Video endoscopy for long lengths

EFER ENDOSCOPY TIVE 800 u. ARGUS 800

Condition: repair required (used), Functionality: limited functionality, The following item is for sale: - Our offer number: 36/129 - Endoscopy with LED light source + probe Videoendoscopy - Manufacturer:Efer - Type: Tive 800/T01 - Serial number:N-1433 - Power: 12V 120W - Dimensions: WxHxD 320x230x90 mm - Weight : 2,65 kg - without battery - Attention the endoscope could unfortunately not be tested by us and is therefore sold as defective - with probe Efer N1366 OTV 25 ES Bkmjaajriow - fully functional - with fiber optic Henning LED 2 light source white - Infinitely variable - Dimensions : WxDxH 210x300x105 mm - Weight : 2,55 kg - fully functional - optical condition according to photos - used - functional Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Year of construction: 1999, Condition: like new (used), Paul Wielopila width 800mm 9yxmsrunc

Year of construction: 2001, Condition: excellent (used), 1 used steam boiler ----- - mounted on a frame - manufacturer : LOOS, Gunzenhausen type : U-HD heating surface approx. : 14 qm capacity : 800 kg/h allowable working pressure : 10,0 bar increased test pressure : 18,5 bar water contents low level approx. : 748 l 3vbe7sxadg water contents full approx. : 1.108 l year of construction : 2001 equipped with Weishaupt gas burner WMG10/3-A, ZM, 100-1.000 kW, 15-500 mbar, nox cl 2, yoc 2015, fittings for gas supply, switch cabinet, feed water pump and the existing small and large-scale fittings.

Year of construction: 2014, Condition: used, machine/vehicle number: 20140203, Control: Heidenhain iTNC 530,Traverse paths X,Y,Z: 670,830,600 mm,Table size X x Y: 800 mm,Tool holder: HSK 63, Cpry9chkh

Year of construction: 2003, Condition: excellent (used), This Haul-off saw from our renowned brand SICA S.p.a. is in machine storage at Plastima Used Machinery. The saw is from 2003 and is in used but good condition. Brand: SICA S.p.A. Model: TRS/U 110-800 Bn022h7q330 Year of construction: 2003 Power: 5.5 kW Pipe outer diameter max: 110 up to 800 mm

Year of construction: 1997, Condition: used, x-travel 800 mm y-travel 600 mm z-travel 500 mm CNC-control TNC 430 HEIDENHAIN Table dimensions 540 x 540 x Ø 630 mm max. table load 300 kg spindle taper SK 40 spindle turning speed range 15.000 U/min drive capacity - spindle motor 10,5 kW feed range 30.000 mm/min rapid traverse 30 m/min tool change unit 30 Pos. coolant voltage 400 V total power requirement 31,0 kVA weight of the machine ca. 8,0 t Xvuslxlh dimensions of the machine ca. 2,85 x 3,45 x 2,70 m - Serial-No.: 11875 - Machine ON: 69.318 h - Programm Run: 36.873 h - CNC control: TNC 430 HEIDENHAIN - electrical hand wheel - coolant equipment - spindle head with new bearings

Year of construction: 2003, Condition: ready for operation (used), Make: HERMLE Type of machine: C 800 U Bnvyrnee0dk Year of manufacture: 2003 Control system: Siemens 840D Machine's weight: 9.000,- Tool holder: SK40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC 640, rotary table diameter: 800 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10,330 h, coolant supply: 20 bar, number of slots in tool magazine: 96, Year of construction: 2020, operating hours: 10,300 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 20210202, Equipment: Chip conveyor, Documentation/manual, High-performance 5-axis machining center with 630 Schunk Rota-S Plus (manual chuck) in excellent condition, professionally cleaned for its new owner. With mist extraction on request. Bn0yqbvtua2

Year of construction: 2004, Condition: excellent (used), 1 used low pressure steam boiler ----- manufacturer : LOOS, Gunzenhausen type : U-ND Cwxxtef2si capacity : 800 kg/h working pressure : 1 bar test pressure : 2 bar water contents full : 1.108 l year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, fittings for gas supply, switch cabinet with touch panel, and the existing small and large-scale fittings. Dimensions of boiler body (approx.): diameter incl. insulation : 1.230 mm width : 1.450 mm transport height : 2.200 mm length : 1.950mm length including burner : 2.700 mm 1 used feedwater module ----- manufacturer : LOOS, Gunzenhausen type : WSM content approx. : 800 l with switch cabinet, sampling water cooler, 2 dosing vessels

Year of construction: 2015, operating hours: 10,000 h, Condition: used, machine/vehicle number: 20150209, / Controller: Heidenhain,Travel X,Y,Z: 670,830,600 mm, / Working table XxY: , / Tool holder: HSK 63, B37qutuo

Year of construction: 1996, Condition: good (used), Steuerung Siemens 840 D 4-Achsen-Universalbearbeitungszentrum, NC-Schwenkbrücke vorbereitet incl. Schwenkbrücke,, starrer Aufspanntisch (Nachrüstung 2007), IKZ, Werkzeugbruchüberwachung (Nachrüstung 2002), el. Wärmeausdehnungskompensation, el. Handrad für SIEMENS, Späneförderer, Spülpistole, Ölnebelabsaugung, autom. Türantrieb (Nachrüstung 2001), Technische Details x-Weg 800 mm y-Weg 600 mm z-Weg 500 mm Drehzahl 8000 1/min Werkzeugwechseleinrichtung 30 Aufnahme SK 40 Starrer Winkeltisch 1000 x 560 mm Bboj8mwkly Maschinenabmessungen 2700 x 2210 x 2930 mm Gewicht 8500 kg.

Year of construction: 2019, Condition: ready for operation (used), Control Unit Brand Heidenhain Model TNC i 530 Main Drive Spindle speed range 18000 Number of axis 5 Movement X-Axis Movement 670 mm Bkmtpjejp9g Y-Axis Movement 830 mm Z-Axis Movement 600 mm Tools Type of tool holder HSK-A 63 Media Internal cooling Yes This POSmill H 800 U Universal Machining center was manufactured in the year 2019. It is equipped with a HEIDENHAIN TNC i 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. This High-performance machining center is ideal for both demanding tool and mold making and high-volume production. Standard torque drives on all rotary axes enable full simultaneous 5-axis machining (swivel range: +/-120 degrees, rotary table: 360 degrees endless). See attached the full tech specs of the original order confirmation. Application Types Milling

Year of construction: 2019, Condition: excellent (used), Control: HEIDENHAIN ITNC 530 Travels: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Working range Rotary table diameter 800 mm, 9 T-slots, table load 1200 kg, tool changer tool holder: HSK-A 63 96-fold tool changer tool length max.: 300 mm tool diameter max.: 75 mm tool diameter with adjacent empty station max.: 125 mm tool weight max.: 7 kg tool change time: 3 s Rapid traverse and feed rapid feed X Y Z 60 m/min, + max. speed A-axis 50 rpm C-axis 100 rpm Acceleration X Y Z max. 7 ms², Gzik0o General data Repeatability/positioning accuracy for new delivery 0.004 mm/0.008 mm (VDI/DGQ 3441) incl. tool holders with tools on the tool changer, (no suggestions), oil mist suction system IKZ Chip conveyor rated power 90 kVA full load current 125 A max. current load 200 A 400 V 50 Hz Garwels machines and service The right choice We will be glad to make you an offer for our additional services - Transport - Assembly of the machine - Commissioning of the machine - instruction We are exactly the right contact for - repair - maintenance - service Please also visit our website www garwels de

Year of construction: 2001, Condition: ready for operation (used), Make: HERMLE Type of machine: C 800 U Year of manufacture: 2001 Control system: Siemens 810D Machine's weight: 9.000 kg Tool holder: SK40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Table dimensions: D280 Bmasfu2fouj Number of tools in the magazine: 80 Internal coolant supply: yes

Year of construction: 2002, Condition: excellent (used), 1 used steam boiler ----- - mounted on a frame - manufacturer : LOOS, Gunzenhausen type : U-HD heating surface approx. : 14 qm capacity : 800 kg/h allowable working pressure : 10 bar increased test pressure : 18 bar water contents low level approx. : 748 l water contents full approx. : 1.108 l year of construction : 2002 CE mark : CE 0036 Czwiopmt equipped with Weishaupt gas burner, fittings for gas supply, switch cabinet, feed water pump and the existing small and large-scale fittings.

Year of construction: 2001, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 14484, TECHNICAL DETAILS x-path: 800 mm y-path: 600 mm z-path: 500 mm Speed range: 16,000 rpm Control: Siemens 810D Tool holder: SK40 Table size: D280 Number of tools in the magazine: 30 places Hu0aip0 MACHINE DETAILS Machine weight: approx. 9,000 kg Connected load: 43 kVA Operating voltage: 400 V, 3P, 50 Hz Internal coolant supply: available

travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, Year of construction: 1998, Condition: good (used), Functionality: fully functional, Equipment: Documentation/manual, Machine details Stock-No. 1105-03955 Type of machine Machining Center - Universal Make HERMLE Type C 800 U Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time CALL ME Freight basis EX WORK Technical details x-travel 800 mm y-travel 600 mm z-travel 500 mm control TNC 426 HEIDENHAIN Ch8lrgy turning speeds 15000 1/min taper ISO ISO 40 tool change unit 98 spindle 15 kW Additional information 5-axis machine with round-swivelling table, NC-swivelling table dia. 290mm,A-axis from -110° - +110°, B-axis 360°, Laser tool measuring system Ethernet interface, EXTRA MAGASIN 96 TOOLS flush gun, lots of accessories,

Year of construction: 2002, Condition: excellent (used), HERMLE C 800 U CNC machining center Accessories incl.: among others: 3D touch probe, tool holder set, various clamping devices, chip tray, hydr. aggregate, double back-up Technical Data speed: 0- 18`000 rpm spindle nose: HSK-A63 Feeding speed: 1-35 m/min feed force: 8000 N X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm dimensions of the machine: 2700 x 2210 x 2930 mm Cel0dqi8 Weight: 8500 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Year of construction: 2005, Condition: excellent (used), 1 used Steam Container Unit ----- consisting of: 1 used steamboiler ----- manufacturer : LOOS Gunzenhausen type : U-HD 800 Cyypdrwr heating surface approx. : 20 qm boiler capacity max. : 800 kg/h working pressure : 10 bar increased test pressure : 18 bar water contents low level approx. : 748 l water contents full approx. : 1.108 l year of construction : 2005 equipped with Klöckner gasburner, fittings for gas supply, switch cabinet, feed water pump, and the existing coarse and fine fittings. feed water tank, mud blow down tank, dosing plant the unit is installed in container, piped and electrically cabled.

Year of construction: 2000, Condition: good (used), Hermle C 800 U machining center 1. TECHNICAL DATA Speed (main spindle): 20 - 8000 rpm spindle nose: SK 40 B2vqwrdzfl feed speed: 1 - 35 m/min feed force: 8000 N X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm working table: +- 90 working table, surface: Ø 280 mm Dimensions: 2700 x 2210 x 2930 mm Weight: Approx. 7500 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Year of construction: 2003, Condition: good (used), Equipment: Chip conveyor, Documentation/manual, Hermle C800 U x-800mm y-600mm z-500mm Control iTnc 530 Heidenhain Table: Albeck clamping bridge Spindle holder HSK 63 Magazine extension 87 tool places Coolant device Probe preparation Oil mist extraction 5 axes Ihmh7i2 20 compartment hydr. clamping device el. handwheel chip conveyor Current operating hours see pictures Currently still under power and in production.

Year of construction: 1994, Condition: like new (used), Functionality: fully functional, HOFFMANN HT 200 dowel and slot drilling machine very good condition, the machine comes from a small model making company, has only been used a little and is absolutely as good as new, it has only very few signs of use can be used to mill slotted holes and drill dowel holes, the drilling height can be read very accurately on a digital counter with 3 drill bit holders: for drill bits with M10 external thread and for drill bits with 16mm and 20mm shank with auxiliary workpiece supports on the left and right, which can be swiveled and have a support roller the machine has a chassis with angle stop on the machine table for left and right, plus two 2000mm long stop rails with 2 folding stops each, the stop rails can be attached to the left and right of the machine table the clamping arms can be repositioned and moved with setting-out device for parapet railings, adjustable from 80-160mm and with digital counter, with mounting mushroom 380V, 1400 and 1800W through the 2 speed ranges 1350 and 2770rpm year of construction 1994 weight: approx. 280kg with the machine you can mill slotted holes for e.g. lock cases and similar items or produce all types of frame dowel joints, at right angles, butt joints and miter joints ideal for making dowel joints in timber frame construction, furniture, door, window and staircase construction and similar applications the drilling unit can be swiveled up to 65° on both sides and has a grid at 0°, so the machine can also be used to drill balusters into stair stringers very easily thanks to the 2 speed ranges, drills with large diameters can also be used without burning during drilling the grid and stops and the design of the machine allow dowel connections to be made in a very short time, making the machine very economical the machine requires a compressed air connection of 6 bar (the air consumption is very low) Clockwise rotation Bffvkcihd8 mills and drills very well and cleanly the workpiece is clamped with 2 pneumatic clamping cylinders using a foot pedal the linear laser at the top of the machine allows scribed dowel holes and inclinations to be drilled very quickly and accurately with a precision 12 mm raster rail, which has a center raster and 13 rasters on the left and right with 2 adjustable stops on the left and right, allowing the working width for slotted holes to be set Working path in the width: max. 330mm the maximum drill hole height is 90mm the maximum drill hole depth is 200 mm with stop the maximum workpiece height is 150mm everything works perfectly with description the machine is delivered and demonstrated by us personally throughout Germany for 220.00 euros, so you have no risk when buying, delivery to Austria and other countries is also possible on request the machine table is 1100mm wide and 250mm deep professional machine, not DIY store scrap You can start working with the machine immediately very stable and durable construction the precision guides with the play-free ball bearing bushes are OK and run smoothly, the swivel mechanism is also very smooth-running thanks to a ball bearing, locking is possible with a locking screw

Year of construction: 2012, Condition: like new (used), GRAULE ZS 170N cross-cut and mitre saw optically and technically very good condition, the machine comes from a small advertising company and was only used very little, only advertising boxes were cut with it cutting height: 170mm at 90° Cutting length: 430mm at 90° year of construction 2012 the workpiece can be clamped with 2 pneumatic clamping cylinders with coolant and lubricant device can be swiveled to both sides, to the left up to 70° and to the right up to 45° with detents at 90° and at 45° and with a very precise scale can also be tilted, on one side up to 10° and on the other side up to 45° with scale tilting is done with a hand crank, allowing very precise settings all angle and miter settings are very precise the machine runs very smoothly, the bearings are all OK all fixed stops can be readjusted very precisely the ideal saw for precise and fast cutting to length of profiles, scantlings and similar items, very precise and clean miter and rip cuts are possible, this saw should not be missing in any joinery or carpentry workshop De9bl9qm with MATABO dust extraction system for aluminum, wood and plastic with base table comes with 2 sturdy metal roller conveyors, 400 mm deep and 2000 mm long, each with 2 folding stops very stable and torsion-resistant construction made of gray cast iron with very precise ball bushing guide of the tool slide on hardened and ground steel shafts the machine is delivered and demonstrated by us throughout Germany for 220.00 euros, so you have no risk when buying it all functions work perfectly the device can be used immediately the saw blade has a diameter of 420mm, it is OK and sharpened for aluminum the machine table is approx. 800mm wide and 600mm deep the saw has a large saw blade height adjustment, so that smaller saw blades can also be used and set-down work is also possible 380V, 3000W saw blade speed 3500 rpm with motor protection switch against overload and motor brake the machine has the CE seal of approval and meets the requirements of the BG with hydraulic anti-kickback device the saw unit has an automatic return system Professional device, not DIY store scrap very powerful motor with 3000 watts, hardly any signs of fatigue occur Very robust and durable drive and guide technology with 100 mm suction nozzle Weight approx. 120kg

Year of construction: 2023, Condition: as good as new (ex-display), machine/vehicle number: 00192168, Highly accurate reference measuring center with extended measuring range in Z Factory overhaul 03/23, the measuring device can be customized / retrofitted. High precision air bearing multisensor coordinate measuring machine Mahr OMS 800/500 HA with active vibration damping Technical specifications: 3D multi-sensor instrument MarVision OMS 800/500 HA CNC Measuring range: approx. 800x800x500mm optical sensor (camera & laser) incl. Renishaw TP200 touch probe Camera with 2-step zoom incl. 10x lens including active vibration damping 2 x TFT monitors New evaluation station Intel Core i7 (Windows 7 operating system alternatively Windows 10) New Opticheck 3D 4.5 software Length measurement uncertainty: E1 = 0.9 + L / 600 μm, E3 = 1.9 + L / 400 μm (L in mm) Scale resolution: 0.1μm Weight: about 8090kg Max. Workpiece weight on glass plate: 50kg Max. Workpiece weight on granite: 100kg Dimensions: 2360x1940x3300mm Max. Travel speed: 200mm / s Air Supply: minute Compressed air supply: 6 bar +/- 0,1bar, constantly filtered, according to ISO 8573 part 1, classification 4; Consumption approx. 160Nl / min) Power supply: Voltage 115 / 230V +/- 10% Mains frequency: 50 / 60Hz +/- 5% Power consumption: 2500VA Environmental conditions: Max. allowed oscillations: ᐸ5 * 10-3m / s², corresponds to an amplitude ᐸ5μm with ᐸ5Hz Humidity: 40% -70% RL Ambient temperature: 20 ° C +/- 1 ° K permissible temperature gradient: 0.8K / h; 0.5K / d; 0.6K / m Optical sensor: • Pure grayscale processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation by programmatically saving the video image • Multifunctional multi-window technology • Computer-controlled transmitted and reflected light • 4-quadrant LED ring light • 3D multi-sensor head MSH Laser Sensor: Laser preparation for laser autofocus. High-resolution laser probe for static measurement, software-based intensity control for adaptation to different materials. Accuracy according to E1 average focus time 0.2s Software: • user-friendly, interactive programming • symbolic representation of the program structure • 32-bit multitasking enables parallel measurement and evaluation • powerful basic editor for customer-specific programs • automatic sensor calibration • Geometry elements: point, line, circle (envelope, compensation and pen), ellipse, plane, cylinder, cone, sphere • Geometry functions: cut, distance, angle, perpendicular, symmetry • Shape and position tolerances: straightness, roundness, flatness, cylindricity, parallelism, squareness, inclination, position, symmetry, concentricity, concentricity, total rotation, axial runout, overall plan run • maximum material principle (MMC) • current tolerance tables of common Din standards Bcuwtwxusp • Software module for creating any factory tolerance tables • Result output in qs-STAT

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank Required scope of delivery for push-through protection: 01x U-profile, used material colour: cream white total length: approx. 1.860 mm profile dimension: 60 x 45 mm including 2 swivelling agraffes number of hooks: 4 HK (hooks per agraffe) 02x safety pins, used material colour: sendzimir galvanized Further information: Shelving system: Vogelsang type: NS suitable for clear width: approx. 1.800 mm overhang: approx. 70 mm Two original agraffes are attached to the U-profile. With the help of these, the push-through safety device is into the upright and fixed with safety pins. fixed. B2h3jfjh39 General information about the article: This item is offered for pickup only. A desired transport or shipment of this article or a dispatch of this article is connected with additional costs, which can be inquired separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)