HPE ProLiant DL380 Gen9 Server Data Sheet

HPE ProLiant DL380 Gen9 Server
Data Sheet

Router-switch.com 1
Content
Overview .............................................................................................................................................2
Standard Features...............................................................................................................................3
Pre-configured Models......................................................................................................................12
Configuration Information - Factory Integrated Models..................................................................14
Core Options .....................................................................................................................................20
Technical Specifications.....................................................................................................................42
Where to Buy ....................................................................................................................................47
Source................................................................................................................................................47
Contact Us
Tel: +1-626-239-8066 (USA) / +852-3050-1066 / +852-3174-6166
Fax: +852-3050-1066 (Hong Kong)
Email: sales@router-switch.com (Sales Inquiries)

Router-switch.com 2
Overview
The HPE ProLiant DL380 Gen9 Server delivers the best performance and expandability in the Hewlett
Packard Enterprise 2P rack portfolio. Reliability, serviceability and near continuous availability, backed
by a comprehensive warranty, make it ideal for any environment. Deploy the data center standard.
Front View - 8SFF Chassis with Optional Universal Media Bay shown
Note:
① Quick removal access panel ⑧ UID button
② Bay 1 ⑨ USB 3.0
③ Bay 2 ⑩ Serial label pull tag
④ Bay 3 ⑪ 8 SFF Drive Cage Bay
⑤ Power On/Standby button and system
power LED button
⑫ Drive Bay 2. Blank shown, 8SFF or
6NVMe optional
⑥ Health LED ⑬ Optional 2 SFF HDD, blank shown.
Requires Universal Media bay
⑦ NIC status ⑭ Optional Optical drive. Requires
Universal Media bay
Rear View
Note:

Router-switch.com 3
① PCI Slots (Slots 1-3 top to bottom,
riser shipped standard)
⑨ Power supply Power LED
② PCI Slots (Slots 4-6top to bottom,
requires second riser card, and
second processor)
⑩ HPE Flexible Slot Power Supply bay 1
(800w shown)
③ Optional serial port ⑪ VGA connector
④ Optional rear 2 SFF HDD (supported
in 24 SFF or 12 LFF front end)
⑫ Embedded 4x1GbE Network Adapter
⑤ Power supply Power connection ⑬ USB 3.0 connectors (2)
⑥ Power supply Power LED ⑭ Unit ID LED
⑦ HPE Flexible Slot Power Supply bay
2 (800w shown)
⑮ Optional FlexibleLOM ports (Shown:
4x1GbE)
⑧ Power supply Power connection
What’s New
· NVMe 1.6TB to 6.4TB MU & 1.92TB to 7.68TB RI SFF SCN DS SSDs
· SAS 12G 400GB to 6.4TB MU, 960GB to 7.68TB RI & 400GB to 3.2TB WI SFF SC DS SSDs
· SATA 6G 480GB to 1.92TB MU SFF SC DS SSDs
Standard Features
Processor
Up to two of the following depending on model
Model CPU
frequency
Cores L3 Cache Power QPI DDR4 Hz
E5-2699v3 2.3GHz 18 45MB 145W 9.6GT/s 2133
E5-2698v3 2.3GHz 16 40MB 135W 9.6GT/s 2133
E5-2697v3 2.6GHz 14 35MB 145W 9.6GT/s 2133
E5-2695v3 2.3GHz 14 35MB 120W 9.6GT/s 2133
E5-2690v3 2.6GHz 12 30MB 135W 9.6GT/s 2133
E5-2687Wv3 3.1GHz 10 25MB 160W 9.6GT/s 2133
E5-2683v3 2.0GHz 14 35MB 120W 9.6GT/s 2133
E5-2680v3 2.5GHz 12 30MB 120W 9.6GT/s 2133
E5-2670v3 2.3GHz 12 30MB 120W 9.6GT/s 2133
E5-2667v3 3.2GHz 8 20MB 135W 9.6GT/s 2133
E5-2660v3 2.6GHz 10 25MB 105W 9.6GT/s 2133
E5-2650v3 2.3GHz 10 25MB 105W 9.6GT/s 2133
E5-2650Lv3 1.8GHz 12 30MB 65W 9.6GT/s 2133
E5-2643v3 3.4GHz 6 20MB 135W 9.6GT/s 2133
E5-2640v3 2.6GHz 8 20MB 90W 8.0GT/s 1866
E5-2637v3 3.5GHz 4 15MB 135W 9.6GT/s 2133
E5-2630v3 2.4GHz 8 20MB 85W 8.0GT/s 1866

Router-switch.com 4
E5-2630Lv3 1.8GHz 8 20MB 55W 8.0GT/s 1866
E5-2623v3 3.0GHz 4 10MB 105W 8.0GT/s 1866
E5-2620v3 2.4GHz 6 15MB 85W 8.0GT/s 1866
E5-2609v3 1.9GHz 6 15MB 85W 6.4GT/s 1600
E5-2603v3 1.6GHz 6 15MB 85W 6.4GT/s 1600
E5-2699v4 2.2GHz 22 55MB 145W 9.6GT/s 2400
E5-2698v4 2.2GHz 20 50MB 135W 9.6GT/s 2400
E5-2697v4 2.3GHz 18 45MB 145W 9.6GT/s 2400
E5-2697Av4 2.6GHz 16 40MB 145W 9.6GT/s 2400
E5-2695v4 2.1GHz 18 45MB 120W 9.6GT/s 2400
E5-2690v4 2.6GHz 14 35MB 135W 9.6GT/s 2400
E5-2687Wv4 3.0GHz 12 30MB 160W 9.6GT/s 2400
E5-2683v4 2.1GHz 16 40MB 120W 9.6GT/s 2400
E5-2680v4 2.4GHz 14 35MB 120W 9.6GT/s 2400
E5-2667v4 3.2GHz 8 25MB 135W 9.6GT/s 2400
E5-2660v4 2.0GHz 14 35MB 105W 9.6GT/s 2400
E5-2650v4 2.2GHz 12 30MB 105W 9.6GT/s 2400
E5-2650Lv4 1.7GHz 14 35MB 65W 9.6GT/s 2400
E5-2643v4 3.4GHz 6 20MB 135W 9.6GT/s 2400
E5-2640v4 2.4GHz 10 25MB 90W 8.0GT/s 2133
E5-2637v4 3.5GHz 4 15MB 135W 9.6GT/s 2400
E5-2630v4 2.2GHz 10 25MB 85W 8.0GT/s 2133
E5-2630Lv4 1.8GHz 10 25MB 55W 8.0GT/s 2133
E5-2623v4 2.6GHz 4 10MB 85W 8.0GT/s 2133
E5-2620v4 2.1GHz 8 20MB 85W 8.0GT/s 2133
E5-2609v4 1.7GHz 8 20MB 85W 6.4GT/s 1866
E5-2603v4 1.7GHz 6 15MB 85W 6.4GT/s 1866
E5-2699Av4 2.4GHz 22 55MB 145W 9.6GT/s 2400
NOTE:
1. All processors above 120W use a high efficiency Heatsink. Doublewide PCIe cards are only supported with this
Heatsink. For processors with a standard Heatsink that require double wide PCIe cards, the Graphics Enablement
kit option is also required (719082-B21).
2. Mixing of E5-2600v3 and E5-2600v4 processors is not supported.
3. Field upgrade from E5-2600v3 to E5-2600v4 is supported.
4. All processors support Hyper-Threading except E5-2609 v4/v3 and E5-2603 v4/v3.
Chipset
· Intel® C610 Series Chipset
· Intel® E5-2600v3 Processor Family
· Intel® E5-2600v4 Processor Family
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
On System Management Chipset

Router-switch.com 5
HPE iLO (Firmware HPE iLO4 2.0) 4GB NAND
Memory
One of the following depending on model
Type
HPE SmartMemory
DDR4 Registered (RDIMM), Load Reduced (LRDIMM) or Persistent Memory (NVDIMM)
DIMM Slots
Available
24 (12 DIMM slots per processor, 4 channels per processor, 3 DIMMs
per channel)
Maximum Capacity
(LRDIMM)
3TB (24 x 128GB LRDIMM @2400MHz)
Maximum Capacity
(RDIMM)
768GB (24 x 32GB RDIMM @2400MHz)
Maximum Capacity
(NVDIMM)
128GB (16 x 8GB NVDIMM)
NVDIMM support only with the E5-2600v4 processors, and RDIMMs only
Note mixing of 2133 and 2400MHz memory is not supported
Note mixing of RDIMM and LRDIMM memory is not supported
Note the 128GB LRDIMM may not be mixed with other DIMM capacities/types
Memory Protection
Advanced ECC: Advanced ECC uses single device data correction to detect and correct single and all
multibit error that occurs within a single DRAM chip.
Online Spare: Memory online spare mode detects a rank that is degrading and switches operation to
the spare rank.
Expansion Slots
Primary Riser
(Standard)
Expansion
Slots #
Technology Bus
Width
Connector
Width
Bus
Number
Form
Factor
Notes
1 PCIe 3.0 X8 X16 7 Full-
height,
half-
length
slot
Proc 1
2 PCIe 3.0 X8 X16 10 Full-
height,
half-
length
slot
Proc 1
3 PCIe 3.0 X8 X8 13 Half
length
/ full
height
Proc 1
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: All slots support PCIe cards to 150W or more, but an additional Power Cable Kit is

Router-switch.com 6
required.
NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging
the High Performance Heatsink. For Processors requiring double wide GPU support please
order the GPU enablement kit (719082-B21).
Slot 2 PCIe
Riser (Optional
3-slot)
719073-B21
Expansion
Slots #
Technology Bus
Width
Connector
Width
Bus
Number
Form
Factor
Notes
4 PCIe 3.0 X16 X16 16 Full-
height,
full-
length
slot
Proc 2
5 PCIe 3.0 X16 X16 20 Full-
height,
full-
length
slot
Proc 2
6 PCIe 3.0 X8 X8 23 Full-
height,
half-
length
slot
Proc 2
NOTE: When populating the second optional riser slot, the second processor must be
installed.
required.
Slot 1 PCIe
Riser (Optional
2-slot)
719076-B21
Expansion
Slots #
Technology Bus
Width
Connector
Width
Bus
Number
Form
Factor
Notes
2 PCIe 3.0 X16 X16 0x05 Full-
height,
full-
length
slot
Proc 1
3 PCIe 3.0 X8 X8 0x08 Full-
height,
half-
length
slot
Proc 1
NOTE: This will replace the standard primary riser and supports double wide cards.

Router-switch.com 7
required.
Storage Controller
· Entry Models
HPE Dynamic Smart Array B140i Controller
NOTE: The embedded B140i controller will operate in UEFI only mode. For legacy support an additional controller
will be needed, and for CTO orders please also select the Legacy mode settings part (758959-B22)
NOTE: The B140i defaults to AHCI off the chipset. Smart array needs to be enabled on the SATA only models if
required.
NOTE: The B140i will not operate in Legacy mode.
· Base Models
HPE Flexible Smart Array P440ar/2G FIO Controller
HPE Flexible Smart Array P840/4G FIO Controller
HPE Smart Array P840ar/2G Controller
· Performance Models
HPE Flexible Smart Array P440ar/2GB
Internal Storage Devices
· Optical Drive
Ships standard in Performance Models
Optional: DVD-ROM, DVD-RW
· Hard Drives
None ship standard
· Hard Drive Bays
8 SFF with optional Universal Media Bay, 8 SFF bay or 6 NVME drive options
24 SFF plus optional 2 SFF drives rear
12 LFF plus optional 3 LFF drives rear
NOTE: The 3 LFF rear drives will consume space for the secondary riser.
NOTE: The 12 LFF model also supports 2 SFF rear which allows for the second riser.
NOTE: The 6 NVMe drive option can only be leveraged in the SFF model and replaces Bay 2.
4 LFF drive bays total
NOTE: The Universal Media Bay (724865-B21) not available with the LFF model or the 24SFF model, and can only
be populated in Bay1.
NOTE: The 8SFF can be upgraded with a drive cage to 16 or 24 SFF with field upgrades. For optimal upgrade Bay2
should be populated second, with Bay 3 the last to be populated for a field upgrade to 24 SFF.
NOTE: The 4LFF model cannot be upgraded to 12LFF in the field.
NOTE: All Pre-configured models come with an embedded 10-Port SATA controller. Optional HPE Flexible Smart

Router-switch.com 8
Array and Smart SAS HBA Controllers can be added.
Maximum Internal Storage
Category Capacity Configuration
Hot Plug SFF SAS 52.0TB 24+2 x 2TB (with optional rear SFF drive cage)
Hot Plug SFF SATA 52.0TB 24+2 x 2TB (with optional SFF drive cage)
Hot Plug LFF SAS 180.0TB 12+3 x 12TB (with optional rear LFF drive cage)
Hot Plug LFF SATA 180.0TB 12+3 x 12TB (with optional rear LFF drive cage)
Hot Plug SFF SAS
SSD
397.8TB 24+2 x 15.3TB (with optional rear SFF drive cage)
Hot Plug SFF SATA
SSD
199.68TB 24+2 x 7.68TB (with optional rear SFF drive cage)
Hot Plug LFF SATA
SSD
57.6B 12+3 x 3.84TB (with optional rear LFF drive cage)
Hot Plug SFF NVMe
PCIe SSD
46.08TB
NVMe +
36TB SFF
6x7.68TB NVMe plus 36TB with 18 SFF (Bay 1, bay 3 and
optional rear drive support)
Power Supply
· HPE 500W Flex Slot Platinum Hot Plug Power Supply
NOTE: Available in 94% efficiency.
· HPE 800W Flex Slot Platinum Hot Plug Power Supply
NOTE: Available in 94% and 96% efficiency.
NOTE: Also available in -48VDC and 227VAC/380VDC power inputs.
· HPE 1400W Flex Slot Platinum Plus Hot Plug Power Supply
NOTE: Available in 94% efficiency.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows
for hot plug, tool-less installation into HPE ProLiant Gen9 Performance Servers. Flex Slot power supplies
are certified for high-efficiency operation and offer multiple power output options, allowing users to
"right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste,
lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper
cord is also included with each standard AC power supply option kit. If a different power cord is required,
please check the ProLiant Power Cables web page.
System Fans
Non-redundant Redundant
2P model - 6 fans
NOTE: 1P models typically ship with 4 standard fans. The second processor option kit contains 2 additional fans.
NOTE: The 12LFF and 24SFF models ship with 6 High Performance fans as standard.
NOTE: High Performance Fan Kit is available to meet ambient temperature environments.
NOTE: High Performance Fan Kit is required for Passive GPU support.
NOTE: The 8SFF Bay1 kit (719067-B21) will ship with 6 High efficiency fans.
Interfaces

Router-switch.com 9
Serial Optional
Video 2 (1 front, optional via Universal Media Bay, 724865-B21), 1 back not
active simultaneously
FlexibleLOM Network Ports 4 x 1Gb ports shipping standard with optional FlexibleLOM
HPE iLO Remote
Management Network Port
1 Gb Dedicated
Micro SD Slot 1 Micro SD
NOTE: The Micro SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into
the SD slot while the server is powered.
USB 3.0 Up to 5 totals: 1 front, 2 rear, 2 internal (secure), 2 optional USB 2.0
front via Universal Media Bay
SID (Systems Insight Display) Optional
NOTE: Not shipping as standard. Available as a CTO option or as a field upgrade (768900-B21).
Operating Systems and Virtualization Software Support for ProLiant Servers
· Microsoft Windows Server
· Canonical Ubuntu
· Red Hat Enterprise Linux (RHEL)
· SUSE Linux Enterprise Server (SLES)
· Oracle Solaris
· VMware
· Citrix XenServer
· ClearOS
NOTE: ClearOS allows you to build a fully functional server that is just right for you at no upfront cost. It is available
via CTO preload, Intelligent Provisioning or via download.
Upgradeability
· Upgradeable to 2 processors (36 Cores)
NOTE: Processor upgrade available from Intel® Xeon® Processors E5-2600v3.
· Up to 24 DIMM slots available for higher Memory capacity
FlexibleLOM connector for 1 Gigabit or 10 Gigabit networking options
· HPE Flexible Smart Array or Smart HBA Controllers
· Embedded 10-Port SATA, B140i as standard
· Optional 3 slot riser (x16, x16, x8), or 2 slot primary riser (x16, x8)
NOTE: To take advantage of the additional 3 PCI slot upgrade, the second processor must be installed.
· Redundant Power Supply
· Optical Drive supported via Universal Media Bay
NOTE: The Universal Media bay provides front VGA and 2xUSB 2.0, plus ability to add 2SFF and Optical.
NOTE: Universal Media bay is only available with 8 or 8+8SFF chassis & can be populated in Bay1 only.
· HPE Legacy Mode (FIO only, 758959-B22)
NOTE: UEFI is the default mode for all SKUs. Can change default to legacy via CTO.
Industry Standard Compliance
· ACPI 2.0b Compliant
· PCIe 3.0 Compliant
· PXE Support

Router-switch.com 10
· WOL Support
· Microsoft® Logo certifications
· USB 3.0 Support
· USB 2.0 Support
NOTE: This support is on the optional Universal Media Bay.
· Energy Star
· ASHRAE A3/A4
NOTE: The DL380 Gen9 is now one of the first HPE ProLiant Gen9 Servers with Extended Ambient Support up to 45
C for data center infrastructures designed for better energy efficiency such as but not limited to fresh air cooling.
· UEFI (Unified Extensible Firmware Interface Forum)
NOTE: UEFI is the default for the DL380 Gen9. Legacy model can be selected in the field or as a CTO option (758959-
B22).
Graphics
Integrated Matrox G200eH2 video standard with 16MB of Video RAM
· 1280 x 1024 (32 bpp)
· 1920 x 1200 (16 bpp)
HPE iLO 4 On System Management Memory
· 16 MB Flash
· 256 MB DDR3 with ECC (112 MB after ECC and video)
HPE Server UEFI/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability
and more secured configuration than the legacy ROM while interacting with your server at boot time.
HPE ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot
Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
· Secure Boot
· Operating system specific functionality
· Support for > 2.2 TB (using GPT) boot drives
· USB 3.0 Stack
· Embedded UEFI Shell
· Mass Configuration Deployment Tool using RESTful API for iLO 4
· PXE boot support for IPv6 networks
· Boot support for option cards that only support a UEFI option ROM
· Network Stack configurations
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support
UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your
HPE ProLiant Gen9 Server.
Form Factor
One of the following depending on model.
· 2U Rack form factor
· 8 SFF & 24SFF Drive Bay Version: 3.44 x 17.54 x 26.75 in (8.73 x 44.55 x 67.94 cm)

· 4 LFF & 12LFF Drive Bay Version: 3.44 x 17.54 x 28.75 in (8.73 x 44.55 x 73.02 cm)
NOTE: Dimensions without bezel.
Embedded Management
HPE
Integrated
Lights-Out
(HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting and
remote management with HPE iLO.
UEFI Configure and boot your servers securely with industry standard Unified Extensible
Firmware Interface (UEFI).
RESTful API RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server management
such as configuration and maintenance tasks based on modern industry standards.
Intelligent
Provisioning
Hassle free server and OS provisioning for 1 or few servers with Intelligent
Provisioning.
Embedded
Remote
Support
The Hewlett Packard Enterprise embedded remote support, when used with Insight
Online direct connect or HPE Insight Remote Support, allows HPE ProLiant servers
to transmit hardware events directly to Hewlett Packard Enterprise or a Hewlett
Packard Enterprise Authorized Partner for automated phone home support.
Server utilities
Smart Update Optimize firmware and driver updates with Smart Update solutions including Smart
Update Manager (SUM) and Service Pack for ProLiant (SPP).
HPE Systems
Insight
Manager (HPE
SIM)
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE
Integrity Servers, and also provides you with basic support for non-HPE servers.
HPE SIM also integrates with Smart Update Manager to provide quick and seamless
firmware updates.
Scripting Tool
Kit and
Windows
PowerShell
Provision 1 to many servers using your own scripts to discover and deploy them
with Scripting Tool Kit (STK) for Windows and Linux or Scripting Tools for Windows
PowerShell.
RESTful
Interface Tool
RESTful Interface tool is a scripting tool to provision using RESTful API for iLO 4 to
discover and deploy servers at scale.
HPE iLO
Mobile
Application
Enables the ability to access, deploy, and manage your server anytime from
anywhere from select smartphones and mobile devices.
HPE Insight
Online
HPE Insight Online, available at no additional cost as part of your Hewlett Packard
Enterprise warranty or contractual support agreement with Hewlett Packard
Enterprise, is a personalized dashboard for simplified tracking of IT operations and
support information from anywhere, anytime.
Security
· Power-on password
· Serial interface control
· Administrator's password
· UEFI
· iLO 4 (Integrated Lights-Out 4) has 12 customizable user accounts and SSL encryption

· Integrated Lights-Out can be disabled via a Global Setting
· iLO Advanced supports directory services integration
· TPM 1.2
Pre-configured Models
No.1 Entry Model Base Models
[SKU Number] 826681-B21 826682-B21 826683-B21 848774-B21
Model Name HPE ProLiant
DL380 Gen9 E5-
2609v4 1P 8GB-R
B140i 8SFF 500W
PS Entry SATA
Server
HPE ProLiant
DL380 Gen9
E5-2620v4 1P
16GB-R P440ar
8SFF 500W PS
Base Server
HPE ProLiant
DL380 Gen9 E5-
2620v4 1P 16GB-R
P440ar 12LFF
2x800W PS Base
Server
HPE ProLiant
DL380 Gen9 E5-
2630v4 1P 16GB-
R P440ar 8SFF
500W PS Base
Server
Processor Intel® Xeon® E5-
2609v4
Intel® Xeon® E5-2620v4 Intel® Xeon®
E5-2630v4
Number of
Processors
One
Memory 8GB (1x8GB
Registered
DIMMs, 2400
MHz)
NOTE: With the
E5-2609v4 this
memory DIMM
will only operate
at 1866MHz.
16GB (1x16GB Registered DIMMs,
2400 MHz)
NOTE: With the E5-2620v4 this
memory DIMM will only operate at
2133MHz.
16GB (1x16GB
Registered
DIMMs, 2400
MHz)
NOTE: With the
E5-2630v4 this
memory DIMM
will only operate
at 2133MHz.
Network
Controller
HPE Embedded 1Gb Ethernet 4-port 331i Adapter, plus optional HPE
FlexibleLOM or stand up card
Storage
Controller
HPE Dynamic
Smart Array
B140i, plus
optional HPE
Flexible Smart
Array or Smart
HBA controller
NOTE: Default is
AHCI off chipset,
Smart Array needs
to be enabled on
SATA model.
HPE Flexible Smart
Array P440ar/2GB
HPE Flexible
Smart Array
P840ar/2G
Controller
HPE Flexible
Smart Array
P440ar/2GB

Hard Drive None ship
standard
None ship standard
Internal Storage 8 SFF HDD Bays
(upgradable to 24)
8 SFF HDD Bays
(upgradable to 24)
12 LFF HDD
Bays
8 SFF HDD Bays
(upgradable to
24)
Optical Drive Bay Optional
Universal Media
Bay (724865-B21)
Optional Universal
Media Bay
(724865-B21)
Not Available Optional
Universal Media
Bay (724865-
B21)
Optical Drive Optional DVD-
ROM (726536-
B21) or DVD-RW
(726537-B21) via
the Universal
Media Bay
(724865-B21)
Optional DVD-
ROM (726536-B21)
or DVD-RW
(726537-B21) via
the Universal
Media Bay
(724865-B21)
Optional via
HPE Mobile
USB DVDRW
Drive (701498-
B21)
Optional DVD-
ROM (726536-
B21) or DVD-RW
(726537-B21) via
the Universal
Media Bay
(724865-B21)
PCI-Express Slots 3 PCIe slots (+3 PCI slots available with upgrade option, second processor
required)
Power Supply (1) HPE 500W Flex
Slot Platinum
Power Supply
(1) HPE 500W Flex
Slot Platinum
Power Supply
(2) HPE 800W
Flex Slot
Platinum
Power Supply
(1) HPE 500W
Flex Slot
Platinum Power
Supply
Fans 4 hot plug fans,
redundant
4 hot plug fans,
redundant
6 hot plug high
performance
fans,
redundant
4 hot plug fans,
redundant
Management iLO Management (standard), Intelligent Provisioning (standard), iLO Advanced
(optional), Insight Control (optional), HPE OneView (optional)
Form Factor Rack (2U), HPE
Easy Install Rails
Rack (2U), HPE Easy Install Rails with CMA
Warranty 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day
response
No.2 Performance Models
[SKU
Number]
826684-B21 852432-B21
Model Name HPE ProLiant DL380 Gen9 E5-2650v4
2P 32GB-R P440ar 8SFF 2x10Gb
2x800W Perf Server
HPE ProLiant DL380 Gen9 E5-2660v4 2P
64GB-R P440ar 8SFF 2x10Gb 2x800W Perf
Server
Processor Intel® Xeon® E5-2650v4 Intel® Xeon® E5-2660v4
Number of
Processors
Two

Memory 32GB (2x16GB Registered DIMMs,
2400 MHz)
64GB (4x16GB Registered DIMMs, 2400
MHz)
Network
Controller
HPE Embedded 4x1Gb, plus
2x10Gb-T FlexibleLOM
HPE Embedded 4x1Gb, plus 2x10Gb SFP+
FlexibleLOM
Storage
Controller
HPE Flexible Smart Array P440ar/2GB
Hard Drive None ship standard
Internal
Storage
8 SFF HDD Bays (upgradable to 24)
Optical Drive
Bay
Universal Media Bay (724865-B21)
Optical Drive HPE Half-Height SATA DVD-RW Optical Drive
PCI-Express
Slots
6 PCIe 3.0 slots
Power
Supply
(2) HPE 800W Flex Slot Platinum Power Supply
Fans 6 hot plug fans, redundant
Management iLO Management (standard), Intelligent Provisioning (standard), iLO Advanced
(standard), HPE OneView (optional)
Energy Star Meets Energy Star requirements
Form Factor Rack (2U), HPE Easy Install Rails with CMA
Warranty 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response
NOTE: UEFI is the standard default for all Predefined models.
Configuration Information - Factory Integrated Models
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only
valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved
configurator. Contact Us for information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number
of initial hard drives ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for
additional information.
Step 1: Base Configuration (choose one of the following configurable models)

TO Server HPE ProLiant
DL380 Gen9
8SFF
Configure-to-
order Server
HPE ProLiant
DL380 Gen9
NVMe 6 Solid
State Drive
Express Bay
Configure-to-
order Server
HPE ProLiant
DL380 Gen9
24SFF
Configure-to-
order Server
HPE ProLiant
DL380 Gen9
4LFF
Configure-to-
order Server
HPE ProLiant
DL380 Gen9
12LFF
Configure-to-
order Server
SKU Number 719064-B21 810393-B21 767032-B21 767033-B21 719061-B21
Processor 2 (optional) x HPE Smart Socket Guide
DIMM Slots 24 DIMM slots for RDIMM, LRDIMM DDR4 Memory
Storage
Controller
HPE Dynamic Smart Array B140i, plus optional HPE Flexible Smart Array or Smart
HBA controller
PCIe 3 PCIe slots (+3 PCI slots available with upgrade option, second processor required)
Drive Cage 8SFF Hot Plug
(+8SFF and
Universal
Media Bay
Optional)
8SFF +6NVMe
Hot Plug
(+8SFF or
Universal
Media Bay
Optional)
24SFF Hot
Plug
4LFF Hot Plug 12LFF Hot Plug
Network
Controller
HPE
Embedded
1Gb Ethernet
4-port 331i
Adapter, plus
optional HPE
FlexibleLOM
or stand up
card
HPE
Embedded
1Gb Ethernet
4-port 331i
Adapter
HPE Embedded 1Gb Ethernet 4-port 331i
Adapter, plus optional HPE FlexibleLOM or stand
up card
Fans 4 hot plug
fans,
redundant
6 hot plug high performance
fans, redundant
4 hot plug
fans,
redundant
6 hot plug high
performance
fans,
redundant
Management iLO Management (standard), Intelligent Provisioning (standard)
USB 1 front, 2
internal, 2
rear
1 front, 1
internal, 2
rear
1 front, 2
internal, 2
rear
No front USB support
Ears HPE Quick Release Ears
NOTE: With the NVMe CTO Server (810393-B21) there are limitations on GPU support.
NOTE: The NVMe CTO Server (810393-B21) ships with the standard x8 Risers supporting 6xNVMe drives.
Step 2: Choose Required Options (only one of the following fromeach list unless otherwise noted)
HPE
Processors
E5-2600v4 series Processors
HP DL380 Gen9 Intel® Xeon® E5-2650Lv4 (1.7GHz/14- 817941-L21

core/35MB/65W) FIO Processor Kit
HP DL380 Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/10-
817931-L21
HPE DL380 Gen9 Intel® Xeon® E5-2643v4 (3.4GHz/6-
NOTE: Ships with a High Performance Heatsink.
817939-L21
817935-L21
HP DL380 Gen9 Intel® Xeon® E5-2623v4 (2.6GHz/4-
817929-L21
817927-L21
817925-L21
817923-L21
HPE DL380 Gen9 Intel® Xeon® E5-2687Wv4 (3.0GHz/12-
NOTE: This processor is not supported in a 12LFF or 24LFF CTO Server +
Rear drive.
817957-L21
817967-L21
817965-L21
817963-L21
HPE DL380 Gen9 Intel® Xeon® E5-2697Av4 (2.6GHz/16-
817955-L21
817961-L21
817959-L21
817953-L21

817951-L21
817945-L21
817943-L21
817937-L21
817947-L21
817933-L21
NOTE: If two processors are desired, select one xxxxxx-L21 and one corresponding xxxxxx-B21.
NOTE: Up to two processors supported. Mixing different processor models is not supported.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: v4 Processor requires PC4-2400T Memory Kits.
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v# (not yet
designated) = version number.
HPE
Memory
NOTE: Select one or more memory from below
NOTE: LRDIMM and RDIMM are all distinct memory technologies and cannot be mixed within a
server. The majority of ProLiant Gen9 servers support LRDIMM and RDIMM.
NOTE: HPE memory from previous generation servers are not qualified or warranted with this
HPE ProLiant server. HP Smart Memory is required to realize the memory performance
improvements and enhanced functionality listed in this document for Gen9
NOTE: If only one processor is installed only half of the total DIMM slots are available. When
populating with two processors all DIMM slots are available.
NOTE: Kits described as LP include Low Power DIMMs.
NOTE: Depending on the memory configuration and processor model, the memory speed may
run at 2400MHz, 2133MHz, 1866MHz, 1600MHz, or 1333MHz.
Registered DIMMs (RDIMMs) for E5-2600v4 Series
HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered
Memory Kit
805347-B21
HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17
Registered Memory Kit
805349-B21
HP 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17
836220-B21

HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17
805351-B21
Load Reduced DIMMs (LRDIMMs) for E5-2600v4 Series
HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load
Reduced Memory Kit
805353-B21
HP 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load
Reduced Memory Kit
805358-B21
HPE 128GB (1x128GB) Octal Rank x4 DDR4-2400 CAS-20-18-18 Load
Reduced Memory Kit
809208-B21
HPE Persistent Memory (NVDIMM)
NOTE: The following memory is supported by the E5-2600v4 series Processor only.
HPE 8GB NVDIMM Single Rank x4 DDR4-2133 Module
NOTE: NVDIMMs are only supported with E5-2600v4 processors, excluding
field upgrades from E5-2600v3 to E5-2600v4.
NOTE: A maximum of 16 NVDIMMs supported.
NOTE: Can only be mixed with RDIMMs.
NOTE: Depending on Processor selected this memory will run at 2133MHz
maximum.
782692-B21
HPE Power
Supplies
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must
be of the same input voltage, output rating, and efficiency rating. If non-matching power
supplies are installed, you may receive an error message and/or experience operational issues
with your server.
NOTE: Prior to selecting a power supply option, it is highly recommended that you review your
server configuration in the HPE Power Advisor tool to determine the right size power supply for
your server configuration.
HPE Flex Slot Platinum Hot-Plug Power Supplies
HP 500W Flex Slot Platinum Hot Plug Power Supply Kit 720478-B21
HP 800W Flex Slot Platinum Hot Plug Power Supply Kit 720479-B21
HP 800W Flex Slot Titanium Hot Plug Power Supply Kit
NOTE: Flex Slot Titanium power supplies support power efficiency of up to
96% and include a standard C-14 power inlet connector.
720482-B21
HP 800W Flex Slot Universal Hot Plug Power Supply Kit
NOTE: Flex Slot universal power supplies support power efficiency of up to
94% and support both 277VAC/380VDC power inputs.
720484-B21
HP 800W Flex Slot -48VDC Hot Plug Power Supply Kit
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to
94%.
720480-B21
HP 1400W Flex Slot Platinum Plus Hot Plug Power Supply Kit 720620-B21
HP 750W Flex Slot Hot Plug Battery Backup Module
NOTE: Flex Slot Battery Backup provides 750W output and 500W in
paralleled configuration.
NOTE: Only 1 Battery Backup module per server, and a Flex Slot Power
738024-B21

Supply needed in parallel.
NOTE: The above power supply options are all 80Plus Platinum-certified with an efficiency rating
of up to 94%. Support for HPE Power Discovery Services is included with the 1400W Flex Slot
option.
Step 3: Choose Additional Factory Integratable Options (only one of the following from each list
unless otherwise noted)
HPE Storage
Controllers
NOTE: The embedded B140i controller will be used as the primary controller if no controller
is selected from the list below. Embedded SATA controller can support up to 8 SATA hard
drives. Cable Kit may be required.
HPE Flexible Smart Array Controllers
HP Smart Array P440ar/2GB FBWC 12Gb 2-ports Int FIO SAS
Controller
NOTE: Provides support for up to 8 internal SAS/SATA drives without
using a PCIe slot.
NOTE: Includes the HP Smart Storage Battery.
749974-B21
HPE Smart Array Controllers
HP Smart Array P440/4GB FBWC 12Gb 1-port Int FIO SAS
Controller
using a PCIe slot.
761872-B21
HP Smart Array P840/4GB FBWC 12Gb 2-ports Int FIO SAS
Controller
761874-B21
HPE Smart Host Bus Adapters
HP H240ar 12Gb 2-ports Int FIO Smart Host Bus Adapter
using a PCIe slot.
749976-B21
HPE Cable Options
HP DL380 Gen9 12LFF Rear 2SFF or 3LFF P840/440 SAS Cable Kit 783007-B21
HP DL380 Gen9 2SFF Front SAS x4 Cable Kit
NOTE: Required for front mount 2SFF to H240/P440ar, H240 or
embedded B140i SATA controller.
783008-B21
HP DL380 Gen9 8SFF SAS Cable Kit
NOTE: Required for 8/16/24 SFF models for use with P840/440
controllers.
783009-B21
HP DL380 Gen9 2SFF x8 Front Cable Kit
NOTE: Required for front/rear mount 2SFF to P440/840 PCIe controller.
785989-B21
HP DL380 Gen9 12LFF SAS Cable Kit
NOTE: Required for 12LFF models with P440/840 PCIe controllers.
785991-B21
HP DL380 Gen9 8SFF H240 Cable Kit
NOTE: Required for 8/16/24 SFF models for use with H240/P440ar,
786092-B21

H240 PCIe or embedded B140i SATA controller.
HP DL380 Gen9 12LFF H240 SAS Cable Kit
NOTE: Required for 12LFF models with H240/P440ar, H240 or
embedded B140i SATA controller.
786215-B21
BIOS Mode HP Legacy FIO Mode Setting
NOTE: If selected, then B140i will not be supported and can no longer
be a primary controller, therefore SAS internal controller must be
selected to be the primary controller.
758959-B22
Controller
State
HP FIO Enable B140i Setting
NOTE: Must be selected when B140i is used as primary controller and
RAID is desired.
784308-B21
HP Mfg FIO Enable HBA Mode Setting
NOTE: When selected if H240ar/H240 are used as the primary controller
then RAID is not allowed.
792962-B21
HPE Unique
Options
HP 2SFF Front SPEC Perf FIO Mount
NOTE: May only be selected with 8SFF CTO Server and optical media
cage kit and 2SFF Drive cage option. When this option is selected, a
primary controller is not required for the 8SFF CTO Server.
787945-B21
HPE Insight
Software
HP Insight Control including 1yr 24x7 Support ProLiant
ML/DL/BL-bundle Single Server FIO License
C6N36A
HPE
Converged
Infrastructure
Management
Software
HPE OneView Advanced (with iLO Advanced)
HP OneView for ProLiant DL Server incl 3 yr 24x7 Supp FIO Bundle
Physical 1 Svr Lic
E5Y43A
HPE OneView Advanced (without HPE iLO Advanced)
HP OneView w/o iLO including 3yr 24x7 Support FIO 1 Server LTU P8B31A
Step 4: Choose Additional Options for Factory Integration from Core and Additional Options
sections below
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact
Us for additional information.
HPE Unique
Options
HPE DL380 Gen9 NVMe 6 Solid State Drive Express Bay
Enablement Kit
774741-B21
NOTE: This option provides support for up to 6NVMe drives, and can only be populated in
BAY2 in SFF chassis only, can be used with Bay1 and Bay 3 populated.
NOTE: The HPE DL380 Gen9 High Performance Fan Kit is required for NVMe support
(719079-B21).

NOTE: The PCIe card in this enablement kit can only be populated in slot2 (primary) or slot 5
(secondary).
NOTE: For true x16 support with this option a secondary riser (719073-B21) is needed
(second processor required).
NOTE: Kit includes Mylar film for Universal Media Bay (724865-B21) support to ensure
optimal airflow.
NOTE: For NVME CTO support, please use the NVME CTO Server (810393-B21), this kit is for
field upgrades only.
NOTE: There are limitations on GPU support with the NVMe bay installed.
HPE DL380 Gen9 Universal Media Bay Kit 724865-B21
NOTE: The HPE DL380 Gen9 Universal Media bay provides front VGA and 2xUSB 2.0; plus
support for 2xSFF front drives (724864-B21) and ODD support (No included); and can only
be located in Bay1 in either an 8SFF or 8+8SFF model.
HPE DL380 Gen9 Graphics Enablement Kit 719082-B21
NOTE: This kit includes alternative 2 heatsinks plus6 cables to enable GPU support. Other
limitations apply, see Graphic section for more details.
NOTE: We support up to 2 Double wide and 3 single wide Graphics cards, limitations apply.
NOTE: Double Wide GPUs will occupy slots 2 and 5 and will leave only 2 slots left open.
HPE DL380 Gen9 High Performance Fan Kit 719079-B21
NOTE: This kit is required for specific Ambient temperature environments.
NOTE: This kit is also required to support Passive GPUs.
NOTE: This kit provides max cooling for your Server.
HPE DL380 Gen9 2SFF Front/Rear SAS/SATA Kit 724864-B21
NOTE: For 2SFF front the Universal Media Bay (724865-B21) is required.
NOTE: 2SFF in the rear is only supported with a 24SFF model or 12LFF (719061-B21) CTO
Server.
NOTE: Rear drives will not support higher than 160W CPUs and other special/unique CPUs.
HPE DL380 Gen9 3LFF Rear SAS/SATA Kit 768856-B21
NOTE: This is only supported in the 12LFF model.

NOTE: 3LFF rear drives will consume the 2nd riser expansion slot.
NOTE: Rear drives will not support higher than 160W CPUs and other special/unique CPUs.
HPE DL380 Gen9 Primary 2 Slot GPU Ready Riser Kit 719076-B21
Slot1: 1x Gen3 x16 FH/FL, 1xGen3 x8 FH/HL.
NOTE: This replaces the standard Primary riser in slot1.
HPE DL380 Gen9 Secondary 3 Slot GPU Ready Riser Kit 719073-B21
Slot2: 2xGen3 x16 FH/FL, 1xGen3 x8 FH/HL.
HPE DL380 Gen9 8SFF Bay1 Cage/Backplane Kit 719067-B21
NOTE: To add an additional 8SFF drive cage in Bay1.
NOTE: To get to 16SFF total please populate bay 2 with 768857-B21 (from an 8SFF starting
point).
NOTE: This ships with 6 High Efficiency Fans.
NOTE: Selecting this option does not allow you to select the Universal Media Bay.
HPE DL380 Gen9 Additional 8SFF Bay2 Cage/Backplane Kit 768857-B21
NOTE: To add an additional 8SFF drive cage in Bay 2. This is the optimal solution to upgrade
to 16SFF total and allows the flexibility to add the Universal Media Bay (724865-B21) for 2
additional SFF or Optical.
HPE DL380 Gen9 Systems Insight Display Kit 768900-B21
NOTE: The Systems Insight Display no longer ships as standard but is available as a Factory
Integrated or field upgrade option.
HPE DL380 Gen9 Rear Serial Port and Enablement Kit 768896-B21
HPE DL380 Gen9 P440ar/H240ar Riser 2 SAS Expander Kit 844115-B21
NOTE: Cable kit required to support the SAS Expander (727250-B21) in the secondary riser
(719073-B21) with the P840ar or P440ar.
HPE 12Gb SAS Expander Card with Cables for DL380 Gen9 727250-B21
NOTE: SAS expander to enable 24SFF field upgrade.
NOTE: Primary population in slot2 or 3 of the Primary Riser.
HPE
Processors
E5-2600v4 series Processors
HPE DL380 Gen9 Intel Xeon E5-2643v4 (3.4GHz/6-
core/20MB/135W) Processor Kit
817939-B21
817927-B21
817959-B21

817951-B21
817945-B21
817943-B21
817937-B21
817947-B21
817933-B21
HPE DL380 Gen9 Intel Xeon E5-2650Lv4 (1.7GHz/14-
817941-B21
HPE DL380 Gen9 Intel Xeon E5-2630Lv4 (1.8GHz/10-
817931-B21
817925-B21
NOTE: This processor does not support Hyper-Threading.
817923-B21
NOTE: This processor does not support Hyper-Threading.
817935-B21
817929-B21
HPE DL380 Gen9 Intel Xeon E5-2687Wv4 (3.0GHz/12-
817957-B21
817967-B21
817965-B21

817963-B21
HPE DL380 Gen9 Intel Xeon E5-2697Av4 (2.6GHz/16-
817955-B21
817953-B21
HPE DL380 Gen9 Intel Xeon E5-2699Av4 (2.4GHz/22-
871026-B21
719044-B21
NOTE: Up to 2 processors supported. Performance and Energy Star Model configurations
include two processors.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo2: Intel® Turbo Boost Technology 2.0 provides more computing power when
you need it with performance that adapts to spikes in your workload and delivers more
performance upside than then previous generation turbo technology.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
NOTE: The xxxxxx-B21 is the 2nd processor and ships with 2 additional FANs for factory of
field installation.
NOTE: Mixing of E5-2600v3 and E5-2600v4 Processors is not supported.
NOTE: Field upgrade from E5-2600v3 to E5-2600v4 is supported.
HPE Memory Registered DIMMs (RDIMMs) for E5-2600v3 Series
NOTE: The following memory is supported by the E5-2600v3 series Processors.
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15
728629-B21
HPE 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15
726718-B21
726719-B21

NOTE: Depending on Processor selected this memory will run at 1600, 1866 or 2133MHz.
NOTE: Mixing of DIMM types is not supported.
NOTE: Mixing of 2133 and 2400MHz DIMMs is not supported.
NOTE: The following memory is supported by the E5-2600v3 series Processors.
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load
Reduced Memory Kit
726724-B21
Registered DIMMs (RDIMMs) for E5-2600v4 Series
805347-B21
805349-B21
Registered Smart Memory Kit
P00423-B21
805351-B21
836220-B21
HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load
Reduced Memory Kit
805353-B21
HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load
Reduced Memory Kit
805358-B21
HPE 128GB (1x128GB) Octal Rank x4 DDR4-2400 CAS-20-18-18
Load Reduced Memory Kit
809208-B21
NOTE: These LRDIMMs do not support NVDIMMs.

NOTE: Mixing the 128GB LRDIMM with other capacities is not supported.
HPE Persistent Memory (NVDIMM)
HPE 8GB NVDIMM Single Rank x4 DDR4-2133 Module 782692-B21
NOTE: NVDIMMs are only supported with E5-2600v4 processors, excluding field upgrades
from E5-2600v3 to E5-2600v4.
NOTE: A maximum of 16 NVDIMMs supported.
NOTE: Can only be mixed with RDIMMs.
NOTE: Depending on Processor selected this memory will run at 2133MHz maximum.
HPE Optical
Drives
HPE 9.5mm SATA DVD-ROM Optical Drive 726536-B21
NOTE: The Universal Media Bay (724865-B21) is required for this option.
HPE 9.5mm SATA DVD-RW Optical Drive 726537-B21
NOTE: The Universal Media Bay (724865-B21) is required for this option.
HPE Mobile USB DVD-RW Optical Drive 701498-B21
NOTE: This is only supported on USB 3.0 ports.
HPE Hard
Drives
12G SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HPE 2.4TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e
Digitally Signed Firmware HDD
881457-B21
HPE 1.8TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e
872481-B21
HPE 1.2TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally
Signed Firmware HDD
872479-B21
HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty
870759-B21
870757-B21
872477-B21
870753-B21
872475-B21
HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty 512e
870765-B21
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HPE 2TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e HDD 765466-B21

HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally
Signed Firmware HDD
832514-B21
HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e
765464-B21
12G SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HPE 600GB SAS 12G Enterprise 15K LFF (3.5in) SCC 3yr Wty
P04695-B21
HPE 300GB SAS 12G Enterprise 15K LFF (3.5in) SCC 3yr Wty
P04693-B21
12G SAS Hot Plug LFF (3.5-inch) SC Midline Hard Drives - 1yr Warranty
HPE 8TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e
819201-B21
HPE 4TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally
Signed Firmware HDD
872487-B21
Signed Firmware HDD
872487-B21
Signed Firmware HDD
872485-B21
Signed Firmware HDD
872485-B21
HPE 10TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium
512e Digitally Signed Firmware HDD
857644-B21
Signed Firmware HDD
846514-B21
HPE 6TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e HDD 861754-B21
Signed Firmware HDD
846524-B21
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HPE 2TB SATA 6G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e
765455-B21
HPE 1TB SATA 6G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally
Signed Firmware HDD
655710-B21
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HPE 8TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e
819203-B21
HPE 6TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e HDD 861750-B21
HPE 4TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally
Signed Firmware HDD
872491-B21
Signed Firmware HDD
872491-B21
HPE 1TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty HDD 861691-B21

HPE 12TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium
881785-B21
HPE 10TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium
857648-B21
Signed Firmware HDD
872489-B21
Signed Firmware HDD
872489-B21
12G SAS Mixed Use Hot Plug SFF (2.5-inch) Solid State Drives
HPE 6.4TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally
Signed Firmware SSD
P09096-B21
Signed Firmware SSD
P09094-B21
Signed Firmware SSD
P09092-B21
HPE 800GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally
Signed Firmware SSD
P09090-B21
Signed Firmware SSD
P09088-B21
Signed Firmware SSD
P04539-B21
Signed Firmware SSD
P04537-B21
Signed Firmware SSD
P04533-B21
Signed Firmware SSD
P04527-B21
Signed Firmware SSD
P04525-B21
Signed Firmware SSD
872386-B21
Signed Firmware SSD
873365-B21
Signed Firmware SSD
872382-B21
Signed Firmware SSD
873363-B21
Signed Firmware SSD
872376-B21
Signed Firmware SSD
873359-B21

Signed Firmware SSD
872374-B21
Signed Firmware SSD
873367-B21
12G SAS Hot Plug RI-3 SFF (2.5-inch) SC Solid State Drives
HPE 7.68TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty
Digitally Signed Firmware SSD
P04523-B21
P04521-B21
P04519-B21
HPE 960GB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty
P04517-B21
P06592-B21
P06590-B21
P06588-B21
P06586-B21
P06584-B21
872394-B21
872392-B21
875326-B21
872390-B21
875313-B21
875311-B21
870148-B21
870144-B21
875330-B21

12G SAS Hot Plug MU-3 LFF (3.5-inch) SC Solid State Drives
HPE 800GB SAS 12G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally
Signed Firmware SSD
872378-B21
HPE 800GB SAS 12G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally
Signed Firmware SSD
P04529-B21
12G SAS Hot Plug SFF (2.5-inch) Write Intensive Solid State Drives
HPE 3.2TB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally
Signed Firmware SSD
P04547-B21
Signed Firmware SSD
P04545-B21
Signed Firmware SSD
P09102-B21
HPE 800GB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty
P09100-B21
P09098-B21
P04543-B21
P04541-B21
Signed Firmware SSD
873357-B21
873355-B21
873351-B21
6G SATA Hot Plug SFF (2.5-inch) SC Read Intensive Solid State Drives
HPE 3.84TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty
P04570-B21
P06198-B21
875513-B21
P04566-B21
HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty
P06196-B21
875511-B21
P04564-B21

P06194-B21
875509-B21
P04560-B21
875503-B21
P04556-B21
P04482-B21
P04480-B21
P04478-B21
P04476-B21
P04474-B21
P06200-B21
Read Intensive - 6G SATA - M.2 - Solid State Drives
HPE 480GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally
Signed Firmware SSD
875498-B21
HPE 960GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally
Signed Firmware SSD
875500-B21
6G SATA Hot Plug SFF (2.5-inch) SC Mixed Use Solid State Drives
HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally
Signed Firmware SSD
P09722-B21
HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally
Signed Firmware SSD
P09716-B21
Signed Firmware SSD
P09712-B21
Signed Firmware SSD
P07930-B21
Signed Firmware SSD
P07926-B21
Signed Firmware SSD
P07922-B21

Signed Firmware SSD
872352-B21
Signed Firmware SSD
875478-B21
Signed Firmware SSD
872348-B21
Signed Firmware SSD
875474-B21
Signed Firmware SSD
872344-B21
Signed Firmware SSD
875470-B21
Signed Firmware SSD
875483-B21
Signed Firmware SSD
P00896-B21
Mixed Use - 6G SATA - M.2 - Solid State Drives
HPE 240GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed
Firmware SSD
875488-B21
Firmware SSD
875492-B21
Firmware SSD
875490-B21
6G SATA Hot Plug LFF (3.5-inch) SCC Read Intensive Solid State Drives
HPE 1.92TB SATA 6G Read Intensive LFF (3.5in) SCC 3yr Wty
P09693-B21
HPE 960GB SATA 6G Read Intensive LFF (3.5in) SCC 3yr Wty
P09689-B21
HPE 480GB SATA 6G Read Intensive LFF (3.5in) SCC 3yr Wty
P09687-B21
6G SATA Hot Plug LFF (3.5-inch) SC Mixed Use Solid State Drives
HPE 1.92TB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally
Signed Firmware SSD
P09724-B21
HPE 960GB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally
Signed Firmware SSD
P09718-B21
Signed Firmware SSD
P07932-B21
Signed Firmware SSD
P07928-B21
Signed Firmware SSD
P07924-B21

Signed Firmware SSD
875480-B21
Signed Firmware SSD
872350-B21
Signed Firmware SSD
P03691-B21
Signed Firmware SSD
872346-B21
HPE NVMe PCIe Read Intensive SFF (2.5 inch) Solid State Drives
HPE 7.68TB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr
Wty Digitally Signed Firmware SSD
P10218-B21
P10216-B21
P10214-B21
HPE 2TB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty
877986-B21
875591-B21
HPE 960GB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr
875589-B21
HPE 480GB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr
875587-B21
HPE 375GB NVMe x4 Lanes Write Intensive SFF (2.5in) SCN 3yr
878014-B21
NOTE: With NVMe support only 1xDouble Wide Graphics card is supported.
HPE NVMe PCIe Mixed Use SFF (2.5 inch) Solid State Drives
HPE 6.4TB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty
P10226-B21
P10224-B21
P10222-B21
877998-B21
875597-B21
877994-B21
HPE 800GB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty
875595-B21

HPE 400GB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty
875593-B21
NOTE: The NVMe CTO Server (810393-B21) or the NVMe Express Bay Enablement kit
(774741-B21) are required to support these drives.
M.2 SSD
HPE Universal SATA HHHL 3yr Wty M.2 Kit 878783-B21
NOTE: M.2 drives go in PCIe slots and use B140i SATA controller only.
NOTE: M.2 supports Software RAID only.
NOTE: No HPE Flexible Smart Array supported.
Hard Drive Blank Kits
HPE Large Form Factor Hard Drive Blank Kit 666986-B21
HPE Small Form Factor Hard Drive Blank Kit 666987-B21
Hard Drive Kits
HPE DL380 Gen9 NVMe 6 Solid State Drive Express Bay
Enablement Kit
774741-B21
NOTE: This option provides support for up to 6NVMe drives, and can only be populated in
BAY2 in SFF chassis only, can be used with Bay1 and Bay 3 populated.
NOTE: The HPE DL380 Gen9 High Performance Fan Kit is required for NVMe support
(719079-B21).
NOTE: The PCIe card in this enablement kit can only be populated in slot2 (primary) or slot 5
(secondary).
NOTE: For true x16 support with this option a secondary riser (719073-B21) is needed
(second processor required).
NOTE: Kit includes Mylar film for Universal Media Bay (724865-B21) support to ensure
optimal airflow.
HPE DL380 Gen9 8SFF Bay1 Cage/Backplane Kit 719067-B21
HPE DL380 Gen9 Additional 8SFF Bay2 Cage/Backplane Kit 768857-B21
HPE DL380 Gen9 2SFF Front/Rear SAS/SATA Kit 724864-B21
HPE DL380 Gen9 3LFF Rear SAS/SATA Kit 768856-B21
Media Bay Kits
HPE DL380 Gen9 Universal Media Bay Kit 724865-B21

NOTE: The Universal Media Bay offers front VGA and 2xUSB 2.0, plus ability to add optional
Optical drive, and 2SFF.
NOTE: This is only compatible with the 8SFF or 8+8 SFF configurations and can only be
populated in Bay1.
NOTE: The Universal Media Bay offers front VGA and 2xUSB 2.0, plus ability to add optional
Optical drive, and 2SFF.
NOTE: This is only compatible with the 8SFF or 8+8 SFF configurations and can only be
populated in Bay1.
HPE
Networking
HPE Ethernet 1Gb 4-port 331T Adapter 647594-B21
10 Gigabit Ethernet adapters
HPE Ethernet 10Gb 2-port 530SFP Adapter 652503-B21
HPE Ethernet 10Gb 2-port 562SFP+ Adapter 727055-B21
NOTE: The DL380 Gen9 chassis ships with 4x1Gb Embedded.
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables
for fiber-optic environments must be purchased separately.
25 Gigabit Ethernet adapters
HPE Ethernet 10/25Gb 2-port 640SFP28 Adapter 817753-B21
FlexibleLOM Adapters
HPE Ethernet 1Gb 4-port 331FLR Adapter 629135-B22
HPE Ethernet 1Gb 4-port 366FLR Adapter 665240-B21
HPE FlexFabric 10Gb 2-port 533FLR-T Adapter 700759-B21
HPE FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter 700751-B21
HPE FlexFabric 10Gb 4-port 536FLR-T Adapter 764302-B21
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter 727054-B21
HPE Ethernet 10/25Gb 2-port 640FLR-SFP28 Adapter 817749-B21
HPE FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter 727060-B21

HPE Ethernet 10Gb 2-port 561FLR-T Adapter 700699-B21
NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable
and can be changed from the original configuration after the server is shipped.
NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable
and can be changed from the original configuration after the server is shipped.
HPE
InfiniBand
HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter
HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP
Adapter
764285-B21
HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP
Adapter
764284-B21
HPE 100Gb 1-port OP101 QSFP28 x16 PCIe Gen3 with Intel Omni-
Path Architecture Adapter
829335-B21
HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter 825110-B21
HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter 872725-B21
HPE DL380 Gen9 Primary 2 Slot GPU Ready Riser Kit 719076-B21
NOTE: This is for slot 1 and supports double wide GPGPUs. Slot1: 1xGen3 x16 FH/FL, 1xGen3
x8 FH/HL.
NOTE: For Graphics cards please also order the DL380 Gen9 Graphics Enablement
kit, 719082-B21.
HPE DL380 Gen9 Secondary 3 Slot GPU Ready Riser Kit 719073-B21

HPE I/O
Expansion
Options
NOTE: This is for slot 2 and supports double wide GPGPUs. Slot2: 2xGen3 x16 FH/FL, 1xGen3
x8 FH/HL.
NOTE: For Graphics cards please also order the DL380 Gen9 Graphics Enablement
kit, 719082-B21.
HPE Power
Supplies
HPE 500W Flex Slot Platinum Hot Plug Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94%.
HPE 800W Flex Slot Platinum Hot Plug Power Supply Kit 720479-B21
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94%.
HPE 800W Flex Slot -48VDC Hot Plug Power Supply Kit 720480-B21
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
HPE 1400W Flex Slot Platinum Plus Hot Plug Power Supply Kit 720620-B21
NOTE: Flex Slot Platinum Plus power supplies support power efficiency of up to 94%.
HPE 800W Flex Slot Titanium Hot Plug Power Supply Kit 720482-B21
NOTE: Flex Slot Titanium power supplies support power efficiency of up to 96%.
NOTE: All power supplies must be of the same input voltage, output rating, and efficiency
rating. If non-matching power supplies are installed, you may receive an error message
and/or experience operational issues with your server.
NOTE: Mixing different power supplies in the same server may limit or disable some power
supply features including support for power redundancy. To ensure access to all available
features, all power supplies within the same server should have the same output and
efficiency ratings
NOTE: Prior to selecting a power supply option, it is highly recommended that you review
your server configuration in the HPE Power Advisor tool to determine the right size power
supply for your server configuration.
NOTE: Support for HPE Power Discovery Services is included with the 1400W Flex
Slot option. NOTE: Maximum of 2 Flex Slot PS per platform.
HPE Comput
ation and
NVIDIA Tesla M10 Quad GPU Module Q0J62A
NOTE: This is supported in all server models, however with the following limitations: 4LFF
supported to 35C, 8SFF supported to 35C, 12LFF supported to 30C, 16SFF+Universal Media

Graphics
Accelerators
bay supported to 35C, 16SFF+NVMe cage supported to 35C and 24SFF+2SFF supported to
35C.
NOTE: The Primary GPU riser (719076-B21) is required to support this in slot1.
NOTE: The secondary GPU riser (719073-B21) is required to support this in slot2 (2nd
processor required).
NOTE: For doublewide GPU support you are required to have at least 1x1400W Power
Supply (720620-B21), per card.
NOTE: Double-wide cards require the addition of the High Performance Fan Kit (719079-
B21).
NOTE: Only supported with E5-2600v4 processors.
HPE NVIDIA Tesla M60 Reverse Air Flow Dual GPU PCIe Graphics
Accelerator
M3X67A
NOTE: Maximum 2 supported with both risers, support for 2 cards requires the 1400W
Power Supply (720620-B21) to be selected.
NOTE: Double-wide cards require the addition of the High Performance Fan Kit (719079-
B21).
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: There are limitations operating this card with a 160W processor with operative
environment temperature limitations: 8SFF to 350C, 16 SFF to 250C and 24SFF/12LFF to
200C
NOTE: Additional Grid 2.0 Licensing from NVIDIA is required.
HPE NVIDIA Tesla P4 8GB Computational Accelerator Q0V79A
NOTE: Maximum of 3 cards supported per server.
NOTE: This is supported in all server models.

NOTE: 1x 1400W PS recommended, but this card will work with 1x800W PS (Per GPU).
NOTE: No GPU enablement kit is required for this option.
HPE NVIDIA Tesla P40 24GB Computational Accelerator Q0V80A
NOTE: There are server model limitations with this card: 4LFF supported to 35C, 8SFF
supported to 35C, 12LFF supported to 25C, 16SFF+Universal Media bay supported to 30C,
16SFF+NVMe cage supported to 30C and 24SFF+2SFF supported to 30C.
NOTE: There are limitations on the server model and processor supported when
adding Graphics accelerators.
NOTE: This card will require the addition of the High Performance Fan Kit (719079-B21).
NOTE: This card is supported on the E5-2600v4 series processors only.
HPE NVIDIA Tesla P100 PCIe 16GB Computational Accelerator Q0E21A
supported to 30C, 12LFF not supported, 16SFF+Universal Media bay supported to 30C,
NOTE: There are limitations on the chassis and processor supported when adding Graphics
accelerators.

HPE NVIDIA Quadro P2000 Graphics Accelerator Q0V77A
NOTE: Support with this card limited to 35C for all server permatations.
NOTE: Support with this card limited to 35C for all server permatations.
supported to 30C, 12LFF not supported, 16SFF+Universal Media bay supported to 30C,

HPE NVIDIA Tesla V100 PCIe 16GB Computational Accelerator Q2N68A
HPE AMD FirePro S9150 Accelerator Kit J0H11A
NOTE: 12LFF support is restricted to 30C Server Ambient only.
HPE AMD FirePro S7150x2 Accelerator Kit M3X68A
NOTE: This card only runs at PCIeGen2 speeds.
NOTE: There are limitations operating this card with operative environment temperature
limitations: 12LFF chassis to 300C

NOTE: Each DL380 Gen9 server will accommodate up to three single-width or two double
width PCIe cards for Computational Graphics support. Note that 11.25" is the max length for
a card to also allow for cabling. This applies to primary slots 1 & 2 or secondary slots 4 & 5.
NOTE: The NVIDIA Tesla, GRID and Quadro modules are supported only on 64-bit versions
of Linux and Windows operating systems as well as on Virtual Machine client operating
systems. The supported bare metal operating systems are RHEL6, SLES 11 and Windows
Server 2012 R2.
NOTE: There are limitations on fan types, setting, and server model support by card.
NOTE: Mixing of GPUs is not supported.
NOTE: All NVIDIA, Intel and AMD cards limit configurations to having less than 1TB memory
installed.
NOTE: Double Wide GPUs will occupy slots 2 and 5 and will leave only 2 slots left open.
HPE Cooling
Options
HPE DL380 Gen9 High Performance Fan Kit: 719079-B21
NOTE: High Performance Fan kit consists of 6 fans, these will need to replace all the
standard Fans in the unit, and fill all 6-Fan cages.
NOTE: The 12LFF and 24SFF models (including field upgrades to 24SFF) will already include 6
High Performance Fan kits.
NOTE: The High Performance Fan Kit is needed to support certain Passive GPGPU (Graphics
cards) configurations; or ASHRAE operating environments.
Technical Specifications
System Unit
Dimensions
SFF Drives: 3.44 x 17.54 x 26.75 in (8.73 x 44.55 x 67.94 cm)
LFF Drives: 3.44 x 17.54 x 28.75 in (8.73 x 44.55 x 73.02 cm)
Weight
(approximate)
Minimum:
(Minimum -
8SFF chassis
with 1xSFF
HDD and 7
32.6 lb (14.759 kg)

HDD blanks,
1x processor,
1x power
supply (plus
blank), 1x
Flexible
Smart Array,
1x Riser
installed)
Maximum:
(Maximum -
12 LFF hard
drives (No
rear drives),
2x
processors,
2x power
supplies, 1x
Flexible
Smart Array,
2x Risers
installed)
51.5 lb (23.6 kg)
Input Requirements
(per power supply)
Rated Line
Voltage
100 to 120 VAC
200 to 240 VAC
BTU Rating
Maximum For 800W Power Supply: 3207 BTU/hr (at 100
VAC), 3071 BTU/hr (at 200 VAC), 3112 BTU/hr (at
240 VAC) for China Only
For 500W Power Supply: 1979 BTU/hr (at 100
VAC), 1911 BTU/hr (at 200 VAC), 1965 BTU/hr (at
240 VAC) for China Only
Power Supply Output
(per power supply)
Rated Steady-
State Power
For 1400W Power Supply: 1400W (at 240 VAC),
1400W (at 240 VAC)
800W (at 240 VAC), 800W (at 240 VAC) input for
China only
500W (at 240 VAC), 500W (at 240 VAC) input for
China only
Maximum
Peak Power
For 1400W Power Supply: 1400W (at 200 to 240
1VAC), 1400W (at 240 VAC) input for China only
VAC), 800W (at 200 to 240 1VAC), 800W (at 240
VAC) input for China only

VAC), 500W (at 200 to 240 VAC), 500W (at 240
VAC) input for China only
System Inlet
Temperature
Standard
Operating
Support
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1000 ft) above sea level to a maximum
of 3050 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 20°C/hr
(36°F/hr). The upper limit and rate of change
may be limited by the type and number of
options installed. System performance during
standard operating support may be reduced if
operating with a fan fault or above 30°C (86°F).
Extended
Ambient
Operating
Support
For approved hardware configurations, the
supported system inlet range is extended to be:
5° to 10°C (41° to 50°F) and 35° to 40°C (95° to
104°F) at sea level with an altitude derating of
1.0°C per every 175 m (1.8°F per every 574 ft)
above 900 m (2953 ft) to a maximum of 3050 m
(10,000 ft).
For approved hardware configurations, the
supported system inlet range is extended to be:
40° to 45°C (104° to 113°F) at sea level with an
altitude derating of 1.0°C per every 125 m (1.8°F
per every 410 ft) above 900 m (2953 ft) to a
maximum of 3050 m (10,000 ft).
System performance may be reduced if
operating in the extended ambient operating
range or with a fan fault.
Non-
operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity
Operating Minimum to be the higher (more moisture) of -
12°C (10.4°F) dew point or 8% relative humidity.
Maximum to be the lower (less moisture) of
24°C (75.2°F) dew point or 90% relative
humidity.
(non-condensing)
Non-
operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-
condensing.
Altitude
Operating 3050 m (10,000 ft). This value may be limited by
the type and number of options installed.

Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-
operating
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd)
and declared average bystander position A-Weighted sound
pressure levels (LpAm) when the product is operating in a 23°C
ambient environment. Noise emissions were measured in
accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
Idle
LWAd 4.0 B Entry LFF
4.1 B Entry
4.2 B Base
5.7 B Base LFF
4.3 B Perf
LpAm 23 dBA Entry LFF
24 dBA Entry
24 dBA Base
39 dBA Base LFF
25 dBA Perf
Operating
LWAd 4.3 B Entry LFF
4.6 B Entry
4.8 B Base
5.9 B Base LFF
5.6 B Perf
LpAm 25 dBA Entry LFF
29 dBA Entry
30 dBA Base
31 dBA Base LFF
39 dBA Perf
NOTE: The Listed sound levels apply to standard shipping
configurations (Entry LFF, Entry, Base, Base LFF and Performance
models) additional options may result in increased sound levels.
The Base LFF model leverages our High Efficiency Fans, other
models are shipping with standard fan options.
Emissions Classification
(EMC)
FCC Rating Class A
Normative
Standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;
ICES-003; CNS13438; GB9254; K22;K24; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1

NOTE: Product conformance to cited product specifications is
based on sample (type) testing, evaluation, or assessment. This
product or family of products is eligible to bear the appropriate
compliance logos and statements.
NOTE: The Listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound
levels.
HPE Dynamic
Smart Array
B140i
Controller
Number of PCI links Four
PCI link rate 4Gb/s
Storage protocol support SATA
SAS/SATA peak data
transfer rate
6Gb/s
Number of SAS/SATA
links
10 links
SAS/SATA connectivity 2x4 connectors; 2x1 connectors
Expander support No
Drives supported (max) Up to 10 Internal Drives
RAID support 0, 1, 10, 5 SATA
Software management HPE SSA, SMH, SIM
Warranty Server warranty
HPE Secure Encryption
license
Not Supported
HPE SmartCache License Not Supported
HPE Smart Storage
Administrator
Supported
HPE Ethernet
1Gb
4-port 331i
Adapter
Network Interface 10Base-T/100Base-TX/1000Base-TX
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method PCI Express, two lanes (x2)
Controller BCM5719
Network Transfer Rate
10Base-T (Half-
Duplex)
10 Mb/s per port, 40 Mb/s combined
10Base-T (Full-
Duplex)
100Base-TX
(Half-Duplex)
100Base-TX
(Full-Duplex)
1000Base-TX
(Half and Full-
Duplex)

1000Base-TX
(Full-Duplex)
Connector Four RJ-45
Cable Support
10 Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000
Base-TX
Category 5 or higher UTP; up to 328 ft (100 m)
Where to Buy
Want to buy this series of products? please contact:
● Tel: +1-626-239-8066 (USA)/ +852-3050-1066 / +852-3174-6166
● Fax: +852-3050-1066 (Hong Kong)
● Email: sales@router-switch.com (Sales Inquiries)
Or visit: HPE DL380 Gen9 Server
About us
Router-switch.com (HongKong Yejian Technologies Co., Ltd), founded in 2002, is one of the biggest
Global Network Hardware Supplier. We are a leading provider of network products with 14,500+
customers in over 200 countries. We provide original new and used network equipments (Cisco,
Huawei, HPE, Dell, Juniper, EMC, etc.), including Routers, Switches, Servers, Storage, Telepresence
and Videoconferencing, IP Phones, Firewalls, Wireless APs & Controllers, EHWIC/HWIC/VWIC
Cards, SFPs, Memory & Flash, Hard Disk, Cables, and all kinds of network solutions related
products.
Source
https://h20195.www2.hpe.com/v2/gethtml.aspx?docname=c04375627

HPE ProLiant DL380 Gen9 Server Data Sheet

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to HPE ProLiant DL380 Gen9 Server Data Sheet

Similar to HPE ProLiant DL380 Gen9 Server Data Sheet (20)

More from 美兰曾

More from 美兰曾 (12)

Recently uploaded

Recently uploaded (20)