Circular saw

SCM-Holzkraft SC 3 W

Condition: new, - NEW- description Cutting plane directly on the saw blade Heavy steel and cast iron construction Precision-guided format sliding carriage made of aluminium, anodized as standard Large-area table extension guided on a telescopic arm and longitudinally adjustable Extendable aluminum telescopic fence, angle adjustable with professional stop flaps Rip fence with quick release and fine adjustment Large work table made of milled gray cast iron stays permanently flat The standard table extension and table extension enable easy work with larger workpieces Quiet running and precise cuts Coeecasejc Equipped with a powerful three-phase motor The large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service life Maximum cutting height is also achieved with the built-in scoring device Equipment details: Double cradle saw unit Generously dimensioned, made of steel/cast iron Close to the saw blade, supported on both sides for precision, smooth running and a long service life Adjustable in height and up to 45° with a crank Maximum cutting height is also achieved with the built-in scoring device Also available with scoring unit telescopic stop Extendable telescopic stop up to max. 2550 mm Angle adjustable With professional stop flaps Aluminum sliding carriage With a thousand times proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10-year Holzkraft guarantee on wear and tear on the guideways Rip fence with round rod guide With fine adjustment and quick release Stable round rod guide made of ground steel with a diameter of 45 mm Can be folded down as standard for cutting large workpieces Technical specifications: Dimensions and weights Weight (net) approx. 380 kg Connection suction Suction connection diameter 120 mm Suction connection diameter saw blade protection 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Space required length 5118 mm Space requirement width/depth 3830 mm electrical data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Nominal operating mode drive motor S6 Type of current AC Duty cycle drive motor 40% Mains frequency 50 Hz Sliding carriage and table Format slide length 2250 mm Table length 840 mm Format sliding carriage width 270 mm Table width 560 mm Format sliding carriage height 124 mm Table height 900 mm circular saw unit Cutting width with rip fence 900 mm Max. cutting height 90° 90 mm Max. cutting width to the left of the saw blade 2310 mm Max. cutting height 45° 63 mm trimming length 2250 mm Saw blade diameter 315 mm Saw blade inclination 90 - 45° Saw blade speed 4000 rpm Art. No. 5504323 Ausziehbarer Teleskop-fence to max. 2550 mm Winkeladjustable Mit Profi-Anschlagklappen Aluminium-sliding table Mit tausendfach bewährtem Kugelkontaktsystem Staub- and schmutzunempfindlich du

Year of construction: 2022, Condition: new, " Products " Woodworking " Holzkraft " Sizing circular saws Series SC 3 classic - Small format circular saws Wq7qfg3en Cutting plane directly on the roller table Precision-guided sliding table made of aluminium, anodized as standard Large table arm guided on telescopic arm and longitudinally adjustable Extendable aluminium telescopic stop, angle adjustable with professional stop flaps Rip fence with quick clamping and fine adjustment The standard table widening and table extension make it easy to work with larger workpieces. The large dimensioned sawing unit made of grey cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground grey cast iron remains permanently flat Heavy steel cast iron construction Smooth running and precise cuts Equipped with powerful three-phase motor Maximum cutting height is achieved even with pre-scoring device installed (pre-scoring device optional) Scope of delivery: Table extension and table extension Anodized aluminium sliding carriage Aluminium folding fence Rip fence with round bar guide and fine adjustment Model SC 3 classic 26 Article-No. 5504326 Technical data table dimensions 840 x 560 mm table height 900 mm working space 2600 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 82 mm max. clearance width left of saw blade 2310 mm Cutting

Condition: new, - New- - Cutting plane directly on the sliding carriage - Heavy steel and cast iron construction - Precision-guided format sliding carriage made of aluminium, anodised as standard - Large table extension on telescopic arm guided and longitudinally displaceable - Extendable aluminum telescopic stop, angle-adjustable with professional stop flaps - Rip fence with quick release and fine adjustment - Large work table made of milled gray cast iron remains permanently plan - The standard table extension and table extension extension make it easy to work with larger ones workpieces - Quiet running and precise cuts - Equipped with a powerful three-phase motor - The large dimensioned saw aggregate Gray iron is doubly fixed to the cast iron table and is a guarantee for stability, precision, smooth running and long lifetime - Maximum cutting height is also when installed scoring device reached Made in Italy Equipment details: Double cradle saw unit - Oversized, made of steel/cast iron - Close to the saw blade, supported on both sides for precision, smooth running and a long service life - Adjustable in height and up to 45° using a crank - Maximum cutting height is also when installed scoring device reached - Also available with scoring unit telescopic stop - Extendable telescopic stop up to max. 2550 mm - Angle adjustable - With professional stop flaps Aluminum sliding carriage - With a thousand times proven ball contact system - Resistant to dust and dirt minimum point of contact between ball and trapeze rail - 10-year Holzkraft guarantee against wear and tear guideways Rip fence with round rod guide - With fine adjustment and quick release - Stable round rod guide made of ground Coedhgij8i 45mm diameter steel - Foldable as standard for cutting large ones workpieces Technical specifications: Dimensions and weights Weight approx. 385 kg Dust extraction connection Suction connection diameter 120 mm Suction connection diameter saw blade protection 60 mm electrical data Drive motor power 5.0 kW Connection voltage 400 V Format sliding carriage and table Format slide length 2600 mm Format sliding carriage width 270 mm Format sliding carriage height 124 mm Table length 840 mm Table width 560 mm Table height 900 mm circular saw unit Cutting width with rip fence 900 mm Max. cutting width to the left of the saw blade 2310 mm trimming length 2600 mm Saw blade inclination 90 - 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Diameter (main) saw blade 315 mm Speed ​​of (main) saw blade 4000 rpm PU 1 Scope of delivery: Table extension and table widening Anodized aluminum format sliding carriage Aluminum folding stops Rip fence with round rod guide and fine tuning Item No. 5504326

Year of construction: 2023, Condition: new, " Products " Woodworking " Holzkraft " Sizing circular saws Series SC 3 classic - Small size circular saws Cutting plane directly on the roller table Precision-guided sliding table made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable Extendable aluminum telescopic fence, angle adjustable with professional stop flaps Rip fence with quick clamping and fine adjustment The standard table widening and table extension allow easy working with larger workpieces The large dimensioned sawing unit made of cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron remains permanently flat Heavy steel cast iron construction Quiet running and precise cuts Equipped with powerful three-phase motor Maximum cutting height is achieved even with pre-scoring device installed (pre-scoring device optional) Scope of delivery: Table extension and table extension Anodized aluminum format sliding carriage Aluminum folding fence Rip fence with round bar guide and fine adjustment Model SC 3 classic 26 Article no. 5504326VR Technical data table dimensions 840 x 560 mm table height 900 mm trim length 2600 mm cutting height max. 90° with scoring 100 mm cutting height max. 45° with scoring 82 mm max. clearance width to the left of the saw blade 2310 mm cutting width with rip fence 900 mm inclination of saw blade 90 - 45 ° Wq7p2vwqm saw blade Ø max. with scoring 315 mm saw blade Ø max. without scoring 315 mm scoring saw blade Ø (option) 80 mm 4000 min-1 Main saw blade speed 4000 min-1 Speed scoring saw blade 8000 min-1 Electrical connection 400 V / 50 Hz Motor power 5,0 kW Suction nozzle diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Weight 380 kg Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 2009, Condition: used, machine/vehicle number: KK 097099, Lagerort: Nattheim K0fxf3vvc

Year of construction: 2003, Condition: ready for operation (used), Holzkraft sliding table saw with tiltable saw blade and high-quality sliding table Trimming length 2250 mm Max. cutting height 90° / 45° 100/ 82 mm Inclination of the saw blade 90° - 45° Blcq338pxkw Motor power 5 kW ( 6.6 HP)

Condition: new, The work table made of heavily ribbed gray cast iron and guarantee the base made of welded steel Torsion resistance and vibration-free working High quality machine at a real entry-level price Unique in this performance class: - Format sliding carriage made of anodized aluminum for the highest cutting precision - Cutting plane directly on the saw blade - Swiveling saw blade unit from 90 - 45 ° - Table bracket with aluminum crosscut fence and adjustable Stop flap for plates and large workpieces - Rip fence with round bar guide and fine adjustment - Powerful engine - Made in Europe Dimensions and weights Weight (net) approx. 170kg Dust extraction connection Extraction nozzle diameter 120mm Exhaust nozzle diameter saw blade protection 60mm Transport width 680 mm Working area 1600 mm x 2300 mm Space requirement 2613.5 mm x 2134 mm Please add the specified dimensions with the space required to obtain the recommended free space for the machine. The dimensions take into account maximum travels or usable lengths Electrical data 400 V supply voltage Drive motor 1.8 kW Phase (s) 3 Ph Nominal operating mode drive motor S6 Current type AC Duty cycle drive motor 40% Mains frequency 50 Hz Sliding carriage and table Format sliding table 1140 mm x 200 mm x 70 mm Table 1024 mm x 224 mm x 900 mm saw unit Cutting width with rip fence 700 mm Max. Cutting height 90 ° 67mm Max. Cutting width to the left of the saw blade 1200 mm 0immgyy2 Max. Cutting height 45 ° 40mm Edging length 1200 mm Saw blade diameter 250mm Saw blade inclination 90 - 45 ° Saw blade speed 3900min¯¹ scope of delivery table extension Anodized aluminum sliding table Rip fence with round bar guide and fine adjustment Aluminum folding stop Eccentric Item No. 5504113

Year of construction: 2023, Condition: as good as new (ex-display), ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Wkdaetqd Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, - NEW - - Cutting plane directly on the saw blade - Large dimensioned cast iron saw unit double on the cast iron table Rxks7 fastened - guarantee for stability, precision, smooth running and long service life - Precision-guided format sliding carriage made of aluminium, standard anodized - 10-year HOLZKRAFT guarantee on wear and tear on the guideways of the sliding carriage - Rip fence with round rod guide and fine adjustment as standard - Large work table made of milled gray cast iron - Quiet running and precise cuts - Enable standard table widening and table extension easy work with larger workpieces - Extendable aluminum telescopic fence with angle adjustment and two professional folding stops -Made in Italy TECHNICAL SPECIFICATIONS Dimensions and weights Weight (net) approx. 295 kg Connection suction Suction connection diameter 120 mm Suction connection diameter saw blade protection 60 mm installation information Transport width 700 mm Machine body length 802 mm Machine body width/depth 615 mm Space required length 3860 mm Space requirement width/depth 2750 mm Explanation of space requirements The dimensions take into account maximum travel distances or usable lengths Working area length 1000 mm Working area width/depth 2000 mm Explanation of work area Please add the specified dimensions to the space required to calculate the to obtain the recommended free installation space for the machine. electrical data Connection voltage 400 V Mains frequency 50 Hz Drive motor power 4.0 kW Rated operating mode drive motor S 6 Duty cycle drive motor 40% Sliding carriage and table Format slide length 1600 mm Format sliding carriage width 270 mm Format sliding carriage height 124 mm Table length 1020 mm Table width 325 mm Table height 860 mm circular saw unit Cutting width with rip fence 900 mm Max. cutting width to the left of the saw blade 1660 mm trimming length 1600 mm Saw blade inclination 90 - 45° Max. cutting height 90° 100 mm Max. cutting height 45° 79 mm Saw blade diameter 315 mm Saw blade speed 4000 rpm FURNISHING Anodized aluminum format sliding carriage Handle for sliding carriage trimming frame Saw rip fence with round rod guide Stops Two professional folding stops trimming shoe eccentric clamp table extension table extension saw blade guard  

Year of construction: 2022, Condition: new, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized 99tsqk0 Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Year of construction: 2023, Condition: new, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V B7b227ikxj Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Year of construction: 2023, Condition: new, minimax si 400es 32 M A 3 UP In heavy professional version with scoring unit and format sliding carriage made of anodized aluminum Art:No. 5504765 Dimensions and weights Length approx. 3710 mm Height approx. 1717 mm weight approx. 745 kg Connection suction Suction port diameter 120 mm Suction port diameter saw blade guard 80 mm Electrical data Power scoring motor 0,55 kW Power drive motor 7,0 kW Supply voltage 400 V Mains frequency 50 Hz Circular saw unit Cutting width with rip fence 1270 mm Max. Trimming width left of saw blade 3260 mm Trimming length 3200 mm Saw blade inclination 90 45 °. Max. Cutting height 90° 136,5 mm Max. Cutting height 45° 97 mm Explanation Max. cutting height Independent of scoring device Diameter saw blade 400 mm Explanation Diameter of saw blade Independent of scoring unit Saw blade speed 3500/5000 min¯¹ Sliding carriage and table Length of sliding table 3200 mm Width of sliding table 360 mm Height of sliding table 142 mm P0dr2 table length 940 mm table width 560 mm table height 900 mm Scoring unit diameter saw blade 120 mm Saw blade speed 9200 min¯¹ Scoring unit equipped with its own drive and easily adjustable from the outside Smooth-running and precise format sliding carriage made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guideways Large table extension (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic cross-cut fence with two folding stops Precise rip fence, foldable for large panels, with quick clamping and integrated fine adjustment Table widening, table extension and eccentric clamp as standard equipment Sawing unit made of a robust cast iron ring with permanently precise dual pivoting segment guide and zero-point pivoting for a smooth and perfect cut, 6-year Holzkraft warranty on wear of the pivoting segments Large-surface work table made of stress-free gray cast iron High dead weight ensures precision and smooth running Equipped with powerful three-phase motor Version M: Height adjustment and tilting of the saw unit electrically, digital display for tilting Version A: On/off switch on the sliding carriage Version M A 3: Programmed control of the saw blade height and tilt and the position of the rip fence, stepless positioning of the rip fence via switch or automatic positioning system, position display via encoder, adjustment via ball screw, incremental adjustment possibility UP version: swivelling control panel at eye level Made in Italy Scope of delivery: Anodized aluminum format sliding carriage Material roller at the extension arm Saw parallel fence with round bar guide Table extension Table extension Folding stops Trimming shoe Eccentric clamp Handle for sliding carriage Saw blade pendulum protection Motorized height adjustment and tilting of the saw unit digital display for swiveling integrated on/off switch of the motors in the edger carriage READY3" version (3 axes) Swiveling control panel at eye level Location: Ex stock 54634 Bitburg Immediately available - Storage machine -

Year of construction: 2023, Condition: new, Dimensions and weights Weight approx. 489 kg Connection suction Suction port diameter 120 mm Suction port diameter saw blade protection 60 mm Electrical data Power drive motor 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Circular saw unit Cutting width with rip fence 900 mm Max. Cutting width left of saw blade 3200 mm Trimming length 3260 mm Saw blade inclination 90 45 ° Max. cutting height Cutting height 90° 90 mm Max. cutting height Cutting height 45° 63 mm Explanation Max. cutting height Independent of scoring device Diameter saw blade 315 mm Explanation Diameter of saw blade Independent of scoring device Saw blade speed 4000 min¯¹ Sliding carriage and table Length of sliding table 3200 mm Width of sliding table 360 mm Height of sliding table 142 mm Table length 840 mm table width 560 mm table height 900 mm Ikksu3v Scoring unit Diameter saw blade 100 mm Saw blade speed 8000 min¯¹ The solid work table made of heavily ribbed grey cast iron and the base frame made of welded steel guarantee high torsional stiffness and vibration-free work Smooth-running and precise sliding carriage made of anodized aluminium with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guideways Cast iron saw unit with permanently precise double swivel segment guide and zero-point swivel, 6 years Holzkraft warranty on wear of the swivel segments Equipped with powerful three-phase motor Saw blade tilting is controlled at a Ska

Year of construction: 2022, Condition: new, Sizing saw minimax sc 4e 27 with scoring device With tiltable saw blade and sliding carriage made of anodized aluminum for the demanding user Item number 5504528VR Brand: Holzkraft Weight (net) approx. 473kg Suction port diameter 120mm Suction port diameter saw blade guard 60mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Rated operation mode drive motor S6 Duty cycle drive motor 40% Sliding carriage and table sliding table length 2600mm Format sliding carriage width 360mm Haug8ej Format sliding carriage height 142mm Table length 840mm Table width 560mm table height 900mm Circular saw unit Cutting width with rip fence 900mm Max. Trimming width left of saw blade 3200mm Trimming length 2660mm Saw blade inclination 90 - 45 Max. Cutting height 90° 100mm Max. cutting height Cutting height 45° 63mm Explanation max. cutting height Independent of scoring blade Diameter saw blade 315mm Explanation Diameter of saw blade Independent of scoring unit Saw blade speed 4000min¯¹ Scoring unit Diameter scoring saw blade 100mm Speed of scoring saw blade 8000min¯¹ EQUIPMENT Equipment Scoring unit Drive by motor of main saw blade via flat belt, with saw blade Ø 100 mm Anodized aluminum format sliding carriage ✔ Handle for sliding carriage ✔ Material roller on edging frame ✔ Saw parallel fence with round bar guide Fence Two professional folding fences Trimming shoe ✔ Eccentric clamp ✔ Table widening ✔ Table extension ✔ Saw blade protection hood ✔ Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale

Condition: as good as new (ex-display), Promotional model from stock -1x sanding belt K100 -5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm -6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm -board tool -Mitre fenceDimensions and weights: - Length (product) approx.: 1820 mm - Width/depth (product) approx.: 1050 mm - Height (product) approx.: 1470 mm - Weight (net) approx.: 400 kg Drive power: Bxnxadoqf - Oscillation motor power: 0.38 kW Suction connection: - Suction nozzle diameter: 150 mm Work table(s): - Worktable length: 1000 mm - Worktable width: 280 mm - Table swivel: 45 / 35 ° Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit: - Sanding belt length: 2640 mm - Sanding belt width: 150 mm - Belt speed(s): 14 m/s - Oscillation stroke: 20 mm - Sanding surface length: 890 mm - Sanding surface width: 150 mm - Sanding height max.: 150 mm Subject to prior sale. new exhibition machine

Year of construction: 2022, Condition: new, New machine Year of construction 2022 Suspended control panel with Siemens control and 10" large touch display Control of the saw blade height/inclination and positioning of the rip fence via the control panel Max. Cutting height 200mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min¯¹ High dead weight ensures vibration-free operation Large outrigger table with material roller Extendable aluminum longitudinal fence with two folding fences and digital position indicator 7.5 kW main motor mounted on a robust cast iron frame Format sliding carriage with four bearings made of anodized aluminium with high torsional rigidity Multiple locking mechanism on the sliding table Crw9q3uh73 Table extension and table extension made of thick sheet metal as standard Large pendulum guard can be conveniently raised using a gas pressure spring Saw blade clamping via tool-free Rapid system Location: Hochheim Availability: at short notice

Year of construction: 2023, Condition: new, Carriage length : 3200 mm Cutting width at rip fence: 1450 mm Cutting width at the cross-cut fence: 3200 mm Cutting height 90°: 200 mm Cutting height 45°: 140 mm Scorer: yes Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric Saw blade inclination display: digital Cutting height display: digital 7bqqrb0hdk Rip fence display: digital Cutting ruler display: digital Saw blade diameter: 550 mm Speeds: 2800 / 3665 / 4800 Motor power: 7.5 kW Motor brake: yes / automatic Suction connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 3700 mm Machine height : 1330 mm Weight: 1300 kg

Year of construction: 2024, Condition: new, Machine is on stock and available for qick delivery through Europe. SC2c is equiped with: - 1600mm Minimax sliding table - Without scorring unit !! - 90 cm capacity of paralel fence TECH. SPEC: - 4.0 kW motor - strong support arm - 2x flipover stops on sliding table Crvyvhzsxp - max blade diameter: 315mm

Condition: new, Sliding carriage 2300 mm Motor 5 kW Saw blade Ø max. 315 mm Nkabcnd8 Saw blade swivels 90 - 45° Cutting height 100 mm Cutting width 900 mm Suction connection bottom Ø 120 mm / top Ø 80 mm incl. saw blade pendulum guard Weight 485 kg Price advantage 1.547,00 €

cutting height (max.): 100 mm, saw blade diameter: 315 mm, Year of construction: 2022, Condition: new, Good morning, Yeopajig We are offering for sale a brand new format saw manufactured by SCM MiniMax series model sc 3c To begin with some useful information about the machine: * carriage length 225 cm * blade diameter max 315 mm * max cutting height 100 mm ( at a right angle ). * max cutting height 78 mm ( at an angle of 45 degrees ). * single phase motor ( 220V ) * machine equipped with undercutter * blade lined at an angle of 0-45 degrees * 2022 year of production * weight 411 kg Machine brand new, available from stock.

Condition: as good as new (ex-display), - Exhibition machine - swiveling, Rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Godnz8 Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg new exhibition machine

Year of construction: 2021, Condition: used, Sawblade tiltable 45 ° Length of the rolling table 3260 mm cutting width 900 mm Mmv9ozv Motor output 5,0 kW Cutting height 100 mm Cutting height at 45° mm Saw blade diameter 315 mm Speed U/min. weight of the machine ca. 489 kg

Year of construction: 2023, Condition: new, Holzkraft minimax sc 2c sliding table saw 5504215 With tiltable saw blade and high-quality sliding sizing carriage made of anodized aluminum Cutting plane directly on the saw blade Large-dimensioned saw unit made of cast iron, double-mounted on the cast table - guarantee for stability, precision, smooth running and long service life Precision-guided format sliding carriage made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the guide tracks of the sliding carriage Rip fence as standard with round rod guide and fine adjustment Coy89o0ao3 Large work table made of milled grey cast iron Smooth running and precise cuts Standard table widening and table extension allow easy working with larger workpieces Extendable aluminum telescopic fence with angle adjustment and two professional folding fences Made in Italy Dimensions and weights: Weight (net) approx. 295kg Connection suction Suction port diameter 120mm Suction port diameter saw blade guard 60mm Installation information Transport width 700mm Machine body length 802mm Machine body width/depth 615mm Required space length 3860mm Space requirement width/depth 2750mm Explanation of space requirements The dimensions take into account maximum travel distances or useful lengths Working area length 1000mm Working range width/depth 2000mm Supply voltage 400V Mains frequency 50Hz Power drive motor 4,0kW Rated operating mode drive motor S6 Duty cycle drive motor 40% Sliding carriage and table Length of sliding table 1600mm Width of sliding table 270mm Format sliding carriage height 124mm Table length 1020mm table width 325mm table height 860mm Circular saw unit Cutting width with rip fence 900mm Max. Trimming width left of saw blade 1660mm Trimming length 1600mm Saw blade inclination 90 - 45 Max. Cutting height 90°100mm Max. cutting height Cutting height 45°79mm Diameter saw blade 315mm Saw blade speed 4000min¯¹ Holkraft dealer - accessories available on request!

Condition: as good as new (ex-display), - Exhibition machine - swiveling, Rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, Rmq3m0rrbp max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg new exhibition machine

Year of construction: 2023, Condition: new, Holzkraft minimax sc 1g sliding table saw Ultra-compact design with tiltable saw blade and unique features in this performance class. The working table made of heavily ribbed cast iron and the base frame made of welded steel guarantee torsional stiffness and vibration-free work Maximum length for formatting 1200 mm Format sliding carriage made of anodized aluminum Cutting plane directly on the saw blade Saw unit can be tilted up to 45 degrees Powerful motor Trimming frame with aluminum crosscut fence and folding fence for panels and large workpieces Rip fence as standard with round bar guide and fine adjustment High quality machine at a real entry price Made in Europe TECHNICAL DATA: Weight (net) ca.170kg Connection suction Suction port diameter 120mm Suction port diameter saw blade guard 60mm Installation information: Bs92uagn99 Transport width 680mm Required space length 2613.5mm Required space width/depth 2134mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths Working area length 1600mm Working range width/depth 2300mm Supply voltage 400V Mains frequency 50Hz Power drive motor 1,8kW Rated operating mode drive motor S6 Duty cycle drive motor 40% Sliding carriage and table: Format sliding carriage length 1140mm Format sliding carriage width 200mm Format sliding carriage height 70mm Table length 1024mm Table width 224mm table height 900mm Circular saw unit: Cutting width with rip fence 700mm Max. Trimming width left of saw blade 1200mm Trimming length 1200mm Saw blade inclination 90 - 45 Max. Cutting height 90°67mm Max. cutting height Cutting height 45°40mm Diameter saw blade 250mm Speed saw blade 3900min¯¹ Please send us your inquiry!