

NOTE: A pair of PDUs must be ordered for AC Feed redundancy. If AC redundancy is not required, a single PDU or UPS 

may be acceptable. 

HP Monitored Power 

Distribution Unit 

HP Modular Power 

Distribution Unit 

HP 8.6kVA 24A Single Input Three Phase NA/JP Monitored Power Distribution AF504A 

Unit 

HP 11kVA 16A Single Input Three Phase INTL Monitored Power Distribution 

AF508A 

Unit 

HP 8.3kVA 40A High Voltage NA/JP Modular Power Distribution Unit 252663-D73 

HP 9.2kVA 40A High Voltage INTL Modular Power Distribution Unit 252663-B32 



HP Two C13 PDU Extension Bar 

AF500A 

Step 5: Select Wall Outlet Power Cords (For connection to standard wall outlets) 

NOTE: Select one wall outlet power cord for each power supply when plugging the power supplies into a wall outlet. 

NOTE: Wall Outlet power cords should only be used with low-line (100v to 110V) power sources. If high-line power outlets 

are required, safety regulations require the use of a PDU or a UPS between the c3000 enclosures power supplies and wall 

outlets. 

NOTE: A standard PDU power cord(c13 to C14) is included with each AC power supply, so these wall outlet power cords 

are not required if you plan to plug the power supplies into a PDU or UPS. 

Order the appropriate power cord for your countries standard electrical outlets. 

HP Power Cords 

HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord 

NOTE: HP Power cord (6 ft) 1.83 meter 10A C-13-UL domestic power cord, for 

grounded USA 110V wall outlets. 

HP C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord 

NOTE: HP Power cord 2 meter C13 Japan low-line power cord, for Japanese 

100V wall outlets. 


NOTE: For use with PDUs accepting C20 power cords. 

NOTE: For additional power cable information, please visit: 

http://h18000.www1.hp.com/products/servers/proliantstorage/powerprotection/options/power-cable.html 

AF556A 

AF572A 

AF590A 


QuickSpecs 


Related Options 

HP c3000 Enclosure 

Options 

HP BLc7000 Miscellaneous Blanks Option Kit 412148-B21 

NOTE: Contains 1 each of Power Supply Blank, Interconnect Module Blank, 

Local KVM option blank, DVD Blank, Active Cool Fan Blank, and c3000 

minidivider) 

NOTE: This kit should only be ordered to replace lost or damaged blanks. 

HP BLc7000 Server Blank w/Coupler Option 

412150-B21 

NOTE: The coupler allows half-height server blanks to be coupled together to 

create a full-height server blank. 

NOTE: This kit should only be ordered to replace lost or damaged blanks. 

HP c3000 Rack 

Brackets 

HP BLc3000 10000 Series Rack Shipping Bracket Option 

NOTE: Required when shipping a c3000 enclosure in a HP 10000 series rack. 

Please order 1 kit per enclosure. 

461384-B21 

HP Onboard 

Administrator 

HP BLc3000 DDR2 Onboard Administrator Rotate LCD Kit 

NOTE: The BLxxxc G7/Gen8 requires the latest version of the Onboard 

Administrator firmware. This firmware release may also require other subsystem 

firmware upgrades. For information on the latest firmware versions, please see 

the Blades Firmware Maintenance website at: 

http://h18004.www1.hp.com/products/blades/components/c-classcompmatrix.html 

NOTE: For field upgrades of previous generation enclosures only. 

NOTE: This Redundant Onboard Administrator module supports either single 

mode, or dual/redundant mode Onboard Administrators. 

HP BLc3000 Dual DDR2 Onboard Administrator 

NOTE: Second Onboard Administrator Module for the DDR2 OA module. 

NOTE: Support for second Order Administrator Module for c3000 Enclosure. 

NOTE: This module fits into an HP c3000 DDR2 Onboard Administrator. 

590863-B21 

488100-B21 

HP c-Class Power 

Supply 

HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit 

NOTE: Platinum power supplies required to enable power discovery services 


NOTE: AC power supplies include a C13 to C14 PDU power cord. 

NOTE: HP BladeSystem Power supplies meet multiple Energy Efficiency 

Initiatives: 1200W, Climate Savers Computing Initiative SILVER and ECOS 

Consulting 80 Plus; (Platinum (94%) - PN 656364-B21 and Silver (90%) - PN 

500172-B21). 

NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the 

computer industry, and consumers in an effort to bring energy efficient 

technology solutions to the marketplace. 80 Plus independently tests power 

supply efficiency and publically posts the results on 80Plus.org. 


NOTE: DC power supplies contain a -48V DC power cord designed for in rack 

DC power rectifiers. 

NOTE: When this DC power supply (437573-B21) is ordered as a factory 

integrated enclosure option, standard AC supplies are not included in the order 

shipment. When this DC power supply is ordered with an enclosure, but not 

factory integrated, standard AC power supplies are included in the order 

shipment and DC power supplies are shipped separately. 

NOTE: For c-3000 Low-line Power Cords, please order the appropriate power 

cord for your countries standard electrical outlets. Please see Step 5 above for 

power cord part numbers. 

656364-B21 

500172-B21 

437573-B21 


QuickSpecs 



NOTE: For c-3000 Low-line Power Cords, please order the appropriate power 

cord for your countries standard electrical outlets. Please see Step 5 above for 

power cord part numbers. 

HP c-Class Active Cool 

Fans 

HP BLc3000 Enclosure HP Single Active Cool 100 Fan Option 507082-B21 

HP c3000 KVM Module 

and Adapters 

HP BLc3000 KVM Option 

NOTE: For use with in-rack KVM switches 

HP KVM USB2 1-pack Interface Adapter 

NOTE: Order one KVM Adapter per c3000 enclosure, to support KVM switches 

accepting RJ45 cables. Please see Options section of this QuickSpecs for 

additional product information. 

437575-B21 

AF603A 


c-Class Ethernet 

Interconnects 

HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem 455880-B21 

HP 6125G Ethernet Blade Switch 658247-B21 



HP 6120XG Blade Switch 516733-B21 

HP 1GB Ethernet Pass-Thru Module for c-Class BladeSystem 

406740-B21 

NOTE: The Ethernet Pass-Thru Module is shipped as a single unit and should 

be ordered in quantities of two. 

Cisco Catalyst 1/10GbE 3120X Blade Switch 451439-B21 

Cisco Catalyst 1GbE 3120G Blade Switch 451438-B21 

Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem 410916-B21 

HP GbE2c Layer 2/3 Ethernet Blade Switch 438030-B21 

HP 1:10Gb Ethernet Blade Switch for c-Class BladeSystem 438031-B21 

NOTE: HP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class 

BladeSystem (P/N 571956-B21) is not compatible with the c3000 enclosure 


c-Class FC SAN 

Interconnects 



HP 4GB Fibre Channel Pass-thru Module for c-Class BladeSystem 403626-B21 

Brocade SAN Switch 

for HP BladeSystem c- 

Class 



HP B-series 8/24c Power Pack+ SAN Switch for BladeSystem c-Class 

Brocade 4/12 SAN Switch Upgrade RTU for HP BladeSystem c-Class 

AJ820B 

AJ821B 

AJ822B 

AE373A 

Cisco MDS Fabric 

Switch for HP 

BladeSystem c-Class 



HP MDS Fabric Manager Server Enterprise Package for BladeSystem c-Class 

LTU 

HP B-series 8/12c SAN Switch for BladeSystem c-Class 12-port Upgrade LTU 

Cisco MDS 9124e Switch for c-Class BladeSystem 12-port Upgrade LTU 




(Worldwide) 

AW563A 

AW564A 

TC318A 

T5517A 

T5169A 


QuickSpecs 



HP Insight Software HP Insight Control 

HP Insight Control for BladeSystem including 1yr 24x7 Support Enclosure 8 

Server Electronic License 

HP Insight Control for BladeSystem including 1yr 24x7 Support Enclosure 16 

Server Electronic License 

HP Insight Control Server Provisioning Media Kit 

NOTE: HP Insight Control 7.2 introduces Insight Control server provisioning, a 

new capability ideal for multi-server OS and firmware provisioning to ProLiant 

and BladeSystem servers. Insight Control server provisioning is included and 

licensed as part of HP Insight Control. A media kit, "HP Insight Control server 

provisioning USB media kit" (# BD883A), including a USB, is available for 

customers who require a physical copy of the media loaded with Insight Control 

server provisioning software. Please note that this media kit is separate and in 

addition to the "HP Insight Management DVD media kit" (#C6N31A). 

HP Insight Management Media Kit 

NOTE: HP Insight Management Media Kit contains DVDs without licenses. 

Contains HP Systems Insight Manager, HP Insight Control, HP Matrix 

Operating Environment, and Virtual Connect Enterprise Manager software. 

Uses an integrated installer to perform quick and accurate software installation 

and updates. 

NOTE: Licenses ship without media. The Insight Control Media Kit can be 

ordered separately, or can be downloaded at: 

http://www.hp.com/go/insightupdates. 

NOTE: The "for bundling with an enclosure" license kits can only be ordered 

together with a BladeSystem c3000 or c7000 enclosure on the same order. 

NOTE: Customer will receive a license entitlement certificate, which must be 

redeemed online or via fax in order to obtain the license activation key(s). 

Includes one year of 24 x 7 HP Software Technical Support Service. 

NOTE: For additional License Kits, please see the QuickSpecs at: 


(Worldwide) 

C6N32AAE 

C6N33AAE 

BD883A 

C6N31A 

HP iLO Advanced for 

BladeSystem License 

HP iLO Advanced for BladeSystem including 1yr 24x7 Support Eight Server 

License 

512489-B21 

HP Virtual Connect 

Enterprise Manager 

HP Virtual Connect Enterprise Manager including 1yr 24x7 Support Single 

c3000 Enclosure Lic 

NOTE: This license allows 1 BL-c3000 enclosure to be managed with VCEM. 

Customer will receive a printed license entitlement certificate via physical 

shipment. The license entitlement certificate must be redeemed online or via fax 

to obtain the license activation key(s). Includes one year of 24 x 7 HP Software 

Technical Support and Update Service. 

NOTE: For additional License Kits, please visit: 


(Worldwide) 

459867-B21 


QuickSpecs 



HP c-Class Storage 

Blades 

HP StoreEver LTO-5 Ultrium SB3000c Tape Blade 




(Worldwide) 




(Worldwide) 




(Worldwide) 

BS580B 

HP Ultrium Tape 

Blades 

HP StoreEver LTO-4 Ultrium SB1760c Tape Blade 

AQ697B 

NOTE: LTO-4 Ultrium tape technology 

NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is 

required to support the HP D2200sb PCIe Storage Blade with HP c-Class 

BladeSystem full-height server blades. Up to two storage blades are supported 

per server mix and match (Ultrium Tape, D2200sb PCIe Storage, and/or PCI 

Expansion Blades). 

HP BL c-Class SB40c PCI Express Mezzanine Pass Thru Option Kit 431643-B21 

NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem 

(431643-B21) is required when installing a tape blade adjacent to a full-height 

server blade 




(Worldwide) 

HP Storage Blade 

HP D2200sb Storage Blade 

NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is 

required to support the HP D2200sb PCIe Storage Blade with HP c-Class 

BladeSystem full-height server blades. Up to two storage blades are supported 

per server mix and match (Ultrium Tape, D2200sb PCIe Storage, and/or PCI 

Expansion Blades). 

NOTE: The HP PCI Express Mezzanine Pass-Thru Card can be placed in 

mezzanine slot 2 and/or 3. 

HP D2200sb PCIe and P4000 VSA with Smart Array Advance Pack LTU Bundle 

HP D2200sb PCIe w/12 600GB 6G SAS HDD with Smart Array Advance Pack 

LTU Bundle 

HP D2200sb PCIe Storage Blade with Smart Array Advance Pack LTU Bundle 

HP D2220sb PCIe and StoreVirtual VSA Bundle with SAAP License 

HP D2220sb PCIe w/(12) 900 GB 6G SAS HDD Bundle with SAAP License 

HP D2220sb Storage Blade Bundle with SAAP License 

HP D2220sb Configure-to-order Storage Blade 

HP D2220sb Build-to-order Storage Blade 

NOTE: Please see the HP D2200sb PCIe Storage Blade QuickSpecs for 

technical specifications and additional information at: 


HP StoreEasy 3830sb Gtwy Blade Storage 

NOTE: Please see the HP D2200sb PCIe Storage Blade QuickSpecs for 

technical specifications and additional information at: 

http://h18006.www1.hp.com/storage/bladesystem/index.html 

AP880A 

AP881A 

AP882A 

BK781A 

QW914A 

QW915A 

QW916A 

QW918A 

QW917A 

B7E01A 


QuickSpecs 



HP Expansion Blade HP BLc PCI Expansion Blade 448018-B21 




(Worldwide) 

HP Power Distribution 

Units 

Monitored PDU 

HP 8.6kVA 24A Single Input Three Phase NA/JP Monitored Power Distribution AF504A 

Unit 

HP 11kVA 16A Single Input Three Phase INTL Monitored Power Distribution 

AF508A 

Unit 

NOTE: Please see the following QuickSpecs for additional information: 


(Worldwide) 

Modular PDUs 





NOTE: Please see the following QuickSpecs for additional options including 

shorter jumper cables and country specific power cords: 


(Worldwide) 

HP Two C13 PDU Extension Bar 

AF500A 


information: www.hp.com/go/pdu (Worldwide) 

NOTE: Please see the UPS and PDU cable matrix's on the HP Power 

Protection and Management page. Under Power Cords, click on the "HP Power 

Cord Matrix" link. That link will list cable descriptions, requirements, and 

specifications for UPS and PDU units. Please see the following link: 

www.hp.com/products/powercords. 

HP Power Cords 


NOTE: For use with PDU's that accept C20 power cords. 

AF590A 

HP Uninterruptible 

Power Systems 

R5000 Uninterruptible Power System (UPS) 

HP R5KVA 3U IEC309-32A High Voltage INTL Uninterruptible Power System 

HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System 




(Worldwide) 

R7000 Uninterruptible Power System (UPS) 

HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System 

HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System 

HP R5KVA and R7KVA 3U Extended Runtime Module 




(Worldwide) 

AF461A 

AF460A 

AF462A 

AF463A 

AF464A 


QuickSpecs 



HP Rack Series 

(Graphite Metallic) 

HP Intelligent Series Rack 

HP 642 1075mm Pallet Intelligent Series Rack 

HP 642 1075mm Shock Intelligent Series Rack 




(Worldwide) 

NOTE: For additional information regarding Rack Cabinets, please see the 

following URL: http://www.hp.com/go/rackandpower 

BW903A 

BW904A 

HP Rack Options Keyboards and Monitors 

HP USB BFR with PVC Free IN Keyboard/Mouse Kit 672097-D63 

HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit 672097-373 

HP USB BFR with PVC Free Intl Keyboard/Mouse Kit 672097-B33 

HP USB BFR with PVC Free PT Keyboard/Mouse Kit 672097-133 

HP USB BFR with PVC Free TR Keyboard/Mouse Kit 672097-143 

HP USB BFR with PVC Free CZ Keyboard/Mouse Kit 672097-223 

HP USB BFR with PVC Free FI Keyboard/Mouse Kit 672097-353 

HP USB BFR with PVC Free SE Keyboard/Mouse Kit 672097-103 

HP USB BFR with PVC Free CH Keyboard/Mouse Kit 672097-113 

HP USB BFR with PVC Free KR Keyboard/Mouse Kit 

672097-KD3 

HP USB BFR with PVC Free US Keyboard/Mouse Kit 631341-B21 

HP USB BFR with PVC Free UK Keyboard/Mouse Kit 631344-B21 

HP USB BFR with PVC Free FR Keyboard/Mouse Kit 631346-B21 

HP USB BFR with PVC Free ES Keyboard/Mouse Kit 631348-B21 

HP USB BFR with PVC Free DE Keyboard/Mouse Kit 631358-B21 

HP USB BFR with PVC Free JP Keyboard/Mouse Kit 631360-B21 

HP USB BFR with PVC Free IT Keyboard/Mouse Kit 631362-B21 

HP USB BFR with PVC Free CN Keyboard/Mouse Kit 631364-B21 

HP USB BFR with PVC Free AE Keyboard/Mouse Kit 638212-B21 

HP USB BFR with PVC Free RU Keyboard/Mouse Kit 638214-B21 


information: 


(Worldwide) 

HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor 

AZ870A 

HP TFT7600 G2 KVM Console Rackmount Keyboard UK Monitor 

AZ871A 

HP TFT7600 G2 KVM Console Rackmount Keyboard DE Monitor 

AZ872A 

HP TFT7600 G2 KVM Console Rackmount Keyboard FR Monitor 

AZ873A 

HP TFT7600 G2 KVM Console Rackmount Keyboard IT Monitor 

AZ874A 

HP TFT7600 G2 KVM Console Rackmount Keyboard ES Monitor 

AZ875A 

HP TFT7600 G2 KVM Console Rackmount Keyboard DK Monitor 

AZ876A 

HP TFT7600 G2 KVM Console Rackmount Keyboard NO Monitor 

AZ877A 

HP TFT7600 G2 KVM Console Rackmount Keyboard SE/FI Monitor 

AZ878A 

HP TFT7600 G2 KVM Console Rackmount Keyboard CH Monitor 

AZ879A 

HP TFT7600 G2 KVM Console Rackmount Keyboard PT Monitor 

AZ880A 

HP TFT7600 G2 KVM Console Rackmount Keyboard BE Monitor 

AZ881A 

HP TFT7600 G2 KVM Console Rackmount Keyboard JP Monitor 

AZ882A 

HP TFT7600 G2 KVM Console Rackmount Keyboard RU Monitor 

AZ883A 

HP TFT7600 G2 KVM Console Rackmount Keyboard Intl Monitor 

AZ884A 

HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor 

AZ885A 


QuickSpecs 




information: 


NOTE: For additional information regarding Rack Options, please see the 

following URL: http://www.hp.com/go/rackandpower 

HP Server Console Switch G2 with Virtual Media & CAC 

HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software 


information: 


(Worldwide) 

HP IP Console Switch G2 with Virtual Media & CAC 

HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software 

HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software 


information: 


(Worldwide) 

HP KVM Switches 

HP BladeSystem c-Class KVM Interface Adapter 

HP Server Console 0x2x8 Port Analog Switch 

HP Server Console 0x2x16 Port Analog Switch 


information: 


(Worldwide) 

HP 1x4 USB/PS2 KVM Console Switch 

HP 1x4 KVM Console 6ft USB Cable 

NOTE: required for supporting USB peripherals. 


information: 


(Worldwide) 

NOTE For additional information regarding KVM switches, Serial Console 

servers, rack mount monitors, keyboards and all related options please see the 

following URL: http://www.hp.com/go/kvm 

Rack Options 

HP Universal 10636 G2 Front Door 

NOTE: For additional information regarding Rack Options, please see the 

following URL: http://www.hp.com/go/rackandpower. 

AF618A 

AF621A 

AF622A 

AF605A 

AF616A 

AF617A 

AF611A 

AF613A 

AF019A 


QuickSpecs 



HP Care Pack Services NOTE: Some options, including Fibre Channel and InfiniBand switches for the 

HP c-Class BladeSystem, are not covered under the c3000 enclosure Care 

Packs and carry separate Care Packs. Care Pack service level support for 

these options should always be uplifted to match existing storage or server 

service level. 

Please view the option QuickSpecs or contact your HP sales representative or 

HP authorized ServiceOne partner for Care Pack information. 

Proactive Care Services 

HP 3 year 4 hour 24x7 c3000 Enclosure Proactive Care Service 

HP 3 year 6 hour Call To Repair 24x7 c3000 Enclosure Proactive Care Service 

HP 3 year 4 hour 24x7 c3000 Enclosure with Insight Control Proactive Care 

Service 

HP 3 year 6 hour Call To Repair 24x7 c3000 Enclosure with Insight Control 

Proactive Care Service 

HP Proactive Care Personalized Support (Environmental Option) 

HP 3yr Provides annual personalized proactive supp for existing Proactive Care 

ISS centric environmt 

Installation & Start-up Services 

HP Startup c3000 with Insight Control and Operating System and Server Blade 

Service 

HP Startup BladeSystem c3000 + Operating System Service 

HP Startup BladeSystem c3000 Enclosed Network Service 

HP Hardware Install c-Class Enclosure and Server Blade Service 

Additional HP Care Pack services can be found at: 

http://www.hp.com/go/cpc 

U3C42E 

U3C45E 

U3P19E 

U3P22E 

U6W98E 

UF817E 

UF818E 

UF814E 

UE494E 


QuickSpecs 


Power Specifications 

HP 1200W Common Slot Platinum Hot Plug Power Supply Kit 

Part Number 500172-B21 

Input Voltage Range ( V rms ) 100-240 

Frequency Range (Nominal) ( Hz ) 50 / 60 

Nominal Input Voltage ( Vrms ) 100 120 200 208 220 230 240 

Maximum Rated Output Wattage 800 900 1200 1200 1200 1200 1200 

Nominal Input Current ( A rms ) 9.1 8.4 6.7 6.4 6.1 5.8 5.5 

Maximum Rated Input Wattage Rating ( Watts ) 897 999 1321 1319 1317 1315 1314 

Maximum Rated VA ( Volt-Amp ) 909 1012 1338 1337 1334 1332 1331 

Efficiency ( % ) 89.2 90.1 90.9 91.0 91.1 91.2 91.3 

Power Factor 0.998 

Leakage Current ( mA ) 0.42 0.50 0.83 0.87 0.92 0.96 1.00 

Maximum Inrush Current (A peak ) 30 

Maximum Inrush Current duration ( mS ) 20 

Maximum British Thermal Unit Rating ( BTU-Hr ) 3061 3408 4506 4501 4493 4487 4483 




Frequency Range (Nominal) ( Hz ) 50 / 60 






Efficiency ( % ) 86 87 89 89 89 89 89 









Frequency Range (Nominal) ( Hz ) 

DC 






Efficiency ( % ) 86 87 89 89 89 89 89 







QuickSpecs 



NOTE: To review maximum system power ratings for facilities planning purposes use the HP Power Advisor which is 

available via the online tool located at URL: www.hp.com/go/HPPowerAdvisor 


QuickSpecs 


Technical Specifications 

Server Blade, Power Supply and Fan Population Guidelines 

Fan & power supply bay numbering 

HP BladeSystem c3000 Enclosure - Rack 

Power supply bay numbering 

Fan bay numbering 

Power Supplies & Fans must be placed in the following bays 

Number of Fans 

Fan Bays Used 

4 2,4,5, 6 

6 all bays filled 

Number of Power Supplies (for PS Redundant or nonredundant 

mode) 

Power Supply Bays Used 

2 1 & 2 

3 1, 2, & 3 

4 1, 2, 3, 4 

5 1 through 5 

6 All bays 

Number of Power Supplies (For AC Redundant mode) Place Power Supplies in bays: 

2 1 & 4 

4 1, 2, 4, & 5 

6 all bays filled 

NOTE: With four fans, the enclosure will support only 4 half-Height Server blades in the bottom half of the enclosure device 

bays. With six fans, all 8 server bays may be filled. 

NOTE: For correct operation, fans and server blades must be installed in the correct bays. The Onboard Administrator will 

ensure that fans and blades are correctly placed before allowing systems to power on. 


QuickSpecs 



Half-height server blade bay numbering 

HP BladeSystem c3000 Enclosure – Racks 

1. Device Bay 1 








NOTE: Half-height server blades should be populated from the bottom half of the enclosure, in the following order (bays 1, 

5, 2, 6, 3, 7, 4, & 8) 

Full-height server blade bay numbering 

HP BladeSystem c3000 Enclosure – Racks 





NOTE: Full-height servers should be populated from the bottom to the top (bays 1 thru 4). With four fans, only the bottom 

2 bays can be used; with six fans, all bays can be used. 


QuickSpecs 



Mixed Configuration – Full Height and Half Height Population 

The c3000 enclosure is divided into 2 zones or quadrants by the horizontal support metalwork. Zone 1 includes bays 1, 2, 

5, and 6; Zone 2 contains bays 3, 4, 7, and 8. Within each zone a removable divider is used to support half height devices. 

To install a full-height blade in either zone this divider must be removed. An optional mini-divider support bracket is 

included with every c3000 enclosure. When using a mix of full-height and half height blades in Zone 2, the optional minidivider 

can be used to help support the half-height blades if they are being used in slots 7 and/or 8. Each zone can support 

up to 2 full-height blades, or up to 4 half height blades, or a mix of 1 full-height blade and up to 2 half-height blades. 

NOTE: Please read the RTF card (included with each c3000 enclosure) and the "HP BladeSystem c3000 enclosure Setup 

and Installation Guide" for more information on using bay dividers and the mini-divider for mixed configurations. 

NOTE: Storage or tape blades can be installed in the same zone as both full-height and half-height blades, a bracket ships 

with each D2200sb that allows a half-height blade to be mounted to the storage or tape blade. 

NOTE: In this case, the D2200sb or tape blade cannot be removed without first removing the half height blade and 

mounting bracket. 

NOTE: For Mixed configurations of full height and half height population rules; please see the c3000 enclosure installation 

and users guide at: http://h71028.www7.hp.com/enterprise/cache/316682-0-0-0-121.html and the user guides for the 

blades being configured. 

Enclosure Unit – 

Rack Model 

Dimensions (H x W x 

D) 

(with bezel) 

Weight 

(approximate) 

Input Requirements 

(per AC power supply) 

BTU Rating 


Power Supply Output 

(per power supply) 

System Inlet 

Temperature 

10.4 x 19.1 x 32.977 in (265 x 485 x 835 mm) 

Maximum 

(one enclosure with 8 

blades and 4 

interconnects installed) 

Minimum 

(one enclosure without 

blades and 

interconnects) 

Rated Line Voltage 

Rated Input Current 

Rated Input Frequency 

Maximum per power 

supply 

300 lb (136 kg) 

130 lb (59 kg) 

90 – 132 VAC 

180 – 264 VAC 

9.3 A (at 100 VAC) 

9.7 A (at 120VAC) 

7.8 A (at 200 VAC) 

7.2 A (at 208 VAC) 

6.8 A (at 220 VAC) 

6.2 A (at 240 VAC) 

47 to 63 Hz 

2728 BTU/hr (at 100 VAC) 

3069 BTU/hr (at 120VAC) 

4092 BTU/hr (at 200 to 240 VAC) 

To review typical system power ratings use the Power Calculator which 

is available via the online tool located at URL: 

www.hp.com/go/bladesystem/powercalculator 

Rated Steady-State 

Power 

Maximum Peak Power 

Operating 

800 W (at 100 VAC) 

900 W (at 120 VAC) 

1200 W (at 200 to 240 VAC) 

880 W (at 100 VAC) 

990 W (at 120 VAC) 

1350 W (at 200 to 240 VAC) 

10° to 35°C (50° to 95°F) at sea level with an 

altitude derating of 1.0°C per every 305 m 

(1.8°F per every 1000 ft) above sea level to a 

maximum of 3050 m (10,000 ft), no direct 


QuickSpecs 



Relative Humidity 

(non-condensing) 

Non-operating 

sustained sunlight. Maximum rate of change 

is 10°C/hr (18°F/hr). The upper limit may be 

limited by the type and number of options 

installed. System performance may be 

reduced if operating with a fan fault or above 

30°C (86°F). 

-30° to 60°C (-22° to 140°F). Maximum rate 

of change is 20°C/hr (36°F/hr). 

Operating 10 to 90% relative humidity (Rh), 28°C 

(82.4°F) maximum wet bulb temperature, 

non-condensing. 

Non-operating 

5 to 95% relative humidity (Rh), 38.7°C 

(101.7°F) maximum wet bulb temperature, 

non-condensing. 

Altitude Operating 3050 m (10,000 ft). This value may be limited 

by the type and number of options installed. 

Maximum allowable altitude change rate is 

457 m/min (1500 ft/min). 

Acoustic Noise 

Non-operating 

9144 m (30,000 ft). Maximum allowable 

altitude change rate is 457 m/min (1500 

ft/min). 

Listed are the declared A-Weighted sound power levels (LWAd) and 

declared average bystander position A-Weighted sound pressure 

levels (LpAm) when the product is operating in a 23°C ambient 

environment. Noise emissions were measured in accordance with ISO 

7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 

109). 

Idle 

Operating 

depends on server configuration & mix of 

server blades 

varies by CPU utilization, server 

configuration, and mix of server blades 

Option Kits 

Power Supply 

Dimensions 

Fan Option Shipping 

Dimensions 

Size 

Weight 

Size 

Weight 

Height: 1.515 in (38.48 mm) 

Width: 3.4 in (86.36 mm) 

Depth: 7.5 in (190.5 mm) 

2.5 lbs (1.13 kg) 

Height: 8.75 in (223 mm) 

Width: 9.75 in (248 mm) 

Depth: 15.88 in (403 mm) 

4.0 lbs (1.8 kg) 


QuickSpecs 



Environment-friendly 

Products and 

Approach 

End-of-life 

Management and 

Recycling 

Hewlett-Packard offers end-of-life HP product return, trade-in, and 

recycling programs in many geographic areas. For trade-in information, 

please go to: http://www.hp.com/go/green. To recycle your product, 

please go to: http://www.hp.com/go/green or contact your nearest HP 

sales office. Products returned to HP will be recycled, recovered or 

disposed of in a responsible manner. 

The EU WEEE directive (2002/95/EC) requires manufacturers to 

provide treatment information for each product type for use by 

treatment facilities. This information (product disassembly instructions) 

is posted on the Hewlett Packard web site at: 

http://www.hp.com/go/green. These instructions may be used by 

recyclers and other WEEE treatment facilities as well as HP OEM 

customers who integrate and re-sell HP equipment. 

© Copyright 2013 Hewlett-Packard Development Company, L.P. 

The information contained herein is subject to change without notice. 

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon 

Inside are trademarks of Intel Corporation in the U.S. and other countries. AMD is a US registered trademark of AMD 

Corporation. 

The only warranties for HP products and services are set forth in the express warranty statements accompanying such 

products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for 

technical or editorial errors or omissions contained herein.

HP BladeSystem c3000 Enclosure - eD' system Czech, as

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?