PRIMERGY TX150 S6

PRIMERGY TX150 S6 

System configurator and order-information guide 

May 2008 

Contents 

Instructions 

Configuration diagram 

Configurator 

Software Configurator IA32 and EM64T 

I Basic unit 

II Processor 

III Memory 

IV Graphics 

V Accessible drives 

VI Hard disk drives 

VII SAS / SCSI Controller 

VIII Disk array 

IX Fibre Channel 

X Communication/Network 

XI System management options 

XII Miscellaneous 

XIII Country specific power cords 

Change report 

PRIMERGY Server


PRIMERGY TX150 S6 Status 2008-04-14 

Instructions 

This document contains basic product and configuration information that will enable you to configure your system via 

PC-/ System-Architect. 

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete 

PRIMERGY Rack system. 

You can configure your individual PRIMERGY server in order to adjust your specific requirements. 

The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect 

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through 

the configurator by following the lines from the top to the bottom. 

Section III Memory, example 

There are X memory slots which can be equipped with XXX MB. 

It is permissible to make up to X passes through the memory upgrade options. 

X times 

S26361-XXX-XXX 

Memory XXX MB 

S26361-XXX-XXX 

Memory XXX MB 

max. X times per system 

max. X times per system 

In one chapter you can only select as many components (here 4x) as the arrow indicates. 

4x 

Please note that there are information symbols which indicate necessary information. 

Further information in the internet see: 

http://www.primergy.com 

http://extranet.fujitsu-siemens.com/primergy 

(internet) 

(extranet) 

Prices and availability see price list and PC-/ System-Architect 

Subject to change and errors excepted 

Fujitsu Siemens Computers 

Enterprise Products - PRIMERGY Server 2 of 20



Configuration diagram PRIMERGY TX150 S6 SATA LFF (3.5") System Unit 

System unit ( I ) 

SIDE VIEW 

FRONT VIEW 

Standard Power Supply 

3 x HH 5.25" + FDD free or 

2 x HH 5,25" + FDD free + Option A 

or 

PS (I) 

5.25" Slim Line 

1. PSU 2. PSU CSS Option 

Redundant power supply option 

5.25" x 1.6" 

1.) 1.) 1.) 2.) 3.) 4.) System Fan 

4 PCI-Busses 

Modul 1 

Xeon UP 5.25" x 1.6" 

Modul 3 

Modul 2 

Accessible drives ( V ) 

Modul 4 

Processor ( II ) optional CSS: (Option A) 

Memory ( III ) 

- support for SL (0.5") DVD Drive + local View LED Display (CSS) 

- occupies one 5.25" bay 

Extension slots 

one DVD (slim line or standard) is mandatory 

SCSI Controller ( VII ) 

Disk Array ( VIII ) 

Communication/Network ( IX ) Hard disk drives ( VI ) 

Miscellaneous ( X ) 

Slot 6 ( 3,3V ): PCIe x8, short 



Bank 1 

Bank 2 

Slot 3 ( 5V ): PCI 32-Bit / 33MHz, short 

Slot 2 ( 5V ): PCI 32-Bit / 33MHz, long 


4x 3,5" HDD Frame 

3.5"x1" FD Drive 

3.5"x1" SATA 

3.5"x1" SATA 

3.5"x1" SATA 

3.5"x1" SATA 

Key: 

Included in basic unit 

Option 

Fujitsu Siemens Computers Enterprise Products PRIMERGY Server 3 of 20



Configuration diagram PRIMERGY TX150 S6 SAS LFF (3.5") System Unit 


SIDE VIEW 

FRONT VIEW 

1.) 1.) 1.) 2.) 3.) 4.) System Fan 

4 PCI-Busses 



2 x HH 5,25" + FDD free + Option A or 

1 x HH 5.25" + FDD free + Option C 

or 

PS (I) 


CSS Option 

1. PSU 2. PSU CSS Option 5.25" Slim Line 


3.5"x1" SAS 

5.25" x 1.6" 

Modul 1 

Xeon UP 5.25" x 1.6" 5.25" x 1.6" 

Modul 3 

Modul 2 


optional CSS: (Option A) 

Modul 4 


Processor ( II ) 


Memory ( III ) optional SAS LFF HDD extension Box: (Option C) 

- support for 

+ 2x 3.5" SAS HDD hot plug 

Extension slots + SL (0.5") DVD Drive 

+ CSS Option 


- occupies two 5.25" bays 


Communication/Network ( IX ) 






Bank 1 

Bank 2 




Hard disk drives ( VI ) 

4x 3,5" HDD Frame 


3.5"x1" SAS 

3.5"x1" SAS 

3.5"x1" SAS 

3.5"x1" SAS 

3.5"x1" SAS 

Key: 


Option 




Configuration diagram PRIMERGY TX150 S6 SAS SFF (2.5") System Unit 


SIDE VIEW 

FRONT VIEW 



2 x HH 5,25" + FDD free + Option A 

or 

PS (I) 


1. PSU 2. PSU CSS Option 


5.25" x 1.6" 

1.) 1.) 2.) 3.) 4.) System Fan 

4 PCI-Busses 

Modul 1 

Xeon UP 5.25" x 1.6" 

Processor ( II ) 

Modul 3 

Modul 2 

Modul 4 optional CSS: (Option A) 

Memory ( III ) 




Extension slots 




Communication/Network ( IX ) Hard disk drives ( VI ) 





Bank 1 

Bank 2 




8x SFF HDD Frame 

2.5" (SFF) SAS 








1.) 


Key: 


Option 



Start PRIMERGY TX150 S6 PRIMERGY TX150 S6 Status 2008-04-14 

SW Configurator IA32 

with OEM-Software 

for PRIMERGY Server 

without OEM-Software 


OEM-SW is bound to HW and 

is not allowed to be ordered 

separately. 

For all SW products please refer to the corresponding software configurator accessible via 

the Extranet under Configuration & Tools, -All configurations, -Software, URL see below. 

Microsoft - Software: **) PRIMECLUSTER *) 

- Small Business Server 2003 - Clustering 

- Windows Server 2003 R2, - Load Balancing 

Standard Edition 

Enterprise Edition 

! Web Edition, SP2/English 

- Additional loose Linux - Software: **) 

Client-Access-Licenses (CALs) - Open Enterprise Server ***) 

(not for Web Edition) 

- SuSE Linux ES (OEM): LO 

- SuSE Linux ES (Support): LS 

- Red Hat EL (OEM): LO 

- Red Hat EL (Support): LS 

Manageability Software: V**) 

Details eg. version numbers are published 

- iRMC2 advanced Pack in the separate SW-Configurator 

- RemoteDeploy 

'- Altiris Server Deployment 

*) Pay attention to the PRIMECLUSTER release and ordering information in the Extranet under 

http://extranet.fujitsu-siemens.com/primecluster 

Backup-Software / 

Application-Software: U 

**) Pay attention to release and order information in PRINCE -> Operating System 

- ARCserve http://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm 

- openSM2 

***) Supply over distribution or procurement from FSC VP BC Software 

They find single software configurators and release lists (OS-matrix / system management / security) under following addresses: 

for internal users: 

for partners: 

http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htm 

http://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htm 

Continue with PRIMERGY 

HW configurator 





SW Configurator EM64T 

with OEM-Software 


without OEM-Software 


OEM-SW is bound to HW and 

is not allowed to be ordered 

separately. 

For all SW products please refer to the corresponding software configurator accessible via 

the Extranet under Configuration & Tools, -All configurations, -Software, URL see below. 

Microsoft - Software: W Linux - Software *) **) 

only - Windows Server 2003 R2, only - SuSE Linux ES (OEM): LO 

EM64T Standard x64 Edition 

x86_64 - SuSE Linux ES (Support): LS 

Enterprise x64 Edition 

- Red Hat EL (OEM): LO 

- Additional loose - Red Hat EL (Support): LS 

Client-Access-Lizenzen (CALs) 

Manageability Software: V**) 

Details eg. version numbers are published 

in the separate SW-Configurator 

- iRMC2 advanced Pack 

- RemoteDeploy *) Pay attention to the PRIMECLUSTER release and ordering information in the Extranet under 

http://extranet.fujitsu-siemens.com/primecluster 

**) Pay attention to release and order information in PRINCE -> Operating System 

http://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm 

***) Supply over distribution or procurement from FSC VP BC Software 

You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses: 

for internal users: 

for partners: 

http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htm 

http://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htm 

Continue with PRIMERGY 

HW configurator 





Section I Basic unit 

System unit, Rack and Floorstand, including: 

* Lockable front door and sliding screen in floorstand version 

sliding screen for accessible drive bays 

Door for hot plug HDD bays 

Both may be locked or sliding screen may be left open while door is still locked 

* backplane with 4 bays for hot-plug HD's. Type depending on base unit: 

Type 1: 4x hot plug LFF (3.5") SAS/SATA HDD (SAS/SATA LFF base units only) 

Type 2: 8x hot plug SFF (2.5") SAS HDD (SAS SFF base units only) 

* 1 power supply (Standard PS) or hot plug PSU 

in addition there is an upgrade to hot plug redundant PSU available 

* System fan ( No Hot-plug, No redundancy ) 

* 3 bays 5.25" for accessible drives (half Hight) 

* 1 bay 3.5" for FDD 

Systemboard with: 

* One Xeon UP Dual- or Quad-Core CPU supporting 64Bit EM64T and Intel® VT / EIST / DBS Technology. 

* Chipset Intel® 3210 (codenamed Bigby-P) 

* 6 PCI slots: 2x PCIe x8, short (167mm max) 

1x PCIe x4, short (167mm max) 

3x 32Bit / PCI 33MHz, 2x long ( 5V ) 

* 4 memory slots for max. 8GB DDR2 / PC2-6400 RAM 

2-way memory interleave technology => 2 banks with 2 slots each, max. 4GB modul per slot, 

* SATA-Controller on board (supporting RAID 0/1; RAID 5 with iButton Option) 

* 1 Gbit Ethernet LAN on board ( Bcom 5755 ) with TPM 1.2 

and iSCSI boot integrated in System BIOS as selectable option 

* iRMC S2 (integrated Remote Management Controller) on-board server management controller 

with dedicated 10/100 Service LAN-port and 

integrated graphics controller ( max. Resolution: 1600 x 1200 at 16 bpp) 

Interfaces: 

* 1x RS-232-C (9-pin) (usable for BMC or OS or shared) 

* 1x RS-232-C (serial, 9pin), as option 

* 1x Centronics (parallel, 25 pin, EPP/ECP compatible), as option 

* 1x keyboard (PS/2) 

* 1x mouse (PS/2) 

* 1x VGA (15 pin) 

* 8x USB 2.0 ( UHCI ) with 480MBit/s (4x external at the rear, 1x external at the frontside, 

2x internal USB Interfaces for backup devices 1x internal Type A, no USB wakeup) 

* 1x LAN RJ45, 1x Service-LAN RJ45 

*internal Cables: 

1. SATA cable for CD/DVD. 

2. Cable for HDD Backplane 

3. USB cable (for 1 internal Backup) 

* PS/2 mouse (floorstand version only) 

* ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates 

* Documentation engl. (multilingual on CD) 

A 



A 



Floorstand-version 

Basic unit without CPU and Memory 

Rack-version (5U) 

Basic unit without CPU and Memory 

Including 1 power cord with inlet connector 

for non-heating apparatus 

- One CPU ( first CPU ) has to be configured - One CPU ( first CPU ) has to be configured 

additionally for a base configuration additionally for a base configuration 

- One memory kit has to be configured - One memory kit has to be configured 

for a base configuration for a base configuration 

- Mouse with two pushbuttons 

SAS/SATA LFF (3.5") Floorstand-version with: 

SAS/SATA LFF (3.5") Rack-version with: 

- 4-port SAS backplane for 4 hot plug - 4-port SAS backplane for 4 hot plug 

LFF (3.5") SAS/SATA HDDs incl. cables for connection LFF (3.5") SAS/SATA HDDs incl. cables for connection 

to the onboard SATA or plug in SAS controller to the onboard SATA or plug in SAS controller 

- SAS/SATA LFF (3.5") Base Unit - SAS/SATA LFF (3.5") Base Unit 

standard PSU S26361-K1081-V101 standard PSU S26361-K1081-V501 

hot plug PSU S26361-K1081-V201 hot plug PSU S26361-K1081-V601 

SAS SFF (2.5") Floorstand-version with: 

SAS SFF (2.5") Rack-version with: 

- 8-port SAS backplane for 8 hot - 8-port SAS backplane for 8 hot 

plug SFF (2.5") SAS HDDs incl. cables for connection plug SFF (2.5") SAS HDDs incl. cables for connection 

to the plug in SAS controller to the plug in SAS controller 

- SAS SFF (2.5") Base Unit - SAS SFF (2.5") Base Unit 

standard PSU S26361-K1081-V301 standard PSU S26361-K1081-V701 

hot plug PSU S26361-K1081-V401 hot plug PSU S26361-K1081-V801 

S26361-F3436-E4 

no TPM 

Disable function for Trusted Platform 

Use according to import restrictions 

max. 1x per system 

S26361-F3436-E4 

no TPM 

Disable function for Trusted Platform 

Use according to import restrictions 


B1 

B2 

The LFF Base Units offer onboard SATA 

functionality for up to 4 HDD. 

An additional SAS controller is required 

if you need support for SAS HDD. 



B1 

B2 



S26361-F2735-E111 

S26361-F2735-E105 

No Rackmount-Kit option 

RMK-F1_TX150-S6 

Only for loose deliveries 

telescopic rail, full extraction, 

No mounting in Racks possible 

1-hand-mounting 


consisting of 

- 1 pair of telescopic rails 

with easy-mounting-clips 

- 1 bracket DC-PC-3rd-Rack 

1x per system 

S26361-F2735-L105 


for loose delivery 

S26361-F2735-E7 

S26361-F2201-E20 

Cable management PC-Rack Cable arm 3rd P-Rack S26361-F2735-L7 

- for FSC Primecenter / - for 3rd party Cable management PC-Rack 

Datacenter Racks 1x per system for loose delivery 

- not for 3rd party 

1x per system 

S26361-F2201-L20 

Cable arm 3rd party racks 

for loose delivery 

PRIMERGY PRIMECENTER-rack 

SNP:SY-F1647E301-P 

Installation ex works for one 

server or subsystem. 

Hereby the rack will be delivered 

completely pre-mounted and 

all wired connections are tested. 

With racks 12U, 24U, 38U: 

Systems and components 

will be delivered installed in the rack 

With racks 46U: 

Systems and components 

will be delivered separately 

To be ordered only together with 

a PRIMERGY PRIMECENTER rack 

e.g.: 

S26361-K826-V10x 

refer configurator PC-Rack 

max. 1x per System 

PRIMERGY 42/23U rack 

PRIMERGY Classic 19" rack is not supported 

"Rack-mounting ex factory" 

This service is to be ordered once 

per installable server/storage 

subsystem, in order to get the 

server/storage subsystem 

mounted into the PRIMERGY racks. 

In case of the 46 U PRIMERGY Rack, 

this service has to be ordered, 

to get the mounting kits and the 

cables installed. 

For later conversion the following kits are available: 

FSC PC-/DC-/3rd party- Rack 

1.) Conversion kit 2 Floor -> Rack S26361--F2618-L250 

Conversion PRIMERGY TX150 S6 base unit floorstand into 

base unit rack. Only conversion, no mounting kit. 

Mounting kit has to be ordered seperatly 

plus 

2.) Mounting Kit FSC PC-/DC-/3rd party- Rack S26361-F2735-L105 

incl. DC- PC- bracket, no cable managment 


This kit will fit in server racks 

conforming to EIA standards EIA-310-D for 19" racks. 

3.) cable management or cable arm 

to be ordered additionally 

and 

either one to be ordered 

FSC PC-/DC- Rack cable management or S26361-F2735-L7 or 

3rd party- Rack cable arm 

S26361-F2201-L20 

C 

For Base Units with hot plug PSU only (V201, V401, V601, V801) 

S26113-F483-E11 

2nd power supply module (PSU) 

Floorstand Versions 

for redundancy 

A second, redundant power supply requires an additional power cord (section XIII) 

occupies one bay for 

For later conversion of basic units with standard power supply 

hot plug power supply 

to hot plug power supply, the following kit is available: 

max. 1x per system 1.) hot plug PS upgrade kit, incl. 1 PS module + cable: S26113-F483-L6 

Conversion standard into hot plug PS 

2.) Supplementary power supply module S26113-F483-L11 

for redundancy or repair 




C PRIMERGY TX150 S6 Status 2008-04-14 

Section II Processor 

One of following CPU´s has to be selected 

for an orderable basic unit 

Mono-Core CPU`s 

- 1x 32-bit Intel Celeron (512 kB SLC = Second Level Cache on Chip ) 

and with heat 1066 pipe or 1333MHz Frontside Bus 

occupies socket for CPU 

Celeron 440 (2.0GHz/512kB/800) / 35W 

S26361-F3239-E440 

Dual-Core CPU`s 

- 1x 64-bit Intel 

Pentium Dual Core E2xxx (1MB SLC) or 

Core2 Duo E4x00 (2MB SLC) or 

Xeon UP (4/6MB SLC) 


occupies socket for one CPU 

Pentium Dual Core E2160 (1.8GHz/1M/800) / 65W S26361-F3239-E216 

Core2 Duo E4500 (2.2GHz/2M/800) / 65W S26361-F3239-E450 

Core2 Duo E4600 (2.4GHz/2M/800) / 65W S26361-F3239-E460 

Xeon UP 3065 (2.33GHz/4M/1333) / 65W S26361-F3239-E306 

Xeon UP E3110 (3.00GHz/6M/1333) / 65W S26361-F3239-E311 

Quad-Core CPU`s 

- 1x 64-bit Intel Xeon UP (8/12MB SLC = Second Level Cache on Chip ) 


occupies socket for one CPU 

Xeon UP X3210 (2.13GHz/8M/1066) / 95W S26361-F3239-E321 

Xeon UP X3220 (2.30GHz/8M/1066) / 95W 

On request 

Xeon UP X3350 (2.66GHz/12M/1333) / 95W S26361-F3239-E335 

Xeon UP X3360 (2.83GHz/12M/1333) / 95W 

On request 

Section III Memory 

There are 2 memory banks with 2 DIMM slots each. 

Single channel memory configuration allow maximum flexibility: 

Additional memory can be configured as single memory modules. 

Dual channel memory configurations for maximum performance: 

For optimum performance memory has to be configured in pairs of memory modules with identical size. 

- For each basic unit slot 1 has to be equipped with one memory module, 

(either 512MB, 1GB, 2GB) 

Minimum one Memory ( one module ) = first Memory has to be selected for an orderable basic unit 

S26361-F3870-E513 S26361-F3870-E514 S26361-F3870-E515 

Main memory 512MB Main memory 1GB Main memory 2GB 

4x DDR2 800/PC2-6400 ub ECC DDR2 800/PC2-6400 ub ECC DDR2 800/PC2-6400 ub ECC 

consisting of one module consisting of one module consisting of one module 

occupies one slot occupies one slot occupies one slot 

max. 4x per system max. 4x per system max. 4x per system 

Section IV Graphics 

Graphics controller integrated in iRMC2 (integrated Remote Management Controller) 

( max. Resolution: 1600 x 1200 at 16bpp ) 

D 




D PRIMERGY TX150 S6 Status 2008-04-14 

Section V Accessible drives 

There are 3 bays (1.6" x 5.25") for accessible drives and 1 bay for FDD. 

For LFF SAS base units an HDD extension box can be configured 

( occupies 2x 5,25" ) providing 2x LFF (3.5") bays for hot plug HDDs. 

S26361-F2826-E102 

S26361-F2826-E203 

F-D-L-HDD-Box 2 mounting Kit sl DVD and CSS F-D-L-HDD-Box 2 

Occupies two 5.25" x 1.6" bays Occupies one 5.25" x 1.6" bays to be used in SAS LFF 

in the accessible bay area in the accessible bay area (3.5") Base Unit only 

Offers bays for: 

Offers bays for: 

- 1x CSS option - 1x CSS option 

- 1x 0.5 * 5.25" SATA DVD-ROM - 1x 0.5 * 5.25" SATA DVD-ROM see Conf. diagram Option C 

- 2x 1 * 3.5" SAS HD`s max. 1x per system 

One 0.5 * 3.5" anthracite bezel 

for CSS bay 

S26361-F2557-E201 

One 0.5 * 5.25" anthracite bezel Local Service Panel incl. adapter 

for 0.5 * 5.25" DVD bay Customer Self Service see Conf. diagram 

Two 1 * 3,25" anthracite bezels CSS module incl. adapter Option A 

for SAS HDD bays 0.5" x 5.25" 

max. 1 per system 

max. 1x per System 

S26361-F2557-E204 

Local Service Panel incl. mount. kit 

Customer Self Service 

CSS module incl. mounting kit 

0.5" x 5.25" 


S26361-F3268-E1 

CD-RW / DVD drive 0.5" 

24/24/24x / 8x 

SATA 

S26361-F3269-E1 

DVD-RW 8x super multi drive 

all formats, DUAL/DL, DVD-RAM 

SATA 

0.5 x 5.25", anthracite bezel 0.5 x 5.25", anthracite bezel 



S26361-F3266-E1 

S26361-F3267-E1 

DVD-ROM 16/48x 

DVD-RW 16x super multi drive 

all formats, DUAL/DL, DVD-RAM 

SATA 

SATA 

incl. description (Ger/US) 

1.6 x 5.25", anthracite bezel 1.6 x 5.25", anthracite bezel 



S26361-F2575-E1 

Floppy disk drive 1" 

Connector: 26pin 

If installation is done locally, make sure you have internal 

or external FDD available for driver installation. 

Following USB Components are available 

incl. description (Ger/US) 1) USB DVD+-RW: Traveller III DVD DL super multi drive (USB cable incl.) S26391-F3152-L300 

1" * 3.5", anthracite bezel 2) FDD USB: external USB FDD (USB cable included) S26391-F264-L226 

max. 1x per system 3) USB Keyboard: KBPC PX D, professional keyboard S26381-K340-V120 

4) USB Mouse: Optical Wheel Mouse S26381-K403-L100 

5) USB Memorybird: 2GB S26391-F6047-L102 

4GB (as soon as available) 

S26391-F6047-L104 

E 




E PRIMERGY TX150 S6 Status 2008-04-14 

internal backup devices 

S26361-F3270-E1 

SCSI U320 Controller 

Adaptec SCSI Card ASC-29320LPE (Colonial) 

1 channel: LVD 

LVD connect. for HD, without cable 

PCIe 


S26361-F2814-E6 

68-Pin Kit for accessible drives 

Cable with Terminator 

To connect acc. drives to 

separate SCSI controller 


S26361-F3157-E3 

Tape drive LTO2HH Ultrium 

200GB, 24MB/s, U160 SCSI 

S26361-F3459-E3 

Tape drive LTO3HH Ultrium 


Connector: HD68 


1x without cable without cable 



data and cleaning cartridge 


1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel 



S26361-F3460-E3 

Tape drive Entry LTO Ultrium 



without cable 

S26361-F2848-E3 

Tape drive DDS Gen5 

S26361-F2848-E31 (only for OBDR) 

DDS-G5 for One buttom dis. recov. 

36GB, 3MB/s, U2W SCSI 



2x data and cleaning cartridge without cable 

1.6 * 5.25", anthracite bezel incl. description (Ger/US) 



1.6 * 5.25", anthracite bezel 


as soon as available 

S26361-F3325-E3 S26361-F3324-E3 S26361-F3857-E1 

Tape drive DDS Gen6 USB 5.25" Tape drive DDS Gen5 USB 5.25" RDX drive USB 5.25" internal 

80GB, 6MB/s, USB 2.0 36GB, 3MB/s, USB 2.0 80-160GB, 25MB/s, USB 2.0 

Connector: USB "B" Connector: USB "B" Connector: USB "B" For later installation 

incl. description (Ger/US) incl. description (Ger/US) incl. description (Ger/US) of DDS Drives use 

data and cleaning cartridge data and cleaning cartridge without RDX cartridges S26361-F3324-L4 

1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel 1.6 * 5.25", anthracite bezel 


SCSI Controller for external backup drives (PRIMERGY SX10) 

S26361-F3270-E1 

SCSI U320 Controller 

Adaptec SCSI Card ASC-29320LPE (Colonial) 

1 channel: LVD 

LVD connect. for HD, without cable 

PCIe 


RDX cartridges must be ordered separately 

RDX 80GB = S26361-F3857-L80 

RDX 120GB = S26361-F3857-L120 

RDX 160GB = S26361-F3857-L160 (later) 

SAS Controller for external backup drives (FiberCat TXF) 

as soon as available 

S26361-F3271-E1 

8port SAS 

LSI3442E 

4port intern, 4port extern 

PCIe 


F 




F PRIMERGY TX150 S6 Status 2008-04-14 

Section VI Hard disks drives 

SAS/SATA LFF (3.5") Base Units: SAS HDD Require SAS Controller! see section VIII internal Disk Array 

There is a 6 port SATA controller in the Base Unit. 

Up to 4 SATA LFF (3.5") hard disks can be configured. 

Mixed Configurations are not supported in SATA base units. 

If you need SAS, you can choose between two types of 8 port SAS controller to enable the Base Unit. 

Up to 4 SAS or SATA LFF (3.5") hard disks can be configured. 

If LFF SAS HDD Extension Box, Option C is used up to 6 SAS LFF (3.5") hard disks can be configured. 

Mixed Configurations of SAS and SATA HDDs connected to the same Backplane are not supported. 

If you need to run Mixed Configurations: 

- order the SATA drives needed as L-Number 

- make shure SAS and SATA drives are not used on the same Backplane 

Hot replace is only possible running RAID. 

4/6x 

S26361-F3204-E573 S26361-F3204-E514 S26361-F3204-E530 

HD 73GB 15krpm 3.5" HD 146GB 15krpm 3.5" HD 300GB 15krpm 3.5" 

15.000rpm,


G PRIMERGY TX150 S6 Status 2008-04-14 

Section VII External SAS Disk Array 

Section VIII internal Disk Array 

SATA Configuration 

SATA Base Units contain a 6-port on-board SATA controller supporting RAID Levels 0, 1 

RAID 5 requires a FW-Extension option (iButton) 

S26361-F3217-E100 

SATA Software RAID5 LSI 

LSI MegaSR 

enabling key 

SATA 3Gb/sec 

internal SATA port only 

uses SATA ports of Southbridge 


SAS Configuration 

you can choose between two types of 8 port SAS controller for the Base Unit: 

- LSI 1068e based Modular RAID 0,1 (IME) 

- LSI 1078 based Modular RAID 5,6 

if you want to use SAS harddisks one Controller is required 

Controller for 1 to 8 LFF (3.5") or SFF (2.5") HDD 

S26361-F3257-E8 S26361-F3257-E256 S26361-F3257-E512 

8 port SAS RAID Controller 8 port SAS RAID Controller 8 port SAS RAID Controller 

LSI LSI LSI 

MegaRAID SAS 1068 MegaRAID SAS 1078 MegaRAID SAS 1078 

RAID 0, 1 & 1E 256MB Cache with ECC 512MB Cache with ECC 

no controller cache optional BBU optional BBU 

SAS 3Gb/sec SAS 3Gb/sec SAS 3Gb/sec 

8 internal ports 8 internal ports 8 internal ports 

PCIe x4, 160mm PCIe x4, 160mm PCIe x4, 160mm 

with combi bracket with combi bracket with combi bracket 


S26361-F3257-E55 

Cache Battery Backup Unit 

max. 1x per Controller 

L-Order-Number is: 

S26361-F3257-L10 

H 



H 



Section IX Fibre Channel 

Fibre Channel Controller for external drives, subsystems and FC SAN 

3x 

S26361-F3864-E1 

4GBit/s FC Controller 

Emulex 

LPe111, full height bracket 

1 channel 4GBit/sec FC Controller 

LC Interface for 50µm Fiber 

PCIe x4, 170mm 

max. 2 per system 

All controllers for the connection of external storage systems are delivered without cables. 

For the configuration of external cabling see the configurator for external storage systems. 

For Fibre Channel SAN also other componets like switches, SFPs and optical wires are 

orderable (for details see price liste) 

Internal cables and adapter are included all in the basic unit or the components. 

I 



I PRIMERGY TX150 S6 Status 2008-04-14 

Section X Communication / Network 

1x on-board LAN Controller 

Fast Ethernet Controller on-board 

1GBit Bcom 5755 

with TPM 1.2 

ext: for RJ 45 connector 

SW: VLAN 

Teaming: Failover, Load Balancing 

If used with additional server adapter, the 

onboard LAN controller can operate in Teaming Mode. 

A) PCI Adapters with Teaming capability 10-1000TX /SX 

S26361-F3142-E2 

Teaming: Failover, Load Balancing 

Gigabit Ethernet Controller 1000TX 

If used with additional server adapter, the 

2x Eth Ctrl 1x1Gbit PCI32 PRO/1000GT Cu Intel Pro/1000 GT Desktop Adapter can operate in Teaming Mode. 

Intel Pro/1000 GT Desktop Adapter 

PCI 32 (33/66MHz), 

ext: for RJ45-connector, Cat 5 


B) Dual Port PCI-Express Adapter 1000TX 

S26361-F3228-E1 

Gigabit Ethernet Controller Dual 1000TX 

Eth. Ctrl 2x1Gbit PCIe PRO/1000PT Cu 

Intel Pro/1000PT dual Port Server Adapter 

PCIe x4 

ext: for RJ45-plug, Cat 5 


C) PCI-Express Adapter 1000TX/SX 

S26361-F3241-E1 

S26361-F3242-E1 

Gigabit Ethernet Contr. 1000TX Gigabit Ethernet Contr. 1000SX 

Eth Ctrl 1x1Gbit PCI-e Pro/1000PT Cu Eth Ctrl 1x1Gbit PCI-e Pro/1000PF LC 

3x Intel PRO/1000 PT Server Adapter Intel PRO/1000 PF Server Adapter 

PCIe x1 

PCIe x4 

ext: for RJ45-connector, Cat 5 ext:LC-connector 



D) Quad Port PCIe Adapter 1000TX 

S26361-F3462-E1 

Gigabit Ethernet Controller Quad 1000TX 

Eth Ctrl 4x1Gbit PCI-X PRO/1000PT Cu 

Intel PRO/1000 PT Quad Port Low Profile Server Adapter 

PCIe x4 

ext: for RJ45-plug, Cat 5 


J 




J PRIMERGY TX150 S6 Status 2008-04-14 

Section XI System management options 

S26361-F1790-E241 

iRMC2 advanced pack 

integrated remote management controller 

activation key for 

graphical console redirection 

and remote media redirection 


S26361-F1790-E221 

RemoteView Software V5.0 

Installation and configuration of 

RemoteView Web and LAN FrontEnd 

BMC-Manager, RTDS and FreeDOS 

Online manuals 

Section XII Miscellaneous 

S26361-F2571-E8 

External on-board parallel port Interface 

Cable and external 

connector interface (25 pins) 

fits I/O shield cutoff 

max. 1x per system for ext. 

S26361-F2571-E10 

External on-board serial port Interface 

Cable and external 

connector interface (9 pins) 

fit´s PCI cutoff (see Info-Box) 

max. 1x per system for ext. 

housing offers addional cutoff - no PCI slot occupied 

K 




K PRIMERGY TX150 S6 Status 2008-04-14 

Section XIII Country specific power cords 

A country specific power cord has to be ordered for all floorstand versions: 

- once per basic unit and an additional second cable 

- if an second hot plug, redundant power supply modul is ordered. 

PRIMERGY TX150 S6 Floorstand 

PRIMERGY TX150 S6 Rack 

Power cord for following countries: 

1,8 m, grey Country specific power cords are not 

required for rack versions, except for USA 

T26139-Y1740-E10 D, A, B, F, NL, FIN, S, N, E, P, RUS, TR &Canada. Power cords are shipped in a rack 

max. T26139-Y1742-E10 USA, Canada version with inlet connector for non-heating 

2 x T26139-Y1743-E10 Switzerland apparatus. (1x with Standard PSU, 

T26139-Y1744-E10 UK, Ireland 2x with hot plug upgrade) 

T26139-Y1745-E10 Italy 

T26139-Y1746-E10 Denmark T26139-Y1742-E10 USA, Canada 

T26139-Y3850-E10 Option "no powercord", for Countries without For shipments to USA&Canada, you have to order 

specific cable orderable like e.g. China 

one power cord (1,8m, grey) per power supply. 

Attention: For connection of a monitor 

to the system an additional country 

specific power cord has to be 

ordered as option. 

Power cord for optional monitor connection for the following countries: 

1.8m, grey 

T26139-Y1740-L10 

T26139-Y1742-L10 

T26139-Y1743-L10 

T26139-Y1744-L10 

T26139-Y1745-L10 

T26139-Y1746-L10 

D, A, B, F, NL, FIN, N, S, E, P, RUS, TR 

USA, Canada 

Switzerland 

UK, IR 

Italy 

Denmark 

Options and other peripherals 

For other options, refer to SystemArchitect and Pricelist. 

These options are supplied lose with the shipment. 

For suitable peripherals for this product, please refer to SystemArcitect. 

Option for Floorstand 

keyboards for floorstand versions for following countries: USB Keyboard: S26381-K340-E120 

S26381-K397-E110 USA / international KBPC PX D, professional keyboard 

S26381-K397-E120 Germany 

S26381-K397-E140 France 

S26381-K397-E155 Sweden / Finland 

S26381-K397-E165 United Kingdom 

S26381-K397-E180 Spain 

S26381-K397-E185 Italy 

End PRIMERGY TX150 S6 





Change Report 

Date Order number Changes 

30.04.2008 S26361-F3239-E214 Pentium DC E2140 no longer available 

17.03.2008 S26361-F3239-E460 Core2 Duo E4500 (2.4GHz/2M/800) / 65W now available 

17.03.2008 S26361-F3239-E216 Pentium Dual Core E2140 (1.8GHz/1M/800) / 65W now available 

11.03.2008 S26361-F3204-E114 no longer available 

11.03.2008 S26361-F3204-E173 no longer available 

19.02.2008 S26361-F3239-E335 New CPU 

2007-12-20 S26361-F3436-E4 No TPM - now available 

2007-11-22 first draft

PRIMERGY TX150 S6

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?