Table of Contents
Advertisement
Chapter 10: Verifying the Hardware Operations of the Chassis
216
2. Compare the version number displayed by the SHOW VERSION
command with the information in Table 26 on page 84 to confirm that
the version of the AlliedWare Plus Operating System on the controller
card supports all the hardware components in the chassis. If
necessary, update the management software on the controller card.
3. To display the status of the power supplies, fan module, and AT-
SBx81CFC400 Controller Fabric Cards, use the SHOW SYSTEM
ENVIRONMENT command in the User Exec or Privileged Exec mode.
The Status column in the display provides the states of the modules.
Components are operating normally when they have an "Ok" status.
4. To display the status of the line cards, use the SHOW CARD
command in the Privileged Exec mode A line card has a state of
"Online" when it is operating normally. An example of the status
information is shown in Figure 144.
awplus# show card
Slot
Card Type
---------------------------------------------------
1
AT-SBx81GP24
2
AT-SBx81XS6
3
AT-SBx81GP24
4
AT-SBx81GS24a
5
AT-SBx81CFC400
6
AT-SBx81CFC400
7
AT-SBx81GP24
8
AT-SBx81GS24a
9
AT-SBx81GP24
10
AT-SBx81XS6
11
AT-SBx81GP24
12
AT-SBx81GS24a
Figure 144. SHOW CARD Command
5. To display the states of the individual ports on the Ethernet line cards,
use the SHOW INTERFACE STATUS command in the Privileged
Exec mode.
6. To check the status of PoE on the ports of the AT-SBx81GP24 Line
Card, use the SHOW POWER-INLINE or SHOW POWER-INLINE
INTERFACE command in the User Exec or Privileged Exec mode.
For information about the command line interface, refer to the
Software Reference for SwitchBlade x8100 Series Switches on the
Allied Telesis web site.
State
Online
Online
Online
Online
Online (Active)
Online (Standby)
Online
Online
Online
Online
Online
Online
Advertisement
Table of Contents
