The AMM-9024CH is a broadband GaAs MMIC distributed amplifier enabling operation over a DC-70 GHz bandwidth. The amplifier features an 11 dB flat gain response, excellent return losses, and a low 2.5 dB noise figure. Available as a wire-bondable die.

The ADM-8095CH is a high-linearity amplifier capable of providing +20 dBm output power up to 10 GHz. The ADM-8095CH can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. The amplifier has excellent return losses and gain flatness.

The ADM-8622PC is a high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. The ADM-8622PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. The amplifier features excellent return losses, gain flatness and high dynamic range making it suitable for RF front-end applications. The size and low power consumption of the ADM-8622PC make it ideal for low SWaP applications.

Amplifier, LNA, 0.75 to 8 GHz, 18 dB, +29 dBm, Connectorized

The ADM-8624PC is a high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth. The amplifier s low power consumption, high dynamic range and ease of use make it an ideal choice for RF front end and signal chain applications.

The ADM-8556 is a wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors. ADM-8556 is available in bare die and connectorized module forms. The amplifier has excellent return losses and gain flatness.

The ADM-8536PSM is the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends. The amplifier is designed for ease of use due to its internal bias network, DC blocking and RF matching. The ADM-8536PSM's compact 1.3 x 2 mm DFN package and low power consumption make it an ideal choice for low SWaP applications.

The ADM-8536PSM is the world's smallest 2-20 GHz high linearity, low noise amplifier solution, featuring 10.5 dB gain, +25 dBm OIP3 and 2.5 dB noise figure, making it suitable for use in RF front-ends. The amplifier is designed for ease of use due to its internal bias network, DC blocking and RF matching. The ADM-8536PSM's compact 1.3 x 2 mm DFN package and low power consumption make it an ideal choice for low SWaP applications.

The ADM-8625PSM is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.5 dB noise figure and +27 dBm OIP3 from 750 MHz to 8 GHz. The ADM-8625PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. The amplifier features excellent return losses, gain flatness and high dynamic range making it suitable for RF front-end applications. The size and low power consumption of the ADM-8625PSM make it ideal for low SWaP applications. The ADM-8625PSM is available in a compact 3x3 mm QFN.

The ADM-8622PSM is a high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity. The ADM-8622PSM performs well down to DC and its low frequency performance is limited only by the frequency response of the input and output bias tees present in the application circuit. The ADM-8622PSM is available in a very compact 1.3x2mm DFN package.

The ADM-8624PSM is a high-linearity, low noise amplifier capable of providing 11.5 dB gain and +25 dBm OIP3 across a broad 0.2-20 GHz bandwidth. The amplifier's low power consumption, high dynamic range and size make it an ideal choice for RF front end, low SWaP applications. Compared to the sister ADM-8475PSM, the ADM-8624PSM has higher gain and lower noise. The ADM-8475PSM has flatter gain and lower return loss. The ADM-8624PSM is available in a compact 1.3 x 2 mm DFN package.

Amplifier, mmWave, LO Driver, 45 to 95 GHz, 11 dB, +19 dBm, Connectorized-M

The AKA-1500PSM is a low-cost, cascadable broadband InGaP HBT amplifier. This is a general-purpose gain block amplifier which provides high P1dB, high OIP3, and a very small form factor. The simple application circuit requires minimal external components, allowing it to be used in a variety of applications.

The AKA-1400PSM is a low-cost, cascadable broadband InGaP HBT amplifier. This is a general-purpose gain block amplifier which provides high P1dB, high OIP3, and a very small form factor. The simple application circuit requires minimal external components, allowing it to be used in a variety of applications.

The AKA-1310PSM is a low-cost, cascadable broadband InGaP HBT amplifier. This is a general-purpose gain block amplifier which provides high P1dB, high OIP3, and a very small form factor. The simple application circuit requires minimal external components, allowing it to be used in a variety of applications.

The AKA-1300PSM is a low-cost, cascadable broadband InGaP HBT amplifier. This is a general-purpose gain block amplifier which provides high P1dB, high OIP3, and a very small form factor. The simple application circuit requires minimal external components, allowing it to be used in a variety of applications.

The ADM-8096CH is a high-linearity low noise amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM-8096CH can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. The amplifier has excellent return losses and gain flatness.

The ADM-8350PSM is a high-linearity, low noise amplifier capable of providing +22 dBm output power up to 6 GHz. The ADM-8350PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. The amplifier has excellent return losses, gain flatness, and high IP3. The ADM-8350PSM is similar to the ADM-8095. The main difference is that the IP3 is higher for the ADM-8350, but the current consumption is about 25% higher.

The ADM3-00001PD is a high-gain, broadband 3-stage amplifier capable of providing +21 dBm output power up to 18 GHz. This amplifier features a flat group delay, fast rise time response, and low noise figure. This product is an unprotected amplifier module intended for lab use.

The ADM1-8096PC is a high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. The amplifier has excellent return losses and gain flatness.

The ADM1-8095PC is a high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers. The amplifier has excellent return losses and gain flatness.

The APM-7516PSM is a broadband low phase noise driver amplifier designed to provide enough power to drive the LO port of an H or L-diode mixer with a range of input powers. This amplifier uses GaAs HBT technology for low phase noise and provides +18 to 23 dBm output power from 1.5 GHz to 20 GHz. This amplifier can be operated with a variety of bias conditions for both low and high-power applications. The APM-7516SM shows less variation in current supply under saturation than similar HBT amplifiers, has a lower thermal resistance, and is less sensitive to damage from high input powers. The APM-7516PSM is packaged in a compact 4 mm QFN with integrated blocking capacitors and power supply inductor for surface mount integration on circuit board-based systems.

The A-3567UC is a broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz. It also has built-in DC blocking capacitors on the input and output.A-3567UC is a broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz. It also has built-in DC blocking capacitors on the input and output.

Amplifier, Low Phase Noise, 0.1 to 22 GHz, 14 dB, +18 dBm, Connectorized-PA