HP BladeSystem c7000 Enclosure

QuickSpecs HP BladeSystem c7000 Enclosure 

Overview 

HP BladeSystem c7000 Enclosure - Front View HP BladeSystem c7000 Enclosure - Rear View 

1. Device Bay 1 1. Active Cool 200 Fans & fan bays 

2. Device Bay 2 2. Interconnect Bays 

3. Device Bay 3 3. BladeSystem Onboard Administrator 

4. Device Bay 4 4. Power Inputs (single phase model shown) 

5. Device Bay 5 












17. Power Supply Bay 1 






23. Insight Display 

What's New 

HP BLc Single Phase Intelligent Power Module 

DA - 12810 Worldwide QuickSpecs — Version 40 — 9.24.2012 Page 1


Overview 

At A Glance 

This document covers the HP BladeSystem c7000 Enclosure. For more information on HP ProLiant Server Blades and HP 

BladeSystem c-Class Interconnect Components please see the following QuickSpecs: 

HP BladeSystem c-Class Server Blades: 

http://h18000.www1.hp.com/products/quickspecs/division/12534.html 

HP BladeSystem c3000 Enclosure QuickSpecs: 

http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html 

HP BladeSystem solutions start with a BladeSystem c7000 Enclosure, optional c7000 hot-plug power supplies, HP Active 

Cool Fans, and an optional redundant BladeSystem Onboard Administrator module. Once the enclosure has been 

selected, the following components can be added: networking interconnect modules, HP ProLiant and Integrity Server 

Blades, and Insight Control management software. Reference the QuickSpecs listed above. 

Warranty - This product is covered by a global limited warranty and supported by HP Services and a worldwide 

network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from 

date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional 

support may be covered under the warranty or available for an additional fee. Enhancements to warranty services 

are available through HP Care Pack services or customized service agreements. 

Enclosure: Three-year parts and labor, on-site limited global warranty. Certain restrictions and exclusions 

apply 

Enclosure options: Fans, Power Supplies, BladeSystem Onboard Administrator, 1 Year parts only or enclosure 

warranty 

HP BladeSystem Interconnects: 1 Year parts and labor, on-site regardless of the warranty period for the 

system in which they are installed 

HP Storage Fibre Channel switches have a maximum warranty period of one (1) year regardless of the 

warranty period for the system in which they are installed 

Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs for details. 

For additional information please visit: http://www.hp.com/go/bladesystem 



HP BladeSystem c-Class Overview 

HP BladeSystem c- 

Class c7000 Enclosure 

A BladeSystem c7000 enclosure holds up to 16 server and/or storage blades plus redundant 

network and storage switches. It includes a shared, multi-terabit high-speed mid-plane for wireonce 

connectivity of server blades to network and shared storage. Power is delivered through a 

pooled power backplane that ensures the full capacity of the redundant hot-plug power supplies 

is available to all blades. 

Each c7000 enclosure is built with the following functions: 

Up to 16 half-height and/or up to 8 full-height server blades and/or storage blades per 

enclosure. 

Up to 4 different interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported 

simultaneously within the enclosure. 

Choice of a single-phase, three-phase or a -48V DC power subsystem for flexibility in 

connecting to datacenter power. 

HP Thermal Logic technology for lower power consumption and airflow. 

Four (4) or Ten (10) Active Cool 200 fans as standard. For redundancy and improved 

power consumption and acoustics; additional Active Cool 200 Fan kits can be added for a 

maximum of 10 fans. 

Redundant hot-plug cooling, redundant hot-plug power supplies, redundant connections, 

redundant interconnect modules, optional redundant BladeSystem Onboard Administrator 

management modules. 

Lowest cost of ownership. 

Full AC redundancy - with no power zones. 

An BladeSystem Onboard Administrator management module is built in to the enclosure with the 

following functions: 

Robust, multiple enclosure setup and control. 

Reports asset and inventory information for the devices in the enclosure. 

Reports thermal and power information, including real-time actual power usage per server 

and per enclosure. 

Front-mounted Insight Display for easy management within the datacenter. 

Integrated access to all server blade iLOs from a single cable. 

Provides integrated access to interconnect bay device management ports from the single 

BladeSystem Onboard Administrator cable. 

Single sign-on capability for all devices in the enclosure 

Role-based security locally and/or with LDAP directory services. 

Provides a wizard-based initial setup process for easy configuration. 

A BladeSystem c7000 enclosure provides the following benefits: 

With local and remote hardware management integrated across the solution, one full 

enclosure can be managed as easily as one server. 

Scalable: Management and network interconnects extend scalability beyond a single 

enclosure, allowing resources to be pooled and shared across multiple enclosures. 

Investment protection: Accommodates multiple server and network designs in one 

enclosure. 

Lower costs per server, in comparison to rack-mounted servers 

Lower power consumption, in comparison to rack-mounted servers. 

Lower airflow requirements, in comparison to rack-mounted servers 

HP c3000 Enclosure For customers that need a smaller system the c3000 is the perfect solution. Supporting up to 8 

blades and 4 interconnects the c3000 enclosure provides and ideal solution for Small and 

Medium businesses and remote sites for more information refer to the c3000 QuickSpecs at: 





HP ProLiant & Integrity Delivering best-in-class performance, choice and reliability on AMD Opteron, Intel® Xeon® 

Server Blades and Intel® Itanium 2® processors for Windows, Linux, Solaris, or HP-UX based servers; the HP 

portfolio of server blades supports a variety of application requirements for scale-out 

architectures. HP offers one-, two-, and four-processor server blades, with the widest range of 

performance, and form factors. 

For more information please see: 


HP SB40c Storage 

Blade 

HP Ultrium Tape 

Blades 

HP Network Storage 

Servers 

Direct attached storage 

The SB40c Storage Blade delivers direct attached storage for c-Class servers, with support for 

up to six hot plug small form factor (SFF) SAS or SATA hard disk drives. The enclosure 

backplane provides a PCI Express connection to the adjacent c-Class server blade and enables 

high performance storage access without any additional cables. The SB40c Storage Blade 

features an onboard Smart Array P400 controller with 256 MB battery-backed write cache, for 

increased performance and data protection. 

Shared storage 

Use HP LeftHand P4000 Virtual SAN Appliance (VSA) software to turn the SB40c into an iSCSI 

SAN for use by all severs in the enclosure and any server on the network. HP LeftHand VSA 

software is installed in a virtual machine on a VMware ESX host server adjacent to the SB40c. 

HP LeftHand P4000 VSA turns the SB40c into a scalable and robust iSCSI SAN, featuring, 

storage clustering for scalability, Network RAID for storage failover, thin provisioning, snapshots, 

remote replication, and cloning. Expand capacity within the same enclosure or to other 

BladeSystem enclosures by adding additional SB40c Storage Blades and HP LeftHand VSA 

licenses. http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html 

The HP SB1760c is an LTO-4 Ultrium, 1.6 TB capacity on a single cartridge (2:1 compression), 

576 GB/hr performance (2:1 compression), 128 MB buffer size, WORM capability, AES 256-bit 

hardware data encryption capability. 

Tape blades are ideal for HP BladeSystem c-Class customers who need a data protection 

solution but are not connected into a Storage Area Network (SAN). They provide direct attach 

data protection for the adjacent server and network backup protection for all other data within the 

enclosure. The HP tape blades are the industry's first bladed tape drives and are developed 

exclusively for the BladeSystem c-Class enclosures. 

For more information, please visit: 


HP X1800sb Network Storage Blade 

HP X1800sb Network Storage Blade is a flexible storage server solution for BladeSystem 

environments. Combine the X1800sb with the SB40c Storage Blade to enable file serving and 

iSCSI shared storage inside the BladeSystem enclosure. The flexibility of the X1800sb extends 

to external storage as well. The X1800sb can also be used as a low cost SAN gateway to 

provide consolidated file-serving access to FC, SAS, or iSCSI SANs. 

NOTE: See the QuickSpecs for Technical Specifications and additional information: 


HP X3800sb Network Storage Gateway 

The X3800sb Network Storage Gateway Blade is used to access FC, SAS, or iSCSI SAN 

storage, translating file data from the server into blocks for storage to provide consolidated file, 

print, and management hosting services in a cluster-able package. 

Built on the HP ProLiant BL460c Server Blade, the HP X3800sb Network Storage Gateway 

Blade is a ready to deploy SAN gateway solution, with Microsoft Storage Server 2008, Enterprise 

x64 Edition pre-installed. The HP Rapid Start-up Wizard accelerates new deployments by 




Dynamic Power 

Capping 

Rack Airflow 

Requirements 

Factory Express 

Portfolio for Servers 

and Storage 

walking you through basic system settings step-by-step. The X3800sb also includes a Microsoft 

Cluster Server (MSCS) license and Microsoft iSCSI Software Target. 

NOTE: See the QuickSpecs for Technical Specifications and additional information: 


HP Dynamic Power Capping is the industry's first and only power capping solution that lets you 

reclaim trapped power and cooling capacity without putting electrical infrastructure or server 

performance at risk. The enclosure Dynamic Power Cap will be shared amongst all of the 

installed devices and individual server caps will be changed to match the server load. This will 

optimize the performance of the servers while ensuring that the enclosure stays below the cap 

value. 

Rack 10000 G2 series cabinets 

The increasing power of new high-performance processor technology requires increased cooling 

efficiency for rack-mounted servers. The G2 10000 Series Racks provide enhanced airflow for 

maximum cooling, allowing these racks to be fully loaded with servers using the latest 

processors. 

NOTE: For operation with the DC Input Module the G2 1000 Series Rack Extension is required 

to allow DC Power Cabling to be installed. 

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure 

adequate airflow and to prevent damage to the equipment: 

Front and rear doors: If your 42U server rack includes closing front and rear doors, you 

must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom 

to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). 

The clearance from face of rack to inside of the front door needs to be 1.75" minimum. 

Side: The clearance between the installed rack component and the side panels of the rack 

must be a minimum of 2.75 inches (7 cm). 

Depth: Minimum 39.4 inches (1000mm) for AC power, 47 inches (1200mm) for DC Power 

Input 

Adjustable rack rails are shipped with each enclosure: 

Minimum rail length: 25 inches (635mm) 

Maximum rail length: 34 inches (864mm) 

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the 

rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in 

improper cooling that can lead to thermal damage. 

HP Factory Express offers configuration, customization, integration and deployment services for 

HP servers and storage products. Customers can choose how their factory solutions are built, 

tested, integrated, shipped and deployed. 

Factory Express offers service packages for simple configuration, racking, installation, complex 

configuration and design services as well as individual factory services, such as image loading, 

asset tagging and custom packaging. HP products supported through Factory Express include: a 

wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant & Integrity Server 

Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable 

tape libraries and configurable network switches. 

For more information on Factory Express services for your specific server model please contact 

your sales representative or go to: http://www.hp.com/go/factory-express 




HP Simple 

Configurator 

SCE is a guided self service tool to help sales and non technical people provide customers with 

initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration 

help, or use in your existing ordering processes. If you require "custom" rack configuration or 

configuration for products not available in SCE, please contact HP's Customer Business Center 

or an Authorized Partner for assistance. http://www.hp.com/products/configurator 

HP Insight 

Insight Management Managing the growing number of servers can be complex and 

management software 

expensive for your organization. IT managers need to address 

changing business needs with tools that meet the challenges of 

managing today's complex Datacenters. 

HP Insight Management lowers the cost of running your HP ProLiant 

servers by providing you with best-in-class management tools, 

including HP Insight Control, HP Virtual Connect Enterprise Manager 

(VCEM), and HP Insight Dynamics / Matrix Operating Environment. 

Insight Management increases your productivity and reduces your 

operating costs to get you higher value from your HP ProLiant servers. 

Electronic download of Insight Management Media 

Insight Management software media is available for free download (not 

including license entitlement certificates) at this website: 

http://www.hp.com/go/insightupdates. 

Software media available for download includes: 

HP Insight Control 

HP Insight Control for Microsoft® System Center 

HP Insight Control for VMware vCenter Server 

HP Virtual Connect Enterprise Manager (VCEM) 

HP Insight Dynamics / Matrix Operating Environment 

Customers will receive an Insight Control or Insight Dynamics license 

entitlement certificate via physical shipment or email. The license 

entitlement certificate must be redeemed online or via fax in order to 

obtain the license activation key(s). 

One year of 24x7 Software Technical Support and Updates are 

included with your purchased licenses. 

HP provides a complete range of installation and support services to 

ensure the successful deployment and operations of your server 

infrastructure. For more information about support services and 

licensing 

options, see the following website: 

http://www.hp.com/go/insightsoftware 

Insight Software Media Kit (DVDs) 

Physical media (DVDs) are also available for purchase from HP or from 

your authorized reseller (PN 436222-B21) 

HP Insight Foundation Insight Foundation is being baselined at version v8.70 which means 

the following: 

Its Media Kit (contains 2 SmartStart CDs, the Firmware DVD, 

and the Management DVD) will continue to ship with all 

supported ProLiant G7or earlier BTO servers until the last 

supported server is no longer shipping. 

The media kit was an orderable option for BladeSystem 




HP Integrated Lights- 

Out (iLO) 

enclosures, so changes mean: 

ProLiant G7 or earlier CTO servers are able to order the 

Media Kit with the understanding that the media is not 

updated. 

The Media Kit will not be updated past version 8.70. 

PSP and Firmware DVD downloads will be updated through the 

second release of the ProLiant Gen8 servers at the HP Insight 

Foundation Suite for ProLiant downloads tab: 

http://www.hp.com/go/foundation 

Customers are urged to use the replacement product, HP Service Pack 

for ProLiant, instead of Insight Foundation Suite which is found at 

these location: 

www.hp.com/go/spp 

www.hp.com/go/spp/download 

HP Integrated Lights-Out (iLO) simplifies server setup, health 

monitoring, power and thermal control, and lights-out remote 

administration of ProLiant ML, DL, and BL servers. HP iLO functions 

without additional software and can be accessed from any location via 

a web browser. HP iLO works hand-in-hand with HP Systems Insight 

Manager, Insight Control and Insight Dynamics for ProLiant, helping 

customers unleash the value of the ProLiant platform and deliver the 

highest possible quality of IT service. For more information, visit: 

www.hp.com/go/iLO 

HP Insight Control HP Insight Control, a product option, delivers essential infrastructure 

management that can help save time and money by making it easy to 

deploy, monitor, remote control, and optimize your IT infrastructure 

through a single, simple management console. 

HP Matrix Operating 

Environment 

Two versions of Insight Control are available, to serve environments 

requiring either a Linux-based or a Windows-based central 

management servers: HP Insight Control for Linux, and HP Insight 

Control. See www.hp.com/go/insightcontrol 

HP Insight Control includes one year of 24 x 7 HP Software Technical 

Support and Update Service ensuring rapid access to HP support staff 

and proactive delivery of software updates. For more information about 

this service, please visit: http://www.hp.com/services/insight. 

The HP Matrix Operating Environment (Matrix OE) for ProLiant and 

Integrity servers is an integrated command center that helps you 

instantly adjust to dynamic business demands. This advanced 

infrastructure management software lets you reduce the cost of 

common data center tasks by up to 40 percent while keeping pace with 

your changing business. 

The HP Matrix OE includes the automated provisioning, optimization, 

and recovery management capabilities for HP CloudSystem Matrix, the 

ideal platform for private cloud and Infrastructure as a Service (IaaS). 

NOTE: For more information, visit: http://www.hp.com/go/matrixoe 




HP BladeSystem 

Power Sizer 

The HP BladeSystem Power Sizer helps in sizing the power infrastructure needed for a HP 

BladeSystem solution. This sizer enables effective planning for the power consumption and heat 

load of the BladeSystem at its site. 

The sizer enables you to: 

Select the type and number of components within each Blade Server and Blade Enclosure. 

View the effect of component changes on the power consumption and heat loading. 

Review server loading and determine power supply and power subsystem requirements. 

Approximate electrical and heat load for facilities planning purposes. 

The sizing estimate is based on component level power measurements for a system operating at 

very high enterprise application loads. 

Values obtained from the BladeSystem Power Sizer are estimates for planning purposes only. 

Actual measured power consumption can be significantly lower or higher than the Power Sizer 

estimates. Actual power consumption varies with application type, application utilization, and 

ambient temperature. 

The p-class BladeSystem and the c-Class BladeSystem solutions are supported in the 

BladeSystem Power Sizer. 

Available at: www.hp.com/go/bladesystem/powercalculator 

HP Power Advisor The HP Power Advisor is a tool provided by Hewlett-Packard to assist in the estimation of power 

consumption and proper selection of components including power supplies at a system, rack, 

and multi-rack level. A variety of additional features are also provided including a condensed bill 

of materials, a cost of owner ship calculator, and a power report. The HP Power Advisor allows 

for the mixing of rack, tower, blade, and other products in a single environment. 

Available at: www.hp.com/go/hppoweradvisor 



Service and Support 

Service and Support HP Technology Services for Industry Standard Servers and BladeSystem 

Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner 

who understands your increasingly complex business technology environment. That's why it 

makes sense to team up with the people who know HP infrastructure hardware and software best 

- the experienced professionals at HP Services. 

Optimized Care 

Package 

What HP ProLiant and BladeSystem Services can do for you 

HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and 

manage IT and infrastructure solutions. This way, HP proposes services solutions that include 

more than just uplift of base warranty. Foundation Care services deliver scalable supportpackages 

for HP industry-standard servers and software. You can choose the type and level of 

service that is most suitable for their business needs. New to this portfolio is HP Collaborative 

Support. If you are running business critical environments, HP offers Proactive Care or Critical 

Advantage. These services help deliver high levels of application availability through proactive 

service management and advanced technical response. 

You can get the support you need by choosing from one of a number of service packaged 

solutions we have designed to address wider set of customer support needs. 

HP Technology Services meets business challenges with services offered in three support 

recommendations - Optimized Care Package, Standard Care Package, and Basic Care - 

available for each product group. Such packaged solutions enable customers to optimize 

technology operations, minimize risk and drive better business outcomes with easy-to-buy, easyto-use 

scalable support packages for servers, storage, networking and software. 

All three service recommendations include support services from the broader portfolio of 

Foundation Care and Proactive Care services. 

Supports maintaining servers at optimum performance availability 

HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for 

c3000/c7000 enclosure 

Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade 

enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, 

PMP and VPM. http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf 

3-Year HP 24x7 4 hour Response, Proactive Care OR Critical Advantage for c3000/c7000 

enclosure + 3-Year HP 24x7 4 hour Response, Proactive Care or Critical Advantage for 

Blade server 

Helps optimize your systems and delivers high levels of application availability through proactive 

service management and advanced technical response. A skilled Technical Manager will own 

your query or issue end to end until resolved, delivering a single point of contact for you. 

http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA3-2140ENW.pdf 

Additional Services: Virtualization Services - Strategy, Design, Transition, Operation, Continual 

Service Improvement. 

Standard Care PackageSupport Recommendation that maintains high level of server availability 





PMP and VPM. 


HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network 

HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to 

facilitate proper implementation of network protocols and access to advanced features. 

http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf 




3-Year, HP 24x7 4 hour Response, Collaborative Support for c3000/c7000 enclosure + 3- 

Year, HP 24x7 4 hour Response, Collaborative Support for Blade server 

Offers customers a single point of contact for server problem diagnosis, hardware problem 

resolution, and basic software problem diagnosis, fault isolation, and resolution if available to HP. 

If the problem is with HP HW, the representative will arrive on site any time and day of the year 

to begin hardware maintenance service within 4 hours of the service request being logged. In 

case, the issue is with HP or supported third-party software product and cannot be resolved by 

applying known fixes, HP will contact the third-party vendor and create a problem incident on 

your behalf. 

3-Year , HP 24x7 Software Support for Insight Control 

Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML 

and DL series servers or HP BladeSystem servers. 

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf 

1-Year HP Proactive Select 30 Credit 

Provides a flexible way to purchase HP best-in-class consultancy and technical services. 

http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.pdf 

Additional Services: Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation & 

Start Up and Software Support); Microsoft or Linux or VMware education courses; +60 Proactive 

Select Credits, Factory Express. 

Basic Care Package Delivers minimum recommended support service level 

Insight Remote 

Support 





PMP and VPM. 


3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for c3000/c7000 

enclosure + 3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for Blade 

server 

Provides you with rapid remote support and if required an HP authorized representative who will 

arrive on site any time and day of the year to begin hardware maintenance service within 4 hours 

of the service request being logged. 


3-Year , HP 24x7 Software Support for Insight Control 

Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML 

and DL series servers or HP BladeSystem servers. 


1-Year HP Proactive Select 10 Credit 

Provides a flexible way to purchase HP best-in-class consultancy and technical services. 

http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.pdf 

Additional Services: Startup Blade System c-Cass Enhanced Network Service; Software OS 

(Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up and Software Support); +30 

Proactive Select Credits, Factory Express. 

Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more 

http://www.hp.com/go/insightremotesupport 

HP Support Center Personalized online support portal with access to information, tools and experts to support HP 

business products. Submit support cases online, chat with HP experts, access support resources 

or collaborate with peers. Learn more http://www.hp.com/go/hpsc 

HP's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an 




Warranty / Service 

Coverage 

agent for live support. Now, you can get access to personalized IT support anywhere, anytime. 

HP Insight Remote Support and HP Support Center are available at no additional cost with a HP 

warranty, HP Care Pack or HP contractual support agreement. 

*HP' Support Center Mobile App is subject to local availability. 

For ProLiant servers and storage systems, the services cover HP-branded hardware options 

qualified for the server, purchased at the same time or afterward, internal to the enclosure, as 

well as external monitors up to 22" and tower UPS products; these items will be covered at the 

same service level and for the same coverage period as the server unless the maximum 

supported lifetime and/or the maximum usage limitation has been exceeded. Coverage of the 

UPS battery is not included; standard warranty terms and conditions apply. 

The defective media retention service feature option applies only to Disk or eligible SSD/Flash 

Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or 

SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable 

parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as 

set forth in the manufacturer's operating manual or the technical data sheet are not eligible for 

the defective media retention service feature option. 

For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP 

sales representative or HP Authorized Channel Partner. Or visit: 

www.hp.com/services/bladesystem 



Configuration Information Factory Integrated Models 

For a complete configuration of the HP BladeSystem, please do the following: 

Step 1: Select desired model, configuration and quantity of HP ProLiant server 

and Storage blades 

NOTE: HP BladeSystem c3000 and c7000 enclosures support mixing of G1 through Gen8 server blades in the same 

enclosure 

NOTE: For server blade information, please visit: 


NOTE: For Storage Blade information, please visit: 


Step 2: Determine quantity of HP BladeSystem c-Class Enclosures to purchase 

and choose Required Options (One of the following from each list unless 

otherwise noted): 

NOTE: Each HP BladeSystem c-Class Server Blade Enclosure holds up to 16 half-height blades. Server blanks will be 

shipped in all empty bays. 

Base Server Blade Enclosure Configuration 


BLc7000 c-Class 

Server Blade 

Enclosures 

HP BLc7000 Configure-to-order 3 In LCD ROHS Enclosure 507019-B21 

HP BLc7000 Configure-to-order c-Class Enclosure AD361C 

NOTE: CTO models include 1x BladeSystem Onboard Administrator with KVM, 

4x Active Cool 200 Fans and 0x power supplies. 

NOTE: All c-Class enclosures support HP ProLiant, Integrity and blades in 

either mixed or homogenous configurations. The AD361C enclosure is 

suggested for configurations primarily used with Integrity blades. 

Required Options (one of the following from each category unless otherwise 

noted) 

HP Power Supplies c-Class Power Modules (1 per enclosure) 

HP Single Phase FIO Intelligent Power Module for c-Class BladeSystem 677595-B21 

HP BLc7000 1 PH FIO Power Module Option 413379-B21 

HP BLc7000 3 PH Intl FIO Power Modue Option 413381-B21 

HP BLc7000 3 PH NA/JP FIO Power Module Option 413380-B21 

HP BLc7000 -48V DC Power Input Module AH331A 

c-Class Power Supply (Up to 6) 

HP 6X 2400W Platinum Hot Plug Factory Integrated Power Supply Kit 

NOTE: The bundle includes a quantity of 6 HP 2400W Platinum 94% PSU so a 

full enclosure can be configured with a single part number. 

NOTE: HP BladeSystem Power supplies meet multiple Energy Efficiency 

Initiatives: 2400W, 94%: Climate Savers Computing Initiative PLATINUM and 

ECOS Consulting 80 Plus PLATINUM. 

HP 2400W Platinum Hot Plug Power Supply Kit 




HP 6X 2400W Gold Hot Plug Factory Integrated Power Supply Kit 

NOTE: The bundle includes a quantity of 6 HP 2400W High Efficiency PSU so 

a full enclosure can be configured with a single part number. 

517521-B22 

588603-B21 

517521-B21 

HP 2400W Gold Hot Plug Power Supply Kit 499243-B21 




HP 2250W -48VDC Hot Plug Power Supply Kit 

NOTE: Only compatible with -48V DC Power Input Module. 

NOTE: Mixing of power supplies in the same enclosure is Not SUPPORTED. 

All power supplies must be of the same type. All HP 2400W HE, all HP2250W 

or all -48V DC. 

NOTE: If Three Phase Power Module selected, a minimum of 3 Power Supply 

Option Kits are needed. For full redundancy 6 Power Supply Option Kits are 

required. 

HP Cooling Options c-Class Active Cool Fan (Up to 6) 

6x HP Active Cool 200 Fan Bundle, FIO 

NOTE: The bundle includes a quantity of 6 HP Active Cool 200 Fans so a full 

enclosure can be configured with a single part number. 

AH332A 

517520-B21 

HP BLc7000 Enclosure HP Single Active Cool Fan Option Kit 412140-B21 

NOTE: A minimum of 4 Active Cool 200 Fans is required, 8 Active Cool 200 

Fans can support a full blade enclosure, 10 Active Cool 200 Fans should be 

ordered for reduced power consumption and noise reduction. 

NOTE: Single-Phase models may require additional power supplies. Fans 

should be added to provide redundancy, reduce power consumption and 

reduce noise. 

NOTE: Three-Phase models require a minimum of 6 Active Cool 200 Fans. 

NOTE: Some Blade configurations require 10 fans. 

Step 3: Select optional software bundle (if nothing is selected system will ship 

with 16 Insight Control and Insight Control for Linux Trial Licenses): 

HP Insight Software Enclosure Options 


c-Class Ethernet 

Interconnects 

HP Insight Control for BladeSystem including 1yr 24x7 Support Enclosure 16 

Server FIO License 


Server FIO License 

HP Virtual Connect Flex-10/10D Module for c-Class BladeSystem 

Bottom of Form 

417688-B23 

439034-B23 

638526-B21 

HP VC Flex-10/10D ENT Ed - BLc7000 Opt 662048-B21 

Step 4: Select optional Redundant BladeSystem Onboard Administrator 

Capability 

HP c-Class Enclosure 

Options 

HP BLc7000 Onboard Administrator with KVM Option 

NOTE: With 1 Gb/s Adapters. 

NOTE: The HP c7000 OA supports the mixing with the HP c7000 OA with 

KVM. The HP c7000 OA with KVM must be the active OA to provide the 

Enclosure KVM feature. The KVM menu has an OA CLI button at the bottom, 

which allows an OA administrator to log into the OA and be able to force a 

takeover so the OA with KVM will become the standby OA. The OA Firmware 

Sync feature cannot be used to update mismatched OA modules. Mismatched 

OA firmware versions between the original c7000 OA and c7000 OA with KVM 

require the administrator to use the GUI or CLI to update the OA from a file 

(http, ftp, tftp, local client file using the GUI or USB key containing the OA 

firmware file). 

NOTE: Models of the c7000 enclosure (part numbers 507019-B21 and 

AD361C) come with a BladeSystem Onboard Administrator with KVM as 

standard. Order this part number (456204-B21) when a second redundant 

BladeSystem Onboard Administrator is desired for a c7000 enclosure. 

456204-B21 




Step 5: Select 1 or more interconnect modules for each enclosure 

The following is a list of various HP BladeSystem c-Class interconnect modules (Virtual Connect, Ethernet, Fibre Channel, 

InfiniBand, and SAS interconnects). For detailed interconnect options consult the specific interconnect QuickSpecs: 

http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html 

A pair of interconnects must be ordered if redundancy is required. 

NOTE: Options for specific c-Class interconnects are NOT included in the list below. Consult the individual interconnect 

QuickSpecs to obtain part numbers for interconnect options such as cables, SFPs, etc. 


c-Class Network 

Interconnects 


c-Class SAN 

Interconnects 

HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem 455880-B21 

HP Virtual Connect Flex-10 Ethernet Module with Enterprise Manager License 

NOTE: Includes two HP Virtual Connect Flex-10 10Gb Ethernet modules plus 

one BL-c7000 enclosure license for HP Virtual Connect Enterprise Manager 

software. The license entitlement certificate must be redeemed online or via fax 

to obtain the VCEM license activation key. 

HP Virtual Connect FlexFabric 10/24 Enterprise Edition BLc7000 Option 

NOTE: Includes 2 x HP Virtual Connect FlexFabric 10Gb/24-port modules plus 1 

x VCEM BL-c7000 enclosure license. Customer will receive a printed license 

entitlement certificate and 2 Virtual Connect modules as a single deliverable. 

The license entitlement certificate must be redeemed online or via fax to obtain 

the VCEM license activation key. 

591973-B21 

605865-B21 

HP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem 571956-B21 

HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem 447047-B21 

HP 6125G Ethernet Blade Switch 658247-B21 

HP 6125G/XG Ethernet Blade Switch 658250-B21 


HP 6120XG Blade Switch 516733-B21 

HP 1GB Ethernet Pass-Thru Module for c-Class BladeSystem 406740-B21 

HP 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem 538113-B21 

Cisco Catalyst 1/10GbE 3120X Blade Switch 451439-B21 

Cisco Catalyst 1GbE 3120G Blade Switch 451438-B21 

Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem 410916-B21 

HP GbE2c Layer 2/3 Ethernet Blade Switch 438030-B21 

HP 1:10Gb Ethernet Blade Switch for c-Class BladeSystem 438031-B21 

NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units. 

The above interconnects must be ordered in quantities of two for redundancy 

support. 

HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem 466482-B21 


HP 4GB Fibre Channel Pass-thru Module for c-Class BladeSystem 403626-B21 

HP B-series 8/12c SAN Switch for BladeSystem c-Class AJ820A 


HP B-series 8/24c Power Pack+ SAN Switch for BladeSystem c-Class AJ822A 

HP B-series 8/12c SAN Switch for BladeSystem c-Class 12-port Upgrade LTU T5517A 

HP SAS Switch HP 3Gb 8-port SAS 2.0 BL-c Switch Module for BladeSystem c-Class Enclosure AJ864A 


InfiniBand 

Interconnects 

HP 4X QDR QLogic InfiniBand Switch Module for c-Class BladeSystem 505958-B21 

QLogic InfiniBand 4X QDR Management Module for c-Class BladeSystem 505959-B21 




Interconnects 

HP 4X QDR InfiniBand Switch Module for c-Class BladeSystem 

NOTE: Quad Data Rate (QDR) InfiniBand Switch Modules are only supported in 

the RoHS 6 of 6 compliant enclosures (part numbers starting with 507) and G6 

Blades. 

489184-B21 

HP BLc 4X FDR IB Managed Switch 648311-B21 

HP BLc 4X FDR IB Switch 648312-B21 

Step 6: Select rack power distribution for single-phase models 

NOTE: A pair of PDUs must be ordered for AC Feed redundancy. 

HP Power Distribution 

Units 

HP Monitored Power Distribution Unit: Half Rack Version 

HP 17.3kVA 48A Single Input Three Phase NA/JP Monitored Power Distribution 

Unit 

HP 7.3kVA 32A Single Input Three Phase INTL Intelligent Modular Power 

Distribution Unit 

HP 22kVA 32A Single Input Three Phase INTL Monitored Power Distribution 

Unit 

NOTE: Please see the QuickSpecs for Technical Specifications and additional 

information: 


(Worldwide) 

HP Modular Power Distribution Units 

AF916A 

AF536A 

AF917A 

HP 17.3kVA 48A Three Phase NA/JP Modular Power Distribution Unit AF511A 

HP 22kVA 32A Three Phase INTL Core Modular Power Distribution Unit AF518A 

HP 8.6kVA 24A Three Phase NA/JP Modular Power Distribution Unit AF512A 

HP 11kVA 16A Three Phase INTL Modular Power Distribution Unit AF513A 

HP 8.3kVA 40A High Voltage NA/JP Core Modular Power Distribution Unit 252663-D75 

HP 9.2kVA 40A High Voltage INTL Core Modular Power Distribution Unit 252663-B34 

HP 7.3kVA 32A High Voltage INTL Core Modular Power Distribution Unit 252663-B33 

HP 4.9kVA 24A High Voltage NA/JP Core Modular Power Distribution Unit 252663-D74 


information: 


(Worldwide) 

NOTE: The Core Only Modular Power Distribution Unit Kits excludes the 

extension bars as they are not required with the HP BladeSystem 

HP Two C13 PDU Extension Bar AF500A 

NOTE: Each extension bar has a C19 input and 7 C13 receptacles. The option 

is ideal for model S348, and, model S332, which both have only C19 outlets 

(12) and for all Core Only Modular PDUs. 

Step 7: Select optional Power Cords for Single Phase Model (country specific 

power cords are listed under options) 

NOTE: Default power cord is a 6ft IEC C19 - C20 cord 




HP Intelligent Power 

Distribution Units 

Power cords 

(HP C19 to C20) 

NOTE: Order with P/N 

677595-B21 

HP Power Distribution 

Units Power cords 

(HP C19 to C20) 

HP C19-C20 6.5ft SGL Data Special TK738 

HP C19-C20 6.5ft 3PC Data Special TK739 







HP C19 - C20 WW 250V 16Amp Flint Gray 1.20m Jumper Cord AF575A 


HP C19 - C20 WW 250V 16Amp 2.5m Jumper Cord 295633-B22 

HP 4.5M Power Cord with C19/C20 Plug E7804A 



Related Options 


c-Class Server Blade 

Enclosures 

HP BLc7000 Enclosure with 1 Phase 6 Power Supply 10 Fan ROHS Full IC 

License 


License 


License 

HP BLc7000 Enclosure with 1 Phase 2 Power Supply 4 Fan ROHS Trial IC 

License 

NOTE: All c7000 BTO enclosures will ship with 15 server blanks. CTO 

enclosures will ship with the required number of server blanks. 

NOTE: New models of the c7000 enclosure (part numbers 5070xx-B21) come 

as standard with the HP 2400W HE PSU and BladeSystem Onboard 

Administrator with KVM. 

HP Enclosure Options HP BLc7000 Onboard Administrator with KVM Option 

NOTE: The HP c7000 OA supports the mixing with the HP c7000 OA with KVM. 

The HP c7000 OA with KVM must be the active OA to provide the Enclosure 

KVM feature. The KVM menu has an OA CLI button at the bottom, which allows 

an OA administrator to log into the OA and be able to force a takeover so the OA 

with KVM will become the standby OA. The OA Firmware Sync feature cannot 

be used to update mismatched OA modules. Mismatched OA firmware versions 

between the original c7000 OA and c7000 OA with KVM require the 

administrator to use the GUI or CLI to update the OA from a file (http, ftp, tftp, 

local client file using the GUI or USB key containing the OA firmware file). 

NOTE: Models of the c7000 enclosure (P/Ns 507019-B21: 507015-B21, 507017- 

B21, 507016-B21, 507014-B21) come with a BladeSystem Onboard 

Administrator with KVM as standard. Order (P/N 456204-B21) when a second 

redundant BladeSystem Onboard Administrator is desired for a c7000 enclosure. 

HP BLc7000 10000 Series Rack Shipping Bracket Option 

NOTE: The shipping bracket is required when shipping a c7000 enclosure when 

installed in a rack. It is not required for normal operation. 

HP BLc7000 Miscellaneous Blanks Option Kit 

NOTE: This kit should only be ordered to replace lost or damaged blanks. 

HP BLc7000 Server Blank w/Coupler Option 

NOTE: The coupler allows half-height server blanks to be coupled together to 

create a full-height server blank. 

NOTE: This kit should only be ordered to replace lost or damaged blanks. 

HP Power Supplies HP 2400W Platinum Hot Plug Power Supply Kit 




HP 2400W Gold Hot Plug Power Supply Kit 

NOTE: Supplied with 2m/6ft IEC C20 - C19 jumper cord. 


Initiatives: 2400W, 92%: Climate Savers Computing Initiative GOLD and ECOS 

Consulting 80 Plus GOLD. 

507015-B21 

507017-B21 

507016-B21 

507014-B21 

456204-B21 

433718-B21 

412148-B21 

412150-B21 

588603-B21 

499243-B21 

HP 2250W -48VDC Hot Plug Power Supply Kit AH332A 

HP BLc7000 -48V DC Power Input Module AH331A 

NOTE: Mixing of power supplies in the same enclosure is not supported. All 

power supplies must be of the same type, all HP 2400W HE, all HP2250W or all 

-48V DC. 

NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the 

computer industry, and consumers in an effort to bring energy efficient 




technology solutions to the marketplace. 80 Plus independently tests power 

supply efficiency and publically posts the results on 80Plus.org." 

HP Cooling Options HP c-Class Active Cool Fan 


c-Class Network 

Interconnects 


c-Class SAN 

Interconnects 

HP BLc7000 Enclosure HP Single Active Cool Fan Option Kit 

NOTE: A minimum 4 Active Cool 200 Fans is required, 8 Active Cool 200 Fans 

can support a full blade enclosure, 10 Active Cool 200 Fans should be ordered 

for reduced power consumption and noise reduction. Some Blade configurations 

require 10 fans. 

412140-B21 

HP Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem 455880-B21 

HP Virtual Connect Flex-10 Ethernet Module with Enterprise Manager License 

NOTE: Includes 2 x HP Virtual Connect Flex-10 10Gb Ethernet modules plus 1 x 

VCEM BL-c7000 enclosure license. Customer will receive a printed license 



the VCEM license activation key 

NOTE: For additional license kits, please visit: 


(Worldwide) 

HP Virtual Connect FlexFabric 10/24 Enterprise Edition BLc7000 Option 

NOTE: Includes 2 x HP Virtual Connect FlexFabric 10Gb/24-port modules plus 1 

x VCEM BL-c7000 enclosure license. Customer will receive a printed license 



the VCEM license activation key. 

591973-B21 

605865-B21 

HP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem 571956-B21 

HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem 447047-B21 

HP 6125G Ethernet Blade Switch 658247-B21 



HP 6120XG Blade Switch 516733-B21 

HP 1GB Ethernet Pass-Thru Module for c-Class BladeSystem 406740-B21 

HP 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem 538113-B21 

Cisco Catalyst 1/10GbE 3120X Blade Switch 451439-B21 

Cisco Catalyst 1GbE 3120G Blade Switch 451438-B21 

Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem 410916-B21 

HP GbE2c Layer 2/3 Ethernet Blade Switch 438030-B21 

HP 1:10Gb Ethernet Blade Switch for c-Class BladeSystem 438031-B21 

NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units. 

The above interconnects must be ordered in quantities of two for redundancy 

support. 



HP 4GB Fibre Channel Pass-thru Module for c-Class BladeSystem 403626-B21 



HP B-series 8/24c Power Pack+ SAN Switch for BladeSystem c-Class AJ822A 

HP SAS Switch HP 3Gb 8-port SAS 2.0 BL-c Switch Module for BladeSystem c-Class Enclosure AJ864A 

HP 6Gb SAS BL Switch Single Pack BK763A 

HP 6Gb SAS BL Switch Dual Pack BK764A 





InfiniBand 

Interconnects 


information at: 


(Worldwide) 

HP 4X QDR QLogic InfiniBand Switch Module for c-Class BladeSystem 505958-B21 

QLogic InfiniBand 4X QDR Management Module for c-Class BladeSystem 505959-B21 

HP 4X QDR InfiniBand Switch Module for c-Class BladeSystem 

NOTE: Quad Data Rate (QDR) InfiniBand Switch Modules are only supported in 

the RoHS 6 of 6 compliant enclosures and G6 Blades. 

489184-B21 

HP BLc 4X FDR IB Managed Switch 648311-B21 

HP BLc 4X FDR IB Switch 648312-B21 

HP Optical Drives HP Integrity USB External DVD/RW Drive AT120A 

HP Insight Software Insight Control 


Server Electronic License 


Server Electronic License 

HP Insight Management Media Kit 

NOTE: HP Insight Management Media Kit contains DVDs without licenses. 

Contains HP Systems Insight Manager, HP Insight Control, HP Matrix Operating 

Environment, and Virtual Connect Enterprise Manager software. Uses an 

integrated installer to perform quick and accurate software installation and 

updates. 

NOTE: Licenses ship without media. The Insight Management Media Kit can be 

ordered separately, or can be downloaded at: 

http://www.hp.com/go/insightupdates. 

NOTE: The "for bundling with an enclosure" license kits can only be ordered 

together with a BladeSystem c3000 or c7000 enclosure on the same order. 

NOTE: Customer will receive a license entitlement certificate, which must be 

redeemed online or via fax in order to obtain the license activation key(s). 

Includes one year of 24 x 7 HP Software Technical Support Service. 

NOTE: For additional license kits, please see the QuickSpecs at: 


(Worldwide) 

HP Insight Control for Linux 

HP Insight Control for Linux including 1yr 24x7 Support Enclosure 8 Server FIO 

License 

HP Insight Control for Linux w/1yr 24x7 Supp Enclosure Bundle Electronic 8 Svr 

LTU 

HP Insight Control for Linux including 1yr 24x7 Support Enclosure 16 Server FIO 

License 

HP Insight Control for Linux w/1yr 24x7 Supp Enclosure Bundle Electronic 16 

Svr LTU 

NOTE: Licenses ship without media. The Media pack for Insight Control for 

Linux can be ordered separately, or can be downloaded at: 

http://www.hp.com/go/ic-linux (click on Download button). 

NOTE: Customer will receive a license entitlement certificate, which must be 

redeemed online or via fax in order to obtain the license activation key(s). 

Includes one year of 24 x 7 HP Software Technical Support Service. 

NOTE: For additional license kits, please see the QuickSpecs at: 


(Worldwide) 

TC276AAE 

TC277AAE 

436222-B21 

TC211A 

TC211AAE 

TC212A 

TC212AAE 




HP Virtual Connect 

Enterprise Manager 

HP c-Class Storage 

Blades 

HP Virtual Connect Enterprise Manager including 1yr 24x7 Support Single c7000 

Enclosure Lic 

NOTE: This license allows 1 BL-c7000 enclosure to be managed with VCEM. 

Customer will receive a printed license entitlement certificate via physical 

shipment. The license entitlement certificate must be redeemed online or via fax 

to obtain the license activation key(s). Includes one year of 24 x 7 HP Software 

Technical Support and Update Service. 



(Worldwide) 

HP LTO-5 SB3000c Tape Blade 


information at: 


(Worldwide) 

459864-B21 

BS580B 

HP BL c-Class SB40c PCI Express Mezzanine Pass Thru Option Kit 431643-B21 

NOTE: The mezzanine card is needed to support the SB40c storage blade (P/N 

411243-B21) with HP c-Class BladeSystem full-height server blades. 

HP SB40c Storage Blade with (4) 300GB Drive Bundle AP762A 

NOTE: Includes the SB40c Storage Blade and a single LeftHand P4000 VSA 

license. LeftHand VSA software is installed in a virtual machine on a VMware 

ESX host server adjacent to the SB40c. 

NOTE: Includes 1 yr 9x5 software support for LeftHand P4000 VSA software. 

NOTE: LeftHand P4000 VSA is supported on VMware ESX 3.0.2, 3.5 and ESX i 

version 3.5 

For detailed deployment information, see the HP LeftHand P4000 VSA in an HP 

BladeSystem environment solution guide: 

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01729139/ 

c01729139.pdf 



(Worldwide) 

HP Expansion Blades HP BLc PCI Expansion Blade 448018-B21 


information: 


(Worldwide) 


NOTE: The mezzanine card is needed to support the PCI Expansion Blade (P/N 

448018-B21) with HP c-Class BladeSystem full-height server blades. 




HP Ultrium Tape 

Blades 

HP LTO-4 SB1760c Tape Blade AQ697B 


NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem 

(431643-B21) is required when installing a tape blade adjacent to a full-height 

server blade 


information: 


(Worldwide) 

HP Power Cords HP LV Power Cords100 - 120V AC 

HP C19 - Nema 5-15 US/CA 125V 15Amp 3.6m Power Cord 235603-001 

HP C19 - JIS C8303 JP 100V 12Amp 3.6m Power Cord 391222-291 

HP C19 - Nema 5-20P US/CA 125V 20Amp 4.5m Power Cord E7802A 

HP C19 - C20 Jumper Cords 



HP C19 - C20 WW 250V 16Amp 2.5m Jumper Cord 295633-B22 

HP C19 - C20 WW 250V 16Amp 4.5m Jumper Cord E7804A 

HP HV Power Cords 200 - 240V AC 

HP C19 -Nema L6-30P US/CA 250V 16Amp 4.5m Power Cord E7805A 

HP C19 - Nema L6-20P NA/JP 250V 20Amp High Voltage 3.6m Power Cord AF593A 

HP C19 - NBR-14136 BR 250V 16Amp 2.5m Power Cord AF592A 

HP C19 - BS-1363/A UK/HK/SG 250V 13Amp 3.6m Power Cord 359615-031 

HP C19 - CEE-VII EU 250V 16Amp 3.6m Power Cord AF576A 

HP C19 - AS3112-3 AU/NZ 250V 15Amp 3.6m Power Cord AF577A 

HP C19 - SABS-164 ZA 250V 16Amp 3.6m Power Cord AF579A 

HP C19 - CEI-23-50 IT/CL 250V 16Amp 3.6m Power Cord AF580A 

HP C19 - IEC-309 DK/SE/AR 250V 16Amp 3.6m Power Cord AF581A 

HP C19 - IS-1293 IN/PK/BD 250V 16Amp 2.5m Power Cord AF582A 

HP C19 - ISI-32 IL 250V 16Amp 2.5m Power Cord AF583A 

HP C19 - GB-1002 CN 250V 16Amp 2.5m Power Cord AF584A 

HP C19 - CNS-690 TW 250V 16Amp 2.5m Power Cord AF585A 

HP 240 VAC 4.5M Unterminated End NA Power Cord E7806A 

NOTE: For additional power cable information, please visit: 

http://h18000.www1.hp.com/products/servers/proliantstorage/powerprotection/options/power-cable.html 




HP Uninterruptible 

Power Systems 

HP Rack-mountable UPS 

R5000 Uninterruptible Power System (UPS) 

HP R5KVA 3U IEC309-32A High Voltage INTL Uninterruptible Power System AF461A 

HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System AF460A 

NOTE: Please see the QuickSpecs for additional information: 


(Worldwide) 

R7000 Uninterruptible Power System (UPS) 

HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System AF462A 

HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System AF463A 



(Worldwide) 

HP Rack-mountable R8000/R12000 UPS 

HP R8000/3 8000kVA Three Phase NA 6U Rackmount Uninterruptible Power 

System 

HP R8000/3 8000kVA Three Phase INTL 6U Rackmount Uninterruptible Power 

System 

HP R12000/3 12000VA Three Phase NA 6U Rackmount Uninterruptible Power 

System 

HP R12000/3 12000VA Three Phase INTL 6U Rackmount Uninterruptible 

Power System 



(Worldwide) 

NOTE: For additional information on sizing your server, please reference: 

http://www.upssizer.com 

HP Rack Series HP Rack 10000 G2 Series (Graphite Metallic) 

NOTE: HP BladeSystem c7000 Enclosure is not supported in a 14U rack 


information: 


(Worldwide) 

NOTE: For additional information regarding Rack Cabinets, please see the 

following URL: http://www.hp.com/go/rackandpower 

AF431A 

AF432A 

AF429A 

AF430A 




HP Rack Options Keyboards and Monitors 

HP USB BFR with PVC Free US Keyboard/Mouse Kit 631341-B21 

HP USB BFR with PVC Free UK Keyboard/Mouse Kit 631344-B21 

HP USB BFR with PVC Free FR Keyboard/Mouse Kit 631346-B21 

HP USB BFR with PVC Free ES Keyboard/Mouse Kit 631348-B21 

HP USB BFR with PVC Free DE Keyboard/Mouse Kit 631358-B21 

HP USB BFR with PVC Free JP Keyboard/Mouse Kit 631360-B21 

HP USB BFR with PVC Free IT Keyboard/Mouse Kit 631362-B21 

HP USB BFR with PVC Free CN Keyboard/Mouse Kit 631364-B21 

HP USB BFR with PVC Free AE Keyboard/Mouse Kit 638212-B21 

HP USB BFR with PVC Free RU Keyboard/Mouse Kit 638214-B21 


information: 


(Worldwide) 

HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor AZ870A 

HP TFT7600 G2 KVM Console Rackmount Keyboard UK Monitor AZ871A 

HP TFT7600 G2 KVM Console Rackmount Keyboard DE Monitor AZ872A 

HP TFT7600 G2 KVM Console Rackmount Keyboard FR Monitor AZ873A 

HP TFT7600 G2 KVM Console Rackmount Keyboard IT Monitor AZ874A 

HP TFT7600 G2 KVM Console Rackmount Keyboard ES Monitor AZ875A 

HP TFT7600 G2 KVM Console Rackmount Keyboard DK Monitor AZ876A 

HP TFT7600 G2 KVM Console Rackmount Keyboard NO Monitor AZ877A 

HP TFT7600 G2 KVM Console Rackmount Keyboard SE/FI Monitor AZ878A 

HP TFT7600 G2 KVM Console Rackmount Keyboard CH Monitor AZ879A 

HP TFT7600 G2 KVM Console Rackmount Keyboard PT Monitor AZ880A 

HP TFT7600 G2 KVM Console Rackmount Keyboard BE Monitor AZ881A 

HP TFT7600 G2 KVM Console Rackmount Keyboard JP Monitor AZ882A 

HP TFT7600 G2 KVM Console Rackmount Keyboard RU Monitor AZ883A 

HP TFT7600 G2 KVM Console Rackmount Keyboard Intl Monitor AZ884A 

HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor AZ885A 


information: 


(Worldwide) 

NOTE: For additional information regarding Rack Options, please see the 

following URL: http://www.hp.com/go/rackandpower 




HP KVM Switches 

HP Server Console 0x2x8 Port Analog Switch AF616A 

HP Server Console 0x2x16 Port Analog Switch AF617A 


information: 


(Worldwide) 

NOTE: Cat5e cables are required to connect Interface Adapters to Consoles 

Switches. Cat52 cables can be found at the following URL: 

http://www.hp.com/go/kvm 

NOTE For additional information regarding KVM switches, Serial Console 

servers, rack mount monitors, keyboards and all related options please see the 

following URL: http://www.hp.com/go/kvm 

Rack Options 

HP Universal 10636 G2 Front Door AF019A 

HP 10642 G2 Side Panel AF054A 

HP 10636 G2 Side Panel AF056A 

HP 36U Rack Rear Extension Kit AF060A 

HP 10K G2 600W Graphite Stabilizer Kit AF062A 

HP 10K G2 600W Heavy Duty Graphite Stabilizer Kit AF064A 

HP 10000 G2 Series Rack Grounding Kit AF074A 

HP 600W 10K G2 Rack Tie Down Kit AF076A 

NOTE: For additional information regarding Rack Options, please see the 

following URL: www.racksolutions.com/hp. 

HP Airflow Optimization 

HP 10000 Series Rack Airflow Optimization Kit AF090A 

NOTE: The Airflow Optimization kit is designed to prevent hot and cold air from 

mixing thus optimizing the temperature at which the chilled air enters the racked 

servers. 

NOTE: When configuring racks through Factory Express, a Rack Optimization 

kit will automatically ship with the rack. This kit is recommended for all other rack 

configurations also. 

HP Tape Backup The following options are supported in an Enterprise Backup Solution (EBS) 

environment with the HP BladeSystem c-Class enclosure. Please visit: 

http://www.hp.com/go/ebs for complete compatibility details. 

HP MSL2024 Tape Library 

HP MSL2024 1 LTO-4 Ultrium 1840 Tape Library AJ033A 

HP MSL2024 1 LTO-4 Ultrium 1840 Fibre Channel Tape Library AJ034A 

HP MSL2024 1 Ultrium 920 Drive Tape Library AH169A 

HP MSL4048 Tape Library 

HP MSL4048 2 LTO-4 Ultrium 1840 Tape Library AJ037A 



HP MSL4048 1 Ultrium 920 Drive Tape Library AH171A 


information or to create a complete solution; reference current compatibility 

information at: http://www.hp.com/go/ebs. 




HP Care Pack Services NOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure, 

power supplies and fans. HP qualified rack options are covered by these 

services when installed within the same rack. HP supported c-Class enclosure 

devices including pass thru, Ethernet interconnect and virtual connect modules 

are also covered by the c7000 enclosure Care Pack services. 

NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered 

under the c7000 enclosure Care Packs, SAN/Fabric switches carry separate 

Care Packs. SAN/Fabric Switch Care Pack service level support should always 

be uplifted to match existing storage or server service level. 

Hardware Services On-site Service 

HP 3 year Next business day c7000 Enclosure Hardware Support 

NOTE: Uplifts the Ethernet devices to the same level of service as the c-class 

enclosure 

UE477E 

HP 3 year 4 hour 13x5 c7000 Enclosure Hardware Support UE478E 

HP 3 year 4 hour 24x7 c7000 Enclosure Hardware Support UE479E 

HP 3 year 6 hour 24x7 Call to Repair c7000 Enclosure Hardware Support UE480E 

Support Plus 24 

HP 3 year Support Plus 24 Insight Control for Linux BladeSystem c7000 Service UK137E 

HP 3 year Support Plus 24 Insight Control BladeSystem c7000 Service UH322E 

Installation & Start-up Services 

HP Startup Blade System c-Class Infrastructure Service UE602E 

HP Startup Blade System c-Class Enhanced Network Service UE603E 

HP Install c-Class Enclosure & ServerBlade Service UE494E 

HP Install c-Class Server Blade Service UE493E 

NOTE: For more information, customer/resellers can contact: 

http://www.hp.com/services/bladesystemservices 

NOTE: The HP Care Pack service part numbers below covers the HP Brocade 

4Gb, 12 Port SAN Switch and Brocade 4/24/ SAN Switch. 


HP 3 Years Next business day c-Class SAN Switch Hardware Support UE436E 

HP 3 Years 4 hour 13x5 c-Class SAN Switch Hardware Support UE437E 

HP 3 Years 4 Hour 24 hours days 1-7 c-Class SAN Switch Hardware Support UE438E 

HP 3 Years 6 Hour 24x7 Call-To-Repair c-Class SAN Switch Hardware Support UE439E 

HP Installation Storage Switches Service U5988E 

NOTE: The HP Care Pack service part numbers below covers the Brocade 4/24 

SAN Switch Power Pack. 


Support Plus 

HP 3 year Support Plus 4/24 SAN Switch Power Pack Service UE728E 


HP 3 year Support Plus 24 4/24 Switch Power Pack Service UE729E 

NOTE: The HP Care Pack service part numbers below covers the HP Cisco 

MDS 9124e 12 port and 24 port Fabric Switch. 


HP 3 year Next business day MDS 9124e Switch Hardware Support UF313E 

HP 3 year 4 hour 13x5 MDS 9124e Switch Hardware Support UF972E 



HP Installation Storage Switches Service U5988E 




Software Installation and StartUp Services 

HP Installation and Startup for Insight Control Server Deployment - previously 

Rapid Deployment Pack 

NOTE: Provides installation on a Customer supplied server designated as a 

Deployment Server. Includes the deployment of a single server. This new server 

will be deployed using either one of the pre-configured scripts or an image. In 

addition, the service will provide for the capture and storage of the configuration 

of the newly deployed server and orientation on product usage. To be delivered 

during standard office ours, standard office days. 

U5683E 

HP Startup HP Systems Insight Manager Service UA041E 

HP Installation and Startup for Insight Control for Linux UF372E 

Software Operating Environment Care Packs 

HP 1 year 24x7 10 incidents Microsoft/Novell Software Technical Support U9269E 

HP 1 year 24x7 10 incidents SuSE IA32 Software Technical Support U9936E 


www.hp.com/services/servers 

BCS Flexible Care Packs Integrity blade server enclosure 

NOTE: HP Care Pack services for the c7000 Enclosure cover the enclosure, 

power supplies and fans. HP qualified rack options are covered by these 

services when installed within the same rack. HP supported c-Class enclosure 

devices including pass thru, Ethernet interconnect and virtual connect modules 

are also covered by the c7000 enclosure Care Pack services. 

NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered 

under the c7000 enclosure Care Packs, SAN/Fabric switches carry separate 

Care Packs. SAN/Fabric Switch Care Pack service level support should always 

be uplifted to match existing storage or server service level. 


Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, 

Electronic 


enclosure. 

HA101A3#6Q6 

4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic HA103A3#6Q6 

4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic HA104A3#6Q6 

6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, 

Electronic 

Support Plus 

HA105A3#6Q6 

Support Plus Service, 5-Day x 13-Hour Coverage HA109A3#6Q6 


Support Plus 24 Service HA110A3#6Q6 

Proactive 24 Service - Mission Critical proactive environment 24x7 4hr onsite 

HW support 

Critical Service - Mission Critical proactive environment 6-Hour Call-to-Repair 

onsite HW support 

Installation & Start-up Services 

HP BladeSystem c7000 Infrastructure Installation and Startup Service for Blade 

Hardware and Insight Control Software, Electronic 

NOTE: The HP Care Pack service part numbers below covers the HP Brocade 

4Gb, 12 Port SAN Switch and Brocade 4/24 SAN Switch. 



Electronic 

HA111A3#6Q6 

HA112A3#6Q6 

HA114A1#57A 

HA101A3#85J 




4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic HA103A3#85J 

4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic HA104A3#85J 


Electronic 

HA105A3#85J 

Hardware Installation, Electronic HA113A1#5D2 

NOTE: The HP Care Pack service part numbers below covers the Brocade 4/24 

SAN Switch Power Pack. 


Support Plus 

Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite, 

onsite at HP's discretion, 8am-9pm, M-F 2hr response time excluding HP 

holidays, Electronic 


Onsite HW support 24x7, 4hr response and SW Tech support offsite, onsite at 

HP's discretion, 24x7 2hr response time including HP holidays, Electronic 

NOTE: The HP Care Pack service part numbers below covers the HP Cisco 

MDS 9124e 12 port and 24 port Fabric Switch. 



Electronic 


enclosure. 

HA109A3#85K 

HA110A3#85K 

HA101A3#87L 

4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic HA103A3#87L 

4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic HA104A3#87L 


Electronic 

HA105A3#87L 

Hardware Installation, Electronic HA113A1#5D2 


www.hp.com/services/servers 



Storage 

Figure 1 Installing a tape blade adjacent to a half-height Figure 2 Installing a tape blade adjacent to a full-height 

server blade. 

server blade. 

Installing Tape or Storage Blade 

Description Quantity 

Supported 

Connecting a tape or 

storage blade to an 

adjacent half-height 

server blade (Figure 1) 

Connecting a tape or 

storage blade to an 

adjacent full-height 

server blade (Figure 2) 

Up to 8 per HP 

BladeSystem c- 

Class c7000 

Enclosure 

Position 

Supported 

Odd or Even 

slots next to 

partner server 

blade 

Up to 4 per HP Slots 10, 12, 14, 

BladeSystem c- or 16 

Class c7000 


(lower bays only) 

Comments 

A tape or storage blade supports one partner server 

blade, and one partner server blade supports one tape 

or storage blade. 

Identify the partner server blade to be installed with the 

tape or storage. The two blades always occupy a pair of 

slots, as follows: 1 & 2, 3 & 4, 5 & 6, 7 & 8, 9 & 10, 11 & 

12, 13 & 14, 15 & 16. 

If the partner server blade is installed in an oddnumbered 

bay, the tape or storage blade is installed in 

the adjacent even-numbered bay to the right. 

If the partner server blade is installed in an evennumbered 

bay, the tape or storage blade is installed in 

the adjacent odd-numbered bay to the left. 

A tape or storage blade supports one partner server 

blade, and one partner server blade supports one tape 

or storage blade. 

When partnering a tape or storage blade with a full 

height server blade, an HP PCI Express Mezzanine 

Pass-Thru Card for BladeSystem c-Class (431643-B21) 

is required. This card is installed in mezzanine 3 

connector in the server blade. 

Identify the partner server blade to be installed with the 

tape or storage blade. The two blades always occupy a 

pair of slots, as follows: 9 & 10, 11 & 12, 13 & 14, 15 & 

16. 

The partner server blade is installed in an odd-numbered 

bay. The tape or storage blade is installed in the 

adjacent even-numbered bay to the right. 



Storage 

The tape or storage blade is always located on the lower 

row of the enclosure in an even-numbered bay (slots 10, 

12, 14 or 16) 



Power Specifications 

HP BLc7000 Enclosure 2400 Watts Platinum Efficiency Power Supply 

Part Number 588603-B21 

Input Voltage Range (Vrms) 200-240 

Frequency Range (Nominal) (Hz) 50 / 60 

Nominal Input Voltage (Vrms) 200 208 220 230 240 

Maximum Rated Output Wattage 2450 2450 2450 2450 2450 

Nominal Input Current (A rms) 13.9 13.4 12.6 12.0 11.4 

Maximum Rated Input Wattage 

Rating (Watts) 

2692 2692 2678 2678 2663 

Maximum Rated VA (Volt-Amp) 2778 2778 2762 2762 2747 

Efficiency (%) at Max. Rated Output 

Wattage 

91 91 91.5 91.5 92 

Power Factor 0.98 0.98 0.98 0.98 0.98 

Leakage Current (mA) 0.97 1.01 1.06 1.11 1.16 

Maximum Inrush Current (A peak) 100 100 100 100 100 

Maximum Inrush Current duration 

(mS) 

Maximum British Thermal Unit 

Rating (BTU-Hr) 

10 10 10 10 10 

9186 9186 9136 9136 9086 

NOTE: 

To review maximum system power ratings for facilities planning purposes use the Active Answers Power Calculator which is 

available via the online tool located at URL: http://www.hp.com/go/bladesystem/powercalculator 



Technical Specifications 

Server Blade and Fan Population Guidelines 

Fan bay numbering 

Fans must be placed in the following bays 

Number of Fans Fan Bays Used 

4 4, 5, 9, 10 

6 3, 4, 5, 8, 9, 10 

8 1, 2, 4, 5, 6, 7, 9, 10 

10 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 

NOTE: For correct operation fans and server blades must be installed in the correct bays. The BladeSystem Onboard 

Administrator will ensure that fans and blades are correctly placed before allowing systems to power on. 

Half-height server blade bay numbering 

1. Device Bay 1 9. Device Bay 9 











NOTE: Half-height servers should be populated from top and bottom from left to right from the front of the enclosure. So 

the first two half-height servers would be placed in bays 1 & 9 the second two half-height servers would be placed in bays 

2 & 10 and so on until the enclosure is full. 

Full-height server blade bay numbering 





NOTE: Full-height servers should be populated from left to right. 

Mixed Configuration - Full Height and Half-Height Population rules 




The c7000 enclosure is divided into 4 quadrants by the vertical support metalwork. Within each quadrant a removable 

divider is used to support half height devices. To install a full-height blade in any quadrant this divider must be removed. 

As a consequence a quadrant can only contain either full-height server blades or half-height server blades. 

NOTE: Storage blades and Tape blades can be installed in the same quadrant as both full-height and half-height blades, a 

bracket ships with each SB40c/Tape Blade that allows a half-height blade to be mounted on top of the storage blade. 

NOTE: The lower tape or storage blade cannot be removed without first removing the upper half height blade. 


c7000 Server Blade 


Dimensions Height 17.4 in (442 mm) 

Width 17.6 in (447.04 mm) 

Depth 32 in (813 mm) 

Shipping Dimensions Height 29.88 in (759 mm) 

Single Phase 

Enclosure Weight 

Three -Phase 

Enclosure NA/JPN 

Weight 

Width 23.88 in (607 mm) 

Depth 39.88 in (1013 mm) 

Unboxed 192 lb (87 kg) 

Shipping 235 lb (106.6 kg) 

Unboxed 222 lb (100.7 kg) 


Three-Phase Enclosure Unboxed 222 lb (100.7 kg) 

International Weight Shipping 265 lb (120.2 kg) 

DC Input Enclosure 

Weight 

Max Enclosure Weight 

(approximate) 

Power Input Requirements - 

Single Phase Model 

Unboxed 151 lb (68.5 kg) 

Shipping 194 lb (88 kg) 

Unboxed 450 lb (204 kg) 


Temperature Range Operating 50° to 95° F (10° to 35° C) 

Non-Operating -22° to 140° F (-30° to 60° C) 

Relative Humidity Operating 10 to 90% relative humidity (Rh), 28°C 

(82.4°F) maximum wet bulb temperature, noncondensing. 

Non-Operating 5 to 95% relative humidity (Rh), 38.7°C 

(101.7°F)maximum wet bulb temperature, 

non-condensing. 

NOTE: Operating temperature has an altitude derating of 1.8° F (1° C) per 1,000 ft (304.8 m). No 

direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper nonoperating 

limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is 

based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa. 

Input Requirements - 

Three Phase NA/JPN 

Model 

Rated input frequency 50 to 60 Hz 

2400W PSU Rated input voltage 200 to 240 VAC 

Rated input current 

per power supply 

Rated input power 

per power supply 

Rated input voltage 200 to 208 VAC Line to Line 

3-Phase Delta 


13.9 A at 200 VAC 

13.3 A at 208 VAC 

12.6 A at 220 VAC 

2780 VA 




Input Requirements - 

Three Phase 

International Model 

Input Requirements 

DC Power 

2250W PSU Max input current per 

line cord 

Max input power 

per line cord 


line cord 


per line cord 

22.6A at 200 VAC 

21.8A at 208 VAC 

7836VA Max 

24A at 200 VAC 

23.1A at 208 VAC 

8340 VA Max 

Rated input voltage 346 VAC to 415 VAC Line to Line 

200 VAC to 240 VAC Line to Neutral 

3-Phase WYE 



line cord 


per line cord 


line cord 


per line cord 

Rated Input Voltage 36 to -72 VDC 

Max Input Current per 

line cord 

Max Input Power per 

line Cord 

75A 

2700W 

Power Cords Single Phase IEC-320 C19-C20 1.22m (6 ft) 

Output 

Specifications 

(per power supply) 

11.9 A at 220 VAC 

10.9 A at 240VAC 

7836 VA Max 

12.6 A at 220 VAC 

11.5 A at 240VAC 

8340 VA Max 

3-Phase NA/JPN 2 x NEMA L15-30p 3.048m (10 ft) 

3-Phase International 2 x IEC-309 200/346 V - 240/415 V, 5-Pin, 6h 

16A 3.048m (10 ft) 

-48V DC Power Terminal lug: 45DG 4AWG 1/4 2H 

HP 2400W High 

Efficiency Hot-Plug 

Power Supply 

HP 2250W -48V DC 

Hot-Plug Power Supply 

Two-hole lug 

45 degree bend 

0.25in. (6.4mm) stud hole size 

0.63in. (16mm) hole spacing 

200 - 240 VAC 2400 W 92% Efficiency 

2250W 

Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and 

declared average bystander position A-Weighted sound pressure 

levels (LpAm) when the product is operating in a 23°C ambient 

environment. Noise emissions were measured in accordance with ISO 

7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 

109). 

Idle 

LWAd 7.1 Bels 

LpAm 54 dBA 

Operating 

LWAd 7.2 Bels 




Option Kits Power Supply Option 

Shipping Dimensions 

Environmental-friendly 

Products and 

Approach 

Fan Option Shipping 

Dimensions 

BladeSystem Onboard 

Administrator Option 

Shipping Dimensions 

End-of-life 

Management and 

Recycling 

© Copyright 2012 Hewlett-Packard Development Company, L.P. 

LpAm 54 dBA 

The information contained herein is subject to change without notice. 

Height 8.75 in (223 mm) 

Width 8.63 in (219 mm) 

Depth 35.13 in (892 mm) 

Weight 8.5 lbs (3.85 kg) 

Height 8.75 in (223 mm) 

Width 9.75 in (248 mm) 

Depth 15.88 in (403 mm) 


Height 2.50 in (63.5 mm) 

Width 9.88 in (251 mm) 

Depth 13.50 in (343 mm) 


Hewlett-Packard offers end-of-life HP product return, trade-in, and 

recycling programs in many geographic areas. For trade-in information, 

please go to http://www.hp.com/go/green. To recycle your product, 

please go to: http://www.hp.com/go/green or contact your nearest HP 

sales office. Products returned to HP will be recycled, recovered or 

disposed of in a responsible manner. 

The EU WEEE directive (2002/95/EC) requires manufacturers to 

provide treatment information for each product type for use by treatment 

facilities. This information (product disassembly instructions) is posted 

on the Hewlett Packard web site at: http://www.hp.com/go/green. These 

instructions may be used by recyclers and other WEEE treatment 

facilities as well as HP OEM customers who integrate and re-sell HP 

equipment. 

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. 

Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. 

AMD Opteron is a US registered trademark of AMD Corporation. 

The only warranties for HP products and services are set forth in the express warranty statements accompanying such 

products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for 

technical or editorial errors or omissions contained herein.

HP BladeSystem c7000 Enclosure

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?