Gravity Distribution - Zabel

800-221-5742 www.zabelzone.com

How to use this ZABEL PRODUCT CATALOG 

This catalog is organized into eight major divisions: 

Effluent Filters • Gravity Distribution • STEP Systems • Pressure Distribution • 

Risers & Lids • Tanks & Basins • Advanced Treatment • Onsite Tools 

In front of each division is a Intro 

page for that division. 

At the right edge of each product 

page is Additional Technical Information 

to aid in selecting the correct 

product or a place for your personal 

notes. 

ZABEL’s new popular Product Field 

Guide for the Onsite Wastewater 

Industry has matching product page 

numbers so catalog information is easily 

cross-referenced for the contractor in 

the field. 

ZABEL is always adding new products 

and has many more than are 

shown in this catalog. 

If you don’t see what you need, call, 

email or check our website for our up 

to date offerings. 


Quick Guide 

Effluent Filters 4-7 

Residential, Commercial & Industrial 

Gravity Distribution 8-10 

Versa-Tee Baffle 

Flow Director/Divider 

Distribution Boxes 

Dosing Siphons 

STEP Systems 11-21 

Pumps 

Filtered Pump Vaults 

Alarms & Controls 

Pump Packages 

Accessories 

Pressure Distribution 22-27 

Drip Irrigation 

Pressure Filter 

Distribution Valves 

Check & Ball Valves 

Orifice Shields 

Grommets 

Riser & Lids 28-34 

Heavy Duty 20”, 22” & 26” 

Economy 12”, 20” & 24” 

Tanks & Basins 35-37 

Fiberglass Tanks 

Polyethylene Basins 

Advanced Treatment 38-43 

SCAT ® Biofilter ® 

SCAT Bio-COIR TM 

Gravity Recirculation Devices 

Chlorinator 

Carbon Filters 

Air Compressors 

Onsite Tools 44-48 

800-221-5742 www.zabelzone.com 

3

Effluent Filters 

Intro Page 

4 

5 

3 

“The use of a removable, cleanable 

effluent screen connected to the 

outlet is strongly recommended.” 

US EPA Onsite Wastewater 

Treatment System Manual 

Gravity Distribution 

1 

ZABEL Environmental Technology ® Pioneering filter 

technology since 1959, Zabel Effluent Filters are 

the most recognized and trusted name in onsite 

wastewater filtration. The Zabel ® Filter line has 

evolved from a single disc dam filter into a complete 

line of over 80 Effluent Filters to fit every 

wastewater application. 

With over one million filters installed throughout 

the US and abroad, Zabel is the source for all your 

wastewater filtering needs. 

Patented inside-out flow Zabel’s patented flow 

reduces the trapping of solids in the filter by allowing 

them to slough off and fall back into the 

tank for further digestion. Slots rather than mesh 

screens provide less surface area for solids to attach 

and promote the sloughing action. Independent 

research has shown the Zabel A1800 TM Series 

Filters reduce TSS by 40% in residential applications. 

1 4” page 4 

2 Filter Packages page 4 

3 8” page 5 

4 12” page 6 

5 Accessories page 7 

Residential 

Application 

Certified to 

NSF/ANSI 

Standard 46 

Intro Page 

1 

ZABEL ® Gravity Distribution products are found in 

virtually all onsite wastewater systems. These range from 

the unique Versa-Tee inlet and outlet device that accepts 

either SDR 35 or SCH 40 pipe in gravity tanks to the Flow 

Divider/Director which allows equal or directed flows as 

needed. Other products include siphons and distribution 

boxes, along with the necessary seals and levelers that 

solve design problems for many systems. 

2 

4 

1 Versa-Tee Baffles page 8 

2 Flow Dividers/Directors page 8 

3 Distribution Boxes page 9 

4 Dosing Siphons page 11 

3 


Effluent Filters - 4” 

1/16” Filtration 

A1801-4x18 

4” x 18” Filter Cartridge 

A1800-4x18-VT-B35 

Includes: 4 x 18 Filter 

Cartridge, Versa-Tee, SDR 

35 Ext 

A1800-4x18-VT-B40 

Includes: 4 x 18 Filter 

Cartridge, Versa-Tee, SCH 

40 Ext 

Filter Packages 

A1801-4x22 

4” x 22” Filter Cartridge 

A1800-4x22-VT-B35 

Includes: 4 x 22 Filter Cartridge, 

Versa-Tee, SDR 35 Ext 

A1800-4x22-VT-B40 

Includes: 4 x 22 Filter Cartridge, 

Versa-Tee, SCH 40 Ext 

Specifications 

4” Diameter Filters 

All Part #’s 

GPD: 800 / FS: 1/16” 

GPD = Maximum Gallons Per Day 

FS = Filtration Size 

Features 

• Perfect for single family residences 

• A1801’s fit into any 4” outlet tee 

• A1800’s slough most normal solids 

back into the tank when the effluent 

flow is in a resting state 

• Average of 40% TSS reduction within 6 

months of installation 

• All Zabel ® Filters accept SmartFilter ® 

alarm switch 


A1800-4x22-VT-B35-FP 

Components: A1800-4x22-VT-B35, 

RB-B-22x38, RB-L-22, *GDS-GT-4.0-35, 

*GDS-GT-4.0-40 

A100-8x18-VC-FP 

Components: A100-8x18-VC, RB- 

B-22x38, RB-L-22, *GDS-GT-4.0-35, 

*GDS-GT-4.0-40 

A100-12x20-VC-FP (not shown) 


B-26x38, RB-L-26, *GDS-GT-4.0-35, 

*GDS-GT-4.0-40 



B-22x38, RB-L-22, *GDS-GT-4.0-35, 

*GDS-GT-4.0-40 

A300-12x20-VC-FP 


B-26x38, RB-L-26, *GDS-GT-4.0-35, 

*GDS-GT-4.0-40 



B-22x38, RB-L-22, *GDS-GT-4.0-35, 

*GDS-GT-4.0-40 



B-26x38, RB-L-26, *GDS-GT-4.0-35, 

*GDS-GT-4.0-40 

A1800-4x22-VT-B35-FP 

A100-8x18-VC-FP 

A300-12x20-VC-FP 

All Filter packages may be ordered for any series Filter by 

simply adding “-FP” after the Filter part number. All Filter packages 

include a basin, lid, neoprene gasket, and security screws. 


* Each filter package includes two 4” 

grommets please specify SDR 35 or 

SCH 40 when ordering. 

Features 

• Ideal for retrofitting an effluent filter to 

an existing onsite system 

• Each “ZABEL in a Can” includes all necessary 

componets required to install a 

filter outside of the septic tank 

Important 

• When adding risers together for deeper 

installations Zabel does not recommend 

exceeding a maximum depth 

of 48”. 

• Neoprene gaskets must be installed as 

per instructions 

• To prevent unauthorized entry install 

all tamper resistant fasteners as per 

instructions 

PRODUCT WARRANTY 

All Zabel Filters carry a limited 

lifetime warranty. 

See page 50 for details. 

4


1/16” Filtration 1/32” Filtration 



A100-8x18-VC 

A100-8x18-VC 

Includes: 8” x 18” Filter 

Cartridge, Versa-Case ® 

and Handle Kit 

A100-8x26-VC 


Cartridge, Versa-Case 


A100-8x32-VC 




A600-8x18-VC 



SmartFilter ® Alarm and 

Handle Kit 

A600-8x26-VC 



SmartFilter Alarm and 

Handle Kit 

A600-8x32-VC 




Handle Kit 

A300-8x18-VC 




A300-8x26-VC 




A300-8x32-VC 




1/64” Filtration Replacement Cartridges 

5 

8” replacement 

cartridges available 

in all lengths simply 

by replacing the 

A100 in the part 

number with A101, 

A301 or A601. 

Also drop the “-VC” 

from the end of the 

filter part number. 

Examples 

A101-8x18 

A301-8x26 

A601-8x32 


GPD: 1200 / FS: 1/16” 

A100-8x26-VC 

GPD: 1800 / FS: 1/16” 

A100-8x32-VC 

GPD: 2400 / FS: 1/16” 

Features 

• Patented effluent filter for residential 

or light commercial applications 

• Average of 50% to 90% reduction in 

TSS within 6 months of installation 


BOD5 within 6 months of installation, 

reduction is dependent on the makeup 

of the wastewater 

A300-8x18-VC 

GPD: 1200 / FS: 1/32” 

A300-8x26-VC 

GPD: 1800 / FS: 1/32” 

A300-8x32-VC 

GPD: 2400 / FS: 1/32” 

Features 

• Patented effluent filter for light commercial, 

grease traps and in conjunction 

with advanced treatment systems 








FOG within 6 months of installation 

• All Zabel ® Filters accept SmartFilter ® 

alarm switch 

A600-8x18-VC 

GPD: 1200 / FS: 1/64” 

A600-8x26-VC 

GPD: 1800 / FS: 1/64” 

A600-8x32-VC 

GPD: 2400 / FS: 1/64” 

Features 

• Specialty effluent filter with the finest 

level of filtration available in the 

industry 

• Primarily used for final polishing of effluent 

or removal of very fine particles 

• Due to potential service requirements 

available only with a SmartFilter 

Alarm 

• ZABEL does not recommend the A600 

Series filter be utilized in a primary 

septic tank 

Versa-Case outlet hubs accept either 

4” or 6” SCH 40 PVC pipe 






See page 50 for details.


1/16” Filtration 1/32” Filtration 

A100-12x20-VC 




A100-12x28-VC 




A100-12x36-VC 




All Zabel Filters 

can be installed 

in multiples when 

larger flow rates are 

required. 

Supplemental support 

is necessary on 

the larger Filters. 

A300-12x20-VC 




A300-12x28-VC 




A300-12x36-VC 




1/64” Filtration Replacement Cartridges 

A600-12x20-VC 



SmartFilter ® Alarm and 

Handle Kit 

A600-12x28-VC 




Handle Kit 

A600-12x36-VC 




Handle Kit 

12” replacement 

cartridges available 

in all lengths simply 

by replacing the 

A100 in the part 

number with A101, 

A301 or A601. 

Also drop the “-VC” 

from the end of the 

filter part number. 

Examples 

A101-12x20 

A301-12x28 

A601-12x36 




A100-12x20-VC 

GPD: 3000 / FS: 1/16” 

A100-12x28-VC 

GPD: 4500 / FS: 1/16” 

A100-12x36-VC 

GPD: 6000 / FS: 1/16” 

Features 

• The original Zabel ® Filter patented in 1959 

• Primarily used for single family 

residential, apartments, trailer parks, 

schools, churches, shopping centers, 

and office buildings 







• All Zabel Filters accept SmartFilter ® 

alarm switch 

A300-12x20-VC 

GPD: 3000 / FS: 1/32” 

A300-12x28-VC 

GPD: 4500 / FS: 1/32” 

A300-12x36-VC 

GPD: 6000 / FS: 1/32” 

Features 

• Ideal effluent filter for use in grease 

traps, dog kennels, beauty shops, and 

laundromats 








FOG within 6 months of installation 

A600-12x20-VC 

GPD: 3000 / FS: 1/64” 

A600-12x28-VC 

GPD: 4500 / FS: 1/64” 

A600-12x36-VC 

GPD: 6000 / FS: 1/64” 

Features 

• Specialty effluent filter with the finest 

level of filtration available in the industry 

• Primarily used for final polishing of effluent 

or removal of very fine particles 

• Due to potential service requirements 

available only with a SmartFilter 

Alarm 

• ZABEL does not recommend the A600 

Series filter be utilized in a primary 

septic tank 

Versa-Case outlet hubs accept either 

4” or 6” SCH 40 PVC pipe 







6

Effluent Filters 

Accessories 


SmartFilter ® Alarms 

AC-A-I-SF (indoor use) 

Handle Extension kits 

PV: 120 VAC, 50/60 Hz / SV: 12 VAC 

/ AE: 6x4x2.5 inch NEMA 1 / AH: 88 

decibels at 10’ / PC: 6’ / FSCT: For float 

switch connection only. Do not apply 

power. (Voltage across terminals is 12 

VAC) S: SmartFilter switch with 10’ cord 

A1801-HEK 

4” Handle Extension Kit 

Longer handles available on request 

for deeper installations. 

Not included with 4” filter purchase 

A101/301/601-HEK 

8” & 12” Handle Extension Kit 

Longer handles available on request 

for deeper installations. 

Included with all 8” and 12” filters 

SmartFilter ® Alarms 

AC-A-O-SF (indoor or outdoor use) 

V: 120 VAC, 50/60 Hz, 7 watts max. 

(alarm condition) / AE: 6.5x4.5x3 inch 

indoor-outdoor / AH: 82 decibels at 

10’ / AB: Meets Type 3R water-tight 

standards as installed by factory / S: 

SmartFilter switch with 10’ cord 

Features 

• Provides audible and visual notification 

of impending filter and tank servicing 

• Patented SmartFilter switch attaches to 

all Zabel Filters 

• Alarm sounds when tank and filter reach 

90% maturity 

PV = Primary Voltage 

SV = Secondary Voltage 

V = Voltage 

AE = Alarm Enclosure 

AH= Alarm Horn 

AB= Alarm Beacon 

PC= Power Cord 

FSCT= Float Switch Connection 

Terminal 

S = Switch 

All Filters 

are 

SmartFilter 

Ready! 

AC-A-I-SF 

Indoor SmartFilter Alarm 

AC-A-O-SF 

Outdoor SmartFilter Alarm 

Tamper Seal 

7 

SEAL 



Handle Extensions - 1 Year 

SmartFilters Alarms - 3 Year 



Versa-Tee ® Baffle Flow Divider/Director 


Versa-Tee 

Features 

• Patented design allows attachment to 

either 4” SDR 35 or SCH 40 pipe 

• May be used on the inlet and/or outlet 

of all tanks 

• Pre-assembled tee baffles available with 

SDR 35 or SCH 40 extensions 

GDS-VT 

Versa-Tee Baffle 

GDS-Z300 

Flow Divider 

Flow Divider/Director 

Features 

• GDS-Z300 utilizes a central weir to 

divide effluent evenly between two 

openings under 

gravity flow conditions 

• GDS-Z300D may be used to alternate 

between two fields with a patented 

sleeve valve 

• Patented design allows attachment to 

either 4” SDR 35 or SCH 40 pipe 

• Monitoring hub may be extended to 

grade for easy viewing and adjustments 

• Laboratory test results conducted by Dr. 

Bob Rubin Ed.D on the GDS-Z300 using 

1000 ml samples at 3 gpm: 

POS RPD LPD 

Level 50.03% 49.97% 

1/16” Tilt 50.2% 49.8% 

1/8” Tilt 51.3% 48.7 

POS = Position 

RPC = Right Port Distribution 

LPD = Left Port Distribution 

GDS-Z300D 

Flow Director 

GDS-VT-B35 

Versa-Tee Baffle w/SDR 35 Extension 

GDS-VT-B40 

Versa-Tee Baffle w/SCH 40 Extension 



Versa-Tees - 1 Year 

Flow Director/Divider- 2 Year 


8



GDS-DB-4L 

4 Hole Level Box 

GDS-DB-7L 



GDS-DB-4L 

Includes: 1 SCH 40, 3 SDR 35 and 1 Plug 

GDS-DB-4D 

Includes: 1 SCH 40, 3 SDR 35 and 1 Plug 

GDS-DB-6L 

Includes: 1 SCH 40, 5 SDR 35 and 2 Plugs 

GDS-DB-7L 


GDS-DB-9L 


Features 

• Equal flow and drop boxes for distributing 

effluent to drain field 

• Use in conjunction with Speed Levelers 

to achieve optimum distribution 

• Each box includes appropriate number of 

patented snap-in seals 

D-Box 

Seals 

page 10 

GDS-DB-4D 

4 Hole Drop Box 

GDS-DB-9L 


9 

GDS-DB-6L 




Distribution Boxes - 1 Year 



D-Box Seals 

GDS-PS-4.0-35 

4” SDR 35 Pipe Seal - Blue 

GDS-PS-4.0-40 

4” SCH 40 Pipe Seal - Yellow 


GDS-DS-3T 

3” Dosing Siphon 


D-Box Seals 

GDS-PS-4.0-35 

4” SDR 35 Pipe Seal - Blue 

GDS-PS-4.0-40 

4” SCH 40 Pipe Seal - Yellow 

GDS-PP-4.0 

4” Pipe Plug - Orange 

GDS-SL-4.0 

4” Speed Leveler - Yellow/Black 

Features 

• Equal flow and drop boxes for distributing 

effluent to drain field 

• Use in conjunction with Speed Levelers 

to achieve optimum distribution 

• Each box includes appropriate number of 

patented snap-in seals 


GDS-DS-3T 

13” draw down, 72 gpm average discharge 

rate, 48 gpm minimum discharge rate 

GDS-DS-4T 

13” draw down, 140 gpm average discharge 

rate, 100 gpm minimum discharge rate 

Features 

GDS-DS-3T 

• Provide dosing and resting cycles to 

soil absorption fields, sand filters and 

other onsite systems without the use of 

electricity 

• Operates only under conditions where 

discharge pipe runs flat or downhill from 

the siphon 

GDS-DS-4T 

• Provide dosing and resting cycles to 

soil absorption fields, sand filters and 

other onsite systems without the use of 

electricity 

• Installs directly into the tank via a variety 

of methods 

• Operates only under conditions where 

discharge pipe runs flat or downhill from 

the siphon 

GDS-PP-4.0 

4” Pipe Plug - Orange 

GDS-SL-4.0 

4” Speed Leveler - Yellow/Black 

GDS-DS-4T 

4” Dosing Siphon 



All Products this page - 1 Year 


10

STEP Systems 

3 

4 

Intro Page 

ZABEL ® STEP (Septic Tank Effluent Pumping) Systems 

are ideally suited for all onsite wastewater 

pumping applications, from single family residential 

to small diameter collection systems. ZABEL STEP 

Systems are available as individual components or 

pre-assembled in ready-to-install System Packages. 

2 

5 

Pressure Distribution 

2 

1 

ZABEL STEPS are ideally suited for: 

Drainfields 

Effluent sewers 

Sand filters 

Peat filters 

Packed bed filters 

Mounds 

Trickling filters 

Aerobic units 

Wetlands 

Lagoons 

Effluent irrigation 

Other applications 

1 Pumps page 11 

2 Filtered Pump Vaults page 12 

3 Alarms and Controls page 14 

4 Pump Packages page 16 

5 Accessories page 19 

Intro Page 

ZABEL ® Pressure Distribution components provide 

maximum options for the design and construction 

of pressure distribution wastewater dispersal systems. 

Pressure distribution is the most efficient way to dispose 

of wastewater by spreading it over the entire area. This 

eliminates the concern of hydraulic overloading often 

experienced with gravity-fed dispersal systems. 

1 Drip Irrigation page 22 

2 Pressure Filters page 25 

3 Distribution Valves page 26 

4 Check & Ball Valves page 27 

5 Orifice Shields page 27 

6 Grommets page 27 

3 

1 


STEP Systems 

Pumps 

Submersible Sump 

P-SU-13T 

Submersible Sewage 

P-SS-41T 

P-SS-12T 

P-SS-34T 

Submersible Effluent 

P-SE-13T 

P-SE-41T 

P-SE-12T 

P-SE-10T 

Turbine Effluent 

P-TE-10 

P-TE-20 

P-TE-30 

P-TE-50 

P-TE-10-PLUS 

P-TE-20-PLUS 

P-TE-30-PLUS 


Submersible Pumps 

P-SU-13T 

M: 1/3 HP / E: 115V, 1Ph, 60Hz / 

SH: 1/2” / PC: 10’ / D: 1-1/2” 

P-SS-41T 

M: 4/10 HP / E: 115V, 12.5FLA, 1Ph, 

60Hz / SH: 2” / PC: 10’ / D: 2” 

P-SS-12T 

M: 4/10 HP / E: 115V, 13.0FLA, 1Ph, 

60Hz / SH: 2” / PC: 10’ / D: 2” 

P-SS-34T 

M: 3/4 HP / E: 115V, 13.0FLA, 1Ph, 

60Hz / SH: 2” / PC: 20’ / D: 2” 

P-SE-13T 

M: 1/3 HP / E: 115V, 12.0FLA, 1Ph, 

60Hz / SH: 3/4” / PC: 10’ / D: 1-1/2” 

P-SE-41T 

M: 4/10 HP / E: 115V, 10.0FLA, 1Ph, 

60Hz / SH: 3/4” / PC: 20’ / D: 2” 

P-SE-12T 

M: 1/2 HP / E: 115V, 12.0FLA, 1Ph, 

60Hz / SH: 3/4” / PC: 20’ / D: 2” 

P-SE-10T 

M: 1 HP / E: 230V, 6.6FLA, 1Ph, 60Hz / 

SH: 3/4” / PC: 20’ / D: 2” 

Turbine Pumps 

P-TE-10 

M: 1/2 HP / E: 115V, 12.0FLA, 1Ph, 

60Hz / SH: 1/8” / PC: 10’ / D: 1-1/4” 

P-TE-20 

M: 1/2 HP / E: 115V, 12.0FLA, 1Ph, 

60Hz / SH: 1/8” / PC: 10’ / D: 1-1/4” 

P-TE-30 

M: 1/2 HP / E: 115V, 12.0FLA, 1Ph, 

60Hz / SH: 1/8” / PC: 10’ / D: 1-1/4” 

P-TE-50 

M: 1/2 HP / E: 115V, 12.0FLA, 1Ph, 

60Hz / SH: 1/8” / PC: 10’ / D: 2” 

P-TE-10 Plus 

M: 1/2 HP / E: 115V, 11.0FLA, 1Ph, 

60Hz / SH: 1/8” / PC: 10’ / D: 1-1/4” 

P-TE-20 Plus 

M: 1/2 HP / E: 115V, 9.5FLA, 1Ph, 60Hz 

/ SH: 1/8” / PC: 10’ / D: 1-1/4” 

P-TE-30 Plus 

M: 1/2 HP / E: 115V, 9.5FLA, 1Ph, 60Hz 

/ SH: 1/8” / PC: 10’ / D: 1-1/4” 

M = Motor 

E = Electrical 

SH = Solids Handling 

PC = Power Cord 

D = Discharge 



Pumps- 2 Year 


11

STEP Systems 

Pumps 

Hanging FPVs 

12 

FPV-H36-2 

36” hanging vault with 2 filtered plates. 

FPV-H36-4 

same as above but with 4 filter plates 

FPV-H44-2 


FPV-H44-4 


FPV-H50-2 


FPV-H50-4 


FPV-H56-2 


FPV-H56-4 


FPV-H62-2 


FPV-H62-4 


FPV-H68-2 


FPV-H68-4 


FPV-H84-2 


FPV-H84-4 


FPV-H102-2 


FPV-H102-4 


All Part #’s 



High density non-corrosive polyethylene 

plastic with stainless steel screws 

Features 

• Hanging filtered pump vault installs into 

primary or pump tanks 

• Protects pump and disposal field from 

solids larger than 1/16” 

• Available with either 2 or 4 filter plates 

• Includes maintenance plate for servicing 

ease 


FPVs - 2 Year 

All FPVs when used with a 

Zabel pump - 10 year 


STEP Systems 

Filtered Pump Vaults 

Self-Cleaning FPVs 

FPV-H40-SC 

40” hanging self cleaning vault 

FPV-H48-SC 


FPV-H54-SC 


FPV-H60-SC 


FPV-H66-SC 


FPV-H72-SC 



Self cleaning FPVs 

All part #’s 

Effluent Discharge Assembly Includes: 

1/2” PVC return line, 0-30 psi pressure 

gauge, 1/2” ball valve 

Features 

• Hanging filtered pump vault with selfcleaning 

filter 

• Patented self-cleaner diverts effluent 

from discharge to provide cleaning action 



• Virtually maintenance free 

• Requires 8 psi head pressure for proper 

operation 

Interlocking FPVs 

FPV-I36-2,FPV-I36-4 

High density non-corrosive polyethylene 

plastic with stainless steel screws 

Features 

• Interlocks to 26” diameter risers and 

basins 



• May be installed in primary or dose tanks 

• Available with either 2 or 4 filter plates 

• Includes maintenance plate for servicing 

ease 

Interlocking FPVs 

FPV-I36-2 

36” Interlocking vault with 2 filter 

plates 

FPV-I36-4 




FPVs - 2 Year 

All FPVs when used with a 

Zabel pump - 10 year 


13

STEP Systems 


AC-A-I 

Indoor Alarm w/float 

AC-A-I-SF 

Indoor SmartFilter 

Alarm 

AC-A-PED 

Outdoor Alarm 

Pedestal w/float 

High Water Alarms 

AC-A-O 

Outdoor Alarm 

w/float 

AC-A-O-SF 

Outdoor SmartFilter 

Alarm 

AC-SFS 

SmartFilter Switch 

AC-A-PED-PMS 

Outdoor Alarm Pedestal 

w/Alarm & Pump float 


AC-A-I (indoor use) 

P: Primary 120 VAC, 50/60 Hz, 6.5 

watts max. (alarm condition), Secondary 

12 VAC / AE: 6x4x2.25 inch / AH: 

88 decibels @ 10’ / PC: 6’ / FC: 15’ 

flexible 18 gauge, 2 conductor (UL) 

SJOW water resistant (CPE) / 

S: Mercury Float Switch 

Features 

• Red warning light, green “power on” light, 

alarm test switch, and horn silence switch 

AC-A-O (indoor or outdoor use) 

P: 120 VAC, 50/60 Hz, 7 watts max. 

(alarm condition) / AE: 6.5x4.5x3.0 

inch / AH: 82 decibels @ 10’ / AB: 

Meets Type 3R water-tight standards as 

installed by factory / FC: 15’ flexible 18 

gauge, 2 conductor (UL) SJOW water resistant 

(CPE) / S: Mercury Float Switch 

Features 

• Red warning beacon, alarm test switch, and 

horn silence switch 

• Includes mercury float 

AC-A-I-SF (indoor use) 

P: Primary 120 VAC, 50/60 Hz / 

Secondary 12 VAC / AE: 6x4x2.5 inch 

NEMA 1 / AH: 88 decibels at 10’ / PC: 

6’ / FSCT: For float switch connection 

only. Do not apply power. (Voltage 

across terminals is 12 VAC) S: SmartFilter 

switch with 10’ cord 

AC-A-O-SF (indoor or outdoor use) 

P: 120 VAC, 50/60 Hz, 7 watts max. 

(alarm condition) / AE: 6.5x4.5x3 inch 

indoor-outdoor / AH: 82 decibels at 10’ 

/ AB: Meets Type 3R water-tight standards 

as installed by factory / 

S: SmartFilter switch with 10’ cord 

Features 

• Provides audible and visual notification of 

impending filter and tank servicing 

• Patented SmartFilter switch attaches to all 

Zabel Filters 

• Alarm sounds when tank and filter reach 

90% maturity 

AC-A-PED & AC-A-PED-PMS 

P: 120 VAC, 50/60 Hz / AE: 5”x5”x4’ 

inch NEMA 1 / AH: 83-85 decibels at 10’ 

/ FC: 20’, flexible 18 gauge, 2 conductor 

(UL) SJOW water resistant PVC housing 

Features 

• Pedestal high water alarm for outdoor use 

• Pull out assembly for easy wiring 

• Convenient Test/Normal/Silence switch 

mounted externally 

• Receptacle for 120V pump (on PMS only) 

• Mercury high water float 

• AC-A-PED-PMS includes pump float 

• 360 o audio/visual check for alarm condition 

P = Power 


AH = Alarm Horn 

AB= Alarm Beacon 

PC = Power Cord 

FC = Float Cord 

S = Switch 

14 



Alarms- 2 Year 


STEP Systems 


Control Panels 


AC-CP-S-S 

P: Pump 120/208/240V, 0-15FLA • Alarm 120V / 

AE: Measures 8x6x4 inches, NEMA 4X 

Features 

• Includes on/off and high water alarm floats 

• Audible and visual alarm 

• HOA switch for manual pump control 

• Separate pump and alarm circuit terminal blocks 

AC-CP-S-S 

Simplex Switch Panel 

AC-CP-S-C 



Features 

• Magnetic motor contactor pump control 

• Includes on, off and high water alarm floats 




• Circuit breaker provides pump disconnect and 

branch circuit protection 

AC-CP-S-C 

Simplex Contactor Panel 

AC-CP-S-C-T 

Simplex Contactor Timed Panel 

AC-CP-S-C-T 



Features 

• Standard configuration includes on/off, timer override 

and high water floats 



• Circuit breaker provides pump disconnect and 

branch circuit protection 

• Elapsed time meter 

• Counter 

AC-CP-D-C 



Features 

• Magnetic motor contactor pump control 

• Includes lag/alarm, lead, stop floats 




• Circuit breaker provides pump disconnect and branch 

circuit protection 

• Duplex alternating pump control 

AC-CP-D-C 

Duplex Contactor Panel 

AC-CP-D-C-T 

Duplex Contactor Timed Panel 

AC-CP-D-C-T 



Features 

• Standard configuration includes on/off, timer override 

and high water floats 



• Circuit breaker provides pump disconnect and branch 

circuit protection 

• Duplex alternating pump control 

• Elapsed time meter 

• Counter 

P = Power 



Control Panels- 2 Year 



15

STEP Systems 

Effluent Pump Packages 

FPV Packages 

ZS-100 

ZS-110 

Basin Packages 

ZS-300 


ZS-100 

Includes: 1/3 h.p. Effluent Pump, 44” FPV, 

26”x2” Tank Adapter, 26”x12” Riser, 26” L id, 

1.5” Effluent Discharge, 1.5” Grommet, Junction 

Plug Box, Indoor/Outdoor High Water Alarm 

ZS-110 

Includes: same as ZS-100 but with Pump 

ugrade to 1/2 h.p. 

Features 

• Designed for most onsite applications where 

simply lifting effluent uphill is required 

• Includes all components for pump installation 

into either a primary tank or pump 

tank 

• Retrofit tank adapter allows installation into 

existing concrete tanks 

• Additional risers may be added for deeper 

installations 

ZS-300 

Includes: 1/3 h.p. Submersible Effluent Pump, 

38” Basin, 26”x12” Riser, 26” Lid, 1.5” Effluent 

Discharge, Junction Plug Box, Indoor/Outdoor 

High Water Alarm, Control Panel, 1.25”, 1.5” 

and 4” Grommets. 

ZS-310 

Includes: same as ZS-300 above plus 36” 

Interlocking Filtered Pump Vault. 

Features 

• Ideal for repairs and sites with limited 

space 

• Small lift station may be used to provide 

small doses to a disposal field 

• Includes all components required to install 

a pump outside a tank 


installations 

16 

FPV Basin Packages 

ZS-310 



Pump - 3 Years 

Alarms/Controls - 3 Years 

Risers and Lids - 2 Years 

All other components - 2 Years 


STEP Systems 

Turbine Pump Packages 

FPV Packages 

ZS-200-10/20/30 


ZS-200-10/20/30 

Includes: 1/2 h.p. 10, 20 or 30 gpm Turbine 

Effluent Pump, 44” FPV, 26”x2” tank adapter, 

26”x12” Riser, 26” Lid, 1.25” Turbine Discharge, 

Junction/Splice Box with 4 Cord Grips, Simplex 

Contactor Control Panel, 1.25” and 1.5” Grommets. 

Features 

• Designed for higher performance onsite 

systems where high heads are required 

• Includes all components for pump installation 

into either a primary tank or pump 

tank 


installations 

ZS-400 

Includes: 1/2 h.p. 10, 20 or 30 gpm Turbine Effluent 

Pump, 38” Basin, 26”x12” Riser, 26” Lid, 

1.25” Turbine Discharge, Junction/Splice Box 

with 4 Cord Grips, Simplex Contactor Control 

Panel, 1.25”, 1.5” and 4” Grommets. 

ZS-410 

Includes: same as ZS-400 above plus 36” 

Interlocking Filtered Pump Vault. 

Basin Packages 

ZS-400-10/20/30 

Features 

• Designed for higher performance onsite 

systems where high heads are required 

• Ideal for repairs and sites with limited 

space 

• Small lift station may be used to provide 

small doses to a disposal field 

• Includes all components required to 

install a pump outside a tank 

• Additional risers may be added for 

deeper installations 

FPV Basin Packages 

ZS-410-10/20/30 








17

STEP Systems 

Fiberglass Pump Packages 

Effluent 

ZS-125-EPP 

ZS-250-EPP 

ZS-400-EPP 

ZS-650-EPP 

Sewage 

ZS-125-SPP 

ZS-250-SPP 

ZS-400-SPP 

ZS-650-SPP 


Effluent 

ZS-125-EPP, ZS-250-EPP, ZS- 

400-EPP, ZS-650-EPP 

Available in 125, 250, 400 & 650 gallon sizes, 

1/3 h.p. Effluent Pump, 36” FPV, Pump Vault 

Adapter Ring, 1.5” Effluent Discharge, 1.5” 

Grommet, Junction Box, Indoor/Outdoor High 

Water Alarm 

Sewage 

ZS-125-SPP, ZS-250-SPP, ZS- 

400-SPP, ZS-650-SPP 


1/2 h.p. Submersible Sewage Pump, 2.0” Effluent 

Discharge, 2.0” Grommet, Junction Box, 

Indoor/Outdoor High Water Alarm 

Features 

• Simple demand dose operation the use 

of a single on/off float 

• Pump float and high water float conveniently 

wired through a plugger splice 

box 

• Effluent package includes a pump vault 

to protect the pump and drainfield from 

solids 

• The sewage sump pump will pass solids 

up to 2” in diameter. 

• Also available in 250, 400 and 650 gallon 

models 

18 

Turbine 

ZS-125-TPP 

ZS-250-TPP 

ZS-400-TPP 

ZS-650-TPP 

ZS-FPV-AR 

Fiberglass Pump Vault adapter ring 

Turbine 


ZS-125-TPP, ZS-250-TPP, ZS- 

400-TPP, ZS-650-TPP 


10, 20 or 30 GPM Turbine Pump, 36” FPV, 

Adapter Ring, 1.25” Turbine Discharge, 1.25” 

Grommet, 1.5” Grommet, Junction/Splice Box 

w/4 connections, Simplex Contactor Control 

Panel w/3 floats 

Features 

• Simple demand dose operation using 

two floats, one each for on and off 

• Pump float and high water float conveniently 

wired through a plugger splice 

box 

• Turbine package has a simplex contactor 

control panel that controls pump operation 

and high water notification. 

Common Features 

• Each plug and play pump package is 

pre-plumbed and pre-wired for fast 

installation 

• The effluent and turbine packages 

includes a filtered pump vault to protect 

the pump and field from solids 

• All three also available in 250, 400 and 650 

gallon models 







STEP Systems 

Accessories 

Junction/Splice/ 

Plugger boxes 

AC-JSB-3 

Junction/Splice box w/3 Connectors 

AC-JSB-4 



Junction Boxes 

AC-JSP-3/4 

L&B: 1/2” UL approved, CSA Certified round 

cable liquid-tight strain relief connectors • 1-1/2” 

terminal adapter hub 

Features 

• NEMA 4X enclosure rated for outdoor use 

• Available with 3 or 4 liquid tight connectors 

AC-JSP-5 

L&B: 1/2” UL approved, CSA Certified round 

cable liquid-tight strain relief connectors • 2” 

terminal adapter hub 

Features 


• Available with 5 liquid tight connectors 

Plugger Box 

AC-JPB 

E: 2” terminal adapter hub / V: 120 VAC 

- primary / R: 120 VAC - NEMA type 5-15; 230 

VAC NEMA type 

Features 


• Hinged cover for convenience 

• Receptacle for pump & float switch 

L&B = Lid & Box 

E = Enclosure 

V = Voltage 

R = Receptacle 

AC-JSB-5 


AC-JPB 

Plugger Box 



Junction/Splice Boxes - 3 Years 

Plugger Box - 3 Years 


19

STEP Systems 

Accessories 

Wire Harness 

AC-WH-7S 

7 Strand, 14 Gauge Wire Harness 

Alarm Switches 

AC-WH-12S 

12 Strand, 14 Gauge Wire Harness 


Alarm Switches 

AC-SFS 

PC - 10’ 

Features 

• For use with indoor/outdoor alarm 

• Fits into any Zabel Effluent Filter 

• Minimum of 3” drop required in tank for 

proper SmartFilter operation 

AC-VMS 

E - 120 VAC 50/60 Hz Single Phase; 13 amp 

max. pump running current; 60 amp max. pump 

starting current / 230 VAC 50/60 Hz Single 

Phase; 12 amp max. pump running current; 60 

amp max. pump starting current / PC - Flexible 

16 gauge, 2 conductor (UL, CSA) SJOW 

Features 

• Mechanically activated pump switch 

• Adustable pumping range .75 to 6.5 

inches 

Float Trees 

AC-SFS 

SmartFilter Switch 

AC-VMS 

Vertical Float 

Switch 

AC-PMS 

Pump Float Switch 

with Piggy-Back Plug 

AC-PMS 

E - 120 VAC 50/60 Hz Single Phase, 1/2 HP or 

less recommended pump HP; 230 VAC 50/60 

Hz Single Phase, 1 HP or less recommended 

pump HP / PC - Flexible 16 gauge, 2 conductor 

(UL, CSA) SJOW 

Features 

• Mechanically activated pump switch 

• Adustable pumping range 7 to 36 inches 

AC-MFS 

E - 5 amp, 120/230 VAC, 50/60 Hz / PC - Flexible 

18 gauge, 2 conductor (UL, CSA) SJOW 

/ MWD - 30 feet, 13 psi / MTS - Single pole, 

single throw, mercury to mercury contacts 

Features 

• Mercury activated control switch 

• Control differential of .5 inches above or 

below horizontal 

E = Electrical 

PC = Cable 

V = Voltage 

MWD = Maximum Water Depth 

MTS = Mercury Tilt Switch 

20 

AC-FT-2 

Includes 2 float clamps 

(Floats not included) 

AC-FT-3 



AC-FT-4 



AC-MFS 

Mercury Alarm Float 

Float Trees 

AC-FT-2/3/4 


Includes 2, 3, or 4 float clamps and mounting 

brackets. 40” standard height, can be ordered 

in any length. 

Features 

• Fully adjustable clamps for proper float 

height 

• Cord grips hold floats securely 

• Easily removable for float adjustment 


Wire Harness - 1 Year 

Alarm Switches - 3 Years 

Float Trees - 1 Year 


STEP Systems 

Accessories 

Effluent Discharge 

PDS-ED-1.5 

Turbine Discharge 

PDS-TD-1.25 

PDS-TD-2.0 


Effluent Discharge 

PDS-ED-1.5 

P - 1-1/2” SCH 40 

PDS-ED-2.0 

P - 2” SCH 40 

Features 

• Pump discharge assembly for effluent 

and sewage pumps 

Turbine Discharge 

PDS-TD-1.25 

P - 1-1/4” SCH 40 

PDS-TD-2.0 

P - 2” SCH 40 

PDS-TD-1.25-D 

P - 1-1/4” SCH 40 

PDS-TD-2.0-D 

P - 2” SCH 40 

Features 

• Pump discharge assembly for high head 

filtered effluent pumps 

Common Features 

• Includes all components to bring discharge 

from pump out of tank 

• True union ball valve 

• Includes flex tubing for easy installation 

P = Pipe 

PDS-ED-2.0 

PDS-TD-1.25-D 

PDS-TD-2.0-D 



Discharge Assemblies - 2 Year 


21



500’ per roll 

PDS-DT-24 

Non-Compensating Drip Tubing 

PDS-DT-24-PC 

Compensating Drip Tubing 

PDS-DT-24-PC-1.0 

Compensating Drip Tubing 

PDS-MS-1-AUT 

1” Automatic Management System 

PDS-CNTR 

Drip Control Panel 

PDS-SF-75 

3/4” Spin Filter, 7-28 gpm 

PDS-SF-100 

1” Spin Filter, 7-28 gpm 


Drip Tubing 

PDS-DT-24 

Non compensating tubing / 1.3 gph @ 20 psi 

PDS-DT-24-PC 

Pressure compensating tubing / .53 gph @ 7-60 psi 

PDS-DT-24-PC-1.0 

Pressure compensating tubing / 1 gph @ 7-60 psi 

Features 

• Flexible 1/2” polyethylene drip tubing for uniformly 

distributing secondary quality effluent 

• Drip tubing includes ROOTGUARD ® protection and 

Ultra-Fresh DM50 bactericide 

• Emitters spaced every 2’ along tubing 

Management Systems 

PDS-MS-1-AUT (Automatic) 

Requires a PDS-CNTR controller for operation 

PDS-MS-1-MAN (Manual) 

No controller required for operation 

Features 

• Utilized to provide backwashing of drip field and 

spin filter 

• Flow rates of 10 gpm - 28 gpm 

• Pressure loss between inlet and outlet: 

Flow (gpm) 10 15 20 25 28 

Psi loss 3.5 7.2 12 18.5 24 

Drip Control Center 

PDS-CNTR 

Includes: Programmable logic module for timing and 

controls • Contactor and circuit breaker for pump • H-O-A 

switches for pump and valve operation • Connections/ 

contacts for normally closed and normally opened 24 VAC 

valves • Elapsed time meter and cycle counter for pump 

monitoring • Circuit breaker for control power • Surge arrestor 

for lightening protection • 12” x 10” NEMA 4X fiberglass 

enclosure • UL Listed • Panel input is 115 VAC 

Features 

• Automated Management Controller to automatically 

flush the dripfield and spin filter through the 

use of electrically operated solenoid valves 

• Includes a digital programmable logic controller 

• Includes digital output of a variety or timing and 

monitoring features 

Spin Filter 

PDS-SF-75, PDS-SF-100, 

PDS-SF-75/100 

Features 

• 150 Mesh Spin Filter placed between the pump 

and dripfield to reduce and screen any remaining 

solids 

• Centrifugal motion and gravity move organic and 

inorganic particles out of the waste stream 

• Accumulated solids are flushed from the filter 

through the partially open filter flush valve 

PDS-MS-1-MAN 

1” Manual Management System 

22 


All product this page - 1 Year 





PDS-SF-RC-75/100 

Spin Filter Replacement Cartridge 

PDS-SV-100 

1” Solenoid Valve 

PDS-PR-75-LF 

3/4” 20 psi Low Flow 

Pressure Regulator 

PDS-PR-100-MF 

1” 20 psi Medium Flow 


PDS-PR-125-HF 

1-1/4” 20 psi High Flow 


PDS-VB-100 

1” Vacuum Breaker 


Spin Filter 

Replacement Cartridge 

PDS-SF-RC-75/100 

Features 

• 150 mesh screen 


PDS-PR-75-LF, PDS-PR-100-MF, 

PDS-PR-125-HF 

Performance: Outlet Pressure Flow Range 

PDS-PR-75-LF 20 psi 1/10 - 8 gpm 

PDS-PR-100-MF 20 psi 2 - 20 gpm 

PDS-PR-125-HF 20 psi 10 - 32 gpm 

Features 

• Preset to regulate pressure to the 

dripfield 

• Required when using non-pressure 

compensating tubing 

• Installed in-line on the supply manifold 

• 3/4”, 1” and 1 1/4” threaded inlets 

Vaccum Breaker and 

Air Vent Box 

PDS-VB-100, PDS-VB-AVB 

Features 

• 1’ vacuum breaker and air vent box are 

installed at the high points of the supply 

and return manifold 

• Required to prevent back siphoning of 

soil back into each drip emitter 

• Each vacuum breaker includes a 

Schrader Valve for pressure reading 

• Air vent box includes green removable 

lid 

Pressure Gauge 

PDS-PG-60 

Features 

• 1/4” NPT lower mount 

PDS-PG-60 

0-60 psi Pressure Gauge 

PDS-AVB 

7” Air Vent Box 





23



Notes 

Lockslip Fittings 

Compression Fittings 

PDS-CF-A 

1/2” Compression Adapter 

PDS-LF-A 

1/2” Lockslip Adapter 

PDS-CF-C 

1/2” Compression Coupling 

PDS-LF-C 

1/2” Lockslip Coupling 

PDS-CF-IC 

1/2” Internal Coupling 

PDS-LF-T 

1/2” Lockslip Tee 

PDS-CF-T 

1/2” Compression Tee 

24 

PDS-LF-E 

1/2” Lockslip Elbow 

PDS-CF-E 

1/2” Compression Elbow 






Pressure Filters 

PDS-PF-1.5/2.0 

NEW 


Pressure Filter 

PDS-PF-1.5/2.0 

Includes: Pressure filter body, Screen Filter 

Cartridge, Pressure gauge, Clear basin, Stainless 

steel safety tether, Drain Port, Two 1-1/2” 

x 2” SCH 40 slip/slip bushings, 120 gallons per 

minute maximum flow 

PDS-PF-1.5-AP - PDS-PF-2.0-AP 

Pressure Filter Assembly packages includessame 

as above but with all parts seen in 

graphic at left in either 1.5” or 2” versions 

Features 

• Protects drainfields from solids 

• Easy to install and service 

• Installs on the discharge side of any 

Zabel effluent pump 

• Dual stainless steel screens that prevent 

solids greater than 1/20” from 

passing to the drainfield 

• No special tools required to remove and 

is accessible from grade 

• Built-in pressure gauge for quick glance 

inspections 

• Independent third-party testing indicates 

a TSS reduction of 30-40% 

Pressure Drop (psi) 

1.5” Pressure Filter (PDS-PF-1.5) 

9 

8 

7 

6 

5 

4 

3 

2 

1 

0 

0 20 40 60 80 100 120 

Flow (gpm) 

PDS-PF-1.5-AP, PDS-PF-2.0-AP 

Pressure Drop (psi) 

2” Pressure Filter (PDS-PF-2.0) 

7 

6 

5 

4 

3 

2 

1 

0 

0 20 40 60 80 100 120 

Flow (gpm) 



Pressure Filters - 1 Year 


25


Distribution Valves 

4000 Series 

6000 Series 

PDS-DV-4-4-2 

4 Outlet w/2 Zone Cam 

PDS-DV-4-4-3 


PDS-DV-4-4-4 


PDS-DV-4-6-5 


PDS-DV-4-6-6 



4000 Series Valves 

PDS-DV-4-4-2, PDS-DV-4-4-3, 

PDS-DV-4-4-4, PDS-DV-4-6-2, 

PDS-DV-4-6-3, PDS-DV-4-6-4, 

PDS-DV-4-6-5, PDS-DV-4-6-6 

Inlet hubs: 1.25” 

Outlet hubs: 4 outlet = 1.5”, 6 outlets = 1” 

Features 

• Operates within a flow range of 10-25 

gpm 

• Rated at 25-75 psi 

Pressure loss through valve: 

4 outlet 

Flow (gpm) 10 20 30 40 

PSI Loss 2.0 3.0 4.5 6.4 

6 outlet 

Flow (gpm) 10 20 30 

PSI Loss 2.5 4.5 7.5 

PDS-DV-6-4-2, PDS-DV-6-4-3, 

PDS-DV-6-4-4, PDS-DV-6-6-5, 

PDS-DV-6-6-6 

Inlet and outlet hubs: 1.5” 

Features 

• Operates within a flow range of 15-150 

gpm 

• Rated at 25-150 psi 

Pressure Loss through valve: 

4 outlet 

Flow (gpm) 20 40 60 80 100 

PSI Loss 2.5 3.5 5.0 7.5 10.0 

6 outlet 

Flow (gpm) 20 40 60 80 100 

PSI Loss 3.0 4.0 6.0 9.0 11.0 

26 

PDS-DV-6-4-2 


PDS-DV-6-4-3 


PDS-DV-6-4-4 


PDS-DV-6-6-5 


PDS-DV-6-6-6 


Ready to install distribution valve 

packages may be ordered for any 

ZABEL distribution valve by simply 

adding “-AP” after the valve part 

number. Packages include a basin, 

lid, neoprene gasket, and security 

screws along with valve and all preassembled 

piping. 


4000 Series Assembly 

Packages 

PDS-DV-4-4-2-AP, PDS-DV-4-4- 

3-AP, PDS-DV-4-4-4-AP, PDS- 

DV-4-6-5-AP, PDS-DV-4-6-6-AP 



6000 Series Assembly 

Packages 

PDS-DV-6-4-2-AP, PDS-DV-6-4- 

3-AP, PDS-DV-6-4-4-AP, PDS- 

DV-6-6-5-AP, PDS-DV-6-6-6-AP 

Inlet and outlet hubs: 1.5” 

Features 

• Pre-plumbed package with valve, true 

union ball valve, clear pipe sections, 

quick disconnects, grommets and polyethylene 

basin with lid 


Distribution Valves - 2 Year 



Accessories 

Ball Valves 



Ball Valves 

PDS-DV-4-4-2, PDS-DV-4-4-3, 

PDS-DV-4-4-4, PDS-DV-4-6-2, 

PDS-DV-4-6-3, PDS-DV-4-6-4, 

PDS-DV-4-6-5, PDS-DV-4-6-6 



Features 

• Easy turn handles 

• Quick disconnect feature 

PDS-BV-1.25, PDS-BV-1.5, 

PDS-BV-2.0 

1-1/4”, 1-1/2” & 2” True Union 

Check Valves 

PDS-CV-B-1.25 

PDS-CV-B-1.5 

PDS-CV-B-2.0 

PDS-CV-P-1.0 

PDS-CV-P-1.25 

PDS-CV-P-1.5 

PDS-CV-P-2.0 

PDS-ZOS-075 

PDS-ZOS-100 

PDS-ZOS-125/150 

PDS-ZOS-200 

Sweep Assemblies 

PDS-SA-075 

PDS-SA-1.0 

PDS-SA-1.25 

PDS-SA-1.5 

PDS-SA-2.0 

Check Valves 

PDS-CV-B-1.25; PDS-CV-B-1.5; 

PDS-CV-B-2.0 

Available in 1-1/4”, 1-1/2” & 2” sizes 

Features 

• Brass valves are threaded 

PDS-CV-P-1.0; PDS-CV-P-1.25; 

PDS-CV-B-1.5; PDS-CV-B-2.0 

Available sizes 1, 1-1/4”, 1-1/2” & 2” sizes 

Features 

• Plastic valves are slip/slip 

Grommets 

PDS-GT-0.5, PDS-GT-1.0, PDS- 

GT-1.25, PDS-GT-1.5, PDS-GT- 

2.0, PDS-GT-3.0, PDS-GT-4.0- 

35, PDS-GT-4.0-40 

Available sizes 1/2”, 1, 1-1/4”, 1-1/2”, 2”, 3” 

& 4” 

Features 

• Hole saw size printed on back of each 

grommet 

• 4” grommet available in either SDR 35 

or SCH 40 


PDS-ZOS-075; PDS-ZOS-100; 

PDS-ZOS-125/150; PDS-ZOS- 

200 

Available sizes 3/4”, 1” , 1-1/4”/1-1/2” & 2” 

Features 

• Protects drainfield orifices from dirt, 

sand and gravel 

• Easily snaps on pipe 

• 1/8” wide slots 

Grommets 

PDS-GT-0.5 

PDS-GT-1.0 

PDS-GT-1.25 

PDS-GT-1.5 

PDS-GT-2.0 

PDS-GT-3.0 

PDS-GT-4.0-35 

PDS-GT-4.0-40 

Sweep Assemblies 

PDS-SA-075, PDS-SA-1.0, PDS- 

SA-1.25, PDS-SA-1.5, PDS-SA- 

2.0 

Available sizes 3/4”, 1” , 1-1/4”, 1-1/2” & 2” 

Features 

• Provided clean out access to pressure 

distribution lines 

Hole Saw Chart 

Grommet Size 1/2” 1” 1-1/4” 1-1/2” 2” 3” 4” 

Hole Saw Size 1-5/16th 1-3/4” 3” 3” 3” 4” 5” 



Distribution Valves - 2 Year 


27

Risers & Lids 

Intro Page 

1 

2 

Tanks & Basins 

1 Fiberglass Tanks page 35 

2 Polyethylene Basins page 37 

ZABEL ® Risers & Lids provide easy access to septic 

tanks, dosing tanks and basin systems. Two installation 

options available, cast into or retrofit to existing 

concrete tanks. A poly tank adapter makes it 

possible to install onto AK industries plastic tanks. 

Patented interlocking design and neoprene gaskets 

reduce the possibility of water intrusion. UV protection 

prevents deterioration of material by exposure 

to sunlight. Tamper resistant fasteners reduce 

the possibility of unauthorized entry. Available in 

many sizes. Wheel load tested to withstand up to 

2,500 lbs. 

1 Heavy Duty 20”, 22” & 26” page 28 

2 Economy 12”, 20” & 24” page 32 

3 Decorative Stone page 33 

Cast into new tank 

ZABEL ® Tanks & Basins are designed to provide storage options for 

today’s water and wastewater systems. Polyethylene basins with capacities 

up to 87 gallons offer options for small pump stations and retrofit capabilities 

for filters and other wastewater appurtenances. The basins may also 

be fitted with risers to achieve a custom depth. Fiberglass tanks, featuring 

a patented anti-floatation design along with a 6 inch molded riser to prevent 

surface water infiltration, offer watertight options for capacities up to 

650 gallons. 

1 

Retrofit to existing tank 

3 

2 

Intro Page 


Risers & Lids 

Heavy Duty 20” 

RB-L-20 

RB-R-20x6 

RB-R-20x12 


RB-L-20 

20” Lid 

RB-R-20x6 

20” x 6” Riser 

RB-R-20x12 

20” x 12” Riser 

RB-R-20x38 

20” x 38” Riser 

RB-RTA-20x2 

20” x 2” Retrofit Tank Adapter 

Features 

• Tested to withstand up to a 2500 lb 

wheel load 

• Neoprene gaskets with lid must be 

installed as per instructions 



instructions 

• Ribs accommodate up to a 2” grommet, 

flat spots in 38” basin accommodate up 

to a 4” grommet 



exceeding a maximum depth of 48”. 

RB-R-20x38 

RB-RTA-20x2 



Access System parts - 2 Year 


28

Risers & Lids 


RB-L-22 

RB-R-22x6 

RB-R-22x12 


RB-L-22 

22” Lid 

RB-R-22x6 


RB-R-22x12 

22” x 12” Riser 

RB-R-22x38 

22” x 38” Riser 

RB-RTA-22x2 


Features 


wheel load 





instructions 







RB-R-22x38 

RB-RTA-22x2 

29 





Risers & Lids 


Roto-Molded 

Components 

RB-L-26 

26” Lid 

RB-R-26x18 

26” x 18” Riser 


RB-L-26 

26” Lid 

RB-R-26x6 


RB-R-26x12 

26” x 12” Riser 

RB-RTA-26x2 


Features 


wheel load 





instructions 







RB-R-26x12 

26” x 12” Riser 

RB-CTA-26x12 

26” x 12” Cast In Tank 

Adapter 

RB-RTA-26x2 






30

Risers & Lids 


RB-R-26x38 

Roto-Molded 

Components 


RB-R-26x6 


RB-R-26x38 

26” x 38” Riser 

RB-CTA-26x6 

26” x 6” Cast-in Tank Adapter 

RB-PTA-26x2 

26” x 2” Poly Tank Adapter 

Features 


wheel load 





instructions 







RB-CTA-26x6 

RB-R-26x6 

RB-PTA-26x2 

31 





Risers & Lids 

Economy 12”, 20”, & 24” 

AS-L-12 

AS-R-12x6 

AS-L-20 

AS-R-20x6 

AS-L-24 

AS-R-24x6 

AS-R-AR 

20” & 24” Adapter Ring 

Injection Molded 

Components 


12” Components 

AS-L-12 

12” Lid 

AS-R-12x6 



AS-L-20 

20” Lid 

AS-R-20x6 


AS-R-RP 

20” Riser Pan 

AS-R-AR 

20/24” Adapter Ring 


AS-L-24 

24” Lid 

AS-R-24x6 


AS-R-AR 

20/24” Adapter Ring 

Features 

• Tamper resistant fasteners included with 

each lid 


wheel load 

• Neoprene gaskets must be installed as 

per instructions 



instructions 



exceeding a maximum depth of 48” 

• Available in three colors 

Field Stone (brown) 

Riverbed (gray) 

Baja Cresta (red) 

AS-R-RP 

20” Riser Pan 





32

Risers & Lids 

Decorative Stone Covers 

RB-DS-101 

L=36”, W=26”, H=21” 

RB-DS-102 

L=27”, W=21”, H=25” 

RB-DS-103 

L=56”, W=42”, H=30” 

RB-DS-106 

L=19”, W=14”, H=12” 

RB-DS-107 

L=27”, W=15”, H=7” 

RB-DS-108 

L=36”, W=22”, H=4” 


RB-DS-101 

The 101 rock with its classic shape and generous 

dimenstions is perfect for many applications. 

RB-DS-102 

Tall and rugged, the bold looking 102 rock 

handles jobs where height is a concern. With 

plenty of space top to bottom, this rock is the 

ultimate enclosure. 

RB-DS-103 

To conceal large unsightly objects, call on the 

mountainous 103 rock. This expansive and 

majestic rock has plenty of size for big projects. 

RB-DS-105 

This versatile and attractive rock has a flat face 

to accommodate address plaques and lettering. 

Smaller in size, the 105 is an excellent enclosure 

for more small scale items. Works well as a 

garden accent. 

RB-DS-106 

The squared shape of this little rock provides 

maximum coverage in minimal space. The 106 

rock with its chiseled features is the perfect 

complement to other rocks. Lettering or speakers 

may be affixed to this rock’s flat side. 

RB-DS-107 

With its uniquely textured surface, the 107 rock 

makes an interesting addition to any rock garden. 

Designed to conceal low profile rectangular 

items. 

RB-DS-108 

A flat rock with lots of character, the 108 will 

naturally disguise any low profile water garden 

or irrigation device. This rock is beautiful in any 

application. 

RB-DS-112 

This soft-featured rock covers large diameter, low 

profile items. Its subtle shape blends nicely into 

the landscape. Flowers love the 112 rock. 

Features 

• All rocks include stacks for securing to 

ground 

• Available in three different colors 

33 

RB-DS-105 

L=24”, W=12”, H=12.5” 

RB-DS-112 

L=36”, W=36”, H=9” 



Decorative Stones - 1 Year 


Risers & Lids 

Decorative Stone Covers 

RB-DS-IP-602 

Insulated Pouch 24” x 12” 

Accessories 

RB-DS-AP 

Address Plaque 

RB-DS-IP-603 

Insulated Pouch 48” x 24” 


RB-DS-AP 

Available in all rock colors with black characters 

and border, or black background with 

gold characters and border. Weather resistant 

polyethylene 

RB-DS-IP-602 

24”T x 24”W compatible with model 101 and 

102 replicated rock enclosures. R-13 insulation 

encapsulated within a poly-pouch. 

RB-DS-IP-603 

24”T x 48”W compatible with model 103 replicated 

rock enclosures. R-13 Insulation encapsulated 

within a poly-pouch. 

RB-DS-AV-711 

3” diameter for septic and well devices. 4” 

diameter for backflow devices. Vents are painted 

to match each color and can be mounted into the 

side wall of the rock enclosures. 

RB-DS-AV-712 

The squared shape of this little rock provides 

maximum coverage in minimal space. The 106 

rock with its chiseled features is the perfect 

compliment to other rocks. Lettering or speakers 

may be affixed to this rock’s flat side. 

RB-DS-DS-GH 

751-HTP Guardian W51 Pre-assembled electric 

heating cable six feet in length. Intended for 

installation on metal or plastic water pipes for 

freeze protection in residential and commercial 

locations. Gardian W51 heating cables come 

complete with a 30-inch power cord and plug. 

RB-DS-AV-711 

3” Round Air Vent 

RB-DS-AV-712 

4” Round Air Vent 

RB-DS-GH 

Guardian Heat System 



Decorative Stones - 1 Year 


34


Fiberglass Tanks 

TS-FPT-3-125 

TS-FPT-4-250 


TS-FPT-3-125 

125 gpd fiberglass pump tank 

TS-FPT-4-250 


TS-FPT-6-400 


TS-FPT-8-650 


Features 

• Popular uses are pump tanks, retrofit 

filter installation when septic tank isn’t 

accessible, holding tanks and other 

uses where water resistant tanks are 

required 

• Fiberglass lid with neoprene gasket and 

security screws included 

• Indented flat spots on bottom for easy 

grommet and outlet pipe installation. 

Part # Changes 

OLD PART 

TS-FPT-125 

TS-FPT-250 

TS-FPT-400 

TS-FPT-650 

NEW PART 

TS-FPT-3-125 

TS-FPT-4-250 

TS-FPT-6-400 

TS-FPT-8-650 

TS-FPT-6-400 

35 

TS-FPT-8-650 



Fiberglass Tanks - 2 Year 




20” Roto-Molded 

Components 

RB-B-20x12 


Components 

RB-B-22x12 


20” Basins 

RB-B-20x12 

20” x 12” Basin 

RB-B-20x38 

20” x 38” Basin 

22” Basins 

RB-B-22x12 

22” x 12” Basin 

RB-B-22x38 

22” x 38” Basin 

Features 


wheel load 





instructions 







RB-B-20x38 

RB-B-22x38 

All Zabel Basins will accept up to a 4” 

pipe and grommet using the available 

inlet and outlet flat spots. 

Note: The outlet side flat spots are 1” lower than 

the corresponding Inlets on the other side of the 

basins. 



Polyethylene Basins - 2 Year 


36



RB-B-26x12 


Components 


RB-B-26x12 

26” x 12” Basin 

RB-B-26x18 

26” x 18” Basin 

RB-B-26x38 

26” x 38” Basin 

RB-B-26x12 

26” x 12” Basin 

Features 


wheel load 





instructions 







RB-B-26x38 

RB-B-26x18 

All basins are available as packages 

by simply replacing the B with 

“BAS”. All basin packages include 

a basin, lid, neoprene gasket, your 

choice of two grommets and security 

screws. 

RB-BAS-20x38-FP 



37 



Polyethylene Basins - 2 Year 


Advanced Treatment 

Intro Page 

1 

Certified to 

NSF/ANSI 

Standard 40 

ZABEL ® ATS (Advanced Treatment Systems) provide 

options and choices in matching the appropriate 

technology with the individual application. 

Our patented delivery system, Single Container 

Advanced Treatment (SCAT ® ) is now available with 

two different fixed film medias. 

The SCAT ® AeroCell ® utilizes a patented synthetic 

open cell foam media for treatment. The media’s 

high porosity, large surface area, and ease of microbial 

attachment allows for loading rates of up 

to ten times that of other fixed film systems. The 

open cell foam media has a 15-year track record 

for effectively treating wastewater to the highest of 

standards. 

Certified to 

NSF/ANSI 

Standard 40 

2 

The SCAT Bio-COIR TM wastewater treatment system 

utilizes a patent-pending coir media for treatment. 

Coir is a generic name for the fibers that constitute 

the thick mesocarp, or husk, of the coconut fruit. 

The high lignin content of these fibers results in a 

more durable material that is slow to degrade and 

assures that excellent water/air ratio is maintained 

over a long period of time. This renewable resource 

has been proven to effectively treat wastewater 

to secondary levels. Both AeroCell and Bio-COIR 

systems meet all NSF International Standard 40 

Class 1 requirements. 

Residential 

Commercial 

Community 

1 SCAT AeroCell page 38 

2 SCAT Bio-COIR page 39 

3 Gravity Recirculation Devices page 40 

4 Pressure Recirculation Device page 41 

5 Flow Saddle page 42 

6 Chlorinator page 42 

7 Carbon Filters page 42 

8 Air Compressors page 43 

9 Pressure Gauge page 43 

10 UV Disinfection Unit page 43 

Finally...Another 

Choice! In Decentralized 

Wastewater Systems 



SCAT ® AeroCell ® 

ATS-SCAT-3-AC-200 

3’ AeroCell unit 





200 gallon per day • 16 ft 3 of open cell foam 

cubes • 12.5 gpd/ft 3 hydraulic loading rate • One 

120 o spray nozzle 



cubes • 12.5 gpd/ft 3 hydraulic loading rate • Two 

120 o spray nozzles 



cubes • 12.2 gpd/ft 3 hydraulic loading rate • Two 




cubes • 12.3 gpd/ft 3 hydraulic loading rate • Four 


Features 

• Effluent discharge and carbon filter vent 

assemblies included 





• Open cell foam contains 82% void space 

• .015 - .016 lbs/ft 3 /day organic loading 

rate 

38 



SCAT Part # Changes 

OLD PART 

ATS-SCAT-AC-200 




NEW PART 





AeroCell System part #’s 

1000 gpd 

AeroCell foam media 

8’ unit 

Self Contained Advanced Treatment 

Advanced Treatment System 


ATS-SCAT-8-AC-C500 


ATS - SCAT - 8 - AC - 1000 

Highest 

Quality 

Treatment 

Levels 

Contact Zabel for 

NSF Certification 

Information 


Certified to 

NSF/ANSI 

Standard 40 

NSF Certified Systems 



cubes • 5.88 gpd/ft 3 hydraulic loading rate • Four 




cubes • 5.43 gpd/ft 3 hydraulic loading rate • Eight 




cubes • 5.88 gpd/ft 3 hydraulic loading rate • Eight 




cubes • 5.61 gpd/ft 3 hydraulic loading rate • 

Twelve 120 o spray nozzles 



cubes • 5.88 gpd/ft 3 hydraulic loading rate • 

Twelve 120 o spray nozzles 


Fiberglass Module - 2 Year 

Effluent Discharge and Vent 

Assembly - 2 Year 

Open Cell Foam - 10 Year 



ATS-SCAT-3-BC-200 

3’ Bio-COIR unit 




Bio-COIR Single units 


200 gallon per day • 16 ft 3 of patent pending 

organic Bio-COIR media • 12.5 gpd/ft 3 hydraulic 

loading rate • One 120 o spray nozzle 




loading rate • Two 120 o spray nozzles 




loading rate • Two 120 o spray nozzles 




loading rate • Four 120 o spray nozzles 

Features 

• Effluent discharge and carbon filter vent 

assemblies included 





• .015 - .016 lbs/ft 3 /day organic loading 

rate 

SCAT ® Bio-Coir TM 39 



NEW 

Bio-COIR System part #’s 

NSF Certifed 1250 gpd 

Bio-Coir media 

Two 8’ & one 6’ units 

Self Contained Advanced Treatment 

Advanced Treatment System 

Contact Zabel for 

NSF Certification 

Information 


ATS-SCAT-8-BC-C500 

8’ Bio-COIR units 

Secondary 

Treatment 

Levels 

ATS - SCAT - 886 - BC - C1250 


Certified to 

NSF/ANSI 

Standard 40 

NSF Certified Systems 




loading rate • Four 120 o spray nozzles 




loading rate • Eight 120 o spray nozzles 




loading rate • Eight 120 o spray nozzles 




loading rate • Twelve 120 o spray nozzles 




loading rate • Twelve 120 o spray nozzles 


Fiberglass Module - 2 Year 

Effluent Discharge and Vent 

Assembly - 2 Year 



Accessories 

ATS-GRD-4/1 

4/1 Split 

Gravity 

Recirculation Devices 


ATS-GRD-4/1 

80% recirculation • Remote mount • All piping 

SCH 40 PVC • Inlet line = 1.25” • 20% discharge 

line = 1.25” • 80% recirculation line = 2” 

ATS-GRD-50/50 

50% recirculation • Tank top mount • 1.25” SCH 

40 PVC pipe 

ATS-GRD-80/20 


40 PVC pipe 

ATS-GRD-100/50/50 


40 PVC pipe 

ATS-GRD-100/50/50-N 

50% recirculation • Nitrogen reduction tank top 

mount • 1.25” SCH 40 PVC pipe 

Features 



• During times of no flow on the float type 

devices the valve changes recirculation 

rate to 100%. 

• Nitrogen reducing models can be routed 

to primary tank for nitrogen reduction 

ATS-GRD-100/50/50 

100/50/50 Split 

ATS-GRD-50/50 

50/50 Split 

40 

ATS-GRD-80/20 

80/20 Split 

ATS-GRD-100/50/50-N 

100/50/50 Split 

Nitrogen 



Recirculation Devices - 2 Year 



Accessories 

ATS-GRD-100/80/20 

100/80/20 Split 

Pressure 

Recirculation Device 

ATS-PRD-4/1 

4/1 Split Pressure Recirculation 

Device 


Gravity Recirc Devices 

ATS-GRD-100/80/20 


40 PVC pipe • Ideal for use on vacation homes 

ATS-GRD-100/80/20-N 

80% recirculation • Nitrogen reduction tank top 

mount • 1.25” SCH 40 PVC pipe 

Features 



• During times of no flow on the float type 

devices the valve changes recirculation 

rate to 100%. 

• Nitrogen reducing models can be routed 

to primary tank for nitrogen reduction 

Pressure Recirc Devices 

ATS-PRD-4/1 

80% recirculation • Inline mount • 1.25” and 4” 

SCH 40 PVC pipe 

Features 

• Utilized in dual pump pressurize systems 

• Pre-cut and pre-drilled kit 

ATS-GRD-100/80/20-N 

100/80/20 Split 



Recirculation Devices - 2 Year 


41


Accessories 

Flow Saddle 

ATS-GRD-SAD 

Chlorinator 

ATS-CF-1.25 

ATS-CF-3.0 

Carbon 

Filters 

ATS-CF-2.0 


Flow Saddle 

ATS-GRD-SAD 

Attaches to a 4” SCH 40 pipe • 2” Inlet pipe 

Features 

• Two piece design 

• Quick and simple way to splice into a 

inlet/outlet line without cutting and gluing 

in a tee. 

Chlorinator 

ATS-CL 

Attaches to a 4” pipe 

Features 

• 4” stand pipe to grade for inspection and 

for adding chlorine disk 

• Housing accepts 2-5/8” x 13/16” chlorine 

disk tablets 

Carbon Filters 

ATS-CF-1.25 

Attaches to a 1.25” SCH 40 PVC pipe 

ATS-CF-2.0 

Attaches to a 2” SCH 40 PVC pipe 

ATS-CF-3.0 

Attaches to a 3” SCH 40 PVC pipe 

ATS-CF-4.0 

Attaches to a 4” SDR 35 PVC pipe 

Features 

• For use with advanced treatment system 

or roof top applications 

• Reduces noxious odors 

• Unique patented carbon cloth is easy to 

use and leaves no residue 

• Zabel recommends replacing charcoal 

cloth disk annually 

ATS-CF-4.0 

42 

ATS-CL 

ATS-CF-RC-2.0 

Replacement Disk for 1.25” & 2.0” 

Carbon Filter 

ATS-CF-RC-4.0 

Replacement Disk for 3” & 4” Carbon Filter 



Flow Saddle - 1 Year 

Chlorinator - 1 Year 

Carbon Filter Housing - 2 Year 

Carbon Filter Disk - 1 Year 



Accessories 


Compressors 

ATS-AC-T5040A 

ATS-AC-T5040A 

Thomas Linear Compressor 

ATS-AC-T5060A 


PDS-PG-30 

0-30 psi Pressure Gauge 

NEW 

ATS-GUV-3 

Ultra Violet 

Disinfection Unit 

PSI CFM LPM AMPS WATTS 

0 

1 

2 

3 

4 

5 

6 

7 

2.3 

1.96 

1.58 

1.12 

0.6 

0.1 

65.1 

50.7 

33 

12 

ATS-AC-T5060A 

1 

0.9 

0.9 

0.8 

0.8 

0.8 

44 

43 

38 

32 

24 

15 


0 

1 

2 

3 

4 

5 

6 

7 

3.2 

2.8 

2.38 

1.88 

1.4 

0.84 

0.31 

90.6 

73.9 

54.6 

34.1 

11.8 

ATS-AC-T5078A 

1.5 

1.4 

1.4 

1.3 

1.2 

1.2 

1.1 

69 

67 

63 

57 

49 

40 

29 


0 

1 

2 

3 

4 

5 

6 

7 

3.6 

3.45 

3.2 

2.75 

2.1 

1.35 

0.5 

101.9 

94 

79.3 

52.1 

2.8 

2.3 

2.3 

2.1 

2 

1.9 

1.8 

1.7 

85 

90 

92 

85 

75 

62 

43 

Features 

• 115 volts, 60 Hertz, single phase 

• Thomas oil-less linear air compressors 

for new or repair installations 

• Quiet efficient operation with few moving 

parts 

• Low power consumption 

• Easily adjusts air flow performance to 

exact requirements 

Pressure Gauge 

Features 

• 1/4” NPT lower mount 

UV-Disinfection Unit 

Features 

• Maximum flow through the unit is rated 

at 3-6 gpm with the following effluent 

conditions: Suspended Solids-less than 

30 mg/liter BOD (5 day) - less than 

30mg/liter 

ATS-AC-T5078A 




Compressors - 1 Year 

Pressure Gauge - 1 Year 

UV Disinfection unit - 1 Year 


43

Tools 

Intro Page 

1 

ZABEL ® Tools Zabel Tools include an assortment of 

products designed to make life easier for the onsite 

system installer, designer and service provider. 

These high quality products include tools for construction 

assistance, site evaluation, safety, convenience 

and maintenance. These tools are covered 

with a one year warranty. You will not get that from 

other suppliers of similar products. 

9 

7 

8 

2 

1 Shovels page 44 

2 Septic Speed Stick page 44 

3 Clinometer page 45 

4 Soil Auger page 45 

5 Tile Probe page 45 

6 Chipping Hammer page 45 

7 Imhoff Cone page 46 

8 Sludge Judge page 46 

9 Tape page 46 

10 Hose Rings page 46 

11 Soil Chart page 46 

12 Hose Hook page 47 

13 Tool Boxes page 47 

14 Service Kits page 48 

15 Safety Equipment page 48 

11 

12 

13 

14 

15 


Onsite Tools 

Notes 

OST-I-UTS 

Union Tools Shovel 

OST-I-SSS 

Septic Speed Stick 

OST-I-RZS 

Razor Back Shovel 

OST-I-UTDS 

Union Tools Drain Spade 

OST-I-LTS 

Little Hog Shovel 

OST-I-RZSC 

Razor Back Scraper Chopper 



All tools - 1 Year 


44

Onsite Tools 

Notes 

OST-D-TP 

48” Steel Tile Probe 

OST-I-TS 

Torx Security Screwdriver 

OST-D-ITP 

42” Insulated Steel Tile Probe 

OST-D-C 

Clinometer 

OST-D-JH 

Tile Probe Jack Hammer 

OST-D-AUG 

Soil Auger w/Extension Handle 

& T-Handle 

45 

OST-D-CH 

Steel Chipping Hammer 





Onsite Tools 

Notes 

OST-D-IC 

Imhoff Cone 

OST-M-SJ 

Sludge Judge 

OST-M-HR-A4 

4” Aluminum Hose Ring 

OST-D-T 

100’ Tape 

OST-M-HR-P4 

4” Polyurethane Hose Ring 

OST-D-MSC 

Munsell Soil Color Chart 

OST-M-HR-A3 

3” Aluminum Hose Ring 





46

Onsite Tools 

Notes 

OST-M-HR-P3 

3” Polyurethane Hose Ring 

OST-T-TT-(W/B) 

Tool Tainer White/Black 

OST-M-HH-11 

3” Hose Hook - 11” length 

OST-T-TT-L-(W/B) 

Tool Tainer Long White/Black 

47 

OST-M-HH-18 

3” Hose Hook - 18” length 

OST-T-FT-(W/B) 

Fender Tainer White/Black 





Onsite Tools 

Notes 

OST-SK-S 

Small Service Kit 

OST-SE-CG 

PVC Coated Safety Gloves - Large 

OST-SK-M 

Medium Service Kit 

OST-SE-NG 

Flock Lined 16 mil 

Nitrile Gloves - Large 

OST-SK-L 

Large Service Kit 

OST-SE-BC-10 

12” Boot Covers Size 10 and Below 

OST-SE-BC-11 

12” Boot Covers Size 11 and Above 

OST-SE-SG 

Safety Glasses 

OST-SE-EP 

Ear Plugs 

OST-SE-FK 

First Aid Kit 





48

ZABEL Products Index 

PRODUCTS 

Page 

Effluent Filters 4-7 

4” 


4 

4 

8” 5 

12” 6 

Accessories 7 

Gravity Distribution 8-10 

Versa-Tee Baffles 

Flow Divider/Director 

8 

8 


D-Box Seals 

9 

10 

Dosing Siphons 10 

STEP Systems 11-21 

Pumps 11 

Filtered Pump Vaults 12-13 

Alarms & Controls 14-15 

Pump Packages 16-18 

Accessories 19-21 

Pressure Distribution 22-27 

Drip Irrigation 22-24 

Pressure Filter 25 

Distribution Valves & Packages 26 

Accessories 27 

Risers & Lids 28-34 

Heavy Duty 28-31 

Economy 32 

Decorative Stone Covers 33-34 

Tanks & Basins 35-37 

Fiberglass Tanks 35 

Polyethylene Basins & Packages 36-37 

Advanced Treatment 38-43 

SCAT ® BioFilter ® 38 

SCAT BioCOIR TM 39 

Accessories 40-43 

Onsite Tools 44-48 

49 


Purchase Terms, Conditions & Warranty info 

The following purchase terms, conditions & warranties apply to all sales of products by Zabel. Your purchase of Zabel products is confirmation of your 

acceptance. Purchase terms, conditions and warranties may be changed without notice. 

Payment Terms: 

1% 10 days; Net 30 days. No discounts on COD, MC or Visa. There will be a $25.00 fee for returned checks. 

Product Returns: 

No returns without prior approval. Product may be returned within 30 days of purchase order date for full refund if returned in unopened box. A 20% 

restocking fee will be charged if boxes opened & resealed or return is made after 30 but within 90 days of purchase. Returns after 90 days will be on a case 

by case basis. Special order items are nonreturnable. All freight will be charged to the customer’s account. 

Freight: 

F.O.B. our warehouse. Additional charges may be incurred for multiple drop shipments. Freight carriers for free freight offers will be at the discretion 

of Zabel. Customers requesting specific carriers or delivery types will be responsible for any additional freight costs. Customer responsible for haulers fuel 

surcharge. 

Past Due Accounts: 

1.5% late fee charged each month or portion thereof for the unpaid balance. Timely payments are very important and this late fee will be charged to all 

accounts that are paid late. 

Damaged Shipments: 

Freight claims for damaged or missing shipments are the responsibility of the customer. Shipping claims are to be filed by the customer with the delivering 

carrier and any losses incurred are at the customer’s expense. If you receive a shipment in damaged condition you should retain all packing material 

for carrier’s examination, immediately advise the carrier by phone and in writing, and advise our office immediately so we may assist you with your claim. 

State Sales Tax: 

All purchases made within the state of Kentucky and Florida will be charged the appropriate rate of Kentucky and Florida sales tax. Sales or use tax of 

out of state orders are the responsibility of the customer and such purchases will be reported to the respective state when requested. 

Warranty: 

ALL PRODUCTS ARE WARRANTED AGAINST DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF ONE YEAR FROM 

THE DATE OF THE PURCHASE UNLESS LONGER PERIODS ARE SPECIFICALLY STATED ON PRODUCT INFORMATION SHEETS. 

IN NO EVENT SHALL ZABEL BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES OR ANY LABOR, MATERIAL, FREIGHT OR EX- 

PENSE REQUIRED TO REPLACE, CORRECT, OR REINSTALL THE PRODUCT. ZABEL’S LIABILITY IS LIMITED TO REPAIR OR 

REPLACEMENT OF THE PART. ALL WARRANTIES ARE VOID IF THE PRODUCT HAS BEEN IMPROPERLY MODIFIED, APPLIED 

OR INSTALLED, SUBJECTED TO MISUSE OR ABUSE. EXCEPT AS STATED HEREIN, THERE ARE NO WARRANTIES EXPRESS OR 

IMPLIED, INCLUDING THE WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A SPECIFIC PURPOSE. 

Normal office hours are 7:30 a.m. to 5 p.m. EST Monday thru Friday 

Send orders via: 

Phone 1-800-221-5742 

Fax 1-502-992-8201 

Internet www.zabelzone.com 

24 hours a day. 

Orders received before 11:00 a.m. EST ship same day.

Gravity Distribution - Zabel

Create successful ePaper yourself

Delete template?

Save as template?